sememe 0.0.0-stage → 0.4.22

package/vendor/spl-token/737788ff5bcc3f1f44cfb222f25483187650be76/interface/src/instruction.rs

@@ -0,0 +1,1963 @@
+//! Instruction types
+
+use {
+    crate::{check_program_account, error::TokenError},
+    solana_instruction::{AccountMeta, Instruction},
+    solana_program_error::ProgramError,
+    solana_program_option::COption,
+    solana_pubkey::Pubkey,
+    solana_sdk_ids::sysvar,
+    std::{convert::TryInto, mem::size_of},
+};
+
+/// Minimum number of multisignature signers (min N)
+pub const MIN_SIGNERS: usize = 1;
+/// Maximum number of multisignature signers (max N)
+pub const MAX_SIGNERS: usize = 11;
+/// Serialized length of a `u64`, for unpacking
+const U64_BYTES: usize = 8;
+
+/// Instructions supported by the token program.
+#[repr(C, u8)]
+#[derive(Clone, Debug, PartialEq)]
+pub enum TokenInstruction<'a> {
+    /// Initializes a new mint and optionally deposits all the newly minted
+    /// tokens in an account.
+    ///
+    /// The `InitializeMint` instruction requires no signers and MUST be
+    /// included within the same Transaction as the system program's
+    /// `CreateAccount` instruction that creates the account being initialized.
+    /// Otherwise another party can acquire ownership of the uninitialized
+    /// account.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   0. `[writable]` The mint to initialize.
+    ///   1. `[]` Rent sysvar
+    InitializeMint {
+        /// Number of base 10 digits to the right of the decimal place.
+        decimals: u8,
+        /// The authority/multisignature to mint tokens.
+        mint_authority: Pubkey,
+        /// The freeze authority/multisignature of the mint.
+        freeze_authority: COption<Pubkey>,
+    },
+    /// Initializes a new account to hold tokens.  If this account is associated
+    /// with the native mint then the token balance of the initialized account
+    /// will be equal to the amount of SOL in the account. If this account is
+    /// associated with another mint, that mint must be initialized before this
+    /// command can succeed.
+    ///
+    /// The `InitializeAccount` instruction requires no signers and MUST be
+    /// included within the same Transaction as the system program's
+    /// `CreateAccount` instruction that creates the account being initialized.
+    /// Otherwise another party can acquire ownership of the uninitialized
+    /// account.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   0. `[writable]`  The account to initialize.
+    ///   1. `[]` The mint this account will be associated with.
+    ///   2. `[]` The new account's owner/multisignature.
+    ///   3. `[]` Rent sysvar
+    InitializeAccount,
+    /// Initializes a multisignature account with N provided signers.
+    ///
+    /// Multisignature accounts can used in place of any single owner/delegate
+    /// accounts in any token instruction that require an owner/delegate to be
+    /// present.  The variant field represents the number of signers (M)
+    /// required to validate this multisignature account.
+    ///
+    /// The `InitializeMultisig` instruction requires no signers and MUST be
+    /// included within the same Transaction as the system program's
+    /// `CreateAccount` instruction that creates the account being initialized.
+    /// Otherwise another party can acquire ownership of the uninitialized
+    /// account.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   0. `[writable]` The multisignature account to initialize.
+    ///   1. `[]` Rent sysvar
+    ///   2. ..`2+N`. `[]` The signer accounts, must equal to N where `1 <= N <=
+    ///      11`.
+    InitializeMultisig {
+        /// The number of signers (M) required to validate this multisignature
+        /// account.
+        m: u8,
+    },
+    /// Transfers tokens from one account to another either directly or via a
+    /// delegate.  If this account is associated with the native mint then equal
+    /// amounts of SOL and Tokens will be transferred to the destination
+    /// account.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single owner/delegate
+    ///   0. `[writable]` The source account.
+    ///   1. `[writable]` The destination account.
+    ///   2. `[signer]` The source account's owner/delegate.
+    ///
+    ///   * Multisignature owner/delegate
+    ///   0. `[writable]` The source account.
+    ///   1. `[writable]` The destination account.
+    ///   2. `[]` The source account's multisignature owner/delegate.
+    ///   3. ..`3+M` `[signer]` M signer accounts.
+    Transfer {
+        /// The amount of tokens to transfer.
+        amount: u64,
+    },
+    /// Approves a delegate.  A delegate is given the authority over tokens on
+    /// behalf of the source account's owner.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single owner
+    ///   0. `[writable]` The source account.
+    ///   1. `[]` The delegate.
+    ///   2. `[signer]` The source account owner.
+    ///
+    ///   * Multisignature owner
+    ///   0. `[writable]` The source account.
+    ///   1. `[]` The delegate.
+    ///   2. `[]` The source account's multisignature owner.
+    ///   3. ..`3+M` `[signer]` M signer accounts
+    Approve {
+        /// The amount of tokens the delegate is approved for.
+        amount: u64,
+    },
+    /// Revokes the delegate's authority.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single owner
+    ///   0. `[writable]` The source account.
+    ///   1. `[signer]` The source account owner.
+    ///
+    ///   * Multisignature owner
+    ///   0. `[writable]` The source account.
+    ///   1. `[]` The source account's multisignature owner.
+    ///   2. ..`2+M` `[signer]` M signer accounts
+    Revoke,
+    /// Sets a new authority of a mint or account.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single authority
+    ///   0. `[writable]` The mint or account to change the authority of.
+    ///   1. `[signer]` The current authority of the mint or account.
+    ///
+    ///   * Multisignature authority
+    ///   0. `[writable]` The mint or account to change the authority of.
+    ///   1. `[]` The mint's or account's current multisignature authority.
+    ///   2. ..`2+M` `[signer]` M signer accounts
+    SetAuthority {
+        /// The type of authority to update.
+        authority_type: AuthorityType,
+        /// The new authority
+        new_authority: COption<Pubkey>,
+    },
+    /// Mints new tokens to an account.  The native mint does not support
+    /// minting.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single authority
+    ///   0. `[writable]` The mint.
+    ///   1. `[writable]` The account to mint tokens to.
+    ///   2. `[signer]` The mint's minting authority.
+    ///
+    ///   * Multisignature authority
+    ///   0. `[writable]` The mint.
+    ///   1. `[writable]` The account to mint tokens to.
+    ///   2. `[]` The mint's multisignature mint-tokens authority.
+    ///   3. ..`3+M` `[signer]` M signer accounts.
+    MintTo {
+        /// The amount of new tokens to mint.
+        amount: u64,
+    },
+    /// Burns tokens by removing them from an account.  `Burn` does not support
+    /// accounts associated with the native mint, use `CloseAccount` instead.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single owner/delegate
+    ///   0. `[writable]` The account to burn from.
+    ///   1. `[writable]` The token mint.
+    ///   2. `[signer]` The account's owner/delegate.
