rregex 1.10.12 → 1.10.13

package/lib/types.d.ts

@@ -1,13 +1,11 @@
 /* tslint:disable */
 /* eslint-disable */
 /**
-* Escapes all regular expression meta characters in `text`.
-*
-* The string returned may be safely used as a literal in a regular
-* expression.
-* @param {string} text
-* @returns {string}
-*/
+ * Escapes all regular expression meta characters in `text`.
+ *
+ * The string returned may be safely used as a literal in a regular
+ * expression.
+ */
 export function escape(text: string): string;
 /**
  * Represents a single match of a regex in a haystack.
@@ -62,54 +60,6 @@ export type Match = {
   value: string
 }
 
-/**
- * Represents the capture groups for a single match.
- *
- * Capture groups refer to parts of a regex enclosed in parentheses. They can
- * be optionally named. The purpose of capture groups is to be able to
- * reference different parts of a match based on the original pattern. For
- * example, say you want to match the individual letters in a 5-letter word:
- *
- * ```text
- * (?<first>\w)(\w)(?:\w)\w(?<last>\w)
- * ```
- *
- * This regex has 4 capture groups:
- *
- * * The group at index `0` corresponds to the overall match. It is always
- * present in every match and never has a name.
- * * The group at index `1` with name `first` corresponding to the first
- * letter.
- * * The group at index `2` with no name corresponding to the second letter.
- * * The group at index `3` with name `last` corresponding to the fifth and
- * last letter.
- *
- * Notice that `(?:\w)` was not listed above as a capture group despite it
- * being enclosed in parentheses. That's because `(?:pattern)` is a special
- * syntax that permits grouping but *without* capturing. The reason for not
- * treating it as a capture is that tracking and reporting capture groups
- * requires additional state that may lead to slower searches. So using as few
- * capture groups as possible can help performance. (Although the difference
- * in performance of a couple of capture groups is likely immaterial.)
- *
- * # Example
- *
- * ```typescript
- * import { RRegex } from "rregex"
- *
- * const re = new RRegex("(?<first>\\w)(\\w)(?:\\w)\\w(?<last>\\w)");
- * const caps = re.captures("toady");
- * expect(caps.get[0].value).toBe("toady");
- * expect(caps.name["first"].value).toBe("t");
- * expect(caps.get[2].value).toBe("o");
- * expect(caps.name["last"].value).toBe("y");
- * ```
- */
-export type Captures = {
-  get: Match[]
-  name: Record<string, Match>
-}
-
 /**
  * A high-level intermediate representation (HIR) for a regular expression.
  */
@@ -635,6 +585,54 @@ export type Repetition = {
   sub: Hir
 }
 
+/**
+ * Represents the capture groups for a single match.
+ *
+ * Capture groups refer to parts of a regex enclosed in parentheses. They can
+ * be optionally named. The purpose of capture groups is to be able to
+ * reference different parts of a match based on the original pattern. For
+ * example, say you want to match the individual letters in a 5-letter word:
+ *
+ * ```text
+ * (?<first>\w)(\w)(?:\w)\w(?<last>\w)
+ * ```
+ *
+ * This regex has 4 capture groups:
+ *
+ * * The group at index `0` corresponds to the overall match. It is always
+ * present in every match and never has a name.
+ * * The group at index `1` with name `first` corresponding to the first
+ * letter.
+ * * The group at index `2` with no name corresponding to the second letter.
+ * * The group at index `3` with name `last` corresponding to the fifth and
+ * last letter.
+ *
+ * Notice that `(?:\w)` was not listed above as a capture group despite it
+ * being enclosed in parentheses. That's because `(?:pattern)` is a special
+ * syntax that permits grouping but *without* capturing. The reason for not
+ * treating it as a capture is that tracking and reporting capture groups
+ * requires additional state that may lead to slower searches. So using as few
+ * capture groups as possible can help performance. (Although the difference
+ * in performance of a couple of capture groups is likely immaterial.)
+ *
+ * # Example
+ *
+ * ```typescript
+ * import { RRegex } from "rregex"
+ *
+ * const re = new RRegex("(?<first>\\w)(\\w)(?:\\w)\\w(?<last>\\w)");
+ * const caps = re.captures("toady");
+ * expect(caps.get[0].value).toBe("toady");
+ * expect(caps.name["first"].value).toBe("t");
+ * expect(caps.get[2].value).toBe("o");
+ * expect(caps.name["last"].value).toBe("y");
+ * ```
+ */
+export type Captures = {
+  get: Match[]
+  name: Record<string, Match>
+}
+
 /**
  * The high-level intermediate representation for a capturing group.
  *
@@ -660,630 +658,629 @@ export type Capture = {
 }
 
 /**
-* A compiled regular expression for matching Unicode strings.
-*
-* A `RRegex` can be used to search haystacks, split haystacks into substrings
-* or replace substrings in a haystack with a different substring. All
-* searching is done with an implicit `(?s:.)*?` at the beginning and end of
-* an pattern. To force an expression to match the whole string (or a prefix
-* or a suffix), you must use an anchor like `^` or `$` (or `\A` and `\z`).
-*
-* While this library will handle Unicode strings (whether in the regular
-* expression or in the haystack), all positions returned are **byte
-* offsets**. Every byte offset is guaranteed to be at a Unicode code point
-* boundary. That is, all offsets returned by the `RRegex` API are guaranteed
-* to be ranges that can slice an `Uint8Array` created with a TextEncoder.
-*
-* # Example: slicing over UTF strings
-*
-* ```typescript
-* import { RRegex } from "rregex"
-*
-* const re = new RRegex("ä")
-* const m = re.find("äöü") // { start: 0, end: 2 }
-*
-* const buff = new TextEncoder().encode("äöü")
-* const slice = buff.slice(m.start, m.end)
-* expect(new TextDecoder().decode(slice)).toBe("ä")
-* ```
-*
-* # Example: find the offsets of a US phone number:
-*
-* ```typescript
-* import { RRegex } from "rregex"
-*
-* const re = new RRegex("[0-9]{3}-[0-9]{3}-[0-9]{4}");
-* const m = re.find("phone: 111-222-3333");
-* expect(m.start).toBe(7);
-* expect(m.end).toBe(19);
-* ```
-*
-* @see https://docs.rs/regex/latest/regex/
-*/
+ * A compiled regular expression for matching Unicode strings.
