react-native-quick-crypto 1.0.19 → 1.1.1

package/deps/simdutf/src/lasx/lasx_convert_utf16_to_utf8.cpp

@@ -0,0 +1,550 @@
+/*
+    The vectorized algorithm works on single LASX register i.e., it
+    loads eight 16-bit code units.
+
+    We consider three cases:
+    1. an input register contains no surrogates and each value
+       is in range 0x0000 .. 0x07ff.
+    2. an input register contains no surrogates and values are
+       is in range 0x0000 .. 0xffff.
+    3. an input register contains surrogates --- i.e. codepoints
+       can have 16 or 32 bits.
+
+    Ad 1.
+
+    When values are less than 0x0800, it means that a 16-bit code unit
+    can be converted into: 1) single UTF8 byte (when it's an ASCII
+    char) or 2) two UTF8 bytes.
+
+    For this case we do only some shuffle to obtain these 2-byte
+    codes and finally compress the whole LASX register with a single
+    shuffle.
+
+    We need 256-entry lookup table to get a compression pattern
+    and the number of output bytes in the compressed vector register.
+    Each entry occupies 17 bytes.
+
+    Ad 2.
+
+    When values fit in 16-bit code units, but are above 0x07ff, then
+    a single word may produce one, two or three UTF8 bytes.
+
+    We prepare data for all these three cases in two registers.
+    The first register contains lower two UTF8 bytes (used in all
+    cases), while the second one contains just the third byte for
+    the three-UTF8-bytes case.
+
+    Finally these two registers are interleaved forming eight-element
+    array of 32-bit values. The array spans two LASX registers.
+    The bytes from the registers are compressed using two shuffles.
+
+    We need 256-entry lookup table to get a compression pattern
+    and the number of output bytes in the compressed vector register.
+    Each entry occupies 17 bytes.
+
+
+    To summarize:
+    - We need two 256-entry tables that have 8704 bytes in total.
+*/
+/*
+  Returns a pair: the first unprocessed byte from buf and utf8_output
+  A scalar routing should carry on the conversion of the tail.
+*/
+
+template <endianness big_endian>
+std::pair<const char16_t *, char *>
+lasx_convert_utf16_to_utf8(const char16_t *buf, size_t len, char *utf8_out) {
+  uint8_t *utf8_output = reinterpret_cast<uint8_t *>(utf8_out);
+  const char16_t *end = buf + len;
+
+  const size_t safety_margin =
+      12; // to avoid overruns, see issue
+          // https://github.com/simdutf/simdutf/issues/92
+
+  __m256i v_07ff = __lasx_xvreplgr2vr_h(uint16_t(0x7ff));
+  __m256i zero = __lasx_xvldi(0);
+  __m128i zero_128 = __lsx_vldi(0);
+  while (end - buf >= std::ptrdiff_t(16 + safety_margin)) {
+    __m256i in = __lasx_xvld(reinterpret_cast<const uint16_t *>(buf), 0);
+    if simdutf_constexpr (!match_system(big_endian)) {
+      in = lasx_swap_bytes(in);
+    }
+    if (__lasx_xbnz_h(__lasx_xvslt_hu(
+            in, __lasx_xvrepli_h(0x7F)))) { // ASCII fast path!!!!
+      // 1. pack the bytes
+      __m256i utf8_packed =
+          __lasx_xvpermi_d(__lasx_xvpickev_b(in, in), 0b00001000);
+      // 2. store (16 bytes)
+      __lsx_vst(lasx_extracti128_lo(utf8_packed), utf8_output, 0);
+      // 3. adjust pointers
+      buf += 16;
+      utf8_output += 16;
+      continue; // we are done for this round!
