rig-review 4.3.0 → 4.5.0
This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
- package/package.json +1 -1
- package/src/job-front.ts +15 -7
- package/src/job-session.ts +24 -9
- package/src/job-source.ts +21 -5
- package/src/job-store.ts +13 -0
- package/src/manifest.ts +11 -3
- package/src/open-workspace-state.ts +12 -3
- package/src/open.ts +2 -1
- package/src/parts-view.ts +3 -4
- package/src/reference.ts +3 -3
- package/web/catalog-en.ts +6 -1
- package/web/catalog-ko.ts +1116 -1111
- package/web/compare.ts +1 -1
- package/web/interview-panel.ts +17 -3
- package/web/job-rig-screen.ts +56 -13
- package/web/job-session.ts +20 -7
- package/web/main.ts +56 -17
- package/web/parts-viewport-provider.ts +9 -3
- package/web/rig-host.ts +3 -0
- package/web/scene-plates.ts +31 -0
- package/web/stage-comments.ts +8 -6
- package/web/styles.css +6 -4
- package/web/view-controls.ts +15 -9
- package/web/viewport-controller.ts +2 -2
package/web/catalog-ko.ts
CHANGED
|
@@ -12,13 +12,13 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
12
12
|
"Saved draft could not be restored. Your draft has not been deleted. Download or discard it before submitting.": "저장해 둔 초안을 불러오지 못했어요. 초안은 지워지지 않았어요. 내려받거나 버린 뒤에 제출해 주세요.",
|
|
13
13
|
"Saved draft downloaded \u00b7 not submitted": "저장해 둔 초안을 내려받았어요 · 아직 제출하지 않았어요",
|
|
14
14
|
"JOB_DIRECTION_MISSING": "JOB_DIRECTION_MISSING",
|
|
15
|
-
"job.refusal.JOB_DIRECTION_MISSING": "이 게시물에는 디렉션이
|
|
15
|
+
"job.refusal.JOB_DIRECTION_MISSING": "이 게시물에는 디렉션이 없어요. 제작 도구에서 모델과 함께 디렉션 데이터를 게시해야 해요.",
|
|
16
16
|
"JOB_PARTS_MISSING": "JOB_PARTS_MISSING",
|
|
17
|
-
"job.refusal.JOB_PARTS_MISSING": "이 초안에는 파츠가
|
|
17
|
+
"job.refusal.JOB_PARTS_MISSING": "이 초안에는 파츠가 없어요. 제작 도구에서 초안 파츠를 게시한 후 파츠 검토를 요청해야 해요.",
|
|
18
18
|
"JOB_MODEL_MISSING": "JOB_MODEL_MISSING",
|
|
19
|
-
"job.refusal.JOB_MODEL_MISSING": "이 요청에는 컴파일된 모델이
|
|
19
|
+
"job.refusal.JOB_MODEL_MISSING": "이 요청에는 컴파일된 모델이 없어요. 제작 도구에서 컴파일된 모델을 게시한 후 리그 판정을 요청해야 해요.",
|
|
20
20
|
"JOB_ASK_UNSUPPORTED": "JOB_ASK_UNSUPPORTED",
|
|
21
|
-
"job.refusal.JOB_ASK_UNSUPPORTED": "이 요청에 맞는 소스 또는 체크포인트 연결 정보가
|
|
21
|
+
"job.refusal.JOB_ASK_UNSUPPORTED": "이 요청에 맞는 소스 또는 체크포인트 연결 정보가 없어요. 제작 도구에서 해당 소스와 계획 연결 정보를 게시한 후 다시 요청해야 해요.",
|
|
22
22
|
"Comment · C": "코멘트 · C",
|
|
23
23
|
|
|
24
24
|
"project.json": "project.json",
|
|
@@ -38,26 +38,26 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
38
38
|
'More tabs': '탭 더 보기',
|
|
39
39
|
'Inspection': '검사',
|
|
40
40
|
'View switch': '뷰 전환',
|
|
41
|
-
'One CSS pixel per current pane coordinate unit; synchronized panes retain relative zoom.': '현재 뷰 좌표 단위당 CSS 픽셀
|
|
42
|
-
'1:1 · one CSS pixel per model coordinate unit.': '1:1 · 모델 좌표 단위당 CSS 픽셀
|
|
43
|
-
'1:1 · one CSS pixel per reference grid unit.': '1:1 · 참조 격자 단위당 CSS 픽셀
|
|
41
|
+
'One CSS pixel per current pane coordinate unit; synchronized panes retain relative zoom.': '현재 뷰 좌표 단위당 CSS 픽셀 하나예요. 동기화된 뷰는 상대 배율을 유지해요.',
|
|
42
|
+
'1:1 · one CSS pixel per model coordinate unit.': '1:1 · 모델 좌표 단위당 CSS 픽셀 하나예요.',
|
|
43
|
+
'1:1 · one CSS pixel per reference grid unit.': '1:1 · 참조 격자 단위당 CSS 픽셀 하나예요.',
|
|
44
44
|
|
|
45
45
|
'Collapse bottom panel': '하단 패널 접기',
|
|
46
46
|
'Expand bottom panel': '하단 패널 펼치기',
|
|
47
|
-
"No mesh geometry is available for this draft.": "이 드래프트에는 표시할 메시 형상이
|
|
48
|
-
"PARTS_COMMENT_PART_MISMATCH: comment belongs to another part": "PARTS_COMMENT_PART_MISMATCH: 코멘트가 다른 파츠에
|
|
47
|
+
"No mesh geometry is available for this draft.": "이 드래프트에는 표시할 메시 형상이 없어요.",
|
|
48
|
+
"PARTS_COMMENT_PART_MISMATCH: comment belongs to another part": "PARTS_COMMENT_PART_MISMATCH: 코멘트가 다른 파츠에 속해요.",
|
|
49
49
|
"Issue parts": "이슈 파츠",
|
|
50
50
|
"Select at least one part.": "파츠를 하나 이상 선택하세요.",
|
|
51
51
|
"Mesh (none 0/{0})": "메시 (없음 0/{0})",
|
|
52
|
-
"No mesh geometry is available for this part.": "이 파츠에는 표시할 메시 형상이
|
|
52
|
+
"No mesh geometry is available for this part.": "이 파츠에는 표시할 메시 형상이 없어요.",
|
|
53
53
|
"PARTS_MESH_GENERATED": "PARTS_MESH_GENERATED",
|
|
54
|
-
"PARTS_MESH_GENERATED: No mesh geometry is available for this part.": "PARTS_MESH_GENERATED: 이 파츠에는 표시할 메시 형상이
|
|
55
|
-
"JOB_STILL_CAPTURE_FAILED": "JOB_STILL_CAPTURE_FAILED · 표시된 리그 프레임을 캡처하지
|
|
56
|
-
"JOB_STILL_BINDING_MISMATCH": "JOB_STILL_BINDING_MISMATCH · 표시된 소스·페이지·그려진 프레임이
|
|
57
|
-
"JOB_REVIEW_READ_ONLY": "JOB_REVIEW_READ_ONLY · 이 작업 대상은 여기서 읽기
|
|
54
|
+
"PARTS_MESH_GENERATED: No mesh geometry is available for this part.": "PARTS_MESH_GENERATED: 이 파츠에는 표시할 메시 형상이 없어요.",
|
|
55
|
+
"JOB_STILL_CAPTURE_FAILED": "JOB_STILL_CAPTURE_FAILED · 표시된 리그 프레임을 캡처하지 못했어요. 정상적으로 그려진 뒤 다시 시도하세요.",
|
|
56
|
+
"JOB_STILL_BINDING_MISMATCH": "JOB_STILL_BINDING_MISMATCH · 표시된 소스·페이지·그려진 프레임이 바뀌었어요. 새 판정 시도를 시작하세요.",
|
|
57
|
+
"JOB_REVIEW_READ_ONLY": "JOB_REVIEW_READ_ONLY · 이 작업 대상은 여기서 읽기 전용이에요. 프로듀서 도구와 다시 빌드는 사용할 수 없어요.",
|
|
58
58
|
"JOB_ACT_NOTHING_TO_SUBMIT": "JOB_ACT_NOTHING_TO_SUBMIT · 제출하기 전에 승인, 변경 요청 또는 체크포인트 결과를 고르세요.",
|
|
59
|
-
"JOB_STILL_UNAVAILABLE": "JOB_STILL_UNAVAILABLE · 이 과거 기록 또는 리그 외 판정에는 보관된 리그 PNG가
|
|
60
|
-
"JOB_STILL_OUTPUT_FAILED": "JOB_STILL_OUTPUT_FAILED · 소비자가 리그 PNG 또는 판정 출력을 끝까지 기록하지
|
|
59
|
+
"JOB_STILL_UNAVAILABLE": "JOB_STILL_UNAVAILABLE · 이 과거 기록 또는 리그 외 판정에는 보관된 리그 PNG가 없어요.",
|
|
60
|
+
"JOB_STILL_OUTPUT_FAILED": "JOB_STILL_OUTPUT_FAILED · 소비자가 리그 PNG 또는 판정 출력을 끝까지 기록하지 못했어요.",
|
|
61
61
|
"WORKSPACE_BODY_TIMEOUT": "WORKSPACE_BODY_TIMEOUT",
|
|
62
62
|
"rig-review-target/1": "rig-review-target/1",
|
|
63
63
|
"Review workspace": "검토 작업 공간",
|
|
@@ -101,12 +101,12 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
101
101
|
"Producer check unavailable": "프로듀서 검사 결과 없음",
|
|
102
102
|
"Check failed": "검사 실패",
|
|
103
103
|
"Check unavailable": "검사 결과 없음",
|
|
104
|
-
"RIG_VERSION_UNAVAILABLE: this draft has no recorded rig review package.": "RIG_VERSION_UNAVAILABLE: 이 초안에는 기록된 리그 검토 패키지가
|
|
105
|
-
"DIRECTION_VERSION_UNAVAILABLE: this draft has no recorded rig review package.": "DIRECTION_VERSION_UNAVAILABLE: 이 초안에는 기록된 리그 검토 패키지가
|
|
106
|
-
"PARTS_VERDICT_READ_ONLY: a pending parts review and an explicit verdict output directory are required.": "PARTS_VERDICT_READ_ONLY: 대기 중인 파츠 검토와 명시적으로 지정한 판정 출력 디렉터리가
|
|
104
|
+
"RIG_VERSION_UNAVAILABLE: this draft has no recorded rig review package.": "RIG_VERSION_UNAVAILABLE: 이 초안에는 기록된 리그 검토 패키지가 없어요.",
|
|
105
|
+
"DIRECTION_VERSION_UNAVAILABLE: this draft has no recorded rig review package.": "DIRECTION_VERSION_UNAVAILABLE: 이 초안에는 기록된 리그 검토 패키지가 없어요.",
|
|
106
|
+
"PARTS_VERDICT_READ_ONLY: a pending parts review and an explicit verdict output directory are required.": "PARTS_VERDICT_READ_ONLY: 대기 중인 파츠 검토와 명시적으로 지정한 판정 출력 디렉터리가 필요해요.",
|
|
107
107
|
"INTERVIEW_OPTIONS_STALE": "INTERVIEW_OPTIONS_STALE: 프로젝트 또는 원본이 바뀌었어요. 검토를 다시 여세요.",
|
|
108
|
-
"INTERVIEW_CONTEXT_KIND_UNSUPPORTED": "INTERVIEW_CONTEXT_KIND_UNSUPPORTED: 지원하지 않는 선택지 문맥
|
|
109
|
-
"INTERVIEW_OPTIONS_SCENE_LEGACY": "INTERVIEW_OPTIONS_SCENE_LEGACY: 이전 규칙의 장면 문맥을
|
|
108
|
+
"INTERVIEW_CONTEXT_KIND_UNSUPPORTED": "INTERVIEW_CONTEXT_KIND_UNSUPPORTED: 지원하지 않는 선택지 문맥 유형이에요.",
|
|
109
|
+
"INTERVIEW_OPTIONS_SCENE_LEGACY": "INTERVIEW_OPTIONS_SCENE_LEGACY: 이전 규칙의 장면 문맥을 읽었어요. 새 작업 전에 현재 문맥으로 선택지를 다시 준비하세요.",
|
|
110
110
|
"interview.historicalIssue": "INTERVIEW_OPTIONS_STALE: 이 과거 기록의 문맥을 검증할 수 없어요.",
|
|
111
111
|
"interview.joinedDraft": "초안 {0} · 프로젝트 {1} · 원본 {2}",
|
|
112
112
|
"interview.joined": "Create 버전 {0} · 프로젝트 SHA-256 {1} · 검토 SHA-256 {2}",
|
|
@@ -124,8 +124,8 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
124
124
|
"interview.file": "보관된 선택지 파일을 읽을 수 없어요.",
|
|
125
125
|
"interview.stale": "프로젝트, 검토 패키지 또는 선택지의 근거가 바뀌었어요. 인터뷰를 다시 여세요.",
|
|
126
126
|
"interview.output": "선택 기록 출력 경로를 쓸 수 없거나 입력과 충돌해요.",
|
|
127
|
-
"interview.failed": "인터뷰 요청에
|
|
128
|
-
"interview.empty": "이 프로젝트에 보관된 선택지 세트가
|
|
127
|
+
"interview.failed": "인터뷰 요청에 실패했어요.",
|
|
128
|
+
"interview.empty": "이 프로젝트에 보관된 선택지 세트가 없어요.",
|
|
129
129
|
"interview.question": "인터뷰 질문",
|
|
130
130
|
"interview.history": "이전 답변",
|
|
131
131
|
"interview.parts": "바인딩된 파츠",
|
|
@@ -139,31 +139,33 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
139
139
|
"job.plan.produces": "산출물",
|
|
140
140
|
"job.plan.bar": "기준",
|
|
141
141
|
"job.plan.rests_on": "근거 답변",
|
|
142
|
-
"job.plan.noText": "설명을 읽을 수
|
|
143
|
-
"job.plan.field.absent": "이 기록에 제공되지
|
|
144
|
-
"job.plan.field.invalid": "제공된 필드의 형식을 지원하지
|
|
145
|
-
"job.plan.field.limit": "제공된 필드가 표시 한도를
|
|
146
|
-
"PLAN_TEXT_RECORD_UNAVAILABLE": "보존된 프로젝트 기록을 읽을 수
|
|
147
|
-
"PLAN_TEXT_RECORD_UNSUPPORTED": "이 보존 기록의 프로젝트 설명 형식을 지원하지
|
|
148
|
-
"PLAN_TEXT_STEPS_ABSENT": "기록에 계획 단계가 제공되지
|
|
149
|
-
"PLAN_TEXT_STEPS_INVALID": "기록의 계획 단계 목록 형식을 지원하지
|
|
150
|
-
"PLAN_TEXT_MAPPING_UNAVAILABLE": "기록의 단계를 표시된 계획과 연결할 수
|
|
151
|
-
"PLAN_TEXT_LIMIT": "계획 설명이 표시 전달 한도를
|
|
152
|
-
"PLAN_TEXT_METADATA_INVALID": "계획 설명 메타데이터가 올바르지
|
|
153
|
-
"PLAN_TEXT_SOURCE_MISMATCH": "계획 설명이 표시된 원본과 일치하지
|
|
154
|
-
"PLAN_TEXT_RECORD_MISMATCH": "보존된 계획 기록의 연결이 표시된 원본과
|
|
155
|
-
"PLAN_TEXT_RECORD_HASH_MISMATCH": "보존된 계획 기록의 바이트가 봉인 해시와
|
|
142
|
+
"job.plan.noText": "설명을 읽을 수 없어요.",
|
|
143
|
+
"job.plan.field.absent": "이 기록에 제공되지 않았어요.",
|
|
144
|
+
"job.plan.field.invalid": "제공된 필드의 형식을 지원하지 않아요.",
|
|
145
|
+
"job.plan.field.limit": "제공된 필드가 표시 한도를 초과해요.",
|
|
146
|
+
"PLAN_TEXT_RECORD_UNAVAILABLE": "보존된 프로젝트 기록을 읽을 수 없어요.",
|
|
147
|
+
"PLAN_TEXT_RECORD_UNSUPPORTED": "이 보존 기록의 프로젝트 설명 형식을 지원하지 않아요.",
|
|
148
|
+
"PLAN_TEXT_STEPS_ABSENT": "기록에 계획 단계가 제공되지 않았어요.",
|
|
149
|
+
"PLAN_TEXT_STEPS_INVALID": "기록의 계획 단계 목록 형식을 지원하지 않아요.",
|
|
150
|
+
"PLAN_TEXT_MAPPING_UNAVAILABLE": "기록의 단계를 표시된 계획과 연결할 수 없어요.",
|
|
151
|
+
"PLAN_TEXT_LIMIT": "계획 설명이 표시 전달 한도를 초과해요.",
|
|
152
|
+
"PLAN_TEXT_METADATA_INVALID": "계획 설명 메타데이터가 올바르지 않아요.",
|
|
153
|
+
"PLAN_TEXT_SOURCE_MISMATCH": "계획 설명이 표시된 원본과 일치하지 않아요.",
|
|
154
|
+
"PLAN_TEXT_RECORD_MISMATCH": "보존된 계획 기록의 연결이 표시된 원본과 달라요.",
|
|
155
|
+
"PLAN_TEXT_RECORD_HASH_MISMATCH": "보존된 계획 기록의 바이트가 봉인 해시와 달라요.",
|
|
156
156
|
"interview.recommended": "AI 추천",
|
|
157
157
|
"interview.note": "메모 (선택 사항)",
|
|
158
158
|
"interview.save": "선택 기록 저장",
|
|
159
|
-
"interview.unsaved": "저장하지 않은 변경 사항이
|
|
159
|
+
"interview.unsaved": "저장하지 않은 변경 사항이 있어요.",
|
|
160
160
|
"interview.saved": "선택 기록을 저장했어요.",
|
|
161
161
|
"interview.choose": "각 질문에서 하나씩 직접 선택한 뒤 저장하세요.",
|
|
162
|
-
"interview.readOnly": "읽기
|
|
162
|
+
"interview.readOnly": "읽기 전용이에요. 선택 기록을 저장하려면 실행 시 표시된 URL을 여세요.",
|
|
163
163
|
"interview.answered": "답변 {0} / {1}",
|
|
164
164
|
"interview.delegate": "위임",
|
|
165
165
|
"interview.open": "인터뷰 열기",
|
|
166
166
|
"interview.close": "인터뷰 닫기",
|
|
167
|
+
"interview.noteLabel": "의견 (선택)",
|
|
168
|
+
"interview.notePlaceholder": "선택지로 다 말하지 못한 점을 적어 주세요",
|
|
167
169
|
"PARTS_DIFFERENCE_PROVENANCE: declared path, lowercase SHA-256 and lanczos3-rgb-opaque required": "PARTS_DIFFERENCE_PROVENANCE: 선언된 경로, 소문자 SHA-256, lanczos3-rgb-opaque가 필요해요.",
|
|
168
170
|
"PARTS_DIFFERENCE_PATH: literal portable inside-package path required": "PARTS_DIFFERENCE_PATH: 패키지 안의 이식 가능한 리터럴 경로가 필요해요.",
|
|
169
171
|
"PARTS_DIFFERENCE_PATH: declared painting must be readable inside the package": "PARTS_DIFFERENCE_PATH: 선언된 원화를 패키지 안에서 읽을 수 있어야 해요.",
|
|
@@ -175,6 +177,9 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
175
177
|
"PARTS_DIFFERENCE_UNAVAILABLE: declared painting_in_rig required; legacy records remain readable": "PARTS_DIFFERENCE_UNAVAILABLE: 차이 비교에는 선언된 painting_in_rig가 필요해요. 이전 기록은 계속 열 수 있어요.",
|
|
176
178
|
"PARTS_DIFFERENCE_UNAVAILABLE: known original part required": "PARTS_DIFFERENCE_UNAVAILABLE: 패키지에 등록된 원본 파트가 필요해요.",
|
|
177
179
|
"PARTS_DIFFERENCE_PNG: exact RGBA8 operands required": "PARTS_DIFFERENCE_PNG: 비교에 쓰는 이미지는 RGBA8이어야 해요.",
|
|
180
|
+
"PARTS_DIFFERENCE_PNG: decodable PNG operands required": "PARTS_DIFFERENCE_PNG: 비교에 쓰는 PNG 이미지를 읽을 수 있어야 해요.",
|
|
181
|
+
"PARTS_DIFFERENCE_PNG": "PARTS_DIFFERENCE_PNG",
|
|
182
|
+
"PARTS_DIFFERENCE_UNAVAILABLE": "PARTS_DIFFERENCE_UNAVAILABLE",
|
|
178
183
|
"PARTS_DIFFERENCE_ALIGNMENT: integer native placement and exact PNG dimensions required": "PARTS_DIFFERENCE_ALIGNMENT: 원본 배치 좌표가 정수이고 PNG 크기가 선언된 크기와 정확히 같아야 해요.",
|
|
179
184
|
"PARTS_DIFFERENCE_ALIGNMENT: nontransparent part pixel lies outside declared rig grid": "PARTS_DIFFERENCE_ALIGNMENT: 파트의 알파가 0보다 큰 픽셀이 선언된 리그 격자 밖에 있어요.",
|
|
180
185
|
"PARTS_COMPARISON_INVALID: part/overlay with opacity 0..1, or difference with integer threshold 0..255 required": "PARTS_COMPARISON_INVALID: 파트 또는 오버레이의 불투명도는 0~1이어야 하고, 차이 비교의 임계값은 0~255 사이 정수여야 해요.",
|
|
@@ -195,7 +200,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
195
200
|
"Mesh parameters": "메시 매개변수",
|
|
196
201
|
"Use Write review, choose Parts review and name the Create draft. Export the saved item with the feedback CLI. Mesh deltas retain evidence as unsupported operations.": "리뷰 작성에서 파츠 검토를 선택하고 Create 초안 ID를 입력하세요. 저장한 항목은 feedback CLI로 내보낼 수 있어요. 메시 델타는 지원하지 않는 작업으로 원본 근거를 보존해요.",
|
|
197
202
|
"REBUILD_PART_NOT_CONTOUR: {0}": "REBUILD_PART_NOT_CONTOUR: {0} (컨투어 메시가 아님)",
|
|
198
|
-
"STAGE_DRAFT_NO_MESH: this part has no mesh attachment; direct correction is unavailable.": "STAGE_DRAFT_NO_MESH: 이 파츠에는 메시 부착물이 없어 직접 수정할 수
|
|
203
|
+
"STAGE_DRAFT_NO_MESH: this part has no mesh attachment; direct correction is unavailable.": "STAGE_DRAFT_NO_MESH: 이 파츠에는 메시 부착물이 없어 직접 수정할 수 없어요.",
|
|
199
204
|
"STAGE_DRAFT_UNAVAILABLE: no producer-compatible draft is supplied.": "STAGE_DRAFT_UNAVAILABLE: 제작기와 호환되는 초안이 제공되지 않았어요.",
|
|
200
205
|
"STAGE_DRAFT_MISMATCH: separated parts and draft mesh identity differ.": "STAGE_DRAFT_MISMATCH: 분리 파츠와 초안 메시의 식별 정보가 달라요.",
|
|
201
206
|
"STAGE_DRAFT_STALE: the requested revision is pending or no longer applied.": "STAGE_DRAFT_STALE: 요청한 리비전이 대기 중이거나 더 이상 적용 상태가 아니에요.",
|
|
@@ -209,23 +214,23 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
209
214
|
"3 Rig + animation": "3 리그 + 애니메이션",
|
|
210
215
|
"4 Direction": "4 연출",
|
|
211
216
|
"Inspection stages": "검사 단계",
|
|
212
|
-
"DIRECTION_NOT_AVAILABLE: Direction is not built yet.": "DIRECTION_NOT_AVAILABLE: 연출은 아직 만들어지지
|
|
213
|
-
"INTERVIEW_MODAL_UNAVAILABLE: the interview over this screen is not built yet.": "INTERVIEW_MODAL_UNAVAILABLE: 이 화면 위의 인터뷰는 아직 만들어지지
|
|
217
|
+
"DIRECTION_NOT_AVAILABLE: Direction is not built yet.": "DIRECTION_NOT_AVAILABLE: 연출은 아직 만들어지지 않았어요.",
|
|
218
|
+
"INTERVIEW_MODAL_UNAVAILABLE: the interview over this screen is not built yet.": "INTERVIEW_MODAL_UNAVAILABLE: 이 화면 위의 인터뷰는 아직 만들어지지 않았어요.",
|
|
214
219
|
"{stage} · not available": "{stage} · 사용 불가",
|
|
215
220
|
"INTERVIEW_UNAVAILABLE: No interview is attached to this inspection.": "INTERVIEW_UNAVAILABLE: 이 검토에 연결된 인터뷰가 없어요.",
|
|
216
|
-
"DIRECTION_SOURCE_CHANGED: undeclared playback input": "DIRECTION_SOURCE_CHANGED: 선언되지 않은 재생
|
|
217
|
-
"DIRECTION_SOURCE_CHANGED: playback bytes differ from the bound SHA-256": "DIRECTION_SOURCE_CHANGED: 재생 입력의 SHA-256이 기록된 값과
|
|
221
|
+
"DIRECTION_SOURCE_CHANGED: undeclared playback input": "DIRECTION_SOURCE_CHANGED: 선언되지 않은 재생 입력이에요.",
|
|
222
|
+
"DIRECTION_SOURCE_CHANGED: playback bytes differ from the bound SHA-256": "DIRECTION_SOURCE_CHANGED: 재생 입력의 SHA-256이 기록된 값과 달라요.",
|
|
218
223
|
"Take · {0} s": "테이크 · {0}초",
|
|
219
224
|
"direction.title": "연출 검사",
|
|
220
225
|
'direction.planes': '합성 레이어: {0}',
|
|
221
226
|
'direction.threePlanes': '배경 → 인물 → 전경',
|
|
222
227
|
'direction.twoPlanes': '배경 → 인물',
|
|
223
|
-
'direction.noScene': '인물만 표시: 이 게시본에는 장면이 선언되지
|
|
224
|
-
'direction.legacyTake': '인물만 표시: direction@1에는 장면 합성이
|
|
228
|
+
'direction.noScene': '인물만 표시: 이 게시본에는 장면이 선언되지 않았어요.',
|
|
229
|
+
'direction.legacyTake': '인물만 표시: direction@1에는 장면 합성이 없어요.',
|
|
225
230
|
"scene.required": "SCENE_REQUIRED: {0}",
|
|
226
231
|
"scene.plateChanged": "SCENE_PLATE_CHANGED: {0}",
|
|
227
232
|
"scene.plateDimensions": "SCENE_PLATE_DIMENSIONS: {0}",
|
|
228
|
-
"scene.canvasRequired": "SCENE_REQUIRED: 캔버스 렌더러가
|
|
233
|
+
"scene.canvasRequired": "SCENE_REQUIRED: 캔버스 렌더러가 필요해요.",
|
|
229
234
|
"direction.summary": "연출{0} · {1}초 · {2} · {3}",
|
|
230
235
|
"direction.loop": "반복",
|
|
231
236
|
"direction.once": "한 번",
|
|
@@ -233,24 +238,24 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
233
238
|
"direction.movingCamera": "카메라 이동",
|
|
234
239
|
"direction.inspected": "검사 모델 · {0} · SHA-256 {1}",
|
|
235
240
|
"direction.scratch": "임시 빌드 모델 · {0} · SHA-256 {1}",
|
|
236
|
-
"direction.modelUnavailable": "MODEL_UNAVAILABLE · 불러온 컴파일 모델이
|
|
241
|
+
"direction.modelUnavailable": "MODEL_UNAVAILABLE · 불러온 컴파일 모델이 없어요.",
|
|
237
242
|
"direction.package": "패키지 리비전 {0} · 소스 SHA-256 {1} · @rig-c/play {2}",
|
|
238
243
|
"direction.turn": "2.5D 회전 · {0} · 회전 패드에서 컴파일된 슬라이더를 확인하세요.",
|
|
239
|
-
"direction.turnUnavailable": "TURN_UNAVAILABLE · 불러온 모델에 지원되는 회전 다이얼이
|
|
240
|
-
"direction.depthUnavailable": "DEPTH_UNAVAILABLE · 이 재생 화면에서는 깊이를 별도로 제어할 수
|
|
244
|
+
"direction.turnUnavailable": "TURN_UNAVAILABLE · 불러온 모델에 지원되는 회전 다이얼이 없어요.",
|
|
245
|
+
"direction.depthUnavailable": "DEPTH_UNAVAILABLE · 이 재생 화면에서는 깊이를 별도로 제어할 수 없어요.",
|
|
241
246
|
"direction.sets": "부착물 세트 · {0}",
|
|
242
247
|
"direction.chooseSet": "부착물 세트 검사",
|
|
243
|
-
"direction.setsUnavailable": "SETS_UNAVAILABLE · 불러온 부착물 세트가
|
|
248
|
+
"direction.setsUnavailable": "SETS_UNAVAILABLE · 불러온 부착물 세트가 없어요.",
|
|
244
249
|
"direction.authored": "작성된 연출 · 리그 v{0} · {1} · SHA-256 {2}",
|
|
245
|
-
"direction.authoredUnavailable": "DIRECTION_METADATA_UNAVAILABLE · 화면의 모델에 연결된 연출 데이터가
|
|
246
|
-
"direction.runtimeCameraUnavailable": "CAMERA_PLAYBACK_UNAVAILABLE · 작성된 카메라와 타이밍은 여기서 읽기
|
|
250
|
+
"direction.authoredUnavailable": "DIRECTION_METADATA_UNAVAILABLE · 화면의 모델에 연결된 연출 데이터가 없어요.",
|
|
251
|
+
"direction.runtimeCameraUnavailable": "CAMERA_PLAYBACK_UNAVAILABLE · 작성된 카메라와 타이밍은 여기서 읽기 전용이에요. 이동과 확대는 검사 화면에만 적용돼요.",
|
|
247
252
|
"direction.joined": "Create 포스트 {0} · 프로젝트 기준 모델 {1} · 기록된 패키지 {2} · 프로젝트 SHA-256 {3} · 패키지 소스 SHA-256 {4}",
|
|
248
253
|
"Choose the joined Create post version.": "연결된 Create 포스트 버전을 선택하세요.",
|
|
249
|
-
"direction.cameraApplyUnavailable": "CAMERA_APPLY_UNSUPPORTED · 카메라 적용을 지원하지
|
|
254
|
+
"direction.cameraApplyUnavailable": "CAMERA_APPLY_UNSUPPORTED · 카메라 적용을 지원하지 않아요.",
|
|
250
255
|
"direction.keys": "작성된 카메라 및 타이밍 키",
|
|
251
|
-
"MODEL_UNAVAILABLE: no compiled model is supplied in this inspection.": "MODEL_UNAVAILABLE: 이 검사에 컴파일된 모델이 제공되지
|
|
252
|
-
"Embedded atlas inspection is read-only. Use the parts command for a separate sign-off.": "내장 아틀라스 검사는 읽기
|
|
253
|
-
"PARTS_ATLAS_UNAVAILABLE: the inspected package has no usable atlas or its source changed.": "PARTS_ATLAS_UNAVAILABLE: 검사 패키지에 사용 가능한 아틀라스가 없거나 원본이
|
|
256
|
+
"MODEL_UNAVAILABLE: no compiled model is supplied in this inspection.": "MODEL_UNAVAILABLE: 이 검사에 컴파일된 모델이 제공되지 않았어요.",
|
|
257
|
+
"Embedded atlas inspection is read-only. Use the parts command for a separate sign-off.": "내장 아틀라스 검사는 읽기 전용이에요. 별도 승인은 parts 명령을 사용하세요.",
|
|
258
|
+
"PARTS_ATLAS_UNAVAILABLE: the inspected package has no usable atlas or its source changed.": "PARTS_ATLAS_UNAVAILABLE: 검사 패키지에 사용 가능한 아틀라스가 없거나 원본이 변경됐어요.",
|
|
254
259
|
"PARTS_ATLAS_NOT_CARRIED: atlas inspection is not available in the parts workspace; open the rig review instead.": "PARTS_ATLAS_NOT_CARRIED: 파츠 작업 공간에서는 아틀라스를 검사할 수 없어요. 리그 리뷰를 열어 주세요.",
|
|
255
260
|
|
|
256
261
|
" (Apply's default pack flags)": " (적용의 기본 패킹 플래그)",
|
|
@@ -373,14 +378,14 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
373
378
|
"\"cut\" (shares under 0.03 dropped, what absent means) or \"continuous\"": "\"cut\" (0.03 미만 가중치 제외, 미지정 시 기본값) 또는 \"continuous\"",
|
|
374
379
|
"\"remesh\" for a remesh patch": "리메시 패치의 경우 \"remesh\"",
|
|
375
380
|
"\"rig\", \"retune\", \"build\" or \"cloth\" for a rig patch": "리그 패치의 경우 \"rig\", \"retune\", \"build\" 또는 \"cloth\"",
|
|
376
|
-
"\"{0}\" is declared twice in this mesh; each region needs its own name": "이 메시에 \"{0}\"이(가) 두 번
|
|
381
|
+
"\"{0}\" is declared twice in this mesh; each region needs its own name": "이 메시에 \"{0}\"이(가) 두 번 선언됐어요. 각 영역에는 고유한 이름이 필요해요",
|
|
377
382
|
"#{0} max {1} {2}": "#{0} 최대 {1} {2}",
|
|
378
383
|
"#{0} · {1}s → {2}s": "#{0} · {1}초 → {2}초",
|
|
379
384
|
"(absent)": "(없음)",
|
|
380
385
|
"(absent: normal)": "(없음: normal)",
|
|
381
386
|
"(no animation)": "(애니메이션 없음)",
|
|
382
387
|
"(none)": "(없음)",
|
|
383
|
-
"(pivot − depth) / (pivot − nearest depth) of the dial carries each part; turn.deform is out of scope.": "다이얼의 (피벗 − 깊이) / (피벗 − 가장 가까운 깊이) 비율로 각 파츠가 이동하며, turn.deform은 범위
|
|
388
|
+
"(pivot − depth) / (pivot − nearest depth) of the dial carries each part; turn.deform is out of scope.": "다이얼의 (피벗 − 깊이) / (피벗 − 가장 가까운 깊이) 비율로 각 파츠가 이동하며, turn.deform은 범위 외예요.",
|
|
384
389
|
"(removed)": "(제거됨)",
|
|
385
390
|
"(the one person)": "(단일 인물)",
|
|
386
391
|
"(the opened folder)": "(열린 폴더)",
|
|
@@ -400,91 +405,91 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
400
405
|
"@rig-c/play · Actual rig": "@rig-c/play · 실제 리그",
|
|
401
406
|
"A / B comparison": "A / B 비교",
|
|
402
407
|
"A actual rig mesh and bone overlay": "A 실제 리그 메시 및 본 오버레이",
|
|
403
|
-
"A and B retain their fixed source bindings. The reference video and shared animation are named above the stage.": "A와 B는 고정된 소스 바인딩을
|
|
408
|
+
"A and B retain their fixed source bindings. The reference video and shared animation are named above the stage.": "A와 B는 고정된 소스 바인딩을 유지해요. 레퍼런스 비디오와 공유 애니메이션은 스테이지 위에 표시돼요.",
|
|
404
409
|
"A explicit samples": "A 명시적 샘플",
|
|
405
410
|
"A last draw backend": "A 마지막 드로우 백엔드",
|
|
406
|
-
"A lattice (grid) entry has no regions; regions belong to the contour mode.": "격자(grid) 항목에는 영역이 없으며, 영역은 윤곽(contour) 모드에
|
|
411
|
+
"A lattice (grid) entry has no regions; regions belong to the contour mode.": "격자(grid) 항목에는 영역이 없으며, 영역은 윤곽(contour) 모드에 속해요.",
|
|
407
412
|
"A only": "A만",
|
|
408
413
|
"A report frameTimes": "A 리포트 frameTimes",
|
|
409
414
|
"ADD": "추가",
|
|
410
|
-
"ANIMATION_BONE_CONSTRAINED: bone \"{0}\" is driven by {1} constraint \"{2}\" and cannot be posed directly on stage": "ANIMATION_BONE_CONSTRAINED: 본 \"{0}\"은(는) {1} 제약 조건 \"{2}\"에 의해 구동되므로 스테이지에서 직접 포즈를 조작할 수
|
|
411
|
-
"ANIMATION_BONE_NO_TRACK: bone \"{0}\" has no editable \"{1}\" track in animation \"{2}\" ({3})": "ANIMATION_BONE_NO_TRACK: 본 \"{0}\"에 애니메이션 \"{2}\"의 편집 가능한 \"{1}\" 트랙이
|
|
415
|
+
"ANIMATION_BONE_CONSTRAINED: bone \"{0}\" is driven by {1} constraint \"{2}\" and cannot be posed directly on stage": "ANIMATION_BONE_CONSTRAINED: 본 \"{0}\"은(는) {1} 제약 조건 \"{2}\"에 의해 구동되므로 스테이지에서 직접 포즈를 조작할 수 없어요",
|
|
416
|
+
"ANIMATION_BONE_NO_TRACK: bone \"{0}\" has no editable \"{1}\" track in animation \"{2}\" ({3})": "ANIMATION_BONE_NO_TRACK: 본 \"{0}\"에 애니메이션 \"{2}\"의 편집 가능한 \"{1}\" 트랙이 없어요 ({3})",
|
|
412
417
|
"ANIMATION_BONE_NO_TRACK: unknown bone \"{0}\"": "ANIMATION_BONE_NO_TRACK: 알 수 없는 본 \"{0}\"",
|
|
413
418
|
"ANIMATION_CHANNEL_COUNT: channel mismatch ({0} vs {1})": "ANIMATION_CHANNEL_COUNT: 채널 불일치 ({0} 대 {1})",
|
|
414
419
|
"ANIMATION_CHANNEL_COUNT: expected {0} channel delta(s), got {1}": "ANIMATION_CHANNEL_COUNT: 채널 델타 {0}개가 필요하지만 {1}개가 전달됨",
|
|
415
420
|
"ANIMATION_CHANNEL_OUT_OF_RANGE: channel {0} out of [0, {1}]": "ANIMATION_CHANNEL_OUT_OF_RANGE: 채널 {0}이(가) [0, {1}] 범위를 벗어남",
|
|
416
|
-
"ANIMATION_CURVE_INVALID: curve must be \"stepped\", null, or {0} finite numbers": "ANIMATION_CURVE_INVALID: 곡선은 \"stepped\", null 또는 유한한 숫자 {0}개여야
|
|
417
|
-
"ANIMATION_CURVE_INVALID: expected {0} finite numbers": "ANIMATION_CURVE_INVALID: 유한한 숫자 {0}개가
|
|
421
|
+
"ANIMATION_CURVE_INVALID: curve must be \"stepped\", null, or {0} finite numbers": "ANIMATION_CURVE_INVALID: 곡선은 \"stepped\", null 또는 유한한 숫자 {0}개여야 해요",
|
|
422
|
+
"ANIMATION_CURVE_INVALID: expected {0} finite numbers": "ANIMATION_CURVE_INVALID: 유한한 숫자 {0}개가 필요해요",
|
|
418
423
|
"ANIMATION_CURVE_INVALID: expected {0} numbers for {1} channel(s), got {2}": "ANIMATION_CURVE_INVALID: 채널 {1}개에 대해 숫자 {0}개가 필요하지만 {2}개가 전달됨",
|
|
419
|
-
"ANIMATION_EASING_STEPPED_USE_CURVE: \"stepped\" is a curve mode; use curve: \"stepped\"": "ANIMATION_EASING_STEPPED_USE_CURVE: \"stepped\"는 곡선
|
|
424
|
+
"ANIMATION_EASING_STEPPED_USE_CURVE: \"stepped\" is a curve mode; use curve: \"stepped\"": "ANIMATION_EASING_STEPPED_USE_CURVE: \"stepped\"는 곡선 모드예요. curve: \"stepped\"를 사용하세요",
|
|
420
425
|
"ANIMATION_EASING_UNKNOWN: unknown easing \"{0}\"": "ANIMATION_EASING_UNKNOWN: 알 수 없는 이징 \"{0}\"",
|
|
421
|
-
"ANIMATION_INSPECTION_SOURCE_{0}: current model source is unavailable": "ANIMATION_INSPECTION_SOURCE_{0}: 현재 모델 소스를 사용할 수
|
|
426
|
+
"ANIMATION_INSPECTION_SOURCE_{0}: current model source is unavailable": "ANIMATION_INSPECTION_SOURCE_{0}: 현재 모델 소스를 사용할 수 없어요",
|
|
422
427
|
"ANIMATION_INSPECTION_UNAVAILABLE: ": "ANIMATION_INSPECTION_UNAVAILABLE: ",
|
|
423
|
-
"ANIMATION_JSON_PARSE: expected ',' or ']' at offset {0}": "ANIMATION_JSON_PARSE: 오프셋 {0}에 ',' 또는 ']'가
|
|
424
|
-
"ANIMATION_JSON_PARSE: expected ',' or '}' at offset {0}": "ANIMATION_JSON_PARSE: 오프셋 {0}에 ',' 또는 '}'가
|
|
425
|
-
"ANIMATION_JSON_PARSE: expected ':' at offset {0}": "ANIMATION_JSON_PARSE: 오프셋 {0}에 ':'가
|
|
426
|
-
"ANIMATION_JSON_PARSE: expected string at offset {0}": "ANIMATION_JSON_PARSE: 오프셋 {0}에 문자열이
|
|
428
|
+
"ANIMATION_JSON_PARSE: expected ',' or ']' at offset {0}": "ANIMATION_JSON_PARSE: 오프셋 {0}에 ',' 또는 ']'가 필요해요",
|
|
429
|
+
"ANIMATION_JSON_PARSE: expected ',' or '}' at offset {0}": "ANIMATION_JSON_PARSE: 오프셋 {0}에 ',' 또는 '}'가 필요해요",
|
|
430
|
+
"ANIMATION_JSON_PARSE: expected ':' at offset {0}": "ANIMATION_JSON_PARSE: 오프셋 {0}에 ':'가 필요해요",
|
|
431
|
+
"ANIMATION_JSON_PARSE: expected string at offset {0}": "ANIMATION_JSON_PARSE: 오프셋 {0}에 문자열이 필요해요",
|
|
427
432
|
"ANIMATION_JSON_PARSE: unexpected end of input": "ANIMATION_JSON_PARSE: 예기치 않은 입력 끝",
|
|
428
433
|
"ANIMATION_JSON_PARSE: unexpected token at offset {0}": "ANIMATION_JSON_PARSE: 오프셋 {0}에 예기치 않은 토큰",
|
|
429
434
|
"ANIMATION_JSON_PARSE: unterminated array at offset {0}": "ANIMATION_JSON_PARSE: 오프셋 {0}에 닫히지 않은 배열",
|
|
430
435
|
"ANIMATION_JSON_PARSE: unterminated object at offset {0}": "ANIMATION_JSON_PARSE: 오프셋 {0}에 닫히지 않은 객체",
|
|
431
436
|
"ANIMATION_JSON_PARSE: unterminated string at offset {0}": "ANIMATION_JSON_PARSE: 오프셋 {0}에 닫히지 않은 문자열",
|
|
432
|
-
"ANIMATION_KEY_DUPLICATE_TIME: a key already exists at t={0}": "ANIMATION_KEY_DUPLICATE_TIME: t={0}에 이미 키가
|
|
433
|
-
"ANIMATION_KEY_EASING_AND_CURVE: a key cannot carry both ease and curve": "ANIMATION_KEY_EASING_AND_CURVE: 하나의 키에 이징과 곡선을 동시에 지정할 수
|
|
437
|
+
"ANIMATION_KEY_DUPLICATE_TIME: a key already exists at t={0}": "ANIMATION_KEY_DUPLICATE_TIME: t={0}에 이미 키가 존재해요",
|
|
438
|
+
"ANIMATION_KEY_EASING_AND_CURVE: a key cannot carry both ease and curve": "ANIMATION_KEY_EASING_AND_CURVE: 하나의 키에 이징과 곡선을 동시에 지정할 수 없어요",
|
|
434
439
|
"ANIMATION_KEY_ORDER: invalid segment [{0}, {1}]": "ANIMATION_KEY_ORDER: 유효하지 않은 세그먼트 [{0}, {1}]",
|
|
435
|
-
"ANIMATION_KEY_ORDER: segment [{0}, {1}] -> [{2}, {3}] must have positive duration": "ANIMATION_KEY_ORDER: 세그먼트 [{0}, {1}] -> [{2}, {3}]의 길이는 양수여야
|
|
436
|
-
"ANIMATION_KEY_ORDER: {0} key {1} time {2} must be < next key {3} time {4}": "ANIMATION_KEY_ORDER: {0} 키 {1} 시간({2})은 다음 키 {3} 시간({4})보다 작아야
|
|
437
|
-
"ANIMATION_KEY_ORDER: {0} key {1} time {2} must be > previous key {3} time {4}": "ANIMATION_KEY_ORDER: {0} 키 {1} 시간({2})은 이전 키 {3} 시간({4})보다 커야
|
|
440
|
+
"ANIMATION_KEY_ORDER: segment [{0}, {1}] -> [{2}, {3}] must have positive duration": "ANIMATION_KEY_ORDER: 세그먼트 [{0}, {1}] -> [{2}, {3}]의 길이는 양수여야 해요",
|
|
441
|
+
"ANIMATION_KEY_ORDER: {0} key {1} time {2} must be < next key {3} time {4}": "ANIMATION_KEY_ORDER: {0} 키 {1} 시간({2})은 다음 키 {3} 시간({4})보다 작아야 해요",
|
|
442
|
+
"ANIMATION_KEY_ORDER: {0} key {1} time {2} must be > previous key {3} time {4}": "ANIMATION_KEY_ORDER: {0} 키 {1} 시간({2})은 이전 키 {3} 시간({4})보다 커야 해요",
|
|
438
443
|
"ANIMATION_KEY_OUT_OF_RANGE: animation \"{0}\" track {1} (\"{2}.{3}\") key index {4} out of [0, {5}]": "ANIMATION_KEY_OUT_OF_RANGE: 애니메이션 \"{0}\" 트랙 {1} (\"{2}.{3}\") 키 인덱스 {4}이(가) [0, {5}] 범위를 벗어남",
|
|
439
444
|
"ANIMATION_KEY_OUT_OF_RANGE: key index {0} out of [0, {1}]": "ANIMATION_KEY_OUT_OF_RANGE: 키 인덱스 {0}이(가) [0, {1}] 범위를 벗어남",
|
|
440
445
|
"ANIMATION_KEY_OUT_OF_RANGE: key {0} on track {1}": "ANIMATION_KEY_OUT_OF_RANGE: 트랙 {1}의 키 {0} 범위 초과",
|
|
441
|
-
"ANIMATION_KEY_OUT_OF_RANGE: no keys selected to delete": "ANIMATION_KEY_OUT_OF_RANGE: 삭제할 선택된 키가
|
|
446
|
+
"ANIMATION_KEY_OUT_OF_RANGE: no keys selected to delete": "ANIMATION_KEY_OUT_OF_RANGE: 삭제할 선택된 키가 없어요",
|
|
442
447
|
"ANIMATION_KEY_OUT_OF_RANGE: {0} key index {1} out of [0, {2}]": "ANIMATION_KEY_OUT_OF_RANGE: {0} 키 인덱스 {1}이(가) [0, {2}] 범위를 벗어남",
|
|
443
448
|
"ANIMATION_KEY_TIME_INVALID: animation \"{0}\" deltaTime must be finite, got {1}": "ANIMATION_KEY_TIME_INVALID: 애니메이션 \"{0}\" deltaTime은 유한한 값이어야 하지만 {1}이(가) 전달됨",
|
|
444
449
|
"ANIMATION_KEY_TIME_INVALID: key time must be a finite number >= 0, got {0}": "ANIMATION_KEY_TIME_INVALID: 키 시간은 0 이상의 유한한 숫자여야 하지만 {0}이(가) 전달됨",
|
|
445
450
|
"ANIMATION_KEY_TIME_INVALID: {0} key {1} time must be a finite number >= 0, got {2}": "ANIMATION_KEY_TIME_INVALID: {0} 키 {1} 시간은 0 이상의 유한한 숫자여야 하지만 {2}이(가) 전달됨",
|
|
446
|
-
"ANIMATION_LAST_KEY_CURVE: the last key of a track cannot carry a curve": "ANIMATION_LAST_KEY_CURVE: 트랙의 마지막 키에는 곡선을 지정할 수
|
|
447
|
-
"ANIMATION_LAST_KEY_EASING: the last key of a track cannot carry an easing": "ANIMATION_LAST_KEY_EASING: 트랙의 마지막 키에는 이징을 지정할 수
|
|
448
|
-
"ANIMATION_NUMBER_NONFINITE: channel {0} delta is {1}": "ANIMATION_NUMBER_NONFINITE: 채널 {0} 델타가 {1}
|
|
449
|
-
"ANIMATION_NUMBER_NONFINITE: channel {0} endpoint is non-finite": "ANIMATION_NUMBER_NONFINITE: 채널 {0} 끝점이 유한하지
|
|
451
|
+
"ANIMATION_LAST_KEY_CURVE: the last key of a track cannot carry a curve": "ANIMATION_LAST_KEY_CURVE: 트랙의 마지막 키에는 곡선을 지정할 수 없어요",
|
|
452
|
+
"ANIMATION_LAST_KEY_EASING: the last key of a track cannot carry an easing": "ANIMATION_LAST_KEY_EASING: 트랙의 마지막 키에는 이징을 지정할 수 없어요",
|
|
453
|
+
"ANIMATION_NUMBER_NONFINITE: channel {0} delta is {1}": "ANIMATION_NUMBER_NONFINITE: 채널 {0} 델타가 {1}이에요",
|
|
454
|
+
"ANIMATION_NUMBER_NONFINITE: channel {0} endpoint is non-finite": "ANIMATION_NUMBER_NONFINITE: 채널 {0} 끝점이 유한하지 않아요",
|
|
450
455
|
"ANIMATION_NUMBER_NONFINITE: {0}": "ANIMATION_NUMBER_NONFINITE: {0}",
|
|
451
|
-
"ANIMATION_OPS_EMPTY: no pending animation ops to apply": "ANIMATION_OPS_EMPTY: 적용할 보류 중인 애니메이션 작업이
|
|
452
|
-
"ANIMATION_OPS_TOO_MANY: animation \"{0}\" selection delete of {1} keys with {2} pending op(s) exceeds MAX_ANIMATION_OPS ({3})": "ANIMATION_OPS_TOO_MANY: 애니메이션 \"{0}\"에서 보류 작업 {2}개와 함께 키 {1}개를 선택 삭제하면 MAX_ANIMATION_OPS({3})를
|
|
453
|
-
"ANIMATION_OPS_TOO_MANY: animation \"{0}\" selection move of {1} keys exceeds MAX_ANIMATION_OPS ({2})": "ANIMATION_OPS_TOO_MANY: 애니메이션 \"{0}\"에서 키 {1}개 선택 이동이 MAX_ANIMATION_OPS({2})를
|
|
454
|
-
"ANIMATION_OPS_TOO_MANY: animation \"{0}\" selection move of {1} keys with {2} pending op(s) exceeds MAX_ANIMATION_OPS ({3})": "ANIMATION_OPS_TOO_MANY: 애니메이션 \"{0}\"에서 보류 작업 {2}개와 함께 키 {1}개를 선택 이동하면 MAX_ANIMATION_OPS({3})를
|
|
455
|
-
"ANIMATION_OPS_TOO_MANY: animation \"{0}\" track {1} operation \"{2}\" exceeds MAX_ANIMATION_OPS ({3})": "ANIMATION_OPS_TOO_MANY: 애니메이션 \"{0}\" 트랙 {1} 작업 \"{2}\"이(가) MAX_ANIMATION_OPS({3})를
|
|
456
|
+
"ANIMATION_OPS_EMPTY: no pending animation ops to apply": "ANIMATION_OPS_EMPTY: 적용할 보류 중인 애니메이션 작업이 없어요",
|
|
457
|
+
"ANIMATION_OPS_TOO_MANY: animation \"{0}\" selection delete of {1} keys with {2} pending op(s) exceeds MAX_ANIMATION_OPS ({3})": "ANIMATION_OPS_TOO_MANY: 애니메이션 \"{0}\"에서 보류 작업 {2}개와 함께 키 {1}개를 선택 삭제하면 MAX_ANIMATION_OPS({3})를 초과해요",
|
|
458
|
+
"ANIMATION_OPS_TOO_MANY: animation \"{0}\" selection move of {1} keys exceeds MAX_ANIMATION_OPS ({2})": "ANIMATION_OPS_TOO_MANY: 애니메이션 \"{0}\"에서 키 {1}개 선택 이동이 MAX_ANIMATION_OPS({2})를 초과해요",
|
|
459
|
+
"ANIMATION_OPS_TOO_MANY: animation \"{0}\" selection move of {1} keys with {2} pending op(s) exceeds MAX_ANIMATION_OPS ({3})": "ANIMATION_OPS_TOO_MANY: 애니메이션 \"{0}\"에서 보류 작업 {2}개와 함께 키 {1}개를 선택 이동하면 MAX_ANIMATION_OPS({3})를 초과해요",
|
|
460
|
+
"ANIMATION_OPS_TOO_MANY: animation \"{0}\" track {1} operation \"{2}\" exceeds MAX_ANIMATION_OPS ({3})": "ANIMATION_OPS_TOO_MANY: 애니메이션 \"{0}\" 트랙 {1} 작업 \"{2}\"이(가) MAX_ANIMATION_OPS({3})를 초과해요",
|
|
456
461
|
"ANIMATION_OP_UNKNOWN: {0}": "ANIMATION_OP_UNKNOWN: {0}",
|
|
457
|
-
"ANIMATION_OVERLAPPING_SPANS: [{0}, {1}) overlaps [{2}, {3})": "ANIMATION_OVERLAPPING_SPANS: [{0}, {1}) 구간이 [{2}, {3}) 구간과
|
|
458
|
-
"ANIMATION_SOURCE_MISSING: animation source is not loaded": "ANIMATION_SOURCE_MISSING: 애니메이션 소스가 로드되지
|
|
459
|
-
"ANIMATION_SOURCE_MISSING: config motion.animations_from ({0}) does not exist": "ANIMATION_SOURCE_MISSING: 설정의 motion.animations_from({0}) 파일이 존재하지
|
|
460
|
-
"ANIMATION_SOURCE_MISSING: config motion.animations_from ({0}) is missing from the handoff": "ANIMATION_SOURCE_MISSING: 설정의 motion.animations_from({0}) 파일이 핸드오프에
|
|
461
|
-
"ANIMATION_SOURCE_MISSING: config.json does not declare an \"animations_from\" motion spec file.": "ANIMATION_SOURCE_MISSING: config.json에 \"animations_from\" 모션 사양 파일이 선언되어 있지
|
|
462
|
+
"ANIMATION_OVERLAPPING_SPANS: [{0}, {1}) overlaps [{2}, {3})": "ANIMATION_OVERLAPPING_SPANS: [{0}, {1}) 구간이 [{2}, {3}) 구간과 겹쳐요",
|
|
463
|
+
"ANIMATION_SOURCE_MISSING: animation source is not loaded": "ANIMATION_SOURCE_MISSING: 애니메이션 소스가 로드되지 않았어요",
|
|
464
|
+
"ANIMATION_SOURCE_MISSING: config motion.animations_from ({0}) does not exist": "ANIMATION_SOURCE_MISSING: 설정의 motion.animations_from({0}) 파일이 존재하지 않아요",
|
|
465
|
+
"ANIMATION_SOURCE_MISSING: config motion.animations_from ({0}) is missing from the handoff": "ANIMATION_SOURCE_MISSING: 설정의 motion.animations_from({0}) 파일이 핸드오프에 없어요",
|
|
466
|
+
"ANIMATION_SOURCE_MISSING: config.json does not declare an \"animations_from\" motion spec file.": "ANIMATION_SOURCE_MISSING: config.json에 \"animations_from\" 모션 사양 파일이 선언되어 있지 않아요.",
|
|
462
467
|
"ANIMATION_SPAN_NOT_ARRAY: /{0}": "ANIMATION_SPAN_NOT_ARRAY: /{0}",
|
|
463
468
|
"ANIMATION_SPAN_NOT_FOUND: /{0}": "ANIMATION_SPAN_NOT_FOUND: /{0}",
|
|
464
469
|
"ANIMATION_SPAN_NOT_OBJECT: /{0}": "ANIMATION_SPAN_NOT_OBJECT: /{0}",
|
|
465
|
-
"ANIMATION_TRACK_MIN_KEYS: {0} cannot delete key {1}; cannot delete the only key on a track (has {2})": "ANIMATION_TRACK_MIN_KEYS: {0}에서 키 {1}을(를) 삭제할 수
|
|
466
|
-
"ANIMATION_TRACK_MIN_KEYS: {0} cannot delete {1} of {2} key(s); cannot delete the only key on a track": "ANIMATION_TRACK_MIN_KEYS: {0}에서 키 {2}개 중 {1}개를 삭제할 수
|
|
470
|
+
"ANIMATION_TRACK_MIN_KEYS: {0} cannot delete key {1}; cannot delete the only key on a track (has {2})": "ANIMATION_TRACK_MIN_KEYS: {0}에서 키 {1}을(를) 삭제할 수 없어요. 트랙의 유일한 키는 삭제할 수 없어요(현재 {2}개)",
|
|
471
|
+
"ANIMATION_TRACK_MIN_KEYS: {0} cannot delete {1} of {2} key(s); cannot delete the only key on a track": "ANIMATION_TRACK_MIN_KEYS: {0}에서 키 {2}개 중 {1}개를 삭제할 수 없어요. 트랙의 유일한 키는 삭제할 수 없어요",
|
|
467
472
|
"ANIMATION_TRACK_OUT_OF_RANGE: animation \"{0}\" has {1} track(s), got index {2}": "ANIMATION_TRACK_OUT_OF_RANGE: 애니메이션 \"{0}\"에는 트랙이 {1}개 있으나 인덱스 {2}이(가) 전달됨",
|
|
468
473
|
"ANIMATION_TRACK_OUT_OF_RANGE: track {0}": "ANIMATION_TRACK_OUT_OF_RANGE: 트랙 {0} 범위 초과",
|
|
469
|
-
"ANIMATION_TRACK_READ_ONLY: bone track \"{0}.{1}\" is not an editable source track in {2}": "ANIMATION_TRACK_READ_ONLY: 본 트랙 \"{0}.{1}\"은(는) {2}에서 편집 가능한 소스 트랙이
|
|
470
|
-
"ANIMATION_TRACK_READ_ONLY: curve handles are read-only on this track": "ANIMATION_TRACK_READ_ONLY: 이 트랙의 곡선 핸들은 읽기
|
|
471
|
-
"ANIMATION_TRACK_READ_ONLY: slot track \"{0}.{1}\" is read-only in v1": "ANIMATION_TRACK_READ_ONLY: 슬롯 트랙 \"{0}.{1}\"은(는) v1에서 읽기
|
|
472
|
-
"ANIMATION_TRACK_READ_ONLY: track is read-only": "ANIMATION_TRACK_READ_ONLY: 트랙이 읽기
|
|
474
|
+
"ANIMATION_TRACK_READ_ONLY: bone track \"{0}.{1}\" is not an editable source track in {2}": "ANIMATION_TRACK_READ_ONLY: 본 트랙 \"{0}.{1}\"은(는) {2}에서 편집 가능한 소스 트랙이 아니에요",
|
|
475
|
+
"ANIMATION_TRACK_READ_ONLY: curve handles are read-only on this track": "ANIMATION_TRACK_READ_ONLY: 이 트랙의 곡선 핸들은 읽기 전용이에요",
|
|
476
|
+
"ANIMATION_TRACK_READ_ONLY: slot track \"{0}.{1}\" is read-only in v1": "ANIMATION_TRACK_READ_ONLY: 슬롯 트랙 \"{0}.{1}\"은(는) v1에서 읽기 전용이에요",
|
|
477
|
+
"ANIMATION_TRACK_READ_ONLY: track is read-only": "ANIMATION_TRACK_READ_ONLY: 트랙이 읽기 전용이에요",
|
|
473
478
|
"ANIMATION_TRACK_READ_ONLY: unsupported bone property \"{0}\"": "ANIMATION_TRACK_READ_ONLY: 지원되지 않는 본 속성 \"{0}\"",
|
|
474
479
|
"ANIMATION_TRACK_READ_ONLY: {0}": "ANIMATION_TRACK_READ_ONLY: {0}",
|
|
475
|
-
"ANIMATION_VALUE_INVALID: expected array of {0} finite number(s)": "ANIMATION_VALUE_INVALID: 유한한 숫자 {0}개의 배열이
|
|
476
|
-
"ANIMATION_VALUE_INVALID: expected finite number for channel {0}": "ANIMATION_VALUE_INVALID: 채널 {0}에는 유한한 숫자가
|
|
477
|
-
"ANIMATION_VALUE_INVALID: expected {0} finite channel value(s)": "ANIMATION_VALUE_INVALID: 유한한 채널 값 {0}개가
|
|
480
|
+
"ANIMATION_VALUE_INVALID: expected array of {0} finite number(s)": "ANIMATION_VALUE_INVALID: 유한한 숫자 {0}개의 배열이 필요해요",
|
|
481
|
+
"ANIMATION_VALUE_INVALID: expected finite number for channel {0}": "ANIMATION_VALUE_INVALID: 채널 {0}에는 유한한 숫자가 필요해요",
|
|
482
|
+
"ANIMATION_VALUE_INVALID: expected {0} finite channel value(s)": "ANIMATION_VALUE_INVALID: 유한한 채널 값 {0}개가 필요해요",
|
|
478
483
|
"APPLIED RECORDS": "적용된 기록",
|
|
479
484
|
"APPLIED_DROP_STATEMENT_UNAVAILABLE: {0}": "APPLIED_DROP_STATEMENT_UNAVAILABLE: {0}",
|
|
480
485
|
"Actual bone or slot name": "실제 본 또는 슬롯 이름",
|
|
481
486
|
"Actual idle · repeat enabled": "실제 아이들 · 반복 활성화됨",
|
|
482
487
|
"Actual last-drawn mesh edges / bone points": "실제 마지막으로 그려진 메시 엣지 / 본 포인트",
|
|
483
|
-
"Actual rig identifier for the selected package.": "선택된 패키지의 실제 리그
|
|
484
|
-
"Actual rig identifier for this package.": "이 패키지의 실제 리그
|
|
488
|
+
"Actual rig identifier for the selected package.": "선택된 패키지의 실제 리그 식별자예요.",
|
|
489
|
+
"Actual rig identifier for this package.": "이 패키지의 실제 리그 식별자예요.",
|
|
485
490
|
"Actual rig mesh and bone overlay": "실제 리그 메시 및 본 오버레이",
|
|
486
491
|
"Actual rig slots": "실제 리그 슬롯",
|
|
487
|
-
"Actual target catalog unavailable · bone and slot feedback cannot be added.": "실제 대상 카탈로그 사용 불가 · 본 및 슬롯 피드백을 추가할 수
|
|
492
|
+
"Actual target catalog unavailable · bone and slot feedback cannot be added.": "실제 대상 카탈로그 사용 불가 · 본 및 슬롯 피드백을 추가할 수 없어요.",
|
|
488
493
|
"Actual target name": "실제 타깃 이름",
|
|
489
494
|
"Add": "추가",
|
|
490
495
|
"Add base": "베이스 추가",
|
|
@@ -495,16 +500,16 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
495
500
|
"Add requirement": "요구사항 추가",
|
|
496
501
|
"Add still row": "고정 행 추가",
|
|
497
502
|
"Add track": "트랙 추가",
|
|
498
|
-
"Added a circle region; drag its centre on the stage (Drag on stage), set its bone, spacing and band here.": "원형 영역을
|
|
499
|
-
"Added a polygon region; drag its vertices on the stage (Drag on stage).": "다각형 영역을
|
|
500
|
-
"Added feedback bound to the target build and both reviewed sources.": "대상 빌드 및 두 리뷰 소스에 바인딩된 피드백을
|
|
501
|
-
"Added structured feedback. Submit the review to save it.": "구조화 피드백을
|
|
502
|
-
"Added {0}: Apply runs rig-parts build; the producer judges the polygon or box.": "{0} 추가됨: 적용 시 rig-parts build를 실행하며 프로듀서가 다각형 또는 박스를
|
|
503
|
+
"Added a circle region; drag its centre on the stage (Drag on stage), set its bone, spacing and band here.": "원형 영역을 추가했어요. 스테이지에서 중심을 드래그하고(스테이지에서 드래그), 여기서 본, 간격 및 밴드를 설정하세요.",
|
|
504
|
+
"Added a polygon region; drag its vertices on the stage (Drag on stage).": "다각형 영역을 추가했어요. 스테이지에서 정점을 드래그하세요(스테이지에서 드래그).",
|
|
505
|
+
"Added feedback bound to the target build and both reviewed sources.": "대상 빌드 및 두 리뷰 소스에 바인딩된 피드백을 추가했어요.",
|
|
506
|
+
"Added structured feedback. Submit the review to save it.": "구조화 피드백을 추가했어요. 저장하려면 리뷰를 제출하세요.",
|
|
507
|
+
"Added {0}: Apply runs rig-parts build; the producer judges the polygon or box.": "{0} 추가됨: 적용 시 rig-parts build를 실행하며 프로듀서가 다각형 또는 박스를 판정해요.",
|
|
503
508
|
"Added {0}; set its bar, then Check.": "{0} 추가됨. 기준치를 설정한 뒤 검사를 실행하세요.",
|
|
504
509
|
"All events": "모든 이벤트",
|
|
505
510
|
"All feedback ranges": "모든 피드백 구간",
|
|
506
511
|
"Alpha, core ratio": "알파, 코어 비율",
|
|
507
|
-
"An animation Apply builds from the handoff config.json and animations_from file into scratch (rig-parts rig → rigc build → rig-parts check), so it does not carry another kind's Apply on the stage.": "애니메이션 적용은 핸드오프 config.json 및 animations_from 파일로부터 임시 빌드를 생성하므로(rig-parts rig → rigc build → rig-parts check), 스테이지의 다른 유형 적용을 함께 유지하지
|
|
512
|
+
"An animation Apply builds from the handoff config.json and animations_from file into scratch (rig-parts rig → rigc build → rig-parts check), so it does not carry another kind's Apply on the stage.": "애니메이션 적용은 핸드오프 config.json 및 animations_from 파일로부터 임시 빌드를 생성하므로(rig-parts rig → rigc build → rig-parts check), 스테이지의 다른 유형 적용을 함께 유지하지 않아요.",
|
|
508
513
|
"Angle inspection": "각도 검사",
|
|
509
514
|
"Angle range": "각도 범위",
|
|
510
515
|
"Angle range bone": "각도 범위 본",
|
|
@@ -514,9 +519,9 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
514
519
|
"Animate blocks": "애니메이트 블록",
|
|
515
520
|
"Animation": "애니메이션",
|
|
516
521
|
"Animation ": "애니메이션 ",
|
|
517
|
-
"Animation \"idle\" is generated by rig-parts from config.json idle/blink/turn parameters; use the Turn & Idle controls.": "애니메이션 \"idle\"은 config.json의 idle/blink/turn 파라미터로부터 rig-parts가
|
|
518
|
-
"Animation \"{0}\" is not declared in \"{1}\".": "애니메이션 \"{0}\"이(가) \"{1}\"에 선언되어 있지
|
|
519
|
-
"Animation \"{0}\" is not present in the rig.": "애니메이션 \"{0}\"이(가) 리그에
|
|
522
|
+
"Animation \"idle\" is generated by rig-parts from config.json idle/blink/turn parameters; use the Turn & Idle controls.": "애니메이션 \"idle\"은 config.json의 idle/blink/turn 파라미터로부터 rig-parts가 생성해요. 회전 및 아이들(Turn & Idle) 컨트롤을 사용하세요.",
|
|
523
|
+
"Animation \"{0}\" is not declared in \"{1}\".": "애니메이션 \"{0}\"이(가) \"{1}\"에 선언되어 있지 않아요.",
|
|
524
|
+
"Animation \"{0}\" is not present in the rig.": "애니메이션 \"{0}\"이(가) 리그에 없어요.",
|
|
520
525
|
"Animation inspection views": "애니메이션 검사 뷰",
|
|
521
526
|
"Animation timeline": "애니메이션 타임라인",
|
|
522
527
|
"Animation timeline & inspection": "애니메이션 타임라인 및 검사",
|
|
@@ -531,13 +536,13 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
531
536
|
"Applied": "적용됨",
|
|
532
537
|
"Applied ": "적용됨 ",
|
|
533
538
|
"Applied mesh edit ": "적용된 메시 편집 ",
|
|
534
|
-
"Applied mesh edit {0}… ({1} op(s) on {2}) with {3} {4} · {5}{6} · {7} · Reset returns to the inspected build": "{3} {4}로 메시 편집 {0}…({2}에 작업 {1}개) 적용됨 · {5}{6} · {7} · 초기화 시 점검 중인 빌드로
|
|
539
|
+
"Applied mesh edit {0}… ({1} op(s) on {2}) with {3} {4} · {5}{6} · {7} · Reset returns to the inspected build": "{3} {4}로 메시 편집 {0}…({2}에 작업 {1}개) 적용됨 · {5}{6} · {7} · 초기화 시 점검 중인 빌드로 돌아가요",
|
|
535
540
|
"Applied patch ": "적용된 패치 ",
|
|
536
|
-
"Applied patch {0}… ({1} op(s)) with {2} {3} · {4} · {5}{6} · {7} · Reset returns to the inspected build": "{2} {3}로 패치 {0}…(작업 {1}개) 적용됨 · {4} · {5}{6} · {7} · 초기화 시 점검 중인 빌드로
|
|
541
|
+
"Applied patch {0}… ({1} op(s)) with {2} {3} · {4} · {5}{6} · {7} · Reset returns to the inspected build": "{2} {3}로 패치 {0}…(작업 {1}개) 적용됨 · {4} · {5}{6} · {7} · 초기화 시 점검 중인 빌드로 돌아가요",
|
|
537
542
|
"Applied {0} on {1} track {2} ({3} pending op(s), preview active).": "{1} 트랙 {2}에 {0} 적용됨 (보류 중인 작업 {3}개, 미리보기 활성).",
|
|
538
|
-
"Applied {0} with {1} {2}{3} · Reset returns to the inspected build": "{1} {2}{3}로 {0} 적용됨 · 초기화 시 점검 중인 빌드로
|
|
543
|
+
"Applied {0} with {1} {2}{3} · Reset returns to the inspected build": "{1} {2}{3}로 {0} 적용됨 · 초기화 시 점검 중인 빌드로 돌아가요",
|
|
539
544
|
"Applied {0}… ({1} op(s) on {2}) with {3} {4} · {5} · {6}{7} · {8}": "{3} {4}로 {0}…({2}에 작업 {1}개) 적용됨 · {5} · {6}{7} · {8}",
|
|
540
|
-
"Applied: it is an applied record now": "적용됨: 현재 적용된
|
|
545
|
+
"Applied: it is an applied record now": "적용됨: 현재 적용된 레코드예요",
|
|
541
546
|
"Apply": "적용",
|
|
542
547
|
"Apply · Rebuild": "적용 · 리빌드",
|
|
543
548
|
"Apply · Retarget": "적용 · 리타겟",
|
|
@@ -549,16 +554,16 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
549
554
|
"Applying {0} animation op(s) on {1} (rig-parts rig → rigc build → rig-parts check)…": "{1}에 애니메이션 작업 {0}개 적용 중 (rig-parts rig → rigc build → rig-parts check)…",
|
|
550
555
|
"Applying {0} op(s) on Build {1}…": "빌드 {1}에 작업 {0}개 적용 중…",
|
|
551
556
|
"Applying {0} op(s) on {1}: remesh --delta, compile…": "{1}에 작업 {0}개 적용 중: remesh --delta, 컴파일…",
|
|
552
|
-
"Applying {0} op(s) with {1} {2}: build (assemble → rig → check), compile… (a full build takes minutes)": "{1} {2}로 작업 {0}개 적용 중: 빌드(assemble → rig → check), 컴파일… (전체 빌드는 수 분이
|
|
557
|
+
"Applying {0} op(s) with {1} {2}: build (assemble → rig → check), compile… (a full build takes minutes)": "{1} {2}로 작업 {0}개 적용 중: 빌드(assemble → rig → check), 컴파일… (전체 빌드는 수 분이 걸려요)",
|
|
553
558
|
"Applying {0} op(s) with {1} {2}: propose --cloth --write-config, then {3}, compile…": "{1} {2}로 작업 {0}개 적용 중: propose --cloth --write-config 후 {3}, 컴파일…",
|
|
554
559
|
"Applying {0} op(s) with {1} {2}: {3} --config, compile, check…": "{1} {2}로 작업 {0}개 적용 중: {3} --config, 컴파일, 검사…",
|
|
555
560
|
"Applying {0} op(s) with {1} {2}: {3} --config{4}, compile, check…": "{1} {2}로 작업 {0}개 적용 중: {3} --config{4}, 컴파일, 검사…",
|
|
556
561
|
"Approved": "승인됨",
|
|
557
562
|
"Arrow": "화살표",
|
|
558
563
|
"Asset not declared by package": "패키지에 선언되지 않은 에셋",
|
|
559
|
-
"Asset {0} changed while hashing; retry with stable package inputs": "해싱 중 에셋 {0}이(가)
|
|
564
|
+
"Asset {0} changed while hashing; retry with stable package inputs": "해싱 중 에셋 {0}이(가) 변경됐어요. 안정된 패키지 입력으로 다시 시도하세요",
|
|
560
565
|
"Audio links": "오디오 링크",
|
|
561
|
-
"Audio playback was refused: {0}": "오디오 재생이
|
|
566
|
+
"Audio playback was refused: {0}": "오디오 재생이 거부됐어요: {0}",
|
|
562
567
|
"Audio volume": "오디오 볼륨",
|
|
563
568
|
"Audition": "오디션",
|
|
564
569
|
"B actual rig mesh and bone overlay": "B 실제 리그 메시 및 본 오버레이",
|
|
@@ -572,12 +577,12 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
572
577
|
"BONES[I].INHERIT · WHAT A BONE TAKES FROM ITS PARENT": "BONES[I].INHERIT · 부모 본으로부터의 상속 모드",
|
|
573
578
|
"BONES_ANCHOR_UNKNOWN: {0}": "BONES_ANCHOR_UNKNOWN: {0}",
|
|
574
579
|
"BONES_CHECK_BODY_LIMIT: maximum 64 KiB": "BONES_CHECK_BODY_LIMIT: 최대 64 KiB",
|
|
575
|
-
"BONES_NOTHING_PENDING: no pending ops": "BONES_NOTHING_PENDING: 보류 중인 작업이
|
|
576
|
-
"BONES_UNAVAILABLE: no producer handoff": "BONES_UNAVAILABLE: 프로듀서 핸드오프가
|
|
577
|
-
"BONES_VALUE_INVALID: {0} {1} must be a number": "BONES_VALUE_INVALID: {0} {1}은(는) 숫자여야
|
|
580
|
+
"BONES_NOTHING_PENDING: no pending ops": "BONES_NOTHING_PENDING: 보류 중인 작업이 없어요",
|
|
581
|
+
"BONES_UNAVAILABLE: no producer handoff": "BONES_UNAVAILABLE: 프로듀서 핸드오프가 없어요",
|
|
582
|
+
"BONES_VALUE_INVALID: {0} {1} must be a number": "BONES_VALUE_INVALID: {0} {1}은(는) 숫자여야 해요",
|
|
578
583
|
"Back": "되돌리기",
|
|
579
|
-
"Back: Build {0} shows {1}.": "돌아가기: 빌드 {0}에 {1}이(가)
|
|
580
|
-
"Back: the stage shows {0}.": "돌아가기: 스테이지에 {0}이(가)
|
|
584
|
+
"Back: Build {0} shows {1}.": "돌아가기: 빌드 {0}에 {1}이(가) 표시돼요.",
|
|
585
|
+
"Back: the stage shows {0}.": "돌아가기: 스테이지에 {0}이(가) 표시돼요.",
|
|
581
586
|
"Band": "밴드",
|
|
582
587
|
"Blink time": "블링크 시간",
|
|
583
588
|
"Body-18 chains": "Body-18 체인",
|
|
@@ -587,9 +592,9 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
587
592
|
"Bone R": "본 R",
|
|
588
593
|
"Bone for a new track": "새 트랙의 본",
|
|
589
594
|
"Bone for inherit": "상속 설정할 본",
|
|
590
|
-
"Bone overlay {0}: invalid declared length": "본 오버레이 {0}: 선언된 길이가 유효하지
|
|
595
|
+
"Bone overlay {0}: invalid declared length": "본 오버레이 {0}: 선언된 길이가 유효하지 않아요",
|
|
591
596
|
"Bone overlay {0}: {1}": "본 오버레이 {0}: {1}",
|
|
592
|
-
"Bone overlay: missing or duplicate declared name": "본 오버레이: 선언된 이름이 누락되었거나
|
|
597
|
+
"Bone overlay: missing or duplicate declared name": "본 오버레이: 선언된 이름이 누락되었거나 중복됐어요",
|
|
593
598
|
"Bone points": "본 포인트",
|
|
594
599
|
"Bone the new part's region rides": "새 파츠 영역이 따르는 본",
|
|
595
600
|
"Bone to add as a segment": "세그먼트로 추가할 본",
|
|
@@ -599,35 +604,35 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
599
604
|
"Bones anchors": "본 앵커",
|
|
600
605
|
"Bones {0}": "본 {0}",
|
|
601
606
|
"Both builds, versions and reference video hash": "양쪽 빌드, 버전 및 레퍼런스 비디오 해시",
|
|
602
|
-
"Both panes share the same values over the intersection of their declared ranges. Axes absent on either side are not offered.": "두 창은 선언된 범위의 교집합에서 동일한 값을
|
|
607
|
+
"Both panes share the same values over the intersection of their declared ranges. Axes absent on either side are not offered.": "두 창은 선언된 범위의 교집합에서 동일한 값을 공유해요. 어느 한쪽에라도 없는 축은 제공되지 않아요.",
|
|
603
608
|
"Bound non-idle inspection · no automatic playback": "비아이들 점검 바인딩됨 · 자동 재생 안 함",
|
|
604
|
-
"Bounds unknown · enter an inclusive integer frame range. FPS is not inferred.": "범위 알 수 없음 · 시작과 끝을 포함하는 정수 프레임 범위를 입력하세요. FPS는 추론되지
|
|
609
|
+
"Bounds unknown · enter an inclusive integer frame range. FPS is not inferred.": "범위 알 수 없음 · 시작과 끝을 포함하는 정수 프레임 범위를 입력하세요. FPS는 추론되지 않아요.",
|
|
605
610
|
"Breeze": "산들바람",
|
|
606
611
|
"Bridges": "브리지",
|
|
607
|
-
"Browser preference fields were refused because their stamps conflict: {0}. Known values remain usable; an explicit edit repairs them.": "스탬프 충돌로 인해 브라우저 환경설정 필드가
|
|
608
|
-
"Browser preference update was refused: {0}.": "브라우저 환경설정 업데이트가
|
|
609
|
-
"Browser preferences are current.": "브라우저 환경설정이 최신
|
|
610
|
-
"Browser preferences saved.": "브라우저 환경설정이
|
|
611
|
-
"Browser preferences use defaults.": "브라우저 환경설정이 기본값을
|
|
612
|
-
"Browser preferences were cleared; defaults remain usable.": "브라우저 환경설정이 초기화되었으며 기본값을 계속 사용할 수
|
|
613
|
-
"Browser storage access was denied; preferences remain usable in this page.": "브라우저 저장소 접근이
|
|
614
|
-
"Browser storage is unavailable; preferences remain usable in this page.": "브라우저 저장소를 사용할 수
|
|
615
|
-
"Browser storage read was denied; preferences remain usable in this page.": "브라우저 저장소 읽기가
|
|
616
|
-
"Browser storage write was denied; changed preferences remain usable in this page.": "브라우저 저장소 쓰기가
|
|
612
|
+
"Browser preference fields were refused because their stamps conflict: {0}. Known values remain usable; an explicit edit repairs them.": "스탬프 충돌로 인해 브라우저 환경설정 필드가 거부됐어요: {0}. 기존 값은 계속 사용할 수 있으며 명시적으로 수정하면 복구돼요.",
|
|
613
|
+
"Browser preference update was refused: {0}.": "브라우저 환경설정 업데이트가 거부됐어요: {0}.",
|
|
614
|
+
"Browser preferences are current.": "브라우저 환경설정이 최신 상태예요.",
|
|
615
|
+
"Browser preferences saved.": "브라우저 환경설정이 저장됐어요.",
|
|
616
|
+
"Browser preferences use defaults.": "브라우저 환경설정이 기본값을 사용해요.",
|
|
617
|
+
"Browser preferences were cleared; defaults remain usable.": "브라우저 환경설정이 초기화되었으며 기본값을 계속 사용할 수 있어요.",
|
|
618
|
+
"Browser storage access was denied; preferences remain usable in this page.": "브라우저 저장소 접근이 거부됐어요. 이 페이지 내에서는 환경설정을 계속 사용할 수 있어요.",
|
|
619
|
+
"Browser storage is unavailable; preferences remain usable in this page.": "브라우저 저장소를 사용할 수 없어요. 이 페이지 내에서는 환경설정을 계속 사용할 수 있어요.",
|
|
620
|
+
"Browser storage read was denied; preferences remain usable in this page.": "브라우저 저장소 읽기가 거부됐어요. 이 페이지 내에서는 환경설정을 계속 사용할 수 있어요.",
|
|
621
|
+
"Browser storage write was denied; changed preferences remain usable in this page.": "브라우저 저장소 쓰기가 거부됐어요. 변경된 환경설정은 이 페이지 내에서 계속 사용할 수 있어요.",
|
|
617
622
|
"Build A": "빌드 A",
|
|
618
623
|
"Build B": "빌드 B",
|
|
619
|
-
"Build side is unavailable in single review mode": "단일 리뷰 모드에서는 빌드 사이드를 사용할 수
|
|
624
|
+
"Build side is unavailable in single review mode": "단일 리뷰 모드에서는 빌드 사이드를 사용할 수 없어요",
|
|
620
625
|
"Build strip": "스트립 빌드",
|
|
621
626
|
"Build the next strip between {0} and {1}": "{0}와(과) {1} 사이의 다음 스트립 빌드",
|
|
622
627
|
"Build {0} — {1}": "빌드 {0} — {1}",
|
|
623
628
|
"Building a strip of {0} on {1} (Build {2}): {3}…": "{1}(빌드 {2})에서 {0} 스트립 빌드 중: {3}…",
|
|
624
629
|
"Building a strip of {0} on {1}: {2} — remesh, compile and remesh's own check per value…": "{1}에서 {0} 스트립 빌드 중: {2} — 값별 리메시, 컴파일 및 리메시 자체 검사…",
