rig-parts 1.74.0 → 1.74.1

package/NOTICE.md

@@ -59,7 +59,7 @@ from them beyond the layers See-through itself writes for the user's own image.
 
 ## 2. Spine Runtimes, through rig-c
 
-rig-parts depends on [`rig-c`](https://www.npmjs.com/package/rig-c)
+rig-parts depends on [`@rig-c/core`](https://www.npmjs.com/package/@rig-c/core)
 (MIT, same author), which compiles and validates Spine skeleton data. Its round
 trip runs through `@esotericsoftware/spine-core`, part of the
 [Spine Runtimes](https://github.com/EsotericSoftware/spine-runtimes), under the
@@ -158,7 +158,7 @@ function's comment says which call it stands in for and what was measured.
 
 | Package | Licence | Why |
 | --- | --- | --- |
-| [`rig-c`](https://www.npmjs.com/package/rig-c) | MIT | compile, gate, render and check; its PNG codec, font and coordinate conversion |
+| [`@rig-c/core`](https://www.npmjs.com/package/@rig-c/core) | MIT | compile, gate, render and check; its PNG codec, font and coordinate conversion |
 | [`ag-psd`](https://www.npmjs.com/package/ag-psd) | MIT | reading an upstream See-through `.psd` |
 | ↳ [`pako`](https://www.npmjs.com/package/pako) | MIT AND Zlib | ag-psd's deflate |
 | ↳ [`base64-js`](https://www.npmjs.com/package/base64-js) | MIT | ag-psd's base64 |

package/README.md

@@ -157,7 +157,7 @@ atlas written by anything else would have no oracle behind it.
 | stage | tool | what it owns |
 | --- | --- | --- |
 | painting + See-through layers → parts and specs | **rig-parts** (npm `@rig-c/parts`) | the merge of two runs, the measurements, the rig spec and motion spec |
-| specs → Spine skeleton data | **[@rig-c/core](https://github.com/rig-c/core)** (canonical npm `@rig-c/core`; this package's dependency is literally `rig-c`) | compile, the gate (rigc's own validator in an install; the round trip through `spine-core` where the runtime is beside it, as in this repository's CI), the named assertions, the packer, the renderer |
+| specs → Spine skeleton data | **[@rig-c/core](https://github.com/rig-c/core)** (npm dependency `@rig-c/core`) | compile, the gate (rigc's own validator in an install; the round trip through `spine-core` where the runtime is beside it, as in this repository's CI), the named assertions, the packer, the renderer |
 | skeleton data → a page | **[rig-play](https://github.com/rig-c/play)** (npm `@rig-c/play`; formerly spine-html), a sibling project | a DOM renderer; rigc's `rig-play` profile is its policy, and every build here is gated under that profile as well as under `spine` |
 
 rig-parts never writes Spine data itself. Everything on disk under `check/build/`

package/docs/AUTHORING.md

@@ -41,7 +41,7 @@ with `flattenRig(built)`, not with the built file.
 | what | why | how |
 | --- | --- | --- |
 | [Bun](https://bun.sh) 1.2 or later | rig-parts and rig-c are Bun programs | `npm install -g @rig-c/parts` installs the command; it says so if Bun is missing |
-| [@rig-c/core](https://www.npmjs.com/package/@rig-c/core) | compiles, gates, packs and renders every rig; rig-parts writes no Spine data itself | installed with rig-parts as the literal dependency `rig-c` (`node_modules/.bin/rigc`); with no Spine runtime beside it, it gates with its own validator, and `rigc --version` says `entry: cli_core.ts` |
+| [@rig-c/core](https://www.npmjs.com/package/@rig-c/core) | compiles, gates, packs and renders every rig; rig-parts writes no Spine data itself | installed with rig-parts as the dependency `@rig-c/core` (`node_modules/.bin/rigc`); with no Spine runtime beside it, it gates with its own validator, and `rigc --version` says `entry: cli_core.ts` |
 | [See-through](https://github.com/shitagaki-lab/see-through), somewhere | the layer decomposition is the input | any route in README *Getting See-through layers*; it runs twice per character, outside this tool |
 | a GPU, wherever See-through runs | See-through is a diffusion model | nothing in rig-parts itself uses a GPU |
 
