spine-parts 2.14.1 → 2.14.2

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
package/docs/AUTHORING.md CHANGED
@@ -159,7 +159,7 @@ read by no CPU stage).
159
159
  | `assemble.alternates` | assemble, rig, check (`--set`, `--all-sets`) | **authored**, optional (issues #454, #465, #472, #473, #476): `[{name, source?, full?, head?, head_box?, parts?, hides?, cuts?, skeleton?, anchor?, base_anchor?, drawn?, tips?, front?}]` — alternate painting sets assembled into `<out>/rig/parts/<set>_<part>.png` (`parts.json` `alternates`), attached on each covered slot in `rig.json` as `<set>_<part>` beside the base attachment, and indexed in `<out>/rig/sets.json` (`rig-parts-sets/1`: `sets.<set>.slots`, `.hides`, `.drawn` when present, and `.threshold: {yaw: 15, pitch: 12}` when the set replaces `face` on a rig with `turn` or `turn`/`tilt` slider animations). `source`, `full` and `head` may instead be given on the CLI with `--alt <name>=<source>:<full>[:<head>]`. Windows absolute drive paths such as `C:\paint\painting.png` are accepted as written; each segment's leading drive colon belongs to that path, while other colons still separate `source`, `full` and `head`. `parts` lists the subset of parts the set replaces (default: every part not in `hides`); a **subset set** (issue #473, e.g. mouth visemes `a`, `i`, `u` with `"parts": ["mouth"]`) cuts only its covered parts from the alternate runs (refusing with `ASSEMBLE_ALT_INPUT_PRESENT` if a covered part's layer is missing or empty), writes only `{slot: "<set>_<slot>"}` in `sets.json` so `@rig-c/play`'s `setSet(name)` switches those slots while leaving every other slot on its base attachment (and `setSet(null)` restores the base pose), may be keyed on a slot attachment track in `motion.animations_from` as `{"t": …, "set": "<name>" \| null}` (`CONFIG_SET_COVERS_SLOT` if `"set"` is undeclared or does not cover the track's slot), and under `check --set <name>` counts `ANIMATIONS_DO_NOT_FOLD` only on its own covered slots; `hides` lists slots the set hides (`null` in `sets.json`). A **gesture subset set** (issue #476) covers a limb chain declared in `config.limbs.<limb>` (all of its segment `part`s; with `drawn` alone, cut at the base's joints posed to the set's own `drawn` angles by `poseBoneEntriesForDrawn`, each segment keeping the base's length; with `skeleton` (issue #539), cut at the skeleton's own joint positions by `placeBoneEntriesForSkeleton` — each covered bone the body-18 table names (`sleeve_*`, `arm_*0`/`arm_*1`, `leg_*0`/`leg_*1`) at its skeleton origin with the skeleton segment's own length and direction (`drawn` overriding the direction of a bone it names), and a covered bone the table does not name (a hand link `arm_r2`, a single `foot_r`) placed from its parent's new place — its base offset from the parent, stretched along the parent by the parent's length change and turned by its turn, so a link or a foot at the parent's end lands on the skeleton's end — with its base length and the drawn or base direction, so a foreshortened shin or forearm is cut where it is painted; naming the unsplit `from` layer, covering only some segments of the limb, or declaring polygon `cuts` on a limb set is refused with `CONFIG_LIMB_SET_JOINTS`) and carries `drawn` (or `skeleton`) for the covered bones only (giving `drawn` for an uncovered bone is refused with `CONFIG_SET_COVERS_BONE` / `RIG_SET_COVERS_BONE`; uncovered bones keep the base's `drawn`). A subset set's limb part takes no pixel that a base part drawn after it, which the set neither covers nor hides, covers at setup (issue #587): the set's attachment is drawn in the base slot's place, so that base part is drawn over it and what the set's painting shows there is that base part (shorts over a leg set's thigh top, which See-through synthesised in the set's leg layer); `assemble` clears those pixels — the base part's PNG at alpha above 8, at its `parts.json` x, y, on the shared canvas — from the set's part once its limbs are cut, before any count — its `merged_px` and its cap's record too (issue #603): a cap pixel it clears leaves the count it was in (`layer_px`, `image_px`, `upper_px`, `lower_px`, `lower_kept_px`) for the cap's `excluded_px`, written only when above 0, so every count is the written PNG's — and prints `LINT set "<set>" <part>: <n> px under <base part> excluded` per part and base part that took a pixel (n counts alpha above 8); a set that carries that base part itself (`"parts": ["thigh_l", "shin_l", "bottomwear"]`) excludes nothing and writes what it wrote before. A subset set that names one limb side of a layer more limbs take (issue #588: `"parts": ["thigh_r", "shin_r"]` where `leg_r` and `leg_l` both take the one `legs` layer) would put every pixel of that layer on its one limb, so each of its parts would hold a piece of both legs; when the set's layer