reze-engine 0.41.0 → 0.41.2

package/dist/shaders/materials/nodes.d.ts

@@ -1,2 +1,2 @@
-export declare const NODES_WGSL = "\n\n// Baked 64\u00D764 rgba8unorm combined BRDF LUT \u2014 created once at engine init by dfg_lut.ts.\n//   .rg = split-sum DFG (Karis: tint = f0\u00B7x + f90\u00B7y)  \u2192 F_brdf_*_scatter\n//   .ba = Heitz 2016 LTC magnitude (ltc_mag_ggx)       \u2192 ltc_brdf_scale_from_lut\n// Paired with group(0) binding(2) diffuseSampler (linear filter). Sample once per\n// fragment via brdf_lut_sample() \u2014 callers feed .rg and the whole vec4 into the\n// helpers below, halving LUT taps on the default Principled path.\n@group(0) @binding(9) var brdfLut: texture_2d<f32>;\n\n// \u2500\u2500\u2500 RGB \u2194 HSV \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn rgb_to_hsv(rgb: vec3f) -> vec3f {\n  let c_max = max(rgb.r, max(rgb.g, rgb.b));\n  let c_min = min(rgb.r, min(rgb.g, rgb.b));\n  let delta = c_max - c_min;\n\n  var h = 0.0;\n  if (delta > 1e-6) {\n    if (c_max == rgb.r) {\n      h = (rgb.g - rgb.b) / delta;\n      if (h < 0.0) { h += 6.0; }\n    } else if (c_max == rgb.g) {\n      h = 2.0 + (rgb.b - rgb.r) / delta;\n    } else {\n      h = 4.0 + (rgb.r - rgb.g) / delta;\n    }\n    h /= 6.0;\n  }\n  let s = select(0.0, delta / c_max, c_max > 1e-6);\n  return vec3f(h, s, c_max);\n}\n\nfn hsv_to_rgb(hsv: vec3f) -> vec3f {\n  let h = hsv.x;\n  let s = hsv.y;\n  let v = hsv.z;\n  if (s < 1e-6) { return vec3f(v); }\n\n  let hh = fract(h) * 6.0;\n  let sector = u32(hh);\n  let f = hh - f32(sector);\n  let p = v * (1.0 - s);\n  let q = v * (1.0 - s * f);\n  let t = v * (1.0 - s * (1.0 - f));\n\n  switch (sector) {\n    case 0u: { return vec3f(v, t, p); }\n    case 1u: { return vec3f(q, v, p); }\n    case 2u: { return vec3f(p, v, t); }\n    case 3u: { return vec3f(p, q, v); }\n    case 4u: { return vec3f(t, p, v); }\n    default: { return vec3f(v, p, q); }\n  }\n}\n\n// \u2500\u2500\u2500 HUE_SAT node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn hue_sat(hue: f32, saturation: f32, value: f32, fac: f32, color: vec3f) -> vec3f {\n  var hsv = rgb_to_hsv(color);\n  hsv.x = fract(hsv.x + hue - 0.5);\n  hsv.y = clamp(hsv.y * saturation, 0.0, 1.0);\n  hsv.z *= value;\n  return mix(color, hsv_to_rgb(hsv), fac);\n}\n\n// hue_sat specialization for hue=0.5 (identity hue shift \u2014 fract(h + 0.5 - 0.5) = h).\n// Branchless equivalent that skips the rgb_to_hsv \u2192 hsv_to_rgb roundtrip: WebKit's\n// Metal backend serializes the 3-way if chain in rgb_to_hsv and the 6-way switch in\n// hsv_to_rgb, where this form compiles to linear SIMD ops + a single select.\nfn hue_sat_id(saturation: f32, value: f32, fac: f32, color: vec3f) -> vec3f {\n  let m = max(max(color.r, color.g), color.b);\n  let n = min(min(color.r, color.g), color.b);\n  // Unclamped (sat*old_s \u2264 1): reproj = mix(vec3f(m), color, saturation).\n  // Clamped (saturated to 1):   reproj = (color - n) * m / (m - n).\n  let range = max(m - n, 1e-6);\n  let unclamped = mix(vec3f(m), color, saturation);\n  let clamped = (color - vec3f(n)) * m / range;\n  let needs_clamp = (m - n) * saturation >= m;\n  let reproj = select(unclamped, clamped, needs_clamp);\n  return mix(color, reproj * value, fac);\n}\n\n// \u2500\u2500\u2500 BRIGHTCONTRAST node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn bright_contrast(color: vec3f, bright: f32, contrast: f32) -> vec3f {\n  let a = 1.0 + contrast;\n  let b = bright - contrast * 0.5;\n  return max(vec3f(0.0), color * a + vec3f(b));\n}\n\n// \u2500\u2500\u2500 INVERT node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn invert(fac: f32, color: vec3f) -> vec3f {\n  return mix(color, vec3f(1.0) - color, fac);\n}\n\nfn invert_f(fac: f32, val: f32) -> f32 {\n  return mix(val, 1.0 - val, fac);\n}\n\n// \u2500\u2500\u2500 Color ramp (VALTORGB) \u2014 2-stop variants \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// All 7 presets use exclusively 2-stop ramps.\n\nfn ramp_constant(f: f32, p0: f32, c0: vec4f, p1: f32, c1: vec4f) -> vec4f {\n  return select(c0, c1, f >= p1);\n}\n\n// CONSTANT ramp with screen-space edge AA \u2014 kills sparkle where fwidth(f) straddles a hard step (NPR terminator)\nfn ramp_constant_edge_aa(f: f32, edge: f32, c0: vec4f, c1: vec4f) -> vec4f {\n  let w = max(fwidth(f) * 1.75, 6e-6);\n  let t = smoothstep(edge - w, edge + w, f);\n  return mix(c0, c1, t);\n}\n\nfn ramp_linear(f: f32, p0: f32, c0: vec4f, p1: f32, c1: vec4f) -> vec4f {\n  let t = saturate((f - p0) / max(p1 - p0, 1e-6));\n  return mix(c0, c1, t);\n}\n\nfn ramp_cardinal(f: f32, p0: f32, c0: vec4f, p1: f32, c1: vec4f) -> vec4f {\n  // cardinal spline with 2 stops degrades to smoothstep\n  let t = saturate((f - p0) / max(p1 - p0, 1e-6));\n  let ss = t * t * (3.0 - 2.0 * t);\n  return mix(c0, c1, ss);\n}\n\n// \u2500\u2500\u2500 MATH node operations \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn math_add(a: f32, b: f32) -> f32 { return a + b; }\nfn math_multiply(a: f32, b: f32) -> f32 { return a * b; }\nfn math_power(a: f32, b: f32) -> f32 { return pow(max(a, 0.0), b); }\nfn math_greater_than(a: f32, b: f32) -> f32 { return select(0.0, 1.0, a > b); }\n\n// Blender's implicit Color \u2192 Float socket conversion uses BT.601 grayscale\n// (rgb_to_grayscale in blenkernel/intern/node.cc). When a material graph plugs a\n// Color output into a Math node's Value input, this is the scalar it actually sees.\nfn color_to_value(c: vec3f) -> f32 {\n  return 0.299 * c.r + 0.587 * c.g + 0.114 * c.b;\n}\n\n// \u2500\u2500\u2500 MIX node (blend_type variants) \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn mix_blend(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  return mix(a, b, fac);\n}\n\nfn mix_overlay(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  let lo = 2.0 * a * b;\n  let hi = vec3f(1.0) - 2.0 * (vec3f(1.0) - a) * (vec3f(1.0) - b);\n  let overlay = select(hi, lo, a < vec3f(0.5));\n  return mix(a, overlay, fac);\n}\n\nfn mix_multiply(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  return mix(a, a * b, fac);\n}\n\nfn mix_lighten(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  return mix(a, max(a, b), fac);\n}\n\n// Blender Mix (Color) blend LINEAR_LIGHT: result = mix(A, A + 2*B - 1, Fac)\nfn mix_linear_light(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  return mix(a, a + 2.0 * b - vec3f(1.0), fac);\n}\n\n// Luminance for Shader\u2192RGB scalar gates (linear RGB, Rec.709 weights)\nfn luminance_rec709_linear(c: vec3f) -> f32 {\n  return dot(max(c, vec3f(0.0)), vec3f(0.2126, 0.7152, 0.0722));\n}\n\n// \u2500\u2500\u2500 FRESNEL node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Schlick approximation matching Blender's Fresnel node\n\nfn fresnel(ior: f32, n: vec3f, v: vec3f) -> f32 {\n  let r = (ior - 1.0) / (ior + 1.0);\n  let f0 = r * r;\n  let cos_theta = clamp(dot(n, v), 0.0, 1.0);\n  let m = 1.0 - cos_theta;\n  let m2 = m * m;\n  let m5 = m2 * m2 * m;\n  return f0 + (1.0 - f0) * m5;\n}\n\n// \u2500\u2500\u2500 LAYER_WEIGHT node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn layer_weight_fresnel(blend: f32, n: vec3f, v: vec3f) -> f32 {\n  let eta = max(1.0 - blend, 1e-4);\n  let r = (1.0 - eta) / (1.0 + eta);\n  let f0 = r * r;\n  let cos_theta = clamp(abs(dot(n, v)), 0.0, 1.0);\n  let m = 1.0 - cos_theta;\n  let m2 = m * m;\n  let m5 = m2 * m2 * m;\n  return f0 + (1.0 - f0) * m5;\n}\n\nfn layer_weight_facing(blend: f32, n: vec3f, v: vec3f) -> f32 {\n  var facing = abs(dot(n, v));\n  let b = clamp(blend, 0.0, 0.99999);\n  if (b != 0.5) {\n    let exponent = select(2.0 * b, 0.5 / (1.0 - b), b >= 0.5);\n    facing = pow(facing, exponent);\n  }\n  return 1.0 - facing;\n}\n\n// \u2500\u2500\u2500 SHADER_TO_RGB (white DiffuseBSDF) \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Eevee captures lit diffuse: (albedo/\u03C0)*sun*N\u00B7L*shadow + ambient (linear). Albedo=1.\n// Matches default.ts direct term scale so VALTORGB thresholds from Blender JSON stay valid.\n\nfn shader_to_rgb_diffuse(n: vec3f, l: vec3f, sun_rgb: vec3f, ambient_rgb: vec3f, shadow: f32) -> f32 {\n  const PI_S: f32 = 3.141592653589793;\n  let ndotl = max(dot(n, l), 0.0);\n  let rgb = sun_rgb * (ndotl * shadow / PI_S) + ambient_rgb;\n  return luminance_rec709_linear(rgb);\n}\n\n// \u2500\u2500\u2500 BUMP node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Screen-space bump from a scalar height field. Needs dFdx/dFdy which\n// WGSL provides as dpdx/dpdy.\n\nfn bump(strength: f32, height: f32, normal: vec3f, world_pos: vec3f) -> vec3f {\n  let dhdx = dpdx(height);\n  let dhdy = dpdy(height);\n  let dpdx_pos = dpdx(world_pos);\n  let dpdy_pos = dpdy(world_pos);\n  let perturbed = normalize(normal) - strength * (dhdx * normalize(cross(dpdy_pos, normal)) + dhdy * normalize(cross(normal, dpdx_pos)));\n  return normalize(perturbed);\n}\n\n// LH engine + WebGPU fragment Y: flip dhdy contribution so height peaks read as outward bumps vs Blender reference\nfn bump_lh(strength: f32, height: f32, normal: vec3f, world_pos: vec3f) -> vec3f {\n  let dhdx = dpdx(height);\n  let dhdy = dpdy(height);\n  let dpdx_pos = dpdx(world_pos);\n  let dpdy_pos = dpdy(world_pos);\n  let perturbed = normalize(normal) - strength * (dhdx * normalize(cross(dpdy_pos, normal)) - dhdy * normalize(cross(normal, dpdx_pos)));\n  return normalize(perturbed);\n}\n\n// \u2500\u2500\u2500 NOISE texture (Perlin-style) \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Simplified gradient noise matching Blender's default noise output.\n\n// PCG-style integer hash. Replaces the classic 'fract(sin(q) * LARGE)' trick because\n// WebKit's Metal backend compiles 'sin' to a full transcendental op (slow), while\n// Safari's Apple-GPU scalar ALU handles int muls/xors near free. Inputs arrive as\n// integer-valued floats (floor(p) + unit offsets) from _noise3, so vec3i cast is exact.\nfn _hash33(p: vec3f) -> vec3f {\n  var h = vec3u(vec3i(p) + vec3i(32768));\n  h = h * vec3u(1664525u, 1013904223u, 2654435761u);\n  h = (h.yzx ^ h) * vec3u(2246822519u, 3266489917u, 668265263u);\n  h = h ^ (h >> vec3u(16u));\n  // Mask to 24 bits \u2014 above that f32 loses precision on the u32\u2192f32 convert.\n  let hm = h & vec3u(16777215u);\n  return vec3f(hm) * (2.0 / 16777216.0) - 1.0;\n}\n\nfn _noise3(p: vec3f) -> f32 {\n  let i = floor(p);\n  let f = fract(p);\n  let u = f * f * (3.0 - 2.0 * f);\n\n  return mix(\n    mix(\n      mix(dot(_hash33(i + vec3f(0,0,0)), f - vec3f(0,0,0)),\n          dot(_hash33(i + vec3f(1,0,0)), f - vec3f(1,0,0)), u.x),\n      mix(dot(_hash33(i + vec3f(0,1,0)), f - vec3f(0,1,0)),\n          dot(_hash33(i + vec3f(1,1,0)), f - vec3f(1,1,0)), u.x), u.y),\n    mix(\n      mix(dot(_hash33(i + vec3f(0,0,1)), f - vec3f(0,0,1)),\n          dot(_hash33(i + vec3f(1,0,1)), f - vec3f(1,0,1)), u.x),\n      mix(dot(_hash33(i + vec3f(0,1,1)), f - vec3f(0,1,1)),\n          dot(_hash33(i + vec3f(1,1,1)), f - vec3f(1,1,1)), u.x), u.y),\n    u.z);\n}\n\nfn tex_noise(p: vec3f, scale: f32, detail: f32, roughness: f32, distortion: f32) -> f32 {\n  var q = p;\n  if (abs(distortion) > 1e-6) {\n    let w = _noise3(p * scale * 1.37 + vec3f(2.31, 5.17, 8.09));\n    q = p + (w * 2.0 - 1.0) * distortion;\n  }\n  let coords = q * scale;\n  var value = 0.0;\n  var amplitude = 1.0;\n  var frequency = 1.0;\n  var total_amp = 0.0;\n  let octaves = i32(clamp(detail, 0.0, 15.0)) + 1;\n  for (var i = 0; i < octaves; i++) {\n    value += amplitude * _noise3(coords * frequency);\n    total_amp += amplitude;\n    amplitude *= roughness;\n    frequency *= 2.0;\n  }\n  return value / max(total_amp, 1e-6) * 0.5 + 0.5;\n}\n\n// tex_noise specialization: detail=2.0 (3 octaves), roughness=0.5, distortion=0.\n// WebKit can't unroll tex_noise's for-loop because 'octaves' is a runtime value;\n// this variant is fully unrolled with constants folded (total_amp = 1.75).\nfn tex_noise_d2(p: vec3f, scale: f32) -> f32 {\n  let c = p * scale;\n  let v = _noise3(c) + 0.5 * _noise3(c * 2.0) + 0.25 * _noise3(c * 4.0);\n  return v * (1.0 / 1.75) * 0.5 + 0.5;\n}\n\n// \u2500\u2500\u2500 TEX_GRADIENT (linear) \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Used by Stockings preset. Maps the input vector's X to a 0\u20131 gradient.\n\nfn tex_gradient_linear(uv: vec3f) -> f32 {\n  return clamp(uv.x, 0.0, 1.0);\n}\n\n// \u2500\u2500\u2500 TEX_VORONOI \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// 3D F1 voronoi. _f1 returns Distance; _color returns per-cell hash color\n// (matches Blender voronoi.cc: outColor = hash_int3_to_float3(cell + targetOffset)).\n\nfn tex_voronoi_f1(p: vec3f, scale: f32) -> f32 {\n  let coords = p * scale;\n  let i = floor(coords);\n  let f = fract(coords);\n  var min_dist = 1e10;\n  for (var z = -1; z <= 1; z++) {\n    for (var y = -1; y <= 1; y++) {\n      for (var x = -1; x <= 1; x++) {\n        let neighbor = vec3f(f32(x), f32(y), f32(z));\n        let point = _hash33(i + neighbor) * 0.5 + 0.5;\n        let diff = neighbor + point - f;\n        min_dist = min(min_dist, dot(diff, diff));\n      }\n    }\n  }\n  return sqrt(min_dist);\n}\n\n// The per-cell jitter hash IS the Color output in Blender \u2014 reuse the same hash\n// tap for jitter + color instead of computing two.\nfn tex_voronoi_color(p: vec3f, scale: f32) -> vec3f {\n  let coords = p * scale;\n  let i = floor(coords);\n  let f = fract(coords);\n  var min_dist = 1e10;\n  var min_hash = vec3f(0.5);\n  for (var z = -1; z <= 1; z++) {\n    for (var y = -1; y <= 1; y++) {\n      for (var x = -1; x <= 1; x++) {\n        let neighbor = vec3f(f32(x), f32(y), f32(z));\n        let h = _hash33(i + neighbor) * 0.5 + 0.5;\n        let diff = neighbor + h - f;\n        let d = dot(diff, diff);\n        if (d < min_dist) {\n          min_dist = d;\n          min_hash = h;\n        }\n      }\n    }\n  }\n  return min_hash;\n}\n\n// \u2500\u2500\u2500 SEPXYZ node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn separate_xyz(v: vec3f) -> vec3f { return v; }\n\n// \u2500\u2500\u2500 VECT_MATH (cross product) \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn vect_math_cross(a: vec3f, b: vec3f) -> vec3f { return cross(a, b); }\n\n// \u2500\u2500\u2500 MAPPING node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Point-type mapping: scale, rotate (euler XYZ), translate.\n\nfn mapping_point(v: vec3f, loc: vec3f, rot: vec3f, scl: vec3f) -> vec3f {\n  var p = v * scl;\n  // simplified: skip rotation when all angles are zero (common case)\n  if (abs(rot.x) + abs(rot.y) + abs(rot.z) > 1e-6) {\n    let cx = cos(rot.x); let sx = sin(rot.x);\n    let cy = cos(rot.y); let sy = sin(rot.y);\n    let cz = cos(rot.z); let sz = sin(rot.z);\n    let rx = vec3f(p.x, cx*p.y - sx*p.z, sx*p.y + cx*p.z);\n    let ry = vec3f(cy*rx.x + sy*rx.z, rx.y, -sy*rx.x + cy*rx.z);\n    p = vec3f(cz*ry.x - sz*ry.y, sz*ry.x + cz*ry.y, ry.z);\n  }\n  return p + loc;\n}\n\n// \u2500\u2500\u2500 NORMAL_MAP node (tangent-space) \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Applies a tangent-space normal map. Requires TBN from vertex stage.\n\nfn normal_map(strength: f32, map_color: vec3f, normal: vec3f, tangent: vec3f, bitangent: vec3f) -> vec3f {\n  let ts = map_color * 2.0 - 1.0;\n  let perturbed = normalize(tangent * ts.x + bitangent * ts.y + normal * ts.z);\n  return normalize(mix(normal, perturbed, strength));\n}\n\n// \u2500\u2500\u2500 EEVEE Principled BSDF primitives \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Ports from Blender 3.6 source/blender/draw/engines/eevee/shaders/\n//   bsdf_common_lib.glsl + gpu_shader_material_principled.glsl.\n// Usage pattern (see material shaders): direct spec = bsdf_ggx \u00D7 sun \u00D7 shadow\n// (NL baked in, no F yet); ambient spec = probe_radiance; tint both with\n// reflection_color = F_brdf_multi_scatter(f0, f90, split_sum) AFTER summing.\n\nconst EEVEE_PI: f32 = 3.141592653589793;\n\n// Fused analytic GGX specular (direct lights). Returns BRDF \u00D7 NL.\n// 4\u00B7NL\u00B7NV is cancelled via G1_Smith reciprocal form \u2014 see bsdf_common_lib.glsl:115.\n// Caller passes NL, NV (already computed for diffuse + brdf_lut_sample) so WebKit\n// can reuse them instead of recomputing dot products across the function boundary.\nfn bsdf_ggx(N: vec3f, L: vec3f, V: vec3f, NL_in: f32, NV_in: f32, roughness: f32) -> f32 {\n  let a = max(roughness, 1e-4);\n  let a2 = a * a;\n  let H = normalize(L + V);\n  let NH = max(dot(N, H), 1e-8);\n  let NL = max(NL_in, 1e-8);\n  let NV = max(NV_in, 1e-8);\n  // G1_Smith_GGX_opti reciprocal form \u2014 denominator piece only.\n  let G1L = NL + sqrt(NL * (NL - NL * a2) + a2);\n  let G1V = NV + sqrt(NV * (NV - NV * a2) + a2);\n  let G = G1L * G1V;\n  // D_ggx_opti = pi * denom\u00B2 \u2014 reciprocal D \u00D7 a\u00B2.