@@ -135,7 +135,7 @@ read by no CPU stage).
 | `motion.blink.still` | rig | **proposed** only for a lash `propose` notes (below), then checked: `{<part>: {row, bone}}` — the rows of that region part above `row` (rig px, y down) are drawn by a second slot `<part>_still` on `bone` and do not blink; rows from `row` down keep the part's slot and blink. The part must be a region on a bone `eyes` names, `bone` one it does not (`CONFIG_STILL_OFF_THE_BLINK`), and `row` a row of the part with no art across its whole width (`RIG_STILL_ROW_CLEAR`) |
 | `motion.animations_from` | rig; check (named; read for folds) | optional, never proposed (issue #183): a path, relative to the config file's directory, to a file in rig-c's motion-spec shape, `{"spec": "rigc-motion/1", "animations": {"<name>": {"duration": …, "tracks": [...]}, …}}` — an expression, a gesture, anything beside the idle. On every `rig` and `build` each of its animations is written into `rig/motion.json` after `idle`, as read: nothing added, re-keyed or judged here (except `derive` keys on `turn`/`tilt`, issue #436, and `{"t": …, "set": "<name>" \| null}` keys on slot `"attachment"` tracks, issue #473, which expand to `"v": "<set>_<slot>"` or `"v": null` when the set hides the slot, or `"v": "<slot>"` for `null`, refused with `CONFIG_SET_COVERS_SLOT` when the set is undeclared or does not cover the track's slot), and each is rigc's to accept or refuse at the rig stage's gate, in rigc's words. It may name what `motion.json` already holds — the bones `bones` declares, the easings `shut` and `open`, the groups `eyes` and `brows` when the blink writes them — and nothing else from the file reaches it. The loader refuses, every problem at once: no such file or one that cannot be read (`CONFIG_FILE_PRESENT`), text that is not JSON (`CONFIG_IS_JSON`), a file that is not an object, a `spec` other than `"rigc-motion/1"`, an `animations` that is not a table of objects (`CONFIG_FIELD_TYPE`), any other key — rig-c's `easings`, `groups`, `setup`, `physics`, `mix`, `archetype` and `cut` included, which would be read and not written (`CONFIG_KEY_KNOWN`), an animation named `idle` (`CONFIG_ANIMATION_NAME_FREE`), and a key written twice in one object of the file, which JSON would fold into its last value without a word (`CONFIG_KEY_UNIQUE`). `check` names the others on one line (`beside the idle: …`) and reads each for folds, with the idle — `ANIMATIONS_DO_NOT_FOLD` (§7, issues #320, #333); every other bar reads the idle. Absent, `motion.json` holds the idle alone, byte for byte as before, and `check` reads that idle for folds |
 | `constraints` | rig (handed to rig-c as `rig.json`'s `constraints`); `compare` and the coverage lines (roles) | **authored**, optional; `propose` writes none, but with `--cloth` (issue #364), where it writes the recipe's physics and swing transforms (*Recipe: cloth and hair that answer the world*, below). A list of constraints in **rig-c's own rig-spec shape** (`RigConstraint`: `ik`, `transform`, `path`, `physics`, `slider` — rig-c's `src/rig.ts` documents every field), in the order rigc applies them. The loader checks only what this package owns: each entry is an object with a `type` rigc names (`CONFIG_CONSTRAINT_TYPE_KNOWN`) and a non-empty `name`, unique within its kind as rigc finds constraints (`CONFIG_CONSTRAINT_NAME_UNIQUE`; an ik and a transform may share one); every bone it names — `bones`, an ik's `target`, a transform's `source`, a physics or slider constraint's `bone` — is a bone `bones` declares, a chain link as `<chain><i>` (`CONFIG_NAME_RESOLVES`); the bone a constraint follows does not sit under a bone it drives (`CONFIG_CONSTRAINT_TARGET_DETACHED`). Every other field (`mix`, `softness`, `properties`, a path's `slot`, a slider's `animation`) and every value is rigc's to accept or refuse at the rig stage's gate, in rigc's words (`RIG_RIGC_GREEN`) — an ik's `bones` as a shape too: from rig-c 2.15.0 rigc refuses an ik over more than two bones, or over a pair whose second bone is not the first's child (issue #103; this loader refused both itself until then). A note and an `x-` record may ride on an entry; the rig stage leaves them out of what it hands rigc. Under the default `--idle-keys ctl` a two-bone ik whose child link the idle keys is split by that link's control, and rigc refuses the pair: run `rig --idle-keys direct` or `build --idle-keys direct` (the rig stage adds that sentence, naming the flag on the command that ran, to rigc's line; `build` forwards it to its rig stage, issue #95). Each bone a constraint follows is declared to rigc as `invariants.detached` from every bone it drives, which rigc's gate rule `A25` checks |
-| `stops` | rig (handed to rig-c as `rig.json`'s `stops`, and moves slots, mesh weights and child bones on stopped links onto `<link>_d`); `propose --from-config` (`LINT stop on <chain> …`) | **authored**, optional (issues #404, #447): `[{chain, links?, against, at, inward, outward, lower?: {inward, outward}}]` — rig-c's leg stops (`RigStop`, rig-c 2.56.0, `rig-c/src/stop.ts`). `chain` is a chain `bones` declares (`CONFIG_NAME_RESOLVES`, `RIG_NAME_RESOLVES`); `links`, optional, is a non-empty list of links of that chain (`CONFIG_NAME_RESOLVES`, `CONFIG_FIELD_TYPE`), or absent for every link of `chain` in chain order; `against` is a bone `bones` declares, a chain link as `<chain><i>` (`CONFIG_NAME_RESOLVES`, `RIG_NAME_RESOLVES`); `at` is `[x, y]` in `against`'s local space, as rig-c's stop takes it (`CONFIG_FIELD_TYPE`): since each chain link (`leg_r0`, `leg_r1`) is turned to point along its segment (`+x` from origin to next link or tip, `+y` 90° counter-clockwise in Spine world), `at: [d, n]` sits `d` px from `against`'s origin toward its end and `n` px perpendicular to it; `inward`, `outward` and `lower.inward`, `lower.outward` are finite numbers (`CONFIG_FIELD_TYPE`). Every other stop rule — non-negative bounds, each stopped link written by a constraint, `against` not under the stopped chain, the aim not degenerate, `\|rest\| + outward <= 180°` (`RIG_STOP_BOUNDS`) — is rigc's to accept or refuse at the rig stage's gate, in rigc's words (`RIG_RIGC_GREEN`). **Rising-limb / prone geometry (issue #447):** rig-c's `expandStops` aims `<chain>_rest` from `links[0]`'s setup origin at `<chain>_touch` (`at` in `against`'s local frame) and clamps `<link>_d` inside `[rest − inward, rest + outward]`; Spine wraps rotation at `±180°`, so `\|rest\| + outward <= 180°` is required (`RIG_STOP_BOUNDS`). Whenever `<chain>_touch` lies **above** `links[0]`'s root in rig pixels (`ty < y0`, i.e. higher Spine `y` — e.g. stopping a hanging cloth chain against a rising shin `leg_<s1>` in a prone or kneeling pose where the knee sits below `links[0]` and the ankle above it, so positive `at[0]` walks upward along the shin past `links[0]`'s root), `rest` lands in the upper half-plane (`\|rest\| > 90°`) and `\|rest\| + outward` exceeds `180°`. Stop against the descending thigh (`leg_<s0>`), set `links` to start at a link whose root sits above `<chain>_touch`, or omit the stop when the rising shin sits outside the hanging chain's sweep; `propose --from-config` prints `LINT stop on <chain> …` with the exact coordinates and angles when `<chain>_touch` lies above `links[0]`'s root or `\|rest\| + outward > 180°`. For every stopped link `<link>`, the rig stage moves any slot on `<link>`, any mesh weight on `<link>`, and any bone whose parent is `<link>` (a branched cloth tree's branches hanging from `<trunk_last>`, before `--idle-keys ctl` adds `<bone>_ctl` and before `turn` adds `turn_<part>_<bone>`) onto `<link>_d`, the drawn link bone rig-c's `expandStops` creates at `<link>`'s setup frame to carry the clamped rotation. Absent, `rig.json` carries no `stops` and no byte of any output moves |
+| `stops` | rig (handed to rig-c as `rig.json`'s `stops`, and moves slots, mesh weights and child bones on stopped links onto `<link>_d`); `propose --from-config` (`LINT stop on <chain> …`) | **authored**, optional (issues #404, #447): `[{chain, links?, against, at, inward, outward, lower?: {inward, outward}}]` — rig-c's leg stops (`RigStop`, rig-c 2.56.0, `@rig-c/core/src/stop.ts`). `chain` is a chain `bones` declares (`CONFIG_NAME_RESOLVES`, `RIG_NAME_RESOLVES`); `links`, optional, is a non-empty list of links of that chain (`CONFIG_NAME_RESOLVES`, `CONFIG_FIELD_TYPE`), or absent for every link of `chain` in chain order; `against` is a bone `bones` declares, a chain link as `<chain><i>` (`CONFIG_NAME_RESOLVES`, `RIG_NAME_RESOLVES`); `at` is `[x, y]` in `against`'s local space, as rig-c's stop takes it (`CONFIG_FIELD_TYPE`): since each chain link (`leg_r0`, `leg_r1`) is turned to point along its segment (`+x` from origin to next link or tip, `+y` 90° counter-clockwise in Spine world), `at: [d, n]` sits `d` px from `against`'s origin toward its end and `n` px perpendicular to it; `inward`, `outward` and `lower.inward`, `lower.outward` are finite numbers (`CONFIG_FIELD_TYPE`). Every other stop rule — non-negative bounds, each stopped link written by a constraint, `against` not under the stopped chain, the aim not degenerate, `\|rest\| + outward <= 180°` (`RIG_STOP_BOUNDS`) — is rigc's to accept or refuse at the rig stage's gate, in rigc's words (`RIG_RIGC_GREEN`). **Rising-limb / prone geometry (issue #447):** rig-c's `expandStops` aims `<chain>_rest` from `links[0]`'s setup origin at `<chain>_touch` (`at` in `against`'s local frame) and clamps `<link>_d` inside `[rest − inward, rest + outward]`; Spine wraps rotation at `±180°`, so `\|rest\| + outward <= 180°` is required (`RIG_STOP_BOUNDS`). Whenever `<chain>_touch` lies **above** `links[0]`'s root in rig pixels (`ty < y0`, i.e. higher Spine `y` — e.g. stopping a hanging cloth chain against a rising shin `leg_<s1>` in a prone or kneeling pose where the knee sits below `links[0]` and the ankle above it, so positive `at[0]` walks upward along the shin past `links[0]`'s root), `rest` lands in the upper half-plane (`\|rest\| > 90°`) and `\|rest\| + outward` exceeds `180°`. Stop against the descending thigh (`leg_<s0>`), set `links` to start at a link whose root sits above `<chain>_touch`, or omit the stop when the rising shin sits outside the hanging chain's sweep; `propose --from-config` prints `LINT stop on <chain> …` with the exact coordinates and angles when `<chain>_touch` lies above `links[0]`'s root or `\|rest\| + outward > 180°`. For every stopped link `<link>`, the rig stage moves any slot on `<link>`, any mesh weight on `<link>`, and any bone whose parent is `<link>` (a branched cloth tree's branches hanging from `<trunk_last>`, before `--idle-keys ctl` adds `<bone>_ctl` and before `turn` adds `turn_<part>_<bone>`) onto `<link>_d`, the drawn link bone rig-c's `expandStops` creates at `<link>`'s setup frame to carry the clamped rotation. Absent, `rig.json` carries no `stops` and no byte of any output moves |
 | `turn` | rig (adds the turn control or 2.5D head-turn producer) | **proposed** only with `propose --full`/`--head` (issue #251), then corrected, or **authored** for 2.5D depth-sampled head turns (issue #763): `{pivot?, depths?, deform?, band?, radius?, surface?: {radius?}, head?: {pivot?, radius?}, roles?, counter?, grid?, unitDepths?, body?}`. When `roles` is declared (`{<part>: "surface" \| "unit" \| "rear"}`, issue #763; `CONFIG_TURN_ROLE_UNKNOWN`, `CONFIG_TURN_SURFACE_REQUIRED`, `RIG_TURN_SURFACE_MESH_BINDINGS`, `CONFIG_TURN_UNIT_MESH_BONES`), the rig stage runs the 2.5D depth-sampled head-turn producer: it edge-extends each turn-bound part's depth sheet across its transparent border and semi-transparent fringe from the nearest fully opaque (`alpha === 255`) texel before `PAD = 4` clamping (`padTurnDepthSheet`, `DEPTH_SILHOUETTE_SIZE_MISMATCH`), keeps authored `"surface"` meshes and their skinning (#795), sampling each vertex at its weighted setup position on its own extended sheet and emitting one inverse-setup-bone offset per influence (`D = -(pivot + z - zRef) * sin(angle)`, on x for yaw and y for pitch, with no narrowing or 2D spin); shared frames moved by another turn role are refused (`RIG_TURN_SURFACE_MESH_BINDINGS`), as are alternate drawings without their own depth sampling frame (`RIG_TURN_SURFACE_MESH_ATTACHMENT`). It promotes `"surface"` regions to `generator: {kind: "grid", cols, rows, depth}` (`grid`: `[cols, rows]` or `{<part>: [cols, rows]}`, default `[13, 16]`, bounded at `<= 2,400` triangles per slot and `<= 4,000` total, `RIG_TURN_GRID_BUDGET`, `RIG_TURN_SURFACE_DEPTH_REQUIRED`, `RIG_TURN_SHARED_DEPTH_SCALE`), emits `faceshift` and `rear_shift` under `head` (`CONFIG_TURN_HEAD_BONE`, `RIG_TURN_HEAD_BONE`), `<part>_surface` and `<part>_unit` under `faceshift`, and `yaw_dial` and `pitch_dial` under `root` (`CONFIG_TURN_BONE_FREE`, `RIG_TURN_NAME_FREE`), re-parents `"unit"` region bones and `"rear"` bones and mesh weights to `faceshift` and `rear_shift` (while `"unit"` mesh parts receive their own `<part>_unit` carrier under `faceshift`, rebind direct `"head"` weights to `<part>_unit`, reparent bound chain roots to `<part>_unit` while keeping chain skinning weights intact, and key `<part>_unit` in `turn_units`, #790), samples each `"unit"` bone's depth from the `"surface"` depth sheet at its rest position (or reads `unitDepths.