schematex 0.9.10 → 0.9.12

package/dist/{chunk-IHX6J4HF.js → chunk-32LOZTNP.js}

@@ -756,6 +756,126 @@ var terminal_block = {
     return parts.join("");
   }
 };
+function numAttr(attrs, key, fallback) {
+  const v = Number(attrs?.[key]);
+  return Number.isFinite(v) && v > 0 ? v : fallback;
+}
+function effectiveSymbolDef(type, attrs) {
+  const sym = getSymbol(type);
+  if (!sym) return void 0;
+  if (type !== "enclosure" && type !== "din_rail" && type !== "wire_duct") return sym;
+  if (type === "enclosure") {
+    const w = numAttr(attrs, "width", numAttr(attrs, "w", 240));
+    const h2 = numAttr(attrs, "height", numAttr(attrs, "h", 160));
+    return {
+      ...sym,
+      length: w,
+      anchors: {
+        start: { x: 0, y: 0 },
+        end: { x: w, y: 0 },
+        center: { x: w / 2, y: h2 / 2 },
+        bottom_left: { x: 0, y: h2 },
+        bottom_right: { x: w, y: h2 }
+      }
+    };
+  }
+  const length = numAttr(attrs, "length", 180);
+  const h = type === "wire_duct" ? 22 : 14;
+  return {
+    ...sym,
+    length,
+    anchors: {
+      start: { x: 0, y: 0 },
+      end: { x: length, y: 0 },
+      center: { x: length / 2, y: 0 },
+      bottom_right: { x: length, y: h }
+    }
+  };
+}
+var enclosure = {
+  length: 240,
+  anchors: { start: { x: 0, y: 0 }, end: { x: 240, y: 0 }, bottom_right: { x: 240, y: 160 } },
+  svg: (label, _value, attrs) => {
+    const w = numAttr(attrs, "width", numAttr(attrs, "w", 240));
+    const h = numAttr(attrs, "height", numAttr(attrs, "h", 160));
+    const title2 = label ?? attrs?.title ?? "Panel";
+    return [
+      `<rect x="0" y="0" width="${w}" height="${h}" rx="8" fill="none" class="schematex-circuit-enclosure"/>`,
+      `<rect x="10" y="20" width="${Math.max(10, w - 20)}" height="${Math.max(10, h - 30)}" rx="3" fill="none" class="schematex-circuit-enclosure-inner"/>`,
+      `<text x="${w / 2}" y="15" text-anchor="middle" class="schematex-circuit-panel-label">${title2}</text>`
+    ].join("");
+  }
+};
+var din_rail = {
+  length: 180,
+  anchors: { start: { x: 0, y: 0 }, end: { x: 180, y: 0 } },
+  svg: (_label, _value, attrs) => {
+    const l = numAttr(attrs, "length", 180);
+    const slots = [];
+    for (let x = 8; x < l - 4; x += 16) {
+      slots.push(`<rect x="${x}" y="-3" width="8" height="6" rx="2" class="schematex-circuit-din-slot"/>`);
+    }
+    return [
+      `<rect x="0" y="-7" width="${l}" height="14" rx="2" class="schematex-circuit-din"/>`,
+      ...slots
+    ].join("");
+  }
+};
+var wire_duct = {
+  length: 180,
+  anchors: { start: { x: 0, y: 0 }, end: { x: 180, y: 0 }, bottom_right: { x: 180, y: 22 } },
+  svg: (_label, _value, attrs) => {
+    const l = numAttr(attrs, "length", 180);
+    const teeth = [];
+    for (let x = 8; x < l - 4; x += 12) {
+      teeth.push(`<line x1="${x}" y1="0" x2="${x}" y2="22" class="schematex-circuit-duct-tooth"/>`);
+    }
+    return [
+      `<rect x="0" y="0" width="${l}" height="22" rx="2" class="schematex-circuit-duct"/>`,
+      ...teeth
+    ].join("");
+  }
+};
+var plc = {
+  length: 70,
+  anchors: { start: { x: 0, y: 0 }, end: { x: 70, y: 0 }, pwr: { x: 0, y: 24 }, out: { x: 70, y: 24 } },
+  svg: (label, _value, attrs) => {
+    const title2 = label ?? attrs?.model ?? "PLC";
+    const leds = [12, 24, 36, 48, 60].map((x) => `<circle cx="${x}" cy="28" r="2.2" class="schematex-circuit-panel-led"/>`).join("");
+    return [
+      `<rect x="0" y="-20" width="70" height="56" rx="4" fill="white" ${BODY}/>`,
+      `<text x="35" y="-2" text-anchor="middle" class="schematex-circuit-meter">${title2}</text>`,
+      leds
+    ].join("");
+  }
+};
+var pilot_light = {
+  length: 22,
+  anchors: { start: { x: 0, y: 0 }, end: { x: 22, y: 0 } },
+  svg: (label, _value) => [
+    `<circle cx="11" cy="0" r="10" class="schematex-circuit-panel-light"/>`,
+    `<circle cx="11" cy="0" r="4" class="schematex-circuit-panel-led"/>`,
+    label ? `<text x="11" y="20" text-anchor="middle" class="schematex-circuit-pol">${label}</text>` : ""
+  ].join("")
+};
+var selector_switch = {
+  length: 26,
+  anchors: { start: { x: 0, y: 0 }, end: { x: 26, y: 0 } },
+  svg: (label) => [
+    `<circle cx="13" cy="0" r="12" fill="white" ${BODY}/>`,
+    `<line x1="7" y1="5" x2="19" y2="-5" ${BODY}/>`,
+    label ? `<text x="13" y="22" text-anchor="middle" class="schematex-circuit-pol">${label}</text>` : ""
+  ].join("")
+};
+var emergency_stop = {
+  length: 30,
+  anchors: { start: { x: 0, y: 0 }, end: { x: 30, y: 0 } },
+  svg: (label) => [
+    `<circle cx="15" cy="0" r="14" class="schematex-circuit-estop"/>`,
+    `<text x="15" y="4" text-anchor="middle" class="schematex-circuit-meter">E</text>`,
+    label ? `<text x="15" y="25" text-anchor="middle" class="schematex-circuit-pol">${label}</text>` : ""
+  ].join("")
+};
 var relay_coil = {
   length: 40,
   anchors: { start: { x: 0, y: 0 }, end: { x: 40, y: 0 } },
@@ -1357,6 +1477,13 @@ var SYMBOLS = {
   antenna,
   generic_ic,
   terminal_block,
+  enclosure,
+  din_rail,
+  wire_duct,
+  plc,
+  pilot_light,
+  selector_switch,
+  emergency_stop,
   "555_timer": timer_555,
   voltage_regulator,
   // Industrial control / power electrical (IEC 60617)
@@ -1455,7 +1582,15 @@ var TYPE_ALIASES = {
   tb: "terminal_block",
   junction_box: "terminal_block",
   jbox: "terminal_block",
-  enclosure: "terminal_block"
+  enclosure: "enclosure",
+  cabinet: "enclosure",
+  panel: "enclosure",
+  dinrail: "din_rail",
+  din_rail: "din_rail",
+  wireduct: "wire_duct",
+  wire_duct: "wire_duct",
+  trunking: "wire_duct",
+  plc: "plc"
 };
 var GROUND_REF = /^(0|gnd|ground|earth|pe|agnd|dgnd|gnda|gndd|vss|com)(_\w+|\d+)?$/i;
 function isGroundRef(s) {
@@ -1719,6 +1854,14 @@ var COMPONENT_TYPES = /* @__PURE__ */ new Set([
   "voltage_regulator",
   "dc_dc_converter",
   "555_timer",
+  "terminal_block",
+  "enclosure",
+  "din_rail",
+  "wire_duct",
+  "plc",
+  "pilot_light",
+  "selector_switch",
+  "emergency_stop",
   "voltage_source",
   "current_source",
   "ac_source",
@@ -1773,6 +1916,25 @@ var ALIASES = {
   ic: "generic_ic",
   reg: "voltage_regulator",
   timer555: "555_timer",
