react-native-zeroconf 0.15.2 → 0.16.1

package/android/src/main/jni/mdnsresponder/mDNSPosix/nss_mdns.conf

@@ -1,13 +0,0 @@
-# Defaut configuration file for nss_mdns
-
-# Applicable domains
-domain local
-domain 254.169.in-addr.arpa
-domain 8.e.f.ip6.int
-domain 9.e.f.ip6.int
-domain a.e.f.ip6.int
-domain b.e.f.ip6.int
-domain 8.e.f.ip6.arpa
-domain 9.e.f.ip6.arpa
-domain a.e.f.ip6.arpa
-domain b.e.f.ip6.arpa

package/android/src/main/jni/mdnsresponder/mDNSPosix/nss_mdns.conf.5

@@ -1,135 +0,0 @@
-.\"
-.\" See section LICENSE for license information.
-.\"
-.Dd June 15, 2004
-.Dt NSS_MDNS.CONF 5
-.Os
-.Sh NAME
-.Nm nss_mdns.conf
-.Nd configuration file for
-.Xr libnss_mdns 8 .
-.Sh DESCRIPTION
-This file describes the domains that
-.Xr libnss_mdns 8
-is to support.  If a lookup domain is not in this list, then
-.Li NSS_STATUS_NOTFOUND
-will be returned to libc and processing will continue according to
-.Xr nsswitch.conf 5 .
-.Ss Configuration file format
-Lines containing only whitespace or lines whose first non-whitespace character is
-.Ql #
-are ignored.  No single line may be greater than 1023 characters plus end-of-line.
-.Pp
-.D1 Ic domain Ar x.y.z
-.Pp
-Enable use of
-.Xr libnss_mdns 8
-to lookup DNS entries in the
-.Ql x.y.z
-domain.  Leading and trailing dots are dropped.
-.Pp
-Reverse (PTR) lookups are enabled using their DNS names.  IPv6 names use
-.Qq nibble format .
-.Pp
-.Dl domain 254.169.in-addr.arpa
-.Dl domain 0.8.e.f.ip6.arpa
-.Ss Default configuration
-If the configuration file cannot be found then the following is assumed.
-.Bd -literal -offset indent
-domain local
-domain 0.8.e.f.ip6.int
-domain 0.8.e.f.ip6.arpa
-domain 254.169.in-addr.arpa
-.Ed
-.Sh SEE ALSO
-.\" Cross-references should be ordered by section (low to high), then in
-.\"     alphabetical order.
-.Xr nsswitch.conf 5 ,
-.Xr libnss_mdns 8
-.\" .Sh STANDARDS
-.Sh HISTORY
-.Xr libnss_mdns 8
-was originally written for
-.An NICTA Bq http://www.nicta.com.au/ .
-.Sh AUTHORS
-.An "Andrew White" Bq Andrew.White@nicta.com.au
-.Sh LICENSE
-This software is licensed under the NICTA Public Source License version 1.0
-.Ss NICTA Public Software Licence
-Version 1.0
-.Pp
-Copyright 2004 National ICT Australia Ltd
-.Pp
-All rights reserved.
-.Pp
-By this licence, National ICT Australia Ltd (NICTA) grants permission,
-free of charge, to any person who obtains a copy of this software
-and any associated documentation files ("the Software") to use and
-deal with the Software in source code and binary forms without
-restriction, with or without modification, and to permit persons
-to whom the Software is furnished to do so, provided that the
-following conditions are met:
-.Bl -bullet
-.It
-Redistributions of source code must retain the above copyright
-notice, this list of conditions and the following disclaimers.
-.It
-Redistributions in binary form must reproduce the above copyright
-notice, this list of conditions and the following disclaimers in
-the documentation and/or other materials provided with the
-distribution.
-.It
-The name of NICTA may not be used to endorse or promote products
-derived from this Software without specific prior written permission.
-.El
-.Pp
-EXCEPT AS EXPRESSLY STATED IN THIS LICENCE AND TO THE FULL EXTENT
-PERMITTED BY APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS-IS" AND
-NICTA MAKES NO REPRESENTATIONS, WARRANTIES OR CONDITIONS OF ANY
-KIND, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY
-REPRESENTATIONS, WARRANTIES OR CONDITIONS REGARDING THE CONTENTS
-OR ACCURACY OF THE SOFTWARE, OR OF TITLE, MERCHANTABILITY, FITNESS
-FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, THE ABSENCE OF LATENT
-OR OTHER DEFECTS, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR
-NOT DISCOVERABLE.