<part>`, `RIG_TURN_UNIT_DEPTH_REQUIRED`), enforces ear occlusion (`ear_r`/`ear_l` drawn before the `face` surface in `assemble.plan`, `CONFIG_TURN_EAR_DRAW_ORDER`, and behind the cheek surface, `RIG_TURN_EAR_DEPTH_BEHIND_CHEEK`), and writes `turn` and `tilt` `derive` tracks (`pivot` default `55` rig px, `counter` default `0.1` in `[0, 1]`, `CONFIG_TURN_COUNTER_RANGE`). `depths` holds, per part, the See-through layer's `depth_median` the part came from (larger = further back), read from the run the part was assembled from; a `painting:` patch has none and is not carried. A rider (issue #271) — a part from an `eyewhite`, `irides`, `eyelash`, `eyebrow`, `nose` or `mouth` layer — is drafted at the `face` part's depth, 0.001 nearer when parts.json draws it after the face and 0.001 further when before: See-through makes no depth of its own for the eye group (it cuts them from one depth map of the combined eyes) and clamps nose and mouth to the face's median − 0.001, and the two runs' own medians for these layers disagreed by up to 0.47 and swapped their order against the face. Every other layer — ears, headwear and earwear included — keeps its own median, unless it rides another part's bone. With no `face` part, or more than one, the riders keep their own and a note says so. A rider by bone (issue #535) — a part every *ownable* bone of which (a chain link, or a bone no other bone hangs from; `head`, `chest` and any bone with a child are shared and never count on their own) is *hosted* by another carried part, the host of a bone being the carried part that binds it (its region's bone; a mesh's `segments`, `contour` and `auto` regions' bones) with the most `opaque_px`, the earlier in parts.json on a tie, and which hosts no bone itself — is drafted at its host's depth, 0.001 nearer when drawn after the host and 0.001 further when before, and a note names the host, the bones and its own median: a pin, clip or ornament on the back hair's links travels with the back hair, not with its own layer's depth. `propose` reads the proposal's own `bones`, `meshes` and `regions`; the face riders are read by their tag first and never by their bones. A part bound to two hosts' bones rides neither and a note says so. In the rig stage, an authored depth on a rider by bone whose fraction differs from its host's by more than 0.1 of the dial (`TURN_RIDER_APART`, a share of `pivot − nearest`) is refused (`CONFIG_TURN_RIDER_DEPTH`); the host is read off `parts.json`'s `opaque_px`, so the config loader cannot see it. One note lists each part's depth and where it came from; a carrier the other run places more than 10 % of `pivot − nearest` away gets a note naming both values and the run read — the two runs are not reconciled. `pivot` is the depth that stays put; `propose` drafts the mean of the parts' depths weighted by `opaque_px`, the one depth at which the painted pixels' centroid does not slide under the dial. The rig stage adds a bone `turn` under `root` at its origin that nothing keys — its local x is the dial, in rig px — and carries each part by `(pivot − depth) / (pivot − nearest depth)` of it: the nearest part all of it, a part behind the pivot the other way, a part at the pivot not at all. Each part rides leaf twins (`turn_<part>_<bone>`, an identity child of every bone its slot and weights bind) moved by one `transform` constraint (`turn_<part>`, after the config's own); the idle's keys, the `<bone>_ctl` controls and a physics constraint stay on the bones, and the dial moves none of them. Optional `deform` (`Partial<FaceDeformFractions>`, issue #436) overrides the Set B ×2.5 face surface deformation table (`FACE_DEFORM_FRACTIONS`, checked against `FACE_DEFORM_RANGES` by `CONFIG_TURN_DEFORM_RANGE`); when `applyFaceSurfaceDeform` runs on a rig whose `motion` carries `tilt` or `turn` slider `derive` keys, it requires `config.turn` (`CONFIG_TURN_REQUIRED`, issue #478; `propose --full`/`--head` drafts it), promotes `face` on `head` (or `turn_face_head` when `turn` is declared) to the uneven 5×5 grid mesh, keys `face`, `hair_front` and `hair_back` deform timelines and ear/topknot tracks from `evalPitchFaceSurface` and `evalYawFaceSurface`, and samples the same deform field across each `features` member's rest span (`featRx = (24 / 106) · W`, `featRy = (12 / 128) · H`) with its depth fraction `z / zRef` as the field's angle input and chord foreshortening (`scalex` narrowing on the leading side and widening on the trailing side, `scaley` on pitch) so every feature's bounding box stays inside the deformed face plate across the rated band (issue #468). On yaw (`issue #479`), `evalYawFaceSurface` evaluates a **cylinder projection** (`cylinderYawDx`: `Δx(x, θ, R) = R · (sin(clamp(arcsin(clamp(x / R, −1, 1)) − θ, −π/2, π/2)) − clamp(x / R, −1, 1))`) of radius `R` (`turnSurfaceRadius`: `turn.surface.radius ?? turn.radius ?? turn.head.radius`, positive rig px checked by `CONFIG_FIELD_TYPE`, defaulting to half the face plate's opaque width `W / 2`) tapered by a cubic Hermite outline weight (`wOutline = 1` for `\|ux\| <= 0.7`, reaching `0` at `\|ux\| = 1.0`) so features slide across a fixed outline (`iris` shift within `±2%` of `cylinderYawDx`), the trailing cheek strip widens (`>= 1.54×` at `±15°`), and the leading jaw edge holds fixed (`0 px` shift) unless explicit horizontal `turn.deform` overrides (`turn_mid_x`, `turn_lead_compress_x`, `turn_trail_shift_x`) request the flat yaw table. On yaw (`issue #478`), `applyFaceSurfaceDeform` also derives a **head-only pivot** (`headTurnPivot`: `turn.head.pivot` when authored, otherwise the `opaque_px`-weighted mean of `depths[part]` across the head parts `DEFAULT_HEAD_TURN_PARTS` — `face`, `hair_front`, `hair_back`, `ear_r`, `ear_l`, `hairpin` — from `parts.json`, falling back to `turn.pivot`) so a forward torso or arm in `turn.depths` does not pull the head's rotation axis in front of `face`: `hair_back` (`depth_median > headPivot`, negative `headTurnFraction`) and `hairpin` behind `headPivot` translate opposite to the face's turn (`dx = s · turn_face_center_x · W · (headPivot − depth) / (headPivot − nearestHeadDepth)`), emerging on the trailing side to compensate for the leading-cheek foreshortening and keeping the combined head silhouette width near-constant across `±15°` without any same-sign `turn_hair_back_cheek_x` term. Optional `band` (`number` or `{yaw?, pitch?}`, positive degrees, issue #472) declares the rig's rated face turn band (default `FACE_RATED_BAND`: `yaw <= 15°`, `pitch <= 12°`); declaring a `turn.band` or a `motion.animations_from` `turn`/`tilt` `derive.degrees` above `±15°` yaw or `±12°` pitch without an `assemble.alternates` entry that replaces `face` is refused (`CONFIG_FACE_BAND_EXCEEDED`), and on a single-plate rig `applyFaceSurfaceDeform` adds self-targeting transform constraints `yaw_clamp` (`[-15, 15]`) and `pitch_clamp` (`[-12, 12]`) ahead of the slider constraints so driving `yaw` or `pitch` beyond the rated band clamps at the boundary. At rest: with `turn` declared, no pixel differs by more than 1 level at dial 0 (not byte-identical; the cause is float noise in the identity child bones, and the constraints add nothing); without `turn`, byte-identical. Neither `pivot` nor `depths` has a default (`CONFIG_FIELD_PRESENT`); `pivot` and `head.pivot` must lie behind the nearest part (`CONFIG_TURN_PIVOT_BEHIND_NEAREST`). Absent, no control is added and no byte of any output moves |
 | `scene` | assemble (the recomposite, its holes and the figure's mask); check, through `parts.json`'s `scene` block (`RECOMPOSITE_HOLES`, the seam) | **authored**, optional; `propose` writes none (issue #242). `{}` declares the painting a scene: the figure and its surroundings in one image, See-through's full run holding only the figure. With it, `assemble` reads the recomposite figures, the hole list and the `uncovered:` lines inside the figure — the rig pixels where any full-run layer's alpha is above 8 (`OPAQUE_ALPHA_ABOVE`, the cut every layer's painted pixels are read by) — each line starting `inside the figure (config.scene: …, <n> of <m> rig px)`; writes that figure as `figure_rig.png` (white on black) beside the recomposite, and a `scene` block in `parts.json`; flags error pixels on the error map inside it only (outside, the painting grey); and `check` leaves out of the seam every frame pixel whose composite sample reaches the painting's outermost row or column, saying how many (`seam_border` in `check.json`, and on the seam line). It takes no field: the figure and its threshold are derived. A key in it other than a record or an annotation is `CONFIG_KEY_KNOWN`. Absent, no byte of any output moves |
 | `cloth` | `propose --cloth` only; no other stage reads it, so it moves no byte of any build | **authored**, optional (issue #364): one recipe per tag, `{"bottomwear": {…}, "back hair": {…}, "front hair": {…}}`, each `{chains, links, wind, gravity, split?, length_ratio?, strength?, damping?, alternate_damping?, translate?, swing?, part?, influence?}`. `influence` (issue #518) — `{across, max, shape, radius?}`: the parts this recipe meshes are drafted in the influence mode (`meshes.<part>.influence` above) at their lattice's cell, with `across`, `max` and `shape` as declared (each required — the reading behind the radius did not vary them) and `radius` as declared or, absent, drafted as the farthest vertex's distance plus 3 cells (the `influence.radius` row); without it the parts keep their lattice. `chains` — trees across the piece (for `back hair`, per side of the eye axis), a whole number, 1 or more; `links` — links from root to tip on every path, 1 or more; `split` — `{at, into}`: the first `at` links are the trunk, which forks into `into` (2 or more) branches; `at` below `links` (`CONFIG_CLOTH_SPLIT_BEFORE_TIP`); `length_ratio` — a path's last link over its first, above 0, default 0.5; `strength` — `{trunk, branch, edge}`, each above 0 and below the spring's stability bound (`CONFIG_CLOTH_SPRING_STABLE`), default 100 / 100 / 50; `damping` — in [0, 1], absent: rig-c's default; `alternate_damping` — the odd trees' damping, in [0, 1], beside `damping` and different from it (`CONFIG_CLOTH_ALTERNATE_DIFFERS`); `wind`, `gravity` — `[root, tip]`, each 0 or more, tip at or above root (`CONFIG_CLOTH_RESPONSE_GROWS_TO_TIP`); `translate` — the x and y mix of a dangling end's flutter, above 0 and at most 1; `swing` — `bottomwear` only, `{scales}`, one positive scale per tree (`CONFIG_CLOTH_SWING_SCALE_PER_TREE`); `part` — `bottomwear` only (`CONFIG_CLOTH_PART_ON_BOTTOMWEAR`), a non-empty part or cut-piece name: the `topwear` part that holds a skirt See-through returned inside it (a dress), or its skirt piece cut by `assemble.cuts`, which takes the skirt's trees (issue #402, *A skirt inside topwear* below; the part is checked by `propose`, `PROPOSE_CLOTH_PART`). The two defaults are the recipe's own, measured on its synthetic fixture (the recipe below). The recipe below says what each field drafts. The config written: `propose --cloth <config.json> --write-config <out.json>` (issue #537) writes this config's own text back with the sections the recipe drafts spliced in — `meshes.<part>` and `regions.<part>`, and `bones`, `constraints` and `motion.tracks` entry by entry by name (issue #552) — and every other byte as read; `--from <previous config>` (issue #571) takes an entry equal to the previous recipe's draft as the recipe's (*The config written*, under the recipe below) |
@@ -1559,7 +1559,7 @@ unreduced source on the rig's idle and passes the author's bounds (step 4). The
    read, rather than by rig-c's admission after the call. The row's `source.contour` says so
    (`fitConnectivity: 8`); the contour mode keeps its 4-connected reading and writes no such key. Its weights are the contour mode's — segments and region falloff — under the author's
    `influences`, with no 0.03 floor unless the author writes one.
-2. **The call** — rig-c's `reduceMesh` (`rig-c/mesh`, 2.28.x) refines inside the declared
+2. **The call** — rig-c's `reduceMesh` (`@rig-c/core/mesh`, 2.28.x) refines inside the declared
    regions, then removes vertices while every declared bound still holds. Every number it is
    handed is one of the fields below; `preset` is null (no preset exists yet: a preset will be a
    named, versioned set of these numbers, expanded into the report), and no deform key or linked
@@ -1574,7 +1574,7 @@ unreduced source on the rig's idle and passes the author's bounds (step 4). The
    swapped for the unreduced source — its UVs, triangles and hull as `reduceMesh` was handed them,
    its own weights bound the same way (the **reference**, `build --profile rig-play` without
    `--pack`: the same gate over the compile, and nothing reads a reference's pages). rig-c's
-   `compareMeshesInMotion` (`rig-c/meshcompare`) poses both model documents on the idle
+   `compareMeshesInMotion` (`@rig-c/core/meshcompare`) poses both model documents on the idle
    exactly as `check` renders it — `idle` at 12 fps over its duration, physics reset at 0 and
    stepped by 1/12 s, no warm-up — at the render's frames (`grid`, i/12 s) and a frame interval's 0.381966 past each (`irr`, frames the render never
    draws), and measures how far the reduced mesh carries each art pixel from where the source
@@ -4157,7 +4157,7 @@ says why each requirement exists and what breaks without it.
 | <a id="RIG_EXPLICIT_ALTERNATE"></a>`RIG_EXPLICIT_ALTERNATE` | an alternate set replaces a part bound to one accepted explicit payload | use a generated mesh for alternate artwork; no alternate is inferred from a base payload |
 | <a id="RIG_INFLUENCE_REACH"></a>`RIG_INFLUENCE_REACH` | an influence mesh's `radius` is at or under the distance from its farthest lattice vertex to that vertex's nearest link (issue #378): a link pulls only when it is nearer than `radius`, so that vertex would be pulled by none. The vertex, where it is and the distance are named | a `radius` above the distance named, or a segment nearer that part of the art |
 | <a id="RIG_INFLUENCE_LATTICE"></a>`RIG_INFLUENCE_LATTICE` | rig-c's segments lattice refused the part at the declared `cell` (no pixel of the part holds art, or the cell is not a whole number of at least 1); rig-c's message is quoted | a part with art, or a whole `cell` of at least 1 |
-| <a id="RIG_RIGC_GREEN"></a>`RIG_RIGC_GREEN` | rig-c refused the rig; its own FAIL or compile-error line is quoted, and nothing was written. A `constraints` field rigc does not read, or a value it refuses, is this line in rigc's words (`constraint "aim" (ik) has a key this compiler does not read: "mixx" (did you mean "mix"?)`), as is `A25_DETACHED_BONE_PARENTAGE` on a declared scene target. So is an ik whose `bones` are more than two, or two of which the second is not the first's child: from rig-c 2.15.0 its rig-spec parser refuses both by name (`ik constraint "reach" names 3 bones …`, `ik constraint "reach": "hem1" is not a child of "body" ("hem0" stands between) …`; firejune/rigc#1205), and this package no longer refuses them itself (issue #103; it did from #92 while rigc's gate passed them). Under `--idle-keys ctl` a two-bone ik over a chain link and its child link is that second refusal too, because the child's `<link>_ctl` stands between them; rigc's remedy names the control, which a config cannot, so when rigc's line says that control alone stands between, the rig stage adds a sentence naming `--idle-keys direct` on the command that ran | the field rigc's line names; for the split pair, `rig --idle-keys direct` or `build --idle-keys direct`, as the line says, which keys the link in place — rig-c's own AUTHORING §5 maps each of its assertions (`node_modules/rig-c/docs/AUTHORING.md`) |
+| <a id="RIG_RIGC_GREEN"></a>`RIG_RIGC_GREEN` | rig-c refused the rig; its own FAIL or compile-error line is quoted, and nothing was written. A `constraints` field rigc does not read, or a value it refuses, is this line in rigc's words (`constraint "aim" (ik) has a key this compiler does not read: "mixx" (did you mean "mix"?)`), as is `A25_DETACHED_BONE_PARENTAGE` on a declared scene target. So is an ik whose `bones` are more than two, or two of which the second is not the first's child: from rig-c 2.15.0 its rig-spec parser refuses both by name (`ik constraint "reach" names 3 bones …`, `ik constraint "reach": "hem1" is not a child of "body" ("hem0" stands between) …`; firejune/rigc#1205), and this package no longer refuses them itself (issue #103; it did from #92 while rigc's gate passed them). Under `--idle-keys ctl` a two-bone ik over a chain link and its child link is that second refusal too, because the child's `<link>_ctl` stands between them; rigc's remedy names the control, which a config cannot, so when rigc's line says that control alone stands between, the rig stage adds a sentence naming `--idle-keys direct` on the command that ran | the field rigc's line names; for the split pair, `rig --idle-keys direct` or `build --idle-keys direct`, as the line says, which keys the link in place — rig-c's own AUTHORING §5 maps each of its assertions (`node_modules/@rig-c/core/docs/AUTHORING.md`) |
 
