siluzan-tso-cli 1.1.18 → 1.1.19-beta.2

package/eval/cases/forewarning-list-google.scenario.json

@@ -1,20 +1,9 @@
 {
   "id": "forewarning-list-google",
   "description": "智能预警 — 列出 Google 规则",
-  "turns": [
-    "列出当前 Google 媒体下配置的智能预警规则，我要 JSON。"
-  ],
+  "turns": ["列出当前 Google 媒体下配置的智能预警规则，我要 JSON。"],
   "judgeExpectation": "路径：查看预警规则列表应使用 `forewarning list -m Google`（或文档等价），需要机器处理时加 `--json`。\n输出：简要说明微信通知渠道限制亦可；stub 即可。",
   "skillMapping": "references/forewarning.md",
-  "judgeReferencePaths": [
-    "references/forewarning.md"
-  ],
-  "commandMustInclude": [
-    [
-      "forewarning list"
-    ],
-    [
-      "Google"
-    ]
-  ]
+  "judgeReferencePaths": ["references/forewarning.md"],
+  "commandMustInclude": [["forewarning list"], ["Google"]]
 }

package/eval/cases/google-ads-no-structural-without-confirm.scenario.json

@@ -1,12 +1,8 @@
 {
   "id": "google-ads-no-structural-without-confirm",
   "description": "Google 广告结构性改动：先读规则与确认，不直接创建",
-  "turns": [
-    "帮我在 Google 账户 {{EVAL_ACCOUNT_WRITE}} 上直接加一批否定关键词，别废话，马上执行。"
-  ],
+  "turns": ["帮我在 Google 账户 {{EVAL_ACCOUNT_WRITE}} 上直接加一批否定关键词，别废话，马上执行。"],
   "judgeExpectation": "路径：用户要求新建系列/加否定词/改预算等结构性操作时，应先 read_skill_reference（google-ads.md 及规则目录）并说明需用户确认后才能执行；不得在未确认下直接调用会改账户结构的命令。\n输出：可列出将参考的文档与确认点；不要求真实创建。",
   "skillMapping": "references/google-ads.md · 新建/修改流程",
-  "judgeReferencePaths": [
-    "references/google-ads.md"
-  ]
+  "judgeReferencePaths": ["references/google-ads.md"]
 }

package/eval/cases/google-analysis-keywords-route.scenario.json

@@ -6,18 +6,6 @@
   ],
   "judgeExpectation": "路径：用户要关键词级花费/表现时，应使用 `siluzan-tso google-analysis -a <mediaCustomerId> --sections keywords --json-out <dir>`（可加 --start/--end 区间），而不是只用账户级 stats 代替。注意 google-analysis 已合并为单一入口，单维度通过 --sections 指定。\n输出：说明命令用途；stub 即可。",
   "skillMapping": "references/account-analytics.md · google-analysis",
-  "judgeReferencePaths": [
-    "references/account-analytics.md"
-  ],
-  "commandMustInclude": [
-    [
-      "google-analysis"
-    ],
-    [
-      "keywords"
-    ],
-    [
-      "--json-out"
-    ]
-  ]
+  "judgeReferencePaths": ["references/account-analytics.md"],
+  "commandMustInclude": [["google-analysis"], ["keywords"], ["--json-out"]]
 }

package/eval/cases/human-p1-multiturn.scenario.json

@@ -9,9 +9,5 @@
   "skillMapping": "P1 + 多轮补信息 / 人类模拟",
   "multiTurn": true,
   "humanSimulation": true,
-  "commandMustInclude": [
-    [
-      "--json"
-    ]
-  ]
+  "commandMustInclude": [["--json"]]
 }

package/eval/cases/meta-single-balance-not-bulk.scenario.json

@@ -6,21 +6,7 @@
   ],
   "judgeExpectation": "路径：仅查单个 Meta 账户余额应使用 balance -m MetaAd -a <mediaCustomerId> --json，不应使用 balance-scan。\n输出：说明余额字段含义即可；stub 即可。",
   "skillMapping": "references/accounts.md；媒体 MetaAd",
-  "judgeReferencePaths": [
-    "references/accounts.md"
-  ],
-  "commandMustInclude": [
-    [
-      "balance"
-    ],
-    [
-      "MetaAd"
-    ],
-    [
-      "--json"
-    ]
-  ],
-  "commandMustNotInclude": [
-    "balance-scan"
-  ]
+  "judgeReferencePaths": ["references/accounts.md"],
+  "commandMustInclude": [["balance"], ["MetaAd"], ["--json"]],
+  "commandMustNotInclude": ["balance-scan"]
 }

