sqlmath 0.0.1 → 2021.11.20

package/sqlite-autoconf-3360000/tea/win/makefile.vc

@@ -1,419 +0,0 @@
-# makefile.vc --                                               -*- Makefile -*-
-#
-# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
-#
-# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to 
-# make it suitable as a general package makefile. Look for the word EDIT
-# which marks sections that may need modification. As a minumum you will
-# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
-# relevant to your package.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-# 
-# Copyright (c) 1995-1996 Sun Microsystems, Inc.
-# Copyright (c) 1998-2000 Ajuba Solutions.
-# Copyright (c) 2001 ActiveState Corporation.
-# Copyright (c) 2001-2002 David Gravereaux.
-# Copyright (c) 2003 Pat Thoyts
-#
-#-------------------------------------------------------------------------
-# RCS: @(#)$Id: makefile.vc,v 1.4 2004/07/26 08:22:05 patthoyts Exp $
-#-------------------------------------------------------------------------
-
-!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR)
-MSG = ^
-You will need to run vcvars32.bat from Developer Studio, first, to setup^
-the environment.  Jump to this line to read the new instructions.
-!error $(MSG)
-!endif
-
-#------------------------------------------------------------------------------
-# HOW TO USE this makefile:
-#
-# 1)  It is now necessary to have %MSVCDir% set in the environment.  This is
-#     used  as a check to see if vcvars32.bat had been run prior to running
-#     nmake or during the installation of Microsoft Visual C++, MSVCDir had
-#     been set globally and the PATH adjusted.  Either way is valid.
-#
-#     You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
-#     directory to setup the proper environment, if needed, for your current
-#     setup.  This is a needed bootstrap requirement and allows the swapping of
-#     different environments to be easier.
-#
-# 2)  To use the Platform SDK (not expressly needed), run setenv.bat after
-#     vcvars32.bat according to the instructions for it.  This can also turn on
-#     the 64-bit compiler, if your SDK has it.
-#
-# 3)  Targets are:
-#	all       -- Builds everything.
-#       <project> -- Builds the project (eg: nmake sample)
-#	test      -- Builds and runs the test suite.
-#	install   -- Installs the built binaries and libraries to $(INSTALLDIR)
-#		     in an appropriate subdirectory.
-#	clean/realclean/distclean -- varying levels of cleaning.
-#
-# 4)  Macros usable on the commandline:
-#	INSTALLDIR=<path>
-#		Sets where to install Tcl from the built binaries.
-#		C:\Progra~1\Tcl is assumed when not specified.
-#
-#	OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none
-#		Sets special options for the core.  The default is for none.
-#		Any combination of the above may be used (comma separated).
-#		'none' will over-ride everything to nothing.
-#
-#		static  =  Builds a static library of the core instead of a
-#			   dll.  The shell will be static (and large), as well.
-#		msvcrt  =  Effects the static option only to switch it from
-#			   using libcmt(d) as the C runtime [by default] to
-#			   msvcrt(d). This is useful for static embedding
-#			   support.
-#		staticpkg = Effects the static option only to switch
-#			   tclshXX.exe to have the dde and reg extension linked
-#			   inside it.
-#		threads =  Turns on full multithreading support.
-#		thrdalloc = Use the thread allocator (shared global free pool).
-#		symbols =  Adds symbols for step debugging.
-#		profile =  Adds profiling hooks.  Map file is assumed.
-#		loimpact =  Adds a flag for how NT treats the heap to keep memory
-#			   in use, low.  This is said to impact alloc performance.
-#
-#	STATS=memdbg,compdbg,none
-#		Sets optional memory and bytecode compiler debugging code added
-#		to the core.  The default is for none.  Any combination of the
-#		above may be used (comma separated).  'none' will over-ride
-#		everything to nothing.
-#
-#		memdbg   = Enables the debugging memory allocator.
-#		compdbg  = Enables byte compilation logging.
-#
-#	MACHINE=(IX86|IA64|ALPHA)
-#		Set the machine type used for the compiler, linker, and
-#		resource compiler.  This hook is needed to tell the tools
-#		when alternate platforms are requested.  IX86 is the default
-#		when not specified.
-#
-#	TMP_DIR=<path>
-#	OUT_DIR=<path>
-#		Hooks to allow the intermediate and output directories to be
-#		changed.  $(OUT_DIR) is assumed to be 
-#		$(BINROOT)\(Release|Debug) based on if symbols are requested.
-#		$(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
-#
-#	TESTPAT=<file>
-#		Reads the tests requested to be run from this file.
-#
-#	CFG_ENCODING=encoding
-#		name of encoding for configuration information. Defaults
-#		to cp1252
-#
-# 5)  Examples:
-#
-#	Basic syntax of calling nmake looks like this:
-#	nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
-#
-#                        Standard (no frills)
-#       c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
-#       Setting environment for using Microsoft Visual C++ tools.
-#       c:\tcl_src\win\>nmake -f makefile.vc all
-#       c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
-#
-#                         Building for Win64
-#       c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
-#       Setting environment for using Microsoft Visual C++ tools.