+    }
+
+    if (__lasx_xbz_v(__lasx_xvslt_hu(v_07ff, in))) {
+      // 1. prepare 2-byte values
+      // input 16-bit word : [0000|0aaa|aabb|bbbb] x 16
+      // expected output   : [110a|aaaa|10bb|bbbb] x 16
+      // t0 = [000a|aaaa|bbbb|bb00]
+      __m256i t0 = __lasx_xvslli_h(in, 2);
+      // t1 = [000a|aaaa|0000|0000]
+      __m256i t1 = __lasx_xvand_v(t0, lasx_splat_u16(0x1f00));
+      // t2 = [0000|0000|00bb|bbbb]
+      __m256i t2 = __lasx_xvand_v(in, __lasx_xvrepli_h(0x3f));
+      // t3 = [000a|aaaa|00bb|bbbb]
+      __m256i t3 = __lasx_xvor_v(t1, t2);
+      // t4 = [110a|aaaa|10bb|bbbb]
+      __m256i v_c080 = __lasx_xvreplgr2vr_h(uint16_t(0xc080));
+      __m256i t4 = __lasx_xvor_v(t3, v_c080);
+      // 2. merge ASCII and 2-byte codewords
+      __m256i one_byte_bytemask =
+          __lasx_xvsle_hu(in, __lasx_xvrepli_h(0x7F /*0x007F*/));
+      __m256i utf8_unpacked = __lasx_xvbitsel_v(t4, in, one_byte_bytemask);
+      // 3. prepare bitmask for 8-bit lookup
+      __m256i mask = __lasx_xvmskltz_h(one_byte_bytemask);
+      uint32_t m1 = __lasx_xvpickve2gr_wu(mask, 0);
+      uint32_t m2 = __lasx_xvpickve2gr_wu(mask, 4);
+      // 4. pack the bytes
+      const uint8_t *row1 = &simdutf::tables::utf16_to_utf8::pack_1_2_utf8_bytes
+                                [lasx_1_2_utf8_bytes_mask[m1]][0];
+      __m128i shuffle1 = __lsx_vld(row1, 1);
+      __m128i utf8_packed1 =
+          __lsx_vshuf_b(zero_128, lasx_extracti128_lo(utf8_unpacked), shuffle1);
+
+      const uint8_t *row2 = &simdutf::tables::utf16_to_utf8::pack_1_2_utf8_bytes
+                                [lasx_1_2_utf8_bytes_mask[m2]][0];
+      __m128i shuffle2 = __lsx_vld(row2, 1);
+      __m128i utf8_packed2 =
+          __lsx_vshuf_b(zero_128, lasx_extracti128_hi(utf8_unpacked), shuffle2);
+      // 5. store bytes
+      __lsx_vst(utf8_packed1, utf8_output, 0);
+      utf8_output += row1[0];
+
+      __lsx_vst(utf8_packed2, utf8_output, 0);
+      utf8_output += row2[0];
+
+      buf += 16;
+      continue;
+    }
+    __m256i surrogates_bytemask = __lasx_xvseq_h(
+        __lasx_xvand_v(in, lasx_splat_u16(0xf800)), lasx_splat_u16(0xd800));
+    // It might seem like checking for surrogates_bitmask == 0xc000 could help.
+    // However, it is likely an uncommon occurrence.
+    if (__lasx_xbz_v(surrogates_bytemask)) {
+      // case: code units from register produce either 1, 2 or 3 UTF-8 bytes
+      /* In this branch we handle three cases:
+           1. [0000|0000|0ccc|cccc] => [0ccc|cccc]                           -
+         single UFT-8 byte
+           2. [0000|0bbb|bbcc|cccc] => [110b|bbbb], [10cc|cccc]              -
+         two UTF-8 bytes
+           3. [aaaa|bbbb|bbcc|cccc] => [1110|aaaa], [10bb|bbbb], [10cc|cccc] -
+         three UTF-8 bytes
+
+          We expand the input word (16-bit) into two code units (32-bit), thus
+          we have room for four bytes. However, we need five distinct bit
+          layouts. Note that the last byte in cases #2 and #3 is the same.
+
+          We precompute byte 1 for case #1 and the common byte for cases #2 & #3
+          in register t2.
+
+          We precompute byte 1 for case #3 and -- **conditionally** --
+         precompute either byte 1 for case #2 or byte 2 for case #3. Note that
+         they differ by exactly one bit.
+
+          Finally from these two code units we build proper UTF-8 sequence,
+         taking into account the case (i.e, the number of bytes to write).