|
|
625
|
-
"Builds N values of the part's density field side by side, each as its own <code>replace /meshes/<part></code> patch through remesh (into its own scratch folder). Rows are labels only: Load puts a row on the stage as pending, and the Mesh panel's Apply applies it. Closing or replacing the strip removes its scratch.": "파츠 밀도 필드의 N개 값을 각각 독립된 스크래치 폴더에 <code>replace /meshes/<part></code> 패치로 remesh하여 나란히
|
|
626
|
-
"Builds N values of the part's density field side by side, each as its own <code>replace /meshes/<part></code> patch through remesh (into its own scratch folder). Rows are labels only: Load puts a row on the stage as pending, and the Mesh panel's Apply applies it. Closing or replacing the strip removes its scratch.": "파츠 밀도 필드의 N개 값을 각각 독립된 스크래치 폴더에 <code>replace /meshes/<part></code> 패치로 remesh하여 나란히
|
|
630
|
+
"Builds N values of the part's density field side by side, each as its own <code>replace /meshes/<part></code> patch through remesh (into its own scratch folder). Rows are labels only: Load puts a row on the stage as pending, and the Mesh panel's Apply applies it. Closing or replacing the strip removes its scratch.": "파츠 밀도 필드의 N개 값을 각각 독립된 스크래치 폴더에 <code>replace /meshes/<part></code> 패치로 remesh하여 나란히 빌드해요. 각 행은 라벨일 뿐이며, 불러오기(Load)는 해당 행을 대기 상태로 스테이지에 올리고 메시 패널의 적용(Apply)이 실제로 적용해요. 스트립을 닫거나 교체하면 해당 스크래치가 제거돼요.",
|
|
631
|
+
"Builds N values of the part's density field side by side, each as its own <code>replace /meshes/<part></code> patch through remesh (into its own scratch folder). Rows are labels only: Load puts a row on the stage as pending, and the Mesh panel's Apply applies it. Closing or replacing the strip removes its scratch.": "파츠 밀도 필드의 N개 값을 각각 독립된 스크래치 폴더에 <code>replace /meshes/<part></code> 패치로 remesh하여 나란히 빌드해요. 각 행은 라벨일 뿐이며, 불러오기(Load)는 해당 행을 대기 상태로 스테이지에 올리고 메시 패널의 적용(Apply)이 실제로 적용해요. 스트립을 닫거나 교체하면 해당 스크래치가 제거돼요.",
|
|
627
632
|
"CHECK FAIL": "검사 실패",
|
|
628
633
|
"CHECKPOINTS": "체크포인트",
|
|
629
634
|
"CHEST REGIONS · DETAIL": "가슴 영역 · 상세",
|
|
630
|
-
"CHEST_REGION_MAPPING_UNAVAILABLE: no compiled model drawn": "CHEST_REGION_MAPPING_UNAVAILABLE: 그려진 컴파일 모델이
|
|
635
|
+
"CHEST_REGION_MAPPING_UNAVAILABLE: no compiled model drawn": "CHEST_REGION_MAPPING_UNAVAILABLE: 그려진 컴파일 모델이 없어요",
|
|
631
636
|
"CHEST_REGION_MAPPING_UNAVAILABLE: {0}": "CHEST_REGION_MAPPING_UNAVAILABLE: {0}",
|
|
632
637
|
"CHEST_REGION_NOT_ELLIPSE: {0} (polygon, {1} points, below the {2} a fit needs)": "CHEST_REGION_NOT_ELLIPSE: {0} (다각형, 점 {1}개, 맞춤에 필요한 {2}개 미만)",
|
|
633
638
|
"CHEST_REGION_NOT_ELLIPSE: {0} (polygon, {1} points, max off-ellipse {2} px)": "CHEST_REGION_NOT_ELLIPSE: {0} (다각형, 점 {1}개, 타원에서 최대 {2}px 벗어남)",
|
|
@@ -640,59 +645,59 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
640
645
|
"CLOTH_FIELD_INVALID {0}: {1}": "CLOTH_FIELD_INVALID {0}: {1}",
|
|
641
646
|
"CLOTH_FIELD_UNKNOWN: {0}": "CLOTH_FIELD_UNKNOWN: {0}",
|
|
642
647
|
"CLOTH_KEYPOINTS_UNDECLARED: ": "CLOTH_KEYPOINTS_UNDECLARED: ",
|
|
643
|
-
"CLOTH_KEYPOINTS_UNDECLARED: a cloth recipe Apply runs rig-parts propose, which places the body bones from the figure's keypoints; without them the draft moves the body bones the config states — declare the keypoint file with rig-review open <dir> --config <path> --keypoints <file> or the review.json \"producer\" block's \"keypoints\"": "CLOTH_KEYPOINTS_UNDECLARED: 천(Cloth) 레시피 적용은 인물의 키포인트로부터 신체 본을 배치하는 rig-parts propose를
|
|
644
|
-
"CLOTH_NOTHING_PENDING: no pending ops": "CLOTH_NOTHING_PENDING: 보류 중인 작업이
|
|
648
|
+
"CLOTH_KEYPOINTS_UNDECLARED: a cloth recipe Apply runs rig-parts propose, which places the body bones from the figure's keypoints; without them the draft moves the body bones the config states — declare the keypoint file with rig-review open <dir> --config <path> --keypoints <file> or the review.json \"producer\" block's \"keypoints\"": "CLOTH_KEYPOINTS_UNDECLARED: 천(Cloth) 레시피 적용은 인물의 키포인트로부터 신체 본을 배치하는 rig-parts propose를 실행해요. 키포인트가 없으면 초안이 설정의 신체 본을 이동시키므로 rig-review open <dir> --config <path> --keypoints <file> 또는 review.json \"producer\" 블록의 \"keypoints\"로 키포인트 파일을 선언하세요",
|
|
649
|
+
"CLOTH_NOTHING_PENDING: no pending ops": "CLOTH_NOTHING_PENDING: 보류 중인 작업이 없어요",
|
|
645
650
|
"CLOTH_PATCH_MIXED: ": "CLOTH_PATCH_MIXED: ",
|
|
646
|
-
"CLOTH_PATCH_MIXED: a cloth recipe patch holds /cloth ops only; apply the other edits separately": "CLOTH_PATCH_MIXED: 천(Cloth) 레시피 패치는 /cloth 작업만 포함할 수
|
|
647
|
-
"CLOTH_UNAVAILABLE: no producer handoff": "CLOTH_UNAVAILABLE: 프로듀서 핸드오프가
|
|
651
|
+
"CLOTH_PATCH_MIXED: a cloth recipe patch holds /cloth ops only; apply the other edits separately": "CLOTH_PATCH_MIXED: 천(Cloth) 레시피 패치는 /cloth 작업만 포함할 수 있어요. 다른 편집은 별도로 적용하세요",
|
|
652
|
+
"CLOTH_UNAVAILABLE: no producer handoff": "CLOTH_UNAVAILABLE: 프로듀서 핸드오프가 없어요",
|
|
648
653
|
"COMMENT_APPLIED_BUILD_UNSUPPORTED: return to the inspected source before commenting on this applied scratch build": "COMMENT_APPLIED_BUILD_UNSUPPORTED: 적용된 임시 빌드에 코멘트를 남기려면 먼저 점검 중인 소스로 돌아가세요",
|
|
649
654
|
"COMMENT_BACKGROUND_UNAVAILABLE: unknown stage ellipse": "COMMENT_BACKGROUND_UNAVAILABLE: 알 수 없는 스테이지 타원",
|
|
650
655
|
"COMMENT_BACKGROUND_UNAVAILABLE: unsupported viewport background": "COMMENT_BACKGROUND_UNAVAILABLE: 지원되지 않는 뷰포트 배경",
|
|
651
|
-
"COMMENT_CAPTURE_UNAVAILABLE: Canvas2D cannot reproduce active RGB/dark tint": "COMMENT_CAPTURE_UNAVAILABLE: Canvas2D에서 활성 RGB/어두운 틴트를 재현할 수
|
|
656
|
+
"COMMENT_CAPTURE_UNAVAILABLE: Canvas2D cannot reproduce active RGB/dark tint": "COMMENT_CAPTURE_UNAVAILABLE: Canvas2D에서 활성 RGB/어두운 틴트를 재현할 수 없어요",
|
|
652
657
|
"COMMENT_CLIP_UNAVAILABLE: degenerate clipping polygon": "COMMENT_CLIP_UNAVAILABLE: 퇴화된 클리핑 다각형",
|
|
653
|
-
"COMMENT_CLOCK_UNAVAILABLE: {0}; a time-only comment has no frame interval for strip export": "COMMENT_CLOCK_UNAVAILABLE: {0}; 시간 전용 코멘트에는 스트립 내보내기를 위한 프레임 구간이
|
|
658
|
+
"COMMENT_CLOCK_UNAVAILABLE: {0}; a time-only comment has no frame interval for strip export": "COMMENT_CLOCK_UNAVAILABLE: {0}; 시간 전용 코멘트에는 스트립 내보내기를 위한 프레임 구간이 없어요",
|
|
654
659
|
"COMMENT_CONTEXT_MISMATCH: bookmark pose": "COMMENT_CONTEXT_MISMATCH: 북마크 포즈 불일치",
|
|
655
660
|
"COMMENT_CONTEXT_MISMATCH: camera space": "COMMENT_CONTEXT_MISMATCH: 카메라 공간 불일치",
|
|
656
|
-
"COMMENT_CONTEXT_MISMATCH: frame, time or animation differs": "COMMENT_CONTEXT_MISMATCH: 프레임, 시간 또는 애니메이션이
|
|
661
|
+
"COMMENT_CONTEXT_MISMATCH: frame, time or animation differs": "COMMENT_CONTEXT_MISMATCH: 프레임, 시간 또는 애니메이션이 달라요",
|
|
657
662
|
"COMMENT_CONTEXT_MISMATCH: saved pane camera": "COMMENT_CONTEXT_MISMATCH: 저장된 창 카메라 불일치",
|
|
658
663
|
"COMMENT_CONTEXT_MISMATCH: screen/world region projection": "COMMENT_CONTEXT_MISMATCH: 화면/월드 영역 투영 불일치",
|
|
659
664
|
"COMMENT_CONTEXT_MISMATCH: single viewport": "COMMENT_CONTEXT_MISMATCH: 단일 뷰포트 불일치",
|
|
660
665
|
"COMMENT_CONTEXT_MISMATCH: viewport side or reference binding": "COMMENT_CONTEXT_MISMATCH: 뷰포트 사이드 또는 레퍼런스 바인딩 불일치",
|
|
661
|
-
"COMMENT_CROP_UNAVAILABLE: this viewport has no rendered pixels": "COMMENT_CROP_UNAVAILABLE: 이 뷰포트에 렌더링된 픽셀이
|
|
662
|
-
"COMMENT_FRAME_UNAVAILABLE: producer frame differs from the inspected reference time": "COMMENT_FRAME_UNAVAILABLE: 프로듀서 프레임이 점검 중인 레퍼런스 시간과
|
|
666
|
+
"COMMENT_CROP_UNAVAILABLE: this viewport has no rendered pixels": "COMMENT_CROP_UNAVAILABLE: 이 뷰포트에 렌더링된 픽셀이 없어요",
|
|
667
|
+
"COMMENT_FRAME_UNAVAILABLE: producer frame differs from the inspected reference time": "COMMENT_FRAME_UNAVAILABLE: 프로듀서 프레임이 점검 중인 레퍼런스 시간과 달라요",
|
|
663
668
|
"COMMENT_INVALID: ": "COMMENT_INVALID: ",
|
|
664
|
-
"COMMENT_MODE_MISMATCH: placement mode differs from page, viewport or saved inspector": "COMMENT_MODE_MISMATCH: 배치 모드가 페이지, 뷰포트 또는 저장된 인스펙터와
|
|
665
|
-
"COMMENT_MODE_MISSING: placement mode is required": "COMMENT_MODE_MISSING: 배치 모드가
|
|
666
|
-
"COMMENT_MODE_UNKNOWN: expected setup, animate or compare": "COMMENT_MODE_UNKNOWN: setup, animate 또는 compare여야
|
|
667
|
-
"COMMENT_REFERENCE_MISMATCH: selected reference ID/hash must match the source and bookmark": "COMMENT_REFERENCE_MISMATCH: 선택된 레퍼런스 ID/해시가 소스 및 북마크와 일치해야
|
|
668
|
-
"COMMENT_REFERENCE_MISMATCH: single rig marks have no reference viewport binding": "COMMENT_REFERENCE_MISMATCH: 단일 리그 표시에는 레퍼런스 뷰포트 바인딩이
|
|
669
|
-
"COMMENT_REFERENCE_STRIP_UNAVAILABLE: decoded reference frames are not producer frames; reference-basis comments cannot be exported as producer-frame strips": "COMMENT_REFERENCE_STRIP_UNAVAILABLE: 디코딩된 레퍼런스 프레임은 프로듀서 프레임이 아니므로 레퍼런스 기준 코멘트는 프로듀서 프레임 스트립으로 내보낼 수
|
|
670
|
-
"COMMENT_SLOT_UNKNOWN: drawn slot not in this model": "COMMENT_SLOT_UNKNOWN: 그려진 슬롯이 이 모델에
|
|
669
|
+
"COMMENT_MODE_MISMATCH: placement mode differs from page, viewport or saved inspector": "COMMENT_MODE_MISMATCH: 배치 모드가 페이지, 뷰포트 또는 저장된 인스펙터와 달라요",
|
|
670
|
+
"COMMENT_MODE_MISSING: placement mode is required": "COMMENT_MODE_MISSING: 배치 모드가 필요해요",
|
|
671
|
+
"COMMENT_MODE_UNKNOWN: expected setup, animate or compare": "COMMENT_MODE_UNKNOWN: setup, animate 또는 compare여야 해요",
|
|
672
|
+
"COMMENT_REFERENCE_MISMATCH: selected reference ID/hash must match the source and bookmark": "COMMENT_REFERENCE_MISMATCH: 선택된 레퍼런스 ID/해시가 소스 및 북마크와 일치해야 해요",
|
|
673
|
+
"COMMENT_REFERENCE_MISMATCH: single rig marks have no reference viewport binding": "COMMENT_REFERENCE_MISMATCH: 단일 리그 표시에는 레퍼런스 뷰포트 바인딩이 없어요",
|
|
674
|
+
"COMMENT_REFERENCE_STRIP_UNAVAILABLE: decoded reference frames are not producer frames; reference-basis comments cannot be exported as producer-frame strips": "COMMENT_REFERENCE_STRIP_UNAVAILABLE: 디코딩된 레퍼런스 프레임은 프로듀서 프레임이 아니므로 레퍼런스 기준 코멘트는 프로듀서 프레임 스트립으로 내보낼 수 없어요",
|
|
675
|
+
"COMMENT_SLOT_UNKNOWN: drawn slot not in this model": "COMMENT_SLOT_UNKNOWN: 그려진 슬롯이 이 모델에 없어요",
|
|
671
676
|
"COMMENT_SOURCE_BUSY: wait for the rebuild or candidate model replacement before commenting": "COMMENT_SOURCE_BUSY: 코멘트를 남기기 전에 리빌드 또는 후보 모델 교체가 완료될 때까지 기다리세요",
|
|
672
|
-
"COMMENT_SOURCE_CHANGED: comment differs from inspected source": "COMMENT_SOURCE_CHANGED: 코멘트가 점검 중인 소스와
|
|
677
|
+
"COMMENT_SOURCE_CHANGED: comment differs from inspected source": "COMMENT_SOURCE_CHANGED: 코멘트가 점검 중인 소스와 달라요",
|
|
673
678
|
"COMMENT_TARGET_MISMATCH: use topmost drawn slot or rig": "COMMENT_TARGET_MISMATCH: 가장 위에 그려진 슬롯 또는 리그를 사용하세요",
|
|
674
|
-
"COMMENT_TIME_ONLY_INVALID: explicit producer frame exists at this time": "COMMENT_TIME_ONLY_INVALID: 이 시간에 명시적 프로듀서 프레임이
|
|
675
|
-
"COMMENT_TIME_ONLY_INVALID: null frames require a validated time-only single comment and null interval": "COMMENT_TIME_ONLY_INVALID: null 프레임에는 검증된 시간 전용 단일 코멘트와 null 구간이
|
|
676
|
-
"COMMENT_TIME_ONLY_INVALID: seconds outside inspected animation": "COMMENT_TIME_ONLY_INVALID: 초 값이 점검 중인 애니메이션 범위를
|
|
677
|
-
"COMMENT_TIME_ONLY_INVALID: seconds-only single comment requires null frame and interval": "COMMENT_TIME_ONLY_INVALID: 초 전용 단일 코멘트에는 null 프레임과 구간이
|
|
678
|
-
"COMMENT_UNAPPLIED_PREVIEW: {0} is active; leave or disable that preview before commenting (nothing is cleared or applied automatically)": "COMMENT_UNAPPLIED_PREVIEW: {0} 미리보기가 활성화되어
|
|
679
|
+
"COMMENT_TIME_ONLY_INVALID: explicit producer frame exists at this time": "COMMENT_TIME_ONLY_INVALID: 이 시간에 명시적 프로듀서 프레임이 존재해요",
|
|
680
|
+
"COMMENT_TIME_ONLY_INVALID: null frames require a validated time-only single comment and null interval": "COMMENT_TIME_ONLY_INVALID: null 프레임에는 검증된 시간 전용 단일 코멘트와 null 구간이 필요해요",
|
|
681
|
+
"COMMENT_TIME_ONLY_INVALID: seconds outside inspected animation": "COMMENT_TIME_ONLY_INVALID: 초 값이 점검 중인 애니메이션 범위를 벗어났어요",
|
|
682
|
+
"COMMENT_TIME_ONLY_INVALID: seconds-only single comment requires null frame and interval": "COMMENT_TIME_ONLY_INVALID: 초 전용 단일 코멘트에는 null 프레임과 구간이 필요해요",
|
|
683
|
+
"COMMENT_UNAPPLIED_PREVIEW: {0} is active; leave or disable that preview before commenting (nothing is cleared or applied automatically)": "COMMENT_UNAPPLIED_PREVIEW: {0} 미리보기가 활성화되어 있어요. 코멘트를 남기기 전에 해당 미리보기를 종료하거나 비활성화하세요 (자동으로 초기화되거나 적용되지 않음)",
|
|
679
684
|
"COMPARE": "비교",
|
|
680
685
|
"COMPARE --LEFT <HANDOFF CONFIG> --RIGHT <PATCHED>": "COMPARE --LEFT <핸드오프 설정> --RIGHT <패치됨>",
|
|
681
686
|
"COMPARE REVIEW": "비교 리뷰",
|
|
682
|
-
"CONFIG_BUST_CLEARANCE: contour.bust.clearance — is {0} (giving R_r = {1}, R_l = {2}, R_r + R_l = {3} px against apex distance D = {4} px, r_r = {5}, band_r = {6}, r_l = {7}, band_l = {8}); a clearance > 0 with R_r + R_l < D (clearance > {9} px) and positive radii is required": "CONFIG_BUST_CLEARANCE: contour.bust.clearance — 현재 {0} (정점 거리 D = {4} px 대비 R_r = {1}, R_l = {2}, R_r + R_l = {3} px, r_r = {5}, band_r = {6}, r_l = {7}, band_l = {8}); R_r + R_l < D를 만족하는 0보다 큰 간격(clearance > {9} px)과 양수 반지름이
|
|
683
|
-
"CONFIG_FIELD_TYPE: config.meshes.{0} — is not an object": "CONFIG_FIELD_TYPE: config.meshes.{0} — 객체가
|
|
684
|
-
"CONFIG_FIELD_TYPE: {0} — an object is required": "CONFIG_FIELD_TYPE: {0} — 객체가
|
|
685
|
-
"CONFIG_FIELD_TYPE: {0} — is not an object": "CONFIG_FIELD_TYPE: {0} — 객체가
|
|
686
|
-
"CONFIG_MESH_MODE: config.meshes.{0} — {1}; exactly one of grid, contour, auto and influence is required": "CONFIG_MESH_MODE: config.meshes.{0} — {1}; grid, contour, auto, influence 중 정확히 하나가
|
|
687
|
-
"CONFIG_NAME_RESOLVES: stops[{0}] names no link of {1}": "CONFIG_NAME_RESOLVES: stops[{0}]이(가) {1}의 링크를 가리키지
|
|
688
|
-
"CONFIG_NAME_RESOLVES: stops[{0}].against {1} has no origin and direction in bones": "CONFIG_NAME_RESOLVES: stops[{0}].against {1}에 본 원점 및 방향이
|
|
689
|
-
"CONFIG_NAME_RESOLVES: stops[{0}].chain {1} is not a chain bones declares": "CONFIG_NAME_RESOLVES: stops[{0}].chain {1}은(는) bones에 선언된 체인이
|
|
690
|
-
"CONSTRAINT_MIX_READONLY: @rig-c/play exposes no per-constraint mix": "CONSTRAINT_MIX_READONLY: @rig-c/play는 제약 조건별 믹스를 노출하지
|
|
687
|
+
"CONFIG_BUST_CLEARANCE: contour.bust.clearance — is {0} (giving R_r = {1}, R_l = {2}, R_r + R_l = {3} px against apex distance D = {4} px, r_r = {5}, band_r = {6}, r_l = {7}, band_l = {8}); a clearance > 0 with R_r + R_l < D (clearance > {9} px) and positive radii is required": "CONFIG_BUST_CLEARANCE: contour.bust.clearance — 현재 {0} (정점 거리 D = {4} px 대비 R_r = {1}, R_l = {2}, R_r + R_l = {3} px, r_r = {5}, band_r = {6}, r_l = {7}, band_l = {8}); R_r + R_l < D를 만족하는 0보다 큰 간격(clearance > {9} px)과 양수 반지름이 필요해요",
|
|
688
|
+
"CONFIG_FIELD_TYPE: config.meshes.{0} — is not an object": "CONFIG_FIELD_TYPE: config.meshes.{0} — 객체가 아니에요",
|
|
689
|
+
"CONFIG_FIELD_TYPE: {0} — an object is required": "CONFIG_FIELD_TYPE: {0} — 객체가 필요해요",
|
|
690
|
+
"CONFIG_FIELD_TYPE: {0} — is not an object": "CONFIG_FIELD_TYPE: {0} — 객체가 아니에요",
|
|
691
|
+
"CONFIG_MESH_MODE: config.meshes.{0} — {1}; exactly one of grid, contour, auto and influence is required": "CONFIG_MESH_MODE: config.meshes.{0} — {1}; grid, contour, auto, influence 중 정확히 하나가 필요해요",
|
|
692
|
+
"CONFIG_NAME_RESOLVES: stops[{0}] names no link of {1}": "CONFIG_NAME_RESOLVES: stops[{0}]이(가) {1}의 링크를 가리키지 않아요",
|
|
693
|
+
"CONFIG_NAME_RESOLVES: stops[{0}].against {1} has no origin and direction in bones": "CONFIG_NAME_RESOLVES: stops[{0}].against {1}에 본 원점 및 방향이 없어요",
|
|
694
|
+
"CONFIG_NAME_RESOLVES: stops[{0}].chain {1} is not a chain bones declares": "CONFIG_NAME_RESOLVES: stops[{0}].chain {1}은(는) bones에 선언된 체인이 아니에요",
|
|
695
|
+
"CONSTRAINT_MIX_READONLY: @rig-c/play exposes no per-constraint mix": "CONSTRAINT_MIX_READONLY: @rig-c/play는 제약 조건별 믹스를 노출하지 않아요",
|
|
691
696
|
"CONTROL_BUSY: inspection update in progress": "CONTROL_BUSY: 점검 업데이트 진행 중",
|
|
692
|
-
"CONTROL_CAMERA_MODE: single review has no A/B panes": "CONTROL_CAMERA_MODE: 단일 리뷰에는 A/B 창이
|
|
697
|
+
"CONTROL_CAMERA_MODE: single review has no A/B panes": "CONTROL_CAMERA_MODE: 단일 리뷰에는 A/B 창이 없어요",
|
|
693
698
|
"CONTROL_DRAFT_BUSY: preserve review draft": "CONTROL_DRAFT_BUSY: 리뷰 초안 보존 중",
|
|
694
|
-
"CONTROL_NOT_READY: inspection is not settled": "CONTROL_NOT_READY: 점검이 아직 안정화되지
|
|
695
|
-
"CONTROL_REBIND_REQUIRED: comparison animation is source-bound": "CONTROL_REBIND_REQUIRED: 비교 애니메이션이 소스에 바인딩되어
|
|
699
|
+
"CONTROL_NOT_READY: inspection is not settled": "CONTROL_NOT_READY: 점검이 아직 안정화되지 않았어요",
|
|
700
|
+
"CONTROL_REBIND_REQUIRED: comparison animation is source-bound": "CONTROL_REBIND_REQUIRED: 비교 애니메이션이 소스에 바인딩되어 있어요",
|
|
696
701
|
"CONTROL_SUPERSEDED: local interaction": "CONTROL_SUPERSEDED: 로컬 상호작용으로 대체됨",
|
|
697
702
|
"CONTROL_UNAVAILABLE: animation": "CONTROL_UNAVAILABLE: 애니메이션",
|
|
698
703
|
"CONTROL_UNAVAILABLE: camera sync": "CONTROL_UNAVAILABLE: 카메라 동기화",
|
|
@@ -702,16 +707,16 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
702
707
|
"CONTROL_UNAVAILABLE: {0} camera": "CONTROL_UNAVAILABLE: {0} 카메라",
|
|
703
708
|
"CONTROL_UNSUBMITTED_CHANGES: preserve the current feedback draft": "CONTROL_UNSUBMITTED_CHANGES: 현재 피드백 초안 보존",
|
|
704
709
|
"CUTS · PATCHES · LIMBS · APPLY RUNS RIG-PARTS BUILD": "컷 · 패치 · 림 · 적용 시 RIG-PARTS BUILD 실행",
|
|
705
|
-
"CUTS_ADD_INCOMPLETE: a new part needs a name and the bone its region rides": "CUTS_ADD_INCOMPLETE: 새 파츠에는 이름과 해당 영역이 따르는 본이
|
|
706
|
-
"CUTS_NOTHING_PENDING: no pending ops": "CUTS_NOTHING_PENDING: 보류 중인 작업이
|
|
707
|
-
"CUTS_UNAVAILABLE: no producer handoff": "CUTS_UNAVAILABLE: 프로듀서 핸드오프가
|
|
710
|
+
"CUTS_ADD_INCOMPLETE: a new part needs a name and the bone its region rides": "CUTS_ADD_INCOMPLETE: 새 파츠에는 이름과 해당 영역이 따르는 본이 필요해요",
|
|
711
|
+
"CUTS_NOTHING_PENDING: no pending ops": "CUTS_NOTHING_PENDING: 보류 중인 작업이 없어요",
|
|
712
|
+
"CUTS_UNAVAILABLE: no producer handoff": "CUTS_UNAVAILABLE: 프로듀서 핸드오프가 없어요",
|
|
708
713
|
"CUTS_UNKNOWN: assemble.cuts[{0}]": "CUTS_UNKNOWN: assemble.cuts[{0}]",
|
|
709
714
|
"CUTS_UNKNOWN: assemble.patches[{0}]": "CUTS_UNKNOWN: assemble.patches[{0}]",
|
|
710
715
|
"CUTS_UNKNOWN: limbs.{0}.segments[{1}]": "CUTS_UNKNOWN: limbs.{0}.segments[{1}]",
|
|
711
|
-
"CUTS_VALUE_INVALID: {0} must be a number": "CUTS_VALUE_INVALID: {0}은(는) 숫자여야
|
|
716
|
+
"CUTS_VALUE_INVALID: {0} must be a number": "CUTS_VALUE_INVALID: {0}은(는) 숫자여야 해요",
|
|
712
717
|
"Cached canvas frame reused": "캐시된 캔버스 프레임 재사용됨",
|
|
713
718
|
"Cached mesh rasters reused": "캐시된 메시 래스터 재사용됨",
|
|
714
|
-
"Camera signature requires finite pan and zoom 0.25..8": "카메라 시그니처에는 유한한 팬과 0.25..8 배율이
|
|
719
|
+
"Camera signature requires finite pan and zoom 0.25..8": "카메라 시그니처에는 유한한 팬과 0.25..8 배율이 필요해요",
|
|
715
720
|
"Cameras synchronized · drag to pan · scroll to zoom": "카메라 동기화됨 · 드래그하여 이동 · 스크롤하여 확대/축소",
|
|
716
721
|
"Cancel": "취소",
|
|
717
722
|
"Cancel idle restart and pause comparison": "아이들 재시작을 취소하고 비교 일시정지",
|
|
@@ -725,7 +730,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
725
730
|
"Chain amplitude handles": "체인 진폭 핸들",
|
|
726
731
|
"Chain for a new chain track": "새 체인 트랙의 체인",
|
|
727
732
|
"Changes requested": "변경 요청됨",
|
|
728
|
-
"Changes were made during submission. Submit again.": "제출 중 변경사항이
|
|
733
|
+
"Changes were made during submission. Submit again.": "제출 중 변경사항이 발생했어요. 다시 제출하세요.",
|
|
729
734
|
"Channel": "채널",
|
|
730
735
|
"Check": "검사",
|
|
731
736
|
"Check on ": "검사 대상 ",
|
|
@@ -741,7 +746,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
741
746
|
"Checking {0} op(s): propose --from-config and compare on a scratch copy of the patched config…": "작업 {0}개 검사 중: 패치된 설정의 임시 복사본에서 propose --from-config 및 compare 실행…",
|
|
742
747
|
"Checking…": "검사 중…",
|
|
743
748
|
"Checkpoint": "체크포인트",
|
|
744
|
-
"Checkpoint \"{0}\" is not in this package. Select one from the list.": "체크포인트 \"{0}\"이(가) 이 패키지에
|
|
749
|
+
"Checkpoint \"{0}\" is not in this package. Select one from the list.": "체크포인트 \"{0}\"이(가) 이 패키지에 없어요. 목록에서 선택하세요.",
|
|
745
750
|
"Checkpoint outcome": "체크포인트 결과",
|
|
746
751
|
"Checkpoints": "체크포인트",
|
|
747
752
|
"Chest": "가슴",
|
|
@@ -757,7 +762,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
757
762
|
"Choose an integer frame inside the explicit producer clock.": "명시적 프로듀서 클록 범위 내의 정수 프레임을 선택하세요.",
|
|
758
763
|
"Choose or enter an exact name from this rig: {0} targets.": "이 리그에서 정확한 이름을 선택하거나 입력하세요: 대상 {0}개.",
|
|
759
764
|
"Choose or enter an exact name from {0}: {1} rig targets.": "{0}에서 정확한 이름을 선택하거나 입력하세요: 리그 대상 {1}개.",
|
|
760
|
-
"Choose the entered start–end frames or all feedback ranges to download. Unsubmitted feedback is included; exporting does not submit the review.": "다운로드할 시작–종료 프레임 범위 또는 전체 피드백 범위를 선택하세요. 제출되지 않은 피드백도 포함되며, 내보내기는 리뷰를 제출하지
|
|
765
|
+
"Choose the entered start–end frames or all feedback ranges to download. Unsubmitted feedback is included; exporting does not submit the review.": "다운로드할 시작–종료 프레임 범위 또는 전체 피드백 범위를 선택하세요. 제출되지 않은 피드백도 포함되며, 내보내기는 리뷰를 제출하지 않아요.",
|
|
761
766
|
"Circles": "원(서클)",
|
|
762
767
|
"Clear preview": "미리보기 지우기",
|
|
763
768
|
"Clearance": "간격(클리어런스)",
|
|
@@ -774,7 +779,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
774
779
|
"Click the part to place the cleavage; drag its marker to move it": "파츠를 클릭하여 클리비지를 배치하고 마커를 드래그하여 이동하세요",
|
|
775
780
|
"Click the part to place {0}{1} · drag a marker to move it": "파츠를 클릭하여 {0}{1} 배치 · 마커를 드래그하여 이동",
|
|
776
781
|
"Click the polygon's points on the stage (rig px, whole numbers), then Finish.": "스테이지에서 다각형의 점들을 클릭한 뒤(리그 px, 정수) 완료를 누르세요.",
|
|
777
|
-
"Click the stage to place polygon points; press Draw polygon again (or Enter) to close it (3 or more points), Escape to drop it.": "스테이지를 클릭하여 다각형 점을 배치하세요. 다각형 그리기를 다시 누르거나(또는 Enter) 닫고(점 3개 이상), Escape로
|
|
782
|
+
"Click the stage to place polygon points; press Draw polygon again (or Enter) to close it (3 or more points), Escape to drop it.": "스테이지를 클릭하여 다각형 점을 배치하세요. 다각형 그리기를 다시 누르거나(또는 Enter) 닫고(점 3개 이상), Escape로 취소해요.",
|
|
778
783
|
"Close": "닫기",
|
|
779
784
|
"Close ": "닫기: ",
|
|
780
785
|
"Close Inspector": "인스펙터 닫기",
|
|
@@ -789,11 +794,11 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
789
794
|
"Cloth {0}": "천(Cloth) {0}",
|
|
790
795
|
"Colour by": "색상 기준",
|
|
791
796
|
"Compare": "비교",
|
|
792
|
-
"Compare mode is unavailable without a second build": "두 번째 빌드가 없으면 비교 모드를 사용할 수
|
|
793
|
-
"Comparison and submission session refer to different source identities. Reopen the review.": "비교와 제출 세션이 서로 다른 소스 식별 정보를
|
|
794
|
-
"Comparison inputs changed. Restart compare to bind feedback to current inputs. {0}": "비교 입력이
|
|
795
|
-
"Comparison is not ready": "비교가 준비되지
|
|
796
|
-
"Comparison playback is unavailable": "비교 재생을 사용할 수
|
|
797
|
+
"Compare mode is unavailable without a second build": "두 번째 빌드가 없으면 비교 모드를 사용할 수 없어요",
|
|
798
|
+
"Comparison and submission session refer to different source identities. Reopen the review.": "비교와 제출 세션이 서로 다른 소스 식별 정보를 참조해요. 리뷰를 다시 여세요.",
|
|
799
|
+
"Comparison inputs changed. Restart compare to bind feedback to current inputs. {0}": "비교 입력이 변경됐어요. 현재 입력에 피드백을 바인딩하려면 비교를 재시작하세요. {0}",
|
|
800
|
+
"Comparison is not ready": "비교가 준비되지 않았어요",
|
|
801
|
+
"Comparison playback is unavailable": "비교 재생을 사용할 수 없어요",
|
|
797
802
|
"Comparison stopped · no valid synchronized time": "비교 중지됨 · 유효한 동기화 시간 없음",
|
|
798
803
|
"Comparison stopped: {0}": "비교 중지됨: {0}",
|
|
799
804
|
"Comparison unavailable · no synchronized pair": "비교 사용 불가 · 동기화된 쌍 없음",
|
|
@@ -811,14 +816,14 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
811
816
|
"Could not open audio: {0}": "오디오를 열 수 없음: {0}",
|
|
812
817
|
"Could not open review package: {0}": "리뷰 패키지를 열 수 없음: {0}",
|
|
813
818
|
"Could not open rig: {0}": "리그를 열 수 없음: {0}",
|
|
814
|
-
"Could not open the reference. Check the package files.": "레퍼런스를 열 수
|
|
815
|
-
"Could not read reference video metadata / first frame.": "레퍼런스 비디오 메타데이터 / 첫 프레임을 읽을 수
|
|
819
|
+
"Could not open the reference. Check the package files.": "레퍼런스를 열 수 없어요. 패키지 파일을 확인하세요.",
|
|
820
|
+
"Could not read reference video metadata / first frame.": "레퍼런스 비디오 메타데이터 / 첫 프레임을 읽을 수 없어요.",
|
|
816
821
|
"Create": "생성",
|
|
817
822
|
"Create · key C": "생성 · 단축키 C",
|
|
818
|
-
"Create: that is a vertex already — click empty space or an edge": "생성: 이미
|
|
823
|
+
"Create: that is a vertex already — click empty space or an edge": "생성: 이미 정점이에요 — 빈 공간이나 엣지를 클릭하세요",
|
|
819
824
|
"Crop": "크롭",
|
|
820
825
|
"Crop height": "크롭 높이",
|
|
821
|
-
"Crop pixels, x screen-right and y down (<code>family-chest-regions/1</code>). Place the circles with <strong>Chest regions</strong> in the view bar; this block holds names, bones, semi-axes, clip and the contour. Equal semi-axes export as a circle, unequal ones (or a clip) as the generator's 32-sample polygon. Exporting writes nothing into the package and is not an approval.": "크롭 픽셀 기준이며 x는 화면 오른쪽, y는
|
|
826
|
+
"Crop pixels, x screen-right and y down (<code>family-chest-regions/1</code>). Place the circles with <strong>Chest regions</strong> in the view bar; this block holds names, bones, semi-axes, clip and the contour. Equal semi-axes export as a circle, unequal ones (or a clip) as the generator's 32-sample polygon. Exporting writes nothing into the package and is not an approval.": "크롭 픽셀 기준이며 x는 화면 오른쪽, y는 아래쪽이에요(<code>family-chest-regions/1</code>). 뷰 바의 <strong>가슴 영역</strong>으로 원을 배치하세요. 이 블록은 이름, 본, 반축, 클립 및 윤곽을 담아요. 반축이 같으면 원으로, 다르거나 클립이 있으면 생성기의 32샘플 다각형으로 내보내요. 내보내기는 패키지에 아무것도 기록하지 않으며 승인이 아니에요.",
|
|
822
827
|
"Crop width": "크롭 너비",
|
|
823
828
|
"Crop → rig world from the model: {0}.": "모델의 크롭 → 리그 월드 매핑: {0}.",
|
|
824
829
|
"Cubic Bézier (handles)": "3차 베지어 (핸들)",
|
|
@@ -835,20 +840,20 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
835
840
|
"DENSITY_STRIP_BACK_FAILED: {0}": "DENSITY_STRIP_BACK_FAILED: {0}",
|
|
836
841
|
"DENSITY_STRIP_BODY_LIMIT: maximum 1 KiB": "DENSITY_STRIP_BODY_LIMIT: 최대 1 KiB",
|
|
837
842
|
"DENSITY_STRIP_BODY_LIMIT: maximum 320 KiB": "DENSITY_STRIP_BODY_LIMIT: 최대 320 KiB",
|
|
838
|
-
"DENSITY_STRIP_BUSY: a strip is still building": "DENSITY_STRIP_BUSY: 스트립이 아직 빌드
|
|
839
|
-
"DENSITY_STRIP_BUSY: strip {0} is still running; close it when its candidates settle": "DENSITY_STRIP_BUSY: 스트립 {0}이(가) 아직 실행
|
|
840
|
-
"DENSITY_STRIP_INPUT_CHECK_MISSING: the producer succeeded without an available regular input-check.json; no unrecorded retry was run": "DENSITY_STRIP_INPUT_CHECK_MISSING: 사용 가능한 일반 input-check.json 없이 프로듀서가
|
|
843
|
+
"DENSITY_STRIP_BUSY: a strip is still building": "DENSITY_STRIP_BUSY: 스트립이 아직 빌드 중이에요",
|
|
844
|
+
"DENSITY_STRIP_BUSY: strip {0} is still running; close it when its candidates settle": "DENSITY_STRIP_BUSY: 스트립 {0}이(가) 아직 실행 중이에요. 후보가 완료되면 닫으세요",
|
|
845
|
+
"DENSITY_STRIP_INPUT_CHECK_MISSING: the producer succeeded without an available regular input-check.json; no unrecorded retry was run": "DENSITY_STRIP_INPUT_CHECK_MISSING: 사용 가능한 일반 input-check.json 없이 프로듀서가 종료됐어요. 기록되지 않은 재시도는 실행하지 않았어요",
|
|
841
846
|
"DENSITY_STRIP_LOAD_FAILED: {0}": "DENSITY_STRIP_LOAD_FAILED: {0}",
|
|
842
847
|
"DENSITY_STRIP_ROW_NOT_LOADABLE: {0} — {1}": "DENSITY_STRIP_ROW_NOT_LOADABLE: {0} — {1}",
|
|
843
|
-
"DOM images for rigid parts; WebGL meshes when available, Canvas2D fallback.": "리지드 파츠는 DOM 이미지, 가능한 경우 WebGL 메시(불가 시 Canvas2D 폴백)를
|
|
844
|
-
"DOMAIN_PENDING: shared domain not established": "DOMAIN_PENDING: 공유 도메인이 설정되지
|
|
845
|
-
"DOMAIN_REFUSED: shared end is not finite": "DOMAIN_REFUSED: 공유 종료 시간이 유한하지
|
|
848
|
+
"DOM images for rigid parts; WebGL meshes when available, Canvas2D fallback.": "리지드 파츠는 DOM 이미지, 가능한 경우 WebGL 메시(불가 시 Canvas2D 폴백)를 사용해요.",
|
|
849
|
+
"DOMAIN_PENDING: shared domain not established": "DOMAIN_PENDING: 공유 도메인이 설정되지 않았어요",
|
|
850
|
+
"DOMAIN_REFUSED: shared end is not finite": "DOMAIN_REFUSED: 공유 종료 시간이 유한하지 않아요",
|
|
846
851
|
"DOMAIN_REFUSED: {0}": "DOMAIN_REFUSED: {0}",
|
|
847
852
|
"Dark": "다크",
|
|
848
|
-
"Declare what the scene asks of the motion: a slot (picked on the stage), its mesh or a bone, an animation and a kind, with your own bar. Check writes a <code>spine-parts-requirements/1</code> file into scratch and runs the installed producer's <code>rig-parts check --requirements</code> on the inspected rig or the latest scratch build; each requirement gets one line with its worst frame (click to seek). A refusal is the producer's, by name. Waivers (<code>may_fold</code>), scene targets and the part exception lists are not written here. Submitted feedback carries the file by hash and content.": "장면이 모션에 요구하는 조건(스테이지에서 선택한 슬롯, 해당 메시 또는 본, 애니메이션, 종류 및 기준치)을
|
|
849
|
-
"Defaults apply to new inspections. Links and source drafts retain their explicit view.": "기본값은 새 검사에
|
|
853
|
+
"Declare what the scene asks of the motion: a slot (picked on the stage), its mesh or a bone, an animation and a kind, with your own bar. Check writes a <code>spine-parts-requirements/1</code> file into scratch and runs the installed producer's <code>rig-parts check --requirements</code> on the inspected rig or the latest scratch build; each requirement gets one line with its worst frame (click to seek). A refusal is the producer's, by name. Waivers (<code>may_fold</code>), scene targets and the part exception lists are not written here. Submitted feedback carries the file by hash and content.": "장면이 모션에 요구하는 조건(스테이지에서 선택한 슬롯, 해당 메시 또는 본, 애니메이션, 종류 및 기준치)을 선언해요. 점검(Check)은 스크래치에 <code>spine-parts-requirements/1</code> 파일을 작성하고 검사 대상 리그 또는 최신 스크래치 빌드에 대해 설치된 프로듀서의 <code>rig-parts check --requirements</code>를 실행해요. 각 요구사항마다 최악 프레임이 포함된 한 줄이 표시돼요(클릭하여 이동). 거부는 프로듀서의 코드명으로 표시돼요. 면제(<code>may_fold</code>), 장면 타깃 및 파츠 예외 목록은 여기서 작성하지 않아요. 제출된 피드백은 이 파일의 해시와 내용을 함께 전달해요.",
|
|
854
|
+
"Defaults apply to new inspections. Links and source drafts retain their explicit view.": "기본값은 새 검사에 적용돼요. 링크와 소스 초안은 명시된 뷰를 유지해요.",
|
|
850
855
|
"Defect": "결함",
|
|
851
|
-
"Degrees around the rest aim from the first stopped link's origin; pick a stop to drag its arc ends on the stage.": "첫 번째 제한된 링크의 원점에서 기본 조준 방향 기준 각도(°)
|
|
856
|
+
"Degrees around the rest aim from the first stopped link's origin; pick a stop to drag its arc ends on the stage.": "첫 번째 제한된 링크의 원점에서 기본 조준 방향 기준 각도(°)예요. 스톱을 선택하여 스테이지에서 호의 끝을 드래그하세요.",
|
|
852
857
|
"Delete": "삭제",
|
|
853
858
|
"Delete feedback with validation warnings, then add it again with a valid target.": "유효성 경고가 있는 피드백을 삭제한 뒤 유효한 대상으로 다시 추가하세요.",
|
|
854
859
|
"Delete key": "키 삭제",
|
|
@@ -857,22 +862,22 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
857
862
|
"Deleted {0} selected key(s) ({1} pending op(s)).": "선택한 키 {0}개 삭제됨 (보류 중인 작업 {1}개).",
|
|
858
863
|
"Density strip candidate": "밀도 스트립 후보",
|
|
859
864
|
"Describe the part, conditions and what looks wrong.": "파츠, 조건 및 무엇이 잘못되었는지 설명하세요.",
|
|
860
|
-
"Designation is review evidence, not an approval. Nothing was written into the package; regeneration is the producer path.": "지정 데이터는 리뷰 근거 자료이며 승인이
|
|
865
|
+
"Designation is review evidence, not an approval. Nothing was written into the package; regeneration is the producer path.": "지정 데이터는 리뷰 근거 자료이며 승인이 아니에요. 패키지에는 아무것도 기록되지 않았으며 재생성은 프로듀서 경로에서 수행해요.",
|
|
861
866
|
"Dial back to 0": "다이얼 0으로 복귀",
|
|
862
867
|
"Discard conflicting local draft": "충돌하는 로컬 초안 폐기",
|
|
863
868
|
"Discard pending": "대기 변경 버리기",
|
|
864
869
|
"Discard unusable local draft": "사용할 수 없는 로컬 초안 폐기",
|
|
865
|
-
"Discarded unapplied animation edits.": "적용되지 않은 애니메이션 편집을
|
|
870
|
+
"Discarded unapplied animation edits.": "적용되지 않은 애니메이션 편집을 폐기했어요.",
|
|
866
871
|
"Download JSON": "JSON 다운로드",
|
|
867
872
|
"Download chest-regions.json": "chest-regions.json 다운로드",
|
|
868
873
|
"Download chest-regions.json and its binding; evidence, not an approval": "chest-regions.json 및 바인딩 다운로드 (승인이 아닌 근거 자료)",
|
|
869
874
|
"Download mesh-edit.json and its binding; evidence, not an approval": "mesh-edit.json 및 바인딩 다운로드 (승인이 아닌 근거 자료)",
|
|
870
875
|
"Download saved local draft": "저장된 로컬 초안 다운로드",
|
|
871
876
|
"Download strip": "스트립 다운로드",
|
|
872
|
-
"Downloaded chest-regions.json and chest-regions.binding.json for Build {0}.": "빌드 {0}의 chest-regions.json 및 chest-regions.binding.json을
|
|
873
|
-
"Downloaded chest-regions.json and chest-regions.binding.json. The regions are review evidence, not an approval; the package is unchanged.": "chest-regions.json 및 chest-regions.binding.json을
|
|
874
|
-
"Downloaded mesh-edit.json ({0} ops) and mesh-edit.binding.json for Build {1}.": "빌드 {1}의 mesh-edit.json(작업 {0}개) 및 mesh-edit.binding.json을
|
|
875
|
-
"Downloaded mesh-edit.json ({0} ops) and mesh-edit.binding.json. The delta is review evidence, not an approval; the package is unchanged and the producer retriangulates.": "mesh-edit.json(작업 {0}개) 및 mesh-edit.binding.json을
|
|
877
|
+
"Downloaded chest-regions.json and chest-regions.binding.json for Build {0}.": "빌드 {0}의 chest-regions.json 및 chest-regions.binding.json을 다운로드했어요.",
|
|
878
|
+
"Downloaded chest-regions.json and chest-regions.binding.json. The regions are review evidence, not an approval; the package is unchanged.": "chest-regions.json 및 chest-regions.binding.json을 다운로드했어요. 이 영역은 리뷰 근거 자료이며 승인이 아니에요. 패키지는 변경되지 않아요.",
|
|
879
|
+
"Downloaded mesh-edit.json ({0} ops) and mesh-edit.binding.json for Build {1}.": "빌드 {1}의 mesh-edit.json(작업 {0}개) 및 mesh-edit.binding.json을 다운로드했어요.",
|
|
880
|
+
"Downloaded mesh-edit.json ({0} ops) and mesh-edit.binding.json. The delta is review evidence, not an approval; the package is unchanged and the producer retriangulates.": "mesh-edit.json(작업 {0}개) 및 mesh-edit.binding.json을 다운로드했어요. 이 델타는 리뷰 근거 자료이며 승인이 아니에요. 패키지는 변경되지 않으며 프로듀서가 재삼각분할해요.",
|
|
876
881
|
"Draft UI value invalid": "초안 UI 값이 유효하지 않음",
|
|
877
882
|
"Draft binding/version differs": "초안 바인딩/버전이 다름",
|
|
878
883
|
"Draft exceeds 512 KiB": "초안이 512 KiB를 초과함",
|
|
@@ -881,7 +886,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
881
886
|
"Draft input key invalid": "초안 입력 키가 유효하지 않음",
|
|
882
887
|
"Draft review state invalid": "초안 리뷰 상태가 유효하지 않음",
|
|
883
888
|
"Draft timestamp invalid": "초안 타임스탬프가 유효하지 않음",
|
|
884
|
-
"Drafts save locally as you type · nothing is submitted until you press Submit": "입력하는 동안 초안이 로컬에 자동
|
|
889
|
+
"Drafts save locally as you type · nothing is submitted until you press Submit": "입력하는 동안 초안이 로컬에 자동 저장돼요 · 제출을 누르기 전에는 제출되지 않아요",
|
|
885
890
|
"Drag a centre to move · the right-edge handle sets r · the dashed top handle sets band · Space-drag pans": "중심을 드래그하여 이동 · 오른쪽 끝 핸들로 r 설정 · 위쪽 점선 핸들로 밴드 설정 · Space+드래그로 화면 이동",
|
|
886
891
|
"Drag a link's handle on the stage up or down to set its amp.": "스테이지에서 링크의 핸들을 위아래로 드래그하여 진폭(amp)을 설정하세요.",
|
|
887
892
|
"Drag a polygon vertex or a circle centre on the stage.": "스테이지에서 다각형 정점 또는 원의 중심을 드래그하세요.",
|
|
@@ -889,28 +894,28 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
889
894
|
"Drag bone handles on stage to translate (hold Alt during drag to rotate)": "스테이지에서 본 핸들을 드래그하여 이동 (드래그 중 Alt를 누르면 회전)",
|
|
890
895
|
"Drag on stage": "스테이지에서 드래그",
|
|
891
896
|
"Drag to pan · scroll to zoom · cameras synchronized": "드래그하여 이동 · 스크롤하여 확대/축소 · 카메라 동기화됨",
|
|
892
|
-
"Dragging the rig pane pans the camera and tells the physics the rig moved, so hair and cloth trail; a click that does not move still selects a part. Hold Space to pan only. Reset returns the runtime start values and re-poses from the current time, clearing the physics history.": "리그 창을 드래그하면 화면이 이동하면서 리그가 움직인 것으로 물리에 전달되어 머리카락과 옷이 뒤따라
|
|
897
|
+
"Dragging the rig pane pans the camera and tells the physics the rig moved, so hair and cloth trail; a click that does not move still selects a part. Hold Space to pan only. Reset returns the runtime start values and re-poses from the current time, clearing the physics history.": "리그 창을 드래그하면 화면이 이동하면서 리그가 움직인 것으로 물리에 전달되어 머리카락과 옷이 뒤따라 흔들려요. 움직이지 않은 클릭은 그대로 파트를 선택해요. Space를 누른 채 드래그하면 화면만 이동해요. 초기화는 런타임 시작 값으로 되돌리고 물리 히스토리를 지운 뒤 현재 시간부터 다시 포즈를 잡아요.",
|
|
893
898
|
"Draw polygon": "다각형 그리기",
|
|
894
|
-
"Draw the chest regions on the rig and edit them there; the same toggle as Chest regions in the view bar": "리그에 가슴 영역을 그리고 그 위에서
|
|
899
|
+
"Draw the chest regions on the rig and edit them there; the same toggle as Chest regions in the view bar": "리그에 가슴 영역을 그리고 그 위에서 편집해요. 뷰 바의 가슴 영역과 같은 토글이에요",
|
|
895
900
|
"Drawn": "그려짐",
|
|
896
901
|
"Drawn late": "지연 그려짐",
|
|
897
902
|
"Drawn page: ": "그려진 페이지: ",
|
|
898
903
|
"Drawn page: {0}": "그려진 페이지: {0}",
|
|
899
904
|
"Drawn; feedback unavailable": "그려짐; 피드백 사용 불가",
|
|
900
905
|
"Drop the whole delta for this attachment (asks first)": "이 어태치먼트의 전체 델타 버리기 (먼저 확인함)",
|
|
901
|
-
"Drop the whole mesh-edit delta for {0} / {1}? This cannot be undone.": "{0} / {1}의 전체 메시 편집 델타를 삭제할까요? 이 작업은 되돌릴 수
|
|
906
|
+
"Drop the whole mesh-edit delta for {0} / {1}? This cannot be undone.": "{0} / {1}의 전체 메시 편집 델타를 삭제할까요? 이 작업은 되돌릴 수 없어요.",
|
|
902
907
|
"Duration (s)": "지속 시간 (초)",
|
|
903
908
|
"EDIT_SUBMIT_UNCHECKED: applied build failed check — {0}": "EDIT_SUBMIT_UNCHECKED: 적용된 빌드가 검사를 통과하지 못함 — {0}",
|
|
904
909
|
"ENVIRONMENT · INSPECTION ONLY": "환경 · 검사 전용",
|
|
905
910
|
"ENVIRONMENT_CHECK_BODY_LIMIT: maximum 64 KiB": "ENVIRONMENT_CHECK_BODY_LIMIT: 최대 64 KiB",
|
|
906
911
|
"ENVIRONMENT_CHECK_FAILED: {0}": "ENVIRONMENT_CHECK_FAILED: {0}",
|
|
907
|
-
"ENVIRONMENT_NOT_APPLIED: the player stands at the runtime start values (wind [1, 0], gravity [0, 1]), which check and render read without --environment; move a control first": "ENVIRONMENT_NOT_APPLIED: 플레이어가 런타임 초기값(바람 [1, 0], 중력 [0, 1]) 상태이며, check와 render는 --environment 없이도 이 값을
|
|
912
|
+
"ENVIRONMENT_NOT_APPLIED: the player stands at the runtime start values (wind [1, 0], gravity [0, 1]), which check and render read without --environment; move a control first": "ENVIRONMENT_NOT_APPLIED: 플레이어가 런타임 초기값(바람 [1, 0], 중력 [0, 1]) 상태이며, check와 render는 --environment 없이도 이 값을 읽어요. 먼저 컨트롤을 조작하세요",
|
|
908
913
|
"ERROR PX": "오차 PX",
|
|
909
|
-
"Each edit is a config patch op at <code>/constraints/<i>/<field></code> naming its constraint. Apply runs the installed producer (<code>rig --config</code>, then <code>check</code>) into a scratch build and reloads it under the same wind, gust and jolt state; Reset returns to the inspected build and clears the pending ops. Live preview changes strength, damping, inertia, wind, gravity and mix on the next evaluation; mass and component toggles require Apply. Clear resumes authored values without resetting integrated history.": "각 편집은 해당 제약을 지정하는 <code>/constraints/<i>/<field></code>의 설정 패치
|
|
910
|
-
"Each edit is a config patch op at <code>/constraints/<i>/<field></code> naming its constraint. Apply runs the installed producer (<code>rig --config</code>, then <code>check</code>) into a scratch build and reloads it under the same wind, gust and jolt state; Reset returns to the inspected build and clears the pending ops. Live preview changes strength, damping, inertia, wind, gravity and mix on the next evaluation; mass and component toggles require Apply. Clear resumes authored values without resetting integrated history.": "각 편집은 해당 제약을 지정하는 <code>/constraints/<i>/<field></code>의 설정 패치
|
|
911
|
-
"Each edit is a config patch op at <code>/motion/tracks/<i>/…</code> or <code>/motion/blink/…</code>. Period is offered only among the divisors of <code>motion.duration</code> (the producer refuses any other, <code>CONFIG_PERIOD_DIVIDES_DURATION</code>). While edits are pending the preview drives the edited bones through the player's <code>adjust</code> with the producer's sine, <code>v(t) = base + amp·sin(2π(t/period − phase))</code>, on the bone the idle keys (<code><bone>_ctl</code> under ctl keys); it is never recorded or submitted. Apply runs the installed producer (<code>rig --config</code>, then <code>check</code>) into a scratch build and replaces the preview with the built idle; Reset returns to the inspected build and clears the pending ops.": "각 편집은 <code>/motion/tracks/<i>/…</code> 또는 <code>/motion/blink/…</code>의 설정 패치
|
|
912
|
-
"Each edit is a config patch op at <code>/motion/tracks/<i>/…</code> or <code>/motion/blink/…</code>. Period is offered only among the divisors of <code>motion.duration</code> (the producer refuses any other, <code>CONFIG_PERIOD_DIVIDES_DURATION</code>). While edits are pending the preview drives the edited bones through the player's <code>adjust</code> with the producer's sine, <code>v(t) = base + amp·sin(2π(t/period − phase))</code>, on the bone the idle keys (<code><bone>_ctl</code> under ctl keys); it is never recorded or submitted. Apply runs the installed producer (<code>rig --config</code>, then <code>check</code>) into a scratch build and replaces the preview with the built idle; Reset returns to the inspected build and clears the pending ops.": "각 편집은 <code>/motion/tracks/<i>/…</code> 또는 <code>/motion/blink/…</code>의 설정 패치
|
|
913
|
-
"Each reading is one <code>rigc render</code> of the drawn animation, on the inspected build and on the latest scratch build. Its frames become ticks under the timeline (<span class=\"tick-swatch inspected\" aria-hidden=\"true\"></span> inspected, <span class=\"tick-swatch scratch\" aria-hidden=\"true\"></span> scratch; click one to seek) and each pair gets its worst-frame line. A reading, not a gate: an unknown slot or bone is refused with rigc's own line.": "각 판독(reading)은 현재 그려진 애니메이션을 검사 대상 빌드와 최신 스크래치 빌드에서 각각 한 번씩 <code>rigc render</code>한
|
|
914
|
+
"Each edit is a config patch op at <code>/constraints/<i>/<field></code> naming its constraint. Apply runs the installed producer (<code>rig --config</code>, then <code>check</code>) into a scratch build and reloads it under the same wind, gust and jolt state; Reset returns to the inspected build and clears the pending ops. Live preview changes strength, damping, inertia, wind, gravity and mix on the next evaluation; mass and component toggles require Apply. Clear resumes authored values without resetting integrated history.": "각 편집은 해당 제약을 지정하는 <code>/constraints/<i>/<field></code>의 설정 패치 연산이에요. 적용(Apply)은 설치된 프로듀서(<code>rig --config</code> 후 <code>check</code>)를 스크래치 빌드로 실행하고 동일한 바람·돌풍·충격 상태로 다시 로드해요. 초기화(Reset)는 검사 대상 빌드로 되돌리고 대기 연산을 지워요. 실시간 미리보기는 다음 평가 시 강도, 감쇠, 관성, 바람, 중력 및 믹스를 변경하며, 질량과 컴포넌트 토글은 적용이 필요해요. 지우기(Clear)는 적분 히스토리를 리셋하지 않고 원래 작성된 값을 재개해요.",
|
|
915
|
+
"Each edit is a config patch op at <code>/constraints/<i>/<field></code> naming its constraint. Apply runs the installed producer (<code>rig --config</code>, then <code>check</code>) into a scratch build and reloads it under the same wind, gust and jolt state; Reset returns to the inspected build and clears the pending ops. Live preview changes strength, damping, inertia, wind, gravity and mix on the next evaluation; mass and component toggles require Apply. Clear resumes authored values without resetting integrated history.": "각 편집은 해당 제약을 지정하는 <code>/constraints/<i>/<field></code>의 설정 패치 연산이에요. 적용(Apply)은 설치된 프로듀서(<code>rig --config</code> 후 <code>check</code>)를 스크래치 빌드로 실행하고 동일한 바람·돌풍·충격 상태로 다시 로드해요. 초기화(Reset)는 검사 대상 빌드로 되돌리고 대기 연산을 지워요. 실시간 미리보기는 다음 평가 시 강도, 감쇠, 관성, 바람, 중력 및 믹스를 변경하며, 질량과 컴포넌트 토글은 적용이 필요해요. 지우기(Clear)는 적분 히스토리를 리셋하지 않고 원래 작성된 값을 재개해요.",
|
|
916
|
+
"Each edit is a config patch op at <code>/motion/tracks/<i>/…</code> or <code>/motion/blink/…</code>. Period is offered only among the divisors of <code>motion.duration</code> (the producer refuses any other, <code>CONFIG_PERIOD_DIVIDES_DURATION</code>). While edits are pending the preview drives the edited bones through the player's <code>adjust</code> with the producer's sine, <code>v(t) = base + amp·sin(2π(t/period − phase))</code>, on the bone the idle keys (<code><bone>_ctl</code> under ctl keys); it is never recorded or submitted. Apply runs the installed producer (<code>rig --config</code>, then <code>check</code>) into a scratch build and replaces the preview with the built idle; Reset returns to the inspected build and clears the pending ops.": "각 편집은 <code>/motion/tracks/<i>/…</code> 또는 <code>/motion/blink/…</code>의 설정 패치 연산이에요. 주기(Period)는 <code>motion.duration</code>의 약수 중에서만 제공돼요(그 외의 값은 프로듀서가 <code>CONFIG_PERIOD_DIVIDES_DURATION</code>으로 거부함). 편집이 대기 중일 때 미리보기는 아이들이 키잉하는 본(ctl 키 모드에서는 <code><bone>_ctl</code>)에 프로듀서의 사인 함수 <code>v(t) = base + amp·sin(2π(t/period − phase))</code>를 플레이어의 <code>adjust</code>로 구동하며, 이는 기록되거나 제출되지 않아요. 적용(Apply)은 설치된 프로듀서(<code>rig --config</code> 후 <code>check</code>)를 스크래치 빌드로 실행하고 미리보기를 빌드된 아이들로 교체해요. 초기화는 검사 대상 빌드로 되돌리고 대기 연산을 지워요.",
|
|
917
|
+
"Each edit is a config patch op at <code>/motion/tracks/<i>/…</code> or <code>/motion/blink/…</code>. Period is offered only among the divisors of <code>motion.duration</code> (the producer refuses any other, <code>CONFIG_PERIOD_DIVIDES_DURATION</code>). While edits are pending the preview drives the edited bones through the player's <code>adjust</code> with the producer's sine, <code>v(t) = base + amp·sin(2π(t/period − phase))</code>, on the bone the idle keys (<code><bone>_ctl</code> under ctl keys); it is never recorded or submitted. Apply runs the installed producer (<code>rig --config</code>, then <code>check</code>) into a scratch build and replaces the preview with the built idle; Reset returns to the inspected build and clears the pending ops.": "각 편집은 <code>/motion/tracks/<i>/…</code> 또는 <code>/motion/blink/…</code>의 설정 패치 연산이에요. 주기(Period)는 <code>motion.duration</code>의 약수 중에서만 제공돼요(그 외의 값은 프로듀서가 <code>CONFIG_PERIOD_DIVIDES_DURATION</code>으로 거부함). 편집이 대기 중일 때 미리보기는 아이들이 키잉하는 본(ctl 키 모드에서는 <code><bone>_ctl</code>)에 프로듀서의 사인 함수 <code>v(t) = base + amp·sin(2π(t/period − phase))</code>를 플레이어의 <code>adjust</code>로 구동하며, 이는 기록되거나 제출되지 않아요. 적용(Apply)은 설치된 프로듀서(<code>rig --config</code> 후 <code>check</code>)를 스크래치 빌드로 실행하고 미리보기를 빌드된 아이들로 교체해요. 초기화는 검사 대상 빌드로 되돌리고 대기 연산을 지워요.",
|
|
918
|
+
"Each reading is one <code>rigc render</code> of the drawn animation, on the inspected build and on the latest scratch build. Its frames become ticks under the timeline (<span class=\"tick-swatch inspected\" aria-hidden=\"true\"></span> inspected, <span class=\"tick-swatch scratch\" aria-hidden=\"true\"></span> scratch; click one to seek) and each pair gets its worst-frame line. A reading, not a gate: an unknown slot or bone is refused with rigc's own line.": "각 판독(reading)은 현재 그려진 애니메이션을 검사 대상 빌드와 최신 스크래치 빌드에서 각각 한 번씩 <code>rigc render</code>한 결과예요. 해당 프레임들은 타임라인 아래의 눈금(<span class=\"tick-swatch inspected\" aria-hidden=\"true\"></span> 검사 대상, <span class=\"tick-swatch scratch\" aria-hidden=\"true\"></span> 스크래치; 클릭하여 이동)이 되며 각 쌍마다 최악 프레임 라인이 표시돼요. 이는 게이트가 아닌 판독 도구이며, 알 수 없는 슬롯이나 본은 rigc 자체 메시지로 거부돼요.",
|
|
914
919
|
"Ease: {0}": "이징: {0}",
|
|
915
920
|
"Edges": "엣지",
|
|
916
921
|
"Edges · key E": "엣지 · 단축키 E",
|
|
@@ -919,14 +924,14 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
919
924
|
"Edit cuts on stage": "스테이지에서 컷 편집",
|
|
920
925
|
"Edit mesh": "메시 편집",
|
|
921
926
|
"Edit mesh on {0} ({1} {2})": "{0}의 메시 편집 ({1} {2})",
|
|
922
|
-
"Edit the selected slot's actual mesh as a typed delta: preview only, the producer retriangulates": "선택된 슬롯의 실제 메시를 타입 지정 델타로
|
|
927
|
+
"Edit the selected slot's actual mesh as a typed delta: preview only, the producer retriangulates": "선택된 슬롯의 실제 메시를 타입 지정 델타로 편집해요 (미리보기 전용, 프로듀서가 재삼각분할 수행)",
|
|
923
928
|
"Editable clip \"{0}\" from {1}{2}{3}": "편집 가능한 클립 \"{0}\" · 출처: {1}{2}{3}",
|
|
924
929
|
"Editing": "편집 중",
|
|
925
|
-
"Editing Build {0} ({1}) in {2} mode; Apply writes to scratch while A and B retain their fixed on-disk source bindings.": "{2} 모드에서 빌드 {0} ({1}) 편집 중; 적용은 임시 빌드에 기록하며 A와 B는 디스크의 고정 소스 바인딩을
|
|
926
|
-
"Edits the selected part's <code>meshes.<part></code> entry from the handoff config (the grid and contour modes). Apply sends the whole pending entry to the installed producer's <code>remesh --mesh</code> (one patch op at <code>/meshes/<part></code>), compiles and checks the revision, and reloads it with the mesh edges on; Reset returns to the inspected build and the config's entry. Slider ranges are review's; the number field takes any value, and the producer judges it.": "핸드오프 설정에서 선택된 파츠의 <code>meshes.<part></code> 항목(그리드 및 윤곽 모드)을
|
|
927
|
-
"Edits the selected part's <code>meshes.<part></code> entry from the handoff config (the grid and contour modes). Apply sends the whole pending entry to the installed producer's <code>remesh --mesh</code> (one patch op at <code>/meshes/<part></code>), compiles and checks the revision, and reloads it with the mesh edges on; Reset returns to the inspected build and the config's entry. Slider ranges are review's; the number field takes any value, and the producer judges it.": "핸드오프 설정에서 선택된 파츠의 <code>meshes.<part></code> 항목(그리드 및 윤곽 모드)을
|
|
930
|
+
"Editing Build {0} ({1}) in {2} mode; Apply writes to scratch while A and B retain their fixed on-disk source bindings.": "{2} 모드에서 빌드 {0} ({1}) 편집 중; 적용은 임시 빌드에 기록하며 A와 B는 디스크의 고정 소스 바인딩을 유지해요.",
|
|
931
|
+
"Edits the selected part's <code>meshes.<part></code> entry from the handoff config (the grid and contour modes). Apply sends the whole pending entry to the installed producer's <code>remesh --mesh</code> (one patch op at <code>/meshes/<part></code>), compiles and checks the revision, and reloads it with the mesh edges on; Reset returns to the inspected build and the config's entry. Slider ranges are review's; the number field takes any value, and the producer judges it.": "핸드오프 설정에서 선택된 파츠의 <code>meshes.<part></code> 항목(그리드 및 윤곽 모드)을 편집해요. 적용(Apply)은 대기 중인 전체 항목을 설치된 프로듀서의 <code>remesh --mesh</code>(<code>/meshes/<part></code>의 단일 패치 연산)로 보내 리비전을 컴파일·점검한 뒤 메시 엣지를 켜고 다시 로드해요. 초기화(Reset)는 검사 대상 빌드와 설정의 원래 항목으로 되돌려요. 슬라이더 범위는 리뷰 앱의 편의 범위이며, 숫자 입력란에는 어떤 값이든 입력할 수 있고 최종 판단은 프로듀서가 수행해요.",
|
|
932
|
+
"Edits the selected part's <code>meshes.<part></code> entry from the handoff config (the grid and contour modes). Apply sends the whole pending entry to the installed producer's <code>remesh --mesh</code> (one patch op at <code>/meshes/<part></code>), compiles and checks the revision, and reloads it with the mesh edges on; Reset returns to the inspected build and the config's entry. Slider ranges are review's; the number field takes any value, and the producer judges it.": "핸드오프 설정에서 선택된 파츠의 <code>meshes.<part></code> 항목(그리드 및 윤곽 모드)을 편집해요. 적용(Apply)은 대기 중인 전체 항목을 설치된 프로듀서의 <code>remesh --mesh</code>(<code>/meshes/<part></code>의 단일 패치 연산)로 보내 리비전을 컴파일·점검한 뒤 메시 엣지를 켜고 다시 로드해요. 초기화(Reset)는 검사 대상 빌드와 설정의 원래 항목으로 되돌려요. 슬라이더 범위는 리뷰 앱의 편의 범위이며, 숫자 입력란에는 어떤 값이든 입력할 수 있고 최종 판단은 프로듀서가 수행해요.",
|
|
928
933
|
"Effective layout": "적용 레이아웃",
|
|
929
|
-
"Enable Bone points to pick bones on stage. Overlapping points pick the last active bone in source order; use the tree for an exact target. Attached Parts rows highlight together.": "스테이지에서 본을 선택하려면 본 포인트를 활성화하세요. 겹치는 포인트는 소스 순서상 마지막 활성 본을 선택하므로 정확한 대상은 트리를 사용하세요. 연결된 파츠 행이 함께
|
|
934
|
+
"Enable Bone points to pick bones on stage. Overlapping points pick the last active bone in source order; use the tree for an exact target. Attached Parts rows highlight together.": "스테이지에서 본을 선택하려면 본 포인트를 활성화하세요. 겹치는 포인트는 소스 순서상 마지막 활성 본을 선택하므로 정확한 대상은 트리를 사용하세요. 연결된 파츠 행이 함께 강조돼요.",
|
|
930
935
|
"End": "끝",
|
|
931
936
|
"End frame": "끝 프레임",
|
|
932
937
|
"En": "En",
|
|
@@ -943,30 +948,30 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
943
948
|
"Environment": "환경",
|
|
944
949
|
"Environment unchanged: {0}": "환경 변경 없음: {0}",
|
|
945
950
|
"Exact bone, slot or rig name": "정확한 본, 슬롯 또는 리그 이름",
|
|
946
|
-
"Exact frame selection unavailable: requestVideoFrameCallback required; seconds playback remains available.": "정확한 프레임 선택 불가: requestVideoFrameCallback이
|
|
951
|
+
"Exact frame selection unavailable: requestVideoFrameCallback required; seconds playback remains available.": "정확한 프레임 선택 불가: requestVideoFrameCallback이 필요해요. 초 단위 재생은 계속 사용할 수 있어요.",
|
|
947
952
|
"Exact frame selection unavailable: {0}": "정확한 프레임 선택 불가: {0}",
|
|
948
953
|
"Exact inspection seconds": "정확한 검사 시간(초)",
|
|
949
954
|
"Exact selection: nearest real reference PTS; review frame = unique explicit sample association.": "정확한 선택: 가장 가까운 실제 레퍼런스 PTS; 리뷰 프레임 = 고유한 명시적 샘플 매핑.",
|
|
950
955
|
"Exact slot name or text": "정확한 슬롯 이름 또는 텍스트",
|
|
951
956
|
"Exact stored curve and control points": "저장된 정확한 커브 및 제어점",
|
|
952
|
-
"Expected application/json": "application/json이
|
|
957
|
+
"Expected application/json": "application/json이 필요해요",