+    ///
+    ///   * Multisignature owner/delegate
+    ///   0. `[writable]` The account to burn from.
+    ///   1. `[writable]` The token mint.
+    ///   2. `[]` The account's multisignature owner/delegate.
+    ///   3. ..`3+M` `[signer]` M signer accounts.
+    Burn {
+        /// The amount of tokens to burn.
+        amount: u64,
+    },
+    /// Close an account by transferring all its SOL to the destination account.
+    /// Non-native accounts may only be closed if its token amount is zero.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single owner
+    ///   0. `[writable]` The account to close.
+    ///   1. `[writable]` The destination account.
+    ///   2. `[signer]` The account's owner.
+    ///
+    ///   * Multisignature owner
+    ///   0. `[writable]` The account to close.
+    ///   1. `[writable]` The destination account.
+    ///   2. `[]` The account's multisignature owner.
+    ///   3. ..`3+M` `[signer]` M signer accounts.
+    CloseAccount,
+    /// Freeze an Initialized account using the Mint's `freeze_authority` (if
+    /// set).
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single owner
+    ///   0. `[writable]` The account to freeze.
+    ///   1. `[]` The token mint.
+    ///   2. `[signer]` The mint freeze authority.
+    ///
+    ///   * Multisignature owner
+    ///   0. `[writable]` The account to freeze.
+    ///   1. `[]` The token mint.
+    ///   2. `[]` The mint's multisignature freeze authority.
+    ///   3. ..`3+M` `[signer]` M signer accounts.
+    FreezeAccount,
+    /// Thaw a Frozen account using the Mint's `freeze_authority` (if set).
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single owner
+    ///   0. `[writable]` The account to thaw.
+    ///   1. `[]` The token mint.
+    ///   2. `[signer]` The mint freeze authority.
+    ///
+    ///   * Multisignature owner
+    ///   0. `[writable]` The account to thaw.
+    ///   1. `[]` The token mint.
+    ///   2. `[]` The mint's multisignature freeze authority.
+    ///   3. ..`3+M` `[signer]` M signer accounts.
+    ThawAccount,
+
+    /// Transfers tokens from one account to another either directly or via a
+    /// delegate.  If this account is associated with the native mint then equal
+    /// amounts of SOL and Tokens will be transferred to the destination
+    /// account.
+    ///
+    /// This instruction differs from Transfer in that the token mint and
+    /// decimals value is checked by the caller.  This may be useful when
+    /// creating transactions offline or within a hardware wallet.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single owner/delegate
+    ///   0. `[writable]` The source account.
+    ///   1. `[]` The token mint.
+    ///   2. `[writable]` The destination account.
+    ///   3. `[signer]` The source account's owner/delegate.
+    ///
+    ///   * Multisignature owner/delegate
+    ///   0. `[writable]` The source account.
+    ///   1. `[]` The token mint.
+    ///   2. `[writable]` The destination account.
+    ///   3. `[]` The source account's multisignature owner/delegate.
+    ///   4. ..`4+M` `[signer]` M signer accounts.
+    TransferChecked {
+        /// The amount of tokens to transfer.
+        amount: u64,
+        /// Expected number of base 10 digits to the right of the decimal place.
+        decimals: u8,
+    },
+    /// Approves a delegate.  A delegate is given the authority over tokens on
+    /// behalf of the source account's owner.
+    ///
+    /// This instruction differs from Approve in that the token mint and
+    /// decimals value is checked by the caller.  This may be useful when
+    /// creating transactions offline or within a hardware wallet.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single owner
+    ///   0. `[writable]` The source account.
+    ///   1. `[]` The token mint.
+    ///   2. `[]` The delegate.
+    ///   3. `[signer]` The source account owner.
+    ///
+    ///   * Multisignature owner
+    ///   0. `[writable]` The source account.
+    ///   1. `[]` The token mint.
+    ///   2. `[]` The delegate.
+    ///   3. `[]` The source account's multisignature owner.
+    ///   4. ..`4+M` `[signer]` M signer accounts
+    ApproveChecked {
+        /// The amount of tokens the delegate is approved for.
+        amount: u64,
+        /// Expected number of base 10 digits to the right of the decimal place.
+        decimals: u8,
+    },
+    /// Mints new tokens to an account.  The native mint does not support
+    /// minting.
+    ///
+    /// This instruction differs from `MintTo` in that the decimals value is
+    /// checked by the caller. This may be useful when creating transactions
+    /// offline or within a hardware wallet.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single authority
+    ///   0. `[writable]` The mint.
+    ///   1. `[writable]` The account to mint tokens to.
+    ///   2. `[signer]` The mint's minting authority.
+    ///
+    ///   * Multisignature authority
+    ///   0. `[writable]` The mint.
+    ///   1. `[writable]` The account to mint tokens to.
+    ///   2. `[]` The mint's multisignature mint-tokens authority.
+    ///   3. ..`3+M` `[signer]` M signer accounts.
+    MintToChecked {
+        /// The amount of new tokens to mint.
+        amount: u64,
+        /// Expected number of base 10 digits to the right of the decimal place.
+        decimals: u8,
+    },
+    /// Burns tokens by removing them from an account.  `BurnChecked` does not
+    /// support accounts associated with the native mint, use `CloseAccount`
+    /// instead.
+    ///
+    /// This instruction differs from Burn in that the decimals value is checked
+    /// by the caller. This may be useful when creating transactions offline or
+    /// within a hardware wallet.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single owner/delegate
+    ///   0. `[writable]` The account to burn from.
+    ///   1. `[writable]` The token mint.
+    ///   2. `[signer]` The account's owner/delegate.
+    ///
+    ///   * Multisignature owner/delegate
+    ///   0. `[writable]` The account to burn from.
+    ///   1. `[writable]` The token mint.
+    ///   2. `[]` The account's multisignature owner/delegate.
+    ///   3. ..`3+M` `[signer]` M signer accounts.
+    BurnChecked {
+        /// The amount of tokens to burn.
+        amount: u64,
+        /// Expected number of base 10 digits to the right of the decimal place.
+        decimals: u8,
+    },
+    /// Like [`TokenInstruction::InitializeAccount`], but the owner pubkey is
+    /// passed via instruction data rather than the accounts list. This
+    /// variant may be preferable when using Cross Program Invocation from
+    /// an instruction that does not need the owner's `AccountInfo`
+    /// otherwise.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   0. `[writable]`  The account to initialize.
+    ///   1. `[]` The mint this account will be associated with.
+    ///   3. `[]` Rent sysvar
+    InitializeAccount2 {
+        /// The new account's owner/multisignature.
+        owner: Pubkey,
+    },
+    /// Given a wrapped / native token account (a token account containing SOL)
+    /// updates its amount field based on the account's underlying `lamports`.