+        */
+      /**
+       * Given [aaaa|bbbb|bbcc|cccc] our goal is to produce:
+       * t2 => [0ccc|cccc] [10cc|cccc]
+       * s4 => [1110|aaaa] ([110b|bbbb] OR [10bb|bbbb])
+       */
+      // [aaaa|bbbb|bbcc|cccc] => [bbcc|cccc|bbcc|cccc]
+      __m256i t0 = __lasx_xvpickev_b(in, in);
+      t0 = __lasx_xvilvl_b(t0, t0);
+
+      // [bbcc|cccc|bbcc|cccc] => [00cc|cccc|00cc|cccc]
+      __m256i v_3f7f = __lasx_xvreplgr2vr_h(uint16_t(0x3F7F));
+      __m256i t1 = __lasx_xvand_v(t0, v_3f7f);
+      // [00cc|cccc|0bcc|cccc] => [10cc|cccc|0bcc|cccc]
+      __m256i t2 = __lasx_xvor_v(t1, lasx_splat_u16(0x8000));
+
+      // s0: [aaaa|bbbb|bbcc|cccc] => [0000|0000|0000|aaaa]
+      __m256i s0 = __lasx_xvsrli_h(in, 12);
+      // s1: [aaaa|bbbb|bbcc|cccc] => [0000|bbbb|bb00|0000]
+      __m256i s1 = __lasx_xvslli_h(in, 2);
+      // s1: [aabb|bbbb|cccc|cc00] => [00bb|bbbb|0000|0000]
+      s1 = __lasx_xvand_v(s1, lasx_splat_u16(0x3f00));
+
+      // [00bb|bbbb|0000|aaaa]
+      __m256i s2 = __lasx_xvor_v(s0, s1);
+      // s3: [00bb|bbbb|0000|aaaa] => [11bb|bbbb|1110|aaaa]
+      __m256i v_c0e0 = __lasx_xvreplgr2vr_h(uint16_t(0xC0E0));
+      __m256i s3 = __lasx_xvor_v(s2, v_c0e0);
+      __m256i one_or_two_bytes_bytemask = __lasx_xvsle_hu(in, v_07ff);
+      __m256i m0 =
+          __lasx_xvandn_v(one_or_two_bytes_bytemask, lasx_splat_u16(0x4000));
+      __m256i s4 = __lasx_xvxor_v(s3, m0);
+
+      // 4. expand code units 16-bit => 32-bit
+      __m256i out0 = __lasx_xvilvl_h(s4, t2);
+      __m256i out1 = __lasx_xvilvh_h(s4, t2);
+
+      // 5. compress 32-bit code units into 1, 2 or 3 bytes -- 2 x shuffle
+      __m256i one_byte_bytemask = __lasx_xvsle_hu(in, __lasx_xvrepli_h(0x7F));
+      __m256i one_byte_bytemask_low =
+          __lasx_xvilvl_h(one_byte_bytemask, one_byte_bytemask);
+      __m256i one_byte_bytemask_high =
+          __lasx_xvilvh_h(one_byte_bytemask, one_byte_bytemask);
+
+      __m256i one_or_two_bytes_bytemask_low =
+          __lasx_xvilvl_h(one_or_two_bytes_bytemask, zero);
+      __m256i one_or_two_bytes_bytemask_high =
+          __lasx_xvilvh_h(one_or_two_bytes_bytemask, zero);
+
+      __m256i mask0 = __lasx_xvmskltz_h(
+          __lasx_xvor_v(one_or_two_bytes_bytemask_low, one_byte_bytemask_low));
+      __m256i mask1 = __lasx_xvmskltz_h(__lasx_xvor_v(
+          one_or_two_bytes_bytemask_high, one_byte_bytemask_high));
+
+      uint32_t mask = __lasx_xvpickve2gr_wu(mask0, 0);
+      const uint8_t *row0 =
+          &simdutf::tables::utf16_to_utf8::pack_1_2_3_utf8_bytes[mask & 0xFF]
+                                                                [0];
+      __m128i shuffle0 = __lsx_vld(row0, 1);
+      __m128i utf8_0 =
+          __lsx_vshuf_b(zero_128, lasx_extracti128_lo(out0), shuffle0);
+      __lsx_vst(utf8_0, utf8_output, 0);
+      utf8_output += row0[0];
+
+      mask = __lasx_xvpickve2gr_wu(mask1, 0);
+      const uint8_t *row1 =
+          &simdutf::tables::utf16_to_utf8::pack_1_2_3_utf8_bytes[mask & 0xFF]
+                                                                [0];
+      __m128i shuffle1 = __lsx_vld(row1, 1);
+      __m128i utf8_1 =
+          __lsx_vshuf_b(zero_128, lasx_extracti128_lo(out1), shuffle1);
+      __lsx_vst(utf8_1, utf8_output, 0);
+      utf8_output += row1[0];
+
+      mask = __lasx_xvpickve2gr_wu(mask0, 4);
+      const uint8_t *row2 =
+          &simdutf::tables::utf16_to_utf8::pack_1_2_3_utf8_bytes[mask & 0xFF]
+                                                                [0];
+      __m128i shuffle2 = __lsx_vld(row2, 1);
+      __m128i utf8_2 =
+          __lsx_vshuf_b(zero_128, lasx_extracti128_hi(out0), shuffle2);
+      __lsx_vst(utf8_2, utf8_output, 0);
+      utf8_output += row2[0];
+
+      mask = __lasx_xvpickve2gr_wu(mask1, 4);
+      const uint8_t *row3 =
+          &simdutf::tables::utf16_to_utf8::pack_1_2_3_utf8_bytes[mask & 0xFF]
+                                                                [0];
+      __m128i shuffle3 = __lsx_vld(row3, 1);
+      __m128i utf8_3 =
+          __lsx_vshuf_b(zero_128, lasx_extracti128_hi(out1), shuffle3);
+      __lsx_vst(utf8_3, utf8_output, 0);
+      utf8_output += row3[0];
+
+      buf += 16;
+      // surrogate pair(s) in a register
+    } else {
+      // Let us do a scalar fallback.