|
|
953
958
|
"Explicit fps + frame0 mapping": "명시적 fps + frame0 매핑",
|
|
954
959
|
"Explicit producer frame": "명시적 프로듀서 프레임",
|
|
955
960
|
"Explicit time": "명시적 시간",
|
|
956
|
-
"Explicit time {0} s is outside the current range of {1} s. No substitute time was used.": "명시적 시간 {0}초가 현재 범위({1}초)를
|
|
961
|
+
"Explicit time {0} s is outside the current range of {1} s. No substitute time was used.": "명시적 시간 {0}초가 현재 범위({1}초)를 벗어났어요. 대체 시간은 사용되지 않았어요.",
|
|
957
962
|
"Explicitly select A or B as the report defining the frame range.": "프레임 범위를 정의하는 리포트로 A 또는 B를 명시적으로 선택하세요.",
|
|
958
963
|
"Explicitly select an animation to export.": "내보낼 애니메이션을 명시적으로 선택하세요.",
|
|
959
964
|
"Export frame strip": "프레임 스트립 내보내기",
|
|
960
965
|
"Export range": "내보내기 구간",
|
|
961
966
|
"Export schedule": "스케줄 내보내기",
|
|
962
|
-
"Exported {0}. The download is the bytes readings, Apply and feedback carry; the package is unchanged.": "{0} 내보내기 완료. 다운로드된 파일은 측정, 적용 및 피드백에 포함되는 바이트와 동일하며 패키지는 변경되지
|
|
967
|
+
"Exported {0}. The download is the bytes readings, Apply and feedback carry; the package is unchanged.": "{0} 내보내기 완료. 다운로드된 파일은 측정, 적용 및 피드백에 포함되는 바이트와 동일하며 패키지는 변경되지 않아요.",
|
|
963
968
|
"F0–F{0} for the explicit clock and current clip · inclusive": "명시적 클록 및 현재 클립 기준 F0–F{0} · 양끝 포함",
|
|
964
969
|
"F? / ? · frame range unknown": "F? / ? · 프레임 범위 알 수 없음",
|
|
965
970
|
"Feedback": "피드백",
|
|
966
971
|
"Feedback JSON": "피드백 JSON",
|
|
967
|
-
"Feedback requires a pair submitted before the known next-reference estimate or paused inspection.": "피드백을 추가하려면 알려진 다음 레퍼런스 추정치 이전에 제출된 쌍이거나 일시정지된 점검 상태여야
|
|
968
|
-
"Feedback {0}: Its animation is missing or differs from the comparison animation. The range was not reassigned to another animation.": "피드백 {0}: 애니메이션이 없거나 비교 애니메이션과
|
|
969
|
-
"Feedback {0}: Its animation is missing or differs from the selected animation. Batch export supports ranges from the same animation only.": "피드백 {0}: 애니메이션이 없거나 선택된 애니메이션과
|
|
972
|
+
"Feedback requires a pair submitted before the known next-reference estimate or paused inspection.": "피드백을 추가하려면 알려진 다음 레퍼런스 추정치 이전에 제출된 쌍이거나 일시정지된 점검 상태여야 해요.",
|
|
973
|
+
"Feedback {0}: Its animation is missing or differs from the comparison animation. The range was not reassigned to another animation.": "피드백 {0}: 애니메이션이 없거나 비교 애니메이션과 달라요. 범위가 다른 애니메이션에 재할당되지 않았어요.",
|
|
974
|
+
"Feedback {0}: Its animation is missing or differs from the selected animation. Batch export supports ranges from the same animation only.": "피드백 {0}: 애니메이션이 없거나 선택된 애니메이션과 달라요. 일괄 내보내기는 동일한 애니메이션의 범위만 지원해요.",
|
|
970
975
|
"Fields": "필드",
|
|
971
976
|
"Fields not supplied: {0} (not classified as none)": "제공되지 않은 필드: {0} (없음으로 분류되지 않음)",
|
|
972
977
|
"Find slot": "슬롯 찾기",
|
|
@@ -992,7 +997,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
992
997
|
"From value": "시작 값",
|
|
993
998
|
"Full provenance": "전체 출처 정보",
|
|
994
999
|
"F{0} / {1}{2}": "F{0} / {1}{2}",
|
|
995
|
-
"F{0} maps to {1} s, outside the current reference range. The requested time was not changed.": "F{0}은(는) {1}초에 매핑되며 현재 레퍼런스 범위를
|
|
1000
|
+
"F{0} maps to {1} s, outside the current reference range. The requested time was not changed.": "F{0}은(는) {1}초에 매핑되며 현재 레퍼런스 범위를 벗어나요. 요청된 시간은 변경되지 않았어요.",
|
|
996
1001
|
"F{0} · Explicit time {1} s{2}": "F{0} · 명시적 시간 {1}초{2}",
|
|
997
1002
|
"F{0}–{1}": "F{0}–{1}",
|
|
998
1003
|
"Generated rig": "생성된 리그",
|
|
@@ -1014,32 +1019,32 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1014
1019
|
"Hold": "고정",
|
|
1015
1020
|
"Hover a vertex to read its stored weights": "정점 위에 마우스를 올려 저장된 가중치 확인",
|
|
1016
1021
|
"IDLE TRACKS · APPLY REBUILDS": "아이들 트랙 · 적용 시 리빌드",
|
|
1017
|
-
"IDLE_BLINK_ABSENT: the config states no blink.brow_drop (no brows group)": "IDLE_BLINK_ABSENT: 설정에 blink.brow_drop(눈썹 그룹)이 선언되어 있지
|
|
1022
|
+
"IDLE_BLINK_ABSENT: the config states no blink.brow_drop (no brows group)": "IDLE_BLINK_ABSENT: 설정에 blink.brow_drop(눈썹 그룹)이 선언되어 있지 않아요",
|
|
1018
1023
|
"IDLE_BONE_UNKNOWN: name a bone": "IDLE_BONE_UNKNOWN: 본 이름을 지정하세요",
|
|
1019
|
-
"IDLE_CHAIN_UNKNOWN: {0} is not a chain config.bones declares": "IDLE_CHAIN_UNKNOWN: {0}은(는) config.bones에 선언된 체인이
|
|
1024
|
+
"IDLE_CHAIN_UNKNOWN: {0} is not a chain config.bones declares": "IDLE_CHAIN_UNKNOWN: {0}은(는) config.bones에 선언된 체인이 아니에요",
|
|
1020
1025
|
"IDLE_DRAFT_UNREADABLE: ops[{0}] {1}": "IDLE_DRAFT_UNREADABLE: ops[{0}] {1}",
|
|
1021
|
-
"IDLE_DRAFT_UNREADABLE: the ops are not the ones the panel writes for the idle they describe": "IDLE_DRAFT_UNREADABLE: 작업 목록이 해당 아이들에 대해 패널이 기록하는 형식과 일치하지
|
|
1022
|
-
"IDLE_FIELD_UNKNOWN: {0} is not a chain track": "IDLE_FIELD_UNKNOWN: {0}은(는) 체인 트랙이
|
|
1023
|
-
"IDLE_FIELD_UNKNOWN: {0} is not a field of a {1} track": "IDLE_FIELD_UNKNOWN: {0}은(는) {1} 트랙의 필드가
|
|
1026
|
+
"IDLE_DRAFT_UNREADABLE: the ops are not the ones the panel writes for the idle they describe": "IDLE_DRAFT_UNREADABLE: 작업 목록이 해당 아이들에 대해 패널이 기록하는 형식과 일치하지 않아요",
|
|
1027
|
+
"IDLE_FIELD_UNKNOWN: {0} is not a chain track": "IDLE_FIELD_UNKNOWN: {0}은(는) 체인 트랙이 아니에요",
|
|
1028
|
+
"IDLE_FIELD_UNKNOWN: {0} is not a field of a {1} track": "IDLE_FIELD_UNKNOWN: {0}은(는) {1} 트랙의 필드가 아니에요",
|
|
1024
1029
|
"IDLE_LINK_UNKNOWN: link {0} of {1}": "IDLE_LINK_UNKNOWN: {1}의 링크 {0}",
|
|
1025
|
-
"IDLE_NOTHING_PENDING: no pending ops": "IDLE_NOTHING_PENDING: 보류 중인 작업이
|
|
1026
|
-
"IDLE_PREVIEW_BLINK: blink edits are eased keys, not sines, and are not previewed — Apply decides": "IDLE_PREVIEW_BLINK: 눈 깜빡임 편집은 사인파가 아닌 이징 키이므로 미리보기가 제공되지
|
|
1027
|
-
"IDLE_PREVIEW_BONE_ABSENT: {0} is not a bone of the drawn model — Apply decides": "IDLE_PREVIEW_BONE_ABSENT: {0}은(는) 그려진 모델의 본이
|
|
1028
|
-
"IDLE_PREVIEW_TARGET_UNKNOWN: {0}.{1} is not keyed by the inspected idle; under --idle-keys ctl the producer keys {2}{3} instead when a mesh is weighted to {4}, which review does not decide — Apply decides": "IDLE_PREVIEW_TARGET_UNKNOWN: 점검 중인 아이들에 {0}.{1} 키가
|
|
1030
|
+
"IDLE_NOTHING_PENDING: no pending ops": "IDLE_NOTHING_PENDING: 보류 중인 작업이 없어요",
|
|
1031
|
+
"IDLE_PREVIEW_BLINK: blink edits are eased keys, not sines, and are not previewed — Apply decides": "IDLE_PREVIEW_BLINK: 눈 깜빡임 편집은 사인파가 아닌 이징 키이므로 미리보기가 제공되지 않아요 — 적용 시 반영돼요",
|
|
1032
|
+
"IDLE_PREVIEW_BONE_ABSENT: {0} is not a bone of the drawn model — Apply decides": "IDLE_PREVIEW_BONE_ABSENT: {0}은(는) 그려진 모델의 본이 아니에요 — 적용 시 확정돼요",
|
|
1033
|
+
"IDLE_PREVIEW_TARGET_UNKNOWN: {0}.{1} is not keyed by the inspected idle; under --idle-keys ctl the producer keys {2}{3} instead when a mesh is weighted to {4}, which review does not decide — Apply decides": "IDLE_PREVIEW_TARGET_UNKNOWN: 점검 중인 아이들에 {0}.{1} 키가 없어요. --idle-keys ctl에서 메시가 {4}에 가중된 경우 프로듀서는 대신 {2}{3}에 키를 설정하며, 이는 리뷰가 아닌 적용 시 결정돼요",
|
|
1029
1034
|
"IDLE_PROP_UNKNOWN: {0} (one of {1})": "IDLE_PROP_UNKNOWN: {0} ({1} 중 하나)",
|
|
1030
|
-
"IDLE_TRACKS_UNAVAILABLE: no producer handoff": "IDLE_TRACKS_UNAVAILABLE: 프로듀서 핸드오프가
|
|
1035
|
+
"IDLE_TRACKS_UNAVAILABLE: no producer handoff": "IDLE_TRACKS_UNAVAILABLE: 프로듀서 핸드오프가 없어요",
|
|
1031
1036
|
"IDLE_TRACKS_UNAVAILABLE: {0}": "IDLE_TRACKS_UNAVAILABLE: {0}",
|
|
1032
1037
|
"IDLE_TRACK_UNKNOWN: {0}": "IDLE_TRACK_UNKNOWN: {0}",
|
|
1033
|
-
"IDLE_VALUE_INVALID: period must be a finite number": "IDLE_VALUE_INVALID: 주기는 유한한 숫자여야
|
|
1034
|
-
"IDLE_VALUE_INVALID: {0} cannot be absent": "IDLE_VALUE_INVALID: {0}은(는) 비워둘 수
|
|
1035
|
-
"IDLE_VALUE_INVALID: {0} must be a finite number": "IDLE_VALUE_INVALID: {0}은(는) 유한한 숫자여야
|
|
1038
|
+
"IDLE_VALUE_INVALID: period must be a finite number": "IDLE_VALUE_INVALID: 주기는 유한한 숫자여야 해요",
|
|
1039
|
+
"IDLE_VALUE_INVALID: {0} cannot be absent": "IDLE_VALUE_INVALID: {0}은(는) 비워둘 수 없어요",
|
|
1040
|
+
"IDLE_VALUE_INVALID: {0} must be a finite number": "IDLE_VALUE_INVALID: {0}은(는) 유한한 숫자여야 해요",
|
|
1036
1041
|
"INPUTS": "입력 소스",
|
|
1037
1042
|
"INSPECTOR": "인스펙터",
|
|
1038
|
-
"INSPECTOR_SCROLL: expected tab object": "INSPECTOR_SCROLL: 탭 객체가
|
|
1039
|
-
"INSPECTOR_SCROLL: finite nonnegative x/y <=10000000 required": "INSPECTOR_SCROLL: 10000000 이하의 유한한 0 이상 x/y가
|
|
1043
|
+
"INSPECTOR_SCROLL: expected tab object": "INSPECTOR_SCROLL: 탭 객체가 필요해요",
|
|
1044
|
+
"INSPECTOR_SCROLL: finite nonnegative x/y <=10000000 required": "INSPECTOR_SCROLL: 10000000 이하의 유한한 0 이상 x/y가 필요해요",
|
|
1040
1045
|
"INSPECTOR_SCROLL: unknown tab": "INSPECTOR_SCROLL: 알 수 없는 탭",
|
|
1041
|
-
"INSPECTOR_SCROLL: unknown tab or malformed offset": "INSPECTOR_SCROLL: 알 수 없는 탭이거나 잘못된
|
|
1042
|
-
"INSPECTOR_SCROLL_LAYOUT: finite nonnegative extents required": "INSPECTOR_SCROLL_LAYOUT: 유한한 0 이상의 크기가
|
|
1046
|
+
"INSPECTOR_SCROLL: unknown tab or malformed offset": "INSPECTOR_SCROLL: 알 수 없는 탭이거나 잘못된 오프셋이에요",
|
|
1047
|
+
"INSPECTOR_SCROLL_LAYOUT: finite nonnegative extents required": "INSPECTOR_SCROLL_LAYOUT: 유한한 0 이상의 크기가 필요해요",
|
|
1043
1048
|
"Idle preview unavailable": "아이들 미리보기 사용 불가",
|
|
1044
1049
|
"Idle repeat paused": "아이들 반복 일시정지됨",
|
|
1045
1050
|
"Idle restart cancelled · restoring paused inspection": "아이들 재시작 취소됨 · 일시정지된 점검 복원 중",
|
|
@@ -1061,9 +1066,9 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1061
1066
|
"Inspect pose": "포즈 검사",
|
|
1062
1067
|
"Inspect time": "시간 검사",
|
|
1063
1068
|
"Inspected rig": "점검 중인 리그",
|
|
1064
|
-
"Inspecting Build {0} ({1}) in {2} mode at the actual reference video time; Apply rebuilds only Build {3} in scratch.": "실제 레퍼런스 비디오 시간에서 {2} 모드로 빌드 {0} ({1}) 점검 중; 적용은 임시 빌드에 빌드 {3}만 다시
|
|
1065
|
-
"Inspecting Build {0} ({1}) in {2} mode: Animate tools apply motion changes only to Build {3} in a scratch build. The reference video FPS is not used to infer the pose frame clock.": "{2} 모드로 빌드 {0} ({1}) 점검 중: 애니메이트 도구는 임시 빌드에서 빌드 {3}에만 모션 변경을
|
|
1066
|
-
"Inspecting both rigs at the actual reference video time.": "실제 레퍼런스 비디오 시간에서 두 리그를 점검
|
|
1069
|
+
"Inspecting Build {0} ({1}) in {2} mode at the actual reference video time; Apply rebuilds only Build {3} in scratch.": "실제 레퍼런스 비디오 시간에서 {2} 모드로 빌드 {0} ({1}) 점검 중; 적용은 임시 빌드에 빌드 {3}만 다시 빌드해요.",
|
|
1070
|
+
"Inspecting Build {0} ({1}) in {2} mode: Animate tools apply motion changes only to Build {3} in a scratch build. The reference video FPS is not used to infer the pose frame clock.": "{2} 모드로 빌드 {0} ({1}) 점검 중: 애니메이트 도구는 임시 빌드에서 빌드 {3}에만 모션 변경을 적용해요. 레퍼런스 비디오 FPS는 포즈 프레임 클록 추론에 사용되지 않아요.",
|
|
1071
|
+
"Inspecting both rigs at the actual reference video time.": "실제 레퍼런스 비디오 시간에서 두 리그를 점검 중이에요.",
|
|
1067
1072
|
"Inspection context:": "점검 컨텍스트:",
|
|
1068
1073
|
"Inspection controls": "검사 컨트롤",
|
|
1069
1074
|
"Inspection display controls": "검사 표시 컨트롤",
|
|
@@ -1079,11 +1084,11 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1079
1084
|
"Issue Markdown": "이슈 마크다운",
|
|
1080
1085
|
"JOB_HOST_OPTION_ID_INVALID: {0} (listener={1}, requested={2})": "JOB_HOST_OPTION_ID_INVALID: {0} (listener={1}, requested={2})",
|
|
1081
1086
|
"JOB_HOST_REUSE_MISMATCH: {0} (listener={1}, requested={2})": "JOB_HOST_REUSE_MISMATCH: {0} (listener={1}, requested={2})",
|
|
1082
|
-
"JSON body required": "JSON 본문이
|
|
1087
|
+
"JSON body required": "JSON 본문이 필요해요",
|
|
1083
1088
|
"JSON frames and provenance": "JSON 프레임 및 출처 정보",
|
|
1084
1089
|
"Jolt": "충격(졸트)",
|
|
1085
|
-
"Jolt queued · it reaches the physics on the next steps; press Play.": "충격(Jolt) 대기열 등록됨 · 다음 스텝에서 물리에
|
|
1086
|
-
"KEY_TIME_OUT_OF_DOMAIN: no substitute time was used.": "KEY_TIME_OUT_OF_DOMAIN: 대체 시간은 사용되지
|
|
1090
|
+
"Jolt queued · it reaches the physics on the next steps; press Play.": "충격(Jolt) 대기열 등록됨 · 다음 스텝에서 물리에 반영돼요. 재생을 누르세요.",
|
|
1091
|
+
"KEY_TIME_OUT_OF_DOMAIN: no substitute time was used.": "KEY_TIME_OUT_OF_DOMAIN: 대체 시간은 사용되지 않았어요.",
|
|
1087
1092
|
"Key editing disabled ({0})": "키 편집 비활성화됨 ({0})",
|
|
1088
1093
|
"Key t (s) ": "키 t (초) ",
|
|
1089
1094
|
"Keyed animation preview": "키 애니메이션 미리보기",
|
|
@@ -1094,10 +1099,10 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1094
1099
|
"L region centre y": "L 영역 중심 y",
|
|
1095
1100
|
"L region core radius": "L 영역 코어 반경",
|
|
1096
1101
|
"LANDMARKS_INCOMPLETE: place {0}": "LANDMARKS_INCOMPLETE: {0}을(를) 배치하세요",
|
|
1097
|
-
"LANDMARK_VALUE_INVALID: alpha is a core ratio in (0, 1)": "LANDMARK_VALUE_INVALID: 알파는 (0, 1) 범위의 코어 비율이어야
|
|
1098
|
-
"LANDMARK_VALUE_INVALID: clearance": "LANDMARK_VALUE_INVALID: 간격(clearance) 값이 유효하지
|
|
1102
|
+
"LANDMARK_VALUE_INVALID: alpha is a core ratio in (0, 1)": "LANDMARK_VALUE_INVALID: 알파는 (0, 1) 범위의 코어 비율이어야 해요",
|
|
1103
|
+
"LANDMARK_VALUE_INVALID: clearance": "LANDMARK_VALUE_INVALID: 간격(clearance) 값이 유효하지 않아요",
|
|
1099
1104
|
"LANDMARK_VALUE_INVALID: {0}": "LANDMARK_VALUE_INVALID: {0}",
|
|
1100
|
-
"LANDMARK_VALUE_INVALID: {0} is off the 1/256 px grid": "LANDMARK_VALUE_INVALID: {0}이(가) 1/256 px 그리드를
|
|
1105
|
+
"LANDMARK_VALUE_INVALID: {0} is off the 1/256 px grid": "LANDMARK_VALUE_INVALID: {0}이(가) 1/256 px 그리드를 벗어났어요",
|
|
1101
1106
|
"LINT not run": "LINT 실행 안 됨",
|
|
1102
1107
|
"Landmark constants": "랜드마크 상수",
|
|
1103
1108
|
"Landmarks": "랜드마크",
|
|
@@ -1105,14 +1110,14 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1105
1110
|
"Last draw backend": "마지막 드로우 백엔드",
|
|
1106
1111
|
"Last drawn · {0} · held": "마지막 그림 · {0} · 유지됨",
|
|
1107
1112
|
"Latest scratch build": "최신 임시 빌드",
|
|
1108
|
-
"Legacy appearance storage read was denied; defaults remain usable.": "기존 외관 저장소 읽기가
|
|
1109
|
-
"Legacy appearance value was refused; defaults remain usable.": "기존 외관 값이
|
|
1113
|
+
"Legacy appearance storage read was denied; defaults remain usable.": "기존 외관 저장소 읽기가 거부됐어요. 기본값을 계속 사용할 수 있어요.",
|
|
1114
|
+
"Legacy appearance value was refused; defaults remain usable.": "기존 외관 값이 거부됐어요. 기본값을 계속 사용할 수 있어요.",
|
|
1110
1115
|
"Light": "라이트",
|
|
1111
1116
|
"Linear": "선형(Linear)",
|
|
1112
1117
|
"Load": "불러오기",
|
|
1113
1118
|
"Load a rig-pose-map/1 file": "rig-pose-map/1 파일 불러오기",
|
|
1114
1119
|
"Load failed": "불러오기 실패",
|
|
1115
|
-
"Load this revision on the stage as pending — nothing is applied; the Mesh panel's Apply applies it": "이 리비전을 보류 상태로 스테이지에
|
|
1120
|
+
"Load this revision on the stage as pending — nothing is applied; the Mesh panel's Apply applies it": "이 리비전을 보류 상태로 스테이지에 불러와요 — 아직 적용되지 않으며 메시 패널의 적용 버튼으로 적용해요",
|
|
1116
1121
|
"Load {0} {1}": "{0} {1} 불러오기",
|
|
1117
1122
|
"Loading actual slots…": "실제 슬롯 불러오는 중…",
|
|
1118
1123
|
"Loading comparison provenance from the server…": "서버에서 비교 출처 정보 불러오는 중…",
|
|
@@ -1126,44 +1131,44 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1126
1131
|
"Loading reference…": "레퍼런스 불러오는 중…",
|
|
1127
1132
|
"Loading rig…": "리그 불러오는 중…",
|
|
1128
1133
|
"Loading…": "불러오는 중…",
|
|
1129
|
-
"Local draft could not be cleared.": "로컬 초안을 지울 수
|
|
1130
|
-
"Local draft could not be saved: {0}. Export feedback before leaving.": "로컬 초안을 저장할 수
|
|
1131
|
-
"Local draft discarded · current submitted review retained.": "로컬 초안 폐기됨 · 현재 제출된 리뷰가
|
|
1132
|
-
"Local draft needs explicit recovery: {0}": "로컬 초안에 명시적 복구가
|
|
1134
|
+
"Local draft could not be cleared.": "로컬 초안을 지울 수 없어요.",
|
|
1135
|
+
"Local draft could not be saved: {0}. Export feedback before leaving.": "로컬 초안을 저장할 수 없어요: {0}. 페이지를 떠나기 전에 피드백을 내보내세요.",
|
|
1136
|
+
"Local draft discarded · current submitted review retained.": "로컬 초안 폐기됨 · 현재 제출된 리뷰가 유지돼요.",
|
|
1137
|
+
"Local draft needs explicit recovery: {0}": "로컬 초안에 명시적 복구가 필요해요: {0}",
|
|
1133
1138
|
"Local draft recovery refused: {0}": "로컬 초안 복구가 거부됨: {0}",
|
|
1134
|
-
"Local draft storage unavailable. Keep this page open or export feedback before leaving.": "로컬 초안 저장소를 사용할 수
|
|
1135
|
-
"Local view controls · source files stay unchanged": "로컬 뷰 컨트롤 · 소스 파일은 변경되지
|
|
1139
|
+
"Local draft storage unavailable. Keep this page open or export feedback before leaving.": "로컬 초안 저장소를 사용할 수 없어요. 이 페이지를 열어 두거나 떠나기 전에 피드백을 내보내세요.",
|
|
1140
|
+
"Local view controls · source files stay unchanged": "로컬 뷰 컨트롤 · 소스 파일은 변경되지 않아요",
|
|
1136
1141
|
"Local view was not saved: {0}": "로컬 뷰가 저장되지 않음: {0}",
|
|
1137
|
-
"Loopback host required": "루프백 호스트가
|
|
1142
|
+
"Loopback host required": "루프백 호스트가 필요해요",
|
|
1138
1143
|
"MAP · rig-pose-map/1": "맵 · rig-pose-map/1",
|
|
1139
1144
|
"MESH · APPLY REMESHES": "메시 · 적용 시 리메시",
|
|
1140
|
-
"MESH_EDIT_DRAFT_LIMIT: the local draft is full — download the JSON; edits after this are not kept on reload": "MESH_EDIT_DRAFT_LIMIT: 로컬 초안 용량이 가득
|
|
1141
|
-
"MESH_EDIT_NOTHING_PENDING: the delta holds no op; nothing is sent": "MESH_EDIT_NOTHING_PENDING: 델타에 작업이 없어 전송되지
|
|
1142
|
-
"MESH_EDIT_RIG_UNAVAILABLE: the compiled model document is still loading": "MESH_EDIT_RIG_UNAVAILABLE: 컴파일된 모델 문서를 아직 불러오는
|
|
1143
|
-
"MESH_EDIT_SOURCE_MISMATCH: {0} setup geometry does not match its stored identity or vertex count": "MESH_EDIT_SOURCE_MISMATCH: {0} 셋업 지오메트리가 저장된 식별 정보 또는 정점 수와 일치하지
|
|
1144
|
-
"MESH_PANEL_MODE: an auto entry is remeshed by the producer but this panel draws no auto controls; edit it in the config": "MESH_PANEL_MODE: auto 항목은 프로듀서가 리메시하지만 이 패널에는 auto 컨트롤이
|
|
1145
|
-
"MESH_PANEL_MODE: remesh --help names grid, contour and auto entries, not influence; an influence entry waits for the producer to document it": "MESH_PANEL_MODE: remesh --help는 grid, contour, auto 항목만 지정하며 influence는 포함하지
|
|
1146
|
-
"MESH_PANEL_NO_ENTRY: {0} has no meshes entry in the handoff config": "MESH_PANEL_NO_ENTRY: 핸드오프 설정에 {0}의 meshes 항목이
|
|
1145
|
+
"MESH_EDIT_DRAFT_LIMIT: the local draft is full — download the JSON; edits after this are not kept on reload": "MESH_EDIT_DRAFT_LIMIT: 로컬 초안 용량이 가득 찼어요 — JSON을 다운로드하세요. 이후 편집 내용은 새로고침 시 유지되지 않아요",
|
|
1146
|
+
"MESH_EDIT_NOTHING_PENDING: the delta holds no op; nothing is sent": "MESH_EDIT_NOTHING_PENDING: 델타에 작업이 없어 전송되지 않았어요",
|
|
1147
|
+
"MESH_EDIT_RIG_UNAVAILABLE: the compiled model document is still loading": "MESH_EDIT_RIG_UNAVAILABLE: 컴파일된 모델 문서를 아직 불러오는 중이에요",
|
|
1148
|
+
"MESH_EDIT_SOURCE_MISMATCH: {0} setup geometry does not match its stored identity or vertex count": "MESH_EDIT_SOURCE_MISMATCH: {0} 셋업 지오메트리가 저장된 식별 정보 또는 정점 수와 일치하지 않아요",
|
|
1149
|
+
"MESH_PANEL_MODE: an auto entry is remeshed by the producer but this panel draws no auto controls; edit it in the config": "MESH_PANEL_MODE: auto 항목은 프로듀서가 리메시하지만 이 패널에는 auto 컨트롤이 없어요. 설정 파일에서 편집하세요",
|
|
1150
|
+
"MESH_PANEL_MODE: remesh --help names grid, contour and auto entries, not influence; an influence entry waits for the producer to document it": "MESH_PANEL_MODE: remesh --help는 grid, contour, auto 항목만 지정하며 influence는 포함하지 않아요. influence 항목은 프로듀서 문서화가 필요해요",
|
|
1151
|
+
"MESH_PANEL_NO_ENTRY: {0} has no meshes entry in the handoff config": "MESH_PANEL_NO_ENTRY: 핸드오프 설정에 {0}의 meshes 항목이 없어요",
|
|
1147
1152
|
"MESH_PANEL_NO_PART: select a mesh part": "MESH_PANEL_NO_PART: 메시 파츠를 선택하세요",
|
|
1148
|
-
"MESH_PANEL_UNAVAILABLE: no producer handoff": "MESH_PANEL_UNAVAILABLE: 프로듀서 핸드오프가
|
|
1149
|
-
"MESH_POLYGON_POINTS: {0} point(s) placed; a polygon region needs 3 or more": "MESH_POLYGON_POINTS: 점 {0}개가
|
|
1150
|
-
"MESH_VALUE_INVALID: {0} must be a finite number": "MESH_VALUE_INVALID: {0}은(는) 유한한 숫자여야
|
|
1151
|
-
"MESH_VALUE_INVALID: {0}.{1} must be a finite number": "MESH_VALUE_INVALID: {0}.{1}은(는) 유한한 숫자여야
|
|
1153
|
+
"MESH_PANEL_UNAVAILABLE: no producer handoff": "MESH_PANEL_UNAVAILABLE: 프로듀서 핸드오프가 없어요",
|
|
1154
|
+
"MESH_POLYGON_POINTS: {0} point(s) placed; a polygon region needs 3 or more": "MESH_POLYGON_POINTS: 점 {0}개가 배치됐어요. 다각형 영역에는 3개 이상의 점이 필요해요",
|
|
1155
|
+
"MESH_VALUE_INVALID: {0} must be a finite number": "MESH_VALUE_INVALID: {0}은(는) 유한한 숫자여야 해요",
|
|
1156
|
+
"MESH_VALUE_INVALID: {0}.{1} must be a finite number": "MESH_VALUE_INVALID: {0}.{1}은(는) 유한한 숫자여야 해요",
|
|
1152
1157
|
"MODELING REVIEW": "모델링 리뷰",
|
|
1153
1158
|
"MODELING_HANDOFF_MISSING: ": "MODELING_HANDOFF_MISSING: ",
|
|
1154
|
-
"MODELING_HANDOFF_MISSING: no producer handoff — declare it with {0}{1}": "MODELING_HANDOFF_MISSING: 프로듀서 핸드오프가
|
|
1159
|
+
"MODELING_HANDOFF_MISSING: no producer handoff — declare it with {0}{1}": "MODELING_HANDOFF_MISSING: 프로듀서 핸드오프가 없어요 — {0}{1}(으)로 선언하세요",
|
|
1155
1160
|
"MODELING_INPUT_UNAVAILABLE: ": "MODELING_INPUT_UNAVAILABLE: ",
|
|
1156
|
-
"MODELING_INPUT_UNAVAILABLE: source painting and See-through runs — rig-parts build reassembles the parts from the painting (--source) and the runs (--full, --head) before the rig, and the handoff declares none; declare them with rig-review open <dir> --config <path> --source <png> --full <dir> [--head <dir>] or the review.json \"producer\" block": "MODELING_INPUT_UNAVAILABLE: 소스 원화 및 투시(See-through) 실행 — rig-parts build는 리그 생성 전에 원화(--source)와 실행 결과(--full, --head)로부터 파츠를 재조립하지만 핸드오프에 선언되어 있지
|
|
1157
|
-
"MODELING_INPUT_UNAVAILABLE: source painting — propose --from-config reads the painting (--source) and the handoff declares none; declare it with rig-review open <dir> --config <path> --source <png> --full <dir> or the review.json \"producer\" block": "MODELING_INPUT_UNAVAILABLE: 소스 원화 — propose --from-config는 원화(--source)를 읽지만 핸드오프에 선언되어 있지
|
|
1158
|
-
"MODELING_INPUT_UNAVAILABLE: source painting — rig-parts propose reads the painting the parts were assembled from (--source), and the handoff declares none; declare it with rig-review open <dir> --config <path> --source <png> --full <dir> [--head <dir>] or the review.json \"producer\" block": "MODELING_INPUT_UNAVAILABLE: 소스 원화 — rig-parts propose는 파츠가 조립된 원화(--source)를 읽지만 핸드오프에 선언되어 있지
|
|
1161
|
+
"MODELING_INPUT_UNAVAILABLE: source painting and See-through runs — rig-parts build reassembles the parts from the painting (--source) and the runs (--full, --head) before the rig, and the handoff declares none; declare them with rig-review open <dir> --config <path> --source <png> --full <dir> [--head <dir>] or the review.json \"producer\" block": "MODELING_INPUT_UNAVAILABLE: 소스 원화 및 투시(See-through) 실행 — rig-parts build는 리그 생성 전에 원화(--source)와 실행 결과(--full, --head)로부터 파츠를 재조립하지만 핸드오프에 선언되어 있지 않아요. rig-review open <dir> --config <path> --source <png> --full <dir> [--head <dir>] 또는 review.json의 \"producer\" 블록으로 선언하세요",
|
|
1162
|
+
"MODELING_INPUT_UNAVAILABLE: source painting — propose --from-config reads the painting (--source) and the handoff declares none; declare it with rig-review open <dir> --config <path> --source <png> --full <dir> or the review.json \"producer\" block": "MODELING_INPUT_UNAVAILABLE: 소스 원화 — propose --from-config는 원화(--source)를 읽지만 핸드오프에 선언되어 있지 않아요. rig-review open <dir> --config <path> --source <png> --full <dir> 또는 review.json의 \"producer\" 블록으로 선언하세요",
|
|
1163
|
+
"MODELING_INPUT_UNAVAILABLE: source painting — rig-parts propose reads the painting the parts were assembled from (--source), and the handoff declares none; declare it with rig-review open <dir> --config <path> --source <png> --full <dir> [--head <dir>] or the review.json \"producer\" block": "MODELING_INPUT_UNAVAILABLE: 소스 원화 — rig-parts propose는 파츠가 조립된 원화(--source)를 읽지만 핸드오프에 선언되어 있지 않아요. rig-review open <dir> --config <path> --source <png> --full <dir> [--head <dir>] 또는 review.json의 \"producer\" 블록으로 선언하세요",
|
|
1159
1164
|
"MODELING_INPUT_UNAVAILABLE: {0}": "MODELING_INPUT_UNAVAILABLE: {0}",
|
|
1160
1165
|
"MOTION · EDITS BUILD THROUGH THE PRODUCER": "모션 · 프로듀서를 통해 편집 빌드",
|
|
1161
1166
|
"MOTION.BLINK.STILL · A LASH'S STILL ROW": "MOTION.BLINK.STILL · 속눈썹 고정 행",
|
|
1162
1167
|
"Map JSON": "맵 JSON",
|
|
1163
1168
|
"Map JSON (aims, ranges, alternates…)": "맵 JSON (조준, 범위, 대체 항목…)",
|
|
1164
|
-
"Map loaded from {0} (by content; nothing is sent until Apply).": "{0}에서 맵을
|
|
1165
|
-
"Map taken from the JSON field.": "JSON 필드에서 맵을
|
|
1166
|
-
"Maps one inspection axis to its animation time. This does not rotate the camera.": "하나의 검사 축을 애니메이션 시간에
|
|
1169
|
+
"Map loaded from {0} (by content; nothing is sent until Apply).": "{0}에서 맵을 불러왔어요 (내용 기준; 적용 전까지 전송되지 않음).",
|
|
1170
|
+
"Map taken from the JSON field.": "JSON 필드에서 맵을 가져왔어요.",
|
|
1171
|
+
"Maps one inspection axis to its animation time. This does not rotate the camera.": "하나의 검사 축을 애니메이션 시간에 매핑해요. 카메라를 회전시키지 않아요.",
|
|
1167
1172
|
"Margin": "여백(마진)",
|
|
1168
1173
|
"Markers": "마커",
|
|
1169
1174
|
"Max edge": "최대 엣지",
|
|
@@ -1173,9 +1178,9 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1173
1178
|
"Mesh density": "메시 밀도",
|
|
1174
1179
|
"Mesh edges": "메시 엣지",
|
|
1175
1180
|
"Mesh edit": "메시 편집",
|
|
1176
|
-
"Mesh edit is review evidence, not an approval. Nothing was written into the package; retriangulation and regeneration are the producer path.": "메시 편집은 리뷰 근거 자료이며 승인이
|
|
1181
|
+
"Mesh edit is review evidence, not an approval. Nothing was written into the package; retriangulation and regeneration are the producer path.": "메시 편집은 리뷰 근거 자료이며 승인이 아니에요. 패키지에는 아무것도 기록되지 않았으며 재삼각분할 및 재생성은 프로듀서 경로에서 수행해요.",
|
|
1177
1182
|
"Mesh edit sub-mode": "메시 편집 세부 모드",
|
|
1178
|
-
"Mesh optimization requires an eligible producer handoff. This inspection changes no source art, geometry or motion.": "메시 최적화에는 적격한 프로듀서 핸드오프가
|
|
1183
|
+
"Mesh optimization requires an eligible producer handoff. This inspection changes no source art, geometry or motion.": "메시 최적화에는 적격한 프로듀서 핸드오프가 필요해요. 이 점검은 소스 아트, 지오메트리 또는 모션을 변경하지 않아요.",
|
|
1179
1184
|
"Mesh overlay unavailable: {0}": "메시 오버레이 사용 불가: {0}",
|
|
1180
1185
|
"Mesh overlay {0}: incomplete coordinates or triangle": "메시 오버레이 {0}: 불완전한 좌표 또는 삼각형",
|
|
1181
1186
|
"Mesh overlay {0}: nonfinite posed vertex": "메시 오버레이 {0}: 유한하지 않은 포즈 정점",
|
|
@@ -1186,7 +1191,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1186
1191
|
"Mesh {0} {1}": "메시 {0} {1}",
|
|
1187
1192
|
"Method not allowed": "허용되지 않는 메서드",
|
|
1188
1193
|
"Mirror R → L": "R → L 대칭 복사",
|
|
1189
|
-
"Mirror needs a complete R circle and an L x.": "대칭 복사에는 완성된 우측(R) 원과 좌측(L) x 좌표가
|
|
1194
|
+
"Mirror needs a complete R circle and an L x.": "대칭 복사에는 완성된 우측(R) 원과 좌측(L) x 좌표가 필요해요.",
|
|
1190
1195
|
"Missing UI element: {0}": "누락된 UI 요소: {0}",
|
|
1191
1196
|
"Missing compare UI element: {0}": "누락된 비교 UI 요소: {0}",
|
|
1192
1197
|
"Missing workspace element: ": "누락된 워크스페이스 요소: ",
|
|
@@ -1194,21 +1199,21 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1194
1199
|
"Mode": "모드",
|
|
1195
1200
|
"Model page escapes its build: {0}": "모델 페이지가 빌드 경로를 벗어남: {0}",
|
|
1196
1201
|
"Model page escapes local package: {0}": "모델 페이지가 로컬 패키지를 벗어남: {0}",
|
|
1197
|
-
"Model {0} changed while hashing; retry with stable package inputs": "해싱 중 모델 {0}이(가)
|
|
1202
|
+
"Model {0} changed while hashing; retry with stable package inputs": "해싱 중 모델 {0}이(가) 변경됐어요. 안정된 패키지 입력으로 다시 시도하세요",
|
|
1198
1203
|
"Modeling": "모델링",
|
|
1199
1204
|
"Modify": "수정",
|
|
1200
1205
|
"Modify · key V": "수정 · 단축키 V",
|
|
1201
|
-
"Motion is read only. The reference video FPS is not used to infer the pose frame clock.": "모션은 읽기
|
|
1202
|
-
"Motion source \"{0}\" is not a valid {1} document.": "모션 소스 \"{0}\"이(가) 유효한 {1} 문서가
|
|
1206
|
+
"Motion is read only. The reference video FPS is not used to infer the pose frame clock.": "모션은 읽기 전용이에요. 레퍼런스 비디오 FPS는 포즈 프레임 클럭 추론에 사용되지 않아요.",
|
|
1207
|
+
"Motion source \"{0}\" is not a valid {1} document.": "모션 소스 \"{0}\"이(가) 유효한 {1} 문서가 아니에요.",
|
|
1203
1208
|
"Move": "이동",
|
|
1204
1209
|
"Move over the rig · left/right yaw and body · up/down pitch": "리그 위에서 이동 · 좌/우 회전(yaw) 및 몸통 · 상/하 기울기(pitch)",
|
|
1205
1210
|
"Moved {0} selected key(s) by {1} s ({2} pending op(s)).": "선택한 키 {0}개를 {1}초 이동함 (보류 중인 작업 {2}개).",
|
|
1206
|
-
"N must be a whole number {0}–{1}, and A and B numbers": "N은 {0}–{1} 범위의 정수여야 하며 A와 B는 숫자여야
|
|
1211
|
+
"N must be a whole number {0}–{1}, and A and B numbers": "N은 {0}–{1} 범위의 정수여야 하며 A와 B는 숫자여야 해요",
|
|
1207
1212
|
"NAME (letters, digits, _)": "이름 (영문자, 숫자, _)",
|
|
1208
1213
|
"NOT EDITABLE · {0}": "편집 불가 · {0}",
|
|
1209
1214
|
"NOT MEASURABLE": "측정 불가",
|
|
1210
1215
|
"Name": "이름",
|
|
1211
|
-
"Named vertex weights and original source alpha unavailable in this inspection. A packed page is not original part art.": "이 점검에서는 이름이 지정된 정점 가중치와 원본 소스 알파를 사용할 수
|
|
1216
|
+
"Named vertex weights and original source alpha unavailable in this inspection. A packed page is not original part art.": "이 점검에서는 이름이 지정된 정점 가중치와 원본 소스 알파를 사용할 수 없어요. 패킹된 페이지는 원본 파츠 아트가 아니에요.",
|
|
1212
1217
|
"Needs changes": "변경 필요",
|
|
1213
1218
|
"New animation name": "새 애니메이션 이름",
|
|
1214
1219
|
"New part name": "새 파츠 이름",
|
|
@@ -1216,57 +1221,57 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1216
1221
|
"Newer reference seek requested": "더 새로운 레퍼런스 탐색이 요청됨",
|
|
1217
1222
|
"Next": "다음",
|
|
1218
1223
|
"Next event page": "다음 이벤트 페이지",
|
|
1219
|
-
"Next-reference timing unknown: an adjacent decoded timestamp and positive playback rate are required. Playback continues; pause for exact inspection.": "다음 레퍼런스 타이밍 알 수 없음: 인접한 디코딩 타임스탬프와 양수 재생 속도가
|
|
1220
|
-
"No Apply is on the stage": "스테이지에 적용된 항목이
|
|
1221
|
-
"No FEET / STANCE / FLIP / SHORT / END-ON / LEG-SCALE / REACH line in this run (FEET needs both legs mapped; FLIP and SHORT their flags).": "이번 실행에 FEET / STANCE / FLIP / SHORT / END-ON / LEG-SCALE / REACH 줄이
|
|
1224
|
+
"Next-reference timing unknown: an adjacent decoded timestamp and positive playback rate are required. Playback continues; pause for exact inspection.": "다음 레퍼런스 타이밍 알 수 없음: 인접한 디코딩 타임스탬프와 양수 재생 속도가 필요해요. 재생은 계속되며 정확한 점검을 위해 일시정지하세요.",
|
|
1225
|
+
"No Apply is on the stage": "스테이지에 적용된 항목이 없어요",
|
|
1226
|
+
"No FEET / STANCE / FLIP / SHORT / END-ON / LEG-SCALE / REACH line in this run (FEET needs both legs mapped; FLIP and SHORT their flags).": "이번 실행에 FEET / STANCE / FLIP / SHORT / END-ON / LEG-SCALE / REACH 줄이 없어요 (FEET는 양다리 매핑 필요, FLIP 및 SHORT는 해당 플래그 필요).",
|
|
1222
1227
|
"No active drawable attachment: ": "활성 드로어블 어태치먼트 없음: ",
|
|
1223
1228
|
"No active drawable attachment: {0}": "그릴 수 있는 활성 어태치먼트 없음: {0}",
|
|
1224
|
-
"No animation selected.": "선택된 애니메이션이
|
|
1229
|
+
"No animation selected.": "선택된 애니메이션이 없어요.",
|
|
1225
1230
|
"No animations supplied": "제공된 애니메이션 없음",
|
|
1226
1231
|
"No base": "베이스 없음",
|
|
1227
1232
|
"No bone/slot mapping": "본/슬롯 매핑 없음",
|
|
1228
1233
|
"No bone/slot mapping · choose a target manually.": "본/슬롯 매핑 없음 · 대상을 직접 선택하세요.",
|
|
1229
|
-
"No bones in the config": "설정에 본이
|
|
1234
|
+
"No bones in the config": "설정에 본이 없어요",
|
|
1230
1235
|
"No chain": "체인 없음",
|
|
1231
|
-
"No chain of two or more links": "링크가 2개 이상인 체인이
|
|
1236
|
+
"No chain of two or more links": "링크가 2개 이상인 체인이 없어요",
|
|
1232
1237
|
"No checkpoint supplied": "제공된 체크포인트 없음",
|
|
1233
|
-
"No checkpoints supplied.": "제공된 체크포인트가
|
|
1238
|
+
"No checkpoints supplied.": "제공된 체크포인트가 없어요.",
|
|
1234
1239
|
"No compiled model drawn · environment unavailable": "그려진 컴파일 모델 없음 · 환경 사용 불가",
|
|
1235
|
-
"No compiled model drawn.": "그려진 컴파일 모델이
|
|
1236
|
-
"No compiled model supplied.": "제공된 컴파일 모델이
|
|
1240
|
+
"No compiled model drawn.": "그려진 컴파일 모델이 없어요.",
|
|
1241
|
+
"No compiled model supplied.": "제공된 컴파일 모델이 없어요.",
|
|
1237
1242
|
"No compiled rig catalog available": "사용 가능한 컴파일된 리그 카탈로그 없음",
|
|
1238
1243
|
"No editable tracks": "편집 가능한 트랙 없음",
|
|
1239
|
-
"No events supplied.": "제공된 이벤트가
|
|
1240
|
-
"No feedback ranges to export.": "내보낼 피드백 범위가
|
|
1244
|
+
"No events supplied.": "제공된 이벤트가 없어요.",
|
|
1245
|
+
"No feedback ranges to export.": "내보낼 피드백 범위가 없어요.",
|
|
1241
1246
|
"No frame data · enter the range manually.": "프레임 데이터 없음 · 범위를 직접 입력하세요.",
|
|
1242
|
-
"No frame presented yet.": "아직 표시된 프레임이
|
|
1243
|
-
"No frames overlap the explicit clock and selected clip.": "명시적 클록 및 선택된 클립과 겹치는 프레임이
|
|
1247
|
+
"No frame presented yet.": "아직 표시된 프레임이 없어요.",
|
|
1248
|
+
"No frames overlap the explicit clock and selected clip.": "명시적 클록 및 선택된 클립과 겹치는 프레임이 없어요.",
|
|
1244
1249
|
"No input rendered · {0}": "렌더링된 입력 없음 · {0}",
|
|
1245
1250
|
"No inspection axes supplied": "제공된 점검 축 없음",
|
|
1246
1251
|
"No key selected": "선택된 키 없음",
|
|
1247
|
-
"No linked sound cues.": "연결된 사운드 큐가
|
|
1248
|
-
"No mesh part selected.": "선택된 메시 파츠가
|
|
1252
|
+
"No linked sound cues.": "연결된 사운드 큐가 없어요.",
|
|
1253
|
+
"No mesh part selected.": "선택된 메시 파츠가 없어요.",
|
|
1249
1254
|
"No mesh · DOM images": "메시 없음 · DOM 이미지",
|
|
1250
1255
|
"No model bones": "모델 본 없음",
|
|
1251
|
-
"No pending ops.": "보류 중인 작업이
|
|
1256
|
+
"No pending ops.": "보류 중인 작업이 없어요.",
|
|
1252
1257
|
"No person selected": "선택된 인물 없음",
|
|
1253
|
-
"No reference supplied.": "제공된 레퍼런스가
|
|
1258
|
+
"No reference supplied.": "제공된 레퍼런스가 없어요.",
|
|
1254
1259
|
"No references supplied": "제공된 레퍼런스 없음",
|
|
1255
|
-
"No region part rides a bone the blink's eyes name ({0}).": "눈 깜빡임의 눈({0})이 지정한 본을 따르는 영역 파츠가
|
|
1256
|
-
"No regions. Add a circle, or draw a polygon on the stage.": "영역이
|
|
1260
|
+
"No region part rides a bone the blink's eyes name ({0}).": "눈 깜빡임의 눈({0})이 지정한 본을 따르는 영역 파츠가 없어요.",
|
|
1261
|
+
"No regions. Add a circle, or draw a polygon on the stage.": "영역이 없어요. 원을 추가하거나 스테이지에서 다각형을 그리세요.",
|
|
1257
1262
|
"No rig supplied": "제공된 리그 없음",
|
|
1258
1263
|
"No rig supplied · reference review is available": "제공된 리그 없음 · 레퍼런스 리뷰 사용 가능",
|
|
1259
|
-
"No rig supplied. Review the available references and checkpoints.": "제공된 리그가
|
|
1260
|
-
"No rig-pose-report/1 events supplied.": "제공된 rig-pose-report/1 이벤트가
|
|
1264
|
+
"No rig supplied. Review the available references and checkpoints.": "제공된 리그가 없어요. 사용 가능한 레퍼런스 및 체크포인트를 리뷰하세요.",
|
|
1265
|
+
"No rig-pose-report/1 events supplied.": "제공된 rig-pose-report/1 이벤트가 없어요.",
|
|
1261
1266
|
"No schedule · the controls are not applied (the player stands at the runtime start values)": "스케줄 없음 · 컨트롤이 적용되지 않음 (플레이어가 런타임 시작 값에 머무름)",
|
|
1262
1267
|
"No second build supplied: reopen with --compare <built> --reference <video>": "두 번째 빌드가 제공되지 않음: --compare <built> --reference <video>로 다시 여세요",
|
|
1263
1268
|
"No second build supplied: reopen with --compare <built> --reference <video>": "두 번째 빌드가 제공되지 않음: --compare <built> --reference <video> 옵션으로 다시 여세요",
|
|
1264
1269
|
"No segments": "세그먼트 없음",
|
|
1265
1270
|
"No sets supplied": "제공된 세트 없음",
|
|
1266
1271
|
"No source files supplied": "제공된 소스 파일 없음",
|
|
1267
|
-
"No stored tracks for this selection.": "이 선택에 대해 저장된 트랙이
|
|
1268
|
-
"No tag to edit.": "편집할 태그가
|
|
1269
|
-
"No targets of this type.": "이 유형의 대상이
|
|
1272
|
+
"No stored tracks for this selection.": "이 선택에 대해 저장된 트랙이 없어요.",
|
|
1273
|
+
"No tag to edit.": "편집할 태그가 없어요.",
|
|
1274
|
+
"No targets of this type.": "이 유형의 대상이 없어요.",
|
|
1270
1275
|
"No time data — cannot seek": "시간 데이터 없음 — 탐색할 수 없음",
|
|
1271
1276
|
"No time mapping — cannot seek": "시간 매핑 없음 — 탐색할 수 없음",
|
|
1272
1277
|
"Non-idle inspection · no automatic playback": "비아이들 점검 · 자동 재생 안 함",
|
|
@@ -1278,7 +1283,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1278
1283
|
"Not submitted": "제출되지 않음",
|
|
1279
1284
|
"Not supplied": "제공되지 않음",
|
|
1280
1285
|
"Number of values": "값 개수",
|
|
1281
|
-
"Numeric source region · opening this link restores a paused inspection": "수치 소스 영역 · 이 링크를 열면 일시정지된 검사가
|
|
1286
|
+
"Numeric source region · opening this link restores a paused inspection": "수치 소스 영역 · 이 링크를 열면 일시정지된 검사가 복원돼요",
|
|
1282
1287
|
"OVERLAP {0} under {1}": "{1} 아래 겹침(OVERLAP) {0}",
|
|
1283
1288
|
"Off": "끔",
|
|
1284
1289
|
"On": "켬",
|
|
@@ -1298,74 +1303,74 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1298
1303
|
"Original painting": "원본 그림",
|
|
1299
1304
|
"Original set": "원본 세트",
|
|
1300
1305
|
"Other bones": "기타 본",
|
|
1301
|
-
"Output folder: no recognized skeleton.*, build/skeleton.model.json, rig-parts build root (check/build/skeleton.model.json), motion.json, report.json, source video, pose sequence or contact strip": "출력 폴더: 인식된 skeleton.*, build/skeleton.model.json, rig-parts 빌드 루트(check/build/skeleton.model.json), motion.json, report.json, 소스 비디오, 포즈 시퀀스 또는 컨택트 스트립이
|
|
1306
|
+
"Output folder: no recognized skeleton.*, build/skeleton.model.json, rig-parts build root (check/build/skeleton.model.json), motion.json, report.json, source video, pose sequence or contact strip": "출력 폴더: 인식된 skeleton.*, build/skeleton.model.json, rig-parts 빌드 루트(check/build/skeleton.model.json), motion.json, report.json, 소스 비디오, 포즈 시퀀스 또는 컨택트 스트립이 없어요",
|
|
1302
1307
|
"Overlaps": "겹침(오버랩)",
|
|
1303
|
-
"Overlay has been disposed": "오버레이가
|
|
1304
|
-
"Overlay pending: a successful rig draw is required for the selected layers": "오버레이 보류 중: 선택한 레이어를 표시하려면 리그 그리기가 성공해야
|
|
1305
|
-
"Overlay projection returned nonfinite coordinates": "오버레이 투영이 유한하지 않은 좌표를
|
|
1308
|
+
"Overlay has been disposed": "오버레이가 해제됐어요",
|
|
1309
|
+
"Overlay pending: a successful rig draw is required for the selected layers": "오버레이 보류 중: 선택한 레이어를 표시하려면 리그 그리기가 성공해야 해요",
|
|
1310
|
+
"Overlay projection returned nonfinite coordinates": "오버레이 투영이 유한하지 않은 좌표를 반환했어요",
|
|
1306
1311
|
"Overlay unavailable: Canvas2D context missing": "오버레이 사용 불가: Canvas2D 컨텍스트 누락",
|
|
1307
1312
|
"Overlay unavailable: no successfully drawn rig pose": "오버레이 사용 불가: 성공적으로 그려진 리그 포즈 없음",
|
|
1308
|
-
"Overlay unavailable: positive finite pixel ratio required": "오버레이 사용 불가: 양의 유한 픽셀 비율이
|
|
1313
|
+
"Overlay unavailable: positive finite pixel ratio required": "오버레이 사용 불가: 양의 유한 픽셀 비율이 필요해요",
|
|
1309
1314
|
"PARTS": "파츠",
|
|
1310
1315
|
"PARTS_UNAVAILABLE: {0} / {1}": "PARTS_UNAVAILABLE: {0} / {1}",
|
|
1311
|
-
"PART_FIT_UNAVAILABLE: no positive drawn bounds at the held pose.": "PART_FIT_UNAVAILABLE: 유지된 포즈에 양수의 그려진 경계가
|
|
1312
|
-
"PART_FIT_UNAVAILABLE: positive finite drawn bounds required": "PART_FIT_UNAVAILABLE: 양의 유한한 그려진 경계가
|
|
1313
|
-
"PART_FIT_UNAVAILABLE: selected slot has no positive drawn bounds.": "PART_FIT_UNAVAILABLE: 선택한 슬롯에 양수의 그려진 경계가
|
|
1314
|
-
"PART_FIT_UNAVAILABLE: viewport has no usable extent": "PART_FIT_UNAVAILABLE: 뷰포트에 사용 가능한 영역이
|
|
1315
|
-
"PART_IDENTITY_FRAME_MISMATCH: slot \"{0}\" does not match held frame order": "PART_IDENTITY_FRAME_MISMATCH: 슬롯 \"{0}\"이(가) 유지된 프레임 순서와 일치하지
|
|
1316
|
-
"PART_IDENTITY_MISMATCH: {0} / {1} no longer resolves the bookmarked skin/attachment/set/reason": "PART_IDENTITY_MISMATCH: {0} / {1}이(가) 북마크된 스킨/어태치먼트/세트/사유를 더 이상 해석하지
|
|
1317
|
-
"PART_IDENTITY_SHAPE: resolved key/owning skin or explicit null reason required": "PART_IDENTITY_SHAPE: 해석된 키/소유 스킨 또는 명시적 null 사유가
|
|
1318
|
-
"PART_IDENTITY_SOURCE_CHANGED: slot \"{0}\" has unknown, repeated or noncontiguous z {1}": "PART_IDENTITY_SOURCE_CHANGED: 슬롯 \"{0}\"에 알 수 없거나 중복되었거나 불연속적인 z {1}이(가)
|
|
1319
|
-
"PART_IDENTITY_SOURCE_CHANGED: snapshot slot count differs from reviewed catalog": "PART_IDENTITY_SOURCE_CHANGED: 스냅샷 슬롯 수가 리뷰된 카탈로그와
|
|
1320
|
-
"PART_IDENTITY_STALE: held frame and public slot identity generations differ": "PART_IDENTITY_STALE: 유지된 프레임과 공개 슬롯 식별 세대가
|
|
1321
|
-
"PART_IDENTITY_UNAVAILABLE: no held public identity snapshot": "PART_IDENTITY_UNAVAILABLE: 유지된 공개 식별 스냅샷이
|
|
1322
|
-
"PART_IDENTITY_UNAVAILABLE: {0} / {1} has no held public snapshot": "PART_IDENTITY_UNAVAILABLE: {0} / {1}에 유지된 공개 스냅샷이
|
|
1323
|
-
"PART_SOURCE_CHANGED: model bytes differ from reviewed SHA-256": "PART_SOURCE_CHANGED: 모델 바이트가 리뷰된 SHA-256과
|
|
1324
|
-
"PART_SOURCE_CHANGED: slot catalog differs from reviewed model": "PART_SOURCE_CHANGED: 슬롯 카탈로그가 리뷰된 모델과
|
|
1316
|
+
"PART_FIT_UNAVAILABLE: no positive drawn bounds at the held pose.": "PART_FIT_UNAVAILABLE: 유지된 포즈에 양수의 그려진 경계가 없어요.",
|
|
1317
|
+
"PART_FIT_UNAVAILABLE: positive finite drawn bounds required": "PART_FIT_UNAVAILABLE: 양의 유한한 그려진 경계가 필요해요",
|
|
1318
|
+
"PART_FIT_UNAVAILABLE: selected slot has no positive drawn bounds.": "PART_FIT_UNAVAILABLE: 선택한 슬롯에 양수의 그려진 경계가 없어요.",
|
|
1319
|
+
"PART_FIT_UNAVAILABLE: viewport has no usable extent": "PART_FIT_UNAVAILABLE: 뷰포트에 사용 가능한 영역이 없어요",
|
|
1320
|
+
"PART_IDENTITY_FRAME_MISMATCH: slot \"{0}\" does not match held frame order": "PART_IDENTITY_FRAME_MISMATCH: 슬롯 \"{0}\"이(가) 유지된 프레임 순서와 일치하지 않아요",
|
|
1321
|
+
"PART_IDENTITY_MISMATCH: {0} / {1} no longer resolves the bookmarked skin/attachment/set/reason": "PART_IDENTITY_MISMATCH: {0} / {1}이(가) 북마크된 스킨/어태치먼트/세트/사유를 더 이상 해석하지 못해요",
|
|
1322
|
+
"PART_IDENTITY_SHAPE: resolved key/owning skin or explicit null reason required": "PART_IDENTITY_SHAPE: 해석된 키/소유 스킨 또는 명시적 null 사유가 필요해요",
|
|
1323
|
+
"PART_IDENTITY_SOURCE_CHANGED: slot \"{0}\" has unknown, repeated or noncontiguous z {1}": "PART_IDENTITY_SOURCE_CHANGED: 슬롯 \"{0}\"에 알 수 없거나 중복되었거나 불연속적인 z {1}이(가) 있어요",
|
|
1324
|
+
"PART_IDENTITY_SOURCE_CHANGED: snapshot slot count differs from reviewed catalog": "PART_IDENTITY_SOURCE_CHANGED: 스냅샷 슬롯 수가 리뷰된 카탈로그와 달라요",
|
|
1325
|
+
"PART_IDENTITY_STALE: held frame and public slot identity generations differ": "PART_IDENTITY_STALE: 유지된 프레임과 공개 슬롯 식별 세대가 달라요",
|
|
1326
|
+
"PART_IDENTITY_UNAVAILABLE: no held public identity snapshot": "PART_IDENTITY_UNAVAILABLE: 유지된 공개 식별 스냅샷이 없어요",
|
|
1327
|
+
"PART_IDENTITY_UNAVAILABLE: {0} / {1} has no held public snapshot": "PART_IDENTITY_UNAVAILABLE: {0} / {1}에 유지된 공개 스냅샷이 없어요",
|
|
1328
|
+
"PART_SOURCE_CHANGED: model bytes differ from reviewed SHA-256": "PART_SOURCE_CHANGED: 모델 바이트가 리뷰된 SHA-256과 달라요",
|
|
1329
|
+
"PART_SOURCE_CHANGED: slot catalog differs from reviewed model": "PART_SOURCE_CHANGED: 슬롯 카탈로그가 리뷰된 모델과 달라요",
|
|
1325
1330
|
"PART_UNAVAILABLE: {0} / {1}": "PART_UNAVAILABLE: {0} / {1}",
|
|
1326
1331
|
"PENDING ENTRY · DIFF AGAINST THE CONFIG": "대기 항목 · 설정 대비 변경점",
|
|
1327
1332
|
"PENDING OPS": "대기 중인 연산",
|
|
1328
1333
|
"PHYSICS TUNING · APPLY REBUILDS": "물리 튜닝 · 적용 시 리빌드",
|
|
1329
|
-
"PHYSICS_CHAIN_NONE: no chain link bone within 24 px of the click": "PHYSICS_CHAIN_NONE: 클릭 위치에서 24 px 이내에 체인 링크 본이
|
|
1334
|
+
"PHYSICS_CHAIN_NONE: no chain link bone within 24 px of the click": "PHYSICS_CHAIN_NONE: 클릭 위치에서 24 px 이내에 체인 링크 본이 없어요",
|
|
1330
1335
|
"PHYSICS_CHAIN_NONE: select a chain first": "PHYSICS_CHAIN_NONE: 먼저 체인을 선택하세요",
|
|
1331
|
-
"PHYSICS_CHAIN_SHORT: a ramp needs two or more links": "PHYSICS_CHAIN_SHORT: 램프에는 2개 이상의 링크가
|
|
1336
|
+
"PHYSICS_CHAIN_SHORT: a ramp needs two or more links": "PHYSICS_CHAIN_SHORT: 램프에는 2개 이상의 링크가 필요해요",
|
|
1332
1337
|
"PHYSICS_CHAIN_UNKNOWN: {0}": "PHYSICS_CHAIN_UNKNOWN: {0}",
|
|
1333
|
-
"PHYSICS_CONSTRAINTS_UNAVAILABLE: a physics constraint has no name": "PHYSICS_CONSTRAINTS_UNAVAILABLE: 이름이 없는 물리 제약 조건이
|
|
1334
|
-
"PHYSICS_CONSTRAINTS_UNAVAILABLE: model declares no constraints list": "PHYSICS_CONSTRAINTS_UNAVAILABLE: 모델에 선언된 제약 조건 목록이
|
|
1335
|
-
"PHYSICS_CONSTRAINTS_UNAVAILABLE: model declares no physics constraints": "PHYSICS_CONSTRAINTS_UNAVAILABLE: 모델에 선언된 물리 제약 조건이
|
|
1336
|
-
"PHYSICS_CONSTRAINTS_UNAVAILABLE: model document is not an object": "PHYSICS_CONSTRAINTS_UNAVAILABLE: 모델 문서가 객체가
|
|
1338
|
+
"PHYSICS_CONSTRAINTS_UNAVAILABLE: a physics constraint has no name": "PHYSICS_CONSTRAINTS_UNAVAILABLE: 이름이 없는 물리 제약 조건이 있어요",
|
|
1339
|
+
"PHYSICS_CONSTRAINTS_UNAVAILABLE: model declares no constraints list": "PHYSICS_CONSTRAINTS_UNAVAILABLE: 모델에 선언된 제약 조건 목록이 없어요",
|
|
1340
|
+
"PHYSICS_CONSTRAINTS_UNAVAILABLE: model declares no physics constraints": "PHYSICS_CONSTRAINTS_UNAVAILABLE: 모델에 선언된 물리 제약 조건이 없어요",
|
|
1341
|
+
"PHYSICS_CONSTRAINTS_UNAVAILABLE: model document is not an object": "PHYSICS_CONSTRAINTS_UNAVAILABLE: 모델 문서가 객체가 아니에요",
|
|
1337
1342
|
"PHYSICS_CONSTRAINTS_UNAVAILABLE: {0}": "PHYSICS_CONSTRAINTS_UNAVAILABLE: {0}",
|
|
1338
1343
|
"PHYSICS_FIELD_UNKNOWN: {0}": "PHYSICS_FIELD_UNKNOWN: {0}",
|
|
1339
|
-
"PHYSICS_NOTHING_PENDING: no pending ops": "PHYSICS_NOTHING_PENDING: 보류 중인 작업이
|
|
1340
|
-
"PHYSICS_PREVIEW_UNAVAILABLE: no live player": "PHYSICS_PREVIEW_UNAVAILABLE: 라이브 플레이어가
|
|
1344
|
+
"PHYSICS_NOTHING_PENDING: no pending ops": "PHYSICS_NOTHING_PENDING: 보류 중인 작업이 없어요",
|
|
1345
|
+
"PHYSICS_PREVIEW_UNAVAILABLE: no live player": "PHYSICS_PREVIEW_UNAVAILABLE: 라이브 플레이어가 없어요",
|
|
1341
1346
|
"PHYSICS_ROW_NOT_EDITABLE: {0}": "PHYSICS_ROW_NOT_EDITABLE: {0}",
|
|
1342
|
-
"PHYSICS_ROW_NOT_IN_MODEL: config.constraints[{0}] {1} \"{2}\" is not in the inspected model": "PHYSICS_ROW_NOT_IN_MODEL: config.constraints[{0}] {1} \"{2}\"이(가) 점검 중인 모델에
|
|
1343
|
-
"PHYSICS_ROW_NOT_PHYSICS: config.constraints[{0}] is a {1} constraint; this panel tunes physics constraints only": "PHYSICS_ROW_NOT_PHYSICS: config.constraints[{0}]은(는) {1} 제약
|
|
1344
|
-
"PHYSICS_ROW_UNDECLARED: the model has {0} \"{1}\" but config.constraints does not declare it; it was added at the rig stage (e.g. the `turn` twins), so there is no config field to patch": "PHYSICS_ROW_UNDECLARED: 모델에 {0} \"{1}\"이(가) 있으나 config.constraints에 선언되어 있지
|
|
1347
|
+
"PHYSICS_ROW_NOT_IN_MODEL: config.constraints[{0}] {1} \"{2}\" is not in the inspected model": "PHYSICS_ROW_NOT_IN_MODEL: config.constraints[{0}] {1} \"{2}\"이(가) 점검 중인 모델에 없어요",
|
|
1348
|
+
"PHYSICS_ROW_NOT_PHYSICS: config.constraints[{0}] is a {1} constraint; this panel tunes physics constraints only": "PHYSICS_ROW_NOT_PHYSICS: config.constraints[{0}]은(는) {1} 제약 조건이에요. 이 패널은 물리 제약 조건만 조정해요",
|
|
1349
|
+
"PHYSICS_ROW_UNDECLARED: the model has {0} \"{1}\" but config.constraints does not declare it; it was added at the rig stage (e.g. the `turn` twins), so there is no config field to patch": "PHYSICS_ROW_UNDECLARED: 모델에 {0} \"{1}\"이(가) 있으나 config.constraints에 선언되어 있지 않아요. 리그 단계에서 추가된 항목(예: `turn` 쌍)이므로 패치할 설정 필드가 없어요",
|
|
1345
1350
|
"PHYSICS_ROW_UNKNOWN: {0}": "PHYSICS_ROW_UNKNOWN: {0}",
|
|
1346
|
-
"PHYSICS_ROW_UNMAPPED: config.constraints[{0}].{1} is {2}, the model holds {3}; the config does not map 1:1 onto this row": "PHYSICS_ROW_UNMAPPED: config.constraints[{0}].{1}은(는) {2}이지만 모델은 {3}을(를) 가지므로 설정이 이 행에 1:1로 매핑되지
|
|
1347
|
-
"PHYSICS_TUNING_UNAVAILABLE: no producer handoff": "PHYSICS_TUNING_UNAVAILABLE: 프로듀서 핸드오프가
|
|
1348
|
-
"PHYSICS_TUNING_UNAVAILABLE: no reviewed rig identity": "PHYSICS_TUNING_UNAVAILABLE: 리뷰된 리그 식별 정보가
|
|
1349
|
-
"PHYSICS_TUNING_UNAVAILABLE: the handoff config has no constraints list": "PHYSICS_TUNING_UNAVAILABLE: 핸드오프 설정에 제약 조건 목록이
|
|
1350
|
-
"PHYSICS_TUNING_UNAVAILABLE: the inspected model declares no constraints list": "PHYSICS_TUNING_UNAVAILABLE: 점검 중인 모델에 선언된 제약 조건 목록이
|
|
1351
|
+
"PHYSICS_ROW_UNMAPPED: config.constraints[{0}].{1} is {2}, the model holds {3}; the config does not map 1:1 onto this row": "PHYSICS_ROW_UNMAPPED: config.constraints[{0}].{1}은(는) {2}이지만 모델은 {3}을(를) 가지므로 설정이 이 행에 1:1로 매핑되지 않아요",
|
|
1352
|
+
"PHYSICS_TUNING_UNAVAILABLE: no producer handoff": "PHYSICS_TUNING_UNAVAILABLE: 프로듀서 핸드오프가 없어요",
|
|
1353
|
+
"PHYSICS_TUNING_UNAVAILABLE: no reviewed rig identity": "PHYSICS_TUNING_UNAVAILABLE: 리뷰된 리그 식별 정보가 없어요",
|
|
1354
|
+
"PHYSICS_TUNING_UNAVAILABLE: the handoff config has no constraints list": "PHYSICS_TUNING_UNAVAILABLE: 핸드오프 설정에 제약 조건 목록이 없어요",
|
|
1355
|
+
"PHYSICS_TUNING_UNAVAILABLE: the inspected model declares no constraints list": "PHYSICS_TUNING_UNAVAILABLE: 점검 중인 모델에 선언된 제약 조건 목록이 없어요",
|
|
1351
1356
|
"PHYSICS_TUNING_UNAVAILABLE: {0}": "PHYSICS_TUNING_UNAVAILABLE: {0}",
|
|
1352
|
-
"PHYSICS_VALUE_INVALID: the ramp needs a finite root and tip value": "PHYSICS_VALUE_INVALID: 램프에는 유한한 루트 및 팁 값이
|
|
1353
|
-
"PHYSICS_VALUE_INVALID: {0}.{1} must be a finite number": "PHYSICS_VALUE_INVALID: {0}.{1}은(는) 유한한 숫자여야
|
|
1354
|
-
"PNG requires frameTimes in the selected report. Without it, JSON preserves requested frames with time: null. Batch export requires every feedback item to match the selected animation. Unsubmitted feedback is included; exporting does not submit the review.": "PNG는 선택된 리포트에 frameTimes가
|
|
1357
|
+
"PHYSICS_VALUE_INVALID: the ramp needs a finite root and tip value": "PHYSICS_VALUE_INVALID: 램프에는 유한한 루트 및 팁 값이 필요해요",
|
|
1358
|
+
"PHYSICS_VALUE_INVALID: {0}.{1} must be a finite number": "PHYSICS_VALUE_INVALID: {0}.{1}은(는) 유한한 숫자여야 해요",
|
|
1359
|
+
"PNG requires frameTimes in the selected report. Without it, JSON preserves requested frames with time: null. Batch export requires every feedback item to match the selected animation. Unsubmitted feedback is included; exporting does not submit the review.": "PNG는 선택된 리포트에 frameTimes가 필요해요. 없으면 JSON은 요청된 프레임을 time: null로 보존해요. 일괄 내보내기는 모든 피드백 항목이 선택된 애니메이션과 일치해야 해요. 미제출 피드백도 포함되며 내보내기는 리뷰를 제출하지 않아요.",
|
|
1355
1360
|
"PNG strip": "PNG 스트립",
|
|
1356
|
-
"PREFERENCES_LANGUAGE: expected system, en or ko": "PREFERENCES_LANGUAGE: system, en 또는 ko여야
|
|
1357
|
-
"PREFERENCES_PANEL: {0} requires finite {1}..{2} CSS pixels": "PREFERENCES_PANEL: {0}에는 유한한 {1}..{2} CSS 픽셀이
|
|
1358
|
-
"PREFERENCES_REVISION: record revision must equal maximum field revision": "PREFERENCES_REVISION: 레코드 리비전은 최대 필드 리비전과 같아야
|
|
1359
|
-
"PREFERENCES_SIZE: record exceeds 8192 characters": "PREFERENCES_SIZE: 레코드가 8192자를
|
|
1361
|
+
"PREFERENCES_LANGUAGE: expected system, en or ko": "PREFERENCES_LANGUAGE: system, en 또는 ko여야 해요",
|
|
1362
|
+
"PREFERENCES_PANEL: {0} requires finite {1}..{2} CSS pixels": "PREFERENCES_PANEL: {0}에는 유한한 {1}..{2} CSS 픽셀이 필요해요",
|
|
1363
|
+
"PREFERENCES_REVISION: record revision must equal maximum field revision": "PREFERENCES_REVISION: 레코드 리비전은 최대 필드 리비전과 같아야 해요",
|
|
1364
|
+
"PREFERENCES_SIZE: record exceeds 8192 characters": "PREFERENCES_SIZE: 레코드가 8192자를 초과해요",
|
|
1360
1365
|
"PREFERENCES_STAMP: invalid {0} revision/writer": "PREFERENCES_STAMP: 유효하지 않은 {0} 리비전/작성자",
|
|
1361
|
-
"PREFERENCES_STAMP: unstamped {0} differs from defaults": "PREFERENCES_STAMP: 스탬프 없는 {0}이(가) 기본값과
|
|
1362
|
-
"PREFERENCES_STAMP_CONFLICT: {0} has two values at one stamp": "PREFERENCES_STAMP_CONFLICT: 하나의 스탬프에서 {0}에 두 개의 값이
|
|
1363
|
-
"PREFERENCES_THEME: expected system, dark or light": "PREFERENCES_THEME: system, dark 또는 light여야
|
|
1366
|
+
"PREFERENCES_STAMP: unstamped {0} differs from defaults": "PREFERENCES_STAMP: 스탬프 없는 {0}이(가) 기본값과 달라요",
|
|
1367
|
+
"PREFERENCES_STAMP_CONFLICT: {0} has two values at one stamp": "PREFERENCES_STAMP_CONFLICT: 하나의 스탬프에서 {0}에 두 개의 값이 있어요",
|
|
1368
|
+
"PREFERENCES_THEME: expected system, dark or light": "PREFERENCES_THEME: system, dark 또는 light여야 해요",
|
|
1364
1369
|
"PREFERENCES_VERSION: unsupported schema": "PREFERENCES_VERSION: 지원되지 않는 스키마",
|
|
1365
1370
|
"PREFERENCES_WRITER: invalid tab writer": "PREFERENCES_WRITER: 유효하지 않은 탭 작성자",
|
|
1366
1371
|
"PROPOSE --FROM-CONFIG{0} · LINT BLOCKS NOTHING": "PROPOSE --FROM-CONFIG{0} · LINT는 아무것도 차단하지 않음",
|
|
1367
1372
|
"Package revision": "패키지 리비전",
|
|
1368
|
-
"Pan requires finite coordinates and a positive scale": "화면 이동에는 유한한 좌표와 양수 배율이
|
|
1373
|
+
"Pan requires finite coordinates and a positive scale": "화면 이동에는 유한한 좌표와 양수 배율이 필요해요",
|
|
1369
1374
|
"Part": "파츠",
|
|
1370
1375
|
"Part ": "파츠 ",
|
|
1371
1376
|
"Part catalog exceeds 128 MiB": "파츠 카탈로그가 128 MiB를 초과함",
|
|
@@ -1382,8 +1387,8 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1382
1387
|
"Part {0}: malformed posed geometry": "파츠 {0}: 잘못된 포즈 지오메트리",
|
|
1383
1388
|
"Parts and settings": "파츠 및 설정",
|
|
1384
1389
|
"Parts explorer": "파츠 탐색기",
|
|
1385
|
-
"Parts unavailable · {0}. The rig keeps drawing whole; selection, Solo and feedback targeting are off {1}.": "파츠 사용 불가 · {0}. 리그는 전체로 계속 그려지며 선택, 솔로 및 피드백 대상 지정은 {1}
|
|
1386
|
-
"Parts unavailable · {0}. The whole rig stays drawn; no slot is selected, soloed or targeted from stale data.": "파츠 사용 불가 · {0}. 전체 리그는 계속 그려지며 오래된 데이터로부터 슬롯이 선택, 솔로 또는 대상 지정되지
|
|
1390
|
+
"Parts unavailable · {0}. The rig keeps drawing whole; selection, Solo and feedback targeting are off {1}.": "파츠 사용 불가 · {0}. 리그는 전체로 계속 그려지며 선택, 솔로 및 피드백 대상 지정은 {1} 비활성화돼요.",
|
|
1391
|
+
"Parts unavailable · {0}. The whole rig stays drawn; no slot is selected, soloed or targeted from stale data.": "파츠 사용 불가 · {0}. 전체 리그는 계속 그려지며 오래된 데이터로부터 슬롯이 선택, 솔로 또는 대상 지정되지 않아요.",
|
|
1387
1392
|
"Pass": "통과",
|
|
1388
1393
|
"Pass-through": "관통",
|
|
1389
1394
|
"Pass-through cloth slot": "관통 클로스 슬롯",
|
|
@@ -1392,7 +1397,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1392
1397
|
"Pause comparison": "비교 일시정지",
|
|
1393
1398
|
"Pending": "대기 중",
|
|
1394
1399
|
"Pending on Build {0}: {1} {2} {3} (strip row {4}) — not applied.": "빌드 {0}에 보류 중: {1} {2} {3} (스트립 행 {4}) — 적용되지 않음.",
|
|
1395
|
-