+    /// This is useful if a non-wrapped SOL account uses
+    /// `system_instruction::transfer` to move lamports to a wrapped token
+    /// account, and needs to have its token `amount` field updated.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Using runtime Rent sysvar
+    ///   0. `[writable]`  The native token account to sync with its underlying
+    ///      lamports.
+    ///
+    ///   * Using Rent sysvar account
+    ///   0. `[writable]`  The native token account to sync with its underlying
+    ///      lamports.
+    ///   1. `[]` Rent sysvar.
+    SyncNative,
+    /// Like [`TokenInstruction::InitializeAccount2`], but does not require the
+    /// Rent sysvar to be provided
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   0. `[writable]`  The account to initialize.
+    ///   1. `[]` The mint this account will be associated with.
+    InitializeAccount3 {
+        /// The new account's owner/multisignature.
+        owner: Pubkey,
+    },
+    /// Like [`TokenInstruction::InitializeMultisig`], but does not require the
+    /// Rent sysvar to be provided
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   0. `[writable]` The multisignature account to initialize.
+    ///   1. ..`1+N` `[]` The signer accounts, must equal to N where `1 <= N <=
+    ///      11`.
+    InitializeMultisig2 {
+        /// The number of signers (M) required to validate this multisignature
+        /// account.
+        m: u8,
+    },
+    /// Like [`TokenInstruction::InitializeMint`], but does not require the Rent
+    /// sysvar to be provided
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   0. `[writable]` The mint to initialize.
+    InitializeMint2 {
+        /// Number of base 10 digits to the right of the decimal place.
+        decimals: u8,
+        /// The authority/multisignature to mint tokens.
+        mint_authority: Pubkey,
+        /// The freeze authority/multisignature of the mint.
+        freeze_authority: COption<Pubkey>,
+    },
+    /// Gets the required size of an account for the given mint as a
+    /// little-endian `u64`.
+    ///
+    /// Return data can be fetched using `sol_get_return_data` and deserializing
+    /// the return data as a little-endian `u64`.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   0. `[]` The mint to calculate for
+    GetAccountDataSize, // typically, there's also data, but this program ignores it
+    /// Initialize the Immutable Owner extension for the given token account
+    ///
+    /// Fails if the account has already been initialized, so must be called
+    /// before `InitializeAccount`.
+    ///
+    /// No-ops in this version of the program, but is included for compatibility
+    /// with the Associated Token Account program.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   0. `[writable]`  The account to initialize.
+    ///
+    /// Data expected by this instruction:
+    ///   None
+    InitializeImmutableOwner,
+    /// Convert an Amount of tokens to a `UiAmount` string, using the given
+    /// mint. In this version of the program, the mint can only specify the
+    /// number of decimals.
+    ///
+    /// Fails on an invalid mint.
+    ///
+    /// Return data can be fetched using `sol_get_return_data` and deserialized
+    /// with `String::from_utf8`.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   0. `[]` The mint to calculate for
+    AmountToUiAmount {
+        /// The amount of tokens to reformat.
+        amount: u64,
+    },
+    /// Convert a `UiAmount` of tokens to a little-endian `u64` raw Amount,
+    /// using the given mint. In this version of the program, the mint can
+    /// only specify the number of decimals.
+    ///
+    /// Return data can be fetched using `sol_get_return_data` and deserializing
+    /// the return data as a little-endian `u64`.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   0. `[]` The mint to calculate for
+    UiAmountToAmount {
+        /// The `ui_amount` of tokens to reformat.
+        ui_amount: &'a str,
+    },
+    /// This instruction is to be used to rescue SOL sent to any `TokenProgram`
+    /// owned account by sending them to any other account, leaving behind only
+    /// lamports for rent exemption.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single owner/delegate
+    ///   0. `[writable]` The source account.
+    ///   1. `[writable]` The destination account.
+    ///   2. `[signer]` The source account's owner/delegate.
+    ///
+    ///   * Multisignature owner/delegate
+    ///   0. `[writable]` The source account.
+    ///   1. `[writable]` The destination account.
+    ///   2. `[]` The source account's multisignature owner/delegate.
+    ///   3. `..+M` `[signer]` M signer accounts.
+    WithdrawExcessLamports = 38,
+    /// Transfer lamports from a native SOL account to a destination account.
+    ///
+    /// This is useful to unwrap lamports from a wrapped SOL account.
+    ///
+    /// Accounts expected by this instruction:
+    ///
+    ///   * Single owner/delegate
+    ///   0. `[writable]` The source account.
+    ///   1. `[writable]` The destination account.
+    ///   2. `[signer]` The source account's owner/delegate.
+    ///
+    ///   * Multisignature owner/delegate
+    ///   0. `[writable]` The source account.
+    ///   1. `[writable]` The destination account.
+    ///   2. `[]` The source account's multisignature owner/delegate.
+    ///   3. `..+M` `[signer]` M signer accounts.
+    ///
+    /// Data expected by this instruction:
+    ///
+    ///   - `Option<u64>` The amount of lamports to transfer. When an amount is
+    ///     not specified, the entire balance of the source account will be
+    ///     transferred.
+    UnwrapLamports {
+        /// The amount of lamports to transfer.
+        amount: COption<u64>,
+    } = 45,
+    /// Executes a batch of instructions. The instructions to be executed are
+    /// specified in sequence on the instruction data. Each instruction
+    /// provides:
+    ///   - `u8`: number of accounts
+    ///   - `u8`: instruction data length (includes the discriminator)
+    ///   - `u8`: instruction discriminator
+    ///   - `[u8]`: instruction data
+    ///
+    /// Accounts follow a similar pattern, where accounts for each instruction
+    /// are specified in sequence. Therefore, the number of accounts
+    /// expected by this instruction is variable, i.e., it depends on the
+    /// instructions provided.
+    ///
+    /// Both the number of accounts and instruction data length are used to
+    /// identify the slice of accounts and instruction data for each
+    /// instruction. Since the instruction data length is specified as a `u8`,
+    /// the maximum instruction data length is 255 bytes, which is sufficient
+    /// for all current instructions in the program.
+    ///
+    /// When one or more batched instructions write return data, the batch
+    /// instruction returns the data written by the last instruction that does
+    /// so. That instruction does not have to be the final instruction in the
+    /// batch: later instructions that do not write return data leave the last
+    /// written return data unchanged.
+    ///
+    /// Note that it is not sound to have a `batch` instruction that contains
+    /// other `batch` instruction; an error will be raised when this is
+    /// detected.
+    Batch = 255,
+    // Any new variants also need to be added to program-2022 `TokenInstruction`, so that the
+    // latter remains a superset of this instruction set. New variants also need to be added to
+    // token/js/src/instructions/types.ts to maintain @solana/spl-token compatibility
+}
+impl<'a> TokenInstruction<'a> {
+    /// Unpacks a byte buffer into a
+    /// [`TokenInstruction`](enum.TokenInstruction.html).