-#       c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
-#       Targeting Windows pre64 RETAIL
-#       c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
-#
-#------------------------------------------------------------------------------
-#==============================================================================
-###############################################################################
-#------------------------------------------------------------------------------
-
-!if !exist("makefile.vc")
-MSG = ^
-You must run this makefile only from the directory it is in.^
-Please `cd` to its location first.
-!error $(MSG)
-!endif
-
-#-------------------------------------------------------------------------
-# Project specific information (EDIT)
-#
-# You should edit this with the name and version of your project. This
-# information is used to generate the name of the package library and
-# it's install location.
-#
-# For example, the sample extension is  going to build sample04.dll and
-# would install it into $(INSTALLDIR)\lib\sample04
-#
-# You need to specify the object files that need to be linked into your
-# binary here.
-#
-#-------------------------------------------------------------------------
-
-PROJECT = sqlite3
-!include "rules.vc"
-
-# nmakehelp -V <file> <tag> will search the file for tag, skips until a
-#	number and returns all character until a character not in [0-9.ab]
-#	is read.
-
-!if [echo REM = This file is generated from Makefile.vc > versions.vc]
-!endif
-# get project version from row "AC_INIT([sqlite], [3.x.y])"
-!if [echo DOTVERSION = \>> versions.vc] \
-   && [nmakehlp -V ..\configure.ac AC_INIT >> versions.vc]
-!endif
-!include "versions.vc"
-
-VERSION         = $(DOTVERSION:.=)
-STUBPREFIX      = $(PROJECT)stub
-
-#-------------------------------------------------------------------------
-# Target names and paths ( shouldn't need changing )
-#-------------------------------------------------------------------------
-
-BINROOT		= .
-ROOT            = ..
-
-PRJIMPLIB	= $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
-PRJLIBNAME	= $(PROJECT).$(EXT)
-PRJLIB		= $(OUT_DIR)\$(PRJLIBNAME)
-
-PRJSTUBLIBNAME	= $(STUBPREFIX)$(VERSION).lib
-PRJSTUBLIB	= $(OUT_DIR)\$(PRJSTUBLIBNAME)
-
-### Make sure we use backslash only.
-PRJ_INSTALL_DIR         = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
-LIB_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
-BIN_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
-DOC_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
-SCRIPT_INSTALL_DIR	= $(PRJ_INSTALL_DIR)
-INCLUDE_INSTALL_DIR	= $(_TCLDIR)\include
-
-### The following paths CANNOT have spaces in them.
-GENERICDIR	= $(ROOT)\generic
-WINDIR		= $(ROOT)\win
-LIBDIR          = $(ROOT)\library
-DOCDIR		= $(ROOT)\doc
-TOOLSDIR	= $(ROOT)\tools
-COMPATDIR	= $(ROOT)\compat
-
-### Figure out where the primary source code file(s) is/are.
-!if exist("$(ROOT)\..\..\sqlite3.c") && exist("$(ROOT)\..\..\src\tclsqlite.c")
-SQL_INCLUDES = -I"$(ROOT)\..\.."
-SQLITE_SRCDIR = $(ROOT)\..\..
-TCLSQLITE_SRCDIR = $(ROOT)\..\..\src
-DLLOBJS = $(TMP_DIR)\sqlite3.obj $(TMP_DIR)\tclsqlite.obj
-!else
-TCLSQLITE_SRCDIR = $(ROOT)\generic
-DLLOBJS = $(TMP_DIR)\tclsqlite3.obj
-!endif
-
-#---------------------------------------------------------------------
-# Compile flags
-#---------------------------------------------------------------------
-
-!if !$(DEBUG)
-!if $(OPTIMIZING)
-### This cranks the optimization level to maximize speed
-cdebug	= -O2 -Op -Gs
-!else
-cdebug	=
-!endif
-!else if "$(MACHINE)" == "IA64"
-### Warnings are too many, can't support warnings into errors.
-cdebug	= -Z7 -Od -GZ
-!else
-cdebug	= -Z7 -WX -Od -GZ
-!endif
-
-### Declarations common to all compiler options
-cflags = -nologo -c -W3 -D_CRT_SECURE_NO_WARNINGS -YX -Fp$(TMP_DIR)^\
-
-!if $(MSVCRT)
-!if $(DEBUG)
-crt = -MDd
-!else
-crt = -MD
-!endif
-!else
-!if $(DEBUG)
-crt = -MTd
-!else
-crt = -MT
-!endif
-!endif
-
-INCLUDES	= $(SQL_INCLUDES) $(TCL_INCLUDES) -I"$(WINDIR)" \
-                  -I"$(GENERICDIR)" -I"$(ROOT)\.."