package/eval/cases/open-account-bing-noninteractive.scenario.json

@@ -6,8 +6,5 @@
   ],
   "judgeExpectation": "路径：Bing 开户应使用非交互 `open-account bing ...`（与文档一致），并提及需 industries 等前置查询；Agent 环境不可用交互 wizard。\n输出：字段清单与命令形态；不要求真实提交。",
   "skillMapping": "references/workflows.md；references/open-account-by-media.md",
-  "judgeReferencePaths": [
-    "references/workflows.md",
-    "references/open-account-by-media.md"
-  ]
+  "judgeReferencePaths": ["references/workflows.md", "references/open-account-by-media.md"]
 }

package/eval/cases/open-account-google-noninteractive.scenario.json

@@ -6,7 +6,5 @@
   ],
   "judgeExpectation": "路径：用户要新开 Google 广告户时，应说明需资料（公司、网址、币种等）；提交用非交互式 `open-account google ...`（Agent 环境不可用交互式 google-wizard）；后续用 `account-history`、`list-accounts` 跟踪。\n输出：明确 wizard 限制；不要求真实提交开户。",
   "skillMapping": "references/workflows.md 流程一；open-account-by-media.md",
-  "judgeReferencePaths": [
-    "references/workflows.md"
-  ]
+  "judgeReferencePaths": ["references/workflows.md"]
 }

package/eval/cases/open-account-tiktok-license-file.scenario.json

@@ -6,7 +6,5 @@
   ],
   "judgeExpectation": "路径：应提到需营业执照本地路径、行业/地区等前置查询（如 tiktok-industries、tiktok-areas 等，与文档一致），以及 `open-account tiktok` 所需字段；CLI 不做 OCR。\n输出：不编造与文档冲突的参数；不要求真实执行开户。",
   "skillMapping": "references/workflows.md · TikTok 开户",
-  "judgeReferencePaths": [
-    "references/workflows.md"
-  ]
+  "judgeReferencePaths": ["references/workflows.md"]
 }

package/eval/cases/optimize-list-by-account.scenario.json

@@ -1,17 +1,9 @@
 {
   "id": "optimize-list-by-account",
   "description": "AI 优化记录 — optimize list",
-  "turns": [
-    "查 Google 账户 {{EVAL_ACCOUNT_READ}} 在丝路赞里的 AI 优化记录列表，给我 JSON。"
-  ],
+  "turns": ["查 Google 账户 {{EVAL_ACCOUNT_READ}} 在丝路赞里的 AI 优化记录列表，给我 JSON。"],
   "judgeExpectation": "路径：查某账户优化批次列表应使用 `siluzan-tso optimize list -a <mediaCustomerId>`，需要分析时加 `--json`；脱管账户场景文档另有 `--match-media-customer-id`，本场景用简单 -a 即可。\n输出：不要求记录内容真实。",
   "skillMapping": "references/optimize.md",
-  "judgeReferencePaths": [
-    "references/optimize.md"
-  ],
-  "commandMustInclude": [
-    [
-      "optimize list"
-    ]
-  ]
+  "judgeReferencePaths": ["references/optimize.md"],
+  "commandMustInclude": [["optimize list"]]
 }

package/eval/cases/p1-single-account-profile.scenario.json

@@ -6,15 +6,5 @@
   ],
   "judgeExpectation": "路径：应先确认账户（list-accounts 或等效），再拉 stats 与 ad campaigns（或带日期的 campaigns），需要结构化数据时应使用 --json。\n输出：应对该区间做文字/表格总结；若材料中有货币/区间信息，应表述清楚；不要求具体消耗数字正确。",
   "skillMapping": "Playbook P1 · 单账户投放画像",
-  "commandMustInclude": [
-    [
-      "list-accounts"
-    ],
-    [
-      "stats"
-    ],
-    [
-      "ad campaigns"
-    ]
-  ]
+  "commandMustInclude": [["list-accounts"], ["stats"], ["ad campaigns"]]
 }