+    pub fn unpack(input: &'a [u8]) -> Result<Self, ProgramError> {
+        use TokenError::InvalidInstruction;
+
+        let (&tag, rest) = input.split_first().ok_or(InvalidInstruction)?;
+        Ok(match tag {
+            0 => {
+                let (&decimals, rest) = rest.split_first().ok_or(InvalidInstruction)?;
+                let (mint_authority, rest) = Self::unpack_pubkey(rest)?;
+                let (freeze_authority, _rest) = Self::unpack_pubkey_option(rest)?;
+                Self::InitializeMint {
+                    mint_authority,
+                    freeze_authority,
+                    decimals,
+                }
+            }
+            1 => Self::InitializeAccount,
+            2 => {
+                let &m = rest.first().ok_or(InvalidInstruction)?;
+                Self::InitializeMultisig { m }
+            }
+            3 | 4 | 7 | 8 => {
+                let amount = rest
+                    .get(..8)
+                    .and_then(|slice| slice.try_into().ok())
+                    .map(u64::from_le_bytes)
+                    .ok_or(InvalidInstruction)?;
+                match tag {
+                    3 => Self::Transfer { amount },
+                    4 => Self::Approve { amount },
+                    7 => Self::MintTo { amount },
+                    8 => Self::Burn { amount },
+                    _ => unreachable!(),
+                }
+            }
+            5 => Self::Revoke,
+            6 => {
+                let (authority_type, rest) = rest
+                    .split_first()
+                    .ok_or_else(|| ProgramError::from(InvalidInstruction))
+                    .and_then(|(&t, rest)| Ok((AuthorityType::from(t)?, rest)))?;
+                let (new_authority, _rest) = Self::unpack_pubkey_option(rest)?;
+
+                Self::SetAuthority {
+                    authority_type,
+                    new_authority,
+                }
+            }
+            9 => Self::CloseAccount,
+            10 => Self::FreezeAccount,
+            11 => Self::ThawAccount,
+            12 => {
+                let (amount, decimals, _rest) = Self::unpack_amount_decimals(rest)?;
+                Self::TransferChecked { amount, decimals }
+            }
+            13 => {
+                let (amount, decimals, _rest) = Self::unpack_amount_decimals(rest)?;
+                Self::ApproveChecked { amount, decimals }
+            }
+            14 => {
+                let (amount, decimals, _rest) = Self::unpack_amount_decimals(rest)?;
+                Self::MintToChecked { amount, decimals }
+            }
+            15 => {
+                let (amount, decimals, _rest) = Self::unpack_amount_decimals(rest)?;
+                Self::BurnChecked { amount, decimals }
+            }
+            16 => {
+                let (owner, _rest) = Self::unpack_pubkey(rest)?;
+                Self::InitializeAccount2 { owner }
+            }
+            17 => Self::SyncNative,
+            18 => {
+                let (owner, _rest) = Self::unpack_pubkey(rest)?;
+                Self::InitializeAccount3 { owner }
+            }
+            19 => {
+                let &m = rest.first().ok_or(InvalidInstruction)?;
+                Self::InitializeMultisig2 { m }
+            }
+            20 => {
+                let (&decimals, rest) = rest.split_first().ok_or(InvalidInstruction)?;
+                let (mint_authority, rest) = Self::unpack_pubkey(rest)?;
+                let (freeze_authority, _rest) = Self::unpack_pubkey_option(rest)?;
+                Self::InitializeMint2 {
+                    mint_authority,
+                    freeze_authority,
+                    decimals,
+                }
+            }
+            21 => Self::GetAccountDataSize,
+            22 => Self::InitializeImmutableOwner,
+            23 => {
+                let (amount, _rest) = Self::unpack_u64(rest)?;
+                Self::AmountToUiAmount { amount }
+            }
+            24 => {
+                let ui_amount = std::str::from_utf8(rest).map_err(|_| InvalidInstruction)?;
+                Self::UiAmountToAmount { ui_amount }
+            }
+            38 => Self::WithdrawExcessLamports,
+            45 => {
+                let (amount, _rest) = Self::unpack_u64_option(rest)?;
+                Self::UnwrapLamports { amount }
+            }
+            255 => Self::Batch,
+            _ => return Err(TokenError::InvalidInstruction.into()),
+        })
+    }
+
+    /// Packs a [`TokenInstruction`](enum.TokenInstruction.html) into a byte
+    /// buffer.
+    pub fn pack(&self) -> Vec<u8> {
+        let mut buf = Vec::with_capacity(size_of::<Self>());
+        match self {
+            &Self::InitializeMint {
+                ref mint_authority,
+                ref freeze_authority,
+                decimals,
+            } => {
+                buf.push(0);
+                buf.push(decimals);
+                buf.extend_from_slice(mint_authority.as_ref());
+                Self::pack_pubkey_option(freeze_authority, &mut buf);
+            }
+            Self::InitializeAccount => buf.push(1),
+            &Self::InitializeMultisig { m } => {
+                buf.push(2);
+                buf.push(m);
+            }
+            &Self::Transfer { amount } => {
+                buf.push(3);
+                buf.extend_from_slice(&amount.to_le_bytes());
+            }
+            &Self::Approve { amount } => {
+                buf.push(4);
+                buf.extend_from_slice(&amount.to_le_bytes());
+            }
+            &Self::MintTo { amount } => {
+                buf.push(7);
+                buf.extend_from_slice(&amount.to_le_bytes());
+            }
+            &Self::Burn { amount } => {
+                buf.push(8);
+                buf.extend_from_slice(&amount.to_le_bytes());
+            }
+            Self::Revoke => buf.push(5),
+            Self::SetAuthority {
+                authority_type,
+                ref new_authority,
+            } => {
+                buf.push(6);
+                buf.push(authority_type.into());
+                Self::pack_pubkey_option(new_authority, &mut buf);
+            }
+            Self::CloseAccount => buf.push(9),
+            Self::FreezeAccount => buf.push(10),
+            Self::ThawAccount => buf.push(11),
+            &Self::TransferChecked { amount, decimals } => {
+                buf.push(12);
+                buf.extend_from_slice(&amount.to_le_bytes());
+                buf.push(decimals);
+            }
+            &Self::ApproveChecked { amount, decimals } => {
+                buf.push(13);
+                buf.extend_from_slice(&amount.to_le_bytes());
+                buf.push(decimals);
+            }
