severally-mcp 2.0.0 → 2.3.1

package/docs/install.md

@@ -10,7 +10,7 @@ into that cache, so it can be cleared afterwards.
 
 ## Requirements
 
-Beyond Node.js 20.10 or newer and a logged-in CLI, as in the README:
+Beyond Node.js 22 or newer and a logged-in CLI, as in the README:
 
 - macOS/Linux: npm's global executable directory on `PATH`. The default (plugin mode, below) installs a
   `severally-mcp` command there for Codex to launch. `--manual` does without it.
@@ -42,7 +42,12 @@ run `npm run init-config` (see [Configuration](../README.md#configuration) in th
 
 ## Checking the registration
 
-After restarting the clients, check that each one sees severally. Skip the lines for CLIs you don't have:
+`npx -y severally-mcp@latest status` shows it all at once, without starting a consultation: whether the config
+file is valid, which consultants this machine can reach (and why the others cannot), whether every installed copy
+is the same version, and which clients have severally registered. It does not check that a CLI is logged in; the
+first consultation shows that.
+
+To check one client yourself, after restarting it. Skip the lines for CLIs you don't have:
 
 ```bash
 # macOS / Linux (plugin mode)
@@ -65,7 +70,7 @@ For Claude Code alone, no clone and no installer are needed. In Claude Code:
 /plugin install severally@severally
 ```
 
-Restart Claude Code and check with `claude plugin details severally`. Node.js 20.10 or newer must be on `PATH`,
+Restart Claude Code and check with `claude plugin details severally`. Node.js 22 or newer must be on `PATH`,
 since the plugin starts its server with `node`. The tools appear as `mcp__plugin_severally_severally__*`. This
 route has been tried on Linux only.
 
@@ -94,8 +99,12 @@ Windows. Pass `--manual` to use manual mode on macOS/Linux too.
 - In plugin mode it also runs a global npm install, which provides the `severally-mcp` command that Codex
   launches. `--skip-global` skips that step and is accepted only when `severally-mcp` on `PATH` already points
   at the copied runtime. Manual mode needs no global install.
-- It changes client settings only through each CLI's own commands (`plugin add` / `mcp add`). Before it does
-  anything, it backs up each client's settings file (`~/.claude.json`, `~/.codex/config.toml`,
+- It changes client settings only through each CLI's own commands (`plugin add` / `mcp add`), with one
+  exception: for a manually registered Codex it also writes one line, `tool_timeout_sec = 660`, into
+  `config.toml` under `[mcp_servers.severally]` (the same long wait the Codex plugin has; `codex mcp add` cannot
+  set it). An existing `tool_timeout_sec` there is kept, and the wait follows it. If the line cannot be written,
+  Codex is registered without the long wait and the installer says so.
+- Before it does anything, it backs up each client's settings file (`~/.claude.json`, `~/.codex/config.toml`,
   `~/.gemini/config/mcp_config.json` and `~/.gemini/antigravity-cli/settings.json`,
   `~/.config/opencode/opencode.json(c)`) and any existing Skill directory to `~/.severally/backups/<timestamp>/`,
   naming each backup after its original path.
@@ -107,8 +116,8 @@ Windows. Pass `--manual` to use manual mode on macOS/Linux too.
 
 ## Skipping the permission prompt for tools that send nothing out
 
-Every tool except `consult_start` stays on your machine: `consult_get` (called several times per
-consultation), `consult_list`, `consult_cancel`, `consult_record` and `consult_export`. None of the clients has a command that adds tools to its allowlist, so the installer
+Every tool except `consult_start` stays on your machine: `consult_get` (called repeatedly while a
+consultation runs), `consult_list`, `consult_cancel`, `consult_record` and `consult_export`. None of the clients has a command that adds tools to its allowlist, so the installer
 leaves this to you. Keep `consult_start` prompting: it is the point where material leaves for another vendor.
 
