svedit 0.11.1 → 0.12.0

package/README.md

@@ -38,7 +38,7 @@ You can also install Svedit into an existing SvelteKit project with `npm install
 
 Svedit connects eight key pieces:
 
-1. **Schema** - Define your content structure (node types, properties, annotations)
+1. **Schema** - Define your content structure (node types, properties, marks, annotations)
 2. **Document** - An actual document, containing a `document_id` and a flat map of nodes that hold the content
 3. **Session** - Manages the document, selection state, and history
 4. **Transaction** - Groups multiple document operations (create, delete, set) into a single atomic unit with undo/redo support
@@ -64,17 +64,18 @@ Each node has a `kind` that determines its behavior:
 - `document`: A top-level node accessible via a route (e.g. a page, event)
 - `block`: A structured node that contains other nodes or properties
 - `text`: A node with editable text content (can be split and joined)
-- `annotation`: An inline annotation applied to text (bold, link, etc.)
+- `mark`: A content-level range applied to text or a node array (bold, link, section, etc.). Marks are mutually exclusive and render in-place.
+- `annotation`: A metadata/overlay range applied to text or a node array (comments, markers, etc.). Annotations may overlap and are data-only.
 
 ### Choosing between `text` and `block`
 
 `kind: 'text'` opts into the split/join system (`break_text_node`, `join_text_node`), which assumes:
 
-- The node has exactly **one** `annotated_text` property named **`content`**
+- The node has exactly **one** `text` property named **`content`**
 - Pressing Enter splits the node into two nodes of the same type
 - Pressing Backspace at position 0 joins it with the previous node
 
-If **any** of those assumptions don't hold, use `kind: 'block'`. Blocks can still have `annotated_text` properties with full editing support (typing, formatting, selection) — they just don't participate in split/join.
+If **any** of those assumptions don't hold, use `kind: 'block'`. Blocks can still have `text` properties with full editing support (typing, formatting, selection) — they just don't participate in split/join.
 
 > **Common mistake:** A quote node with `content` + `author` properties might seem like `kind: 'text'` because both fields are editable text. But splitting a quote into two half-quotes doesn't make sense, and `join_text_node` hard-codes `node.content` — so Backspace in the `author` field would join the wrong property with the previous block and drop the author text. The correct kind is `'block'`.
 