+            &Self::MintToChecked { amount, decimals } => {
+                buf.push(14);
+                buf.extend_from_slice(&amount.to_le_bytes());
+                buf.push(decimals);
+            }
+            &Self::BurnChecked { amount, decimals } => {
+                buf.push(15);
+                buf.extend_from_slice(&amount.to_le_bytes());
+                buf.push(decimals);
+            }
+            &Self::InitializeAccount2 { owner } => {
+                buf.push(16);
+                buf.extend_from_slice(owner.as_ref());
+            }
+            &Self::SyncNative => {
+                buf.push(17);
+            }
+            &Self::InitializeAccount3 { owner } => {
+                buf.push(18);
+                buf.extend_from_slice(owner.as_ref());
+            }
+            &Self::InitializeMultisig2 { m } => {
+                buf.push(19);
+                buf.push(m);
+            }
+            &Self::InitializeMint2 {
+                ref mint_authority,
+                ref freeze_authority,
+                decimals,
+            } => {
+                buf.push(20);
+                buf.push(decimals);
+                buf.extend_from_slice(mint_authority.as_ref());
+                Self::pack_pubkey_option(freeze_authority, &mut buf);
+            }
+            &Self::GetAccountDataSize => {
+                buf.push(21);
+            }
+            &Self::InitializeImmutableOwner => {
+                buf.push(22);
+            }
+            &Self::AmountToUiAmount { amount } => {
+                buf.push(23);
+                buf.extend_from_slice(&amount.to_le_bytes());
+            }
+            Self::UiAmountToAmount { ui_amount } => {
+                buf.push(24);
+                buf.extend_from_slice(ui_amount.as_bytes());
+            }
+            &Self::WithdrawExcessLamports => {
+                buf.push(38);
+            }
+            Self::UnwrapLamports { ref amount } => {
+                buf.push(45);
+                Self::pack_u64_option(amount, &mut buf);
+            }
+            &Self::Batch => {
+                buf.push(255);
+            }
+        };
+        buf
+    }
+
+    fn unpack_pubkey(input: &[u8]) -> Result<(Pubkey, &[u8]), ProgramError> {
+        if input.len() >= 32 {
+            let (key, rest) = input.split_at(32);
+            let pk = Pubkey::try_from(key).map_err(|_| TokenError::InvalidInstruction)?;
+            Ok((pk, rest))
+        } else {
+            Err(TokenError::InvalidInstruction.into())
+        }
+    }
+
+    fn unpack_pubkey_option(input: &[u8]) -> Result<(COption<Pubkey>, &[u8]), ProgramError> {
+        match input.split_first() {
+            Option::Some((&0, rest)) => Ok((COption::None, rest)),
+            Option::Some((&1, rest)) if rest.len() >= 32 => {
+                let (key, rest) = rest.split_at(32);
+                let pk = Pubkey::try_from(key).map_err(|_| TokenError::InvalidInstruction)?;
+                Ok((COption::Some(pk), rest))
+            }
+            _ => Err(TokenError::InvalidInstruction.into()),
+        }
+    }
+
+    fn pack_pubkey_option(value: &COption<Pubkey>, buf: &mut Vec<u8>) {
+        match *value {
+            COption::Some(ref key) => {
+                buf.push(1);
+                buf.extend_from_slice(&key.to_bytes());
+            }
+            COption::None => buf.push(0),
+        }
+    }
+
+    fn unpack_u64(input: &[u8]) -> Result<(u64, &[u8]), ProgramError> {
+        let value = input
+            .get(..U64_BYTES)
+            .and_then(|slice| slice.try_into().ok())
+            .map(u64::from_le_bytes)
+            .ok_or(TokenError::InvalidInstruction)?;
+        Ok((value, &input[U64_BYTES..]))
+    }
+
+    fn unpack_u64_option(input: &[u8]) -> Result<(COption<u64>, &[u8]), ProgramError> {
+        match input.split_first() {
+            Option::Some((&0, rest)) => Ok((COption::None, rest)),
+            Option::Some((&1, rest)) if rest.len() >= 8 => {
+                let (amount, rest) = rest
+                    .split_first_chunk::<8>()
+                    .ok_or(TokenError::InvalidInstruction)?;
+                let v = u64::from_le_bytes(*amount);
+                Ok((COption::Some(v), rest))
+            }
+            _ => Err(TokenError::InvalidInstruction.into()),
+        }
+    }
+
+    fn pack_u64_option(value: &COption<u64>, buf: &mut Vec<u8>) {
+        match *value {
+            COption::Some(ref amount) => {
+                buf.push(1);
+                buf.extend_from_slice(&amount.to_le_bytes());
+            }
+            COption::None => buf.push(0),
+        }
+    }
+
+    fn unpack_amount_decimals(input: &[u8]) -> Result<(u64, u8, &[u8]), ProgramError> {
+        let (amount, rest) = Self::unpack_u64(input)?;
+        let (&decimals, rest) = rest.split_first().ok_or(TokenError::InvalidInstruction)?;
+        Ok((amount, decimals, rest))
+    }
+}
+
+/// Specifies the authority type for `SetAuthority` instructions
+#[repr(u8)]
+#[derive(Clone, Debug, PartialEq)]
+pub enum AuthorityType {
+    /// Authority to mint new tokens
+    MintTokens,
+    /// Authority to freeze any account associated with the Mint
+    FreezeAccount,
+    /// Owner of a given token account
+    AccountOwner,
+    /// Authority to close a token account
+    CloseAccount,
+}
+
+impl AuthorityType {
+    fn into(&self) -> u8 {
+        match self {
+            AuthorityType::MintTokens => 0,
+            AuthorityType::FreezeAccount => 1,
+            AuthorityType::AccountOwner => 2,
+            AuthorityType::CloseAccount => 3,
+        }
+    }
+
+    fn from(index: u8) -> Result<Self, ProgramError> {
+        match index {
+            0 => Ok(AuthorityType::MintTokens),
+            1 => Ok(AuthorityType::FreezeAccount),
+            2 => Ok(AuthorityType::AccountOwner),
+            3 => Ok(AuthorityType::CloseAccount),
+            _ => Err(TokenError::InvalidInstruction.into()),
+        }
+    }
+}
+
+/// Creates a `InitializeMint` instruction.
+pub fn initialize_mint(
+    token_program_id: &Pubkey,
+    mint_pubkey: &Pubkey,
+    mint_authority_pubkey: &Pubkey,
+    freeze_authority_pubkey: Option<&Pubkey>,
+    decimals: u8,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let freeze_authority = freeze_authority_pubkey.cloned().into();
+    let data = TokenInstruction::InitializeMint {
+        mint_authority: *mint_authority_pubkey,
+        freeze_authority,
+        decimals,
+    }
+    .pack();
+
+    let accounts = vec![
+        AccountMeta::new(*mint_pubkey, false),
+        AccountMeta::new_readonly(sysvar::rent::id(), false),
+    ];
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `InitializeMint2` instruction.
