telnyx 6.64.0 → 6.65.0

package/src/resources/uac-connections/uac-connections.ts

@@ -75,7 +75,7 @@ export class UacConnections extends APIResource {
    * @example
    * ```ts
    * // Automatically fetches more pages as needed.
-   * for await (const uacConnection of client.uacConnections.list()) {
+   * for await (const uacConnectionListResponse of client.uacConnections.list()) {
    *   // ...
    * }
    * ```
@@ -83,8 +83,8 @@ export class UacConnections extends APIResource {
   list(
     query: UacConnectionListParams | null | undefined = {},
     options?: RequestOptions,
-  ): PagePromise<UacConnectionsDefaultFlatPagination, UacConnection> {
-    return this._client.getAPIList('/uac_connections', DefaultFlatPagination<UacConnection>, {
+  ): PagePromise<UacConnectionListResponsesDefaultFlatPagination, UacConnectionListResponse> {
+    return this._client.getAPIList('/uac_connections', DefaultFlatPagination<UacConnectionListResponse>, {
       query,
       ...options,
     });
@@ -105,7 +105,1337 @@ export class UacConnections extends APIResource {
   }
 }
 
-export type UacConnectionsDefaultFlatPagination = DefaultFlatPagination<UacConnection>;
+export type UacConnectionListResponsesDefaultFlatPagination =
+  DefaultFlatPagination<UacConnectionListResponse>;
+
+export interface UacConnectionCreateResponse {
+  /**
+   * A UAC (User Agent Client) Connection registers Telnyx to your PBX — the opposite
+   * of a standard SIP trunk, where the PBX registers to Telnyx. Use UAC when your
+   * PBX doesn’t support outbound SIP registration or you need Telnyx to maintain the
+   * registration.
+   */
+  data?: UacConnectionCreateResponse.Data;
+}
+
+export namespace UacConnectionCreateResponse {
+  /**
+   * A UAC (User Agent Client) Connection registers Telnyx to your PBX — the opposite
+   * of a standard SIP trunk, where the PBX registers to Telnyx. Use UAC when your
+   * PBX doesn’t support outbound SIP registration or you need Telnyx to maintain the
+   * registration.
+   */
+  export interface Data {
+    /**
+     * Identifies the type of resource.
+     */
+    id?: string;
+
+    /**
+     * Defaults to true
+     */
+    active?: boolean;
+
+    /**
+     * `Latency` directs Telnyx to route media through the site with the lowest
+     * round-trip time to the user's connection. Telnyx calculates this time using ICMP
+     * ping messages. This can be disabled by specifying a site to handle all media.
+     */
+    anchorsite_override?: CredentialConnectionsAPI.AnchorsiteOverride;
+
+    /**
+     * The uuid of the push credential for Android
+     */
+    android_push_credential_id?: string | null;
+
+    /**
+     * The authentication strategy used by this connection.
+     */
+    authentication?: 'uac-authentication';
+
+    /**
+     * Specifies if call cost webhooks should be sent for this connection.
+     */
+    call_cost_in_webhooks?: boolean;
+
+    connection_name?: string;
+
+    /**
+     * ISO-8601 formatted date indicating when the resource was created.
+     */
+    created_at?: string;
+
+    /**
+     * When enabled, Telnyx will generate comfort noise when you place the call on
+     * hold. If disabled, you will need to generate comfort noise or on hold music to
+     * avoid RTP timeout.
+     */
+    default_on_hold_comfort_noise_enabled?: boolean;
+
+    /**
+     * Sets the type of DTMF digits sent from Telnyx to this Connection. Note that DTMF
+     * digits sent to Telnyx will be accepted in all formats.
+     */
+    dtmf_type?: CredentialConnectionsAPI.DtmfType;
+
+    /**
+     * Encode the SIP contact header sent by Telnyx to avoid issues for NAT or ALG
+     * scenarios.
+     */
+    encode_contact_header_enabled?: boolean;
+
+    /**
+     * Enable use of SRTP for encryption. Cannot be set if the transport_portocol is
+     * TLS.
+     */
+    encrypted_media?: CredentialConnectionsAPI.EncryptedMedia | null;
+
+    /**
+     * External SIP peer settings used by Telnyx when registering to your PBX and
+     * routing outbound calls.
+     */
+    external_uac_settings?: Data.ExternalUacSettings;
+
+    /**
+     * The Telnyx-managed FQDN generated for the UAC connection.
+     */
+    fqdn?: string;
+
+    /**
+     * The fixed outbound authentication mode used by UAC FQDN records.
+     */
+    fqdn_outbound_authentication?: 'credential-authentication';
+
+    /**
+     * FQDN records managed automatically by the UAC connection lifecycle.
+     */
+    fqdns?: Array<FqdnsAPI.Fqdn>;
+
+    inbound?: Data.Inbound;
+
+    /**
+     * Internal Telnyx-side settings for a UAC connection.
+     */
+    internal_uac_settings?: Data.InternalUacSettings;
+
+    /**
+     * The uuid of the push credential for Ios
+     */
+    ios_push_credential_id?: string | null;
+
+    /**
+     * Configuration options for Jitter Buffer. Enables Jitter Buffer for RTP streams
+     * of SIP Trunking calls. The feature is off unless enabled. You may define min and
+     * max values in msec for customized buffering behaviors. Larger values add latency
+     * but tolerate more jitter, while smaller values reduce latency but are more
+     * sensitive to jitter and reordering.
+     */
+    jitter_buffer?: Shared.ConnectionJitterBuffer;
+
+    /**
+     * Controls when noise suppression is applied to calls. When set to 'inbound',
+     * noise suppression is applied to incoming audio. When set to 'outbound', it's
+     * applied to outgoing audio. When set to 'both', it's applied in both directions.
+     * When set to 'disabled', noise suppression is turned off.
+     */
+    noise_suppression?: 'inbound' | 'outbound' | 'both' | 'disabled';
+
+    /**
+     * Configuration options for noise suppression. These settings are stored
+     * regardless of the noise_suppression value, but only take effect when
+     * noise_suppression is not 'disabled'. If you disable noise suppression and later
+     * re-enable it, the previously configured settings will be used.
+     */
+    noise_suppression_details?: Shared.ConnectionNoiseSuppressionDetails;
+
+    /**
+     * Enable on-net T38 if you prefer the sender and receiver negotiating T38 directly
+     * if both are on the Telnyx network. If this is disabled, Telnyx will be able to
+     * use T38 on just one leg of the call depending on each leg's settings.
+     */
+    onnet_t38_passthrough_enabled?: boolean;
+
+    outbound?: Data.Outbound;
+
+    /**
+     * The password to be used as part of the credentials. Must be 8 to 128 characters
+     * long.
+     */
+    password?: string;
+
+    /**
+     * Identifies the type of the resource.
+     */
+    record_type?: string;
+
+    /**
+     * The most recently known SIP registration status for this UAC connection.
+     */
+    registration_status?: string | null;
+
+    /**
+     * ISO 8601 formatted date indicating when the registration status was last
+     * updated.
+     */
+    registration_status_updated_at?: string | null;
+
+    rtcp_settings?: CredentialConnectionsAPI.ConnectionRtcpSettings;
+
+    /**
+     * This feature enables inbound SIP URI calls to your Credential Auth Connection.
+     * If enabled for all (unrestricted) then anyone who calls the SIP URI
+     * <your-username>@telnyx.com will be connected to your Connection. You can also
+     * choose to allow only calls that are originated on any Connections under your
+     * account (internal).
+     */
+    sip_uri_calling_preference?: 'disabled' | 'unrestricted' | 'internal';
+
+    /**
+     * Tags associated with the connection.
+     */
+    tags?: Array<string>;
+
+    /**
+     * ISO-8601 formatted date indicating when the resource was updated.
+     */
+    updated_at?: string;
+
+    /**
+     * The user name to be used as part of the credentials. Must be 4-32 characters
+     * long and alphanumeric values only (no spaces or special characters). At least
+     * one of the first 5 characters must be a letter.
+     */
+    user_name?: string;
+
+    /**
+     * Determines which webhook format will be used, Telnyx API v1 or v2.
+     */
+    webhook_api_version?: '1' | '2';
+
+    /**
+     * The failover URL where webhooks related to this connection will be sent if
+     * sending to the primary URL fails. Must include a scheme, such as 'https'.
+     */
+    webhook_event_failover_url?: string | null;
+
+    /**
+     * The URL where webhooks related to this connection will be sent. Must include a
+     * scheme, such as 'https'.
+     */
+    webhook_event_url?: string;
+
+    /**
+     * Specifies how many seconds to wait before timing out a webhook.
+     */
+    webhook_timeout_secs?: number | null;
+  }
+
+  export namespace Data {
+    /**
+     * External SIP peer settings used by Telnyx when registering to your PBX and
+     * routing outbound calls.
+     */
+    export interface ExternalUacSettings {
+      /**
+       * The authentication username used in SIP digest authentication. If not set, the
+       * Username value will be used.
+       */
+      auth_username?: string | null;
+
+      /**
+       * The registration interval, in seconds, indicating how often the system refreshes
+       * the SIP registration with the external SIP peer.
+       */
+      expiration_sec?: number | null;
+
+      /**
+       * The user portion of the SIP From header used in outbound requests. This controls
+       * the caller identity presented to the external SIP peer.
+       */
+      from_user?: string | null;
+
+      /**
+       * An optional SIP proxy used to route outbound requests before reaching the
+       * external SIP peer.
+       */
+      outbound_proxy?: string | null;
+
+      /**
+       * The SIP password used for digest authentication with the external SIP peer.
+       */
+      password?: string;
+
+      /**
+       * The SIP proxy address of the external SIP peer used for registrations and
+       * outbound call routing.
+       */
+      proxy?: string;
+
+      /**
+       * The transport protocol used for SIP signaling when communicating with the
+       * external SIP peer. One of UDP, TLS, or TCP.
+       */
+      transport?: 'UDP' | 'TLS' | 'TCP' | null;
+
+      /**
+       * The SIP username used to authenticate with the external SIP peer for
+       * registrations and outbound calls. Must start with a letter or number and contain
+       * only letters, numbers, hyphens, and underscores.
+       */
+      username?: string;
+    }
+
+    export interface Inbound {
+      /**
+       * This setting allows you to set the format with which the caller's number (ANI)
+       * is sent for inbound phone calls.
+       */
+      ani_number_format?: '+E.164' | 'E.164' | '+E.164-national' | 'E.164-national';
+
+      /**
+       * When set, this will limit the total number of inbound calls to phone numbers
+       * associated with this connection.
+       */
+      channel_limit?: number;
+
+      /**
+       * Defines the list of codecs that Telnyx will send for inbound calls to a specific
+       * number on your portal account, in priority order. This only works when the
+       * Connection the number is assigned to uses Media Handling mode: default. OPUS and
+       * H.264 codecs are available only when using TCP or TLS transport for SIP.
+       */
+      codecs?: Array<string>;
+
+      /**
+       * Default routing method to be used when a number is associated with the
+       * connection. Must be one of the routing method types or left blank, other values
+       * are not allowed.
+       */
+      default_routing_method?: 'sequential' | 'round-robin';
+
+      dnis_number_format?: '+e164' | 'e164' | 'national' | 'sip_username';
+
+      /**
+       * Generate ringback tone through 183 session progress message with early media.
+       */
+      generate_ringback_tone?: boolean;
+
+      /**
+       * When set, inbound phone calls will receive ISUP parameters via SIP headers.
+       * (Only when available and only when using TCP or TLS transport.)
+       */
+      isup_headers_enabled?: boolean;
+
+      /**
+       * Enable PRACK messages as defined in RFC3262.
+       */
+      prack_enabled?: boolean;
+
+      /**
+       * When enabled the SIP Connection will receive the Identity header with
+       * Shaken/Stir data in the SIP INVITE message of inbound calls, even when using UDP
+       * transport.
+       */
+      shaken_stir_enabled?: boolean;
+
+      /**
+       * When enabled, allows multiple devices to ring simultaneously on incoming calls.
+       */
+      simultaneous_ringing?: 'disabled' | 'enabled';
+
+      /**
+       * Defaults to true.
+       */
+      sip_compact_headers_enabled?: boolean;
+
+      /**
+       * The Telnyx-generated SIP subdomain for this UAC connection.
+       */
+      sip_subdomain?: string;
+
+      /**
+       * Controls which SIP URI callers may reach this connection.
+       */
+      sip_subdomain_receive_settings?: 'only_my_connections' | 'from_anyone';
+
+      /**
+       * Time(sec) before aborting if connection is not made.
+       */
+      timeout_1xx_secs?: number;
+
+      /**
+       * Time(sec) before aborting if call is unanswered (min: 1, max: 600).
+       */
+      timeout_2xx_secs?: number;
+    }
+
+    /**
+     * Internal Telnyx-side settings for a UAC connection.
+     */
+    export interface InternalUacSettings {
+      /**
+       * The SIP URI that Telnyx will call when handling an inbound request from the
+       * external peer. Do not include a `sip:` prefix. The value must be in the format
+       * `userinfo@<subdomain.>sip.telnyx.com` or
+       * `userinfo@<subdomain.>sipdev.telnyx.com`; the userinfo portion may contain only
+       * letters, digits, hyphens, and underscores.
+       */
+      destination_uri?: string;
+    }
+
+    export interface Outbound {
+      /**
+       * Set a phone number as the ani_override value to override caller id number on
+       * outbound calls.
+       */
+      ani_override?: string;
+
+      /**
+       * Specifies when we apply your ani_override setting. Only applies when
+       * ani_override is not blank.
+       */
+      ani_override_type?: 'always' | 'normal' | 'emergency';
+
+      /**
+       * Forces all SIP calls originated on this connection to be "parked" instead of
+       * "bridged" to the destination specified on the URI. Parked calls will return
+       * ringback to the caller and will await for a Call Control command to define which
+       * action will be taken next.
+       */
+      call_parking_enabled?: boolean | null;
+
+      /**
+       * When set, this will limit the total number of outbound calls to phone numbers
+       * associated with this connection.
+       */
+      channel_limit?: number;
+
+      /**
+       * Generate ringback tone through 183 session progress message with early media.
+       */
+      generate_ringback_tone?: boolean;
+
+      /**
+       * When set, ringback will not wait for indication before sending ringback tone to
+       * calling party.
+       */
+      instant_ringback_enabled?: boolean;
+
+      /**
+       * A 2-character country code specifying the country whose national dialing rules
+       * should be used. For example, if set to `US` then any US number can be dialed
+       * without preprending +1 to the number. When left blank, Telnyx will try US and GB
+       * dialing rules, in that order, by default.
+       */
+      localization?: string;
+
+      /**
+       * Identifies the associated outbound voice profile.
+       */
+      outbound_voice_profile_id?: string;
+
+      /**
+       * This setting only affects connections with Fax-type Outbound Voice Profiles. The
+       * setting dictates whether or not Telnyx sends a t.38 reinvite.<br/><br/> By
+       * default, Telnyx will send the re-invite. If set to `customer`, the caller is
+       * expected to send the t.38 reinvite.
+       */
+      t38_reinvite_source?:
+        | 'telnyx'
+        | 'customer'
+        | 'disabled'
+        | 'passthru'
+        | 'caller-passthru'
+        | 'callee-passthru';
+    }
+  }
+}
+
+export interface UacConnectionRetrieveResponse {
+  /**
+   * A UAC (User Agent Client) Connection registers Telnyx to your PBX — the opposite
+   * of a standard SIP trunk, where the PBX registers to Telnyx. Use UAC when your
+   * PBX doesn’t support outbound SIP registration or you need Telnyx to maintain the
+   * registration.
+   */
+  data?: UacConnectionRetrieveResponse.Data;
+}
+
+export namespace UacConnectionRetrieveResponse {
+  /**
+   * A UAC (User Agent Client) Connection registers Telnyx to your PBX — the opposite
+   * of a standard SIP trunk, where the PBX registers to Telnyx. Use UAC when your
+   * PBX doesn’t support outbound SIP registration or you need Telnyx to maintain the
+   * registration.
+   */
+  export interface Data {
+    /**
+     * Identifies the type of resource.
+     */
+    id?: string;
+
+    /**
+     * Defaults to true
+     */
+    active?: boolean;
+
+    /**
+     * `Latency` directs Telnyx to route media through the site with the lowest
+     * round-trip time to the user's connection. Telnyx calculates this time using ICMP
+     * ping messages. This can be disabled by specifying a site to handle all media.
+     */
+    anchorsite_override?: CredentialConnectionsAPI.AnchorsiteOverride;
+
+    /**
+     * The uuid of the push credential for Android
+     */
+    android_push_credential_id?: string | null;
+
+    /**
+     * The authentication strategy used by this connection.
+     */
+    authentication?: 'uac-authentication';
+
+    /**
+     * Specifies if call cost webhooks should be sent for this connection.
+     */
+    call_cost_in_webhooks?: boolean;
+
+    connection_name?: string;
+
+    /**
+     * ISO-8601 formatted date indicating when the resource was created.
+     */
+    created_at?: string;
+
+    /**
+     * When enabled, Telnyx will generate comfort noise when you place the call on
+     * hold. If disabled, you will need to generate comfort noise or on hold music to
+     * avoid RTP timeout.
+     */
+    default_on_hold_comfort_noise_enabled?: boolean;
+
+    /**
+     * Sets the type of DTMF digits sent from Telnyx to this Connection. Note that DTMF
+     * digits sent to Telnyx will be accepted in all formats.
+     */
+    dtmf_type?: CredentialConnectionsAPI.DtmfType;
+
+    /**
+     * Encode the SIP contact header sent by Telnyx to avoid issues for NAT or ALG
+     * scenarios.
+     */
+    encode_contact_header_enabled?: boolean;
+
+    /**
+     * Enable use of SRTP for encryption. Cannot be set if the transport_portocol is
+     * TLS.
+     */
+    encrypted_media?: CredentialConnectionsAPI.EncryptedMedia | null;
+
+    /**
+     * External SIP peer settings used by Telnyx when registering to your PBX and
+     * routing outbound calls.
+     */
+    external_uac_settings?: Data.ExternalUacSettings;
+
+    /**
+     * The Telnyx-managed FQDN generated for the UAC connection.
+     */
+    fqdn?: string;
+
+    /**
+     * The fixed outbound authentication mode used by UAC FQDN records.
+     */
+    fqdn_outbound_authentication?: 'credential-authentication';
+
+    /**
+     * FQDN records managed automatically by the UAC connection lifecycle.
+     */
+    fqdns?: Array<FqdnsAPI.Fqdn>;
+
+    inbound?: Data.Inbound;
+
+    /**
+     * Internal Telnyx-side settings for a UAC connection.
+     */
+    internal_uac_settings?: Data.InternalUacSettings;
+
+    /**
+     * The uuid of the push credential for Ios
+     */
+    ios_push_credential_id?: string | null;
+
+    /**
+     * Configuration options for Jitter Buffer. Enables Jitter Buffer for RTP streams
+     * of SIP Trunking calls. The feature is off unless enabled. You may define min and
+     * max values in msec for customized buffering behaviors. Larger values add latency
+     * but tolerate more jitter, while smaller values reduce latency but are more
+     * sensitive to jitter and reordering.
+     */
+    jitter_buffer?: Shared.ConnectionJitterBuffer;
+
+    /**
+     * Controls when noise suppression is applied to calls. When set to 'inbound',
+     * noise suppression is applied to incoming audio. When set to 'outbound', it's
+     * applied to outgoing audio. When set to 'both', it's applied in both directions.
+     * When set to 'disabled', noise suppression is turned off.
+     */
+    noise_suppression?: 'inbound' | 'outbound' | 'both' | 'disabled';
+
+    /**
+     * Configuration options for noise suppression. These settings are stored
+     * regardless of the noise_suppression value, but only take effect when
+     * noise_suppression is not 'disabled'. If you disable noise suppression and later
+     * re-enable it, the previously configured settings will be used.
+     */
+    noise_suppression_details?: Shared.ConnectionNoiseSuppressionDetails;
+
+    /**
+     * Enable on-net T38 if you prefer the sender and receiver negotiating T38 directly
+     * if both are on the Telnyx network. If this is disabled, Telnyx will be able to
+     * use T38 on just one leg of the call depending on each leg's settings.
+     */
+    onnet_t38_passthrough_enabled?: boolean;
+
+    outbound?: Data.Outbound;
+
+    /**
+     * The password to be used as part of the credentials. Must be 8 to 128 characters
+     * long.
+     */
+    password?: string;
+
+    /**
+     * Identifies the type of the resource.
+     */
+    record_type?: string;
+
+    /**
+     * The most recently known SIP registration status for this UAC connection.
+     */
+    registration_status?: string | null;
+
+    /**
+     * ISO 8601 formatted date indicating when the registration status was last
+     * updated.
+     */
+    registration_status_updated_at?: string | null;
+
+    rtcp_settings?: CredentialConnectionsAPI.ConnectionRtcpSettings;
+
+    /**
+     * This feature enables inbound SIP URI calls to your Credential Auth Connection.
+     * If enabled for all (unrestricted) then anyone who calls the SIP URI
+     * <your-username>@telnyx.com will be connected to your Connection. You can also
+     * choose to allow only calls that are originated on any Connections under your
+     * account (internal).
+     */
+    sip_uri_calling_preference?: 'disabled' | 'unrestricted' | 'internal';
+
+    /**
+     * Tags associated with the connection.
+     */
+    tags?: Array<string>;
+
+    /**
+     * ISO-8601 formatted date indicating when the resource was updated.
+     */
+    updated_at?: string;
+
+    /**
+     * The user name to be used as part of the credentials. Must be 4-32 characters
+     * long and alphanumeric values only (no spaces or special characters). At least
+     * one of the first 5 characters must be a letter.
+     */
+    user_name?: string;
+
+    /**
+     * Determines which webhook format will be used, Telnyx API v1 or v2.