-BASE_CLFAGS	= $(cflags) $(cdebug) $(crt) $(INCLUDES) \
-                  -DSQLITE_3_SUFFIX_ONLY=1 -DSQLITE_ENABLE_RTREE=1 \
-                  -DSQLITE_ENABLE_FTS3=1 -DSQLITE_OMIT_DEPRECATED=1
-CON_CFLAGS	= $(cflags) $(cdebug) $(crt) -DCONSOLE -DSQLITE_ENABLE_FTS3=1
-TCL_CFLAGS	= -DBUILD_sqlite -DUSE_TCL_STUBS \
-                  -DPACKAGE_VERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) \
-                  $(OPTDEFINES)
-
-#---------------------------------------------------------------------
-# Link flags
-#---------------------------------------------------------------------
-
-!if $(DEBUG)
-ldebug	= -debug:full -debugtype:cv
-!else
-ldebug	= -release -opt:ref -opt:icf,3
-!endif
-
-### Declarations common to all linker options
-lflags	= -nologo -machine:$(MACHINE) $(ldebug)
-
-!if $(PROFILE)
-lflags	= $(lflags) -profile
-!endif
-
-!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
-### Align sections for PE size savings.
-lflags	= $(lflags) -opt:nowin98
-!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
-### Align sections for speed in loading by choosing the virtual page size.
-lflags	= $(lflags) -align:4096
-!endif
-
-!if $(LOIMPACT)
-lflags	= $(lflags) -ws:aggressive
-!endif
-
-dlllflags = $(lflags) -dll
-conlflags = $(lflags) -subsystem:console
-guilflags = $(lflags) -subsystem:windows
-baselibs   = $(TCLSTUBLIB)
-
-#---------------------------------------------------------------------
-# TclTest flags
-#---------------------------------------------------------------------
-
-!IF "$(TESTPAT)" != ""
-TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
-!ENDIF
-
-#---------------------------------------------------------------------
-# Project specific targets (EDIT)
-#---------------------------------------------------------------------
-
-all:	    setup $(PROJECT)
-$(PROJECT): setup $(PRJLIB)
-install:    install-binaries install-libraries install-docs
-
-# Tests need to ensure we load the right dll file we
-# have to handle the output differently on Win9x.
-#
-!if "$(OS)" == "Windows_NT"  || "$(MSVCDIR)" == "IDE"
-test: setup $(PROJECT)
-        set TCL_LIBRARY=$(ROOT)/library
-        $(TCLSH) <<
-load $(PRJLIB:\=/)
-cd "$(ROOT)/tests"
-set argv "$(TESTFLAGS)"
-source all.tcl
-<<
-!else
-test: setup $(PROJECT)
-        echo Please wait while the test results are collected
-        set TCL_LIBRARY=$(ROOT)/library
-        $(TCLSH) << >tests.log
-load $(PRJLIB:\=/)
-cd "$(ROOT)/tests"
-set argv "$(TESTFLAGS)"
-source all.tcl
-<<
-        type tests.log | more
-!endif
-
-setup:
-	@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
-	@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
-
-$(PRJLIB): $(DLLOBJS)
-	$(link32) $(dlllflags) -out:$@ $(baselibs) @<<
-$**
-<<
-	-@del $*.exp
-
-$(PRJSTUBLIB): $(PRJSTUBOBJS)
-	$(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
-
-#---------------------------------------------------------------------
-# Implicit rules
-#---------------------------------------------------------------------
-
-$(TMP_DIR)\sqlite3.obj:		$(SQLITE_SRCDIR)\sqlite3.c
-	$(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ \
-		-c $(SQLITE_SRCDIR)\sqlite3.c
-
-$(TMP_DIR)\tclsqlite.obj:	$(TCLSQLITE_SRCDIR)\tclsqlite.c
-	$(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ \
-		-c $(TCLSQLITE_SRCDIR)\tclsqlite.c
-
-$(TMP_DIR)\tclsqlite3.obj:	$(TCLSQLITE_SRCDIR)\tclsqlite3.c
-	$(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ \
-		-c $(TCLSQLITE_SRCDIR)\tclsqlite3.c
-
-{$(WINDIR)}.rc{$(TMP_DIR)}.res:
-	$(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
-!if $(DEBUG)
-	-d DEBUG \
-!endif
-!if $(TCL_THREADS)
-	-d TCL_THREADS \
-!endif
-!if $(STATIC_BUILD)
-	-d STATIC_BUILD \
-!endif
-	$<
-
-.SUFFIXES:
-.SUFFIXES:.c .rc
-
-#---------------------------------------------------------------------
-# Installation. (EDIT)
-#
-# You may need to modify this section to reflect the final distribution
-# of your files and possibly to generate documentation.
-#
-#---------------------------------------------------------------------
-
-install-binaries:
-	@echo Installing binaries to '$(SCRIPT_INSTALL_DIR)'
-	@if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
-	@$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
-
-install-libraries:
-        @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)'
-        @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)"
-        @echo Installing package index in '$(SCRIPT_INSTALL_DIR)'
-        @type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl"
-package ifneeded $(PROJECT) $(DOTVERSION) \
-    [list load [file join $$dir $(PRJLIBNAME)] sqlite3]
-<<
-
-install-docs:
-	@echo Installing documentation files to '$(DOC_INSTALL_DIR)'
-	@if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)"
-
-#---------------------------------------------------------------------
-# Clean up
-#---------------------------------------------------------------------
-
-clean:
-	@if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
-	@if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc
-
-realclean: clean
-	@if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
-
-distclean: realclean
-	@if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
-	@if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj