react-native-windows 0.84.0 → 0.85.0-preview.2

package/external/folly/folly/String.h

@@ -0,0 +1,767 @@
+/*
+ * Copyright (c) Meta Platforms, Inc. and affiliates.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+//
+// Docs: https://fburl.com/fbcref_string
+//
+
+/**
+ * Convenience functions for working with strings.
+ *
+ * @file String.h
+ */
+
+#pragma once
+#define FOLLY_STRING_H_
+
+#include <cstdarg>
+#include <exception>
+#include <string>
+#include <unordered_map>
+#include <unordered_set>
+#include <vector>
+
+#include <folly/Conv.h>
+#include <folly/ExceptionString.h>
+#include <folly/Optional.h>
+#include <folly/Portability.h>
+#include <folly/Range.h>
+#include <folly/ScopeGuard.h>
+#include <folly/Traits.h>
+#include <folly/Unit.h>
+#include <folly/detail/SimpleSimdStringUtils.h>
+#include <folly/detail/SplitStringSimd.h>
+
+namespace folly {
+
+/**
+ * @overloadbrief C-escape a string.
+ *
+ * Make the string suitable for representation as a C string
+ * literal.  Appends the result to the output string.
+ *
+ * Backslashes all occurrences of backslash, double-quote, and question mark:
+ *   "  ->  \"
+ *   \  ->  \\
+ *   ?  ->  \?
+ *
+ * (Question marks are escaped in order to prevent creating trigraphs in
+ * the output -- "??x" where x is one of "=/'()!<>-")
+ *
+ * Also backslashes certain whitespace characters: \n, \r, \t
+ *
+ * Replaces all non-printable ASCII characters with backslash-octal
+ * representation:
+ *   <ASCII 254> -> \376
+ *
+ * Note that we use backslash-octal instead of backslash-hex because the octal
+ * representation is guaranteed to consume no more than 3 characters; "\3760"
+ * represents two characters, one with value 254, and one with value 48 ('0'),
+ * whereas "\xfe0" represents only one character (with value 4064, which leads
+ * to implementation-defined behavior).
+ */
+template <class String>
+void cEscape(StringPiece str, String& out);
+
+/**
+ * Similar to cEscape above, but returns the escaped string.
+ */
+template <class String>
+String cEscape(StringPiece str) {
+  String out;
+  cEscape(str, out);
+  return out;
+}
+
+/**
+ * @overloadbrief C-Unescape a string.
+ *
+ * The opposite of cEscape above.  Appends the result
+ * to the output string.
+ *
+ * Recognizes the standard C escape sequences:
+ *
+ * \code
+ * \' \" \? \\ \a \b \f \n \r \t \v
+ * \[0-7]+
+ * \x[0-9a-fA-F]+
+ * \endcode
+ *
+ * In strict mode (default), throws std::invalid_argument if it encounters
+ * an unrecognized escape sequence.  In non-strict mode, it leaves
+ * the escape sequence unchanged.
+ */
+template <class String>
+void cUnescape(StringPiece str, String& out, bool strict = true);
+
+/**
+ * Similar to cUnescape above, but returns the escaped string.
+ */
+template <class String>
+String cUnescape(StringPiece str, bool strict = true) {
+  String out;
+  cUnescape(str, out, strict);
+  return out;
+}
+
+/**
+ * @overloadbrief URI-escape a string.
+ *
+ * Appends the result to the output string.
+ *
+ * Alphanumeric characters and other characters marked as "unreserved" in RFC
+ * 3986 ( -_.~ ) are left unchanged.  In PATH mode, the forward slash (/) is
+ * also left unchanged.  In QUERY mode, spaces are replaced by '+'.  All other
+ * characters are percent-encoded.
+ */
+enum class UriEscapeMode : unsigned char {
+  // The values are meaningful, see generate_escape_tables.py
+  ALL = 0,
+  QUERY = 1,
+  PATH = 2
+};
+template <class String>
+void uriEscape(
+    StringPiece str, String& out, UriEscapeMode mode = UriEscapeMode::ALL);
+
+/**
+ * Similar to uriEscape above, but returns the escaped string.
+ */
+template <class String>
+String uriEscape(StringPiece str, UriEscapeMode mode = UriEscapeMode::ALL) {
+  String out;
+  uriEscape(str, out, mode);
+  return out;
+}
+
+/**
+ * @overloadbrief URI-unescape a string.
