react-native-zeroconf 0.13.8 → 0.14.0

package/android/src/main/jni/mdnsresponder/mDNSPosix/nss_mdns.conf

@@ -0,0 +1,13 @@
+# Defaut configuration file for nss_mdns
+
+# Applicable domains
+domain local
+domain 254.169.in-addr.arpa
+domain 8.e.f.ip6.int
+domain 9.e.f.ip6.int
+domain a.e.f.ip6.int
+domain b.e.f.ip6.int
+domain 8.e.f.ip6.arpa
+domain 9.e.f.ip6.arpa
+domain a.e.f.ip6.arpa
+domain b.e.f.ip6.arpa

package/android/src/main/jni/mdnsresponder/mDNSPosix/nss_mdns.conf.5

@@ -0,0 +1,135 @@
+.\"
+.\" See section LICENSE for license information.
+.\"
+.Dd June 15, 2004
+.Dt NSS_MDNS.CONF 5
+.Os
+.Sh NAME
+.Nm nss_mdns.conf
+.Nd configuration file for
+.Xr libnss_mdns 8 .
+.Sh DESCRIPTION
+This file describes the domains that
+.Xr libnss_mdns 8
+is to support.  If a lookup domain is not in this list, then
+.Li NSS_STATUS_NOTFOUND
+will be returned to libc and processing will continue according to
+.Xr nsswitch.conf 5 .
+.Ss Configuration file format
+Lines containing only whitespace or lines whose first non-whitespace character is
+.Ql #
+are ignored.  No single line may be greater than 1023 characters plus end-of-line.
+.Pp
+.D1 Ic domain Ar x.y.z
+.Pp
+Enable use of
+.Xr libnss_mdns 8
+to lookup DNS entries in the
+.Ql x.y.z
+domain.  Leading and trailing dots are dropped.
+.Pp
+Reverse (PTR) lookups are enabled using their DNS names.  IPv6 names use
+.Qq nibble format .
+.Pp
+.Dl domain 254.169.in-addr.arpa
+.Dl domain 0.8.e.f.ip6.arpa
+.Ss Default configuration
+If the configuration file cannot be found then the following is assumed.
+.Bd -literal -offset indent
+domain local
+domain 0.8.e.f.ip6.int
+domain 0.8.e.f.ip6.arpa
+domain 254.169.in-addr.arpa
+.Ed
+.Sh SEE ALSO
+.\" Cross-references should be ordered by section (low to high), then in
+.\"     alphabetical order.
+.Xr nsswitch.conf 5 ,
+.Xr libnss_mdns 8
+.\" .Sh STANDARDS
+.Sh HISTORY
+.Xr libnss_mdns 8
+was originally written for
+.An NICTA Bq http://www.nicta.com.au/ .
+.Sh AUTHORS
+.An "Andrew White" Bq Andrew.White@nicta.com.au
+.Sh LICENSE
+This software is licensed under the NICTA Public Source License version 1.0
+.Ss NICTA Public Software Licence
+Version 1.0
+.Pp
+Copyright 2004 National ICT Australia Ltd
+.Pp
+All rights reserved.
+.Pp
+By this licence, National ICT Australia Ltd (NICTA) grants permission,
+free of charge, to any person who obtains a copy of this software
+and any associated documentation files ("the Software") to use and
+deal with the Software in source code and binary forms without
+restriction, with or without modification, and to permit persons
+to whom the Software is furnished to do so, provided that the
+following conditions are met:
+.Bl -bullet
+.It
+Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimers.
+.It
+Redistributions in binary form must reproduce the above copyright
+notice, this list of conditions and the following disclaimers in
+the documentation and/or other materials provided with the
+distribution.
+.It
+The name of NICTA may not be used to endorse or promote products
+derived from this Software without specific prior written permission.
+.El
+.Pp
+EXCEPT AS EXPRESSLY STATED IN THIS LICENCE AND TO THE FULL EXTENT
+PERMITTED BY APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS-IS" AND
+NICTA MAKES NO REPRESENTATIONS, WARRANTIES OR CONDITIONS OF ANY
+KIND, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY
+REPRESENTATIONS, WARRANTIES OR CONDITIONS REGARDING THE CONTENTS
+OR ACCURACY OF THE SOFTWARE, OR OF TITLE, MERCHANTABILITY, FITNESS
+FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, THE ABSENCE OF LATENT
+OR OTHER DEFECTS, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR
+NOT DISCOVERABLE.