\n  let tmp = (NH * a2 - NH) * NH + 1.0;\n  let D_opti = EEVEE_PI * tmp * tmp;\n  return NL * a2 / (D_opti * G);\n}\n\n// Split-sum DFG LUT \u2014 Karis 2013 curve fit stand-in for the 64\u00D764 baked LUT.\n// Returns (lut.x, lut.y) in Blender convention: tint = f0\u00B7lut.x + f90\u00B7lut.y.\nfn brdf_lut_approx(NV: f32, roughness: f32) -> vec2f {\n  let c0 = vec4f(-1.0, -0.0275, -0.572, 0.022);\n  let c1 = vec4f(1.0, 0.0425, 1.04, -0.04);\n  let r = roughness * c0 + c1;\n  let a004 = min(r.x * r.x, exp2(-9.28 * NV)) * r.x + r.y;\n  return vec2f(-1.04, 1.04) * a004 + r.zw;\n}\n\n// Baked combined BRDF LUT \u2014 exact port of Blender bsdf_lut_frag.glsl packed with\n// ltc_mag_ggx from eevee_lut.c. Single sample returns DFG (.rg) and LTC mag (.ba).\n// Addressed as Blender's common_utiltex_lib.glsl:lut_coords:\n//   coords = (roughness, sqrt(1 - NV)), then half-texel bias for filtering.\n// Requires group(0) binding(9) brdfLut + binding(2) diffuseSampler in the host shader.\nfn brdf_lut_sample(NV: f32, roughness: f32) -> vec4f {\n  let LUT_SIZE: f32 = 64.0;\n  var uv = vec2f(saturate(roughness), sqrt(saturate(1.0 - NV)));\n  uv = uv * ((LUT_SIZE - 1.0) / LUT_SIZE) + 0.5 / LUT_SIZE;\n  return textureSampleLevel(brdfLut, diffuseSampler, uv, 0.0);\n}\n\nfn F_brdf_single_scatter(f0: vec3f, f90: vec3f, lut: vec2f) -> vec3f {\n  return lut.y * f90 + lut.x * f0;\n}\n\n// Fdez-Ag\u00FCera 2019 multi-scatter compensation (EEVEE do_multiscatter=1).\nfn F_brdf_multi_scatter(f0: vec3f, f90: vec3f, lut: vec2f) -> vec3f {\n  let FssEss = lut.y * f90 + lut.x * f0;\n  let Ess = lut.x + lut.y;\n  let Ems = 1.0 - Ess;\n  let Favg = f0 + (1.0 - f0) / 21.0;\n  let Fms = FssEss * Favg / (1.0 - (1.0 - Ess) * Favg);\n  return FssEss + Fms * Ems;\n}\n\n// EEVEE direct-specular energy compensation factor \u2014 closure_eval_glossy_lib.glsl:79-81:\n//   ltc_brdf_scale = (ltc.x + ltc.y) / (split_sum.x + split_sum.y)\n// Blender evaluates direct lights via LTC (Heitz 2016) but indirect via split-sum;\n// direct radiance is rescaled so total-energy matches the split-sum LUT.\n// Takes a pre-sampled vec4f from brdf_lut_sample() to share the fetch with\n// F_brdf_multi_scatter on the same fragment.\nfn ltc_brdf_scale_from_lut(lut: vec4f) -> f32 {\n  return (lut.z + lut.w) / max(lut.x + lut.y, 1e-6);\n}\n\n// Luminance-normalized hue extraction \u2014 Blender tint_from_color (isolates hue+sat).\nfn tint_from_color(color: vec3f) -> vec3f {\n  let lum = dot(color, vec3f(0.3, 0.6, 0.1));\n  return select(vec3f(1.0), color / lum, lum > 0.0);\n}\n\n// \u2500\u2500\u2500 Principled sheen (gpu_shader_material_principled.glsl:8-14) \u2500\u2500\u2500\u2500\n// Empirical NV-only curve that approximates grazing retroreflection on cloth/velvet.\n// Scales the sheen layer's diffuse contribution; no sheen call site has sheen=0\n// shortcut because the multiplier is tiny at normal view angles anyway.\nfn principled_sheen(NV: f32) -> f32 {\n  let f = 1.0 - NV;\n  return f * f * f * 0.077 + f * 0.01 + 0.00026;\n}\n\n// \u2500\u2500\u2500 Principled BSDF eval \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Shared EEVEE Principled path used by every material in the engine \u2014 metallic,\n// dielectric, and sheen variants all fold into these ~15 lines via the struct\n// fields. NPR materials still compute a separate toon/rim/warm stack on top and\n// mix(npr_stack, eval_principled(...), fac); see body.ts / face.ts / etc.\n//\n// Field conventions:\n//   base           \u2014 diffuse albedo. Mixed into f0 only when metallic > 0.\n//   metallic       \u2014 0 = dielectric (f0 from specular), 1 = pure metal (f0 = base).\n//   specular       \u2014 Principled Specular input (0.5 default \u2192 f0 = 0.04). sqrt for f90.\n//   roughness      \u2014 GGX roughness; drives BRDF LUT coord + bsdf_ggx.\n//   spec_clamp     \u2014 EEVEE Light Clamp equivalent. Caps firefly spec from noise-bumped\n//                    NDF aliasing (Blender hides this via TAA which we don't have).\n//                    Pass 1e30 (effectively disabled) for materials that don't bump.\n//   sheen          \u2014 0 disables. Scales the sheen diffuse add; cloth/stockings use ~0.7.\n//   sheen_tint     \u2014 0 = white sheen, 1 = fully tinted by base. Multiplied by sheen,\n//                    so value is don't-care when sheen=0.\n// The PMX sphere map, applied the way MMD applies it: the texture is a\n// VIEW-SPACE lighting mask, sampled by the camera-space normal rather than by\n// any UV the mesh carries, which is why it tracks the viewer and reads as a\n// highlight. The material's own mode picks the operator \u2014 .sph (1) multiplies\n// the shaded base, .spa (2) adds \u2014 so a graph asks for the effect and the model\n// decides which it meant. Mode 0, or a material with no sphere texture (the 1\u00D71\n// white fallback is bound then), is an exact no-op.\nfn pmx_sphere_map(base: vec3f, strength: f32, N: vec3f) -> vec3f {\n  if (material.sphereMode < 0.5) {\n    return base;\n  }\n  let camera_n = safe_normal((camera.view * vec4f(N, 0.0)).xyz);\n  let sphere_uv = clamp(camera_n.xy * 0.5 + vec2f(0.5), vec2f(0.0), vec2f(1.0));\n  let sphere_rgb = textureSample(sphereTexture, diffuseSampler, sphere_uv).rgb;\n  let amount = max(strength, 0.0);\n  if (material.sphereMode < 1.5) {\n    return mix(base, base * sphere_rgb, min(amount, 1.0));\n  }\n  return base + sphere_rgb * amount;\n}\n\nstruct PrincipledIn {\n  base: vec3f,\n  metallic: f32,\n  specular: f32,\n  roughness: f32,\n  spec_clamp: f32,\n  sheen: f32,\n  sheen_tint: f32,\n};\n\nfn eval_principled(\n  p: PrincipledIn,\n  N: vec3f, L: vec3f, V: vec3f,\n  sun_rgb: vec3f, amb_rgb: vec3f, shadow: f32\n) -> vec3f {\n  let NL = max(dot(N, L), 0.0);\n  let NV = max(dot(N, V), 1e-4);\n\n  // f0/f90 per gpu_shader_material_principled.glsl. specular_tint=0 is assumed\n  // (all presets in this engine use the default white dielectric tint).\n  let dielectric_f0 = vec3f(0.08 * p.specular);\n  let f0 = mix(dielectric_f0, p.base, p.metallic);\n  let f90 = mix(f0, vec3f(1.0), sqrt(p.specular));\n\n  // Single LUT tap feeds both F_brdf_multi_scatter (split-sum DFG) and\n  // ltc_brdf_scale_from_lut (LTC mag in .ba). See nodes.ts brdf_lut_sample.\n  let lut = brdf_lut_sample(NV, p.roughness);\n  let reflection_color = F_brdf_multi_scatter(f0, f90, lut.xy);\n\n  // Direct glossy \u2014 bsdf_ggx already includes NL; no F applied here (tinted after\n  // accum with reflection_color). ltc_brdf_scale rescales direct to match the\n  // split-sum indirect path, matching EEVEE closure_eval_glossy_lib behavior.\n  let spec_direct_raw = bsdf_ggx(N, L, V, NL, NV, p.roughness)\n                       * sun_rgb * shadow * ltc_brdf_scale_from_lut(lut);\n  let spec_direct = min(spec_direct_raw, vec3f(p.spec_clamp));\n  let spec_indirect = amb_rgb;\n  let spec_radiance = (spec_direct + spec_indirect) * reflection_color;\n\n  // Sheen add \u2014 when p.sheen=0 the whole term collapses, leaving diffuse_color=base.\n  let base_tint = tint_from_color(p.base);\n  let sheen_color = mix(vec3f(1.0), base_tint, p.sheen_tint);\n  let diffuse_color = p.base + p.sheen * sheen_color * principled_sheen(NV);\n\n  // diffuse_weight = (1-metallic). Indirect diffuse uses amb (L_w) with no \u03C0 factor\n  // (probe_evaluate_world_diff returns SH-projected radiance, not cosine-convolved).\n  let diffuse_weight = 1.0 - p.metallic;\n  let diffuse_radiance = diffuse_color * (sun_rgb * NL * shadow / EEVEE_PI + amb_rgb) * diffuse_weight;\n\n  return diffuse_radiance + spec_radiance;\n}\n\n";