 ### mesh-draft
 
@@ -4428,7 +4428,7 @@ documents do not ship). Each is an input this package built; none is an author's
 | <a id="REQUIREMENTS_MAY_FOLD"></a>`REQUIREMENTS_MAY_FOLD` | a `may_fold` entry names a slot with no mesh attachment — a region is one quad and cannot fold (issue #320). Refused before anything is built. Before issue #333 an entry naming the idle was refused here too; the bar reads the idle now, and `idle` is an animation name like any other | a mesh slot |
 | <a id="REQUIREMENTS_NOT_PLANTED"></a>`REQUIREMENTS_NOT_PLANTED` | a `not_planted` name is a part `check` does not read as a planted foot — it does not come from a See-through `footwear` layer — or there is no `parts.json` to choose the feet by (issue #231). Refused before anything is built | a `footwear` part's name |
 | <a id="REQUIREMENTS_TIP_EXCEPTION"></a>`REQUIREMENTS_TIP_EXCEPTION` | a `not_swinging`, `rises` or `rests` name is a part `TIP_OVER_ROOT` does not read — not from a See-through `handwear` or `bottomwear` layer — or there is no `parts.json` (refused before anything is built); or a `rises` part is not carried by a chain that rises: the chain's **last link**, at the setup pose, runs other than up — from its origin along its `length` (the extent the rig stage turns a link to), or, a last link with no length, from the link before's origin to its own — the detail giving the link read and the direction measured (refused after the idle is rendered, before `check.json` is written) (issues #231, #322; until #322 it read the chain's first link's origin to its last's, which refused a folded arm — a link that hangs, then a forearm raised) | a swinging part's name; for `rises`, a part whose chain does rise |
-| <a id="CHECK_ENVIRONMENT"></a>`CHECK_ENVIRONMENT` | `check --environment` (or `build --environment`, forwarded): the schedule is refused, the detail rigc's own sentence verbatim. Read once by rig-c's reader (`readEnvironmentSchedule`, `rig-c/src/environment.ts`) before anything is built — nothing at the path, a file that is not JSON or not an object, a `spec` other than `rigc-environment/1`, a key besides `spec`, `steps` or a step's `t`, `wind`, `gravity`, no step, a `t` not finite, below 0 or not after the step before, a `wind` or `gravity` not a pair of finite numbers (JSON's `1e999` reads as `Infinity` and is refused), a step stating neither — and `--out` is not written (`build` refuses under `[assemble]`, before it assembles). After the build, what `rigc render --environment` refuses of a well-formed schedule on this rig, quoted from its `--environment <path>:` line: no physics constraint, a half no constraint answers, two steps on one frame at 12 fps, a step after the last frame of the animation rendered. Also refused before anything is built: a `motion.json` with no animation, where no render `check` makes could pose the schedule | the schedule — rigc's sentence names the entry, the field, the value found and the value required; for a rig with no physics constraint, drop the flag: no world moves it |
+| <a id="CHECK_ENVIRONMENT"></a>`CHECK_ENVIRONMENT` | `check --environment` (or `build --environment`, forwarded): the schedule is refused, the detail rigc's own sentence verbatim. Read once by rig-c's reader (`readEnvironmentSchedule`, `@rig-c/core/src/environment.ts`) before anything is built — nothing at the path, a file that is not JSON or not an object, a `spec` other than `rigc-environment/1`, a key besides `spec`, `steps` or a step's `t`, `wind`, `gravity`, no step, a `t` not finite, below 0 or not after the step before, a `wind` or `gravity` not a pair of finite numbers (JSON's `1e999` reads as `Infinity` and is refused), a step stating neither — and `--out` is not written (`build` refuses under `[assemble]`, before it assembles). After the build, what `rigc render --environment` refuses of a well-formed schedule on this rig, quoted from its `--environment <path>:` line: no physics constraint, a half no constraint answers, two steps on one frame at 12 fps, a step after the last frame of the animation rendered. Also refused before anything is built: a `motion.json` with no animation, where no render `check` makes could pose the schedule | the schedule — rigc's sentence names the entry, the field, the value found and the value required; for a rig with no physics constraint, drop the flag: no world moves it |
 | <a id="CHECK_WIND_BAND"></a>`CHECK_WIND_BAND` | `check --wind-band` (or `build --wind-band`, forwarded, issue #590): the sweep file is refused before anything is built, or cannot be measured against the rig. Refused before the build (`build` refuses under `[assemble]` before it assembles, and `--out` is not written): nothing at the path, a file that is not a JSON object, an unknown key (besides `note`, `*_note` and `x-…`), a missing or malformed field (`spec` must be `"rig-parts-wind-band/1"`; `min`, `max`, `step` finite numbers with `min < max`, `step > 0`, and `(max - min) / step` within `1e-6` of an integer at most `64`; `fps` a positive integer; `max_gap` and `max_ghost` non-negative integers; `pairs` a non-empty array of unique `"<a>:<b>"` strings with `a !== b`). Refused against the rig before `rigc build`: a slot in `pairs` not in `rig.json`'s `slots`, `motion.json` with no animation, a rig with no physics constraint, or a rig where no physics constraint has a non-zero `wind`. Refused after the first sweep render (before `check.json` is written, with `--out` cleaned): a pair in `pairs` whose drawings share no overlap band at the setup pose (`status: "skip"` or `banded === 0` in `seam.json`) | the `--wind-band` file or the rig — every field in `"rig-parts-wind-band/1"` is required (nothing falls back to `SEAM_OVER_MOTION`), each `"<a>:<b>"` pair must name two distinct slots whose art overlaps at rest, and the rig must declare at least one physics constraint that answers `wind` |
 | <a id="REQUIREMENTS_SEAM"></a>`REQUIREMENTS_SEAM` | a `seam` cannot be read against the rig: there is no `parts.json` (a merged rig, §7 *Measuring a rig rig-parts did not assemble*), or the two parts' art does not meet at the setup pose (no 4-adjacent pair). Refused before anything is built | two parts whose art touches, on a rig with its `parts.json` |
 