+ *
+ * Appends the result to the output string.
+ *
+ * In QUERY mode, '+' are replaced by space.  %XX sequences are decoded if
+ * XX is a valid hex sequence, otherwise we return an unexpected
+ * std::invalid_argument.
+ */
+template <class String>
+bool tryUriUnescape(
+    StringPiece str, String& out, UriEscapeMode mode = UriEscapeMode::ALL);
+
+/**
+ * Similar to tryUriUnescape above, but returning the unescaped string as a
+ * folly::Expected.
+ */
+template <class String>
+folly::Optional<String> tryUriUnescape(
+    StringPiece str, UriEscapeMode mode = UriEscapeMode::ALL) {
+  String out;
+  auto success = tryUriUnescape(str, out, mode);
+
+  if (!success) {
+    return folly::none;
+  }
+
+  return out;
+}
+
+/**
+ * Similar to tryUriUnescape above, but without folly::Expected wrapping, and
+ * throwing std::invalid_argument on malformed input.
+ */
+template <class String>
+void uriUnescape(
+    StringPiece str, String& out, UriEscapeMode mode = UriEscapeMode::ALL);
+
+/**
+ * Similar to uriUnescape above, but returns the unescaped string.
+ */
+template <class String>
+String uriUnescape(StringPiece str, UriEscapeMode mode = UriEscapeMode::ALL) {
+  String out;
+  uriUnescape(str, out, mode);
+  return out;
+}
+
+/**
+ * @overloadbrief printf into a string.
+ *
+ * stringPrintf is much like printf but deposits its result into a
+ * string. Two signatures are supported: the first simply returns the
+ * resulting string, and the second appends the produced characters to
+ * the specified string and returns a reference to it.
+ */
+std::string stringPrintf(FOLLY_PRINTF_FORMAT const char* format, ...)
+    FOLLY_PRINTF_FORMAT_ATTR(1, 2);
+
+/* Similar to stringPrintf, with different signature. */
+void stringPrintf(std::string* out, FOLLY_PRINTF_FORMAT const char* format, ...)
+    FOLLY_PRINTF_FORMAT_ATTR(2, 3);
+
+/**
+ * Append printf-style output to string.
+ */
+std::string& stringAppendf(
+    std::string* output, FOLLY_PRINTF_FORMAT const char* format, ...)
+    FOLLY_PRINTF_FORMAT_ATTR(2, 3);
+
+/**
+ * @overloadbrief stringPrintf with va_list argument
+ *
+ * As with vsnprintf() itself, the value of ap is undefined after the call.
+ * These functions do not call va_end() on ap.
+ */
+std::string stringVPrintf(const char* format, va_list ap);
+void stringVPrintf(std::string* out, const char* format, va_list ap);
+
+/**
+ * Append va_list printf-style output to string.
+ */
+std::string& stringVAppendf(std::string* out, const char* format, va_list ap);
+
+/**
+ * Backslashify a string.
+ *
+ * That is, replace non-printable characters
+ * with C-style (but NOT C compliant) "\xHH" encoding.  If hex_style
+ * is false, then shorthand notations like "\0" will be used instead
+ * of "\x00" for the most common backslash cases.
+ *
+ * There are two forms, one returning the input string, and one
+ * creating output in the specified output string.
+ *
+ * This is mainly intended for printing to a terminal, so it is not
+ * particularly optimized.
+ *
+ * Do *not* use this in situations where you expect to be able to feed
+ * the string to a C or C++ compiler, as there are nuances with how C
+ * parses such strings that lead to failures.  This is for display
+ * purposed only.  If you want a string you can embed for use in C or
+ * C++, use cEscape instead.  This function is for display purposes
+ * only.
+ */
+template <class OutputString>
+void backslashify(
+    folly::StringPiece input, OutputString& output, bool hex_style = false);
+
+template <class OutputString = std::string>
+OutputString backslashify(StringPiece input, bool hex_style = false) {
+  OutputString output;
+  backslashify(input, output, hex_style);
+  return output;
+}
+
+/**
+ * Take a string and "humanify" it -- that is, make it look better.
+ *
+ * Since "better" is subjective, caveat emptor.  The basic approach is
+ * to count the number of unprintable characters.  If there are none,
+ * then the output is the input.  If there are relatively few, or if
+ * there is a long "enough" prefix of printable characters, use
+ * backslashify.  If it is mostly binary, then simply hex encode.