+export declare const NODES_WGSL = "\n\n// Baked 64\u00D764 rgba8unorm combined BRDF LUT \u2014 created once at engine init by dfg_lut.ts.\n//   .rg = split-sum DFG (Karis: tint = f0\u00B7x + f90\u00B7y)  \u2192 F_brdf_*_scatter\n//   .ba = Heitz 2016 LTC magnitude (ltc_mag_ggx)       \u2192 ltc_brdf_scale_from_lut\n// Paired with group(0) binding(2) diffuseSampler (linear filter). Sample once per\n// fragment via brdf_lut_sample() \u2014 callers feed .rg and the whole vec4 into the\n// helpers below, halving LUT taps on the default Principled path.\n@group(0) @binding(9) var brdfLut: texture_2d<f32>;\n\n// \u2500\u2500\u2500 RGB \u2194 HSV \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn rgb_to_hsv(rgb: vec3f) -> vec3f {\n  let c_max = max(rgb.r, max(rgb.g, rgb.b));\n  let c_min = min(rgb.r, min(rgb.g, rgb.b));\n  let delta = c_max - c_min;\n\n  var h = 0.0;\n  if (delta > 1e-6) {\n    if (c_max == rgb.r) {\n      h = (rgb.g - rgb.b) / delta;\n      if (h < 0.0) { h += 6.0; }\n    } else if (c_max == rgb.g) {\n      h = 2.0 + (rgb.b - rgb.r) / delta;\n    } else {\n      h = 4.0 + (rgb.r - rgb.g) / delta;\n    }\n    h /= 6.0;\n  }\n  let s = select(0.0, delta / c_max, c_max > 1e-6);\n  return vec3f(h, s, c_max);\n}\n\nfn hsv_to_rgb(hsv: vec3f) -> vec3f {\n  let h = hsv.x;\n  let s = hsv.y;\n  let v = hsv.z;\n  if (s < 1e-6) { return vec3f(v); }\n\n  let hh = fract(h) * 6.0;\n  let sector = u32(hh);\n  let f = hh - f32(sector);\n  let p = v * (1.0 - s);\n  let q = v * (1.0 - s * f);\n  let t = v * (1.0 - s * (1.0 - f));\n\n  switch (sector) {\n    case 0u: { return vec3f(v, t, p); }\n    case 1u: { return vec3f(q, v, p); }\n    case 2u: { return vec3f(p, v, t); }\n    case 3u: { return vec3f(p, q, v); }\n    case 4u: { return vec3f(t, p, v); }\n    default: { return vec3f(v, p, q); }\n  }\n}\n\n// \u2500\u2500\u2500 HUE_SAT node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn hue_sat(hue: f32, saturation: f32, value: f32, fac: f32, color: vec3f) -> vec3f {\n  var hsv = rgb_to_hsv(color);\n  hsv.x = fract(hsv.x + hue - 0.5);\n  hsv.y = clamp(hsv.y * saturation, 0.0, 1.0);\n  hsv.z *= value;\n  return mix(color, hsv_to_rgb(hsv), fac);\n}\n\n// hue_sat specialization for hue=0.5 (identity hue shift \u2014 fract(h + 0.5 - 0.5) = h).\n// Branchless equivalent that skips the rgb_to_hsv \u2192 hsv_to_rgb roundtrip: WebKit's\n// Metal backend serializes the 3-way if chain in rgb_to_hsv and the 6-way switch in\n// hsv_to_rgb, where this form compiles to linear SIMD ops + a single select.\nfn hue_sat_id(saturation: f32, value: f32, fac: f32, color: vec3f) -> vec3f {\n  let m = max(max(color.r, color.g), color.b);\n  let n = min(min(color.r, color.g), color.b);\n  // Unclamped (sat*old_s \u2264 1): reproj = mix(vec3f(m), color, saturation).\n  // Clamped (saturated to 1):   reproj = (color - n) * m / (m - n).\n  let range = max(m - n, 1e-6);\n  let unclamped = mix(vec3f(m), color, saturation);\n  let clamped = (color - vec3f(n)) * m / range;\n  let needs_clamp = (m - n) * saturation >= m;\n  let reproj = select(unclamped, clamped, needs_clamp);\n  return mix(color, reproj * value, fac);\n}\n\n// \u2500\u2500\u2500 BRIGHTCONTRAST node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn bright_contrast(color: vec3f, bright: f32, contrast: f32) -> vec3f {\n  let a = 1.0 + contrast;\n  let b = bright - contrast * 0.5;\n  return max(vec3f(0.0), color * a + vec3f(b));\n}\n\n// \u2500\u2500\u2500 INVERT node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn invert(fac: f32, color: vec3f) -> vec3f {\n  return mix(color, vec3f(1.0) - color, fac);\n}\n\nfn invert_f(fac: f32, val: f32) -> f32 {\n  return mix(val, 1.0 - val, fac);\n}\n\n// \u2500\u2500\u2500 Color ramp (VALTORGB) \u2014 2-stop variants \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// All 7 presets use exclusively 2-stop ramps.\n\nfn ramp_constant(f: f32, p0: f32, c0: vec4f, p1: f32, c1: vec4f) -> vec4f {\n  return select(c0, c1, f >= p1);\n}\n\n// CONSTANT ramp with screen-space edge AA \u2014 kills sparkle where fwidth(f) straddles a hard step (NPR terminator)\nfn ramp_constant_edge_aa(f: f32, edge: f32, c0: vec4f, c1: vec4f) -> vec4f {\n  let w = max(fwidth(f) * 1.75, 6e-6);\n  let t = smoothstep(edge - w, edge + w, f);\n  return mix(c0, c1, t);\n}\n\nfn ramp_linear(f: f32, p0: f32, c0: vec4f, p1: f32, c1: vec4f) -> vec4f {\n  let t = saturate((f - p0) / max(p1 - p0, 1e-6));\n  return mix(c0, c1, t);\n}\n\n// LINEAR ramp, three stops. Both halves are evaluated and selected between rather\n// than branched on, so there is no divergence; saturate outside each span already\n// gives Blender's clamp-to-end-stop behaviour.\nfn ramp_linear3(f: f32, p0: f32, c0: vec4f, p1: f32, c1: vec4f, p2: f32, c2: vec4f) -> vec4f {\n  let lo = mix(c0, c1, saturate((f - p0) / max(p1 - p0, 1e-6)));\n  let hi = mix(c1, c2, saturate((f - p1) / max(p2 - p1, 1e-6)));\n  return select(lo, hi, f >= p1);\n}\n\nfn ramp_cardinal(f: f32, p0: f32, c0: vec4f, p1: f32, c1: vec4f) -> vec4f {\n  // cardinal spline with 2 stops degrades to smoothstep\n  let t = saturate((f - p0) / max(p1 - p0, 1e-6));\n  let ss = t * t * (3.0 - 2.0 * t);\n  return mix(c0, c1, ss);\n}\n\n// \u2500\u2500\u2500 MATH node operations \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\n// Transcribed from Blender 5.2's gpu_shader_common_math.glsl, including the\n// safe-guards \u2014 a Math node that divides by zero yields 0 there, not inf, and a\n// graph written against that behaviour relies on it.\nfn math_add(a: f32, b: f32) -> f32 { return a + b; }\nfn math_subtract(a: f32, b: f32) -> f32 { return a - b; }\nfn math_multiply(a: f32, b: f32) -> f32 { return a * b; }\nfn math_divide(a: f32, b: f32) -> f32 { return select(0.0, a / b, b != 0.0); }\nfn math_multiply_add(a: f32, b: f32, c: f32) -> f32 { return a * b + c; }\nfn math_power(a: f32, b: f32) -> f32 { return pow(max(a, 0.0), b); }\nfn math_logarithm(a: f32, b: f32) -> f32 { return select(0.0, log(a) / log(b), a > 0.0 && b > 0.0 && b != 1.0); }\nfn math_sqrt(a: f32) -> f32 { return sqrt(max(a, 0.0)); }\nfn math_inversesqrt(a: f32) -> f32 { return inverseSqrt(max(a, 1e-8)); }\nfn math_absolute(a: f32) -> f32 { return abs(a); }\nfn math_exponent(a: f32) -> f32 { return exp(a); }\nfn math_minimum(a: f32, b: f32) -> f32 { return min(a, b); }\nfn math_maximum(a: f32, b: f32) -> f32 { return max(a, b); }\nfn math_less_than(a: f32, b: f32) -> f32 { return select(0.0, 1.0, a < b); }\nfn math_greater_than(a: f32, b: f32) -> f32 { return select(0.0, 1.0, a > b); }\nfn math_sign(a: f32) -> f32 { return sign(a); }\n// The tolerance floors at 1e-5 in Blender, so a zero third input still compares.\nfn math_compare(a: f32, b: f32, c: f32) -> f32 { return select(0.0, 1.0, abs(a - b) <= max(c, 1e-5)); }\nfn math_smooth_min(a: f32, b: f32, c: f32) -> f32 {\n  if (c == 0.0) { return min(a, b); }\n  let h = max(c - abs(a - b), 0.0) / c;\n  return min(a, b) - h * h * h * c * (1.0 / 6.0);\n}\nfn math_smooth_max(a: f32, b: f32, c: f32) -> f32 { return -math_smooth_min(-a, -b, c); }\nfn math_round(a: f32) -> f32 { return floor(a + 0.5); }\nfn math_floor(a: f32) -> f32 { return floor(a); }\nfn math_ceil(a: f32) -> f32 { return ceil(a); }\nfn math_truncate(a: f32) -> f32 { return trunc(a); }\nfn math_fraction(a: f32) -> f32 { return a - floor(a); }\n// Blender's MODULO is fmod (truncated), not floorMod \u2014 the sign follows a.\nfn math_modulo(a: f32, b: f32) -> f32 { return select(0.0, a - b * trunc(a / b), b != 0.0); }\nfn math_floored_modulo(a: f32, b: f32) -> f32 { return select(0.0, a - floor(a / b) * b, b != 0.0); }\nfn math_snap(a: f32, b: f32) -> f32 { return floor(select(0.0, a / b, b != 0.0)) * b; }\nfn math_wrap(a: f32, b: f32, c: f32) -> f32 {\n  let range = b - c;\n  return select(c, a - range * floor((a - c) / range), range != 0.0);\n}\nfn math_pingpong(a: f32, b: f32) -> f32 {\n  return select(0.0, abs(fract((a - b) / (b * 2.0)) * b * 2.0 - b), b != 0.0);\n}\nfn math_sine(a: f32) -> f32 { return sin(a); }\nfn math_cosine(a: f32) -> f32 { return cos(a); }\nfn math_tangent(a: f32) -> f32 { return tan(a); }\nfn math_arcsine(a: f32) -> f32 { return asin(clamp(a, -1.0, 1.0)); }\nfn math_arccosine(a: f32) -> f32 { return acos(clamp(a, -1.0, 1.0)); }\nfn math_arctangent(a: f32) -> f32 { return atan(a); }\nfn math_arctan2(a: f32, b: f32) -> f32 { return atan2(a, b); }\nfn math_radians(a: f32) -> f32 { return radians(a); }\nfn math_degrees(a: f32) -> f32 { return degrees(a); }\n\n// \u2500\u2500\u2500 RGB Curves, as five samples \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\n/**\n * Blender's RGB Curves holds arbitrary control points, which cannot cross into a\n * shader as sockets. So the curve arrives SAMPLED: five values at t = 0, .25,\n * .5, .75, 1, and this rebuilds it with the same monotone (Fritsch-Carlson)\n * interpolation the Filmic LUT uses \u2014 C1 continuous, and it cannot overshoot,\n * which matters because a curve that overshoots turns a highlight roll-off into\n * a bright ring.\n *\n * Five points captures the levels-and-contrast adjustments these curves are\n * actually used for. A curve with more structure than that will not survive, and\n * should be a ramp instead.