"Pending on the stage: {0} {1} {2} (strip row {3}) — not applied. The Mesh panel's Apply applies it; Back returns the stage. {4}": "스테이지에 보류 중: {0} {1} {2} (스트립 행 {3}) — 적용되지 않음. 메시 패널의 적용 버튼으로 적용하며 돌아가기로 스테이지를
|
|
1400
|
+
"Pending on the stage: {0} {1} {2} (strip row {3}) — not applied. The Mesh panel's Apply applies it; Back returns the stage. {4}": "스테이지에 보류 중: {0} {1} {2} (스트립 행 {3}) — 적용되지 않음. 메시 패널의 적용 버튼으로 적용하며 돌아가기로 스테이지를 복원해요. {4}",
|
|
1396
1401
|
"Person": "인물",
|
|
1397
1402
|
"Person in input pose": "입력 포즈의 인물",
|
|
1398
1403
|
"Physics": "물리",
|
|
@@ -1412,8 +1417,8 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1412
1417
|
"Pick a rigid part (or select it on the stage)": "강체 파츠 선택 (또는 스테이지에서 선택)",
|
|
1413
1418
|
"Pick a track to edit it, or add one below.": "트랙을 선택하여 편집하거나 아래에서 새로 추가하세요.",
|
|
1414
1419
|
"Pick on stage": "스테이지에서 선택",
|
|
1415
|
-
"Pick readings, then Run: each runs on the inspected build and on the latest scratch build.": "측정 항목을 선택한 뒤 실행을 누르세요. 각 항목은 점검 중인 빌드와 최신 임시 빌드에서
|
|
1416
|
-
"Pick readings, then Run: each runs on the picked build and on its latest scratch build.": "측정 항목을 선택한 뒤 실행을 누르세요. 각 항목은 선택된 빌드와 해당 최신 임시 빌드에서
|
|
1420
|
+
"Pick readings, then Run: each runs on the inspected build and on the latest scratch build.": "측정 항목을 선택한 뒤 실행을 누르세요. 각 항목은 점검 중인 빌드와 최신 임시 빌드에서 실행돼요.",
|
|
1421
|
+
"Pick readings, then Run: each runs on the picked build and on its latest scratch build.": "측정 항목을 선택한 뒤 실행을 누르세요. 각 항목은 선택된 빌드와 해당 최신 임시 빌드에서 실행돼요.",
|
|
1417
1422
|
"Picked build for Setup and Animate": "셋업 및 애니메이트 대상 빌드",
|
|
1418
1423
|
"Picked {0}.": "{0} 선택됨.",
|
|
1419
1424
|
"Place cut": "컷 배치",
|
|
@@ -1424,23 +1429,23 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1424
1429
|
"Play cue audio in sync": "큐 오디오 동기화 재생",
|
|
1425
1430
|
"Play reference video and both rigs": "레퍼런스 비디오 및 두 리그 재생",
|
|
1426
1431
|
"Playback": "재생",
|
|
1427
|
-
"Playback is paused: {0}. Use Play to retry.": "재생이
|
|
1428
|
-
"Playback stopped at the last supported decoded reference frame: {0} s (shared clip end {1} s).": "지원되는 마지막 디코딩 레퍼런스 프레임에서 재생이
|
|
1429
|
-
"Playback stopped outside the shared clip domain. Exact reference selection is unavailable; choose a supported time to inspect again.": "공유 클립 도메인 밖에서 재생이
|
|
1432
|
+
"Playback is paused: {0}. Use Play to retry.": "재생이 일시정지됐어요: {0}. 다시 시도하려면 재생을 누르세요.",
|
|
1433
|
+
"Playback stopped at the last supported decoded reference frame: {0} s (shared clip end {1} s).": "지원되는 마지막 디코딩 레퍼런스 프레임에서 재생이 중지됐어요: {0}초 (공유 클립 끝 {1}초).",
|
|
1434
|
+
"Playback stopped outside the shared clip domain. Exact reference selection is unavailable; choose a supported time to inspect again.": "공유 클립 도메인 밖에서 재생이 중지됐어요. 정확한 레퍼런스 선택을 사용할 수 없으니 다시 점검하려면 지원되는 시간을 선택하세요.",
|
|
1430
1435
|
"Playback time": "재생 시간",
|
|
1431
|
-
"Polygon dropped.": "다각형 그리기가
|
|
1436
|
+
"Polygon dropped.": "다각형 그리기가 취소됐어요.",
|
|
1432
1437
|
"Pose reference HTTP {0}": "포즈 레퍼런스 HTTP {0}",
|
|
1433
|
-
"Pose reference: expected object": "포즈 레퍼런스: 객체가
|
|
1434
|
-
"Pose reference: expected rig-review-pose/1 with positive dimensions": "포즈 레퍼런스: 양수 크기를 가진 rig-review-pose/1이
|
|
1435
|
-
"Pose reference: joints require unique IDs and finite x/y": "포즈 레퍼런스: 관절에는 고유 ID와 유한한 x/y가
|
|
1438
|
+
"Pose reference: expected object": "포즈 레퍼런스: 객체가 필요해요",
|
|
1439
|
+
"Pose reference: expected rig-review-pose/1 with positive dimensions": "포즈 레퍼런스: 양수 크기를 가진 rig-review-pose/1이 필요해요",
|
|
1440
|
+
"Pose reference: joints require unique IDs and finite x/y": "포즈 레퍼런스: 관절에는 고유 ID와 유한한 x/y가 필요해요",
|
|
1436
1441
|
"Pose reference: unknown parent {0}": "포즈 레퍼런스: 알 수 없는 부모 {0}",
|
|
1437
1442
|
"Pose sequence": "포즈 시퀀스",
|
|
1438
1443
|
"Posed bone \"{0}\" ({1}) at {2} s ({3} pending op(s), preview active).": "{2}초에 본 \"{0}\" ({1}) 포즈 조작됨 (보류 중인 작업 {3}개, 미리보기 활성).",
|
|
1439
1444
|
"Presentation pending": "표시 대기 중",
|
|
1440
1445
|
"Preview edits (not recorded)": "편집 미리보기 (기록되지 않음)",
|
|
1441
|
-
"Preview off · Apply decides.": "미리보기 꺼짐 · 적용 시
|
|
1442
|
-
"Preview off · mass and x/y/rotate require Apply. Clear resumes authored values on the next evaluation; integrated history is kept.": "미리보기 꺼짐 · 질량 및 x/y/회전은 적용이
|
|
1443
|
-
"Preview only · does not create motion keys.": "미리보기 전용 · 모션 키를 생성하지
|
|
1446
|
+
"Preview off · Apply decides.": "미리보기 꺼짐 · 적용 시 확정돼요.",
|
|
1447
|
+
"Preview off · mass and x/y/rotate require Apply. Clear resumes authored values on the next evaluation; integrated history is kept.": "미리보기 꺼짐 · 질량 및 x/y/회전은 적용이 필요해요. 초기화 시 다음 평가에서 작성된 값으로 복귀하며 적분 이력은 유지돼요.",
|
|
1448
|
+
"Preview only · does not create motion keys.": "미리보기 전용 · 모션 키를 생성하지 않아요.",
|
|
1444
1449
|
"Preview pending physics": "대기 중인 물리 미리보기",
|
|
1445
1450
|
"Previous": "이전",
|
|
1446
1451
|
"Previous draw · synchronizing": "이전 그림 · 동기화 중",
|
|
@@ -1450,7 +1455,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1450
1455
|
"Property for a new track": "새 트랙의 속성",
|
|
1451
1456
|
"Propose's refusals, the written config's diff, the route and check": "Propose의 거부, 작성된 설정의 diff, 경로 및 점검",
|
|
1452
1457
|
"Public generator": "공개 생성기",
|
|
1453
|
-
"Put a pose sequence the package declares onto this rig: edit the <code>rig-pose-map/1</code> (per chain, the bone that carries each segment), set the clean and retarget flags, and Apply. The installed <code>@rig-c/pose</code> runs <code>rig-pose clean</code> and <code>rig-pose retarget</code> onto the handoff rig, and its <code>rigc</code> compiles the result, all into scratch; the new animation plays here beside the reference (pick the sequence under Reference). Review writes no keys and never writes the package's <code>motion.json</code>. Refusals (<code>POSE_NOT_CLEANED</code>, <code>POSE_BEND_ONE_WAY</code>, <code>RAISED_HEAD</code>, <code>MOTION_NAME_FREE</code>, <code>MAP_*</code>) are the producer's, verbatim. FEET, STANCE, FLIP, SHORT, END-ON, LEG-SCALE and REACH lines seek to their frame.": "패키지가 선언한 포즈 시퀀스를 이 리그에
|
|
1458
|
+
"Put a pose sequence the package declares onto this rig: edit the <code>rig-pose-map/1</code> (per chain, the bone that carries each segment), set the clean and retarget flags, and Apply. The installed <code>@rig-c/pose</code> runs <code>rig-pose clean</code> and <code>rig-pose retarget</code> onto the handoff rig, and its <code>rigc</code> compiles the result, all into scratch; the new animation plays here beside the reference (pick the sequence under Reference). Review writes no keys and never writes the package's <code>motion.json</code>. Refusals (<code>POSE_NOT_CLEANED</code>, <code>POSE_BEND_ONE_WAY</code>, <code>RAISED_HEAD</code>, <code>MOTION_NAME_FREE</code>, <code>MAP_*</code>) are the producer's, verbatim. FEET, STANCE, FLIP, SHORT, END-ON, LEG-SCALE and REACH lines seek to their frame.": "패키지가 선언한 포즈 시퀀스를 이 리그에 입혀요: <code>rig-pose-map/1</code>(체인별 각 세그먼트를 담당할 본)을 편집하고 클린 및 리타겟 플래그를 설정한 뒤 적용(Apply)하세요. 설치된 <code>@rig-c/pose</code>가 핸드오프 리그에 대해 <code>rig-pose clean</code>과 <code>rig-pose retarget</code>를 실행하고 <code>rigc</code>가 결과를 모두 스크래치로 컴파일해요. 새 애니메이션은 레퍼런스 옆에서 재생돼요(레퍼런스에서 시퀀스 선택). 리뷰 앱은 키를 직접 작성하지 않으며 패키지의 <code>motion.json</code>을 절대 수정하지 않아요. 거부(<code>POSE_NOT_CLEANED</code>, <code>POSE_BEND_ONE_WAY</code>, <code>RAISED_HEAD</code>, <code>MOTION_NAME_FREE</code>, <code>MAP_*</code>)는 프로듀서 출력 그대로 표시돼요. FEET, STANCE, FLIP, SHORT, END-ON, LEG-SCALE 및 REACH 라인은 클릭 시 해당 프레임으로 이동해요.",
|
|
1454
1459
|
"Quality": "품질",
|
|
1455
1460
|
"R region band": "R 영역 밴드",
|
|
1456
1461
|
"R region centre x": "R 영역 중심 x",
|
|
@@ -1460,26 +1465,26 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1460
1465
|
"READINGS_BODY_LIMIT: maximum 64 KiB": "READINGS_BODY_LIMIT: 최대 64 KiB",
|
|
1461
1466
|
"READINGS_FAILED: {0}": "READINGS_FAILED: {0}",
|
|
1462
1467
|
"READINGS_NONE_CHOSEN: pick at least one reading": "READINGS_NONE_CHOSEN: 하나 이상의 측정 항목을 선택하세요",
|
|
1463
|
-
"READINGS_NO_ANIMATION: no animation is drawn": "READINGS_NO_ANIMATION: 그려진 애니메이션이
|
|
1464
|
-
"READINGS_PAIR_INCOMPLETE: {0} needs both names": "READINGS_PAIR_INCOMPLETE: {0}에는 두 이름이 모두
|
|
1465
|
-
"READINGS_UNAVAILABLE: no reading ran": "READINGS_UNAVAILABLE: 실행된 측정이
|
|
1468
|
+
"READINGS_NO_ANIMATION: no animation is drawn": "READINGS_NO_ANIMATION: 그려진 애니메이션이 없어요",
|
|
1469
|
+
"READINGS_PAIR_INCOMPLETE: {0} needs both names": "READINGS_PAIR_INCOMPLETE: {0}에는 두 이름이 모두 필요해요",
|
|
1470
|
+
"READINGS_UNAVAILABLE: no reading ran": "READINGS_UNAVAILABLE: 실행된 측정이 없어요",
|
|
1466
1471
|
"REBUILD_BODY_LIMIT: maximum 1 KiB": "REBUILD_BODY_LIMIT: 최대 1 KiB",
|
|
1467
1472
|
"REBUILD_BODY_LIMIT: maximum 64 KiB": "REBUILD_BODY_LIMIT: 최대 64 KiB",
|
|
1468
|
-
"REBUILD_BUSY: an Apply is still running": "REBUILD_BUSY: 적용 작업이 아직 실행
|
|
1469
|
-
"REBUILD_BUSY: density strip {0} is still running": "REBUILD_BUSY: 밀도 스트립 {0}이(가) 아직 실행
|
|
1470
|
-
"REBUILD_BUSY: rebuild {0} is still running": "REBUILD_BUSY: 리빌드 {0}이(가) 아직 실행
|
|
1473
|
+
"REBUILD_BUSY: an Apply is still running": "REBUILD_BUSY: 적용 작업이 아직 실행 중이에요",
|
|
1474
|
+
"REBUILD_BUSY: density strip {0} is still running": "REBUILD_BUSY: 밀도 스트립 {0}이(가) 아직 실행 중이에요",
|
|
1475
|
+
"REBUILD_BUSY: rebuild {0} is still running": "REBUILD_BUSY: 리빌드 {0}이(가) 아직 실행 중이에요",
|
|
1471
1476
|
"REBUILD_FAILED: exit {0}": "REBUILD_FAILED: 종료 코드 {0}",
|
|
1472
1477
|
"REBUILD_FAILED: {0}": "REBUILD_FAILED: {0}",
|
|
1473
|
-
"REBUILD_INPUTS_CHANGED: {0} changed since the review was opened; restart review": "REBUILD_INPUTS_CHANGED: 리뷰를 연 이후 {0}이(가)
|
|
1474
|
-
"REBUILD_INPUTS_UNAVAILABLE: the config states no contour mesh": "REBUILD_INPUTS_UNAVAILABLE: 설정에 선언된 윤곽 메시가
|
|
1475
|
-
"This rig has no contour mesh. Chest regions and bust motion need the torso built as a contour mesh, which the builder declares in the config. Nothing is wrong with this rig.": "이 리그에는 윤곽(contour) 메시가
|
|
1476
|
-
"The config states {0} meshes, none of them contour: {1}": "설정에 메시 {0}개가 선언되어 있으며 윤곽 메시는
|
|
1477
|
-
"The config states no meshes.": "설정에 선언된 메시가
|
|
1478
|
-
"This part is not a contour mesh, so chest regions and bust motion cannot be rebuilt on it. The builder chooses each part's mesh kind in the config. Nothing is wrong with this rig.": "이 파츠는 윤곽(contour) 메시가 아니어서 흉부 영역과 가슴 움직임을 다시 빌드할 수
|
|
1479
|
-
"REBUILD_PART_AMBIGUOUS: the config states {0} contour meshes and the designated bones name none of them alone": "REBUILD_PART_AMBIGUOUS: 설정에 윤곽 메시 {0}개가 선언되어 있으며 지정된 본들이 어느 하나를 단독으로 가리키지
|
|
1480
|
-
"REBUILD_PART_AMBIGUOUS: the config states {0} contour meshes and the landmark bones name none of them alone": "REBUILD_PART_AMBIGUOUS: 설정에 윤곽 메시 {0}개가 선언되어 있으며 랜드마크 본들이 어느 하나를 단독으로 가리키지
|
|
1481
|
-
"REBUILD_REGION_DUPLICATE: {0} (two regions of the chest part carry this name)": "REBUILD_REGION_DUPLICATE: {0} (가슴 파츠의 두 영역이 이 이름을
|
|
1482
|
-
"REBUILD_REGION_INCOMPLETE: no region has a centre": "REBUILD_REGION_INCOMPLETE: 중심이 지정된 영역이
|
|
1478
|
+
"REBUILD_INPUTS_CHANGED: {0} changed since the review was opened; restart review": "REBUILD_INPUTS_CHANGED: 리뷰를 연 이후 {0}이(가) 변경됐어요. 리뷰를 재시작하세요",
|
|
1479
|
+
"REBUILD_INPUTS_UNAVAILABLE: the config states no contour mesh": "REBUILD_INPUTS_UNAVAILABLE: 설정에 선언된 윤곽 메시가 없어요",
|
|
1480
|
+
"This rig has no contour mesh. Chest regions and bust motion need the torso built as a contour mesh, which the builder declares in the config. Nothing is wrong with this rig.": "이 리그에는 윤곽(contour) 메시가 없어요. 흉부 영역과 가슴 움직임은 몸통이 윤곽 메시로 만들어져 있어야 하며, 이는 빌더가 설정에서 선언해요. 이 리그에는 문제가 없어요.",
|
|
1481
|
+
"The config states {0} meshes, none of them contour: {1}": "설정에 메시 {0}개가 선언되어 있으며 윤곽 메시는 없어요: {1}",
|
|
1482
|
+
"The config states no meshes.": "설정에 선언된 메시가 없어요.",
|
|
1483
|
+
"This part is not a contour mesh, so chest regions and bust motion cannot be rebuilt on it. The builder chooses each part's mesh kind in the config. Nothing is wrong with this rig.": "이 파츠는 윤곽(contour) 메시가 아니어서 흉부 영역과 가슴 움직임을 다시 빌드할 수 없어요. 파츠마다 메시 종류는 빌더가 설정에서 정해요. 이 리그에는 문제가 없어요.",
|
|
1484
|
+
"REBUILD_PART_AMBIGUOUS: the config states {0} contour meshes and the designated bones name none of them alone": "REBUILD_PART_AMBIGUOUS: 설정에 윤곽 메시 {0}개가 선언되어 있으며 지정된 본들이 어느 하나를 단독으로 가리키지 않아요",
|
|
1485
|
+
"REBUILD_PART_AMBIGUOUS: the config states {0} contour meshes and the landmark bones name none of them alone": "REBUILD_PART_AMBIGUOUS: 설정에 윤곽 메시 {0}개가 선언되어 있으며 랜드마크 본들이 어느 하나를 단독으로 가리키지 않아요",
|
|
1486
|
+
"REBUILD_REGION_DUPLICATE: {0} (two regions of the chest part carry this name)": "REBUILD_REGION_DUPLICATE: {0} (가슴 파츠의 두 영역이 이 이름을 사용해요)",
|
|
1487
|
+
"REBUILD_REGION_INCOMPLETE: no region has a centre": "REBUILD_REGION_INCOMPLETE: 중심이 지정된 영역이 없어요",
|
|
1483
1488
|
"REBUILD_REGION_INCOMPLETE: {0} bone": "REBUILD_REGION_INCOMPLETE: {0} 본",
|
|
1484
1489
|
"REBUILD_REGION_INCOMPLETE: {0} name": "REBUILD_REGION_INCOMPLETE: {0} 이름",
|
|
1485
1490
|
"REBUILD_REGION_INCOMPLETE: {0} {1}": "REBUILD_REGION_INCOMPLETE: {0} {1}",
|
|
@@ -1487,46 +1492,46 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1487
1492
|
"REBUILD_STATUS_UNAVAILABLE: {0}": "REBUILD_STATUS_UNAVAILABLE: {0}",
|
|
1488
1493
|
"REF · {0}": "레퍼런스 · {0}",
|
|
1489
1494
|
"REFERENCE": "레퍼런스",
|
|
1490
|
-
"REFERENCE_FRAME_INDEX_INVALID: finite duration and frames required": "REFERENCE_FRAME_INDEX_INVALID: 유한한 길이와 프레임이
|
|
1491
|
-
"REFERENCE_FRAME_INDEX_INVALID: ordered finite frames inside video duration required": "REFERENCE_FRAME_INDEX_INVALID: 비디오 길이 내의 순서가 지정된 유한한 프레임이
|
|
1492
|
-
"REFERENCE_FRAME_MISMATCH: decoded frame does not match selected reference PTS; choose another supported time to inspect": "REFERENCE_FRAME_MISMATCH: 디코딩된 프레임이 선택된 레퍼런스 PTS와 일치하지
|
|
1493
|
-
"REFERENCE_FRAME_PTS_AMBIGUOUS: duplicate or unordered PTS cannot identify an exact decoded frame": "REFERENCE_FRAME_PTS_AMBIGUOUS: 중복되거나 순서가 맞지 않는 PTS로는 정확한 디코딩 프레임을 식별할 수
|
|
1494
|
-
"REFERENCE_FRAME_SEEK_UNAVAILABLE: frame interval has no representable interior": "REFERENCE_FRAME_SEEK_UNAVAILABLE: 프레임 구간에 표현 가능한 내부 값이
|
|
1495
|
-
"REFERENCE_FRAME_SEEK_UNAVAILABLE: no real frame interval": "REFERENCE_FRAME_SEEK_UNAVAILABLE: 실제 프레임 구간이
|
|
1496
|
-
"REFERENCE_OUT_OF_DOMAIN: {0}. The reference was not clamped.": "REFERENCE_OUT_OF_DOMAIN: {0}. 레퍼런스가 클램핑되지
|
|
1497
|
-
"REFERENCE_SAMPLE_LIMIT: exact review association supports at most 100000 explicit samples": "REFERENCE_SAMPLE_LIMIT: 정확한 리뷰 매핑은 최대 100000개의 명시적 샘플을
|
|
1495
|
+
"REFERENCE_FRAME_INDEX_INVALID: finite duration and frames required": "REFERENCE_FRAME_INDEX_INVALID: 유한한 길이와 프레임이 필요해요",
|
|
1496
|
+
"REFERENCE_FRAME_INDEX_INVALID: ordered finite frames inside video duration required": "REFERENCE_FRAME_INDEX_INVALID: 비디오 길이 내의 순서가 지정된 유한한 프레임이 필요해요",
|
|
1497
|
+
"REFERENCE_FRAME_MISMATCH: decoded frame does not match selected reference PTS; choose another supported time to inspect": "REFERENCE_FRAME_MISMATCH: 디코딩된 프레임이 선택된 레퍼런스 PTS와 일치하지 않아요. 점검할 다른 지원 시간을 선택하세요",
|
|
1498
|
+
"REFERENCE_FRAME_PTS_AMBIGUOUS: duplicate or unordered PTS cannot identify an exact decoded frame": "REFERENCE_FRAME_PTS_AMBIGUOUS: 중복되거나 순서가 맞지 않는 PTS로는 정확한 디코딩 프레임을 식별할 수 없어요",
|
|
1499
|
+
"REFERENCE_FRAME_SEEK_UNAVAILABLE: frame interval has no representable interior": "REFERENCE_FRAME_SEEK_UNAVAILABLE: 프레임 구간에 표현 가능한 내부 값이 없어요",
|
|
1500
|
+
"REFERENCE_FRAME_SEEK_UNAVAILABLE: no real frame interval": "REFERENCE_FRAME_SEEK_UNAVAILABLE: 실제 프레임 구간이 없어요",
|
|
1501
|
+
"REFERENCE_OUT_OF_DOMAIN: {0}. The reference was not clamped.": "REFERENCE_OUT_OF_DOMAIN: {0}. 레퍼런스가 클램핑되지 않았어요.",
|
|
1502
|
+
"REFERENCE_SAMPLE_LIMIT: exact review association supports at most 100000 explicit samples": "REFERENCE_SAMPLE_LIMIT: 정확한 리뷰 매핑은 최대 100000개의 명시적 샘플을 지원해요",
|
|
1498
1503
|
"REFERENCE_SELECTION_UNAVAILABLE: {0}": "REFERENCE_SELECTION_UNAVAILABLE: {0}",
|
|
1499
1504
|
"REGIONS": "영역(REGIONS)",
|
|
1500
1505
|
"REGIONS.<PART> · THE BONE A RIGID PART RIDES": "REGIONS.<PART> · 강체 파츠가 따르는 본",
|
|
1501
1506
|
"REQUIREMENTS · RIG-PARTS CHECK": "요구사항 · RIG-PARTS CHECK",
|
|
1502
1507
|
"REQUIREMENTS_BODY_LIMIT: maximum 64 KiB": "REQUIREMENTS_BODY_LIMIT: 최대 64 KiB",
|
|
1503
|
-
"REQUIREMENTS_FAILED: no answer from the check": "REQUIREMENTS_FAILED: 검사로부터 응답이
|
|
1504
|
-
"REQUIREMENTS_SELF_TARGET: aim of bone \"{0}\" at its own {1} has no line to measure; pick another target bone": "REQUIREMENTS_SELF_TARGET: 본 \"{0}\"이(가) 자신의 {1}을(를) 조준하면 측정할 선이
|
|
1505
|
-
"REQUIREMENTS_SELF_TARGET: contact of bone \"{0}\" {1} against itself measures 0 in every frame; pick another bone or point": "REQUIREMENTS_SELF_TARGET: 본 \"{0}\" {1}의 자기 자신과의 접촉은 모든 프레임에서 0으로
|
|
1506
|
-
"REQUIREMENTS_UNAVAILABLE: no producer handoff": "REQUIREMENTS_UNAVAILABLE: 프로듀서 핸드오프가
|
|
1507
|
-
"REQUIREMENTS_UNAVAILABLE: no rig spec loaded": "REQUIREMENTS_UNAVAILABLE: 로드된 리그 사양이
|
|
1508
|
+
"REQUIREMENTS_FAILED: no answer from the check": "REQUIREMENTS_FAILED: 검사로부터 응답이 없어요",
|
|
1509
|
+
"REQUIREMENTS_SELF_TARGET: aim of bone \"{0}\" at its own {1} has no line to measure; pick another target bone": "REQUIREMENTS_SELF_TARGET: 본 \"{0}\"이(가) 자신의 {1}을(를) 조준하면 측정할 선이 없어요. 다른 대상 본을 선택하세요",
|
|
1510
|
+
"REQUIREMENTS_SELF_TARGET: contact of bone \"{0}\" {1} against itself measures 0 in every frame; pick another bone or point": "REQUIREMENTS_SELF_TARGET: 본 \"{0}\" {1}의 자기 자신과의 접촉은 모든 프레임에서 0으로 측정돼요. 다른 본이나 포인트를 선택하세요",
|
|
1511
|
+
"REQUIREMENTS_UNAVAILABLE: no producer handoff": "REQUIREMENTS_UNAVAILABLE: 프로듀서 핸드오프가 없어요",
|
|
1512
|
+
"REQUIREMENTS_UNAVAILABLE: no rig spec loaded": "REQUIREMENTS_UNAVAILABLE: 로드된 리그 사양이 없어요",
|
|
1508
1513
|
"REQUIREMENTS_UNAVAILABLE: {0}": "REQUIREMENTS_UNAVAILABLE: {0}",
|
|
1509
1514
|
"RETARGET · RIG-POSE": "리타겟 · RIG-POSE",
|
|
1510
1515
|
"RETARGET_FLAG_INCOMPLETE: clean windows": "RETARGET_FLAG_INCOMPLETE: 정리 윈도우(clean windows)",
|
|
1511
1516
|
"RETARGET_FLAG_INCOMPLETE: leg scale min and max": "RETARGET_FLAG_INCOMPLETE: 다리 스케일 최솟값 및 최댓값",
|
|
1512
1517
|
"RETARGET_FLAG_INCOMPLETE: name the new animation": "RETARGET_FLAG_INCOMPLETE: 새 애니메이션의 이름을 지정하세요",
|
|
1513
1518
|
"RETARGET_FLAG_INCOMPLETE: {0}": "RETARGET_FLAG_INCOMPLETE: {0}",
|
|
1514
|
-
"RETARGET_MAP_INCOMPLETE: chain \"{0}\" bone {1} ({2} → {3}) is not picked": "RETARGET_MAP_INCOMPLETE: 체인 \"{0}\" 본 {1} ({2} → {3})이(가) 선택되지
|
|
1515
|
-
"RETARGET_MAP_INCOMPLETE: no chain is included": "RETARGET_MAP_INCOMPLETE: 포함된 체인이
|
|
1516
|
-
"RETARGET_MAP_INCOMPLETE: the translate scale's rig points are not picked": "RETARGET_MAP_INCOMPLETE: 이동 스케일의 리그 포인트가 선택되지
|
|
1517
|
-
"RETARGET_MAP_INCOMPLETE: the translated bone is not picked": "RETARGET_MAP_INCOMPLETE: 이동 대상 본이 선택되지
|
|
1518
|
-
"RETARGET_MAP_INVALID: expected a {0} document with chains of {name, bones, joints}": "RETARGET_MAP_INVALID: {name, bones, joints} 체인을 가진 {0} 문서가
|
|
1519
|
+
"RETARGET_MAP_INCOMPLETE: chain \"{0}\" bone {1} ({2} → {3}) is not picked": "RETARGET_MAP_INCOMPLETE: 체인 \"{0}\" 본 {1} ({2} → {3})이(가) 선택되지 않았어요",
|
|
1520
|
+
"RETARGET_MAP_INCOMPLETE: no chain is included": "RETARGET_MAP_INCOMPLETE: 포함된 체인이 없어요",
|
|
1521
|
+
"RETARGET_MAP_INCOMPLETE: the translate scale's rig points are not picked": "RETARGET_MAP_INCOMPLETE: 이동 스케일의 리그 포인트가 선택되지 않았어요",
|
|
1522
|
+
"RETARGET_MAP_INCOMPLETE: the translated bone is not picked": "RETARGET_MAP_INCOMPLETE: 이동 대상 본이 선택되지 않았어요",
|
|
1523
|
+
"RETARGET_MAP_INVALID: expected a {0} document with chains of {name, bones, joints}": "RETARGET_MAP_INVALID: {name, bones, joints} 체인을 가진 {0} 문서가 필요해요",
|
|
1519
1524
|
"RETARGET_MAP_INVALID: {0}": "RETARGET_MAP_INVALID: {0}",
|
|
1520
|
-
"RETARGET_SEQUENCE_UNAVAILABLE: the package declares no rig-pose-sequence/1 reference (a pose reference in review.json, or a *pose*.json in the opened folder)": "RETARGET_SEQUENCE_UNAVAILABLE: 패키지에 선언된 rig-pose-sequence/1 레퍼런스가
|
|
1525
|
+
"RETARGET_SEQUENCE_UNAVAILABLE: the package declares no rig-pose-sequence/1 reference (a pose reference in review.json, or a *pose*.json in the opened folder)": "RETARGET_SEQUENCE_UNAVAILABLE: 패키지에 선언된 rig-pose-sequence/1 레퍼런스가 없어요(review.json의 포즈 레퍼런스 또는 열린 폴더의 *pose*.json)",
|
|
1521
1526
|
"REVIEW": "리뷰",
|
|
1522
1527
|
"REVIEWED SOURCE": "리뷰 대상 소스",
|
|
1523
1528
|
"RIG FIELDS · CONFIG · APPLY REBUILDS": "리그 필드 · 설정 · 적용 시 리빌드",
|
|
1524
|
-
"RIG_FIELDS_NOTHING_PENDING: no pending ops": "RIG_FIELDS_NOTHING_PENDING: 보류 중인 작업이
|
|
1525
|
-
"RIG_FIELDS_NO_SEED: {0}'s eye bone states no origin": "RIG_FIELDS_NO_SEED: {0}의 눈 본에 원점이 선언되어 있지
|
|
1526
|
-
"RIG_FIELDS_UNAVAILABLE: no producer handoff": "RIG_FIELDS_UNAVAILABLE: 프로듀서 핸드오프가
|
|
1527
|
-
"RIG_FIELDS_VALUE_INVALID: {0} must be a number": "RIG_FIELDS_VALUE_INVALID: {0}은(는) 숫자여야
|
|
1529
|
+
"RIG_FIELDS_NOTHING_PENDING: no pending ops": "RIG_FIELDS_NOTHING_PENDING: 보류 중인 작업이 없어요",
|
|
1530
|
+
"RIG_FIELDS_NO_SEED: {0}'s eye bone states no origin": "RIG_FIELDS_NO_SEED: {0}의 눈 본에 원점이 선언되어 있지 않아요",
|
|
1531
|
+
"RIG_FIELDS_UNAVAILABLE: no producer handoff": "RIG_FIELDS_UNAVAILABLE: 프로듀서 핸드오프가 없어요",
|
|
1532
|
+
"RIG_FIELDS_VALUE_INVALID: {0} must be a number": "RIG_FIELDS_VALUE_INVALID: {0}은(는) 숫자여야 해요",
|
|
1528
1533
|
"Ramp": "램프(그라데이션)",
|
|
1529
|
-
"Ramped {0} over {1} links ({2} → {3}); Apply rebuilds.": "{1}개 링크에 걸쳐 {0} 램프 설정됨 ({2} → {3}); 적용 시 다시
|
|
1534
|
+
"Ramped {0} over {1} links ({2} → {3}); Apply rebuilds.": "{1}개 링크에 걸쳐 {0} 램프 설정됨 ({2} → {3}); 적용 시 다시 빌드해요.",
|
|
1530
1535
|
"Read-only animation inspection": "읽기 전용 애니메이션 검사",
|
|
1531
1536
|
"Read-only clip · {0}: {1}": "읽기 전용 클립 · {0}: {1}",
|
|
1532
1537
|
"Read-only report events": "읽기 전용 리포트 이벤트",
|
|
@@ -1537,48 +1542,48 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1537
1542
|
"Reading ticks": "판독 눈금",
|
|
1538
1543
|
"Reading · {0} → F{1} · {2} s": "측정 · {0} → F{1} · {2}초",
|
|
1539
1544
|
"Readings": "판독(리딩)",
|
|
1540
|
-
"Readings and Apply's check read this wind and gravity as a rigc-environment/1 schedule; the wind clock restarts with the clip so you watch the same world": "판독과 적용의 점검이 이 바람과 중력을 rigc-environment/1 스케줄로
|
|
1545
|
+
"Readings and Apply's check read this wind and gravity as a rigc-environment/1 schedule; the wind clock restarts with the clip so you watch the same world": "판독과 적용의 점검이 이 바람과 중력을 rigc-environment/1 스케줄로 읽어요. 동일한 월드를 볼 수 있도록 바람 클럭이 클립과 함께 재시작돼요",
|
|
1541
1546
|
"Reason": "사유",
|
|
1542
1547
|
"Rebuilding {0} on Build {1} with {2} {3}…": "{2} {3}로 빌드 {1}에서 {0} 리빌드 중…",
|
|
1543
1548
|
"Rebuilding {0} with {1} {2}…": "{1} {2}로 {0} 리빌드 중…",
|
|
1544
|
-
"Recomposite error map of the scratch build: red is painting no part holds, blue a part more than 40 off": "임시 빌드의 재합성 오차 맵: 빨간색은 어떤 파츠에도 포함되지 않은 원화, 파란색은 40 이상 벗어난
|
|
1549
|
+
"Recomposite error map of the scratch build: red is painting no part holds, blue a part more than 40 off": "임시 빌드의 재합성 오차 맵: 빨간색은 어떤 파츠에도 포함되지 않은 원화, 파란색은 40 이상 벗어난 파츠예요",
|
|
1545
1550
|
"Record checkpoint notes and outcomes.": "체크포인트 메모와 판정을 기록하세요.",
|
|
1546
|
-
"Record review status and structured feedback while preserving sources. Motion is read only.": "소스를 보존하면서 리뷰 상태와 구조화 피드백을
|
|
1547
|
-
"Records the current checkpoint, time, reference, camera and inspection axis. Motion is read only: inspect, mark ranges and export feedback. No keys or source files are edited.": "현재 체크포인트, 시간, 레퍼런스, 카메라 및 검사 축을
|
|
1551
|
+
"Record review status and structured feedback while preserving sources. Motion is read only.": "소스를 보존하면서 리뷰 상태와 구조화 피드백을 기록해요. 모션은 읽기 전용이에요.",
|
|
1552
|
+
"Records the current checkpoint, time, reference, camera and inspection axis. Motion is read only: inspect, mark ranges and export feedback. No keys or source files are edited.": "현재 체크포인트, 시간, 레퍼런스, 카메라 및 검사 축을 기록해요. 모션은 읽기 전용이에요: 검사하고 구간을 표시하여 피드백을 내보내세요. 키나 소스 파일은 편집되지 않아요.",
|
|
1548
1553
|
"Recover local draft as pending": "로컬 초안을 보류 상태로 복구",
|
|
1549
1554
|
"Recovered local draft as pending · not submitted": "로컬 초안을 보류 상태로 복구함 · 제출되지 않음",
|
|
1550
1555
|
"Redo": "다시 실행",
|
|
1551
1556
|
"Redo · Shift-Cmd/Ctrl-Z": "다시 실행 · Shift-Cmd/Ctrl-Z",
|
|
1552
1557
|
"Reference": "레퍼런스",
|
|
1553
|
-
"Reference back in its domain at the held time.": "유지된 시간에서 레퍼런스가 도메인 내로
|
|
1554
|
-
"Reference changed during streaming": "스트리밍 중 레퍼런스가
|
|
1555
|
-
"Reference decoded {0} s · requested {1} s. The rig and saved view use the decoded timestamp.": "레퍼런스 디코딩 {0}초 · 요청 {1}초. 리그와 저장된 뷰는 디코딩된 타임스탬프를
|
|
1556
|
-
"Reference frame index identity differs": "레퍼런스 프레임 인덱스 식별 정보가
|
|
1557
|
-
"Reference image has no renderable pixels": "레퍼런스 이미지에 렌더링 가능한 픽셀이
|
|
1558
|
+
"Reference back in its domain at the held time.": "유지된 시간에서 레퍼런스가 도메인 내로 복귀했어요.",
|
|
1559
|
+
"Reference changed during streaming": "스트리밍 중 레퍼런스가 변경됐어요",
|
|
1560
|
+
"Reference decoded {0} s · requested {1} s. The rig and saved view use the decoded timestamp.": "레퍼런스 디코딩 {0}초 · 요청 {1}초. 리그와 저장된 뷰는 디코딩된 타임스탬프를 사용해요.",
|
|
1561
|
+
"Reference frame index identity differs": "레퍼런스 프레임 인덱스 식별 정보가 달라요",
|
|
1562
|
+
"Reference image has no renderable pixels": "레퍼런스 이미지에 렌더링 가능한 픽셀이 없어요",
|
|
1558
1563
|
"Reference image load failed": "레퍼런스 이미지 불러오기 실패",
|
|
1559
1564
|
"Reference image load timed out": "레퍼런스 이미지 불러오기 시간 초과",
|
|
1560
|
-
"Reference inputs changed while hashing": "해싱 중 레퍼런스 입력이
|
|
1561
|
-
"Reference inputs changed: expected regular video": "레퍼런스 입력 변경됨: 일반 비디오 파일이
|
|
1565
|
+
"Reference inputs changed while hashing": "해싱 중 레퍼런스 입력이 변경됐어요",
|
|
1566
|
+
"Reference inputs changed: expected regular video": "레퍼런스 입력 변경됨: 일반 비디오 파일이 필요해요",
|
|
1562
1567
|
"Reference inspection failed ({0}); prior inspection recovery failed ({1})": "레퍼런스 점검 실패({0}); 이전 점검 복구 실패({1})",
|
|
1563
|
-
"Reference must be the server-bound local compare video": "레퍼런스는 서버에 바인딩된 로컬 비교 비디오여야
|
|
1568
|
+
"Reference must be the server-bound local compare video": "레퍼런스는 서버에 바인딩된 로컬 비교 비디오여야 해요",
|
|
1564
1569
|
"Reference only": "레퍼런스만",
|
|
1565
1570
|
"Reference seek aborted": "레퍼런스 탐색 중단됨",
|
|
1566
1571
|
"Reference seek superseded": "레퍼런스 탐색이 대체됨",
|
|
1567
1572
|
"Reference video": "레퍼런스 비디오",
|
|
1568
|
-
"Reference video duration must be finite.": "레퍼런스 비디오 길이는 유한한 값이어야
|
|
1573
|
+
"Reference video duration must be finite.": "레퍼런스 비디오 길이는 유한한 값이어야 해요.",
|
|
1569
1574
|
"Reference video load failed": "레퍼런스 비디오 불러오기 실패",
|
|
1570
1575
|
"Reference video seek failed": "레퍼런스 비디오 탐색 실패",
|
|
1571
1576
|
"Reference video time to inspect": "검사할 레퍼런스 비디오 시간",
|
|
1572
|
-
"Reference video unavailable.": "레퍼런스 비디오를 사용할 수
|
|
1577
|
+
"Reference video unavailable.": "레퍼런스 비디오를 사용할 수 없어요.",
|
|
1573
1578
|
"Refine between {0} and {1}": "{0}와(과) {1} 사이 세분화",
|
|
1574
1579
|
"Refine ↓": "세분화 ↓",
|
|
1575
|
-
"Refused: there is no revision to load": "거부됨: 불러올 리비전이
|
|
1580
|
+
"Refused: there is no revision to load": "거부됨: 불러올 리비전이 없어요",
|
|
1576
1581
|
"Region 1": "영역 1",
|
|
1577
1582
|
"Region 2": "영역 2",
|
|
1578
1583
|
"Region · four posed corners": "영역 · 포즈된 네 모서리",
|
|
1579
1584
|
"Remeshed ": "리메시됨 ",
|
|
1580
|
-
"Remeshed {0}: {1} → {2} (remesh.json) · Reset returns to the inspected build": "{0} 리메시됨: {1} → {2} (remesh.json) · 초기화 시 점검 중인 빌드로
|
|
1581
|
-
"Remeshed · remesh.json carries no part counts": "리메시됨 · remesh.json에 파츠 카운트가
|
|
1585
|
+
"Remeshed {0}: {1} → {2} (remesh.json) · Reset returns to the inspected build": "{0} 리메시됨: {1} → {2} (remesh.json) · 초기화 시 점검 중인 빌드로 돌아가요",
|
|
1586
|
+
"Remeshed · remesh.json carries no part counts": "리메시됨 · remesh.json에 파츠 카운트가 없어요",
|
|
1582
1587
|
"Remote control unavailable": "원격 제어 사용 불가",
|
|
1583
1588
|
"Remote inspection command applied": "원격 점검 명령 적용됨",
|
|
1584
1589
|
"Remote inspection command applying": "원격 점검 명령 적용 중",
|
|
@@ -1599,27 +1604,27 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1599
1604
|
"Report defining the range frames": "프레임 구간을 정의하는 리포트",
|
|
1600
1605
|
"Report event category": "리포트 이벤트 카테고리",
|
|
1601
1606
|
"Report events": "리포트 이벤트",
|
|
1602
|
-
"Report has no frameTimes — regenerate with pose 0.30.0 or later": "리포트에 frameTimes가
|
|
1607
|
+
"Report has no frameTimes — regenerate with pose 0.30.0 or later": "리포트에 frameTimes가 없어요 — pose 0.30.0 이상으로 다시 생성하세요",
|
|
1603
1608
|
"Report time {0} s · no playback reference; time display only.": "리포트 시간 {0}초 · 재생 레퍼런스 없음; 시간 표시 전용.",
|
|
1604
1609
|
"Request failed": "요청 실패",
|
|
1605
1610
|
"Requirements": "요구사항",
|
|
1606
1611
|
"Reset": "초기화",
|
|
1607
1612
|
"Reset 0": "0으로 초기화",
|
|
1608
|
-
"Reset Build {0} to its inspected build.": "빌드 {0}을(를) 점검 중인 빌드로
|
|
1613
|
+
"Reset Build {0} to its inspected build.": "빌드 {0}을(를) 점검 중인 빌드로 초기화해요.",
|
|
1609
1614
|
"Reset layout": "레이아웃 초기화",
|
|
1610
1615
|
"Reset physics": "물리 초기화",
|
|
1611
|
-
"Reset returns to the inspected build": "초기화 시 점검 중인 빌드로
|
|
1612
|
-
"Reset to the inspected build.": "점검 중인 빌드로
|
|
1613
|
-
"Reset: Build {0} is back on its inspected build.": "초기화: 빌드 {0}이(가) 점검 중인 빌드로
|
|
1614
|
-
"Reset: Build {0} is back on its inspected build; no pending animation ops.": "초기화: 빌드 {0}이(가) 점검 중인 빌드로 돌아왔으며 보류 중인 애니메이션 작업이
|
|
1615
|
-
"Reset: no pending animation ops.": "초기화: 보류 중인 애니메이션 작업이
|
|
1616
|
-
"Reset: the inspected build is on the stage. The draft keeps the last applied state.": "초기화: 스테이지에 점검 중인 빌드가
|
|
1617
|
-
"Reset: the inspected build is on the stage; no pending animation ops.": "초기화: 스테이지에 점검 중인 빌드가 표시되며 보류 중인 애니메이션 작업이
|
|
1618
|
-
"Reset: the inspected build is on the stage; no pending ops.": "초기화: 스테이지에 점검 중인 빌드가 표시되며 보류 중인 작업이
|
|
1619
|
-
"Reset: the inspected build is on the stage; no pending ops; the dial is at 0.": "초기화: 스테이지에 점검 중인 빌드가 표시되며 보류 중인 작업이 없고 다이얼은 0
|
|
1620
|
-
"Reset: the inspected build is on the stage; no pending ops; the preview is cleared.": "초기화: 스테이지에 점검 중인 빌드가 표시되며 보류 중인 작업이 없고 미리보기가
|
|
1621
|
-
"Reset: the inspected build is on the stage; the draft's delta is restored over its setup mesh": "초기화: 스테이지에 점검 중인 빌드가 표시되며 셋업 메시 위에 초안의 델타가
|
|
1622
|
-
"Reset: the inspected build is on the stage; the pending entry is the config's.": "초기화: 스테이지에 점검 중인 빌드가 표시되며 보류 항목은 설정의 원본
|
|
1616
|
+
"Reset returns to the inspected build": "초기화 시 점검 중인 빌드로 돌아가요",
|
|
1617
|
+
"Reset to the inspected build.": "점검 중인 빌드로 초기화했어요.",
|
|
1618
|
+
"Reset: Build {0} is back on its inspected build.": "초기화: 빌드 {0}이(가) 점검 중인 빌드로 돌아왔어요.",
|
|
1619
|
+
"Reset: Build {0} is back on its inspected build; no pending animation ops.": "초기화: 빌드 {0}이(가) 점검 중인 빌드로 돌아왔으며 보류 중인 애니메이션 작업이 없어요.",
|
|
1620
|
+
"Reset: no pending animation ops.": "초기화: 보류 중인 애니메이션 작업이 없어요.",
|
|
1621
|
+
"Reset: the inspected build is on the stage. The draft keeps the last applied state.": "초기화: 스테이지에 점검 중인 빌드가 표시돼요. 초안은 마지막 적용 상태를 유지해요.",
|
|
1622
|
+
"Reset: the inspected build is on the stage; no pending animation ops.": "초기화: 스테이지에 점검 중인 빌드가 표시되며 보류 중인 애니메이션 작업이 없어요.",
|
|
1623
|
+
"Reset: the inspected build is on the stage; no pending ops.": "초기화: 스테이지에 점검 중인 빌드가 표시되며 보류 중인 작업이 없어요.",
|
|
1624
|
+
"Reset: the inspected build is on the stage; no pending ops; the dial is at 0.": "초기화: 스테이지에 점검 중인 빌드가 표시되며 보류 중인 작업이 없고 다이얼은 0이에요.",
|
|
1625
|
+
"Reset: the inspected build is on the stage; no pending ops; the preview is cleared.": "초기화: 스테이지에 점검 중인 빌드가 표시되며 보류 중인 작업이 없고 미리보기가 초기화됐어요.",
|
|
1626
|
+
"Reset: the inspected build is on the stage; the draft's delta is restored over its setup mesh": "초기화: 스테이지에 점검 중인 빌드가 표시되며 셋업 메시 위에 초안의 델타가 복원됐어요",
|
|
1627
|
+
"Reset: the inspected build is on the stage; the pending entry is the config's.": "초기화: 스테이지에 점검 중인 빌드가 표시되며 보류 항목은 설정의 원본 항목이에요.",
|
|
1623
1628
|
"Resize ": "크기 조절: ",
|
|
1624
1629
|
"Resize Inspector": "인스펙터 크기 조절",
|
|
1625
1630
|
"Resize Parts and settings": "파츠 및 설정 크기 조절",
|
|
@@ -1631,19 +1636,19 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1631
1636
|
"Resolved public attachment: ": "해석된 공개 어태치먼트: ",
|
|
1632
1637
|
"Resolved public attachment: {0} / {1}": "확인된 공개 어태치먼트: {0} / {1}",
|
|
1633
1638
|
"Restored local draft · not submitted": "로컬 초안 복원됨 · 제출되지 않음",
|
|
1634
|
-
"Restoring source-bound view · inspection controls temporarily paused.": "소스 바인딩된 뷰 복원 중 · 점검 컨트롤이 일시
|
|
1639
|
+
"Restoring source-bound view · inspection controls temporarily paused.": "소스 바인딩된 뷰 복원 중 · 점검 컨트롤이 일시 중지됐어요.",
|
|
1635
1640
|
"Retarget": "리타겟",
|
|
1636
1641
|
"Retarget lines": "리타겟 결과 줄",
|
|
1637
1642
|
"Retarget {0} from {1}": "{1}에서 {0} 리타겟",
|
|
1638
1643
|
"Retargeted ": "리타겟됨 ",
|
|
1639
|
-
"Retargeted \"{0}\" from {1} with {2} {3} · {4} · {5} · {6} · Reset returns to the inspected build": "{2} {3}로 {1}에서 \"{0}\" 리타겟됨 · {4} · {5} · {6} · 초기화 시 점검 중인 빌드로
|
|
1644
|
+
"Retargeted \"{0}\" from {1} with {2} {3} · {4} · {5} · {6} · Reset returns to the inspected build": "{2} {3}로 {1}에서 \"{0}\" 리타겟됨 · {4} · {5} · {6} · 초기화 시 점검 중인 빌드로 돌아가요",
|
|
1640
1645
|
"Retargeting {0} as \"{1}\" on Build {2}…": "빌드 {2}에서 {0}을(를) \"{1}\"(으)로 리타겟 중…",
|
|
1641
1646
|
"Retargeting {0} as \"{1}\" with {2} {3}: {4}retarget, compile…": "{2} {3}로 {0}을(를) \"{1}\"(으)로 리타겟 중: {4}retarget, 컴파일…",
|
|
1642
1647
|
"Retargeting…": "리타겟 중…",
|
|
1643
1648
|
"Return the stage to the applied build it showed before a row was loaded": "행을 불러오기 전에 표시하던 적용된 빌드로 스테이지 되돌리기",
|
|
1644
1649
|
"Return the stage to the inspected build": "검사 대상 빌드로 스테이지 되돌리기",
|
|
1645
|
-
"Return the stage to {0}; the package is unchanged": "스테이지를 {0}(으)로
|
|
1646
|
-
"Return to the inspected build? The applied delta stays in the local draft.": "점검 중인 빌드로 돌아갈까요? 적용된 델타는 로컬 초안에
|
|
1650
|
+
"Return the stage to {0}; the package is unchanged": "스테이지를 {0}(으)로 되돌려요; 패키지는 변경되지 않아요",
|
|
1651
|
+
"Return to the inspected build? The applied delta stays in the local draft.": "점검 중인 빌드로 돌아갈까요? 적용된 델타는 로컬 초안에 유지돼요.",
|
|
1647
1652
|
"Revert": "되돌리기",
|
|
1648
1653
|
"Revert {0}": "{0} 되돌리기",
|
|
1649
1654
|
"Revert {0} {1}": "{0} {1} 되돌리기",
|
|
@@ -1656,7 +1661,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1656
1661
|
"Review pre-check": "리뷰 사전 점검",
|
|
1657
1662
|
"Review pre-check in the config loader's names": "설정 로더 이름 기준 리뷰 사전 점검",
|
|
1658
1663
|
"Review status": "리뷰 상태",
|
|
1659
|
-
"Review's pre-check refuses the pending idle (lines above); the producer would refuse it by the same name": "리뷰 사전 검사가 보류 중인 아이들을
|
|
1664
|
+
"Review's pre-check refuses the pending idle (lines above); the producer would refuse it by the same name": "리뷰 사전 검사가 보류 중인 아이들을 거부했어요(위의 줄 참조). 프로듀서도 동일한 이름으로 거부해요",
|
|
1660
1665
|
"Reviewed source": "리뷰된 소스",
|
|
1661
1666
|
"Rig": "리그",
|
|
1662
1667
|
"Rig field handles": "리그 필드 핸들",
|
|
@@ -1670,9 +1675,9 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1670
1675
|
"Rig spec: {0} bones, {1} slots, {2} mesh slot(s), {3} ik/transform constraint(s), {4} animation(s){5}.": "리그 사양: 본 {0}개, 슬롯 {1}개, 메시 슬롯 {2}개, IK/트랜스폼 제약 조건 {3}개, 애니메이션 {4}개{5}.",
|
|
1671
1676
|
"Rigid part": "강체 파츠",
|
|
1672
1677
|
"Rotate": "회전",
|
|
1673
|
-
"Rows above the line (rig px, y down) are drawn on the still bone and do not blink. propose drafts one for a lash; the producer takes any region on an eye bone. Drag the row on the stage.": "선 위의 행(리그 px, 아래쪽이 +y)은 고정 본에 그려지며 깜빡이지
|
|
1678
|
+
"Rows above the line (rig px, y down) are drawn on the still bone and do not blink. propose drafts one for a lash; the producer takes any region on an eye bone. Drag the row on the stage.": "선 위의 행(리그 px, 아래쪽이 +y)은 고정 본에 그려지며 깜빡이지 않아요. propose는 속눈썹용 행을 초안으로 작성하며 프로듀서는 눈 본 위의 모든 영역을 허용해요. 스테이지에서 행을 드래그하세요.",
|
|
1674
1679
|
"Run readings": "측정 실행",
|
|
1675
|
-
"Run the installed producer (rig-parts remesh) on these regions or landmarks into a scratch build and load it here; the package is unchanged": "설치된 프로듀서(rig-parts remesh)를 이 영역 또는 랜드마크에 대해 스크래치 빌드로 실행하고 여기에
|
|
1680
|
+
"Run the installed producer (rig-parts remesh) on these regions or landmarks into a scratch build and load it here; the package is unchanged": "설치된 프로듀서(rig-parts remesh)를 이 영역 또는 랜드마크에 대해 스크래치 빌드로 실행하고 여기에 불러와요 (패키지는 변경되지 않음)",
|
|
1676
1681
|
"Running readings of {0}: {1} of {2} done…": "{0} 측정 실행 중: {2}개 중 {1}개 완료…",
|
|
1677
1682
|
"Running the folds reading of {0}…": "{0} 접힘(folds) 측정 실행 중…",
|
|
1678
1683
|
"Running {0} reading(s) of {1} on Build {2}…": "빌드 {2}에서 {1}의 측정 {0}개 실행 중…",
|
|
@@ -1693,35 +1698,35 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1693
1698
|
"SOUND CUES": "사운드 큐",
|
|
1694
1699
|
"SOURCE FILES · READ ONLY": "소스 파일 · 읽기 전용",
|
|
1695
1700
|
"STOPS · INWARD / OUTWARD ARCS": "STOPS · 안쪽 / 바깥쪽 호",
|
|
1696
|
-
"STRIP_REFERENCE_TIME: finite time and decoded frames required": "STRIP_REFERENCE_TIME: 유한한 시간과 디코딩된 프레임이
|
|
1701
|
+
"STRIP_REFERENCE_TIME: finite time and decoded frames required": "STRIP_REFERENCE_TIME: 유한한 시간과 디코딩된 프레임이 필요해요",
|
|
1697
1702
|
"STRUCTURED FEEDBACK": "구조화된 피드백",
|
|
1698
|
-
"Same-origin Origin required": "동일 출처(Same-origin) Origin이
|
|
1703
|
+
"Same-origin Origin required": "동일 출처(Same-origin) Origin이 필요해요",
|
|
1699
1704
|
"Saved ": "저장된 ",
|
|
1700
|
-
"Saved animation is absent from this rig": "저장된 애니메이션이 이 리그에
|
|
1701
|
-
"Saved browser preferences loaded.": "저장된 브라우저 환경설정을
|
|
1702
|
-
"Saved browser preferences were refused: {0}. Current page defaults remain usable.": "저장된 브라우저 환경설정이
|
|
1703
|
-
"Saved camera is unavailable in this single review": "이 단일 리뷰에서는 저장된 카메라를 사용할 수
|
|
1704
|
-
"Saved checkpoint is absent": "저장된 체크포인트가
|
|
1705
|
-
"Saved comparison animation/reference requires a different source binding": "저장된 비교 애니메이션/레퍼런스에 다른 소스 바인딩이
|
|
1705
|
+
"Saved animation is absent from this rig": "저장된 애니메이션이 이 리그에 없어요",
|
|
1706
|
+
"Saved browser preferences loaded.": "저장된 브라우저 환경설정을 불러왔어요.",
|
|
1707
|
+
"Saved browser preferences were refused: {0}. Current page defaults remain usable.": "저장된 브라우저 환경설정이 거부됐어요: {0}. 현재 페이지 기본값은 계속 사용할 수 있어요.",
|
|
1708
|
+
"Saved camera is unavailable in this single review": "이 단일 리뷰에서는 저장된 카메라를 사용할 수 없어요",
|
|
1709
|
+
"Saved checkpoint is absent": "저장된 체크포인트가 없어요",
|
|
1710
|
+
"Saved comparison animation/reference requires a different source binding": "저장된 비교 애니메이션/레퍼런스에 다른 소스 바인딩이 필요해요",
|
|
1706
1711
|
"Saved environment not restored: {0}": "저장된 환경이 복원되지 않음: {0}",
|
|
1707
1712
|
"Saved feedback and inspection context": "저장된 피드백 및 점검 컨텍스트",
|
|
1708
|
-
"Saved inspection axis is unavailable or outside its range": "저장된 점검 축을 사용할 수 없거나 범위를
|
|
1709
|
-
"Saved inspection time is outside the selected clip/reference": "저장된 점검 시간이 선택된 클립/레퍼런스 범위를
|
|
1710
|
-
"Saved local draft conflicts with the current submitted review. Server status is unchanged; download it or explicitly recover as pending.": "저장된 로컬 초안이 현재 제출된 리뷰와
|
|
1711
|
-
"Saved local draft conflicts with the current submitted review. Server status is unchanged; download or discard it.": "저장된 로컬 초안이 현재 제출된 리뷰와
|
|
1712
|
-
"Saved local draft was not restored: {0}. It remains in storage for recovery.": "저장된 로컬 초안이 복원되지
|
|
1713
|
+
"Saved inspection axis is unavailable or outside its range": "저장된 점검 축을 사용할 수 없거나 범위를 벗어났어요",
|
|
1714
|
+
"Saved inspection time is outside the selected clip/reference": "저장된 점검 시간이 선택된 클립/레퍼런스 범위를 벗어났어요",
|
|
1715
|
+
"Saved local draft conflicts with the current submitted review. Server status is unchanged; download it or explicitly recover as pending.": "저장된 로컬 초안이 현재 제출된 리뷰와 충돌해요. 서버 상태는 변경되지 않았으며 다운로드하거나 보류 상태로 명시적 복구하세요.",
|
|
1716
|
+
"Saved local draft conflicts with the current submitted review. Server status is unchanged; download or discard it.": "저장된 로컬 초안이 현재 제출된 리뷰와 충돌해요. 서버 상태는 변경되지 않았으며 다운로드하거나 폐기하세요.",
|
|
1717
|
+
"Saved local draft was not restored: {0}. It remains in storage for recovery.": "저장된 로컬 초안이 복원되지 않았어요: {0}. 복구를 위해 저장소에 유지돼요.",
|
|
1713
1718
|
"Saved panel selection unavailable: {0}": "저장된 패널 선택을 사용할 수 없음: {0}",
|
|
1714
|
-
"Saved part preset is absent": "저장된 파츠 프리셋이
|
|
1715
|
-
"Saved pose person is absent": "저장된 포즈 인물이
|
|
1716
|
-
"Saved pose reference is unavailable": "저장된 포즈 레퍼런스를 사용할 수
|
|
1717
|
-
"Saved reference camera has no selected image/video/pose": "저장된 레퍼런스 카메라에 선택된 이미지/비디오/포즈가
|
|
1718
|
-
"Saved reference did not load": "저장된 레퍼런스를 불러오지
|
|
1719
|
-
"Saved reference image unavailable": "저장된 레퍼런스 이미지를 사용할 수
|
|
1720
|
-
"Saved reference inspection could not settle": "저장된 레퍼런스 점검이 안정화되지
|
|
1721
|
-
"Saved reference is not declared": "저장된 레퍼런스가 선언되어 있지
|
|
1722
|
-
"Saved reference metadata unavailable": "저장된 레퍼런스 메타데이터를 사용할 수
|
|
1723
|
-
"Saved rig camera is unavailable": "저장된 리그 카메라를 사용할 수
|
|
1724
|
-
"Saved single-rig camera is unavailable in comparison": "비교 모드에서는 저장된 단일 리그 카메라를 사용할 수
|
|
1719
|
+
"Saved part preset is absent": "저장된 파츠 프리셋이 없어요",
|
|
1720
|
+
"Saved pose person is absent": "저장된 포즈 인물이 없어요",
|
|
1721
|
+
"Saved pose reference is unavailable": "저장된 포즈 레퍼런스를 사용할 수 없어요",
|
|
1722
|
+
"Saved reference camera has no selected image/video/pose": "저장된 레퍼런스 카메라에 선택된 이미지/비디오/포즈가 없어요",
|
|
1723
|
+
"Saved reference did not load": "저장된 레퍼런스를 불러오지 못했어요",
|
|
1724
|
+
"Saved reference image unavailable": "저장된 레퍼런스 이미지를 사용할 수 없어요",
|
|
1725
|
+
"Saved reference inspection could not settle": "저장된 레퍼런스 점검이 안정화되지 못했어요",
|
|
1726
|
+
"Saved reference is not declared": "저장된 레퍼런스가 선언되어 있지 않아요",
|
|
1727
|
+
"Saved reference metadata unavailable": "저장된 레퍼런스 메타데이터를 사용할 수 없어요",
|
|
1728
|
+
"Saved rig camera is unavailable": "저장된 리그 카메라를 사용할 수 없어요",
|
|
1729
|
+
"Saved single-rig camera is unavailable in comparison": "비교 모드에서는 저장된 단일 리그 카메라를 사용할 수 없어요",
|
|
1725
1730
|
"Saved {0} camera is unavailable": "저장된 {0} 카메라를 사용할 수 없음",
|
|
1726
1731
|
"Scrub by frame": "프레임 단위 스크럽",
|
|
1727
1732
|
"Seam": "심(이음매)",
|
|
@@ -1748,37 +1753,37 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1748
1753
|
"Select a target named in the report": "리포트에 명시된 타깃 선택",
|
|
1749
1754
|
"Select a target type and defect or quality category.": "대상 유형과 결함 또는 품질 카테고리를 선택하세요.",
|
|
1750
1755
|
"Select a target type first.": "먼저 대상 유형을 선택하세요.",
|
|
1751
|
-
"Select an actual slot in the parts explorer. Selection preserves animation, time and physics history.": "파츠 탐색기에서 실제 슬롯을 선택하세요. 선택 시 애니메이션, 시간 및 물리 이력이
|
|
1756
|
+
"Select an actual slot in the parts explorer. Selection preserves animation, time and physics history.": "파츠 탐색기에서 실제 슬롯을 선택하세요. 선택 시 애니메이션, 시간 및 물리 이력이 보존돼요.",
|
|
1752
1757
|
"Select an animation clip to inspect or edit keys.": "키를 점검하거나 편집할 애니메이션 클립을 선택하세요.",
|
|
1753
1758
|
"Select an integer frame within the explicit clock bounds.": "명시적 클록 범위 내의 정수 프레임을 선택하세요.",
|
|
1754
1759
|
"Select bone": "본 선택",
|
|
1755
1760
|
"Select bone {0}": "본 {0} 선택",
|
|
1756
1761
|
"Select category": "카테고리 선택",
|
|
1757
1762
|
"Select explicit time": "명시적 시간 선택",
|
|
1758
|
-
"Select in context or enable Solo. Thumbnails are each slot's declared page region; a type icon stands in where the model declares none. Atlas pages are not part thumbnails.": "컨텍스트 내에서 선택하거나 솔로(Solo)를 켜세요. 썸네일은 각 슬롯에 선언된 페이지 영역이며, 선언되지 않은 경우 타입 아이콘이 대신
|
|
1763
|
+
"Select in context or enable Solo. Thumbnails are each slot's declared page region; a type icon stands in where the model declares none. Atlas pages are not part thumbnails.": "컨텍스트 내에서 선택하거나 솔로(Solo)를 켜세요. 썸네일은 각 슬롯에 선언된 페이지 영역이며, 선언되지 않은 경우 타입 아이콘이 대신 표시돼요. 아틀라스 페이지는 파츠 썸네일이 아니에요.",
|
|
1759
1764
|
"Select or drag bone {0}": "본 {0} 선택 또는 드래그",
|
|
1760
1765
|
"Select person": "인물 선택",
|
|
1761
1766
|
"Select reference video": "레퍼런스 비디오 선택",
|
|
1762
1767
|
"Select target": "대상 선택",
|
|
1763
1768
|
"Selected part": "선택된 파츠",
|
|
1764
1769
|
"Selected report time {0} s.": "리포트 시간 {0}초 선택됨.",
|
|
1765
|
-
"Selected slot fitted.": "선택한 슬롯에
|
|
1770
|
+
"Selected slot fitted.": "선택한 슬롯에 맞췄어요.",
|
|
1766
1771
|
"Selected slot fitted{0}.": "선택한 슬롯에 맞춤{0}.",
|
|
1767
1772
|
"Selected {0} editable key(s); skipped read-only track(s): {1} (ANIMATION_TRACK_READ_ONLY).": "편집 가능한 키 {0}개 선택됨; 읽기 전용 트랙 건너뜀: {1} (ANIMATION_TRACK_READ_ONLY).",
|
|
1768
1773
|
"Selected {0} key(s) across {1} track(s).": "트랙 {1}개에 걸쳐 키 {0}개 선택됨.",
|
|
1769
1774
|
"Selection bounds unavailable: {0}": "선택 경계를 사용할 수 없음: {0}",
|
|
1770
|
-
"Selection bounds · world units / Y up: x {0}, y {1}, width {2}, height {3}. Conservative geometry/clip bounds; fit uses the existing 0.25–8× camera range.": "선택 경계 · 월드 단위 / 위쪽이 +Y: x {0}, y {1}, 너비 {2}, 높이 {3}. 보수적인 지오메트리/클립 경계이며 맞춤은 기존 0.25–8× 카메라 범위를
|
|
1771
|
-
"Selection changed. Check the ranges and frame-basis report before downloading.": "선택이
|
|
1772
|
-
"Selection changed. Check the ranges, animation and reference video before downloading.": "선택이
|
|
1775
|
+
"Selection bounds · world units / Y up: x {0}, y {1}, width {2}, height {3}. Conservative geometry/clip bounds; fit uses the existing 0.25–8× camera range.": "선택 경계 · 월드 단위 / 위쪽이 +Y: x {0}, y {1}, 너비 {2}, 높이 {3}. 보수적인 지오메트리/클립 경계이며 맞춤은 기존 0.25–8× 카메라 범위를 사용해요.",
|
|
1776
|
+
"Selection changed. Check the ranges and frame-basis report before downloading.": "선택이 변경됐어요. 다운로드하기 전에 범위와 프레임 기준 리포트를 확인하세요.",
|
|
1777
|
+
"Selection changed. Check the ranges, animation and reference video before downloading.": "선택이 변경됐어요. 다운로드하기 전에 범위, 애니메이션 및 레퍼런스 비디오를 확인하세요.",
|
|
1773
1778
|
"Semi-axis x": "반축 x",
|
|
1774
1779
|
"Semi-axis y": "반축 y",
|
|
1775
|
-
"Send the delta to the producer (rig-parts remesh --delta) and load the scratch revision in place; nothing is written into the package": "델타를 프로듀서(rig-parts remesh --delta)로 보내고 스크래치 리비전을 제자리에
|
|
1780
|
+
"Send the delta to the producer (rig-parts remesh --delta) and load the scratch revision in place; nothing is written into the package": "델타를 프로듀서(rig-parts remesh --delta)로 보내고 스크래치 리비전을 제자리에 불러와요 (패키지에는 아무것도 기록되지 않음)",
|
|
1776
1781
|
"Sequence": "시퀀스",
|
|
1777
|
-
"Server is closing": "서버가 종료
|
|
1778
|
-
"Session payload exceeds 1 MiB": "세션 페이로드가 1 MiB를
|
|
1782
|
+
"Server is closing": "서버가 종료 중이에요",
|
|
1783
|
+
"Session payload exceeds 1 MiB": "세션 페이로드가 1 MiB를 초과해요",
|
|
1779
1784
|
"Settings": "설정",
|
|
1780
1785
|
"Setup": "셋업",
|
|
1781
|
-
"Setup and Animate tools target Build {0} ({1}): Apply rebuilds only Build {2} in scratch; supplied source art and compiled packages on disk are never modified.": "셋업 및 애니메이트 도구는 빌드 {0} ({1})을(를) 대상으로
|
|
1786
|
+
"Setup and Animate tools target Build {0} ({1}): Apply rebuilds only Build {2} in scratch; supplied source art and compiled packages on disk are never modified.": "셋업 및 애니메이트 도구는 빌드 {0} ({1})을(를) 대상으로 해요: 적용은 임시 빌드에서 빌드 {2}만 다시 빌드하며 디스크의 제공된 소스 아트와 컴파일된 패키지는 절대 수정되지 않아요.",
|
|
1782
1787
|
"Setup blocks": "셋업 블록",
|
|
1783
1788
|
"Shared comparison time": "공유 비교 시간",
|
|
1784
1789
|
"Shared range 0–{0} s · Neither side is independently clamped or looped": "공유 범위 0–{0}초 · 어느 쪽도 개별적으로 클램핑되거나 루프되지 않음",
|
|
@@ -1788,13 +1793,13 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1788
1793
|
"Side: {0}": "사이드: {0}",
|
|
1789
1794
|
"Slot": "슬롯",
|
|
1790
1795
|
"Slot ": "슬롯 ",
|
|
1791
|
-
"Small producer config fields, each a config patch op: the bone a rigid part rides (<code>/regions/<part></code>), a lash's blink still row (<code>/motion/blink/still/<part></code>, dragged on the stage), a stop's inward / outward bounds (<code>/stops/<i></code>, arcs dragged at the pivot), a bone's inherit mode (<code>/bones/<i>/inherit</code>; a chain's <code>link_inherit</code>) and <code>turn</code>'s pivot and per-part depth (<code>/turn/pivot</code>, <code>/turn/depths/<part></code>). <strong>Apply</strong> rebuilds the whole rig (<code>rig --config</code>, then <code>check</code>) and needs the reproduced baseline; the producer's refusal is shown as printed. The dial only previews the drawn build's <code>turn</code> bone and is never recorded. Reset returns to the inspected build and clears the pending ops.": "각각 설정 패치 연산이 되는 소규모 프로듀서 설정
|
|
1792
|
-
"Small producer config fields, each a config patch op: the bone a rigid part rides (<code>/regions/<part></code>), a lash's blink still row (<code>/motion/blink/still/<part></code>, dragged on the stage), a stop's inward / outward bounds (<code>/stops/<i></code>, arcs dragged at the pivot), a bone's inherit mode (<code>/bones/<i>/inherit</code>; a chain's <code>link_inherit</code>) and <code>turn</code>'s pivot and per-part depth (<code>/turn/pivot</code>, <code>/turn/depths/<part></code>). <strong>Apply</strong> rebuilds the whole rig (<code>rig --config</code>, then <code>check</code>) and needs the reproduced baseline; the producer's refusal is shown as printed. The dial only previews the drawn build's <code>turn</code> bone and is never recorded. Reset returns to the inspected build and clears the pending ops.": "각각 설정 패치 연산이 되는 소규모 프로듀서 설정
|
|
1796
|
+
"Small producer config fields, each a config patch op: the bone a rigid part rides (<code>/regions/<part></code>), a lash's blink still row (<code>/motion/blink/still/<part></code>, dragged on the stage), a stop's inward / outward bounds (<code>/stops/<i></code>, arcs dragged at the pivot), a bone's inherit mode (<code>/bones/<i>/inherit</code>; a chain's <code>link_inherit</code>) and <code>turn</code>'s pivot and per-part depth (<code>/turn/pivot</code>, <code>/turn/depths/<part></code>). <strong>Apply</strong> rebuilds the whole rig (<code>rig --config</code>, then <code>check</code>) and needs the reproduced baseline; the producer's refusal is shown as printed. The dial only previews the drawn build's <code>turn</code> bone and is never recorded. Reset returns to the inspected build and clears the pending ops.": "각각 설정 패치 연산이 되는 소규모 프로듀서 설정 필드예요: 리지드 파츠가 따르는 본(<code>/regions/<part></code>), 속눈썹 블링크 정지 행(<code>/motion/blink/still/<part></code>, 스테이지에서 드래그), 스톱의 안쪽/바깥쪽 한계(<code>/stops/<i></code>, 피벗에서 호 드래그), 본의 상속 모드(<code>/bones/<i>/inherit</code>; 체인의 <code>link_inherit</code>), 그리고 <code>turn</code>의 피벗 및 파츠별 깊이(<code>/turn/pivot</code>, <code>/turn/depths/<part></code>). <strong>적용</strong>은 전체 리그를 리빌드(<code>rig --config</code> 후 <code>check</code>)하며 재현된 베이스라인이 필요하고, 프로듀서의 거부는 출력된 그대로 표시돼요. 다이얼은 현재 그려진 빌드의 <code>turn</code> 본만 미리 보여주며 기록되지 않아요. 초기화는 검사 대상 빌드로 되돌리고 대기 연산을 지워요.",
|
|
1797
|
+
"Small producer config fields, each a config patch op: the bone a rigid part rides (<code>/regions/<part></code>), a lash's blink still row (<code>/motion/blink/still/<part></code>, dragged on the stage), a stop's inward / outward bounds (<code>/stops/<i></code>, arcs dragged at the pivot), a bone's inherit mode (<code>/bones/<i>/inherit</code>; a chain's <code>link_inherit</code>) and <code>turn</code>'s pivot and per-part depth (<code>/turn/pivot</code>, <code>/turn/depths/<part></code>). <strong>Apply</strong> rebuilds the whole rig (<code>rig --config</code>, then <code>check</code>) and needs the reproduced baseline; the producer's refusal is shown as printed. The dial only previews the drawn build's <code>turn</code> bone and is never recorded. Reset returns to the inspected build and clears the pending ops.": "각각 설정 패치 연산이 되는 소규모 프로듀서 설정 필드예요: 리지드 파츠가 따르는 본(<code>/regions/<part></code>), 속눈썹 블링크 정지 행(<code>/motion/blink/still/<part></code>, 스테이지에서 드래그), 스톱의 안쪽/바깥쪽 한계(<code>/stops/<i></code>, 피벗에서 호 드래그), 본의 상속 모드(<code>/bones/<i>/inherit</code>; 체인의 <code>link_inherit</code>), 그리고 <code>turn</code>의 피벗 및 파츠별 깊이(<code>/turn/pivot</code>, <code>/turn/depths/<part></code>). <strong>적용</strong>은 전체 리그를 리빌드(<code>rig --config</code> 후 <code>check</code>)하며 재현된 베이스라인이 필요하고, 프로듀서의 거부는 출력된 그대로 표시돼요. 다이얼은 현재 그려진 빌드의 <code>turn</code> 본만 미리 보여주며 기록되지 않아요. 초기화는 검사 대상 빌드로 되돌리고 대기 연산을 지워요.",
|
|
1793
1798
|
"Solo": "솔로",
|
|
1794
1799
|
"Solo selected slot": "선택된 슬롯 솔로 표시",
|
|
1795
1800
|
"Sound": "사운드",
|
|
1796
1801
|
"Source event details": "소스 이벤트 상세",
|
|
1797
|
-
"Source files remain unchanged.": "소스 파일은 변경되지 않고
|
|
1802
|
+
"Source files remain unchanged.": "소스 파일은 변경되지 않고 유지돼요.",
|
|
1798
1803
|
"Source provenance": "소스 출처 정보",
|
|
1799
1804
|
"Source report": "소스 리포트",
|
|
1800
1805
|
"Source rule (optional)": "소스 규칙 (선택)",
|
|
@@ -1802,7 +1807,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1802
1807
|
"Source {0}{1}{2}": "소스 {0}{1}{2}",
|
|
1803
1808
|
"Sources and settings": "소스 및 설정",
|
|
1804
1809
|
"Spacing": "간격(스페이싱)",
|
|
1805
|
-
"Specify a frame range and actual bone or slot name to add feedback. Motion keys are not edited.": "피드백을 추가하려면 프레임 범위와 실제 본 또는 슬롯 이름을 지정하세요. 모션 키는 편집되지
|
|
1810
|
+