+ *
+ * A `RRegex` can be used to search haystacks, split haystacks into substrings
+ * or replace substrings in a haystack with a different substring. All
+ * searching is done with an implicit `(?s:.)*?` at the beginning and end of
+ * an pattern. To force an expression to match the whole string (or a prefix
+ * or a suffix), you must use an anchor like `^` or `$` (or `\A` and `\z`).
+ *
+ * While this library will handle Unicode strings (whether in the regular
+ * expression or in the haystack), all positions returned are **byte
+ * offsets**. Every byte offset is guaranteed to be at a Unicode code point
+ * boundary. That is, all offsets returned by the `RRegex` API are guaranteed
+ * to be ranges that can slice an `Uint8Array` created with a TextEncoder.
+ *
+ * # Example: slicing over UTF strings
+ *
+ * ```typescript
+ * import { RRegex } from "rregex"
+ *
+ * const re = new RRegex("ä")
+ * const m = re.find("äöü") // { start: 0, end: 2 }
+ *
+ * const buff = new TextEncoder().encode("äöü")
+ * const slice = buff.slice(m.start, m.end)
+ * expect(new TextDecoder().decode(slice)).toBe("ä")
+ * ```
+ *
+ * # Example: find the offsets of a US phone number:
+ *
+ * ```typescript
+ * import { RRegex } from "rregex"
+ *
+ * const re = new RRegex("[0-9]{3}-[0-9]{3}-[0-9]{4}");
+ * const m = re.find("phone: 111-222-3333");
+ * expect(m.start).toBe(7);
+ * expect(m.end).toBe(19);
+ * ```
+ *
+ * @see https://docs.rs/regex/latest/regex/
+ */
 export class RRegex {
   free(): void;
-/**
-* Compiles a regular expression. Once compiled, it can be used repeatedly
-* to search, split or replace text in a string.
-*
-* If an invalid expression is given, then an error is returned.
-* @param {string} re
-*/
-  constructor(re: string);
-/**
-* Returns true if and only if there is a match for the regex in the
-* string given.
-*
-* It is recommended to use this method if all you need to do is test
-* a match, since the underlying matching engine may be able to do less
-* work.
-*
-* # Example
-*
-* Test if some text contains at least one word with exactly 13
-* Unicode word characters:
-*
-* ```typescript
-* import { RRegex } from "rregex"
-*
-* const text = "I categorically deny having triskaidekaphobia."
-* expect(new RRegex("\\b\\w{13}\\b").is_match(text)).toBe(true)
-* ```
-*
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.is_match
-* @param {string} text - The string against which to match the regular expression
-* @return {boolean}
-*/
-  isMatch(text: string): boolean;
-/**
-* Returns the same as is_match, but starts the search at the given offset.
-* The significance of the starting point is that it takes the surrounding
-* context into consideration. For example, the `\A` anchor can only match
-* when `start == 0`.
-*
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.is_match_at
-* @param {string} text - The string against which to match the regular expression
-* @param {number} start - Zero-based index at which to start matching
-* @return {boolean}
-*/
+  /**
+   * Returns the same as is_match, but starts the search at the given offset.
+   * The significance of the starting point is that it takes the surrounding
+   * context into consideration. For example, the `\A` anchor can only match
+   * when `start == 0`.
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.is_match_at
+   * @param {string} text - The string against which to match the regular expression
+   * @param {number} start - Zero-based index at which to start matching
+   * @return {boolean}
+   */
   isMatchAt(text: string, start: number): boolean;
-/**
-* Returns the start and end byte range of the leftmost-first match in
-* `text`. If no match exists, then `undefined` is returned.
-*
-* Note that this should only be used if you want to discover the position
-* of the match. Testing the existence of a match is faster if you use
-* `isMatch`.
-*
-* # Example
-*
-* Find the start and end location of the first word with exactly 13
-* Unicode word characters:
-*
-* ```typescript
-* import { RRegex } from "rregex"
-*
-* const text = "I categorically deny having triskaidekaphobia."
-* const m = new RRegex("\\b\\w{13}\\b").find(text)
-* expect(m.start).toBe(2)
-* expect(m.end).toBe(15)
-* ```
-*
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.find
-* @param {string} text - The string against which to match the regular expression
-* @return {Match}
-*/
-  find(text: string): Match | undefined;
-/**
-* Returns the same as find, but starts the search at the given
-* offset.
-*
-* The significance of the starting point is that it takes the surrounding
-* context into consideration. For example, the `\A` anchor can only
-* match when `start == 0`.
-*
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.find_at
-* @param {string} text - The string against which to match the regular expression
-* @param {number} start - Zero-based index at which to start matching
-* @returns {Match}
-*/
-  findAt(text: string, start: number): Match | undefined;
-/**
-* Returns an array for each successive non-overlapping match in `text``,
-* returning the start and end byte indices with respect to `text`.
-*
-* # Example
-*
-* Find the start and end location of every word with exactly 13 Unicode
-* word characters:
-*
-* ```typescript
-* import { RRegex } from "rregex"
-*
-* const text = "Retroactively relinquishing remunerations is reprehensible."
-* const matches = new RRegex("\\b\\w{13}\\b").findAll(text)
-* ```
-*
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.find_iter
-* @param {string} text - The string against which to match the regular expression
-* @returns {Match}
-*/
-  findAll(text: string): Match[];
-/**
-* Returns a list of the capture names in this regex.
-*
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.capture_names
-*/
-  captureNames(): (string | null)[];
-/**
-* Returns the capture groups corresponding to the leftmost-first
-* match in `text`. Capture group `0` always corresponds to the entire
-* match. If no match is found, then `undefined` is returned.
-*
-* You should only use `captures` if you need access to the location of
-* capturing group matches. Otherwise, `find` is faster for discovering
-* the location of the overall match.
-*
-* # Examples
-*
-* Say you have some text with movie names and their release years,
-* like "'Citizen Kane' (1941)". It'd be nice if we could search for text
-* looking like that, while also extracting the movie name and its release
-* year separately.
-*
-* ```typescript
-* import { RRegex } from "rregex"
-*
-* const re = new RRegex("'([^']+)'\\s+\\((\\d{4})\)")
-* const text = "Not my favorite movie: 'Citizen Kane' (1941)."