+     */
+    webhook_api_version?: '1' | '2';
+
+    /**
+     * The failover URL where webhooks related to this connection will be sent if
+     * sending to the primary URL fails. Must include a scheme, such as 'https'.
+     */
+    webhook_event_failover_url?: string | null;
+
+    /**
+     * The URL where webhooks related to this connection will be sent. Must include a
+     * scheme, such as 'https'.
+     */
+    webhook_event_url?: string;
+
+    /**
+     * Specifies how many seconds to wait before timing out a webhook.
+     */
+    webhook_timeout_secs?: number | null;
+  }
+
+  export namespace Data {
+    /**
+     * External SIP peer settings used by Telnyx when registering to your PBX and
+     * routing outbound calls.
+     */
+    export interface ExternalUacSettings {
+      /**
+       * The authentication username used in SIP digest authentication. If not set, the
+       * Username value will be used.
+       */
+      auth_username?: string | null;
+
+      /**
+       * The registration interval, in seconds, indicating how often the system refreshes
+       * the SIP registration with the external SIP peer.
+       */
+      expiration_sec?: number | null;
+
+      /**
+       * The user portion of the SIP From header used in outbound requests. This controls
+       * the caller identity presented to the external SIP peer.
+       */
+      from_user?: string | null;
+
+      /**
+       * An optional SIP proxy used to route outbound requests before reaching the
+       * external SIP peer.
+       */
+      outbound_proxy?: string | null;
+
+      /**
+       * The SIP password used for digest authentication with the external SIP peer.
+       */
+      password?: string;
+
+      /**
+       * The SIP proxy address of the external SIP peer used for registrations and
+       * outbound call routing.
+       */
+      proxy?: string;
+
+      /**
+       * The transport protocol used for SIP signaling when communicating with the
+       * external SIP peer. One of UDP, TLS, or TCP.
+       */
+      transport?: 'UDP' | 'TLS' | 'TCP' | null;
+
+      /**
+       * The SIP username used to authenticate with the external SIP peer for
+       * registrations and outbound calls. Must start with a letter or number and contain
+       * only letters, numbers, hyphens, and underscores.
+       */
+      username?: string;
+    }
+
+    export interface Inbound {
+      /**
+       * This setting allows you to set the format with which the caller's number (ANI)
+       * is sent for inbound phone calls.
+       */
+      ani_number_format?: '+E.164' | 'E.164' | '+E.164-national' | 'E.164-national';
+
+      /**
+       * When set, this will limit the total number of inbound calls to phone numbers
+       * associated with this connection.
+       */
+      channel_limit?: number;
+
+      /**
+       * Defines the list of codecs that Telnyx will send for inbound calls to a specific
+       * number on your portal account, in priority order. This only works when the
+       * Connection the number is assigned to uses Media Handling mode: default. OPUS and
+       * H.264 codecs are available only when using TCP or TLS transport for SIP.
+       */
+      codecs?: Array<string>;
+
+      /**
+       * Default routing method to be used when a number is associated with the
+       * connection. Must be one of the routing method types or left blank, other values
+       * are not allowed.
+       */
+      default_routing_method?: 'sequential' | 'round-robin';
+
+      dnis_number_format?: '+e164' | 'e164' | 'national' | 'sip_username';
+
+      /**
+       * Generate ringback tone through 183 session progress message with early media.
+       */
+      generate_ringback_tone?: boolean;
+
+      /**
+       * When set, inbound phone calls will receive ISUP parameters via SIP headers.
+       * (Only when available and only when using TCP or TLS transport.)
+       */
+      isup_headers_enabled?: boolean;
+
+      /**
+       * Enable PRACK messages as defined in RFC3262.
+       */
+      prack_enabled?: boolean;
+
+      /**
+       * When enabled the SIP Connection will receive the Identity header with
+       * Shaken/Stir data in the SIP INVITE message of inbound calls, even when using UDP
+       * transport.
+       */
+      shaken_stir_enabled?: boolean;
+
+      /**
+       * When enabled, allows multiple devices to ring simultaneously on incoming calls.
+       */
+      simultaneous_ringing?: 'disabled' | 'enabled';
+
+      /**
+       * Defaults to true.
+       */
+      sip_compact_headers_enabled?: boolean;
+
+      /**
+       * The Telnyx-generated SIP subdomain for this UAC connection.
+       */
+      sip_subdomain?: string;
+
+      /**
+       * Controls which SIP URI callers may reach this connection.
+       */
+      sip_subdomain_receive_settings?: 'only_my_connections' | 'from_anyone';
+
+      /**
+       * Time(sec) before aborting if connection is not made.
+       */
+      timeout_1xx_secs?: number;
+
+      /**
+       * Time(sec) before aborting if call is unanswered (min: 1, max: 600).
+       */
+      timeout_2xx_secs?: number;
+    }
+
+    /**
+     * Internal Telnyx-side settings for a UAC connection.
+     */
+    export interface InternalUacSettings {
+      /**
+       * The SIP URI that Telnyx will call when handling an inbound request from the
+       * external peer. Do not include a `sip:` prefix. The value must be in the format
+       * `userinfo@<subdomain.>sip.telnyx.com` or
+       * `userinfo@<subdomain.>sipdev.telnyx.com`; the userinfo portion may contain only
+       * letters, digits, hyphens, and underscores.
+       */
+      destination_uri?: string;
+    }
+
+    export interface Outbound {
+      /**
+       * Set a phone number as the ani_override value to override caller id number on
+       * outbound calls.
+       */
+      ani_override?: string;
+
+      /**
+       * Specifies when we apply your ani_override setting. Only applies when
+       * ani_override is not blank.
+       */
+      ani_override_type?: 'always' | 'normal' | 'emergency';
+
+      /**
+       * Forces all SIP calls originated on this connection to be "parked" instead of
+       * "bridged" to the destination specified on the URI. Parked calls will return
+       * ringback to the caller and will await for a Call Control command to define which
+       * action will be taken next.
+       */
+      call_parking_enabled?: boolean | null;
+
+      /**
+       * When set, this will limit the total number of outbound calls to phone numbers
+       * associated with this connection.
+       */
+      channel_limit?: number;
+
+      /**
+       * Generate ringback tone through 183 session progress message with early media.
+       */
+      generate_ringback_tone?: boolean;
+
+      /**
+       * When set, ringback will not wait for indication before sending ringback tone to
+       * calling party.
+       */
+      instant_ringback_enabled?: boolean;
+
+      /**
+       * A 2-character country code specifying the country whose national dialing rules
+       * should be used. For example, if set to `US` then any US number can be dialed
+       * without preprending +1 to the number. When left blank, Telnyx will try US and GB
+       * dialing rules, in that order, by default.
+       */
+      localization?: string;
+
+      /**
+       * Identifies the associated outbound voice profile.
+       */
+      outbound_voice_profile_id?: string;
+
+      /**
+       * This setting only affects connections with Fax-type Outbound Voice Profiles. The
+       * setting dictates whether or not Telnyx sends a t.38 reinvite.<br/><br/> By
+       * default, Telnyx will send the re-invite. If set to `customer`, the caller is
+       * expected to send the t.38 reinvite.
+       */
+      t38_reinvite_source?:
+        | 'telnyx'
+        | 'customer'
+        | 'disabled'
+        | 'passthru'
+        | 'caller-passthru'
+        | 'callee-passthru';
+    }
+  }
+}
+
+export interface UacConnectionUpdateResponse {
+  /**
+   * A UAC (User Agent Client) Connection registers Telnyx to your PBX — the opposite
+   * of a standard SIP trunk, where the PBX registers to Telnyx. Use UAC when your
+   * PBX doesn’t support outbound SIP registration or you need Telnyx to maintain the
+   * registration.
+   */
+  data?: UacConnectionUpdateResponse.Data;
+}
+
+export namespace UacConnectionUpdateResponse {
+  /**
+   * A UAC (User Agent Client) Connection registers Telnyx to your PBX — the opposite
+   * of a standard SIP trunk, where the PBX registers to Telnyx. Use UAC when your
+   * PBX doesn’t support outbound SIP registration or you need Telnyx to maintain the
+   * registration.
+   */
+  export interface Data {
+    /**
+     * Identifies the type of resource.
+     */
+    id?: string;
+
+    /**
+     * Defaults to true
+     */
+    active?: boolean;
+
+    /**
+     * `Latency` directs Telnyx to route media through the site with the lowest
+     * round-trip time to the user's connection. Telnyx calculates this time using ICMP
+     * ping messages. This can be disabled by specifying a site to handle all media.
+     */
+    anchorsite_override?: CredentialConnectionsAPI.AnchorsiteOverride;
+
+    /**
+     * The uuid of the push credential for Android
+     */
+    android_push_credential_id?: string | null;
+
+    /**
+     * The authentication strategy used by this connection.
+     */
+    authentication?: 'uac-authentication';
+
+    /**
+     * Specifies if call cost webhooks should be sent for this connection.
+     */
+    call_cost_in_webhooks?: boolean;
+
+    connection_name?: string;
+
+    /**
+     * ISO-8601 formatted date indicating when the resource was created.
+     */
+    created_at?: string;
+
+    /**
+     * When enabled, Telnyx will generate comfort noise when you place the call on
+     * hold. If disabled, you will need to generate comfort noise or on hold music to
+     * avoid RTP timeout.
+     */
+    default_on_hold_comfort_noise_enabled?: boolean;
+
+    /**
+     * Sets the type of DTMF digits sent from Telnyx to this Connection. Note that DTMF
+     * digits sent to Telnyx will be accepted in all formats.
+     */
+    dtmf_type?: CredentialConnectionsAPI.DtmfType;
+
+    /**
+     * Encode the SIP contact header sent by Telnyx to avoid issues for NAT or ALG
+     * scenarios.
+     */
+    encode_contact_header_enabled?: boolean;
+
+    /**
+     * Enable use of SRTP for encryption. Cannot be set if the transport_portocol is
+     * TLS.
+     */
+    encrypted_media?: CredentialConnectionsAPI.EncryptedMedia | null;
+
+    /**
+     * External SIP peer settings used by Telnyx when registering to your PBX and
+     * routing outbound calls.
+     */
+    external_uac_settings?: Data.ExternalUacSettings;
+
+    /**
+     * The Telnyx-managed FQDN generated for the UAC connection.
+     */
+    fqdn?: string;
+
+    /**
+     * The fixed outbound authentication mode used by UAC FQDN records.
+     */
+    fqdn_outbound_authentication?: 'credential-authentication';
+
+    /**
+     * FQDN records managed automatically by the UAC connection lifecycle.
+     */
+    fqdns?: Array<FqdnsAPI.Fqdn>;
+
+    inbound?: Data.Inbound;
+
+    /**
+     * Internal Telnyx-side settings for a UAC connection.
+     */
+    internal_uac_settings?: Data.InternalUacSettings;
+
+    /**
+     * The uuid of the push credential for Ios
+     */
+    ios_push_credential_id?: string | null;
+
+    /**
+     * Configuration options for Jitter Buffer. Enables Jitter Buffer for RTP streams
+     * of SIP Trunking calls. The feature is off unless enabled. You may define min and
+     * max values in msec for customized buffering behaviors. Larger values add latency
+     * but tolerate more jitter, while smaller values reduce latency but are more
+     * sensitive to jitter and reordering.
+     */
+    jitter_buffer?: Shared.ConnectionJitterBuffer;
+
+    /**
+     * Controls when noise suppression is applied to calls. When set to 'inbound',
+     * noise suppression is applied to incoming audio. When set to 'outbound', it's
+     * applied to outgoing audio. When set to 'both', it's applied in both directions.
+     * When set to 'disabled', noise suppression is turned off.
+     */
+    noise_suppression?: 'inbound' | 'outbound' | 'both' | 'disabled';
+
+    /**
+     * Configuration options for noise suppression. These settings are stored
+     * regardless of the noise_suppression value, but only take effect when
+     * noise_suppression is not 'disabled'. If you disable noise suppression and later
+     * re-enable it, the previously configured settings will be used.
+     */
+    noise_suppression_details?: Shared.ConnectionNoiseSuppressionDetails;
+
+    /**
+     * Enable on-net T38 if you prefer the sender and receiver negotiating T38 directly
+     * if both are on the Telnyx network. If this is disabled, Telnyx will be able to
+     * use T38 on just one leg of the call depending on each leg's settings.
+     */
+    onnet_t38_passthrough_enabled?: boolean;
+
+    outbound?: Data.Outbound;
+
+    /**
+     * The password to be used as part of the credentials. Must be 8 to 128 characters
+     * long.
+     */
+    password?: string;
+
+    /**
+     * Identifies the type of the resource.
+     */
+    record_type?: string;
+
+    /**
+     * The most recently known SIP registration status for this UAC connection.
+     */
+    registration_status?: string | null;
+
+    /**
+     * ISO 8601 formatted date indicating when the registration status was last
+     * updated.
+     */
+    registration_status_updated_at?: string | null;
+
+    rtcp_settings?: CredentialConnectionsAPI.ConnectionRtcpSettings;
+
+    /**
+     * This feature enables inbound SIP URI calls to your Credential Auth Connection.
+     * If enabled for all (unrestricted) then anyone who calls the SIP URI
+     * <your-username>@telnyx.com will be connected to your Connection. You can also
+     * choose to allow only calls that are originated on any Connections under your
+     * account (internal).
+     */
+    sip_uri_calling_preference?: 'disabled' | 'unrestricted' | 'internal';
+
+    /**
+     * Tags associated with the connection.
+     */
+    tags?: Array<string>;
+
+    /**
+     * ISO-8601 formatted date indicating when the resource was updated.
+     */
+    updated_at?: string;
+
+    /**
+     * The user name to be used as part of the credentials. Must be 4-32 characters
+     * long and alphanumeric values only (no spaces or special characters). At least
+     * one of the first 5 characters must be a letter.
+     */
+    user_name?: string;
+
+    /**
+     * Determines which webhook format will be used, Telnyx API v1 or v2.
+     */
+    webhook_api_version?: '1' | '2';
+
+    /**
+     * The failover URL where webhooks related to this connection will be sent if
+     * sending to the primary URL fails. Must include a scheme, such as 'https'.
+     */
+    webhook_event_failover_url?: string | null;
+
+    /**
+     * The URL where webhooks related to this connection will be sent. Must include a
+     * scheme, such as 'https'.
+     */
+    webhook_event_url?: string;
+
+    /**
+     * Specifies how many seconds to wait before timing out a webhook.
+     */
+    webhook_timeout_secs?: number | null;
+  }
+
+  export namespace Data {
+    /**
+     * External SIP peer settings used by Telnyx when registering to your PBX and
+     * routing outbound calls.
+     */
+    export interface ExternalUacSettings {
+      /**
+       * The authentication username used in SIP digest authentication. If not set, the
+       * Username value will be used.
+       */
+      auth_username?: string | null;
+
+      /**
+       * The registration interval, in seconds, indicating how often the system refreshes
+       * the SIP registration with the external SIP peer.
+       */
+      expiration_sec?: number | null;
+
+      /**
+       * The user portion of the SIP From header used in outbound requests. This controls
+       * the caller identity presented to the external SIP peer.
+       */
+      from_user?: string | null;
+
+      /**
+       * An optional SIP proxy used to route outbound requests before reaching the
+       * external SIP peer.
+       */
+      outbound_proxy?: string | null;
+
+      /**
+       * The SIP password used for digest authentication with the external SIP peer.
+       */
+      password?: string;
+
+      /**
+       * The SIP proxy address of the external SIP peer used for registrations and
+       * outbound call routing.
+       */
+      proxy?: string;
+
+      /**
+       * The transport protocol used for SIP signaling when communicating with the
+       * external SIP peer. One of UDP, TLS, or TCP.
+       */
+      transport?: 'UDP' | 'TLS' | 'TCP' | null;
+
+      /**
+       * The SIP username used to authenticate with the external SIP peer for
+       * registrations and outbound calls. Must start with a letter or number and contain
+       * only letters, numbers, hyphens, and underscores.
+       */
+      username?: string;
+    }
+
+    export interface Inbound {
+      /**
+       * This setting allows you to set the format with which the caller's number (ANI)
+       * is sent for inbound phone calls.
+       */
+      ani_number_format?: '+E.164' | 'E.164' | '+E.164-national' | 'E.164-national';
+
+      /**
+       * When set, this will limit the total number of inbound calls to phone numbers
+       * associated with this connection.
+       */
+      channel_limit?: number;
+
+      /**
+       * Defines the list of codecs that Telnyx will send for inbound calls to a specific
+       * number on your portal account, in priority order. This only works when the
+       * Connection the number is assigned to uses Media Handling mode: default. OPUS and
+       * H.264 codecs are available only when using TCP or TLS transport for SIP.
+       */
+      codecs?: Array<string>;
+
+      /**
+       * Default routing method to be used when a number is associated with the
+       * connection. Must be one of the routing method types or left blank, other values
+       * are not allowed.
+       */
+      default_routing_method?: 'sequential' | 'round-robin';
+
+      dnis_number_format?: '+e164' | 'e164' | 'national' | 'sip_username';
+
+      /**
+       * Generate ringback tone through 183 session progress message with early media.
+       */
+      generate_ringback_tone?: boolean;
+
+      /**
+       * When set, inbound phone calls will receive ISUP parameters via SIP headers.
+       * (Only when available and only when using TCP or TLS transport.)
+       */
+      isup_headers_enabled?: boolean;
+
+      /**
+       * Enable PRACK messages as defined in RFC3262.
+       */
+      prack_enabled?: boolean;
+
+      /**
+       * When enabled the SIP Connection will receive the Identity header with
+       * Shaken/Stir data in the SIP INVITE message of inbound calls, even when using UDP
+       * transport.
+       */
+      shaken_stir_enabled?: boolean;
+
+      /**
+       * When enabled, allows multiple devices to ring simultaneously on incoming calls.
+       */
+      simultaneous_ringing?: 'disabled' | 'enabled';
+
+      /**
+       * Defaults to true.
+       */
+      sip_compact_headers_enabled?: boolean;
+
+      /**
+       * The Telnyx-generated SIP subdomain for this UAC connection.
+       */
+      sip_subdomain?: string;
+
+      /**
+       * Controls which SIP URI callers may reach this connection.
+       */
+      sip_subdomain_receive_settings?: 'only_my_connections' | 'from_anyone';
+
+      /**
+       * Time(sec) before aborting if connection is not made.
+       */
+      timeout_1xx_secs?: number;
+
+      /**
+       * Time(sec) before aborting if call is unanswered (min: 1, max: 600).
+       */
+      timeout_2xx_secs?: number;
+    }
+
+    /**
+     * Internal Telnyx-side settings for a UAC connection.
+     */
+    export interface InternalUacSettings {
+      /**
+       * The SIP URI that Telnyx will call when handling an inbound request from the
+       * external peer. Do not include a `sip:` prefix. The value must be in the format
+       * `userinfo@<subdomain.>sip.telnyx.com` or
+       * `userinfo@<subdomain.>sipdev.telnyx.com`; the userinfo portion may contain only
+       * letters, digits, hyphens, and underscores.
+       */
+      destination_uri?: string;
+    }
+
+    export interface Outbound {
+      /**
+       * Set a phone number as the ani_override value to override caller id number on
+       * outbound calls.
+       */
+      ani_override?: string;
+
+      /**
+       * Specifies when we apply your ani_override setting. Only applies when
+       * ani_override is not blank.
+       */
+      ani_override_type?: 'always' | 'normal' | 'emergency';
+
+      /**
+       * Forces all SIP calls originated on this connection to be "parked" instead of
+       * "bridged" to the destination specified on the URI. Parked calls will return
+       * ringback to the caller and will await for a Call Control command to define which
+       * action will be taken next.
+       */
+      call_parking_enabled?: boolean | null;
+
+      /**
+       * When set, this will limit the total number of outbound calls to phone numbers
+       * associated with this connection.
+       */
+      channel_limit?: number;
+
+      /**
+       * Generate ringback tone through 183 session progress message with early media.
+       */
+      generate_ringback_tone?: boolean;
+
+      /**
+       * When set, ringback will not wait for indication before sending ringback tone to
+       * calling party.
+       */
+      instant_ringback_enabled?: boolean;
+
+      /**
+       * A 2-character country code specifying the country whose national dialing rules
+       * should be used. For example, if set to `US` then any US number can be dialed
+       * without preprending +1 to the number. When left blank, Telnyx will try US and GB
+       * dialing rules, in that order, by default.
+       */
+      localization?: string;
+
+      /**
+       * Identifies the associated outbound voice profile.
+       */
+      outbound_voice_profile_id?: string;
+
+      /**
+       * This setting only affects connections with Fax-type Outbound Voice Profiles. The
+       * setting dictates whether or not Telnyx sends a t.38 reinvite.<br/><br/> By
+       * default, Telnyx will send the re-invite. If set to `customer`, the caller is
+       * expected to send the t.38 reinvite.
+       */
+      t38_reinvite_source?:
+        | 'telnyx'
+        | 'customer'
+        | 'disabled'
+        | 'passthru'
+        | 'caller-passthru'
+        | 'callee-passthru';
+    }
+  }
+}
 