holds more than one island (8-connected pixels with alpha above 8) of at least 1 % of its largest (issue #608: the ghost clean-up's own share; a smaller island is a speck, which goes with the island nearest it — the one holding the pixel centre nearest one of the speck's, none when two are equally near — and is never an island of its own), each segment part keeps the island its joints fall on — its bone's origin and the next segment's bone's origin, at the set's own bones, a joint on the island of a pixel whose square holds the point, and a joint on no island on the one island whose nearest pixel centre lies within the radius of the cap cut at that joint (`cap.radius`: an ankle just past the legwear's edge, on the shoe) — and drops the rest, once its limbs are cut and before the exclusion above, and `assemble` prints `LINT set "<set>" <part>: <layer part> holds <n> islands (8-connected, alpha above 8)[, and <s> speck(s) under 1 % of the largest (<f> px), each with the island nearest it], kept the one under <bone> [x, y] and <bone> [x, y][ (<e> px off it, within its cap's radius <r>)] (<k> px), dropped <m> (<d> px)` per part (k and d count the part's pixels above alpha 8, m the islands it lost one from, and `dropped none` when it lost none); a joint on no island with none or two within that radius, or with no cap cut at it (a limb's first joint), and a segment whose joints fall on two, are refused with `ASSEMBLE_ALT_LIMB_ISLAND` rather than guessed. A layer of one island — specks aside — may hold both legs over each other (a folded shin across the standing leg; issue #609): each of the set's segment parts then keeps the pixels nearer its own limb's segment line — the polyline of only its segments taking that source, their bone origins and the last segment's supplied tip or following segment's joint (issue #638) — than the other limb's, both in the set's pose, and gives the rest away, once its limbs are cut and before the exclusion above; a pixel whose two distances differ by 0.5 px or less (the overlap band: half a pixel, the reach by which a pixel centre is read as on a line) goes to the limb whose part there is drawn later in the base's draw order, and the `LINT set` line above counts what each part kept, gave and held in the band. The other limb stands where the set's `skeleton` places it — its keypoints place every limb bone of the body-18 table, the other leg's as well as the set's own (its `drawn` and `drawnLength` stay the covered bones') — and never at the base's place: a set that does not place it (a `drawn` set, which may not name a bone it does not cover, or a set with neither) is refused with `ASSEMBLE_ALT_LIMB_POSE` when its layer has art where the base draws that limb, and when it has none nothing says the layer holds it and the layer is cut as before; two limbs whose segment lines run closer than the limb's half-width over most of where their art can meet are refused with `ASSEMBLE_ALT_LIMB_OVERLAP`. A set that carries every limb of the layer is cut as before. For a subset set, where a limb's own source layer holds art (`alpha > 8`) under another layer of that run drawn in front (`alpha > 8`, by the projection's plan/depth order), the limb keeps its own layer pixels through projection, limb cutting, island/nearest-line assignment, base-footprint exclusion, fringe clearing and seam correction (issue #637). Those pixels are occluded, never counted as painting projection; no base footprint or painting colour replaces them. After source-art island/nearest-line assignment, a source-transparent cap pixel is assigned before protection, in both doors: its centre is compared against only the segments taking the recipient's source, at the set's supplied bones (ankle-to-toe for a separate foot source), with the existing 0.5 px overlap band and base draw order. A missing last endpoint is refused with `ASSEMBLE_ALT_LIMB_POSE`; an actual following joint may supply that endpoint, never a guessed point. An unposed other limb with base art beneath these cap pixels is likewise refused; without such overlap the existing compatible path retains the cap without inventing the other limb's pose. A pixel cleared by this assignment is never restored. `CAP_FROM_UPPER` records a copy made before assignment and alone proves no ownership: only a retained copy is protected beneath the upper segment, which is drawn over it. The source-art island selection itself is unchanged. Other retained cap pixels (from the layer or a supplied cap image) are protected under an actual front layer even where the lower source is transparent. Protection follows each assigned piece through exclusion, fringe clearing and seam correction; it never restores a pixel ownership removed. Cap pixels removed during ownership leave their original counts for `excluded_px`, just as excluded pixels do, so the