+.Pp
+TO THE FULL EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL
+NICTA BE LIABLE ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION,
+NEGLIGENCE) FOR ANY LOSS OR DAMAGE WHATSOEVER, INCLUDING (WITHOUT
+LIMITATION) LOSS OF PRODUCTION OR OPERATION TIME, LOSS, DAMAGE OR
+CORRUPTION OF DATA OR RECORDS; OR LOSS OF ANTICIPATED SAVINGS,
+OPPORTUNITY, REVENUE, PROFIT OR GOODWILL, OR OTHER ECONOMIC LOSS;
+OR ANY SPECIAL, INCIDENTAL, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
+EXEMPLARY DAMAGES ARISING OUT OF OR IN CONNECTION WITH THIS LICENCE,
+THE SOFTWARE OR THE USE OF THE SOFTWARE, EVEN IF NICTA HAS BEEN
+ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+.Pp
+If applicable legislation implies warranties or conditions, or
+imposes obligations or liability on NICTA in respect of the Software
+that cannot be wholly or partly excluded, restricted or modified,
+NICTA's liability is limited, to the full extent permitted by the
+applicable legislation, at its option, to:
+.Pp
+.Bl -tag -width "a." -compact
+.It a.
+in the case of goods, any one or more of the following:
+.Bl -tag -width "iii." -compact
+.It i.
+the replacement of the goods or the supply of equivalent goods;
+.It ii.
+the repair of the goods;
+.It iii.
+the payment of the cost of replacing the goods or of acquiring
+equivalent goods;
+.It iv.
+the payment of the cost of having the goods repaired; or
+.El
+.It b.
+in the case of services:
+.Bl -tag -width "iii." -compact
+.It i.
+the supplying of the services again; or 
+.It ii.
+the payment of the cost of having the services supplied again.
+.El
+.El

package/android/src/main/jni/mdnsresponder/mDNSPosix/parselog.py

@@ -0,0 +1,247 @@
+#!/usr/bin/python
+# Emacs settings: -*- tab-width: 4 -*-
+#
+# Copyright (c) 2002-2003 Apple Computer, Inc. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#     http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# parselog.py, written and contributed by Kevin Marks
+#
+# Requires OS X 10.3 Panther or later, for Python and Core Graphics Python APIs
+# Invoke from the command line with "parselog.py fname" where fname is a log file made by mDNSNetMonitor
+#
+# Caveats:
+# It expects plain ASCII, and doesn't handle spaces in record names very well right now
+# There's a procedure you can follow to 'sanitize' an mDNSNetMonitor log file to make it more paletable to parselog.py:
+# 1. Run mDNSNetMonitor in a terminal window.
+#    When you have enough traffic, type Ctrl-C and save the content of the terminal window to disk.
+#    Alternatively, you can use "mDNSNetMonitor > logfile" to write the text directly to a file.
+#    You now have a UTF-8 text file.
+# 2. Open the UTF-8 text file using BBEdit or some other text editor.
+#    (These instructions are for BBEdit, which I highly recommend you use when doing this.)
+# 3. Make sure BBEdit correctly interprets the file as UTF-8.
+#    Either set your "Text Files Opening" preference to "UTF-8 no BOM", and drop the file onto BBEdit,
+#    or manually open the File using "File -> Open" and make sure the "Read As" setting is set to "UTF-8 no BOM"
+#    Check in the document pulldown menu in the window toolbar to make sure that it says "Encoding: UTF-8 no BOM"
+# 4. Use "Tools -> Convert to ASCII" to replace all special characters with their seven-bit ascii equivalents.
+#    (e.g. curly quotes are converted to straight quotes)
+# 5. Do a grep search and replace. (Cmd-F; make sure Grep checkbox is turned on.)
+#    Enter this search text     : ^(.................\(................\S*) (.* -> .*)$
+#    Enter this replacement text: \1-\2
+#    Click "Replace All"
+#    Press Cmd-Opt-= repeatedly until there are no more instances to be replaced.
+#    You now have text file with all spaces in names changed to hyphens
+# 6. Save the new file. You can save it as "UTF-8 no BOM", or as "Mac Roman". It really doesn't matter which --
+#    the file now contains only seven-bit ascii, so it's all the same no matter how you save it.