 /**
  * A UAC (User Agent Client) Connection registers Telnyx to your PBX — the opposite
@@ -113,467 +1443,872 @@ export type UacConnectionsDefaultFlatPagination = DefaultFlatPagination<UacConne
  * PBX doesn’t support outbound SIP registration or you need Telnyx to maintain the
  * registration.
  */
-export interface UacConnection {
+export interface UacConnectionListResponse {
+  /**
+   * Identifies the type of resource.
+   */
+  id?: string;
+
+  /**
+   * Defaults to true
+   */
+  active?: boolean;
+
+  /**
+   * `Latency` directs Telnyx to route media through the site with the lowest
+   * round-trip time to the user's connection. Telnyx calculates this time using ICMP
+   * ping messages. This can be disabled by specifying a site to handle all media.
+   */
+  anchorsite_override?: CredentialConnectionsAPI.AnchorsiteOverride;
+
+  /**
+   * The uuid of the push credential for Android
+   */
+  android_push_credential_id?: string | null;
+
+  /**
+   * The authentication strategy used by this connection.
+   */
+  authentication?: 'uac-authentication';
+
+  /**
+   * Specifies if call cost webhooks should be sent for this connection.
+   */
+  call_cost_in_webhooks?: boolean;
+
+  connection_name?: string;
+
+  /**
+   * ISO-8601 formatted date indicating when the resource was created.
+   */
+  created_at?: string;
+
+  /**
+   * When enabled, Telnyx will generate comfort noise when you place the call on
+   * hold. If disabled, you will need to generate comfort noise or on hold music to
+   * avoid RTP timeout.
+   */
+  default_on_hold_comfort_noise_enabled?: boolean;
+
+  /**
+   * Sets the type of DTMF digits sent from Telnyx to this Connection. Note that DTMF
+   * digits sent to Telnyx will be accepted in all formats.
+   */
+  dtmf_type?: CredentialConnectionsAPI.DtmfType;
+
+  /**
+   * Encode the SIP contact header sent by Telnyx to avoid issues for NAT or ALG
+   * scenarios.
+   */
+  encode_contact_header_enabled?: boolean;
+
+  /**
+   * Enable use of SRTP for encryption. Cannot be set if the transport_portocol is
+   * TLS.
+   */
+  encrypted_media?: CredentialConnectionsAPI.EncryptedMedia | null;
+
+  /**
+   * External SIP peer settings used by Telnyx when registering to your PBX and
+   * routing outbound calls.
+   */
+  external_uac_settings?: UacConnectionListResponse.ExternalUacSettings;
+
+  /**
+   * The Telnyx-managed FQDN generated for the UAC connection.
+   */
+  fqdn?: string;
+
+  /**
+   * The fixed outbound authentication mode used by UAC FQDN records.
+   */
+  fqdn_outbound_authentication?: 'credential-authentication';
+
+  /**
+   * FQDN records managed automatically by the UAC connection lifecycle.
+   */
+  fqdns?: Array<FqdnsAPI.Fqdn>;
+
+  inbound?: UacConnectionListResponse.Inbound;
+
+  /**
+   * Internal Telnyx-side settings for a UAC connection.
+   */
+  internal_uac_settings?: UacConnectionListResponse.InternalUacSettings;
+
+  /**
+   * The uuid of the push credential for Ios
+   */
+  ios_push_credential_id?: string | null;
+
   /**
-   * Identifies the type of resource.
+   * Configuration options for Jitter Buffer. Enables Jitter Buffer for RTP streams
+   * of SIP Trunking calls. The feature is off unless enabled. You may define min and
+   * max values in msec for customized buffering behaviors. Larger values add latency
+   * but tolerate more jitter, while smaller values reduce latency but are more
+   * sensitive to jitter and reordering.
    */
-  id?: string;
+  jitter_buffer?: Shared.ConnectionJitterBuffer;
 