+      // It may seem wasteful to use scalar code, but being efficient with SIMD
+      // in the presence of surrogate pairs may require non-trivial tables.
+      size_t forward = 15;
+      size_t k = 0;
+      if (size_t(end - buf) < forward + 1) {
+        forward = size_t(end - buf - 1);
+      }
+      for (; k < forward; k++) {
+        uint16_t word = scalar::utf16::swap_if_needed<big_endian>(buf[k]);
+        if ((word & 0xFF80) == 0) {
+          *utf8_output++ = char(word);
+        } else if ((word & 0xF800) == 0) {
+          *utf8_output++ = char((word >> 6) | 0b11000000);
+          *utf8_output++ = char((word & 0b111111) | 0b10000000);
+        } else if ((word & 0xF800) != 0xD800) {
+          *utf8_output++ = char((word >> 12) | 0b11100000);
+          *utf8_output++ = char(((word >> 6) & 0b111111) | 0b10000000);
+          *utf8_output++ = char((word & 0b111111) | 0b10000000);
+        } else {
+          // must be a surrogate pair
+          uint16_t diff = uint16_t(word - 0xD800);
+          uint16_t next_word =
+              scalar::utf16::swap_if_needed<big_endian>(buf[k + 1]);
+          k++;
+          uint16_t diff2 = uint16_t(next_word - 0xDC00);
+          if ((diff | diff2) > 0x3FF) {
+            return std::make_pair(nullptr,
+                                  reinterpret_cast<char *>(utf8_output));
+          }
+          uint32_t value = (diff << 10) + diff2 + 0x10000;
+          *utf8_output++ = char((value >> 18) | 0b11110000);
+          *utf8_output++ = char(((value >> 12) & 0b111111) | 0b10000000);
+          *utf8_output++ = char(((value >> 6) & 0b111111) | 0b10000000);
+          *utf8_output++ = char((value & 0b111111) | 0b10000000);
+        }
+      }
+      buf += k;
+    }
+  } // while
+  return std::make_pair(buf, reinterpret_cast<char *>(utf8_output));
+}
+
+/*
+  Returns a pair: a result struct and utf8_output.
+  If there is an error, the count field of the result is the position of the
+  error. Otherwise, it is the position of the first unprocessed byte in buf
+  (even if finished). A scalar routing should carry on the conversion of the
+  tail if needed.
+*/
+template <endianness big_endian>
+std::pair<result, char *>
+lasx_convert_utf16_to_utf8_with_errors(const char16_t *buf, size_t len,
+                                       char *utf8_out) {
+  uint8_t *utf8_output = reinterpret_cast<uint8_t *>(utf8_out);
+  const char16_t *start = buf;
+  const char16_t *end = buf + len;
+
+  const size_t safety_margin =
+      12; // to avoid overruns, see issue
+          // https://github.com/simdutf/simdutf/issues/92
+
+  __m256i v_07ff = __lasx_xvreplgr2vr_h(uint16_t(0x7ff));
+  __m256i zero = __lasx_xvldi(0);
+  __m128i zero_128 = __lsx_vldi(0);
+  while (end - buf >= std::ptrdiff_t(16 + safety_margin)) {
+    __m256i in = __lasx_xvld(reinterpret_cast<const uint16_t *>(buf), 0);
+    if simdutf_constexpr (!match_system(big_endian)) {
+      in = lasx_swap_bytes(in);
+    }
+    if (__lasx_xbnz_h(__lasx_xvslt_hu(
+            in, __lasx_xvrepli_h(0x7F)))) { // ASCII fast path!!!!
