tempest-react-sdk 0.55.0 → 0.56.0

package/dist/imaging.d.ts

@@ -12,528 +12,645 @@
  */
 export declare function bestSupportedType(preferences?: readonly ImageType[]): Promise<ImageType>;
 
-/** What {@link compressToTarget} produced. */
-export declare interface CompressedImage extends ProcessedImage {
-    /** The quality it settled on. */
-    readonly quality: number;
-    /** How many encodes it took. */
-    readonly attempts: number;
+/** An encoded frame, and where in the video it came from. */
+export declare interface CapturedFrame extends ProcessedImage {
     /**
-     * Whether the result actually fits the budget.
+     * The instant actually captured, in milliseconds.
      *
-     * `false` means the image could not reach it even at `minQuality` —
-     * reported rather than thrown, because a 2.1 MB result against a 2 MB
-     * budget is usually still worth uploading, and that call is the
-     * caller's.
+     * Not necessarily the `atMs` asked for: a seek lands on a frame boundary,
+     * so a request for 12 500 ms in a 30 fps video captures 12 500 at best and
+     * 12 466,67 in practice. Report this one, not the request.
      */
-    readonly withinBudget: boolean;
-}
-
-/** Options for {@link compressToTarget}. */
-export declare interface CompressOptions extends ResizeOptions {
-    /** Byte budget the result must fit in. */
-    readonly maxBytes: number;
-    /** Lowest quality worth producing. Defaults to `0.4`. */
-    readonly minQuality?: number;
-    /** Highest quality to start from. Defaults to `0.92`. */
-    readonly maxQuality?: number;
-    /** Search steps. Defaults to `6`, which resolves quality to ~1%. */
-    readonly steps?: number;
+    readonly atMs: number;
+    /**
+     * Whether a newly presented frame was observed before the pixels were read.
+     *
+     * `true` only when `requestVideoFrameCallback` reported a frame going to
+     * the compositor. Measured in Chromium, 2026-09-04: that callback fires
+     * while a video **plays** and does **not** fire for a seek on a paused
+     * element — so capturing from a playing video (a screen-recording print)
+     * can be confirmed, and **capturing at an `atMs` reports `false`**, having
+     * settled on `seeked` plus two animation frames instead.
+     *
+     * So `false` is the normal result for a seek, not a warning. It says the
+     * capture is best effort by the standard of what browsers expose, and
+     * treating it as a failure would reject the majority of correct captures.
+     */
+    readonly confirmed: boolean;
 }
 
 /**
- * Compress an image until it fits a byte budget.
+ * Capture a frame from a video as encoded image bytes.
  *
- * @example
+ * Without `atMs` it reads the frame on screen, which is what a screen or camera
+ * recording wants — a print of what is being recorded. With `atMs` it seeks,
+ * waits for that instant's frame to be presented, captures, and puts the player
+ * back.
+ *
+ * @example Print of a screen recording in progress
  * ```ts
- * const upload = await compressToTarget(file, {
- *     maxBytes: 2 * 1024 * 1024,
- *     width: 2000,
+ * const shot = await captureFrame(videoRef.current!, {
  *     type: "image/webp",
+ *     quality: 0.9,
  * });
- *
- * if (!upload.withinBudget) {
- *     console.warn(`still ${upload.bytes} bytes at quality ${upload.quality}`);
- * }
+ * await shareOrDownloadBlob(shot.blob, "print.webp");
  * ```
  *
- * Resizing first is what usually does the work: halving the long edge
- * removes three quarters of the pixels, which no quality setting matches.
- * Pass `width`/`height` when the source is a full-resolution photo.
+ * @example A poster from ten seconds in, scaled down
+ * ```ts
+ * const poster = await captureFrame(video, { atMs: 10_000, width: 640 });
+ * setPosterUrl(URL.createObjectURL(poster.blob));
+ * console.log(`landed on ${poster.atMs}ms`);
+ * ```
  *
- * @param source Anything decodable.
- * @param options Byte budget plus the usual resize and format options.
- * @returns The best result found, and whether it fits.
- * @throws {@link ImageDecodeError} when the source cannot be decoded.
-     */
- export declare function compressToTarget(source: ImageSource, options: CompressOptions): Promise<CompressedImage>;
-
- /**
-  * Create a drawing surface, preferring `OffscreenCanvas`.
-  *
-  * `OffscreenCanvas` works inside a worker, which is where a PWA wants this
-  * running: resizing a 12-megapixel photo on the main thread blocks the UI
-  * for tens of milliseconds per image.
-  *
-  * @param width Surface width in pixels.
-  * @param height Surface height in pixels.
-  * @returns The surface.
-  * @throws {@link ImagingUnavailableError} when neither kind exists — a
-      *   server render, or a test environment without a canvas.
-      */
-  export declare function createSurface(width: number, height: number): Surface;
-
-  /**
-   * Produce several sizes from a single decode.
-   *
-   * @example
-   * ```ts
-   * const [thumb, card] = await createThumbnails(file, [
-   *     { name: "thumb", size: 96 },
-   *     { name: "card", size: 480 },
-   * ]);
-   * ```
-   *
-   * Sizes are the **longest edge**, and the aspect ratio is kept, so a
-   * portrait and a landscape photo both fit the same grid cell without a
-   * separate calculation per orientation.
-   *
-   * @param source Anything decodable.
-   * @param specs The sizes to produce.
-   * @param options Shared format and quality.
-   * @returns One result per spec, in the order requested.
-   * @throws {@link ImageDecodeError} when the source cannot be decoded.
-       */
-   export declare function createThumbnails(source: ImageSource, specs: readonly ThumbnailSpec[], options?: EncodeOptions): Promise<Thumbnail[]>;
-
-   /**
-    * Crop a rectangle out of an image, in source pixels.