"Specify a frame range and actual bone or slot name to add feedback. Motion keys are not edited.": "피드백을 추가하려면 프레임 범위와 실제 본 또는 슬롯 이름을 지정하세요. 모션 키는 편집되지 않아요.",
|
|
1806
1811
|
"Stage bone pose mode": "스테이지 본 포즈 모드",
|
|
1807
1812
|
"Start": "시작",
|
|
1808
1813
|
"Start frame": "시작 프레임",
|
|
@@ -1811,80 +1816,80 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1811
1816
|
"Still building": "아직 빌드 중",
|
|
1812
1817
|
"Still row part": "고정 행 파츠",
|
|
1813
1818
|
"Stored animation channel": "저장된 애니메이션 채널",
|
|
1814
|
-
"Stored curve and handles are exact. Runtime evaluation uses Play’s ten-piece Float32 interpolation; the cursor may sit off the cubic. Values are authored locals before constraints and previews.": "저장된 커브와 핸들은 정확한
|
|
1819
|
+
"Stored curve and handles are exact. Runtime evaluation uses Play’s ten-piece Float32 interpolation; the cursor may sit off the cubic. Values are authored locals before constraints and previews.": "저장된 커브와 핸들은 정확한 값이에요. 런타임 평가는 Play의 10분할 Float32 보간을 사용하므로 커서가 3차 곡선에서 약간 벗어날 수 있어요. 값은 제약 및 미리보기 적용 전의 작성된 로컬 값이에요.",
|
|
1815
1820
|
"Stored curves": "저장된 커브",
|
|
1816
1821
|
"Stored key": "저장된 키",
|
|
1817
1822
|
"Stray": "스트레이(고립 조각)",
|
|
1818
|
-
"Strip closed; its scratch is removed.": "스트립이 닫혔으며 임시 데이터가
|
|
1823
|
+
"Strip closed; its scratch is removed.": "스트립이 닫혔으며 임시 데이터가 제거됐어요.",
|
|
1819
1824
|
"Strip export failed · HTTP {0}": "스트립 내보내기 실패 · HTTP {0}",
|
|
1820
|
-
"Strip inputs changed: sourceHash does not match loaded package": "스트립 입력 변경됨: sourceHash가 로드된 패키지와 일치하지
|
|
1821
|
-
"Strip of {0} on {1} settled in {2} s (at most {3} at once): {4} passing, {5} refused or failing. Labels only — nothing is applied; Load puts a row on the stage as pending.": "{1}의 {0} 스트립이 {2}초 만에 완료됨(동시 최대 {3}개): 통과 {4}개, 거부 또는 실패 {5}개. 라벨만 표시되며 적용되지
|
|
1825
|
+
"Strip inputs changed: sourceHash does not match loaded package": "스트립 입력 변경됨: sourceHash가 로드된 패키지와 일치하지 않아요",
|
|
1826
|
+
"Strip of {0} on {1} settled in {2} s (at most {3} at once): {4} passing, {5} refused or failing. Labels only — nothing is applied; Load puts a row on the stage as pending.": "{1}의 {0} 스트립이 {2}초 만에 완료됨(동시 최대 {3}개): 통과 {4}개, 거부 또는 실패 {5}개. 라벨만 표시되며 적용되지 않았어요. 불러오기를 누르면 행을 보류 상태로 스테이지에 올려요.",
|
|
1822
1827
|
"Strip of {0} on {1} settled: {2} passing.": "{1}의 {0} 스트립 완료됨: 통과 {2}개.",
|
|
1823
1828
|
"Strip {0}…: {1} of {2} settled · {3} s": "스트립 {0}…: {2}개 중 {1}개 완료 · {3}초",
|
|
1824
1829
|
"Submission failed: {0}": "제출 실패: {0}",
|
|
1825
1830
|
"Submit review": "리뷰 제출",
|
|
1826
|
-
"Submits server-verified file hashes and tool versions. Your selected review status is preserved.": "서버에서 검증된 파일 해시와 도구 버전을
|
|
1831
|
+
"Submits server-verified file hashes and tool versions. Your selected review status is preserved.": "서버에서 검증된 파일 해시와 도구 버전을 제출해요. 선택한 리뷰 상태가 보존돼요.",
|
|
1827
1832
|
"Submitted": "제출됨",
|
|
1828
|
-
"Submitted the selected review status and A/B/reference-video provenance.": "선택한 리뷰 상태와 A/B/레퍼런스 비디오 출처를
|
|
1829
|
-
"Submitted the selected review status, feedback and source provenance.": "선택한 리뷰 상태, 피드백 및 소스 출처를
|
|
1833
|
+
"Submitted the selected review status and A/B/reference-video provenance.": "선택한 리뷰 상태와 A/B/레퍼런스 비디오 출처를 제출했어요.",
|
|
1834
|
+
"Submitted the selected review status, feedback and source provenance.": "선택한 리뷰 상태, 피드백 및 소스 출처를 제출했어요.",
|
|
1830
1835
|
"Sync cameras": "카메라 동기화",
|
|
1831
1836
|
"Sync cameras by default": "기본으로 카메라 동기화",
|
|
1832
|
-
"Sync cameras links fit-relative zoom and viewport-relative pan across visible panes. Turn it off for independent Reference, A and B views. Toolbar zoom and Fit use the last active pane.": "카메라 동기화는 표시된 창 간에 맞춤 대비 줌과 뷰포트 대비 팬 이동을
|
|
1833
|
-
"Sync cameras links fit-relative zoom and viewport-relative pan across visible panes. Turn it off to inspect each pane independently. Toolbar zoom and Fit use the last active pane. Hold Space while dragging a video to pan without taking over its native controls.": "카메라 동기화는 표시된 창 간에 맞춤 대비 줌과 뷰포트 대비 팬 이동을
|
|
1837
|
+
"Sync cameras links fit-relative zoom and viewport-relative pan across visible panes. Turn it off for independent Reference, A and B views. Toolbar zoom and Fit use the last active pane.": "카메라 동기화는 표시된 창 간에 맞춤 대비 줌과 뷰포트 대비 팬 이동을 연결해요. 레퍼런스, A, B 뷰를 독립적으로 보려면 끄세요. 툴바의 줌과 맞춤은 마지막 활성 창을 기준으로 동작해요.",
|
|
1838
|
+
"Sync cameras links fit-relative zoom and viewport-relative pan across visible panes. Turn it off to inspect each pane independently. Toolbar zoom and Fit use the last active pane. Hold Space while dragging a video to pan without taking over its native controls.": "카메라 동기화는 표시된 창 간에 맞춤 대비 줌과 뷰포트 대비 팬 이동을 연결해요. 각 창을 독립적으로 검사하려면 끄세요. 툴바의 줌과 맞춤은 마지막 활성 창을 기준으로 동작해요. 비디오에서 Space를 누른 채 드래그하면 기본 비디오 컨트롤을 건드리지 않고 화면을 이동해요.",
|
|
1834
1839
|
"Synchronization trace": "동기화 추적",
|
|
1835
1840
|
"Synchronizing reference video and both rigs": "레퍼런스 비디오와 두 리그 동기화 중",
|
|
1836
1841
|
"System": "시스템",
|
|
1837
1842
|
"TEXTURE_STRETCH before and after Apply": "적용 전후 TEXTURE_STRETCH",
|
|
1838
|
-
"THUMBNAIL_AMBIGUOUS_REGION: {0} page regions are named \"{1}\" (sequence frames)": "THUMBNAIL_AMBIGUOUS_REGION: 페이지 영역 {0}개의 이름이 \"{1}\"
|
|
1839
|
-
"THUMBNAIL_NO_PAGE_REGION: the model declares no page region \"{0}\"": "THUMBNAIL_NO_PAGE_REGION: 모델에 페이지 영역 \"{0}\"이(가) 선언되어 있지
|
|
1840
|
-
"THUMBNAIL_PAGE_UNAVAILABLE: page {0} is not loaded": "THUMBNAIL_PAGE_UNAVAILABLE: 페이지 {0}이(가) 로드되지
|
|
1841
|
-
"THUMBNAIL_REGION_OUTSIDE_PAGE: \"{0}\" exceeds {1}": "THUMBNAIL_REGION_OUTSIDE_PAGE: \"{0}\"이(가) {1} 범위를
|
|
1843
|
+
"THUMBNAIL_AMBIGUOUS_REGION: {0} page regions are named \"{1}\" (sequence frames)": "THUMBNAIL_AMBIGUOUS_REGION: 페이지 영역 {0}개의 이름이 \"{1}\"이에요(시퀀스 프레임)",
|
|
1844
|
+
"THUMBNAIL_NO_PAGE_REGION: the model declares no page region \"{0}\"": "THUMBNAIL_NO_PAGE_REGION: 모델에 페이지 영역 \"{0}\"이(가) 선언되어 있지 않아요",
|
|
1845
|
+
"THUMBNAIL_PAGE_UNAVAILABLE: page {0} is not loaded": "THUMBNAIL_PAGE_UNAVAILABLE: 페이지 {0}이(가) 로드되지 않았어요",
|
|
1846
|
+
"THUMBNAIL_REGION_OUTSIDE_PAGE: \"{0}\" exceeds {1}": "THUMBNAIL_REGION_OUTSIDE_PAGE: \"{0}\"이(가) {1} 범위를 초과해요",
|
|
1842
1847
|
"THUMBNAIL_REGION_UNAVAILABLE: {0}": "THUMBNAIL_REGION_UNAVAILABLE: {0}",
|
|
1843
|
-
"THUMBNAIL_ROTATED_REGION: \"{0}\" is packed at {1}°": "THUMBNAIL_ROTATED_REGION: \"{0}\"이(가) {1}°로 패킹되어
|
|
1844
|
-
"THUMBNAIL_UNDECLARED: {0} / {1} is not in the catalog": "THUMBNAIL_UNDECLARED: {0} / {1}이(가) 카탈로그에
|
|
1848
|
+
"THUMBNAIL_ROTATED_REGION: \"{0}\" is packed at {1}°": "THUMBNAIL_ROTATED_REGION: \"{0}\"이(가) {1}°로 패킹되어 있어요",
|
|
1849
|
+
"THUMBNAIL_UNDECLARED: {0} / {1} is not in the catalog": "THUMBNAIL_UNDECLARED: {0} / {1}이(가) 카탈로그에 없어요",
|
|
1845
1850
|
"TURN · DEPTH, PIVOT AND THE DIAL": "TURN · 깊이, 피벗 및 다이얼",
|
|
1846
1851
|
"TURN_SMOOTHING_RANGE: use 1…100 s⁻¹": "TURN_SMOOTHING_RANGE: 1…100 s⁻¹ 범위를 사용하세요",
|
|
1847
|
-
"TURN_STATE_MODEL_MISMATCH: turn values reset for this build.": "TURN_STATE_MODEL_MISMATCH: 이 빌드에 대해 회전 값이
|
|
1848
|
-
"TURN_UNAVAILABLE: this inspected model has no supported turn dials": "TURN_UNAVAILABLE: 점검 중인 모델에 지원되는 회전 다이얼이
|
|
1852
|
+
"TURN_STATE_MODEL_MISMATCH: turn values reset for this build.": "TURN_STATE_MODEL_MISMATCH: 이 빌드에 대해 회전 값이 초기화됐어요.",
|
|
1853
|
+
"TURN_UNAVAILABLE: this inspected model has no supported turn dials": "TURN_UNAVAILABLE: 점검 중인 모델에 지원되는 회전 다이얼이 없어요",
|
|
1849
1854
|
"Tag": "태그",
|
|
1850
1855
|
"Target bone ": "대상 본 ",
|
|
1851
1856
|
"Target build": "타깃 빌드",
|
|
1852
1857
|
"Target name": "타깃 이름",
|
|
1853
1858
|
"Target type": "타깃 종류",
|
|
1854
1859
|
"Target: {0} / {1}": "대상: {0} / {1}",
|
|
1855
|
-
"The bar ({0}) is set on the slider once added; the producer reads {1}.": "기준치({0})는 추가 후 슬라이더에서 설정하며 프로듀서는 {1}을(를)
|
|
1860
|
+
"The bar ({0}) is set on the slider once added; the producer reads {1}.": "기준치({0})는 추가 후 슬라이더에서 설정하며 프로듀서는 {1}을(를) 읽어요.",
|
|
1856
1861
|
"The build's refusals, cut lines, recomposite, seam pairs and wall clock": "빌드의 거부, 컷 라인, 재합성, 심 쌍 및 소요 시간",
|
|
1857
|
-
"The config states no bones.": "설정에 선언된 본이
|
|
1858
|
-
"The config states no cut, patch or limb": "설정에 분할, 패치 또는 팔다리가 선언되어 있지
|
|
1859
|
-
"The config states no motion.blink.": "설정에 선언된 motion.blink가
|
|
1860
|
-
"The config states no regions.": "설정에 선언된 영역(regions)이
|
|
1861
|
-
"The config states no stops (adding one is out of scope).": "설정에 스톱이 선언되어 있지
|
|
1862
|
-
"The config states no turn.": "설정에 선언된 회전(turn)이
|
|
1863
|
-
"The current time is outside the explicit frame range. Enter a frame number to go to its exact time.": "현재 시간이 명시적 프레임 범위를
|
|
1864
|
-
"The dial holds the drawn build's turn bone at x (play adjust): it shows the build on the stage, not the pending depths — Apply builds those. Nothing is recorded.": "다이얼은 그려진 빌드의 회전 본을 x에
|
|
1865
|
-
"The drawn model has no turn bone; the dial is off.": "그려진 모델에 회전 본이 없어 다이얼이 꺼져
|
|
1866
|
-
"The pair finished CPU draw submission after the estimated next reference display boundary. Pause for exact inspection.": "추정된 다음 레퍼런스 표시 경계 이후에 쌍의 CPU 그리기 제출이
|
|
1867
|
-
"The pending entry is the config's entry.": "보류 중인 항목은 설정의 원본
|
|
1868
|
-
"The producer config's <code>assemble.cuts</code> polygons, <code>assemble.patches</code> boxes and each limb joint with its <code>range</code> arc, on the stage in rig px of the setup pose. Drag a vertex, a box corner or a joint, or edit the numbers: each change is a config patch op (<code>/assemble/cuts/<i>/polygon/<k></code>, <code>/assemble/patches/<i>/box</code>, <code>/limbs/<limb>/segments/<k>/range</code>; a joint is its bone's origin, <code>/bones/…</code>). A new cut or patch adds its entry and a <code>regions</code> bone. <strong>Apply</strong> runs <code>rig-parts build</code> (assemble → rig → check) from the declared painting and See-through runs into scratch and needs the reproduced baseline; the producer's refusals (<code>ASSEMBLE_CUT_*</code>, <code>ASSEMBLE_UNDER_*</code>, <code>CONFIG_LIMB_*</code>, <code>CONFIG_PART_UNIQUE</code>) are shown as printed, and the recomposite error map, the <code>seam pair</code> lines and the build's wall clock come back with the build. Review paints no <code>under</code> or <code>cap</code> image. Reset returns to the inspected build and clears the pending ops.": "프로듀서 설정의 <code>assemble.cuts</code> 다각형, <code>assemble.patches</code> 박스 및 각 사지(림) 관절과 그 <code>range</code> 호를 셋업 포즈의 리그 px 단위로 스테이지에
|
|
1869
|
-
"The producer config's <code>assemble.cuts</code> polygons, <code>assemble.patches</code> boxes and each limb joint with its <code>range</code> arc, on the stage in rig px of the setup pose. Drag a vertex, a box corner or a joint, or edit the numbers: each change is a config patch op (<code>/assemble/cuts/<i>/polygon/<k></code>, <code>/assemble/patches/<i>/box</code>, <code>/limbs/<limb>/segments/<k>/range</code>; a joint is its bone's origin, <code>/bones/…</code>). A new cut or patch adds its entry and a <code>regions</code> bone. <strong>Apply</strong> runs <code>rig-parts build</code> (assemble → rig → check) from the declared painting and See-through runs into scratch and needs the reproduced baseline; the producer's refusals (<code>ASSEMBLE_CUT_*</code>, <code>ASSEMBLE_UNDER_*</code>, <code>CONFIG_LIMB_*</code>, <code>CONFIG_PART_UNIQUE</code>) are shown as printed, and the recomposite error map, the <code>seam pair</code> lines and the build's wall clock come back with the build. Review paints no <code>under</code> or <code>cap</code> image. Reset returns to the inspected build and clears the pending ops.": "프로듀서 설정의 <code>assemble.cuts</code> 다각형, <code>assemble.patches</code> 박스 및 각 사지(림) 관절과 그 <code>range</code> 호를 셋업 포즈의 리그 px 단위로 스테이지에
|
|
1870
|
-
"The producer config's <code>cloth</code> block: one recipe per tag the installed reader accepts, with its fields as written. Each change is a config patch op at <code>/cloth/<tag>/…</code>. <strong>Show links</strong> draws the chains the tag's parts are meshed on, from the config's <code>points</code> and <code>tip</code> in rig px of the setup pose, and after an Apply the chains of the config the producer wrote. <strong>Apply</strong> runs <code>rig-parts propose --cloth --write-config</code> on the declared parts, painting and keypoints into scratch, then builds the written config (<code>rig-parts build</code> when the config declares <code>limbs</code>, else <code>rig --config</code>) and reloads it under the Environment's wind and gravity; the producer's refusals (<code>CONFIG_CLOTH_*</code>, <code>PROPOSE_CLOTH_DRAFTED</code>, <code>PROPOSE_CLOTH_PART</code>, <code>PROPOSE_WRITE_CONFIG_*</code>) are shown as printed. Review edits the recipe, never the drafted constraints. Reset returns to the inspected build and clears the pending ops.": "프로듀서 설정의 <code>cloth</code>
|
|
1871
|
-
"The producer config's <code>cloth</code> block: one recipe per tag the installed reader accepts, with its fields as written. Each change is a config patch op at <code>/cloth/<tag>/…</code>. <strong>Show links</strong> draws the chains the tag's parts are meshed on, from the config's <code>points</code> and <code>tip</code> in rig px of the setup pose, and after an Apply the chains of the config the producer wrote. <strong>Apply</strong> runs <code>rig-parts propose --cloth --write-config</code> on the declared parts, painting and keypoints into scratch, then builds the written config (<code>rig-parts build</code> when the config declares <code>limbs</code>, else <code>rig --config</code>) and reloads it under the Environment's wind and gravity; the producer's refusals (<code>CONFIG_CLOTH_*</code>, <code>PROPOSE_CLOTH_DRAFTED</code>, <code>PROPOSE_CLOTH_PART</code>, <code>PROPOSE_WRITE_CONFIG_*</code>) are shown as printed. Review edits the recipe, never the drafted constraints. Reset returns to the inspected build and clears the pending ops.": "프로듀서 설정의 <code>cloth</code>
|
|
1872
|
-
"The producer config's bones at their <code>at</code>, chain <code>points</code> and <code>tip</code> (rig px, the setup pose; the stage may be posed by an animation). Drag a handle on the stage or edit the numbers: each move is a config patch op at <code>/bones/<i>/at</code>, <code>/bones/<i>/points/<k></code> or <code>/bones/<i>/tip</code> naming its bone, moved in whole rig px. <strong>Check</strong> runs <code>propose --from-config</code> on a scratch copy of the patched config (LINT and coverage lines; LINT blocks nothing) and <code>compare</code> against the handoff config. <strong>Apply</strong> rebuilds the whole rig (<code>rig --config</code>, then <code>check</code>) and needs the reproduced baseline; Reset returns to the inspected build and clears the pending ops. Adding, removing or re-parenting bones is out of scope.": "프로듀서 설정의 본을 <code>at</code>, 체인 <code>points</code> 및 <code>tip</code> 위치(리그 px, 셋업 포즈 기준; 스테이지는 애니메이션 포즈일 수 있음)에
|
|
1873
|
-
"The producer config's bones at their <code>at</code>, chain <code>points</code> and <code>tip</code> (rig px, the setup pose; the stage may be posed by an animation). Drag a handle on the stage or edit the numbers: each move is a config patch op at <code>/bones/<i>/at</code>, <code>/bones/<i>/points/<k></code> or <code>/bones/<i>/tip</code> naming its bone, moved in whole rig px. <strong>Check</strong> runs <code>propose --from-config</code> on a scratch copy of the patched config (LINT and coverage lines; LINT blocks nothing) and <code>compare</code> against the handoff config. <strong>Apply</strong> rebuilds the whole rig (<code>rig --config</code>, then <code>check</code>) and needs the reproduced baseline; Reset returns to the inspected build and clears the pending ops. Adding, removing or re-parenting bones is out of scope.": "프로듀서 설정의 본을 <code>at</code>, 체인 <code>points</code> 및 <code>tip</code> 위치(리그 px, 셋업 포즈 기준; 스테이지는 애니메이션 포즈일 수 있음)에
|
|
1874
|
-
"The report target is absent from the current rig catalog; choose a target manually.": "리포트 대상이 현재 리그 카탈로그에
|
|
1875
|
-
"The same frame number in A and B is not assumed to mean the same time. Batch export uses each feedback side as its frame basis. Without frameTimes, PNG is refused and JSON preserves time: null.": "A와 B의 동일한 프레임 번호가 같은 시간을 의미한다고 가정하지
|
|
1876
|
-
"The schedule is the controls as a <code>rigc-environment/1</code> file from the clip's first frame: one step when the wind is steady, else one step per frame at 12 fps (between frames rigc holds the frame's value). A one-off Gust is not in it; Repeat puts gusts in it. Check under this world runs <code>rig-parts check --environment</code> on the build on the stage; the default-world line is that build's own check.": "스케줄은 클립의 첫 프레임부터 컨트롤 값을 담은 <code>rigc-environment/1</code>
|
|
1877
|
-
"The selected person is absent from this frame.": "이 프레임에 선택된 인물이
|
|
1878
|
-
"The selected slot's mesh at the setup pose, each vertex coloured by the weight the compiled model document stores for the picked bone (0 → 1), or by its dominant bone under <strong>Max influence</strong>. An unweighted mesh is its slot's bone at 1.0. Hover a vertex for its stored values. Nothing here edits, applies or records a weight.": "셋업 포즈에서 선택된 슬롯의 메시를 표시하며, 각 정점은 컴파일된 모델 문서에 저장된 선택 본의 웨이트(0 → 1) 또는 <strong>최대 영향</strong> 기준 지배 본 색상으로
|
|
1879
|
-
"The stage does not show the last Apply (Reset shows the inspected build); undo acts on the last Apply only": "스테이지에 마지막 적용이 표시되어 있지
|
|
1880
|
-
"The strip response format does not match the request.": "스트립 응답 형식이 요청과 일치하지
|
|
1862
|
+
"The config states no bones.": "설정에 선언된 본이 없어요.",
|
|
1863
|
+
"The config states no cut, patch or limb": "설정에 분할, 패치 또는 팔다리가 선언되어 있지 않아요",
|
|
1864
|
+
"The config states no motion.blink.": "설정에 선언된 motion.blink가 없어요.",
|
|
1865
|
+
"The config states no regions.": "설정에 선언된 영역(regions)이 없어요.",
|
|
1866
|
+
"The config states no stops (adding one is out of scope).": "설정에 스톱이 선언되어 있지 않아요(스톱 추가는 범위 외).",
|
|
1867
|
+
"The config states no turn.": "설정에 선언된 회전(turn)이 없어요.",
|
|
1868
|
+
"The current time is outside the explicit frame range. Enter a frame number to go to its exact time.": "현재 시간이 명시적 프레임 범위를 벗어났어요. 정확한 시간으로 이동하려면 프레임 번호를 입력하세요.",
|
|
1869
|
+
"The dial holds the drawn build's turn bone at x (play adjust): it shows the build on the stage, not the pending depths — Apply builds those. Nothing is recorded.": "다이얼은 그려진 빌드의 회전 본을 x에 고정해요(재생 조정): 보류 중인 깊이가 아니라 스테이지의 빌드를 보여주며 적용 시 깊이가 빌드돼요. 기록되지 않아요.",
|
|
1870
|
+
"The drawn model has no turn bone; the dial is off.": "그려진 모델에 회전 본이 없어 다이얼이 꺼져 있어요.",
|
|
1871
|
+
"The pair finished CPU draw submission after the estimated next reference display boundary. Pause for exact inspection.": "추정된 다음 레퍼런스 표시 경계 이후에 쌍의 CPU 그리기 제출이 완료됐어요. 정확한 점검을 위해 일시정지하세요.",
|
|
1872
|
+
"The pending entry is the config's entry.": "보류 중인 항목은 설정의 원본 항목이에요.",
|
|
1873
|
+
"The producer config's <code>assemble.cuts</code> polygons, <code>assemble.patches</code> boxes and each limb joint with its <code>range</code> arc, on the stage in rig px of the setup pose. Drag a vertex, a box corner or a joint, or edit the numbers: each change is a config patch op (<code>/assemble/cuts/<i>/polygon/<k></code>, <code>/assemble/patches/<i>/box</code>, <code>/limbs/<limb>/segments/<k>/range</code>; a joint is its bone's origin, <code>/bones/…</code>). A new cut or patch adds its entry and a <code>regions</code> bone. <strong>Apply</strong> runs <code>rig-parts build</code> (assemble → rig → check) from the declared painting and See-through runs into scratch and needs the reproduced baseline; the producer's refusals (<code>ASSEMBLE_CUT_*</code>, <code>ASSEMBLE_UNDER_*</code>, <code>CONFIG_LIMB_*</code>, <code>CONFIG_PART_UNIQUE</code>) are shown as printed, and the recomposite error map, the <code>seam pair</code> lines and the build's wall clock come back with the build. Review paints no <code>under</code> or <code>cap</code> image. Reset returns to the inspected build and clears the pending ops.": "프로듀서 설정의 <code>assemble.cuts</code> 다각형, <code>assemble.patches</code> 박스 및 각 사지(림) 관절과 그 <code>range</code> 호를 셋업 포즈의 리그 px 단위로 스테이지에 표시해요. 정점, 박스 모서리 또는 관절을 드래그하거나 숫자를 편집하세요. 각 변경은 설정 패치 연산(<code>/assemble/cuts/<i>/polygon/<k></code>, <code>/assemble/patches/<i>/box</code>, <code>/limbs/<limb>/segments/<k>/range</code>; 관절은 해당 본의 원점인 <code>/bones/…</code>)이에요. 새 컷이나 패치는 해당 항목과 <code>regions</code> 본을 추가해요. <strong>적용</strong>은 선언된 원화 및 See-through 실행 결과로부터 스크래치에 <code>rig-parts build</code>(assemble → rig → check)를 실행하며 재현된 베이스라인이 필요해요. 프로듀서의 거부(<code>ASSEMBLE_CUT_*</code>, <code>ASSEMBLE_UNDER_*</code>, <code>CONFIG_LIMB_*</code>, <code>CONFIG_PART_UNIQUE</code>)는 출력 그대로 표시되며, 재합성 오차 맵, <code>seam pair</code> 라인 및 빌드 소요 시간이 함께 반환돼요. 리뷰 앱은 <code>under</code>나 <code>cap</code> 이미지를 직접 칠하지 않아요. 초기화는 검사 대상 빌드로 되돌리고 대기 연산을 지워요.",
|
|
1874
|
+
"The producer config's <code>assemble.cuts</code> polygons, <code>assemble.patches</code> boxes and each limb joint with its <code>range</code> arc, on the stage in rig px of the setup pose. Drag a vertex, a box corner or a joint, or edit the numbers: each change is a config patch op (<code>/assemble/cuts/<i>/polygon/<k></code>, <code>/assemble/patches/<i>/box</code>, <code>/limbs/<limb>/segments/<k>/range</code>; a joint is its bone's origin, <code>/bones/…</code>). A new cut or patch adds its entry and a <code>regions</code> bone. <strong>Apply</strong> runs <code>rig-parts build</code> (assemble → rig → check) from the declared painting and See-through runs into scratch and needs the reproduced baseline; the producer's refusals (<code>ASSEMBLE_CUT_*</code>, <code>ASSEMBLE_UNDER_*</code>, <code>CONFIG_LIMB_*</code>, <code>CONFIG_PART_UNIQUE</code>) are shown as printed, and the recomposite error map, the <code>seam pair</code> lines and the build's wall clock come back with the build. Review paints no <code>under</code> or <code>cap</code> image. Reset returns to the inspected build and clears the pending ops.": "프로듀서 설정의 <code>assemble.cuts</code> 다각형, <code>assemble.patches</code> 박스 및 각 사지(림) 관절과 그 <code>range</code> 호를 셋업 포즈의 리그 px 단위로 스테이지에 표시해요. 정점, 박스 모서리 또는 관절을 드래그하거나 숫자를 편집하세요. 각 변경은 설정 패치 연산(<code>/assemble/cuts/<i>/polygon/<k></code>, <code>/assemble/patches/<i>/box</code>, <code>/limbs/<limb>/segments/<k>/range</code>; 관절은 해당 본의 원점인 <code>/bones/…</code>)이에요. 새 컷이나 패치는 해당 항목과 <code>regions</code> 본을 추가해요. <strong>적용</strong>은 선언된 원화 및 See-through 실행 결과로부터 스크래치에 <code>rig-parts build</code>(assemble → rig → check)를 실행하며 재현된 베이스라인이 필요해요. 프로듀서의 거부(<code>ASSEMBLE_CUT_*</code>, <code>ASSEMBLE_UNDER_*</code>, <code>CONFIG_LIMB_*</code>, <code>CONFIG_PART_UNIQUE</code>)는 출력 그대로 표시되며, 재합성 오차 맵, <code>seam pair</code> 라인 및 빌드 소요 시간이 함께 반환돼요. 리뷰 앱은 <code>under</code>나 <code>cap</code> 이미지를 직접 칠하지 않아요. 초기화는 검사 대상 빌드로 되돌리고 대기 연산을 지워요.",
|
|
1875
|
+
"The producer config's <code>cloth</code> block: one recipe per tag the installed reader accepts, with its fields as written. Each change is a config patch op at <code>/cloth/<tag>/…</code>. <strong>Show links</strong> draws the chains the tag's parts are meshed on, from the config's <code>points</code> and <code>tip</code> in rig px of the setup pose, and after an Apply the chains of the config the producer wrote. <strong>Apply</strong> runs <code>rig-parts propose --cloth --write-config</code> on the declared parts, painting and keypoints into scratch, then builds the written config (<code>rig-parts build</code> when the config declares <code>limbs</code>, else <code>rig --config</code>) and reloads it under the Environment's wind and gravity; the producer's refusals (<code>CONFIG_CLOTH_*</code>, <code>PROPOSE_CLOTH_DRAFTED</code>, <code>PROPOSE_CLOTH_PART</code>, <code>PROPOSE_WRITE_CONFIG_*</code>) are shown as printed. Review edits the recipe, never the drafted constraints. Reset returns to the inspected build and clears the pending ops.": "프로듀서 설정의 <code>cloth</code> 블록이에요: 설치된 리더가 허용하는 태그별 레시피 하나와 작성된 필드를 표시해요. 각 변경은 <code>/cloth/<tag>/…</code>의 설정 패치 연산이에요. <strong>링크 표시</strong>는 태그의 파츠가 메시된 체인을 셋업 포즈 리그 px 단위의 설정 <code>points</code> 및 <code>tip</code>으로부터 그리고, 적용 후에는 프로듀서가 작성한 설정의 체인을 그려요. <strong>적용</strong>은 선언된 파츠, 원화 및 키포인트에 대해 스크래치로 <code>rig-parts propose --cloth --write-config</code>를 실행한 뒤 작성된 설정을 빌드(설정에 <code>limbs</code>가 선언된 경우 <code>rig-parts build</code>, 아니면 <code>rig --config</code>)하고 환경 패널의 바람과 중력 아래 다시 로드해요. 프로듀서의 거부(<code>CONFIG_CLOTH_*</code>, <code>PROPOSE_CLOTH_DRAFTED</code>, <code>PROPOSE_CLOTH_PART</code>, <code>PROPOSE_WRITE_CONFIG_*</code>)는 출력 그대로 표시돼요. 리뷰 앱은 레시피만 편집하며 초안 생성된 제약을 직접 편집하지 않아요. 초기화는 검사 대상 빌드로 되돌리고 대기 연산을 지워요.",
|
|
1876
|
+
"The producer config's <code>cloth</code> block: one recipe per tag the installed reader accepts, with its fields as written. Each change is a config patch op at <code>/cloth/<tag>/…</code>. <strong>Show links</strong> draws the chains the tag's parts are meshed on, from the config's <code>points</code> and <code>tip</code> in rig px of the setup pose, and after an Apply the chains of the config the producer wrote. <strong>Apply</strong> runs <code>rig-parts propose --cloth --write-config</code> on the declared parts, painting and keypoints into scratch, then builds the written config (<code>rig-parts build</code> when the config declares <code>limbs</code>, else <code>rig --config</code>) and reloads it under the Environment's wind and gravity; the producer's refusals (<code>CONFIG_CLOTH_*</code>, <code>PROPOSE_CLOTH_DRAFTED</code>, <code>PROPOSE_CLOTH_PART</code>, <code>PROPOSE_WRITE_CONFIG_*</code>) are shown as printed. Review edits the recipe, never the drafted constraints. Reset returns to the inspected build and clears the pending ops.": "프로듀서 설정의 <code>cloth</code> 블록이에요: 설치된 리더가 허용하는 태그별 레시피 하나와 작성된 필드를 표시해요. 각 변경은 <code>/cloth/<tag>/…</code>의 설정 패치 연산이에요. <strong>링크 표시</strong>는 태그의 파츠가 메시된 체인을 셋업 포즈 리그 px 단위의 설정 <code>points</code> 및 <code>tip</code>으로부터 그리고, 적용 후에는 프로듀서가 작성한 설정의 체인을 그려요. <strong>적용</strong>은 선언된 파츠, 원화 및 키포인트에 대해 스크래치로 <code>rig-parts propose --cloth --write-config</code>를 실행한 뒤 작성된 설정을 빌드(설정에 <code>limbs</code>가 선언된 경우 <code>rig-parts build</code>, 아니면 <code>rig --config</code>)하고 환경 패널의 바람과 중력 아래 다시 로드해요. 프로듀서의 거부(<code>CONFIG_CLOTH_*</code>, <code>PROPOSE_CLOTH_DRAFTED</code>, <code>PROPOSE_CLOTH_PART</code>, <code>PROPOSE_WRITE_CONFIG_*</code>)는 출력 그대로 표시돼요. 리뷰 앱은 레시피만 편집하며 초안 생성된 제약을 직접 편집하지 않아요. 초기화는 검사 대상 빌드로 되돌리고 대기 연산을 지워요.",
|
|
1877
|
+
"The producer config's bones at their <code>at</code>, chain <code>points</code> and <code>tip</code> (rig px, the setup pose; the stage may be posed by an animation). Drag a handle on the stage or edit the numbers: each move is a config patch op at <code>/bones/<i>/at</code>, <code>/bones/<i>/points/<k></code> or <code>/bones/<i>/tip</code> naming its bone, moved in whole rig px. <strong>Check</strong> runs <code>propose --from-config</code> on a scratch copy of the patched config (LINT and coverage lines; LINT blocks nothing) and <code>compare</code> against the handoff config. <strong>Apply</strong> rebuilds the whole rig (<code>rig --config</code>, then <code>check</code>) and needs the reproduced baseline; Reset returns to the inspected build and clears the pending ops. Adding, removing or re-parenting bones is out of scope.": "프로듀서 설정의 본을 <code>at</code>, 체인 <code>points</code> 및 <code>tip</code> 위치(리그 px, 셋업 포즈 기준; 스테이지는 애니메이션 포즈일 수 있음)에 표시해요. 스테이지에서 핸들을 드래그하거나 숫자를 편집하세요. 각 이동은 해당 본을 지정하는 <code>/bones/<i>/at</code>, <code>/bones/<i>/points/<k></code> 또는 <code>/bones/<i>/tip</code>의 정수 리그 px 단위 설정 패치 연산이에요. <strong>점검</strong>은 패치된 설정의 스크래치 복사본에 대해 <code>propose --from-config</code>(LINT 및 커버리지 라인; LINT는 차단하지 않음)와 핸드오프 설정 대비 <code>compare</code>를 실행해요. <strong>적용</strong>은 전체 리그를 리빌드(<code>rig --config</code> 후 <code>check</code>)하며 재현된 베이스라인이 필요해요. 초기화는 검사 대상 빌드로 되돌리고 대기 연산을 지워요. 본 추가·삭제·부모 변경은 범위 밖이에요.",
|
|
1878
|
+
"The producer config's bones at their <code>at</code>, chain <code>points</code> and <code>tip</code> (rig px, the setup pose; the stage may be posed by an animation). Drag a handle on the stage or edit the numbers: each move is a config patch op at <code>/bones/<i>/at</code>, <code>/bones/<i>/points/<k></code> or <code>/bones/<i>/tip</code> naming its bone, moved in whole rig px. <strong>Check</strong> runs <code>propose --from-config</code> on a scratch copy of the patched config (LINT and coverage lines; LINT blocks nothing) and <code>compare</code> against the handoff config. <strong>Apply</strong> rebuilds the whole rig (<code>rig --config</code>, then <code>check</code>) and needs the reproduced baseline; Reset returns to the inspected build and clears the pending ops. Adding, removing or re-parenting bones is out of scope.": "프로듀서 설정의 본을 <code>at</code>, 체인 <code>points</code> 및 <code>tip</code> 위치(리그 px, 셋업 포즈 기준; 스테이지는 애니메이션 포즈일 수 있음)에 표시해요. 스테이지에서 핸들을 드래그하거나 숫자를 편집하세요. 각 이동은 해당 본을 지정하는 <code>/bones/<i>/at</code>, <code>/bones/<i>/points/<k></code> 또는 <code>/bones/<i>/tip</code>의 정수 리그 px 단위 설정 패치 연산이에요. <strong>점검</strong>은 패치된 설정의 스크래치 복사본에 대해 <code>propose --from-config</code>(LINT 및 커버리지 라인; LINT는 차단하지 않음)와 핸드오프 설정 대비 <code>compare</code>를 실행해요. <strong>적용</strong>은 전체 리그를 리빌드(<code>rig --config</code> 후 <code>check</code>)하며 재현된 베이스라인이 필요해요. 초기화는 검사 대상 빌드로 되돌리고 대기 연산을 지워요. 본 추가·삭제·부모 변경은 범위 밖이에요.",
|
|
1879
|
+
"The report target is absent from the current rig catalog; choose a target manually.": "리포트 대상이 현재 리그 카탈로그에 없어요. 대상을 직접 선택하세요.",
|
|
1880
|
+
"The same frame number in A and B is not assumed to mean the same time. Batch export uses each feedback side as its frame basis. Without frameTimes, PNG is refused and JSON preserves time: null.": "A와 B의 동일한 프레임 번호가 같은 시간을 의미한다고 가정하지 않아요. 일괄 내보내기는 각 피드백의 사이드를 프레임 기준으로 사용해요. frameTimes가 없으면 PNG는 거부되고 JSON은 time: null을 보존해요.",
|
|
1881
|
+
"The schedule is the controls as a <code>rigc-environment/1</code> file from the clip's first frame: one step when the wind is steady, else one step per frame at 12 fps (between frames rigc holds the frame's value). A one-off Gust is not in it; Repeat puts gusts in it. Check under this world runs <code>rig-parts check --environment</code> on the build on the stage; the default-world line is that build's own check.": "스케줄은 클립의 첫 프레임부터 컨트롤 값을 담은 <code>rigc-environment/1</code> 파일이에요: 바람이 일정하면 단일 스텝, 아니면 12 fps 기준 프레임당 한 스텝이에요(프레임 사이에서 rigc는 프레임 값을 유지함). 일회성 돌풍(Gust)은 포함되지 않으며, 반복(Repeat)을 켜면 돌풍이 포함돼요. 이 월드 기준 점검은 스테이지의 빌드에 대해 <code>rig-parts check --environment</code>를 실행하며, 기본 월드 라인은 해당 빌드의 자체 점검 결과예요.",
|
|
1882
|
+
"The selected person is absent from this frame.": "이 프레임에 선택된 인물이 없어요.",
|
|
1883
|
+
"The selected slot's mesh at the setup pose, each vertex coloured by the weight the compiled model document stores for the picked bone (0 → 1), or by its dominant bone under <strong>Max influence</strong>. An unweighted mesh is its slot's bone at 1.0. Hover a vertex for its stored values. Nothing here edits, applies or records a weight.": "셋업 포즈에서 선택된 슬롯의 메시를 표시하며, 각 정점은 컴파일된 모델 문서에 저장된 선택 본의 웨이트(0 → 1) 또는 <strong>최대 영향</strong> 기준 지배 본 색상으로 칠해져요. 웨이트가 없는 메시는 해당 슬롯 본이 1.0이에요. 정점 위에 마우스를 올리면 저장된 값을 볼 수 있어요. 이 패널에서는 웨이트를 편집·적용·기록하지 않아요.",
|
|
1884
|
+
"The stage does not show the last Apply (Reset shows the inspected build); undo acts on the last Apply only": "스테이지에 마지막 적용이 표시되어 있지 않아요(초기화는 점검 중인 빌드를 표시함). 실행 취소는 마지막 적용에만 작동해요",
|
|
1885
|
+
"The strip response format does not match the request.": "스트립 응답 형식이 요청과 일치하지 않아요.",
|
|
1881
1886
|
"Theme": "테마",
|
|
1882
|
-
"These controls show actual images, last-drawn mesh edges and named bone points for Build {0} ({1}). Setup tools apply changes only to Build {2} in a scratch build; on-disk packages stay immutable.": "이 컨트롤은 빌드 {0} ({1})의 실제 이미지, 마지막으로 그려진 메시 엣지 및 이름 지정된 본 포인트를
|
|
1883
|
-
"These controls show actual images, last-drawn mesh edges and named bone points. Both builds use the fixed animation named above. This inspector does not author geometry or motion.": "이 컨트롤은 실제 이미지, 마지막으로 그려진 메시 엣지 및 이름 지정된 본 포인트를
|
|
1884
|
-
"This rebuild starts from the handoff and drops: {0}": "이 리빌드는 핸드오프에서 시작하며 다음 항목을
|
|
1885
|
-
"Three clicks (right apex, left apex, cleavage); the producer derives both circles (contour.bust)": "세 번의 클릭(오른쪽 정점, 왼쪽 정점, 클리비지)으로 프로듀서가 두 원(contour.bust)을
|
|
1887
|
+
"These controls show actual images, last-drawn mesh edges and named bone points for Build {0} ({1}). Setup tools apply changes only to Build {2} in a scratch build; on-disk packages stay immutable.": "이 컨트롤은 빌드 {0} ({1})의 실제 이미지, 마지막으로 그려진 메시 엣지 및 이름 지정된 본 포인트를 표시해요. 셋업 도구는 임시 빌드에서 빌드 {2}에만 변경을 적용하며 디스크의 패키지는 변경되지 않아요.",
|
|
1888
|
+
"These controls show actual images, last-drawn mesh edges and named bone points. Both builds use the fixed animation named above. This inspector does not author geometry or motion.": "이 컨트롤은 실제 이미지, 마지막으로 그려진 메시 엣지 및 이름 지정된 본 포인트를 표시해요. 두 빌드 모두 위에 표시된 고정 애니메이션을 사용해요. 이 인스펙터는 지오메트리나 모션을 직접 제작하지 않아요.",
|
|
1889
|
+
"This rebuild starts from the handoff and drops: {0}": "이 리빌드는 핸드오프에서 시작하며 다음 항목을 제외해요: {0}",
|
|
1890
|
+
"Three clicks (right apex, left apex, cleavage); the producer derives both circles (contour.bust)": "세 번의 클릭(오른쪽 정점, 왼쪽 정점, 클리비지)으로 프로듀서가 두 원(contour.bust)을 도출해요",
|
|
1886
1891
|
"Time (s)": "시간 (초)",
|
|
1887
|
-
"Timed out waiting for reference video seek / decoded-frame response.": "레퍼런스 비디오 탐색 / 디코딩된 프레임 응답 대기 시간이
|
|
1892
|
+
"Timed out waiting for reference video seek / decoded-frame response.": "레퍼런스 비디오 탐색 / 디코딩된 프레임 응답 대기 시간이 초과됐어요.",
|
|
1888
1893
|
"Timeline": "타임라인",
|
|
1889
1894
|
"Timeline horizontal zoom": "타임라인 가로 줌",
|
|
1890
1895
|
"Timeline horizontal zoom {0}×": "타임라인 가로 확대/축소 {0}×",
|
|
@@ -1892,7 +1897,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1892
1897
|
"Tolerance": "허용 오차",
|
|
1893
1898
|
"Track": "트랙",
|
|
1894
1899
|
"Track ": "트랙 ",
|
|
1895
|
-
"Track has fewer than 2 keys (no curve segments).": "트랙의 키가 2개
|
|
1900
|
+
"Track has fewer than 2 keys (no curve segments).": "트랙의 키가 2개 미만이에요(곡선 세그먼트 없음).",
|
|
1896
1901
|
"Transport": "트랜스포트(재생 제어)",
|
|
1897
1902
|
"Turn pad": "회전 패드",
|
|
1898
1903
|
"Turn smoothing": "회전 스무딩",
|
|
@@ -1900,7 +1905,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1900
1905
|
"Turn {0} value": "회전 {0} 값",
|
|
1901
1906
|
"Two circles, each centre, core and band set by hand (#99)": "두 개의 원, 각각의 중심·코어·밴드를 수동 설정 (#99)",
|
|
1902
1907
|
"UNDO_FAILED: {0}": "UNDO_FAILED: {0}",
|
|
1903
|
-
"Undid last pending op ({0} pending op(s) remaining).": "마지막 보류 작업을
|
|
1908
|
+
"Undid last pending op ({0} pending op(s) remaining).": "마지막 보류 작업을 취소했어요 (남은 보류 작업 {0}개).",
|
|
1904
1909
|
"Undid {0}… on Build {1} · {2} applied record(s) left": "빌드 {1}에서 {0}… 실행 취소됨 · 남은 적용 레코드 {2}개",
|
|
1905
1910
|
"Undid {0}… · the stage is {1} · {2} applied record(s) left": "{0}… 실행 취소됨 · 스테이지: {1} · 남은 적용 레코드 {2}개",
|
|
1906
1911
|
"Undo": "실행 취소",
|
|
@@ -1913,65 +1918,65 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1913
1918
|
"Unknown": "알 수 없음",
|
|
1914
1919
|
"Unsubmitted changes": "제출되지 않은 변경사항",
|
|
1915
1920
|
"Unsupported package asset path: {0}": "지원되지 않는 패키지 에셋 경로: {0}",
|
|
1916
|
-
"Unusable local draft discarded for this review only.": "사용할 수 없는 로컬 초안이 이 리뷰에 한해
|
|
1921
|
+
"Unusable local draft discarded for this review only.": "사용할 수 없는 로컬 초안이 이 리뷰에 한해 폐기됐어요.",
|
|
1917
1922
|
"Use for readings": "판독에 사용",
|
|
1918
|
-
"Use for readings is off: readings send the standing wind and gravity, Apply's check reads the default world.": "측정에 사용이 꺼져
|
|
1919
|
-
"Use for readings: {0} · the wind clock restarts with the clip.": "측정에 사용: {0} · 바람 클록이 클립과 함께
|
|
1923
|
+
"Use for readings is off: readings send the standing wind and gravity, Apply's check reads the default world.": "측정에 사용이 꺼져 있어요: 측정은 기본 바람과 중력을 보내며 적용 검사는 기본 월드를 읽어요.",
|
|
1924
|
+
"Use for readings: {0} · the wind clock restarts with the clip.": "측정에 사용: {0} · 바람 클록이 클립과 함께 재시작돼요.",
|
|
1920
1925
|
"Use slot for feedback": "슬롯을 피드백 대상으로 사용",
|
|
1921
1926
|
"Use this JSON": "이 JSON 사용",
|
|
1922
|
-
"Uses the feedback form start and end frames, inclusive. Exports Reference / A / B rows without changing inspection time.": "피드백 폼의 시작 및 끝 프레임(양끝 포함)을
|
|
1923
|
-
"Uses the feedback form start and end frames, inclusive. Inspection time and source files remain unchanged.": "피드백 폼의 시작 및 끝 프레임(양끝 포함)을
|
|
1924
|
-
"VIEW_CAMERA_RANGE: derived camera exceeds numeric source-coordinate limits": "VIEW_CAMERA_RANGE: 계산된 카메라가 수치 소스 좌표 한도를
|
|
1925
|
-
"VIEW_CAMERA_RANGE: saved region cannot fit within zoom 0.25..8": "VIEW_CAMERA_RANGE: 저장된 영역을 0.25..8 배율 범위 내에 맞출 수
|
|
1926
|
-
"VIEW_SOURCE_CHANGED: view belongs to different reviewed inputs": "VIEW_SOURCE_CHANGED: 뷰가 다른 리뷰 입력에
|
|
1927
|
+
"Uses the feedback form start and end frames, inclusive. Exports Reference / A / B rows without changing inspection time.": "피드백 폼의 시작 및 끝 프레임(양끝 포함)을 사용해요. 검사 시간을 변경하지 않고 레퍼런스 / A / B 행을 내보내요.",
|
|
1928
|
+
"Uses the feedback form start and end frames, inclusive. Inspection time and source files remain unchanged.": "피드백 폼의 시작 및 끝 프레임(양끝 포함)을 사용해요. 검사 시간과 소스 파일은 변경되지 않아요.",
|
|
1929
|
+
"VIEW_CAMERA_RANGE: derived camera exceeds numeric source-coordinate limits": "VIEW_CAMERA_RANGE: 계산된 카메라가 수치 소스 좌표 한도를 초과해요",
|
|
1930
|
+
"VIEW_CAMERA_RANGE: saved region cannot fit within zoom 0.25..8": "VIEW_CAMERA_RANGE: 저장된 영역을 0.25..8 배율 범위 내에 맞출 수 없어요",
|
|
1931
|
+
"VIEW_SOURCE_CHANGED: view belongs to different reviewed inputs": "VIEW_SOURCE_CHANGED: 뷰가 다른 리뷰 입력에 속해요",
|
|
1927
1932
|
"Validation warning · {0}": "유효성 경고 · {0}",
|
|
1928
1933
|
"Validation warnings (must be corrected before submission):": "유효성 경고 (제출 전 수정 필요):",
|
|
1929
1934
|
"Validation warnings:": "유효성 경고:",
|
|
1930
1935
|
"Vertex and triangle counts before and after": "적용 전후 정점 및 삼각형 수",
|
|
1931
1936
|
"Video audio": "비디오 오디오",
|
|
1932
1937
|
"View": "뷰",
|
|
1933
|
-
"View active camera is unavailable in this review mode": "이 리뷰 모드에서는 뷰 활성 카메라를 사용할 수
|
|
1934
|
-
"View animation must be named or null": "뷰 애니메이션은 이름이 지정되거나 null이어야
|
|
1935
|
-
"View appearance invalid": "뷰 외관이 유효하지
|
|
1936
|
-
"View axis value invalid": "뷰 축 값이 유효하지
|
|
1937
|
-
"View build side invalid": "뷰 빌드 사이드가 유효하지
|
|
1938
|
-
"View fitted.": "뷰를
|
|
1938
|
+
"View active camera is unavailable in this review mode": "이 리뷰 모드에서는 뷰 활성 카메라를 사용할 수 없어요",
|
|
1939
|
+
"View animation must be named or null": "뷰 애니메이션은 이름이 지정되거나 null이어야 해요",
|
|
1940
|
+
"View appearance invalid": "뷰 외관이 유효하지 않아요",
|
|
1941
|
+
"View axis value invalid": "뷰 축 값이 유효하지 않아요",
|
|
1942
|
+
"View build side invalid": "뷰 빌드 사이드가 유효하지 않아요",
|
|
1943
|
+
"View fitted.": "뷰를 맞췄어요.",
|
|
1939
1944
|
"View fitted{0}.": "뷰 맞춤 완료{0}.",
|
|
1940
1945
|
"View landing binding invalid: ": "뷰 랜딩 바인딩이 유효하지 않음: ",
|
|
1941
1946
|
"View landing binding invalid: {0}": "뷰 랜딩 바인딩이 유효하지 않음: {0}",
|
|
1942
|
-
"View layers must be boolean": "뷰 레이어는 불리언이어야
|
|
1947
|
+
"View layers must be boolean": "뷰 레이어는 불리언이어야 해요",
|
|
1943
1948
|
"View layout": "뷰 레이아웃",
|
|
1944
|
-
"View link copied · source-bound numeric region, no review decisions.": "뷰 링크 복사됨 · 소스에 바인딩된 수치 영역이며 리뷰 판정은 포함되지
|
|
1945
|
-
"View link encoding invalid": "뷰 링크 인코딩이 유효하지
|
|
1946
|
-
"View link exceeds 16 KiB": "뷰 링크가 16 KiB를
|
|
1949
|
+
"View link copied · source-bound numeric region, no review decisions.": "뷰 링크 복사됨 · 소스에 바인딩된 수치 영역이며 리뷰 판정은 포함되지 않아요.",
|
|
1950
|
+
"View link encoding invalid": "뷰 링크 인코딩이 유효하지 않아요",
|
|
1951
|
+
"View link exceeds 16 KiB": "뷰 링크가 16 KiB를 초과해요",
|
|
1947
1952
|
"View link refused: {0}": "뷰 링크 거부됨: {0}",
|
|
1948
|
-
"View link restored · paused inspection; local draft not submitted.": "뷰 링크 복원됨 · 일시정지된 점검; 로컬 초안은 제출되지
|
|
1949
|
-
"View link restored · paused inspection; submitted review unchanged.": "뷰 링크 복원됨 · 일시정지된 점검; 제출된 리뷰는 변경되지
|
|
1953
|
+
"View link restored · paused inspection; local draft not submitted.": "뷰 링크 복원됨 · 일시정지된 점검; 로컬 초안은 제출되지 않았어요.",
|
|
1954
|
+
"View link restored · paused inspection; submitted review unchanged.": "뷰 링크 복원됨 · 일시정지된 점검; 제출된 리뷰는 변경되지 않았어요.",
|
|
1950
1955
|
"View link version unsupported": "지원되지 않는 뷰 링크 버전",
|
|
1951
1956
|
"View link was not copied: {0}": "뷰 링크가 복사되지 않음: {0}",
|
|
1952
1957
|
"View link was not restored: {0}": "뷰 링크가 복원되지 않음: {0}",
|
|
1953
1958
|
"View mode unavailable": "뷰 모드를 사용할 수 없음",
|
|
1954
|
-
"View part side unavailable in this review mode": "이 리뷰 모드에서는 뷰 파츠 사이드를 사용할 수
|
|
1959
|
+
"View part side unavailable in this review mode": "이 리뷰 모드에서는 뷰 파츠 사이드를 사용할 수 없어요",
|
|
1955
1960
|
"View region": "뷰 영역",
|
|
1956
|
-
"View rig binding invalid": "뷰 리그 바인딩이 유효하지
|
|
1957
|
-
"View selection invalid": "뷰 선택이 유효하지
|
|
1958
|
-
"View source hash: expected SHA-256": "뷰 소스 해시: SHA-256이
|
|
1959
|
-
"View time requires finite nonnegative seconds": "뷰 시간에는 유한한 0 이상의 초가
|
|
1960
|
-
"View workspace invalid": "뷰 워크스페이스가 유효하지
|
|
1961
|
-
"View workspace mode invalid": "뷰 워크스페이스 모드가 유효하지
|
|
1961
|
+
"View rig binding invalid": "뷰 리그 바인딩이 유효하지 않아요",
|
|
1962
|
+
"View selection invalid": "뷰 선택이 유효하지 않아요",
|
|
1963
|
+
"View source hash: expected SHA-256": "뷰 소스 해시: SHA-256이 필요해요",
|
|
1964
|
+
"View time requires finite nonnegative seconds": "뷰 시간에는 유한한 0 이상의 초가 필요해요",
|
|
1965
|
+
"View workspace invalid": "뷰 워크스페이스가 유효하지 않아요",
|
|
1966
|
+
"View workspace mode invalid": "뷰 워크스페이스 모드가 유효하지 않아요",
|
|
1962
1967
|
"View:": "뷰:",
|
|
1963
1968
|
"WEIGHTS · SETUP POSE · WATCH ONLY": "웨이트 · 셋업 포즈 · 보기 전용",
|
|
1964
|
-
"WEIGHTS_RAMP_UNAVAILABLE: no bone colour tokens": "WEIGHTS_RAMP_UNAVAILABLE: 본 색상 토큰이
|
|
1965
|
-
"WEIGHTS_RAMP_UNAVAILABLE: the weight ramp tokens are not hex colours": "WEIGHTS_RAMP_UNAVAILABLE: 가중치 램프 토큰이 16진수 색상이
|
|
1969
|
+
"WEIGHTS_RAMP_UNAVAILABLE: no bone colour tokens": "WEIGHTS_RAMP_UNAVAILABLE: 본 색상 토큰이 없어요",
|
|
1970
|
+
"WEIGHTS_RAMP_UNAVAILABLE: the weight ramp tokens are not hex colours": "WEIGHTS_RAMP_UNAVAILABLE: 가중치 램프 토큰이 16진수 색상이 아니에요",
|
|
1966
1971
|
"WEIGHTS_SELECT_BONE: pick a bone": "WEIGHTS_SELECT_BONE: 본을 선택하세요",
|
|
1967
|
-
"WORKSPACE_COLUMNS: left {0} / right {1}; required distinct leftWidth, rightWidth or null": "WORKSPACE_COLUMNS: 좌측 {0} / 우측 {1}; 고유한 leftWidth, rightWidth 또는 null이
|
|
1968
|
-
"WORKSPACE_DRAWER: named dialog and trigger required": "WORKSPACE_DRAWER: 이름이 지정된 대화상자와 트리거가
|
|
1969
|
-
"WORKSPACE_RECTANGLE: finite 0..65536 CSS pixels required": "WORKSPACE_RECTANGLE: 유한한 0..65536 CSS 픽셀이
|
|
1970
|
-
"WORKSPACE_SEPARATOR: controls and accessible label required": "WORKSPACE_SEPARATOR: 컨트롤과 접근성 라벨이
|
|
1971
|
-
"WORKSPACE_SEPARATOR: finite desired start required": "WORKSPACE_SEPARATOR: 유한한 시작 크기가
|
|
1972
|
-
"WORKSPACE_SEPARATOR: finite resolved desired size required": "WORKSPACE_SEPARATOR: 유한한 결정 크기가
|
|
1973
|
-
"WORKSPACE_SEPARATOR: positive finite keyboard steps required": "WORKSPACE_SEPARATOR: 양의 유한 키보드 단계가
|
|
1974
|
-
"WORKSPACE_SEPARATOR_RANGE: finite ordered range required": "WORKSPACE_SEPARATOR_RANGE: 유한하고 순서가 지정된 범위가
|
|
1972
|
+
"WORKSPACE_COLUMNS: left {0} / right {1}; required distinct leftWidth, rightWidth or null": "WORKSPACE_COLUMNS: 좌측 {0} / 우측 {1}; 고유한 leftWidth, rightWidth 또는 null이 필요해요",
|
|
1973
|
+
"WORKSPACE_DRAWER: named dialog and trigger required": "WORKSPACE_DRAWER: 이름이 지정된 대화상자와 트리거가 필요해요",
|
|
1974
|
+
"WORKSPACE_RECTANGLE: finite 0..65536 CSS pixels required": "WORKSPACE_RECTANGLE: 유한한 0..65536 CSS 픽셀이 필요해요",
|
|
1975
|
+
"WORKSPACE_SEPARATOR: controls and accessible label required": "WORKSPACE_SEPARATOR: 컨트롤과 접근성 라벨이 필요해요",
|
|
1976
|
+
"WORKSPACE_SEPARATOR: finite desired start required": "WORKSPACE_SEPARATOR: 유한한 시작 크기가 필요해요",
|
|
1977
|
+
"WORKSPACE_SEPARATOR: finite resolved desired size required": "WORKSPACE_SEPARATOR: 유한한 결정 크기가 필요해요",
|
|
1978
|
+
"WORKSPACE_SEPARATOR: positive finite keyboard steps required": "WORKSPACE_SEPARATOR: 양의 유한 키보드 단계가 필요해요",
|
|
1979
|
+
"WORKSPACE_SEPARATOR_RANGE: finite ordered range required": "WORKSPACE_SEPARATOR_RANGE: 유한하고 순서가 지정된 범위가 필요해요",
|
|
1975
1980
|
"WRITTEN DIFF": "기록된 변경사항(DIFF)",
|
|
1976
1981
|
"Wait for the reference video and both rigs to synchronize successfully before adding feedback.": "피드백을 추가하기 전에 레퍼런스 비디오와 두 리그가 성공적으로 동기화될 때까지 기다리세요.",
|
|
1977
1982
|
"Waiting for video time": "비디오 시간 대기 중",
|
|
@@ -1983,7 +1988,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1983
1988
|
"Where the new part is drawn": "새 파츠가 그려질 위치",
|
|
1984
1989
|
"Whole rig": "전체 리그",
|
|
1985
1990
|
"Wind": "바람",
|
|
1986
|
-
"Wind, gravity and impulses go to the player while you inspect. Nothing is written to the model or motion; feedback records the state as context.": "검사하는 동안 바람, 중력 및 충격이 플레이어에
|
|
1991
|
+
"Wind, gravity and impulses go to the player while you inspect. Nothing is written to the model or motion; feedback records the state as context.": "검사하는 동안 바람, 중력 및 충격이 플레이어에 전달돼요. 모델이나 모션에는 아무것도 기록되지 않으며, 피드백이 해당 상태를 컨텍스트로 기록해요.",
|
|
1987
1992
|
"Workspace panels": "워크스페이스 패널",
|
|
1988
1993
|
"Worst frame per reading": "판독별 최악 프레임",
|
|
1989
1994
|
"Write review": "리뷰 작성",
|
|
@@ -1993,53 +1998,53 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
1993
1998
|
"Zoom in": "확대",
|
|
1994
1999
|
"Zoom out": "축소",
|
|
1995
2000
|
"[first,last] times in seconds": "초 단위의 [시작,끝] 시간",
|
|
1996
|
-
"[x, y] is required": "[x, y]가
|
|
2001
|
+
"[x, y] is required": "[x, y]가 필요해요",
|
|
1997
2002
|
"[{0}][{1}] {2}:{3} F{4}–{5} · {6}": "[{0}][{1}] {2}:{3} F{4}–{5} · {6}",
|
|
1998
|
-
"a bones check is still running": "본 검사가 아직 실행
|
|
1999
|
-
"a breeze or a repeating gust is sampled over a clip; no clip with a duration is drawn": "산들바람 또는 반복 돌풍은 클립에 걸쳐 샘플링되지만 현재 길이가 있는 클립이 그려져 있지
|
|
2000
|
-
"a chain name, a bone name, or [bone, [x, y], [x, y]] is required": "체인 이름, 본 이름 또는 [본, [x, y], [x, y]]가
|
|
2001
|
-
"a compiled skeleton is required": "컴파일된 스켈레톤이
|
|
2003
|
+
"a bones check is still running": "본 검사가 아직 실행 중이에요",
|
|
2004
|
+
"a breeze or a repeating gust is sampled over a clip; no clip with a duration is drawn": "산들바람 또는 반복 돌풍은 클립에 걸쳐 샘플링되지만 현재 길이가 있는 클립이 그려져 있지 않아요",
|
|
2005
|
+
"a chain name, a bone name, or [bone, [x, y], [x, y]] is required": "체인 이름, 본 이름 또는 [본, [x, y], [x, y]]가 필요해요",
|
|
2006
|
+
"a compiled skeleton is required": "컴파일된 스켈레톤이 필요해요",
|
|
2002
2007
|
"a divisor not offered": "제공되지 않는 약수",
|
|
2003
2008
|
"a fraction in (0, 1)": "(0, 1) 범위의 비율",
|
|
2004
|
-
"a list is required": "목록이
|
|
2005
|
-
"a mesh edit (Edit Mesh) is held to the inspected mesh itself, not to the config, so the baseline does not refuse it": "메시 편집(Edit Mesh)은 설정이 아닌 점검 중인 메시 자체에 바인딩되므로 기준선이 이를 거부하지
|
|
2006
|
-
"a mesh patch is one op, replace {0}; this one has {1}: {2}": "메시 패치는 단일 작업(replace {0})이어야 하지만 현재 {1}개가
|
|
2007
|
-
"a mesh patch runs remesh --part {0}": "메시 패치는 remesh --part {0}을(를)
|
|
2008
|
-
"a non-empty list is required": "비어 있지 않은 목록이
|
|
2009
|
+
"a list is required": "목록이 필요해요",
|
|
2010
|
+
"a mesh edit (Edit Mesh) is held to the inspected mesh itself, not to the config, so the baseline does not refuse it": "메시 편집(Edit Mesh)은 설정이 아닌 점검 중인 메시 자체에 바인딩되므로 기준선이 이를 거부하지 않아요",
|
|
2011
|
+
"a mesh patch is one op, replace {0}; this one has {1}: {2}": "메시 패치는 단일 작업(replace {0})이어야 하지만 현재 {1}개가 있어요: {2}",
|
|
2012
|
+
"a mesh patch runs remesh --part {0}": "메시 패치는 remesh --part {0}을(를) 실행해요",
|
|
2013
|
+
"a non-empty list is required": "비어 있지 않은 목록이 필요해요",
|
|
2009
2014
|
"a number above 0 that replaces the 2 in w = 1/(d + r)^exponent (absent is 2)": "w = 1/(d + r)^exponent에서 2를 대체하는 0보다 큰 숫자 (생략 시 2)",
|
|
2010
|
-
"a region is replaced with a bone name": "영역은 본 이름으로
|
|
2011
|
-
"a seam needs two slots": "심(seam)에는 두 개의 슬롯이
|
|
2012
|
-
"a still entry is {row, bone}": "고정(still) 항목은 {row, bone} 형식이어야
|
|
2013
|
-
"a stop is replaced whole and names its chain": "스톱은 전체로 교체되며 대상 체인을 지정해야
|
|
2014
|
-
"a string is required": "문자열이
|
|
2015
|
-
"a strip is made of remesh patches (remesh --part <part>)": "스트립은 리메시 패치(remesh --part <part>)로
|
|
2016
|
-
"a turn value is replaced with a number": "회전 값은 숫자로
|
|
2017
|
-
"a whole number, 0 or more, is required": "0 이상의 정수가
|
|
2015
|
+
"a region is replaced with a bone name": "영역은 본 이름으로 교체돼요",
|
|
2016
|
+
"a seam needs two slots": "심(seam)에는 두 개의 슬롯이 필요해요",
|
|
2017
|
+
"a still entry is {row, bone}": "고정(still) 항목은 {row, bone} 형식이어야 해요",
|
|
2018
|
+
"a stop is replaced whole and names its chain": "스톱은 전체로 교체되며 대상 체인을 지정해야 해요",
|
|
2019
|
+
"a string is required": "문자열이 필요해요",
|
|
2020
|
+
"a strip is made of remesh patches (remesh --part <part>)": "스트립은 리메시 패치(remesh --part <part>)로 구성돼요",
|
|
2021
|
+
"a turn value is replaced with a number": "회전 값은 숫자로 교체돼요",
|
|
2022
|
+
"a whole number, 0 or more, is required": "0 이상의 정수가 필요해요",
|
|
2018
2023
|
"add /assemble/{0}/-": "add /assemble/{0}/- 추가",
|
|
2019
2024
|
"added to every distance before weighting: w = 1/(d + r)²": "가중치 계산 전 모든 거리에 더해지는 값: w = 1/(d + r)²",
|
|
2020
2025
|
"alternate damping": "교차 감쇠(alternate damping)",
|
|
2021
|
-
"an animation is required": "애니메이션이
|
|
2022
|
-
"an object is required": "객체가
|
|
2023
|
-
"an object of chain name -> { stations } naming one or more chains is required": "하나 이상의 체인을 지정하는 체인 이름 -> { stations } 객체가
|
|
2026
|
+
"an animation is required": "애니메이션이 필요해요",
|
|
2027
|
+
"an object is required": "객체가 필요해요",
|
|
2028
|
+
"an object of chain name -> { stations } naming one or more chains is required": "하나 이상의 체인을 지정하는 체인 이름 -> { stations } 객체가 필요해요",
|
|
2024
2029
|
"angle range": "각도 범위",
|
|
2025
2030
|
"angle-range {0}:{1}": "각도 범위 {0}:{1}",
|
|
2026
2031
|
"animation \"{0}\" track {1} (\"{2}.{3}\")": "애니메이션 \"{0}\" 트랙 {1} (\"{2}.{3}\")",
|
|
2027
|
-
"animation is read-only": "애니메이션이 읽기
|
|
2032
|
+
"animation is read-only": "애니메이션이 읽기 전용이에요",
|
|
2028
2033
|
"animation not in the drawn build": "그려진 빌드에 없는 애니메이션",
|
|
2029
2034
|
"animation {0}… ({1} op(s) on {2}; {3} {4}… → {5}…) with {6} {7} · {8}{9}{10} · model {11}…": "{6} {7}로 애니메이션 {0}… ({2}에 작업 {1}개; {3} {4}… → {5}…) · {8}{9}{10} · 모델 {11}…",
|
|
2030
2035
|
"animation: {0} ({1})": "애니메이션: {0} ({1})",
|
|
2031
2036
|
"another declared joint id": "선언된 다른 관절 ID",
|
|
2032
2037
|
"applied already": "이미 적용됨",
|
|
2033
|
-
"args must be an array of at most 16 strings": "args는 최대 16개의 문자열 배열이어야
|
|
2034
|
-
"args: {0} given twice": "args: {0}이(가) 두 번
|
|
2035
|
-
"args: {0} has no value": "args: {0}에 값이
|
|
2036
|
-
"args: {0} is not a flag an animation Apply may pass to rig (allowed: {1})": "args: {0}은(는) 애니메이션 적용이 rig에 전달할 수 있는 플래그가
|
|
2038
|
+
"args must be an array of at most 16 strings": "args는 최대 16개의 문자열 배열이어야 해요",
|
|
2039
|
+
"args: {0} given twice": "args: {0}이(가) 두 번 지정됐어요",
|
|
2040
|
+
"args: {0} has no value": "args: {0}에 값이 없어요",
|
|
2041
|
+
"args: {0} is not a flag an animation Apply may pass to rig (allowed: {1})": "args: {0}은(는) 애니메이션 적용이 rig에 전달할 수 있는 플래그가 아니에요 (허용: {1})",
|
|
2037
2042
|
"args: {0} {1} (allowed: {2})": "args: {0} {1} (허용: {2})",
|
|
2038
2043
|
"array of at most 10000 entries": "최대 10000개 항목의 배열",
|
|
2039
2044
|
"array of names": "이름 배열",
|
|
2040
2045
|
"array of times in seconds": "초 단위 시간 배열",
|
|
2041
|
-
"assemble.cuts[{0}] is not {from, into, polygon, draw, overlap}": "assemble.cuts[{0}]이(가) {from, into, polygon, draw, overlap} 형식이
|
|
2042
|
-
"assemble.patches[{0}] is not {name, box, alpha, draw}": "assemble.patches[{0}]이(가) {name, box, alpha, draw} 형식이
|
|
2046
|
+
"assemble.cuts[{0}] is not {from, into, polygon, draw, overlap}": "assemble.cuts[{0}]이(가) {from, into, polygon, draw, overlap} 형식이 아니에요",
|
|
2047
|
+
"assemble.patches[{0}] is not {name, box, alpha, draw}": "assemble.patches[{0}]이(가) {name, box, alpha, draw} 형식이 아니에요",
|
|
2043
2048
|
"attachment name": "어태치먼트 이름",
|
|
2044
2049
|
"awaiting draw": "그리기 대기 중",
|
|
2045
2050
|
"awaiting identity snapshot": "식별 스냅샷 대기 중",
|
|
@@ -2056,35 +2061,35 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2056
2061
|
"bend tolerance": "굽힘 허용 오차",
|
|
2057
2062
|
"bend tolerance degrees": "굽힘 허용 오차 각도(°)",
|
|
2058
2063
|
"bend: rest (default)": "굽힘: 기본 자세 (기본값)",
|
|
2059
|
-
"between {0} and {1} there are fewer than {2} {3}values to try": "{0}와(과) {1} 사이에 시도할 {3}값이 {2}개
