shieldcortex 3.4.31 → 3.4.33

package/dashboard/.next/standalone/node_modules/source-map/lib/base64-vlq.js

@@ -1,140 +0,0 @@
-/* -*- Mode: js; js-indent-level: 2; -*- */
-/*
- * Copyright 2011 Mozilla Foundation and contributors
- * Licensed under the New BSD license. See LICENSE or:
- * http://opensource.org/licenses/BSD-3-Clause
- *
- * Based on the Base 64 VLQ implementation in Closure Compiler:
- * https://code.google.com/p/closure-compiler/source/browse/trunk/src/com/google/debugging/sourcemap/Base64VLQ.java
- *
- * Copyright 2011 The Closure Compiler Authors. All rights reserved.
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above
- *    copyright notice, this list of conditions and the following
- *    disclaimer in the documentation and/or other materials provided
- *    with the distribution.
- *  * Neither the name of Google Inc. nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-var base64 = require('./base64');
-
-// A single base 64 digit can contain 6 bits of data. For the base 64 variable
-// length quantities we use in the source map spec, the first bit is the sign,
-// the next four bits are the actual value, and the 6th bit is the
-// continuation bit. The continuation bit tells us whether there are more
-// digits in this value following this digit.
-//
-//   Continuation
-//   |    Sign
-//   |    |
-//   V    V
-//   101011
-
-var VLQ_BASE_SHIFT = 5;
-
-// binary: 100000
-var VLQ_BASE = 1 << VLQ_BASE_SHIFT;
-
-// binary: 011111
-var VLQ_BASE_MASK = VLQ_BASE - 1;
-
-// binary: 100000
-var VLQ_CONTINUATION_BIT = VLQ_BASE;
-
-/**
- * Converts from a two-complement value to a value where the sign bit is
- * placed in the least significant bit.  For example, as decimals:
- *   1 becomes 2 (10 binary), -1 becomes 3 (11 binary)
- *   2 becomes 4 (100 binary), -2 becomes 5 (101 binary)
- */
-function toVLQSigned(aValue) {
-  return aValue < 0
-    ? ((-aValue) << 1) + 1
-    : (aValue << 1) + 0;
-}
-
-/**
- * Converts to a two-complement value from a value where the sign bit is
- * placed in the least significant bit.  For example, as decimals:
- *   2 (10 binary) becomes 1, 3 (11 binary) becomes -1
- *   4 (100 binary) becomes 2, 5 (101 binary) becomes -2
- */
-function fromVLQSigned(aValue) {
-  var isNegative = (aValue & 1) === 1;
-  var shifted = aValue >> 1;
-  return isNegative
-    ? -shifted
-    : shifted;
-}
-
-/**
- * Returns the base 64 VLQ encoded value.
- */
-exports.encode = function base64VLQ_encode(aValue) {
-  var encoded = "";
-  var digit;
-
-  var vlq = toVLQSigned(aValue);
-
-  do {
-    digit = vlq & VLQ_BASE_MASK;
-    vlq >>>= VLQ_BASE_SHIFT;
-    if (vlq > 0) {
-      // There are still more digits in this value, so we must make sure the
-      // continuation bit is marked.
-      digit |= VLQ_CONTINUATION_BIT;
-    }
-    encoded += base64.encode(digit);
-  } while (vlq > 0);
-
-  return encoded;
-};
-
-/**
- * Decodes the next base 64 VLQ value from the given string and returns the
- * value and the rest of the string via the out parameter.
- */
-exports.decode = function base64VLQ_decode(aStr, aIndex, aOutParam) {
-  var strLen = aStr.length;
-  var result = 0;
-  var shift = 0;
-  var continuation, digit;
-
-  do {
-    if (aIndex >= strLen) {
-      throw new Error("Expected more digits in base 64 VLQ value.");
-    }
-
-    digit = base64.decode(aStr.charCodeAt(aIndex++));
-    if (digit === -1) {
-      throw new Error("Invalid base64 digit: " + aStr.charAt(aIndex - 1));
-    }
-
-    continuation = !!(digit & VLQ_CONTINUATION_BIT);
-    digit &= VLQ_BASE_MASK;
-    result = result + (digit << shift);
-    shift += VLQ_BASE_SHIFT;
-  } while (continuation);
-
-  aOutParam.value = fromVLQSigned(result);
-  aOutParam.rest = aIndex;
-};