+      // 1. pack the bytes
+      __m256i utf8_packed =
+          __lasx_xvpermi_d(__lasx_xvpickev_b(in, in), 0b00001000);
+      // 2. store (16 bytes)
+      __lsx_vst(lasx_extracti128_lo(utf8_packed), utf8_output, 0);
+      // 3. adjust pointers
+      buf += 16;
+      utf8_output += 16;
+      continue; // we are done for this round!
+    }
+
+    if (__lasx_xbz_v(__lasx_xvslt_hu(v_07ff, in))) {
+      // 1. prepare 2-byte values
+      // input 16-bit word : [0000|0aaa|aabb|bbbb] x 16
+      // expected output   : [110a|aaaa|10bb|bbbb] x 16
+      // t0 = [000a|aaaa|bbbb|bb00]
+      __m256i t0 = __lasx_xvslli_h(in, 2);
+      // t1 = [000a|aaaa|0000|0000]
+      __m256i t1 = __lasx_xvand_v(t0, lasx_splat_u16(0x1f00));
+      // t2 = [0000|0000|00bb|bbbb]
+      __m256i t2 = __lasx_xvand_v(in, __lasx_xvrepli_h(0x3f));
+      // t3 = [000a|aaaa|00bb|bbbb]
+      __m256i t3 = __lasx_xvor_v(t1, t2);
+      // t4 = [110a|aaaa|10bb|bbbb]
+      __m256i v_c080 = __lasx_xvreplgr2vr_h(uint16_t(0xc080));
+      __m256i t4 = __lasx_xvor_v(t3, v_c080);
+      // 2. merge ASCII and 2-byte codewords
+      __m256i one_byte_bytemask =
+          __lasx_xvsle_hu(in, __lasx_xvrepli_h(0x7F /*0x007F*/));
+      __m256i utf8_unpacked = __lasx_xvbitsel_v(t4, in, one_byte_bytemask);
+      // 3. prepare bitmask for 8-bit lookup
+      __m256i mask = __lasx_xvmskltz_h(one_byte_bytemask);
+      uint32_t m1 = __lasx_xvpickve2gr_wu(mask, 0);
+      uint32_t m2 = __lasx_xvpickve2gr_wu(mask, 4);
+      // 4. pack the bytes
+      const uint8_t *row1 = &simdutf::tables::utf16_to_utf8::pack_1_2_utf8_bytes
+                                [lasx_1_2_utf8_bytes_mask[m1]][0];
+      __m128i shuffle1 = __lsx_vld(row1, 1);
+      __m128i utf8_packed1 =
+          __lsx_vshuf_b(zero_128, lasx_extracti128_lo(utf8_unpacked), shuffle1);
+
+      const uint8_t *row2 = &simdutf::tables::utf16_to_utf8::pack_1_2_utf8_bytes
+                                [lasx_1_2_utf8_bytes_mask[m2]][0];
+      __m128i shuffle2 = __lsx_vld(row2, 1);
+      __m128i utf8_packed2 =
+          __lsx_vshuf_b(zero_128, lasx_extracti128_hi(utf8_unpacked), shuffle2);
+      // 5. store bytes
+      __lsx_vst(utf8_packed1, utf8_output, 0);
+      utf8_output += row1[0];
+
+      __lsx_vst(utf8_packed2, utf8_output, 0);
+      utf8_output += row2[0];
+
+      buf += 16;
+      continue;
+    }
+    __m256i surrogates_bytemask = __lasx_xvseq_h(
+        __lasx_xvand_v(in, lasx_splat_u16(0xf800)), lasx_splat_u16(0xd800));
+    // It might seem like checking for surrogates_bitmask == 0xc000 could help.
+    // However, it is likely an uncommon occurrence.