cap ledger describes the written PNG. Target assignment reconciles this ledger even when there are no source-transparent cap candidates and when a direct caller does not request cover protection. Unprotected source pixels still obey the base-footprint exclusion. Missing limb/cap art is never extended or guessed. Base builds and uncovered, unexcluded sets keep their existing bytes. `skeleton` (a pose file path relative to the config's directory, `{"width": W, "height": H, "points": {…}}` with all 18 body-18 keypoints on the canvas, validated by the same rules as `generation.control.skeleton`: `CONFIG_FILE_PRESENT`, `CONFIG_IS_JSON`, `CONFIG_FIELD_TYPE`, `CONFIG_KEY_KNOWN`, `CONFIG_KEY_UNIQUE`, `CONFIG_POSE_CANVAS`, `CONFIG_POSE_KEYPOINTS`, `CONFIG_POSE_IN_CANVAS`) or `drawn` (`{<bone>: <worldDegrees>}`, each bone resolved against `bones`, `CONFIG_NAME_RESOLVES`) declares the posed angles the alternate was painted at (issue #465); when `skeleton` is given, `assemble` derives `drawn` from its 18 keypoints (filtered to covered bones on a subset set, with `drawn` overriding any bone named in both), records both `skeleton` (scaled by `assemble.rig_scale` to rig px) and `drawn` in `parts.json` `alternates` — and, when the skeleton placed the set's limb bones (issue #539), `drawnLength` (`{<bone>: <ratio>}`, each covered table bone's skeleton segment length over its base length, 6 places) and `registration` (`{offset: [dx, dy], scale}`: the similarity without rotation, about the canvas origin, that maps the skeleton's torso — the mean of its shoulders `r_shoulder`/`l_shoulder` to the mean of its hips `r_hip`/`l_hip`, read where the base declares the bone rooted there, `sleeve_*0`/`arm_*0` and `leg_*0` — onto those base bones' origins, 6 places), both also written to `sets.json`; the set's painting must be registered, its torso within 1 rig px and 1 % in scale of the base's, or the set is refused by name before any joint is cut (`ASSEMBLE_ALT_SKELETON_REGISTERED`, with the offset and scale the painting would need) — and the `rig` stage writes `<set>_*` region and mesh attachments in the bone-local frame of `poseRigBonesForDrawn(bones, drawn)` (weighting limb segments directly from `skeleton`'s joint endpoints when `skeleton` is present) and emits `drawn` in `sets.json` so `rig-pose` and `check --set <name>` / `--all-sets` pose the bones at `drawn` without rotating the already-posed art a second time. `front` (issue #664) lists covered limb segment parts the set draws on their **front slot** instead of the base slot: each must be in the set's `parts` and not its `hides`, and listed in some `config.limbs.<limb>.front.parts` (`CONFIG_SET_FRONT`); the set then maps `<part>_front` (never `<part>`) to `<set>_<part>` in `parts.json` and `sets.json` and hides `<part>` (and `<part>_still`), its #587 exclusion counts only base parts drawn after the front slot's target, and keying that part's set on a slot track is refused (`CONFIG_SET_FRONT_KEYED`) — *Front slots (issue #664)* below `layers` optionally maps covered, nonhidden output part names to layer names in their existing source run (issue #666); for example `"layers": {"upperarm_r": "author:raised", "forearm_r": "author:raised"}`. Limb cuts, caps, islands and base exclusions read the selected layer; the base plan stays unchanged. |
160
160
  | `assemble.head_face_underfill` | assemble, `assemble --propose-plan` | **authored**, optional (issue #492): `boolean` (`CONFIG_FIELD_TYPE` on any other). During head-face preparation, when both runs exist and `full:face` has at least `150` opaque run px (`PROPOSE_MIN_PX`), the stage maps `full:face` into the head canvas via `fullLayerToHead` and measures how much of its hole-filled silhouette (`alpha > 8`) is covered by `head:face` (`alpha > 8`). An explicit plan selecting `head:face` is refused when that layer covers less than `75 %` (`HEAD_FACE_COVERAGE_FLOOR`, measured `0.0 %..48.6 %` on hollow/omitted head runs vs `84.8 %..99.6 %` on clean head runs across the 4 public examples and 9-standee corpus), with `SEETHROUGH_HEAD_RUN_HOLLOW`, unless `head_face_underfill: true` is declared. When `head_face_underfill: true` is declared and `head:face` exists (`opaqueRunPx >= 150`), `fullLayerToHead(full:face)` is composited under `head:face` on the head canvas (`alpha = max(headAlpha, fullAlpha)`, RGB blended by `headAlpha / 255`) before `head:face` is placed in rig space (`underfill=<N>px(full:face)` on the `face` part log line and a `face: head_face_underfill composited …` note in `assemble --propose-plan`). The fill restores transparent pixels only and leaves the cut's own edge where it is — a hollow whose edge is not under hair stays visible; follow [Source before scissors](#source-before-scissors) for its source remedy. When `head:face` has fewer than `150` opaque pixels, `SEETHROUGH_HEAD_RUN_HOLLOW` still fires even under `head_face_underfill: true` because the head run omitted the face layer and cannot supply a jawline. The proposer instead selects `full:face` after this refusal when that full-run candidate passes the pixel floor and plausibility guards (issue #863); if it does not, the refusal remains. An assemble plan selecting `full:face` without `head:face` does not prepare the unused head face |
