sldeditor 0.0.2 → 0.1.0

package/dist/canvas/CanvasSvg.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"CanvasSvg.d.ts","sourceRoot":"","sources":["../../src/canvas/CanvasSvg.tsx"],"names":[],"mappings":"AAAA;;;;;;;;GAQG;AAyDH,wBAAgB,SAAS,4CAgRxB"}
+{"version":3,"file":"CanvasSvg.d.ts","sourceRoot":"","sources":["../../src/canvas/CanvasSvg.tsx"],"names":[],"mappings":"AAAA;;;;;;;;GAQG;AA0DH,wBAAgB,SAAS,4CAiRxB"}

package/dist/canvas/WireHandles.d.ts

@@ -0,0 +1,20 @@
+/**
+ * Edit affordances for the selected wire's polyline path.
+ *
+ * Two handle kinds:
+ *  - Vertex handle (filled): drag a corner; adjacent segments are
+ *    synced to stay axis-aligned (H stays H, V stays V).
+ *  - Midpoint handle (hollow): drag a segment perpendicular to its
+ *    axis; inserts two new corners so the segment shifts in parallel.
+ *
+ * Endpoints (path[0], path[n-1]) are not draggable — they're locked to
+ * terminals / bus anchors. A vertex with no remaining degree of freedom
+ * (both neighbors are endpoint-adjacent on perpendicular axes — i.e.
+ * the corner of a pure L) gets no handle: use the midpoint to add bends.
+ *
+ * The drag source is `internal.wireRenders[id].path` (works for both
+ * manual paths and auto-routed paths — first edit materializes the
+ * auto-routed path into `Wire.path`).
+ */
+export declare function WireHandles(): import("react/jsx-runtime").JSX.Element | null;
+//# sourceMappingURL=WireHandles.d.ts.map

package/dist/canvas/WireHandles.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"WireHandles.d.ts","sourceRoot":"","sources":["../../src/canvas/WireHandles.tsx"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;GAiBG;AAiBH,wBAAgB,WAAW,mDA0D1B"}

package/dist/compiler/auto-route.d.ts

@@ -1,4 +1,4 @@
-import { Wire, WireId } from '../model';
+import { Wire, WireEnd, WireId } from '../model';
 import { InternalModel } from './internal-model';
 type Pt = [number, number];
 export interface WireRoute {
@@ -6,5 +6,18 @@ export interface WireRoute {
     path: Pt[];
 }
 export declare function routeWire(wire: Wire, model: InternalModel): WireRoute | null;
+/**
+ * Resolve the current world coordinate of a wire endpoint.
+ *
+ * For terminal ends this is just the terminal's world position. For bus
+ * ends it's the projection of `approach` onto the bus axis (clamped to
+ * the bus span) — `approach` is the nearby interior point that indicates
+ * where the user wants the wire to meet the bus. With no approach, the
+ * bus center is returned.
+ *
+ * Used by `compile.ts` to rebase the first/last point of a user-edited
+ * `Wire.path` whenever the connected element has moved.
+ */
+export declare function wireEndWorld(end: WireEnd, approach: Pt | null, model: InternalModel): Pt | null;
 export {};
 //# sourceMappingURL=auto-route.d.ts.map

package/dist/compiler/auto-route.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"auto-route.d.ts","sourceRoot":"","sources":["../../src/compiler/auto-route.ts"],"names":[],"mappings":"AAAA;;;;;;;;GAQG;AAEH,OAAO,KAAK,EAAE,IAAI,EAAW,MAAM,EAAE,MAAM,UAAU,CAAC;AACtD,OAAO,KAAK,EAAE,aAAa,EAAE,MAAM,kBAAkB,CAAC;AAEtD,KAAK,EAAE,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC;AAE3B,MAAM,WAAW,SAAS;IACxB,MAAM,EAAE,MAAM,CAAC;IACf,IAAI,EAAE,EAAE,EAAE,CAAC;CACZ;AAED,wBAAgB,SAAS,CAAC,IAAI,EAAE,IAAI,EAAE,KAAK,EAAE,aAAa,GAAG,SAAS,GAAG,IAAI,CA6B5E"}
+{"version":3,"file":"auto-route.d.ts","sourceRoot":"","sources":["../../src/compiler/auto-route.ts"],"names":[],"mappings":"AAAA;;;;;;;;GAQG;AAEH,OAAO,KAAK,EAAE,IAAI,EAAE,OAAO,EAAE,MAAM,EAAE,MAAM,UAAU,CAAC;AACtD,OAAO,KAAK,EAAE,aAAa,EAAE,MAAM,kBAAkB,CAAC;AAEtD,KAAK,EAAE,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC;AAE3B,MAAM,WAAW,SAAS;IACxB,MAAM,EAAE,MAAM,CAAC;IACf,IAAI,EAAE,EAAE,EAAE,CAAC;CACZ;AAED,wBAAgB,SAAS,CAAC,IAAI,EAAE,IAAI,EAAE,KAAK,EAAE,aAAa,GAAG,SAAS,GAAG,IAAI,CA6B5E;AAeD;;;;;;;;;;;GAWG;AACH,wBAAgB,YAAY,CAC1B,GAAG,EAAE,OAAO,EACZ,QAAQ,EAAE,EAAE,GAAG,IAAI,EACnB,KAAK,EAAE,aAAa,GACnB,EAAE,GAAG,IAAI,CAgBX"}

