rregex 1.11.0 → 1.13.0

package/lib/cf.d.ts

@@ -60,54 +60,6 @@ export type Match = {
   value: string
 }
 
-/**
- * Represents the capture groups for a single match.
- *
- * Capture groups refer to parts of a regex enclosed in parentheses. They can
- * be optionally named. The purpose of capture groups is to be able to
- * reference different parts of a match based on the original pattern. For
- * example, say you want to match the individual letters in a 5-letter word:
- *
- * ```text
- * (?<first>\w)(\w)(?:\w)\w(?<last>\w)
- * ```
- *
- * This regex has 4 capture groups:
- *
- * * The group at index `0` corresponds to the overall match. It is always
- * present in every match and never has a name.
- * * The group at index `1` with name `first` corresponding to the first
- * letter.
- * * The group at index `2` with no name corresponding to the second letter.
- * * The group at index `3` with name `last` corresponding to the fifth and
- * last letter.
- *
- * Notice that `(?:\w)` was not listed above as a capture group despite it
- * being enclosed in parentheses. That's because `(?:pattern)` is a special
- * syntax that permits grouping but *without* capturing. The reason for not
- * treating it as a capture is that tracking and reporting capture groups
- * requires additional state that may lead to slower searches. So using as few
- * capture groups as possible can help performance. (Although the difference
- * in performance of a couple of capture groups is likely immaterial.)
- *
- * # Example
- *
- * ```typescript
- * import { RRegex } from "rregex"
- *
- * const re = new RRegex("(?<first>\\w)(\\w)(?:\\w)\\w(?<last>\\w)");
- * const caps = re.captures("toady");
- * expect(caps.get[0].value).toBe("toady");
- * expect(caps.name["first"].value).toBe("t");
- * expect(caps.get[2].value).toBe("o");
- * expect(caps.name["last"].value).toBe("y");
- * ```
- */
-export type Captures = {
-  get: Match[]
-  name: Record<string, Match>
-}
-
 /**
  * A high-level intermediate representation (HIR) for a regular expression.
  */
@@ -633,6 +585,54 @@ export type Repetition = {
   sub: Hir
 }
 
+/**
+ * Represents the capture groups for a single match.
+ *
+ * Capture groups refer to parts of a regex enclosed in parentheses. They can
+ * be optionally named. The purpose of capture groups is to be able to
+ * reference different parts of a match based on the original pattern. For
+ * example, say you want to match the individual letters in a 5-letter word:
+ *
+ * ```text
+ * (?<first>\w)(\w)(?:\w)\w(?<last>\w)
+ * ```
+ *
+ * This regex has 4 capture groups:
+ *
+ * * The group at index `0` corresponds to the overall match. It is always
+ * present in every match and never has a name.
+ * * The group at index `1` with name `first` corresponding to the first
+ * letter.
+ * * The group at index `2` with no name corresponding to the second letter.
+ * * The group at index `3` with name `last` corresponding to the fifth and
+ * last letter.
+ *
+ * Notice that `(?:\w)` was not listed above as a capture group despite it
+ * being enclosed in parentheses. That's because `(?:pattern)` is a special
+ * syntax that permits grouping but *without* capturing. The reason for not
+ * treating it as a capture is that tracking and reporting capture groups
+ * requires additional state that may lead to slower searches. So using as few
+ * capture groups as possible can help performance. (Although the difference
+ * in performance of a couple of capture groups is likely immaterial.)
+ *
+ * # Example
+ *
+ * ```typescript
+ * import { RRegex } from "rregex"
+ *
+ * const re = new RRegex("(?<first>\\w)(\\w)(?:\\w)\\w(?<last>\\w)");
+ * const caps = re.captures("toady");
+ * expect(caps.get[0].value).toBe("toady");
+ * expect(caps.name["first"].value).toBe("t");
+ * expect(caps.get[2].value).toBe("o");
+ * expect(caps.name["last"].value).toBe("y");
+ * ```
+ */
+export type Captures = {
+  get: Match[]
+  name: Record<string, Match>
+}
+
 /**
  * The high-level intermediate representation for a capturing group.