\n */\nfn curve_slope(d0: f32, d1: f32) -> f32 {\n  if (d0 * d1 <= 0.0) { return 0.0; }\n  let m = (d0 + d1) * 0.5;\n  return sign(d0) * min(abs(m), 2.0 * min(abs(d0), abs(d1)));\n}\nfn curve5(t0: f32, y0: f32, y1: f32, y2: f32, y3: f32, y4: f32) -> f32 {\n  let t = clamp(t0, 0.0, 1.0) * 4.0;\n  let i = min(floor(t), 3.0);\n  let f = t - i;\n  // A var, not a let: WGSL only allows a dynamic index on a REFERENCE, and a\n  // let-bound array is a value. Indexing it with a runtime k is a compile error \u2014\n  // and because this file is concatenated into every material shader, that error\n  // took every graph in the library down with it, not just curves.\n  var ys = array<f32, 5>(y0, y1, y2, y3, y4);\n  let k = i32(i);\n  let pa = ys[k];\n  let pb = ys[k + 1];\n  // Secants either side of each knot, clamped at the ends.\n  let dPrev = select(ys[max(k, 1)] - ys[max(k, 1) - 1], pb - pa, k == 0);\n  let dHere = pb - pa;\n  let dNext = select(ys[min(k + 2, 4)] - ys[min(k + 1, 3)], pb - pa, k == 3);\n  let m0 = curve_slope(dPrev, dHere);\n  let m1 = curve_slope(dHere, dNext);\n  let f2 = f * f;\n  let f3 = f2 * f;\n  return (2.0 * f3 - 3.0 * f2 + 1.0) * pa + (f3 - 2.0 * f2 + f) * m0 +\n         (-2.0 * f3 + 3.0 * f2) * pb + (f3 - f2) * m1;\n}\nfn rgb_curve(c: vec3f, y0: f32, y1: f32, y2: f32, y3: f32, y4: f32) -> vec3f {\n  return vec3f(\n    curve5(c.r, y0, y1, y2, y3, y4),\n    curve5(c.g, y0, y1, y2, y3, y4),\n    curve5(c.b, y0, y1, y2, y3, y4),\n  );\n}\n\n// \u2500\u2500\u2500 Normal Map / Vector Transform \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\n/**\n * Normal Map, with the tangent frame derived rather than read.\n *\n * Blender reads a per-vertex tangent; PMX files do not carry one, so there is\n * nothing to read. The frame is rebuilt per-pixel from screen-space derivatives\n * of position and UV \u2014 the standard substitute, exact on flat-ish shading and\n * off only where UVs are severely sheared. Cheaper than the alternative (running\n * a tangent-generation pass over every imported mesh) and invisible on the\n * character work this is for.\n */\nfn node_normal_map(color: vec3f, strength: f32, N: vec3f, worldPos: vec3f, uv: vec2f) -> vec3f {\n  let dp1 = dpdx(worldPos);\n  let dp2 = dpdy(worldPos);\n  let duv1 = dpdx(uv);\n  let duv2 = dpdy(uv);\n  let det = duv1.x * duv2.y - duv2.x * duv1.y;\n  if (abs(det) < 1e-12) { return N; }\n  let inv = 1.0 / det;\n  let T = safe_normal((dp1 * duv2.y - dp2 * duv1.y) * inv);\n  let B = safe_normal(cross(N, T));\n  // Tangent-space [0,1] \u2192 [-1,1], then into world.\n  let t = color * 2.0 - vec3f(1.0);\n  let mapped = safe_normal(T * t.x + B * t.y + N * t.z);\n  return safe_normal(mix(N, mapped, clamp(strength, 0.0, 1.0)));\n}\n\n/** Vector Transform, world \u2194 camera. Object space IS world here: a PMX model is\n *  placed by its own transform and shaded in world space, so there is no\n *  separate object frame to convert into. */\nfn vector_world_to_camera(v: vec3f) -> vec3f { return (camera.view * vec4f(v, 0.0)).xyz; }\nfn vector_camera_to_world(v: vec3f) -> vec3f { return (transpose(camera.view) * vec4f(v, 0.0)).xyz; }\nfn point_world_to_camera(p: vec3f) -> vec3f { return (camera.view * vec4f(p, 1.0)).xyz; }\n\n// \u2500\u2500\u2500 Style-group image maps (Image Texture on a non-PMX slot) \u2500\u2500\u2500\u2500\u2500\u2500\n// One function per slot because WGSL has no texture arrays-of-bindings here; the\n// slot is topology, exactly like a Math node's operation.\n\nfn group_tex0(uv: vec2f) -> vec4f { return textureSample(groupTexture0, diffuseSampler, uv); }\nfn group_tex1(uv: vec2f) -> vec4f { return textureSample(groupTexture1, diffuseSampler, uv); }\nfn group_tex2(uv: vec2f) -> vec4f { return textureSample(groupTexture2, diffuseSampler, uv); }\nfn group_tex3(uv: vec2f) -> vec4f { return textureSample(groupTexture3, diffuseSampler, uv); }\n\n// \u2500\u2500\u2500 VECTOR MATH node operations \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn vector_add(a: vec3f, b: vec3f) -> vec3f { return a + b; }\nfn vector_subtract(a: vec3f, b: vec3f) -> vec3f { return a - b; }\nfn vector_multiply(a: vec3f, b: vec3f) -> vec3f { return a * b; }\nfn vector_divide(a: vec3f, b: vec3f) -> vec3f {\n  return vec3f(math_divide(a.x, b.x), math_divide(a.y, b.y), math_divide(a.z, b.z));\n}\nfn vector_multiply_add(a: vec3f, b: vec3f, c: vec3f) -> vec3f { return a * b + c; }\nfn vector_cross(a: vec3f, b: vec3f) -> vec3f { return cross(a, b); }\nfn vector_project(a: vec3f, b: vec3f) -> vec3f {\n  let l = dot(b, b);\n  return select(vec3f(0.0), b * (dot(a, b) / l), l != 0.0);\n}\nfn vector_reflect(a: vec3f, b: vec3f) -> vec3f { return reflect(a, safe_normal(b)); }\nfn vector_refract(a: vec3f, b: vec3f, ior: f32) -> vec3f { return refract(a, safe_normal(b), ior); }\nfn vector_faceforward(a: vec3f, b: vec3f, c: vec3f) -> vec3f {\n  return select(a, -a, dot(b, c) < 0.0);\n}\nfn vector_dot(a: vec3f, b: vec3f) -> f32 { return dot(a, b); }\nfn vector_distance(a: vec3f, b: vec3f) -> f32 { return length(a - b); }\nfn vector_length(a: vec3f) -> f32 { return length(a); }\nfn vector_scale(a: vec3f, s: f32) -> vec3f { return a * s; }\n// Blender returns the zero vector rather than NaN for a degenerate input.\nfn vector_normalize(a: vec3f) -> vec3f {\n  let l = length(a);\n  return select(vec3f(0.0), a / l, l > 0.0);\n}\nfn vector_absolute(a: vec3f) -> vec3f { return abs(a); }\nfn vector_minimum(a: vec3f, b: vec3f) -> vec3f { return min(a, b); }\nfn vector_maximum(a: vec3f, b: vec3f) -> vec3f { return max(a, b); }\nfn vector_floor(a: vec3f) -> vec3f { return floor(a); }\nfn vector_ceil(a: vec3f) -> vec3f { return ceil(a); }\nfn vector_fraction(a: vec3f) -> vec3f { return a - floor(a); }\nfn vector_modulo(a: vec3f, b: vec3f) -> vec3f {\n  return vec3f(math_modulo(a.x, b.x), math_modulo(a.y, b.y), math_modulo(a.z, b.z));\n}\nfn vector_snap(a: vec3f, b: vec3f) -> vec3f {\n  return vec3f(math_snap(a.x, b.x), math_snap(a.y, b.y), math_snap(a.z, b.z));\n}\nfn vector_wrap(a: vec3f, b: vec3f, c: vec3f) -> vec3f {\n  return vec3f(math_wrap(a.x, b.x, c.x), math_wrap(a.y, b.y, c.y), math_wrap(a.z, b.z, c.z));\n}\n\n/** Vector Rotate, axis-angle form \u2014 Rodrigues about an arbitrary axis. */\nfn vector_rotate_axis(v: vec3f, center: vec3f, axis: vec3f, angle: f32) -> vec3f {\n  let n = safe_normal(axis);\n  let p = v - center;\n  let c = cos(angle);\n  return center + p * c + cross(n, p) * sin(angle) + n * dot(n, p) * (1.0 - c);\n}\nfn vector_rotate_euler(v: vec3f, center: vec3f, rot: vec3f) -> vec3f {\n  let p = v - center;\n  let cx = cos(rot.x); let sx = sin(rot.x);\n  let cy = cos(rot.y); let sy = sin(rot.y);\n  let cz = cos(rot.z); let sz = sin(rot.z);\n  // XYZ order, matching Blender's default euler.\n  let rx = vec3f(p.x, p.y * cx - p.z * sx, p.y * sx + p.z * cx);\n  let ry = vec3f(rx.x * cy + rx.z * sy, rx.y, -rx.x * sy + rx.z * cy);\n  return center + vec3f(ry.x * cz - ry.y * sz, ry.x * sz + ry.y * cz, ry.z);\n}\n\n// Blender's implicit Color \u2192 Float socket conversion uses BT.601 grayscale\n// (rgb_to_grayscale in blenkernel/intern/node.cc). When a material graph plugs a\n// Color output into a Math node's Value input, this is the scalar it actually sees.\nfn color_to_value(c: vec3f) -> f32 {\n  return 0.299 * c.r + 0.587 * c.g + 0.114 * c.b;\n}\n\n// \u2500\u2500\u2500 MIX node (blend_type variants) \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn mix_blend(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  return mix(a, b, fac);\n}\n\nfn mix_overlay(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  let lo = 2.0 * a * b;\n  let hi = vec3f(1.0) - 2.0 * (vec3f(1.0) - a) * (vec3f(1.0) - b);\n  let overlay = select(hi, lo, a < vec3f(0.5));\n  return mix(a, overlay, fac);\n}\n\nfn mix_multiply(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  return mix(a, a * b, fac);\n}\n\nfn mix_lighten(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  return mix(a, max(a, b), fac);\n}\n\n// Blender Mix (Color) blend LINEAR_LIGHT: result = mix(A, A + 2*B - 1, Fac)\nfn mix_linear_light(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  return mix(a, a + 2.0 * b - vec3f(1.0), fac);\n}\n\n// The rest of Blender's blend set, transcribed from\n// gpu_shader_material_mix_color.glsl. Note DODGE, BURN and DIVIDE are\n// per-channel with their own guards there, not vector expressions.