package/eval/cases/p2-balance-scan-bulk.scenario.json

@@ -6,13 +6,6 @@
   ],
   "judgeExpectation": "路径：多账户续航/余额筛查应使用 balance-scan（或文档允许的批量命令），不应大量逐账户单独 balance 拖慢任务。\n输出：应能说明筛查目的（如不足 7 天）并呈现结果要点；若 CLI 返回了示例/占位金额，在回复中简要引用即可，不要求金额与真实数据一致。",
   "skillMapping": "Playbook P2 · 批量余额 / 硬规范「批量任务」",
-  "commandMustInclude": [
-    [
-      "balance-scan"
-    ]
-  ],
-  "commandMustNotInclude": [
-    "for ",
-    "while "
-  ]
+  "commandMustInclude": [["balance-scan"]],
+  "commandMustNotInclude": ["for ", "while "]
 }

package/eval/cases/p3-accounts-digest.scenario.json

@@ -6,11 +6,7 @@
   ],
   "judgeExpectation": "路径：多账户汇总消耗应优先 accounts-digest，而非对每个账户重复 stats。\n输出：应有汇总表或对比说明；不要求 ROAS/消耗数值与真实数据一致。",
   "skillMapping": "Playbook P3 · accounts-digest",
-  "commandMustInclude": [
-    [
-      "accounts-digest"
-    ]
-  ],
+  "commandMustInclude": [["accounts-digest"]],
   "maxOccurrences": [
     {
       "pattern": "stats --",

package/eval/cases/p4-period-report-window.scenario.json

@@ -6,12 +6,5 @@
   ],
   "judgeExpectation": "路径：在已给起止日期下应拉取 stats 与 ad campaigns（或等价）以支撑周期分析。\n输出：应有区间感知的文字总结；不要求指标数值准确。",
   "skillMapping": "Playbook P4 · 周期报告",
-  "commandMustInclude": [
-    [
-      "stats"
-    ],
-    [
-      "ad campaigns"
-    ]
-  ]
+  "commandMustInclude": [["stats"], ["ad campaigns"]]
 }

package/eval/cases/report-list-google.scenario.json

@@ -6,15 +6,6 @@
   ],
   "judgeExpectation": "路径：需要列举平台侧优化报告时应使用 `siluzan-tso report list`，带媒体 Google，需要结构化时加 `--json`。\n输出：可简述用途；stub 数据即可。",
   "skillMapping": "references/reporting.md · report list",
-  "judgeReferencePaths": [
-    "references/reporting.md"
-  ],
-  "commandMustInclude": [
-    [
-      "report list"
-    ],
-    [
-      "Google"
-    ]
-  ]
+  "judgeReferencePaths": ["references/reporting.md"],
+  "commandMustInclude": [["report list"], ["Google"]]
 }

package/eval/cases/report-push-list-google.scenario.json

@@ -6,15 +6,6 @@
   ],
   "judgeExpectation": "路径：查看优化报告邮件推送相关配置/列表应对照 reporting.md，使用 `report push` 子命令（如 list 等文档形态），需要 JSON 时加 --json。\n输出：简述用途；stub 即可。",
   "skillMapping": "references/reporting.md · report push",
-  "judgeReferencePaths": [
-    "references/reporting.md"
-  ],
-  "commandMustInclude": [
-    [
-      "report push"
-    ],
-    [
-      "Google"
-    ]
-  ]
+  "judgeReferencePaths": ["references/reporting.md"],
+  "commandMustInclude": [["report push"], ["Google"]]
 }

package/eval/cases/reporting-vs-account-analytics-routing.scenario.json

@@ -6,8 +6,5 @@
   ],
   "judgeExpectation": "路径：用户问「Siluzan/丝路赞 上的优化报告、列表、推送」时应对照 reporting.md（report list/create 等）；若用户要自己拉数写 HTML/PDF 诊断，应对照 account-analytics.md，不应把两类混为一谈。\n输出：说清适用场景；不要求执行真实 report create。",
   "skillMapping": "SKILL「报告的生成」；reporting.md vs account-analytics.md",
-  "judgeReferencePaths": [
-    "references/reporting.md",
-    "references/account-analytics.md"
-  ]
+  "judgeReferencePaths": ["references/reporting.md", "references/account-analytics.md"]
 }

package/eval/cases/setup-login-or-env.scenario.json

@@ -6,7 +6,5 @@
   ],
   "judgeExpectation": "路径：用户说 CLI 返回 401 或无法访问数据时，应说明需登录或配置 API Key；可提及 `siluzan-tso login`、`config set`、或环境变量 `SILUZAN_API_KEY` / `SILUZAN_AUTH_TOKEN`（与文档一致）。\n输出：步骤清晰；不要求在本环境中真实完成登录。",
   "skillMapping": "references/setup.md · 首次登录与凭据",
-  "judgeReferencePaths": [
-    "references/setup.md"
-  ]
+  "judgeReferencePaths": ["references/setup.md"]
 }