   /**
-   * Defaults to true
+   * Controls when noise suppression is applied to calls. When set to 'inbound',
+   * noise suppression is applied to incoming audio. When set to 'outbound', it's
+   * applied to outgoing audio. When set to 'both', it's applied in both directions.
+   * When set to 'disabled', noise suppression is turned off.
    */
-  active?: boolean;
+  noise_suppression?: 'inbound' | 'outbound' | 'both' | 'disabled';
 
   /**
-   * `Latency` directs Telnyx to route media through the site with the lowest
-   * round-trip time to the user's connection. Telnyx calculates this time using ICMP
-   * ping messages. This can be disabled by specifying a site to handle all media.
+   * Configuration options for noise suppression. These settings are stored
+   * regardless of the noise_suppression value, but only take effect when
+   * noise_suppression is not 'disabled'. If you disable noise suppression and later
+   * re-enable it, the previously configured settings will be used.
    */
-  anchorsite_override?: CredentialConnectionsAPI.AnchorsiteOverride;
+  noise_suppression_details?: Shared.ConnectionNoiseSuppressionDetails;
 
   /**
-   * The uuid of the push credential for Android
+   * Enable on-net T38 if you prefer the sender and receiver negotiating T38 directly
+   * if both are on the Telnyx network. If this is disabled, Telnyx will be able to
+   * use T38 on just one leg of the call depending on each leg's settings.
    */
-  android_push_credential_id?: string | null;
+  onnet_t38_passthrough_enabled?: boolean;
+
+  outbound?: UacConnectionListResponse.Outbound;
 