+# 7. Run "parselog.py fname"
+# 8. Open the resulting fname.pdf file with a PDF viewer like Preview on OS X
+#
+# Key to what you see:
+# Time is on the horizontal axis
+# Individual machines are shown on the vertical axis
+# Filled red    circle: Normal query              Hollow red    circle: Query requesting unicast reply
+# Filled orange circle: Probe (service starting)  Hollow orange circle: First probe (requesting unicast reply)
+# Filled green  circle: Normal answer             Hollow green  circle: Goodbye message (record going away)
+#                                                 Hollow blue   circle: Legacy query (from old client)
+
+from CoreGraphics import *
+import math   # for pi
+
+import string
+import sys, os
+import re
+
+def parselog(inFile):
+	f = open(inFile)
+	hunt = 'getTime'
+	ipList = {}
+	querySource = {}
+	plotPoints = []
+	maxTime=0
+	minTime = 36*60*60
+	spaceExp = re.compile(r'\s+')
+	print "Reading " + inFile
+	while 1:
+		lines = f.readlines(100000)
+		if not lines:
+			break
+		for line in lines:
+			if (hunt == 'skip'):
+				if (line == '\n' or line == '\r' or line ==''): 
+					hunt = 'getTime'
+#				else:
+#					msg = ("skipped" , line)
+#					print msg
+			elif (hunt == 'getTime'):
+				if (line == "^C\n" ):
+					break
+				time = line.split(' ')[0].split(':')
+				if (len(time)<3):
+					#print "bad time, skipping",time
+					hunt = 'skip'
+				else:
+					hunt = 'getIP'
+				#print (("getTime:%s" % (line)), time)
+			elif (hunt == 'getIP'):
+				ip = line.split(' ',1)
+				ip = ip[0]
+				secs=0
+				for t in time:
+					secs = secs*60 +float(t)
+				if (secs>maxTime):
+					maxTime=secs
+				if (secs<minTime):
+					minTime=secs
+				if (not ip in ipList):
+					ipList[ip] = [len(ipList), "", ""]
+				#print (("getIP:%s" % (line)), time, secs)
+				hunt = 'getQA'
+			elif (hunt == 'getQA'):
+				qaList = spaceExp.split(line)
+				# qaList[0] Source Address
+				# qaList[1] Operation type (PU/PM/QU/QM/AN etc.)
+				# qaList[2] Record type (PTR/SRV/TXT etc.)
+				# For QU/QM/LQ:
+				# qaList[3] RR name
+				# For PU/PM/AN/AN+/AD/AD+/KA:
+				# qaList[3] TTL
+				# qaList[4] RR name
+				# qaList[5...] "->" symbol and following rdata
+				#print qaList
+				if (qaList[0] == ip):
+					if (qaList[1] == '(QU)' or qaList[1] == '(LQ)' or qaList[1] == '(PU)'):
+						plotPoints.append([secs, ipList[ip][0], (qaList[1])[1:-1]])
+					elif (qaList[1] == '(QM)'):
+						plotPoints.append([secs, ipList[ip][0], (qaList[1])[1:-1]])
+						querySource[qaList[3]] = len(plotPoints)-1
+					elif (qaList[1] == '(PM)'):
+						plotPoints.append([secs, ipList[ip][0], (qaList[1])[1:-1]])
+						querySource[qaList[4]] = len(plotPoints)-1
+					elif (qaList[1] == '(AN)' or qaList[1] == '(AN+)' or qaList[1] == '(DE)'):
+						plotPoints.append([secs, ipList[ip][0], (qaList[1])[1:-1]])
+						try:
+							theQuery = querySource[qaList[4]]
+							theDelta = secs - plotPoints[theQuery][0]
+							if (theDelta < 1.0):
+								plotPoints[-1].append(querySource[qaList[4]])
+							#print "Answer AN+ %s points to %d" % (qaList[4],querySource[qaList[4]])
+						except:
+							#print "Couldn't find any preceeding question for", qaList
+							pass
+					elif (qaList[1] != '(KA)' and qaList[1] != '(AD)' and qaList[1] != '(AD+)'):
+						print "Operation unknown", qaList
+
+					if (qaList[1] == '(AN)' or qaList[1] == '(AN+)' or qaList[1] == '(AD)' or qaList[1] == '(AD+)'):
+						if (qaList[2] == 'HINFO'):
+							ipList[ip][1] = qaList[4]
+							ipList[ip][2] = string.join(qaList[6:])
+							#print ipList[ip][1]
+						elif (qaList[2] == 'AAAA'):
+							if (ipList[ip][1] == ""):
+								ipList[ip][1] = qaList[4]
+								ipList[ip][2] = "Panther"
+						elif (qaList[2] == 'Addr'):