-.Pp
-TO THE FULL EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL
-NICTA BE LIABLE ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION,
-NEGLIGENCE) FOR ANY LOSS OR DAMAGE WHATSOEVER, INCLUDING (WITHOUT
-LIMITATION) LOSS OF PRODUCTION OR OPERATION TIME, LOSS, DAMAGE OR
-CORRUPTION OF DATA OR RECORDS; OR LOSS OF ANTICIPATED SAVINGS,
-OPPORTUNITY, REVENUE, PROFIT OR GOODWILL, OR OTHER ECONOMIC LOSS;
-OR ANY SPECIAL, INCIDENTAL, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
-EXEMPLARY DAMAGES ARISING OUT OF OR IN CONNECTION WITH THIS LICENCE,
-THE SOFTWARE OR THE USE OF THE SOFTWARE, EVEN IF NICTA HAS BEEN
-ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-.Pp
-If applicable legislation implies warranties or conditions, or
-imposes obligations or liability on NICTA in respect of the Software
-that cannot be wholly or partly excluded, restricted or modified,
-NICTA's liability is limited, to the full extent permitted by the
-applicable legislation, at its option, to:
-.Pp
-.Bl -tag -width "a." -compact
-.It a.
-in the case of goods, any one or more of the following:
-.Bl -tag -width "iii." -compact
-.It i.
-the replacement of the goods or the supply of equivalent goods;
-.It ii.
-the repair of the goods;
-.It iii.
-the payment of the cost of replacing the goods or of acquiring
-equivalent goods;
-.It iv.
-the payment of the cost of having the goods repaired; or
-.El
-.It b.
-in the case of services:
-.Bl -tag -width "iii." -compact
-.It i.
-the supplying of the services again; or 
-.It ii.
-the payment of the cost of having the services supplied again.
-.El
-.El

package/android/src/main/jni/mdnsresponder/mDNSPosix/parselog.py

@@ -1,247 +0,0 @@
-#!/usr/bin/python
-# Emacs settings: -*- tab-width: 4 -*-
-#
-# Copyright (c) 2002-2003 Apple Computer, Inc. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-# 
-#     http://www.apache.org/licenses/LICENSE-2.0
-# 
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# parselog.py, written and contributed by Kevin Marks
-#
-# Requires OS X 10.3 Panther or later, for Python and Core Graphics Python APIs
-# Invoke from the command line with "parselog.py fname" where fname is a log file made by mDNSNetMonitor
-#
-# Caveats:
-# It expects plain ASCII, and doesn't handle spaces in record names very well right now
-# There's a procedure you can follow to 'sanitize' an mDNSNetMonitor log file to make it more paletable to parselog.py:
-# 1. Run mDNSNetMonitor in a terminal window.
-#    When you have enough traffic, type Ctrl-C and save the content of the terminal window to disk.
-#    Alternatively, you can use "mDNSNetMonitor > logfile" to write the text directly to a file.
-#    You now have a UTF-8 text file.
-# 2. Open the UTF-8 text file using BBEdit or some other text editor.
-#    (These instructions are for BBEdit, which I highly recommend you use when doing this.)
-# 3. Make sure BBEdit correctly interprets the file as UTF-8.
-#    Either set your "Text Files Opening" preference to "UTF-8 no BOM", and drop the file onto BBEdit,
-#    or manually open the File using "File -> Open" and make sure the "Read As" setting is set to "UTF-8 no BOM"
-#    Check in the document pulldown menu in the window toolbar to make sure that it says "Encoding: UTF-8 no BOM"
-# 4. Use "Tools -> Convert to ASCII" to replace all special characters with their seven-bit ascii equivalents.
-#    (e.g. curly quotes are converted to straight quotes)
-# 5. Do a grep search and replace. (Cmd-F; make sure Grep checkbox is turned on.)
-#    Enter this search text     : ^(.................\(................\S*) (.* -> .*)$
-#    Enter this replacement text: \1-\2
-#    Click "Replace All"
-#    Press Cmd-Opt-= repeatedly until there are no more instances to be replaced.
-#    You now have text file with all spaces in names changed to hyphens
-# 6. Save the new file. You can save it as "UTF-8 no BOM", or as "Mac Roman". It really doesn't matter which --
-#    the file now contains only seven-bit ascii, so it's all the same no matter how you save it.
-# 7. Run "parselog.py fname"
-# 8. Open the resulting fname.pdf file with a PDF viewer like Preview on OS X
-#
-# Key to what you see:
-# Time is on the horizontal axis
-# Individual machines are shown on the vertical axis
-# Filled red    circle: Normal query              Hollow red    circle: Query requesting unicast reply
-# Filled orange circle: Probe (service starting)  Hollow orange circle: First probe (requesting unicast reply)
-# Filled green  circle: Normal answer             Hollow green  circle: Goodbye message (record going away)
-#                                                 Hollow blue   circle: Legacy query (from old client)
-
-from CoreGraphics import *
-import math   # for pi
-
-import string
-import sys, os
-import re
-
-def parselog(inFile):
-	f = open(inFile)
-	hunt = 'getTime'
-	ipList = {}
-	querySource = {}
-	plotPoints = []
-	maxTime=0
-	minTime = 36*60*60
-	spaceExp = re.compile(r'\s+')
-	print "Reading " + inFile
-	while 1:
-		lines = f.readlines(100000)
-		if not lines:
-			break
-		for line in lines:
-			if (hunt == 'skip'):
-				if (line == '\n' or line == '\r' or line ==''): 
-					hunt = 'getTime'
-#				else:
-#					msg = ("skipped" , line)
-#					print msg
-			elif (hunt == 'getTime'):
-				if (line == "^C\n" ):
-					break
-				time = line.split(' ')[0].split(':')
-				if (len(time)<3):
-					#print "bad time, skipping",time
-					hunt = 'skip'
-				else:
-					hunt = 'getIP'
-				#print (("getTime:%s" % (line)), time)
-			elif (hunt == 'getIP'):
-				ip = line.split(' ',1)
-				ip = ip[0]
-				secs=0
-				for t in time:
-					secs = secs*60 +float(t)
-				if (secs>maxTime):
-					maxTime=secs
-				if (secs<minTime):
-					minTime=secs
-				if (not ip in ipList):
-					ipList[ip] = [len(ipList), "", ""]
-				#print (("getIP:%s" % (line)), time, secs)
-				hunt = 'getQA'
-			elif (hunt == 'getQA'):
-				qaList = spaceExp.split(line)
-				# qaList[0] Source Address
-				# qaList[1] Operation type (PU/PM/QU/QM/AN etc.)
-				# qaList[2] Record type (PTR/SRV/TXT etc.)
-				# For QU/QM/LQ:
-				# qaList[3] RR name
-				# For PU/PM/AN/AN+/AD/AD+/KA:
-				# qaList[3] TTL
-				# qaList[4] RR name
-				# qaList[5...] "->" symbol and following rdata
-				#print qaList
-				if (qaList[0] == ip):
-					if (qaList[1] == '(QU)' or qaList[1] == '(LQ)' or qaList[1] == '(PU)'):
-						plotPoints.append([secs, ipList[ip][0], (qaList[1])[1:-1]])
-					elif (qaList[1] == '(QM)'):
-						plotPoints.append([secs, ipList[ip][0], (qaList[1])[1:-1]])
-						querySource[qaList[3]] = len(plotPoints)-1
-					elif (qaList[1] == '(PM)'):
-						plotPoints.append([secs, ipList[ip][0], (qaList[1])[1:-1]])
-						querySource[qaList[4]] = len(plotPoints)-1
-					elif (qaList[1] == '(AN)' or qaList[1] == '(AN+)' or qaList[1] == '(DE)'):
-						plotPoints.append([secs, ipList[ip][0], (qaList[1])[1:-1]])
-						try:
-							theQuery = querySource[qaList[4]]
-							theDelta = secs - plotPoints[theQuery][0]
-							if (theDelta < 1.0):
-								plotPoints[-1].append(querySource[qaList[4]])
-							#print "Answer AN+ %s points to %d" % (qaList[4],querySource[qaList[4]])
-						except:
-							#print "Couldn't find any preceeding question for", qaList
-							pass
-					elif (qaList[1] != '(KA)' and qaList[1] != '(AD)' and qaList[1] != '(AD+)'):
-						print "Operation unknown", qaList
-
-					if (qaList[1] == '(AN)' or qaList[1] == '(AN+)' or qaList[1] == '(AD)' or qaList[1] == '(AD+)'):
-						if (qaList[2] == 'HINFO'):
-							ipList[ip][1] = qaList[4]
-							ipList[ip][2] = string.join(qaList[6:])
-							#print ipList[ip][1]
-						elif (qaList[2] == 'AAAA'):
-							if (ipList[ip][1] == ""):
-								ipList[ip][1] = qaList[4]
-								ipList[ip][2] = "Panther"
-						elif (qaList[2] == 'Addr'):
-							if (ipList[ip][1] == ""):
-								ipList[ip][1] = qaList[4]
-								ipList[ip][2] = "Jaguar"
-				else:
-					if (line == '\n'): 
-						hunt = 'getTime'
-					else:
-						hunt = 'skip'
-	f.close()
-	#print plotPoints
-	#print querySource
-	#width=20.0*(maxTime-minTime)
-	if (maxTime < minTime + 10.0):
-		maxTime = minTime + 10.0
-	typesize = 12
-	width=20.0*(maxTime-minTime)
-	pageHeight=(len(ipList)+1) * typesize
-	scale = width/(maxTime-minTime)
-	leftMargin = typesize * 60
-	bottomMargin = typesize
-	pageRect = CGRectMake (-leftMargin, -bottomMargin,  leftMargin + width, bottomMargin + pageHeight)   #  landscape
-	outFile = "%s.pdf" % (".".join(inFile.split('.')[:-1]))
-	c = CGPDFContextCreateWithFilename (outFile, pageRect)
-	print "Writing " + outFile
-	ourColourSpace = c.getColorSpace()
-	# QM/QU red    solid/hollow
-	# PM/PU orange solid/hollow
-	# LQ    blue         hollow
-	# AN/DA green  solid/hollow
-	#colourLookup = {"L":(0.0,0.0,.75), "Q":(.75,0.0,0.0), "P":(.75,0.5,0.0), "A":(0.0,0.75,0.0), "D":(0.0,0.75,0.0), "?":(.25,0.25,0.25)}
-	colourLookup = {"L":(0.0,0.0,1.0), "Q":(1.0,0.0,0.0), "P":(1.0,0.8,0.0), "A":(0.0,1.0,0.0), "D":(0.0,1.0,0.0), "?":(1.0,1.0,1.0)}
-	c.beginPage (pageRect)
-	c.setRGBFillColor(.75,0.0,0.0,1.0)
-	c.setRGBStrokeColor(.25,0.75,0.25,1.0)
-	c.setLineWidth(0.25)
-	for point in plotPoints:
-		#c.addArc((point[0]-minTime)*scale,point[1]*typesize+6,5,0,2*math.pi,1)
-		c.addArc((point[0]-minTime)*scale,point[1]*typesize+6,typesize/4,0,2*math.pi,1)
-		theColour = colourLookup[(point[2])[0]]
-		if (((point[2])[0]) != "L") and (((point[2])[0]) != "Q") and (((point[2])[0]) != "P") and (((point[2])[0]) != "A") and (((point[2])[0]) != "D"):
-			print "Unknown", point
-		if ((point[2])[-1] == "M" or (point[2])[0]== "A"):
-			c.setRGBFillColor(theColour[0],theColour[1],theColour[2],.5)
-			c.fillPath()
-		else:
-			c.setRGBStrokeColor(theColour[0],theColour[1],theColour[2],.5)
-			c.setLineWidth(1.0)
-			c.strokePath()
-		c.setRGBStrokeColor(.25,0.75,0.25,1.0)
-		c.setLineWidth(0.25)
-		for index in point[3:]:
-			c.beginPath()
-			c.moveToPoint((point[0]-minTime)*scale,point[1]*typesize+6)
-			c.addLineToPoint(((plotPoints[index])[0]-minTime)*scale,(plotPoints[index])[1]*typesize+6)
-			c.closePath()
-			c.strokePath()
-	c.setRGBFillColor (0,0,0, 1)
-	c.setTextDrawingMode (kCGTextFill)
-	c.setTextMatrix (CGAffineTransformIdentity)
-	c.selectFont ('Gill Sans', typesize, kCGEncodingMacRoman)
-	c.setRGBStrokeColor(0.25,0.0,0.0,1.0)
-	c.setLineWidth(0.1)
-	for ip,[height,hname,hinfo] in ipList.items():
-		c.beginPath()
-		c.moveToPoint(pageRect.origin.x,height*typesize+6)
-		c.addLineToPoint(width,height*typesize+6)
-		c.closePath()
-		c.strokePath()
-		c.showTextAtPoint(pageRect.origin.x + 2,               height*typesize + 2, ip,    len(ip))
-		c.showTextAtPoint(pageRect.origin.x + 2 + typesize*8,  height*typesize + 2, hname, len(hname))
-		c.showTextAtPoint(pageRect.origin.x + 2 + typesize*25, height*typesize + 2, hinfo, len(hinfo))
-	for time in range (int(minTime),int(maxTime)+1):
-		c.beginPath()
-		c.moveToPoint((time-minTime)*scale,pageRect.origin.y)
-		c.addLineToPoint((time-minTime)*scale,pageHeight)
-		c.closePath()
-		if (int(time) % 10 == 0):
-			theHours = time/3600
-			theMinutes = time/60 % 60
-			theSeconds = time % 60
-			theTimeString = '%d:%02d:%02d' % (theHours, theMinutes, theSeconds)
-			# Should measure string width, but don't know how to do that
-			theStringWidth = typesize * 3.5
-			c.showTextAtPoint((time-minTime)*scale - theStringWidth/2, pageRect.origin.y + 2, theTimeString, len(theTimeString))
-			c.setLineWidth(0.3)
-		else:
-			c.setLineWidth(0.1)
-		c.strokePath()
-	c.endPage()
-	c.finish()
-
-			
-for arg in sys.argv[1:]:
-	parselog(arg)