   /**
-   * The authentication strategy used by this connection.
+   * The password to be used as part of the credentials. Must be 8 to 128 characters
+   * long.
    */
-  authentication?: 'uac-authentication';
+  password?: string;
 
   /**
-   * Specifies if call cost webhooks should be sent for this connection.
+   * Identifies the type of the resource.
    */
-  call_cost_in_webhooks?: boolean;
+  record_type?: string;
 
-  connection_name?: string;
+  /**
+   * The most recently known SIP registration status for this UAC connection.
+   */
+  registration_status?: string | null;
 
   /**
-   * ISO-8601 formatted date indicating when the resource was created.
+   * ISO 8601 formatted date indicating when the registration status was last
+   * updated.
    */
-  created_at?: string;
+  registration_status_updated_at?: string | null;
+
+  rtcp_settings?: CredentialConnectionsAPI.ConnectionRtcpSettings;
 
   /**
-   * When enabled, Telnyx will generate comfort noise when you place the call on
-   * hold. If disabled, you will need to generate comfort noise or on hold music to
-   * avoid RTP timeout.
+   * This feature enables inbound SIP URI calls to your Credential Auth Connection.
+   * If enabled for all (unrestricted) then anyone who calls the SIP URI
+   * <your-username>@telnyx.com will be connected to your Connection. You can also
+   * choose to allow only calls that are originated on any Connections under your
+   * account (internal).
    */
-  default_on_hold_comfort_noise_enabled?: boolean;
+  sip_uri_calling_preference?: 'disabled' | 'unrestricted' | 'internal';
 
   /**
-   * Sets the type of DTMF digits sent from Telnyx to this Connection. Note that DTMF
-   * digits sent to Telnyx will be accepted in all formats.
+   * Tags associated with the connection.
    */
-  dtmf_type?: CredentialConnectionsAPI.DtmfType;
+  tags?: Array<string>;
 
   /**
-   * Encode the SIP contact header sent by Telnyx to avoid issues for NAT or ALG
-   * scenarios.
+   * ISO-8601 formatted date indicating when the resource was updated.
    */
-  encode_contact_header_enabled?: boolean;
+  updated_at?: string;
 
   /**
-   * Enable use of SRTP for encryption. Cannot be set if the transport_portocol is
-   * TLS.
+   * The user name to be used as part of the credentials. Must be 4-32 characters
+   * long and alphanumeric values only (no spaces or special characters). At least
+   * one of the first 5 characters must be a letter.
    */
-  encrypted_media?: CredentialConnectionsAPI.EncryptedMedia | null;
+  user_name?: string;
+
+  /**
+   * Determines which webhook format will be used, Telnyx API v1 or v2.
+   */
+  webhook_api_version?: '1' | '2';
+
+  /**
+   * The failover URL where webhooks related to this connection will be sent if
+   * sending to the primary URL fails. Must include a scheme, such as 'https'.
+   */
+  webhook_event_failover_url?: string | null;
+
+  /**
+   * The URL where webhooks related to this connection will be sent. Must include a
+   * scheme, such as 'https'.
+   */
+  webhook_event_url?: string;
+
+  /**
+   * Specifies how many seconds to wait before timing out a webhook.
+   */
+  webhook_timeout_secs?: number | null;
+}
+
+export namespace UacConnectionListResponse {
+  /**
+   * External SIP peer settings used by Telnyx when registering to your PBX and
+   * routing outbound calls.
+   */
+  export interface ExternalUacSettings {
+    /**
+     * The authentication username used in SIP digest authentication. If not set, the
+     * Username value will be used.
+     */
+    auth_username?: string | null;
+
+    /**
+     * The registration interval, in seconds, indicating how often the system refreshes
+     * the SIP registration with the external SIP peer.
+     */
+    expiration_sec?: number | null;
+
+    /**
+     * The user portion of the SIP From header used in outbound requests. This controls
+     * the caller identity presented to the external SIP peer.
+     */
+    from_user?: string | null;
+
+    /**
+     * An optional SIP proxy used to route outbound requests before reaching the
+     * external SIP peer.
+     */
+    outbound_proxy?: string | null;
+
+    /**
+     * The SIP password used for digest authentication with the external SIP peer.
+     */
+    password?: string;
+
+    /**
+     * The SIP proxy address of the external SIP peer used for registrations and
+     * outbound call routing.
+     */
+    proxy?: string;
+
+    /**
+     * The transport protocol used for SIP signaling when communicating with the
+     * external SIP peer. One of UDP, TLS, or TCP.
+     */
+    transport?: 'UDP' | 'TLS' | 'TCP' | null;
+
+    /**
+     * The SIP username used to authenticate with the external SIP peer for
+     * registrations and outbound calls. Must start with a letter or number and contain
+     * only letters, numbers, hyphens, and underscores.
+     */
+    username?: string;
+  }
+
+  export interface Inbound {
+    /**
+     * This setting allows you to set the format with which the caller's number (ANI)
+     * is sent for inbound phone calls.
+     */
+    ani_number_format?: '+E.164' | 'E.164' | '+E.164-national' | 'E.164-national';
+
+    /**
+     * When set, this will limit the total number of inbound calls to phone numbers
+     * associated with this connection.
+     */
+    channel_limit?: number;
+
+    /**
+     * Defines the list of codecs that Telnyx will send for inbound calls to a specific
+     * number on your portal account, in priority order. This only works when the
+     * Connection the number is assigned to uses Media Handling mode: default. OPUS and
+     * H.264 codecs are available only when using TCP or TLS transport for SIP.
+     */
+    codecs?: Array<string>;
+
+    /**
+     * Default routing method to be used when a number is associated with the
+     * connection. Must be one of the routing method types or left blank, other values
+     * are not allowed.
+     */
+    default_routing_method?: 'sequential' | 'round-robin';
+
+    dnis_number_format?: '+e164' | 'e164' | 'national' | 'sip_username';
+
+    /**
+     * Generate ringback tone through 183 session progress message with early media.
+     */
+    generate_ringback_tone?: boolean;
+
+    /**
+     * When set, inbound phone calls will receive ISUP parameters via SIP headers.
+     * (Only when available and only when using TCP or TLS transport.)
+     */
+    isup_headers_enabled?: boolean;
+
+    /**
+     * Enable PRACK messages as defined in RFC3262.
+     */
+    prack_enabled?: boolean;
+
+    /**
+     * When enabled the SIP Connection will receive the Identity header with
+     * Shaken/Stir data in the SIP INVITE message of inbound calls, even when using UDP
+     * transport.
+     */
+    shaken_stir_enabled?: boolean;
+
+    /**
+     * When enabled, allows multiple devices to ring simultaneously on incoming calls.
+     */
+    simultaneous_ringing?: 'disabled' | 'enabled';
+
+    /**
+     * Defaults to true.
+     */
+    sip_compact_headers_enabled?: boolean;
+
+    /**
+     * The Telnyx-generated SIP subdomain for this UAC connection.
+     */
+    sip_subdomain?: string;
+
+    /**
+     * Controls which SIP URI callers may reach this connection.
+     */
+    sip_subdomain_receive_settings?: 'only_my_connections' | 'from_anyone';
+
+    /**
+     * Time(sec) before aborting if connection is not made.
+     */
+    timeout_1xx_secs?: number;
+
+    /**
+     * Time(sec) before aborting if call is unanswered (min: 1, max: 600).
+     */
+    timeout_2xx_secs?: number;
+  }
+
+  /**
+   * Internal Telnyx-side settings for a UAC connection.
+   */
+  export interface InternalUacSettings {
+    /**
+     * The SIP URI that Telnyx will call when handling an inbound request from the
+     * external peer. Do not include a `sip:` prefix. The value must be in the format
+     * `userinfo@<subdomain.>sip.telnyx.com` or
+     * `userinfo@<subdomain.>sipdev.telnyx.com`; the userinfo portion may contain only
+     * letters, digits, hyphens, and underscores.
+     */
+    destination_uri?: string;
+  }
+
+  export interface Outbound {
+    /**
+     * Set a phone number as the ani_override value to override caller id number on
+     * outbound calls.
+     */
+    ani_override?: string;
+
+    /**
+     * Specifies when we apply your ani_override setting. Only applies when
+     * ani_override is not blank.
+     */
+    ani_override_type?: 'always' | 'normal' | 'emergency';
+
+    /**
+     * Forces all SIP calls originated on this connection to be "parked" instead of
+     * "bridged" to the destination specified on the URI. Parked calls will return
+     * ringback to the caller and will await for a Call Control command to define which
+     * action will be taken next.
+     */
+    call_parking_enabled?: boolean | null;
+
+    /**
+     * When set, this will limit the total number of outbound calls to phone numbers
+     * associated with this connection.
+     */
+    channel_limit?: number;
+
+    /**
+     * Generate ringback tone through 183 session progress message with early media.
+     */
+    generate_ringback_tone?: boolean;
+
+    /**
+     * When set, ringback will not wait for indication before sending ringback tone to
+     * calling party.
+     */
+    instant_ringback_enabled?: boolean;
+
+    /**
+     * A 2-character country code specifying the country whose national dialing rules
+     * should be used. For example, if set to `US` then any US number can be dialed
+     * without preprending +1 to the number. When left blank, Telnyx will try US and GB
+     * dialing rules, in that order, by default.
+     */
+    localization?: string;
+
+    /**
+     * Identifies the associated outbound voice profile.
+     */
+    outbound_voice_profile_id?: string;
+
+    /**
+     * This setting only affects connections with Fax-type Outbound Voice Profiles. The
+     * setting dictates whether or not Telnyx sends a t.38 reinvite.<br/><br/> By
+     * default, Telnyx will send the re-invite. If set to `customer`, the caller is
+     * expected to send the t.38 reinvite.
+     */
+    t38_reinvite_source?:
+      | 'telnyx'
+      | 'customer'
+      | 'disabled'
+      | 'passthru'
+      | 'caller-passthru'
+      | 'callee-passthru';
+  }
+}
 
+export interface UacConnectionDeleteResponse {
   /**
-   * External SIP peer settings used by Telnyx when registering to your PBX and
-   * routing outbound calls.
+   * A UAC (User Agent Client) Connection registers Telnyx to your PBX — the opposite
+   * of a standard SIP trunk, where the PBX registers to Telnyx. Use UAC when your
+   * PBX doesn’t support outbound SIP registration or you need Telnyx to maintain the
+   * registration.
    */
-  external_uac_settings?: UacExternalSettings;
+  data?: UacConnectionDeleteResponse.Data;
+}
 
+export namespace UacConnectionDeleteResponse {
   /**
-   * The Telnyx-managed FQDN generated for the UAC connection.
+   * A UAC (User Agent Client) Connection registers Telnyx to your PBX — the opposite
+   * of a standard SIP trunk, where the PBX registers to Telnyx. Use UAC when your
+   * PBX doesn’t support outbound SIP registration or you need Telnyx to maintain the
+   * registration.
    */
-  fqdn?: string;
+  export interface Data {
+    /**
+     * Identifies the type of resource.
+     */
+    id?: string;
 
-  /**
-   * The fixed outbound authentication mode used by UAC FQDN records.
-   */
-  fqdn_outbound_authentication?: 'credential-authentication';
+    /**
+     * Defaults to true
+     */
+    active?: boolean;
 
-  /**
-   * FQDN records managed automatically by the UAC connection lifecycle.
-   */
-  fqdns?: Array<FqdnsAPI.Fqdn>;
+    /**
+     * `Latency` directs Telnyx to route media through the site with the lowest
+     * round-trip time to the user's connection. Telnyx calculates this time using ICMP
+     * ping messages. This can be disabled by specifying a site to handle all media.
+     */
+    anchorsite_override?: CredentialConnectionsAPI.AnchorsiteOverride;
 
-  inbound?: UacInbound;
+    /**
+     * The uuid of the push credential for Android
+     */
+    android_push_credential_id?: string | null;
 
-  /**
-   * Internal Telnyx-side settings for a UAC connection.
-   */
-  internal_uac_settings?: UacInternalSettings;
+    /**
+     * The authentication strategy used by this connection.
+     */
+    authentication?: 'uac-authentication';
 