  *
@@ -700,38 +700,6 @@ export type Capture = {
  */
 export class RRegex {
   free(): void;
-  /**
-   * Compiles a regular expression. Once compiled, it can be used repeatedly
-   * to search, split or replace text in a string.
-   *
-   * If an invalid expression is given, then an error is returned.
-   */
-  constructor(re: string);
-  /**
-   * Returns true if and only if there is a match for the regex in the
-   * string given.
-   *
-   * It is recommended to use this method if all you need to do is test
-   * a match, since the underlying matching engine may be able to do less
-   * work.
-   *
-   * # Example
-   *
-   * Test if some text contains at least one word with exactly 13
-   * Unicode word characters:
-   *
-   * ```typescript
-   * import { RRegex } from "rregex"
-   *
-   * const text = "I categorically deny having triskaidekaphobia."
-   * expect(new RRegex("\\b\\w{13}\\b").is_match(text)).toBe(true)
-   * ```
-   *
-   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.is_match
-   * @param {string} text - The string against which to match the regular expression
-   * @return {boolean}
-   */
-  isMatch(text: string): boolean;
   /**
    * Returns the same as is_match, but starts the search at the given offset.
    * The significance of the starting point is that it takes the surrounding
@@ -745,121 +713,20 @@ export class RRegex {
    */
   isMatchAt(text: string, start: number): boolean;
   /**
-   * Returns the start and end byte range of the leftmost-first match in
-   * `text`. If no match exists, then `undefined` is returned.
-   *
-   * Note that this should only be used if you want to discover the position
-   * of the match. Testing the existence of a match is faster if you use
-   * `isMatch`.
-   *
-   * # Example
-   *
-   * Find the start and end location of the first word with exactly 13
-   * Unicode word characters:
-   *
-   * ```typescript
-   * import { RRegex } from "rregex"
-   *
-   * const text = "I categorically deny having triskaidekaphobia."
-   * const m = new RRegex("\\b\\w{13}\\b").find(text)
-   * expect(m.start).toBe(2)
-   * expect(m.end).toBe(15)
-   * ```
-   *
-   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.find
-   * @param {string} text - The string against which to match the regular expression
-   * @return {Match}
-   */
-  find(text: string): Match | undefined;
-  /**
-   * Returns the same as find, but starts the search at the given
-   * offset.
-   *
-   * The significance of the starting point is that it takes the surrounding
-   * context into consideration. For example, the `\A` anchor can only
-   * match when `start == 0`.
-   *
-   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.find_at
-   * @param {string} text - The string against which to match the regular expression
-   * @param {number} start - Zero-based index at which to start matching
-   * @returns {Match}
-   */
-  findAt(text: string, start: number): Match | undefined;
-  /**
-   * Returns an array for each successive non-overlapping match in `text``,
-   * returning the start and end byte indices with respect to `text`.
-   *
-   * # Example
-   *
-   * Find the start and end location of every word with exactly 13 Unicode
-   * word characters:
-   *
-   * ```typescript
-   * import { RRegex } from "rregex"
-   *
-   * const text = "Retroactively relinquishing remunerations is reprehensible."
-   * const matches = new RRegex("\\b\\w{13}\\b").findAll(text)
-   * ```
-   *
-   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.find_iter
-   * @param {string} text - The string against which to match the regular expression
-   * @returns {Match}
-   */
-  findAll(text: string): Match[];
-  /**
-   * Returns a list of the capture names in this regex.
-   *
-   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.capture_names
-   */
-  captureNames(): (string | null)[];
-  /**
-   * Returns the capture groups corresponding to the leftmost-first
-   * match in `text`. Capture group `0` always corresponds to the entire
-   * match. If no match is found, then `undefined` is returned.
