tasmota-webserial-esptool 6.0.1 → 6.1.0

package/js/esptool.js

@@ -1,4 +1,4 @@
-'use strict';
+"use strict";
 
 let port;
 let reader;
@@ -7,36 +7,36 @@ let outputStream;
 let inputBuffer = [];
 
 const esp8266FlashSizes = {
-    "512KB": 0x00,
-    "256KB": 0x10,
-    "1MB": 0x20,
-    "2MB": 0x30,
-    "4MB": 0x40,
-    "2MB-c1": 0x50,
-    "4MB-c1": 0x60,
-    "8MB": 0x80,
-    "16MB": 0x90,
+  "512KB": 0x00,
+  "256KB": 0x10,
+  "1MB": 0x20,
+  "2MB": 0x30,
+  "4MB": 0x40,
+  "2MB-c1": 0x50,
+  "4MB-c1": 0x60,
+  "8MB": 0x80,
+  "16MB": 0x90,
 };
 
 const esp32FlashSizes = {
-    "1MB": 0x00,
-    "2MB": 0x10,
-    "4MB": 0x20,
-    "8MB": 0x30,
-    "16MB": 0x40
+  "1MB": 0x00,
+  "2MB": 0x10,
+  "4MB": 0x20,
+  "8MB": 0x30,
+  "16MB": 0x40,
 };
 
 const flashMode = {
-    'qio': 0,
-    'qout': 1,
-    'dio': 2,
-    'dout': 3
+  qio: 0,
+  qout: 1,
+  dio: 2,
+  dout: 3,
 };
 
 const flashFreq = {
-    '40m': 0,
-    '80m': 0xf
-}
+  "40m": 0,
+  "80m": 0xf,
+};
 
 // Defaults
 // Flash Frequency: 40m
@@ -46,15 +46,17 @@ const flashFreq = {
 const ESP_ROM_BAUD = 115200;
 const FLASH_WRITE_SIZE = 0x400;
 const STUBLOADER_FLASH_WRITE_SIZE = 0x4000;
-const FLASH_SECTOR_SIZE = 0x1000;  // Flash sector size, minimum unit of erase.
+const FLASH_SECTOR_SIZE = 0x1000; // Flash sector size, minimum unit of erase.
 
-const SYNC_PACKET = toByteArray("\x07\x07\x12 UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU");
+const SYNC_PACKET = toByteArray(
+  "\x07\x07\x12 UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU"
+);
 const CHIP_DETECT_MAGIC_REG_ADDR = 0x40001000;
 const ESP8266 = 0x8266;
 const ESP32 = 0x32;
 const ESP32S2 = 0x3252;
 const ESP32S3 = 0x3253;
-const ESP32C3 = 0x32C3;
+const ESP32C3 = 0x32c3;
 
 // Commands supported by ESP8266 ROM bootloader
 const ESP_FLASH_BEGIN = 0x02;
@@ -65,33 +67,32 @@ const ESP_MEM_END = 0x06;
 const ESP_MEM_DATA = 0x07;
 const ESP_SYNC = 0x08;
 const ESP_WRITE_REG = 0x09;
-const ESP_READ_REG = 0x0A;
+const ESP_READ_REG = 0x0a;
 
 // Some comands supported by ESP32 ROM bootloader (or -8266 w/ stub)
-const ESP_SPI_SET_PARAMS = 0x0B;
-const ESP_SPI_ATTACH = 0x0D;
-const ESP_READ_FLASH_SLOW  = 0x0E  // ROM only, much slower than the stub flash read
-const ESP_CHANGE_BAUDRATE = 0x0F;
-const ESP_FLASH_DEFL_BEGIN = 0x10
-const ESP_FLASH_DEFL_DATA  = 0x11
-const ESP_FLASH_DEFL_END   = 0x12
+const ESP_SPI_SET_PARAMS = 0x0b;
+const ESP_SPI_ATTACH = 0x0d;
+const ESP_READ_FLASH_SLOW = 0x0e; // ROM only, much slower than the stub flash read
+const ESP_CHANGE_BAUDRATE = 0x0f;
+const ESP_FLASH_DEFL_BEGIN = 0x10;
+const ESP_FLASH_DEFL_DATA = 0x11;
+const ESP_FLASH_DEFL_END = 0x12;
 const ESP_SPI_FLASH_MD5 = 0x13;
 
 // Commands supported by ESP32-S2/S3/C3/C6 ROM bootloader only
 const ESP_GET_SECURITY_INFO = 0x14;
 
 // Some commands supported by stub only
-const ESP_ERASE_FLASH = 0xD0;
-const ESP_ERASE_REGION = 0xD1;
-const ESP_READ_FLASH = 0xD2;
-const ESP_RUN_USER_CODE = 0xD3;
+const ESP_ERASE_FLASH = 0xd0;
+const ESP_ERASE_REGION = 0xd1;
+const ESP_READ_FLASH = 0xd2;
+const ESP_RUN_USER_CODE = 0xd3;
 
 // Response code(s) sent by ROM
 const ROM_INVALID_RECV_MSG = 0x05;
 
 // Initial state for the checksum routine
-const ESP_CHECKSUM_MAGIC = 0xEF;
-
+const ESP_CHECKSUM_MAGIC = 0xef;
 
 const UART_DATE_REG_ADDR = 0x60000078;
 
@@ -100,123 +101,122 @@ const ESP_RAM_BLOCK = 0x1800;
 
 // Timeouts
 const DEFAULT_TIMEOUT = 3000;
-const CHIP_ERASE_TIMEOUT = 120000;             // timeout for full chip erase in ms
-const MAX_TIMEOUT = CHIP_ERASE_TIMEOUT * 2;    // longest any command can run in ms
-const SYNC_TIMEOUT = 100;                      // timeout for syncing with bootloader in ms
-const ERASE_REGION_TIMEOUT_PER_MB = 30000;     // timeout (per megabyte) for erasing a region in ms
+const CHIP_ERASE_TIMEOUT = 120000; // timeout for full chip erase in ms
+const MAX_TIMEOUT = CHIP_ERASE_TIMEOUT * 2; // longest any command can run in ms
+const SYNC_TIMEOUT = 100; // timeout for syncing with bootloader in ms
+const ERASE_REGION_TIMEOUT_PER_MB = 30000; // timeout (per megabyte) for erasing a region in ms
 const MEM_END_ROM_TIMEOUT = 500;
 