161
161
  | `assemble.yield_refused` | assemble | **authored**, optional boolean, default `false` (issue #819; other types: `CONFIG_FIELD_TYPE`). With `true`, an original front projection-core pixel refused at max-channel drift > `DRIFT_LIMIT` (90) can yield when its original source pixel is still opaque. Non-core rim pixels (0 < alpha < `CORE_ALPHA`, 250) on the same 8-connected part body can then yield too (issue #832). Connectivity reads the part support before clearing: the opaque border outside the eroded projection core connects the body to its rim but is not itself newly cleared. A separate rim island without a yielded core seed is unchanged. At every cleared pixel, the actual top-most opaque holder below it (alpha >= 250), after earlier yields, must have colour within 90 of the painting. A deeper matching part cannot bypass an intervening opaque mismatch. This setting also applies to alternate sets. A yielded pixel's alpha becomes 0 and its RGB is not repainted. Accepted own-core pixels in the same connected support within the original yielded core's Gaussian footprint (radius 4 rig pixels), with a matching opaque behind holder, finish to painting RGB while retaining alpha and ownership (issue #841); original refusals, protected samples and replacements are excluded. Away from that footprint projection is unchanged. Merge/ring replacements, samples explicitly kept by `keep_under_occluders`, and pixels outside a derived piece cannot connect a rim or be newly yielded. Front is relative to the matching part behind, so original refusals in another run are eligible even when a different part is the global top holder. The reading proceeds back to front against the current behind pixels; alpha changes do not repaint or create a new matching colour. `yieldReadings` optionally records `finishedProjection` (accepted samples whose RGB changed), and records `yieldedRim` as the rim subset of total `yielded`, skipped core merge/ring/nonopaque/no-match counts and original/final global holders; a yielded pixel also taken by projection closing is omitted from the written `source_px_taken` count. Existing cuts/patches and thresholds are unchanged. The `drift:` line reports `yielded N px` per affected part, even below the drift-body size bar; with the setting off it names `assemble.yield_refused: true` as the conditional remedy. Rebuild and inspect the newly exposed layer in motion before considering any cut; a mismatching or absent behind holder cannot be repaired by this setting. |
162
- | `assemble.keep_under_occluders` | assemble | **authored**, optional array of unique source part names from `assemble.plan`, default `[]` (issue #825). For each named part, keep its own See-through RGBA where the front-most covering part in the final draw stack has alpha greater than 0 and below `CORE_ALPHA` (250), including a cover in the other run. For an explicitly named part, original alpha 1–8 fringe removed by ghost cleanup also counts as source cover, within its final piece region: those pixels still contributed to the painting. Only original opaque own-layer samples are restored after source projection/closing and protected from later seam re-take; merged/rim, cap, under-fill and authored replacement pixels are excluded. This keeps their existing provenance and makes no holes; fully opaque cover and absent cover keep the old path. Cuts and limb pieces inherit the source part's protection. Unknown names: `CONFIG_NAME_RESOLVES`; duplicates: `CONFIG_PART_UNIQUE`; invalid shape: `CONFIG_FIELD_TYPE`. Inspect the part's own amodal layer first: this handle preserves its existing content and cannot complete a missing pixel — in particular, it does not close a motion opening inside the figure (`figure_openings` / [Openings inside the figure on undeclared layer pairs](#openings-inside-the-figure-on-undeclared-layer-pairs-issue-933)) where the lower layer has no opaque core under an opaque upper layer (measured with every `assemble.plan` part named in `keep_under_occluders`: `0` of `1` pair-animation warnings across `demo`'s eight animations closed, with `hair_back\|handwear_r` on `hop` frame `5` staying at `40` cells over `28` allowed in `38x70` world units at `2.517` world units/cell, while `scarf` reads `CLEAR` (`0` warnings) both with and without `keep_under_occluders`; use `assemble.extend_painting` when the lower part lacks opaque source material under an opaque upper cover). Example: `"keep_under_occluders": ["shin_r"]`. |