@@ -4479,7 +4479,7 @@ Absent declaration retains existing output bytes except optional new evidence on
 
 **Body-root seam identity** (issue #686). A limb must have exactly one segment0 part. Its declared bone must have one named immediate parent; the root slot must bind that bone (or its declared turn child). Non-limb parts with `topwear` or `bottomwear` source provenance, a slot on that parent (directly or through its verified generated turn child) and a named default-skin drawing are candidates. The body-side child must match `applyTurn`'s exact generated name, unique identity bone and parent, control and per-part transform binding; a similarly named bone alone is not proof (issue #708). The original carrier and pair slot names do not change under turn; stock setup pose `render --seam` selects all matching drawings with `banded > 0` (its existing alpha-overlap band, without dilation), so one selects one pair and two select both pairs. When eligible candidates all return valid setup banded 0, that limb has no selected root pair: `unmeasuredRoots` retains its limb, bone, parent, segment0 part, candidates and named reason, reported as SKIP, not measured PASS. Part spelling, nearest geometry and shared mesh influences select nothing. On `wind` the pairs are `topwear|upperarm_r`, `topwear|upperarm_l`, `bottomwear|thigh_r` and `bottomwear|thigh_l`; “trunk” is not a part name. Existing pairs keep their order; a reversed explicit declaration deduplicates with the root pair and retains both declarations. An ambiguous/missing named binding, no eligible candidate, or unreadable/undrawn setup data is `CHECK_MOTION_SEAM_ROOT`, naming the part and candidates. Valid zero-band metadata is carried separately as optional `roots.unmeasured`, never as a fabricated measured pair. The all-zero root block remains present and its bar is skipped; measured FAIL takes precedence over SKIP, while measured PASS plus any unmeasured root stays SKIP. No body provenance leaves legacy pair selection unchanged and supplies no body-root coverage.
 
-Renderer metadata and exact raster reads use the promised `rig-c/render-shared` entry (rig-c >=2.69.0 <3.0.0). It registers no Spine runtime; where that runtime resolves from rig-c's own package root, the existing `rig-c/render` entry registers the official Spine side explicitly. An install without Spine keeps rig-c's own candidate chooser and gate; candidate or loader failures never select a guessed fallback.
+Renderer metadata and exact raster reads use the promised `@rig-c/core/render-shared` entry (rig-c >=2.69.0 <3.0.0). It registers no Spine runtime; where that runtime resolves from rig-c's own package root, the existing `@rig-c/core/render` entry registers the official Spine side explicitly. An install without Spine keeps rig-c's own candidate chooser and gate; candidate or loader failures never select a guessed fallback.
 
 The body-root bar counts stock partitions `gapOpen` plus `ghostA` or `ghostB` owned by the pair's UNDER-owned drawing in resolved draw order on each active frame, comparing their summed cells against the unchanged strict floor `px > round(max(box width, box height) / cell)` on the original raw kind boxes (their union when both kinds contribute), never the narrowed partition boxes; `gapCovered` and OVER-owned ghost cells do not count (issue #711). The metric mode is `gap-open+under-ghost`; rows retain the exact partition counts, UNDER owner and counted total in `cells`, including excluded and under-floor readings. Missing partitions, inconsistent sums or unavailable ownership are named `FRAMES_SIDECAR` refusals, never inferred zero. An active rendered environment fails `CHECK_SEAM_OVER_MOTION` above that floor, setting overall PASS false and exits 1. Existing internal-joint and explicit-only pairs remain warnings: their PASS, exit status and bar count are unchanged; reference worlds remain informational. The root bar is counted once, and absence is not a zero or a PASS. No whole-box alpha exemption or consumer compositor is used. This gate samples the supplied animations at 12 fps, not another motion or player scene.
 

package/docs/MIGRATION.md

@@ -52,6 +52,15 @@ The upstream package was renamed on npm at 2.20.4 with the same `exports` map
 installed the former upstream name beside this package installs nothing more:
 `rig-c` comes as a dependency. No Spine runtime is a dependency, as in 0.16.0.
 
+### Scoped core dependency
+
+The current dependency is `@rig-c/core` at `^2.72.0`, replacing the literal
+`rig-c` dependency described for earlier versions above. The alias remains
+published. Imports retain their subpaths: `rig-c/mesh` becomes
+`@rig-c/core/mesh`, and `rig-c/core` becomes `@rig-c/core/core`. The command
+remains `rigc`. Installing the canonical core beside this package no longer
+adds the legacy package as a second compiler and command owner.
+
 ### The config
 
 **A config that built on 0.16.0 loads unchanged.** The loader's only change between

package/docs/STABILITY.md

@@ -241,7 +241,7 @@ keeps complete canonical raw pair data (boxes/cut metadata included), omitting
 `picture` unless its image exists. Semantic signatures preserve original source
 attachment UVs/topology/weights, own image content and world vertices/colour,
 not atlas pages/UVs or global piece ordinals. Unknown/no-art support stays conservative.
-Renderer metadata and exact raster reads use the promised `rig-c/render-shared` entry (rig-c >=2.69.0 <3.0.0). It registers no Spine runtime; where that runtime resolves from rig-c's own package root, the existing `rig-c/render` entry registers the official Spine side explicitly. An install without Spine keeps rig-c's own candidate chooser and gate; candidate or loader failures never select a guessed fallback.
+Renderer metadata and exact raster reads use the promised `@rig-c/core/render-shared` entry (rig-c >=2.69.0 <3.0.0). It registers no Spine runtime; where that runtime resolves from rig-c's own package root, the existing `@rig-c/core/render` entry registers the official Spine side explicitly. An install without Spine keeps rig-c's own candidate chooser and gate; candidate or loader failures never select a guessed fallback.
 
 An unavailable, nonfinite, unrepresentable or oversized union, or nonempty official pinned.outside, refuses `CHECK_SEAM_DOMAIN`. Geometry margins outside the authored canvas are included in U, not treated as opaque-clip evidence. State-by-state geometry reads retain bounds/identities rather than all decoded pages or poses. `--keep-stills` keeps
 canonical frames in `setup_still/` and fitted diagnostics in `setup_still_auto/`.
@@ -300,20 +300,20 @@ in the package.
 
 ## rig-c
 
-`dependencies` takes `rig-c` `^2.72.0`: 2.72.0 or any later 2.x. Bun 1.4 or later
+`dependencies` takes `@rig-c/core` `^2.72.0`: 2.72.0 or any later 2.x. Bun 1.4 or later
 is the declared floor (`engines.bun` `>=1.4.0`; older 1.4 releases are not tested in
 CI, which runs `latest`, and compatibility with an older 1.4 release is handled when
 reported as an issue). What this package relies on in rig-c, every import
 read off `src/` and `cli.ts`:
 
-- the named entries `rig-c/mesh` (the outline functions, `measureAuthoredMeshFit`,
+- the named entries `@rig-c/core/mesh` (the outline functions, `measureAuthoredMeshFit`,
   `reduceMesh`, `skinningEnvelopeBone`, `writeMeshQualityReport` and their types)
-  and `rig-c/meshcompare` (`compareMeshesInMotion`);
-- the deep paths its `exports` map carries: `rig-c/src/rig.ts` (`parseRigSpec`,
-  `RIG_SPEC_VERSION`, the constraint keys), `rig-c/src/errors.ts`,
-  `rig-c/src/png.ts`, `rig-c/src/transform.ts` (the y flip, through
-  `src/coords.ts` only), `rig-c/tools/plate.ts` (the PNG codec) and
-  `rig-c/tools/font5x7.ts`;
+  and `@rig-c/core/meshcompare` (`compareMeshesInMotion`);
+- the deep paths its `exports` map carries: `@rig-c/core/src/rig.ts` (`parseRigSpec`,
+  `RIG_SPEC_VERSION`, the constraint keys), `@rig-c/core/src/errors.ts`,
+  `@rig-c/core/src/png.ts`, `@rig-c/core/src/transform.ts` (the y flip, through
+  `src/coords.ts` only), `@rig-c/core/tools/plate.ts` (the PNG codec) and
+  `@rig-c/core/tools/font5x7.ts`;
 - the `rigc` command: `build` and `render`, and `--version`, whose `entry:` line
   says which validator gated a build (`check.json`'s `rigc_entry`).
 