\nfn mix_add(fac: f32, a: vec3f, b: vec3f) -> vec3f { return mix(a, a + b, fac); }\nfn mix_subtract(fac: f32, a: vec3f, b: vec3f) -> vec3f { return mix(a, a - b, fac); }\nfn mix_darken(fac: f32, a: vec3f, b: vec3f) -> vec3f { return mix(a, min(a, b), fac); }\nfn mix_difference(fac: f32, a: vec3f, b: vec3f) -> vec3f { return mix(a, abs(a - b), fac); }\nfn mix_exclusion(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  return max(mix(a, a + b - 2.0 * a * b, fac), vec3f(0.0));\n}\nfn mix_screen(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  let facm = 1.0 - fac;\n  return vec3f(1.0) - (vec3f(facm) + fac * (vec3f(1.0) - b)) * (vec3f(1.0) - a);\n}\nfn mix_soft_light(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  let facm = 1.0 - fac;\n  let scr = vec3f(1.0) - (vec3f(1.0) - b) * (vec3f(1.0) - a);\n  return facm * a + fac * ((vec3f(1.0) - a) * b * a + a * scr);\n}\nfn mix_dodge_1(fac: f32, a: f32, b: f32) -> f32 {\n  if (a == 0.0) { return 0.0; }\n  let t = 1.0 - fac * b;\n  if (t <= 0.0) { return 1.0; }\n  return min(a / t, 1.0);\n}\nfn mix_dodge(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  return vec3f(mix_dodge_1(fac, a.r, b.r), mix_dodge_1(fac, a.g, b.g), mix_dodge_1(fac, a.b, b.b));\n}\nfn mix_burn_1(fac: f32, a: f32, b: f32) -> f32 {\n  let facm = 1.0 - fac;\n  let t = facm + fac * b;\n  if (t <= 0.0) { return 0.0; }\n  return clamp(1.0 - (1.0 - a) / t, 0.0, 1.0);\n}\nfn mix_burn(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  return vec3f(mix_burn_1(fac, a.r, b.r), mix_burn_1(fac, a.g, b.g), mix_burn_1(fac, a.b, b.b));\n}\nfn mix_divide_1(fac: f32, a: f32, b: f32) -> f32 {\n  return select(a, (1.0 - fac) * a + fac * a / b, b != 0.0);\n}\nfn mix_divide(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  return vec3f(mix_divide_1(fac, a.r, b.r), mix_divide_1(fac, a.g, b.g), mix_divide_1(fac, a.b, b.b));\n}\n// The HSV-routed blends: take one channel from B, the rest from A.\nfn mix_hue(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  let hsvB = rgb_to_hsv(b);\n  if (hsvB.y == 0.0) { return a; }\n  var hsv = rgb_to_hsv(a);\n  hsv.x = hsvB.x;\n  return mix(a, hsv_to_rgb(hsv), fac);\n}\nfn mix_saturation(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  var hsv = rgb_to_hsv(a);\n  if (hsv.y == 0.0) { return a; }\n  hsv.y = mix(hsv.y, rgb_to_hsv(b).y, fac);\n  return hsv_to_rgb(hsv);\n}\nfn mix_color_blend(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  let hsvB = rgb_to_hsv(b);\n  if (hsvB.y == 0.0) { return a; }\n  var hsv = rgb_to_hsv(a);\n  hsv.x = hsvB.x;\n  hsv.y = hsvB.y;\n  return mix(a, hsv_to_rgb(hsv), fac);\n}\nfn mix_value(fac: f32, a: vec3f, b: vec3f) -> vec3f {\n  var hsv = rgb_to_hsv(a);\n  hsv.z = mix(hsv.z, rgb_to_hsv(b).z, fac);\n  return hsv_to_rgb(hsv);\n}\n\n// \u2500\u2500\u2500 Colour utility nodes \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\n/** Gamma node \u2014 Blender guards the zero case rather than emitting NaN. */\nfn node_gamma(c: vec3f, g: f32) -> vec3f {\n  return vec3f(\n    select(0.0, pow(c.r, g), c.r > 0.0),\n    select(0.0, pow(c.g, g), c.g > 0.0),\n    select(0.0, pow(c.b, g), c.b > 0.0),\n  );\n}\n\n/** Map Range, linear, with the clamp Blender applies when the toggle is on. */\nfn map_range_linear(v: f32, fromMin: f32, fromMax: f32, toMin: f32, toMax: f32) -> f32 {\n  let d = fromMax - fromMin;\n  return select(0.0, toMin + ((v - fromMin) / d) * (toMax - toMin), d != 0.0);\n}\nfn map_range_clamped(v: f32, fromMin: f32, fromMax: f32, toMin: f32, toMax: f32) -> f32 {\n  let r = map_range_linear(v, fromMin, fromMax, toMin, toMax);\n  return clamp(r, min(toMin, toMax), max(toMin, toMax));\n}\n/** Map Range, smoothstep interpolation. */\nfn map_range_smooth(v: f32, fromMin: f32, fromMax: f32, toMin: f32, toMax: f32) -> f32 {\n  let d = fromMax - fromMin;\n  if (d == 0.0) { return 0.0; }\n  let t = clamp((v - fromMin) / d, 0.0, 1.0);\n  return toMin + (t * t * (3.0 - 2.0 * t)) * (toMax - toMin);\n}\n\n/** RGB\u2192HSL and back, for Separate/Combine Color's HSL mode. */\nfn rgb_to_hsl(c: vec3f) -> vec3f {\n  let mx = max(c.r, max(c.g, c.b));\n  let mn = min(c.r, min(c.g, c.b));\n  let l = (mx + mn) * 0.5;\n  if (mx == mn) { return vec3f(0.0, 0.0, l); }\n  let d = mx - mn;\n  let s = select(d / (2.0 - mx - mn), d / (mx + mn), l <= 0.5);\n  var h: f32;\n  if (mx == c.r) { h = (c.g - c.b) / d + select(0.0, 6.0, c.g < c.b); }\n  else if (mx == c.g) { h = (c.b - c.r) / d + 2.0; }\n  else { h = (c.r - c.g) / d + 4.0; }\n  return vec3f(h / 6.0, s, l);\n}\nfn hsl_channel(p: f32, q: f32, t0: f32) -> f32 {\n  var t = fract(t0);\n  if (t < 1.0 / 6.0) { return p + (q - p) * 6.0 * t; }\n  if (t < 0.5) { return q; }\n  if (t < 2.0 / 3.0) { return p + (q - p) * (2.0 / 3.0 - t) * 6.0; }\n  return p;\n}\nfn hsl_to_rgb(hsl: vec3f) -> vec3f {\n  if (hsl.y == 0.0) { return vec3f(hsl.z); }\n  let q = select(hsl.z + hsl.y - hsl.z * hsl.y, hsl.z * (1.0 + hsl.y), hsl.z < 0.5);\n  let p = 2.0 * hsl.z - q;\n  return vec3f(\n    hsl_channel(p, q, hsl.x + 1.0 / 3.0),\n    hsl_channel(p, q, hsl.x),\n    hsl_channel(p, q, hsl.x - 1.0 / 3.0),\n  );\n}\n\n// Luminance for Shader\u2192RGB scalar gates (linear RGB, Rec.709 weights)\nfn luminance_rec709_linear(c: vec3f) -> f32 {\n  return dot(max(c, vec3f(0.0)), vec3f(0.2126, 0.7152, 0.0722));\n}\n\n// \u2500\u2500\u2500 FRESNEL node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Schlick approximation matching Blender's Fresnel node\n\nfn fresnel(ior: f32, n: vec3f, v: vec3f) -> f32 {\n  let r = (ior - 1.0) / (ior + 1.0);\n  let f0 = r * r;\n  let cos_theta = clamp(dot(n, v), 0.0, 1.0);\n  let m = 1.0 - cos_theta;\n  let m2 = m * m;\n  let m5 = m2 * m2 * m;\n  return f0 + (1.0 - f0) * m5;\n}\n\n// \u2500\u2500\u2500 LAYER_WEIGHT node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn layer_weight_fresnel(blend: f32, n: vec3f, v: vec3f) -> f32 {\n  let eta = max(1.0 - blend, 1e-4);\n  let r = (1.0 - eta) / (1.0 + eta);\n  let f0 = r * r;\n  let cos_theta = clamp(abs(dot(n, v)), 0.0, 1.0);\n  let m = 1.0 - cos_theta;\n  let m2 = m * m;\n  let m5 = m2 * m2 * m;\n  return f0 + (1.0 - f0) * m5;\n}\n\nfn layer_weight_facing(blend: f32, n: vec3f, v: vec3f) -> f32 {\n  var facing = abs(dot(n, v));\n  let b = clamp(blend, 0.0, 0.99999);\n  if (b != 0.5) {\n    let exponent = select(2.0 * b, 0.5 / (1.0 - b), b >= 0.5);\n    facing = pow(facing, exponent);\n  }\n  return 1.0 - facing;\n}\n\n// \u2500\u2500\u2500 SHADER_TO_RGB (white DiffuseBSDF) \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Eevee captures lit diffuse: (albedo/\u03C0)*sun*N\u00B7L*shadow + ambient (linear). Albedo=1.\n// Matches default.ts direct term scale so VALTORGB thresholds from Blender JSON stay valid.\n\n/**\n * Shader \u2192 RGB on a white diffuse closure, as a COLOUR.\n *\n * Blender's ShaderToRGB hands back what the closure actually radiates, and that\n * is coloured: a warm sun against a cool ambient gives warm light and cool\n * shadow, which is most of what an NPR ramp is reading. Collapsing it to\n * luminance first \u2014 which this used to do \u2014 throws that away and leaves every\n * ramp working on grey.\n *\n * Feeding this into a scalar socket still yields a float, because Blender's own\n * implicit Color \u2192 Value conversion (BT.601, see color_to_value) does it at the\n * link. So a graph that wants the scalar gets Blender's scalar, and one that\n * wants the colour now gets that too.\n *\n * The maths matches 5.2's bxdf_diffuse_eval, which is saturate(dot(N,L))\n * integrated against a cosine distribution: radiance = E\u00B7N\u00B7L/\u03C0 for the sun, plus\n * the world's own irradiance. EEVEE Next's extra transport \u2014 probe GI, virtual\n * shadow maps, ray-traced bounce \u2014 is machinery rather than a term, and is not\n * here.\n */\nfn shader_to_rgb_lit(n: vec3f, l: vec3f, sun_rgb: vec3f, ambient_rgb: vec3f, shadow: f32) -> vec3f {\n  const PI_S: f32 = 3.141592653589793;\n  let ndotl = max(dot(n, l), 0.0);\n  return sun_rgb * (ndotl * shadow / PI_S) + ambient_rgb;\n}\n\nfn shader_to_rgb_diffuse(n: vec3f, l: vec3f, sun_rgb: vec3f, ambient_rgb: vec3f, shadow: f32) -> f32 {\n  return luminance_rec709_linear(shader_to_rgb_lit(n, l, sun_rgb, ambient_rgb, shadow));\n}\n\n// \u2500\u2500\u2500 BUMP node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Screen-space bump from a scalar height field. Needs dFdx/dFdy which\n// WGSL provides as dpdx/dpdy.