-* const caps = re.captures(text)
-* expect(caps.get[1].value).toBe("Citizen Kane")
-* expect(caps.get[2].value).toBe("1941")
-* expect(caps.get[0].value).toBe("'Citizen Kane' (1941)")
-* ```
-*
-* Note that the full match is at capture group `0`. Each subsequent
-* capture group is indexed by the order of its opening `(`.
-*
-* We can make this example a bit clearer by using *named* capture groups:
-*
-* ```typescript
-* import { RRegex } from "rregex"
-*
-* const re = new RRegex("'(?P<title>[^']+)'\\s+\\((?P<year>\\d{4})\)")
-* const text = "Not my favorite movie: 'Citizen Kane' (1941)."
-* const caps = re.captures(text)
-* expect(caps.name["title"].value).toBe("Citizen Kane")
-* expect(caps.name["year"].value).toBe("1941")
-* expect(caps.get[0].value).toBe("'Citizen Kane' (1941)")
-* ```
-*
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.captures
-* @param {string} text - The string against which to match the regular expression
-* @returns {Captures|undefined}
-*/
-  captures(text: string): Captures | undefined;
-/**
-* Returns a list with all the non-overlapping capture groups matched
-* in `text`. This is operationally the same as `findAll`, except it
-* returns information about capturing group matches.
-*
-* # Example
-*
-* We can use this to find all movie titles and their release years in
-* some text, where the movie is formatted like "'Title' (xxxx)":
-*
-* ```typescript
-* import { RRegex } from "rregex"
-*
-* const re = new RRegex("'(?P<title>[^']+)'\\s+\\((?P<year>\\d{4})\\)")
-* const text = "'Citizen Kane' (1941), 'The Wizard of Oz' (1939), 'M' (1931)."
-* for caps of re.captures_iter(text) {
-*     console.log(
-*         "Movie:", caps.name["title"].value, ","
-*         "Released:", caps.name["year"].value
-*     );
-* }
-* // Output:
-* // Movie: Citizen Kane, Released: 1941
-* // Movie: The Wizard of Oz, Released: 1939
-* // Movie: M, Released: 1931
-* ```
-*
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.captures_iter
-* @param {string} text - The string against which to match the regular expression
-* @returns {Captures[]}
-*/
+  /**
+   * Replaces all non-overlapping matches in `text` with the replacement
+   * provided. This is the same as calling `replacen` with `limit` set to
+   * `0`.
+   *
+   * See the documentation for `replace` for details on how to access
+   * capturing group matches in the replacement string.
+   *
+   * See the documentation for `replace` for details on how to access capturing group matches in the replacement string.
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.replace_all
+   * @param {string} text - The string against which to match the regular expression
+   * @param {string} rep - It's a string, it will replace the substring matched by `pattern`.
+   * @returns {string}
+   */
+  replaceAll(text: string, rep: string): string;
+  /**
+   * Returns a list with all the non-overlapping capture groups matched
+   * in `text`. This is operationally the same as `findAll`, except it
+   * returns information about capturing group matches.
+   *
+   * # Example
+   *
+   * We can use this to find all movie titles and their release years in
+   * some text, where the movie is formatted like "'Title' (xxxx)":
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const re = new RRegex("'(?P<title>[^']+)'\\s+\\((?P<year>\\d{4})\\)")
+   * const text = "'Citizen Kane' (1941), 'The Wizard of Oz' (1939), 'M' (1931)."
+   * for caps of re.captures_iter(text) {
+   *     console.log(
+   *         "Movie:", caps.name["title"].value, ","
+   *         "Released:", caps.name["year"].value
+   *     );
+   * }
+   * // Output:
+   * // Movie: Citizen Kane, Released: 1941
+   * // Movie: The Wizard of Oz, Released: 1939
+   * // Movie: M, Released: 1931
+   * ```
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.captures_iter
+   * @param {string} text - The string against which to match the regular expression
+   * @returns {Captures[]}
+   */
   capturesAll(text: string): Captures[];
-/**
-* Returns the number of captures.
-*
-* This includes all named and unnamed groups, including the implicit
-* unnamed group that is always present and corresponds to the entire match.
-*
-* Since the implicit unnamed group is always included in this length, the
-* length returned is guaranteed to be greater than zero.
-*
-* ## Example
-*
-* ```typescript
-*  import { RRegex } from "rregex"
-*
-*  const re1 = new RRegex("(?P<y>\\d{4})-(?P<m>\\d{2})-(?P<d>\\d{2})")
-*  expect(re1.capturesLength()).toEqual(4)
-*
-*  const re2 = new RRegex("foo")
-*  expect(re2.capturesLength()).toEqual(1)
-*
-*  const re3 = new RRegex("(foo)")
-*  expect(re3.capturesLength()).toEqual(2)
-*
-*  const re4 = new RRegex("(?<a>.(?<b>.))(.)(?:.)(?<c>.)")
-*  expect(re4.capturesLength()).toEqual(5)
-*
-*  const re5 = new RRegex("[a&&b]")
-*  expect(re5.capturesLength()).toEqual(1)
-* ```
-*
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.captures_len
-* @returns {number}
-*/
+  /**
+   * Returns the number of captures.
+   *
+   * This includes all named and unnamed groups, including the implicit
+   * unnamed group that is always present and corresponds to the entire match.
+   *
+   * Since the implicit unnamed group is always included in this length, the
+   * length returned is guaranteed to be greater than zero.
+   *
+   * ## Example
+   *
+   * ```typescript
+   *  import { RRegex } from "rregex"
+   *
+   *  const re1 = new RRegex("(?P<y>\\d{4})-(?P<m>\\d{2})-(?P<d>\\d{2})")
+   *  expect(re1.capturesLength()).toEqual(4)
+   *
+   *  const re2 = new RRegex("foo")
+   *  expect(re2.capturesLength()).toEqual(1)
+   *
+   *  const re3 = new RRegex("(foo)")
+   *  expect(re3.capturesLength()).toEqual(2)
+   *
+   *  const re4 = new RRegex("(?<a>.(?<b>.))(.)(?:.)(?<c>.)")
+   *  expect(re4.capturesLength()).toEqual(5)
+   *
+   *  const re5 = new RRegex("[a&&b]")
+   *  expect(re5.capturesLength()).toEqual(1)
+   * ```
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.captures_len
+   */
   capturesLength(): number;
-/**
-* Replaces the leftmost-first match with the replacement provided.
