signalk-pypilot-newui 2.2.1 → 2.3.0

package/CHANGELOG.md

@@ -1,5 +1,162 @@
 # Changelog
 
+## 2.3.0 — 2026-08-31 — Rev130..Rev137
+
+Feature batch on top of 2.2.x. Themes: make the visor speak the user's
+language end-to-end (Doctor findings, alarm banners and TTS voice
+included), turn the Setup launcher into an at-a-glance dashboard,
+give Tune the same profile-fork discipline the Doctor already had,
+and make Sensor Quality something the skipper can silence for
+sensors that aren't on this boat.
+
+### English
+
+**Added**
+
+- **Chart tab — interactive hover** (Rev129) — freeze the auto-refresh
+  and read the exact value of every band at any point in the history
+  window by hovering the graph. Y-axis ticks (min / mid / max) now
+  sit inside the right gutter for each band.
+- **Tune tab — per-slider restore + profile fork prompt** (Rev129,
+  Rev132..Rev134) — every gain slider gets a ↺ button that snaps
+  back to the frozen baseline captured when you unlocked the panel.
+  On the first change of an unlock session a modal asks whether to
+  keep the tweaks in the current profile, save them in a new
+  `tune-YYYYMMDD-HHMM` fork (mirroring the Doctor pattern), or
+  Cancel and revert the change entirely.
+- **Setup launcher — live status chips on every tile** (Rev130..Rev135)
+  — Pypilot Connection shows `host:port`, Language shows the active
+  locale, Calibration shows the timestamp of the last slider
+  adjustment (with a `Reset historial` button on the card), Signal K
+  Sentences shows the count of published SK paths out of the plugin
+  catalog total, and Remote Control Console reports whether SSH
+  creds are stored.
+- **Sensor Quality — per-row Ignore / Restore** (Rev134..Rev135) —
+  the chip now also counts "missing" sensors (a watched path that
+  has never emitted a delta) into the failure tally, and each row
+  gains an Ignore / Restore button so a sensor you don't have on
+  this boat (rudder without a rudder feedback, temp probe absent,
+  ...) stops turning the chip red. Persisted per-browser.
+- **Nav bar slide-down gesture** (Rev129) — the counterpart to the
+  existing slide-up hide; drag from the top of the visor to bring
+  the tab bar back.
+- **Doctor — Hide button always visible + i18n findings**
+  (Rev135..Rev136) — the Descartar / Ocultar button stays visible
+  even after a suggestion has been applied so you can clear stale
+  advice from the list. Hidden suggestions also drop off the tile
+  chip's counter so the card goes back to `sano` once you've cleared
+  everything. Backend now emits i18n keys + args for findings and
+  summary so the whole Doctor panel reads in the active language.
+- **Alarm engine i18n** (Rev135..Rev136) — the seven built-in alarm
+  rules (heading-deviation, unable-to-steer, servo-overcurrent,
+  servo-temp-high, low-voltage, sensor-lost, pypilot-disconnected)
+  now render banners and speak the message in the active language
+  (EN / ES / DE / FR). The backend still publishes the English
+  notification message on `notifications.autopilot.*` for
+  KIP / WilhelmSK compatibility.
+- **Info tab — English classic-UI link fix** (Rev129) — the
+  hardcoded Spanish string "Interfaz clasica pypilot" that leaked
+  into every language moved to a proper i18n key with `{host}` /
+  `{port}` interpolation.
+- **Remote Control Console — TinyPilot defaults** (Rev136) — the
+  tile no longer wears its emergency red frame; the SSH user field
+  is pre-filled with the TinyPilot default (`tc`) and a hint spells
+  out that the default password is `tc` too, so the setup is a
+  two-click job on a stock TinyPilot.
+- **Better DE / FR coverage** (Rev134..Rev136) — Setup tile titles,
+  calibration strings, Tune fork modal, chip labels, Doctor summary
+  / findings and alarm messages now translate in Deutsch and
+  Français instead of falling back to English.
+
+**Changed**
+