|
|
2060
|
-
"bindings is not a list": "bindings가 목록이
|
|
2061
|
-
"bindings[{0}] is not a non-empty list": "bindings[{0}]이(가) 비어 있지 않은 목록이
|
|
2062
|
-
"bindings[{0}] names an unknown bone or a non-finite x, y or weight": "bindings[{0}]이(가) 알 수 없는 본이나 유한하지 않은 x, y 또는 가중치를
|
|
2064
|
+
"between {0} and {1} there are fewer than {2} {3}values to try": "{0}와(과) {1} 사이에 시도할 {3}값이 {2}개 미만이에요",
|
|
2065
|
+
"bindings is not a list": "bindings가 목록이 아니에요",
|
|
2066
|
+
"bindings[{0}] is not a non-empty list": "bindings[{0}]이(가) 비어 있지 않은 목록이 아니에요",
|
|
2067
|
+
"bindings[{0}] names an unknown bone or a non-finite x, y or weight": "bindings[{0}]이(가) 알 수 없는 본이나 유한하지 않은 x, y 또는 가중치를 지정해요",
|
|
2063
2068
|
"blink ({0} still rows)": "눈 깜빡임 (고정 행 {0}개)",
|
|
2064
2069
|
"blink t": "눈 깜빡임 t",
|
|
2065
2070
|
"blink t (s)": "눈 깜빡임 t (초)",
|
|
2066
2071
|
"blink t {0} s{1} · drag to move": "눈 깜빡임 t {0}초{1} · 드래그하여 이동",
|
|
2067
2072
|
"bone": "본",
|
|
2068
|
-
"bone \"{0}\" inherit track is stepped mode data (read-only in v1)": "본 \"{0}\" 상속 트랙은 계단식 모드
|
|
2069
|
-
"bone \"{0}\" property \"{1}\" is not an editable value timeline": "본 \"{0}\" 속성 \"{1}\"은(는) 편집 가능한 값 타임라인이
|
|
2070
|
-
"bone \"{0}.{1}\" keys do not carry {2} finite numeric channel(s)": "본 \"{0}.{1}\" 키에 유한한 수치 채널 {2}개가 포함되어 있지
|
|
2071
|
-
"bone \"{0}.{1}\" uses lag/stagger timing offset (read-only in v1)": "본 \"{0}.{1}\"은(는) 지연/스태거 타이밍 오프셋을
|
|
2072
|
-
"bone \"{0}.{1}\" uses procedural derive keys (read-only in v1)": "본 \"{0}.{1}\"은(는) 절차적 파생 키를
|
|
2073
|
-
"bone hierarchy is not parent-first": "본 계층 구조가 부모 우선 순서가
|
|
2073
|
+
"bone \"{0}\" inherit track is stepped mode data (read-only in v1)": "본 \"{0}\" 상속 트랙은 계단식 모드 데이터예요 (v1에서 읽기 전용)",
|
|
2074
|
+
"bone \"{0}\" property \"{1}\" is not an editable value timeline": "본 \"{0}\" 속성 \"{1}\"은(는) 편집 가능한 값 타임라인이 아니에요",
|
|
2075
|
+
"bone \"{0}.{1}\" keys do not carry {2} finite numeric channel(s)": "본 \"{0}.{1}\" 키에 유한한 수치 채널 {2}개가 포함되어 있지 않아요",
|
|
2076
|
+
"bone \"{0}.{1}\" uses lag/stagger timing offset (read-only in v1)": "본 \"{0}.{1}\"은(는) 지연/스태거 타이밍 오프셋을 사용해요 (v1에서 읽기 전용)",
|
|
2077
|
+
"bone \"{0}.{1}\" uses procedural derive keys (read-only in v1)": "본 \"{0}.{1}\"은(는) 절차적 파생 키를 사용해요 (v1에서 읽기 전용)",
|
|
2078
|
+
"bone hierarchy is not parent-first": "본 계층 구조가 부모 우선 순서가 아니에요",
|
|
2074
2079
|
"bone property \"{0}\"": "본 속성 \"{0}\"",
|
|
2075
2080
|
"bone {0} against {1}": "{1} 대비 본 {0}",
|
|
2076
|
-
"bones is not a list": "bones가 목록이
|
|
2077
|
-
"bones[{0}] \"{1}\" holds a point that is not [x, y]": "bones[{0}] \"{1}\"에 [x, y]가 아닌 포인트가 포함되어
|
|
2078
|
-
"bones[{0}] is not an object": "bones[{0}]이(가) 객체가
|
|
2079
|
-
"bones[{0}] names no bone (no name or chain)": "bones[{0}]에 지정된 본(name 또는 chain)이
|
|
2081
|
+
"bones is not a list": "bones가 목록이 아니에요",
|
|
2082
|
+
"bones[{0}] \"{1}\" holds a point that is not [x, y]": "bones[{0}] \"{1}\"에 [x, y]가 아닌 포인트가 포함되어 있어요",
|
|
2083
|
+
"bones[{0}] is not an object": "bones[{0}]이(가) 객체가 아니에요",
|
|
2084
|
+
"bones[{0}] names no bone (no name or chain)": "bones[{0}]에 지정된 본(name 또는 chain)이 없어요",
|
|
2080
2085
|
"bones[{0}] {1}.inherit": "bones[{0}] {1}.inherit",
|
|
2081
2086
|
"bones[{0}] {1}.link_inherit": "bones[{0}] {1}.link_inherit",
|
|
2082
2087
|
"bookmark limit": "북마크 한도",
|
|
2083
2088
|
"bounded PNG crop": "제한된 PNG 크롭",
|
|
2084
2089
|
"box": "박스",
|
|
2085
2090
|
"build (assemble → rig → check)": "빌드 (assemble → rig → check)",
|
|
2086
|
-
"build id {0}… → {1}… — an input the record's build id hashes (the package, the handoff config, the build's painting, runs or named files, the keypoints, the producer or the compiler) is not what it was; the stage stays on the last Apply": "빌드 ID {0}… → {1}… — 레코드의 빌드 ID가 해싱하는 입력(패키지, 핸드오프 설정, 빌드의 원화, 실행 결과 또는 지정된 파일, 키포인트, 프로듀서 또는 컴파일러)이 변경되어 스테이지가 마지막 적용 상태를
|
|
2087
|
-
"build must be \"inspected\" or \"scratch\"": "build는 \"inspected\" 또는 \"scratch\"여야
|
|
2091
|
+
"build id {0}… → {1}… — an input the record's build id hashes (the package, the handoff config, the build's painting, runs or named files, the keypoints, the producer or the compiler) is not what it was; the stage stays on the last Apply": "빌드 ID {0}… → {1}… — 레코드의 빌드 ID가 해싱하는 입력(패키지, 핸드오프 설정, 빌드의 원화, 실행 결과 또는 지정된 파일, 키포인트, 프로듀서 또는 컴파일러)이 변경되어 스테이지가 마지막 적용 상태를 유지해요",
|
|
2092
|
+
"build must be \"inspected\" or \"scratch\"": "build는 \"inspected\" 또는 \"scratch\"여야 해요",
|
|
2088
2093
|
"bust_r ({0},{1}) r {2} band {3} → {4} · bust_l ({5},{6}) r {7} band {8} → {9} · D {10} px · the producer derives these again": "bust_r ({0},{1}) r {2} 밴드 {3} → {4} · bust_l ({5},{6}) r {7} 밴드 {8} → {9} · D {10} px · 프로듀서가 다시 계산함",
|
|
2089
2094
|
"camera center": "카메라 중심",
|
|
2090
2095
|
"camera extent": "카메라 영역",
|
|
@@ -2104,8 +2109,8 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2104
2109
|
"check.json environment sha256 {0}": "check.json 환경 sha256 {0}",
|
|
2105
2110
|
"check: ": "검사: ",
|
|
2106
2111
|
"check: no summary": "검사: 요약 없음",
|
|
2107
|
-
"checked: expected null or exactly {build, producer, summary, refusals, rows}": "checked: null 또는 정확히 {build, producer, summary, refusals, rows}여야
|
|
2108
|
-
"checkpoint.note: expected string <= 10000 characters": "checkpoint.note: 10000자 이하의 문자열이
|
|
2112
|
+
"checked: expected null or exactly {build, producer, summary, refusals, rows}": "checked: null 또는 정확히 {build, producer, summary, refusals, rows}여야 해요",
|
|
2113
|
+
"checkpoint.note: expected string <= 10000 characters": "checkpoint.note: 10000자 이하의 문자열이 필요해요",
|
|
2109
2114
|
"clean first": "사전 정리(clean first)",
|
|
2110
2115
|
"clean legs window": "다리 정리 윈도우",
|
|
2111
2116
|
"clean rest window": "기본 자세 정리 윈도우",
|
|
@@ -2120,40 +2125,40 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2120
2125
|
"common animations": "공통 애니메이션",
|
|
2121
2126
|
"compare playhead mismatch: reference={0}, a={1}, b={2}": "비교 플레이헤드 불일치: 레퍼런스={0}, a={1}, b={2}",
|
|
2122
2127
|
"compare session": "비교 세션",
|
|
2123
|
-
"compare session.binding: does not match both source hashes, rig/motion identities, reference hash and animation": "compare session.binding: 두 소스 해시, 리그/모션 식별 정보, 레퍼런스 해시 및 애니메이션과 일치하지
|
|
2124
|
-
"compare session.feedback: expected array <= 1000": "compare session.feedback: 1000개 이하의 배열이
|
|
2125
|
-
"compare session.{0}: does not match loaded comparison": "compare session.{0}: 로드된 비교와 일치하지
|
|
2128
|
+
"compare session.binding: does not match both source hashes, rig/motion identities, reference hash and animation": "compare session.binding: 두 소스 해시, 리그/모션 식별 정보, 레퍼런스 해시 및 애니메이션과 일치하지 않아요",
|
|
2129
|
+
"compare session.feedback: expected array <= 1000": "compare session.feedback: 1000개 이하의 배열이 필요해요",
|
|
2130
|
+
"compare session.{0}: does not match loaded comparison": "compare session.{0}: 로드된 비교와 일치하지 않아요",
|
|
2126
2131
|
"compare time {0}: outside shared domain {1}–{2} s": "비교 시간 {0}: 공유 도메인({1}–{2}초)을 벗어남",
|
|
2127
|
-
"compare {0} duration: expected finite seconds >= 0": "비교 {0} 길이: 0 이상의 유한한 초가
|
|
2128
|
-
"compare.reference: expected local mp4, webm or mov file": "compare.reference: 로컬 mp4, webm 또는 mov 파일이
|
|
2129
|
-
"compare.reference: expected the originally selected canonical regular file (no symlink replacement)": "compare.reference: 처음 선택된 정규 일반 파일이
|
|
2130
|
-
"compare.{0} inputs changed while reading animation": "애니메이션을 읽는 동안 compare.{0} 입력이
|
|
2131
|
-
"compare.{0}.animation.duration: expected finite number >= 0": "compare.{0}.animation.duration: 0 이상의 유한한 숫자가
|
|
2132
|
-
"compare.{0}.animation: model has no animation {1}": "compare.{0}.animation: 모델에 애니메이션 {1}이(가)
|
|
2133
|
-
"compare.{0}.model.animations: expected array": "compare.{0}.model.animations: 배열이
|
|
2134
|
-
"compare.{0}.model: expected compiled model for playback": "compare.{0}.model: 재생을 위한 컴파일된 모델이
|
|
2132
|
+
"compare {0} duration: expected finite seconds >= 0": "비교 {0} 길이: 0 이상의 유한한 초가 필요해요",
|
|
2133
|
+
"compare.reference: expected local mp4, webm or mov file": "compare.reference: 로컬 mp4, webm 또는 mov 파일이 필요해요",
|
|
2134
|
+
"compare.reference: expected the originally selected canonical regular file (no symlink replacement)": "compare.reference: 처음 선택된 정규 일반 파일이 필요해요(심볼릭 링크 교체 불가)",
|
|
2135
|
+
"compare.{0} inputs changed while reading animation": "애니메이션을 읽는 동안 compare.{0} 입력이 변경됐어요",
|
|
2136
|
+
"compare.{0}.animation.duration: expected finite number >= 0": "compare.{0}.animation.duration: 0 이상의 유한한 숫자가 필요해요",
|
|
2137
|
+
"compare.{0}.animation: model has no animation {1}": "compare.{0}.animation: 모델에 애니메이션 {1}이(가) 없어요",
|
|
2138
|
+
"compare.{0}.model.animations: expected array": "compare.{0}.model.animations: 배열이 필요해요",
|
|
2139
|
+
"compare.{0}.model: expected compiled model for playback": "compare.{0}.model: 재생을 위한 컴파일된 모델이 필요해요",
|
|
2135
2140
|
"compare: no origin line": "비교: 원점 줄 없음",
|
|
2136
2141
|
"compare: origin and tip distance per moved bone": "compare: 이동된 본별 원점 및 팁 거리",
|
|
2137
2142
|
"compiled model path ending .model.json (the play runtime input)": ".model.json으로 끝나는 컴파일된 모델 경로 (play 런타임 입력)",
|
|
2138
2143
|
"compiled player unavailable": "컴파일된 플레이어를 사용할 수 없음",
|
|
2139
|
-
"config meshes.{0} is not a contour entry; contour.bust applies to contour meshes only": "설정 meshes.{0}은(는) 윤곽 항목이
|
|
2140
|
-
"config meshes.{0} is not a contour entry; regions apply to contour meshes only": "설정 meshes.{0}은(는) 윤곽 항목이
|
|
2141
|
-
"config motion.animations_from ({0}) does not exist": "설정 motion.animations_from({0})이(가) 존재하지
|
|
2142
|
-
"config motion.animations_from ({0}) is missing from the handoff": "설정 motion.animations_from({0})이(가) 핸드오프에
|
|
2143
|
-
"config {0} holds more than {1} files": "설정 {0}에 {1}개 이상의 파일이 포함되어
|
|
2144
|
-
"config {0} holds {1}, which resolves outside the package root": "설정 {0}의 {1}이(가) 패키지 루트 외부를
|
|
2145
|
-
"config {0} is an absolute path; the handoff config names its files relative to its own directory": "설정 {0}은(는) 절대
|
|
2146
|
-
"config {0} names {1}, which does not exist": "설정 {0}이(가) 존재하지 않는 {1}을(를)
|
|
2147
|
-
"config {0} nests deeper than {1} levels": "설정 {0}의 중첩 깊이가 {1}단계를
|
|
2148
|
-
"config {0} resolves outside the package root": "설정 {0}이(가) 패키지 루트 외부를
|
|
2144
|
+
"config meshes.{0} is not a contour entry; contour.bust applies to contour meshes only": "설정 meshes.{0}은(는) 윤곽 항목이 아니에요. contour.bust는 윤곽 메시에만 적용돼요",
|
|
2145
|
+
"config meshes.{0} is not a contour entry; regions apply to contour meshes only": "설정 meshes.{0}은(는) 윤곽 항목이 아니에요. 영역은 윤곽 메시에만 적용돼요",
|
|
2146
|
+
"config motion.animations_from ({0}) does not exist": "설정 motion.animations_from({0})이(가) 존재하지 않아요",
|
|
2147
|
+
"config motion.animations_from ({0}) is missing from the handoff": "설정 motion.animations_from({0})이(가) 핸드오프에 없어요",
|
|
2148
|
+
"config {0} holds more than {1} files": "설정 {0}에 {1}개 이상의 파일이 포함되어 있어요",
|
|
2149
|
+
"config {0} holds {1}, which resolves outside the package root": "설정 {0}의 {1}이(가) 패키지 루트 외부를 가리켜요",
|
|
2150
|
+
"config {0} is an absolute path; the handoff config names its files relative to its own directory": "설정 {0}은(는) 절대 경로예요. 핸드오프 설정은 자신의 디렉터리 기준 상대 경로로 파일을 지정해야 해요",
|
|
2151
|
+
"config {0} names {1}, which does not exist": "설정 {0}이(가) 존재하지 않는 {1}을(를) 지정해요",
|
|
2152
|
+
"config {0} nests deeper than {1} levels": "설정 {0}의 중첩 깊이가 {1}단계를 초과해요",
|
|
2153
|
+
"config {0} resolves outside the package root": "설정 {0}이(가) 패키지 루트 외부를 가리켜요",
|
|
2149
2154
|
"config.constraints[{0}] · bone {1}": "config.constraints[{0}] · 본 {1}",
|
|
2150
|
-
"config.json does not declare an \"animations_from\" motion spec file.": "config.json에 \"animations_from\" 모션 사양 파일이 선언되어 있지
|
|
2151
|
-
"config.motion.blink is not {t, eyes, squash, …}": "config.motion.blink가 {t, eyes, squash, …} 형식이
|
|
2152
|
-
"config.motion.tracks[{0}] is not a chain track {chain, amps, period, phase, lag}": "config.motion.tracks[{0}]이(가) 체인 트랙 {chain, amps, period, phase, lag} 형식이
|
|
2153
|
-
"config.motion.tracks[{0}] is not a single track {bone, prop, amp, period, phase, base?}": "config.motion.tracks[{0}]이(가) 단일 트랙 {bone, prop, amp, period, phase, base?} 형식이
|
|
2154
|
-
"config.motion.tracks[{0}] is not an object": "config.motion.tracks[{0}]이(가) 객체가
|
|
2155
|
-
"config_sha256 and map_sha256 are SHA-256 hex": "config_sha256 및 map_sha256은 16진수 SHA-256이어야
|
|
2156
|
-
"config_sha256 must be a lowercase SHA-256": "config_sha256은 소문자 SHA-256이어야
|
|
2155
|
+
"config.json does not declare an \"animations_from\" motion spec file.": "config.json에 \"animations_from\" 모션 사양 파일이 선언되어 있지 않아요.",
|
|
2156
|
+
"config.motion.blink is not {t, eyes, squash, …}": "config.motion.blink가 {t, eyes, squash, …} 형식이 아니에요",
|
|
2157
|
+
"config.motion.tracks[{0}] is not a chain track {chain, amps, period, phase, lag}": "config.motion.tracks[{0}]이(가) 체인 트랙 {chain, amps, period, phase, lag} 형식이 아니에요",
|
|
2158
|
+
"config.motion.tracks[{0}] is not a single track {bone, prop, amp, period, phase, base?}": "config.motion.tracks[{0}]이(가) 단일 트랙 {bone, prop, amp, period, phase, base?} 형식이 아니에요",
|
|
2159
|
+
"config.motion.tracks[{0}] is not an object": "config.motion.tracks[{0}]이(가) 객체가 아니에요",
|
|
2160
|
+
"config_sha256 and map_sha256 are SHA-256 hex": "config_sha256 및 map_sha256은 16진수 SHA-256이어야 해요",
|
|
2161
|
+
"config_sha256 must be a lowercase SHA-256": "config_sha256은 소문자 SHA-256이어야 해요",
|
|
2157
2162
|
"consistent event t and times": "일관된 이벤트 t 및 times",
|
|
2158
2163
|
"consistent explicit start time": "일관된 명시적 시작 시간",
|
|
2159
2164
|
"consistent frame and frames": "일관된 frame 및 frames",
|
|
@@ -2161,16 +2166,16 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2161
2166
|
"consistent seconds and spanSeconds": "일관된 seconds 및 spanSeconds",
|
|
2162
2167
|
"constraint edge {0}–{1} removed": "제약 엣지 {0}–{1} 제거됨",
|
|
2163
2168
|
"constraint edge {0}–{1} {2}": "제약 엣지 {0}–{1} {2}",
|
|
2164
|
-
"context.readings.schema must be {0}": "context.readings.schema는 {0}이어야
|
|
2169
|
+
"context.readings.schema must be {0}": "context.readings.schema는 {0}이어야 해요",
|
|
2165
2170
|
"contour bridges": "윤곽 브리지(contour bridges)",
|
|
2166
2171
|
"contour {0}": "윤곽 {0}",
|
|
2167
2172
|
"contour.bust landmarks on {0} with {1} {2} · model {3}…": "{1} {2}로 {0}의 contour.bust 랜드마크 · 모델 {3}…",
|
|
2168
|
-
"contour.bust stays as written (the Chest regions editor's Landmarks mode edits it).": "contour.bust는 작성된 대로
|
|
2169
|
-
"control.comparison.effectiveLayout: must be a usable layout, null only when none is usable": "control.comparison.effectiveLayout: 사용 가능한 레이아웃이어야 하며 사용 가능한 레이아웃이 없을 때만 null이어야
|
|
2170
|
-
"control.comparison.reasons.{0}: usable layout has no refusal": "control.comparison.reasons.{0}: 사용 가능한 레이아웃에는 거부 사유가 없어야
|
|
2171
|
-
"control.schema: expected rig-review-control-command/1": "control.schema: rig-review-control-command/1이
|
|
2172
|
-
"control.view.schema: expected rig-review-view/1": "control.view.schema: rig-review-view/1이
|
|
2173
|
-
"control.{0}: expected SHA-256": "control.{0}: SHA-256이
|
|
2173
|
+
"contour.bust stays as written (the Chest regions editor's Landmarks mode edits it).": "contour.bust는 작성된 대로 유지돼요(가슴 영역 편집기의 랜드마크 모드에서 편집).",
|
|
2174
|
+
"control.comparison.effectiveLayout: must be a usable layout, null only when none is usable": "control.comparison.effectiveLayout: 사용 가능한 레이아웃이어야 하며 사용 가능한 레이아웃이 없을 때만 null이어야 해요",
|
|
2175
|
+
"control.comparison.reasons.{0}: usable layout has no refusal": "control.comparison.reasons.{0}: 사용 가능한 레이아웃에는 거부 사유가 없어야 해요",
|
|
2176
|
+
"control.schema: expected rig-review-control-command/1": "control.schema: rig-review-control-command/1이 필요해요",
|
|
2177
|
+
"control.view.schema: expected rig-review-view/1": "control.view.schema: rig-review-view/1이 필요해요",
|
|
2178
|
+
"control.{0}: expected SHA-256": "control.{0}: SHA-256이 필요해요",
|
|
2174
2179
|
"crop h": "크롭 높이(h)",
|
|
2175
2180
|
"crop w": "크롭 너비(w)",
|
|
2176
2181
|
"currentTime fallback": "currentTime 폴백",
|
|
@@ -2184,7 +2189,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2184
2189
|
"default world (the inspected build's own check)": "기본 월드 (점검 중인 빌드의 자체 검사)",
|
|
2185
2190
|
"degrees in (0, 180]": "(0, 180] 범위의 각도(°)",
|
|
2186
2191
|
"degrees in [0, 180]": "[0, 180] 범위의 각도(°)",
|
|
2187
|
-
"delta must be one rig-review-mesh-edit/1 document": "delta는 단일 rig-review-mesh-edit/1 문서여야
|
|
2192
|
+
"delta must be one rig-review-mesh-edit/1 document": "delta는 단일 rig-review-mesh-edit/1 문서여야 해요",
|
|
2188
2193
|
"delta reset": "델타 초기화됨",
|
|
2189
2194
|
"density strip close": "밀도 스트립 닫기",
|
|
2190
2195
|
"discovered outside the opened folder": "열린 폴더 외부에서 발견됨",
|
|
@@ -2209,53 +2214,53 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2209
2214
|
"every island joined into one outline by bridges (true is its one value; absent is the one-island rule)": "모든 아일랜드를 브리지로 하나의 외곽선으로 연결 (유일한 값은 true이며, 생략 시 단일 아일랜드 규칙 적용)",
|
|
2210
2215
|
"every meshed part can be re-fit": "메시가 있는 모든 파츠를 재맞춤할 수 있음",
|
|
2211
2216
|
"exit {0}": "종료 코드 {0}",
|
|
2212
|
-
"expected an array": "배열이
|
|
2213
|
-
"expected an object": "객체가
|
|
2214
|
-
"expected exactly {animation} or {animation, environment}": "정확히 {animation} 또는 {animation, environment}여야
|
|
2215
|
-
"expected exactly {fps, build, requirements}": "정확히 {fps, build, requirements}여야
|
|
2216
|
-
"expected exactly {from: <the build id on the stage>}": "정확히 {from: <스테이지의 빌드 ID>}여야
|
|
2217
|
-
"expected exactly {id: <the strip id>}": "정확히 {id: <스트립 ID>}여야
|
|
2218
|
-
"expected exactly {ops, configHash}": "정확히 {ops, configHash}여야
|
|
2219
|
-
"expected exactly {part, delta, configHash}": "정확히 {part, delta, configHash}여야
|
|
2220
|
-
"expected exactly {part, regions, configHash} or {part, bust, configHash}": "정확히 {part, regions, configHash} 또는 {part, bust, configHash}여야
|
|
2221
|
-
"expected exactly {patches}": "정확히 {patches}여야
|
|
2222
|
-
"expected exactly {patch}, {patch, environment} or {part, regions, configHash}": "정확히 {patch}, {patch, environment} 또는 {part, regions, configHash}여야
|
|
2223
|
-
"expected exactly {retarget}": "정확히 {retarget}여야
|
|
2224
|
-
"expected exactly {schema, config_sha256, ops, producer, op}": "정확히 {schema, config_sha256, ops, producer, op}여야
|
|
2225
|
-
"expected exactly {schema, config_sha256, rig, sequence, map, map_sha256, flags, producer, op}": "정확히 {schema, config_sha256, rig, sequence, map, map_sha256, flags, producer, op}여야
|
|
2226
|
-
"expected exactly {schema, sha256, size, text, checked}": "정확히 {schema, sha256, size, text, checked}여야
|
|
2227
|
-
"expected exactly {schema, sha256, size, text, usedForReadings}": "정확히 {schema, sha256, size, text, usedForReadings}여야
|
|
2228
|
-
"expected exactly {spec, steps}": "정확히 {spec, steps}여야
|
|
2229
|
-
"expected {configHash, animationsFromHash, ops, args?}": "{configHash, animationsFromHash, ops, args?}여야
|
|
2217
|
+
"expected an array": "배열이 필요해요",
|
|
2218
|
+
"expected an object": "객체가 필요해요",
|
|
2219
|
+
"expected exactly {animation} or {animation, environment}": "정확히 {animation} 또는 {animation, environment}여야 해요",
|
|
2220
|
+
"expected exactly {fps, build, requirements}": "정확히 {fps, build, requirements}여야 해요",
|
|
2221
|
+
"expected exactly {from: <the build id on the stage>}": "정확히 {from: <스테이지의 빌드 ID>}여야 해요",
|
|
2222
|
+
"expected exactly {id: <the strip id>}": "정확히 {id: <스트립 ID>}여야 해요",
|
|
2223
|
+
"expected exactly {ops, configHash}": "정확히 {ops, configHash}여야 해요",
|
|
2224
|
+
"expected exactly {part, delta, configHash}": "정확히 {part, delta, configHash}여야 해요",
|
|
2225
|
+
"expected exactly {part, regions, configHash} or {part, bust, configHash}": "정확히 {part, regions, configHash} 또는 {part, bust, configHash}여야 해요",
|
|
2226
|
+
"expected exactly {patches}": "정확히 {patches}여야 해요",
|
|
2227
|
+
"expected exactly {patch}, {patch, environment} or {part, regions, configHash}": "정확히 {patch}, {patch, environment} 또는 {part, regions, configHash}여야 해요",
|
|
2228
|
+
"expected exactly {retarget}": "정확히 {retarget}여야 해요",
|
|
2229
|
+
"expected exactly {schema, config_sha256, ops, producer, op}": "정확히 {schema, config_sha256, ops, producer, op}여야 해요",
|
|
2230
|
+
"expected exactly {schema, config_sha256, rig, sequence, map, map_sha256, flags, producer, op}": "정확히 {schema, config_sha256, rig, sequence, map, map_sha256, flags, producer, op}여야 해요",
|
|
2231
|
+
"expected exactly {schema, sha256, size, text, checked}": "정확히 {schema, sha256, size, text, checked}여야 해요",
|
|
2232
|
+
"expected exactly {schema, sha256, size, text, usedForReadings}": "정확히 {schema, sha256, size, text, usedForReadings}여야 해요",
|
|
2233
|
+
"expected exactly {spec, steps}": "정확히 {spec, steps}여야 해요",
|
|
2234
|
+
"expected {configHash, animationsFromHash, ops, args?}": "{configHash, animationsFromHash, ops, args?}여야 해요",
|
|
2230
2235
|
"explicit CLI reference": "명시적 CLI 레퍼런스",
|
|
2231
|
-
"feedback frames: expected inclusive integer 0 <= frameStart <= frameEnd": "피드백 프레임: 0 <= frameStart <= frameEnd를 만족하는 양끝 포함 정수가
|
|
2232
|
-
"feedback.context.animation: {0} not in model": "feedback.context.animation: {0}이(가) 모델에
|
|
2236
|
+
"feedback frames: expected inclusive integer 0 <= frameStart <= frameEnd": "피드백 프레임: 0 <= frameStart <= frameEnd를 만족하는 양끝 포함 정수가 필요해요",
|
|
2237
|
+
"feedback.context.animation: {0} not in model": "feedback.context.animation: {0}이(가) 모델에 없어요",
|
|
2233
2238
|
"feedback.context.environmentSchedule: {0}": "feedback.context.environmentSchedule: {0}",
|
|
2234
|
-
"feedback.context.environment{0}: expected {1}": "feedback.context.environment{0}: {1}이(가)
|
|
2235
|
-
"feedback.context.interval: must match chosen inclusive frameStart/frameEnd": "feedback.context.interval: 선택한 양끝 포함 frameStart/frameEnd와 일치해야
|
|
2239
|
+
"feedback.context.environment{0}: expected {1}": "feedback.context.environment{0}: {1}이(가) 필요해요",
|
|
2240
|
+
"feedback.context.interval: must match chosen inclusive frameStart/frameEnd": "feedback.context.interval: 선택한 양끝 포함 frameStart/frameEnd와 일치해야 해요",
|
|
2236
2241
|
"feedback.context.requirements: {0}": "feedback.context.requirements: {0}",
|
|
2237
|
-
"feedback.frameEnd: {0} beyond clip last frame {1}": "feedback.frameEnd: {0}이(가) 클립 마지막 프레임({1})을
|
|
2238
|
-
"feedback.summary: expected one line <= 1000 characters": "feedback.summary: 1000자 이하의 한 줄 요약이
|
|
2239
|
-
"feedback.target.kind: expected bone | slot | rig": "feedback.target.kind: bone | slot | rig 중 하나여야
|
|
2240
|
-
"feedback.target.name: not in inspected model/package": "feedback.target.name: 점검 중인 모델/패키지에
|
|
2241
|
-
"feedback.target.name: {0} validation unavailable without model names": "feedback.target.name: 모델 이름이 없어 {0} 유효성 검사를 수행할 수
|
|
2242
|
-
"feedback.target.name: {0} validation unavailable without model {1} names": "feedback.target.name: 모델 {1} 이름이 없어 {0} 유효성 검사를 수행할 수
|
|
2243
|
-
"feedback.target.name: {0} {1} not in {2}": "feedback.target.name: {0} {1}이(가) {2}에
|
|
2242
|
+
"feedback.frameEnd: {0} beyond clip last frame {1}": "feedback.frameEnd: {0}이(가) 클립 마지막 프레임({1})을 초과해요",
|
|
2243
|
+
"feedback.summary: expected one line <= 1000 characters": "feedback.summary: 1000자 이하의 한 줄 요약이 필요해요",
|
|
2244
|
+
"feedback.target.kind: expected bone | slot | rig": "feedback.target.kind: bone | slot | rig 중 하나여야 해요",
|
|
2245
|
+
"feedback.target.name: not in inspected model/package": "feedback.target.name: 점검 중인 모델/패키지에 없어요",
|
|
2246
|
+
"feedback.target.name: {0} validation unavailable without model names": "feedback.target.name: 모델 이름이 없어 {0} 유효성 검사를 수행할 수 없어요",
|
|
2247
|
+
"feedback.target.name: {0} validation unavailable without model {1} names": "feedback.target.name: 모델 {1} 이름이 없어 {0} 유효성 검사를 수행할 수 없어요",
|
|
2248
|
+
"feedback.target.name: {0} {1} not in {2}": "feedback.target.name: {0} {1}이(가) {2}에 없어요",
|
|
2244
2249
|
"fewest triangles passing": "통과 항목 중 최소 삼각형 수",
|
|
2245
2250
|
"file inside package (symlinks may not escape)": "패키지 내부 파일 (심볼릭 링크가 외부를 가리킬 수 없음)",
|
|
2246
2251
|
"finite number": "유한한 숫자",
|
|
2247
2252
|
"finite number >= {0}": "{0} 이상의 유한한 숫자",
|
|
2248
2253
|
"first <= last": "first <= last",
|
|
2249
|
-
"flags.animation must be an animation name ([A-Za-z0-9_][A-Za-z0-9_.-], at most 64)": "flags.animation은 애니메이션 이름이어야
|
|
2250
|
-
"flags.legScale must be [min, max] or null": "flags.legScale은 [최솟값, 최댓값] 또는 null이어야
|
|
2251
|
-
"flags.legScale must hold 0 < min ≤ 1 ≤ max": "flags.legScale은 0 < 최솟값 ≤ 1 ≤ 최댓값을 만족해야
|
|
2254
|
+
"flags.animation must be an animation name ([A-Za-z0-9_][A-Za-z0-9_.-], at most 64)": "flags.animation은 애니메이션 이름이어야 해요([A-Za-z0-9_][A-Za-z0-9_.-], 최대 64자)",
|
|
2255
|
+
"flags.legScale must be [min, max] or null": "flags.legScale은 [최솟값, 최댓값] 또는 null이어야 해요",
|
|
2256
|
+
"flags.legScale must hold 0 < min ≤ 1 ≤ max": "flags.legScale은 0 < 최솟값 ≤ 1 ≤ 최댓값을 만족해야 해요",
|
|
2252
2257
|
"flip degrees": "반전(flip) 각도(°)",
|
|
2253
2258
|
"flip °": "반전 °",
|
|
2254
2259
|
"folding meshes": "접히는 메시",
|
|
2255
2260
|
"fps ": "fps ",
|
|
2256
|
-
"fps must be a number above 0, at most 240": "fps는 0보다 크고 240 이하인 숫자여야
|
|
2261
|
+
"fps must be a number above 0, at most 240": "fps는 0보다 크고 240 이하인 숫자여야 해요",
|
|
2257
2262
|
"fps: a number above 0, at most 240": "fps: 0보다 크고 240 이하인 숫자",
|
|
2258
|
-
"frame is unavailable: no explicit producer frame index at this time (COMMENT_FRAME_UNAVAILABLE)": "프레임을 사용할 수 없음: 이 시간에 명시적 프로듀서 프레임 인덱스가
|
|
2263
|
+
"frame is unavailable: no explicit producer frame index at this time (COMMENT_FRAME_UNAVAILABLE)": "프레임을 사용할 수 없음: 이 시간에 명시적 프로듀서 프레임 인덱스가 없어요 (COMMENT_FRAME_UNAVAILABLE)",
|
|
2259
2264
|
"frame time": "프레임 시간",
|
|
2260
2265
|
"frame/frames or explicit t/times event coordinates": "frame/frames 또는 명시적 t/times 이벤트 좌표",
|
|
2261
2266
|
"frameTimes mapping": "frameTimes 매핑",
|
|
@@ -2271,9 +2276,9 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2271
2276
|
"has an unknown op": "알 수 없는 작업이 포함되어 있음",
|
|
2272
2277
|
"has no mode": "모드가 없음",
|
|
2273
2278
|
"has {0}": "{0} 포함",
|
|
2274
|
-
"has {0} point(s); 3 or more [x, y] in rig pixels are required": "점 {0}개가
|
|
2275
|
-
"held time not decoded yet": "유지된 시간이 아직 디코딩되지
|
|
2276
|
-
"held time {0} s is outside the video domain 0–{1} s": "유지된 시간 {0}초가 비디오 도메인(0–{1}초)을
|
|
2279
|
+
"has {0} point(s); 3 or more [x, y] in rig pixels are required": "점 {0}개가 있어요. 리그 픽셀 단위의 [x, y]가 3개 이상 필요해요",
|
|
2280
|
+
"held time not decoded yet": "유지된 시간이 아직 디코딩되지 않았어요",
|
|
2281
|
+
"held time {0} s is outside the video domain 0–{1} s": "유지된 시간 {0}초가 비디오 도메인(0–{1}초)을 벗어났어요",
|
|
2277
2282
|
"hips inferred": "골반(hips) 추론됨",
|
|
2278
2283
|
"hold tip": "팁 고정(hold tip)",
|
|
2279
2284
|
"holds no named entry": "이름이 지정된 항목이 없음",
|
|
@@ -2288,8 +2293,8 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2288
2293
|
"influence max": "최대 영향력(influence max)",
|
|
2289
2294
|
"influence radius": "영향 반경(influence radius)",
|
|
2290
2295
|
"influence shape": "영향 형태(influence shape)",
|
|
2291
|
-
"inherit is a mode name": "inherit는 모드 이름이어야
|
|
2292
|
-
"initial.animation: model has no animation {0}": "initial.animation: 모델에 애니메이션 {0}이(가)
|
|
2296
|
+
"inherit is a mode name": "inherit는 모드 이름이어야 해요",
|
|
2297
|
+
"initial.animation: model has no animation {0}": "initial.animation: 모델에 애니메이션 {0}이(가) 없어요",
|
|
2293
2298
|
"input id": "입력 ID",
|
|
2294
2299
|
"inputs changed": "입력이 변경됨",
|
|
2295
2300
|
"inspected check: failed — {0}": "점검 빌드 검사: 실패 — {0}",
|
|
@@ -2303,34 +2308,34 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2303
2308
|
"inward {0}°": "안쪽 {0}°",
|
|
2304
2309
|
"is \"{0}\"": "\"{0}\"임",
|
|
2305
2310
|
"is absent and required": "누락되었으며 필수 항목임",
|
|
2306
|
-
"is declared beside rule \"heat\"; the exponent belongs to the distance rule — remove exponent, or declare rule \"distance\"": "규칙 \"heat\"와 함께
|
|
2307
|
-
"is declared on a contour mesh; that mode states it in contour.stray": "윤곽 메시에
|
|
2308
|
-
"is declared on a lattice mesh (grid); ribs are placed by the contour and auto modes": "격자 메시(grid)에
|
|
2309
|
-
"is keyed by {0} tracks: {1}; one track per bone property is required — the idle would hold {2} timelines on {3}, and rigc refuses two tracks on one bone property. Merge them into one track, or key another property or bone": "{0}개 트랙({1})에서 키가
|
|
2311
|
+
"is declared beside rule \"heat\"; the exponent belongs to the distance rule — remove exponent, or declare rule \"distance\"": "규칙 \"heat\"와 함께 선언됐어요. exponent는 distance 규칙에 속하므로 exponent를 제거하거나 규칙 \"distance\"를 선언하세요",
|
|
2312
|
+
"is declared on a contour mesh; that mode states it in contour.stray": "윤곽 메시에 선언됐어요. 해당 모드에서는 contour.stray에 지정해요",
|
|
2313
|
+
"is declared on a lattice mesh (grid); ribs are placed by the contour and auto modes": "격자 메시(grid)에 선언됐어요. 리브(ribs)는 윤곽(contour) 및 자동(auto) 모드에서 배치돼요",
|
|
2314
|
+
"is keyed by {0} tracks: {1}; one track per bone property is required — the idle would hold {2} timelines on {3}, and rigc refuses two tracks on one bone property. Merge them into one track, or key another property or bone": "{0}개 트랙({1})에서 키가 설정됐어요. 본 속성당 하나의 트랙만 허용돼요 — 아이들이 {3}에 타임라인 {2}개를 생성하게 되며 rigc는 하나의 본 속성에 대한 두 트랙을 거부해요. 하나로 병합하거나 다른 속성 또는 본에 키를 설정하세요",
|
|
2310
2315
|
"is not a field of a mesh entry": "메시 항목의 필드가 아님",
|
|
2311
2316
|
"is not a field of contour": "contour의 필드가 아님",
|
|
2312
|
-
"is {0} s against a {1} s idle, {2} cycles; a whole number of cycles is required or the loop's last frame is not its first": "{1}초 아이들 대비 {0}초({2}주기)
|
|
2313
|
-
"is {0} s; the blink's keys run from t to t + {1} s between the idle's first key at 0 and its last at {2} s, so 0 < t < {3} is required": "{0}
|
|
2314
|
-
"is {0}; \"circle\" (with cx, cy, r) or \"polygon\" (with points) is required": "{0}
|
|
2315
|
-
"is {0}; \"cut\" or \"continuous\" is required": "{0}
|
|
2316
|
-
"is {0}; \"distance\" or \"heat\" is required": "{0}
|
|
2317
|
-
"is {0}; 0, or 1 px or more, is required": "{0}
|
|
2318
|
-
"is {0}; a bone config.bones declares is required — the region's control bone": "{0}
|
|
2319
|
-
"is {0}; a chain declared in config.bones is required": "{0}
|
|
2320
|
-
"is {0}; a declared bone is required": "{0}
|
|
2321
|
-
"is {0}; a multiple of 1/{1} px is required": "{0}
|
|
2322
|
-
"is {0}; a non-negative number is required": "{0}
|
|
2323
|
-
"is {0}; a positive number is required": "{0}
|
|
2324
|
-
"is {0}; a whole number, 0 or more, is required": "{0}
|
|
2325
|
-
"is {0}; a whole number, 1 or more, is required": "{0}
|
|
2326
|
-
"is {0}; a whole number, 3 or more, is required": "{0}
|
|
2327
|
-
"is {0}; a {1}number is required": "{0}
|
|
2328
|
-
"is {0}; an integer at or above 1, or null, is required": "{0}
|
|
2329
|
-
"is {0}; true is required — remove the field for the one-island rule": "{0}
|
|
2317
|
+
"is {0} s against a {1} s idle, {2} cycles; a whole number of cycles is required or the loop's last frame is not its first": "{1}초 아이들 대비 {0}초({2}주기)예요. 정수 주기가 아니면 루프의 마지막 프레임과 첫 프레임이 이어지지 않아요",
|
|
2318
|
+
"is {0} s; the blink's keys run from t to t + {1} s between the idle's first key at 0 and its last at {2} s, so 0 < t < {3} is required": "{0}초예요. 눈 깜빡임 키는 아이들의 첫 키(0)와 마지막 키({2}초) 사이에서 t부터 t + {1}초까지 실행되므로 0 < t < {3}이어야 해요",
|
|
2319
|
+
"is {0}; \"circle\" (with cx, cy, r) or \"polygon\" (with points) is required": "{0}이에요. \"circle\"(cx, cy, r 포함) 또는 \"polygon\"(points 포함)이 필요해요",
|
|
2320
|
+
"is {0}; \"cut\" or \"continuous\" is required": "{0}이에요. \"cut\" 또는 \"continuous\"가 필요해요",
|
|
2321
|
+
"is {0}; \"distance\" or \"heat\" is required": "{0}이에요. \"distance\" 또는 \"heat\"가 필요해요",
|
|
2322
|
+
"is {0}; 0, or 1 px or more, is required": "{0}이에요. 0 또는 1 px 이상이 필요해요",
|
|
2323
|
+
"is {0}; a bone config.bones declares is required — the region's control bone": "{0}이에요. config.bones에 선언된 본(영역의 제어 본)이 필요해요",
|
|
2324
|
+
"is {0}; a chain declared in config.bones is required": "{0}이에요. config.bones에 선언된 체인이 필요해요",
|
|
2325
|
+
"is {0}; a declared bone is required": "{0}이에요. 선언된 본이 필요해요",
|
|
2326
|
+
"is {0}; a multiple of 1/{1} px is required": "{0}이에요. 1/{1} px의 배수가 필요해요",
|
|
2327
|
+
"is {0}; a non-negative number is required": "{0}이에요. 0 이상의 숫자가 필요해요",
|
|
2328
|
+
"is {0}; a positive number is required": "{0}이에요. 양수가 필요해요",
|
|
2329
|
+
"is {0}; a whole number, 0 or more, is required": "{0}이에요. 0 이상의 정수가 필요해요",
|
|
2330
|
+
"is {0}; a whole number, 1 or more, is required": "{0}이에요. 1 이상의 정수가 필요해요",
|
|
2331
|
+
"is {0}; a whole number, 3 or more, is required": "{0}이에요. 3 이상의 정수가 필요해요",
|
|
2332
|
+
"is {0}; a {1}number is required": "{0}이에요. {1}숫자가 필요해요",
|
|
2333
|
+
"is {0}; an integer at or above 1, or null, is required": "{0}이에요. 1 이상의 정수 또는 null이 필요해요",
|
|
2334
|
+
"is {0}; true is required — remove the field for the one-island rule": "{0}이에요. true가 필요해요 — 단일 아일랜드 규칙을 사용하려면 필드를 제거하세요",
|
|
2330
2335
|
"its value": "해당 값",
|
|
2331
2336
|
"joins a vertex to itself": "정점을 자기 자신과 연결함",
|
|
2332
2337
|
"joint = {0} origin": "관절 = {0} 원점",
|
|
2333
|
-
"keyed animation editing is read-only in comparison sessions until per-side animation rebuild is wired.": "비교 세션에서는 사이드별 애니메이션 리빌드가 연결될 때까지 키 애니메이션 편집이 읽기
|
|
2338
|
+
"keyed animation editing is read-only in comparison sessions until per-side animation rebuild is wired.": "비교 세션에서는 사이드별 애니메이션 리빌드가 연결될 때까지 키 애니메이션 편집이 읽기 전용이에요.",
|
|
2334
2339
|
"lag {0}": "지연(lag) {0}",
|
|
2335
2340
|
"last time matching declared frame time base": "선언된 프레임 시간 기준과 일치하는 마지막 시간",
|
|
2336
2341
|
"latest scratch build": "최신 임시 빌드",
|
|
@@ -2343,17 +2348,17 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2343
2348
|
"leg slot": "다리 슬롯",
|
|
2344
2349
|
"length ratio": "길이 비율",
|
|
2345
2350
|
"limb {0} · {1} → {2} ({3})": "팔다리 {0} · {1} → {2} ({3})",
|
|
2346
|
-
"limbs.{0} has no segments": "limbs.{0}에 세그먼트가
|
|
2347
|
-
"limbs.{0}.segments[{1}] is not {part, from, bone}": "limbs.{0}.segments[{1}]이(가) {part, from, bone} 형식이
|
|
2348
|
-
"link_inherit is {<link>: mode}": "link_inherit는 {<링크>: 모드} 형식이어야
|
|
2351
|
+
"limbs.{0} has no segments": "limbs.{0}에 세그먼트가 없어요",
|
|
2352
|
+
"limbs.{0}.segments[{1}] is not {part, from, bone}": "limbs.{0}.segments[{1}]이(가) {part, from, bone} 형식이 아니에요",
|
|
2353
|
+
"link_inherit is {<link>: mode}": "link_inherit는 {<링크>: 모드} 형식이어야 해요",
|
|
2349
2354
|
"literal relative model page path": "리터럴 상대 모델 페이지 경로",
|
|
2350
2355
|
"literal relative path inside package; no traversal, encoding, backslash, query or fragment": "패키지 내부의 리터럴 상대 경로; 상위 경로 이동, 인코딩, 백슬래시, 쿼리 또는 프래그먼트 불가",
|
|
2351
|
-
"map is over {0} bytes": "맵 크기가 {0}바이트를
|
|
2352
|
-
"map must be a {0} document": "맵은 {0} 문서여야
|
|
2353
|
-
"map.chains must hold 1–64 chains": "map.chains에는 1–64개의 체인이 포함되어야
|
|
2354
|
-
"map.chains[{0}] must be an object": "map.chains[{0}]은(는) 객체여야
|
|
2355
|
-
"map.chains[{0}].{1} must hold 1–32 names": "map.chains[{0}].{1}에는 1–32개의 이름이 포함되어야
|
|
2356
|
-
"map_sha256 is not the map's": "map_sha256이 맵의 해시와 일치하지
|
|
2356
|
+
"map is over {0} bytes": "맵 크기가 {0}바이트를 초과해요",
|
|
2357
|
+
"map must be a {0} document": "맵은 {0} 문서여야 해요",
|
|
2358
|
+
"map.chains must hold 1–64 chains": "map.chains에는 1–64개의 체인이 포함되어야 해요",
|
|
2359
|
+
"map.chains[{0}] must be an object": "map.chains[{0}]은(는) 객체여야 해요",
|
|
2360
|
+
"map.chains[{0}].{1} must hold 1–32 names": "map.chains[{0}].{1}에는 1–32개의 이름이 포함되어야 해요",
|
|
2361
|
+
"map_sha256 is not the map's": "map_sha256이 맵의 해시와 일치하지 않아요",
|
|
2357
2362
|
"measured {0}{1}": "측정값 {0}{1}",
|
|
2358
2363
|
"mesh ": "메시 ",
|
|
2359
2364
|
"mesh edit on {0}": "{0}의 메시 편집",
|
|
@@ -2361,30 +2366,30 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2361
2366
|
"mesh name": "메시 이름",
|
|
2362
2367
|
"mesh r": "메시 r",
|
|
2363
2368
|
"mesh {0} (slot {1})": "메시 {0} (슬롯 {1})",
|
|
2364
|
-
"meshes.{0} is a {1} entry; a strip runs over grid (lattice) or contour.spacing (contour) only": "meshes.{0}은(는) {1}
|
|
2365
|
-
"meshes.{0}.{1} is not a number": "meshes.{0}.{1}은(는) 숫자가
|
|
2369
|
+
"meshes.{0} is a {1} entry; a strip runs over grid (lattice) or contour.spacing (contour) only": "meshes.{0}은(는) {1} 항목이에요. 스트립은 grid(격자) 또는 contour.spacing(윤곽)에서만 실행돼요",
|
|
2370
|
+
"meshes.{0}.{1} is not a number": "meshes.{0}.{1}은(는) 숫자가 아니에요",
|
|
2366
2371
|
"min < max": "최솟값 < 최댓값",
|
|
2367
2372
|
"min score": "최소 점수",
|
|
2368
2373
|
"missing ": "누락됨: ",
|
|
2369
2374
|
"model animations": "모델 애니메이션",
|
|
2370
|
-
"model bytes differ from reviewed SHA-256": "모델 바이트가 리뷰된 SHA-256과
|
|
2371
|
-
"model exceeds 128 MiB": "모델이 128 MiB를
|
|
2375
|
+
"model bytes differ from reviewed SHA-256": "모델 바이트가 리뷰된 SHA-256과 달라요",
|
|
2376
|
+
"model exceeds 128 MiB": "모델이 128 MiB를 초과해요",
|
|
2372
2377
|
"model page resolved inside package": "패키지 내부로 해석되는 모델 페이지",
|
|
2373
2378
|
"model request failed ({0})": "모델 요청 실패 ({0})",
|
|
2374
2379
|
"model slider {0} → bone {1}, {2}, animation {3}{4}": "모델 슬라이더 {0} → 본 {1}, {2}, 애니메이션 {3}{4}",
|
|
2375
2380
|
"model stage {0}×{1} at ({2}, {3}), root at world origin: world = (x − {4}, {5} − y)": "모델 스테이지 ({2}, {3})에서 {0}×{1}, 루트는 월드 원점: world = (x − {4}, {5} − y)",
|
|
2376
2381
|
"motion SHA-256": "모션 SHA-256",
|
|
2377
|
-
"motion.blink.still.{0} is not {row, bone}": "motion.blink.still.{0}이(가) {row, bone} 형식이
|
|
2382
|
+
"motion.blink.still.{0} is not {row, bone}": "motion.blink.still.{0}이(가) {row, bone} 형식이 아니에요",
|
|
2378
2383
|
"moved {0} vertex": "정점 {0}개 이동됨",
|
|
2379
2384
|
"moved {0} vertexes": "정점 {0}개 이동됨",
|
|
2380
2385
|
"moving pairs": "움직이는 쌍",
|
|
2381
|
-
"name {0} is declared already": "이름 {0}은(는) 이미 선언되어
|
|
2382
|
-
"name {0}: a letter, then letters, digits and underscores": "이름 {0}: 영문자로 시작하며 영문자, 숫자 및 밑줄(_)만
|
|
2386
|
+
"name {0} is declared already": "이름 {0}은(는) 이미 선언되어 있어요",
|
|
2387
|
+
"name {0}: a letter, then letters, digits and underscores": "이름 {0}: 영문자로 시작하며 영문자, 숫자 및 밑줄(_)만 허용돼요",
|
|
2383
2388
|
"names \"{0}\", which is not a bone": "본이 아닌 \"{0}\"을(를) 지정함",
|
|
2384
2389
|
"names \"{0}\", which this mesh's segments do not name": "이 메시의 세그먼트가 지정하지 않은 \"{0}\"을(를) 지정함",
|
|
2385
2390
|
"names neither maxInfluences nor floor": "maxInfluences와 floor 중 어느 것도 지정하지 않음",
|
|
2386
2391
|
"names no live vertex {0}": "유효한 정점 {0}을(를) 가리키지 않음",
|
|
2387
|
-
"nearest decoded frame at {0} s is outside the shared clip domain; choose an earlier supported reference frame": "{0}초의 가장 가까운 디코딩 프레임이 공유 클립 도메인을
|
|
2392
|
+
"nearest decoded frame at {0} s is outside the shared clip domain; choose an earlier supported reference frame": "{0}초의 가장 가까운 디코딩 프레임이 공유 클립 도메인을 벗어났어요. 지원되는 이전 레퍼런스 프레임을 선택하세요",
|
|
2388
2393
|
"nearest-first slots": "가장 가까운 순서의 슬롯",
|
|
2389
2394
|
"needs a finite at": "유한한 at 값이 필요함",
|
|
2390
2395
|
"needs finite from/to": "유한한 from/to 값이 필요함",
|
|
@@ -2394,7 +2399,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2394
2399
|
"new patch": "새 패치",
|
|
2395
2400
|
"new polygon": "새 다각형",
|
|
2396
2401
|
"new · will be config.motion.tracks[{0}]": "신규 · config.motion.tracks[{0}](으)로 추가됨",
|
|
2397
|
-
"no Apply is on the stage; the inspected build is": "스테이지에 적용된 빌드가 없으며 점검 중인 빌드가 표시되어
|
|
2402
|
+
"no Apply is on the stage; the inspected build is": "스테이지에 적용된 빌드가 없으며 점검 중인 빌드가 표시되어 있어요",
|
|
2398
2403
|
"no active attachment ({0})": "활성 어태치먼트 없음 ({0})",
|
|
2399
2404
|
"no active attachment · ": "활성 어태치먼트 없음 · ",
|
|
2400
2405
|
"no active attachment · {0}": "활성 어태치먼트 없음 · {0}",
|
|
@@ -2405,13 +2410,13 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2405
2410
|
"no bone moved": "이동한 본 없음",
|
|
2406
2411
|
"no counts": "카운트 없음",
|
|
2407
2412
|
"no diff": "변경사항 없음",
|
|
2408
|
-
"no drawn root bone position": "그려진 루트 본 위치가
|
|
2413
|
+
"no drawn root bone position": "그려진 루트 본 위치가 없어요",
|
|
2409
2414
|
"no part changed · parts.json differs at {0} path(s)": "변경된 파츠 없음 · parts.json 경로 {0}개 차이",
|
|
2410
2415
|
"no producer handoff": "프로듀서 핸드오프 없음",
|
|
2411
2416
|
"no ribs": "리브(ribs) 없음",
|
|
2412
|
-
"no slot of the rig spec holds a mesh attachment": "리그 사양의 어떤 슬롯도 메시 어태치먼트를 포함하지
|
|
2417
|
+
"no slot of the rig spec holds a mesh attachment": "리그 사양의 어떤 슬롯도 메시 어태치먼트를 포함하지 않아요",
|
|
2413
2418
|
"no still row": "고정 행 없음",
|
|
2414
|
-
"no sub-mode — Escape again leaves mesh edit": "하위 모드 없음 — Escape를 다시 누르면 메시 편집을
|
|
2419
|
+
"no sub-mode — Escape again leaves mesh edit": "하위 모드 없음 — Escape를 다시 누르면 메시 편집을 종료해요",
|
|
2415
2420
|
"no turn": "회전(turn) 없음",
|
|
2416
2421
|
"non-finite number": "유한하지 않은 숫자",
|
|
2417
2422
|
"non-negative ": "0 이상의 ",
|
|
@@ -2439,42 +2444,42 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2439
2444
|
"nudged {0} vertexes by {1}, {2} crop px": "정점 {0}개를 {1}, {2} 크롭 px만큼 미세 이동함",
|
|
2440
2445
|
"number > 0": "0보다 큰 숫자",
|
|
2441
2446
|
"number in [{0}, {1}]": "[{0}, {1}] 범위의 숫자",
|
|
2442
|
-
"number {0} needs exponent notation": "숫자 {0}에는 지수 표기법이
|
|
2443
|
-
"object required": "객체가
|
|
2444
|
-
"onEdge must be a pair": "onEdge는 쌍이어야
|
|
2447
|
+
"number {0} needs exponent notation": "숫자 {0}에는 지수 표기법이 필요해요",
|
|
2448
|
+
"object required": "객체가 필요해요",
|
|
2449
|
+
"onEdge must be a pair": "onEdge는 쌍이어야 해요",
|
|
2445
2450
|
"one region, {0}": "영역 1개, {0}",
|
|
2446
2451
|
"one time per reported frame": "보고된 프레임당 하나의 시간",
|
|
2447
2452
|
"only {0}": "{0}만 허용됨",
|
|
2448
|
-
"only {} may be added at /motion/blink/still": "/motion/blink/still에는 {}만 추가할 수
|
|
2449
|
-
"op must be exactly {cmd, args}": "op는 정확히 {cmd, args}여야
|
|
2450
|
-
"op must be {cmd: \"retarget\", args, clean}, the argv of its flags": "op는 플래그의 argv인 {cmd: \"retarget\", args, clean}이어야
|
|
2451
|
-
"op.args: remesh needs --part <name>": "op.args: remesh에는 --part <이름>이
|
|
2452
|
-
"op.args: {0} given twice": "op.args: {0}이(가) 두 번
|
|
2453
|
-
"op.args: {0} has no value": "op.args: {0}에 값이
|
|
2454
|
-
"op.args: {0} is not a flag a patch may pass to {1} (allowed: {2})": "op.args: {0}은(는) 패치가 {1}에 전달할 수 있는 플래그가
|
|
2453
|
+
"only {} may be added at /motion/blink/still": "/motion/blink/still에는 {}만 추가할 수 있어요",
|
|
2454
|
+
"op must be exactly {cmd, args}": "op는 정확히 {cmd, args}여야 해요",
|
|
2455
|
+
"op must be {cmd: \"retarget\", args, clean}, the argv of its flags": "op는 플래그의 argv인 {cmd: \"retarget\", args, clean}이어야 해요",
|
|
2456
|
+
"op.args: remesh needs --part <name>": "op.args: remesh에는 --part <이름>이 필요해요",
|
|
2457
|
+
"op.args: {0} given twice": "op.args: {0}이(가) 두 번 지정됐어요",
|
|
2458
|
+
"op.args: {0} has no value": "op.args: {0}에 값이 없어요",
|
|
2459
|
+
"op.args: {0} is not a flag a patch may pass to {1} (allowed: {2})": "op.args: {0}은(는) 패치가 {1}에 전달할 수 있는 플래그가 아니에요 (허용: {2})",
|
|
2455
2460
|
"op.args: {0} {1} (allowed: {2})": "op.args: {0} {1} (허용: {2})",
|
|
2456
2461
|
"op.cmd {0} (supported: {1})": "op.cmd {0} (지원: {1})",
|
|
2457
2462
|
"open.animation: conflicting report animations: {0}; select --animation explicitly": "open.animation: 충돌하는 리포트 애니메이션: {0}; --animation을 명시적으로 선택하세요",
|
|
2458
|
-
"open.animation: expected --animation; {0}: {1}": "open.animation: --animation이
|
|
2459
|
-
"open.{0}.animation: model has no animation {1}": "open.{0}.animation: 모델에 애니메이션 {1}이(가)
|
|
2460
|
-
"open.{0}.animation: validation unavailable without compiled model": "open.{0}.animation: 컴파일된 모델 없이는 유효성 검사를 수행할 수
|
|
2461
|
-
"ops must be an array": "ops는 배열이어야
|
|
2462
|
-
"ops must hold 1–{0} operations": "ops에는 1–{0}개의 작업이 포함되어야
|
|
2463
|
-
"ops must hold at least 1 operation; nothing to apply": "ops에는 최소 1개의 작업이 포함되어야
|
|
2464
|
-
"ops must hold at most {0} entries (got {1})": "ops에는 최대 {0}개의 항목만 포함할 수
|
|
2465
|
-
"ops[{0}] must be an object": "ops[{0}]은(는) 객체여야
|
|
2466
|
-
"ops[{0}] {1} records \"{2}\", but it addresses no named list entry": "ops[{0}] {1}이(가) \"{2}\"을(를) 기록하지만 이름이 지정된 목록 항목을 가리키지
|
|
2463
|
+
"open.animation: expected --animation; {0}: {1}": "open.animation: --animation이 필요해요; {0}: {1}",
|
|
2464
|
+
"open.{0}.animation: model has no animation {1}": "open.{0}.animation: 모델에 애니메이션 {1}이(가) 없어요",
|
|
2465
|
+
"open.{0}.animation: validation unavailable without compiled model": "open.{0}.animation: 컴파일된 모델 없이는 유효성 검사를 수행할 수 없어요",
|
|
2466
|
+
"ops must be an array": "ops는 배열이어야 해요",
|
|
2467
|
+
"ops must hold 1–{0} operations": "ops에는 1–{0}개의 작업이 포함되어야 해요",
|
|
2468
|
+
"ops must hold at least 1 operation; nothing to apply": "ops에는 최소 1개의 작업이 포함되어야 해요. 적용할 항목이 없어요",
|
|
2469
|
+
"ops must hold at most {0} entries (got {1})": "ops에는 최대 {0}개의 항목만 포함할 수 있어요(전달됨: {1})",
|
|
2470
|
+
"ops[{0}] must be an object": "ops[{0}]은(는) 객체여야 해요",
|
|
2471
|
+
"ops[{0}] {1} records \"{2}\", but it addresses no named list entry": "ops[{0}] {1}이(가) \"{2}\"을(를) 기록하지만 이름이 지정된 목록 항목을 가리키지 않아요",
|
|
2467
2472
|
"ops[{0}] {1} records \"{2}\", but {3} {4} in the handoff config": "ops[{0}] {1}이(가) \"{2}\"을(를) 기록하지만 핸드오프 설정에서 {3} {4}",
|
|
2468
|
-
"ops[{0}] {1} {2}: the Bones block replaces /bones/<i>/at, /bones/<i>/points/<k> or /bones/<i>/tip only (adding, removing or re-parenting bones is out of scope)": "ops[{0}] {1} {2}: 본(Bones) 블록은 /bones/<i>/at, /bones/<i>/points/<k> 또는 /bones/<i>/tip만
|
|
2473
|
+
"ops[{0}] {1} {2}: the Bones block replaces /bones/<i>/at, /bones/<i>/points/<k> or /bones/<i>/tip only (adding, removing or re-parenting bones is out of scope)": "ops[{0}] {1} {2}: 본(Bones) 블록은 /bones/<i>/at, /bones/<i>/points/<k> 또는 /bones/<i>/tip만 교체해요 (본 추가, 제거 또는 부모 변경은 범위 외)",
|
|
2469
2474
|
"ops[{0}] {1} {2}: {3}": "ops[{0}] {1} {2}: {3}",
|
|
2470
|
-
"ops[{0}] {1}: a remesh patch edits /meshes/{2} and below only (the rest of the config is what the rig was built from)": "ops[{0}] {1}: 리메시 패치는 /meshes/{2} 및 하위 경로만 편집할 수
|
|
2471
|
-
"ops[{0}] {1}: the op must name its bone entry": "ops[{0}] {1}: 작업에 대상 본 항목 이름이 지정되어야
|
|
2472
|
-
"ops[{0}] {1}: the value must be [x, y] in rig px": "ops[{0}] {1}: 값은 리그 px 단위의 [x, y]여야
|
|
2473
|
-
"ops[{0}].name must be a non-empty string naming the entry {1} holds": "ops[{0}].name은 {1}이(가) 가진 항목을 지정하는 비어 있지 않은 문자열이어야
|
|
2475
|
+
"ops[{0}] {1}: a remesh patch edits /meshes/{2} and below only (the rest of the config is what the rig was built from)": "ops[{0}] {1}: 리메시 패치는 /meshes/{2} 및 하위 경로만 편집할 수 있어요 (나머지 설정은 리그가 빌드된 기준임)",
|
|
2476
|
+
"ops[{0}] {1}: the op must name its bone entry": "ops[{0}] {1}: 작업에 대상 본 항목 이름이 지정되어야 해요",
|
|
2477
|
+
"ops[{0}] {1}: the value must be [x, y] in rig px": "ops[{0}] {1}: 값은 리그 px 단위의 [x, y]여야 해요",
|
|
2478
|
+
"ops[{0}].name must be a non-empty string naming the entry {1} holds": "ops[{0}].name은 {1}이(가) 가진 항목을 지정하는 비어 있지 않은 문자열이어야 해요",
|
|
2474
2479
|
"ops[{0}].op {1} (supported: {2})": "ops[{0}].op {1} (지원: {2})",
|
|
2475
|
-
"ops[{0}].path \"\" would replace the whole config": "ops[{0}].path \"\"는 전체 설정을 교체하게
|
|
2476
|
-
"ops[{0}].value is not JSON": "ops[{0}].value가 유효한 JSON이
|
|
2477
|
-
"ops[{0}]: {1} holds exactly {2} (and an optional name)": "ops[{0}]: {1}은(는) 정확히 {2}(및 선택적 name)만 포함해야
|
|
2480
|
+
"ops[{0}].path \"\" would replace the whole config": "ops[{0}].path \"\"는 전체 설정을 교체하게 돼요",
|
|
2481
|
+
"ops[{0}].value is not JSON": "ops[{0}].value가 유효한 JSON이 아니에요",
|
|
2482
|
+
"ops[{0}]: {1} holds exactly {2} (and an optional name)": "ops[{0}]: {1}은(는) 정확히 {2}(및 선택적 name)만 포함해야 해요",
|
|
2478
2483
|
"outward {0}°": "바깥쪽 {0}°",
|
|
2479
2484
|
"panel patch": "패널 패치",
|
|
2480
2485
|
"part model": "파츠 모델",
|
|
@@ -2482,53 +2487,53 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2482
2487
|
"patch {0} {1}": "패치 {0} {1}",
|
|
2483
2488
|
"patch {0} · assemble.patches[{1}]": "패치 {0} · assemble.patches[{1}]",
|
|
2484
2489
|
"patch {0}… ({1}; {2}{3}) with {4} {5} · {6}{7}{8}{9}{10} · model {11}…": "{4} {5}로 패치 {0}… ({1}; {2}{3}) · {6}{7}{8}{9}{10} · 모델 {11}…",
|
|
2485
|
-
"patches must hold {0}–{1} config patches": "patches에는 {0}–{1}개의 설정 패치가 포함되어야
|
|
2486
|
-
"patches[{0}] differs from patches[0] outside meshes.{1}.{2}; a strip varies the density field only": "patches[{0}]이(가) meshes.{1}.{2} 외부에서 patches[0]과
|
|
2487
|
-
"patches[{0}] names another producer or other flags than patches[0]": "patches[{0}]이(가) patches[0]과 다른 프로듀서 또는 플래그를
|
|
2488
|
-
"patches[{0}] was made against other config bytes than patches[0]": "patches[{0}]이(가) patches[0]과 다른 설정 바이트에 대해
|
|
2489
|
-
"patches[{0}]: meshes.{1}.{2} is not a number": "patches[{0}]: meshes.{1}.{2}은(는) 숫자가
|
|
2490
|
-
"patches[{0}]: the entry is not a {1} entry like patches[0]": "patches[{0}]: 항목이 patches[0]과 같은 {1} 항목이
|
|
2490
|
+
"patches must hold {0}–{1} config patches": "patches에는 {0}–{1}개의 설정 패치가 포함되어야 해요",
|
|
2491
|
+
"patches[{0}] differs from patches[0] outside meshes.{1}.{2}; a strip varies the density field only": "patches[{0}]이(가) meshes.{1}.{2} 외부에서 patches[0]과 달라요. 스트립은 밀도 필드만 변경할 수 있어요",
|
|
2492
|
+
"patches[{0}] names another producer or other flags than patches[0]": "patches[{0}]이(가) patches[0]과 다른 프로듀서 또는 플래그를 지정해요",
|
|
2493
|
+
"patches[{0}] was made against other config bytes than patches[0]": "patches[{0}]이(가) patches[0]과 다른 설정 바이트에 대해 생성됐어요",
|
|
2494
|
+
"patches[{0}]: meshes.{1}.{2} is not a number": "patches[{0}]: meshes.{1}.{2}은(는) 숫자가 아니에요",
|
|
2495
|
+
"patches[{0}]: the entry is not a {1} entry like patches[0]": "patches[{0}]: 항목이 patches[0]과 같은 {1} 항목이 아니에요",
|
|
2491
2496
|
"patches[{0}]: {1}": "patches[{0}]: {1}",
|
|
2492
|
-
"patches[{0}]: {1} {2} is already in the strip": "patches[{0}]: {1} {2}은(는) 이미 스트립에
|
|
2497
|
+
"patches[{0}]: {1} {2} is already in the strip": "patches[{0}]: {1} {2}은(는) 이미 스트립에 있어요",
|
|
2493
2498
|
"period (divisors of the idle)": "주기 (아이들 길이의 약수)",
|
|
2494
2499
|
"physics and idle edits (retune) refuse {0} (RETUNE_INPUT_WRITTEN){1}": "물리 및 아이들 편집(retune)이 {0}에서 거부됨 (RETUNE_INPUT_WRITTEN){1}",
|
|
2495
2500
|
"physics and idle edits (retune) refuse: {0}": "물리 및 아이들 편집(retune) 거부됨: {0}",
|
|
2496
|
-
"physics and idle edits Apply through retune, which carries every inspected mesh over": "물리 및 아이들 편집은 점검 중인 모든 메시를 그대로 유지하는 retune을 통해
|
|
2497
|
-
"physics and idle edits rebuild the whole rig on {0} (retune is {1}+), so they refuse too": "{0}에서는 물리 및 아이들 편집이 전체 리그를 다시 빌드하므로(retune은 {1}+부터 지원) 함께
|
|
2501
|
+
"physics and idle edits Apply through retune, which carries every inspected mesh over": "물리 및 아이들 편집은 점검 중인 모든 메시를 그대로 유지하는 retune을 통해 적용돼요",
|
|
2502
|
+
"physics and idle edits rebuild the whole rig on {0} (retune is {1}+), so they refuse too": "{0}에서는 물리 및 아이들 편집이 전체 리그를 다시 빌드하므로(retune은 {1}+부터 지원) 함께 거부돼요",
|
|
2498
2503
|
"pick the subject": "대상을 선택하세요",
|
|
2499
2504
|
"plant feet": "발 고정(plant feet)",
|
|
2500
2505
|
"point ": "포인트 ",
|
|
2501
2506
|
"positive ": "양의 ",
|
|
2502
2507
|
"preference patch": "환경설정 패치",
|
|
2503
|
-
"preview only — the producer retriangulates": "미리보기 전용 — 프로듀서가
|
|
2508
|
+
"preview only — the producer retriangulates": "미리보기 전용 — 프로듀서가 재삼각분할해요",
|
|
2504
2509
|
"preview — Apply decides": "미리보기 — 적용 시 확정됨",
|
|
2505
2510
|
"preview — Apply decides ({0} op(s){1})": "미리보기 — 적용 시 확정됨 (작업 {0}개{1})",
|
|
2506
2511
|
"preview — Apply decides · {0}": "미리보기 — 적용 시 확정됨 · {0}",
|
|
2507
|
-
"producer must be exactly {name, version}": "producer는 정확히 {name, version}이어야
|
|
2508
|
-
"producer must be {name, version}": "producer는 {name, version}이어야
|
|
2512
|
+
"producer must be exactly {name, version}": "producer는 정확히 {name, version}이어야 해요",
|
|
2513
|
+
"producer must be {name, version}": "producer는 {name, version}이어야 해요",
|
|
2509
2514
|
"property ": "속성 ",
|
|
2510
2515
|
"propose --from-config: LINT and coverage lines": "propose --from-config: LINT 및 커버리지 라인",
|
|
2511
2516
|
"propose {0} (wrote a config differing at {1} path(s)) + ": "propose {0} (경로 {1}개가 다른 설정 기록) + ",
|
|
2512
2517
|
"raised by head": "머리 기준 들어올림(raised by head)",
|
|
2513
2518
|
"rate unknown": "프레임 레이트 알 수 없음",
|
|
2514
|
-
"readings must hold 1–{0} entries": "readings에는 1–{0}개의 항목이 포함되어야
|
|
2519
|
+
"readings must hold 1–{0} entries": "readings에는 1–{0}개의 항목이 포함되어야 해요",
|
|
2515
2520
|
"readings request": "측정 요청",
|
|
2516
|
-
"readings: one entry named twice": "readings: 동일한 항목이 두 번
|
|
2521
|
+
"readings: one entry named twice": "readings: 동일한 항목이 두 번 지정됐어요",
|
|
2517
2522
|
"recipe declared": "레시피 선언됨",
|
|
2518
2523
|
"recomposite_error_rig.png · sha256 {0}…": "recomposite_error_rig.png · sha256 {0}…",
|
|
2519
2524
|
"record {0} (model {1}…)": "레코드 {0} (모델 {1}…)",
|
|
2520
2525
|
"reference could not render": "레퍼런스를 렌더링할 수 없음",