-* The replacement can be a regular string (where `$N` and `$name` are
-* expanded to match capture groups) or a function that takes the matches'
-* `Captures` and returns the replaced string.
-*
-* If no match is found, then a copy of the string is returned unchanged.
-*
-* # Replacement string syntax
-*
-* All instances of `$name` in the replacement text is replaced with the
-* corresponding capture group `name`.
-*
-* `name` may be an integer corresponding to the index of the
-* capture group (counted by order of opening parenthesis where `0` is the
-* entire match) or it can be a name (consisting of letters, digits or
-* underscores) corresponding to a named capture group.
-*
-* If `name` isn't a valid capture group (whether the name doesn't exist
-* or isn't a valid index), then it is replaced with the empty string.
-*
-* The longest possible name is used. e.g., `$1a` looks up the capture
-* group named `1a` and not the capture group at index `1`. To exert more
-* precise control over the name, use braces, e.g., `${1}a`.
-*
-* To write a literal `$` use `$$`.
-*
-* # Examples
-*
-* Note that this function is polymorphic with respect to the replacement.
-* In typical usage, this can just be a normal string:
-*
-* ```typescript
-* import { RRegex } from "rregex"
-*
-* const re = new RRegex("[^01]+")
-* expect(re.replace("1078910", "").toBe("1010")
-* ```
-*
-* Here's the example using this expansion technique with named capture
-* groups:
-*
-* ```typescript
-* import { RRegex } from "rregex"
-*
-* const re = new RRegex("(?P<last>[^,\\s]+),\\s+(?P<first>\\S+)")
-* const result = re.replace("Springsteen, Bruce", "$first $last")
-* expect(result).toBe("Bruce Springsteen")
-* ```
-*
-* Note that using `$2` instead of `$first` or `$1` instead of `$last`
-* would produce the same result. To write a literal `$` use `$$`.
-*
-* Sometimes the replacement string requires use of curly braces to
-* delineate a capture group replacement and surrounding literal text.
-* For example, if we wanted to join two words together with an
-* underscore:
-*
-* ```typescript
-* import { RRegex } from "rregex"
-*
-* const re = new RRegex("(?P<first>\\w+)\\s+(?P<second>\\w+)")
-* const result = re.replace("deep fried", "${first}_$second")
-* expect(result).toBe("deep_fried")
-* ```
-*
-* Without the curly braces, the capture group name `first_` would be
-* used, and since it doesn't exist, it would be replaced with the empty
-* string.
-*
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.replace
-* @param {string} text - The string against which to match the regular expression
-* @param {string} rep - It's a string, it will replace the substring matched by `pattern`.
-* @returns {string}
-*/
-  replace(text: string, rep: string): string;
-/**
-* Replaces at most `limit` non-overlapping matches in `text` with the
-* replacement provided. If `limit` is 0, then all non-overlapping matches
-* are replaced.
-*
-* See the documentation for `replace` for details on how to access
-* capturing group matches in the replacement string.
-*
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.replacen
-* @param {string} text - The string against which to match the regular expression
-* @param {number} limit - Max number of replacement
-* @param {string} rep - It's a string, it will replace the substring matched by `pattern`.
-* @returns {string}
-*/
-  replacen(text: string, limit: number, rep: string): string;
-/**
-* Replaces all non-overlapping matches in `text` with the replacement
-* provided. This is the same as calling `replacen` with `limit` set to
-* `0`.
-*
-* See the documentation for `replace` for details on how to access
-* capturing group matches in the replacement string.
-*
-* See the documentation for `replace` for details on how to access capturing group matches in the replacement string.
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.replace_all
-* @param {string} text - The string against which to match the regular expression
-* @param {string} rep - It's a string, it will replace the substring matched by `pattern`.
-* @returns {string}
-*/
-  replaceAll(text: string, rep: string): string;
-/**
-* Returns an iterator of substrings of `text` delimited by a match of the
-* regular expression. Namely, each element of the iterator corresponds to
-* text that *isn't* matched by the regular expression.
-*
-* This method will *not* copy the text given.
-*
-* # Example
-*
-* To split a string delimited by arbitrary amounts of spaces or tabs:
-*
-* ```typescript
-* import { RRegex } from "rregex"
-*
-* const re = new RRegex(r"[ \\t]+")
-* const fields = re.split("a b \t  c\td    e")
-* expect(fields).toEqual(["a", "b", "c", "d", "e"])
-* ```
-*
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.split
-* @param {string} text - The string against which to match the regular expression
-* @returns {string[]}
-*/
-  split(text: string): (string)[];
-/**
-* Returns an iterator of at most `limit` substrings of `text` delimited
-* by a match of the regular expression. (A `limit` of `0` will return no
-* substrings.) Namely, each element of the iterator corresponds to text
-* that *isn't* matched by the regular expression. The remainder of the
-* string that is not split will be the last element in the iterator.
-*
-* This method will *not* copy the text given.
-*
-* # Example
-*
-* Get the first two words in some text:
-*
-* ```typescript
-* import { RRegex } from "rregex"
-*
-* const re = new RRegex(r"\\W+")
-* const fields = re.splitn("Hey! How are you?", 3)
-* expect(fields).toEqual(["Hey", "How", "are you?"])
-* ```
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.splitn
-* @param {string} text - The string against which to match the regular expression
-* @param {number} limit - Max number result elements
-* @returns {string[]}
-*/
-  splitn(text: string, limit: number): (string)[];
-/**
-* Returns the end location of a match in the text given.
-*
-* This method may have the same performance characteristics as
-* `isMatch`, except it provides an end location for a match. In
-* particular, the location returned *may be shorter* than the proper end
-* of the leftmost-first match that you would find via `Regex.find`.
-*
-* Note that it is not guaranteed that this routine finds the shortest or
-* "earliest" possible match. Instead, the main idea of this API is that
-* it returns the offset at the point at which the internal regex engine
-* has determined that a match has occurred. This may vary depending on
-* which internal regex engine is used, and thus, the offset itself may
-* change.
-*
-* # Example
-*
-* Typically, `a+` would match the entire first sequence of `a` in some
-* text, but `shortest_match` can give up as soon as it sees the first
-* `a`.