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "rig-parts",
-  "version": "1.74.0",
+  "version": "1.74.1",
   "description": "AI-authored 2D character parts from one anime painting and its See-through layer decomposition: measured parts, weighted-mesh rig specs, verified through rig-c before anything is written. A CLI for agents that cannot see the image.",
   "type": "module",
   "bin": {
@@ -64,7 +64,7 @@
   },
   "dependencies": {
     "ag-psd": "^31.0.2",
-    "rig-c": "^2.72.0"
+    "@rig-c/core": "^2.72.0"
   },
   "devDependencies": {
     "@esotericsoftware/spine-core": "4.3.13",

package/skills/rig-parts/SKILL.md

@@ -218,4 +218,4 @@ leaves to you:
 
 A `RIG_RIGC_GREEN` or `CHECK_RIGC_GREEN`
 line quotes rig-c's own assertion; rig-c's guide for those is
-`node_modules/rig-c/docs/AUTHORING.md`, and its `rigc` skill covers the compiler.
+`node_modules/@rig-c/core/docs/AUTHORING.md`, and its `rigc` skill covers the compiler.

package/src/apng.ts

@@ -34,7 +34,7 @@
  * bitstream encoder, and none ships here.
  */
 import { deflateSync } from 'node:zlib';
-import { PNG_SIGNATURE, pngChunk } from 'rig-c/tools/plate.ts';
+import { PNG_SIGNATURE, pngChunk } from '@rig-c/core/tools/plate.ts';
 import { histogram, mapToPalette, medianCut, type PaletteError, paletteError, type Rgba } from './palette.ts';
 import type { Raster } from './raster/types.ts';
 

package/src/autoamplitude.ts

@@ -68,7 +68,7 @@
  *
  * Pure: no clock, no randomness, nothing read or written.
  */
-import type { MeshReductionInput, MotionAmplitude, TrackAmplitude } from 'rig-c/mesh';
+import type { MeshReductionInput, MotionAmplitude, TrackAmplitude } from '@rig-c/core/mesh';
 import type { MotionKey, MotionSpec } from './motion.ts';
 
 /**

package/src/autoenvelope.ts

@@ -82,7 +82,7 @@
  *
  * Pure: no clock, no randomness, nothing read or written.
  */
-import { type BoneMotionRange, type EnvelopeBoneRanges, MeshReductionError, type MeshQualityReport, type MeshReductionInput, type SkinningEnvelope, type SkinningEnvelopeBone, skinningEnvelopeBone } from 'rig-c/mesh';
+import { type BoneMotionRange, type EnvelopeBoneRanges, MeshReductionError, type MeshQualityReport, type MeshReductionInput, type SkinningEnvelope, type SkinningEnvelopeBone, skinningEnvelopeBone } from '@rig-c/core/mesh';
 import type { ConfigConstraint } from './config.ts';
 import type { MotionKey, MotionSpec } from './motion.ts';
 import { edgeLength } from './length.ts';

package/src/automesh.ts

@@ -18,7 +18,7 @@
  *    author's `influences` — no 0.03 floor unless the author wrote it (P19) —
  *    unrounded, so a vertex that survives can be compared bit for bit.
  * 2. **The call** ({@link autoReductionInput}) — rig-c's `reduceMesh`
- *    (`rig-c/mesh`, 2.28.x), refinement inside the declared regions then
+ *    (`@rig-c/core/mesh`, 2.28.x), refinement inside the declared regions then
  *    reduction, every input from the config or from the source, as the
  *    contract types it (docs/MESH_REDUCTION.md §1): `art` the padded image's
  *    alpha at threshold 1 in the part-local frame with `pageScale` 1 (the
@@ -82,7 +82,7 @@ import {
   type SourceMesh,
   type Termination,
   writeMeshQualityReport,
-} from 'rig-c/mesh';
+} from '@rig-c/core/mesh';
 import { type AutoRegionSpec, type AutoSpec, type AutoWeightRegionSpec, type Point, weightsABone } from './config.ts';
 import { type ContourChainRibs, type ContourMesh, contourMesh, type ContourReport, GRID } from './contour.ts';
 import { type HeatField, heatInfluences } from './heat.ts';

package/src/automotion.ts

@@ -2,7 +2,7 @@
  * The motion gate of the automatic mesh mode (issue #126, item 3): a reduced
  * mesh is written only when it moves like the mesh it was reduced from, on the
  * rig's own idle, measured by rig-c's `compareMeshesInMotion`
- * (`rig-c/meshcompare`, 2.29.x) and held to the bounds the author wrote in
+ * (`@rig-c/core/meshcompare`, 2.29.x) and held to the bounds the author wrote in
  * `meshes.<part>.auto.motion` (`AutoMotionSpec`, `src/config.ts`).
  *
  * ## What is compared
@@ -83,8 +83,8 @@
  *
  * Pure: no clock, no randomness, nothing read or written.
  */
-import { type AcceptedOperation, MeshReductionError, type AlphaMask, type ArtFitBounds, type MeasureRow, type MeshQualityReport, type MotionAmplitude, type MotionBounds, type MotionSchedule, writeMeshQualityReport } from 'rig-c/mesh';
-import { compareMeshesInMotion, comparePreparedMotion, prepareMotionReference, type MotionComparisonInput, type MotionReferenceInput, type PreparedMotionReference } from 'rig-c/meshcompare';
+import { type AcceptedOperation, MeshReductionError, type AlphaMask, type ArtFitBounds, type MeasureRow, type MeshQualityReport, type MotionAmplitude, type MotionBounds, type MotionSchedule, writeMeshQualityReport } from '@rig-c/core/mesh';
+import { compareMeshesInMotion, comparePreparedMotion, prepareMotionReference, type MotionComparisonInput, type MotionReferenceInput, type PreparedMotionReference } from '@rig-c/core/meshcompare';
 import type { AutoMotionSpec } from './config.ts';
 import type { Problem } from './errors.ts';
 import { IDLE_FPS, type MotionSpec, type MotionTrack } from './motion.ts';

package/src/autoreplay.ts

@@ -52,7 +52,7 @@
  * (`src/build.ts`), the one place this package runs rigc. Pure: no clock, no
  * randomness, nothing read or written.
  */
-import type { AcceptedOperation, MeasureRow, MeshQualityReport, MotionSchedule, ReducedMesh } from 'rig-c/mesh';
+import type { AcceptedOperation, MeasureRow, MeshQualityReport, MotionSchedule, ReducedMesh } from '@rig-c/core/mesh';
 import { autoVerdict, terminationText } from './automesh.ts';
 import { idleSchedule, localRow, motionRowText } from './automotion.ts';
 import type { Problem } from './errors.ts';

package/src/build.ts

@@ -78,7 +78,7 @@ import {
 import { besideIdleLine, checkSummaryLine, inputFileRecord, type InputFileRecord, CLOTH_LINE, type ClothLine, clothWarnText, frameRuns, MOTION_SEAM_LINE, type MotionSeamLine, type MotionSeamPlant, motionSeamWarnText, FOLD_LINE, type FoldsLine, LEVEL_LINE, type LevelLine, LIMB_LINE, type LimbLine, STRESS_LINE, SWEEP_LINE, type SweepLine, buildGateLines, causeLines, environmentLine, IDLE_FPS, IDLE_MAX_PX, maxRgbDiff, REQUIREMENTS_DIR, type CheckReport, type PackLine, DEFAULT_PACK_SHAPE, DEFAULT_PAGE_EDGES, GATE_PROFILE, JUDGEMENT_LINES, type JudgementLine, packedBuildArgs, packedBuildLabel, type PackMode, readCheckEnvironment, readWindBand, type PackShape, type PageEdges, readFrameSet, rigcFailed, rigcIdentity, rigcRanClause, REPORTED_LINES, type ReportedLine, type RigcRunner, runCheck, SEAM_DIR, SEAM_MEAN_BAR, seamPairText, seamRigPxText, SOURCE_LINE, SEAM_PX_BAR, SEAM_PX_LEVEL, SEAM_PX_LEVEL_HIGH, SPINEBOY_YARDSTICK, STILL_DIR, WIND_BAND_LINE, windBandLines } from './check.ts';
 import { type Cut, type Extend, type Limb, loadConfigAndAnimations, loadConfigWithBytes, loadEarlyConfig, type Patch, type PlanEntry } from './config.ts';
 import { coreCompileGuideLine, failLine, PartsError, type Problem, refuseIfAny } from './errors.ts';
-import type { MeshQualityReport, MotionSchedule } from 'rig-c/mesh';
+import type { MeshQualityReport, MotionSchedule } from '@rig-c/core/mesh';
 import { encodeGif } from './gif.ts';
 import { CONTROL_SUFFIX, withAnimations } from './motion.ts';
 import type { PaletteError } from './palette.ts';