+- **All six screenshots refreshed** to match the current UI
+  (Control rose with the Gota Chain arrow layout, Chart Trip Stats,
+  Tune with per-slider reset, Setup launcher chips, Race timer,
+  Info panel).
+
+### Español
+
+**Añadido**
+
+- **Chart — cursor sobre gráficas** — al pasar el dedo o el ratón
+  sobre una gráfica se congela el refresh y aparece una línea
+  vertical + tooltip con `-X.Xs` y el valor de cada banda en ese
+  punto. Escala Y (min / mid / max) por banda en el margen derecho.
+- **Tune — botón ↺ por slider + prompt de perfil** — cada gain trae
+  un ↺ que vuelve al valor previo (el que había al desbloquear). El
+  primer cambio tras unlock lanza un modal preguntando si guardar
+  en el perfil actual, crear un nuevo `tune-YYYYMMDD-HHMM` (mismo
+  patrón que Doctor) o cancelar y revertir.
+- **Setup — chips vivos en cada tile** — TinyPilot con host:port,
+  idioma actual, fecha del último ajuste de calibración (con botón
+  Reset historial), contador de sentencias SK publicadas frente al
+  total del catálogo del plugin, y aviso de SSH configurado en
+  Remote Control Console.
+- **Sensor Quality — Ignorar / Restaurar por fila** — los sensores
+  que nunca han reportado también cuentan en el ✕, y cada fila con
+  problema tiene ahora un botón Ignorar (persistente en el
+  navegador) para no volver a teñir el chip por un sensor que no
+  hay en el barco.
+- **Slide desde arriba para mostrar la barra de pestañas** — vuelta
+  atrás del slide hacia arriba que ya escondía la nav.
+- **Doctor — botón Ocultar siempre + findings traducidos** — se
+  puede vaciar la lista de sugerencias aunque ya las hubieras
+  aplicado, y el chip del tile vuelve a "sano" cuando no queda
+  ninguna. Backend emite ahora claves i18n para findings y summary.
+- **Alarmas en tu idioma** — las siete reglas (desvío de rumbo,
+  autoridad, servo, temperatura, tensión, sensor perdido,
+  desconexión pypilot) se muestran y se hablan en el idioma activo.
+  Al SK sigue viajando el mensaje en inglés para compatibilidad con
+  KIP / WilhelmSK.
+- **Info EN sin fugas al ES** — el "Interfaz clásica pypilot" que
+  se colaba en cualquier idioma pasó a clave i18n.
+- **Remote Console con defaults TinyPilot** — sin borde rojo,
+  usuario `tc` pre-cargado y aviso de que la contraseña por defecto
+  también es `tc`.
+- **Mejor cobertura DE / FR** en todos los strings visibles del
+  Setup, Tune, Doctor y alarmas.
+
+**Cambiado**
+
+- **6 screenshots** actualizados a la UI actual.
+
+### Deutsch
+
+**Neu**
+
+- Chart mit Hover-Freeze und Y-Achse pro Band.
+- Tune-Slider mit ↺ und Profil-Fork-Dialog (Cancel setzt zurueck).
+- Setup-Kacheln zeigen Live-Status (Host, Sprache,
+  Kalibrierdatum, aktive SK-Saetze, SSH konfiguriert).
+- Sensor Quality mit "missing" im Chip-Zaehler und einer
+  Ignore / Restore-Taste pro Zeile.
+- Slide von oben zeigt die Tab-Leiste wieder.
+- Doctor: Ausblenden-Taste bleibt sichtbar, Findings und Summary
+  jetzt uebersetzt.
+- Alarm-Meldungen und Sprachausgabe in der aktiven Sprache.
+- Remote-Konsole ohne roten Rahmen; `tc` als Standard-Login.
+- Erweiterte DE-Uebersetzungen.
+
+### Français
+
+**Nouveautés**
+
+- Onglet Chart avec figeage au survol et graduation Y par bande.
+- Onglet Tune avec bouton ↺ par slider et modal de fork de profil
+  (Annuler revient a la valeur d'origine).
+- Grille Setup avec puces d'etat vivantes (hote, langue, dernier
+  ajustement de calibration, phrases SK actives, SSH configure).
+- Sensor Quality avec "missing" dans le compteur et un bouton
+  Ignorer / Restaurer par ligne.
+- Glissement du haut vers le bas pour reafficher la barre
+  d'onglets.
+- Doctor: bouton Masquer toujours visible, findings et resume
+  traduits.
+- Alarmes et voix TTS dans la langue active.
+- Console distante sans cadre rouge; `tc` par defaut.
+- Traductions FR etendues.
+
 ## 2.2.1 — 2026-08-31 — Rev128
 