-*
-* ```typescript
-* import { RRegex } from "rregex"
-*
-* const text = "aaaaa"
-* const = new RRegex("a+").shortest_match(text)
-* expect(pos).toBe(1)
-* ```
-*
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.shortest_match
-* @param {string} text - The string against which to match the regular expression
-* @returns {number|undefined}
-*/
+  /**
+   * Returns a list of the capture names in this regex.
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.capture_names
+   */
+  captureNames(): (string | null)[];
+  /**
+   * Returns the end location of a match in the text given.
+   *
+   * This method may have the same performance characteristics as
+   * `isMatch`, except it provides an end location for a match. In
+   * particular, the location returned *may be shorter* than the proper end
+   * of the leftmost-first match that you would find via `Regex.find`.
+   *
+   * Note that it is not guaranteed that this routine finds the shortest or
+   * "earliest" possible match. Instead, the main idea of this API is that
+   * it returns the offset at the point at which the internal regex engine
+   * has determined that a match has occurred. This may vary depending on
+   * which internal regex engine is used, and thus, the offset itself may
+   * change.
+   *
+   * # Example
+   *
+   * Typically, `a+` would match the entire first sequence of `a` in some
+   * text, but `shortest_match` can give up as soon as it sees the first
+   * `a`.
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const text = "aaaaa"
+   * const = new RRegex("a+").shortest_match(text)
+   * expect(pos).toBe(1)
+   * ```
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.shortest_match
+   * @param {string} text - The string against which to match the regular expression
+   * @returns {number|undefined}
+   */
   shortestMatch(text: string): number | undefined;
-/**
-* Returns the same as `shortest_match`, but starts the search at the
-* given offset.
-*
-* The significance of the starting point is that it takes the surrounding
-* context into consideration. For example, the `\A` anchor can only match
-* when `start == 0`.
-* @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.shortest_match_at
-* @param {string} text - The string against which to match the regular expression
-* @param {number} start - Zero-based index at which to start matching
-* @returns {number|undefined}
-*/
+  /**
+   * Returns the same as `shortest_match`, but starts the search at the
+   * given offset.
+   *
+   * The significance of the starting point is that it takes the surrounding
+   * context into consideration. For example, the `\A` anchor can only match
+   * when `start == 0`.
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.shortest_match_at
+   * @param {string} text - The string against which to match the regular expression
+   * @param {number} start - Zero-based index at which to start matching
+   * @returns {number|undefined}
+   */
   shortestMatchAt(text: string, start: number): number | undefined;
-/**
-* Returns the regular expression into a high level intermediate
-* representation.
-* @returns {any}
-*/
+  /**
+   * Compiles a regular expression. Once compiled, it can be used repeatedly
+   * to search, split or replace text in a string.
+   *
+   * If an invalid expression is given, then an error is returned.
+   */
+  constructor(re: string);
+  /**
+   * Returns the start and end byte range of the leftmost-first match in
+   * `text`. If no match exists, then `undefined` is returned.
+   *
+   * Note that this should only be used if you want to discover the position
+   * of the match. Testing the existence of a match is faster if you use
+   * `isMatch`.
+   *
+   * # Example
+   *
+   * Find the start and end location of the first word with exactly 13
+   * Unicode word characters:
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const text = "I categorically deny having triskaidekaphobia."
+   * const m = new RRegex("\\b\\w{13}\\b").find(text)
+   * expect(m.start).toBe(2)
+   * expect(m.end).toBe(15)
+   * ```
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.find
+   * @param {string} text - The string against which to match the regular expression
+   * @return {Match}
+   */
+  find(text: string): Match | undefined;
+  /**
+   * Returns an iterator of substrings of `text` delimited by a match of the
+   * regular expression. Namely, each element of the iterator corresponds to
+   * text that *isn't* matched by the regular expression.
+   *
+   * This method will *not* copy the text given.
+   *
+   * # Example
+   *
+   * To split a string delimited by arbitrary amounts of spaces or tabs:
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const re = new RRegex(r"[ \\t]+")
+   * const fields = re.split("a b \t  c\td    e")
+   * expect(fields).toEqual(["a", "b", "c", "d", "e"])
+   * ```
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.split
+   * @param {string} text - The string against which to match the regular expression
+   * @returns {string[]}
+   */
+  split(text: string): string[];
+  /**
+   * Returns an iterator of at most `limit` substrings of `text` delimited
+   * by a match of the regular expression. (A `limit` of `0` will return no
+   * substrings.) Namely, each element of the iterator corresponds to text
+   * that *isn't* matched by the regular expression. The remainder of the
+   * string that is not split will be the last element in the iterator.
+   *
+   * This method will *not* copy the text given.
+   *
+   * # Example
+   *
+   * Get the first two words in some text:
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const re = new RRegex(r"\\W+")
+   * const fields = re.splitn("Hey! How are you?", 3)
+   * expect(fields).toEqual(["Hey", "How", "are you?"])
+   * ```
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.splitn
+   * @param {string} text - The string against which to match the regular expression
+   * @param {number} limit - Max number result elements
+   * @returns {string[]}
+   */
+  splitn(text: string, limit: number): string[];
+  /**
+   * Returns the regular expression into a high level intermediate
+   * representation.
+   */
   syntax(): Hir;
-/**
-* Returns a string representing the regular expression
-* @returns {string}
-*/
+  /**
+   * Returns the same as find, but starts the search at the given
+   * offset.
+   *
+   * The significance of the starting point is that it takes the surrounding
+   * context into consideration. For example, the `\A` anchor can only
+   * match when `start == 0`.
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.find_at
+   * @param {string} text - The string against which to match the regular expression
+   * @param {number} start - Zero-based index at which to start matching
+   * @returns {Match}
+   */
+  findAt(text: string, start: number): Match | undefined;
+  /**
+   * Replaces the leftmost-first match with the replacement provided.
+   * The replacement can be a regular string (where `$N` and `$name` are
+   * expanded to match capture groups) or a function that takes the matches'
+   * `Captures` and returns the replaced string.
+   *
+   * If no match is found, then a copy of the string is returned unchanged.
+   *
+   * # Replacement string syntax
+   *
+   * All instances of `$name` in the replacement text is replaced with the
+   * corresponding capture group `name`.
+   *
+   * `name` may be an integer corresponding to the index of the
+   * capture group (counted by order of opening parenthesis where `0` is the
+   * entire match) or it can be a name (consisting of letters, digits or
+   * underscores) corresponding to a named capture group.