package/src/check.ts

@@ -80,7 +80,7 @@ import { baseAnchorMoves, type AnchorRegion } from './baseanchor.ts';
  */
 import { createHash } from 'node:crypto';
 import { createRequire } from 'node:module';
-import type { Viewport as RootCoverageViewport } from 'rig-c/render-shared';
+import type { Viewport as RootCoverageViewport } from '@rig-c/core/render-shared';
 import { copyFileSync, cpSync, existsSync, mkdirSync, readdirSync, readFileSync, renameSync, rmSync, statSync, writeFileSync } from 'node:fs';
 import { basename, delimiter, dirname, isAbsolute, join, relative, resolve, sep } from 'node:path';
 import { measureRecomposite, type RecompositeFigures, recompositeRecord, scenePhrase, sourceInRig } from './assemble.ts';
@@ -164,9 +164,9 @@ import {
   type SeamPair,
   stretchRequirementLine,
 } from './requirements.ts';
-import { RIG_BONE_INHERIT, type RigSpec as RigcRigSpec } from 'rig-c/src/rig.ts';
-import { expandStops } from 'rig-c/src/stop.ts';
-import { ENVIRONMENT_SPEC, EnvironmentError, environmentResponse, readEnvironmentSchedule } from 'rig-c/src/environment.ts';
+import { RIG_BONE_INHERIT, type RigSpec as RigcRigSpec } from '@rig-c/core/src/rig.ts';
+import { expandStops } from '@rig-c/core/src/stop.ts';
+import { ENVIRONMENT_SPEC, EnvironmentError, environmentResponse, readEnvironmentSchedule } from '@rig-c/core/src/environment.ts';
 import { ART_ALPHA } from './mesh.ts';
 import { connectedComponents } from './raster/components.ts';
 import { alphaComposite } from './raster/composite.ts';
@@ -531,7 +531,7 @@ export function findRigc(from: string, pathVar: string, platform: 'win32' | 'pos
       object: 'the rig-c CLI `rigc`',
       detail: platform === 'win32'
         ? 'found at none of ' + looked.join(', ') + ' nor PATH candidates [' + onPath.join(', ') + ']; executable shapes rigc, rigc.exe were looked for; rigc.bunx alone is not executable; bun install supplies this dependency'
-        : `found at none of ${directories} node_modules/.bin/rigc path(s) from ${resolve(from)} up (nearest ${looked[0]}) nor on PATH; rig-c is this package's dependency — \`bun install\` puts it at node_modules/.bin/rigc`,
+        : `found at none of ${directories} node_modules/.bin/rigc path(s) from ${resolve(from)} up (nearest ${looked[0]}) nor on PATH; @rig-c/core is this package's dependency — \`bun install\` puts it at node_modules/.bin/rigc`,
     },
   ]);
   return '';
@@ -1919,14 +1919,14 @@ export interface SeamStateBounds {
  * follows rigc's own package-root resolution. No candidate error selects a
  * different API. Importing check, or constructing a root-free reader, loads none.
  */
-type OfficialRenderer = typeof import('rig-c/render-shared');
+type OfficialRenderer = typeof import('@rig-c/core/render-shared');
 function officialRenderer(): OfficialRenderer {
   const require = createRequire(import.meta.url);
-  const coreRoot = dirname(require.resolve('rig-c/package.json'));
+  const coreRoot = dirname(require.resolve('@rig-c/core/package.json'));
   let runtimePresent = false;
   try { require.resolve('@esotericsoftware/spine-core/package.json', { paths: [coreRoot] }); runtimePresent = true; } catch { /* Optional runtime is absent, as in rigc's launcher. */ }
-  if (runtimePresent) require('rig-c/render');
-  return require('rig-c/render-shared') as OfficialRenderer;
+  if (runtimePresent) require('@rig-c/core/render');
+  return require('@rig-c/core/render-shared') as OfficialRenderer;
 }
 
 /** One decoder/poser lifetime per state; retain only finite bounds and identities, never atlas pages or rasters. */

package/src/config.ts

@@ -88,7 +88,7 @@ import type { DepthConfig } from './depthsheets.ts';
  */
 import { existsSync, readFileSync, statSync } from 'node:fs';
 import { dirname, resolve } from 'node:path';
-import { RIG_BONE_INHERIT, RIG_SKIN_CONSTRAINT_KEYS, type RigBoneInherit, type RigConstraint, type RigSkinConstraintKey, type RigStop } from 'rig-c/src/rig.ts';
+import { RIG_BONE_INHERIT, RIG_SKIN_CONSTRAINT_KEYS, type RigBoneInherit, type RigConstraint, type RigSkinConstraintKey, type RigStop } from '@rig-c/core/src/rig.ts';
 import { pyRound } from './round.ts';
 import { motionSeamProblems, type MotionSeamDeclaration } from './motionseams.ts';
 import { REQUIREMENTS_SPEC } from './requirements.ts';
@@ -360,7 +360,7 @@ export type MeshSpec = (LatticeMeshSpec | ContourMeshSpec | AutoMeshSpec | Influ
 /**
  * One mesh in the influence mode (issue #378): rig-c's `segments` lattice over the part at `cell` px, every vertex
  * pulled by every chain link within `radius` px of it, falling to zero there (`shape`), the strongest `max` kept —
- * `buildSegmentsLattice` and `influenceShares` from `rig-c/mesh`, promised for this call (rig-c/core#1450), so the
+ * `buildSegmentsLattice` and `influenceShares` from `@rig-c/core/mesh`, promised for this call (rig-c/core#1450), so the
  * rule is core's and the mesh is written with explicit weights like every other mode (`src/rig.ts`). `segments`
  * names the links as in every mode; each entry is one of rig-c's `bones` entries, which `across: false` keeps apart.
  * `hold_tip: true` (issue #615, optional, written by `propose --cloth` from the recipe's `split.hold_tip`) smooths the
@@ -582,7 +582,7 @@ export type ContourRegionSpec =
 /**
  * One mesh in the automatic mode (issue #126, item 2): the contour mesh over
  * the part at alpha 1 and above is the source, and rig-c's `reduceMesh`
- * (`rig-c/mesh`, 2.28.x) refines it inside the declared regions and
+ * (`@rig-c/core/mesh`, 2.28.x) refines it inside the declared regions and
  * removes what the declared bounds allow (`src/automesh.ts`); the result is
  * kept only when its motion passes `motion` (`src/automotion.ts`). Every quality
  * input is a number the author wrote, named as rig-c's contract

package/src/contour.ts

@@ -161,7 +161,7 @@ import {
   simplifyClosedPolygon,
   traceAlphaOutline,
   traceOutline,
-} from 'rig-c/mesh';
+} from '@rig-c/core/mesh';
 
 /** Grid units per pixel: every coordinate this module writes is an integer multiple of 1/GRID px. */
 export const GRID = 256;

package/src/coords.ts

@@ -22,7 +22,7 @@
  * `flattenRig` goes back through `toWorld`. No rotation matrix is written out
  * by hand in this package.
  */
-import { cropToSpineY } from 'rig-c/src/transform.ts';
+import { cropToSpineY } from '@rig-c/core/src/transform.ts';
 
 /** A painting point on the accepted integer rig canvas, in setup-world coordinates. */
 export function paintingToSetupPoint(point: readonly number[], sourceSize: readonly number[], rigSize: readonly number[]): [number, number] {
@@ -34,5 +34,5 @@ export function setupToPaintingPoint(point: readonly number[], sourceSize: reado
   return [(point[0] + rigSize[0] / 2) / (rigSize[0] / sourceSize[0]), cropToSpineY(point[1], rigSize[1]) / (rigSize[1] / sourceSize[1])];
 }
 
-export { computeExactFrameTransforms, computeWorldTransforms, cropToSpineY, normaliseDegrees, toBoneLocal, toBoneLocalVector, toWorld } from 'rig-c/src/transform.ts';
-export type { BoneTransform } from 'rig-c/src/transform.ts';
+export { computeExactFrameTransforms, computeWorldTransforms, cropToSpineY, normaliseDegrees, toBoneLocal, toBoneLocalVector, toWorld } from '@rig-c/core/src/transform.ts';
+export type { BoneTransform } from '@rig-c/core/src/transform.ts';

package/src/meshdraft.ts

@@ -52,7 +52,7 @@
  * ## The one poser
  *
  * Every reading is rig-c's: the bars are `check`'s, through the injected {@link RigcRunner}; readings 2–4 are
- * `compareMeshesInMotion` (`rig-c/meshcompare`) over the model documents of three unpacked gate builds — the drafted
+ * `compareMeshesInMotion` (`@rig-c/core/meshcompare`) over the model documents of three unpacked gate builds — the drafted
  * rig with every candidate part's attachment set to its lattice, to its candidate and to its dense reference, and
  * nothing else different — whose motion carries the bend animations. This module poses nothing.
  *
@@ -61,9 +61,9 @@
  */
 import { existsSync, mkdirSync, readdirSync, readFileSync, rmSync, writeFileSync } from 'node:fs';
 import { dirname, isAbsolute, join, resolve } from 'node:path';
-import type { AlphaMask, MeasureRow, MeshQualityReport, MotionSchedule } from 'rig-c/mesh';
-import { compareMeshesInMotion, type MotionComparisonInput } from 'rig-c/meshcompare';
-import { MeshReductionError } from 'rig-c/mesh';
+import type { AlphaMask, MeasureRow, MeshQualityReport, MotionSchedule } from '@rig-c/core/mesh';
+import { compareMeshesInMotion, type MotionComparisonInput } from '@rig-c/core/meshcompare';
+import { MeshReductionError } from '@rig-c/core/mesh';
 import { explicitFrameId, idleSchedule } from './automotion.ts';
 import { checkStage, gateThroughRigc, type Log, RIGC_MODEL_DOCUMENT, rigStage } from './build.ts';
 import { BARS, type CheckReport, type PackShape, type PageEdges, type RigcRunner } from './check.ts';

package/src/motionseampose.ts

@@ -1,5 +1,5 @@
 /** Posed-axis evidence from one stock seam render, never sampled source keys. */
-import type { GeometryFile, GeometryFrame } from 'rig-c/render';
+import type { GeometryFile, GeometryFrame } from '@rig-c/core/render';
 import type { FrameSet } from './check.ts';
 import { PartsError } from './errors.ts';
 

package/src/propose.ts

@@ -131,7 +131,7 @@ import { explicitWeightRows, regionBone, type RegionSpec } from './config.ts';
  */
 import { existsSync } from 'node:fs';
 import { join } from 'node:path';
-import { drawText, GLYPH_H } from 'rig-c/tools/font5x7.ts';
+import { drawText, GLYPH_H } from '@rig-c/core/tools/font5x7.ts';
 import { type BoneEntry, type CharacterConfig, type ConfigConstraint, type ConfigStop, contourRegionsOf, deriveBustRegions, type Limb, type MeshSpec, type PartBinding, parseConfig, type Point, type Segment, type SkeletonSections, turnRidersByBone } from './config.ts';
 export { contourRegionsOf, deriveBustRegions };
 import { computeExactFrameTransforms, cropToSpineY, normaliseDegrees, toWorld } from './coords.ts';

package/src/raster/png.ts

@@ -18,8 +18,8 @@
  * map to omit these paths, this import is what breaks, by name, and
  * `bun run smoke` is where that is seen first.
  */
-import { assertPng } from 'rig-c/src/png.ts';
-import { decodePng, encodePng } from 'rig-c/tools/plate.ts';
+import { assertPng } from '@rig-c/core/src/png.ts';
+import { decodePng, encodePng } from '@rig-c/core/tools/plate.ts';
 import { readFileSync, writeFileSync } from 'node:fs';
 import { type FloatImage, newFloatImage, newRaster, type Raster, RasterError } from './types.ts';
 

package/src/remesh.ts

@@ -75,8 +75,8 @@ import { applyMeshEdit, type DeltaApplied, type DeltaPlant, deltaSourceProblems,
 import { DEFAULT_IDLE_KEYS, type IdleKeys, type MeshAttachment, meshBoundBones, rigJsonText, type RigSpec } from './rig.ts';
 import { readRequirements } from './requirements.ts';
 import { pyRound } from './round.ts';
-import { type RigSpec as RigcRigSpec } from 'rig-c/src/rig.ts';
-import { expandStops } from 'rig-c/src/stop.ts';
+import { type RigSpec as RigcRigSpec } from '@rig-c/core/src/rig.ts';
+import { expandStops } from '@rig-c/core/src/stop.ts';
 