-   *
-   * You should only use `captures` if you need access to the location of
-   * capturing group matches. Otherwise, `find` is faster for discovering
-   * the location of the overall match.
-   *
-   * # Examples
-   *
-   * Say you have some text with movie names and their release years,
-   * like "'Citizen Kane' (1941)". It'd be nice if we could search for text
-   * looking like that, while also extracting the movie name and its release
-   * year separately.
-   *
-   * ```typescript
-   * import { RRegex } from "rregex"
-   *
-   * const re = new RRegex("'([^']+)'\\s+\\((\\d{4})\)")
-   * const text = "Not my favorite movie: 'Citizen Kane' (1941)."
-   * const caps = re.captures(text)
-   * expect(caps.get[1].value).toBe("Citizen Kane")
-   * expect(caps.get[2].value).toBe("1941")
-   * expect(caps.get[0].value).toBe("'Citizen Kane' (1941)")
-   * ```
-   *
-   * Note that the full match is at capture group `0`. Each subsequent
-   * capture group is indexed by the order of its opening `(`.
-   *
-   * We can make this example a bit clearer by using *named* capture groups:
-   *
-   * ```typescript
-   * import { RRegex } from "rregex"
+   * Replaces all non-overlapping matches in `text` with the replacement
+   * provided. This is the same as calling `replacen` with `limit` set to
+   * `0`.
    *
-   * const re = new RRegex("'(?P<title>[^']+)'\\s+\\((?P<year>\\d{4})\)")
-   * const text = "Not my favorite movie: 'Citizen Kane' (1941)."
-   * const caps = re.captures(text)
-   * expect(caps.name["title"].value).toBe("Citizen Kane")
-   * expect(caps.name["year"].value).toBe("1941")
-   * expect(caps.get[0].value).toBe("'Citizen Kane' (1941)")
-   * ```
+   * See the documentation for `replace` for details on how to access
+   * capturing group matches in the replacement string.
    *
-   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.captures
+   * See the documentation for `replace` for details on how to access capturing group matches in the replacement string.
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.replace_all
    * @param {string} text - The string against which to match the regular expression
-   * @returns {Captures|undefined}
+   * @param {string} rep - It's a string, it will replace the substring matched by `pattern`.
+   * @returns {string}
    */
-  captures(text: string): Captures | undefined;
+  replaceAll(text: string, rep: string): string;
   /**
    * Returns a list with all the non-overlapping capture groups matched
    * in `text`. This is operationally the same as `findAll`, except it
@@ -926,12 +793,168 @@ export class RRegex {
    */
   capturesLength(): number;
   /**
-   * Replaces the leftmost-first match with the replacement provided.
-   * The replacement can be a regular string (where `$N` and `$name` are
-   * expanded to match capture groups) or a function that takes the matches'
-   * `Captures` and returns the replaced string.
-   *
-   * If no match is found, then a copy of the string is returned unchanged.
+   * Returns a list of the capture names in this regex.
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.capture_names
+   */
+  captureNames(): (string | null)[];
+  /**
+   * Returns the end location of a match in the text given.
+   *
+   * This method may have the same performance characteristics as
+   * `isMatch`, except it provides an end location for a match. In
+   * particular, the location returned *may be shorter* than the proper end
+   * of the leftmost-first match that you would find via `Regex.find`.
+   *
+   * Note that it is not guaranteed that this routine finds the shortest or
+   * "earliest" possible match. Instead, the main idea of this API is that
+   * it returns the offset at the point at which the internal regex engine
+   * has determined that a match has occurred. This may vary depending on
+   * which internal regex engine is used, and thus, the offset itself may
+   * change.
+   *
+   * # Example
+   *
+   * Typically, `a+` would match the entire first sequence of `a` in some
+   * text, but `shortest_match` can give up as soon as it sees the first
+   * `a`.
