ps-toolkit-ui 0.0.211 → 0.0.215

package/src/assets/plugins/highcharts/code/es-modules/Extensions/Polar.js

@@ -1,740 +0,0 @@
-/* *
- *
- *  (c) 2010-2021 Torstein Honsi
- *
- *  License: www.highcharts.com/license
- *
- *  !!!!!!! SOURCE GETS TRANSPILED BY TYPESCRIPT. EDIT TS FILE ONLY. !!!!!!!
- *
- * */
-'use strict';
-import A from '../Core/Animation/AnimationUtilities.js';
-var animObject = A.animObject;
-import Chart from '../Core/Chart/Chart.js';
-import H from '../Core/Globals.js';
-import Pane from './Pane.js';
-import Pointer from '../Core/Pointer.js';
-import Series from '../Core/Series/Series.js';
-import SeriesRegistry from '../Core/Series/SeriesRegistry.js';
-var seriesTypes = SeriesRegistry.seriesTypes;
-import SVGRenderer from '../Core/Renderer/SVG/SVGRenderer.js';
-import U from '../Core/Utilities.js';
-var addEvent = U.addEvent, defined = U.defined, find = U.find, isNumber = U.isNumber, pick = U.pick, splat = U.splat, uniqueKey = U.uniqueKey, wrap = U.wrap;
-// Extensions for polar charts. Additionally, much of the geometry required for
-// polar charts is gathered in RadialAxes.js.
-var seriesProto = Series.prototype, pointerProto = Pointer.prototype, columnProto, arearangeProto;
-/* eslint-disable no-invalid-this, valid-jsdoc */
-/**
- * Search a k-d tree by the point angle, used for shared tooltips in polar
- * charts
- * @private
- */
-seriesProto.searchPointByAngle = function (e) {
-    var series = this, chart = series.chart, xAxis = series.xAxis, center = xAxis.pane.center, plotX = e.chartX - center[0] - chart.plotLeft, plotY = e.chartY - center[1] - chart.plotTop;
-    return this.searchKDTree({
-        clientX: 180 + (Math.atan2(plotX, plotY) * (-180 / Math.PI))
-    });
-};
-/**
- * #6212 Calculate connectors for spline series in polar chart.
- * @private
- * @param {boolean} calculateNeighbours
- *        Check if connectors should be calculated for neighbour points as
- *        well allows short recurence
- */
-seriesProto.getConnectors = function (segment, index, calculateNeighbours, connectEnds) {
-    var i, prevPointInd, nextPointInd, previousPoint, nextPoint, previousX, previousY, nextX, nextY, plotX, plotY, ret, 
-    // 1 means control points midway between points, 2 means 1/3 from
-    // the point, 3 is 1/4 etc;
-    smoothing = 1.5, denom = smoothing + 1, leftContX, leftContY, rightContX, rightContY, dLControlPoint, // distance left control point
-    dRControlPoint, leftContAngle, rightContAngle, jointAngle, addedNumber = connectEnds ? 1 : 0;
-    // Calculate final index of points depending on the initial index value.
-    // Because of calculating neighbours, index may be outisde segment
-    // array.
-    if (index >= 0 && index <= segment.length - 1) {
-        i = index;
-    }
-    else if (index < 0) {
-        i = segment.length - 1 + index;
-    }
-    else {
-        i = 0;
-    }
-    prevPointInd = (i - 1 < 0) ? segment.length - (1 + addedNumber) : i - 1;
-    nextPointInd = (i + 1 > segment.length - 1) ? addedNumber : i + 1;
-    previousPoint = segment[prevPointInd];
-    nextPoint = segment[nextPointInd];
-    previousX = previousPoint.plotX;
-    previousY = previousPoint.plotY;
-    nextX = nextPoint.plotX;
-    nextY = nextPoint.plotY;
-    plotX = segment[i].plotX; // actual point
-    plotY = segment[i].plotY;
-    leftContX = (smoothing * plotX + previousX) / denom;
-    leftContY = (smoothing * plotY + previousY) / denom;
-    rightContX = (smoothing * plotX + nextX) / denom;
-    rightContY = (smoothing * plotY + nextY) / denom;
-    dLControlPoint = Math.sqrt(Math.pow(leftContX - plotX, 2) + Math.pow(leftContY - plotY, 2));
-    dRControlPoint = Math.sqrt(Math.pow(rightContX - plotX, 2) + Math.pow(rightContY - plotY, 2));
-    leftContAngle = Math.atan2(leftContY - plotY, leftContX - plotX);
-    rightContAngle = Math.atan2(rightContY - plotY, rightContX - plotX);
-    jointAngle = (Math.PI / 2) + ((leftContAngle + rightContAngle) / 2);