-
 const supportedChips = {
-    "ESP8266": {
-      "chipId": ESP8266,
-      "chipName": "ESP8266EX",
-      "magicVal": [0xfff0c101],
-      "baseFuseAddr": 0x3FF00050,
-      "macFuseAddr": 0x3FF00050,
-      "stubFile": "esp8266",
-      "spiRegBase": 0x60000200,
-      "spiUsrOffs": 0x1c,
-      "spiUsr1Offs": 0x20,
-      "spiUsr2Offs": 0x24,
-      "spiMosiDlenOffs": null,
-      "spiMisoDlenOffs": null,
-      "spiW0Offs": 0x40,
-    },
-    "ESP32": {
-      "chipId": ESP32,
-      "chipName": "ESP32",
-      "magicVal": [0x00f01d83],
-      "baseFuseAddr": 0x3FF5A000,
-      "macFuseAddr": 0x3FF5A000,
-      "stubFile": "esp32",
-      "spiRegBase": 0x3ff42000,
-      "spiUsrOffs": 0x1c,
-      "spiUsr1Offs": 0x20,
-      "spiUsr2Offs": 0x24,
-      "spiMosiDlenOffs": 0x28,
-      "spiMisoDlenOffs": 0x2c,
-      "spiW0Offs": 0x80,
-    },
-    "ESP32S2": {
-      "chipId": ESP32S2,
-      "chipName": "ESP32-S2",
-      "magicVal": [0x000007c6],
-      "baseFuseAddr": 0x3f41A000,
-      "macFuseAddr": 0x3f41A044,
-      "stubFile": "esp32s2",
-      "spiRegBase": 0x3f402000,
-      "spiUsrOffs": 0x18,
-      "spiUsr1Offs": 0x1c,
-      "spiUsr2Offs": 0x20,
-      "spiMosiDlenOffs": 0x24,
-      "spiMisoDlenOffs": 0x28,
-      "spiW0Offs": 0x58,
-    },
-    "ESP32S3": {
-      "chipId": ESP32S3,
-      "chipName": "ESP32-S3",
-      "magicVal": [0x9],
-      "baseFuseAddr": 0x60007000,
-      "macFuseAddr": 0x60007044,
-      "stubFile": "esp32s3",
-      "spiRegBase": 0x60002000,
-      "spiUsrOffs": 0x18,
-      "spiUsr1Offs": 0x1c,
-      "spiUsr2Offs": 0x20,
-      "spiMosiDlenOffs": 0x24,
-      "spiMisoDlenOffs": 0x28,
-      "spiW0Offs": 0x58,
-    },
-    "ESP32C3": {
-      "chipId": ESP32C3,
-      "chipName": "ESP32-C3",
-      "magicVal": [0x6921506f, 0x1b31506f],
-      "baseFuseAddr": 0x60008800,
-      "macFuseAddr": 0x60008800 + 0x044,
-      "stubFile": "esp32c3",
-      "spiRegBase": 0x60002000,
-      "spiUsrOffs": 0x18,
-      "spiUsr1Offs": 0x1c,
-      "spiUsr2Offs": 0x20,
-      "spiMosiDlenOffs": 0x24,
-      "spiMisoDlenOffs": 0x28,
-      "spiW0Offs": 0x58,
-    },
-}
+  ESP8266: {
+    chipId: ESP8266,
+    chipName: "ESP8266EX",
+    magicVal: [0xfff0c101],
+    baseFuseAddr: 0x3ff00050,
+    macFuseAddr: 0x3ff00050,
+    stubFile: "esp8266",
+    spiRegBase: 0x60000200,
+    spiUsrOffs: 0x1c,
+    spiUsr1Offs: 0x20,
+    spiUsr2Offs: 0x24,
+    spiMosiDlenOffs: null,
+    spiMisoDlenOffs: null,
+    spiW0Offs: 0x40,
+  },
+  ESP32: {
+    chipId: ESP32,
+    chipName: "ESP32",
+    magicVal: [0x00f01d83],
+    baseFuseAddr: 0x3ff5a000,
+    macFuseAddr: 0x3ff5a000,
+    stubFile: "esp32",
+    spiRegBase: 0x3ff42000,
+    spiUsrOffs: 0x1c,
+    spiUsr1Offs: 0x20,
+    spiUsr2Offs: 0x24,
+    spiMosiDlenOffs: 0x28,
+    spiMisoDlenOffs: 0x2c,
+    spiW0Offs: 0x80,
+  },
+  ESP32S2: {
+    chipId: ESP32S2,
+    chipName: "ESP32-S2",
+    magicVal: [0x000007c6],
+    baseFuseAddr: 0x3f41a000,
+    macFuseAddr: 0x3f41a044,
+    stubFile: "esp32s2",
+    spiRegBase: 0x3f402000,
+    spiUsrOffs: 0x18,
+    spiUsr1Offs: 0x1c,
+    spiUsr2Offs: 0x20,
+    spiMosiDlenOffs: 0x24,
+    spiMisoDlenOffs: 0x28,
+    spiW0Offs: 0x58,
+  },
+  ESP32S3: {
+    chipId: ESP32S3,
+    chipName: "ESP32-S3",
+    magicVal: [0x9],
+    baseFuseAddr: 0x60007000,
+    macFuseAddr: 0x60007044,
+    stubFile: "esp32s3",
+    spiRegBase: 0x60002000,
+    spiUsrOffs: 0x18,
+    spiUsr1Offs: 0x1c,
+    spiUsr2Offs: 0x20,
+    spiMosiDlenOffs: 0x24,
+    spiMisoDlenOffs: 0x28,
+    spiW0Offs: 0x58,
+  },
+  ESP32C3: {
+    chipId: ESP32C3,
+    chipName: "ESP32-C3",
+    magicVal: [0x6921506f, 0x1b31506f],
+    baseFuseAddr: 0x60008800,
+    macFuseAddr: 0x60008800 + 0x044,
+    stubFile: "esp32c3",
+    spiRegBase: 0x60002000,
+    spiUsrOffs: 0x18,
+    spiUsr1Offs: 0x1c,
+    spiUsr2Offs: 0x20,
+    spiMosiDlenOffs: 0x24,
+    spiMisoDlenOffs: 0x28,
+    spiW0Offs: 0x58,
+  },
+};
 
 class EspLoader {
   constructor(params) {
     this._chipfamily = null;
-    this.readTimeout = 3000;  // Arbitrary number for now. This should be set more dynamically in the command() function
+    this.readTimeout = 3000; // Arbitrary number for now. This should be set more dynamically in the command() function
     this._efuses = new Array(4).fill(0);
     this._flashsize = 4 * 1024 * 1024;
     if (this.isFunction(params.updateProgress)) {
-      this.updateProgress = params.updateProgress
+      this.updateProgress = params.updateProgress;
     } else {
-      this.updateProgress = null
+      this.updateProgress = null;
     }
 
     if (this.isFunction(params.logMsg)) {
-      this.logMsg = params.logMsg
+      this.logMsg = params.logMsg;
     } else {
-      this.logMsg = console.log
+      this.logMsg = console.log;
     }
     this.debug = params.debug;
     if (this.isFunction(params.debugMsg)) {
-      this._debugMsg = params.debugMsg
+      this._debugMsg = params.debugMsg;
     } else {
-      this._debugMsg = this.logMsg()
+      this._debugMsg = this.logMsg();
     }
     this.IS_STUB = false;
     this.syncStubDetected = false;
   }
 
   isFunction(functionObj) {
-    return functionObj && {}.toString.call(functionObj) === '[object Function]';
+    return functionObj && {}.toString.call(functionObj) === "[object Function]";
   }
 
-  toHex(value, size=2) {
+  toHex(value, size = 2) {
     return "0x" + value.toString(16).toUpperCase().padStart(size, "0");
   }
 
@@ -232,19 +232,19 @@ class EspLoader {
    * 0xdb is replaced with 0xdb 0xdd and 0xc0 is replaced with 0xdb 0xdc
    */
   slipEncode(buffer) {
-    let encoded = [0xC0];
+    let encoded = [0xc0];
     for (let byte of buffer) {
-      if (byte == 0xDB) {
-        encoded = encoded.concat([0xDB, 0xDD]);
-      } else if (byte == 0xC0) {
-        encoded = encoded.concat([0xDB, 0xDC]);
+      if (byte == 0xdb) {
+        encoded = encoded.concat([0xdb, 0xdd]);
+      } else if (byte == 0xc0) {
+        encoded = encoded.concat([0xdb, 0xdc]);
       } else {
         encoded.push(byte);
       }
     }
-    encoded.push(0xC0);
+    encoded.push(0xc0);
     return encoded;
-  };
+  }
 
   /**
    * @name macAddr
@@ -259,40 +259,40 @@ class EspLoader {
     let oui;
     if (this._chipfamily == ESP8266) {
       if (mac3 != 0) {
-        oui = [(mac3 >> 16) & 0xFF, (mac3 >> 8) & 0xFF, mac3 & 0xFF];
-      } else if (((mac1 >> 16) & 0xFF) == 0) {
-        oui = [0x18, 0xFE, 0x34];
-      } else if (((mac1 >> 16) & 0xFF) == 1) {
-        oui = [0xAC, 0xD0, 0x74];
+        oui = [(mac3 >> 16) & 0xff, (mac3 >> 8) & 0xff, mac3 & 0xff];
+      } else if (((mac1 >> 16) & 0xff) == 0) {
+        oui = [0x18, 0xfe, 0x34];
+      } else if (((mac1 >> 16) & 0xff) == 1) {
+        oui = [0xac, 0xd0, 0x74];
       } else {
-        throw("Couldnt determine OUI");
+        throw "Couldnt determine OUI";
       }
 
       macAddr[0] = oui[0];
       macAddr[1] = oui[1];
       macAddr[2] = oui[2];
-      macAddr[3] = (mac1 >> 8) & 0xFF;
-      macAddr[4] = mac1 & 0xFF;
-      macAddr[5] = (mac0 >> 24) & 0xFF;
-  } else if (this._chipfamily == ESP32) {
-    macAddr[0] = (mac2 >> 8) & 0xff;
-    macAddr[1] = mac2 & 0xff;
-    macAddr[2] = (mac1 >> 24) & 0xff;
-    macAddr[3] = (mac1 >> 16) & 0xff;
-    macAddr[4] = (mac1 >> 8) & 0xff;
-    macAddr[5] = mac1 & 0xff;
-  } else if ([ESP32S2, ESP32S3, ESP32C3].includes(this._chipfamily)) {
-    macAddr[0] = (mac1 >> 8) & 0xff;
-    macAddr[1] = mac1 & 0xff;
-    macAddr[2] = (mac0 >> 24) & 0xff;
-    macAddr[3] = (mac0 >> 16) & 0xff;
-    macAddr[4] = (mac0 >> 8) & 0xff;
-    macAddr[5] = mac0 & 0xff;
+      macAddr[3] = (mac1 >> 8) & 0xff;
+      macAddr[4] = mac1 & 0xff;
+      macAddr[5] = (mac0 >> 24) & 0xff;
+    } else if (this._chipfamily == ESP32) {
+      macAddr[0] = (mac2 >> 8) & 0xff;
+      macAddr[1] = mac2 & 0xff;
+      macAddr[2] = (mac1 >> 24) & 0xff;
+      macAddr[3] = (mac1 >> 16) & 0xff;
+      macAddr[4] = (mac1 >> 8) & 0xff;
+      macAddr[5] = mac1 & 0xff;
+    } else if ([ESP32S2, ESP32S3, ESP32C3].includes(this._chipfamily)) {
+      macAddr[0] = (mac1 >> 8) & 0xff;
+      macAddr[1] = mac1 & 0xff;
+      macAddr[2] = (mac0 >> 24) & 0xff;
+      macAddr[3] = (mac0 >> 16) & 0xff;
+      macAddr[4] = (mac0 >> 8) & 0xff;
+      macAddr[5] = mac0 & 0xff;
     } else {
-      throw("Unknown chip family")
+      throw "Unknown chip family";
     }
     return macAddr;
-  };
+  }
 
   debugMsg(debugLevel, ...values) {
     if (this.debug) {
@@ -310,7 +310,7 @@ class EspLoader {
     for (let i = 0; i < 4; i++) {
       this._efuses[i] = await this.readRegister(chipInfo.macFuseAddr + 4 * i);
     }
-  };
+  }
 
   /**
    * @name readRegister
@@ -324,26 +324,34 @@ class EspLoader {
     await this.command(ESP_READ_REG, packet);
     let [val, data] = await this.getResponse(ESP_READ_REG);
     return val;
-  };
+  }
 
   /**
    * @name writeRegister
    * Write to a register within the ESP chip RAM, returns a 4-element list
    */
-  async writeRegister(addr, value, mask=0xFFFFFFFF, delayUs=0, delayAfterUs=0) {
+  async writeRegister(
+    addr,
+    value,
+    mask = 0xffffffff,
+    delayUs = 0,
+    delayAfterUs = 0
+  ) {
     if (this.debug) {
       this.debugMsg(1, "Writing to Register " + this.toHex(addr, 8));
     }
     let packet = struct.pack("<IIII", addr, value, mask, delayUs);
     if (delayAfterUs > 0) {
-      packet = packet.concat(struct.pack('<IIII', UART_DATE_REG_ADDR, 0, 0, delayAfterUs))
+      packet = packet.concat(
+        struct.pack("<IIII", UART_DATE_REG_ADDR, 0, 0, delayAfterUs)
+      );
     }
     let returnVal = await this.checkCommand(ESP_WRITE_REG, packet);
     return returnVal;
-  };
+  }
 
   sleep(ms) {
-    return new Promise(resolve => setTimeout(resolve, ms));
+    return new Promise((resolve) => setTimeout(resolve, ms));
   }
 
   /**
@@ -352,10 +360,10 @@ class EspLoader {
    */
   async chipType() {
     if (this._chipfamily === null) {
-      this._chipfamily = await this.detectChip()
+      this._chipfamily = await this.detectChip();
     }
     return this._chipfamily;
-  };
+  }
 
   getChipInfo(chipId) {
     // Loop through supported chips and return the data for that chip
@@ -365,7 +373,7 @@ class EspLoader {
       }
     }
 
-    throw("Chip Id is not Supported")
+    throw "Chip Id is not Supported";
   }
 
   async detectChip() {
@@ -374,10 +382,10 @@ class EspLoader {
     // Loop through magicValues and if the value matches, then the key is the chip ID
     for (const [key, value] of Object.entries(supportedChips)) {
       if (value["magicVal"].includes(chipMagicValue)) {
-        return value["chipId"]
+        return value["chipId"];
       }
     }
-    throw("Unable to detect Chip");
+    throw "Unable to detect Chip";
   }
 
   /**
@@ -395,7 +403,7 @@ class EspLoader {
       }
     }
     return chipInfo.chipName;
-  };
+  }
 
   /**
    * @name checkCommand
@@ -403,27 +411,29 @@ class EspLoader {
    * return a tuple with the value and data.
    * See the ESP Serial Protocol for more details on what value/data are
    */
-  async checkCommand(opcode, buffer, checksum=0, timeout=DEFAULT_TIMEOUT) {
+  async checkCommand(opcode, buffer, checksum = 0, timeout = DEFAULT_TIMEOUT) {
     timeout = Math.min(timeout, MAX_TIMEOUT);
     await this.command(opcode, buffer, checksum);
     let [value, data] = await this.getResponse(opcode, timeout);
     let statusLen;
     if (data !== null) {
       if (this.IS_STUB) {
-          statusLen = 2;
+        statusLen = 2;
       } else if (this._chipfamily == ESP8266) {
-          statusLen = 2;
-      } else if ([ESP32, ESP32S2, ESP32S3, ESP32C3].includes(this._chipfamily)) {
-          statusLen = 4;
+        statusLen = 2;
+      } else if (
+        [ESP32, ESP32S2, ESP32S3, ESP32C3].includes(this._chipfamily)
+      ) {
+        statusLen = 4;
       } else {
-          if ([2, 4].includes(data.length)) {
-              statusLen = data.length;
-          }
+        if ([2, 4].includes(data.length)) {
+          statusLen = data.length;
+        }
       }
     }
 
     if (data === null || data.length < statusLen) {
-      throw("Didn't get enough status bytes");
+      throw "Didn't get enough status bytes";
     }
     let status = data.slice(-statusLen, data.length);
     data = data.slice(0, -statusLen);
@@ -434,9 +444,9 @@ class EspLoader {
     }
     if (status[0] == 1) {
       if (status[1] == ROM_INVALID_RECV_MSG) {
-        throw("Invalid (unsupported) command " + this.toHex(opcode));
+        throw "Invalid (unsupported) command " + this.toHex(opcode);
       } else {
-        throw("Command failure error code " + this.toHex(status[1]));
+        throw "Command failure error code " + this.toHex(status[1]);
       }
     }
 
@@ -444,33 +454,41 @@ class EspLoader {
       return data;
     }
     return value;
-  };
+  }
 
   /**
    * @name timeoutPerMb
    * Scales timeouts which are size-specific
    */
   timeoutPerMb(secondsPerMb, sizeBytes) {
-      let result = Math.floor(secondsPerMb * (sizeBytes / 0x1e6));
-      if (result < DEFAULT_TIMEOUT) {
-        return DEFAULT_TIMEOUT;
-      }
-      return result;
-  };
+    let result = Math.floor(secondsPerMb * (sizeBytes / 0x1e6));
+    if (result < DEFAULT_TIMEOUT) {
+      return DEFAULT_TIMEOUT;
+    }
+    return result;
+  }
 