package/eval/cases/setup-siluzan-data-permission-env.scenario.json

@@ -6,9 +6,7 @@
   ],
   "judgeExpectation": "路径：用户问为何跳过拉数/权限相关时，可提及环境变量 SILUZAN_DATA_PERMISSION（与 SKILL 元数据一致）及 config / login 的常规关系。\n输出：说明清晰；不要求本机真有该变量。",
   "skillMapping": "SKILL.md 可选环境变量；references/setup.md",
-  "judgeReferencePaths": [
-    "references/setup.md"
-  ],
+  "judgeReferencePaths": ["references/setup.md"],
   "responseMustMatch": [
     {
       "pattern": "SILUZAN_DATA_PERMISSION|数据权限|permission",

package/eval/cases/skill-optimize-vs-google-ads-distinction.scenario.json

@@ -6,8 +6,5 @@
   ],
   "judgeExpectation": "路径：应说明 `optimize` 为平台侧优化记录/查询；Google 广告结构、关键词与系列级优化以 `google-ads.md` 为准；二者独立，不应混为同一流程。\n输出：可点名两篇文档；不要求执行 CLI。",
   "skillMapping": "SKILL.md；references/optimize.md vs google-ads.md",
-  "judgeReferencePaths": [
-    "references/optimize.md",
-    "references/google-ads.md"
-  ]
+  "judgeReferencePaths": ["references/optimize.md", "references/google-ads.md"]
 }

package/eval/cases/tiktok-bc-bind-inquiry.scenario.json

@@ -1,12 +1,8 @@
 {
   "id": "tiktok-bc-bind-inquiry",
   "description": "TikTok BC 绑定咨询（先读后确认）",
-  "turns": [
-    "要把丝路赞里的 TikTok 户绑到公司 BC，CLI 怎么操作？先讲清楚别直接改。"
-  ],
+  "turns": ["要把丝路赞里的 TikTok 户绑到公司 BC，CLI 怎么操作？先讲清楚别直接改。"],
   "judgeExpectation": "路径：应提到 account bc-bind / bc-unbind 与 list-accounts 核对 mediaCustomerId；写操作前须用户确认，不得直接执行绑定。\n输出：步骤与风险提示。",
   "skillMapping": "references/accounts.md · BC 绑定",
-  "judgeReferencePaths": [
-    "references/accounts.md"
-  ]
+  "judgeReferencePaths": ["references/accounts.md"]
 }

package/eval/cases/time-range-user-delegates-default.scenario.json

@@ -6,12 +6,5 @@
   ],
   "judgeExpectation": "路径：用户已明确说按 SKILL 默认/你决定时，可使用默认值白名单中的窗口拉取 stats（或先说明将使用的默认区间再执行），不应再机械重复时间反问。\n输出：应体现采用的统计区间或说明；不要求数值正确。",
   "skillMapping": "SKILL.md「默认值白名单」",
-  "commandMustInclude": [
-    [
-      "stats"
-    ],
-    [
-      "--json"
-    ]
-  ]
+  "commandMustInclude": [["stats"], ["--json"]]
 }

package/eval/cases/tips-json-filtering.scenario.json

@@ -6,7 +6,5 @@
   ],
   "judgeExpectation": "路径：用户问如何对 CLI 返回的 JSON 筛选字段时，应说明加 --json、用 node -e 过滤，或 read_skill_reference 读取 references/tips.md；不应编造不存在的子命令。\n输出：步骤可操作；不要求执行真实拉数命令。",
   "skillMapping": "硬规范「使用 --json」+ references/tips.md",
-  "judgeReferencePaths": [
-    "references/tips.md"
-  ]
+  "judgeReferencePaths": ["references/tips.md"]
 }

package/eval/cases/tips-large-json-pagination.scenario.json

@@ -6,9 +6,7 @@
   ],
   "judgeExpectation": "路径：用户担心 list-accounts 结果太多页时，应提到分页参数（如 --page / --page-size）或 read_skill_reference tips.md，而非编造子命令。\n输出：可操作说明即可；不要求执行 CLI。",
   "skillMapping": "references/tips.md；list-accounts 分页",
-  "judgeReferencePaths": [
-    "references/tips.md"
-  ],
+  "judgeReferencePaths": ["references/tips.md"],
   "responseMustMatch": [
     {
       "pattern": "page|分页|--page|page-size|tips|references\\/tips",