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const text = "aaaaa"
+   * const = new RRegex("a+").shortest_match(text)
+   * expect(pos).toBe(1)
+   * ```
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.shortest_match
+   * @param {string} text - The string against which to match the regular expression
+   * @returns {number|undefined}
+   */
+  shortestMatch(text: string): number | undefined;
+  /**
+   * Returns the same as `shortest_match`, but starts the search at the
+   * given offset.
+   *
+   * The significance of the starting point is that it takes the surrounding
+   * context into consideration. For example, the `\A` anchor can only match
+   * when `start == 0`.
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.shortest_match_at
+   * @param {string} text - The string against which to match the regular expression
+   * @param {number} start - Zero-based index at which to start matching
+   * @returns {number|undefined}
+   */
+  shortestMatchAt(text: string, start: number): number | undefined;
+  /**
+   * Compiles a regular expression. Once compiled, it can be used repeatedly
+   * to search, split or replace text in a string.
+   *
+   * If an invalid expression is given, then an error is returned.
+   */
+  constructor(re: string);
+  /**
+   * Returns the start and end byte range of the leftmost-first match in
+   * `text`. If no match exists, then `undefined` is returned.
+   *
+   * Note that this should only be used if you want to discover the position
+   * of the match. Testing the existence of a match is faster if you use
+   * `isMatch`.
+   *
+   * # Example
+   *
+   * Find the start and end location of the first word with exactly 13
+   * Unicode word characters:
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const text = "I categorically deny having triskaidekaphobia."
+   * const m = new RRegex("\\b\\w{13}\\b").find(text)
+   * expect(m.start).toBe(2)
+   * expect(m.end).toBe(15)
+   * ```
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.find
+   * @param {string} text - The string against which to match the regular expression
+   * @return {Match}
+   */
+  find(text: string): Match | undefined;
+  /**
+   * Returns an iterator of substrings of `text` delimited by a match of the
+   * regular expression. Namely, each element of the iterator corresponds to
+   * text that *isn't* matched by the regular expression.
+   *
+   * This method will *not* copy the text given.
+   *
+   * # Example
+   *
+   * To split a string delimited by arbitrary amounts of spaces or tabs:
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const re = new RRegex(r"[ \\t]+")
+   * const fields = re.split("a b \t  c\td    e")
+   * expect(fields).toEqual(["a", "b", "c", "d", "e"])
+   * ```
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.split
+   * @param {string} text - The string against which to match the regular expression
+   * @returns {string[]}
+   */
+  split(text: string): string[];
+  /**
+   * Returns an iterator of at most `limit` substrings of `text` delimited
+   * by a match of the regular expression. (A `limit` of `0` will return no
+   * substrings.) Namely, each element of the iterator corresponds to text
+   * that *isn't* matched by the regular expression. The remainder of the
+   * string that is not split will be the last element in the iterator.
+   *
+   * This method will *not* copy the text given.
+   *
+   * # Example
+   *
+   * Get the first two words in some text:
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const re = new RRegex(r"\\W+")
+   * const fields = re.splitn("Hey! How are you?", 3)
+   * expect(fields).toEqual(["Hey", "How", "are you?"])
+   * ```
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.splitn
+   * @param {string} text - The string against which to match the regular expression
+   * @param {number} limit - Max number result elements
+   * @returns {string[]}
+   */
+  splitn(text: string, limit: number): string[];
+  /**
+   * Returns the regular expression into a high level intermediate
+   * representation.
+   */
+  syntax(): Hir;
+  /**
+   * Returns the same as find, but starts the search at the given
+   * offset.
+   *
+   * The significance of the starting point is that it takes the surrounding
+   * context into consideration. For example, the `\A` anchor can only
+   * match when `start == 0`.