   /**
    * @name command
    * Send a slip-encoded, checksummed command over the UART,
    * does not check response
    */
-  async command(opcode, buffer, checksum=0) {
+  async command(opcode, buffer, checksum = 0) {
     //inputBuffer = []; // Reset input buffer
     let packet = struct.pack("<BBHI", 0x00, opcode, buffer.length, checksum);
     packet = packet.concat(buffer);
     packet = this.slipEncode(packet);
-    this.debugMsg(2, "Writing " + packet.length + " byte" + (packet.length == 1 ? "" : "s") + ":", packet);
+    this.debugMsg(
+      2,
+      "Writing " +
+        packet.length +
+        " byte" +
+        (packet.length == 1 ? "" : "s") +
+        ":",
+      packet
+    );
     await this.writeToStream(packet);
-  };
+  }
 
   /**
    * @name connect
@@ -485,19 +503,19 @@ class EspLoader {
     try {
       // support chrome < 86
       await port.open({ baudrate: ESP_ROM_BAUD, baudRate: ESP_ROM_BAUD });
-    } catch(e) {
+    } catch (e) {
       port = null;
       throw e;
     }
 
     const signals = await port.getSignals();
 
-    this.logMsg("Connected successfully.")
+    this.logMsg("Connected successfully.");
 
-    this.logMsg("Try to reset.")
+    this.logMsg("Try to reset.");
     await port.setSignals({ dataTerminalReady: false, requestToSend: true });
     await port.setSignals({ dataTerminalReady: true, requestToSend: false });
-    await new Promise(resolve => setTimeout(resolve, 1000));
+    await new Promise((resolve) => setTimeout(resolve, 1000));
 
     outputStream = port.writable;
     inputStream = port.readable;
@@ -537,7 +555,7 @@ class EspLoader {
   }
 
   hexFormatter(bytes) {
-    return "[" + bytes.map(value => this.toHex(value)).join(", ") + "]"
+    return "[" + bytes.map((value) => this.toHex(value)).join(", ") + "]";
   }
 
   /**
@@ -552,57 +570,86 @@ class EspLoader {
     let partialPacket = null;
     let inEscape = false;
     let readBytes = [];
-    this.debugMsg(2, "Read Timeout", this.readTimeout)
+    this.debugMsg(2, "Read Timeout", this.readTimeout);
     while (true) {
-        let stamp = Date.now();
-        readBytes = [];
-        while (Date.now() - stamp < this.readTimeout) {
-            if (inputBuffer.length > 0) {
-              readBytes.push(inputBuffer.shift());
-              break;
-            } else {
-                await this.sleep(10);
-            }
-        }
-        if (readBytes.length == 0) {
-            let waitingFor = partialPacket === null ? "header" : "content";
-            this.debugMsg(1, "Timed out waiting for packet " + waitingFor);
-            console.error("Timed out waiting for packet " + waitingFor)
-            throw new SlipReadError("Timed out waiting for packet " + waitingFor);
+      let stamp = Date.now();
+      readBytes = [];
+      while (Date.now() - stamp < this.readTimeout) {
+        if (inputBuffer.length > 0) {
+          readBytes.push(inputBuffer.shift());
+          break;
+        } else {
+          await this.sleep(10);
         }
-        this.debugMsg(2, "Read " + readBytes.length + " bytes: " + this.hexFormatter(readBytes));
-        for (let b of readBytes) {
-            if (partialPacket === null) {  // waiting for packet header
-                if (b == 0xc0) {
-                    partialPacket = [];
-                } else {
-                    this.debugMsg(1, "Read invalid data: " + this.hexFormatter(readBytes));
-                    this.debugMsg(1, "Remaining data in serial buffer: " + this.hexFormatter(inputBuffer));
-                    throw new SlipReadError('Invalid head of packet (' + this.toHex(b) + ')');
-                }
-            } else if (inEscape) {  // part-way through escape sequence
-                inEscape = false;
-                if (b == 0xdc) {
-                    partialPacket.push(0xc0);
-                } else if (b == 0xdd) {
-                    partialPacket.push(0xdb);
-                } else {
-                    this.debugMsg(1, "Read invalid data: " + this.hexFormatter(readBytes));
-                    this.debugMsg(1, "Remaining data in serial buffer: " + this.hexFormatter(inputBuffer));
-                    throw new SlipReadError('Invalid SLIP escape (0xdb, ' + this.toHex(b) + ')');
-                }
-            } else if (b == 0xdb) {  // start of escape sequence
-                inEscape = true;
-            } else if (b == 0xc0) {  // end of packet
-                this.debugMsg(2, "Received full packet: " + this.hexFormatter(partialPacket))
-                return partialPacket;
-                partialPacket = null;
-            } else {  // normal byte in packet
-                partialPacket.push(b);
-            }
+      }
+      if (readBytes.length == 0) {
+        let waitingFor = partialPacket === null ? "header" : "content";
+        this.debugMsg(1, "Timed out waiting for packet " + waitingFor);
+        console.error("Timed out waiting for packet " + waitingFor);
+        throw new SlipReadError("Timed out waiting for packet " + waitingFor);
+      }
+      this.debugMsg(
+        2,
+        "Read " + readBytes.length + " bytes: " + this.hexFormatter(readBytes)
+      );
+      for (let b of readBytes) {
+        if (partialPacket === null) {
+          // waiting for packet header
+          if (b == 0xc0) {
+            partialPacket = [];
+          } else {
+            this.debugMsg(
+              1,
+              "Read invalid data: " + this.hexFormatter(readBytes)
+            );
+            this.debugMsg(
+              1,
+              "Remaining data in serial buffer: " +
+                this.hexFormatter(inputBuffer)
+            );
+            throw new SlipReadError(
+              "Invalid head of packet (" + this.toHex(b) + ")"
+            );
+          }
+        } else if (inEscape) {
+          // part-way through escape sequence
+          inEscape = false;
+          if (b == 0xdc) {
+            partialPacket.push(0xc0);
+          } else if (b == 0xdd) {
+            partialPacket.push(0xdb);
+          } else {
+            this.debugMsg(
+              1,
+              "Read invalid data: " + this.hexFormatter(readBytes)
+            );
+            this.debugMsg(
+              1,
+              "Remaining data in serial buffer: " +
+                this.hexFormatter(inputBuffer)
+            );
+            throw new SlipReadError(
+              "Invalid SLIP escape (0xdb, " + this.toHex(b) + ")"
+            );
+          }
+        } else if (b == 0xdb) {
+          // start of escape sequence
+          inEscape = true;
+        } else if (b == 0xc0) {
+          // end of packet
+          this.debugMsg(
+            2,
+            "Received full packet: " + this.hexFormatter(partialPacket)
+          );
+          return partialPacket;
+          partialPacket = null;
+        } else {
+          // normal byte in packet
+          partialPacket.push(b);
         }
       }
-    return '';
+    }
+    return "";
   }
 
   /**
@@ -611,69 +658,71 @@ class EspLoader {
    * out the value/data and returns as a tuple of (value, data) where
    * each is a list of bytes
    */
-  async getResponse(opcode, timeout=DEFAULT_TIMEOUT) {
+  async getResponse(opcode, timeout = DEFAULT_TIMEOUT) {
     this.readTimeout = timeout;
     let packet;
     let packetLength = 0;
     let resp, opRet, lenRet, val, data;
     for (let i = 0; i < 100; i++) {
-        try {
-          packet = await this.readPacket();
-        } catch(e) {
-          this.debugMsg(1, "Timed out after " + this.readTimeout + " milliseconds");
-          return [null, null];
-        }
+      try {
+        packet = await this.readPacket();
+      } catch (e) {
+        this.debugMsg(
+          1,
+          "Timed out after " + this.readTimeout + " milliseconds"
+        );
+        return [null, null];
+      }
 
-        if (packet.length < 8) {
-          continue;
-        }
+      if (packet.length < 8) {
+        continue;
+      }
 