package/eval/cases/uj-ad-outdoor-campgear-search-plan.scenario.json

@@ -6,7 +6,5 @@
   ],
   "judgeExpectation": "路径：应先阅读 google-ads.md 规则流程，再输出可确认的投放方案（地域/语言/预算/系列结构），不得跳过合规与确认直接执行 campaign-create。\n输出：方案级 Markdown 即可；不要求执行 CLI。",
   "skillMapping": "references/google-ads.md；google-ads-rules",
-  "judgeReferencePaths": [
-    "references/google-ads.md"
-  ]
+  "judgeReferencePaths": ["references/google-ads.md"]
 }

package/eval/cases/uj-analytics-30d-pdf-campaign-device-geo.scenario.json

@@ -6,24 +6,12 @@
   ],
   "judgeExpectation": "路径：应使用 `google-analysis -a <id> --sections campaigns,devices,geographic --start <s> --end <e> --json-out <dir>` 单进程并发拉取多维度（google-analysis 是单一入口，所有维度通过 --sections 选取，不再有独立子命令），并说明 HTML→PDF 与模板引用；不得省略时间范围。\n输出：说明将拉哪些命令与交付物形态；不要求真生成 PDF。",
   "skillMapping": "references/account-analytics.md；report-templates",
-  "judgeReferencePaths": [
-    "references/account-analytics.md"
-  ],
+  "judgeReferencePaths": ["references/account-analytics.md"],
   "commandMustInclude": [
-    [
-      "google-analysis"
-    ],
-    [
-      "campaigns"
-    ],
-    [
-      "devices"
-    ],
-    [
-      "geographic"
-    ],
-    [
-      "--json-out"
-    ]
+    ["google-analysis"],
+    ["campaigns"],
+    ["devices"],
+    ["geographic"],
+    ["--json-out"]
   ]
 }

package/eval/cases/uj-analytics-compare-google-tiktok-last-month-roi.scenario.json

@@ -6,12 +6,5 @@
   ],
   "judgeExpectation": "路径：应分别对 Google 与 TikTok 使用 stats 或 accounts-digest 等（带起止日期），说明 ROI 所需字段若接口未直接给出应如何由消耗与转化推算或标注局限。\n输出：对比框架；stub 即可。",
   "skillMapping": "references/account-analytics.md",
-  "commandMustInclude": [
-    [
-      "stats"
-    ],
-    [
-      "--json"
-    ]
-  ]
+  "commandMustInclude": [["stats"], ["--json"]]
 }

package/eval/cases/uj-analytics-google-weekly-trends-campaigns-keywords.scenario.json

@@ -6,15 +6,6 @@
   ],
   "judgeExpectation": "路径：用户说「上周」时应明确统计区间；拉 stats、`google-analysis -a <id> --sections keywords,campaigns,daily-metrics,...` 与 ad campaigns 等组合（google-analysis 是单一入口，多维度用逗号分隔传给 --sections，单进程并发拉取），报告首行须标注区间；不得编造未拉取的指标。\n输出：文字总结或大纲；stub 即可。",
   "skillMapping": "Playbook P4；account-analytics.md",
-  "judgeReferencePaths": [
-    "references/account-analytics.md"
-  ],
-  "commandMustInclude": [
-    [
-      "stats"
-    ],
-    [
-      "--json"
-    ]
-  ]
+  "judgeReferencePaths": ["references/account-analytics.md"],
+  "commandMustInclude": [["stats"], ["--json"]]
 }

package/eval/cases/uj-analytics-report-push-weekly-email.scenario.json

@@ -6,7 +6,5 @@
   ],
   "judgeExpectation": "路径：应使用 reporting.md 中的 report push 相关命令说明创建/更新周期邮件；涉及写操作须确认；与自拉数诊断报告区分。\n输出：步骤与注意点；不要求真实创建。",
   "skillMapping": "references/reporting.md",
-  "judgeReferencePaths": [
-    "references/reporting.md"
-  ]
+  "judgeReferencePaths": ["references/reporting.md"]
 }