|
|
2521
2526
|
"reference video could not be decoded": "레퍼런스 비디오를 디코딩할 수 없음",
|
|
2522
|
-
"reference: expected local mp4, mov or webm file": "reference: 로컬 mp4, mov 또는 webm 파일이
|
|
2523
|
-
"reference: expected regular local video": "reference: 일반 로컬 비디오 파일이
|
|
2524
|
-
"reference: no explicit video selected": "reference: 명시적으로 선택된 비디오가
|
|
2525
|
-
"reference: originally selected canonical regular file unavailable (no symlink replacement)": "reference: 처음 선택된 정규 일반 파일을 사용할 수
|
|
2526
|
-
"reference: selected reference id collides with package reference": "reference: 선택된 레퍼런스 ID가 패키지 레퍼런스와
|
|
2527
|
-
"regions must hold 1–{0} entries": "regions에는 1–{0}개의 항목이 포함되어야
|
|
2527
|
+
"reference: expected local mp4, mov or webm file": "reference: 로컬 mp4, mov 또는 webm 파일이 필요해요",
|
|
2528
|
+
"reference: expected regular local video": "reference: 일반 로컬 비디오 파일이 필요해요",
|
|
2529
|
+
"reference: no explicit video selected": "reference: 명시적으로 선택된 비디오가 없어요",
|
|
2530
|
+
"reference: originally selected canonical regular file unavailable (no symlink replacement)": "reference: 처음 선택된 정규 일반 파일을 사용할 수 없어요(심볼릭 링크 교체 불가)",
|
|
2531
|
+
"reference: selected reference id collides with package reference": "reference: 선택된 레퍼런스 ID가 패키지 레퍼런스와 충돌해요",
|
|
2532
|
+
"regions must hold 1–{0} entries": "regions에는 1–{0}개의 항목이 포함되어야 해요",
|
|
2528
2533
|
"regions on {0} with {1} {2} · model {3}…": "{1} {2}로 {0}의 영역 · 모델 {3}…",
|
|
2529
2534
|
"regions.{0} bone": "regions.{0} 본",
|
|
2530
|
-
"regions.{0} is not a bone name": "regions.{0}은(는) 본 이름이
|
|
2531
|
-
"regions.{0} must name a bone": "regions.{0}에는 본 이름을 지정해야
|
|
2535
|
+
"regions.{0} is not a bone name": "regions.{0}은(는) 본 이름이 아니에요",
|
|
2536
|
+
"regions.{0} must name a bone": "regions.{0}에는 본 이름을 지정해야 해요",
|
|
2532
2537
|
"regions: duplicate names": "regions: 중복된 이름",
|
|
2533
2538
|
"regular file": "일반 파일",
|
|
2534
2539
|
"relative bone": "기준 본",
|
|
@@ -2538,18 +2543,18 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2538
2543
|
"removed: config.motion.tracks[{0}] {1}": "제거됨: config.motion.tracks[{0}] {1}",
|
|
2539
2544
|
"removes a missing edge {0}-{1}": "존재하지 않는 엣지 {0}-{1} 제거 시도",
|
|
2540
2545
|
"removes hull edge {0}-{1}": "헐(hull) 엣지 {0}-{1} 제거 시도",
|
|
2541
|
-
"removes triangulation edge {0}-{1}; only a constraint edge this delta added can be removed": "삼각분할 엣지 {0}-{1} 제거 시도; 이 델타에서 추가한 제약 엣지만 제거할 수
|
|
2546
|
+
"removes triangulation edge {0}-{1}; only a constraint edge this delta added can be removed": "삼각분할 엣지 {0}-{1} 제거 시도; 이 델타에서 추가한 제약 엣지만 제거할 수 있어요",
|
|
2542
2547
|
"removes vertex {0}, an end of constraint edge {1}-{2}; unedge it first": "제약 엣지 {1}-{2}의 끝점인 정점 {0} 제거 시도; 먼저 해당 엣지를 제거하세요",
|
|
2543
2548
|
"replace {0}": "{0} 교체",
|
|
2544
2549
|
"requestVideoFrameCallback · Actual mediaTime": "requestVideoFrameCallback · 실제 mediaTime",
|
|
2545
|
-
"requested time is outside video duration": "요청된 시간이 비디오 길이를
|
|
2550
|
+
"requested time is outside video duration": "요청된 시간이 비디오 길이를 벗어났어요",
|
|
2546
2551
|
"requirements check {0}": "요구사항 검사 {0}",
|
|
2547
|
-
"requirements must hold 1 to {0} entries": "requirements에는 1–{0}개의 항목이 포함되어야
|
|
2552
|
+
"requirements must hold 1 to {0} entries": "requirements에는 1–{0}개의 항목이 포함되어야 해요",
|
|
2548
2553
|
"requirements: ": "요구사항: ",
|
|
2549
|
-
"requirements[{0}] key {1} is not a field name": "requirements[{0}] 키 {1}은(는) 필드 이름이
|
|
2550
|
-
"requirements[{0}] must be an object of at most 12 fields": "requirements[{0}]은(는) 최대 12개 필드를 가진 객체여야
|
|
2551
|
-
"requirements[{0}].may_fold: waivers are not written by review": "requirements[{0}].may_fold: 리뷰는 예외(waiver)를 기록하지
|
|
2552
|
-
"requirements[{0}].{1} must be a name, a finite number or a target": "requirements[{0}].{1}은(는) 이름, 유한한 숫자 또는 대상이어야
|
|
2554
|
+
"requirements[{0}] key {1} is not a field name": "requirements[{0}] 키 {1}은(는) 필드 이름이 아니에요",
|
|
2555
|
+
"requirements[{0}] must be an object of at most 12 fields": "requirements[{0}]은(는) 최대 12개 필드를 가진 객체여야 해요",
|
|
2556
|
+
"requirements[{0}].may_fold: waivers are not written by review": "requirements[{0}].may_fold: 리뷰는 예외(waiver)를 기록하지 않아요",
|
|
2557
|
+
"requirements[{0}].{1} must be a name, a finite number or a target": "requirements[{0}].{1}은(는) 이름, 유한한 숫자 또는 대상이어야 해요",
|
|
2553
2558
|
"restored {0} draft op": "초안 작업 {0}개 복원됨",
|
|
2554
2559
|
"restored {0} draft ops": "초안 작업 {0}개 복원됨",
|
|
2555
2560
|
"retarget \"{0}\"": "리타겟 \"{0}\"",
|
|
@@ -2559,14 +2564,14 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2559
2564
|
"reused the scratch build of this exact patch · ": "이 패치와 정확히 일치하는 임시 빌드를 재사용함 · ",
|
|
2560
2565
|
"reused the scratch build of this exact retarget": "이 리타겟과 정확히 일치하는 임시 빌드를 재사용함",
|
|
2561
2566
|
"review: against the inspected rig — {0}": "리뷰: 점검 중인 리그 대비 — {0}",
|
|
2562
|
-
"review: check not run again — {0} carries {1}'s check of this revision, bound to it by {2} revision hash row(s): {3}": "리뷰: 검사를 다시 실행하지 않음 — {0}에 리비전 해시 {2}개 행({3})으로 바인딩된 이 리비전의 {1} 검사 결과가 포함되어
|
|
2563
|
-
"review: clean skipped — the sequence goes to retarget as the package holds it": "리뷰: 정리(clean) 건너뜀 — 패키지에 보관된 시퀀스 그대로 리타겟에
|
|
2567
|
+
"review: check not run again — {0} carries {1}'s check of this revision, bound to it by {2} revision hash row(s): {3}": "리뷰: 검사를 다시 실행하지 않음 — {0}에 리비전 해시 {2}개 행({3})으로 바인딩된 이 리비전의 {1} 검사 결과가 포함되어 있어요",
|
|
2568
|
+
"review: clean skipped — the sequence goes to retarget as the package holds it": "리뷰: 정리(clean) 건너뜀 — 패키지에 보관된 시퀀스 그대로 리타겟에 전달돼요",
|
|
2564
2569
|
"review: images changed: {0}{1}": "리뷰: 변경된 이미지: {0}{1}",
|
|
2565
2570
|
"review: motion.json holds {0} animation(s), \"{1}\" added{2}": "리뷰: motion.json에 애니메이션 {0}개 포함, \"{1}\" 추가됨{2}",
|
|
2566
2571
|
"review: remesh.json {0}: v {1} t {2} → v {3} t {4}": "리뷰: remesh.json {0}: 정점 {1} 삼각형 {2} → 정점 {3} 삼각형 {4}",
|
|
2567
|
-
"review: the written config differs from cloth.json at {0} path(s), every one under the sections propose splices{1}": "리뷰: 기록된 설정이 propose가 병합하는 섹션 아래의 경로 {0}개에서 cloth.json과
|
|
2572
|
+
"review: the written config differs from cloth.json at {0} path(s), every one under the sections propose splices{1}": "리뷰: 기록된 설정이 propose가 병합하는 섹션 아래의 경로 {0}개에서 cloth.json과 달라요{1}",
|
|
2568
2573
|
"review: {0}": "리뷰: {0}",
|
|
2569
|
-
"review: {0} carries no check line or block statuses (@rig-c/parts before {1}), so check runs on the revision": "리뷰: {0}에 검사 줄이나 블록 상태가 없어({1} 이전의 @rig-c/parts) 리비전에 대해 검사를
|
|
2574
|
+
"review: {0} carries no check line or block statuses (@rig-c/parts before {1}), so check runs on the revision": "리뷰: {0}에 검사 줄이나 블록 상태가 없어({1} 이전의 @rig-c/parts) 리비전에 대해 검사를 실행해요",
|
|
2570
2575
|
"review: {0} {1} build --config config.json ({2}) --source <handoff source> --full <handoff full>{3} --seam-pairs{4} → scratch out (assemble → rig → check)": "리뷰: {0} {1} build --config config.json ({2}) --source <핸드오프 소스> --full <핸드오프 전체>{3} --seam-pairs{4} → 임시 출력 (assemble → rig → check)",
|
|
2571
2576
|
"review: {0} {1} build --profile rig-play --pack --page-edges {2} --pack-shape {3}{4}": "리뷰: {0} {1} build --profile rig-play --pack --page-edges {2} --pack-shape {3}{4}",
|
|
2572
2577
|
"review: {0} {1} check --rig {2} --out check --parts <handoff parts>{3}": "리뷰: {0} {1} check --rig {2} --out check --parts <핸드오프 파츠>{3}",
|
|
@@ -2580,7 +2585,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2580
2585
|
"review: {0} {1} rig --config config.json (the handoff config with {2} patch op(s)) → scratch rig": "리뷰: {0} {1} rig --config config.json (패치 작업 {2}개가 적용된 핸드오프 설정) → 임시 리그",
|
|
2581
2586
|
"review: {0} {1} rig --config config.json ({2} animation op(s) on {3}; {4} {5}… → {6}…) → scratch rig": "리뷰: {0} {1} rig --config config.json ({3}에 애니메이션 작업 {2}개; {4} {5}… → {6}…) → 임시 리그",
|
|
2582
2587
|
"review: {0} {1} {2}": "리뷰: {0} {1} {2}",
|
|
2583
|
-
"review: {0}'s own check read the default world and this Apply checks under the exported schedule, so check runs on the revision": "리뷰: {0} 자체 검사는 기본 월드를 읽었으며 이번 적용은 내보낸 스케줄 기준으로 검사하므로 리비전에 대해 검사를
|
|
2588
|
+
"review: {0}'s own check read the default world and this Apply checks under the exported schedule, so check runs on the revision": "리뷰: {0} 자체 검사는 기본 월드를 읽었으며 이번 적용은 내보낸 스케줄 기준으로 검사하므로 리비전에 대해 검사를 실행해요",
|
|
2584
2589
|
"review: {0}: {1}{2}": "리뷰: {0}: {1}{2}",
|
|
2585
2590
|
"ribs stations": "리브(ribs) 스테이션 수",
|
|
2586
2591
|
"ribs: a row of vertices across the part at each link origin and at stations points between (a chain the segments name; contour mode)": "리브(ribs): 각 링크 원점과 그 사이 스테이션 지점마다 파츠를 가로지르는 정점 행 (세그먼트가 지정한 체인; 윤곽 모드)",
|
|
@@ -2588,7 +2593,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2588
2593
|
"rig --config": "rig --config",
|
|
2589
2594
|
"rig --config, check": "rig --config, 검사",
|
|
2590
2595
|
"rig SHA-256": "리그 SHA-256",
|
|
2591
|
-
"rig must be {path, sha256}": "rig는 {path, sha256}이어야
|
|
2596
|
+
"rig must be {path, sha256}": "rig는 {path, sha256}이어야 해요",
|
|
2592
2597
|
"rig review": "리그 리뷰",
|
|
2593
2598
|
"rig review compare": "리그 리뷰 비교",
|
|
2594
2599
|
"rig review · compare": "리그 리뷰 · 비교",
|
|
@@ -2603,15 +2608,15 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2603
2608
|
"rig-parts propose exited {0}": "rig-parts propose가 종료 코드 {0}(으)로 종료됨",
|
|
2604
2609
|
"rig-parts propose exited {0} without a named refusal": "rig-parts propose가 지정된 거부 사유 없이 종료 코드 {0}(으)로 종료됨",
|
|
2605
2610
|
"rig-parts rig --config config.json": "rig-parts rig --config config.json",
|
|
2606
|
-
"rig-pose-sequence/1: each person needs a unique id and joints": "rig-pose-sequence/1: 각 인물에는 고유 ID와 관절이
|
|
2607
|
-
"rig-pose-sequence/1: expected picture-px, top-left, y-down and nonempty frames": "rig-pose-sequence/1: picture-px, top-left, y-down 및 비어 있지 않은 프레임이
|
|
2608
|
-
"rig-pose-sequence/1: frame times must strictly increase": "rig-pose-sequence/1: 프레임 시간은 순증가해야
|
|
2609
|
-
"rig-pose-sequence/1: located joints require finite at[x,y]": "rig-pose-sequence/1: 위치가 지정된 관절에는 유한한 at[x,y]가
|
|
2610
|
-
"rig-pose-sequence/1: score must be finite": "rig-pose-sequence/1: 점수는 유한한 값이어야
|
|
2611
|
+
"rig-pose-sequence/1: each person needs a unique id and joints": "rig-pose-sequence/1: 각 인물에는 고유 ID와 관절이 필요해요",
|
|
2612
|
+
"rig-pose-sequence/1: expected picture-px, top-left, y-down and nonempty frames": "rig-pose-sequence/1: picture-px, top-left, y-down 및 비어 있지 않은 프레임이 필요해요",
|
|
2613
|
+
"rig-pose-sequence/1: frame times must strictly increase": "rig-pose-sequence/1: 프레임 시간은 순증가해야 해요",
|
|
2614
|
+
"rig-pose-sequence/1: located joints require finite at[x,y]": "rig-pose-sequence/1: 위치가 지정된 관절에는 유한한 at[x,y]가 필요해요",
|
|
2615
|
+
"rig-pose-sequence/1: score must be finite": "rig-pose-sequence/1: 점수는 유한한 값이어야 해요",
|
|
2611
2616
|
"rig-pose-sequence/1: unknown joint state": "rig-pose-sequence/1: 알 수 없는 관절 상태",
|
|
2612
2617
|
"rig-review-pose/1 with image-pixels-y-down coordinates": "image-pixels-y-down 좌표를 사용하는 rig-review-pose/1",
|
|
2613
|
-
"rig.json declares invariants.idleDrivesMeshes (rig --idle-keys direct)": "rig.json에 invariants.idleDrivesMeshes가 선언되어
|
|
2614
|
-
"rig.json declares no invariants.idleDrivesMeshes, so the rig was built under --idle-keys ctl (the producer's default; a rig with no mesh-bound keyed bone is the same under both){0}": "rig.json에 invariants.idleDrivesMeshes가 선언되어 있지 않으므로 리그가 --idle-keys ctl(프로듀서 기본값; 메시에 바인딩된 키 본이 없는 리그는 두 방식에서 동일함)로
|
|
2618
|
+
"rig.json declares invariants.idleDrivesMeshes (rig --idle-keys direct)": "rig.json에 invariants.idleDrivesMeshes가 선언되어 있어요 (rig --idle-keys direct)",
|
|
2619
|
+
"rig.json declares no invariants.idleDrivesMeshes, so the rig was built under --idle-keys ctl (the producer's default; a rig with no mesh-bound keyed bone is the same under both){0}": "rig.json에 invariants.idleDrivesMeshes가 선언되어 있지 않으므로 리그가 --idle-keys ctl(프로듀서 기본값; 메시에 바인딩된 키 본이 없는 리그는 두 방식에서 동일함)로 빌드됐어요{0}",
|
|
2615
2620
|
"rig.json differs at {0} path(s)": "rig.json 경로 {0}개 차이",
|
|
2616
2621
|
"rig.json {0}": "rig.json {0}",
|
|
2617
2622
|
"rigc build exited {0} without a named refusal": "rigc build가 지정된 거부 사유 없이 종료 코드 {0}(으)로 종료됨",
|
|
@@ -2626,127 +2631,127 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2626
2631
|
"sampled at {0} fps over {1} s (held between frames, within {2} of the panel)": "{1}초 동안 {0} fps로 샘플링됨 (프레임 사이 유지, 패널 값과 {2} 이내)",
|
|
2627
2632
|
"scale rig point {0}": "스케일 리그 포인트 {0}",
|
|
2628
2633
|
"scale {0} =": "스케일 {0} =",
|
|
2629
|
-
"schema must be {0}": "schema는 {0}이어야
|
|
2634
|
+
"schema must be {0}": "schema는 {0}이어야 해요",
|
|
2630
2635
|
"scratch build": "임시 빌드",
|
|
2631
2636
|
"scratch · folds: no scratch build yet (Apply builds one)": "임시 빌드 · 접힘(folds): 아직 임시 빌드 없음 (적용 시 빌드 생성)",
|
|
2632
2637
|
"seam {0} | {1}": "심(seam) {0} | {1}",
|
|
2633
2638
|
"seam {0}:{1}": "심(seam) {0}:{1}",
|
|
2634
2639
|
"select a numeric stored channel": "저장된 수치 채널을 선택하세요",
|
|
2635
2640
|
"select one mesh slot in the parts list": "파츠 목록에서 메시 슬롯을 하나 선택하세요",
|
|
2636
|
-
"select one slot in the parts list; whole-rig mesh edit is not a thing": "파츠 목록에서 슬롯을 하나 선택하세요. 전체 리그 메시 편집은 지원되지
|
|
2641
|
+
"select one slot in the parts list; whole-rig mesh edit is not a thing": "파츠 목록에서 슬롯을 하나 선택하세요. 전체 리그 메시 편집은 지원되지 않아요",
|
|
2637
2642
|
"semi-axis x": "반축 x",
|
|
2638
2643
|
"semi-axis y": "반축 y",
|
|
2639
|
-
"sequence must be a declared pose reference id": "sequence는 선언된 포즈 레퍼런스 ID여야
|
|
2640
|
-
"sequence must be {reference, path, sha256}": "sequence는 {reference, path, sha256}이어야
|
|
2644
|
+
"sequence must be a declared pose reference id": "sequence는 선언된 포즈 레퍼런스 ID여야 해요",
|
|
2645
|
+
"sequence must be {reference, path, sha256}": "sequence는 {reference, path, sha256}이어야 해요",
|
|
2641
2646
|
"session.checkpoints: unknown checkpoint {0}": "session.checkpoints: 알 수 없는 체크포인트 {0}",
|
|
2642
|
-
"session.corrections: authoring proposals are not accepted; use read-only structured feedback": "session.corrections: 직접 제작(authoring) 제안은 허용되지
|
|
2643
|
-
"session.feedback: expected array <= 1000": "session.feedback: 1000개 이하의 배열이
|
|
2644
|
-
"session.reviewedSource: does not match exact rig/motion hashes and tool versions of loaded package": "session.reviewedSource: 로드된 패키지의 정확한 리그/모션 해시 및 도구 버전과 일치하지
|
|
2645
|
-
"session.{0}: does not match loaded package": "session.{0}: 로드된 패키지와 일치하지
|
|
2646
|
-
"setup-pose crop px of the rig canvas, x right, y down; vertex ids are source indices, added vertices take the next id in op order, removed ids are not reused": "리그 캔버스의 셋업 포즈 크롭 px (오른쪽이 +x, 아래쪽이 +y); 정점 ID는 원본 인덱스이며 추가된 정점은 작업 순서대로 다음 ID를 부여받고 제거된 ID는 재사용되지
|
|
2647
|
-
"sha256 is not the sha256 of text": "sha256이 텍스트의 sha256 해시와 일치하지
|
|
2647
|
+
"session.corrections: authoring proposals are not accepted; use read-only structured feedback": "session.corrections: 직접 제작(authoring) 제안은 허용되지 않아요. 읽기 전용 구조화 피드백을 사용하세요",
|
|
2648
|
+
"session.feedback: expected array <= 1000": "session.feedback: 1000개 이하의 배열이 필요해요",
|
|
2649
|
+
"session.reviewedSource: does not match exact rig/motion hashes and tool versions of loaded package": "session.reviewedSource: 로드된 패키지의 정확한 리그/모션 해시 및 도구 버전과 일치하지 않아요",
|
|
2650
|
+
"session.{0}: does not match loaded package": "session.{0}: 로드된 패키지와 일치하지 않아요",
|
|
2651
|
+
"setup-pose crop px of the rig canvas, x right, y down; vertex ids are source indices, added vertices take the next id in op order, removed ids are not reused": "리그 캔버스의 셋업 포즈 크롭 px (오른쪽이 +x, 아래쪽이 +y); 정점 ID는 원본 인덱스이며 추가된 정점은 작업 순서대로 다음 ID를 부여받고 제거된 ID는 재사용되지 않아요",
|
|
2652
|
+
"sha256 is not the sha256 of text": "sha256이 텍스트의 sha256 해시와 일치하지 않아요",
|
|
2648
2653
|
"short fraction": "단축 비율(short fraction)",
|
|
2649
2654
|
"silhouette": "실루엣",
|
|
2650
|
-
"size is not the byte length of text": "size가 텍스트의 바이트 길이와 일치하지
|
|
2655
|
+
"size is not the byte length of text": "size가 텍스트의 바이트 길이와 일치하지 않아요",
|
|
2651
2656
|
"skin {0}": "스킨 {0}",
|
|
2652
2657
|
"slot": "슬롯",
|
|
2653
2658
|
"slot attachments": "슬롯 어태치먼트",
|
|
2654
2659
|
"slot {0}": "슬롯 {0}",
|
|
2655
2660
|
"source binding": "소스 바인딩",
|
|
2656
|
-
"source binding differs": "소스 바인딩이
|
|
2661
|
+
"source binding differs": "소스 바인딩이 달라요",
|
|
2657
2662
|
"source hash": "소스 해시",
|
|
2658
|
-
"source hash differs": "소스 해시가
|
|
2663
|
+
"source hash differs": "소스 해시가 달라요",
|
|
2659
2664
|
"source {0}": "소스 {0}",
|
|
2660
2665
|
"span {0}° ({1}° at F{2}, {3}° at F{4})": "범위 {0}° (F{2}에서 {1}°, F{4}에서 {3}°)",
|
|
2661
|
-
"spec must be {0}": "spec은 {0}이어야
|
|
2666
|
+
"spec must be {0}": "spec은 {0}이어야 해요",
|
|
2662
2667
|
"split at": "분할 지점(split at)",
|
|
2663
2668
|
"split into": "분할 개수(split into)",
|
|
2664
2669
|
"splits a missing edge {0}-{1}": "존재하지 않는 엣지 {0}-{1} 분할 시도",
|
|
2665
|
-
"stage record is not a schema-tagged object": "스테이지 레코드가 스키마 태그가 지정된 객체가
|
|
2670
|
+
"stage record is not a schema-tagged object": "스테이지 레코드가 스키마 태그가 지정된 객체가 아니에요",
|
|
2666
2671
|
"stance leg lengths": "스탠스 다리 길이",
|
|
2667
2672
|
"standing wind [{0}] · gravity [{1}]": "기본 바람 [{0}] · 중력 [{1}]",
|
|
2668
2673
|
"start ": "시작 ",
|
|
2669
2674
|
"step form (exact)": "계단 형식 (정확함)",
|
|
2670
|
-
"steps must hold 1–{0} entries": "steps에는 1–{0}개의 항목이 포함되어야
|
|
2671
|
-
"steps[{0}] holds only t, wind, gravity": "steps[{0}]은(는) t, wind, gravity만 포함할 수
|
|
2672
|
-
"steps[{0}] states neither wind nor gravity": "steps[{0}]에 wind와 gravity가 모두 지정되어 있지
|
|
2673
|
-
"steps[{0}].t must be seconds in [0, 3600]": "steps[{0}].t는 [0, 3600] 범위의 초여야
|
|
2674
|
-
"steps[{0}].t must come after steps[{1}].t": "steps[{0}].t는 steps[{1}].t 이후여야
|
|
2675
|
+
"steps must hold 1–{0} entries": "steps에는 1–{0}개의 항목이 포함되어야 해요",
|
|
2676
|
+
"steps[{0}] holds only t, wind, gravity": "steps[{0}]은(는) t, wind, gravity만 포함할 수 있어요",
|
|
2677
|
+
"steps[{0}] states neither wind nor gravity": "steps[{0}]에 wind와 gravity가 모두 지정되어 있지 않아요",
|
|
2678
|
+
"steps[{0}].t must be seconds in [0, 3600]": "steps[{0}].t는 [0, 3600] 범위의 초여야 해요",
|
|
2679
|
+
"steps[{0}].t must come after steps[{1}].t": "steps[{0}].t는 steps[{1}].t 이후여야 해요",
|
|
2675
2680
|
"stops[{0}] inward": "stops[{0}] 안쪽",
|
|
2676
|
-
"stops[{0}] is not {chain, against, at, inward, outward}": "stops[{0}]이(가) {chain, against, at, inward, outward} 형식이
|
|
2681
|
+
"stops[{0}] is not {chain, against, at, inward, outward}": "stops[{0}]이(가) {chain, against, at, inward, outward} 형식이 아니에요",
|
|
2677
2682
|
"stops[{0}] outward": "stops[{0}] 바깥쪽",
|
|
2678
2683
|
"stops[{0}] {1} against {2}": "stops[{0}] {1} ({2} 기준)",
|
|
2679
|
-
"stops[{0}].{1} must be a finite number": "stops[{0}].{1}은(는) 유한한 숫자여야
|
|
2684
|
+
"stops[{0}].{1} must be a finite number": "stops[{0}].{1}은(는) 유한한 숫자여야 해요",
|
|
2680
2685
|
"strength branch": "가지 강도(strength branch)",
|
|
2681
2686
|
"strength edge": "가장자리 강도(strength edge)",
|
|
2682
2687
|
"strength trunk": "줄기 강도(strength trunk)",
|
|
2683
2688
|
"strictly increasing times in seconds": "초 단위의 순증가 시간",
|
|
2684
|
-
"strip.format: expected png | json": "strip.format: png | json이어야
|
|
2685
|
-
"strip.frameEnd: {0} beyond report last frame {1}": "strip.frameEnd: {0}이(가) 리포트 마지막 프레임({1})을
|
|
2686
|
-
"strip.intervals: expected 1…64 inclusive intervals": "strip.intervals: 1…64개의 양끝 포함 구간이
|
|
2687
|
-
"strip.intervals: export exceeds 256 total frames; split the selection": "strip.intervals: 내보내기가 총 256프레임을
|
|
2688
|
-
"strip.layout: export exceeds 64 megapixels or 16384 pixels; split the selection": "strip.layout: 내보내기가 64메가픽셀 또는 16384픽셀을
|
|
2689
|
+
"strip.format: expected png | json": "strip.format: png | json이어야 해요",
|
|
2690
|
+
"strip.frameEnd: {0} beyond report last frame {1}": "strip.frameEnd: {0}이(가) 리포트 마지막 프레임({1})을 초과해요",
|
|
2691
|
+
"strip.intervals: expected 1…64 inclusive intervals": "strip.intervals: 1…64개의 양끝 포함 구간이 필요해요",
|
|
2692
|
+
"strip.intervals: export exceeds 256 total frames; split the selection": "strip.intervals: 내보내기가 총 256프레임을 초과해요. 선택 범위를 나누세요",
|
|
2693
|
+
"strip.layout: export exceeds 64 megapixels or 16384 pixels; split the selection": "strip.layout: 내보내기가 64메가픽셀 또는 16384픽셀을 초과해요. 선택 범위를 나누세요",
|
|
2689
2694
|
"swing scales": "스윙 배율(swing scales)",
|
|
2690
2695
|
"t ": "t ",
|
|
2691
|
-
"text does not parse as JSON": "텍스트를 JSON으로 파싱할 수
|
|
2692
|
-
"text is not a {0} schedule ({1})": "텍스트가 {0} 스케줄이
|
|
2693
|
-
"text must be a {0} file of spec, fps and requirements": "텍스트는 spec, fps 및 requirements를 포함한 {0} 파일이어야
|
|
2694
|
-
"text must be the exported schedule, at most 128 KiB": "텍스트는 내보낸 스케줄이어야
|
|
2695
|
-
"text must be the file's text, at most {0} characters": "텍스트는 파일 내용이어야
|
|
2696
|
-
"the Fields block writes /regions/<part>, /motion/blink/still/<part>, /stops/<i>, /bones/<i>/inherit (link_inherit), /turn/pivot and /turn/depths/<part> only (turn.deform is out of scope)": "필드 블록은 /regions/<part>, /motion/blink/still/<part>, /stops/<i>, /bones/<i>/inherit (link_inherit), /turn/pivot 및 /turn/depths/<part>만
|
|
2697
|
-
"the animation operations leave animations_from byte-identical; nothing to apply": "애니메이션 작업 후에도 animations_from이 바이트 단위로 동일하여 적용할 변경사항이
|
|
2698
|
-
"the animations_from file changed since the editor read it; reload": "편집기가 읽은 이후 animations_from 파일이
|
|
2696
|
+
"text does not parse as JSON": "텍스트를 JSON으로 파싱할 수 없어요",
|
|
2697
|
+
"text is not a {0} schedule ({1})": "텍스트가 {0} 스케줄이 아니에요 ({1})",
|
|
2698
|
+
"text must be a {0} file of spec, fps and requirements": "텍스트는 spec, fps 및 requirements를 포함한 {0} 파일이어야 해요",
|
|
2699
|
+
"text must be the exported schedule, at most 128 KiB": "텍스트는 내보낸 스케줄이어야 해요(최대 128 KiB)",
|
|
2700
|
+
"text must be the file's text, at most {0} characters": "텍스트는 파일 내용이어야 해요(최대 {0}자)",
|
|
2701
|
+
"the Fields block writes /regions/<part>, /motion/blink/still/<part>, /stops/<i>, /bones/<i>/inherit (link_inherit), /turn/pivot and /turn/depths/<part> only (turn.deform is out of scope)": "필드 블록은 /regions/<part>, /motion/blink/still/<part>, /stops/<i>, /bones/<i>/inherit (link_inherit), /turn/pivot 및 /turn/depths/<part>만 기록해요 (turn.deform은 범위 외)",
|
|
2702
|
+
"the animation operations leave animations_from byte-identical; nothing to apply": "애니메이션 작업 후에도 animations_from이 바이트 단위로 동일하여 적용할 변경사항이 없어요",
|
|
2703
|
+
"the animations_from file changed since the editor read it; reload": "편집기가 읽은 이후 animations_from 파일이 변경됐어요. 새로고침하세요",
|
|
2699
2704
|
"the background interior spacing, px, above 0": "배경 내부 간격(px, 0보다 큼)",
|
|
2700
|
-
"the compiled scratch model is not rigc-compiled/3 with pages": "컴파일된 임시 모델이 pages를 포함한 rigc-compiled/3가
|
|
2701
|
-
"the config changes {0}, which retune holds (RETUNE_REQUEST_HELD)": "설정이 retune에서 고정하는 {0}을(를)
|
|
2702
|
-
"the config draws {0} differently and retune holds every image (RETUNE_REQUEST_HELD)": "설정이 {0}을(를) 다르게 그리며 retune은 모든 이미지를
|
|
2703
|
-
"the config moves a bone, so every part is refused (REMESH_BASELINE_MISMATCH)": "설정이 본을 이동시키므로 모든 파츠가
|
|
2705
|
+
"the compiled scratch model is not rigc-compiled/3 with pages": "컴파일된 임시 모델이 pages를 포함한 rigc-compiled/3가 아니에요",
|
|
2706
|
+
"the config changes {0}, which retune holds (RETUNE_REQUEST_HELD)": "설정이 retune에서 고정하는 {0}을(를) 변경해요 (RETUNE_REQUEST_HELD)",
|
|
2707
|
+
"the config draws {0} differently and retune holds every image (RETUNE_REQUEST_HELD)": "설정이 {0}을(를) 다르게 그리며 retune은 모든 이미지를 고정해요 (RETUNE_REQUEST_HELD)",
|
|
2708
|
+
"the config moves a bone, so every part is refused (REMESH_BASELINE_MISMATCH)": "설정이 본을 이동시키므로 모든 파츠가 거부돼요 (REMESH_BASELINE_MISMATCH)",
|
|
2704
2709
|
"the config propose wrote": "propose가 기록한 설정",
|
|
2705
|
-
"the config states no bones[{0}]": "설정에 bones[{0}]이(가) 선언되어 있지
|
|
2706
|
-
"the config states no motion.blink; a still row belongs to the blink": "설정에 motion.blink가 선언되어 있지
|
|
2707
|
-
"the config states no stops[{0}]": "설정에 stops[{0}]이(가) 선언되어 있지
|
|
2708
|
-
"the config states no turn": "설정에 turn이 선언되어 있지
|
|
2709
|
-
"the dial must be a finite number": "다이얼 값은 유한한 숫자여야
|
|
2710
|
-
"the drawn root bone is at ({0}, {1}), not the world origin": "그려진 루트 본이 월드 원점이 아닌 ({0}, {1})에
|
|
2711
|
-
"the entry is not a contour; contour.bust applies to contour meshes only": "항목이 윤곽(contour) 모드가
|
|
2712
|
-
"the handoff config is not an object": "핸드오프 설정이 객체가
|
|
2713
|
-
"the handoff config states no motion": "핸드오프 설정에 motion이 선언되어 있지
|
|
2710
|
+
"the config states no bones[{0}]": "설정에 bones[{0}]이(가) 선언되어 있지 않아요",
|
|
2711
|
+
"the config states no motion.blink; a still row belongs to the blink": "설정에 motion.blink가 선언되어 있지 않아요. 고정 행은 눈 깜빡임에 속해요",
|
|
2712
|
+
"the config states no stops[{0}]": "설정에 stops[{0}]이(가) 선언되어 있지 않아요",
|
|
2713
|
+
"the config states no turn": "설정에 turn이 선언되어 있지 않아요",
|
|
2714
|
+
"the dial must be a finite number": "다이얼 값은 유한한 숫자여야 해요",
|
|
2715
|
+
"the drawn root bone is at ({0}, {1}), not the world origin": "그려진 루트 본이 월드 원점이 아닌 ({0}, {1})에 있어요",
|
|
2716
|
+
"the entry is not a contour; contour.bust applies to contour meshes only": "항목이 윤곽(contour) 모드가 아니에요. contour.bust는 윤곽 메시에만 적용돼요",
|
|
2717
|
+
"the handoff config is not an object": "핸드오프 설정이 객체가 아니에요",
|
|
2718
|
+
"the handoff config states no motion": "핸드오프 설정에 motion이 선언되어 있지 않아요",
|
|
2714
2719
|
"the handoff config with {0} patch op(s)": "패치 작업 {0}개가 적용된 핸드오프 설정",
|
|
2715
2720
|
"the inspected build": "점검 중인 빌드",
|
|
2716
2721
|
"the inspected build (model {0}…)": "점검 중인 빌드 (모델 {0}…)",
|
|
2717
2722
|
"the inspected build (nothing applied)": "점검 중인 빌드 (적용된 항목 없음)",
|
|
2718
|
-
"the inspected {0} is not the image the config draws (a repaired or redrawn image); retune holds every image, so no physics or idle edit Applies on this build — the baseline line says what still does": "점검 중인 {0}이(가) 설정이 그리는 이미지가
|
|
2723
|
+
"the inspected {0} is not the image the config draws (a repaired or redrawn image); retune holds every image, so no physics or idle edit Applies on this build — the baseline line says what still does": "점검 중인 {0}이(가) 설정이 그리는 이미지가 아니에요(수정되거나 다시 그려진 이미지). retune은 모든 이미지를 고정하므로 이 빌드에서는 물리 또는 아이들 편집을 적용할 수 없어요 — 기준선 안내 줄에서 사용 가능한 편집을 확인하세요",
|
|
2719
2724
|
"the largest island, in art pixels, that may be left out of the lattice": "격자에서 제외될 수 있는 가장 큰 아일랜드 크기(아트 픽셀 단위)",
|
|
2720
2725
|
"the largest island, in art pixels, that may be left out of the mesh": "메시에서 제외될 수 있는 가장 큰 아일랜드 크기(아트 픽셀 단위)",
|
|
2721
2726
|
"the last applied record": "마지막 적용 레코드",
|
|
2722
2727
|
"the last applied record (model {0}…)": "마지막 적용 레코드 (모델 {0}…)",
|
|
2723
2728
|
"the lattice: cell size, px (a whole number, 1 or more)": "격자: 셀 크기, px (1 이상의 정수)",
|
|
2724
2729
|
"the longest outline edge, px, above 0 (absent: nothing is cut)": "가장 긴 외곽선 엣지, px, 0보다 큼 (생략 시 분할 안 함)",
|
|
2725
|
-
"the model declares no stage": "모델에 선언된 스테이지가
|
|
2726
|
-
"the model entry stores no hull": "모델 항목에 저장된 헐(hull)이
|
|
2727
|
-
"the model has no pages section": "모델에 pages 섹션이
|
|
2728
|
-
"the model stage ({0}, {1}, {2}×{3}) is not a crop frame with the root at its bottom centre": "모델 스테이지({0}, {1}, {2}×{3})가 하단 중앙에 루트를 둔 크롭 프레임이
|
|
2729
|
-
"the model stage is not a positive finite box": "모델 스테이지가 양의 유한한 박스가
|
|
2730
|
+
"the model declares no stage": "모델에 선언된 스테이지가 없어요",
|
|
2731
|
+
"the model entry stores no hull": "모델 항목에 저장된 헐(hull)이 없어요",
|
|
2732
|
+
"the model has no pages section": "모델에 pages 섹션이 없어요",
|
|
2733
|
+
"the model stage ({0}, {1}, {2}×{3}) is not a crop frame with the root at its bottom centre": "모델 스테이지({0}, {1}, {2}×{3})가 하단 중앙에 루트를 둔 크롭 프레임이 아니에요",
|
|
2734
|
+
"the model stage is not a positive finite box": "모델 스테이지가 양의 유한한 박스가 아니에요",
|
|
2730
2735
|
"the most bones that pull one vertex (absent is 4)": "하나의 정점을 당기는 최대 본 개수 (생략 시 4)",
|
|
2731
2736
|
"the most vertices the mesh may have (refused above it, nothing thinned)": "메시가 가질 수 있는 최대 정점 수 (초과 시 거부되며 단순화하지 않음)",
|
|
2732
|
-
"the op must name its bone entry": "작업에 대상 본 항목 이름이 지정되어야
|
|
2733
|
-
"the package or its producer handoff changed during the check": "검사 중 패키지 또는 프로듀서 핸드오프가
|
|
2734
|
-
"the package or its producer handoff changed during the rebuild": "리빌드 중 패키지 또는 프로듀서 핸드오프가
|
|
2735
|
-
"the patch was made against config {0}…, the handoff config is {1}…; read the config again and remake the patch": "패치가 설정 {0}…에 대해 생성되었으나 핸드오프 설정은 {1}
|
|
2736
|
-
"the patch was made for {0} {1}; the installed producer is {2} {3}": "패치가 {0} {1}용으로 생성되었으나 설치된 프로듀서는 {2} {3}
|
|
2737
|
-
"the patched config has no meshes.{0}": "패치된 설정에 meshes.{0}이(가)
|
|
2738
|
-
"the presented reference timestamp is outside the shared clip domain; choose a supported time": "표시된 레퍼런스 타임스탬프가 공유 클립 도메인을
|
|
2739
|
-
"the producer config changed since the editor read it; reload": "편집기가 읽은 이후 프로듀서 설정이
|
|
2737
|
+
"the op must name its bone entry": "작업에 대상 본 항목 이름이 지정되어야 해요",
|
|
2738
|
+
"the package or its producer handoff changed during the check": "검사 중 패키지 또는 프로듀서 핸드오프가 변경됐어요",
|
|
2739
|
+
"the package or its producer handoff changed during the rebuild": "리빌드 중 패키지 또는 프로듀서 핸드오프가 변경됐어요",
|
|
2740
|
+
"the patch was made against config {0}…, the handoff config is {1}…; read the config again and remake the patch": "패치가 설정 {0}…에 대해 생성되었으나 핸드오프 설정은 {1}…이에요. 설정을 다시 읽고 패치를 다시 만드세요",
|
|
2741
|
+
"the patch was made for {0} {1}; the installed producer is {2} {3}": "패치가 {0} {1}용으로 생성되었으나 설치된 프로듀서는 {2} {3}이에요",
|
|
2742
|
+
"the patched config has no meshes.{0}": "패치된 설정에 meshes.{0}이(가) 없어요",
|
|
2743
|
+
"the presented reference timestamp is outside the shared clip domain; choose a supported time": "표시된 레퍼런스 타임스탬프가 공유 클립 도메인을 벗어났어요. 지원되는 시간을 선택하세요",
|
|
2744
|
+
"the producer config changed since the editor read it; reload": "편집기가 읽은 이후 프로듀서 설정이 변경됐어요. 새로고침하세요",
|
|
2740
2745
|
"the reference": "레퍼런스",
|
|
2741
|
-
"the restored job carries no build": "복원된 작업에 빌드가 포함되어 있지
|
|
2742
|
-
"the rig has no meshed part": "리그에 메시가 있는 파츠가
|
|
2743
|
-
"the rig spec declares no bone": "리그 사양에 선언된 본이
|
|
2744
|
-
"the rig spec declares no ik or transform constraint": "리그 사양에 선언된 IK 또는 트랜스폼 제약 조건이
|
|
2746
|
+
"the restored job carries no build": "복원된 작업에 빌드가 포함되어 있지 않아요",
|
|
2747
|
+
"the rig has no meshed part": "리그에 메시가 있는 파츠가 없어요",
|
|
2748
|
+
"the rig spec declares no bone": "리그 사양에 선언된 본이 없어요",
|
|
2749
|
+
"the rig spec declares no ik or transform constraint": "리그 사양에 선언된 IK 또는 트랜스폼 제약 조건이 없어요",
|
|
2745
2750
|
"the rig's own animations unchanged": "리그 자체 애니메이션 변경 없음",
|
|
2746
2751
|
"the scratch build's Apply check": "임시 빌드의 적용 검사",
|
|
2747
2752
|
"the scratch build's Apply check{0}": "임시 빌드의 적용 검사{0}",
|
|
2748
2753
|
"the setup mesh is": "셋업 메시는",
|
|
2749
|
-
"the stage's last Apply is {0}…, not {1}…; reload": "스테이지의 마지막 적용이 {1}…이(가) 아닌 {0}
|
|
2754
|
+
"the stage's last Apply is {0}…, not {1}…; reload": "스테이지의 마지막 적용이 {1}…이(가) 아닌 {0}…이에요. 새로고침하세요",
|
|
2750
2755
|
"the weight rule: \"distance\" (w = 1/(d + r)^exponent, what absent means) or \"heat\" (bone heat over the part's silhouette)": "가중치 규칙: \"distance\" (w = 1/(d + r)^exponent, 생략 시 기본값) 또는 \"heat\" (파츠 실루엣에 대한 본 히트)",
|
|
2751
2756
|
"their values": "해당 값들",
|
|
2752
2757
|
"this world · {0}": "현재 월드 · {0}",
|
|
@@ -2761,16 +2766,16 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2761
2766
|
"tolerance ": "허용 오차 ",
|
|
2762
2767
|
"tolerance °": "허용 오차 °",
|
|
2763
2768
|
"tolerance: a number 0 or more": "허용 오차: 0 이상의 숫자",
|
|
2764
|
-
"track entry is not an object": "트랙 항목이 객체가
|
|
2765
|
-
"track has no bone target": "트랙에 대상 본이
|
|
2769
|
+
"track entry is not an object": "트랙 항목이 객체가 아니에요",
|
|
2770
|
+
"track has no bone target": "트랙에 대상 본이 없어요",
|
|
2766
2771
|
"translate {0} →": "{0} 이동 →",
|
|
2767
2772
|
"translated bone": "이동 대상 본",
|
|
2768
|
-
"triangles are not whole indices into its vertices": "삼각형이 정점에 대한 정수 인덱스가
|
|
2773
|
+
"triangles are not whole indices into its vertices": "삼각형이 정점에 대한 정수 인덱스가 아니에요",
|
|
2769
2774
|
"true or false": "true 또는 false",
|
|
2770
2775
|
"turn ({0} depths)": "회전 (깊이 {0}개)",
|
|
2771
2776
|
"turn dial (rig px)": "회전 다이얼 (리그 px)",
|
|
2772
|
-
"turn.depths states no {0}": "turn.depths에 {0}이(가) 선언되어 있지
|
|
2773
|
-
"turn.depths.{0} must be a finite number": "turn.depths.{0}은(는) 유한한 숫자여야
|
|
2777
|
+
"turn.depths states no {0}": "turn.depths에 {0}이(가) 선언되어 있지 않아요",
|
|
2778
|
+
"turn.depths.{0} must be a finite number": "turn.depths.{0}은(는) 유한한 숫자여야 해요",
|
|
2774
2779
|
"turn.depths.{0} value": "turn.depths.{0} 값",
|
|
2775
2780
|
"turn.pivot value": "turn.pivot 값",
|
|
2776
2781
|
"two numbers, root and tip": "루트(root)와 팁(tip) 두 숫자",
|
|
@@ -2788,15 +2793,15 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2788
2793
|
"until the package reloads with a matching catalog": "일치하는 카탈로그로 패키지를 다시 불러올 때까지",
|
|
2789
2794
|
"unweighted: every vertex is {0} at 1.0": "가중치 없음: 모든 정점이 {0}에 1.0으로 고정됨",
|
|
2790
2795
|
"use the files as rig wrote them, or re-serialise them in a copy of the package exactly as rig writes them (JSON with one space of indent and a closing newline) and open the copy": "rig가 기록한 파일 그대로 사용하거나, 패키지 복사본에서 rig가 기록하는 형식(공백 1칸 들여쓰기 및 마지막 줄바꿈이 있는 JSON) 그대로 다시 직렬화한 뒤 복사본을 여세요",
|
|
2791
|
-
"usedForReadings must be a boolean": "usedForReadings는 불리언이어야
|
|
2796
|
+
"usedForReadings must be a boolean": "usedForReadings는 불리언이어야 해요",
|
|
2792
2797
|
"v / t (remesh.json)": "정점 / 삼각형 (remesh.json)",
|
|
2793
2798
|
"v {0} · t {1}": "정점 {0} · 삼각형 {1}",
|
|
2794
2799
|
"v {0} · t {1} · hull {2}": "정점 {0} · 삼각형 {1} · 헐 {2}",
|
|
2795
2800
|
"val ": "값 ",
|
|
2796
2801
|
"vertex {0} added": "정점 {0} 추가됨",
|
|
2797
2802
|
"vertex {0} removed with its edges": "정점 {0} 및 연결된 엣지 제거됨",
|
|
2798
|
-
"vertices are not { weighted, xy | bindings }": "정점이 { weighted, xy | bindings } 형식이
|
|
2799
|
-
"video duration is not finite": "비디오 길이가 유한하지
|
|
2803
|
+
"vertices are not { weighted, xy | bindings }": "정점이 { weighted, xy | bindings } 형식이 아니에요",
|
|
2804
|
+
"video duration is not finite": "비디오 길이가 유한하지 않아요",
|
|
2800
2805
|
"vs": "대(vs)",
|
|
2801
2806
|
"was {0}": "기존 {0}",
|
|
2802
2807
|
"weighted over {0} bone(s)": "본 {0}개에 가중치 분배됨",
|
|
@@ -2805,15 +2810,15 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2805
2810
|
"whole-rig edits refuse (EDIT_BASELINE_MISMATCH)": "전체 리그 편집 거부됨 (EDIT_BASELINE_MISMATCH)",
|
|
2806
2811
|
"widest margin among ties": "동률 중 최대 여유폭",
|
|
2807
2812
|
"wind [root, tip]": "바람 [루트, 팁]",
|
|
2808
|
-
"wind dt must be finite, non-negative and keep a finite clock": "바람 dt는 유한한 0 이상의 값이어야 하며 유한한 클록을 유지해야
|
|
2809
|
-
"wind snapshot breeze and repeat must be booleans": "바람 스냅샷의 breeze와 repeat는 불리언이어야
|
|
2810
|
-
"wind snapshot must be a version 1 object": "바람 스냅샷은 버전 1 객체여야
|
|
2813
|
+
"wind dt must be finite, non-negative and keep a finite clock": "바람 dt는 유한한 0 이상의 값이어야 하며 유한한 클록을 유지해야 해요",
|
|
2814
|
+
"wind snapshot breeze and repeat must be booleans": "바람 스냅샷의 breeze와 repeat는 불리언이어야 해요",
|
|
2815
|
+
"wind snapshot must be a version 1 object": "바람 스냅샷은 버전 1 객체여야 해요",
|
|
2811
2816
|
"wind {0}{1} · {2}{3} · total {4} · gravity {5} · {6}": "바람 {0}{1} · {2}{3} · 합계 {4} · 중력 {5} · {6}",
|
|
2812
2817
|
"wind: {0} + {1} + {2} = {3} · gravity {4} · t {5} s{6}": "바람: {0} + {1} + {2} = {3} · 중력 {4} · t {5}초{6}",
|
|
2813
2818
|
"within [0, {0}]": "[0, {0}] 범위 내",
|
|
2814
2819
|
"within [{0}, {1}]": "[{0}, {1}] 범위 내",
|
|
2815
2820
|
"within ±{0}": "±{0} 범위 내",
|
|
2816
|
-
"xy is not an even list of finite numbers": "xy가 유한한 숫자의 짝수 개 목록이
|
|
2821
|
+
"xy is not an even list of finite numbers": "xy가 유한한 숫자의 짝수 개 목록이 아니에요",
|
|
2817
2822
|
"{0} (+{1} more)": "{0} (외 {1}개)",
|
|
2818
2823
|
"{0} (at {1})": "{0} ({1} 위치)",
|
|
2819
2824
|
"{0} (chain \"{1}\", link {2})": "{0} (체인 \"{1}\", 링크 {2})",
|
|
@@ -2827,16 +2832,16 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2827
2832
|
"{0} ({1},{2}) r:{3}×{4} b:{5}": "{0} ({1},{2}) r:{3}×{4} b:{5}",
|
|
2828
2833
|
"{0} / {1} / {2} · {3} vertices · {4} triangles · hull {5} · {6}": "{0} / {1} / {2} · 정점 {3}개 · 삼각형 {4}개 · 헐 {5} · {6}",
|
|
2829
2834
|
"{0} / {1} / {2}{3} · {4} vertices · {5} · setup pose{6}": "{0} / {1} / {2}{3} · 정점 {4}개 · {5} · 셋업 포즈{6}",
|
|
2830
|
-
"{0} / {1} is a linked mesh of {2} / {3}; edit its source mesh": "{0} / {1}은(는) {2} / {3}의 연결된
|
|
2835
|
+
"{0} / {1} is a linked mesh of {2} / {3}; edit its source mesh": "{0} / {1}은(는) {2} / {3}의 연결된 메시예요. 원본 메시를 편집하세요",
|
|
2831
2836
|
"{0} / {1} s": "{0} / {1}초",
|
|
2832
|
-
"{0} Could not open comparison rig.": "{0} 비교 리그를 열 수
|
|
2837
|
+
"{0} Could not open comparison rig.": "{0} 비교 리그를 열 수 없어요.",
|
|
2833
2838
|
"{0} Declared: {1}. {2}{3}{4}": "{0} 선언됨: {1}. {2}{3}{4}",
|
|
2834
2839
|
"{0} F{1}": "{0} F{1}",
|
|
2835
2840
|
"{0} LINT line(s) (blocks nothing)": "LINT {0}줄 (차단하지 않음)",
|
|
2836
2841
|
"{0} amp": "{0} 진폭(amp)",
|
|
2837
2842
|
"{0} and {1} more": "{0} 외 {1}개",
|
|
2838
|
-
"{0} animation \"{1}\" is absent from the current rig; no seek was performed.": "현재 리그에 {0} 애니메이션 \"{1}\"이(가) 없어 이동하지
|
|
2839
|
-
"{0} attachment draws no page image": "{0} 어태치먼트가 그리는 페이지 이미지가
|
|
2843
|
+
"{0} animation \"{1}\" is absent from the current rig; no seek was performed.": "현재 리그에 {0} 애니메이션 \"{1}\"이(가) 없어 이동하지 않았어요.",
|
|
2844
|
+
"{0} attachment draws no page image": "{0} 어태치먼트가 그리는 페이지 이미지가 없어요",
|
|
2840
2845
|
"{0} axes": "축 {0}개",
|
|
2841
2846
|
"{0} bend": "{0} 굽힘",
|
|
2842
2847
|
"{0} bone": "{0} 본",
|
|
@@ -2844,11 +2849,11 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2844
2849
|
"{0} box": "{0} 박스",
|
|
2845
2850
|
"{0} box max": "{0} 박스 최댓값",
|
|
2846
2851
|
"{0} box min": "{0} 박스 최솟값",
|
|
2847
|
-
"{0} box must have x1 > x0 and y1 > y0": "{0} 박스는 x1 > x0 및 y1 > y0을 만족해야
|
|
2852
|
+
"{0} box must have x1 > x0 and y1 > y0": "{0} 박스는 x1 > x0 및 y1 > y0을 만족해야 해요",
|
|
2848
2853
|
"{0} box {1}": "{0} 박스 {1}",
|
|
2849
2854
|
"{0} box[{1}]": "{0} 박스[{1}]",
|
|
2850
2855
|
"{0} build · {1} {2} check --environment · {3}{4}": "{0} 빌드 · {1} {2} check --environment · {3}{4}",
|
|
2851
|
-
"{0} changed since the review was opened; restart review": "리뷰를 연 이후 {0}이(가)
|
|
2856
|
+
"{0} changed since the review was opened; restart review": "리뷰를 연 이후 {0}이(가) 변경됐어요. 리뷰를 재시작하세요",
|
|
2852
2857
|
"{0} config bones · {1} anchors (origins, chain points, tips) in rig px{2}{3}": "설정 본 {0}개 · 리그 px 단위 앵커(원점, 체인 포인트, 팁) {1}개{2}{3}",
|
|
2853
2858
|
"{0} cumulative op(s) pending{1} · cap {2}": "누적 보류 작업 {0}개{1} · 한도 {2}",
|
|
2854
2859
|
"{0} cut(s) · {1} patch(es) · {2} limb joint(s) in rig px of the setup pose{3}{4}{5}": "셋업 포즈 리그 px 기준 분할 {0}개 · 패치 {1}개 · 팔다리 관절 {2}개{3}{4}{5}",
|
|
@@ -2858,69 +2863,69 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2858
2863
|
"{0} depth": "{0} 깊이",
|
|
2859
2864
|
"{0} differs at {1} path(s)": "{0} 경로 {1}개 차이",
|
|
2860
2865
|
"{0} discrete times": "이산 시간 {0}개",
|
|
2861
|
-
"{0} does not start with \"/\"": "{0}이(가) \"/\"로 시작하지
|
|
2866
|
+
"{0} does not start with \"/\"": "{0}이(가) \"/\"로 시작하지 않아요",
|
|
2862
2867
|
"{0} events · {1} explicitly empty categories": "이벤트 {0}개 · 명시적으로 비어 있는 카테고리 {1}개",
|
|
2863
2868
|
"{0} fps · frame0 {1} s": "{0} fps · frame0 {1}초",
|
|
2864
2869
|
"{0} frame {1}": "{0} 프레임 {1}",
|
|
2865
|
-
"{0} has a \"~\" that is not \"~0\" or \"~1\"": "{0}에 \"~0\" 또는 \"~1\"이 아닌 \"~\"가 포함되어
|
|
2866
|
-
"{0} has neither bust landmarks nor regions": "{0}에 가슴 랜드마크와 영역이 모두
|
|
2867
|
-
"{0} has no ops": "{0}에 작업이
|
|
2868
|
-
"{0} has no patch ops": "{0}에 패치 작업이
|
|
2869
|
-
"{0} has no vertex {1}": "{0}에 정점 {1}이(가)
|
|
2870
|
-
"{0} has {1} point(s); a polygon region needs 3 or more": "{0}에 점 {1}개가
|
|
2871
|
-
"{0} holds exactly {1}": "{0}은(는) 정확히 {1}만 포함해야
|
|
2870
|
+
"{0} has a \"~\" that is not \"~0\" or \"~1\"": "{0}에 \"~0\" 또는 \"~1\"이 아닌 \"~\"가 포함되어 있어요",
|
|
2871
|
+
"{0} has neither bust landmarks nor regions": "{0}에 가슴 랜드마크와 영역이 모두 없어요",
|
|
2872
|
+
"{0} has no ops": "{0}에 작업이 없어요",
|
|
2873
|
+
"{0} has no patch ops": "{0}에 패치 작업이 없어요",
|
|
2874
|
+
"{0} has no vertex {1}": "{0}에 정점 {1}이(가) 없어요",
|
|
2875
|
+
"{0} has {1} point(s); a polygon region needs 3 or more": "{0}에 점 {1}개가 있어요. 다각형 영역에는 3개 이상의 점이 필요해요",
|
|
2876
|
+
"{0} holds exactly {1}": "{0}은(는) 정확히 {1}만 포함해야 해요",
|
|
2872
2877
|
"{0} idle tracks from the handoff config ({1} single, {2} chain) · duration {3} s · {4} · periods offered: duration / 1…{5}": "핸드오프 설정의 아이들 트랙 {0}개 (단일 {1}개, 체인 {2}개) · 길이 {3}초 · {4} · 제공 주기: 길이 / 1…{5}",
|
|
2873
2878
|
"{0} image(s) changed, {1} unchanged": "이미지 {0}개 변경됨, {1}개 변경 없음",
|
|
2874
2879
|
"{0} images unchanged": "이미지 {0}개 변경 없음",
|
|
2875
|
-
"{0} in the inspected rig is not the text rig writes for its value (reformatted, or written by another tool); {1} splices a revision as text, so it refuses the file — {2}": "점검 중인 리그의 {0}이(가) 해당 값에 대해 rig가 기록하는 텍스트 형식이
|
|
2880
|
+
"{0} in the inspected rig is not the text rig writes for its value (reformatted, or written by another tool); {1} splices a revision as text, so it refuses the file — {2}": "점검 중인 리그의 {0}이(가) 해당 값에 대해 rig가 기록하는 텍스트 형식이 아니에요(재포맷되었거나 다른 도구가 기록함). {1}은(는) 리비전을 텍스트로 병합하므로 해당 파일을 거부해요 — {2}",
|
|
2876
2881
|
"{0} inherit": "{0} 상속",
|
|
2877
|
-
"{0} is a chain; name one of its links ({1})": "{0}은(는)
|
|
2878
|
-
"{0} is a single bone; it has no links": "{0}은(는) 단일 본이므로 링크가
|
|
2879
|
-
"{0} is missing animation or sequence reference": "{0}에 애니메이션 또는 시퀀스 레퍼런스가
|
|
2880
|
-
"{0} is missing part": "{0}에 파츠가
|
|
2881
|
-
"{0} is missing part or delta ops": "{0}에 파츠 또는 델타 작업이
|
|
2882
|
-
"{0} is not a frame index": "{0}은(는) 프레임 인덱스가
|
|
2883
|
-
"{0} is not a number": "{0}은(는) 숫자가
|
|
2884
|
-
"{0} is not a pose reference the package declares": "{0}은(는) 패키지가 선언한 포즈 레퍼런스가
|
|
2885
|
-
"{0} is not a rig-pose-sequence/1 (a static pose cannot be retargeted)": "{0}은(는) rig-pose-sequence/1이
|
|
2886
|
-
"{0} is not a rigid part (its mesh rides its weights).": "{0}은(는) 강체 파츠가
|
|
2887
|
-
"{0} is not a string": "{0}은(는) 문자열이
|
|
2888
|
-
"{0} is not a whole number": "{0}은(는) 정수가
|
|
2889
|
-
"{0} is not in the config's regions (a meshed part rides its weights)": "{0}이(가) 설정의 regions에
|
|
2890
|
-
"{0} is not offered here: {1}": "여기서는 {0}을(를) 사용할 수
|
|
2891
|
-
"{0} is not offered here: {1}.": "여기서는 {0}을(를) 사용할 수
|
|
2892
|
-
"{0} is not under /motion": "{0}이(가) /motion 하위 경로가
|
|
2893
|
-
"{0} is off the 1/{1} px grid": "{0}이(가) 1/{1} px 그리드를
|
|
2894
|
-
"{0} is required": "{0}이(가)
|
|
2895
|
-
"{0} is the upper segment of {1}; only a segment below a joint takes a range": "{0}은(는) {1}의 상위
|
|
2882
|
+
"{0} is a chain; name one of its links ({1})": "{0}은(는) 체인이에요. 링크 중 하나를 지정하세요({1})",
|
|
2883
|
+
"{0} is a single bone; it has no links": "{0}은(는) 단일 본이므로 링크가 없어요",
|
|
2884
|
+
"{0} is missing animation or sequence reference": "{0}에 애니메이션 또는 시퀀스 레퍼런스가 누락됐어요",
|
|
2885
|
+
"{0} is missing part": "{0}에 파츠가 누락됐어요",
|
|
2886
|
+
"{0} is missing part or delta ops": "{0}에 파츠 또는 델타 작업이 누락됐어요",
|
|
2887
|
+
"{0} is not a frame index": "{0}은(는) 프레임 인덱스가 아니에요",
|
|
2888
|
+
"{0} is not a number": "{0}은(는) 숫자가 아니에요",
|
|
2889
|
+
"{0} is not a pose reference the package declares": "{0}은(는) 패키지가 선언한 포즈 레퍼런스가 아니에요",
|
|
2890
|
+
"{0} is not a rig-pose-sequence/1 (a static pose cannot be retargeted)": "{0}은(는) rig-pose-sequence/1이 아니에요(정적 포즈는 리타겟할 수 없음)",
|
|
2891
|
+
"{0} is not a rigid part (its mesh rides its weights).": "{0}은(는) 강체 파츠가 아니에요(메시가 가중치를 따름).",
|
|
2892
|
+
"{0} is not a string": "{0}은(는) 문자열이 아니에요",
|
|
2893
|
+
"{0} is not a whole number": "{0}은(는) 정수가 아니에요",
|
|
2894
|
+
"{0} is not in the config's regions (a meshed part rides its weights)": "{0}이(가) 설정의 regions에 없어요(메시 파츠는 가중치를 따름)",
|
|
2895
|
+
"{0} is not offered here: {1}": "여기서는 {0}을(를) 사용할 수 없어요: {1}",
|
|
2896
|
+
"{0} is not offered here: {1}.": "여기서는 {0}을(를) 사용할 수 없어요: {1}.",
|
|
2897
|
+
"{0} is not under /motion": "{0}이(가) /motion 하위 경로가 아니에요",
|
|
2898
|
+
"{0} is off the 1/{1} px grid": "{0}이(가) 1/{1} px 그리드를 벗어났어요",
|
|
2899
|
+
"{0} is required": "{0}이(가) 필요해요",
|
|
2900
|
+
"{0} is the upper segment of {1}; only a segment below a joint takes a range": "{0}은(는) {1}의 상위 세그먼트예요. 관절 아래의 세그먼트만 범위를 가질 수 있어요",
|
|
2896
2901
|
"{0} keys selected ({1} track(s)) · anchor {2} · {3} #{4}": "키 {0}개 선택됨 (트랙 {1}개) · 기준 {2} · {3} #{4}",
|
|
2897
2902
|
"{0} keys selected ({1} track)": "키 {0}개 선택됨 (트랙 {1}개)",
|
|
2898
2903
|
"{0} keys selected ({1} tracks)": "키 {0}개 선택됨 (트랙 {1}개)",
|
|
2899
|
-
"{0} mixes multiple panels ({1})": "{0}에 여러 패널({1})이 혼합되어
|
|
2900
|
-
"{0} must be [x, y], finite": "{0}은(는) 유한한 [x, y]여야
|
|
2901
|
-
"{0} must be [x, y], finite rig px": "{0}은(는) 유한한 리그 px 단위의 [x, y]여야
|
|
2902
|
-
"{0} must be a finite number{1}": "{0}은(는) 유한한 숫자여야
|
|
2903
|
-
"{0} must be a non-negative integer of rig px (the config's polygons and boxes are)": "{0}은(는) 리그 px 단위의 0 이상 정수여야
|
|
2904
|
-
"{0} must be a slot or bone name": "{0}은(는) 슬롯 또는 본 이름이어야
|
|
2905
|
-
"{0} must be an object": "{0}은(는) 객체여야
|
|
2906
|
-
"{0} must be finite and within [{1}, {2}]": "{0}은(는) 유한한 값이어야 하며 [{1}, {2}] 범위 내에 있어야
|
|
2907
|
-
"{0} must be true or false": "{0}은(는) true 또는 false여야
|
|
2908
|
-
"{0} must be two finite numbers": "{0}은(는) 두 개의 유한한 숫자여야
|
|
2909
|
-
"{0} must be {1}": "{0}은(는) {1}이어야
|
|
2910
|
-
"{0} must be {row: number, bone: name}": "{0}은(는) {row: 숫자, bone: 이름} 형식이어야
|
|
2904
|
+
"{0} mixes multiple panels ({1})": "{0}에 여러 패널({1})이 혼합되어 있어요",
|
|
2905
|
+
"{0} must be [x, y], finite": "{0}은(는) 유한한 [x, y]여야 해요",
|
|
2906
|
+
"{0} must be [x, y], finite rig px": "{0}은(는) 유한한 리그 px 단위의 [x, y]여야 해요",
|
|
2907
|
+
"{0} must be a finite number{1}": "{0}은(는) 유한한 숫자여야 해요{1}",
|
|
2908
|
+
"{0} must be a non-negative integer of rig px (the config's polygons and boxes are)": "{0}은(는) 리그 px 단위의 0 이상 정수여야 해요(설정의 다각형 및 박스 기준)",
|
|
2909
|
+
"{0} must be a slot or bone name": "{0}은(는) 슬롯 또는 본 이름이어야 해요",
|
|
2910
|
+
"{0} must be an object": "{0}은(는) 객체여야 해요",
|
|
2911
|
+
"{0} must be finite and within [{1}, {2}]": "{0}은(는) 유한한 값이어야 하며 [{1}, {2}] 범위 내에 있어야 해요",
|
|
2912
|
+
"{0} must be true or false": "{0}은(는) true 또는 false여야 해요",
|
|
2913
|
+
"{0} must be two finite numbers": "{0}은(는) 두 개의 유한한 숫자여야 해요",
|
|
2914
|
+
"{0} must be {1}": "{0}은(는) {1}이어야 해요",
|
|
2915
|
+
"{0} must be {row: number, bone: name}": "{0}은(는) {row: 숫자, bone: 이름} 형식이어야 해요",
|
|
2911
2916
|
"{0} name": "{0} 이름",
|
|
2912
|
-
"{0} names a file the handoff config does not; a patch may not name a new file (review sends no path)": "{0}이(가) 핸드오프 설정에 없는 파일을
|
|
2913
|
-
"{0} names a handoff file; a patch may not change it": "{0}이(가) 핸드오프 파일을
|
|
2914
|
-
"{0} names no config track": "{0}이(가) 설정 트랙을 가리키지
|
|
2915
|
-
"{0} needs at least three points": "{0}에는 최소 3개의 점이
|
|
2917
|
+
"{0} names a file the handoff config does not; a patch may not name a new file (review sends no path)": "{0}이(가) 핸드오프 설정에 없는 파일을 지정해요. 패치는 새 파일을 지정할 수 없어요(리뷰는 경로를 전송하지 않음)",
|
|
2918
|
+
"{0} names a handoff file; a patch may not change it": "{0}이(가) 핸드오프 파일을 지정해요. 패치는 이를 변경할 수 없어요",
|
|
2919
|
+
"{0} names no config track": "{0}이(가) 설정 트랙을 가리키지 않아요",
|
|
2920
|
+
"{0} needs at least three points": "{0}에는 최소 3개의 점이 필요해요",
|
|
2916
2921
|
"{0} no range": "{0} 범위 없음",
|
|
2917
2922
|
"{0} of {1} bones state inherit": "본 {1}개 중 {0}개에 상속 선언됨",
|
|
2918
2923
|
"{0} of {1} triangle(s) folded": "삼각형 {1}개 중 {0}개 접힘",
|
|
2919
2924
|
"{0} on {1}": "{1}의 {0}",
|
|
2920
|
-
"{0} op {1} has no panel owner": "{0} 작업 {1}에 소유 패널이
|
|
2925
|
+
"{0} op {1} has no panel owner": "{0} 작업 {1}에 소유 패널이 없어요",
|
|
2921
2926
|
"{0} op(s) applied on stage · 0 unapplied": "스테이지에 작업 {0}개 적용됨 · 미적용 0개",
|
|
2922
2927
|
"{0} op(s) on {1}": "{1}에 작업 {0}개",
|
|
2923
|
-
"{0} ops[{1}] is missing op or animation": "{0} ops[{1}]에 op 또는 animation이
|
|
2928
|
+
"{0} ops[{1}] is missing op or animation": "{0} ops[{1}]에 op 또는 animation이 누락됐어요",
|
|
2924
2929
|
"{0} overlap": "{0} 겹침",
|
|
2925
2930
|
"{0} part(s) ({1}), {2} chain(s) in the config": "설정에 파츠 {0}개 ({1}), 체인 {2}개",
|
|
2926
2931
|
"{0} path(s) against cloth.json{1}{2}": "cloth.json 대비 경로 {0}개 차이{1}{2}",
|
|
@@ -2934,32 +2939,32 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2934
2939
|
"{0} r:{1} b:{2}": "{0} r:{1} b:{2}",
|
|
2935
2940
|
"{0} range max": "{0} 범위 최댓값",
|
|
2936
2941
|
"{0} range min": "{0} 범위 최솟값",
|
|
2937
|
-
"{0} range must be two numbers of degrees": "{0} 범위는 각도(°)를 나타내는 두 숫자여야
|
|
2942
|
+
"{0} range must be two numbers of degrees": "{0} 범위는 각도(°)를 나타내는 두 숫자여야 해요",
|
|
2938
2943
|
"{0} region(s)": "영역 {0}개",
|
|
2939
|
-
"{0} regions have no names": "{0} 영역에 이름이
|
|
2944
|
+
"{0} regions have no names": "{0} 영역에 이름이 없어요",
|
|
2940
2945
|
"{0} regions screen-left to screen-right: {1}": "화면 왼쪽에서 오른쪽 순 {0}개 영역: {1}",
|
|
2941
|
-
"{0} remesh op is missing part": "{0} 리메시 작업에 파츠가
|
|
2946
|
+
"{0} remesh op is missing part": "{0} 리메시 작업에 파츠가 누락됐어요",
|
|
2942
2947
|
"{0} removed": "{0} 제거됨",
|
|
2943
2948
|
"{0} ribs stations": "{0} 리브 스테이션",
|
|
2944
2949
|
"{0} rides": "{0} 추적 본",
|
|
2945
2950
|
"{0} row": "{0} 행",
|
|
2946
2951
|
"{0} s (seconds basis) · {1}": "{0}초 (초 기준) · {1}",
|
|
2947
|
-
"{0} s at {1} fps is {2} steps; at most {3}": "{1} fps에서 {0}초는 {2}
|
|
2952
|
+
"{0} s at {1} fps is {2} steps; at most {3}": "{1} fps에서 {0}초는 {2}단계예요(최대 {3})",
|
|
2948
2953
|
"{0} s · {1}": "{0}초 · {1}",
|
|
2949
2954
|
"{0} s · {1} cycle": "{0}초 · {1}주기",
|
|
2950
2955
|
"{0} s · {1} cycles": "{0}초 · {1}주기",
|
|
2951
|
-
"{0} sha256 {1}… → {2}; the evicted build was made from the config as it was": "{0} sha256 {1}… → {2}; 비워진 빌드는 변경 전 설정으로부터
|
|
2956
|
+
"{0} sha256 {1}… → {2}; the evicted build was made from the config as it was": "{0} sha256 {1}… → {2}; 비워진 빌드는 변경 전 설정으로부터 생성됐어요",
|
|
2952
2957
|
"{0} still bone": "{0} 고정 본",
|
|
2953
2958
|
"{0} still row": "{0} 고정 행",
|
|
2954
2959
|
"{0} still row {1}": "{0} 고정 행 {1}",
|
|
2955
2960
|
"{0} tag(s) the installed reader accepts{1} · {2}: {3} · built by {4}{5}{6}{7}": "설치된 리더가 허용하는 태그 {0}개{1} · {2}: {3} · 빌드 방식: {4}{5}{6}{7}",
|
|
2956
2961
|
"{0} tip": "{0} 팁",
|
|
2957
|
-
"{0} track \"{1}.{2}\" is read-only in v1": "{0} 트랙 \"{1}.{2}\"은(는) v1에서 읽기
|
|
2962
|
+
"{0} track \"{1}.{2}\" is read-only in v1": "{0} 트랙 \"{1}.{2}\"은(는) v1에서 읽기 전용이에요",
|
|
2958
2963
|
"{0} unavailable · {1}": "{0} 사용 불가 · {1}",
|
|
2959
2964
|
"{0} unchanged": "{0} 변경 없음",
|
|
2960
2965
|
"{0} units ({1} step(s)) on its {2} side": "{2} 측에서 {0} 유닛 ({1}단계)",
|
|
2961
|
-
"{0} validation warnings in existing feedback · original records are preserved. Review the marked entries, delete them and add valid replacements before submitting. JSON and Markdown exports preserve both the original records and warnings.": "기존 피드백에 유효성 경고 {0}개가 있으며 원본 레코드는
|
|
2962
|
-
"{0} validation warnings in existing feedback · original records are preserved. Review the marked entries, delete them and add valid replacements before submitting. The saved session that rig-review feedback exports keeps both the original records and warnings.": "기존 피드백에 유효성 경고 {0}개가 있으며 원본 레코드는
|
|
2966
|
+
"{0} validation warnings in existing feedback · original records are preserved. Review the marked entries, delete them and add valid replacements before submitting. JSON and Markdown exports preserve both the original records and warnings.": "기존 피드백에 유효성 경고 {0}개가 있으며 원본 레코드는 보존돼요. 표시된 항목을 검토하여 삭제하고 제출 전에 유효한 항목으로 다시 추가하세요. JSON 및 Markdown 내보내기는 원본 레코드와 경고를 모두 보존해요.",
|
|
2967
|
+
"{0} validation warnings in existing feedback · original records are preserved. Review the marked entries, delete them and add valid replacements before submitting. The saved session that rig-review feedback exports keeps both the original records and warnings.": "기존 피드백에 유효성 경고 {0}개가 있으며 원본 레코드는 보존돼요. 표시된 항목을 검토하여 삭제하고 제출 전에 유효한 항목으로 다시 추가하세요. rig-review feedback이 내보내는 저장된 세션은 원본 레코드와 경고를 모두 유지해요.",
|
|
2963
2968
|
"{0} value": "{0} 값",
|
|
2964
2969
|
"{0} vertex {1}": "{0} 정점 {1}",
|
|
2965
2970
|
"{0} vertex {1} x": "{0} 정점 {1} x",
|
|
@@ -2974,9 +2979,9 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2974
2979
|
"{0} {1} check on the {2}: {3} line(s){4}": "{2}에서 {0} {1} 검사: {3}줄{4}",
|
|
2975
2980
|
"{0} {1} component": "{0} {1} 성분",
|
|
2976
2981
|
"{0} {1} exited {2} without a named refusal": "{0} {1}이(가) 지정된 거부 사유 없이 종료 코드 {2}(으)로 종료됨",
|
|
2977
|
-
"{0} {1} is not an idle edit": "{0} {1}은(는) 아이들 편집이