+ *
+ * This is an attempt to make a computer smart, and so likely is wrong
+ * most of the time.
+ */
+template <class String1, class String2>
+void humanify(const String1& input, String2& output);
+
+template <class String>
+String humanify(const String& input) {
+  String output;
+  humanify(input, output);
+  return output;
+}
+
+/**
+ * Convert input to hexadecimal representation.
+ *
+ * Same functionality as Python's binascii.hexlify.  Returns true
+ * on successful conversion.
+ *
+ * If append_output is true, append data to the output rather than
+ * replace it.
+ */
+template <class InputString, class OutputString>
+bool hexlify(
+    const InputString& input, OutputString& output, bool append = false);
+
+template <class OutputString = std::string>
+OutputString hexlify(ByteRange input) {
+  OutputString output;
+  if (!hexlify(input, output)) {
+    // hexlify() currently always returns true, so this can't really happen
+    throw_exception<std::runtime_error>("hexlify failed");
+  }
+  return output;
+}
+
+template <class OutputString = std::string>
+OutputString hexlify(StringPiece input) {
+  return hexlify<OutputString>(ByteRange{input});
+}
+
+/**
+ * Get binary data from hexadecimal representation.
+ *
+ * Same functionality as Python's binascii.unhexlify.  Returns true
+ * on successful conversion.
+ */
+template <class InputString, class OutputString>
+bool unhexlify(const InputString& input, OutputString& output);
+
+template <class OutputString = std::string>
+OutputString unhexlify(StringPiece input) {
+  OutputString output;
+  if (!unhexlify(input, output)) {
+    // unhexlify() fails if the input has non-hexidecimal characters,
+    // or if it doesn't consist of a whole number of bytes
+    throw_exception<std::domain_error>("unhexlify() called with non-hex input");
+  }
+  return output;
+}
+
+enum PrettyType {
+  PRETTY_TIME,
+  PRETTY_TIME_HMS,
+
+  PRETTY_BYTES_METRIC,
+  PRETTY_BYTES_BINARY,
+  PRETTY_BYTES = PRETTY_BYTES_BINARY,
+  PRETTY_BYTES_BINARY_IEC,
+  PRETTY_BYTES_IEC = PRETTY_BYTES_BINARY_IEC,
+
+  PRETTY_UNITS_METRIC,
+  PRETTY_UNITS_BINARY,
+  PRETTY_UNITS_BINARY_IEC,
+
+  PRETTY_SI,
+  PRETTY_NUM_TYPES,
+};
+
+/**
+ * Pretty printer for numbers with units.
+ *
+ * A pretty-printer for numbers that appends suffixes of units of the
+ * given type.  It prints 4 sig-figs of value with the most
+ * appropriate unit.
+ *
+ * If `addSpace' is true, we put a space between the units suffix and
+ * the value.
+ *
+ * Current types are:
+ *     PRETTY_TIME         - s, ms, us, ns, etc.
+ *     PRETTY_TIME_HMS     - h, m, s, ms, us, ns, etc.
+ *     PRETTY_BYTES_METRIC - kB, MB, GB, etc (goes up by 10^3 = 1000 each time)
+ *     PRETTY_BYTES        - kB, MB, GB, etc (goes up by 2^10 = 1024 each time)
+ *     PRETTY_BYTES_IEC    - KiB, MiB, GiB, etc
+ *     PRETTY_UNITS_METRIC - k, M, G, etc (goes up by 10^3 = 1000 each time)
+ *     PRETTY_UNITS_BINARY - k, M, G, etc (goes up by 2^10 = 1024 each time)
+ *     PRETTY_UNITS_BINARY_IEC - Ki, Mi, Gi, etc
+ *     PRETTY_SI           - full SI metric prefixes from yocto to Yotta
+ *                           http://en.wikipedia.org/wiki/Metric_prefix
+ *
+ */
+std::string prettyPrint(double val, PrettyType, bool addSpace = true);
+
+/**
+ * @overloadbrief Reverse prettyPrint.
+ *
+ * This utility converts StringPiece in pretty format (look above) to double,
+ * with progress information. Alters the  StringPiece parameter
+ * to get rid of the already-parsed characters.
+ * Expects string in form <floating point number> {space}* [<suffix>]
+ * If string is not in correct format, utility finds longest valid prefix and
+ * if there at least one, returns double value based on that prefix and
+ * modifies string to what is left after parsing. Throws and std::range_error
+ * exception if there is no correct parse.