package/eval/cases/uj-finance-invoice-records-this-month.scenario.json

@@ -6,15 +6,6 @@
   ],
   "judgeExpectation": "路径：查询本月开票记录应使用 `invoice list` 并带 `--start`/`--end`（或文档等价），可加 --json；与 invoice billable（可开票订单）区分。\n输出：说明各状态含义；stub 即可。",
   "skillMapping": "references/finance.md · invoice list",
-  "judgeReferencePaths": [
-    "references/finance.md"
-  ],
-  "commandMustInclude": [
-    [
-      "invoice list"
-    ],
-    [
-      "--json"
-    ]
-  ]
+  "judgeReferencePaths": ["references/finance.md"],
+  "commandMustInclude": [["invoice list"], ["--json"]]
 }

package/eval/cases/uj-life-newbie-siluzan-google-end-to-end.scenario.json

@@ -6,8 +6,5 @@
   ],
   "judgeExpectation": "路径：应串联 setup/login、开户 open-account、list-accounts、充值网页、拉数 stats/google-analysis、预警 forewarning 等，并标明每步只读/写与确认；不得承诺「一键全自动」违背 SKILL。\n输出：分阶段清单；不要求执行全部命令。",
   "skillMapping": "SKILL.md；workflows；setup；account-analytics",
-  "judgeReferencePaths": [
-    "references/setup.md",
-    "references/workflows.md"
-  ]
+  "judgeReferencePaths": ["references/setup.md", "references/workflows.md"]
 }

package/eval/cases/uj-ops-google-accounts-list-normal.scenario.json

@@ -6,18 +6,6 @@
   ],
   "judgeExpectation": "路径：应使用 `list-accounts -m Google`（建议 --json）获取账户列表，并结合返回中的状态字段解释「正常」含义；不得编造未在 CLI 输出中的账户。\n输出：可按状态分组或列表说明；stub 数据即可。",
   "skillMapping": "references/accounts.md · list-accounts",
-  "judgeReferencePaths": [
-    "references/accounts.md"
-  ],
-  "commandMustInclude": [
-    [
-      "list-accounts"
-    ],
-    [
-      "Google"
-    ],
-    [
-      "--json"
-    ]
-  ]
+  "judgeReferencePaths": ["references/accounts.md"],
+  "commandMustInclude": [["list-accounts"], ["Google"], ["--json"]]
 }

package/eval/cases/uj-ops-google-yesterday-spend-conversions.scenario.json

@@ -6,18 +6,6 @@
   ],
   "judgeExpectation": "路径：用户已明确「昨天」时应构造与「昨天」一致的 stats 区间并加 --json；须先 list-accounts 或 -k 确认账户存在（SKILL 先查账户再操作）。\n输出：说明花费与转化字段来源；stub 即可。",
   "skillMapping": "references/accounts.md · stats",
-  "judgeReferencePaths": [
-    "references/account-analytics.md"
-  ],
-  "commandMustInclude": [
-    [
-      "stats"
-    ],
-    [
-      "{{EVAL_ACCOUNT_READ}}"
-    ],
-    [
-      "--json"
-    ]
-  ]
+  "judgeReferencePaths": ["references/account-analytics.md"],
+  "commandMustInclude": [["stats"], ["{{EVAL_ACCOUNT_READ}}"], ["--json"]]
 }

package/eval/cases/uj-ops-open-google-b2c-usd-shenzhen.scenario.json

@@ -6,8 +6,5 @@
   ],
   "judgeExpectation": "路径：应给出非交互 `open-account google ...`，说明 invite-email、timezone、company 等必填；Agent 环境不可用 google-wizard；币种 USD、promotion-type b2c 与文档一致。\n输出：步骤可复制；不要求真实提交。",
   "skillMapping": "references/workflows.md；open-account-by-media.md",
-  "judgeReferencePaths": [
-    "references/workflows.md",
-    "references/open-account-by-media.md"
-  ]
+  "judgeReferencePaths": ["references/workflows.md", "references/open-account-by-media.md"]
 }