\n\nfn bump(strength: f32, height: f32, normal: vec3f, world_pos: vec3f) -> vec3f {\n  let dhdx = dpdx(height);\n  let dhdy = dpdy(height);\n  let dpdx_pos = dpdx(world_pos);\n  let dpdy_pos = dpdy(world_pos);\n  let perturbed = normalize(normal) - strength * (dhdx * normalize(cross(dpdy_pos, normal)) + dhdy * normalize(cross(normal, dpdx_pos)));\n  return normalize(perturbed);\n}\n\n// LH engine + WebGPU fragment Y: flip dhdy contribution so height peaks read as outward bumps vs Blender reference\nfn bump_lh(strength: f32, height: f32, normal: vec3f, world_pos: vec3f) -> vec3f {\n  let dhdx = dpdx(height);\n  let dhdy = dpdy(height);\n  let dpdx_pos = dpdx(world_pos);\n  let dpdy_pos = dpdy(world_pos);\n  let perturbed = normalize(normal) - strength * (dhdx * normalize(cross(dpdy_pos, normal)) - dhdy * normalize(cross(normal, dpdx_pos)));\n  return normalize(perturbed);\n}\n\n// \u2500\u2500\u2500 NOISE texture (Perlin-style) \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Simplified gradient noise matching Blender's default noise output.\n\n// PCG-style integer hash. Replaces the classic 'fract(sin(q) * LARGE)' trick because\n// WebKit's Metal backend compiles 'sin' to a full transcendental op (slow), while\n// Safari's Apple-GPU scalar ALU handles int muls/xors near free. Inputs arrive as\n// integer-valued floats (floor(p) + unit offsets) from _noise3, so vec3i cast is exact.\nfn _hash33(p: vec3f) -> vec3f {\n  var h = vec3u(vec3i(p) + vec3i(32768));\n  h = h * vec3u(1664525u, 1013904223u, 2654435761u);\n  h = (h.yzx ^ h) * vec3u(2246822519u, 3266489917u, 668265263u);\n  h = h ^ (h >> vec3u(16u));\n  // Mask to 24 bits \u2014 above that f32 loses precision on the u32\u2192f32 convert.\n  let hm = h & vec3u(16777215u);\n  return vec3f(hm) * (2.0 / 16777216.0) - 1.0;\n}\n\nfn _noise3(p: vec3f) -> f32 {\n  let i = floor(p);\n  let f = fract(p);\n  let u = f * f * (3.0 - 2.0 * f);\n\n  return mix(\n    mix(\n      mix(dot(_hash33(i + vec3f(0,0,0)), f - vec3f(0,0,0)),\n          dot(_hash33(i + vec3f(1,0,0)), f - vec3f(1,0,0)), u.x),\n      mix(dot(_hash33(i + vec3f(0,1,0)), f - vec3f(0,1,0)),\n          dot(_hash33(i + vec3f(1,1,0)), f - vec3f(1,1,0)), u.x), u.y),\n    mix(\n      mix(dot(_hash33(i + vec3f(0,0,1)), f - vec3f(0,0,1)),\n          dot(_hash33(i + vec3f(1,0,1)), f - vec3f(1,0,1)), u.x),\n      mix(dot(_hash33(i + vec3f(0,1,1)), f - vec3f(0,1,1)),\n          dot(_hash33(i + vec3f(1,1,1)), f - vec3f(1,1,1)), u.x), u.y),\n    u.z);\n}\n\nfn tex_noise(p: vec3f, scale: f32, detail: f32, roughness: f32, distortion: f32) -> f32 {\n  var q = p;\n  if (abs(distortion) > 1e-6) {\n    let w = _noise3(p * scale * 1.37 + vec3f(2.31, 5.17, 8.09));\n    q = p + (w * 2.0 - 1.0) * distortion;\n  }\n  let coords = q * scale;\n  var value = 0.0;\n  var amplitude = 1.0;\n  var frequency = 1.0;\n  var total_amp = 0.0;\n  let octaves = i32(clamp(detail, 0.0, 15.0)) + 1;\n  for (var i = 0; i < octaves; i++) {\n    value += amplitude * _noise3(coords * frequency);\n    total_amp += amplitude;\n    amplitude *= roughness;\n    frequency *= 2.0;\n  }\n  return value / max(total_amp, 1e-6) * 0.5 + 0.5;\n}\n\n// tex_noise specialization: detail=2.0 (3 octaves), roughness=0.5, distortion=0.\n// WebKit can't unroll tex_noise's for-loop because 'octaves' is a runtime value;\n// this variant is fully unrolled with constants folded (total_amp = 1.75).\nfn tex_noise_d2(p: vec3f, scale: f32) -> f32 {\n  let c = p * scale;\n  let v = _noise3(c) + 0.5 * _noise3(c * 2.0) + 0.25 * _noise3(c * 4.0);\n  return v * (1.0 / 1.75) * 0.5 + 0.5;\n}\n\n// \u2500\u2500\u2500 TEX_GRADIENT (linear) \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Used by Stockings preset. Maps the input vector's X to a 0\u20131 gradient.\n\nfn tex_gradient_linear(uv: vec3f) -> f32 {\n  return clamp(uv.x, 0.0, 1.0);\n}\n\n// \u2500\u2500\u2500 TEX_VORONOI \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// 3D F1 voronoi. _f1 returns Distance; _color returns per-cell hash color\n// (matches Blender voronoi.cc: outColor = hash_int3_to_float3(cell + targetOffset)).\n\nfn tex_voronoi_f1(p: vec3f, scale: f32) -> f32 {\n  let coords = p * scale;\n  let i = floor(coords);\n  let f = fract(coords);\n  var min_dist = 1e10;\n  for (var z = -1; z <= 1; z++) {\n    for (var y = -1; y <= 1; y++) {\n      for (var x = -1; x <= 1; x++) {\n        let neighbor = vec3f(f32(x), f32(y), f32(z));\n        let point = _hash33(i + neighbor) * 0.5 + 0.5;\n        let diff = neighbor + point - f;\n        min_dist = min(min_dist, dot(diff, diff));\n      }\n    }\n  }\n  return sqrt(min_dist);\n}\n\n// The per-cell jitter hash IS the Color output in Blender \u2014 reuse the same hash\n// tap for jitter + color instead of computing two.\nfn tex_voronoi_color(p: vec3f, scale: f32) -> vec3f {\n  let coords = p * scale;\n  let i = floor(coords);\n  let f = fract(coords);\n  var min_dist = 1e10;\n  var min_hash = vec3f(0.5);\n  for (var z = -1; z <= 1; z++) {\n    for (var y = -1; y <= 1; y++) {\n      for (var x = -1; x <= 1; x++) {\n        let neighbor = vec3f(f32(x), f32(y), f32(z));\n        let h = _hash33(i + neighbor) * 0.5 + 0.5;\n        let diff = neighbor + h - f;\n        let d = dot(diff, diff);\n        if (d < min_dist) {\n          min_dist = d;\n          min_hash = h;\n        }\n      }\n    }\n  }\n  return min_hash;\n}\n\n// \u2500\u2500\u2500 SEPXYZ node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn separate_xyz(v: vec3f) -> vec3f { return v; }\n\n// \u2500\u2500\u2500 VECT_MATH (cross product) \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n\nfn vect_math_cross(a: vec3f, b: vec3f) -> vec3f { return cross(a, b); }\n\n// \u2500\u2500\u2500 MAPPING node \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Point-type mapping: scale, rotate (euler XYZ), translate.\n\nfn mapping_point(v: vec3f, loc: vec3f, rot: vec3f, scl: vec3f) -> vec3f {\n  var p = v * scl;\n  // simplified: skip rotation when all angles are zero (common case)\n  if (abs(rot.x) + abs(rot.y) + abs(rot.z) > 1e-6) {\n    let cx = cos(rot.x); let sx = sin(rot.x);\n    let cy = cos(rot.y); let sy = sin(rot.y);\n    let cz = cos(rot.z); let sz = sin(rot.z);\n    let rx = vec3f(p.x, cx*p.y - sx*p.z, sx*p.y + cx*p.z);\n    let ry = vec3f(cy*rx.x + sy*rx.z, rx.y, -sy*rx.x + cy*rx.z);\n    p = vec3f(cz*ry.x - sz*ry.y, sz*ry.x + cz*ry.y, ry.z);\n  }\n  return p + loc;\n}\n\n// \u2500\u2500\u2500 NORMAL_MAP node (tangent-space) \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Applies a tangent-space normal map. Requires TBN from vertex stage.\n\nfn normal_map(strength: f32, map_color: vec3f, normal: vec3f, tangent: vec3f, bitangent: vec3f) -> vec3f {\n  let ts = map_color * 2.0 - 1.0;\n  let perturbed = normalize(tangent * ts.x + bitangent * ts.y + normal * ts.z);\n  return normalize(mix(normal, perturbed, strength));\n}\n\n// \u2500\u2500\u2500 EEVEE Principled BSDF primitives \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Ports from Blender 3.6 source/blender/draw/engines/eevee/shaders/\n//   bsdf_common_lib.glsl + gpu_shader_material_principled.glsl.\n// Usage pattern (see material shaders): direct spec = bsdf_ggx \u00D7 sun \u00D7 shadow\n// (NL baked in, no F yet); ambient spec = probe_radiance; tint both with\n// reflection_color = F_brdf_multi_scatter(f0, f90, split_sum) AFTER summing.\n\nconst EEVEE_PI: f32 = 3.141592653589793;\n\n// Fused analytic GGX specular (direct lights). Returns BRDF \u00D7 NL.\n// 4\u00B7NL\u00B7NV is cancelled via G1_Smith reciprocal form \u2014 see bsdf_common_lib.glsl:115.\n// Caller passes NL, NV (already computed for diffuse + brdf_lut_sample) so WebKit\n// can reuse them instead of recomputing dot products across the function boundary.\nfn bsdf_ggx(N: vec3f, L: vec3f, V: vec3f, NL_in: f32, NV_in: f32, roughness: f32) -> f32 {\n  let a = max(roughness, 1e-4);\n  let a2 = a * a;\n  let H = normalize(L + V);\n  let NH = max(dot(N, H), 1e-8);\n  let NL = max(NL_in, 1e-8);\n  let NV = max(NV_in, 1e-8);\n  // G1_Smith_GGX_opti reciprocal form \u2014 denominator piece only.\n  let G1L = NL + sqrt(NL * (NL - NL * a2) + a2);\n  let G1V = NV + sqrt(NV * (NV - NV * a2) + a2);\n  let G = G1L * G1V;\n  // D_ggx_opti = pi * denom\u00B2 \u2014 reciprocal D \u00D7 a\u00B2.\n  let tmp = (NH * a2 - NH) * NH + 1.0;\n  let D_opti = EEVEE_PI * tmp * tmp;\n  return NL * a2 / (D_opti * G);\n}\n\n// Split-sum DFG LUT \u2014 Karis 2013 curve fit stand-in for the 64\u00D764 baked LUT.