162
+ | `assemble.keep_under_occluders` | assemble | **authored**, optional array of unique source part names from `assemble.plan`, default `[]` (issue #825). For each named part, keep its own See-through RGBA where the front-most covering part in the final draw stack has alpha greater than 0 and below `CORE_ALPHA` (250), including a cover in the other run. Covers at raw alpha <= 8 are ghosts and are not kept under; a ghost-cleaned sample with final alpha 0 is absent cover and does not trigger restoration. Only original opaque own-layer samples are restored after source projection/closing and protected from later seam re-take; merged/rim, cap, under-fill and authored replacement pixels are excluded. This keeps their existing provenance and makes no holes; fully opaque cover and absent cover keep the old path. Cuts and limb pieces inherit the source part's protection. Unknown names: `CONFIG_NAME_RESOLVES`; duplicates: `CONFIG_PART_UNIQUE`; invalid shape: `CONFIG_FIELD_TYPE`. Inspect the part's own amodal layer first: this handle preserves its existing content and cannot complete a missing pixel — in particular, it does not close a motion opening inside the figure (`figure_openings` / [Openings inside the figure on undeclared layer pairs](#openings-inside-the-figure-on-undeclared-layer-pairs-issue-933)) where the lower layer has no opaque core under an opaque upper layer (measured with every `assemble.plan` part named in `keep_under_occluders`: `0` of `1` pair-animation warnings across `demo`'s eight animations closed, with `hair_back\|handwear_r` on `hop` frame `5` staying at `40` cells over `28` allowed in `38x70` world units at `2.517` world units/cell, while `scarf` reads `CLEAR` (`0` warnings) both with and without `keep_under_occluders`; use `assemble.extend_painting` when the lower part lacks opaque source material under an opaque upper cover). Example: `"keep_under_occluders": ["shin_r"]`. |
163
163
  | `assemble.editor_receipts` | assemble, build | **authored**, optional (issue #946): `{receipts: [{file, sha256, from_sha256, editor}], required?, trace_parts?}`. Each receipt records an image edited in an image editor; `file` (relative to the config's directory) must exist and hash to `sha256`, verified at assemble; `from_sha256` and `editor` are the author's declaration, held only to form. With `required: true`, every author-made layer, hidden-art layer, cut `under` and limb `cap` the build reads, alternate sets' runs included, needs a receipt whose `sha256` is its file's. With `trace_parts: true` (issue #947), every part's pixels must trace to a layer of the split or to a receipted image: the receipts are demanded as under `required`, and every shape the config draws through a part — a cut's `polygon`, `seethrough.arm_split`, a limb's `split.line`, a patch's `box`, a painting extension's `band` — is refused (`ASSEMBLE_PART_SOURCE`). Absent, no file is read and no byte moves. See [Editor receipts](#editor-receipts-assembleeditor_receipts-issue-946) and [Part sources](#part-sources-assembleeditor_receiptstrace_parts-issue-947). |
164
164
  | `limbs` | assemble (the cut and the caps), rig (through `regions`), check (`LIMB_ONE_BONE`) | **proposed** by `propose --keypoints` (issue #349), then checked: `{<limb>: {segments: [{part, from, bone}, {part, from, bone, joint, range?, cap?, edge?, cap_shape?, cut_band?, hybrid?}, …], split?, layout?, front?}}`, the upper segment first. The rule is *Limbs: cut at their joints* below the table. `part` is a new part (`CONFIG_PART_NAME`, `CONFIG_PART_UNIQUE` against the plan, patches, cuts and every other limb part); `from` a plan part or a cut's piece (`CONFIG_NAME_RESOLVES`) — the layer the segment's pixels come from, which is cut into the limb parts and is not itself made: a `meshes` or `regions` entry for it is `CONFIG_NAME_RESOLVES`, and the segments of one limb that take one part are consecutive (`CONFIG_LIMB_FROM_RUN`); `bone` a declared bone, each segment's the child of the one before (`CONFIG_LIMB_BONES_CHAIN`); the upper segment names no `joint`, `range`, `cap`, `edge`, `cap_shape` or `cut_band` (`CONFIG_KEY_KNOWN`), every other names its `joint` (`CONFIG_FIELD_PRESENT`) — the joint is its bone's origin; `range` is `[min, max]` degrees from rest with `min <= 0 <= max` (`CONFIG_LIMB_RANGE`), which `assemble` writes into the lower part's `parts.json` record and `check` poses the joint at — its two ends and its middle — reading the seam there (`SEAM_OVER_RANGE`, issue #360; rig-c needs no rotation limit); `cap` a PNG path relative to the config's directory (`CONFIG_FIELD_TYPE`); `edge` `"feather"` (issue #360), the one value it takes, and `cap_shape` `"disc"` (issue #360) or `"ball"` (issue #579) (`CONFIG_FIELD_TYPE` on any other) — the cut's geometry at that joint, *Limbs: cut at their joints* below; absent, the cut is hard and the cap the layer's half-disc of half the limb's width; `cut_band` a whole number of px, 1 or more (`CONFIG_FIELD_TYPE`), on a segment that takes the segment above's part — between two layers nothing is cut, so a band there is `CONFIG_KEY_KNOWN` — places the cut within that many px of the joint line (issue #360, *Limbs: cut at their joints*); absent, the cut is the joint line. Each limb part is attached like any part — `regions.