+    if (__lasx_xbz_v(surrogates_bytemask)) {
+      // case: code units from register produce either 1, 2 or 3 UTF-8 bytes
+      /* In this branch we handle three cases:
+           1. [0000|0000|0ccc|cccc] => [0ccc|cccc]                           -
+         single UFT-8 byte
+           2. [0000|0bbb|bbcc|cccc] => [110b|bbbb], [10cc|cccc]              -
+         two UTF-8 bytes
+           3. [aaaa|bbbb|bbcc|cccc] => [1110|aaaa], [10bb|bbbb], [10cc|cccc] -
+         three UTF-8 bytes
+
+          We expand the input word (16-bit) into two code units (32-bit), thus
+          we have room for four bytes. However, we need five distinct bit
+          layouts. Note that the last byte in cases #2 and #3 is the same.
+
+          We precompute byte 1 for case #1 and the common byte for cases #2 & #3
+          in register t2.
+
+          We precompute byte 1 for case #3 and -- **conditionally** --
+         precompute either byte 1 for case #2 or byte 2 for case #3. Note that
+         they differ by exactly one bit.
+
+          Finally from these two code units we build proper UTF-8 sequence,
+         taking into account the case (i.e, the number of bytes to write).
+        */
+      /**
+       * Given [aaaa|bbbb|bbcc|cccc] our goal is to produce:
+       * t2 => [0ccc|cccc] [10cc|cccc]
+       * s4 => [1110|aaaa] ([110b|bbbb] OR [10bb|bbbb])
+       */
+      // [aaaa|bbbb|bbcc|cccc] => [bbcc|cccc|bbcc|cccc]
+      __m256i t0 = __lasx_xvpickev_b(in, in);
+      t0 = __lasx_xvilvl_b(t0, t0);
+
+      // [bbcc|cccc|bbcc|cccc] => [00cc|cccc|00cc|cccc]
+      __m256i v_3f7f = __lasx_xvreplgr2vr_h(uint16_t(0x3F7F));
+      __m256i t1 = __lasx_xvand_v(t0, v_3f7f);
+      // [00cc|cccc|0bcc|cccc] => [10cc|cccc|0bcc|cccc]
+      __m256i t2 = __lasx_xvor_v(t1, lasx_splat_u16(0x8000));
+
+      // s0: [aaaa|bbbb|bbcc|cccc] => [0000|0000|0000|aaaa]
+      __m256i s0 = __lasx_xvsrli_h(in, 12);
+      // s1: [aaaa|bbbb|bbcc|cccc] => [0000|bbbb|bb00|0000]
+      __m256i s1 = __lasx_xvslli_h(in, 2);
+      // s1: [aabb|bbbb|cccc|cc00] => [00bb|bbbb|0000|0000]
+      s1 = __lasx_xvand_v(s1, lasx_splat_u16(0x3f00));
+
+      // [00bb|bbbb|0000|aaaa]
+      __m256i s2 = __lasx_xvor_v(s0, s1);
+      // s3: [00bb|bbbb|0000|aaaa] => [11bb|bbbb|1110|aaaa]
+      __m256i v_c0e0 = __lasx_xvreplgr2vr_h(uint16_t(0xC0E0));
+      __m256i s3 = __lasx_xvor_v(s2, v_c0e0);
+      __m256i one_or_two_bytes_bytemask = __lasx_xvsle_hu(in, v_07ff);
+      __m256i m0 =
+          __lasx_xvandn_v(one_or_two_bytes_bytemask, lasx_splat_u16(0x4000));
+      __m256i s4 = __lasx_xvxor_v(s3, m0);
+
+      // 4. expand code units 16-bit => 32-bit
+      __m256i out0 = __lasx_xvilvl_h(s4, t2);
+      __m256i out1 = __lasx_xvilvh_h(s4, t2);
+
+      // 5. compress 32-bit code units into 1, 2 or 3 bytes -- 2 x shuffle
+      __m256i one_byte_bytemask = __lasx_xvsle_hu(in, __lasx_xvrepli_h(0x7F));
+      __m256i one_byte_bytemask_low =
+          __lasx_xvilvl_h(one_byte_bytemask, one_byte_bytemask);
+      __m256i one_byte_bytemask_high =
+          __lasx_xvilvh_h(one_byte_bytemask, one_byte_bytemask);
+
+      __m256i one_or_two_bytes_bytemask_low =
+          __lasx_xvilvl_h(one_or_two_bytes_bytemask, zero);
+      __m256i one_or_two_bytes_bytemask_high =
+          __lasx_xvilvh_h(one_or_two_bytes_bytemask, zero);
+
+      __m256i mask0 = __lasx_xvmskltz_h(
+          __lasx_xvor_v(one_or_two_bytes_bytemask_low, one_byte_bytemask_low));
+      __m256i mask1 = __lasx_xvmskltz_h(__lasx_xvor_v(