-        [resp, opRet, lenRet, val] = struct.unpack('<BBHI', packet.slice(0, 8));
-        if (resp != 1) {
-          continue;
-        }
-        data = packet.slice(8);
-        if (opcode == null || opRet == opcode) {
-            return [val, data];
-        }
-        if (data[0] != 0 && data[1] == ROM_INVALID_RECV_MSG) {
-          inputBuffer = [];
-          throw("Invalid (unsupported) command " + this.toHex(opcode));
-        }
+      [resp, opRet, lenRet, val] = struct.unpack("<BBHI", packet.slice(0, 8));
+      if (resp != 1) {
+        continue;
+      }
+      data = packet.slice(8);
+      if (opcode == null || opRet == opcode) {
+        return [val, data];
+      }
+      if (data[0] != 0 && data[1] == ROM_INVALID_RECV_MSG) {
+        inputBuffer = [];
+        throw "Invalid (unsupported) command " + this.toHex(opcode);
+      }
     }
-    throw("Response doesn't match request");
-  };
+    throw "Response doesn't match request";
+  }
 
-/**
+  /**
    * @name read
    * Read response data and decodes the slip packet.
    * Keeps reading until we hit the timeout or get
    * a packet closing byte
    */
-  async readBuffer(timeout=DEFAULT_TIMEOUT) {
+  async readBuffer(timeout = DEFAULT_TIMEOUT) {
     this.readTimeout = timeout;
     let packet;
     try {
       packet = await this.readPacket();
-    } catch(e) {
+    } catch (e) {
       this.debugMsg(1, "Timed out after " + this.readTimeout + " milliseconds");
       return null;
     }
 
     return packet;
-  };
-
+  }
 
   /**
    * @name checksum
    * Calculate checksum of a blob, as it is defined by the ROM
    */
-  checksum(data, state=ESP_CHECKSUM_MAGIC) {
+  checksum(data, state = ESP_CHECKSUM_MAGIC) {
     for (let b of data) {
       state ^= b;
     }
     return state;
-  };
+  }
 
   setPortBaudRate(baud) {
     if (this.getChromeVersion() < 86) {
@@ -705,10 +754,14 @@ class EspLoader {
         //inputBuffer = [];
         this.logMsg("Changed baud rate to " + baud);
       } catch (e) {
-        throw("Unable to change the baud rate, please try setting the connection speed from " + baud + " to 115200 and reconnecting.");
+        throw (
+          "Unable to change the baud rate, please try setting the connection speed from " +
+          baud +
+          " to 115200 and reconnecting."
+        );
       }
     }
-  };
+  }
 
   /**
    * @name sync
@@ -716,20 +769,20 @@ class EspLoader {
    * ESP ROM bootloader, we will retry a few times
    */
   async sync() {
-    this.logMsg("Performing sync...")
+    this.logMsg("Performing sync...");
     for (let i = 0; i < 5; i++) {
-      inputBuffer = []
+      inputBuffer = [];
       let response = await this._sync();
       if (response) {
         await this.sleep(100);
-        this.logMsg("Successfully synced.")
+        this.logMsg("Successfully synced.");
         return true;
       }
       await this.sleep(100);
     }
 
-    throw("Couldn't sync to ESP. Try resetting.");
-  };
+    throw "Couldn't sync to ESP. Try resetting.";
+  }
 
   /**
    * @name _sync
@@ -739,10 +792,10 @@ class EspLoader {
   async _sync() {
     await this.command(ESP_SYNC, SYNC_PACKET);
     let [val, data] = await this.getResponse(ESP_SYNC, SYNC_TIMEOUT);
-    this.syncStubDetected = (val === 0 ? 1 : 0);
+    this.syncStubDetected = val === 0 ? 1 : 0;
     for (let i = 0; i < 8; i++) {
       let [val, data] = await this.getResponse(ESP_SYNC, SYNC_TIMEOUT);
-      this.syncStubDetected &= (val === 0 ? 1 : 0);
+      this.syncStubDetected &= val === 0 ? 1 : 0;
       if (data === null) {
         continue;
       }
@@ -751,15 +804,15 @@ class EspLoader {
       }
     }
     return false;
-  };
+  }
 
   /**
    * @name getFlashWriteSize
    * Get the Flash write size based on the chip
    */
   getFlashWriteSize() {
-      return FLASH_WRITE_SIZE;
-  };
+    return FLASH_WRITE_SIZE;
+  }
 
   /**
    * @name flashData
@@ -768,7 +821,7 @@ class EspLoader {
    *   verify memory. ESP8266 does not have checksum memory verification in
    *   ROM
    */
-  async flashData(binaryData, offset=0, part=0) {
+  async flashData(binaryData, offset = 0, part = 0) {
     let filesize = binaryData.byteLength;
     this.logMsg("\nWriting data with filesize: " + filesize);
     let blocks = await this.flashBegin(filesize, offset);
@@ -781,7 +834,7 @@ class EspLoader {
     let flashWriteSize = this.getFlashWriteSize();
 
     while (filesize - position > 0) {
-      let percentage = Math.floor(100 * (seq + 1) / blocks);
+      let percentage = Math.floor((100 * (seq + 1)) / blocks);
       /*this.logMsg(
           "Writing at " + this.toHex(address + seq * flashWriteSize, 8) + "... (" + percentage + " %)"
       );*/
@@ -789,19 +842,27 @@ class EspLoader {
         this.updateProgress(part, percentage);
       }
       if (filesize - position >= flashWriteSize) {
-        block = Array.from(new Uint8Array(binaryData, position, flashWriteSize));
+        block = Array.from(
+          new Uint8Array(binaryData, position, flashWriteSize)
+        );
       } else {
         // Pad the last block
-        block = Array.from(new Uint8Array(binaryData, position, filesize - position));
-        block = block.concat(new Array(flashWriteSize - block.length).fill(0xFF));
+        block = Array.from(
+          new Uint8Array(binaryData, position, filesize - position)
+        );
+        block = block.concat(
+          new Array(flashWriteSize - block.length).fill(0xff)
+        );
       }
       await this.flashBlock(block, seq);
       seq += 1;
       written += block.length;
       position += flashWriteSize;
     }
-    this.logMsg("Took " + (Date.now() - stamp) + "ms to write " + filesize + " bytes");
-  };
+    this.logMsg(
+      "Took " + (Date.now() - stamp) + "ms to write " + filesize + " bytes"
+    );
+  }
 
   /**
    * @name flashDeflBegin
@@ -811,31 +872,34 @@ class EspLoader {
   async flashDeflBegin(size, compsize, offset) {
     let params;
     let flashWriteSize = this.getFlashWriteSize();
-    let numBlocks = Math.floor((compsize + flashWriteSize - 1) / flashWriteSize);
+    let numBlocks = Math.floor(
+      (compsize + flashWriteSize - 1) / flashWriteSize
+    );
     let eraseBlocks = Math.floor((size + flashWriteSize - 1) / flashWriteSize);
 
-    let stamp = Date.now()
+    let stamp = Date.now();
     let writeSize, timeout;
     if (this.IS_STUB) {
-        writeSize = size  // stub expects number of bytes here, manages erasing internally
-        timeout = DEFAULT_TIMEOUT
+      writeSize = size; // stub expects number of bytes here, manages erasing internally
+      timeout = DEFAULT_TIMEOUT;
     } else {
-        writeSize = eraseBlocks * self.FLASH_WRITE_SIZE  // ROM expects rounded up to erase block size
-        timeout = this.timeoutPerMb(ERASE_REGION_TIMEOUT_PER_MB, writeSize);
+      writeSize = eraseBlocks * self.FLASH_WRITE_SIZE; // ROM expects rounded up to erase block size
+      timeout = this.timeoutPerMb(ERASE_REGION_TIMEOUT_PER_MB, writeSize);
     }
-    this.logMsg("Compressed " + size + " bytes to " + compsize + "...")
-    params = struct.pack(
-        "<IIII", writeSize, numBlocks, flashWriteSize, offset
-    );
-    if ([ESP32S2, ESP32S3, ESP32C3].includes(this._chipfamily) && !this.IS_STUB) {
-        params = params.concat(struct.pack("<I", 0));
+    this.logMsg("Compressed " + size + " bytes to " + compsize + "...");
+    params = struct.pack("<IIII", writeSize, numBlocks, flashWriteSize, offset);
+    if (
+      [ESP32S2, ESP32S3, ESP32C3].includes(this._chipfamily) &&
+      !this.IS_STUB
+    ) {
+      params = params.concat(struct.pack("<I", 0));
     }
 