package/dashboard/.next/standalone/node_modules/source-map/lib/base64.js

@@ -1,67 +0,0 @@
-/* -*- Mode: js; js-indent-level: 2; -*- */
-/*
- * Copyright 2011 Mozilla Foundation and contributors
- * Licensed under the New BSD license. See LICENSE or:
- * http://opensource.org/licenses/BSD-3-Clause
- */
-
-var intToCharMap = 'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/'.split('');
-
-/**
- * Encode an integer in the range of 0 to 63 to a single base 64 digit.
- */
-exports.encode = function (number) {
-  if (0 <= number && number < intToCharMap.length) {
-    return intToCharMap[number];
-  }
-  throw new TypeError("Must be between 0 and 63: " + number);
-};
-
-/**
- * Decode a single base 64 character code digit to an integer. Returns -1 on
- * failure.
- */
-exports.decode = function (charCode) {
-  var bigA = 65;     // 'A'
-  var bigZ = 90;     // 'Z'
-
-  var littleA = 97;  // 'a'
-  var littleZ = 122; // 'z'
-
-  var zero = 48;     // '0'
-  var nine = 57;     // '9'
-
-  var plus = 43;     // '+'
-  var slash = 47;    // '/'
-
-  var littleOffset = 26;
-  var numberOffset = 52;
-
-  // 0 - 25: ABCDEFGHIJKLMNOPQRSTUVWXYZ
-  if (bigA <= charCode && charCode <= bigZ) {
-    return (charCode - bigA);
-  }
-
-  // 26 - 51: abcdefghijklmnopqrstuvwxyz
-  if (littleA <= charCode && charCode <= littleZ) {
-    return (charCode - littleA + littleOffset);
-  }
-
-  // 52 - 61: 0123456789
-  if (zero <= charCode && charCode <= nine) {
-    return (charCode - zero + numberOffset);
-  }
-
-  // 62: +
-  if (charCode == plus) {
-    return 62;
-  }
-
-  // 63: /
-  if (charCode == slash) {
-    return 63;
-  }
-
-  // Invalid base64 digit.
-  return -1;
-};

package/dashboard/.next/standalone/node_modules/source-map/lib/binary-search.js

@@ -1,111 +0,0 @@
-/* -*- Mode: js; js-indent-level: 2; -*- */
-/*
- * Copyright 2011 Mozilla Foundation and contributors
- * Licensed under the New BSD license. See LICENSE or:
- * http://opensource.org/licenses/BSD-3-Clause
- */
-
-exports.GREATEST_LOWER_BOUND = 1;
-exports.LEAST_UPPER_BOUND = 2;
-
-/**
- * Recursive implementation of binary search.
- *
- * @param aLow Indices here and lower do not contain the needle.
- * @param aHigh Indices here and higher do not contain the needle.
- * @param aNeedle The element being searched for.
- * @param aHaystack The non-empty array being searched.
- * @param aCompare Function which takes two elements and returns -1, 0, or 1.
- * @param aBias Either 'binarySearch.GREATEST_LOWER_BOUND' or
- *     'binarySearch.LEAST_UPPER_BOUND'. Specifies whether to return the
- *     closest element that is smaller than or greater than the one we are
- *     searching for, respectively, if the exact element cannot be found.
- */
-function recursiveSearch(aLow, aHigh, aNeedle, aHaystack, aCompare, aBias) {
-  // This function terminates when one of the following is true:
-  //
-  //   1. We find the exact element we are looking for.
-  //
-  //   2. We did not find the exact element, but we can return the index of
-  //      the next-closest element.
-  //
-  //   3. We did not find the exact element, and there is no next-closest
-  //      element than the one we are searching for, so we return -1.
-  var mid = Math.floor((aHigh - aLow) / 2) + aLow;
-  var cmp = aCompare(aNeedle, aHaystack[mid], true);
-  if (cmp === 0) {
-    // Found the element we are looking for.
-    return mid;
-  }
-  else if (cmp > 0) {
-    // Our needle is greater than aHaystack[mid].
-    if (aHigh - mid > 1) {
-      // The element is in the upper half.
-      return recursiveSearch(mid, aHigh, aNeedle, aHaystack, aCompare, aBias);
-    }
-
-    // The exact needle element was not found in this haystack. Determine if
-    // we are in termination case (3) or (2) and return the appropriate thing.
-    if (aBias == exports.LEAST_UPPER_BOUND) {
-      return aHigh < aHaystack.length ? aHigh : -1;
-    } else {
-      return mid;
-    }
-  }
-  else {
-    // Our needle is less than aHaystack[mid].
-    if (mid - aLow > 1) {
-      // The element is in the lower half.
-      return recursiveSearch(aLow, mid, aNeedle, aHaystack, aCompare, aBias);
-    }
-
-    // we are in termination case (3) or (2) and return the appropriate thing.
-    if (aBias == exports.LEAST_UPPER_BOUND) {
-      return mid;
-    } else {
-      return aLow < 0 ? -1 : aLow;
-    }
-  }
-}
-
-/**
- * This is an implementation of binary search which will always try and return
- * the index of the closest element if there is no exact hit. This is because
- * mappings between original and generated line/col pairs are single points,
- * and there is an implicit region between each of them, so a miss just means
- * that you aren't on the very start of a region.
- *
- * @param aNeedle The element you are looking for.
- * @param aHaystack The array that is being searched.
- * @param aCompare A function which takes the needle and an element in the
- *     array and returns -1, 0, or 1 depending on whether the needle is less
- *     than, equal to, or greater than the element, respectively.
- * @param aBias Either 'binarySearch.GREATEST_LOWER_BOUND' or
- *     'binarySearch.LEAST_UPPER_BOUND'. Specifies whether to return the
- *     closest element that is smaller than or greater than the one we are
- *     searching for, respectively, if the exact element cannot be found.
- *     Defaults to 'binarySearch.GREATEST_LOWER_BOUND'.
- */
-exports.search = function search(aNeedle, aHaystack, aCompare, aBias) {
-  if (aHaystack.length === 0) {
-    return -1;
-  }
-
-  var index = recursiveSearch(-1, aHaystack.length, aNeedle, aHaystack,
-                              aCompare, aBias || exports.GREATEST_LOWER_BOUND);
-  if (index < 0) {
-    return -1;
-  }
-
-  // We have found either the exact element, or the next-closest element than
-  // the one we are searching for. However, there may be more than one such
-  // element. Make sure we always return the smallest of these.
-  while (index - 1 >= 0) {
-    if (aCompare(aHaystack[index], aHaystack[index - 1], true) !== 0) {
-      break;
-    }
-    --index;
-  }
-
-  return index;
-};