+ * Examples(for PRETTY_UNITS_METRIC):
+ * '10M' => 10 000 000
+ * '10 M' => 10 000 000
+ * '10' => 10
+ * '10 Mx' => 10 000 000, prettyString == "x"
+ * 'abc' => throws std::range_error
+ */
+double prettyToDouble(
+    folly::StringPiece* const prettyString, const PrettyType type);
+
+/**
+ * Same as prettyToDouble(folly::StringPiece*, PrettyType), but
+ * expects whole string to be correctly parseable. Throws std::range_error
+ * otherwise
+ */
+double prettyToDouble(folly::StringPiece prettyString, const PrettyType type);
+
+/**
+ * @overloadbrief Write a hex dump of size bytes starting at ptr to out.
+ *
+ * The hex dump is formatted as follows:
+ *
+ * for the string "abcdefghijklmnopqrstuvwxyz\x02"
+00000000  61 62 63 64 65 66 67 68  69 6a 6b 6c 6d 6e 6f 70  |abcdefghijklmnop|
+00000010  71 72 73 74 75 76 77 78  79 7a 02                 |qrstuvwxyz.     |
+ *
+ * that is, we write 16 bytes per line, both as hex bytes and as printable
+ * characters.  Non-printable characters are replaced with '.'
+ * Lines are written to out one by one (one StringPiece at a time) without
+ * delimiters.
+ */
+template <class OutIt>
+void hexDump(const void* ptr, size_t size, OutIt out);
+
+/**
+ * Return the hex dump of size bytes starting at ptr as a string.
+ */
+std::string hexDump(const void* ptr, size_t size);
+
+/**
+ * Pretty print an errno.
+ *
+ * Return a string containing the description of the given errno value.
+ * Takes care not to overwrite the actual system errno, so calling
+ * errnoStr(errno) is valid.
+ */
+std::string errnoStr(int err);
+
+template <typename T, std::size_t M, typename P>
+class small_vector;
+
+template <typename T, typename Allocator>
+class fbvector;
+
+namespace detail {
+
+// We don't use SimdSplitByCharIsDefinedFor because
+// we would like the user to get an error where they could use SIMD
+// implementation but didn't use quite correct parameters.
+template <typename>
+struct IsSplitSupportedContainer : std::false_type {};
+
+template <typename T>
+using HasSimdSplitCompatibleValueType =
+    std::is_convertible<typename T::value_type, folly::StringPiece>;
+
+template <typename T, typename A>
+struct IsSplitSupportedContainer<std::vector<T, A>> : std::true_type {};
+
+template <typename T, typename A>
+struct IsSplitSupportedContainer<fbvector<T, A>> : std::true_type {};
+
+template <typename T, std::size_t M, typename P>
+struct IsSplitSupportedContainer<small_vector<T, M, P>> : std::true_type {};
+
+template <typename>
+struct IsSimdSupportedDelim : std::false_type {};
+
+template <>
+struct IsSimdSupportedDelim<char> : std::true_type {};
+
+} // namespace detail
+
+/**
+ * Split a string into a list of tokens by delimiter.
+ *
+ * The split interface here supports different output types, selected
+ * at compile time: StringPiece, fbstring, or std::string.  If you are
+ * using a vector to hold the output, it detects the type based on
+ * what your vector contains.  If the output vector is not empty, split
+ * will append to the end of the vector.
+ *
+ * You can also use splitTo() to write the output to an arbitrary
+ * OutputIterator (e.g. std::inserter() on a std::set<>), in which
+ * case you have to tell the function the type.  (Rationale:
+ * OutputIterators don't have a value_type, so we can't detect the
+ * type in splitTo without being told.)
+ *
+ * Examples:
+ *
+ *   std::vector<folly::StringPiece> v;
+ *   folly::split(':', "asd:bsd", v);
+ *
+ *   folly::small_vector<folly::StringPiece, 3> v;
+ *   folly::split(':', "asd:bsd:csd", v)
+ *
+ *   std::set<StringPiece> s;
+ *   folly::splitTo<StringPiece>("::", "asd::bsd::asd::csd",
+ *    std::inserter(s, s.begin()));
+ *
+ * Split also takes a flag (ignoreEmpty) that indicates whether adjacent
+ * delimiters should be treated as one single separator (ignoring empty tokens)
+ * or not (generating empty tokens).