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.find_at
+   * @param {string} text - The string against which to match the regular expression
+   * @param {number} start - Zero-based index at which to start matching
+   * @returns {Match}
+   */
+  findAt(text: string, start: number): Match | undefined;
+  /**
+   * Replaces the leftmost-first match with the replacement provided.
+   * The replacement can be a regular string (where `$N` and `$name` are
+   * expanded to match capture groups) or a function that takes the matches'
+   * `Captures` and returns the replaced string.
+   *
+   * If no match is found, then a copy of the string is returned unchanged.
    *
    * # Replacement string syntax
    *
@@ -1002,137 +1025,114 @@ export class RRegex {
    */
   replace(text: string, rep: string): string;
   /**
-   * Replaces at most `limit` non-overlapping matches in `text` with the
-   * replacement provided. If `limit` is 0, then all non-overlapping matches
-   * are replaced.
+   * Returns the capture groups corresponding to the leftmost-first
+   * match in `text`. Capture group `0` always corresponds to the entire
+   * match. If no match is found, then `undefined` is returned.
    *
-   * See the documentation for `replace` for details on how to access
-   * capturing group matches in the replacement string.
+   * You should only use `captures` if you need access to the location of
+   * capturing group matches. Otherwise, `find` is faster for discovering
+   * the location of the overall match.
    *
-   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.replacen
-   * @param {string} text - The string against which to match the regular expression
-   * @param {number} limit - Max number of replacement
-   * @param {string} rep - It's a string, it will replace the substring matched by `pattern`.
-   * @returns {string}
-   */
-  replacen(text: string, limit: number, rep: string): string;
-  /**
-   * Replaces all non-overlapping matches in `text` with the replacement
-   * provided. This is the same as calling `replacen` with `limit` set to
-   * `0`.
+   * # Examples
    *
-   * See the documentation for `replace` for details on how to access
-   * capturing group matches in the replacement string.
+   * Say you have some text with movie names and their release years,
+   * like "'Citizen Kane' (1941)". It'd be nice if we could search for text
+   * looking like that, while also extracting the movie name and its release
+   * year separately.
    *
-   * See the documentation for `replace` for details on how to access capturing group matches in the replacement string.
-   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.replace_all
-   * @param {string} text - The string against which to match the regular expression
-   * @param {string} rep - It's a string, it will replace the substring matched by `pattern`.
-   * @returns {string}
-   */
-  replaceAll(text: string, rep: string): string;
-  /**
-   * Returns an iterator of substrings of `text` delimited by a match of the
-   * regular expression. Namely, each element of the iterator corresponds to
-   * text that *isn't* matched by the regular expression.
+   * ```typescript
+   * import { RRegex } from "rregex"
    *
-   * This method will *not* copy the text given.
+   * const re = new RRegex("'([^']+)'\\s+\\((\\d{4})\)")
+   * const text = "Not my favorite movie: 'Citizen Kane' (1941)."
+   * const caps = re.captures(text)
+   * expect(caps.get[1].value).toBe("Citizen Kane")
+   * expect(caps.get[2].value).toBe("1941")
+   * expect(caps.get[0].value).toBe("'Citizen Kane' (1941)")
+   * ```
    *
-   * # Example
+   * Note that the full match is at capture group `0`. Each subsequent
+   * capture group is indexed by the order of its opening `(`.
    *
-   * To split a string delimited by arbitrary amounts of spaces or tabs:
+   * We can make this example a bit clearer by using *named* capture groups:
    *
    * ```typescript
    * import { RRegex } from "rregex"
    *
-   * const re = new RRegex(r"[ \\t]+")
-   * const fields = re.split("a b \t  c\td    e")
-   * expect(fields).toEqual(["a", "b", "c", "d", "e"])
+   * const re = new RRegex("'(?P<title>[^']+)'\\s+\\((?P<year>\\d{4})\)")
+   * const text = "Not my favorite movie: 'Citizen Kane' (1941)."