package/dashboard/.next/standalone/node_modules/source-map/lib/mapping-list.js

@@ -1,79 +0,0 @@
-/* -*- Mode: js; js-indent-level: 2; -*- */
-/*
- * Copyright 2014 Mozilla Foundation and contributors
- * Licensed under the New BSD license. See LICENSE or:
- * http://opensource.org/licenses/BSD-3-Clause
- */
-
-var util = require('./util');
-
-/**
- * Determine whether mappingB is after mappingA with respect to generated
- * position.
- */
-function generatedPositionAfter(mappingA, mappingB) {
-  // Optimized for most common case
-  var lineA = mappingA.generatedLine;
-  var lineB = mappingB.generatedLine;
-  var columnA = mappingA.generatedColumn;
-  var columnB = mappingB.generatedColumn;
-  return lineB > lineA || lineB == lineA && columnB >= columnA ||
-         util.compareByGeneratedPositionsInflated(mappingA, mappingB) <= 0;
-}
-
-/**
- * A data structure to provide a sorted view of accumulated mappings in a
- * performance conscious manner. It trades a neglibable overhead in general
- * case for a large speedup in case of mappings being added in order.
- */
-function MappingList() {
-  this._array = [];
-  this._sorted = true;
-  // Serves as infimum
-  this._last = {generatedLine: -1, generatedColumn: 0};
-}
-
-/**
- * Iterate through internal items. This method takes the same arguments that
- * `Array.prototype.forEach` takes.
- *
- * NOTE: The order of the mappings is NOT guaranteed.
- */
-MappingList.prototype.unsortedForEach =
-  function MappingList_forEach(aCallback, aThisArg) {
-    this._array.forEach(aCallback, aThisArg);
-  };
-
-/**
- * Add the given source mapping.
- *
- * @param Object aMapping
- */
-MappingList.prototype.add = function MappingList_add(aMapping) {
-  if (generatedPositionAfter(this._last, aMapping)) {
-    this._last = aMapping;
-    this._array.push(aMapping);
-  } else {
-    this._sorted = false;
-    this._array.push(aMapping);
-  }
-};
-
-/**
- * Returns the flat, sorted array of mappings. The mappings are sorted by
- * generated position.
- *
- * WARNING: This method returns internal data without copying, for
- * performance. The return value must NOT be mutated, and should be treated as
- * an immutable borrow. If you want to take ownership, you must make your own
- * copy.
- */
-MappingList.prototype.toArray = function MappingList_toArray() {
-  if (!this._sorted) {
-    this._array.sort(util.compareByGeneratedPositionsInflated);
-    this._sorted = true;
-  }
-  return this._array;
-};
-
-exports.MappingList = MappingList;