+ */
+
+template <class Delim, class String, class OutputType>
+FOLLY_ALWAYS_INLINE std::enable_if_t<
+    detail::IsSimdSupportedDelim<Delim>::value &&
+    detail::HasSimdSplitCompatibleValueType<OutputType>::value &&
+    detail::IsSplitSupportedContainer<OutputType>::value>
+split(
+    const Delim& delimiter,
+    const String& input,
+    OutputType& out,
+    const bool ignoreEmpty = false) {
+  return detail::simdSplitByChar(delimiter, input, out, ignoreEmpty);
+}
+
+template <class Delim, class String, class OutputType>
+std::enable_if_t<
+    (!detail::IsSimdSupportedDelim<Delim>::value ||
+     !detail::HasSimdSplitCompatibleValueType<OutputType>::value) &&
+    detail::IsSplitSupportedContainer<OutputType>::value>
+split(
+    const Delim& delimiter,
+    const String& input,
+    OutputType& out,
+    const bool ignoreEmpty = false);
+
+/**
+ * split, to an output iterator
+ */
+template <
+    class OutputValueType,
+    class Delim,
+    class String,
+    class OutputIterator>
+void splitTo(
+    const Delim& delimiter,
+    const String& input,
+    OutputIterator out,
+    const bool ignoreEmpty = false);
+
+namespace detail {
+template <typename Void, typename OutputType>
+struct IsConvertible : std::false_type {};
+
+template <>
+struct IsConvertible<void, decltype(std::ignore)> : std::true_type {};
+
+template <typename OutputType>
+struct IsConvertible<
+    void_t<decltype(parseTo(StringPiece{}, std::declval<OutputType&>()))>,
+    OutputType> : std::true_type {};
+} // namespace detail
+template <typename OutputType>
+struct IsConvertible : detail::IsConvertible<void, OutputType> {};
+
+/**
+ * Split a string into a fixed number of string pieces and/or numeric types
+ * by delimiter. Conversions are supported for any type which folly:to<> can
+ * target, including all overloads of parseTo(). Returns 'true' if the fields
+ * were all successfully populated.  Returns 'false' if there were too few
+ * fields in the input, or too many fields if exact=true.  Casting exceptions
+ * will not be caught.
+ *
+ * Examples:
+ *
+ *  folly::StringPiece name, key, value;
+ *  if (folly::split('\t', line, name, key, value))
+ *    ...
+ *
+ *  folly::StringPiece name;
+ *  double value;
+ *  int id;
+ *  if (folly::split('\t', line, name, value, id))
+ *    ...
+ *
+ * The 'exact' template parameter specifies how the function behaves when too
+ * many fields are present in the input string. When 'exact' is set to its
+ * default value of 'true', a call to split will fail if the number of fields in
+ * the input string does not exactly match the number of output parameters
+ * passed. If 'exact' is overridden to 'false', all remaining fields will be
+ * stored, unsplit, in the last field, as shown below:
+ *
+ *  folly::StringPiece x, y.
+ *  if (folly::split<false>(':', "a:b:c", x, y))
+ *    assert(x == "a" && y == "b:c");
+ *
+ * Note that this will likely not work if the last field's target is of numeric
+ * type, in which case folly::to<> will throw an exception.
+ */
+template <bool exact = true, class Delim, class... OutputTypes>
+typename std::enable_if<
+    StrictConjunction<IsConvertible<OutputTypes>...>::value &&
+        sizeof...(OutputTypes) >= 1,
+    bool>::type
+split(const Delim& delimiter, StringPiece input, OutputTypes&... outputs);
+
+/**
+ * Join list of tokens.
+ *
+ * Stores a string representation of tokens in the same order with
+ * delimiter between each element.
+ */
+template <class Delim, class Iterator, class String>
+void join(const Delim& delimiter, Iterator begin, Iterator end, String& output);
+
+template <class Delim, class Container, class String>
+void join(const Delim& delimiter, const Container& container, String& output) {
+  join(delimiter, container.begin(), container.end(), output);
+}
+
+template <class Delim, class Value, class String>
+void join(
+    const Delim& delimiter,
+    const std::initializer_list<Value>& values,
+    String& output) {
+  join(delimiter, values.begin(), values.end(), output);
+}
+
+template <class Delim, class Container>
+std::string join(const Delim& delimiter, const Container& container) {
+  std::string output;
+  join(delimiter, container.begin(), container.end(), output);
+  return output;
+}
+
+template <class Delim, class Value>
+std::string join(
+    const Delim& delimiter, const std::initializer_list<Value>& values) {
+  std::string output;
+  join(delimiter, values.begin(), values.end(), output);
+  return output;
+}
+
+template <
+    class Delim,
+    class Iterator,
+    typename std::enable_if<std::is_base_of<
+        std::forward_iterator_tag,
+        typename std::iterator_traits<Iterator>::iterator_category>::value>::
+        type* = nullptr>
+std::string join(const Delim& delimiter, Iterator begin, Iterator end) {
+  std::string output;
+  join(delimiter, begin, end, output);
+  return output;
+}
+
+/**
+ * Remove leading whitespace.