-  /**
-   * The uuid of the push credential for Ios
-   */
-  ios_push_credential_id?: string | null;
+    /**
+     * Specifies if call cost webhooks should be sent for this connection.
+     */
+    call_cost_in_webhooks?: boolean;
 
-  /**
-   * Configuration options for Jitter Buffer. Enables Jitter Buffer for RTP streams
-   * of SIP Trunking calls. The feature is off unless enabled. You may define min and
-   * max values in msec for customized buffering behaviors. Larger values add latency
-   * but tolerate more jitter, while smaller values reduce latency but are more
-   * sensitive to jitter and reordering.
-   */
-  jitter_buffer?: Shared.ConnectionJitterBuffer;
+    connection_name?: string;
 
-  /**
-   * Controls when noise suppression is applied to calls. When set to 'inbound',
-   * noise suppression is applied to incoming audio. When set to 'outbound', it's
-   * applied to outgoing audio. When set to 'both', it's applied in both directions.
-   * When set to 'disabled', noise suppression is turned off.
-   */
-  noise_suppression?: 'inbound' | 'outbound' | 'both' | 'disabled';
+    /**
+     * ISO-8601 formatted date indicating when the resource was created.
+     */
+    created_at?: string;
 
-  /**
-   * Configuration options for noise suppression. These settings are stored
-   * regardless of the noise_suppression value, but only take effect when
-   * noise_suppression is not 'disabled'. If you disable noise suppression and later
-   * re-enable it, the previously configured settings will be used.
-   */
-  noise_suppression_details?: Shared.ConnectionNoiseSuppressionDetails;
+    /**
+     * When enabled, Telnyx will generate comfort noise when you place the call on
+     * hold. If disabled, you will need to generate comfort noise or on hold music to
+     * avoid RTP timeout.
+     */
+    default_on_hold_comfort_noise_enabled?: boolean;
 
-  /**
-   * Enable on-net T38 if you prefer the sender and receiver negotiating T38 directly
-   * if both are on the Telnyx network. If this is disabled, Telnyx will be able to
-   * use T38 on just one leg of the call depending on each leg's settings.
-   */
-  onnet_t38_passthrough_enabled?: boolean;
+    /**
+     * Sets the type of DTMF digits sent from Telnyx to this Connection. Note that DTMF
+     * digits sent to Telnyx will be accepted in all formats.
+     */
+    dtmf_type?: CredentialConnectionsAPI.DtmfType;
 
-  outbound?: UacOutbound;
+    /**
+     * Encode the SIP contact header sent by Telnyx to avoid issues for NAT or ALG
+     * scenarios.
+     */
+    encode_contact_header_enabled?: boolean;
 
-  /**
-   * The password to be used as part of the credentials. Must be 8 to 128 characters
-   * long.
-   */
-  password?: string;
+    /**
+     * Enable use of SRTP for encryption. Cannot be set if the transport_portocol is
+     * TLS.
+     */
+    encrypted_media?: CredentialConnectionsAPI.EncryptedMedia | null;
 
-  /**
-   * Identifies the type of the resource.
-   */
-  record_type?: string;
+    /**
+     * External SIP peer settings used by Telnyx when registering to your PBX and
+     * routing outbound calls.
+     */
+    external_uac_settings?: Data.ExternalUacSettings;
 
-  /**
-   * The most recently known SIP registration status for this UAC connection.
-   */
-  registration_status?: string | null;
+    /**
+     * The Telnyx-managed FQDN generated for the UAC connection.
+     */
+    fqdn?: string;
 
-  /**
-   * ISO 8601 formatted date indicating when the registration status was last
-   * updated.
-   */
-  registration_status_updated_at?: string | null;
+    /**
+     * The fixed outbound authentication mode used by UAC FQDN records.
+     */
+    fqdn_outbound_authentication?: 'credential-authentication';
 
-  rtcp_settings?: CredentialConnectionsAPI.ConnectionRtcpSettings;
+    /**
+     * FQDN records managed automatically by the UAC connection lifecycle.
+     */
+    fqdns?: Array<FqdnsAPI.Fqdn>;
 
-  /**
-   * This feature enables inbound SIP URI calls to your Credential Auth Connection.
-   * If enabled for all (unrestricted) then anyone who calls the SIP URI
-   * <your-username>@telnyx.com will be connected to your Connection. You can also
-   * choose to allow only calls that are originated on any Connections under your
-   * account (internal).
-   */
-  sip_uri_calling_preference?: 'disabled' | 'unrestricted' | 'internal';
+    inbound?: Data.Inbound;
 
-  /**
-   * Tags associated with the connection.
-   */
-  tags?: Array<string>;
+    /**
+     * Internal Telnyx-side settings for a UAC connection.
+     */
+    internal_uac_settings?: Data.InternalUacSettings;
 
-  /**
-   * ISO-8601 formatted date indicating when the resource was updated.
-   */
-  updated_at?: string;
+    /**
+     * The uuid of the push credential for Ios
+     */
+    ios_push_credential_id?: string | null;
 
-  /**
-   * The user name to be used as part of the credentials. Must be 4-32 characters
-   * long and alphanumeric values only (no spaces or special characters). At least
-   * one of the first 5 characters must be a letter.
-   */
-  user_name?: string;
+    /**
+     * Configuration options for Jitter Buffer. Enables Jitter Buffer for RTP streams
+     * of SIP Trunking calls. The feature is off unless enabled. You may define min and
+     * max values in msec for customized buffering behaviors. Larger values add latency
+     * but tolerate more jitter, while smaller values reduce latency but are more
+     * sensitive to jitter and reordering.
+     */
+    jitter_buffer?: Shared.ConnectionJitterBuffer;
 
-  /**
-   * Determines which webhook format will be used, Telnyx API v1 or v2.
-   */
-  webhook_api_version?: '1' | '2';
+    /**
+     * Controls when noise suppression is applied to calls. When set to 'inbound',
+     * noise suppression is applied to incoming audio. When set to 'outbound', it's
+     * applied to outgoing audio. When set to 'both', it's applied in both directions.
+     * When set to 'disabled', noise suppression is turned off.
+     */
+    noise_suppression?: 'inbound' | 'outbound' | 'both' | 'disabled';
 
-  /**
-   * The failover URL where webhooks related to this connection will be sent if
-   * sending to the primary URL fails. Must include a scheme, such as 'https'.
-   */
-  webhook_event_failover_url?: string | null;
+    /**
+     * Configuration options for noise suppression. These settings are stored
+     * regardless of the noise_suppression value, but only take effect when
+     * noise_suppression is not 'disabled'. If you disable noise suppression and later
+     * re-enable it, the previously configured settings will be used.
+     */
+    noise_suppression_details?: Shared.ConnectionNoiseSuppressionDetails;
 
-  /**
-   * The URL where webhooks related to this connection will be sent. Must include a
-   * scheme, such as 'https'.
-   */
-  webhook_event_url?: string;
+    /**
+     * Enable on-net T38 if you prefer the sender and receiver negotiating T38 directly
+     * if both are on the Telnyx network. If this is disabled, Telnyx will be able to
+     * use T38 on just one leg of the call depending on each leg's settings.
+     */
+    onnet_t38_passthrough_enabled?: boolean;
 
-  /**
-   * Specifies how many seconds to wait before timing out a webhook.
-   */
-  webhook_timeout_secs?: number | null;
-}
+    outbound?: Data.Outbound;
 
-/**
- * External SIP peer settings used by Telnyx when registering to your PBX and
- * routing outbound calls.
- */
-export interface UacExternalSettings {
-  /**
-   * The authentication username used in SIP digest authentication. If not set, the
-   * Username value will be used.
-   */
-  auth_username?: string | null;
+    /**
+     * The password to be used as part of the credentials. Must be 8 to 128 characters
+     * long.
+     */
+    password?: string;
 
-  /**
-   * The registration interval, in seconds, indicating how often the system refreshes
-   * the SIP registration with the external SIP peer.
-   */
-  expiration_sec?: number | null;
+    /**
+     * Identifies the type of the resource.
+     */
+    record_type?: string;
 
-  /**
-   * The user portion of the SIP From header used in outbound requests. This controls
-   * the caller identity presented to the external SIP peer.
-   */
-  from_user?: string | null;
+    /**
+     * The most recently known SIP registration status for this UAC connection.
+     */
+    registration_status?: string | null;
 
-  /**
-   * An optional SIP proxy used to route outbound requests before reaching the
-   * external SIP peer.
-   */
-  outbound_proxy?: string | null;
+    /**
+     * ISO 8601 formatted date indicating when the registration status was last
+     * updated.
+     */
+    registration_status_updated_at?: string | null;
 
-  /**
-   * The SIP password used for digest authentication with the external SIP peer.
-   */
-  password?: string;
+    rtcp_settings?: CredentialConnectionsAPI.ConnectionRtcpSettings;
 
-  /**
-   * The SIP proxy address of the external SIP peer used for registrations and
-   * outbound call routing.
-   */
-  proxy?: string;
+    /**
+     * This feature enables inbound SIP URI calls to your Credential Auth Connection.
+     * If enabled for all (unrestricted) then anyone who calls the SIP URI
+     * <your-username>@telnyx.com will be connected to your Connection. You can also
+     * choose to allow only calls that are originated on any Connections under your
+     * account (internal).
+     */
+    sip_uri_calling_preference?: 'disabled' | 'unrestricted' | 'internal';
 
-  /**
-   * The transport protocol used for SIP signaling when communicating with the
-   * external SIP peer. One of UDP, TLS, or TCP.
-   */
-  transport?: 'UDP' | 'TLS' | 'TCP' | null;
+    /**
+     * Tags associated with the connection.
+     */
+    tags?: Array<string>;
 
-  /**
-   * The SIP username used to authenticate with the external SIP peer for
-   * registrations and outbound calls. Must start with a letter or number and contain
-   * only letters, numbers, hyphens, and underscores.
-   */
-  username?: string;
-}
+    /**
+     * ISO-8601 formatted date indicating when the resource was updated.
+     */
+    updated_at?: string;
 
-export interface UacInbound {
-  /**
-   * This setting allows you to set the format with which the caller's number (ANI)
-   * is sent for inbound phone calls.
-   */
-  ani_number_format?: '+E.164' | 'E.164' | '+E.164-national' | 'E.164-national';
+    /**
+     * The user name to be used as part of the credentials. Must be 4-32 characters
+     * long and alphanumeric values only (no spaces or special characters). At least
+     * one of the first 5 characters must be a letter.
+     */
+    user_name?: string;
 
-  /**
-   * When set, this will limit the total number of inbound calls to phone numbers
-   * associated with this connection.
-   */
-  channel_limit?: number;
+    /**
+     * Determines which webhook format will be used, Telnyx API v1 or v2.
+     */
+    webhook_api_version?: '1' | '2';
 
-  /**
-   * Defines the list of codecs that Telnyx will send for inbound calls to a specific
-   * number on your portal account, in priority order. This only works when the
-   * Connection the number is assigned to uses Media Handling mode: default. OPUS and
-   * H.264 codecs are available only when using TCP or TLS transport for SIP.
-   */
-  codecs?: Array<string>;
+    /**
+     * The failover URL where webhooks related to this connection will be sent if
+     * sending to the primary URL fails. Must include a scheme, such as 'https'.
+     */
+    webhook_event_failover_url?: string | null;
 
-  /**
-   * Default routing method to be used when a number is associated with the
-   * connection. Must be one of the routing method types or left blank, other values
-   * are not allowed.
-   */
-  default_routing_method?: 'sequential' | 'round-robin';
+    /**
+     * The URL where webhooks related to this connection will be sent. Must include a
+     * scheme, such as 'https'.
+     */
+    webhook_event_url?: string;
 
-  dnis_number_format?: '+e164' | 'e164' | 'national' | 'sip_username';
+    /**
+     * Specifies how many seconds to wait before timing out a webhook.
+     */
+    webhook_timeout_secs?: number | null;
+  }
 
-  /**
-   * Generate ringback tone through 183 session progress message with early media.
-   */
-  generate_ringback_tone?: boolean;
+  export namespace Data {
+    /**
+     * External SIP peer settings used by Telnyx when registering to your PBX and
+     * routing outbound calls.
+     */
+    export interface ExternalUacSettings {
+      /**
+       * The authentication username used in SIP digest authentication. If not set, the
+       * Username value will be used.
+       */
+      auth_username?: string | null;
 
-  /**
-   * When set, inbound phone calls will receive ISUP parameters via SIP headers.
-   * (Only when available and only when using TCP or TLS transport.)
-   */
-  isup_headers_enabled?: boolean;
+      /**
+       * The registration interval, in seconds, indicating how often the system refreshes
+       * the SIP registration with the external SIP peer.
+       */
+      expiration_sec?: number | null;
 
-  /**
-   * Enable PRACK messages as defined in RFC3262.
-   */
-  prack_enabled?: boolean;
+      /**
+       * The user portion of the SIP From header used in outbound requests. This controls
+       * the caller identity presented to the external SIP peer.
+       */
+      from_user?: string | null;
+
+      /**
+       * An optional SIP proxy used to route outbound requests before reaching the
+       * external SIP peer.
+       */
+      outbound_proxy?: string | null;
+
+      /**
+       * The SIP password used for digest authentication with the external SIP peer.
+       */
+      password?: string;
+
+      /**
+       * The SIP proxy address of the external SIP peer used for registrations and
+       * outbound call routing.
+       */
+      proxy?: string;
+
+      /**
+       * The transport protocol used for SIP signaling when communicating with the
+       * external SIP peer. One of UDP, TLS, or TCP.
+       */
+      transport?: 'UDP' | 'TLS' | 'TCP' | null;
+
+      /**
+       * The SIP username used to authenticate with the external SIP peer for
+       * registrations and outbound calls. Must start with a letter or number and contain
+       * only letters, numbers, hyphens, and underscores.
+       */
+      username?: string;
+    }
+
+    export interface Inbound {
+      /**
+       * This setting allows you to set the format with which the caller's number (ANI)
+       * is sent for inbound phone calls.
+       */
+      ani_number_format?: '+E.164' | 'E.164' | '+E.164-national' | 'E.164-national';
+
+      /**
+       * When set, this will limit the total number of inbound calls to phone numbers
+       * associated with this connection.
+       */
+      channel_limit?: number;
+
+      /**
+       * Defines the list of codecs that Telnyx will send for inbound calls to a specific
+       * number on your portal account, in priority order. This only works when the
+       * Connection the number is assigned to uses Media Handling mode: default. OPUS and
+       * H.264 codecs are available only when using TCP or TLS transport for SIP.
+       */
+      codecs?: Array<string>;
+
+      /**
+       * Default routing method to be used when a number is associated with the
+       * connection. Must be one of the routing method types or left blank, other values
+       * are not allowed.
+       */
+      default_routing_method?: 'sequential' | 'round-robin';
 
-  /**
-   * When enabled the SIP Connection will receive the Identity header with
-   * Shaken/Stir data in the SIP INVITE message of inbound calls, even when using UDP
-   * transport.
-   */
-  shaken_stir_enabled?: boolean;
+      dnis_number_format?: '+e164' | 'e164' | 'national' | 'sip_username';
 
-  /**
-   * When enabled, allows multiple devices to ring simultaneously on incoming calls.
-   */
-  simultaneous_ringing?: 'disabled' | 'enabled';
+      /**
+       * Generate ringback tone through 183 session progress message with early media.
+       */
+      generate_ringback_tone?: boolean;
 
-  /**
-   * Defaults to true.
-   */
-  sip_compact_headers_enabled?: boolean;
+      /**
+       * When set, inbound phone calls will receive ISUP parameters via SIP headers.
+       * (Only when available and only when using TCP or TLS transport.)
+       */
+      isup_headers_enabled?: boolean;
 
-  /**
-   * The Telnyx-generated SIP subdomain for this UAC connection.
-   */
-  sip_subdomain?: string;
+      /**
+       * Enable PRACK messages as defined in RFC3262.
+       */
+      prack_enabled?: boolean;
 
-  /**
-   * Controls which SIP URI callers may reach this connection.
-   */
-  sip_subdomain_receive_settings?: 'only_my_connections' | 'from_anyone';
+      /**
+       * When enabled the SIP Connection will receive the Identity header with
+       * Shaken/Stir data in the SIP INVITE message of inbound calls, even when using UDP
+       * transport.
+       */
+      shaken_stir_enabled?: boolean;
 
-  /**
-   * Time(sec) before aborting if connection is not made.
-   */
-  timeout_1xx_secs?: number;
+      /**
+       * When enabled, allows multiple devices to ring simultaneously on incoming calls.
+       */
+      simultaneous_ringing?: 'disabled' | 'enabled';
 
-  /**
-   * Time(sec) before aborting if call is unanswered (min: 1, max: 600).
-   */
-  timeout_2xx_secs?: number;
-}
+      /**
+       * Defaults to true.
+       */
+      sip_compact_headers_enabled?: boolean;
 
-/**
- * Internal Telnyx-side settings for a UAC connection.
- */
-export interface UacInternalSettings {
-  /**
-   * The SIP URI that Telnyx will call when handling an inbound request from the
-   * external peer. Do not include a `sip:` prefix. The value must be in the format
-   * `userinfo@<subdomain.>sip.telnyx.com` or
-   * `userinfo@<subdomain.>sipdev.telnyx.com`; the userinfo portion may contain only
-   * letters, digits, hyphens, and underscores.
-   */
-  destination_uri?: string;
-}
+      /**
+       * The Telnyx-generated SIP subdomain for this UAC connection.
+       */
+      sip_subdomain?: string;
 
-export interface UacOutbound {
-  /**
-   * Set a phone number as the ani_override value to override caller id number on
-   * outbound calls.
-   */
-  ani_override?: string;
+      /**
+       * Controls which SIP URI callers may reach this connection.
+       */
+      sip_subdomain_receive_settings?: 'only_my_connections' | 'from_anyone';
 
-  /**
-   * Specifies when we apply your ani_override setting. Only applies when
-   * ani_override is not blank.
-   */
-  ani_override_type?: 'always' | 'normal' | 'emergency';
+      /**
+       * Time(sec) before aborting if connection is not made.
+       */
+      timeout_1xx_secs?: number;
 
-  /**
-   * Forces all SIP calls originated on this connection to be "parked" instead of
-   * "bridged" to the destination specified on the URI. Parked calls will return
-   * ringback to the caller and will await for a Call Control command to define which
-   * action will be taken next.
-   */
-  call_parking_enabled?: boolean | null;
+      /**
+       * Time(sec) before aborting if call is unanswered (min: 1, max: 600).
+       */
+      timeout_2xx_secs?: number;
+    }
 
-  /**
-   * When set, this will limit the total number of outbound calls to phone numbers
-   * associated with this connection.
-   */
-  channel_limit?: number;
+    /**
+     * Internal Telnyx-side settings for a UAC connection.
+     */
+    export interface InternalUacSettings {
+      /**
+       * The SIP URI that Telnyx will call when handling an inbound request from the
+       * external peer. Do not include a `sip:` prefix. The value must be in the format
+       * `userinfo@<subdomain.>sip.telnyx.com` or
+       * `userinfo@<subdomain.>sipdev.telnyx.com`; the userinfo portion may contain only
+       * letters, digits, hyphens, and underscores.
+       */
+      destination_uri?: string;
+    }
 
-  /**
-   * Generate ringback tone through 183 session progress message with early media.
-   */
-  generate_ringback_tone?: boolean;
+    export interface Outbound {
+      /**
+       * Set a phone number as the ani_override value to override caller id number on
+       * outbound calls.
+       */
+      ani_override?: string;
 
-  /**
-   * When set, ringback will not wait for indication before sending ringback tone to
-   * calling party.
-   */
-  instant_ringback_enabled?: boolean;
+      /**
+       * Specifies when we apply your ani_override setting. Only applies when
+       * ani_override is not blank.
+       */
+      ani_override_type?: 'always' | 'normal' | 'emergency';
 
-  /**
-   * A 2-character country code specifying the country whose national dialing rules
-   * should be used. For example, if set to `US` then any US number can be dialed
-   * without preprending +1 to the number. When left blank, Telnyx will try US and GB
-   * dialing rules, in that order, by default.
-   */
-  localization?: string;
+      /**
+       * Forces all SIP calls originated on this connection to be "parked" instead of
+       * "bridged" to the destination specified on the URI. Parked calls will return
+       * ringback to the caller and will await for a Call Control command to define which
+       * action will be taken next.
+       */
+      call_parking_enabled?: boolean | null;
 
-  /**
-   * Identifies the associated outbound voice profile.
-   */
-  outbound_voice_profile_id?: string;
+      /**
+       * When set, this will limit the total number of outbound calls to phone numbers
+       * associated with this connection.
+       */
+      channel_limit?: number;
 
-  /**
-   * This setting only affects connections with Fax-type Outbound Voice Profiles. The
-   * setting dictates whether or not Telnyx sends a t.38 reinvite.<br/><br/> By
-   * default, Telnyx will send the re-invite. If set to `customer`, the caller is
-   * expected to send the t.38 reinvite.
-   */
-  t38_reinvite_source?:
-    | 'telnyx'
-    | 'customer'
-    | 'disabled'
-    | 'passthru'
-    | 'caller-passthru'
-    | 'callee-passthru';
-}
+      /**
+       * Generate ringback tone through 183 session progress message with early media.
+       */
+      generate_ringback_tone?: boolean;
 
-export interface UacConnectionCreateResponse {
-  /**
-   * A UAC (User Agent Client) Connection registers Telnyx to your PBX — the opposite
-   * of a standard SIP trunk, where the PBX registers to Telnyx. Use UAC when your
-   * PBX doesn’t support outbound SIP registration or you need Telnyx to maintain the
-   * registration.
-   */
-  data?: UacConnection;
-}
+      /**
+       * When set, ringback will not wait for indication before sending ringback tone to
+       * calling party.
+       */
+      instant_ringback_enabled?: boolean;
 
-export interface UacConnectionRetrieveResponse {
-  /**
-   * A UAC (User Agent Client) Connection registers Telnyx to your PBX — the opposite
-   * of a standard SIP trunk, where the PBX registers to Telnyx. Use UAC when your
-   * PBX doesn’t support outbound SIP registration or you need Telnyx to maintain the
-   * registration.
-   */
-  data?: UacConnection;
-}
+      /**
+       * A 2-character country code specifying the country whose national dialing rules
+       * should be used. For example, if set to `US` then any US number can be dialed
+       * without preprending +1 to the number. When left blank, Telnyx will try US and GB
+       * dialing rules, in that order, by default.
+       */
+      localization?: string;
 
-export interface UacConnectionUpdateResponse {
-  /**
-   * A UAC (User Agent Client) Connection registers Telnyx to your PBX — the opposite
-   * of a standard SIP trunk, where the PBX registers to Telnyx. Use UAC when your
-   * PBX doesn’t support outbound SIP registration or you need Telnyx to maintain the
-   * registration.
-   */
-  data?: UacConnection;
-}
+      /**
+       * Identifies the associated outbound voice profile.
+       */
+      outbound_voice_profile_id?: string;
 
-export interface UacConnectionDeleteResponse {
-  /**
-   * A UAC (User Agent Client) Connection registers Telnyx to your PBX — the opposite
-   * of a standard SIP trunk, where the PBX registers to Telnyx. Use UAC when your
-   * PBX doesn’t support outbound SIP registration or you need Telnyx to maintain the
-   * registration.
-   */
-  data?: UacConnection;
+      /**
+       * This setting only affects connections with Fax-type Outbound Voice Profiles. The
+       * setting dictates whether or not Telnyx sends a t.38 reinvite.<br/><br/> By
+       * default, Telnyx will send the re-invite. If set to `customer`, the caller is
+       * expected to send the t.38 reinvite.
+       */
+      t38_reinvite_source?:
+        | 'telnyx'
+        | 'customer'
+        | 'disabled'
+        | 'passthru'
+        | 'caller-passthru'
+        | 'callee-passthru';
+    }
+  }
 }
 
 export interface UacConnectionCreateParams {
@@ -633,7 +2368,7 @@ export interface UacConnectionCreateParams {
    * External SIP peer settings used by Telnyx when registering to your PBX and
    * routing outbound calls.
    */
-  external_uac_settings?: UacExternalSettings;
+  external_uac_settings?: UacConnectionCreateParams.ExternalUacSettings;
 