package/dashboard/.next/standalone/node_modules/source-map/lib/quick-sort.js

@@ -1,114 +0,0 @@
-/* -*- Mode: js; js-indent-level: 2; -*- */
-/*
- * Copyright 2011 Mozilla Foundation and contributors
- * Licensed under the New BSD license. See LICENSE or:
- * http://opensource.org/licenses/BSD-3-Clause
- */
-
-// It turns out that some (most?) JavaScript engines don't self-host
-// `Array.prototype.sort`. This makes sense because C++ will likely remain
-// faster than JS when doing raw CPU-intensive sorting. However, when using a
-// custom comparator function, calling back and forth between the VM's C++ and
-// JIT'd JS is rather slow *and* loses JIT type information, resulting in
-// worse generated code for the comparator function than would be optimal. In
-// fact, when sorting with a comparator, these costs outweigh the benefits of
-// sorting in C++. By using our own JS-implemented Quick Sort (below), we get
-// a ~3500ms mean speed-up in `bench/bench.html`.
-
-/**
- * Swap the elements indexed by `x` and `y` in the array `ary`.
- *
- * @param {Array} ary
- *        The array.
- * @param {Number} x
- *        The index of the first item.
- * @param {Number} y
- *        The index of the second item.
- */
-function swap(ary, x, y) {
-  var temp = ary[x];
-  ary[x] = ary[y];
-  ary[y] = temp;
-}
-
-/**
- * Returns a random integer within the range `low .. high` inclusive.
- *
- * @param {Number} low
- *        The lower bound on the range.
- * @param {Number} high
- *        The upper bound on the range.
- */
-function randomIntInRange(low, high) {
-  return Math.round(low + (Math.random() * (high - low)));
-}
-
-/**
- * The Quick Sort algorithm.
- *
- * @param {Array} ary
- *        An array to sort.
- * @param {function} comparator
- *        Function to use to compare two items.
- * @param {Number} p
- *        Start index of the array
- * @param {Number} r
- *        End index of the array
- */
-function doQuickSort(ary, comparator, p, r) {
-  // If our lower bound is less than our upper bound, we (1) partition the
-  // array into two pieces and (2) recurse on each half. If it is not, this is
-  // the empty array and our base case.
-
-  if (p < r) {
-    // (1) Partitioning.
-    //
-    // The partitioning chooses a pivot between `p` and `r` and moves all
-    // elements that are less than or equal to the pivot to the before it, and
-    // all the elements that are greater than it after it. The effect is that
-    // once partition is done, the pivot is in the exact place it will be when
-    // the array is put in sorted order, and it will not need to be moved
-    // again. This runs in O(n) time.
-
-    // Always choose a random pivot so that an input array which is reverse
-    // sorted does not cause O(n^2) running time.
-    var pivotIndex = randomIntInRange(p, r);
-    var i = p - 1;
-
-    swap(ary, pivotIndex, r);
-    var pivot = ary[r];
-
-    // Immediately after `j` is incremented in this loop, the following hold
-    // true:
-    //
-    //   * Every element in `ary[p .. i]` is less than or equal to the pivot.
-    //
-    //   * Every element in `ary[i+1 .. j-1]` is greater than the pivot.
-    for (var j = p; j < r; j++) {
-      if (comparator(ary[j], pivot) <= 0) {
-        i += 1;
-        swap(ary, i, j);
-      }
-    }
-
-    swap(ary, i + 1, j);
-    var q = i + 1;
-
-    // (2) Recurse on each half.
-
-    doQuickSort(ary, comparator, p, q - 1);
-    doQuickSort(ary, comparator, q + 1, r);
-  }
-}
-
-/**
- * Sort the given array in-place with the given comparator function.
- *
- * @param {Array} ary
- *        An array to sort.
- * @param {function} comparator
- *        Function to use to compare two items.
- */
-exports.quickSort = function (ary, comparator) {
-  doQuickSort(ary, comparator, 0, ary.length - 1);
-};