+pub fn initialize_mint2(
+    token_program_id: &Pubkey,
+    mint_pubkey: &Pubkey,
+    mint_authority_pubkey: &Pubkey,
+    freeze_authority_pubkey: Option<&Pubkey>,
+    decimals: u8,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let freeze_authority = freeze_authority_pubkey.cloned().into();
+    let data = TokenInstruction::InitializeMint2 {
+        mint_authority: *mint_authority_pubkey,
+        freeze_authority,
+        decimals,
+    }
+    .pack();
+
+    let accounts = vec![AccountMeta::new(*mint_pubkey, false)];
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `InitializeAccount` instruction.
+pub fn initialize_account(
+    token_program_id: &Pubkey,
+    account_pubkey: &Pubkey,
+    mint_pubkey: &Pubkey,
+    owner_pubkey: &Pubkey,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::InitializeAccount.pack();
+
+    let accounts = vec![
+        AccountMeta::new(*account_pubkey, false),
+        AccountMeta::new_readonly(*mint_pubkey, false),
+        AccountMeta::new_readonly(*owner_pubkey, false),
+        AccountMeta::new_readonly(sysvar::rent::id(), false),
+    ];
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `InitializeAccount2` instruction.
+pub fn initialize_account2(
+    token_program_id: &Pubkey,
+    account_pubkey: &Pubkey,
+    mint_pubkey: &Pubkey,
+    owner_pubkey: &Pubkey,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::InitializeAccount2 {
+        owner: *owner_pubkey,
+    }
+    .pack();
+
+    let accounts = vec![
+        AccountMeta::new(*account_pubkey, false),
+        AccountMeta::new_readonly(*mint_pubkey, false),
+        AccountMeta::new_readonly(sysvar::rent::id(), false),
+    ];
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `InitializeAccount3` instruction.
+pub fn initialize_account3(
+    token_program_id: &Pubkey,
+    account_pubkey: &Pubkey,
+    mint_pubkey: &Pubkey,
+    owner_pubkey: &Pubkey,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::InitializeAccount3 {
+        owner: *owner_pubkey,
+    }
+    .pack();
+
+    let accounts = vec![
+        AccountMeta::new(*account_pubkey, false),
+        AccountMeta::new_readonly(*mint_pubkey, false),
+    ];
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `InitializeMultisig` instruction.
+pub fn initialize_multisig(
+    token_program_id: &Pubkey,
+    multisig_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+    m: u8,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    if !is_valid_signer_index(m as usize)
+        || !is_valid_signer_index(signer_pubkeys.len())
+        || m as usize > signer_pubkeys.len()
+    {
+        return Err(ProgramError::MissingRequiredSignature);
+    }
+    let data = TokenInstruction::InitializeMultisig { m }.pack();
+
+    let mut accounts = Vec::with_capacity(1 + 1 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*multisig_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(sysvar::rent::id(), false));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, false));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `InitializeMultisig2` instruction.
+pub fn initialize_multisig2(
+    token_program_id: &Pubkey,
+    multisig_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+    m: u8,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    if !is_valid_signer_index(m as usize)
+        || !is_valid_signer_index(signer_pubkeys.len())
+        || m as usize > signer_pubkeys.len()
+    {
+        return Err(ProgramError::MissingRequiredSignature);
+    }
+    let data = TokenInstruction::InitializeMultisig2 { m }.pack();
+
+    let mut accounts = Vec::with_capacity(1 + 1 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*multisig_pubkey, false));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, false));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `Transfer` instruction.
+pub fn transfer(
+    token_program_id: &Pubkey,
+    source_pubkey: &Pubkey,
+    destination_pubkey: &Pubkey,
+    authority_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+    amount: u64,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::Transfer { amount }.pack();
+
+    let mut accounts = Vec::with_capacity(3 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*source_pubkey, false));
+    accounts.push(AccountMeta::new(*destination_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *authority_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates an `Approve` instruction.
+pub fn approve(
+    token_program_id: &Pubkey,
+    source_pubkey: &Pubkey,
+    delegate_pubkey: &Pubkey,
+    owner_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+    amount: u64,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::Approve { amount }.pack();
+
+    let mut accounts = Vec::with_capacity(3 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*source_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(*delegate_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *owner_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `Revoke` instruction.
+pub fn revoke(
+    token_program_id: &Pubkey,
+    source_pubkey: &Pubkey,
+    owner_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::Revoke.pack();
+
+    let mut accounts = Vec::with_capacity(2 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*source_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *owner_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `SetAuthority` instruction.
+pub fn set_authority(
+    token_program_id: &Pubkey,
+    owned_pubkey: &Pubkey,
+    new_authority_pubkey: Option<&Pubkey>,
+    authority_type: AuthorityType,
+    owner_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let new_authority = new_authority_pubkey.cloned().into();
+    let data = TokenInstruction::SetAuthority {
+        authority_type,
+        new_authority,
+    }
+    .pack();
+
+    let mut accounts = Vec::with_capacity(3 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*owned_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *owner_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `MintTo` instruction.
+pub fn mint_to(
+    token_program_id: &Pubkey,
+    mint_pubkey: &Pubkey,
+    account_pubkey: &Pubkey,
+    owner_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+    amount: u64,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::MintTo { amount }.pack();
+
+    let mut accounts = Vec::with_capacity(3 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*mint_pubkey, false));
+    accounts.push(AccountMeta::new(*account_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *owner_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `Burn` instruction.
+pub fn burn(
+    token_program_id: &Pubkey,
+    account_pubkey: &Pubkey,
+    mint_pubkey: &Pubkey,
+    authority_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+    amount: u64,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::Burn { amount }.pack();
+
+    let mut accounts = Vec::with_capacity(3 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*account_pubkey, false));
+    accounts.push(AccountMeta::new(*mint_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *authority_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `CloseAccount` instruction.
+pub fn close_account(
+    token_program_id: &Pubkey,
+    account_pubkey: &Pubkey,
+    destination_pubkey: &Pubkey,
+    owner_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::CloseAccount.pack();
+
+    let mut accounts = Vec::with_capacity(3 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*account_pubkey, false));
+    accounts.push(AccountMeta::new(*destination_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *owner_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `FreezeAccount` instruction.
+pub fn freeze_account(
+    token_program_id: &Pubkey,
+    account_pubkey: &Pubkey,
+    mint_pubkey: &Pubkey,
+    owner_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::FreezeAccount.pack();
+
+    let mut accounts = Vec::with_capacity(3 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*account_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(*mint_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *owner_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `ThawAccount` instruction.
+pub fn thaw_account(
+    token_program_id: &Pubkey,
+    account_pubkey: &Pubkey,
+    mint_pubkey: &Pubkey,
+    owner_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::ThawAccount.pack();
+
+    let mut accounts = Vec::with_capacity(3 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*account_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(*mint_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *owner_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `TransferChecked` instruction.