+   *
+   * If `name` isn't a valid capture group (whether the name doesn't exist
+   * or isn't a valid index), then it is replaced with the empty string.
+   *
+   * The longest possible name is used. e.g., `$1a` looks up the capture
+   * group named `1a` and not the capture group at index `1`. To exert more
+   * precise control over the name, use braces, e.g., `${1}a`.
+   *
+   * To write a literal `$` use `$$`.
+   *
+   * # Examples
+   *
+   * Note that this function is polymorphic with respect to the replacement.
+   * In typical usage, this can just be a normal string:
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const re = new RRegex("[^01]+")
+   * expect(re.replace("1078910", "").toBe("1010")
+   * ```
+   *
+   * Here's the example using this expansion technique with named capture
+   * groups:
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const re = new RRegex("(?P<last>[^,\\s]+),\\s+(?P<first>\\S+)")
+   * const result = re.replace("Springsteen, Bruce", "$first $last")
+   * expect(result).toBe("Bruce Springsteen")
+   * ```
+   *
+   * Note that using `$2` instead of `$first` or `$1` instead of `$last`
+   * would produce the same result. To write a literal `$` use `$$`.
+   *
+   * Sometimes the replacement string requires use of curly braces to
+   * delineate a capture group replacement and surrounding literal text.
+   * For example, if we wanted to join two words together with an
+   * underscore:
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const re = new RRegex("(?P<first>\\w+)\\s+(?P<second>\\w+)")
+   * const result = re.replace("deep fried", "${first}_$second")
+   * expect(result).toBe("deep_fried")
+   * ```
+   *
+   * Without the curly braces, the capture group name `first_` would be
+   * used, and since it doesn't exist, it would be replaced with the empty
+   * string.
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.replace
+   * @param {string} text - The string against which to match the regular expression
+   * @param {string} rep - It's a string, it will replace the substring matched by `pattern`.
+   * @returns {string}
+   */
+  replace(text: string, rep: string): string;
+  /**
+   * Returns the capture groups corresponding to the leftmost-first
+   * match in `text`. Capture group `0` always corresponds to the entire
+   * match. If no match is found, then `undefined` is returned.
+   *
+   * You should only use `captures` if you need access to the location of
+   * capturing group matches. Otherwise, `find` is faster for discovering
+   * the location of the overall match.
+   *
+   * # Examples
+   *
+   * Say you have some text with movie names and their release years,
+   * like "'Citizen Kane' (1941)". It'd be nice if we could search for text
+   * looking like that, while also extracting the movie name and its release
+   * year separately.
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const re = new RRegex("'([^']+)'\\s+\\((\\d{4})\)")
+   * const text = "Not my favorite movie: 'Citizen Kane' (1941)."
+   * const caps = re.captures(text)
+   * expect(caps.get[1].value).toBe("Citizen Kane")
+   * expect(caps.get[2].value).toBe("1941")
+   * expect(caps.get[0].value).toBe("'Citizen Kane' (1941)")
+   * ```
+   *
+   * Note that the full match is at capture group `0`. Each subsequent
+   * capture group is indexed by the order of its opening `(`.
+   *
+   * We can make this example a bit clearer by using *named* capture groups:
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const re = new RRegex("'(?P<title>[^']+)'\\s+\\((?P<year>\\d{4})\)")
+   * const text = "Not my favorite movie: 'Citizen Kane' (1941)."
+   * const caps = re.captures(text)
+   * expect(caps.name["title"].value).toBe("Citizen Kane")
+   * expect(caps.name["year"].value).toBe("1941")
+   * expect(caps.get[0].value).toBe("'Citizen Kane' (1941)")
+   * ```
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.captures
+   * @param {string} text - The string against which to match the regular expression
+   * @returns {Captures|undefined}
+   */
+  captures(text: string): Captures | undefined;
+  /**
+   * Returns an array for each successive non-overlapping match in `text``,
+   * returning the start and end byte indices with respect to `text`.
+   *
+   * # Example
+   *
+   * Find the start and end location of every word with exactly 13 Unicode
+   * word characters:
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const text = "Retroactively relinquishing remunerations is reprehensible."
+   * const matches = new RRegex("\\b\\w{13}\\b").findAll(text)
+   * ```
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.find_iter
+   * @param {string} text - The string against which to match the regular expression
+   * @returns {Match}
+   */
+  findAll(text: string): Match[];
+  /**
+   * Returns true if and only if there is a match for the regex in the
+   * string given.
+   *
+   * It is recommended to use this method if all you need to do is test
+   * a match, since the underlying matching engine may be able to do less
+   * work.
+   *
+   * # Example
+   *
+   * Test if some text contains at least one word with exactly 13
+   * Unicode word characters:
+   *
+   * ```typescript
+   * import { RRegex } from "rregex"
+   *
+   * const text = "I categorically deny having triskaidekaphobia."
+   * expect(new RRegex("\\b\\w{13}\\b").is_match(text)).toBe(true)
+   * ```
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.is_match
+   * @param {string} text - The string against which to match the regular expression
+   * @return {boolean}
+   */
+  isMatch(text: string): boolean;
+  /**
+   * Replaces at most `limit` non-overlapping matches in `text` with the
+   * replacement provided. If `limit` is 0, then all non-overlapping matches
+   * are replaced.
+   *
+   * See the documentation for `replace` for details on how to access
+   * capturing group matches in the replacement string.
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.Regex.html#method.replacen
+   * @param {string} text - The string against which to match the regular expression
+   * @param {number} limit - Max number of replacement
+   * @param {string} rep - It's a string, it will replace the substring matched by `pattern`.
+   * @returns {string}
+   */
+  replacen(text: string, limit: number, rep: string): string;
+  /**
+   * Returns a string representing the regular expression
+   */
   toString(): string;
 }
 /**
-* Match multiple (possibly overlapping) regular expressions in a single scan.
-* A regex set corresponds to the union of two or more regular expressions.
-*
-* That is, a regex set will match text where at least one of its constituent
-* regular expressions matches. A regex set as its formulated here provides a
-* touch more power: it will also report which regular expressions in the set match.
-* Indeed, this is the key difference between regex sets and a single `Regex`
-* with many alternates, since only one alternate can match at a time.
-*
-* @see https://docs.rs/regex/latest/regex/struct.RegexSet.html#method.empty
-*/
+ * Match multiple (possibly overlapping) regular expressions in a single scan.