@@ -84,19 +85,23 @@ If **any** of those assumptions don't hold, use `kind: 'block'`. Blocks can stil
 ```mermaid
 flowchart TD
     Start(["I need a new node type"])
-    Q1{"Is it inline formatting applied within text?"}
+    Q1{"Is it a range applied within text or over child nodes?"}
+    Q1a{"Is it part of the content (formatting) rather than metadata?"}
     Q2{"Is it a top-level routable entry point?"}
     Q3{"Is text the node's entire purpose?"}
-    Q4{"Does it have exactly one annotated_text property?"}
+    Q4{"Does it have exactly one text property named content?"}
     Q5{"Does pressing Enter to split into two nodes make sense?"}
 
-    KindAnnotation["kind: annotation e.g. bold, italic, link"]
+    KindMark["kind: mark e.g. bold, italic, link, section"]
+    KindAnnotation["kind: annotation e.g. comment, marker"]
     KindDocument["kind: document e.g. page, article, event"]
     KindBlock["kind: block e.g. image+caption, quote+author, list, nav, embed"]
     KindText["kind: text e.g. paragraph, heading, list_item"]
 
     Start --> Q1
-    Q1 -->|Yes| KindAnnotation
+    Q1 -->|Yes| Q1a
+    Q1a -->|Yes| KindMark
+    Q1a -->|"No — it's metadata that may overlap"| KindAnnotation
     Q1 -->|No| Q2
     Q2 -->|Yes| KindDocument
     Q2 -->|No| Q3
@@ -121,13 +126,15 @@ Properties of nodes can hold values:
 - `number_array`: An array of numbers
 - `integer_array`: An array of integers
 - `boolean_array`: An array of booleans
-- `annotated_text`: A plain text string with annotations (bold, italic, link etc.). Set `allow_newlines: true` to let users insert line breaks with Shift+Enter, or `false` to keep content single-line (e.g. for titles).
+- `text`: Plain text content with marks (bold, italic, link etc.) and annotations (comments etc.). Text values use `{ content: '', marks: [], annotations: [] }`. Set `allow_newlines: true` to let users insert line breaks with Shift+Enter, or `false` to keep content single-line (e.g. for titles).
 
 Or references:
 
 - `node`: References a single node (e.g. an image node can reference a global asset node)
 - `node_array`: References a sequence of nodes (e.g. page.body references paragraph and list nodes)
 
+`node_array` properties use `node_types` for the child node types they can contain, plus optional `mark_types` for marks that can wrap ranges of child nodes and optional `annotation_types` for overlay annotations.
+
 ```js
 const document_schema = {
 	page: {
@@ -136,6 +143,8 @@ const document_schema = {
 			body: {
 				type: 'node_array',
 				node_types: ['nav', 'paragraph', 'list'],
+				mark_types: ['section'],
+				annotation_types: ['comment'],
 				default_node_type: 'paragraph'
 			}
 		}
@@ -144,8 +153,9 @@ const document_schema = {
 		kind: 'text',
 		properties: {
 			content: {
-				type: 'annotated_text',
-				node_types: ['strong', 'emphasis', 'link'],
+				type: 'text',
+				mark_types: ['strong', 'emphasis', 'link'],
+				annotation_types: ['comment'],
 				allow_newlines: true
 			}
 		}
@@ -154,8 +164,8 @@ const document_schema = {
 		kind: 'text',
 		properties: {
 			content: {
-				type: 'annotated_text',
-				node_types: ['strong', 'emphasis', 'link'],
+				type: 'text',
+				mark_types: ['strong', 'emphasis', 'link'],
 				allow_newlines: true
 			}
 		}
@@ -188,23 +198,31 @@ const document_schema = {
 		}
 	},
 	strong: {
-		kind: 'annotation',
+		kind: 'mark',
 		properties: {}
 	},
 	emphasis: {
-		kind: 'annotation',
+		kind: 'mark',
 		properties: {}
 	},
 	link: {
-		kind: 'annotation',
+		kind: 'mark',
 		properties: {
 			href: { type: 'string' }
 		}
+	},
+	section: {
+		kind: 'mark',
+		properties: {}
+	},
+	comment: {
+		kind: 'annotation',
+		properties: {}
 	}
 };
 ```
 
-Annotation types are defined as nodes with `kind: 'annotation'`. Simple annotations like `strong` and `emphasis` have no properties, while annotations like `link` can carry data (e.g. `href`). Each `annotated_text` property specifies which annotation types are allowed via `node_types` — this lets you control formatting per property (e.g. allow bold and links in body text, but only emphasis in titles).