 - **Claude Code**: the Skill already allows these five tools (its `allowed-tools`) for the turn it is invoked in, so
@@ -132,6 +141,20 @@ leaves this to you. Keep `consult_start` prompting: it is the point where materi
 - **OpenCode** allows MCP tools without asking unless your own `permission` settings say otherwise.
 - **Antigravity**: not covered here; the rule syntax for a single MCP tool has not been checked.
 
+### Letting consultations start without the prompt too
+
+The agent consults on its own (the Skill tells it not to ask whether to), so with `consult_start` prompting, every
+consultation it starts waits for you once. That prompt is the only check before material leaves your machine, so it
+stays by default. To drop it, add `consult_start` the same way as the tools above:
+`mcp__plugin_severally_severally__consult_start` in Claude Code's allow list, or a
+`[mcp_servers.severally.tools.consult_start]` table in Codex's `config.toml` (for a `--manual` registration; not
+checked for the plugin install).
+
+From then on, each consultation sends these to every consultant's model without asking you: the brief, the files
+it exposes, and whatever the consultant reads while it runs (see
+[What a consultant can see and do](../README.md#what-a-consultant-can-see-and-do)). Do it only where everything the
+agent can reach may go to those vendors.
+
 ## Updating
 
 Run `npx -y severally-mcp@latest install`, or pull the clone and run `npm install` and

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "severally-mcp",
-  "version": "2.0.0",
-  "description": "A plugin that gives your AI agent consultants: Codex, Claude Code, Antigravity and OpenCode.",
+  "version": "2.3.1",
+  "description": "A plugin that lets your AI agent ask other coding agents for independent opinions, returned separately.",
   "type": "module",
   "license": "Apache-2.0",
   "author": "coz.a (https://github.com/coz-a)",
@@ -27,10 +27,12 @@
     "README.md",
     "README.ja.md",
     "CONFIG.md",
+    "config.example.json",
+    "CODE_OF_CONDUCT.md",
     "docs"
   ],
   "engines": {
-    "node": ">=20.10"
+    "node": ">=22"
   },
   "scripts": {
     "test": "node scripts/test.mjs",

package/plugins/severally/.claude-plugin/plugin.json

@@ -1,7 +1,7 @@
 {
   "$schema": "https://anthropic.com/claude-code/plugin.schema.json",
   "name": "severally",
-  "version": "2.0.0",
+  "version": "2.3.1",
   "description": "Ask Codex, Claude Code, Antigravity or OpenCode for an independent opinion, review or structured debate, in a sandboxed child session that can read files and search the web but cannot edit files, change the system, or start other agents.",
   "author": {
     "name": "coz.a",

package/plugins/severally/.codex-plugin/plugin.json

@@ -1,6 +1,6 @@
 {
   "name": "severally",
-  "version": "2.0.0",
+  "version": "2.3.1",
   "description": "Ask Codex, Claude Code, Antigravity or OpenCode for an independent opinion, review or structured debate, in a sandboxed child session that can read files and search the web but cannot edit files, change the system, or start other agents.",
   "author": {
     "name": "coz.a",
@@ -20,7 +20,9 @@
   "mcpServers": {
     "severally": {
       "type": "stdio",
-      "command": "severally-mcp"
+      "command": "severally-mcp",
+      "env": { "SEVERALLY_MAX_WAIT_MS": "600000" },
+      "tool_timeout_sec": 660
     }
   },
   "interface": {

package/plugins/severally/.mcp.json

@@ -3,7 +3,8 @@
     "severally": {
       "type": "stdio",
       "command": "node",
-      "args": ["${CLAUDE_PLUGIN_ROOT}/dist/severally-mcp.mjs"]
+      "args": ["${CLAUDE_PLUGIN_ROOT}/dist/severally-mcp.mjs"],
+      "env": { "SEVERALLY_MAX_WAIT_MS": "600000" }
     }
   }
 }