+							if (ipList[ip][1] == ""):
+								ipList[ip][1] = qaList[4]
+								ipList[ip][2] = "Jaguar"
+				else:
+					if (line == '\n'): 
+						hunt = 'getTime'
+					else:
+						hunt = 'skip'
+	f.close()
+	#print plotPoints
+	#print querySource
+	#width=20.0*(maxTime-minTime)
+	if (maxTime < minTime + 10.0):
+		maxTime = minTime + 10.0
+	typesize = 12
+	width=20.0*(maxTime-minTime)
+	pageHeight=(len(ipList)+1) * typesize
+	scale = width/(maxTime-minTime)
+	leftMargin = typesize * 60
+	bottomMargin = typesize
+	pageRect = CGRectMake (-leftMargin, -bottomMargin,  leftMargin + width, bottomMargin + pageHeight)   #  landscape
+	outFile = "%s.pdf" % (".".join(inFile.split('.')[:-1]))
+	c = CGPDFContextCreateWithFilename (outFile, pageRect)
+	print "Writing " + outFile
+	ourColourSpace = c.getColorSpace()
+	# QM/QU red    solid/hollow
+	# PM/PU orange solid/hollow
+	# LQ    blue         hollow
+	# AN/DA green  solid/hollow
+	#colourLookup = {"L":(0.0,0.0,.75), "Q":(.75,0.0,0.0), "P":(.75,0.5,0.0), "A":(0.0,0.75,0.0), "D":(0.0,0.75,0.0), "?":(.25,0.25,0.25)}
+	colourLookup = {"L":(0.0,0.0,1.0), "Q":(1.0,0.0,0.0), "P":(1.0,0.8,0.0), "A":(0.0,1.0,0.0), "D":(0.0,1.0,0.0), "?":(1.0,1.0,1.0)}
+	c.beginPage (pageRect)
+	c.setRGBFillColor(.75,0.0,0.0,1.0)
+	c.setRGBStrokeColor(.25,0.75,0.25,1.0)
+	c.setLineWidth(0.25)
+	for point in plotPoints:
+		#c.addArc((point[0]-minTime)*scale,point[1]*typesize+6,5,0,2*math.pi,1)
+		c.addArc((point[0]-minTime)*scale,point[1]*typesize+6,typesize/4,0,2*math.pi,1)
+		theColour = colourLookup[(point[2])[0]]
+		if (((point[2])[0]) != "L") and (((point[2])[0]) != "Q") and (((point[2])[0]) != "P") and (((point[2])[0]) != "A") and (((point[2])[0]) != "D"):
+			print "Unknown", point
+		if ((point[2])[-1] == "M" or (point[2])[0]== "A"):
+			c.setRGBFillColor(theColour[0],theColour[1],theColour[2],.5)
+			c.fillPath()
+		else:
+			c.setRGBStrokeColor(theColour[0],theColour[1],theColour[2],.5)
+			c.setLineWidth(1.0)
+			c.strokePath()
+		c.setRGBStrokeColor(.25,0.75,0.25,1.0)
+		c.setLineWidth(0.25)
+		for index in point[3:]:
+			c.beginPath()
+			c.moveToPoint((point[0]-minTime)*scale,point[1]*typesize+6)
+			c.addLineToPoint(((plotPoints[index])[0]-minTime)*scale,(plotPoints[index])[1]*typesize+6)
+			c.closePath()
+			c.strokePath()
+	c.setRGBFillColor (0,0,0, 1)
+	c.setTextDrawingMode (kCGTextFill)
+	c.setTextMatrix (CGAffineTransformIdentity)
+	c.selectFont ('Gill Sans', typesize, kCGEncodingMacRoman)
+	c.setRGBStrokeColor(0.25,0.0,0.0,1.0)
+	c.setLineWidth(0.1)
+	for ip,[height,hname,hinfo] in ipList.items():
+		c.beginPath()
+		c.moveToPoint(pageRect.origin.x,height*typesize+6)
+		c.addLineToPoint(width,height*typesize+6)
+		c.closePath()
+		c.strokePath()
+		c.showTextAtPoint(pageRect.origin.x + 2,               height*typesize + 2, ip,    len(ip))
+		c.showTextAtPoint(pageRect.origin.x + 2 + typesize*8,  height*typesize + 2, hname, len(hname))
+		c.showTextAtPoint(pageRect.origin.x + 2 + typesize*25, height*typesize + 2, hinfo, len(hinfo))
+	for time in range (int(minTime),int(maxTime)+1):
+		c.beginPath()
+		c.moveToPoint((time-minTime)*scale,pageRect.origin.y)
+		c.addLineToPoint((time-minTime)*scale,pageHeight)
+		c.closePath()
+		if (int(time) % 10 == 0):
+			theHours = time/3600
+			theMinutes = time/60 % 60
+			theSeconds = time % 60
+			theTimeString = '%d:%02d:%02d' % (theHours, theMinutes, theSeconds)
+			# Should measure string width, but don't know how to do that
+			theStringWidth = typesize * 3.5
+			c.showTextAtPoint((time-minTime)*scale - theStringWidth/2, pageRect.origin.y + 2, theTimeString, len(theTimeString))
+			c.setLineWidth(0.3)
+		else:
+			c.setLineWidth(0.1)
+		c.strokePath()
+	c.endPage()
+	c.finish()
+
+			
+for arg in sys.argv[1:]:
+	parselog(arg)