+Mark types are defined as nodes with `kind: 'mark'`, annotation types as nodes with `kind: 'annotation'`. Simple marks like `strong` and `emphasis` have no properties, while marks like `link` can carry data (e.g. `href`). Each `text` or `node_array` property specifies which types are allowed via `mark_types` and `annotation_types` — this lets you control formatting per property (e.g. allow bold and links in body text, but only emphasis in titles). `mark_types` may only reference `kind: 'mark'` node types and `annotation_types` only `kind: 'annotation'` node types.
 
 ## Document
 
@@ -214,7 +232,60 @@ Rules:
 
 - All nodes must be reachable from the document node (unreachable nodes are discarded)
 - No cyclic references allowed
-- Text content uses `{ text: '', annotations: [] }` format
+- Text properties use `{ content: '', marks: [], annotations: [] }`
+- Node array properties use `{ nodes: [], marks: [], annotations: [] }`
+
+### Node IDs
+
+Node IDs uniquely identify nodes inside a document. They are also used whenever one node references another node, for example in `node`, `node_array.nodes`, and mark or annotation `node_id` values.
+
+Because Svedit also uses these IDs in HTML ids, document paths, and CSS selectors, IDs need to follow a simple, safe format:
+
+- It must be a string.
+- It must not be empty.
+- It must start with a letter (`A-Z`, `a-z`) or underscore (`_`).
+- After the first character, it may contain letters, numbers, underscores, or dashes.
+- It must not contain Svedit's path separator `__`.
+
+Valid examples:
+
+```js
+'page_1';
+'story-hero';
+'_temporary_node';
+```
+
+Invalid examples:
+
+| ID          | Why invalid                                         |
+| ----------- | --------------------------------------------------- |
+| `1`         | Not a string                                        |
+| `'1'`       | Serialized paths would treat this as an array index |
+| `'1_page'`  | Starts with a number                                |
+| `'page.1'`  | `.` is not allowed                                  |
+| `'page__1'` | `__` is reserved as Svedit's path separator         |
+
+The `doc.nodes` map key must also match the node's own `id`:
+
+```js
+nodes: {
+	page_1: {
+		id: 'page_1',
+		type: 'page'
+		// ...
+	}
+}
+```
+
+If you provide `config.generate_id`, every generated ID must follow the same rules. Svedit validates generated IDs immediately and throws if the provider returns an invalid value:
+
+```js
+const session_config = {
+	generate_id: () => `node_${crypto.randomUUID()}`
+};
+```
+
+Provide your own generator: use short custom-alphabet `nanoid` IDs for local documents, monotonic ULIDs (`ulid`) for sortable/synced IDs, or prefixed UUIDs for globally unique IDs.
 
 Here's an example document:
 
@@ -222,6 +293,14 @@ Here's an example document:
 const doc = {
 	document_id: 'page_1',
 	nodes: {
+		strong_1: {
+			id: 'strong_1',
+			type: 'strong'
+		},
+		section_1: {
+			id: 'section_1',
+			type: 'section'
+		},
 		nav_item_1: {
 			id: 'nav_item_1',
 			type: 'nav_item',
@@ -231,37 +310,92 @@ const doc = {
 		nav_1: {
 			id: 'nav_1',
 			type: 'nav',
-			nav_items: ['nav_item_1']
+			nav_items: { nodes: ['nav_item_1'], marks: [], annotations: [] }
 		},
 		paragraph_1: {
 			id: 'paragraph_1',
 			type: 'paragraph',
-			content: { text: 'Hello world.', annotations: [] }
+			content: {
+				content: 'Hello world.',
+				marks: [{ start_offset: 0, end_offset: 5, node_id: 'strong_1' }],
+				annotations: []
+			}
 		},
 		list_item_1: {
 			id: 'list_item_1',
 			type: 'list_item',
-			content: { text: 'First list item', annotations: [] }
+			content: { content: 'First list item', marks: [], annotations: [] }
 		},
 		list_item_2: {
 			id: 'list_item_2',
 			type: 'list_item',
-			content: { text: 'Second list item', annotations: [] }
+			content: { content: 'Second list item', marks: [], annotations: [] }
 		},
 		list_1: {
 			id: 'list_1',
 			type: 'list',
-			list_items: ['list_item_1', 'list_item_2']
+			list_items: { nodes: ['list_item_1', 'list_item_2'], marks: [], annotations: [] }
 		},
 		page_1: {
 			id: 'page_1',
 			type: 'page',
-			body: ['nav_1', 'paragraph_1', 'list_1']
+			body: {
+				nodes: ['nav_1', 'paragraph_1', 'list_1'],
+				marks: [{ start_offset: 1, end_offset: 3, node_id: 'section_1' }],
+				annotations: []
+			}
 		}
 	}
 };
 ```
 
+### Marks and annotations
+
+Marks and annotations are regular nodes attached to a range in a property value. Both use the same attachment shape:
+
+```js
+{
+	start_offset: 0,
+	end_offset: 5,
+	node_id: 'strong_1'
+}
+```
+
+They differ in semantics:
+
+- **Marks** are part of the content (bold, italic, link, section). They are mutually exclusive within a property and are rendered in-place by `<TextProperty>`/`<NodeArrayProperty>`.
+- **Annotations** are metadata layered over the content (comments, markers). They may overlap marks and each other, and are data-only: Svedit keeps and transforms the data (and adds CSS classes to covered node wrappers), but your app is responsible for interpreting it. Annotation types must not have registered components.
+
+For `text` properties, offsets address character positions in the `content` string:
+
+```js
+{
+	id: 'paragraph_1',
+	type: 'paragraph',
+	content: {
+		content: 'Hello world.',
+		marks: [{ start_offset: 0, end_offset: 5, node_id: 'strong_1' }],
+		annotations: [{ start_offset: 3, end_offset: 8, node_id: 'comment_1' }]
+	}
+}
+```
+
+For `node_array` properties, offsets address node positions in the `nodes` array. This lets you wrap a contiguous group of child nodes with the same range model:
+
+```js
+{
+	id: 'page_1',
+	type: 'page',
+	body: {
+		nodes: ['paragraph_1', 'paragraph_2', 'paragraph_3'],
+		marks: [{ start_offset: 1, end_offset: 3, node_id: 'section_1' }],
+		annotations: []
+	}
+}
+```
+
+The ranges are half-open: `start_offset` is included, `end_offset` is excluded. Marks must not overlap; annotations may overlap (including same-type annotations created through lower-level APIs).
+
 ### Document schema changes
 
 Svedit validates documents against the current schema when you create a `Session`. If you change the schema, you are responsible for migrating existing documents before loading them.
@@ -277,7 +411,7 @@ const document_schema = {
 		properties: {
 			layout: { type: 'integer', default: 1 },
 			content: {
-				type: 'annotated_text',
+				type: 'text',
 				allow_newlines: true
 			}
 		}
@@ -288,7 +422,7 @@ const migrated_doc = fill_document_defaults(existing_doc, document_schema);
 const session = new Session(document_schema, migrated_doc, config);
 ```
 
-This only fills properties that are missing. Explicit schema `default` values are used when present; otherwise Svedit uses built-in defaults for value types such as strings, numbers, booleans, arrays, `node_array`, and `annotated_text`. Existing values are preserved, and the original document object is not mutated.
+This only fills properties that are missing. Explicit schema `default` values are used when present; otherwise Svedit uses built-in defaults for value types such as strings, numbers, booleans, arrays, `node_array`, and `text`. Existing values are preserved, and the original document object is not mutated.
 
 Defaults make it safe to add new defaultable properties, but they are not a replacement for real document migrations. If you rename a property, remove a property, split one property into several, change node types, or need to transform existing data, write your own migration first and use `fill_document_defaults` only as a helper where appropriate.
 
@@ -321,7 +455,7 @@ const session_config = {
 
   // Functions that create and insert new nodes
   inserters: {
-    text: (tr, content = {text: '', annotations: []}) => {
+    text: (tr, content = { content: '', marks: [], annotations: [] }) => {
       const text_id = nanoid();
       tr.create({ id: text_id, type: 'text', content });
       tr.insert_nodes([text_id]);
@@ -369,11 +503,11 @@ const session = new Session(schema, doc, config);
 ### Reading the graph
 