\n// Returns (lut.x, lut.y) in Blender convention: tint = f0\u00B7lut.x + f90\u00B7lut.y.\nfn brdf_lut_approx(NV: f32, roughness: f32) -> vec2f {\n  let c0 = vec4f(-1.0, -0.0275, -0.572, 0.022);\n  let c1 = vec4f(1.0, 0.0425, 1.04, -0.04);\n  let r = roughness * c0 + c1;\n  let a004 = min(r.x * r.x, exp2(-9.28 * NV)) * r.x + r.y;\n  return vec2f(-1.04, 1.04) * a004 + r.zw;\n}\n\n// Baked combined BRDF LUT \u2014 exact port of Blender bsdf_lut_frag.glsl packed with\n// ltc_mag_ggx from eevee_lut.c. Single sample returns DFG (.rg) and LTC mag (.ba).\n// Addressed as Blender's common_utiltex_lib.glsl:lut_coords:\n//   coords = (roughness, sqrt(1 - NV)), then half-texel bias for filtering.\n// Requires group(0) binding(9) brdfLut + binding(2) diffuseSampler in the host shader.\nfn brdf_lut_sample(NV: f32, roughness: f32) -> vec4f {\n  let LUT_SIZE: f32 = 64.0;\n  var uv = vec2f(saturate(roughness), sqrt(saturate(1.0 - NV)));\n  uv = uv * ((LUT_SIZE - 1.0) / LUT_SIZE) + 0.5 / LUT_SIZE;\n  return textureSampleLevel(brdfLut, diffuseSampler, uv, 0.0);\n}\n\nfn F_brdf_single_scatter(f0: vec3f, f90: vec3f, lut: vec2f) -> vec3f {\n  return lut.y * f90 + lut.x * f0;\n}\n\n// Fdez-Ag\u00FCera 2019 multi-scatter compensation (EEVEE do_multiscatter=1).\nfn F_brdf_multi_scatter(f0: vec3f, f90: vec3f, lut: vec2f) -> vec3f {\n  let FssEss = lut.y * f90 + lut.x * f0;\n  let Ess = lut.x + lut.y;\n  let Ems = 1.0 - Ess;\n  let Favg = f0 + (1.0 - f0) / 21.0;\n  let Fms = FssEss * Favg / (1.0 - (1.0 - Ess) * Favg);\n  return FssEss + Fms * Ems;\n}\n\n// EEVEE direct-specular energy compensation factor \u2014 closure_eval_glossy_lib.glsl:79-81:\n//   ltc_brdf_scale = (ltc.x + ltc.y) / (split_sum.x + split_sum.y)\n// Blender evaluates direct lights via LTC (Heitz 2016) but indirect via split-sum;\n// direct radiance is rescaled so total-energy matches the split-sum LUT.\n// Takes a pre-sampled vec4f from brdf_lut_sample() to share the fetch with\n// F_brdf_multi_scatter on the same fragment.\nfn ltc_brdf_scale_from_lut(lut: vec4f) -> f32 {\n  return (lut.z + lut.w) / max(lut.x + lut.y, 1e-6);\n}\n\n// Luminance-normalized hue extraction \u2014 Blender tint_from_color (isolates hue+sat).\nfn tint_from_color(color: vec3f) -> vec3f {\n  let lum = dot(color, vec3f(0.3, 0.6, 0.1));\n  return select(vec3f(1.0), color / lum, lum > 0.0);\n}\n\n// \u2500\u2500\u2500 Principled sheen (gpu_shader_material_principled.glsl:8-14) \u2500\u2500\u2500\u2500\n// Empirical NV-only curve that approximates grazing retroreflection on cloth/velvet.\n// Scales the sheen layer's diffuse contribution; no sheen call site has sheen=0\n// shortcut because the multiplier is tiny at normal view angles anyway.\nfn principled_sheen(NV: f32) -> f32 {\n  let f = 1.0 - NV;\n  return f * f * f * 0.077 + f * 0.01 + 0.00026;\n}\n\n// \u2500\u2500\u2500 Principled BSDF eval \u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\u2500\n// Shared EEVEE Principled path used by every material in the engine \u2014 metallic,\n// dielectric, and sheen variants all fold into these ~15 lines via the struct\n// fields. NPR materials still compute a separate toon/rim/warm stack on top and\n// mix(npr_stack, eval_principled(...), fac); see body.ts / face.ts / etc.\n//\n// Field conventions:\n//   base           \u2014 diffuse albedo. Mixed into f0 only when metallic > 0.\n//   metallic       \u2014 0 = dielectric (f0 from specular), 1 = pure metal (f0 = base).\n//   specular       \u2014 Principled Specular input (0.5 default \u2192 f0 = 0.04). sqrt for f90.\n//   roughness      \u2014 GGX roughness; drives BRDF LUT coord + bsdf_ggx.\n//   spec_clamp     \u2014 EEVEE Light Clamp equivalent. Caps firefly spec from noise-bumped\n//                    NDF aliasing (Blender hides this via TAA which we don't have).\n//                    Pass 1e30 (effectively disabled) for materials that don't bump.\n//   sheen          \u2014 0 disables. Scales the sheen diffuse add; cloth/stockings use ~0.7.\n//   sheen_tint     \u2014 0 = white sheen, 1 = fully tinted by base. Multiplied by sheen,\n//                    so value is don't-care when sheen=0.\n// The PMX sphere map, applied the way MMD applies it: the texture is a\n// VIEW-SPACE lighting mask, sampled by the camera-space normal rather than by\n// any UV the mesh carries, which is why it tracks the viewer and reads as a\n// highlight. The material's own mode picks the operator \u2014 .sph (1) multiplies\n// the shaded base, .spa (2) adds \u2014 so a graph asks for the effect and the model\n// decides which it meant. Mode 0, or a material with no sphere texture (the 1\u00D71\n// white fallback is bound then), is an exact no-op.\nfn pmx_sphere_map(base: vec3f, strength: f32, N: vec3f) -> vec3f {\n  if (material.sphereMode < 0.5) {\n    return base;\n  }\n  let camera_n = safe_normal((camera.view * vec4f(N, 0.0)).xyz);\n  let sphere_uv = clamp(camera_n.xy * 0.5 + vec2f(0.5), vec2f(0.0), vec2f(1.0));\n  let sphere_rgb = textureSample(sphereTexture, diffuseSampler, sphere_uv).rgb;\n  let amount = max(strength, 0.0);\n  if (material.sphereMode < 1.5) {\n    return mix(base, base * sphere_rgb, min(amount, 1.0));\n  }\n  return base + sphere_rgb * amount;\n}\n\n/**\n * Principled v2 reflectance: IOR sets it, the level scales it.\n *\n * Blender 3.6 took Specular directly, where 0.5 meant f0 = 0.04. v2 computes\n * f0 from IOR \u2014 ((ior-1)/(ior+1))\u00B2 \u2014 and Specular IOR Level scales that, with\n * 0.5 meaning \"the IOR's own value\". Returned in the 3.6 convention the BSDF\n * below still speaks (f0 = 0.08 \u00B7 specular), so the two agree at their defaults\n * and v2 wins whenever a preset moves either socket.\n */\nfn principled_specular(ior: f32, level: f32) -> f32 {\n  let r = (ior - 1.0) / max(ior + 1.0, 1e-6);\n  return (r * r * 2.0 * max(level, 0.0)) / 0.08;\n}\n\nstruct PrincipledIn {\n  base: vec3f,\n  metallic: f32,\n  specular: f32,\n  roughness: f32,\n  spec_clamp: f32,\n  sheen: f32,\n  sheen_tint: f32,\n};\n\nfn eval_principled(\n  p: PrincipledIn,\n  N: vec3f, L: vec3f, V: vec3f,\n  sun_rgb: vec3f, amb_rgb: vec3f, shadow: f32\n) -> vec3f {\n  let NL = max(dot(N, L), 0.0);\n  let NV = max(dot(N, V), 1e-4);\n\n  // f0/f90 per gpu_shader_material_principled.glsl. specular_tint=0 is assumed\n  // (all presets in this engine use the default white dielectric tint).\n  let dielectric_f0 = vec3f(0.08 * p.specular);\n  let f0 = mix(dielectric_f0, p.base, p.metallic);\n  let f90 = mix(f0, vec3f(1.0), sqrt(p.specular));\n\n  // Single LUT tap feeds both F_brdf_multi_scatter (split-sum DFG) and\n  // ltc_brdf_scale_from_lut (LTC mag in .ba). See nodes.ts brdf_lut_sample.\n  let lut = brdf_lut_sample(NV, p.roughness);\n  let reflection_color = F_brdf_multi_scatter(f0, f90, lut.xy);\n\n  // Direct glossy \u2014 bsdf_ggx already includes NL; no F applied here (tinted after\n  // accum with reflection_color). ltc_brdf_scale rescales direct to match the\n  // split-sum indirect path, matching EEVEE closure_eval_glossy_lib behavior.\n  let spec_direct_raw = bsdf_ggx(N, L, V, NL, NV, p.roughness)\n                       * sun_rgb * shadow * ltc_brdf_scale_from_lut(lut);\n  let spec_direct = min(spec_direct_raw, vec3f(p.spec_clamp));\n  let spec_indirect = amb_rgb;\n  let spec_radiance = (spec_direct + spec_indirect) * reflection_color;\n\n  // Sheen add \u2014 when p.sheen=0 the whole term collapses, leaving diffuse_color=base.\n  let base_tint = tint_from_color(p.base);\n  let sheen_color = mix(vec3f(1.0), base_tint, p.sheen_tint);\n  let diffuse_color = p.base + p.sheen * sheen_color * principled_sheen(NV);\n\n  // diffuse_weight = (1-metallic). Indirect diffuse uses amb (L_w) with no \u03C0 factor\n  // (probe_evaluate_world_diff returns SH-projected radiance, not cosine-convolved).\n  let diffuse_weight = 1.0 - p.metallic;\n  let diffuse_radiance = diffuse_color * (sun_rgb * NL * shadow / EEVEE_PI + amb_rgb) * diffuse_weight;\n\n  return diffuse_radiance + spec_radiance;\n}\n\n";
 //# sourceMappingURL=nodes.d.ts.map

package/dist/shaders/materials/nodes.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"nodes.d.ts","sourceRoot":"","sources":["../../../src/shaders/materials/nodes.ts"],"names":[],"mappings":"AAIA,eAAO,MAAM,UAAU,so3BAgkBtB,CAAC"}
+{"version":3,"file":"nodes.d.ts","sourceRoot":"","sources":["../../../src/shaders/materials/nodes.ts"],"names":[],"mappings":"AAIA,eAAO,MAAM,UAAU,kj8CA67BtB,CAAC"}