package/dist/compiler/compile.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"compile.d.ts","sourceRoot":"","sources":["../../src/compiler/compile.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;GAYG;AAGH,OAAO,KAAK,EAGV,WAAW,EAOZ,MAAM,UAAU,CAAC;AAIlB,OAAO,EAKL,KAAK,aAAa,EAEnB,MAAM,kBAAkB,CAAC;AAyB1B,wBAAgB,OAAO,CAAC,OAAO,EAAE,WAAW,GAAG,aAAa,CA0N3D"}
+{"version":3,"file":"compile.d.ts","sourceRoot":"","sources":["../../src/compiler/compile.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;GAYG;AAGH,OAAO,KAAK,EAGV,WAAW,EAOZ,MAAM,UAAU,CAAC;AAKlB,OAAO,EAKL,KAAK,aAAa,EAEnB,MAAM,kBAAkB,CAAC;AAyB1B,wBAAgB,OAAO,CAAC,OAAO,EAAE,WAAW,GAAG,aAAa,CA6O3D"}

package/dist/components/ContextualToolbar.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"ContextualToolbar.d.ts","sourceRoot":"","sources":["../../src/components/ContextualToolbar.tsx"],"names":[],"mappings":"AAAA;;;;;;;;;GASG;AAYH,wBAAgB,iBAAiB,4CAoLhC"}
+{"version":3,"file":"ContextualToolbar.d.ts","sourceRoot":"","sources":["../../src/components/ContextualToolbar.tsx"],"names":[],"mappings":"AAAA;;;;;;;;;GASG;AAYH,wBAAgB,iBAAiB,4CAmNhC"}

package/dist/i18n/messages.d.ts

@@ -130,6 +130,8 @@ export declare const messages: {
         readonly 'ctx.deleteHintNode': "断开此电气节点上的所有连接（保留元件）";
         readonly 'ctx.deleteHintWire': "移除这一根连线（其它同节点连线保留）";
         readonly 'ctx.deleteHintElement': "移除选中元件及其连接的连线";
+        readonly 'ctx.resetWirePath': "恢复自动走线";
+        readonly 'ctx.resetWirePathHint': "清除手动调整的拐点，让连线回到自动路由";
         readonly 'menu.undo': "撤销";
         readonly 'menu.redo': "重做";
         readonly 'menu.cut': "剪切";
@@ -298,6 +300,8 @@ export declare const messages: {
         readonly 'ctx.deleteHintNode': "Disconnect every wire on this node (elements stay)";
         readonly 'ctx.deleteHintWire': "Remove only this wire (siblings on the same node stay)";
         readonly 'ctx.deleteHintElement': "Remove the selection and its wires";
+        readonly 'ctx.resetWirePath': "Reset to auto-route";
+        readonly 'ctx.resetWirePathHint': "Drop manual corners and let the router re-draw this wire";
         readonly 'menu.undo': "Undo";
         readonly 'menu.redo': "Redo";
         readonly 'menu.cut': "Cut";