<part>`, which must be the segment's `bone` (`CONFIG_LIMB_BONE`), or a mesh, which `check` holds to that bone alone (`LIMB_ONE_BONE`). With `limbs`, `assemble` reads `bones` too (`CONFIG_FIELD_PRESENT` without it). Absent, nothing is cut at a joint and no byte of any output moves. Optional `front` (issue #664), `{parts: [<own segment part>, …], after: "<produced part>"}`, gives each named segment a second slot `<part>_front`, empty at setup, placed after `after`'s slot family, for a gesture set to draw on (`CONFIG_FRONT_SCOPE`, `CONFIG_FRONT_NAME`, `CONFIG_FRONT_LAYOUT`; *Front slots (issue #664)* below) |
165
165
  | `bones` | rig; `propose --from-config` | **proposed** by `propose`, then corrected. A single bone `{name, parent, at, tip?}` or a chain `{chain, parent, points, tip, link_inherit?}` whose links are named `<chain>0 … <chain>n`. Parents come before children. In `rig.json` each link is **turned along its chain** — `rotation` is the direction from its origin to the next link's (the last link's to `tip`) and `length` that distance (issue #73), so a physics constraint added downstream finds a lever; under `--idle-keys ctl` the link's `<link>_ctl` carries the turn and the length and the link sits at local rotation 0 beneath it. A single bone with a `tip` is turned the same way, towards its tip, with that distance as its length (issue #239); a tip on the bone's own origin is refused (`RIG_TIP_DISTINCT`). The five face bones `eye_r`, `eye_l`, `brow_r`, `brow_l` and `mouth` (by name, when one has no tip of its own) are turned to the eye line — the line through the origins of `eye_r` and `eye_l` as `bones` writes them, read image-left to image-right, drawn when parts.json holds both an `eyewhite-r` and an `eyewhite-l` part — so the blink's `scaley` squashes across the eye line on a tilted head; move an eye bone and the line moves with it. With one eyewhite or none, or an eye bone missing, the rig stage's `face axis:` line says so and they keep the page's axes. A bone under a face bone keeps the face's axis. With the line, `rig.json` also declares `invariants.axes` — one entry, `"face"`, through `eye_r` and `eye_l`, holding the turned face bones (and their controls) — so rig-c's gate holds the build to the line; the line is the one rigc draws through the same two bones, so the tolerance is only the float floor — the largest gap the emitted (float32) bones have to it, rounded up to 6 places plus one 6-place unit — and the `face axis:` line prints it. With the line the rig stage also adds `head_up` (issue #250): a slotless bone under `head`, at head's origin, turned to the eye line + 90 degrees and as long as the eye midpoint lies from head's origin along that axis — the head's frame, which a rule that needs it reads; `head` keeps its own frame, so no key on it or under it changes meaning, and a config bone of that name is refused (`RIG_HEAD_UP_NAME_FREE`). A face bone with its own `tip` is held too (issue #258), in a second entry, `"face_tips"`, when its tip lies along the line within whole-pixel rounding — a tip written in whole pixels sits at most sqrt(2)/2 px off the point of the line it stands for, so its direction may sit up to asin((sqrt(2)/2) / length) degrees off — with its tolerance measured the same way; a tip further off is the bone's own axis, and the `face axis:` line names it with its gap and that bound. A failure is rig-c's `A51_BONES_LIE_ALONG_THEIR_DECLARED_AXIS` line, which names the bone and the fix (rig-c's `docs/AUTHORING.md` §3.7 and §5.2); with no line no entry is written and A51 reports SKIP. Every region on a turned bone is turned back, so the setup pose does not move. Any other single bone keeps world rotation 0; one whose parent is a link is turned back upright. A single bone may declare `inherit` (issue #348): what it takes from its parent's transform, one of rig-c's own mode names exactly as rig-c's table spells them — `normal`, `onlyTranslation`, `noRotationOrReflection`, `noScale`, `noScaleOrReflection` (rig-c's `RigBone.inherit`) — written to that bone in `rig.json` as declared; any other spelling, `"NoScale"` included (the runtime would fold its first letter; nothing here folds or maps), is refused (`CONFIG_BONE_INHERIT`), and a chain takes no `inherit` (`CONFIG_KEY_KNOWN`). A chain may instead declare `link_inherit` (issue #369), an