-    *
-    * The rectangle is clamped to the image, so a crop dragged past the edge
-    * produces a smaller result instead of transparent padding.
-    *
-    * @example
-    * ```ts
-    * const badge = await cropImage(file, { x: 120, y: 80, width: 400, height: 400 });
-    * ```
-    *
-    * @param source Anything decodable.
-    * @param rect The region to keep.
-    * @param options Format and quality.
-    * @returns The encoded crop.
-    * @throws {@link ImageDecodeError} when the source cannot be decoded.
-        */
-    export declare function cropImage(source: ImageSource, rect: CropRect, options?: EncodeOptions): Promise<ProcessedImage>;
-
-    /** A rectangle in source pixels. */
-    export declare interface CropRect {
-        readonly x: number;
-        readonly y: number;
-        readonly width: number;
-        readonly height: number;
-    }
-
-    /** A decoded image, ready to draw. */
-    export declare interface DecodedImage {
-        /** The pixels. */
-        readonly bitmap: ImageBitmap;
-        /** Width in pixels, after orientation was applied. */
-        readonly width: number;
-        /** Height in pixels, after orientation was applied. */
-        readonly height: number;
-    }
-
-    /**
-     * Decode any supported source into a bitmap, oriented as the photographer
-     * held the camera.
-     *
-     * @example
-     * ```ts
-     * const { bitmap, width, height } = await decodeImage(file);
-     * ```
-     *
-     * @param source A `Blob`/`File`, URL string, `ImageBitmap`, `ImageData`,
-     *   `HTMLImageElement`, or a canvas.
-     * @returns The decoded pixels and their dimensions.
-     * @throws {@link ImageDecodeError} when the bytes are not a decodable image,
-         *   or the URL cannot be fetched.
-         */
-     export declare function decodeImage(source: ImageSource): Promise<DecodedImage>;
-
-     /** Background used when a format cannot carry transparency. */
-     export declare const DEFAULT_BACKGROUND = "#ffffff";
-
-     /** Search steps when the caller does not choose. */
-     export declare const DEFAULT_COMPRESS_STEPS = 6;
-
-     /** Highest quality to start from by default. */
-     export declare const DEFAULT_MAX_QUALITY = 0.92;
-
-     /** Lowest quality worth producing by default. */
-     export declare const DEFAULT_MIN_QUALITY = 0.4;
-
-     /** Quality used when the caller does not choose. */
-     export declare const DEFAULT_QUALITY = 0.85;
-
-     /** Format used when the caller does not choose. */
-     export declare const DEFAULT_TYPE: ImageType;
-
-     /**
-      * Draw a bitmap into a surface with high-quality filtering.
-      *
-      * @param bitmap The source pixels.
-      * @param target Destination surface.
-      * @param box Where to draw inside the destination.
-      * @param background Fill painted before drawing.
-      *
-      * @tempest-limits param-count — source, destination, destination geometry, and an
-      * optional background: the same four things `CanvasRenderingContext2D.drawImage`
-      * takes, in the same order. Public surface, and a wrapper over a browser primitive
-      * reads best when it keeps that primitive's shape.
-      */
-     export declare function drawScaled(bitmap: ImageBitmap, target: Surface, box: {
-         x: number;
-         y: number;
-         width: number;
-         height: number;
-     }, background?: string): void;
-
-     /**
-      * Encode a surface into image bytes.
-      *
-      * @param surface The canvas to encode.
-      * @param options Format and quality.
-      * @returns The blob plus the dimensions and the type actually produced.
-      * @throws {@link ImageEncodeError} when the canvas produces nothing.
-          */
-      export declare function encodeImage(surface: Surface, options?: EncodeOptions): Promise<ProcessedImage>;
-
-      /** Options for {@link encodeImage}. */
-      export declare interface EncodeOptions {
-          /** Output format. Defaults to `image/jpeg`. */
-          readonly type?: ImageType;
-          /** Quality for lossy formats, `0`-`1`. Defaults to `0.85`. */
-          readonly quality?: number;
-      }
-
-      /**
-       * Mirror an image horizontally, vertically, or both.
-       *
-       * @example
-       * ```ts
-       * const selfie = await flipImage(capture, { horizontal: true });
-       * ```
-       *
-       * @param source Anything decodable.
-       * @param axes Which axes to mirror.
-       * @param options Format and quality.
-       * @returns The flipped image.
-       * @throws {@link ImageDecodeError} when the source cannot be decoded.
-           */
-       export declare function flipImage(source: ImageSource, axes: {
-           horizontal?: boolean;
-           vertical?: boolean;
-       }, options?: EncodeOptions): Promise<ProcessedImage>;
-
-       /**
-        * Get a 2-D context configured for image work.
-        *
-        * `imageSmoothingQuality = "high"` is the setting that makes a steep
-        * downscale average its source pixels instead of sampling them sparsely.
-        *
-        * @param surface The surface to draw on.
-        * @param background Optional fill painted before anything else.
-        * @returns The context.
-        * @throws {@link ImagingUnavailableError} when the context cannot be created.
-            */
-        export declare function getContext(surface: Surface, background?: string): SurfaceContext;
-
-        /** The source could not be decoded into pixels. */
-        export declare class ImageDecodeError extends ImagingError {
-            constructor(message: string, options?: ErrorOptions);
-        }
-
-        /** The canvas could not produce encoded bytes. */
-        export declare class ImageEncodeError extends ImagingError {
-            constructor(message: string, options?: ErrorOptions);
-        }
-
-        /** What a file holds, without decoding all of it. */
-        export declare interface ImageInfo {
-            readonly width: number;
-            readonly height: number;
-            /** MIME type as reported by the blob. */
-            readonly type: string;
-            /** Size in bytes. */
-            readonly bytes: number;
-            /** `width / height`. */
-            readonly aspectRatio: number;
-        }
-
-        /** Lifecycle of a processing call. */
-        export declare type ImageProcessingStatus = "idle" | "working" | "done" | "error";
-
-        /**
-         * Types for browser-side image processing.