+ *
+ * Returns a subpiece with all whitespace removed from the front of @sp.
+ * Whitespace means any of [' ', '\n', '\r', '\t'].
+ */
+StringPiece ltrimWhitespace(StringPiece sp);
+
+/**
+ * Remove trailing whitespace.
+ *
+ * Returns a subpiece with all whitespace removed from the back of @sp.
+ * Whitespace means any of [' ', '\n', '\r', '\t'].
+ */
+StringPiece rtrimWhitespace(StringPiece sp);
+
+/**
+ * Remove leading and trailing whitespace.
+ *
+ * Returns a subpiece with all whitespace removed from the back and front of
+ * @sp. Whitespace means any of [' ', '\n', '\r', '\t'].
+ */
+inline StringPiece trimWhitespace(StringPiece sp) {
+  return ltrimWhitespace(rtrimWhitespace(sp));
+}
+
+/**
+ * DEPRECATED: Use ltrimWhitespace instead
+ *
+ * Returns a subpiece with all whitespace removed from the front of @sp.
+ * Whitespace means any of [' ', '\n', '\r', '\t'].
+ */
+inline StringPiece skipWhitespace(StringPiece sp) {
+  return ltrimWhitespace(sp);
+}
+
+/**
+ * Specify characters to ltrim.
+ *
+ * Returns a subpiece with all characters the provided @toTrim returns true
+ * for removed from the front of @sp.
+ */
+template <typename ToTrim>
+StringPiece ltrim(StringPiece sp, ToTrim toTrim) {
+  while (!sp.empty() && toTrim(sp.front())) {
+    sp.pop_front();
+  }
+
+  return sp;
+}
+
+/**
+ * Specify characters to rtrim.
+ *
+ * Returns a subpiece with all characters the provided @toTrim returns true
+ * for removed from the back of @sp.
+ */
+template <typename ToTrim>
+StringPiece rtrim(StringPiece sp, ToTrim toTrim) {
+  while (!sp.empty() && toTrim(sp.back())) {
+    sp.pop_back();
+  }
+
+  return sp;
+}
+
+/**
+ * Specify characters to trim.
+ *
+ * Returns a subpiece with all characters the provided @toTrim returns true
+ * for removed from the back and front of @sp.
+ */
+template <typename ToTrim>
+StringPiece trim(StringPiece sp, ToTrim toTrim) {
+  return ltrim(rtrim(sp, std::ref(toTrim)), std::ref(toTrim));
+}
+
+/**
+ * De-indent a string.
+ *
+ * Strips the leading and the trailing whitespace-only lines. Then looks for
+ * the least indented non-whitespace-only line and removes its amount of
+ * leading whitespace from every line. Assumes leading whitespace is either all
+ * spaces or all tabs.
+ *
+ * Purpose: including a multiline string literal in source code, indented to
+ * the level expected from context.
+ */
+std::string stripLeftMargin(std::string s);
+
+/**
+ * Convert ascii to lowercase, in-place.
+ *
+ * Leaves all other characters unchanged, including those with the 0x80
+ * bit set.
+ * @param str String to convert
+ * @param length Length of str, in bytes
+ */
+void toLowerAscii(char* str, size_t length);
+
+inline void toLowerAscii(MutableStringPiece str) {
+  toLowerAscii(str.begin(), str.size());
+}
+
+inline void toLowerAscii(std::string& str) {
+  // str[0] is legal also if the string is empty.
+  toLowerAscii(&str[0], str.size());
+}
+
+/**
+ * Returns if string contains std::isspace or std::iscntrl characters.
+ **/
+inline bool hasSpaceOrCntrlSymbols(folly::StringPiece s) {
+  return detail::simdHasSpaceOrCntrlSymbols(s);
+}
+
+} // namespace folly
+
+#include <folly/String-inl.h>