 /** The provenance file's spec. */
 export const REMESH_SPEC = 'rig-parts-remesh/1';

package/src/requirements.ts

@@ -47,8 +47,8 @@
  */
 import { existsSync, readFileSync, statSync } from 'node:fs';
 import { resolve } from 'node:path';
-import { CompileError } from 'rig-c/src/errors.ts';
-import { splitRigSkin, type RigSkin } from 'rig-c/src/rig.ts';
+import { CompileError } from '@rig-c/core/src/errors.ts';
+import { splitRigSkin, type RigSkin } from '@rig-c/core/src/rig.ts';
 import { cropToSpineY } from './coords.ts';
 import type { Problem } from './errors.ts';
 import { refuseIfAny } from './errors.ts';

package/src/rig.ts

@@ -138,15 +138,15 @@ import { explicitAttachment, type ExplicitMeshReport } from './explicitmesh.ts';
  * order the objects are built in, and every number is rounded by `pyRound`).
  */
 import { type AutoSpec, type BoneEntry, type InfluenceMeshSpec, type WeightRule, type CharacterConfig, type ConfigConstraint, type ConfigStop, CONSTRAINT_FOLLOWS, constraintForRig, contourRegionsOf, type ContourSpec, DEFAULT_BUST_BONE_L, DEFAULT_BUST_BONE_R, type Point, type RibsSpec, ROOT_BONE, stopForRig, turnRidersByBone, weightsABone } from './config.ts';
-import { RUNTIME_PI } from 'rig-c/src/core/world.ts';
+import { RUNTIME_PI } from '@rig-c/core/src/core/world.ts';
 import { type BoneTransform, computeExactFrameTransforms, computeWorldTransforms, cropToSpineY, normaliseDegrees, paintingToSetupPoint, setupToPaintingPoint, toBoneLocal, toWorld } from './coords.ts';
 import { type Problem, refuseIfAny, PartsError } from './errors.ts';
 import { recordedFocusProblems } from './setfocus.ts';
 import { eyeLineDegrees } from './headframe.ts';
-import type { RigBoneInherit, RigStop } from 'rig-c/src/rig.ts';
-import { f32 } from 'rig-c/compile';
-import type { MeshCounts, MeshQualityReport, MeshReductionInput, MotionAmplitude, ReducedMesh, Termination } from 'rig-c/mesh';
-import { bindWeightedVertices, buildGridMesh, buildSegmentsLattice, type EntrySegment, influenceShares, segmentDistance as rigcSegmentDistance, type SegmentsLattice, type SegmentsLatticeReport } from 'rig-c/mesh';
+import type { RigBoneInherit, RigStop } from '@rig-c/core/src/rig.ts';
+import { f32 } from '@rig-c/core/compile';
+import type { MeshCounts, MeshQualityReport, MeshReductionInput, MotionAmplitude, ReducedMesh, Termination } from '@rig-c/core/mesh';
+import { bindWeightedVertices, buildGridMesh, buildSegmentsLattice, type EntrySegment, influenceShares, segmentDistance as rigcSegmentDistance, type SegmentsLattice, type SegmentsLatticeReport } from '@rig-c/core/mesh';
 import { type AmplitudeRow, amplitudeRow, partAmplitude, withAmplitude } from './autoamplitude.ts';
 import { type ResidualRow, residualRow, slotEnvelope, withSkinning } from './autoenvelope.ts';
 import { type AutoMotionCase, type AutoSearch, DEFORM_MAY_FOLD_WHY, type MotionDeformation, type StimulusPose, stimulusAnimationNames } from './automotion.ts';

package/src/scene.ts

@@ -93,7 +93,7 @@
  */
 import { existsSync, mkdirSync, readFileSync, rmSync, statSync, writeFileSync } from 'node:fs';
 import { dirname, join, resolve } from 'node:path';
-import type { RigStop } from 'rig-c/src/rig.ts';
+import type { RigStop } from '@rig-c/core/src/rig.ts';
 import { checkStage, gateThroughRigc, type Log } from './build.ts';
 import { ACCEPTABLE_BARS, barsNotMet, type CheckReport, DEFAULT_PACK_SHAPE, DEFAULT_PAGE_EDGES, type PackMode, requirementsNotPass, type RigcRunner } from './check.ts';
 import { CONSTRAINT_BONE_FIELDS, ROOT_BONE } from './config.ts';

package/src/sheet.ts

@@ -18,7 +18,7 @@
  */
 import { existsSync } from 'node:fs';
 import { basename, dirname, join } from 'node:path';
-import { drawText, GLYPH_H } from 'rig-c/tools/font5x7.ts';
+import { drawText, GLYPH_H } from '@rig-c/core/tools/font5x7.ts';
 import { type Problem, refuseIfAny } from './errors.ts';
 import { type LayerSet, OPAQUE_ALPHA_ABOVE, readLayers } from './layers.ts';
 import { readParts } from './parts.ts';

package/src/structure.ts

@@ -71,8 +71,8 @@ import { explicitWeightRows, regionBone } from './config.ts';
  * Pure but for reading the three files it is handed.
  */
 import { existsSync, readFileSync } from 'node:fs';
-import { CompileError } from 'rig-c/src/errors.ts';
-import { parseRigSpec, RIG_SPEC_VERSION, type RigBone as RigcBone, type RigSpec as RigcSpec, splitRigSkin } from 'rig-c/src/rig.ts';
+import { CompileError } from '@rig-c/core/src/errors.ts';
+import { parseRigSpec, RIG_SPEC_VERSION, type RigBone as RigcBone, type RigSpec as RigcSpec, splitRigSkin } from '@rig-c/core/src/rig.ts';
 import { type ConfigConstraint, CONSTRAINT_FOLLOWS, contourRegionsOf, parseConfig, parseProposalSections, type Point, ROOT_BONE, type SkeletonSections, weightsABone } from './config.ts';
 import { computeExactFrameTransforms, cropToSpineY, normaliseDegrees, toWorld } from './coords.ts';
 import { PartsError, type Problem, refuseIfAny } from './errors.ts';

package/src/turn.ts

@@ -36,8 +36,8 @@ import { pyRound } from './round.ts';
 import { turnOverlapOwners } from './turnoverlap.ts';
 import { sampleTurnTriangleField, turnTriangleCoordinates } from './turnfield.ts';
 import { PartsError } from './errors.ts';
-import { f32 } from 'rig-c/compile';
-import { evaluateDeformTransform } from 'rig-c/src/deformgen.ts';
+import { f32 } from '@rig-c/core/compile';
+import { evaluateDeformTransform } from '@rig-c/core/src/deformgen.ts';
 
 /**
  * The layers that ride on the face (issue #271): See-through makes no depth

package/src/turnoverlap.ts

@@ -1,5 +1,5 @@
 /** Source-alpha overlap selects turn fields, never skin bindings. */
-import { DRAWN_ALPHA } from 'rig-c/src/passthrough.ts';
+import { DRAWN_ALPHA } from '@rig-c/core/src/passthrough.ts';
 import { computeWorldTransforms, setupToPaintingPoint, toWorld } from './coords.ts';
 import type { Depth25DTurnOptions } from './turn.ts';
 import type { Problem } from './errors.ts';

package/src/waistmesh.ts

@@ -4,7 +4,7 @@ import { PartsError } from './errors.ts';
 import { counterClockwiseInSpineWorld, type LatticeMesh } from './mesh.ts';
 import type { MeshAttachment, RegionAttachment, RigBone, WeightEntry } from './rig.ts';
 import { pyRound } from './round.ts';
-import { f32 } from 'rig-c/compile';
+import { f32 } from '@rig-c/core/compile';
 
 type Q = readonly [bigint, bigint];
 type P = readonly [Q, Q];

package/tools/build-process.ts

@@ -14,11 +14,11 @@ export function selectedRigcCommand(bin: string, platform: NodeJS.Platform = pro
     const selected = resolve(bin);
     // findRigc selected this exact local .bin path; do not resolve an ambient package.
     if (basename(selected) !== 'rigc' || basename(dirname(selected)) !== '.bin') return fail('unknown or custom script shim');
-    const packageRoot = join(dirname(dirname(selected)), 'rig-c');
+    const packageRoot = join(dirname(dirname(selected)), '@rig-c', 'core');
     const manifest = JSON.parse(readFileSync(join(packageRoot, 'package.json'), 'utf8')) as { name?: unknown; bin?: unknown };
     const binMap = manifest.bin;
     const declared = typeof binMap === 'string' ? binMap : binMap !== null && typeof binMap === 'object' ? (binMap as Record<string, unknown>).rigc : undefined;
-    if (manifest.name !== 'rig-c' || typeof declared !== 'string') return fail('the selected package does not declare rigc');
+    if (manifest.name !== '@rig-c/core' || typeof declared !== 'string') return fail('the selected package does not declare rigc');
     const entry = resolve(packageRoot, declared);
     const within = relative(realpathSync.native(packageRoot), realpathSync.native(entry));
     if (within === '..' || within.startsWith('..' + sep) || isAbsolute(within) || !statSync(entry).isFile()) return fail('bin target is outside the selected package');