 Docs-only patch release.

package/README.md

@@ -11,13 +11,67 @@ by Panaaj — see [Working alongside pypilot-autopilot-provider](#working-alongs
 
 ## Screenshots
 
-| Control | Tune |
+| Control | Chart |
 |---|---|
-| ![Control tab](https://raw.githubusercontent.com/Aitonos/signalk-pypilot-newui/main/public/screenshots/01-control-rose.jpg) | ![Tune tab](https://raw.githubusercontent.com/Aitonos/signalk-pypilot-newui/main/public/screenshots/02-tune-gains.jpg) |
+| ![Control tab](https://raw.githubusercontent.com/Aitonos/signalk-pypilot-newui/main/public/screenshots/01-control-rose.jpg) | ![Chart tab](https://raw.githubusercontent.com/Aitonos/signalk-pypilot-newui/main/public/screenshots/02-chart-trip-stats.jpg) |
 
-| Info | Setup |
+| Tune | Setup |
 |---|---|
-| ![Info tab](https://raw.githubusercontent.com/Aitonos/signalk-pypilot-newui/main/public/screenshots/03-info.jpg) | ![Setup tab](https://raw.githubusercontent.com/Aitonos/signalk-pypilot-newui/main/public/screenshots/04-setup.jpg) |
+| ![Tune tab](https://raw.githubusercontent.com/Aitonos/signalk-pypilot-newui/main/public/screenshots/03-tune-gains.jpg) | ![Setup tab](https://raw.githubusercontent.com/Aitonos/signalk-pypilot-newui/main/public/screenshots/04-setup-launcher.jpg) |
+
+| Race | Info |
+|---|---|
+| ![Race tab](https://raw.githubusercontent.com/Aitonos/signalk-pypilot-newui/main/public/screenshots/05-race-timer.jpg) | ![Info tab](https://raw.githubusercontent.com/Aitonos/signalk-pypilot-newui/main/public/screenshots/06-info.jpg) |
+
+## What's new in 2.3.0
+
+Feature batch on top of 2.2.x:
+
+- **Chart tab — interactive hover** — freeze the auto-refresh and
+  read the exact value of every band at any point in the history
+  window by hovering the graph. Y-axis ticks (min / mid / max) now
+  sit inside the right gutter for each band.
+- **Tune tab — per-slider restore + profile fork prompt** — every
+  gain slider gets a ↺ button that snaps back to the frozen
+  baseline captured when you unlocked the panel. On the first
+  change of an unlock session a modal asks whether to keep the
+  tweaks in the current profile, save them in a new
+  `tune-YYYYMMDD-HHMM` fork (mirroring the Doctor pattern), or
+  Cancel and revert.
+- **Setup launcher — live status chips on every tile** — Pypilot
+  Connection shows `host:port`, Language shows the active locale,
+  Calibration shows the timestamp of the last slider adjustment
+  (with a `Reset historial` button on the card), Signal K Sentences
+  shows the count of published SK paths, and Remote Control Console
+  says whether SSH creds are stored. Sensor Quality now counts
+  missing sensors into the failure tally and each row gains an
+  Ignore / Restore button so a sensor you don't have on this boat
+  (rudder without a rudder feedback, temp probe absent, ...) stops
+  turning the chip red.
+- **Nav bar slide-down gesture** — the counterpart to the existing
+  slide-up hide; drag from the top of the visor to bring the tab
+  bar back.
+- **Doctor tab — Hide / Discard on every suggestion** — the
+  Descartar / Ocultar button stays visible even after a suggestion
+  has been applied so you can clear stale advice from the list.
+  Hidden suggestions also drop off the tile chip's counter so the
+  card goes back to `sano` once you've cleared everything. Backend
+  now emits i18n keys + args for findings and summary so the whole
+  Doctor panel reads in the active language.
+- **Alarm engine i18n** — the seven built-in alarm rules
+  (heading-deviation, unable-to-steer, servo-overcurrent, etc.) now
+  render banners and speak the message in the active language
+  (EN / ES / DE / FR). The backend still publishes the English
+  notification message on `notifications.autopilot.*` for
+  KIP / WilhelmSK compatibility.
+- **Better DE / FR coverage** — Setup tile titles, calibration
+  strings, Tune fork modal and Info tab now translate in Deutsch
+  and Français instead of falling back to English.
+- **Remote Control Console defaults** — the tile no longer wears
+  its emergency red frame; the SSH user field is pre-filled with
+  the TinyPilot default (`tc`) and a hint spells out that the
+  default password is `tc` too, so the setup is a two-click job on
+  a stock TinyPilot.
 