+ * A regex set corresponds to the union of two or more regular expressions.
+ *
+ * That is, a regex set will match text where at least one of its constituent
+ * regular expressions matches. A regex set as its formulated here provides a
+ * touch more power: it will also report which regular expressions in the set match.
+ * Indeed, this is the key difference between regex sets and a single `Regex`
+ * with many alternates, since only one alternate can match at a time.
+ *
+ * @see https://docs.rs/regex/latest/regex/struct.RegexSet.html#method.empty
+ */
 export class RRegexSet {
   free(): void;
-/**
-* Create a new regex set with the given regular expressions.
-*
-* This takes an of strings, if any item in the list is not a valid regular
-* expressions, then an error is returned.
-*
-* # Example
-*
-* Create a new regex set from an iterator of strings:
-*
-* ```typescript
-* import { RegexSet } from "rregex"
-*
-* const set = new RegexSet(["\\w+", "\\d+"])
-* expect(set.is_match("foo")).toBe(true)
-* ```
-* @param {Array<any>} list
-*/
+  /**
+   * Create a new regex set with the given regular expressions.
+   *
+   * This takes an of strings, if any item in the list is not a valid regular
+   * expressions, then an error is returned.
+   *
+   * # Example
+   *
+   * Create a new regex set from an iterator of strings:
+   *
+   * ```typescript
+   * import { RegexSet } from "rregex"
+   *
+   * const set = new RegexSet(["\\w+", "\\d+"])
+   * expect(set.is_match("foo")).toBe(true)
+   * ```
+   */
   constructor(list: Array<any>);
-/**
-* Returns true if and only if one of the regexes in this set matches
-* the text given.
-*
-* This method should be preferred if you only need to test whether any
-* of the regexes in the set should match, but don't care about *which*
-* regexes matched. This is because the underlying matching engine will
-* quit immediately after seeing the first match instead of continuing to
-* find all matches.
-*
-* Note that as with searches using `Regex`, the expression is unanchored
-* by default. That is, if the regex does not start with `^` or `\A`, or
-* end with `$` or `\z`, then it is permitted to match anywhere in the
-* text.
-*
-* # Example
-*
-* Tests whether a set matches some text:
-*
-* ```typescript
-* import { RegexSet } from "rregex"
-*
-* const set = new RegexSet(["\\w+", "\\d+"])
-* expect(set.is_match("foo")).toBe(true)
-* expect(!set.is_match("☃")).toBe(false)
-* ```
-*
-* @see https://docs.rs/regex/latest/regex/struct.RegexSet.html#method.is_match
-* @param {string} text - The string against which to match the regular expression
-* @return {boolean}
-*/
-  isMatch(text: string): boolean;
-/**
-* Returns the set of regular expressions that match in the given text.
-*
-* The set returned contains the index of each regular expression that
-* matches in the given text. The index is in correspondence with the
-* order of regular expressions given to `RegexSet`'s constructor.
-*
-* The set can also be used to iterate over the matched indices.
-*
-* Note that as with searches using `Regex`, the expression is unanchored
-* by default. That is, if the regex does not start with `^` or `\A`, or
-* end with `$` or `\z`, then it is permitted to match anywhere in the
-* text.
-*
-* # Example
-*
-* Tests which regular expressions match the given text:
-*
-* ```typescript
-* import { RegexSet } from "rregex"
-*
-* const set = new RegexSet([
-*     "\\w+",
-*     "\\d+",
-*     "\\pL+",
-*     "foo",
-*     "bar",
-*     "barfoo",
-*     "foobar",
-* ])
-* const matches = set.matches("foobar")
-* expect(matches).toBe([0, 2, 3, 4, 6])
-* ```
-*
-* @see https://docs.rs/regex/latest/regex/struct.RegexSet.html#method.matches
-* @param {string} text - The string against which to match the regular expression
-* @return {number[]}
-*/
+  /**
+   * Returns the set of regular expressions that match in the given text.
+   *
+   * The set returned contains the index of each regular expression that
+   * matches in the given text. The index is in correspondence with the
+   * order of regular expressions given to `RegexSet`'s constructor.
+   *
+   * The set can also be used to iterate over the matched indices.
+   *
+   * Note that as with searches using `Regex`, the expression is unanchored
+   * by default. That is, if the regex does not start with `^` or `\A`, or
+   * end with `$` or `\z`, then it is permitted to match anywhere in the
+   * text.
+   *
+   * # Example
+   *
+   * Tests which regular expressions match the given text:
+   *
+   * ```typescript
+   * import { RegexSet } from "rregex"
+   *
+   * const set = new RegexSet([
+   *     "\\w+",
+   *     "\\d+",
+   *     "\\pL+",
+   *     "foo",
+   *     "bar",
+   *     "barfoo",
+   *     "foobar",
+   * ])
+   * const matches = set.matches("foobar")
+   * expect(matches).toBe([0, 2, 3, 4, 6])
+   * ```
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.RegexSet.html#method.matches
+   * @param {string} text - The string against which to match the regular expression
+   * @return {number[]}
+   */
   matches(text: string): number[];
+  /**
+   * Returns true if and only if one of the regexes in this set matches
+   * the text given.
+   *
+   * This method should be preferred if you only need to test whether any
+   * of the regexes in the set should match, but don't care about *which*
+   * regexes matched. This is because the underlying matching engine will
+   * quit immediately after seeing the first match instead of continuing to
+   * find all matches.
+   *
+   * Note that as with searches using `Regex`, the expression is unanchored
+   * by default. That is, if the regex does not start with `^` or `\A`, or
+   * end with `$` or `\z`, then it is permitted to match anywhere in the
+   * text.