+#[allow(clippy::too_many_arguments)]
+pub fn transfer_checked(
+    token_program_id: &Pubkey,
+    source_pubkey: &Pubkey,
+    mint_pubkey: &Pubkey,
+    destination_pubkey: &Pubkey,
+    authority_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+    amount: u64,
+    decimals: u8,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::TransferChecked { amount, decimals }.pack();
+
+    let mut accounts = Vec::with_capacity(4 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*source_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(*mint_pubkey, false));
+    accounts.push(AccountMeta::new(*destination_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *authority_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates an `ApproveChecked` instruction.
+#[allow(clippy::too_many_arguments)]
+pub fn approve_checked(
+    token_program_id: &Pubkey,
+    source_pubkey: &Pubkey,
+    mint_pubkey: &Pubkey,
+    delegate_pubkey: &Pubkey,
+    owner_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+    amount: u64,
+    decimals: u8,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::ApproveChecked { amount, decimals }.pack();
+
+    let mut accounts = Vec::with_capacity(4 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*source_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(*mint_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(*delegate_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *owner_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `MintToChecked` instruction.
+pub fn mint_to_checked(
+    token_program_id: &Pubkey,
+    mint_pubkey: &Pubkey,
+    account_pubkey: &Pubkey,
+    owner_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+    amount: u64,
+    decimals: u8,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::MintToChecked { amount, decimals }.pack();
+
+    let mut accounts = Vec::with_capacity(3 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*mint_pubkey, false));
+    accounts.push(AccountMeta::new(*account_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *owner_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `BurnChecked` instruction.
+pub fn burn_checked(
+    token_program_id: &Pubkey,
+    account_pubkey: &Pubkey,
+    mint_pubkey: &Pubkey,
+    authority_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+    amount: u64,
+    decimals: u8,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::BurnChecked { amount, decimals }.pack();
+
+    let mut accounts = Vec::with_capacity(3 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*account_pubkey, false));
+    accounts.push(AccountMeta::new(*mint_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *authority_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `SyncNative` instruction
+pub fn sync_native(
+    token_program_id: &Pubkey,
+    account_pubkey: &Pubkey,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts: vec![AccountMeta::new(*account_pubkey, false)],
+        data: TokenInstruction::SyncNative.pack(),
+    })
+}
+
+/// Creates a `SyncNative` instruction with the Rent sysvar account
+/// added to the accounts list.
+pub fn sync_native_with_rent_sysvar(
+    token_program_id: &Pubkey,
+    account_pubkey: &Pubkey,
+) -> Result<Instruction, ProgramError> {
+    let mut instruction = sync_native(token_program_id, account_pubkey)?;
+    instruction
+        .accounts
+        .push(AccountMeta::new_readonly(sysvar::rent::id(), false));
+
+    Ok(instruction)
+}
+
+/// Creates a `GetAccountDataSize` instruction
+pub fn get_account_data_size(
+    token_program_id: &Pubkey,
+    mint_pubkey: &Pubkey,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts: vec![AccountMeta::new_readonly(*mint_pubkey, false)],
+        data: TokenInstruction::GetAccountDataSize.pack(),
+    })
+}
+
+/// Creates a `InitializeImmutableOwner` instruction
+pub fn initialize_immutable_owner(
+    token_program_id: &Pubkey,
+    account_pubkey: &Pubkey,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts: vec![AccountMeta::new(*account_pubkey, false)],
+        data: TokenInstruction::InitializeImmutableOwner.pack(),
+    })
+}
+
+/// Creates an `AmountToUiAmount` instruction
+pub fn amount_to_ui_amount(
+    token_program_id: &Pubkey,
+    mint_pubkey: &Pubkey,
+    amount: u64,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts: vec![AccountMeta::new_readonly(*mint_pubkey, false)],
+        data: TokenInstruction::AmountToUiAmount { amount }.pack(),
+    })
+}
+
+/// Creates a `UiAmountToAmount` instruction
+pub fn ui_amount_to_amount(
+    token_program_id: &Pubkey,
+    mint_pubkey: &Pubkey,
+    ui_amount: &str,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts: vec![AccountMeta::new_readonly(*mint_pubkey, false)],
+        data: TokenInstruction::UiAmountToAmount { ui_amount }.pack(),
+    })
+}
+
+/// Creates a `WithdrawExcessLamports` instruction
+pub fn withdraw_excess_lamports(
+    token_program_id: &Pubkey,
+    account_pubkey: &Pubkey,
+    destination_pubkey: &Pubkey,
+    authority_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+    let data = TokenInstruction::WithdrawExcessLamports.pack();
+
+    let mut accounts = Vec::with_capacity(3 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*account_pubkey, false));
+    accounts.push(AccountMeta::new(*destination_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *authority_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `UnwrapLamports` instruction
+pub fn unwrap_lamports(
+    token_program_id: &Pubkey,
+    account_pubkey: &Pubkey,
+    destination_pubkey: &Pubkey,
+    authority_pubkey: &Pubkey,
+    signer_pubkeys: &[&Pubkey],
+    amount: Option<u64>,
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+
+    let amount = amount.into();
+    let data = TokenInstruction::UnwrapLamports { amount }.pack();
+
+    let mut accounts = Vec::with_capacity(3 + signer_pubkeys.len());
+    accounts.push(AccountMeta::new(*account_pubkey, false));
+    accounts.push(AccountMeta::new(*destination_pubkey, false));
+    accounts.push(AccountMeta::new_readonly(
+        *authority_pubkey,
+        signer_pubkeys.is_empty(),
+    ));
+    for signer_pubkey in signer_pubkeys.iter() {
+        accounts.push(AccountMeta::new_readonly(**signer_pubkey, true));
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        accounts,
+        data,
+    })
+}
+
+/// Creates a `Batch` instruction
+pub fn batch(
+    token_program_id: &Pubkey,
+    instructions: &[Instruction],
+) -> Result<Instruction, ProgramError> {
+    check_program_account(token_program_id)?;
+
+    let mut data: Vec<u8> = TokenInstruction::Batch.pack();
+    let mut accounts: Vec<AccountMeta> = vec![];
+
+    for instruction in instructions {
+        if token_program_id != &instruction.program_id {
+            return Err(ProgramError::IncorrectProgramId);
+        }
+
+        data.push(instruction.accounts.len() as u8);
+
+        if instruction.data.len() > u8::MAX as usize {
+            return Err(ProgramError::InvalidInstructionData);
+        }
+
+        data.push(instruction.data.len() as u8);
+
+        data.extend_from_slice(&instruction.data);
+        accounts.extend_from_slice(&instruction.accounts);
+    }
+
+    Ok(Instruction {
+        program_id: *token_program_id,
+        data,
+        accounts,
+    })
+}
+
+/// Utility function that checks index is between `MIN_SIGNERS` and
+/// `MAX_SIGNERS`
+pub fn is_valid_signer_index(index: usize) -> bool {
+    (MIN_SIGNERS..=MAX_SIGNERS).contains(&index)
+}
+
+#[cfg(test)]
+mod test {
+    use {super::*, proptest::prelude::*};