 ## What's new in 2.2.0
 

package/dist/doctor.js

@@ -175,6 +175,8 @@ class DoctorEngine {
                 severity: "warn",
                 message: `Only ${n} engaged samples collected. Analysis skipped - keep the AP engaged during the whole session.`,
                 metric: `n=${n}`,
+                messageKey: "doctor.finding.insufficientData",
+                messageArgs: { n: String(n) },
             });
             return this.buildResult(session, now, samples, engaged, findings, suggestions);
         }
@@ -185,6 +187,8 @@ class DoctorEngine {
                 severity: Math.abs(meanDeg) > 6 ? "critical" : "warn",
                 message: `Persistent heading offset of ${meanDeg.toFixed(1)}° (mean error).`,
                 metric: `meanErr=${meanDeg.toFixed(2)}°`,
+                messageKey: "doctor.finding.bias",
+                messageArgs: { deg: meanDeg.toFixed(1) },
             });
             const I = session.initialGains["I"];
             if (typeof I === "number" && I > 0) {
@@ -215,6 +219,8 @@ class DoctorEngine {
                 severity: "warn",
                 message: `Heading oscillating with period ~${oscPeriodS.toFixed(1)}s, RMS ${rmsDeg.toFixed(1)}°.`,
                 metric: `oscPeriod=${oscPeriodS.toFixed(1)}s rms=${rmsDeg.toFixed(2)}°`,
+                messageKey: "doctor.finding.oscillation",
+                messageArgs: { period: oscPeriodS.toFixed(1), rms: rmsDeg.toFixed(1) },
             });
             const D = session.initialGains["D"];
             if (typeof D === "number" && D > 0) {
@@ -246,6 +252,8 @@ class DoctorEngine {
                 severity: "critical",
                 message: `Servo running at ${(servoDuty * 100).toFixed(0)}% duty but heading error still ${rmsDeg.toFixed(1)}°. AP is losing authority.`,
                 metric: `rms=${rmsDeg.toFixed(2)}° duty=${(servoDuty * 100).toFixed(0)}%`,
+                messageKey: "doctor.finding.authority",
+                messageArgs: { duty: (servoDuty * 100).toFixed(0), rms: rmsDeg.toFixed(1) },
             });
             const P = session.initialGains["P"];
             if (typeof P === "number" && P > 0) {
@@ -275,6 +283,8 @@ class DoctorEngine {
                 severity: "info",
                 message: `Heading is tight (${rmsDeg.toFixed(2)}°) but servo running ${(servoDuty * 100).toFixed(0)}% duty - possible chatter on a noisy heading signal.`,
                 metric: `rms=${rmsDeg.toFixed(2)}° duty=${(servoDuty * 100).toFixed(0)}%`,
+                messageKey: "doctor.finding.noise",
+                messageArgs: { rms: rmsDeg.toFixed(2), duty: (servoDuty * 100).toFixed(0) },
             });
             // No P/I/D suggestion - chatter is usually a deadband issue.
         }
@@ -282,12 +292,23 @@ class DoctorEngine {
     }
     buildResult(session, now, samples, engaged, findings, suggestions) {
         let summary;
-        if (findings.length === 0)
+        let summaryKey;
+        let summaryArgs;
+        if (findings.length === 0) {
             summary = "No significant issues detected. Current gains look healthy.";
-        else if (suggestions.length === 0)
+            summaryKey = "doctor.summary.clean";
+            summaryArgs = {};
+        }
+        else if (suggestions.length === 0) {
             summary = `${findings.length} issue(s) noted (no gain change suggested).`;
-        else
+            summaryKey = "doctor.summary.notedOnly";
+            summaryArgs = { issues: findings.length };
+        }
+        else {
             summary = `${findings.length} issue(s) detected. ${suggestions.length} gain change(s) suggested.`;
+            summaryKey = "doctor.summary.detected";
+            summaryArgs = { issues: findings.length, suggestions: suggestions.length };
+        }
         return {
             sessionId: session.id,
             startedTs: session.startedTs,
@@ -301,6 +322,8 @@ class DoctorEngine {
             findings,
             suggestions,
             summary,
+            summaryKey,
+            summaryArgs,
         };
     }
     // Rev120 (Carlos): on the FIRST apply of this session we fork the