-    // Ensure the right direction, jointAngle should be in the same quadrant
-    // as leftContAngle
-    if (Math.abs(leftContAngle - jointAngle) > Math.PI / 2) {
-        jointAngle -= Math.PI;
-    }
-    // Find the corrected control points for a spline straight through the
-    // point
-    leftContX = plotX + Math.cos(jointAngle) * dLControlPoint;
-    leftContY = plotY + Math.sin(jointAngle) * dLControlPoint;
-    rightContX = plotX + Math.cos(Math.PI + jointAngle) * dRControlPoint;
-    rightContY = plotY + Math.sin(Math.PI + jointAngle) * dRControlPoint;
-    // push current point's connectors into returned object
-    ret = {
-        rightContX: rightContX,
-        rightContY: rightContY,
-        leftContX: leftContX,
-        leftContY: leftContY,
-        plotX: plotX,
-        plotY: plotY
-    };
-    // calculate connectors for previous and next point and push them inside
-    // returned object
-    if (calculateNeighbours) {
-        ret.prevPointCont = this.getConnectors(segment, prevPointInd, false, connectEnds);
-    }
-    return ret;
-};
-/**
- * Translate a point's plotX and plotY from the internal angle and radius
- * measures to true plotX, plotY coordinates
- * @private
- */
-seriesProto.toXY = function (point) {
-    var chart = this.chart, xAxis = this.xAxis, yAxis = this.yAxis, plotX = point.plotX, plotY = point.plotY, series = point.series, inverted = chart.inverted, pointY = point.y, radius = inverted ? plotX : yAxis.len - plotY, clientX;
-    // Corrected y position of inverted series other than column
-    if (inverted && series && !series.isRadialBar) {
-        point.plotY = plotY =
-            typeof pointY === 'number' ? (yAxis.translate(pointY) || 0) : 0;
-    }
-    // Save rectangular plotX, plotY for later computation
-    point.rectPlotX = plotX;
-    point.rectPlotY = plotY;
-    if (yAxis.center) {
-        radius += yAxis.center[3] / 2;
-    }
-    // Find the polar plotX and plotY. Avoid setting plotX and plotY to NaN when
-    // plotY is undefined (#15438)
-    if (isNumber(plotY)) {
-        var xy = inverted ? yAxis.postTranslate(plotY, radius) :
-            xAxis.postTranslate(plotX, radius);
-        point.plotX = point.polarPlotX = xy.x - chart.plotLeft;
-        point.plotY = point.polarPlotY = xy.y - chart.plotTop;
-    }
-    // If shared tooltip, record the angle in degrees in order to align X
-    // points. Otherwise, use a standard k-d tree to get the nearest point
-    // in two dimensions.
-    if (this.kdByAngle) {
-        clientX = ((plotX / Math.PI * 180) +
-            xAxis.pane.options.startAngle) % 360;
-        if (clientX < 0) { // #2665
-            clientX += 360;
-        }
-        point.clientX = clientX;
-    }
-    else {
-        point.clientX = point.plotX;
-    }
-};
-if (seriesTypes.spline) {
-    /**
-     * Overridden method for calculating a spline from one point to the next
-     * @private
-     */
-    wrap(seriesTypes.spline.prototype, 'getPointSpline', function (proceed, segment, point, i) {
-        var ret, connectors;
-        if (this.chart.polar) {
-            // moveTo or lineTo
-            if (!i) {
-                ret = ['M', point.plotX, point.plotY];
-            }
-            else { // curve from last point to this
-                connectors = this.getConnectors(segment, i, true, this.connectEnds);
-                var rightContX = connectors.prevPointCont &&
-                    connectors.prevPointCont.rightContX;
-                var rightContY = connectors.prevPointCont &&
-                    connectors.prevPointCont.rightContY;
-                ret = [
-                    'C',
-                    isNumber(rightContX) ? rightContX : connectors.plotX,
-                    isNumber(rightContY) ? rightContY : connectors.plotY,
-                    isNumber(connectors.leftContX) ?
-                        connectors.leftContX :
-                        connectors.plotX,
-                    isNumber(connectors.leftContY) ?