 ```js
-session.get(['page_1', 'body']); // => ['nav_1', 'paragraph_1', 'list_1']
+session.get(['page_1', 'body']); // => { nodes: ['nav_1', 'paragraph_1', 'list_1'], marks: [], annotations: [] }
 session.get(['nav_1']); // => { id: 'nav_1', type: 'nav', ... }
 session.get('nav_1'); // => shorthand for above (single node ID)
 session.inspect(['page_1', 'body']); // => { kind: 'property', type: 'node_array', node_types: [...] }
-session.kind(node); // => 'text', 'block', or 'annotation'
+session.kind(node); // => 'text', 'block', 'mark', or 'annotation'
 ```
 
 ### Selection and state
@@ -381,8 +515,12 @@ session.kind(node); // => 'text', 'block', or 'annotation'
 ```js
 session.selection; // Current selection (text, node, or property)
 session.selected_node; // The currently selected node (derived)
-session.active_annotation('strong'); // Check if annotation is active at caret
+session.selected_marks; // Mark records touched by the current selection (derived)
+session.active_mark; // The selected mark record when exactly one mark is touched, otherwise null
+session.selected_annotations; // Annotation records touched by the current selection (derived)
+session.active_annotation; // The selected annotation record when exactly one annotation is touched, otherwise null
 session.can_insert('paragraph'); // Check if node type can be inserted
+session.available_mark_types; // Mark types allowed at current selection (derived)
 session.available_annotation_types; // Annotation types allowed at current selection (derived)
 ```
 
@@ -392,7 +530,7 @@ Every selection that can exist in Svedit must have a DOM representation. This is
 
 This applies to all selection types:
 
-- Text selections are native selections inside an `annotated_text` property.
+- Text selections are native selections inside a `text` property.
 - Node selections are native selections whose anchor and focus land inside the selected node range.
 - Property selections are native selections inside the DOM representation of that property.
 
@@ -515,7 +653,7 @@ function insert_heading(tr) {
 
 	// Create and insert a heading node
 	const heading_id = tr.generate_id();
-	tr.create({ id: heading_id, type: 'heading', content: { text: '', annotations: [] } });
+	tr.create({ id: heading_id, type: 'heading', content: { content: '', marks: [], annotations: [] } });
 	tr.insert_nodes([heading_id]);
 
 	return true;
@@ -538,7 +676,7 @@ session.apply(tr); // Apply atomically
 
 ```js
 // Create a new node (must include all required properties from schema)
-tr.create({ id: 'paragraph_1', type: 'paragraph', content: { text: '', annotations: [] } });
+tr.create({ id: 'paragraph_1', type: 'paragraph', content: { content: '', marks: [], annotations: [] } });
 
 // Delete a node (cascades to unreferenced child nodes)
 tr.delete('paragraph_26');
@@ -556,7 +694,7 @@ const new_node_id = tr.build('the_list', {
 	the_list: {
 		id: 'the_list',
 		type: 'list',
-		list_items: ['first_item']
+		list_items: { nodes: ['first_item'], marks: [], annotations: [] }
 	}
 });
 ```
@@ -567,9 +705,12 @@ const new_node_id = tr.build('the_list', {
 // Insert text at caret (replaces selection if expanded)
 tr.insert_text('Hello');
 
-// Toggle annotation on selected text
-tr.annotate_text('strong');
-tr.annotate_text('link', { href: 'https://example.com' });
+// Toggle mark on selected text (marks are mutually exclusive)
+tr.toggle_mark('strong');
+tr.toggle_mark('link', { href: 'https://example.com' });
+
+// Toggle annotation on selected text (competes only with same-type annotations)
+tr.toggle_annotation('comment');
 
 // Delete selected text or nodes
 tr.delete_selection();
@@ -621,7 +762,7 @@ class ToggleStrongCommand extends Command {
 	}
 
 	execute() {
-		this.context.session.apply(this.context.session.tr.annotate_text('strong'));
+		this.context.session.apply(this.context.session.tr.toggle_mark('strong'));
 	}
 }
 ```
@@ -666,7 +807,8 @@ Svedit provides several [core commands](src/lib/Command.svelte.js) out of the bo
 - `UndoCommand` - Undo the last change
 - `RedoCommand` - Redo the last undone change
 - `SelectParentCommand` - Select the parent of the current selection
-- `ToggleAnnotationCommand` - Toggle text annotations (bold, italic, etc.)
+- `ToggleMarkCommand` - Toggle marks on text or node-array selections
+- `ToggleAnnotationCommand` - Toggle annotations on text or node-array selections
 - `AddNewLineCommand` - Insert newline character in text
 - `BreakTextNodeCommand` - Split text node at caret
 - `SelectAllCommand` - Progressively expand selection
@@ -681,8 +823,8 @@ create_commands_and_keymap: (context) => {
 	const commands = {
 		undo: new UndoCommand(context),
 		redo: new RedoCommand(context),
-		toggle_strong: new ToggleAnnotationCommand('strong', context),
-		toggle_emphasis: new ToggleAnnotationCommand('emphasis', context)
+		toggle_strong: new ToggleMarkCommand('strong', context),
+		toggle_emphasis: new ToggleMarkCommand('emphasis', context)
 		// ... more commands
 	};
 