+   * const caps = re.captures(text)
+   * expect(caps.name["title"].value).toBe("Citizen Kane")
+   * expect(caps.name["year"].value).toBe("1941")
+   * expect(caps.get[0].value).toBe("'Citizen Kane' (1941)")
    * ```
    *
-   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.split
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.captures
    * @param {string} text - The string against which to match the regular expression
-   * @returns {string[]}
+   * @returns {Captures|undefined}
    */
-  split(text: string): (string)[];
+  captures(text: string): Captures | undefined;
   /**
-   * Returns an iterator of at most `limit` substrings of `text` delimited
-   * by a match of the regular expression. (A `limit` of `0` will return no
-   * substrings.) Namely, each element of the iterator corresponds to text
-   * that *isn't* matched by the regular expression. The remainder of the
-   * string that is not split will be the last element in the iterator.
-   *
-   * This method will *not* copy the text given.
+   * Returns an array for each successive non-overlapping match in `text``,
+   * returning the start and end byte indices with respect to `text`.
    *
    * # Example
    *
-   * Get the first two words in some text:
+   * Find the start and end location of every word with exactly 13 Unicode
+   * word characters:
    *
    * ```typescript
    * import { RRegex } from "rregex"
    *
-   * const re = new RRegex(r"\\W+")
-   * const fields = re.splitn("Hey! How are you?", 3)
-   * expect(fields).toEqual(["Hey", "How", "are you?"])
+   * const text = "Retroactively relinquishing remunerations is reprehensible."
+   * const matches = new RRegex("\\b\\w{13}\\b").findAll(text)
    * ```
-   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.splitn
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.find_iter
    * @param {string} text - The string against which to match the regular expression
-   * @param {number} limit - Max number result elements
-   * @returns {string[]}
+   * @returns {Match}
    */
-  splitn(text: string, limit: number): (string)[];
+  findAll(text: string): Match[];
   /**
-   * Returns the end location of a match in the text given.
-   *
-   * This method may have the same performance characteristics as
-   * `isMatch`, except it provides an end location for a match. In
-   * particular, the location returned *may be shorter* than the proper end
-   * of the leftmost-first match that you would find via `Regex.find`.
+   * Returns true if and only if there is a match for the regex in the
+   * string given.
    *
-   * Note that it is not guaranteed that this routine finds the shortest or
-   * "earliest" possible match. Instead, the main idea of this API is that
-   * it returns the offset at the point at which the internal regex engine
-   * has determined that a match has occurred. This may vary depending on
-   * which internal regex engine is used, and thus, the offset itself may
-   * change.
+   * It is recommended to use this method if all you need to do is test
+   * a match, since the underlying matching engine may be able to do less
+   * work.
    *
    * # Example
    *
-   * Typically, `a+` would match the entire first sequence of `a` in some
-   * text, but `shortest_match` can give up as soon as it sees the first
-   * `a`.
+   * Test if some text contains at least one word with exactly 13
+   * Unicode word characters:
    *
    * ```typescript
    * import { RRegex } from "rregex"
    *
-   * const text = "aaaaa"
-   * const = new RRegex("a+").shortest_match(text)
-   * expect(pos).toBe(1)
+   * const text = "I categorically deny having triskaidekaphobia."
+   * expect(new RRegex("\\b\\w{13}\\b").is_match(text)).toBe(true)
    * ```
    *
-   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.shortest_match
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.is_match
    * @param {string} text - The string against which to match the regular expression
-   * @returns {number|undefined}
+   * @return {boolean}
    */
-  shortestMatch(text: string): number | undefined;
+  isMatch(text: string): boolean;
   /**
-   * Returns the same as `shortest_match`, but starts the search at the
-   * given offset.
+   * Replaces at most `limit` non-overlapping matches in `text` with the
+   * replacement provided. If `limit` is 0, then all non-overlapping matches
+   * are replaced.