-         */
-        /** Anything the module can decode. */
-        export declare type ImageSource = Blob | File | ImageBitmap | ImageData | HTMLImageElement | HTMLCanvasElement | OffscreenCanvas | string;
-
-        /** Encodable image formats. */
-        export declare type ImageType = "image/jpeg" | "image/png" | "image/webp" | "image/avif";
-
-        /**
-         * Errors thrown by the imaging module.
-         *
-         * `name` is a literal string on every subclass: minifiers rename classes,
-         * and a derived `new.target.name` ships as `error.name === "t"`.
-         */
-        /** Base class for every error this module throws. */
-        export declare class ImagingError extends Error {
-            constructor(message: string, options?: ErrorOptions);
-        }
-
-        /** The environment has no canvas to draw on. */
-        export declare class ImagingUnavailableError extends ImagingError {
-            constructor(message: string, options?: ErrorOptions);
-        }
-
-        /** The result of an operation that produced an encoded image. */
-        export declare interface ProcessedImage {
-            /** The encoded bytes. */
-            readonly blob: Blob;
-            /** Output width. */
-            readonly width: number;
-            /** Output height. */
-            readonly height: number;
-            /** Output format actually produced — not necessarily the one asked for. */
-            readonly type: string;
-            /** Size in bytes. */
-            readonly bytes: number;
-        }
-
-        /**
-         * Read an image's dimensions, type and size.
-         *
-         * Decodes to measure, which is the only reliable way in a browser — there
-         * is no header parser here, and guessing dimensions from a MIME type is not
-         * a thing. Cheap enough for a preview, not for a thousand files in a loop.
-         *
-         * @example
-         * ```ts
-         * const info = await readImageInfo(file);
-         * if (info.bytes > 5_000_000) {
-         *     // ask before uploading
-         * }
-         * ```
-         *
-         * @param blob The image file.
-         * @returns Its dimensions, MIME type, byte size and aspect ratio.
-         * @throws {@link ImageDecodeError} when the blob is not a decodable image.
+ * @param video The element to read. It needs data — the capture waits for
+ *   `loadeddata` when the element has none yet.
+ * @param options Instant, output box, format, and how long to wait.
+ * @returns The encoded frame, the instant it actually came from, and whether a
+ *   presented frame confirmed that instant.
+ * @throws {@link FrameSeekError} when the video has no data or no timeline in
+     *   time, or the seek did not land.
+     * @throws {@link ImageDecodeError} when the pixels cannot be read — a
+         *   cross-origin video without `crossOrigin` is the common one.
+         * @throws {@link ImageEncodeError} when the canvas produces no bytes.
              */
-         export declare function readImageInfo(blob: Blob): Promise<ImageInfo>;
+         export declare function captureFrame(video: HTMLVideoElement, options?: CaptureFrameOptions): Promise<CapturedFrame>;
+
+         /** Options for {@link captureFrame}. */
+         export declare interface CaptureFrameOptions extends ResizeOptions {
+             /**
+              * Instant to capture, in milliseconds. Left out: the frame on screen now.
+              *
+              * Clamped to the video's duration. Seeking snaps to a frame boundary, so
+              * the frame you get is the one **containing** this instant — the result
+              * reports where it actually landed in {@link CapturedFrame.atMs}.
+              */
+             readonly atMs?: number;
+             /**
+              * Put `currentTime` and playback back where they were. Default `true`.
+              *
+              * Only relevant with `atMs`: capturing the current frame moves nothing.
+              * Pass `false` when the capture is meant to leave the player parked on the
+              * frame it took.
+              */
+             readonly restore?: boolean;
+             /**
+              * How long to wait for the seek and for the frame after it. Default `3000`.
+              *
+              * Reached means {@link FrameSeekError}, never a frame from the wrong
+              * instant: a picture of the wrong moment is worse than an error, because
+              * nothing downstream can tell.
+              */
+             readonly timeoutMs?: number;
+             /** Abort the capture. Rejects with an `AbortError` `DOMException`. */
+             readonly signal?: AbortSignal;
+         }
+
+         /** What {@link compressToTarget} produced. */
+         export declare interface CompressedImage extends ProcessedImage {
+             /** The quality it settled on. */
+             readonly quality: number;
+             /** How many encodes it took. */
+             readonly attempts: number;
+             /**
+              * Whether the result actually fits the budget.
+              *
+              * `false` means the image could not reach it even at `minQuality` —
+              * reported rather than thrown, because a 2.1 MB result against a 2 MB
+              * budget is usually still worth uploading, and that call is the
+              * caller's.
+              */
+             readonly withinBudget: boolean;
+         }
+
+         /** Options for {@link compressToTarget}. */
+         export declare interface CompressOptions extends ResizeOptions {
+             /** Byte budget the result must fit in. */
+             readonly maxBytes: number;
+             /** Lowest quality worth producing. Defaults to `0.4`. */
+             readonly minQuality?: number;
+             /** Highest quality to start from. Defaults to `0.92`. */
+             readonly maxQuality?: number;
+             /** Search steps. Defaults to `6`, which resolves quality to ~1%. */
+             readonly steps?: number;
+         }
 
          /**
-          * How a resize fits the requested box.
-          *
-          * - `contain`: the whole image fits inside the box; the result may be
-          *   smaller than the box in one dimension.
-          * - `cover`: the box is filled; the overflow is cropped, centred.
-          * - `fill`: the image is stretched to the box, changing its aspect ratio.
-          * - `pad`: like `contain`, but the result is exactly the box, with the
-          *   remainder painted in `background`.
-          */
-         export declare type ResizeFit = "contain" | "cover" | "fill" | "pad";
-
-         /**
-          * Resize an image, re-encoding it.
+          * Compress an image until it fits a byte budget.
           *
           * @example
           * ```ts
-          * const resized = await resizeImage(file, { width: 1600, type: "image/webp" });
-          * console.log(resized.width, resized.bytes, resized.type);
+          * const upload = await compressToTarget(file, {
+          *     maxBytes: 2 * 1024 * 1024,
+          *     width: 2000,
+          *     type: "image/webp",
+          * });
+          *
+          * if (!upload.withinBudget) {
+          *     console.warn(`still ${upload.bytes} bytes at quality ${upload.quality}`);
+          * }
           * ```
           *
+          * Resizing first is what usually does the work: halving the long edge
+          * removes three quarters of the pixels, which no quality setting matches.
+          * Pass `width`/`height` when the source is a full-resolution photo.
+          *
           * @param source Anything decodable.
-          * @param options Target box, fit, format and quality.
-          * @returns The encoded result.
+          * @param options Byte budget plus the usual resize and format options.
+          * @returns The best result found, and whether it fits.
           * @throws {@link ImageDecodeError} when the source cannot be decoded.
-              * @throws {@link ImageEncodeError} when the canvas produces no bytes.
+              */
+          export declare function compressToTarget(source: ImageSource, options: CompressOptions): Promise<CompressedImage>;
+
+          /**
+           * Create a drawing surface, preferring `OffscreenCanvas`.
+           *
+           * `OffscreenCanvas` works inside a worker, which is where a PWA wants this
+           * running: resizing a 12-megapixel photo on the main thread blocks the UI
+           * for tens of milliseconds per image.
+           *
+           * @param width Surface width in pixels.
+           * @param height Surface height in pixels.
+           * @returns The surface.
+           * @throws {@link ImagingUnavailableError} when neither kind exists — a
+               *   server render, or a test environment without a canvas.
+               */
+           export declare function createSurface(width: number, height: number): Surface;
+
+           /**
+            * Produce several sizes from a single decode.
+            *
+            * @example
+            * ```ts
+            * const [thumb, card] = await createThumbnails(file, [
+            *     { name: "thumb", size: 96 },
+            *     { name: "card", size: 480 },
+            * ]);
+            * ```
+            *
+            * Sizes are the **longest edge**, and the aspect ratio is kept, so a
+            * portrait and a landscape photo both fit the same grid cell without a
+            * separate calculation per orientation.
+            *
+            * @param source Anything decodable.
+            * @param specs The sizes to produce.
+            * @param options Shared format and quality.
+            * @returns One result per spec, in the order requested.
+            * @throws {@link ImageDecodeError} when the source cannot be decoded.
+                */
+            export declare function createThumbnails(source: ImageSource, specs: readonly ThumbnailSpec[], options?: EncodeOptions): Promise<Thumbnail[]>;
+
+            /**
+             * Crop a rectangle out of an image, in source pixels.
+             *
+             * The rectangle is clamped to the image, so a crop dragged past the edge
+             * produces a smaller result instead of transparent padding.
+             *
+             * @example
+             * ```ts
+             * const badge = await cropImage(file, { x: 120, y: 80, width: 400, height: 400 });
+             * ```
+             *
+             * @param source Anything decodable.
+             * @param rect The region to keep.
+             * @param options Format and quality.
+             * @returns The encoded crop.
+             * @throws {@link ImageDecodeError} when the source cannot be decoded.
+                 */
+             export declare function cropImage(source: ImageSource, rect: CropRect, options?: EncodeOptions): Promise<ProcessedImage>;
+
+             /** A rectangle in source pixels. */
+             export declare interface CropRect {
+                 readonly x: number;
+                 readonly y: number;
+                 readonly width: number;
+                 readonly height: number;
+             }
+
+             /** A decoded image, ready to draw. */
+             export declare interface DecodedImage {
+                 /** The pixels. */
+                 readonly bitmap: ImageBitmap;
+                 /** Width in pixels, after orientation was applied. */
+                 readonly width: number;
+                 /** Height in pixels, after orientation was applied. */
+                 readonly height: number;
+             }
+
+             /**
+              * Decode any supported source into a bitmap, oriented as the photographer
+              * held the camera.
+              *
+              * @example
+              * ```ts
+              * const { bitmap, width, height } = await decodeImage(file);
+              * ```
+              *
+              * @param source A `Blob`/`File`, URL string, `ImageBitmap`, `ImageData`,
+              *   `HTMLImageElement`, or a canvas.
+              * @returns The decoded pixels and their dimensions.
+              * @throws {@link ImageDecodeError} when the bytes are not a decodable image,
+                  *   or the URL cannot be fetched.
                   */
-              export declare function resizeImage(source: ImageSource, options?: ResizeOptions): Promise<ProcessedImage>;
-
-              /** Options for {@link resizeImage}. */
-              export declare interface ResizeOptions extends EncodeOptions {
-                  /** Target width in pixels. */
-                  readonly width?: number;
-                  /** Target height in pixels. */
-                  readonly height?: number;
-                  /** How the image fits the box. Defaults to `contain`. */
-                  readonly fit?: ResizeFit;
-                  /** Fill colour for `pad`, and behind transparency when encoding JPEG. */
-                  readonly background?: string;
-                  /**
-                   * Never scale an image up.
-                   *
-                   * On by default: enlarging a photo adds no detail and multiplies the
-                   * bytes, which is the opposite of what a resize is usually for.
-                   */
-                  readonly withoutEnlargement?: boolean;
-              }
+              export declare function decodeImage(source: ImageSource): Promise<DecodedImage>;
+
+              /** Background used when a format cannot carry transparency. */
+              export declare const DEFAULT_BACKGROUND = "#ffffff";
+
+              /** Search steps when the caller does not choose. */
+              export declare const DEFAULT_COMPRESS_STEPS = 6;
+
+              /** How long a seek and the frame after it may take, in milliseconds. */
+              export declare const DEFAULT_FRAME_TIMEOUT_MS = 3000;
+
+              /** Highest quality to start from by default. */
+              export declare const DEFAULT_MAX_QUALITY = 0.92;
+
+              /** Lowest quality worth producing by default. */
+              export declare const DEFAULT_MIN_QUALITY = 0.4;
+
+              /** Quality used when the caller does not choose. */
+              export declare const DEFAULT_QUALITY = 0.85;
+
+              /** Format used when the caller does not choose. */
+              export declare const DEFAULT_TYPE: ImageType;
 
               /**
-               * Rotate an image by a multiple of 90 degrees.
+               * Draw a bitmap into a surface with high-quality filtering.
                *
-               * Restricted to right angles on purpose: an arbitrary angle needs a
-               * decision about the corners (crop, pad, or grow the canvas) that belongs
-               * to the caller's design, not to a utility default.
+               * @param bitmap The source pixels.
+               * @param target Destination surface.
+               * @param box Where to draw inside the destination.
+               * @param background Fill painted before drawing.
                *
-               * @example
-               * ```ts
-               * const upright = await rotateImage(file, 90);
-               * ```
+               * @tempest-limits param-count — source, destination, destination geometry, and an
+               * optional background: the same four things `CanvasRenderingContext2D.drawImage`
+               * takes, in the same order. Public surface, and a wrapper over a browser primitive
+               * reads best when it keeps that primitive's shape.
+               */
+              export declare function drawScaled(bitmap: ImageBitmap, target: Surface, box: {
+                  x: number;
+                  y: number;
+                  width: number;
+                  height: number;
+              }, background?: string): void;
+
+              /**
+               * Encode a surface into image bytes.
                *
-               * @param source Anything decodable.
-               * @param degrees `90`, `180`, `270` — or any multiple, normalised.
+               * @param surface The canvas to encode.
                * @param options Format and quality.
-               * @returns The rotated image.
-               * @throws {@link ImageDecodeError} when the source cannot be decoded.
-                   * @throws {@link RangeError} when the angle is not a multiple of 90.
-                       */
-                   export declare function rotateImage(source: ImageSource, degrees: number, options?: EncodeOptions): Promise<ProcessedImage>;
-
-                   /**
-                    * Whether this browser can actually encode a format.
-                    *
-                    * Asks for a 1x1 image in that type and checks what came back, because
-                    * that is the only answer that counts: a browser that "supports" WebP for
-                    * display may still not encode it.
-                    *
-                    * @example
-                    * ```ts
-                    * const type = (await supportsImageType("image/webp")) ? "image/webp" : "image/jpeg";
-                    * const resized = await resizeImage(file, { width: 1200, type });
-                    * ```
-                    *
-                    * @param type The format to test.
-                    * @returns Whether encoding produces that type. Cached per type.
-                    */
-                   export declare function supportsImageType(type: ImageType): Promise<boolean>;
-
-                   /**
-                    * The drawing surface, and the one thing everyone gets wrong on it.
-                    *
-                    * **JPEG has no alpha.** Encoding a transparent PNG as JPEG paints the
-                    * transparent pixels black. Filling the surface first is the difference
-                    * between a photo on a white background and one with a black hole in it.
-                    *
-                    * What is *not* here is worth recording. The received wisdom for downscaling
-                    * on a canvas is to halve repeatedly, because a single `drawImage` into a
-                    * much smaller box was said to alias. That was implemented here, and then
-                    * measured: on a 512 px checkerboard reduced to 32 px, the stepwise result
-                    * and the single high-quality draw were **pixel-identical** (standard
-                    * deviation 0.0 on both) in Chromium and Firefox — while stepwise cost
-                    * **39.19 ms against 0.13 ms** on a 4000x3000 photo, 300 times more, and
-                    * allocated three intermediate canvases on a device that may not have the
-                    * memory. Modern engines honour `imageSmoothingQuality = "high"`, which is
-                    * what this module sets. The halving was deleted rather than kept "just in
-                    * case": unmeasurable benefit at 300x the cost is not insurance, it is
-                    * ballast.
-                    */
-                   /** A canvas this module can draw on, on the main thread or in a worker. */
-                   export declare type Surface = OffscreenCanvas | HTMLCanvasElement;
-
-                   /** A 2-D context from either surface kind. */
-                   export declare type SurfaceContext = OffscreenCanvasRenderingContext2D | CanvasRenderingContext2D;
-
-                   /** A produced thumbnail. */
-                   export declare interface Thumbnail extends ProcessedImage {
-                       readonly name: string;
-                   }
-
-                   /** One requested size. */
-                   export declare interface ThumbnailSpec {
-                       /** Name to find it by in the result. */
-                       readonly name: string;
-                       /** Longest edge in pixels. */
-                       readonly size: number;
-                       /** Format and quality, overriding the shared options. */
-                       readonly encode?: EncodeOptions;
-                   }
-
-                   /**
-                    * The browser cannot encode the requested format.
-                    *
-                    * Worth its own class because the failure is otherwise silent: asking a
-                    * canvas for an unsupported type does not throw — it hands back a PNG,
-                    * and an app that trusted the request ships 4 MB where it expected 300 KB.
-                    */
-                   export declare class UnsupportedImageTypeError extends ImagingError {
-                       constructor(message: string, options?: ErrorOptions);
-                   }
-
-                   /**
-                    * Hold an object URL for a blob, and revoke it when it is replaced.
-                    *
-                    * @example
-                    * ```tsx
-                    * function Preview({ file }: { file: File | null }) {
-                    *     const { url } = useImagePreview(file);
-                    *     return url === null ? null : <img src={url} alt="" />;
-                    * }
-                    * ```
-                    *
-                    * @param source The blob to preview, or `null`.
-                    * @returns The object URL, valid until the source changes or the component
-                    *   unmounts.
-                    */
-                   export declare function useImagePreview(source: Blob | null | undefined): UseImagePreviewResult;
-
-                   /** What {@link useImagePreview} returns. */
-                   export declare interface UseImagePreviewResult {
-                       /** Object URL for the current source, or `null`. */
-                       readonly url: string | null;
-                   }
-
-                   /**
-                    * Run image operations with status tracking, safe against unmount.
-                    *
-                    * @example
-                    * ```tsx
-                    * function Upload() {
-                    *     const { compress, isWorking, result } = useImageProcessing();
-                    *
-                    *     async function onPick(file: File) {
-                    *         const ready = await compress(file, { maxBytes: 1_000_000, width: 1600 });
-                    *         await fetch("/api/photos", { method: "POST", body: ready.blob });
-                    *     }
-                    *
-                    *     return <input type="file" disabled={isWorking} onChange={(e) => onPick(e.target.files![0]!)} />;
-                    * }
-                    * ```
-                    *
-                    * The returned promises still reject on failure, so a caller can `try`
-                    * around them; `status` and `error` exist for rendering, not for swallowing
-                    * the failure.
-                    *
-                    * @returns The operations plus their state.
+               * @returns The blob plus the dimensions and the type actually produced.
+               * @throws {@link ImageEncodeError} when the canvas produces nothing.
+                   */
+               export declare function encodeImage(surface: Surface, options?: EncodeOptions): Promise<ProcessedImage>;
+
+               /** Options for {@link encodeImage}. */
+               export declare interface EncodeOptions {
+                   /** Output format. Defaults to `image/jpeg`. */
+                   readonly type?: ImageType;
+                   /** Quality for lossy formats, `0`-`1`. Defaults to `0.85`. */
+                   readonly quality?: number;
+               }
+
+               /**
+                * Mirror an image horizontally, vertically, or both.
+                *
+                * @example
+                * ```ts
+                * const selfie = await flipImage(capture, { horizontal: true });
+                * ```
+                *
+                * @param source Anything decodable.
+                * @param axes Which axes to mirror.
+                * @param options Format and quality.
+                * @returns The flipped image.
+                * @throws {@link ImageDecodeError} when the source cannot be decoded.
                     */
-                   export declare function useImageProcessing(): UseImageProcessingResult;
-
-                   /** What {@link useImageProcessing} returns. */
-                   export declare interface UseImageProcessingResult {
-                       /** Resize (and re-encode) an image. */
-                       readonly resize: (source: ImageSource, options?: ResizeOptions) => Promise<ProcessedImage>;
-                       /** Compress an image into a byte budget. */
-                       readonly compress: (source: ImageSource, options: CompressOptions) => Promise<CompressedImage>;
-                       /** The most recent result. */
-                       readonly result: ProcessedImage | null;
-                       /** Where the last call is. */
-                       readonly status: ImageProcessingStatus;
-                       /** Why the last call failed. */
-                       readonly error: Error | null;
-                       /** Whether a call is in flight. */
-                       readonly isWorking: boolean;
-                   }
-
-                   export { }
+                export declare function flipImage(source: ImageSource, axes: {
+                    horizontal?: boolean;
+                    vertical?: boolean;
+                }, options?: EncodeOptions): Promise<ProcessedImage>;
+
+                /**
+                 * The frame asked for never arrived.
+                 *
+                 * Its own class because the alternative is the failure this module refuses to
+                 * produce: a frame from the wrong instant. `seeked` firing does not mean the
+                 * frame for the new position is composited and readable, so a capture that
+                 * gave up waiting has to say so — a thumbnail of the neighbouring frame looks
+                 * exactly like a correct one, and nothing downstream can tell.
+                 */
+                export declare class FrameSeekError extends ImagingError {
+                    constructor(message: string, options?: ErrorOptions);
+                }
+
+                /**
+                 * Get a 2-D context configured for image work.
+                 *
+                 * `imageSmoothingQuality = "high"` is the setting that makes a steep
+                 * downscale average its source pixels instead of sampling them sparsely.
+                 *
+                 * @param surface The surface to draw on.
+                 * @param background Optional fill painted before anything else.
+                 * @returns The context.
+                 * @throws {@link ImagingUnavailableError} when the context cannot be created.
+                     */
+                 export declare function getContext(surface: Surface, background?: string): SurfaceContext;
+
+                 /** The source could not be decoded into pixels. */
+                 export declare class ImageDecodeError extends ImagingError {
+                     constructor(message: string, options?: ErrorOptions);
+                 }
+
+                 /** The canvas could not produce encoded bytes. */
+                 export declare class ImageEncodeError extends ImagingError {
+                     constructor(message: string, options?: ErrorOptions);
+                 }
+
+                 /** What a file holds, without decoding all of it. */
+                 export declare interface ImageInfo {
+                     readonly width: number;
+                     readonly height: number;
+                     /** MIME type as reported by the blob. */
+                     readonly type: string;
+                     /** Size in bytes. */
+                     readonly bytes: number;
+                     /** `width / height`. */
+                     readonly aspectRatio: number;
+                 }
+
+                 /** Lifecycle of a processing call. */
+                 export declare type ImageProcessingStatus = "idle" | "working" | "done" | "error";
+
+                 /**
+                  * Types for browser-side image processing.