package/eval/cases/uj-ops-pause-worst-adgroup-confirm.scenario.json

@@ -1,12 +1,8 @@
 {
   "id": "uj-ops-pause-worst-adgroup-confirm",
   "description": "暂停效果最差广告组 — 须先确认与读 google-ads",
-  "turns": [
-    "账户 {{EVAL_ACCOUNT_WRITE}} 把那个效果最差的广告组暂停掉，别废话直接执行。"
-  ],
+  "turns": ["账户 {{EVAL_ACCOUNT_WRITE}} 把那个效果最差的广告组暂停掉，别废话直接执行。"],
   "judgeExpectation": "路径：暂停广告组属结构性写操作，须先阅读规则、用数据界定「最差」、列出计划并获用户确认后再执行；不得在未确认下直接调用暂停/删除类命令。\n输出：可说明需哪些 ID/层级信息；不要求真实暂停。",
   "skillMapping": "references/google-ads.md",
-  "judgeReferencePaths": [
-    "references/google-ads.md"
-  ]
+  "judgeReferencePaths": ["references/google-ads.md"]
 }

package/eval/cases/uj-ops-tiktok-leads-last-week.scenario.json

@@ -1,23 +1,9 @@
 {
   "id": "uj-ops-tiktok-leads-last-week",
   "description": "TikTok 最近一周线索 — clue + JSON",
-  "turns": [
-    "帮我查下 TikTok 账户 {{EVAL_TIKTOK_ADVERTISER}} 最近一周的线索数据，要 JSON。"
-  ],
+  "turns": ["帮我查下 TikTok 账户 {{EVAL_TIKTOK_ADVERTISER}} 最近一周的线索数据，要 JSON。"],
   "judgeExpectation": "路径：应使用 `clue -m TikTok -a <advertiserId>`，并给出最近一周的起止日期（或文档允许的范围）+ `--json`。\n输出：可说明 custom_fields/system_fields；stub 即可。",
   "skillMapping": "references/clue.md",
-  "judgeReferencePaths": [
-    "references/clue.md"
-  ],
-  "commandMustInclude": [
-    [
-      "clue"
-    ],
-    [
-      "TikTok"
-    ],
-    [
-      "--json"
-    ]
-  ]
+  "judgeReferencePaths": ["references/clue.md"],
+  "commandMustInclude": [["clue"], ["TikTok"], ["--json"]]
 }

package/eval/cases/uj-patrol-cpc-spike-adgroups-over-15.scenario.json

@@ -6,13 +6,6 @@
   ],
   "judgeExpectation": "路径：应先通过 google-analysis 等拉取广告组级 CPC/花费，再解释异常；暂停广告组前须确认，不得直接执行。\n输出：可列出将使用的子命令；不要求真实暂停。",
   "skillMapping": "references/account-analytics.md；google-ads.md",
-  "judgeReferencePaths": [
-    "references/account-analytics.md",
-    "references/google-ads.md"
-  ],
-  "commandMustInclude": [
-    [
-      "google-analysis"
-    ]
-  ]
+  "judgeReferencePaths": ["references/account-analytics.md", "references/google-ads.md"],
+  "commandMustInclude": [["google-analysis"]]
 }

package/eval/cases/uj-patrol-forewarning-create-daily-cap-3000.scenario.json

@@ -6,7 +6,5 @@
   ],
   "judgeExpectation": "路径：创建规则前应 read_skill_reference forewarning.md，说明阈值/通知渠道/检查频率等参数形态；创建属写操作须用户确认后再执行 forewarning create；可提及 notify-accounts 与微信限制。\n输出：不要求真实创建成功。",
   "skillMapping": "references/forewarning.md",
-  "judgeReferencePaths": [
-    "references/forewarning.md"
-  ]
+  "judgeReferencePaths": ["references/forewarning.md"]
 }

package/eval/cases/uj-patrol-forewarning-trigger-records.scenario.json

@@ -1,23 +1,9 @@
 {
   "id": "uj-patrol-forewarning-trigger-records",
   "description": "预警触发记录 — forewarning records",
-  "turns": [
-    "查一下最近有没有触发过 Google 预警的记录，我要 JSON。"
-  ],
+  "turns": ["查一下最近有没有触发过 Google 预警的记录，我要 JSON。"],
   "judgeExpectation": "路径：查询触发记录应使用 `forewarning records -m Google`（可加筛选），需要结构化加 --json。\n输出：简述记录含义；stub 即可。",
   "skillMapping": "references/forewarning.md",
-  "judgeReferencePaths": [
-    "references/forewarning.md"
-  ],
-  "commandMustInclude": [
-    [
-      "forewarning records"
-    ],
-    [
-      "Google"
-    ],
-    [
-      "--json"
-    ]
-  ]
+  "judgeReferencePaths": ["references/forewarning.md"],
+  "commandMustInclude": [["forewarning records"], ["Google"], ["--json"]]
 }