package/dist/i18n/messages.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"messages.d.ts","sourceRoot":"","sources":["../../src/i18n/messages.ts"],"names":[],"mappings":"AAAA;;;;;;GAMG;AAEH,eAAO,MAAM,QAAQ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;CAqXX,CAAC;AAEX,MAAM,MAAM,MAAM,GAAG,MAAM,OAAO,QAAQ,CAAC;AAC3C,MAAM,MAAM,SAAS,GAAG,MAAM,CAAC,OAAO,QAAQ,CAAC,CAAC,IAAI,CAAC,CAAC"}
+{"version":3,"file":"messages.d.ts","sourceRoot":"","sources":["../../src/i18n/messages.ts"],"names":[],"mappings":"AAAA;;;;;;GAMG;AAEH,eAAO,MAAM,QAAQ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;CAyXX,CAAC;AAEX,MAAM,MAAM,MAAM,GAAG,MAAM,OAAO,QAAQ,CAAC;AAC3C,MAAM,MAAM,SAAS,GAAG,MAAM,CAAC,OAAO,QAAQ,CAAC,CAAC,IAAI,CAAC,CAAC"}

package/dist/model/index.d.ts

@@ -1,3 +1,4 @@
 export type { AnnotationId, Bus, BusId, BusLayout, DiagramFile, DiagramMeta, DiagramVersion, Element, ElementId, LabelMode, NodeId, ParamValue, PinName, Placement, TerminalRef, TextAnnotation, Wire, WireEnd, WireId, } from './types';
 export type { LibraryEntry, LibraryTerminal, LibraryStretchable, LibraryStateField, LibraryParamField, LibraryLabelAnchor, LibrarySource, Orientation, } from './library';
+export { normalizePath } from './wire-path';
 //# sourceMappingURL=index.d.ts.map

package/dist/model/index.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../src/model/index.ts"],"names":[],"mappings":"AAAA,YAAY,EACV,YAAY,EACZ,GAAG,EACH,KAAK,EACL,SAAS,EACT,WAAW,EACX,WAAW,EACX,cAAc,EACd,OAAO,EACP,SAAS,EACT,SAAS,EACT,MAAM,EACN,UAAU,EACV,OAAO,EACP,SAAS,EACT,WAAW,EACX,cAAc,EACd,IAAI,EACJ,OAAO,EACP,MAAM,GACP,MAAM,SAAS,CAAC;AAEjB,YAAY,EACV,YAAY,EACZ,eAAe,EACf,kBAAkB,EAClB,iBAAiB,EACjB,iBAAiB,EACjB,kBAAkB,EAClB,aAAa,EACb,WAAW,GACZ,MAAM,WAAW,CAAC"}
+{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../src/model/index.ts"],"names":[],"mappings":"AAAA,YAAY,EACV,YAAY,EACZ,GAAG,EACH,KAAK,EACL,SAAS,EACT,WAAW,EACX,WAAW,EACX,cAAc,EACd,OAAO,EACP,SAAS,EACT,SAAS,EACT,MAAM,EACN,UAAU,EACV,OAAO,EACP,SAAS,EACT,WAAW,EACX,cAAc,EACd,IAAI,EACJ,OAAO,EACP,MAAM,GACP,MAAM,SAAS,CAAC;AAEjB,YAAY,EACV,YAAY,EACZ,eAAe,EACf,kBAAkB,EAClB,iBAAiB,EACjB,iBAAiB,EACjB,kBAAkB,EAClB,aAAa,EACb,WAAW,GACZ,MAAM,WAAW,CAAC;AAEnB,OAAO,EAAE,aAAa,EAAE,MAAM,aAAa,CAAC"}

package/dist/model/wire-path.d.ts

@@ -0,0 +1,19 @@
+/**
+ * Wire path normalization. The Wire.path field accepts any polyline, but
+ * the editor's invariants assume the path is orthogonal (segments are H or V)
+ * and free of redundant points. This module enforces those invariants.
+ *
+ * normalizePath is called from `store.updateWirePath` (so user edits stay
+ * clean) and from the compiler when materializing a Wire.path into a
+ * WireRender (so legacy / persisted dirty paths render correctly).
+ *
+ * Operations:
+ *  - drop consecutive duplicates
+ *  - insert an L-corner on any diagonal segment (vertical-first, matching
+ *    the auto-router's convention)
+ *  - collapse collinear interior points (three points sharing an x or y)
+ */
+type Pt = [number, number];
+export declare function normalizePath(path: readonly Pt[]): Pt[];
+export {};
+//# sourceMappingURL=wire-path.d.ts.map

package/dist/model/wire-path.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"wire-path.d.ts","sourceRoot":"","sources":["../../src/model/wire-path.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;GAcG;AAEH,KAAK,EAAE,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC;AAI3B,wBAAgB,aAAa,CAAC,IAAI,EAAE,SAAS,EAAE,EAAE,GAAG,EAAE,EAAE,CAkDvD"}