+                  */
+                 /**
+                  * Anything the module can decode.
+                  *
+                  * `HTMLVideoElement` reads the frame the element is **currently showing** —
+                  * `createImageBitmap` accepts it as a `CanvasImageSource`, so nothing here
+                  * special-cases it. Reading a chosen instant instead of the current one needs
+                  * the seek to be confirmed first, which is what `captureFrame` is for.
+                  */
+                 export declare type ImageSource = Blob | File | ImageBitmap | ImageData | HTMLImageElement | HTMLVideoElement | HTMLCanvasElement | OffscreenCanvas | string;
+
+                 /** Encodable image formats. */
+                 export declare type ImageType = "image/jpeg" | "image/png" | "image/webp" | "image/avif";
+
+                 /**
+                  * Errors thrown by the imaging module.
+                  *
+                  * `name` is a literal string on every subclass: minifiers rename classes,
+                  * and a derived `new.target.name` ships as `error.name === "t"`.
+                  */
+                 /** Base class for every error this module throws. */
+                 export declare class ImagingError extends Error {
+                     constructor(message: string, options?: ErrorOptions);
+                 }
+
+                 /** The environment has no canvas to draw on. */
+                 export declare class ImagingUnavailableError extends ImagingError {
+                     constructor(message: string, options?: ErrorOptions);
+                 }
+
+                 /** The result of an operation that produced an encoded image. */
+                 export declare interface ProcessedImage {
+                     /** The encoded bytes. */
+                     readonly blob: Blob;
+                     /** Output width. */
+                     readonly width: number;
+                     /** Output height. */
+                     readonly height: number;
+                     /** Output format actually produced — not necessarily the one asked for. */
+                     readonly type: string;
+                     /** Size in bytes. */
+                     readonly bytes: number;
+                 }
+
+                 /**
+                  * Read an image's dimensions, type and size.
+                  *
+                  * Decodes to measure, which is the only reliable way in a browser — there
+                  * is no header parser here, and guessing dimensions from a MIME type is not
+                  * a thing. Cheap enough for a preview, not for a thousand files in a loop.
+                  *
+                  * @example
+                  * ```ts
+                  * const info = await readImageInfo(file);
+                  * if (info.bytes > 5_000_000) {
+                  *     // ask before uploading
+                  * }
+                  * ```
+                  *
+                  * @param blob The image file.
+                  * @returns Its dimensions, MIME type, byte size and aspect ratio.
+                  * @throws {@link ImageDecodeError} when the blob is not a decodable image.
+                      */
+                  export declare function readImageInfo(blob: Blob): Promise<ImageInfo>;
+
+                  /**
+                   * How a resize fits the requested box.
+                   *
+                   * - `contain`: the whole image fits inside the box; the result may be
+                   *   smaller than the box in one dimension.
+                   * - `cover`: the box is filled; the overflow is cropped, centred.
+                   * - `fill`: the image is stretched to the box, changing its aspect ratio.
+                   * - `pad`: like `contain`, but the result is exactly the box, with the
+                   *   remainder painted in `background`.
+                   */
+                  export declare type ResizeFit = "contain" | "cover" | "fill" | "pad";
+
+                  /**
+                   * Resize an image, re-encoding it.
+                   *
+                   * @example
+                   * ```ts
+                   * const resized = await resizeImage(file, { width: 1600, type: "image/webp" });
+                   * console.log(resized.width, resized.bytes, resized.type);
+                   * ```
+                   *
+                   * @param source Anything decodable.
+                   * @param options Target box, fit, format and quality.
+                   * @returns The encoded result.
+                   * @throws {@link ImageDecodeError} when the source cannot be decoded.
+                       * @throws {@link ImageEncodeError} when the canvas produces no bytes.
+                           */
+                       export declare function resizeImage(source: ImageSource, options?: ResizeOptions): Promise<ProcessedImage>;
+
+                       /** Options for {@link resizeImage}. */
+                       export declare interface ResizeOptions extends EncodeOptions {
+                           /** Target width in pixels. */
+                           readonly width?: number;
+                           /** Target height in pixels. */
+                           readonly height?: number;
+                           /** How the image fits the box. Defaults to `contain`. */
+                           readonly fit?: ResizeFit;
+                           /** Fill colour for `pad`, and behind transparency when encoding JPEG. */
+                           readonly background?: string;
+                           /**
+                            * Never scale an image up.
+                            *
+                            * On by default: enlarging a photo adds no detail and multiplies the
+                            * bytes, which is the opposite of what a resize is usually for.
+                            */
+                           readonly withoutEnlargement?: boolean;
+                       }
+
+                       /**
+                        * Rotate an image by a multiple of 90 degrees.
+                        *
+                        * Restricted to right angles on purpose: an arbitrary angle needs a
+                        * decision about the corners (crop, pad, or grow the canvas) that belongs
+                        * to the caller's design, not to a utility default.
+                        *
+                        * @example
+                        * ```ts
+                        * const upright = await rotateImage(file, 90);
+                        * ```
+                        *
+                        * @param source Anything decodable.
+                        * @param degrees `90`, `180`, `270` — or any multiple, normalised.
+                        * @param options Format and quality.
+                        * @returns The rotated image.
+                        * @throws {@link ImageDecodeError} when the source cannot be decoded.
+                            * @throws {@link RangeError} when the angle is not a multiple of 90.