-                        connectors.leftContY :
-                        connectors.plotY,
-                    connectors.plotX,
-                    connectors.plotY
-                ];
-            }
-        }
-        else {
-            ret = proceed.call(this, segment, point, i);
-        }
-        return ret;
-    });
-    // #6430 Areasplinerange series use unwrapped getPointSpline method, so
-    // we need to set this method again.
-    if (seriesTypes.areasplinerange) {
-        seriesTypes.areasplinerange.prototype
-            .getPointSpline = seriesTypes.spline.prototype.getPointSpline;
-    }
-}
-/**
- * Extend translate. The plotX and plotY values are computed as if the polar
- * chart were a cartesian plane, where plotX denotes the angle in radians
- * and (yAxis.len - plotY) is the pixel distance from center.
- * @private
- */
-addEvent(Series, 'afterTranslate', function () {
-    var series = this;
-    var chart = series.chart;
-    if (chart.polar && series.xAxis) {
-        // Prepare k-d-tree handling. It searches by angle (clientX) in
-        // case of shared tooltip, and by two dimensional distance in case
-        // of non-shared.
-        series.kdByAngle = chart.tooltip && chart.tooltip.shared;
-        if (series.kdByAngle) {
-            series.searchPoint = series.searchPointByAngle;
-        }
-        else {
-            series.options.findNearestPointBy = 'xy';
-        }
-        // Postprocess plot coordinates
-        if (!series.preventPostTranslate) {
-            var points = series.points;
-            var i = points.length;
-            while (i--) {
-                // Translate plotX, plotY from angle and radius to true plot
-                // coordinates
-                series.toXY(points[i]);
-                // Treat points below Y axis min as null (#10082)
-                if (!chart.hasParallelCoordinates &&
-                    !series.yAxis.reversed &&
-                    points[i].y < series.yAxis.min) {
-                    points[i].isNull = true;
-                }
-            }
-        }
-        // Perform clip after render
-        if (!this.hasClipCircleSetter) {
-            this.hasClipCircleSetter = !!series.eventsToUnbind.push(addEvent(series, 'afterRender', function () {
-                var circ;
-                if (chart.polar) {
-                    // For clipping purposes there is a need for
-                    // coordinates from the absolute center
-                    circ = this.yAxis.pane.center;
-                    if (!this.clipCircle) {
-                        this.clipCircle = chart.renderer.clipCircle(circ[0], circ[1], circ[2] / 2, circ[3] / 2);
-                    }
-                    else {
-                        this.clipCircle.animate({
-                            x: circ[0],
-                            y: circ[1],
-                            r: circ[2] / 2,
-                            innerR: circ[3] / 2
-                        });
-                    }
-                    this.group.clip(this.clipCircle);
-                    this.setClip = H.noop;
-                }
-            }));
-        }
-    }
-}, { order: 2 }); // Run after translation of ||-coords
-/**
- * Extend getSegmentPath to allow connecting ends across 0 to provide a
- * closed circle in line-like series.
- * @private
- */
-wrap(seriesTypes.line.prototype, 'getGraphPath', function (proceed, points) {
-    var series = this, i, firstValid, popLastPoint;
-    // Connect the path
-    if (this.chart.polar) {
-        points = points || this.points;
-        // Append first valid point in order to connect the ends
-        for (i = 0; i < points.length; i++) {
-            if (!points[i].isNull) {
-                firstValid = i;
-                break;
-            }
-        }
-        /**
-         * Polar charts only. Whether to connect the ends of a line series
-         * plot across the extremes.
-         *
-         * @sample {highcharts} highcharts/plotoptions/line-connectends-false/
-         *         Do not connect
-         *
-         * @type      {boolean}
-         * @since     2.3.0
-         * @product   highcharts
-         * @apioption plotOptions.series.connectEnds
-         */
-        if (this.options.connectEnds !== false &&
-            typeof firstValid !== 'undefined') {
-            this.connectEnds = true; // re-used in splines
-            points.splice(points.length, 0, points[firstValid]);
-            popLastPoint = true;
-        }
-        // For area charts, pseudo points are added to the graph, now we
-        // need to translate these
-        points.forEach(function (point) {
-            if (typeof point.polarPlotY === 'undefined') {
-                series.toXY(point);
-            }
-        });
-    }
-    // Run uber method
-    var ret = proceed.apply(this, [].slice.call(arguments, 1));
-    // #6212 points.splice method is adding points to an array. In case of
-    // areaspline getGraphPath method is used two times and in both times
-    // points are added to an array. That is why points.pop is used, to get
-    // unmodified points.