    *
-   * The significance of the starting point is that it takes the surrounding
-   * context into consideration. For example, the `\A` anchor can only match
-   * when `start == 0`.
-   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.shortest_match_at
+   * See the documentation for `replace` for details on how to access
+   * capturing group matches in the replacement string.
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.replacen
    * @param {string} text - The string against which to match the regular expression
-   * @param {number} start - Zero-based index at which to start matching
-   * @returns {number|undefined}
-   */
-  shortestMatchAt(text: string, start: number): number | undefined;
-  /**
-   * Returns the regular expression into a high level intermediate
-   * representation.
+   * @param {number} limit - Max number of replacement
+   * @param {string} rep - It's a string, it will replace the substring matched by `pattern`.
+   * @returns {string}
    */
-  syntax(): Hir;
+  replacen(text: string, limit: number, rep: string): string;
   /**
    * Returns a string representing the regular expression
    */
@@ -1170,38 +1170,6 @@ export class RRegexSet {
    * ```
    */
   constructor(list: Array<any>);
-  /**
-   * Returns true if and only if one of the regexes in this set matches
-   * the text given.
-   *
-   * This method should be preferred if you only need to test whether any
-   * of the regexes in the set should match, but don't care about *which*
-   * regexes matched. This is because the underlying matching engine will
-   * quit immediately after seeing the first match instead of continuing to
-   * find all matches.
-   *
-   * Note that as with searches using `Regex`, the expression is unanchored
-   * by default. That is, if the regex does not start with `^` or `\A`, or
-   * end with `$` or `\z`, then it is permitted to match anywhere in the
-   * text.
-   *
-   * # Example
-   *
-   * Tests whether a set matches some text:
-   *
-   * ```typescript
-   * import { RegexSet } from "rregex"
-   *
-   * const set = new RegexSet(["\\w+", "\\d+"])
-   * expect(set.is_match("foo")).toBe(true)
-   * expect(!set.is_match("☃")).toBe(false)
-   * ```
-   *
-   * @see https://docs.rs/regex/latest/regex/struct.RegexSet.html#method.is_match
-   * @param {string} text - The string against which to match the regular expression
-   * @return {boolean}
-   */
-  isMatch(text: string): boolean;
   /**
    * Returns the set of regular expressions that match in the given text.
    *
@@ -1241,6 +1209,38 @@ export class RRegexSet {
    * @return {number[]}
    */
   matches(text: string): number[];
+  /**
+   * Returns true if and only if one of the regexes in this set matches
+   * the text given.
+   *
+   * This method should be preferred if you only need to test whether any
+   * of the regexes in the set should match, but don't care about *which*
+   * regexes matched. This is because the underlying matching engine will
+   * quit immediately after seeing the first match instead of continuing to
+   * find all matches.
+   *
+   * Note that as with searches using `Regex`, the expression is unanchored
+   * by default. That is, if the regex does not start with `^` or `\A`, or
+   * end with `$` or `\z`, then it is permitted to match anywhere in the
+   * text.