+  terminal: "terminal_block",
+  tb: "terminal_block",
+  junction_box: "terminal_block",
+  jbox: "terminal_block",
+  cabinet: "enclosure",
+  panel: "enclosure",
+  backplate: "enclosure",
+  dinrail: "din_rail",
+  "din-rail": "din_rail",
+  duct: "wire_duct",
+  wireduct: "wire_duct",
+  trunking: "wire_duct",
+  controller: "plc",
+  indicator: "pilot_light",
+  pilot: "pilot_light",
+  selector: "selector_switch",
+  estop: "emergency_stop",
+  e_stop: "emergency_stop",
+  "e-stop": "emergency_stop",
   therm: "thermistor_ntc",
   ntc: "thermistor_ntc",
   ptc: "thermistor_ptc",
@@ -2164,6 +2326,8 @@ function rotatePoint(p, angleDeg) {
 }
 function resolveAnchorRef(ref, byId, nets) {
   if (ref === "origin") return { x: 0, y: 0 };
+  const coord = /^@?(-?\d+(?:\.\d+)?),(-?\d+(?:\.\d+)?)$/.exec(ref.trim());
+  if (coord) return { x: Number(coord[1]), y: Number(coord[2]) };
   if (nets.has(ref)) return nets.get(ref);
   const dot = ref.indexOf(".");
   if (dot < 0) {
@@ -2188,7 +2352,7 @@ function layoutCircuit(ast) {
       const resolved = resolveAnchorRef(comp.at, byId, nets);
       if (resolved) startPt = resolved;
     }
-    const sym = getSymbol(comp.componentType);
+    const sym = effectiveSymbolDef(comp.componentType, comp.attrs) ?? getSymbol(comp.componentType);
     const rot = rotationDeg(comp.direction);
     if (comp.componentType === "wire") {
       const len = parseInt(comp.attrs?.length ?? "20", 10);
@@ -2658,6 +2822,16 @@ function renderCircuit(ast, config) {
 .schematex-circuit-meter { font: bold 12px sans-serif; fill: ${t.stroke}; }
 .schematex-circuit-title { font: 700 16px sans-serif; fill: ${t.text}; }
 .schematex-circuit-err { stroke: ${t.error}; fill: ${t.error}; }
+.schematex-circuit-enclosure { stroke: ${t.stroke}; stroke-width: 2; stroke-dasharray: 8 5; fill: ${t.bg}; }
+.schematex-circuit-enclosure-inner { stroke: ${t.textMuted}; stroke-width: 1; stroke-dasharray: 4 3; fill: none; }
+.schematex-circuit-panel-label { font: 700 11px system-ui, sans-serif; fill: ${t.text}; }
+.schematex-circuit-din { fill: ${t.bg}; stroke: ${t.stroke}; stroke-width: 1.4; }
+.schematex-circuit-din-slot { fill: ${t.textMuted}; opacity: 0.5; }
+.schematex-circuit-duct { fill: none; stroke: ${t.textMuted}; stroke-width: 1.2; stroke-dasharray: 3 2; }
+.schematex-circuit-duct-tooth { stroke: ${t.textMuted}; stroke-width: 0.8; opacity: 0.65; }
+.schematex-circuit-panel-led { fill: ${t.accent}; stroke: ${t.stroke}; stroke-width: 0.8; }
+.schematex-circuit-panel-light { fill: ${t.bg}; stroke: ${t.stroke}; stroke-width: 1.5; }
+.schematex-circuit-estop { fill: ${t.error}; stroke: ${t.stroke}; stroke-width: 1.4; }
 `.trim();
   const titleBar = ast.title ? text(
     {
@@ -2706,5 +2880,5 @@ var circuit = {
 };
 
 export { EXTRA_SYMBOLS, SYMBOLS, circuit, layoutCircuit, layoutCircuitNetlist, lintCircuit, parseCircuit, parseNetlist, renderCircuit };
-//# sourceMappingURL=chunk-IHX6J4HF.js.map
-//# sourceMappingURL=chunk-IHX6J4HF.js.map
+//# sourceMappingURL=chunk-32LOZTNP.js.map
+//# sourceMappingURL=chunk-32LOZTNP.js.map