     await this.checkCommand(ESP_FLASH_DEFL_BEGIN, params, 0, timeout);
 
     if (size != 0 && !this.IS_STUB) {
-        // (stub erases as it writes, but ROM loaders erase on begin)
-        this.logMsg("Took " + (Date.now() - stamp) + "ms to erase flash block");
+      // (stub erases as it writes, but ROM loaders erase on begin)
+      this.logMsg("Took " + (Date.now() - stamp) + "ms to erase flash block");
     }
     return numBlocks;
   }
@@ -844,49 +908,55 @@ class EspLoader {
    * @name flashDeflBlock
    * Write block to flash, send compressed
    */
-  async flashDeflBlock(data, seq, timeout=DEFAULT_TIMEOUT) {
+  async flashDeflBlock(data, seq, timeout = DEFAULT_TIMEOUT) {
     await this.checkCommand(
       ESP_FLASH_DEFL_DATA,
       struct.pack("<IIII", data.length, seq, 0, 0).concat(data),
       this.checksum(data),
-      timeout,
+      timeout
     );
-  };
+  }
 
   /**
    * @name flashDeflFinish
    * Write block to flash, send compressed
    */
-  async flashDeflFinish(reboot=false) {
+  async flashDeflFinish(reboot = false) {
     if (!reboot && !this.IS_STUB) {
       // skip sending flash_finish to ROM loader, as this
       // exits the bootloader. Stub doesn't do this.
       return;
     }
-    let pkt = struct.pack('<I', reboot ? 0 : 1);
+    let pkt = struct.pack("<I", reboot ? 0 : 1);
     await this.checkCommand(ESP_FLASH_DEFL_END, pkt);
-  };
+  }
 
   /**
    * @name flashBegin
    * Prepare for flashing by attaching SPI chip and erasing the
    *   number of blocks requred.
    */
-  async flashBegin(size=0, offset=0, encrypted=false) {
+  async flashBegin(size = 0, offset = 0, encrypted = false) {
     let buffer;
     let flashWriteSize = this.getFlashWriteSize();
     if (!this.IS_STUB) {
-        if ([ESP32, ESP32S2, ESP32S3, ESP32C3].includes(this._chipfamily)) {
-          await this.checkCommand(ESP_SPI_ATTACH, new Array(8).fill(0));
-        }
+      if ([ESP32, ESP32S2, ESP32S3, ESP32C3].includes(this._chipfamily)) {
+        await this.checkCommand(ESP_SPI_ATTACH, new Array(8).fill(0));
+      }
     }
     //let flashId = await this.flashId();
 
     if (this._chipfamily == ESP32) {
       // We are hardcoded for 4MB flash on ESP32
       buffer = struct.pack(
-          "<IIIIII", 0, this._flashsize, 0x10000, 4096, 256, 0xFFFF
-      )
+        "<IIIIII",
+        0,
+        this._flashsize,
+        0x10000,
+        4096,
+        256,
+        0xffff
+      );
       await this.checkCommand(ESP_SPI_SET_PARAMS, buffer);
     }
     let numBlocks = Math.floor((size + flashWriteSize - 1) / flashWriteSize);
@@ -900,41 +970,51 @@ class EspLoader {
     }
 
     let stamp = Date.now();
-    buffer = struct.pack(
-        "<IIII", eraseSize, numBlocks, flashWriteSize, offset
-    );
-    if ([ESP32S2, ESP32S3, ESP32C3].includes(this._chipfamily) && !this.IS_STUB) {
-      buffer = buffer.concat(struct.pack(
-        "<I", encrypted ? 1 : 0
-      ));
+    buffer = struct.pack("<IIII", eraseSize, numBlocks, flashWriteSize, offset);
+    if (
+      [ESP32S2, ESP32S3, ESP32C3].includes(this._chipfamily) &&
+      !this.IS_STUB
+    ) {
+      buffer = buffer.concat(struct.pack("<I", encrypted ? 1 : 0));
     }
     this.logMsg(
-        "Erase size " + eraseSize + ", blocks " + numBlocks + ", block size " + flashWriteSize + ", offset " + this.toHex(offset, 4) + ", encrypted " + (encrypted ? "yes" : "no")
+      "Erase size " +
+        eraseSize +
+        ", blocks " +
+        numBlocks +
+        ", block size " +
+        flashWriteSize +
+        ", offset " +
+        this.toHex(offset, 4) +
+        ", encrypted " +
+        (encrypted ? "yes" : "no")
     );
     await this.checkCommand(ESP_FLASH_BEGIN, buffer, 0, timeout);
     if (size != 0 && !this.IS_STUB) {
-      this.logMsg("Took " + (Date.now() - stamp) + "ms to erase " + numBlocks + " bytes");
+      this.logMsg(
+        "Took " + (Date.now() - stamp) + "ms to erase " + numBlocks + " bytes"
+      );
     }
     return numBlocks;
-  };
+  }
 
   /**
    * @name flashBlock
    * Send one block of data to program into SPI Flash memory
    */
-   async flashBlock(data, seq, timeout=DEFAULT_TIMEOUT) {
+  async flashBlock(data, seq, timeout = DEFAULT_TIMEOUT) {
     await this.checkCommand(
       ESP_FLASH_DATA,
       struct.pack("<IIII", data.length, seq, 0, 0).concat(data),
       this.checksum(data),
-      timeout,
+      timeout
     );
-  };
+  }
 
   async flashFinish() {
-    let buffer = struct.pack('<I', 1);
+    let buffer = struct.pack("<I", 1);
     await this.checkCommand(ESP_FLASH_END, buffer);
-  };
+  }
 
   /**
    * @name runSpiflashCommand
@@ -946,140 +1026,153 @@ class EspLoader {
    *    After writing command byte, writes 'data' to MOSI and then
    *    reads back 'read_bits' of reply on MISO. Result is a number.
    */
-  async runSpiflashCommand(spiflashCommand, data=[], readBits=0, addr=null, addrLen=0, dummyLen=0) {
-        let chipType = await this.chipType();
-        let chipInfo = this.getChipInfo(chipType);
-
-        // SPI_USR register flags
-        const SPI_USR_COMMAND = (1 << 31)
-        const SPI_USR_ADDR    = (1 << 30)
-        const SPI_USR_DUMMY   = (1 << 29)
-        const SPI_USR_MISO    = (1 << 28)
-        const SPI_USR_MOSI    = (1 << 27)
-
-        // SPI registers, base address differs ESP32* vs 8266
-        const base = chipInfo.spiRegBase
-        const SPI_CMD_REG       = base + 0x00
-        const SPI_ADDR_REG      = base + 0x04
-        const SPI_USR_REG       = base + chipInfo.spiUsrOffs
-        const SPI_USR1_REG      = base + chipInfo.spiUsr1Offs
-        const SPI_USR2_REG      = base + chipInfo.spiUsr2Offs
-        const SPI_W0_REG        = base + chipInfo.spiW0Offs
-
-        // shift values
-        const SPI_USR2_COMMAND_LEN_SHIFT = 28
-        const SPI_USR_ADDR_LEN_SHIFT = 26
-
-        // SPI peripheral "command" bitmasks for SPI_CMD_REG
-        const SPI_CMD_USR  = (1 << 18);
-
-        let setDataLengths;
-        let flags;
-        //following two registers are ESP32 and later chips only
-        if (chipInfo.spiMosiDlenOffs != null) {
-            // ESP32 and later chips have a more sophisticated way to set up "user" commands
-            setDataLengths = async function(mosi_bits, miso_bits) {
-                const SPI_MOSI_DLEN_REG = base + chipInfo.spiMosiDlenOffs;
-                const SPI_MISO_DLEN_REG = base + chipInfo.spiMisoDlenOffs;
-                if (mosi_bits > 0) {
-                    await this.writeRegister(SPI_MOSI_DLEN_REG, mosi_bits - 1);
-                }
-                if (miso_bits > 0) {
-                    await this.writeRegister(SPI_MISO_DLEN_REG, miso_bits - 1);
-                }
-                flags = 0;
-                if (dummyLen > 0) {
-                  flags |= (dummyLen - 1);
-                }
-                if (addrLen > 0) {
-                  flags |= (addrLen - 1) << SPI_USR_ADDR_LEN_SHIFT;
-                }
-                if (flags) {
-                    await this.writeRegister(SPI_USR1_REG, flags);
-                }
-            }
-        } else {
-            setDataLengths = async function (mosi_bits, miso_bits) {
-                const SPI_DATA_LEN_REG = SPI_USR1_REG;
-                const SPI_MOSI_BITLEN_S = 17;
-                const SPI_MISO_BITLEN_S = 8;
-                let mosi_mask = (mosi_bits == 0) ? 0 : (mosi_bits - 1);
-                let miso_mask = (miso_bits == 0) ? 0 : (miso_bits - 1);
-                flags = (miso_mask << SPI_MISO_BITLEN_S) | (mosi_mask << SPI_MOSI_BITLEN_S);
-                if (dummyLen > 0) {
-                    flags |= (dummyLen - 1);
-                }
-                if (addrLen > 0) {
-                    flags |= (addrLen - 1) << SPI_USR_ADDR_LEN_SHIFT;
-                }
-                await this.writeRegister(SPI_DATA_LEN_REG, flags);
-            }
-        }
-        setDataLengths = setDataLengths.bind(this);
-        if (readBits > 32) {
-            throw new FatalError("Reading more than 32 bits back from a SPI flash operation is unsupported")
-        }
-        if (data.length > 64) {
-            throw new FatalError("Writing more than 64 bytes of data with one SPI command is unsupported")
-        }
+  async runSpiflashCommand(
+    spiflashCommand,
+    data = [],
+    readBits = 0,
+    addr = null,
+    addrLen = 0,
+    dummyLen = 0
+  ) {
+    let chipType = await this.chipType();
+    let chipInfo = this.getChipInfo(chipType);
 