+   *
+   * # Example
+   *
+   * Tests whether a set matches some text:
+   *
+   * ```typescript
+   * import { RegexSet } from "rregex"
+   *
+   * const set = new RegexSet(["\\w+", "\\d+"])
+   * expect(set.is_match("foo")).toBe(true)
+   * expect(!set.is_match("☃")).toBe(false)
+   * ```
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.RegexSet.html#method.is_match
+   * @param {string} text - The string against which to match the regular expression
+   * @return {boolean}
+   */
+  isMatch(text: string): boolean;
 }
 
 export type InitInput = RequestInfo | URL | Response | BufferSource | WebAssembly.Module;
@@ -1248,38 +1248,38 @@ export type InitInput = RequestInfo | URL | Response | BufferSource | WebAssembl
 export interface InitOutput {
   readonly memory: WebAssembly.Memory;
   readonly __wbg_rregex_free: (a: number, b: number) => void;
-  readonly rregex_new: (a: number, b: number) => [number, number, number];
-  readonly rregex_isMatch: (a: number, b: number, c: number) => number;
-  readonly rregex_isMatchAt: (a: number, b: number, c: number, d: number) => number;
-  readonly rregex_find: (a: number, b: number, c: number) => [number, number, number];
-  readonly rregex_findAt: (a: number, b: number, c: number, d: number) => [number, number, number];
-  readonly rregex_findAll: (a: number, b: number, c: number) => [number, number, number];
   readonly rregex_captureNames: (a: number) => [number, number];
   readonly rregex_captures: (a: number, b: number, c: number) => [number, number, number];
   readonly rregex_capturesAll: (a: number, b: number, c: number) => [number, number, number];
   readonly rregex_capturesLength: (a: number) => number;
+  readonly rregex_find: (a: number, b: number, c: number) => [number, number, number];
+  readonly rregex_findAll: (a: number, b: number, c: number) => [number, number, number];
+  readonly rregex_findAt: (a: number, b: number, c: number, d: number) => [number, number, number];
+  readonly rregex_isMatch: (a: number, b: number, c: number) => number;
+  readonly rregex_isMatchAt: (a: number, b: number, c: number, d: number) => number;
+  readonly rregex_new: (a: number, b: number) => [number, number, number];
   readonly rregex_replace: (a: number, b: number, c: number, d: number, e: number) => [number, number];
-  readonly rregex_replacen: (a: number, b: number, c: number, d: number, e: number, f: number) => [number, number];
   readonly rregex_replaceAll: (a: number, b: number, c: number, d: number, e: number) => [number, number];
-  readonly rregex_split: (a: number, b: number, c: number) => [number, number];
-  readonly rregex_splitn: (a: number, b: number, c: number, d: number) => [number, number];
+  readonly rregex_replacen: (a: number, b: number, c: number, d: number, e: number, f: number) => [number, number];
   readonly rregex_shortestMatch: (a: number, b: number, c: number) => number;
   readonly rregex_shortestMatchAt: (a: number, b: number, c: number, d: number) => number;
+  readonly rregex_split: (a: number, b: number, c: number) => [number, number];
+  readonly rregex_splitn: (a: number, b: number, c: number, d: number) => [number, number];
   readonly rregex_syntax: (a: number) => [number, number, number];
   readonly rregex_toString: (a: number) => [number, number];
   readonly __wbg_rregexset_free: (a: number, b: number) => void;
-  readonly rregexset_new: (a: any) => [number, number, number];
+  readonly escape: (a: number, b: number) => [number, number];
   readonly rregexset_isMatch: (a: number, b: number, c: number) => number;
   readonly rregexset_matches: (a: number, b: number, c: number) => [number, number];
-  readonly escape: (a: number, b: number) => [number, number];
+  readonly rregexset_new: (a: any) => [number, number, number];
   readonly __wbindgen_exn_store: (a: number) => void;
   readonly __externref_table_alloc: () => number;
   readonly __wbindgen_export_2: WebAssembly.Table;
   readonly __wbindgen_malloc: (a: number, b: number) => number;
   readonly __wbindgen_realloc: (a: number, b: number, c: number, d: number) => number;
+  readonly __wbindgen_free: (a: number, b: number, c: number) => void;
   readonly __externref_table_dealloc: (a: number) => void;
   readonly __externref_drop_slice: (a: number, b: number) => void;
-  readonly __wbindgen_free: (a: number, b: number, c: number) => void;
   readonly __wbindgen_start: () => void;
 }
 
@@ -1313,6 +1313,6 @@ export const metadata: {
   ],
   "homepage": "http://rregex.dev",
   "repository": "https://github.com/2fd/rregex",
-  "regex": "1.11.1",
-  "regex-syntax": "0.8.5"
+  "regex": "1.13.1",
+  "regex-syntax": "0.8.11"
 }