+          one_or_two_bytes_bytemask_high, one_byte_bytemask_high));
+
+      uint32_t mask = __lasx_xvpickve2gr_wu(mask0, 0);
+      const uint8_t *row0 =
+          &simdutf::tables::utf16_to_utf8::pack_1_2_3_utf8_bytes[mask & 0xFF]
+                                                                [0];
+      __m128i shuffle0 = __lsx_vld(row0, 1);
+      __m128i utf8_0 =
+          __lsx_vshuf_b(zero_128, lasx_extracti128_lo(out0), shuffle0);
+      __lsx_vst(utf8_0, utf8_output, 0);
+      utf8_output += row0[0];
+
+      mask = __lasx_xvpickve2gr_wu(mask1, 0);
+      const uint8_t *row1 =
+          &simdutf::tables::utf16_to_utf8::pack_1_2_3_utf8_bytes[mask & 0xFF]
+                                                                [0];
+      __m128i shuffle1 = __lsx_vld(row1, 1);
+      __m128i utf8_1 =
+          __lsx_vshuf_b(zero_128, lasx_extracti128_lo(out1), shuffle1);
+      __lsx_vst(utf8_1, utf8_output, 0);
+      utf8_output += row1[0];
+
+      mask = __lasx_xvpickve2gr_wu(mask0, 4);
+      const uint8_t *row2 =
+          &simdutf::tables::utf16_to_utf8::pack_1_2_3_utf8_bytes[mask & 0xFF]
+                                                                [0];
+      __m128i shuffle2 = __lsx_vld(row2, 1);
+      __m128i utf8_2 =
+          __lsx_vshuf_b(zero_128, lasx_extracti128_hi(out0), shuffle2);
+      __lsx_vst(utf8_2, utf8_output, 0);
+      utf8_output += row2[0];
+
+      mask = __lasx_xvpickve2gr_wu(mask1, 4);
+      const uint8_t *row3 =
+          &simdutf::tables::utf16_to_utf8::pack_1_2_3_utf8_bytes[mask & 0xFF]
+                                                                [0];
+      __m128i shuffle3 = __lsx_vld(row3, 1);
+      __m128i utf8_3 =
+          __lsx_vshuf_b(zero_128, lasx_extracti128_hi(out1), shuffle3);
+      __lsx_vst(utf8_3, utf8_output, 0);
+      utf8_output += row3[0];
+
+      buf += 16;
+      // surrogate pair(s) in a register
+    } else {
+      // Let us do a scalar fallback.
+      // It may seem wasteful to use scalar code, but being efficient with SIMD
+      // in the presence of surrogate pairs may require non-trivial tables.
+      size_t forward = 15;
+      size_t k = 0;
+      if (size_t(end - buf) < forward + 1) {
+        forward = size_t(end - buf - 1);
+      }
+      for (; k < forward; k++) {
+        uint16_t word = scalar::utf16::swap_if_needed<big_endian>(buf[k]);
+        if ((word & 0xFF80) == 0) {
+          *utf8_output++ = char(word);
+        } else if ((word & 0xF800) == 0) {
+          *utf8_output++ = char((word >> 6) | 0b11000000);
+          *utf8_output++ = char((word & 0b111111) | 0b10000000);
+        } else if ((word & 0xF800) != 0xD800) {
+          *utf8_output++ = char((word >> 12) | 0b11100000);
+          *utf8_output++ = char(((word >> 6) & 0b111111) | 0b10000000);
+          *utf8_output++ = char((word & 0b111111) | 0b10000000);
+        } else {
+          // must be a surrogate pair
+          uint16_t diff = uint16_t(word - 0xD800);
+          uint16_t next_word =
+              scalar::utf16::swap_if_needed<big_endian>(buf[k + 1]);
+          k++;
+          uint16_t diff2 = uint16_t(next_word - 0xDC00);
+          if ((diff | diff2) > 0x3FF) {
+            return std::make_pair(
+                result(error_code::SURROGATE, buf - start + k - 1),
+                reinterpret_cast<char *>(utf8_output));
+          }
+          uint32_t value = (diff << 10) + diff2 + 0x10000;
+          *utf8_output++ = char((value >> 18) | 0b11110000);