-        let dataBits = data.length * 8
-        let old_spi_usr = await this.readRegister(SPI_USR_REG);
-        let old_spi_usr2 = await this.readRegister(SPI_USR2_REG);
-        flags = SPI_USR_COMMAND;
-        if (readBits > 0) {
-            flags |= SPI_USR_MISO;
-        }
-        if (dataBits > 0) {
-            flags |= SPI_USR_MOSI;
+    // SPI_USR register flags
+    const SPI_USR_COMMAND = 1 << 31;
+    const SPI_USR_ADDR = 1 << 30;
+    const SPI_USR_DUMMY = 1 << 29;
+    const SPI_USR_MISO = 1 << 28;
+    const SPI_USR_MOSI = 1 << 27;
+
+    // SPI registers, base address differs ESP32* vs 8266
+    const base = chipInfo.spiRegBase;
+    const SPI_CMD_REG = base + 0x00;
+    const SPI_ADDR_REG = base + 0x04;
+    const SPI_USR_REG = base + chipInfo.spiUsrOffs;
+    const SPI_USR1_REG = base + chipInfo.spiUsr1Offs;
+    const SPI_USR2_REG = base + chipInfo.spiUsr2Offs;
+    const SPI_W0_REG = base + chipInfo.spiW0Offs;
+
+    // shift values
+    const SPI_USR2_COMMAND_LEN_SHIFT = 28;
+    const SPI_USR_ADDR_LEN_SHIFT = 26;
+
+    // SPI peripheral "command" bitmasks for SPI_CMD_REG
+    const SPI_CMD_USR = 1 << 18;
+
+    let setDataLengths;
+    let flags;
+    //following two registers are ESP32 and later chips only
+    if (chipInfo.spiMosiDlenOffs != null) {
+      // ESP32 and later chips have a more sophisticated way to set up "user" commands
+      setDataLengths = async function (mosi_bits, miso_bits) {
+        const SPI_MOSI_DLEN_REG = base + chipInfo.spiMosiDlenOffs;
+        const SPI_MISO_DLEN_REG = base + chipInfo.spiMisoDlenOffs;
+        if (mosi_bits > 0) {
+          await this.writeRegister(SPI_MOSI_DLEN_REG, mosi_bits - 1);
         }
-        if (addrLen > 0) {
-            flags |= SPI_USR_ADDR;
+        if (miso_bits > 0) {
+          await this.writeRegister(SPI_MISO_DLEN_REG, miso_bits - 1);
         }
+        flags = 0;
         if (dummyLen > 0) {
-            flags |= SPI_USR_DUMMY;
+          flags |= dummyLen - 1;
         }
-        await setDataLengths(dataBits, readBits);
-        await this.writeRegister(SPI_USR_REG, flags)
-        await this.writeRegister(SPI_USR2_REG,
-                       (7 << SPI_USR2_COMMAND_LEN_SHIFT) | spiflashCommand)
-        if (addr != null && addrLen > 0) {
-            await this.writeRegister(SPI_ADDR_REG, addr);
+        if (addrLen > 0) {
+          flags |= (addrLen - 1) << SPI_USR_ADDR_LEN_SHIFT;
         }
-        if (dataBits == 0) {
-            await this.writeRegister(SPI_W0_REG, 0)  // clear data register before we read it
-        } else {
-            data = data.concat(new Array(4 - data.length).fill(0));  // pad to 32-bit multiple
-            let words = struct.unpack("I" * Math.floor(data.length / 4), data);
-            let next_reg = SPI_W0_REG;
-            for (let word of words) {
-                await this.writeRegister(next_reg, word)
-                next_reg += 4;
-            }
+        if (flags) {
+          await this.writeRegister(SPI_USR1_REG, flags);
         }
-        await this.writeRegister(SPI_CMD_REG, SPI_CMD_USR)
-
-        let waitDone = async function() {
-            for (let i = 0; i < 10; i++) {
-                if ((await this.readRegister(SPI_CMD_REG) & SPI_CMD_USR) == 0) {
-                    return
-                }
-            }
-            throw new FatalError("SPI command did not complete in time")
+      };
+    } else {
+      setDataLengths = async function (mosi_bits, miso_bits) {
+        const SPI_DATA_LEN_REG = SPI_USR1_REG;
+        const SPI_MOSI_BITLEN_S = 17;
+        const SPI_MISO_BITLEN_S = 8;
+        let mosi_mask = mosi_bits == 0 ? 0 : mosi_bits - 1;
+        let miso_mask = miso_bits == 0 ? 0 : miso_bits - 1;
+        flags =
+          (miso_mask << SPI_MISO_BITLEN_S) | (mosi_mask << SPI_MOSI_BITLEN_S);
+        if (dummyLen > 0) {
+          flags |= dummyLen - 1;
+        }
+        if (addrLen > 0) {
+          flags |= (addrLen - 1) << SPI_USR_ADDR_LEN_SHIFT;
         }
-        waitDone = waitDone.bind(this);
-        await waitDone();
+        await this.writeRegister(SPI_DATA_LEN_REG, flags);
+      };
+    }
+    setDataLengths = setDataLengths.bind(this);
+    if (readBits > 32) {
+      throw new FatalError(
+        "Reading more than 32 bits back from a SPI flash operation is unsupported"
+      );
+    }
+    if (data.length > 64) {
+      throw new FatalError(
+        "Writing more than 64 bytes of data with one SPI command is unsupported"
+      );
+    }
 
-        let status = await this.readRegister(SPI_W0_REG);
-        // restore some SPI controller registers
-        await this.writeRegister(SPI_USR_REG, old_spi_usr);
-        await this.writeRegister(SPI_USR2_REG, old_spi_usr2);
-        return status
+    let dataBits = data.length * 8;
+    let old_spi_usr = await this.readRegister(SPI_USR_REG);
+    let old_spi_usr2 = await this.readRegister(SPI_USR2_REG);
+    flags = SPI_USR_COMMAND;
+    if (readBits > 0) {
+      flags |= SPI_USR_MISO;
+    }
+    if (dataBits > 0) {
+      flags |= SPI_USR_MOSI;
+    }
+    if (addrLen > 0) {
+      flags |= SPI_USR_ADDR;
+    }
+    if (dummyLen > 0) {
+      flags |= SPI_USR_DUMMY;
+    }
+    await setDataLengths(dataBits, readBits);
+    await this.writeRegister(SPI_USR_REG, flags);
+    await this.writeRegister(
+      SPI_USR2_REG,
+      (7 << SPI_USR2_COMMAND_LEN_SHIFT) | spiflashCommand
+    );
+    if (addr != null && addrLen > 0) {
+      await this.writeRegister(SPI_ADDR_REG, addr);
+    }
+    if (dataBits == 0) {
+      await this.writeRegister(SPI_W0_REG, 0); // clear data register before we read it
+    } else {
+      data = data.concat(new Array(4 - data.length).fill(0)); // pad to 32-bit multiple
+      let words = struct.unpack("I" * Math.floor(data.length / 4), data);
+      let next_reg = SPI_W0_REG;
+      for (let word of words) {
+        await this.writeRegister(next_reg, word);
+        next_reg += 4;
+      }
+    }
+    await this.writeRegister(SPI_CMD_REG, SPI_CMD_USR);
 
-   }
+    let waitDone = async function () {
+      for (let i = 0; i < 10; i++) {
+        if (((await this.readRegister(SPI_CMD_REG)) & SPI_CMD_USR) == 0) {
+          return;
+        }
+      }
+      throw new FatalError("SPI command did not complete in time");
+    };
+    waitDone = waitDone.bind(this);
+    await waitDone();
+
+    let status = await this.readRegister(SPI_W0_REG);
+    // restore some SPI controller registers
+    await this.writeRegister(SPI_USR_REG, old_spi_usr);
+    await this.writeRegister(SPI_USR2_REG, old_spi_usr2);
+    return status;
+  }
 
   async flashId() {
-    const SPIFLASH_RDID = 0x9F;
+    const SPIFLASH_RDID = 0x9f;
 
     return await this.runSpiflashCommand(SPIFLASH_RDID, [], 24);
   }
@@ -1104,13 +1197,13 @@ class EspLoader {
     }
 
     if (numSectors < 2 * headSectors) {
-      return Math.floor((numSectors + 1) / 2 * sectorSize);
+      return Math.floor(((numSectors + 1) / 2) * sectorSize);
     }
 
     return (numSectors - headSectors) * sectorSize;
-  };
+  }
 
-    /**
+  /**
    * @name memBegin (592)
    * Start downloading an application image to RAM
    */
@@ -1121,17 +1214,30 @@ class EspLoader {
       let load_end = offset + size;
       for (let [start, end] of [
         [stub.data_start, stub.data_start + stub.data.length],
-        [stub.text_start, stub.text_start + stub.text.length]]
-      ) {
+        [stub.text_start, stub.text_start + stub.text.length],
+      ]) {
         if (load_start < end && load_end > start) {
-          throw("Software loader is resident at " + this.toHex(start, 8) + "-" + this.toHex(end, 8) + ". " +
-                "Can't load binary at overlapping address range " + this.toHex(load_start, 8) + "-" + this.toHex(load_end, 8) + ". " +
-                "Try changing the binary loading address.");
+          throw (
+            "Software loader is resident at " +
+            this.toHex(start, 8) +
+            "-" +
+            this.toHex(end, 8) +
+            ". " +
+            "Can't load binary at overlapping address range " +
+            this.toHex(load_start, 8) +
+            "-" +
+            this.toHex(load_end, 8) +
+            ". " +
+            "Try changing the binary loading address."
+          );
         }
       }
     }
 
-    return this.checkCommand(ESP_MEM_BEGIN, struct.pack('<IIII', size, blocks, blocksize, offset));
+    return this.checkCommand(
+      ESP_MEM_BEGIN,
+      struct.pack("<IIII", size, blocks, blocksize, offset)
+    );
   }
 
   /**
@@ -1141,7 +1247,7 @@ class EspLoader {
   async memBlock(data, seq) {
     return await this.checkCommand(
       ESP_MEM_DATA,
-      struct.pack('<IIII', data.length, seq, 0, 0).concat(data),
+      struct.pack("<IIII", data.length, seq, 0, 0).concat(data),
       this.checksum(data)
     );
   }
@@ -1155,14 +1261,14 @@ class EspLoader {
    * before the transmit FIFO is empty. So in these cases we set a short timeout and
    * ignore errors.
    */
-  async memFinish(entrypoint=0) {
+  async memFinish(entrypoint = 0) {
     let timeout = this.IS_STUB ? DEFAULT_TIMEOUT : MEM_END_ROM_TIMEOUT;
-    let data = struct.pack('<II', parseInt(entrypoint == 0), entrypoint);
+    let data = struct.pack("<II", parseInt(entrypoint == 0), entrypoint);
     try {
       return await this.checkCommand(ESP_MEM_END, data, 0, timeout);
     } catch (e) {
       if (this.IS_STUB) {
-        throw(e);
+        throw e;
       }
     }
   }
@@ -1171,7 +1277,7 @@ class EspLoader {
     let chipType = await this.chipType();
     let chipInfo = this.getChipInfo(chipType);
 
-    let response = await fetch('stubs/' + chipInfo.stubFile + '.json');
+    let response = await fetch("stubs/" + chipInfo.stubFile + ".json");
     let stubcode = await response.json();
 
     // Base64 decode the text and data
@@ -1188,14 +1294,14 @@ class EspLoader {
     // Based on current chip, we return the appropriate Rom class
   }
 
-  async runStub(stub=null) {
+  async runStub(stub = null) {
     if (stub === null) {
       stub = await this.getStubCode();
     }
 
     if (this.syncStubDetected || this.IS_STUB) {
-        this.logMsg("Stub is already running. No upload is necessary.");
-        return this.stubClass;
+      this.logMsg("Stub is already running. No upload is necessary.");
+      return this.stubClass;
     }
 
     let ramBlock = ESP_RAM_BLOCK;
@@ -1205,8 +1311,8 @@ class EspLoader {
     }
 
     // Upload
-    this.logMsg("Uploading stub...")
-    for (let field of ['text', 'data']) {
+    this.logMsg("Uploading stub...");
+    for (let field of ["text", "data"]) {
       if (Object.keys(stub).includes(field)) {
         let offset = stub[field + "_start"];
         let length = stub[field].length;
@@ -1222,13 +1328,13 @@ class EspLoader {
         }
       }
     }
-    this.logMsg("Running stub...")
-    await this.memFinish(stub['entry']);
+    this.logMsg("Running stub...");
+    await this.memFinish(stub["entry"]);
 
     let p = await this.readBuffer(500);
     p = String.fromCharCode(...p);
 
-    if (p != 'OHAI') {
+    if (p != "OHAI") {
       throw "Failed to start stub. Unexpected response: " + p;
     }
     this.logMsg("Stub is now running...");
@@ -1258,35 +1364,33 @@ class EspStubLoader extends EspLoader {
    */
   async eraseFlash() {
     await this.checkCommand(ESP_ERASE_FLASH, [], 0, CHIP_ERASE_TIMEOUT);
-  };
+  }
 
   /**
    * @name getFlashWriteSize
    * Get the Flash write size based on the chip
    */
   getFlashWriteSize() {
-      return STUBLOADER_FLASH_WRITE_SIZE;
-  };
+    return STUBLOADER_FLASH_WRITE_SIZE;
+  }
 }
 
-class Esp32StubLoader extends EspStubLoader {
-
-}
+class Esp32StubLoader extends EspStubLoader {}
 
 /*
 Represents error when NVS Partition size given is insufficient
 to accomodate the data in the given csv file
 */
 class SlipReadError extends Error {
-    constructor(message) {
-        super(message);
-        this.name = "SlipReadError";
-    }
+  constructor(message) {
+    super(message);
+    this.name = "SlipReadError";
+  }
 }
 
 class FatalError extends Error {
-    constructor(message) {
-        super(message);
-        this.name = "FatalError";
-    }
+  constructor(message) {
+    super(message);
+    this.name = "FatalError";
+  }
 }