@@ -714,15 +856,15 @@ Commands can have derived state for reactive UI binding. The `active` property i
 
 ```js
 class ToggleEmphasisCommand extends Command {
-	// Automatically recomputes when annotation state changes
-	active = $derived(this.context.session.active_annotation('emphasis'));
+	// Automatically recomputes when mark state changes
+	active = $derived(this.context.session.active_mark?.node.type === 'emphasis');
 
 	is_enabled() {
 		return this.context.editable && this.context.session.selection?.type === 'text';
 	}
 
 	execute() {
-		this.context.session.apply(this.context.session.tr.annotate_text('emphasis'));
+		this.context.session.apply(this.context.session.tr.toggle_mark('emphasis'));
 	}
 }
 ```
@@ -957,13 +1099,13 @@ A typical node component follows this pattern:
 
 ```svelte
 <script>
-	import { Node, AnnotatedTextProperty } from 'svedit';
+	import { Node, TextProperty } from 'svedit';
 	let { path } = $props();
 </script>
 
 <Node {path}>
 	<div class="my-node">
-		<AnnotatedTextProperty path={[...path, 'content']} />
+		<TextProperty path={[...path, 'content']} />
 	</div>
 </Node>
 ```
@@ -980,15 +1122,10 @@ Every node component must wrap its content in the `<Node>` component. This wrapp
 
 Svedit provides specialized components for rendering different property types:
 
-**`<AnnotatedTextProperty>`** - For editable text content with inline formatting:
+**`<TextProperty>`** - For editable text content with inline marks:
 
 ```svelte
-<AnnotatedTextProperty
-	tag="p"
-	class="body"
-	path={[...path, 'content']}
-	placeholder="Enter text here"
-/>
+<TextProperty tag="p" class="body" path={[...path, 'content']} placeholder="Enter text here" />
 ```
 
 **`<NodeArrayProperty>`** - For container properties that hold multiple nodes:
@@ -997,6 +1134,40 @@ Svedit provides specialized components for rendering different property types:
 <NodeArrayProperty class="list-items" path={[...path, 'list_items']} />
 ```
 
+Node arrays can also carry marks and annotations when their schema includes `mark_types`/`annotation_types`. The value still has one `nodes` array, plus `marks` and `annotations` arrays whose offsets refer to node indexes:
+
+```js
+buttons: {
+	nodes: ['button_1', 'button_2', 'button_3'],
+	marks: [{ start_offset: 0, end_offset: 2, node_id: 'section_1' }],
+	annotations: []
+}
+```
+
+`<NodeArrayProperty>` wraps marked ranges with the matching mark component, just like `<TextProperty>` does for text ranges. Child node components also receive range context:
+
+```svelte
+<script>
+	let { path, mark: section = null, annotations = [] } = $props();
+</script>
+
+<div class:section-start={section?.is_start}>
+	<!-- render node content -->
+</div>
+```
+
+`mark` is the mark wrapping the child node, or `null` when none does — mark exclusivity guarantees there is at most one. `annotations` contains all annotations covering the child node, including overlapping ones. Annotations are data-only: they never wrap and are never rendered as components. Each entry contains the flattened attachment plus context for the current child node: `start_offset`, `end_offset`, `node_id`, `index`, `node`, `is_start`, `is_middle`, `is_end`. `node` is the resolved mark or annotation node, `index` is the position in the parent `marks`/`annotations` array, and the `is_*` flags describe the current child node's position in the attached range.
+
+For styling, you usually don't need the props at all: `<Node>` adds range classes to the node wrapper automatically. A node covered by a `section` mark gets `mark-section`, a node covered by a `marker` annotation gets `anno-marker` — plus `-start`/`-end` variants on the run's first/last covered node. So styling a mark or annotation type — including types without a component — is pure CSS:
+
+```css
+.anno-marker {
+	background: color-mix(in oklch, var(--app-primary-fill) 13%, transparent);
+}
+```
+
+Use the `annotations` prop only when a component should render something richer than styles (badges, margin indicators, etc.).
+
 > **One path = one DOM mount.** Within a single Svedit document, each node path
 > may be mounted exactly once. Mounting the same path twice (e.g. rendering the
 > same `nav_items` array in both header and footer) breaks anchor positioning,
@@ -1012,7 +1183,7 @@ Svedit provides specialized components for rendering different property types:
 ```svelte
 <CustomProperty class="image-wrapper" path={[...path, 'image']}>
 	<div contenteditable="false">
-		<img src={node.image} alt={node.title.text} />
+		<img src={node.image} alt={node.title.content} />
 	</div>
 </CustomProperty>
 ```
@@ -1039,7 +1210,7 @@ Here's a complete example of a text node component that supports multiple layout
 ```svelte
 <script>
 	import { getContext } from 'svelte';
-	import { Node, AnnotatedTextProperty } from 'svedit';
+	import { Node, TextProperty } from 'svedit';
 