+
+    #[test]
+    fn test_instruction_packing() {
+        let check = TokenInstruction::InitializeMint {
+            decimals: 2,
+            mint_authority: Pubkey::new_from_array([1u8; 32]),
+            freeze_authority: COption::None,
+        };
+        let packed = check.pack();
+        let mut expect = Vec::from([0u8, 2]);
+        expect.extend_from_slice(&[1u8; 32]);
+        expect.extend_from_slice(&[0]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::InitializeMint {
+            decimals: 2,
+            mint_authority: Pubkey::new_from_array([2u8; 32]),
+            freeze_authority: COption::Some(Pubkey::new_from_array([3u8; 32])),
+        };
+        let packed = check.pack();
+        let mut expect = vec![0u8, 2];
+        expect.extend_from_slice(&[2u8; 32]);
+        expect.extend_from_slice(&[1]);
+        expect.extend_from_slice(&[3u8; 32]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::InitializeAccount;
+        let packed = check.pack();
+        let expect = Vec::from([1u8]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::InitializeMultisig { m: 1 };
+        let packed = check.pack();
+        let expect = Vec::from([2u8, 1]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::Transfer { amount: 1 };
+        let packed = check.pack();
+        let expect = Vec::from([3u8, 1, 0, 0, 0, 0, 0, 0, 0]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::Approve { amount: 1 };
+        let packed = check.pack();
+        let expect = Vec::from([4u8, 1, 0, 0, 0, 0, 0, 0, 0]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::Revoke;
+        let packed = check.pack();
+        let expect = Vec::from([5u8]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::SetAuthority {
+            authority_type: AuthorityType::FreezeAccount,
+            new_authority: COption::Some(Pubkey::new_from_array([4u8; 32])),
+        };
+        let packed = check.pack();
+        let mut expect = Vec::from([6u8, 1]);
+        expect.extend_from_slice(&[1]);
+        expect.extend_from_slice(&[4u8; 32]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::MintTo { amount: 1 };
+        let packed = check.pack();
+        let expect = Vec::from([7u8, 1, 0, 0, 0, 0, 0, 0, 0]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::Burn { amount: 1 };
+        let packed = check.pack();
+        let expect = Vec::from([8u8, 1, 0, 0, 0, 0, 0, 0, 0]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::CloseAccount;
+        let packed = check.pack();
+        let expect = Vec::from([9u8]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::FreezeAccount;
+        let packed = check.pack();
+        let expect = Vec::from([10u8]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::ThawAccount;
+        let packed = check.pack();
+        let expect = Vec::from([11u8]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::TransferChecked {
+            amount: 1,
+            decimals: 2,
+        };
+        let packed = check.pack();
+        let expect = Vec::from([12u8, 1, 0, 0, 0, 0, 0, 0, 0, 2]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::ApproveChecked {
+            amount: 1,
+            decimals: 2,
+        };
+        let packed = check.pack();
+        let expect = Vec::from([13u8, 1, 0, 0, 0, 0, 0, 0, 0, 2]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::MintToChecked {
+            amount: 1,
+            decimals: 2,
+        };
+        let packed = check.pack();
+        let expect = Vec::from([14u8, 1, 0, 0, 0, 0, 0, 0, 0, 2]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::BurnChecked {
+            amount: 1,
+            decimals: 2,
+        };
+        let packed = check.pack();
+        let expect = Vec::from([15u8, 1, 0, 0, 0, 0, 0, 0, 0, 2]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::InitializeAccount2 {
+            owner: Pubkey::new_from_array([2u8; 32]),
+        };
+        let packed = check.pack();
+        let mut expect = vec![16u8];
+        expect.extend_from_slice(&[2u8; 32]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::SyncNative;
+        let packed = check.pack();
+        let expect = vec![17u8];
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::InitializeAccount3 {
+            owner: Pubkey::new_from_array([2u8; 32]),
+        };
+        let packed = check.pack();
+        let mut expect = vec![18u8];
+        expect.extend_from_slice(&[2u8; 32]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::InitializeMultisig2 { m: 1 };
+        let packed = check.pack();
+        let expect = Vec::from([19u8, 1]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::InitializeMint2 {
+            decimals: 2,
+            mint_authority: Pubkey::new_from_array([1u8; 32]),
+            freeze_authority: COption::None,
+        };
+        let packed = check.pack();
+        let mut expect = Vec::from([20u8, 2]);
+        expect.extend_from_slice(&[1u8; 32]);
+        expect.extend_from_slice(&[0]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::InitializeMint2 {
+            decimals: 2,
+            mint_authority: Pubkey::new_from_array([2u8; 32]),
+            freeze_authority: COption::Some(Pubkey::new_from_array([3u8; 32])),
+        };
+        let packed = check.pack();
+        let mut expect = vec![20u8, 2];
+        expect.extend_from_slice(&[2u8; 32]);
+        expect.extend_from_slice(&[1]);
+        expect.extend_from_slice(&[3u8; 32]);
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::GetAccountDataSize;
+        let packed = check.pack();
+        let expect = vec![21u8];
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::InitializeImmutableOwner;
+        let packed = check.pack();
+        let expect = vec![22u8];
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::AmountToUiAmount { amount: 42 };
+        let packed = check.pack();
+        let expect = vec![23u8, 42, 0, 0, 0, 0, 0, 0, 0];
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::UiAmountToAmount { ui_amount: "0.42" };
+        let packed = check.pack();
+        let expect = vec![24u8, 48, 46, 52, 50];
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::WithdrawExcessLamports;
+        let packed = check.pack();
+        let expect = vec![38u8];
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::UnwrapLamports {
+            amount: COption::Some(42),
+        };
+        let packed = check.pack();
+        let expect = vec![45u8, 1, 42, 0, 0, 0, 0, 0, 0, 0];
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::UnwrapLamports {
+            amount: COption::None,
+        };
+        let packed = check.pack();
+        let expect = vec![45u8, 0];
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+
+        let check = TokenInstruction::Batch;
+        let packed = check.pack();
+        let expect = vec![255u8];
+        assert_eq!(packed, expect);
+        let unpacked = TokenInstruction::unpack(&expect).unwrap();
+        assert_eq!(unpacked, check);
+    }
+
+    #[test]
+    fn test_instruction_unpack_panic() {
+        for i in 0..255u8 {
+            for j in 1..10 {
+                let mut data = vec![0; j];
+                data[0] = i;
+                let _no_panic = TokenInstruction::unpack(&data);
+            }
+        }
+    }
+
+    proptest! {
+        #![proptest_config(ProptestConfig::with_cases(1024))]
+        #[test]
+        fn test_instruction_unpack_proptest(
+            data in prop::collection::vec(any::<u8>(), 0..255)
+        ) {
+            let _no_panic = TokenInstruction::unpack(&data);
+        }
+    }
+}