+          *utf8_output++ = char(((value >> 12) & 0b111111) | 0b10000000);
+          *utf8_output++ = char(((value >> 6) & 0b111111) | 0b10000000);
+          *utf8_output++ = char((value & 0b111111) | 0b10000000);
+        }
+      }
+      buf += k;
+    }
+  } // while
+
+  return std::make_pair(result(error_code::SUCCESS, buf - start),
+                        reinterpret_cast<char *>(utf8_output));
+}

package/deps/simdutf/src/lasx/lasx_convert_utf32_to_latin1.cpp

@@ -0,0 +1,73 @@
+std::pair<const char32_t *, char *>
+lasx_convert_utf32_to_latin1(const char32_t *buf, size_t len,
+                             char *latin1_output) {
+  const char32_t *end = buf + len;
+  const __m256i shuf_mask = ____m256i(
+      (__m128i)v16u8{0, 4, 8, 12, 16, 20, 24, 28, 0, 0, 0, 0, 0, 0, 0, 0});
+  __m256i v_ff = __lasx_xvrepli_w(0xFF);
+
+  while (end - buf >= 16) {
+    __m256i in1 = __lasx_xvld(reinterpret_cast<const uint32_t *>(buf), 0);
+    __m256i in2 = __lasx_xvld(reinterpret_cast<const uint32_t *>(buf), 32);
+
+    __m256i in12 = __lasx_xvor_v(in1, in2);
+    if (__lasx_xbz_v(__lasx_xvslt_wu(v_ff, in12))) {
+      // 1. pack the bytes
+      __m256i latin1_packed_tmp = __lasx_xvshuf_b(in2, in1, shuf_mask);
+      latin1_packed_tmp = __lasx_xvpermi_d(latin1_packed_tmp, 0b00001000);
+      __m128i latin1_packed = lasx_extracti128_lo(latin1_packed_tmp);
+      latin1_packed = __lsx_vpermi_w(latin1_packed, latin1_packed, 0b11011000);
+      // 2. store (8 bytes)
+      __lsx_vst(latin1_packed, reinterpret_cast<uint8_t *>(latin1_output), 0);
+      // 3. adjust pointers
+      buf += 16;
+      latin1_output += 16;
+    } else {
+      return std::make_pair(nullptr, reinterpret_cast<char *>(latin1_output));
+    }
+  } // while
+  return std::make_pair(buf, latin1_output);
+}
+
+std::pair<result, char *>
+lasx_convert_utf32_to_latin1_with_errors(const char32_t *buf, size_t len,
+                                         char *latin1_output) {
+  const char32_t *start = buf;
+  const char32_t *end = buf + len;
+
+  const __m256i shuf_mask = ____m256i(
+      (__m128i)v16u8{0, 4, 8, 12, 16, 20, 24, 28, 0, 0, 0, 0, 0, 0, 0, 0});
+  __m256i v_ff = __lasx_xvrepli_w(0xFF);
+
+  while (end - buf >= 16) {
+    __m256i in1 = __lasx_xvld(reinterpret_cast<const uint32_t *>(buf), 0);
+    __m256i in2 = __lasx_xvld(reinterpret_cast<const uint32_t *>(buf), 32);
+
+    __m256i in12 = __lasx_xvor_v(in1, in2);
+    if (__lasx_xbz_v(__lasx_xvslt_wu(v_ff, in12))) {
+      // 1. pack the bytes
+      __m256i latin1_packed_tmp = __lasx_xvshuf_b(in2, in1, shuf_mask);
+      latin1_packed_tmp = __lasx_xvpermi_d(latin1_packed_tmp, 0b00001000);
+      __m128i latin1_packed = lasx_extracti128_lo(latin1_packed_tmp);
+      latin1_packed = __lsx_vpermi_w(latin1_packed, latin1_packed, 0b11011000);
+      // 2. store (8 bytes)
+      __lsx_vst(latin1_packed, reinterpret_cast<uint8_t *>(latin1_output), 0);
+      // 3. adjust pointers
+      buf += 16;
+      latin1_output += 16;
+    } else {
+      // Let us do a scalar fallback.
+      for (int k = 0; k < 16; k++) {
+        uint32_t word = buf[k];
+        if (word <= 0xff) {
+          *latin1_output++ = char(word);
+        } else {
+          return std::make_pair(result(error_code::TOO_LARGE, buf - start + k),
+                                latin1_output);
+        }
+      }
+    }
+  } // while
+  return std::make_pair(result(error_code::SUCCESS, buf - start),
+                        latin1_output);
+}