   /**
    * Inbound settings that can be supplied when creating or updating a UAC
@@ -645,7 +2380,7 @@ export interface UacConnectionCreateParams {
   /**
    * Internal Telnyx-side settings for a UAC connection.
    */
-  internal_uac_settings?: UacInternalSettings;
+  internal_uac_settings?: UacConnectionCreateParams.InternalUacSettings;
 
   /**
    * The uuid of the push credential for Ios
@@ -684,7 +2419,7 @@ export interface UacConnectionCreateParams {
    */
   onnet_t38_passthrough_enabled?: boolean;
 
-  outbound?: UacOutbound;
+  outbound?: UacConnectionCreateParams.Outbound;
 
   /**
    * The password to be used as part of the credentials. Must be 8 to 128 characters
@@ -740,6 +2475,60 @@ export interface UacConnectionCreateParams {
 }
 
 export namespace UacConnectionCreateParams {
+  /**
+   * External SIP peer settings used by Telnyx when registering to your PBX and
+   * routing outbound calls.
+   */
+  export interface ExternalUacSettings {
+    /**
+     * The authentication username used in SIP digest authentication. If not set, the
+     * Username value will be used.
+     */
+    auth_username?: string | null;
+
+    /**
+     * The registration interval, in seconds, indicating how often the system refreshes
+     * the SIP registration with the external SIP peer.
+     */
+    expiration_sec?: number | null;
+
+    /**
+     * The user portion of the SIP From header used in outbound requests. This controls
+     * the caller identity presented to the external SIP peer.
+     */
+    from_user?: string | null;
+
+    /**
+     * An optional SIP proxy used to route outbound requests before reaching the
+     * external SIP peer.
+     */
+    outbound_proxy?: string | null;
+
+    /**
+     * The SIP password used for digest authentication with the external SIP peer.
+     */
+    password?: string;
+
+    /**
+     * The SIP proxy address of the external SIP peer used for registrations and
+     * outbound call routing.
+     */
+    proxy?: string;
+
+    /**
+     * The transport protocol used for SIP signaling when communicating with the
+     * external SIP peer. One of UDP, TLS, or TCP.
+     */
+    transport?: 'UDP' | 'TLS' | 'TCP' | null;
+
+    /**
+     * The SIP username used to authenticate with the external SIP peer for
+     * registrations and outbound calls. Must start with a letter or number and contain
+     * only letters, numbers, hyphens, and underscores.
+     */
+    username?: string;
+  }
+
   /**
    * Inbound settings that can be supplied when creating or updating a UAC
    * connection. The SIP subdomain fields returned in UAC connection responses are
@@ -818,6 +2607,86 @@ export namespace UacConnectionCreateParams {
      */
     timeout_2xx_secs?: number;
   }
+
+  /**
+   * Internal Telnyx-side settings for a UAC connection.
+   */
+  export interface InternalUacSettings {
+    /**
+     * The SIP URI that Telnyx will call when handling an inbound request from the
+     * external peer. Do not include a `sip:` prefix. The value must be in the format
+     * `userinfo@<subdomain.>sip.telnyx.com` or
+     * `userinfo@<subdomain.>sipdev.telnyx.com`; the userinfo portion may contain only
+     * letters, digits, hyphens, and underscores.
+     */
+    destination_uri?: string;
+  }
+
+  export interface Outbound {
+    /**
+     * Set a phone number as the ani_override value to override caller id number on
+     * outbound calls.
+     */
+    ani_override?: string;
+
+    /**
+     * Specifies when we apply your ani_override setting. Only applies when
+     * ani_override is not blank.
+     */
+    ani_override_type?: 'always' | 'normal' | 'emergency';
+
+    /**
+     * Forces all SIP calls originated on this connection to be "parked" instead of
+     * "bridged" to the destination specified on the URI. Parked calls will return
+     * ringback to the caller and will await for a Call Control command to define which
+     * action will be taken next.
+     */
+    call_parking_enabled?: boolean | null;
+
+    /**
+     * When set, this will limit the total number of outbound calls to phone numbers
+     * associated with this connection.
+     */
+    channel_limit?: number;
+
+    /**
+     * Generate ringback tone through 183 session progress message with early media.
+     */
+    generate_ringback_tone?: boolean;
+
+    /**
+     * When set, ringback will not wait for indication before sending ringback tone to
+     * calling party.
+     */
+    instant_ringback_enabled?: boolean;
+
+    /**
+     * A 2-character country code specifying the country whose national dialing rules
+     * should be used. For example, if set to `US` then any US number can be dialed
+     * without preprending +1 to the number. When left blank, Telnyx will try US and GB
+     * dialing rules, in that order, by default.
+     */
+    localization?: string;
+
+    /**
+     * Identifies the associated outbound voice profile.
+     */
+    outbound_voice_profile_id?: string;
+
+    /**
+     * This setting only affects connections with Fax-type Outbound Voice Profiles. The
+     * setting dictates whether or not Telnyx sends a t.38 reinvite.<br/><br/> By
+     * default, Telnyx will send the re-invite. If set to `customer`, the caller is
+     * expected to send the t.38 reinvite.
+     */
+    t38_reinvite_source?:
+      | 'telnyx'
+      | 'customer'
+      | 'disabled'
+      | 'passthru'
+      | 'caller-passthru'
+      | 'callee-passthru';
+  }
 }
 
 export interface UacConnectionUpdateParams {
@@ -877,7 +2746,7 @@ export interface UacConnectionUpdateParams {
    * External SIP peer settings used by Telnyx when registering to your PBX and
    * routing outbound calls.
    */
-  external_uac_settings?: UacExternalSettings;
+  external_uac_settings?: UacConnectionUpdateParams.ExternalUacSettings;
 
   /**
    * Inbound settings that can be supplied when creating or updating a UAC
@@ -889,7 +2758,7 @@ export interface UacConnectionUpdateParams {
   /**
    * Internal Telnyx-side settings for a UAC connection.
    */
-  internal_uac_settings?: UacInternalSettings;
+  internal_uac_settings?: UacConnectionUpdateParams.InternalUacSettings;
 
   /**
    * The uuid of the push credential for Ios
@@ -928,7 +2797,7 @@ export interface UacConnectionUpdateParams {
    */
   onnet_t38_passthrough_enabled?: boolean;
 
-  outbound?: UacOutbound;
+  outbound?: UacConnectionUpdateParams.Outbound;
 
   /**
    * The password to be used as part of the credentials. Must be 8 to 128 characters
@@ -982,6 +2851,60 @@ export interface UacConnectionUpdateParams {
 }
 
 export namespace UacConnectionUpdateParams {
+  /**
+   * External SIP peer settings used by Telnyx when registering to your PBX and
+   * routing outbound calls.
+   */
+  export interface ExternalUacSettings {
+    /**
+     * The authentication username used in SIP digest authentication. If not set, the
+     * Username value will be used.
+     */
+    auth_username?: string | null;
+
+    /**
+     * The registration interval, in seconds, indicating how often the system refreshes
+     * the SIP registration with the external SIP peer.
+     */
+    expiration_sec?: number | null;
+
+    /**
+     * The user portion of the SIP From header used in outbound requests. This controls
+     * the caller identity presented to the external SIP peer.
+     */
+    from_user?: string | null;
+
+    /**
+     * An optional SIP proxy used to route outbound requests before reaching the
+     * external SIP peer.
+     */
+    outbound_proxy?: string | null;
+
+    /**
+     * The SIP password used for digest authentication with the external SIP peer.
+     */
+    password?: string;
+
+    /**
+     * The SIP proxy address of the external SIP peer used for registrations and
+     * outbound call routing.
+     */
+    proxy?: string;
+
+    /**
+     * The transport protocol used for SIP signaling when communicating with the
+     * external SIP peer. One of UDP, TLS, or TCP.
+     */
+    transport?: 'UDP' | 'TLS' | 'TCP' | null;
+
+    /**
+     * The SIP username used to authenticate with the external SIP peer for
+     * registrations and outbound calls. Must start with a letter or number and contain
+     * only letters, numbers, hyphens, and underscores.
+     */
+    username?: string;
+  }
+
   /**
    * Inbound settings that can be supplied when creating or updating a UAC
    * connection. The SIP subdomain fields returned in UAC connection responses are
@@ -1060,6 +2983,86 @@ export namespace UacConnectionUpdateParams {
      */
     timeout_2xx_secs?: number;
   }
+
+  /**
+   * Internal Telnyx-side settings for a UAC connection.
+   */
+  export interface InternalUacSettings {
+    /**
+     * The SIP URI that Telnyx will call when handling an inbound request from the
+     * external peer. Do not include a `sip:` prefix. The value must be in the format
+     * `userinfo@<subdomain.>sip.telnyx.com` or
+     * `userinfo@<subdomain.>sipdev.telnyx.com`; the userinfo portion may contain only
+     * letters, digits, hyphens, and underscores.
+     */
+    destination_uri?: string;
+  }
+
+  export interface Outbound {
+    /**
+     * Set a phone number as the ani_override value to override caller id number on
+     * outbound calls.
+     */
+    ani_override?: string;
+
+    /**
+     * Specifies when we apply your ani_override setting. Only applies when
+     * ani_override is not blank.
+     */
+    ani_override_type?: 'always' | 'normal' | 'emergency';
+
+    /**
+     * Forces all SIP calls originated on this connection to be "parked" instead of
+     * "bridged" to the destination specified on the URI. Parked calls will return
+     * ringback to the caller and will await for a Call Control command to define which
+     * action will be taken next.
+     */
+    call_parking_enabled?: boolean | null;
+
+    /**
+     * When set, this will limit the total number of outbound calls to phone numbers
+     * associated with this connection.
+     */
+    channel_limit?: number;
+
+    /**
+     * Generate ringback tone through 183 session progress message with early media.
+     */
+    generate_ringback_tone?: boolean;
+
+    /**
+     * When set, ringback will not wait for indication before sending ringback tone to
+     * calling party.
+     */
+    instant_ringback_enabled?: boolean;
+
+    /**
+     * A 2-character country code specifying the country whose national dialing rules
+     * should be used. For example, if set to `US` then any US number can be dialed
+     * without preprending +1 to the number. When left blank, Telnyx will try US and GB
+     * dialing rules, in that order, by default.
+     */
+    localization?: string;
+
+    /**
+     * Identifies the associated outbound voice profile.
+     */
+    outbound_voice_profile_id?: string;
+
+    /**
+     * This setting only affects connections with Fax-type Outbound Voice Profiles. The
+     * setting dictates whether or not Telnyx sends a t.38 reinvite.<br/><br/> By
+     * default, Telnyx will send the re-invite. If set to `customer`, the caller is
+     * expected to send the t.38 reinvite.
+     */
+    t38_reinvite_source?:
+      | 'telnyx'
+      | 'customer'
+      | 'disabled'
+      | 'passthru'
+      | 'caller-passthru'
+      | 'callee-passthru';
+  }
 }
 
 export interface UacConnectionListParams extends DefaultFlatPaginationParams {
@@ -1132,16 +3135,12 @@ UacConnections.Actions = Actions;
 
 export declare namespace UacConnections {
   export {
-    type UacConnection as UacConnection,
-    type UacExternalSettings as UacExternalSettings,
-    type UacInbound as UacInbound,
-    type UacInternalSettings as UacInternalSettings,
-    type UacOutbound as UacOutbound,
     type UacConnectionCreateResponse as UacConnectionCreateResponse,
     type UacConnectionRetrieveResponse as UacConnectionRetrieveResponse,
     type UacConnectionUpdateResponse as UacConnectionUpdateResponse,
+    type UacConnectionListResponse as UacConnectionListResponse,
     type UacConnectionDeleteResponse as UacConnectionDeleteResponse,
-    type UacConnectionsDefaultFlatPagination as UacConnectionsDefaultFlatPagination,
+    type UacConnectionListResponsesDefaultFlatPagination as UacConnectionListResponsesDefaultFlatPagination,
     type UacConnectionCreateParams as UacConnectionCreateParams,
     type UacConnectionUpdateParams as UacConnectionUpdateParams,
     type UacConnectionListParams as UacConnectionListParams,