object mapping its own expanded link names to those same modes, for example `"link_inherit": {"leg_r1": "noScale"}`. Only the named link changes; omitted links inherit normally. A key outside this chain is `CONFIG_NAME_RESOLVES`, with this chain's valid link names in the detail; a non-object or non-string mode is `CONFIG_FIELD_TYPE`, and another mode spelling is `CONFIG_BONE_INHERIT`. The mode is forwarded to the expanded link, or to its control under `--idle-keys ctl`, by the same rule as a single bone. This is an authored opt-in: `propose` does not add it. Its setup rotation is the turn from where rig-c's own poser puts the bone with no rotation of its own under that mode, so it still stands upright (or along its tip) at the setup pose. Where the idle gives the bone a `<bone>_ctl`, the mode goes on the control: the control is the bone the parent's rotation reaches, and the bone under it inherits normally, so the idle's keys moved onto the control still turn it. A foot that does not take its shin's rotation (`noRotationOrReflection` or `onlyTranslation`) keeps its shoe level while the leg is posed (`FEET_STAY_LEVEL`, §7); which mode is the author's. `noScale` keeps a shin or shoe's shape under a scaled parent but still takes the parent's rotation: a shoe that must also stay level needs a separate rotation constraint, for example a transform constraint from an unrotated bone. This does not change the proposed feet's existing inheritance or `FEET_STAY_LEVEL` default. An automatic mesh weighted through a bone with a mode other than `normal` gets no derived amplitude (its row names the bone) and no residual envelope (rig-c's `SKINNING_RANGE_UNSUPPORTED`). Absent, `rig.json` carries no `inherit` and no byte moves |
@@ -5741,7 +5741,7 @@ The body-root bar counts stock partitions `gapOpen` plus `ghostA` or `ghostB` ow
5741
5741
 
5742
5742
  **Why `fillHoles(a ∪ b)` and why warning (`WARN`), not a bar:** counting only cells inside the holes of the pair's own posed union (`fillHoles(a ∪ b)`) rather than of the whole figure (`fillHoles(frameUnion)`) eliminates all `36` third-part pocket warnings on `demo` (where a cheek-to-ponytail or arm-to-waist pocket is closed only by a third part such as the collar, shoulder or torso), so all five public examples read `CLEAR` (`0` warnings) on `idle`, and `reference-demo`, `reference-sample`, `scarf` and `wind` read `CLEAR` (`0` warnings) across every animation. The single remaining warning across all five public examples (`demo` `hair_back|handwear_r` on `hop` frames `[5-6]`, worst frame `5` at `t = 0.417s`: `found 40 cell(s), <= 28 cell(s) allowed in 38x70 world units at 2.517 world units/cell`) was visually inspected and is a false positive from a silhouette loop between `hair_back` and `handwear_r` themselves: on `demo`, `hair_back`'s right twin-tail curls inward behind the right arm and touches `handwear_r` both above (at the puff sleeve) and below (at the curled hair tip near the wrist), so `hair_back ∪ handwear_r` alone encloses a small background window between the forearm and the curling hair lock; when the character jumps in `hop`, that window shifts into the world cells that `hair_back` and `handwear_r` covered at `t = 0`. Because two layers with curved silhouettes can enclose a deliberate background loop between themselves during a jump, `figure_openings` is a **warning (`WARN`, never a bar)**.
5743
5743
 
5744
- **How `assemble.keep_under_occluders` relates:** `assemble.keep_under_occluders` only preserves a named lower part's original See-through RGB where the lower layer **already has** `alpha >= 250` (`CORE_ALPHA`) beneath a translucent front cover (`0 < alpha < 250`, or ghost-cleaned `alpha 1..8`). Where an upper layer was opaque at setup (`alpha >= 250`) or the lower layer had no opaque core under the upper layer (or where a silhouette loop shifts in world space), `keep_under_occluders` changes nothing: measured with every `assemble.plan` part named in `keep_under_occluders`, **0 of 1** pair-animation warnings on `demo` closed (`hair_back|handwear_r` on `hop` frame `5` stayed at `40` cells over `28` allowed in `38x70` world units at `2.517` world units/cell), and `scarf` read `CLEAR` (`0` warnings) both with and without `keep_under_occluders`. To close a genuine tear where the lower layer lacks opaque art under an opaque upper layer, use `assemble.extend_painting` (or adjust mesh weights / motion keys so the upper part does not slide off the lower part's boundary). **Diagnostic preview background:** `rigc render` composites diagnostic frame PNGs over `BACKGROUND = [232, 232, 232, 255]` (`#e8e8e8` light grey), which visually masks an `alpha == 0` sliver next to light cloth, pale hair or skin; reading `alpha == 0` on the posed skeleton's transparent composite catches the opening regardless of preview background colour.