+   *
+   * # Example
+   *
+   * Tests whether a set matches some text:
+   *
+   * ```typescript
+   * import { RegexSet } from "rregex"
+   *
+   * const set = new RegexSet(["\\w+", "\\d+"])
+   * expect(set.is_match("foo")).toBe(true)
+   * expect(!set.is_match("☃")).toBe(false)
+   * ```
+   *
+   * @see https://docs.rs/regex/latest/regex/struct.RegexSet.html#method.is_match
+   * @param {string} text - The string against which to match the regular expression
+   * @return {boolean}
+   */
+  isMatch(text: string): boolean;
 }
 
 export type InitInput = RequestInfo | URL | Response | BufferSource | WebAssembly.Module;
 
 export interface InitOutput {
   readonly memory: WebAssembly.Memory;
-  readonly __wbg_rregex_free: (a: number) => void;
-  readonly rregex_new: (a: number, b: number, c: number) => void;
+  readonly __wbg_rregex_free: (a: number, b: number) => void;
+  readonly rregex_captureNames: (a: number) => [number, number];
+  readonly rregex_captures: (a: number, b: number, c: number) => [number, number, number];
+  readonly rregex_capturesAll: (a: number, b: number, c: number) => [number, number, number];
+  readonly rregex_capturesLength: (a: number) => number;
+  readonly rregex_find: (a: number, b: number, c: number) => [number, number, number];
+  readonly rregex_findAll: (a: number, b: number, c: number) => [number, number, number];
+  readonly rregex_findAt: (a: number, b: number, c: number, d: number) => [number, number, number];
   readonly rregex_isMatch: (a: number, b: number, c: number) => number;
   readonly rregex_isMatchAt: (a: number, b: number, c: number, d: number) => number;
-  readonly rregex_find: (a: number, b: number, c: number, d: number) => void;
-  readonly rregex_findAt: (a: number, b: number, c: number, d: number, e: number) => void;
-  readonly rregex_findAll: (a: number, b: number, c: number, d: number) => void;
-  readonly rregex_captureNames: (a: number, b: number) => void;
-  readonly rregex_captures: (a: number, b: number, c: number, d: number) => void;
-  readonly rregex_capturesAll: (a: number, b: number, c: number, d: number) => void;
-  readonly rregex_capturesLength: (a: number) => number;
-  readonly rregex_replace: (a: number, b: number, c: number, d: number, e: number, f: number) => void;
-  readonly rregex_replacen: (a: number, b: number, c: number, d: number, e: number, f: number, g: number) => void;
-  readonly rregex_replaceAll: (a: number, b: number, c: number, d: number, e: number, f: number) => void;
-  readonly rregex_split: (a: number, b: number, c: number, d: number) => void;
-  readonly rregex_splitn: (a: number, b: number, c: number, d: number, e: number) => void;
-  readonly rregex_shortestMatch: (a: number, b: number, c: number, d: number) => void;
-  readonly rregex_shortestMatchAt: (a: number, b: number, c: number, d: number, e: number) => void;
-  readonly rregex_syntax: (a: number, b: number) => void;
-  readonly rregex_toString: (a: number, b: number) => void;
-  readonly __wbg_rregexset_free: (a: number) => void;
-  readonly rregexset_new: (a: number, b: number) => void;
+  readonly rregex_new: (a: number, b: number) => [number, number, number];
+  readonly rregex_replace: (a: number, b: number, c: number, d: number, e: number) => [number, number];
+  readonly rregex_replaceAll: (a: number, b: number, c: number, d: number, e: number) => [number, number];
+  readonly rregex_replacen: (a: number, b: number, c: number, d: number, e: number, f: number) => [number, number];
+  readonly rregex_shortestMatch: (a: number, b: number, c: number) => number;
+  readonly rregex_shortestMatchAt: (a: number, b: number, c: number, d: number) => number;
+  readonly rregex_split: (a: number, b: number, c: number) => [number, number];
+  readonly rregex_splitn: (a: number, b: number, c: number, d: number) => [number, number];
+  readonly rregex_syntax: (a: number) => [number, number, number];
+  readonly rregex_toString: (a: number) => [number, number];
+  readonly __wbg_rregexset_free: (a: number, b: number) => void;
   readonly rregexset_isMatch: (a: number, b: number, c: number) => number;
-  readonly rregexset_matches: (a: number, b: number, c: number, d: number) => void;
-  readonly escape: (a: number, b: number, c: number) => void;
+  readonly rregexset_matches: (a: number, b: number, c: number) => [number, number];
+  readonly rregexset_new: (a: any) => [number, number, number];
+  readonly escape: (a: number, b: number) => [number, number];
+  readonly __wbindgen_exn_store: (a: number) => void;
+  readonly __externref_table_alloc: () => number;
+  readonly __wbindgen_export_2: WebAssembly.Table;
   readonly __wbindgen_malloc: (a: number, b: number) => number;
   readonly __wbindgen_realloc: (a: number, b: number, c: number, d: number) => number;
-  readonly __wbindgen_add_to_stack_pointer: (a: number) => number;
   readonly __wbindgen_free: (a: number, b: number, c: number) => void;
-  readonly __wbindgen_exn_store: (a: number) => void;
+  readonly __externref_table_dealloc: (a: number) => void;
+  readonly __externref_drop_slice: (a: number, b: number) => void;
+  readonly __wbindgen_start: () => void;
 }
 
 export type SyncInitInput = BufferSource | WebAssembly.Module;
@@ -1291,21 +1288,21 @@ export type SyncInitInput = BufferSource | WebAssembly.Module;
 * Instantiates the given `module`, which can either be bytes or
 * a precompiled `WebAssembly.Module`.
 *
-* @param {SyncInitInput} module
+* @param {{ module: SyncInitInput }} module - Passing `SyncInitInput` directly is deprecated.
 *
 * @returns {InitOutput}
 */
-export function initSync(module: SyncInitInput): InitOutput;
+export function initSync(module: { module: SyncInitInput } | SyncInitInput): InitOutput;
 
 /**
 * If `module_or_path` is {RequestInfo} or {URL}, makes a request and
 * for everything else, calls `WebAssembly.instantiate` directly.
 *
-* @param {InitInput | Promise<InitInput>} module_or_path
+* @param {{ module_or_path: InitInput | Promise<InitInput> }} module_or_path - Passing `InitInput` directly is deprecated.
 *
 * @returns {Promise<InitOutput>}
 */
-export default function __wbg_init (module_or_path?: InitInput | Promise<InitInput>): Promise<InitOutput>;
+export default function __wbg_init (module_or_path?: { module_or_path: InitInput | Promise<InitInput> } | InitInput | Promise<InitInput>): Promise<InitOutput>;
 
 /** Build metadata */
 export const metadata: {
@@ -1316,6 +1313,6 @@ export const metadata: {
   ],
   "homepage": "http://rregex.dev",
   "repository": "https://github.com/2fd/rregex",
-  "regex": "1.10.5",
+  "regex": "1.10.6",
   "regex-syntax": "0.8.4"
 }