 	const svedit = getContext('svedit');
 	let { path } = $props();
@@ -1050,12 +1221,7 @@ Here's a complete example of a text node component that supports multiple layout
 
 <Node {path}>
 	<div class="text layout-{layout}">
-		<AnnotatedTextProperty
-			{tag}
-			class="body"
-			path={[...path, 'content']}
-			placeholder="Enter text"
-		/>
+		<TextProperty {tag} class="body" path={[...path, 'content']} placeholder="Enter text" />
 	</div>
 </Node>
 ```
@@ -1113,7 +1279,7 @@ a simplified version of the markup of `<NodeGap>` and why it is implemented the
       And using <span></span> will not make it addressable at all.
 
       Svedit uses this behavior for node gaps, and when an
-      <AnnotatedTextProperty> is empty.
+      <TextProperty> is empty.
     -->
 		<div class="node-gap"><br /></div>
 		<!--
@@ -1132,8 +1298,8 @@ a simplified version of the markup of `<NodeGap>` and why it is implemented the
 Further things to consider:
 
 - If you make a sub-tree `contenteditable="false"`, be aware that you can't create a `contenteditable="true"` segment somewhere inside it. Svedit can only work reliably when there's one contenteditable="true" at root (it's set by `<Svedit`>)
-- `<AnnotatedTextProperty>` and `<CustomProperty>` must not be wrapped in `contenteditable="false"` to work properly.
-- Never apply `position: relative` to the direct parent of `<AnnotatedTextProperty>`, it will cause a [weird Safari bug](https://bsky.app/profile/michaelaufreiter.com/post/3lxvdqyxc622s) to destroy the DOM.
+- `<TextProperty>` and `<CustomProperty>` must not be wrapped in `contenteditable="false"` to work properly.
+- Never apply `position: relative` to the direct parent of `<TextProperty>`, it will cause a [weird Safari bug](https://bsky.app/profile/michaelaufreiter.com/post/3lxvdqyxc622s) to destroy the DOM.
 - Never apply `position: relative`, `position: absolute`, `position: fixed` to `<Node.svelte>` (data-type="node") in edit mode. Only `position: static` is permitted to allow css anchor positioning queries to resolve correctly.
 - Never use an `<a>` tag inside a `contenteditable="true"` element, as it will cause unexpected behavior. Make it a `<div>` while editing, and an `<a>` in read-only mode (when `svedit.editable` is `false` ).
 - Avoid adding css `margin` to nodes inside node arrays when using flex or grid layouts. Use `gap` on the container instead. This ensures `NodeGap` and `NodeGapMarkers` render consistently. If you need to add a margin, add it to a child element of Node.

package/dist/Command.svelte.d.ts

@@ -71,15 +71,32 @@ export class SelectParentCommand extends Command {
     execute(): void;
 }
 /**
- * Generic command that toggles an annotation on the current text selection.
- * Used for simple annotations like bold, italic, highlight, etc.
+ * Generic command that toggles a mark on the current text or node selection.
+ *
+ * Marks are mutually exclusive, so all touched marks compete: same-type marks
+ * are removed, a single touched property-less mark may switch type, and mixed
+ * touched types disable the command. Annotations never affect mark toggling.
  */
-export class ToggleAnnotationCommand extends Command {
+export class ToggleMarkCommand extends Command {
     constructor(node_type: any, context: any);
     node_type: any;
     active: any;
     is_active(): any;
-    is_enabled(): any;
+    execute(): void;
+}
+/**
+ * Generic command that toggles an annotation on the current text or node selection.
+ *
+ * Annotations only compete with touched annotations of the same type: touched
+ * same-type annotations are removed, otherwise a new annotation is created.
+ * Marks and other annotation types never block the toggle.
+ */
+export class ToggleAnnotationCommand extends Command {
+    constructor(node_type: any, context: any);
+    node_type: any;
+    active: boolean;
+    relevant_annotations(): any;
+    is_active(): boolean;
     execute(): void;
 }
 /**

package/dist/Command.svelte.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"Command.svelte.d.ts","sourceRoot":"","sources":["../src/lib/Command.svelte.js"],"names":[],"mappings":"AAIA;;;;;;;;;;;;;;;;;;;;;GAqBG;AACH;IAOC;;;;OAIG;IACH,qBAFW,GAAG,EAIb;IAbD;;;OAGG;IACH,kBAAwC;IAQvC,aAAsB;IAGvB;;;;;OAKG;IACH,cAFa,OAAO,CAInB;IAED;;;;;;OAMG;IACH,WAFa,IAAI,GAAG,OAAO,CAAC,IAAI,CAAC,CAIhC;CACD;AAED;;GAEG;AACH;IACC,kBAEC;IAED,gBAEC;CACD;AAED;;GAEG;AACH;IACC,kBAEC;IAED,gBAEC;CACD;AAED;;;GAGG;AACH;IASC,gBAEC;CACD;AAED;;;GAGG;AACH;IACC,0CAGC;IADA,eAA0B;IAG3B,YAAoC;IAEpC,iBAEC;IAED,kBAqBC;IAED,gBAEC;CACD;AAED;;;GAGG;AACH;IACC,kBASC;IAED,gBAqBC;CACD;AAED;;;;GAIG;AACH;IAaC,gBAKC;CACD;AAED;;;GAGG;AACH;IACC,kBAEC;IAED,gBAwGC;CACD;AAED;;;GAGG;AACH;IAUC,gBAIC;CACD"}
+{"version":3,"file":"Command.svelte.d.ts","sourceRoot":"","sources":["../src/lib/Command.svelte.js"],"names":[],"mappings":"AAIA;;;;;;;;;;;;;;;;;;;;;GAqBG;AACH;IAOC;;;;OAIG;IACH,qBAFW,GAAG,EAIb;IAbD;;;OAGG;IACH,kBAAwC;IAQvC,aAAsB;IAGvB;;;;;OAKG;IACH,cAFa,OAAO,CAInB;IAED;;;;;;OAMG;IACH,WAFa,IAAI,GAAG,OAAO,CAAC,IAAI,CAAC,CAIhC;CACD;AAED;;GAEG;AACH;IACC,kBAEC;IAED,gBAEC;CACD;AAED;;GAEG;AACH;IACC,kBAEC;IAED,gBAEC;CACD;AAED;;;GAGG;AACH;IASC,gBAEC;CACD;AAED;;;;;;GAMG;AACH;IACC,0CAGC;IADA,eAA0B;IAG3B,YAAoC;IAEpC,iBAMC;IA2BD,gBAEC;CACD;AAED;;;;;;GAMG;AACH;IACC,0CAGC;IADA,eAA0B;IAG3B,gBAAoC;IAIpC,4BAIC;IAED,qBAEC;IAmBD,gBAEC;CACD;AAED;;;GAGG;AACH;IACC,kBASC;IAED,gBAqBC;CACD;AAED;;;;GAIG;AACH;IAaC,gBAKC;CACD;AAED;;;GAGG;AACH;IACC,kBAEC;IAED,gBAwGC;CACD;AAED;;;GAGG;AACH;IAUC,gBAIC;CACD"}