5744
+ **How `assemble.keep_under_occluders` relates:** `assemble.keep_under_occluders` only preserves a named lower part's original See-through RGB where the lower layer **already has** `alpha >= 250` (`CORE_ALPHA`) beneath a translucent front cover (`0 < alpha < 250` in the final stack). Where an upper layer was opaque at setup (`alpha >= 250`) or the lower layer had no opaque core under the upper layer (or where a silhouette loop shifts in world space), `keep_under_occluders` changes nothing: measured with every `assemble.plan` part named in `keep_under_occluders`, **0 of 1** pair-animation warnings on `demo` closed (`hair_back|handwear_r` on `hop` frame `5` stayed at `40` cells over `28` allowed in `38x70` world units at `2.517` world units/cell), and `scarf` read `CLEAR` (`0` warnings) both with and without `keep_under_occluders`. To close a genuine tear where the lower layer lacks opaque art under an opaque upper layer, use `assemble.extend_painting` (or adjust mesh weights / motion keys so the upper part does not slide off the lower part's boundary). **Diagnostic preview background:** `rigc render` composites diagnostic frame PNGs over `BACKGROUND = [232, 232, 232, 255]` (`#e8e8e8` light grey), which visually masks an `alpha == 0` sliver next to light cloth, pale hair or skin; reading `alpha == 0` on the posed skeleton's transparent composite catches the opening regardless of preview background colour.
5745
5745
 
5746
5746
  ### compose
5747
5747
 
package/package.json CHANGED
@@ -1,6 +1,6 @@
1
1
  {
2
2
  "name": "spine-parts",
3
- "version": "2.14.1",
3
+ "version": "2.14.2",
4
4
  "description": "AI-authored 2D character parts from one anime painting and its See-through layer decomposition: measured parts, weighted-mesh rig specs, verified through rig-c before anything is written. A CLI for agents that cannot see the image.",
5
5
  "type": "module",
6
6
  "bin": {
package/src/assemble.ts CHANGED
@@ -4966,7 +4966,6 @@ function assembleParts(input: AssembleInput, targets?: ReadonlySet<string>, befo
4966
4966
  const patchIds = patches.map((_, i) => editId(`patches[${i}]`));
4967
4967
  const layerWriters = new Map<string, Int32Array>();
4968
4968
  const valueBaselines = new Map<string, ValueBaseline | null>();
4969
- const cleanedSoftCover = new Map<string, Mask>();
4970
4969
  // Extend-only rasters are still projected/merged, but are never emitted as own sources.
4971
4970
  const readKeys = new Set(sourcePlan.map(([, run, tag]) => `${run}:${tag}`));
4972
4971
  const rig = new Map<string, Raster>();
@@ -5040,17 +5039,6 @@ function assembleParts(input: AssembleInput, targets?: ReadonlySet<string>, befo
5040
5039
  }
5041
5040
  // Keep only samples that could equal a final opaque pixel; full raw and
5042
5041
  // prepared normalization temporaries end with this layer's callback.
5043
- // A low-alpha source fringe removed by cleanGhosts still contributed to
5044
- // the painting. Retain its source footprint only for explicit opt-in;
5045
- // final piece regions below still decide which side of a cut owns it.
5046
- if ((input.keepUnderOccluders?.length ?? 0) > 0 && raw !== null && preparedWriter === 0) {
5047
- let footprint: Mask | null = null;
5048
- for (let p = 0; p < W * H; p++) if (raw.data[p * 4 + 3] > 0 && raw.data[p * 4 + 3] <= OPAQUE_ALPHA_ABOVE && rigLayers[i].data[p * 4 + 3] === 0) {
5049
- footprint ??= newMask(W, H);
5050
- footprint.data[p] = 1;
5051
- }
5052
- if (footprint !== null) cleanedSoftCover.set(key, footprint);
5053
- }
5054
5042
  valueBaselines.set(key, raw === null ? null : compactValueBaseline(raw));
5055
5043
  return ids;
5056
5044
  });
@@ -5529,12 +5517,7 @@ function assembleParts(input: AssembleInput, targets?: ReadonlySet<string>, befo
5529
5517
  if (!enabled && (writer !== AW.sourceProjection || rgbaEqual(b.r.data, p * 4, raw, q))) continue;
5530
5518
  if (writer !== AW.sourceProjection && !rgbaEqual(b.r.data, p * 4, raw, q)) continue;
5531
5519
  for (let j = stack.length - 1; j > i; j--) {
5532
- let alpha = stack[j].image.data[p * 4 + 3];
5533
- const frontSlot = order[j];
5534
- if (alpha === 0 && enabled && !('patch' in frontSlot)) {
5535
- const cover = pieceAt(frontSlot).b;
5536
- if ((cover.region === null || cover.region.data[p] === 1) && cover.trace.from[p] < 0 && cover.trace.ring.data[p] === 0 && cleanedSoftCover.get(cover.key)?.data[p] === 1) alpha = OPAQUE_ALPHA_ABOVE;
5537
- }
5520
+ const alpha = stack[j].image.data[p * 4 + 3];
5538
5521
  if (alpha === 0) continue;
5539
5522
  if (alpha < CORE_ALPHA) {
5540
5523
  const different = !rgbaEqual(b.r.data, p * 4, raw, q);