+                                */
+                            export declare function rotateImage(source: ImageSource, degrees: number, options?: EncodeOptions): Promise<ProcessedImage>;
+
+                            /**
+                             * Whether this browser can actually encode a format.
+                             *
+                             * Asks for a 1x1 image in that type and checks what came back, because
+                             * that is the only answer that counts: a browser that "supports" WebP for
+                             * display may still not encode it.
+                             *
+                             * @example
+                             * ```ts
+                             * const type = (await supportsImageType("image/webp")) ? "image/webp" : "image/jpeg";
+                             * const resized = await resizeImage(file, { width: 1200, type });
+                             * ```
+                             *
+                             * @param type The format to test.
+                             * @returns Whether encoding produces that type. Cached per type.
+                             */
+                            export declare function supportsImageType(type: ImageType): Promise<boolean>;
+
+                            /**
+                             * The drawing surface, and the one thing everyone gets wrong on it.
+                             *
+                             * **JPEG has no alpha.** Encoding a transparent PNG as JPEG paints the
+                             * transparent pixels black. Filling the surface first is the difference
+                             * between a photo on a white background and one with a black hole in it.
+                             *
+                             * What is *not* here is worth recording. The received wisdom for downscaling
+                             * on a canvas is to halve repeatedly, because a single `drawImage` into a
+                             * much smaller box was said to alias. That was implemented here, and then
+                             * measured: on a 512 px checkerboard reduced to 32 px, the stepwise result
+                             * and the single high-quality draw were **pixel-identical** (standard
+                             * deviation 0.0 on both) in Chromium and Firefox — while stepwise cost
+                             * **39.19 ms against 0.13 ms** on a 4000x3000 photo, 300 times more, and
+                             * allocated three intermediate canvases on a device that may not have the
+                             * memory. Modern engines honour `imageSmoothingQuality = "high"`, which is
+                             * what this module sets. The halving was deleted rather than kept "just in
+                             * case": unmeasurable benefit at 300x the cost is not insurance, it is
+                             * ballast.
+                             */
+                            /** A canvas this module can draw on, on the main thread or in a worker. */
+                            export declare type Surface = OffscreenCanvas | HTMLCanvasElement;
+
+                            /** A 2-D context from either surface kind. */
+                            export declare type SurfaceContext = OffscreenCanvasRenderingContext2D | CanvasRenderingContext2D;
+
+                            /** A produced thumbnail. */
+                            export declare interface Thumbnail extends ProcessedImage {
+                                readonly name: string;
+                            }
+
+                            /** One requested size. */
+                            export declare interface ThumbnailSpec {
+                                /** Name to find it by in the result. */
+                                readonly name: string;
+                                /** Longest edge in pixels. */
+                                readonly size: number;
+                                /** Format and quality, overriding the shared options. */
+                                readonly encode?: EncodeOptions;
+                            }
+
+                            /**
+                             * The browser cannot encode the requested format.
+                             *
+                             * Worth its own class because the failure is otherwise silent: asking a
+                             * canvas for an unsupported type does not throw — it hands back a PNG,
+                             * and an app that trusted the request ships 4 MB where it expected 300 KB.
+                             */
+                            export declare class UnsupportedImageTypeError extends ImagingError {
+                                constructor(message: string, options?: ErrorOptions);
+                            }
+
+                            /**
+                             * Hold an object URL for a blob, and revoke it when it is replaced.
+                             *
+                             * @example
+                             * ```tsx
+                             * function Preview({ file }: { file: File | null }) {
+                             *     const { url } = useImagePreview(file);
+                             *     return url === null ? null : <img src={url} alt="" />;
+                             * }
+                             * ```
+                             *
+                             * @param source The blob to preview, or `null`.
+                             * @returns The object URL, valid until the source changes or the component
+                             *   unmounts.
+                             */
+                            export declare function useImagePreview(source: Blob | null | undefined): UseImagePreviewResult;
+
+                            /** What {@link useImagePreview} returns. */
+                            export declare interface UseImagePreviewResult {
+                                /** Object URL for the current source, or `null`. */
+                                readonly url: string | null;
+                            }
+
+                            /**
+                             * Run image operations with status tracking, safe against unmount.
+                             *
+                             * @example
+                             * ```tsx
+                             * function Upload() {
+                             *     const { compress, isWorking, result } = useImageProcessing();
+                             *
+                             *     async function onPick(file: File) {
+                             *         const ready = await compress(file, { maxBytes: 1_000_000, width: 1600 });
+                             *         await fetch("/api/photos", { method: "POST", body: ready.blob });
+                             *     }
+                             *
+                             *     return <input type="file" disabled={isWorking} onChange={(e) => onPick(e.target.files![0]!)} />;
+                             * }
+                             * ```
+                             *
+                             * The returned promises still reject on failure, so a caller can `try`
+                             * around them; `status` and `error` exist for rendering, not for swallowing
+                             * the failure.
+                             *
+                             * @returns The operations plus their state.
+                             */
+                            export declare function useImageProcessing(): UseImageProcessingResult;
+
+                            /** What {@link useImageProcessing} returns. */
+                            export declare interface UseImageProcessingResult {
+                                /** Resize (and re-encode) an image. */
+                                readonly resize: (source: ImageSource, options?: ResizeOptions) => Promise<ProcessedImage>;
+                                /** Compress an image into a byte budget. */
+                                readonly compress: (source: ImageSource, options: CompressOptions) => Promise<CompressedImage>;
+                                /** The most recent result. */
+                                readonly result: ProcessedImage | null;
+                                /** Where the last call is. */
+                                readonly status: ImageProcessingStatus;
+                                /** Why the last call failed. */
+                                readonly error: Error | null;
+                                /** Whether a call is in flight. */
+                                readonly isWorking: boolean;
+                            }
+
+                            export { }