package/dist/index.js

@@ -13,7 +13,7 @@ const prechecks_1 = require("./prechecks");
 const doctor_1 = require("./doctor");
 // Rev counter bumped on every build so the user can distinguish deploys
 // from the webapp header (feedback_revision_bump_each_build).
-const PLUGIN_REVISION = "Rev128";
+const PLUGIN_REVISION = "Rev137";
 // Rev59: read package.json once at load time so /status can report the
 // npm package version alongside the internal Rev counter.
 // eslint-disable-next-line @typescript-eslint/no-require-imports

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "signalk-pypilot-newui",
-  "version": "2.2.1",
+  "version": "2.3.0",
   "description": "Signal K friendly UI for the pypilot autopilot, with the capability to spread its functions and buttons to other programs like KIP, WilhelmSK and freeboard. Touch-first mobile visor + full pypilot data (servo, gains, calibration, tack, warnings) as first-class Signal K paths and Simple Switches. Coexists with pypilot-autopilot-provider.",
   "main": "./dist/index.js",
   "scripts": {
@@ -42,10 +42,12 @@
     "displayName": "PyPilot New-UI + SK Paths",
     "webapp": "./public",
     "screenshots": [
-      { "src": "./public/screenshots/01-control-rose.jpg", "title": "Control - compass rose with sailing wedges, AWA/TWA arrows, target diamond" },
-      { "src": "./public/screenshots/02-tune-gains.jpg",   "title": "Tune - PID gain sliders with -10/-1/+1/+10 fine-tune and safety lock" },
-      { "src": "./public/screenshots/03-info.jpg",         "title": "Info - quick start, credits, license, GitHub link, config export/import" },
-      { "src": "./public/screenshots/04-setup.jpg",        "title": "Setup - LAN scan, absorb provider, remote RESTART pypilot via SSH" }
+      { "src": "./public/screenshots/01-control-rose.jpg",        "title": "Control - compass rose with Gota Chain (amber A = apparent wind, teal T = true wind), sailing wedges, 4 configurable corner tiles, big-touch AP button and heading trim buttons" },
+      { "src": "./public/screenshots/02-chart-trip-stats.jpg",    "title": "Chart - Trip Stats cards (engaged time, distance, energy, RMS/p95 heading error, servo runtime, tacks/gybes, max servo A) plus live Servo Health baseline" },
+      { "src": "./public/screenshots/03-tune-gains.jpg",          "title": "Tune - PID gain sliders per pilot/profile, locked-by-default with orange 'was:' baseline, ±10/±1 fine-tune buttons" },
+      { "src": "./public/screenshots/04-setup-launcher.jpg",      "title": "Setup - launcher grid with live-summary tiles for Autopilot Check, Diagnostics & Advice (Pypilot Doctor), Sensor Quality, Alarms, Connection, Calibration, Signal K Sentences, Language and Remote Control Console" },
+      { "src": "./public/screenshots/05-race-timer.jpg",          "title": "Race - T1/T2 countdown timer with beeps and spoken seconds, background-persistent across tabs" },
+      { "src": "./public/screenshots/06-info.jpg",                "title": "Info - safety notice, quick-start guide, coexistence with pypilot-autopilot-provider, credits and license" }
     ]
   },
   "files": [