|
|
2978
|
-
"{0} {1} is not an idle track edit": "{0} {1}은(는) 아이들 트랙 편집이
|
|
2979
|
-
"{0} {1} not the text rig writes for {2} (reformatted, or written by another tool), and an op that splices a revision as text refuses such a file — {3}": "{0} {1}이(가) {2}에 대해 rig가 기록하는 텍스트 형식이 아니며(재포맷되었거나 다른 도구가 기록함), 리비전을 텍스트로 병합하는 작업은 이러한 파일을
|
|
2982
|
+
"{0} {1} is not an idle edit": "{0} {1}은(는) 아이들 편집이 아니에요",
|
|
2983
|
+
"{0} {1} is not an idle track edit": "{0} {1}은(는) 아이들 트랙 편집이 아니에요",
|
|
2984
|
+
"{0} {1} not the text rig writes for {2} (reformatted, or written by another tool), and an op that splices a revision as text refuses such a file — {3}": "{0} {1}이(가) {2}에 대해 rig가 기록하는 텍스트 형식이 아니며(재포맷되었거나 다른 도구가 기록함), 리비전을 텍스트로 병합하는 작업은 이러한 파일을 거부해요 — {3}",
|
|
2980
2985
|
"{0} {1} px ({2} units²)": "{0} {1} px ({2} 유닛²)",
|
|
2981
2986
|
"{0} {1} range ({2})": "{0} {1} 범위 ({2})",
|
|
2982
2987
|
"{0} {1} refused (REMESH_BASELINE_MISMATCH: the config does not reproduce {2} attachment, image or report row){3}": "{0} {1} 거부됨 (REMESH_BASELINE_MISMATCH: 설정이 {2} 어태치먼트, 이미지 또는 리포트 행을 재현하지 못함){3}",
|
|
@@ -2984,14 +2989,14 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
2984
2989
|
"{0} {1} with {2} {3} on the handoff rig{4} · {5} bone(s), animations {6}": "핸드오프 리그에서 {2} {3}(으)로 {0} {1}{4} · 본 {5}개, 애니메이션 {6}",
|
|
2985
2990
|
"{0} {1} · {2} (remesh.json) — not applied": "{0} {1} · {2} (remesh.json) — 적용되지 않음",
|
|
2986
2991
|
"{0} {1} — not applied": "{0} {1} — 적용되지 않음",
|
|
2987
|
-
"{0} {1} → {2} {3}; the evicted build was made with the version its record names": "{0} {1} → {2} {3}; 비워진 빌드는 레코드에 기록된 버전으로
|
|
2988
|
-
"{0} {1}: no mesh attachment at the setup pose": "{0} {1}: 셋업 포즈에 메시 어태치먼트가
|
|
2989
|
-
"{0} {1}: the model has no such slot": "{0} {1}: 모델에 해당 슬롯이
|
|
2990
|
-
"{0} {1}: {2} / {3} is not a mesh attachment": "{0} {1}: {2} / {3}은(는) 메시 어태치먼트가
|
|
2991
|
-
"{0} · A/B order and reference video hash are fixed": "{0} · A/B 순서 및 레퍼런스 비디오 해시는 고정되어
|
|
2992
|
+
"{0} {1} → {2} {3}; the evicted build was made with the version its record names": "{0} {1} → {2} {3}; 비워진 빌드는 레코드에 기록된 버전으로 생성됐어요",
|
|
2993
|
+
"{0} {1}: no mesh attachment at the setup pose": "{0} {1}: 셋업 포즈에 메시 어태치먼트가 없어요",
|
|
2994
|
+
"{0} {1}: the model has no such slot": "{0} {1}: 모델에 해당 슬롯이 없어요",
|
|
2995
|
+
"{0} {1}: {2} / {3} is not a mesh attachment": "{0} {1}: {2} / {3}은(는) 메시 어태치먼트가 아니에요",
|
|
2996
|
+
"{0} · A/B order and reference video hash are fixed": "{0} · A/B 순서 및 레퍼런스 비디오 해시는 고정되어 있어요",
|
|
2992
2997
|
"{0} · F{1} · {2} s · {3}": "{0} · F{1} · {2}초 · {3}",
|
|
2993
|
-
"{0} · Preserves {1} discrete times. Gaps are not expanded into a continuous interval.": "{0} · 이산 시간 {1}개를
|
|
2994
|
-
"{0} · Submit refuses this review; delete the entry written on that build or Apply a build that passes check.": "{0} · 제출 시 이 리뷰가
|
|
2998
|
+
"{0} · Preserves {1} discrete times. Gaps are not expanded into a continuous interval.": "{0} · 이산 시간 {1}개를 보존해요. 간격은 연속 구간으로 확장되지 않아요.",
|
|
2999
|
+
"{0} · Submit refuses this review; delete the entry written on that build or Apply a build that passes check.": "{0} · 제출 시 이 리뷰가 거부돼요. 해당 빌드에서 작성된 항목을 삭제하거나 검사를 통과하는 빌드를 적용하세요.",
|
|
2995
3000
|
"{0} · bone {1}": "{0} · 본 {1}",
|
|
2996
3001
|
"{0} · comparison unavailable: {1}": "{0} · 비교 사용 불가: {1}",
|
|
2997
3002
|
"{0} · folds: not run": "{0} · 접힘(folds): 실행 안 됨",
|
|
@@ -3001,20 +3006,20 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3001
3006
|
"{0} · review F{1}": "{0} · 리뷰 F{1}",
|
|
3002
3007
|
"{0} · rig review": "{0} · 리그 리뷰",
|
|
3003
3008
|
"{0} · rig review compare": "{0} · 리그 리뷰 비교",
|
|
3004
|
-
"{0} · the preview is off; Apply still runs": "{0} · 미리보기는 꺼져 있으나 적용은 정상
|
|
3009
|
+
"{0} · the preview is off; Apply still runs": "{0} · 미리보기는 꺼져 있으나 적용은 정상 실행돼요",
|
|
3005
3010
|
"{0} · turn x {1} px": "{0} · 회전 x {1} px",
|
|
3006
3011
|
"{0} · valid for export": "{0} · 내보내기 가능",
|
|
3007
|
-
"{0} · {1} (pending {2}) · each value runs as its own replace /meshes/{3} patch through remesh, at most {4} at once": "{0} · {1} (보류 {2}) · 각 값은 remesh를 통해 개별 replace /meshes/{3} 패치로
|
|
3012
|
+
"{0} · {1} (pending {2}) · each value runs as its own replace /meshes/{3} patch through remesh, at most {4} at once": "{0} · {1} (보류 {2}) · 각 값은 remesh를 통해 개별 replace /meshes/{3} 패치로 실행돼요(동시 최대 {4}개)",
|
|
3008
3013
|
"{0} · {1} / rig {2} / motion {3}": "{0} · {1} / 리그 {2} / 모션 {3}",
|
|
3009
3014
|
"{0} · {1} bone(s): {2}": "{0} · 본 {1}개: {2}",
|
|
3010
3015
|
"{0} · {1} chain(s) · config{2}": "{0} · 체인 {1}개 · 설정{2}",
|
|
3011
3016
|
"{0} · {1} chain(s) · written": "{0} · 체인 {1}개 · 기록됨",
|
|
3012
3017
|
"{0} · {1} frame(s) · {2}": "{0} · {1}프레임 · {2}",
|
|
3013
|
-
"{0} · {1} has no numeric curve evaluator": "{0} · {1}에 수치 곡선 평가기가
|
|
3018
|
+
"{0} · {1} has no numeric curve evaluator": "{0} · {1}에 수치 곡선 평가기가 없어요",
|
|
3014
3019
|
"{0} · {1} ranges · Generating {2}…": "{0} · 범위 {1}개 · {2} 생성 중…",
|
|
3015
|
-
"{0} · {1} ranges · Requested {2} download. Review status was not changed.": "{0} · 범위 {1}개 · {2} 다운로드를
|
|
3020
|
+
"{0} · {1} ranges · Requested {2} download. Review status was not changed.": "{0} · 범위 {1}개 · {2} 다운로드를 요청했어요. 리뷰 상태는 변경되지 않았어요.",
|
|
3016
3021
|
"{0} · {1} s": "{0} · {1}초",
|
|
3017
|
-
"{0} · {1} stored tracks · key times in seconds; frames require a declared clock.": "{0} · 저장된 트랙 {1}개 · 키 시간은 초 단위이며 프레임에는 선언된 클록이
|
|
3022
|
+
"{0} · {1} stored tracks · key times in seconds; frames require a declared clock.": "{0} · 저장된 트랙 {1}개 · 키 시간은 초 단위이며 프레임에는 선언된 클록이 필요해요.",
|
|
3018
3023
|
"{0} · {1} unavailable: {2}": "{0} · {1} 사용 불가: {2}",
|
|
3019
3024
|
"{0} · {1} worst": "{0} · 최악값 {1}",
|
|
3020
3025
|
"{0} · {1} {2} worst": "{0} · {1} 최악값 {2}",
|
|
@@ -3024,43 +3029,43 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3024
3029
|
"{0} · {1} · {2}:{3} · F{4}–{5}": "{0} · {1} · {2}:{3} · F{4}–{5}",
|
|
3025
3030
|
"{0} · {1}: no frame{2}": "{0} · {1}: 프레임 없음{2}",
|
|
3026
3031
|
"{0} · {1}: worst at frame {2} — {3}{4}": "{0} · {1}: 프레임 {2}에서 최악값 — {3}{4}",
|
|
3027
|
-
"{0} — the values still edit and export; nothing is drawn on the stage.": "{0} — 값은 계속 편집 및 내보내기할 수 있으며 스테이지에는 아무것도 그려지지
|
|
3032
|
+
"{0} — the values still edit and export; nothing is drawn on the stage.": "{0} — 값은 계속 편집 및 내보내기할 수 있으며 스테이지에는 아무것도 그려지지 않아요.",
|
|
3028
3033
|
"{0} — unavailable": "{0} — 사용 불가",
|
|
3029
3034
|
"{0} → {1} (uncovered {2} → {3}, holes {4} → {5})": "{0} → {1} (미포함 {2} → {3}, 구멍 {4} → {5})",
|
|
3030
3035
|
"{0} → {1} · {2} · {3} links": "{0} → {1} · {2} · 링크 {3}개",
|
|
3031
|
-
"{0}'s origin is not a config bone anchor; the joint is not drawn": "{0}의 원점이 설정 본 앵커가 아니므로 관절이 그려지지
|
|
3036
|
+
"{0}'s origin is not a config bone anchor; the joint is not drawn": "{0}의 원점이 설정 본 앵커가 아니므로 관절이 그려지지 않아요",
|
|
3032
3037
|
"{0}* rotate (chain, {1} links)": "{0}* 회전 (체인, 링크 {1}개)",
|
|
3033
3038
|
"{0}, {1} step(s) · schedule sha256 {2}{3}": "{0}, {1}단계 · 스케줄 sha256 {2}{3}",
|
|
3034
3039
|
"{0}, {1} step(s), sha256 {2} · {3}": "{0}, {1}단계, sha256 {2} · {3}",
|
|
3035
|
-
"{0}. No overlay is drawn; enter the crop size to export.": "{0}. 오버레이가 그려지지
|
|
3040
|
+
"{0}. No overlay is drawn; enter the crop size to export.": "{0}. 오버레이가 그려지지 않아요. 내보내려면 크롭 크기를 입력하세요.",
|
|
3036
3041
|
"{0}. {1} ({2}) · {3} · model {4}…{5}": "{0}. {1} ({2}) · {3} · 모델 {4}…{5}",
|
|
3037
3042
|
"{0}. {1} s": "{0}. {1}초",
|
|
3038
|
-
"{0}.animation: expected non-empty string": "{0}.animation: 비어 있지 않은 문자열이
|
|
3043
|
+
"{0}.animation: expected non-empty string": "{0}.animation: 비어 있지 않은 문자열이 필요해요",
|
|
3039
3044
|
"{0}.animationsFrom: {path, beforeSha256, afterSha256 (SHA-256 hex)}": "{0}.animationsFrom: {path, beforeSha256, afterSha256 (16진수 SHA-256)}",
|
|
3040
3045
|
"{0}.args: at most 16 strings": "{0}.args: 최대 16개의 문자열",
|
|
3041
|
-
"{0}.assembled: present exactly when op is \"build\" (or \"cloth\" built as build)": "{0}.assembled: op가 \"build\"(또는 build로 실행된 \"cloth\")일 때만 존재해야
|
|
3046
|
+
"{0}.assembled: present exactly when op is \"build\" (or \"cloth\" built as build)": "{0}.assembled: op가 \"build\"(또는 build로 실행된 \"cloth\")일 때만 존재해야 해요",
|
|
3042
3047
|
"{0}.bars: {name: status}": "{0}.bars: {이름: 상태}",
|
|
3043
|
-
"{0}.basis: expected single | a | b": "{0}.basis: single | a | b 중 하나여야
|
|
3048
|
+
"{0}.basis: expected single | a | b": "{0}.basis: single | a | b 중 하나여야 해요",
|
|
3044
3049
|
"{0}.blink.{1}[{2}] (the blink's {3} group, which keys {4} on every member)": "{0}.blink.{1}[{2}] (모든 구성원의 {4}에 키를 설정하는 눈 깜빡임의 {3} 그룹)",
|
|
3045
|
-
"{0}.bone {1} is not a bone of the loaded model": "{0}.bone {1}은(는) 로드된 모델의 본이
|
|
3046
|
-
"{0}.channel: expected non-negative integer": "{0}.channel: 0 이상의 정수가
|
|
3047
|
-
"{0}.cloth: present exactly when op is \"cloth\"": "{0}.cloth: op가 \"cloth\"일 때만 존재해야
|
|
3048
|
-
"{0}.curve: expected \"stepped\" or array of finite numbers": "{0}.curve: \"stepped\" 또는 유한한 숫자 배열이
|
|
3049
|
-
"{0}.curve: expected \"stepped\", null, or array of finite numbers": "{0}.curve: \"stepped\", null 또는 유한한 숫자 배열이
|
|
3050
|
+
"{0}.bone {1} is not a bone of the loaded model": "{0}.bone {1}은(는) 로드된 모델의 본이 아니에요",
|
|
3051
|
+
"{0}.channel: expected non-negative integer": "{0}.channel: 0 이상의 정수가 필요해요",
|
|
3052
|
+
"{0}.cloth: present exactly when op is \"cloth\"": "{0}.cloth: op가 \"cloth\"일 때만 존재해야 해요",
|
|
3053
|
+
"{0}.curve: expected \"stepped\" or array of finite numbers": "{0}.curve: \"stepped\" 또는 유한한 숫자 배열이 필요해요",
|
|
3054
|
+
"{0}.curve: expected \"stepped\", null, or array of finite numbers": "{0}.curve: \"stepped\", null 또는 유한한 숫자 배열이 필요해요",
|
|
3050
3055
|
"{0}.delta: a {1} document (basis \"{2}\", slot the part, source.hash, at most {3} ops)": "{0}.delta: {1} 문서 (기준 \"{2}\", 슬롯은 해당 파츠, source.hash, 최대 {3}개 작업)",
|
|
3051
3056
|
"{0}.diff: {count, paths ≤ {1}}": "{0}.diff: {count, paths ≤ {1}}",
|
|
3052
|
-
"{0}.documents: expected [{file, count, paths}]": "{0}.documents: [{file, count, paths}] 형식이어야
|
|
3053
|
-
"{0}.documents[{1}].file: one of {2}, each once": "{0}.documents[{1}].file: {2} 중 하나씩만
|
|
3057
|
+
"{0}.documents: expected [{file, count, paths}]": "{0}.documents: [{file, count, paths}] 형식이어야 해요",
|
|
3058
|
+
"{0}.documents[{1}].file: one of {2}, each once": "{0}.documents[{1}].file: {2} 중 하나씩만 허용돼요",
|
|
3054
3059
|
"{0}.documents[{1}]: {count, paths ≤ {2}}": "{0}.documents[{1}]: {count, paths ≤ {2}}",
|
|
3055
|
-
"{0}.ease: expected non-empty string": "{0}.ease: 비어 있지 않은 문자열이
|
|
3056
|
-
"{0}.ease: expected non-empty string or null": "{0}.ease: 비어 있지 않은 문자열 또는 null이
|
|
3060
|
+
"{0}.ease: expected non-empty string": "{0}.ease: 비어 있지 않은 문자열이 필요해요",
|
|
3061
|
+
"{0}.ease: expected non-empty string or null": "{0}.ease: 비어 있지 않은 문자열 또는 null이 필요해요",
|
|
3057
3062
|
"{0}.environment: {sha256 (SHA-256 hex), steps ≥ 1}": "{0}.environment: {sha256 (16진수 SHA-256), steps ≥ 1}",
|
|
3058
3063
|
"{0}.exitCode: integer": "{0}.exitCode: 정수",
|
|
3059
3064
|
"{0}.gate: boolean or null": "{0}.gate: 불리언 또는 null",
|
|
3060
3065
|
"{0}.images: {changed, unchanged, names ≤ {1}}": "{0}.images: {changed, unchanged, names ≤ {1}}",
|
|
3061
|
-
"{0}.key: expected non-negative integer": "{0}.key: 0 이상의 정수가
|
|
3066
|
+
"{0}.key: expected non-negative integer": "{0}.key: 0 이상의 정수가 필요해요",
|
|
3062
3067
|
"{0}.keypoints: {path, sha256 (SHA-256 hex)}": "{0}.keypoints: {path, sha256 (16진수 SHA-256)}",
|
|
3063
|
-
"{0}.kind must be one of {1}": "{0}.kind는 {1} 중 하나여야
|
|
3068
|
+
"{0}.kind must be one of {1}": "{0}.kind는 {1} 중 하나여야 해요",
|
|
3064
3069
|
"{0}.mesh.part: the delta's part": "{0}.mesh.part: 델타의 대상 파츠",
|
|
3065
3070
|
"{0}.mesh.part: the part the patch's remesh names": "{0}.mesh.part: 패치의 remesh가 지정한 파츠",
|
|
3066
3071
|
"{0}.motion: {animation (the record's), animations, kept, changed, animationSha256, motionSha256}": "{0}.motion: {animation (레코드의 애니메이션), animations, kept, changed, animationSha256, motionSha256}",
|
|
@@ -3071,110 +3076,110 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3071
3076
|
"{0}.part: the part remesh --delta ran on": "{0}.part: remesh --delta가 실행된 파츠",
|
|
3072
3077
|
"{0}.partsChanged: at most {1} part names": "{0}.partsChanged: 최대 {1}개의 파츠 이름",
|
|
3073
3078
|
"{0}.pass: boolean or null": "{0}.pass: 불리언 또는 null",
|
|
3074
|
-
"{0}.patch: a cloth op's patch edits /cloth only": "{0}.patch: 천(cloth) 작업의 패치는 /cloth만
|
|
3079
|
+
"{0}.patch: a cloth op's patch edits /cloth only": "{0}.patch: 천(cloth) 작업의 패치는 /cloth만 편집해요",
|
|
3075
3080
|
"{0}.patch: {1}": "{0}.patch: {1}",
|
|
3076
|
-
"{0}.points must hold 3–{1} points": "{0}.points에는 3–{1}개의 점이 포함되어야
|
|
3081
|
+
"{0}.points must hold 3–{1} points": "{0}.points에는 3–{1}개의 점이 포함되어야 해요",
|
|
3077
3082
|
"{0}.readings: at most {1} lines": "{0}.readings: 최대 {1}줄",
|
|
3078
3083
|
"{0}.readings[{1}]: {code, line, frame, time}": "{0}.readings[{1}]: {code, line, frame, time}",
|
|
3079
3084
|
"{0}.recomposite.{1}: numbers": "{0}.recomposite.{1}: 숫자",
|
|
3080
3085
|
"{0}.route: \"build\" or \"rig\"": "{0}.route: \"build\" 또는 \"rig\"",
|
|
3081
|
-
"{0}.schema: expected {1}": "{0}.schema: {1}이(가)
|
|
3082
|
-
"{0}.schema: expected {1}, {2} (patch {3}), {4} (mesh-edit delta), {5} (retarget) or {6} (animation)": "{0}.schema: {1}, {2}(패치 {3}), {4}(메시 편집 델타), {5}(리타겟) 또는 {6}(애니메이션)이어야
|
|
3086
|
+
"{0}.schema: expected {1}": "{0}.schema: {1}이(가) 필요해요",
|
|
3087
|
+
"{0}.schema: expected {1}, {2} (patch {3}), {4} (mesh-edit delta), {5} (retarget) or {6} (animation)": "{0}.schema: {1}, {2}(패치 {3}), {4}(메시 편집 델타), {5}(리타겟) 또는 {6}(애니메이션)이어야 해요",
|
|
3083
3088
|
"{0}.seamPairs: at most {1} lines": "{0}.seamPairs: 최대 {1}줄",
|
|
3084
|
-
"{0}.shape must be circle or polygon": "{0}.shape는 circle 또는 polygon이어야
|
|
3089
|
+
"{0}.shape must be circle or polygon": "{0}.shape는 circle 또는 polygon이어야 해요",
|
|
3085
3090
|
"{0}.source: \"retune\", \"remesh\" or \"check\"": "{0}.source: \"retune\", \"remesh\" 또는 \"check\"",
|
|
3086
|
-
"{0}.space: expected {1}": "{0}.space: {1}이(가)
|
|
3087
|
-
"{0}.time: expected finite number >= 0": "{0}.time: 0 이상의 유한한 숫자가
|
|
3088
|
-
"{0}.track: expected non-negative integer": "{0}.track: 0 이상의 정수가
|
|
3089
|
-
"{0}.value: expected finite number when channel is given": "{0}.value: 채널이 지정된 경우 유한한 숫자가
|
|
3090
|
-
"{0}.value: expected non-empty array of finite numbers": "{0}.value: 비어 있지 않은 유한한 숫자 배열이
|
|
3091
|
+
"{0}.space: expected {1}": "{0}.space: {1}이(가) 필요해요",
|
|
3092
|
+
"{0}.time: expected finite number >= 0": "{0}.time: 0 이상의 유한한 숫자가 필요해요",
|
|
3093
|
+
"{0}.track: expected non-negative integer": "{0}.track: 0 이상의 정수가 필요해요",
|
|
3094
|
+
"{0}.value: expected finite number when channel is given": "{0}.value: 채널이 지정된 경우 유한한 숫자가 필요해요",
|
|
3095
|
+
"{0}.value: expected non-empty array of finite numbers": "{0}.value: 비어 있지 않은 유한한 숫자 배열이 필요해요",
|
|
3091
3096
|
"{0}.wallMs: whole ms or null": "{0}.wallMs: 정수 ms 또는 null",
|
|
3092
3097
|
"{0}.written: {count, paths ≤ {1}}": "{0}.written: {count, paths ≤ {1}}",
|
|
3093
|
-
"{0}.{1} is not a contour.bust field": "{0}.{1}은(는) contour.bust 필드가
|
|
3094
|
-
"{0}.{1} must be a finite number{2}": "{0}.{1}은(는) 유한한 숫자여야
|
|
3095
|
-
"{0}.{1} must name a bone": "{0}.{1}에는 본 이름을 지정해야
|
|
3096
|
-
"{0}.{1}: expected positive dimension": "{0}.{1}: 양수 크기가
|
|
3098
|
+
"{0}.{1} is not a contour.bust field": "{0}.{1}은(는) contour.bust 필드가 아니에요",
|
|
3099
|
+
"{0}.{1} must be a finite number{2}": "{0}.{1}은(는) 유한한 숫자여야 해요{2}",
|
|
3100
|
+
"{0}.{1} must name a bone": "{0}.{1}에는 본 이름을 지정해야 해요",
|
|
3101
|
+
"{0}.{1}: expected positive dimension": "{0}.{1}: 양수 크기가 필요해요",
|
|
3097
3102
|
"{0}.{1}: unknown field": "{0}.{1}: 알 수 없는 필드",
|
|
3098
3103
|
"{0}.{1}: unsupported field": "{0}.{1}: 지원되지 않는 필드",
|
|
3099
|
-
"{0}: \"{1}\" is not an array index": "{0}: \"{1}\"은(는) 배열 인덱스가
|
|
3104
|
+
"{0}: \"{1}\" is not an array index": "{0}: \"{1}\"은(는) 배열 인덱스가 아니에요",
|
|
3100
3105
|
"{0}: F0–F{1} for the explicit clock and current clip · inclusive": "{0}: 명시적 클록 및 현재 클립 기준 F0–F{1} · 양끝 포함",
|
|
3101
3106
|
"{0}: FAIL": "{0}: 실패(FAIL)",
|
|
3102
|
-
"{0}: F{1} has no time (the reading's set states no fps); no seek was performed.": "{0}: F{1}에 시간이 없어(측정 세트에 fps가 선언되지 않음) 이동하지
|
|
3103
|
-
"{0}: F{1} has no time; no seek was performed.": "{0}: F{1}에 시간이 없어 이동하지
|
|
3107
|
+
"{0}: F{1} has no time (the reading's set states no fps); no seek was performed.": "{0}: F{1}에 시간이 없어(측정 세트에 fps가 선언되지 않음) 이동하지 않았어요.",
|
|
3108
|
+
"{0}: F{1} has no time; no seek was performed.": "{0}: F{1}에 시간이 없어 이동하지 않았어요.",
|
|
3104
3109
|
"{0}: NOT MEASURABLE": "{0}: 측정 불가",
|
|
3105
3110
|
"{0}: PASS": "{0}: 통과(PASS)",
|
|
3106
3111
|
"{0}: Specify an inclusive range of nonnegative integer frames.": "{0}: 0 이상의 정수 프레임으로 양끝을 포함하는 범위를 지정하세요.",
|
|
3107
|
-
"{0}: a circle holds exactly name, shape, cx, cy, r, bone, spacing, band": "{0}: 원형 영역은 정확히 name, shape, cx, cy, r, bone, spacing, band를 포함해야
|
|
3108
|
-
"{0}: a polygon holds exactly name, bone, shape, points, spacing, band": "{0}: 다각형 영역은 정확히 name, bone, shape, points, spacing, band를 포함해야
|
|
3112
|
+
"{0}: a circle holds exactly name, shape, cx, cy, r, bone, spacing, band": "{0}: 원형 영역은 정확히 name, shape, cx, cy, r, bone, spacing, band를 포함해야 해요",
|
|
3113
|
+
"{0}: a polygon holds exactly name, bone, shape, points, spacing, band": "{0}: 다각형 영역은 정확히 name, bone, shape, points, spacing, band를 포함해야 해요",
|
|
3109
3114
|
"{0}: animation \"{1}\" Not supplied": "{0}: 애니메이션 \"{1}\" 제공되지 않음",
|
|
3110
|
-
"{0}: at most {1} ops per attachment — download and reset to continue": "{0}: 어태치먼트당 최대 {1}개의 작업만
|
|
3111
|
-
"{0}: buildId, configHash, deltaSha256 and modelHash are SHA-256 hex": "{0}: buildId, configHash, deltaSha256 및 modelHash는 16진수 SHA-256이어야
|
|
3112
|
-
"{0}: buildId, configHash, entrySha256 and modelHash are SHA-256 hex": "{0}: buildId, configHash, entrySha256 및 modelHash는 16진수 SHA-256이어야
|
|
3113
|
-
"{0}: buildId, configHash, opsSha256 and modelHash are SHA-256 hex": "{0}: buildId, configHash, opsSha256 및 modelHash는 16진수 SHA-256이어야
|
|
3114
|
-
"{0}: buildId, configHash, patchSha256 and modelHash are SHA-256 hex": "{0}: buildId, configHash, patchSha256 및 modelHash는 16진수 SHA-256이어야
|
|
3115
|
-
"{0}: buildId, configHash, recordSha256 and modelHash are SHA-256 hex": "{0}: buildId, configHash, recordSha256 및 modelHash는 16진수 SHA-256이어야
|
|
3115
|
+
"{0}: at most {1} ops per attachment — download and reset to continue": "{0}: 어태치먼트당 최대 {1}개의 작업만 허용돼요 — 계속하려면 다운로드 후 초기화하세요",
|
|
3116
|
+
"{0}: buildId, configHash, deltaSha256 and modelHash are SHA-256 hex": "{0}: buildId, configHash, deltaSha256 및 modelHash는 16진수 SHA-256이어야 해요",
|
|
3117
|
+
"{0}: buildId, configHash, entrySha256 and modelHash are SHA-256 hex": "{0}: buildId, configHash, entrySha256 및 modelHash는 16진수 SHA-256이어야 해요",
|
|
3118
|
+
"{0}: buildId, configHash, opsSha256 and modelHash are SHA-256 hex": "{0}: buildId, configHash, opsSha256 및 modelHash는 16진수 SHA-256이어야 해요",
|
|
3119
|
+
"{0}: buildId, configHash, patchSha256 and modelHash are SHA-256 hex": "{0}: buildId, configHash, patchSha256 및 modelHash는 16진수 SHA-256이어야 해요",
|
|
3120
|
+
"{0}: buildId, configHash, recordSha256 and modelHash are SHA-256 hex": "{0}: buildId, configHash, recordSha256 및 modelHash는 16진수 SHA-256이어야 해요",
|
|
3116
3121
|
"{0}: check running… (rig-parts check of the inspected build, in the background)": "{0}: 검사 실행 중… (백그라운드에서 점검 중인 빌드의 rig-parts check 실행)",
|
|
3117
3122
|
"{0}: compiled model Not supplied": "{0}: 컴파일된 모델 제공되지 않음",
|
|
3118
|
-
"{0}: delete_key expects {op, animation, track, key}": "{0}: delete_key에는 {op, animation, track, key}가
|
|
3119
|
-
"{0}: exiting — last review window closed (0 live connections for {1}ms).": "{0}: 종료 중 — 마지막 리뷰 창이
|
|
3120
|
-
"{0}: exiting — no review window connected within {1}ms.": "{0}: 종료 중 — {1}ms 내에 연결된 리뷰 창이
|
|
3121
|
-
"{0}: expected an animation op object": "{0}: 애니메이션 작업 객체가
|
|
3122
|
-
"{0}: expected boolean": "{0}: 불리언이
|
|
3123
|
-
"{0}: expected exactly {{1}}": "{0}: 정확히 {{1}}이어야
|
|
3124
|
-
"{0}: expected finite {1}..{2}": "{0}: 유한한 {1}..{2} 범위의 값이
|
|
3125
|
-
"{0}: expected inclusive safe integers 0 <= frameStart <= frameEnd": "{0}: 0 <= frameStart <= frameEnd를 만족하는 양끝 포함 안전 정수가
|
|
3126
|
-
"{0}: expected nonempty name <= 512": "{0}: 512자 이하의 비어 있지 않은 이름이
|
|
3127
|
-
"{0}: expected nonempty string <= 256 characters": "{0}: 256자 이하의 비어 있지 않은 문자열이
|
|
3128
|
-
"{0}: expected nonempty text <= {1}": "{0}: {1}자 이하의 비어 있지 않은 텍스트가
|
|
3129
|
-
"{0}: expected object": "{0}: 객체가
|
|
3130
|
-
"{0}: expected safe integer >= 0": "{0}: 0 이상의 안전 정수가
|
|
3131
|
-
"{0}: expected the producer's line or null": "{0}: 프로듀서의 출력 줄 또는 null이
|
|
3132
|
-
"{0}: expected {1}": "{0}: {1}이(가)
|
|
3133
|
-
"{0}: index {1} is past the array's {2} item(s)": "{0}: 인덱스 {1}이(가) 배열의 항목 수({2}개)를
|
|
3134
|
-
"{0}: insert_key expects {op, animation, track, time, value, curve?, ease?}": "{0}: insert_key에는 {op, animation, track, time, value, curve?, ease?}가
|
|
3123
|
+
"{0}: delete_key expects {op, animation, track, key}": "{0}: delete_key에는 {op, animation, track, key}가 필요해요",
|
|
3124
|
+
"{0}: exiting — last review window closed (0 live connections for {1}ms).": "{0}: 종료 중 — 마지막 리뷰 창이 닫혔어요({1}ms 동안 활성 연결 0개).",
|
|
3125
|
+
"{0}: exiting — no review window connected within {1}ms.": "{0}: 종료 중 — {1}ms 내에 연결된 리뷰 창이 없어요.",
|
|
3126
|
+
"{0}: expected an animation op object": "{0}: 애니메이션 작업 객체가 필요해요",
|
|
3127
|
+
"{0}: expected boolean": "{0}: 불리언이 필요해요",
|
|
3128
|
+
"{0}: expected exactly {{1}}": "{0}: 정확히 {{1}}이어야 해요",
|
|
3129
|
+
"{0}: expected finite {1}..{2}": "{0}: 유한한 {1}..{2} 범위의 값이 필요해요",
|
|
3130
|
+
"{0}: expected inclusive safe integers 0 <= frameStart <= frameEnd": "{0}: 0 <= frameStart <= frameEnd를 만족하는 양끝 포함 안전 정수가 필요해요",
|
|
3131
|
+
"{0}: expected nonempty name <= 512": "{0}: 512자 이하의 비어 있지 않은 이름이 필요해요",
|
|
3132
|
+
"{0}: expected nonempty string <= 256 characters": "{0}: 256자 이하의 비어 있지 않은 문자열이 필요해요",
|
|
3133
|
+
"{0}: expected nonempty text <= {1}": "{0}: {1}자 이하의 비어 있지 않은 텍스트가 필요해요",
|
|
3134
|
+
"{0}: expected object": "{0}: 객체가 필요해요",
|
|
3135
|
+
"{0}: expected safe integer >= 0": "{0}: 0 이상의 안전 정수가 필요해요",
|
|
3136
|
+
"{0}: expected the producer's line or null": "{0}: 프로듀서의 출력 줄 또는 null이 필요해요",
|
|
3137
|
+
"{0}: expected {1}": "{0}: {1}이(가) 필요해요",
|
|
3138
|
+
"{0}: index {1} is past the array's {2} item(s)": "{0}: 인덱스 {1}이(가) 배열의 항목 수({2}개)를 벗어났어요",
|
|
3139
|
+
"{0}: insert_key expects {op, animation, track, time, value, curve?, ease?}": "{0}: insert_key에는 {op, animation, track, time, value, curve?, ease?}가 필요해요",
|
|
3135
3140
|
"{0}: invalid text": "{0}: 유효하지 않은 텍스트",
|
|
3136
|
-
"{0}: mesh edit needs the crop mapping": "{0}: 메시 편집에는 크롭 매핑이
|
|
3141
|
+
"{0}: mesh edit needs the crop mapping": "{0}: 메시 편집에는 크롭 매핑이 필요해요",
|
|
3137
3142
|
"{0}: model page escapes its build": "{0}: 모델 페이지가 빌드 경로를 벗어남",
|
|
3138
3143
|
"{0}: model page escapes its package": "{0}: 모델 페이지가 패키지 경로를 벗어남",
|
|
3139
3144
|
"{0}: no default-world check — {1}": "{0}: 기본 월드 검사 없음 — {1}",
|
|
3140
3145
|
"{0}: no default-world check — {1} (check a schedule of wind 1, gravity 1 for the runtime's world)": "{0}: 기본 월드 검사 없음 — {1} (런타임 월드를 위해 바람 1, 중력 1 스케줄을 검사하세요)",
|
|
3141
|
-
"{0}: no edge {1}-{2}": "{0}: 엣지 {1}-{2}이(가)
|
|
3146
|
+
"{0}: no edge {1}-{2}": "{0}: 엣지 {1}-{2}이(가) 없어요",
|
|
3142
3147
|
"{0}: no rig loaded": "{0}: 로드된 리그 없음",
|
|
3143
3148
|
"{0}: no still row": "{0}: 고정 행 없음",
|
|
3144
3149
|
"{0}: none": "{0}: 없음",
|
|
3145
3150
|
"{0}: not in check summary": "{0}: 검사 요약에 없음",
|
|
3146
3151
|
"{0}: not in check summary (the inspected build; review ran no check on it)": "{0}: 검사 요약에 없음 (점검 중인 빌드; 리뷰에서 별도 검사를 실행하지 않음)",
|
|
3147
3152
|
"{0}: op {1} {2}": "{0}: 작업 {1} {2}",
|
|
3148
|
-
"{0}: package and version are strings": "{0}: package 및 version은 문자열이어야
|
|
3153
|
+
"{0}: package and version are strings": "{0}: package 및 version은 문자열이어야 해요",
|
|
3149
3154
|
"{0}: part and regions": "{0}: 파츠 및 영역",
|
|
3150
|
-
"{0}: patch.config_sha256 is not configHash": "{0}: patch.config_sha256이 configHash와 일치하지
|
|
3155
|
+
"{0}: patch.config_sha256 is not configHash": "{0}: patch.config_sha256이 configHash와 일치하지 않아요",
|
|
3151
3156
|
"{0}: pending {1} · last evaluated {2}": "{0}: 보류 중 {1} · 마지막 평가 {2}",
|
|
3152
3157
|
"{0}: remesh.json after t {1} · revision model t {2} · overlay draws {3} triangle(s) on {4}": "{0}: remesh.json 이후 삼각형 {1} · 리비전 모델 삼각형 {2} · 오버레이가 {4}에 삼각형 {3}개를 그림",
|
|
3153
|
-
"{0}: retarget.config_sha256 is not configHash": "{0}: retarget.config_sha256이 configHash와 일치하지
|
|
3158
|
+
"{0}: retarget.config_sha256 is not configHash": "{0}: retarget.config_sha256이 configHash와 일치하지 않아요",
|
|
3154
3159
|
"{0}: select one mesh slot in the parts list": "{0}: 파츠 목록에서 메시 슬롯을 하나 선택하세요",
|
|
3155
|
-
"{0}: set_key_curve expects {op, animation, track, key, curve}": "{0}: set_key_curve에는 {op, animation, track, key, curve}가
|
|
3156
|
-
"{0}: set_key_ease expects {op, animation, track, key, ease}": "{0}: set_key_ease에는 {op, animation, track, key, ease}가
|
|
3157
|
-
"{0}: set_key_time expects {op, animation, track, key, time}": "{0}: set_key_time에는 {op, animation, track, key, time}이
|
|
3158
|
-
"{0}: set_key_value expects {op, animation, track, key, channel?, value}": "{0}: set_key_value에는 {op, animation, track, key, channel?, value}가
|
|
3159
|
-
"{0}: the compiled model document is still loading": "{0}: 컴파일된 모델 문서를 아직 불러오는
|
|
3160
|
-
"{0}: the config propose wrote differs from cloth.json outside the sections it splices, at {1}{2}; not built": "{0}: propose가 기록한 설정이 병합 대상 섹션 외부({1}{2})에서 cloth.json과 달라 빌드하지
|
|
3161
|
-
"{0}: the model document is not rigc-compiled/3": "{0}: 모델 문서가 rigc-compiled/3가
|
|
3162
|
-
"{0}: the package supplies no compiled model document (skeleton.model.json); {1} read from it": "{0}: 패키지에 컴파일된 모델 문서(skeleton.model.json)가 제공되지
|
|
3163
|
-
"{0}: the parent of {1} is not an object or array": "{0}: {1}의 부모가 객체 또는 배열이
|
|
3164
|
-
"{0}: vertex {1} ends constraint edge {2}-{3} — remove that edge first": "{0}: 정점 {1}은(는) 제약 엣지 {2}-{3}의
|
|
3165
|
-
"{0}: vertices, triangles and hull are whole numbers": "{0}: 정점, 삼각형 및 헐(hull)은 정수여야
|
|
3160
|
+
"{0}: set_key_curve expects {op, animation, track, key, curve}": "{0}: set_key_curve에는 {op, animation, track, key, curve}가 필요해요",
|
|
3161
|
+
"{0}: set_key_ease expects {op, animation, track, key, ease}": "{0}: set_key_ease에는 {op, animation, track, key, ease}가 필요해요",
|
|
3162
|
+
"{0}: set_key_time expects {op, animation, track, key, time}": "{0}: set_key_time에는 {op, animation, track, key, time}이 필요해요",
|
|
3163
|
+
"{0}: set_key_value expects {op, animation, track, key, channel?, value}": "{0}: set_key_value에는 {op, animation, track, key, channel?, value}가 필요해요",
|
|
3164
|
+
"{0}: the compiled model document is still loading": "{0}: 컴파일된 모델 문서를 아직 불러오는 중이에요",
|
|
3165
|
+
"{0}: the config propose wrote differs from cloth.json outside the sections it splices, at {1}{2}; not built": "{0}: propose가 기록한 설정이 병합 대상 섹션 외부({1}{2})에서 cloth.json과 달라 빌드하지 않았어요",
|
|
3166
|
+
"{0}: the model document is not rigc-compiled/3": "{0}: 모델 문서가 rigc-compiled/3가 아니에요",
|
|
3167
|
+
"{0}: the package supplies no compiled model document (skeleton.model.json); {1} read from it": "{0}: 패키지에 컴파일된 모델 문서(skeleton.model.json)가 제공되지 않았어요({1}에서 읽음)",
|
|
3168
|
+
"{0}: the parent of {1} is not an object or array": "{0}: {1}의 부모가 객체 또는 배열이 아니에요",
|
|
3169
|
+
"{0}: vertex {1} ends constraint edge {2}-{3} — remove that edge first": "{0}: 정점 {1}은(는) 제약 엣지 {2}-{3}의 끝점이에요 — 먼저 해당 엣지를 제거하세요",
|
|
3170
|
+
"{0}: vertices, triangles and hull are whole numbers": "{0}: 정점, 삼각형 및 헐(hull)은 정수여야 해요",
|
|
3166
3171
|
"{0}: {1} (status from check.json; check printed no line for it)": "{0}: {1} (check.json의 상태; check가 별도 줄을 출력하지 않음)",
|
|
3167
|
-
"{0}: {1} / {2} is a linked mesh without skin, slot and source": "{0}: {1} / {2}은(는) 스킨, 슬롯 및 소스가 없는 연결된
|
|
3168
|
-
"{0}: {1} entry from the handoff config. Apply sends the whole entry to remesh --mesh (one op at /meshes/{2}).": "{0}: 핸드오프 설정의 {1}
|
|
3169
|
-
"{0}: {1} is not in the config": "{0}: {1}이(가) 설정에
|
|
3170
|
-
"{0}: {1} setup geometry does not match its stored identity or vertex count": "{0}: {1} 셋업 지오메트리가 저장된 식별 정보 또는 정점 수와 일치하지
|
|
3171
|
-
"{0}: {1} setup pose draws {2} vertices; the model attachment stores {3}": "{0}: {1} 셋업 포즈는 정점 {2}개를 그리지만 모델 어태치먼트에는 {3}개가 저장되어
|
|
3172
|
-
"{0}: {1} — both cores plus 8 px must fit the centre distance minus 2 px and the bands share the rest": "{0}: {1} — 두 코어와 8 px의 합이 중심 거리에서 2 px를 뺀 값 안에 들어가야 하며 나머지를 밴드가
|
|
3173
|
-
"{0}: {1} — the record's build has sha256 {2}, the re-run wrote {3}; the predecessor cannot be restored byte for byte, so the stage stays on the last Apply": "{0}: {1} — 레코드의 빌드 해시는 sha256 {2}이나 재실행 결과는 {3}
|
|
3174
|
-
"{0}: {1}-{2} is a hull edge and cannot be removed": "{0}: {1}-{2}은(는) 헐(hull) 엣지이므로 제거할 수
|
|
3175
|
-
"{0}: {1}-{2} is a triangulation edge — the producer retriangulates; only an added constraint edge can be removed": "{0}: {1}-{2}은(는) 삼각분할
|
|
3176
|
-
"{0}: {1}-{2} is already a triangulation edge": "{0}: {1}-{2}은(는) 이미 삼각분할
|
|
3177
|
-
"{0}; the ops are a request over the original triangulation, not a mesh": "{0}; 작업 목록은 메시 자체가 아니라 원본 삼각분할에 대한
|
|
3172
|
+
"{0}: {1} / {2} is a linked mesh without skin, slot and source": "{0}: {1} / {2}은(는) 스킨, 슬롯 및 소스가 없는 연결된 메시예요",
|
|
3173
|
+
"{0}: {1} entry from the handoff config. Apply sends the whole entry to remesh --mesh (one op at /meshes/{2}).": "{0}: 핸드오프 설정의 {1} 항목이에요. 적용 시 전체 항목을 remesh --mesh로 보내요(/meshes/{2}에 대한 단일 작업).",
|
|
3174
|
+
"{0}: {1} is not in the config": "{0}: {1}이(가) 설정에 없어요",
|
|
3175
|
+
"{0}: {1} setup geometry does not match its stored identity or vertex count": "{0}: {1} 셋업 지오메트리가 저장된 식별 정보 또는 정점 수와 일치하지 않아요",
|
|
3176
|
+
"{0}: {1} setup pose draws {2} vertices; the model attachment stores {3}": "{0}: {1} 셋업 포즈는 정점 {2}개를 그리지만 모델 어태치먼트에는 {3}개가 저장되어 있어요",
|
|
3177
|
+
"{0}: {1} — both cores plus 8 px must fit the centre distance minus 2 px and the bands share the rest": "{0}: {1} — 두 코어와 8 px의 합이 중심 거리에서 2 px를 뺀 값 안에 들어가야 하며 나머지를 밴드가 나눠요",
|
|
3178
|
+
"{0}: {1} — the record's build has sha256 {2}, the re-run wrote {3}; the predecessor cannot be restored byte for byte, so the stage stays on the last Apply": "{0}: {1} — 레코드의 빌드 해시는 sha256 {2}이나 재실행 결과는 {3}이에요. 이전 상태를 바이트 단위로 복원할 수 없어 스테이지가 마지막 적용 상태를 유지해요",
|
|
3179
|
+
"{0}: {1}-{2} is a hull edge and cannot be removed": "{0}: {1}-{2}은(는) 헐(hull) 엣지이므로 제거할 수 없어요",
|
|
3180
|
+
"{0}: {1}-{2} is a triangulation edge — the producer retriangulates; only an added constraint edge can be removed": "{0}: {1}-{2}은(는) 삼각분할 엣지예요 — 프로듀서가 재삼각분할하므로 추가된 제약 엣지만 제거할 수 있어요",
|
|
3181
|
+
"{0}: {1}-{2} is already a triangulation edge": "{0}: {1}-{2}은(는) 이미 삼각분할 엣지예요",
|
|
3182
|
+
"{0}; the ops are a request over the original triangulation, not a mesh": "{0}; 작업 목록은 메시 자체가 아니라 원본 삼각분할에 대한 요청이에요",
|
|
3178
3183
|
"{0}; {1} screen-left, {2} screen-right": "{0}; 화면 왼쪽 {1}, 화면 오른쪽 {2}",
|
|
3179
3184
|
"{0}Readings of {1}: {2} · {3} s": "{0}{1} 측정: {2} · {3}초",
|
|
3180
3185
|
"{0}Readings of {1}: {2}{3}{4} · {5} s": "{0}{1} 측정: {2}{3}{4} · {5}초",
|
|
@@ -3190,9 +3195,9 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3190
3195
|
"{0}{1} · parts unavailable · {2}": "{0}{1} · 파츠 사용 불가 · {2}",
|
|
3191
3196
|
"{0}{1}build {2} (assemble → rig → check) + compile {3}": "{0}{1}빌드 {2} (assemble → rig → check) + 컴파일 {3}",
|
|
3192
3197
|
"{0}–{1} s ({2})": "{0}–{1}초 ({2})",
|
|
3193
|
-
"{0}… is not the strip on screen": "{0}…은(는) 화면에 표시된 스트립이
|
|
3194
|
-
"{0}… — the record carries no request to re-run and its build is gone": "{0}… — 레코드에 재실행 요청 정보가 없으며 해당 빌드가
|
|
3195
|
-
"{0}…{1} holds fewer than {2} distinct {3}values": "{0}…{1} 구간에 고유한 {3}값이 {2}개
|
|
3198
|
+
"{0}… is not the strip on screen": "{0}…은(는) 화면에 표시된 스트립이 아니에요",
|
|
3199
|
+
"{0}… — the record carries no request to re-run and its build is gone": "{0}… — 레코드에 재실행 요청 정보가 없으며 해당 빌드가 비워졌어요",
|
|
3200
|
+
"{0}…{1} holds fewer than {2} distinct {3}values": "{0}…{1} 구간에 고유한 {3}값이 {2}개 미만이에요",
|
|
3196
3201
|
"— / — s": "— / — 초",
|
|
3197
3202
|
"— pick a bone —": "— 본 선택 —",
|
|
3198
3203
|
"— pick —": "— 선택 —",
|
|
@@ -3206,10 +3211,10 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3206
3211
|
"Comment · C (0)": "코멘트 · C (0)",
|
|
3207
3212
|
"Comment · C ({0})": "코멘트 · C ({0})",
|
|
3208
3213
|
"Comment · C ({0}) · Rendering": "코멘트 · C ({0}) · 렌더링 중",
|
|
3209
|
-
"COMMENT_CROP_UNAVAILABLE: viewport pixel source unavailable": "COMMENT_CROP_UNAVAILABLE: 뷰포트 픽셀 소스를 사용할 수
|
|
3210
|
-
"viewport pixel source unavailable": "뷰포트 픽셀 소스를 사용할 수
|
|
3211
|
-
"COMMENT_CROP_UNAVAILABLE: mark is outside the viewport": "COMMENT_CROP_UNAVAILABLE: 표시 영역이 뷰포트 밖에
|
|
3212
|
-
"mark is outside the viewport": "표시 영역이 뷰포트 밖에
|
|
3214
|
+
"COMMENT_CROP_UNAVAILABLE: viewport pixel source unavailable": "COMMENT_CROP_UNAVAILABLE: 뷰포트 픽셀 소스를 사용할 수 없어요",
|
|
3215
|
+
"viewport pixel source unavailable": "뷰포트 픽셀 소스를 사용할 수 없어요",
|
|
3216
|
+
"COMMENT_CROP_UNAVAILABLE: mark is outside the viewport": "COMMENT_CROP_UNAVAILABLE: 표시 영역이 뷰포트 밖에 있어요",
|
|
3217
|
+
"mark is outside the viewport": "표시 영역이 뷰포트 밖에 있어요",
|
|
3213
3218
|
"COMMENT_CROP_LIMIT: mark a smaller region (PNG limit 150 KiB)": "COMMENT_CROP_LIMIT: 더 작은 영역을 표시하세요 (PNG 제한 150 KiB)",
|
|
3214
3219
|
"mark a smaller region (PNG limit 150 KiB)": "더 작은 영역을 표시하세요 (PNG 제한 150 KiB)",
|
|
3215
3220
|
"Stage comments": "스테이지 코멘트",
|
|
@@ -3219,7 +3224,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3219
3224
|
"close the active editor or wait for the inspection to settle": "활성 편집기를 닫거나 점검이 안정될 때까지 기다리세요",
|
|
3220
3225
|
"Comments ({0})": "코멘트 ({0})",
|
|
3221
3226
|
"Comments (0)": "코멘트 (0)",
|
|
3222
|
-
"Frame ranges require an explicit producer frame. Leave both fields empty for this seconds-only comment.": "프레임 범위에는 명시적 프로듀서 프레임이
|
|
3227
|
+
"Frame ranges require an explicit producer frame. Leave both fields empty for this seconds-only comment.": "프레임 범위에는 명시적 프로듀서 프레임이 필요해요. 초 기준 코멘트는 두 필드를 비워 두세요.",
|
|
3223
3228
|
"Exact correction text (UTF-8 file)": "정확한 수정 문구 (UTF-8 파일)",
|
|
3224
3229
|
"Add correction": "수정 기록 추가",
|
|
3225
3230
|
"Check the parts and meshes.": "파츠와 메시를 확인해 주세요.",
|
|
@@ -3237,15 +3242,15 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3237
3242
|
"Comment text": "코멘트 내용",
|
|
3238
3243
|
"Describe this spot…": "이 지점에 대해 설명하세요…",
|
|
3239
3244
|
"Enter saves · Escape cancels": "Enter로 저장 · Escape로 취소",
|
|
3240
|
-
"COMMENT_SUBMITTED: submitted evidence is immutable": "COMMENT_SUBMITTED: 제출된 근거 데이터는 변경할 수
|
|
3241
|
-
"submitted evidence is immutable": "제출된 근거 데이터는 변경할 수
|
|
3242
|
-
"COMMENT_FRAME_UNAVAILABLE: no explicit frame index": "COMMENT_FRAME_UNAVAILABLE: 명시적 프레임 인덱스가
|
|
3243
|
-
"no explicit frame index": "명시적 프레임 인덱스가
|
|
3245
|
+
"COMMENT_SUBMITTED: submitted evidence is immutable": "COMMENT_SUBMITTED: 제출된 근거 데이터는 변경할 수 없어요",
|
|
3246
|
+
"submitted evidence is immutable": "제출된 근거 데이터는 변경할 수 없어요",
|
|
3247
|
+
"COMMENT_FRAME_UNAVAILABLE: no explicit frame index": "COMMENT_FRAME_UNAVAILABLE: 명시적 프레임 인덱스가 없어요",
|
|
3248
|
+
"no explicit frame index": "명시적 프레임 인덱스가 없어요",
|
|
3244
3249
|
"COMMENT_FRAME_UNAVAILABLE: provide an explicit producer clock or a decoded reference frame index": "COMMENT_FRAME_UNAVAILABLE: 명시적 프로듀서 클럭 또는 디코딩된 레퍼런스 프레임 인덱스를 제공하세요",
|
|
3245
3250
|
"provide an explicit producer clock or a decoded reference frame index": "명시적 프로듀서 클럭 또는 디코딩된 레퍼런스 프레임 인덱스를 제공하세요",
|
|
3246
3251
|
"Comment {0}: {1}": "코멘트 {0}: {1}",
|
|
3247
3252
|
"Comment {0}:": "코멘트 {0}:",
|
|
3248
|
-
"{0} s (seconds basis) · frame is unavailable: no explicit producer frame index at this time (COMMENT_FRAME_UNAVAILABLE)": "{0}초 (초 기준) · 프레임을 사용할 수 없음: 현재 시간에 명시적 프로듀서 프레임 인덱스가
|
|
3253
|
+
"{0} s (seconds basis) · frame is unavailable: no explicit producer frame index at this time (COMMENT_FRAME_UNAVAILABLE)": "{0}초 (초 기준) · 프레임을 사용할 수 없음: 현재 시간에 명시적 프로듀서 프레임 인덱스가 없어요 (COMMENT_FRAME_UNAVAILABLE)",
|
|
3249
3254
|
"{0} split at": "{0} 분할 지점(split at)",
|
|
3250
3255
|
"{0} split into": "{0} 분할 개수(split into)",
|
|
3251
3256
|
"{0} hold tip": "{0} 팁 고정(hold tip)",
|
|
@@ -3293,7 +3298,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3293
3298
|
"absent": "없음",
|
|
3294
3299
|
"front": "앞",
|
|
3295
3300
|
"back": "뒤",
|
|
3296
|
-
"@rig-c/pose is not installed beside the package or beside review, and review does not install it — bun add -d @rig-c/pose": "패키지 또는 리뷰 옆에 @rig-c/pose가 설치되어 있지 않으며 리뷰가 직접 설치하지
|
|
3301
|
+
"@rig-c/pose is not installed beside the package or beside review, and review does not install it — bun add -d @rig-c/pose": "패키지 또는 리뷰 옆에 @rig-c/pose가 설치되어 있지 않으며 리뷰가 직접 설치하지 않아요 — bun add -d @rig-c/pose",
|
|
3297
3302
|
"CHEST_REGION_VALUE_INVALID contour tolerance": "CHEST_REGION_VALUE_INVALID: 윤곽 허용 오차(contour tolerance)",
|
|
3298
3303
|
"● R · character's right (image left)": "● R · 캐릭터 오른쪽(화면 왼쪽)",
|
|
3299
3304
|
"● L · character's left (image right)": "● L · 캐릭터 왼쪽(화면 오른쪽)",
|
|
@@ -3304,31 +3309,31 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3304
3309
|
"Left apex (character's left, image right), Cleavage": "왼쪽 정점(캐릭터 기준, 화면 오른쪽), 골(Cleavage)",
|
|
3305
3310
|
"Right apex (character's right, image left), Cleavage": "오른쪽 정점(캐릭터 기준, 화면 왼쪽), 골(Cleavage)",
|
|
3306
3311
|
"Right apex (character's right, image left), Left apex (character's left, image right)": "오른쪽 정점(캐릭터 기준, 화면 왼쪽), 왼쪽 정점(캐릭터 기준, 화면 오른쪽)",
|
|
3307
|
-
"Click the part to place the right apex (character's right, image left); drag its marker to move it": "파츠를 클릭해 오른쪽 정점(캐릭터 기준, 화면 왼쪽)을 배치하고, 마커를 드래그해
|
|
3308
|
-
"Click the part to place the left apex (character's left, image right); drag its marker to move it": "파츠를 클릭해 왼쪽 정점(캐릭터 기준, 화면 오른쪽)을 배치하고, 마커를 드래그해
|
|
3309
|
-
"Copy R's y, core radius and band to L (leaves L's x as is)": "R의 y, 중심 반경(r), 밴드를 L에
|
|
3312
|
+
"Click the part to place the right apex (character's right, image left); drag its marker to move it": "파츠를 클릭해 오른쪽 정점(캐릭터 기준, 화면 왼쪽)을 배치하고, 마커를 드래그해 이동해요",
|
|
3313
|
+
"Click the part to place the left apex (character's left, image right); drag its marker to move it": "파츠를 클릭해 왼쪽 정점(캐릭터 기준, 화면 오른쪽)을 배치하고, 마커를 드래그해 이동해요",
|
|
3314
|
+
"Copy R's y, core radius and band to L (leaves L's x as is)": "R의 y, 중심 반경(r), 밴드를 L에 복사해요(L의 x는 유지)",
|
|
3310
3315
|
"Y·size symmetry": "Y·크기 대칭",
|
|
3311
3316
|
"view only, no producer handoff": "뷰 전용, 프로듀서 핸드오프 없음",
|
|
3312
|
-
"Page {name}: {width}×{height} px, {count} regions. The background shows through padding; a region box is the packer's, and pixels outside it are bleed.": "페이지 {name}: {width}×{height} px, 영역 {count}개. 패딩에는 배경이 비쳐 보이고, 영역 상자는 패커가 정한 것이며 상자 밖의 픽셀은
|
|
3317
|
+
"Page {name}: {width}×{height} px, {count} regions. The background shows through padding; a region box is the packer's, and pixels outside it are bleed.": "페이지 {name}: {width}×{height} px, 영역 {count}개. 패딩에는 배경이 비쳐 보이고, 영역 상자는 패커가 정한 것이며 상자 밖의 픽셀은 블리드예요.",
|
|
3313
3318
|
"Region {name} on {page} at {x},{y}, {width}×{height} px, with {margin} px of the page around it (dashed: the region box).": "{page}의 영역 {name}: {x},{y} 위치, {width}×{height} px, 주변 페이지 {margin} px 포함(점선: 영역 상자).",
|
|
3314
3319
|
"Packed at {degrees}°.": "{degrees}° 회전되어 패킹됨.",
|
|
3315
3320
|
"{name}: {width}×{height} px at {x},{y} in rig px, draw order {order} of {count}.": "{name}: {width}×{height} px, 리그 px 기준 {x},{y} 위치, 그리기 순서 {count}개 중 {order}번째.",
|
|
3316
3321
|
"Tinted: the footprints of {count} parts drawn in front ({names}).": "색칠된 부분: 앞에 그려지는 파츠 {count}개의 풋프린트({names}).",
|
|
3317
|
-
"No part is drawn in front of it.": "이 파츠 앞에 그려지는 파츠가
|
|
3322
|
+
"No part is drawn in front of it.": "이 파츠 앞에 그려지는 파츠가 없어요.",
|
|
3318
3323
|
"Faint island left out of the mesh: {art} px, brightest alpha {alpha}, at {x},{y} {width}×{height} (part-image px).": "메시에서 빠진 희미한 섬: {art} px, 최대 알파 {alpha}, 위치 {x},{y} {width}×{height}(파츠 이미지 px).",
|
|
3319
3324
|
"Read from: {files}.": "읽은 파일: {files}.",
|
|
3320
3325
|
"Not found: {files}.": "찾지 못함: {files}.",
|
|
3321
|
-
"Occlusion coverage is not read yet: the producer does not write it.": "가림 커버리지는 아직 읽지
|
|
3326
|
+
"Occlusion coverage is not read yet: the producer does not write it.": "가림 커버리지는 아직 읽지 않아요: 프로듀서가 아직 쓰지 않아요.",
|
|
3322
3327
|
"Clean": "이상 없음",
|
|
3323
3328
|
"Flagged": "문제 있음",
|
|
3324
3329
|
"Saved {file}: source {hash}.": "{file} 저장됨: 소스 {hash}.",
|
|
3325
|
-
"Save failed.": "저장하지
|
|
3326
|
-
"Load failed.": "불러오지
|
|
3330
|
+
"Save failed.": "저장하지 못했어요.",
|
|
3331
|
+
"Load failed.": "불러오지 못했어요.",
|
|
3327
3332
|
"Parts package, before rigging": "파츠 패키지, 리깅 전",
|
|
3328
3333
|
"Atlas of a built rig": "빌드된 리그의 아틀라스",
|
|
3329
|
-
"A saved sign-off was made on other files; this review starts fresh.": "저장된 승인은 다른 파일에 대해 내려진 것이라, 이번 검수는 처음부터
|
|
3330
|
-
"Saved sign-off loaded.": "저장된 승인을
|
|
3331
|
-
"Footprints need a parts package: atlas regions carry no rig placement.": "풋프린트에는 파츠 패키지가
|
|
3334
|
+
"A saved sign-off was made on other files; this review starts fresh.": "저장된 승인은 다른 파일에 대해 내려진 것이라, 이번 검수는 처음부터 시작해요.",
|
|
3335
|
+
"Saved sign-off loaded.": "저장된 승인을 불러왔어요.",
|
|
3336
|
+
"Footprints need a parts package: atlas regions carry no rig placement.": "풋프린트에는 파츠 패키지가 필요해요: 아틀라스 영역에는 리그 배치가 없어요.",
|
|
3332
3337
|
"Parts": "파츠",
|
|
3333
3338
|
"Zoom": "확대",
|
|
3334
3339
|
"Atlas view": "아틀라스 보기",
|
|
@@ -3361,8 +3366,8 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3361
3366
|
"mesh {mesh} · check {check}": "메시 {mesh} · 체크 {check}",
|
|
3362
3367
|
"mesh {mesh}": "메시 {mesh}",
|
|
3363
3368
|
"check {check}": "체크 {check}",
|
|
3364
|
-
"Grouped by source and producer root; counts are rows, not a classification of defects.": "출처와 프로듀서 루트별로
|
|
3365
|
-
"Page {name}: {width}×{height} px, 1 region. The background shows through padding; a region box is the packer's, and pixels outside it are bleed.": "페이지 {name}: {width}×{height} px, 영역 1개. 패딩에는 배경이 비쳐 보이고, 영역 상자는 패커가 정한 것이며 상자 밖의 픽셀은
|
|
3369
|
+
"Grouped by source and producer root; counts are rows, not a classification of defects.": "출처와 프로듀서 루트별로 묶었어요. 수치는 행 수이며 결함 분류가 아니에요.",
|
|
3370
|
+
"Page {name}: {width}×{height} px, 1 region. The background shows through padding; a region box is the packer's, and pixels outside it are bleed.": "페이지 {name}: {width}×{height} px, 영역 1개. 패딩에는 배경이 비쳐 보이고, 영역 상자는 패커가 정한 것이며 상자 밖의 픽셀은 블리드예요.",
|
|
3366
3371
|
"Tinted: the footprint of the part drawn in front ({names}).": "색칠된 부분: 앞에 그려지는 파츠의 풋프린트({names}).",
|
|
3367
3372
|
"mesh from rig.json UVs": "rig.json UV로 계산한 메시",
|
|
3368
3373
|
"Mesh geometry": "메시 형상",
|
|
@@ -3372,7 +3377,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3372
3377
|
"Mesh note": "메시 메모",
|
|
3373
3378
|
"1:1": "1:1",
|
|
3374
3379
|
"Export issue": "이슈 내보내기",
|
|
3375
|
-
"PARTS_COMMENT_UNAVAILABLE: original part image required": "PARTS_COMMENT_UNAVAILABLE: 원본 파츠 이미지가
|
|
3380
|
+
"PARTS_COMMENT_UNAVAILABLE: original part image required": "PARTS_COMMENT_UNAVAILABLE: 원본 파츠 이미지가 필요해요",
|
|
3376
3381
|
"PARTS_REFERENCE_UNAVAILABLE: supply --painting to compare the original painting": "PARTS_REFERENCE_UNAVAILABLE: 원화 비교에는 --painting 입력이 필요해요",
|
|
3377
3382
|
"PARTS_COMMENT_STALE_SOURCE: reopen the bound source": "PARTS_COMMENT_STALE_SOURCE: 연결된 원본을 다시 열어 주세요",
|
|
3378
3383
|
"PARTS_COMMENT_STALE_SOURCE: original PNG changed": "PARTS_COMMENT_STALE_SOURCE: 원본 PNG가 변경됐어요",
|
|
@@ -3402,7 +3407,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3402
3407
|
"Overlay": "오버레이",
|
|
3403
3408
|
"Part opacity": "파츠 불투명도",
|
|
3404
3409
|
"PARTS_COMPARISON_UNAVAILABLE: original painting required": "PARTS_COMPARISON_UNAVAILABLE: 원본 원화가 필요해요",
|
|
3405
|
-
"PARTS_COMPARISON_INVALID: part/overlay mode and opacity 0..1 required": "PARTS_COMPARISON_INVALID: 파츠/오버레이 모드와 0..1 불투명도가
|
|
3410
|
+
"PARTS_COMPARISON_INVALID: part/overlay mode and opacity 0..1 required": "PARTS_COMPARISON_INVALID: 파츠/오버레이 모드와 0..1 불투명도가 필요해요",
|
|
3406
3411
|
"PARTS_PAINT_FAILED: view could not be rendered; select the part to retry": "PARTS_PAINT_FAILED: 화면을 그리지 못했어요. 파츠를 선택해 다시 시도해 주세요",
|
|
3407
3412
|
"Assembled": "조립 보기",
|
|
3408
3413
|
"Visible": "표시",
|
|
@@ -3442,23 +3447,23 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3442
3447
|
"job.binding": "표시된 소스 연결 정보",
|
|
3443
3448
|
"job.cameraSync": "카메라 동기화",
|
|
3444
3449
|
// English source aliases for the shared inspection DOM localizer.
|
|
3445
|
-
"This job was explicitly closed.": "이 작업은 명시적으로
|
|
3446
|
-
"The next result could not be displayed. The previous result is still shown.": "다음 결과를 표시하지
|
|
3447
|
-
"The previous selection is unavailable in this result.": "이 결과에서 이전 선택 항목을 사용할 수
|
|
3450
|
+
"This job was explicitly closed.": "이 작업은 명시적으로 종료됐어요.",
|
|
3451
|
+
"The next result could not be displayed. The previous result is still shown.": "다음 결과를 표시하지 못했어요. 이전 결과를 계속 표시해요.",
|
|
3452
|
+
"The previous selection is unavailable in this result.": "이 결과에서 이전 선택 항목을 사용할 수 없어요.",
|
|
3448
3453
|
"Human action saved.": "사용자 작업을 저장했어요.",
|
|
3449
|
-
"Updated from {0} to {1}.": "{0}에서 {1}(으)로
|
|
3454
|
+
"Updated from {0} to {1}.": "{0}에서 {1}(으)로 업데이트됐어요.",
|
|
3450
3455
|
"Approved · Next step": "승인됨 · 다음 단계",
|
|
3451
3456
|
"Reviewing · {0} issues": "검수 중 · 이슈 {0}",
|
|
3452
3457
|
"Sending": "보내는 중",
|
|
3453
3458
|
"Changes requested · Waiting for a new draft": "수정 요청 보냄 · 새 드래프트 대기 중",
|
|
3454
|
-
"job.closed": "이 작업은 명시적으로
|
|
3459
|
+
"job.closed": "이 작업은 명시적으로 종료됐어요.",
|
|
3455
3460
|
"job.fail": "실패",
|
|
3456
|
-
"job.failed": "다음 결과를 표시하지
|
|
3457
|
-
"job.incompatible": "이 결과에서 이전 선택 항목을 사용할 수
|
|
3458
|
-
"job.metadata": "연출 메타데이터만
|
|
3461
|
+
"job.failed": "다음 결과를 표시하지 못했어요. 이전 결과를 계속 표시해요.",
|
|
3462
|
+
"job.incompatible": "이 결과에서 이전 선택 항목을 사용할 수 없어요.",
|
|
3463
|
+
"job.metadata": "연출 메타데이터만 표시해요.",
|
|
3459
3464
|
"job.pending": "대기 중인 사용자 작업",
|
|
3460
|
-
"job.preparing": "다음 결과를 준비하고
|
|
3461
|
-
"job.retained": "이 초안은 {0}에
|
|
3465
|
+
"job.preparing": "다음 결과를 준비하고 있어요.",
|
|
3466
|
+
"job.retained": "이 초안은 {0}에 속해요. 원래 소스에 연결된 채로 보관돼요.",
|
|
3462
3467
|
"job.saveCheckpoint": "체크포인트 결과 저장",
|
|
3463
3468
|
"job.savePartsVerdict": "파츠 판정 저장",
|
|
3464
3469
|
"job.saved": "사용자 작업을 저장했어요.",
|
|
@@ -3468,8 +3473,8 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3468
3473
|
"job.reopen": "단계 다시 열기",
|
|
3469
3474
|
"job.time": "검사 시간 (초)",
|
|
3470
3475
|
"job.title": "실시간 리뷰 작업",
|
|
3471
|
-
"job.updated": "{0}에서 {1}(으)로
|
|
3472
|
-
"job.waiting": "게시된 결과를 기다리고
|
|
3476
|
+
"job.updated": "{0}에서 {1}(으)로 업데이트됐어요.",
|
|
3477
|
+
"job.waiting": "게시된 결과를 기다리고 있어요.",
|
|
3473
3478
|
"job.wholeRig": "전체 리그",
|
|
3474
3479
|
"job.zoomIn": "확대",
|
|
3475
3480
|
"job.zoomOut": "축소",
|
|
@@ -3482,7 +3487,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3482
3487
|
"job.checkpointTable": "분류 표",
|
|
3483
3488
|
"job.checkpointRoutes": "경로",
|
|
3484
3489
|
"job.checkpointRecommendation": "권고",
|
|
3485
|
-
"job.checkpointRouteMapping": "통과는 열린 부분을 수용하는 경로 (i)를
|
|
3490
|
+
"job.checkpointRouteMapping": "통과는 열린 부분을 수용하는 경로 (i)를 선택해요. 실패와 소유자가 작성한 말은 (ii) 또는 (iii)를 선택해요.",
|
|
3486
3491
|
"CHECKPOINT_EVIDENCE_INVALID": "CHECKPOINT_EVIDENCE_INVALID",
|
|
3487
3492
|
"CHECKPOINT_EVIDENCE_HASH_MISMATCH": "CHECKPOINT_EVIDENCE_HASH_MISMATCH",
|
|
3488
3493
|
"CHECKPOINT_EVIDENCE_PNG_INVALID": "CHECKPOINT_EVIDENCE_PNG_INVALID",
|
|
@@ -3524,7 +3529,7 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3524
3529
|
"JOB_PUBLICATION_UNKNOWN": "JOB_PUBLICATION_UNKNOWN",
|
|
3525
3530
|
"JOB_SNAPSHOT_RECLAIMED": "JOB_SNAPSHOT_RECLAIMED",
|
|
3526
3531
|
"JOB_RECORD_INCOMPLETE": "JOB_RECORD_INCOMPLETE",
|
|
3527
|
-
"JOB_RECORD_MOVED": "
|
|
3532
|
+
"JOB_RECORD_MOVED": "이 페이지를 연 뒤 리뷰가 업데이트됐어요. 페이지를 새로고침하거나 담당자가 리뷰를 다시 열 때까지 기다려 주세요.",
|
|
3528
3533
|
"JOB_REQUEST_INVALID": "JOB_REQUEST_INVALID",
|
|
3529
3534
|
"JOB_API_SCHEMA_MISMATCH": "JOB_API_SCHEMA_MISMATCH",
|
|
3530
3535
|
"JOB_STORED_SCHEMA_MISMATCH": "JOB_STORED_SCHEMA_MISMATCH",
|
|
@@ -3568,10 +3573,10 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3568
3573
|
"REFERENCE_OUT_OF_DOMAIN": "REFERENCE_OUT_OF_DOMAIN",
|
|
3569
3574
|
" · installed {0} {1} · {2} {3}": " · 설치됨 {0} {1} · {2} {3}",
|
|
3570
3575
|
"Draft {0} ({1} {2}): {3} sha256 {4}… · parts {5}{6}": "초안 {0} ({1} {2}): {3} sha256 {4}… · 파츠 {5}{6}",
|
|
3571
|
-
"PARTS_VERDICT_READ_ONLY: Stage 1 draft is inspection-only": "PARTS_VERDICT_READ_ONLY: 1단계 초안은 살펴보기
|
|
3576
|
+
"PARTS_VERDICT_READ_ONLY: Stage 1 draft is inspection-only": "PARTS_VERDICT_READ_ONLY: 1단계 초안은 살펴보기 전용이에요",
|
|
3572
3577
|
"PARTS_VERDICT_LEGACY_FORMAT": "PARTS_VERDICT_LEGACY_FORMAT",
|
|
3573
3578
|
"JOB_PANEL_UNKNOWN: {0}": "JOB_PANEL_UNKNOWN: {0}",
|
|
3574
|
-
"STAGE_DRAFT_OPERATION: only applied mesh corrections belong to this inspection": "STAGE_DRAFT_OPERATION: 이 점검에서는 적용된 메시 보정만
|
|
3579
|
+
"STAGE_DRAFT_OPERATION: only applied mesh corrections belong to this inspection": "STAGE_DRAFT_OPERATION: 이 점검에서는 적용된 메시 보정만 지원해요",
|
|
3575
3580
|
"JOB_PANELS_INVALID": "JOB_PANELS_INVALID · 게시 데이터에 맞는 기본 패널 구성을 사용해요.",
|
|
3576
3581
|
"JOB_PANEL_UNKNOWN": "JOB_PANEL_UNKNOWN · 알 수 없는 컴포넌트 {0}.",
|
|
3577
3582
|
"JOB_PANEL_OUTPUT_MISSING": "JOB_PANEL_OUTPUT_MISSING · 제출에 필요한 컴포넌트 출력이 없어요.",
|
|
@@ -3587,12 +3592,12 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3587
3592
|
"job.parts.approved": "파츠 단계 승인 완료 · 다음은 리깅 인터뷰",
|
|
3588
3593
|
"job.parts.retry-signoff": "파츠 판정 저장됨 · 단계 서명 재시도 필요",
|
|
3589
3594
|
"PARTS_COMMENT_STALE_SOURCE": "PARTS_COMMENT_STALE_SOURCE · 이슈 출처와 원본 증거에 묶인 출처가 달라요.",
|
|
3590
|
-
"PARTS_WORKSPACE_NODE_REQUIRED: {0}": "PARTS_WORKSPACE_NODE_REQUIRED: 작업 공간 요소 {0}이(가)
|
|
3591
|
-
"PARTS_WORKSPACE_NODE_REQUIRED: stage-comment": "PARTS_WORKSPACE_NODE_REQUIRED: 코멘트 버튼이
|
|
3592
|
-
"PARTS_WORKSPACE_SLOT_REQUIRED": "PARTS_WORKSPACE_SLOT_REQUIRED · 작업 공간 슬롯이
|
|
3593
|
-
"PARTS_WORKSPACE_DOCUMENT_REQUIRED": "PARTS_WORKSPACE_DOCUMENT_REQUIRED · 같은 문서의 작업 공간 슬롯이
|
|
3594
|
-
"PARTS_WORKSPACE_DISPOSED": "PARTS_WORKSPACE_DISPOSED · 첫 화면을 그리기 전에 파츠 작업 공간이
|
|
3595
|
-
"PARTS_JOINED_ISSUE_UNSUPPORTED": "PARTS_JOINED_ISSUE_UNSUPPORTED · 이슈는 상시 잡 리뷰 경로(/jobs/<jobId>/)에서 등록해 주세요. 연결된 점검 페이지에서는 이슈 없는 승인을
|
|
3595
|
+
"PARTS_WORKSPACE_NODE_REQUIRED: {0}": "PARTS_WORKSPACE_NODE_REQUIRED: 작업 공간 요소 {0}이(가) 필요해요.",
|
|
3596
|
+
"PARTS_WORKSPACE_NODE_REQUIRED: stage-comment": "PARTS_WORKSPACE_NODE_REQUIRED: 코멘트 버튼이 필요해요.",
|
|
3597
|
+
"PARTS_WORKSPACE_SLOT_REQUIRED": "PARTS_WORKSPACE_SLOT_REQUIRED · 작업 공간 슬롯이 필요해요.",
|
|
3598
|
+
"PARTS_WORKSPACE_DOCUMENT_REQUIRED": "PARTS_WORKSPACE_DOCUMENT_REQUIRED · 같은 문서의 작업 공간 슬롯이 필요해요.",
|
|
3599
|
+
"PARTS_WORKSPACE_DISPOSED": "PARTS_WORKSPACE_DISPOSED · 첫 화면을 그리기 전에 파츠 작업 공간이 닫혔어요.",
|
|
3600
|
+
"PARTS_JOINED_ISSUE_UNSUPPORTED": "PARTS_JOINED_ISSUE_UNSUPPORTED · 이슈는 상시 잡 리뷰 경로(/jobs/<jobId>/)에서 등록해 주세요. 연결된 점검 페이지에서는 이슈 없는 승인을 지원해요.",
|
|
3596
3601
|
"Issues": "이슈",
|
|
3597
3602
|
"No comments yet.": "아직 코멘트가 없어요.",
|
|
3598
3603
|
"Assembled parts": "조립된 파츠",
|
|
@@ -3611,8 +3616,8 @@ export const koCatalog: Readonly<Record<string, string>> = {
|
|
|
3611
3616
|
"Select a part to inspect its original image source.": "파츠를 선택하여 원본 이미지 출처를 확인하세요.",
|
|
3612
3617
|
"Parts raster drawn · Canvas2D": "파츠 래스터 그려짐 · Canvas2D",
|
|
3613
3618
|
"Parts images · no compiled rig loaded": "파츠 이미지 · 컴파일된 리그 로드 안 됨",
|
|
3614
|
-
"Parts ready. Source files remain unchanged.": "파츠 준비 완료. 원본 파일은 변경되지
|
|
3615
|
-
"This request has no picture.": "이 요청에는 그림이
|
|
3619
|
+
"Parts ready. Source files remain unchanged.": "파츠 준비 완료. 원본 파일은 변경되지 않아요.",
|
|
3620
|
+
"This request has no picture.": "이 요청에는 그림이 없어요.",
|
|
3616
3621
|
"The selected part has no chest regions. The chest editor keeps its current part.": "선택한 파츠에는 가슴 영역이 없어요. 가슴 편집기는 지금 파츠를 그대로 둬요.",
|
|
3617
3622
|
'Resize comment area: {0}': '코멘트 영역 크기를 조절해요: {0}',
|
|
3618
3623
|
};
|