-    if (popLastPoint) {
-        points.pop();
-    }
-    return ret;
-});
-var polarAnimate = function (proceed, init) {
-    var series = this, chart = this.chart, animation = this.options.animation, group = this.group, markerGroup = this.markerGroup, center = this.xAxis && this.xAxis.center, plotLeft = chart.plotLeft, plotTop = chart.plotTop, attribs, paneInnerR, graphic, shapeArgs, r, innerR;
-    // Specific animation for polar charts
-    if (chart.polar) {
-        if (series.isRadialBar) {
-            if (!init) {
-                // Run the pie animation for radial bars
-                series.startAngleRad = pick(series.translatedThreshold, series.xAxis.startAngleRad);
-                H.seriesTypes.pie.prototype.animate.call(series, init);
-            }
-        }
-        else {
-            // Enable animation on polar charts only in SVG. In VML, the scaling
-            // is different, plus animation would be so slow it would't matter.
-            if (chart.renderer.isSVG) {
-                animation = animObject(animation);
-                // A different animation needed for column like series
-                if (series.is('column')) {
-                    if (!init) {
-                        paneInnerR = center[3] / 2;
-                        series.points.forEach(function (point) {
-                            graphic = point.graphic;
-                            shapeArgs = point.shapeArgs;
-                            r = shapeArgs && shapeArgs.r;
-                            innerR = shapeArgs && shapeArgs.innerR;
-                            if (graphic && shapeArgs) {
-                                // start values
-                                graphic.attr({
-                                    r: paneInnerR,
-                                    innerR: paneInnerR
-                                });
-                                // animate
-                                graphic.animate({
-                                    r: r,
-                                    innerR: innerR
-                                }, series.options.animation);
-                            }
-                        });
-                    }
-                }
-                else {
-                    // Initialize the animation
-                    if (init) {
-                        // Scale down the group and place it in the center
-                        attribs = {
-                            translateX: center[0] + plotLeft,
-                            translateY: center[1] + plotTop,
-                            scaleX: 0.001,
-                            scaleY: 0.001
-                        };
-                        group.attr(attribs);
-                        if (markerGroup) {
-                            markerGroup.attr(attribs);
-                        }
-                        // Run the animation
-                    }
-                    else {
-                        attribs = {
-                            translateX: plotLeft,
-                            translateY: plotTop,
-                            scaleX: 1,
-                            scaleY: 1
-                        };
-                        group.animate(attribs, animation);
-                        if (markerGroup) {
-                            markerGroup.animate(attribs, animation);
-                        }
-                    }
-                }
-            }
-        }
-        // For non-polar charts, revert to the basic animation
-    }
-    else {
-        proceed.call(this, init);
-    }
-};
-// Define the animate method for regular series
-wrap(seriesProto, 'animate', polarAnimate);
-if (seriesTypes.column) {
-    arearangeProto = seriesTypes.arearange.prototype;
-    columnProto = seriesTypes.column.prototype;
-    columnProto.polarArc = function (low, high, start, end) {
-        var center = this.xAxis.center, len = this.yAxis.len, paneInnerR = center[3] / 2, r = len - high + paneInnerR, innerR = len - pick(low, len) + paneInnerR;
-        // Prevent columns from shooting through the pane's center
-        if (this.yAxis.reversed) {
-            if (r < 0) {
-                r = paneInnerR;
-            }
-            if (innerR < 0) {
-                innerR = paneInnerR;
-            }
-        }
-        // Return a new shapeArgs
-        return {
-            x: center[0],
-            y: center[1],
-            r: r,
-            innerR: innerR,
-            start: start,
-            end: end
-        };
-    };
-    /**
-     * Define the animate method for columnseries
-     * @private
-     */
-    wrap(columnProto, 'animate', polarAnimate);
-    /**
-     * Extend the column prototype's translate method
-     * @private
-     */
-    wrap(columnProto, 'translate', function (proceed) {
-        var series = this, options = series.options, threshold = options.threshold, stacking = options.stacking, chart = series.chart, xAxis = series.xAxis, yAxis = series.yAxis, reversed = yAxis.reversed, center = yAxis.center, startAngleRad = xAxis.startAngleRad, endAngleRad = xAxis.endAngleRad, visibleRange = endAngleRad - startAngleRad, thresholdAngleRad, points, point, i, yMin, yMax, start, end, tooltipPos, pointX, pointY, stackValues, stack, barX, innerR, r;
-        series.preventPostTranslate = true;
-        // Run uber method
-        proceed.call(series);
-        // Postprocess plot coordinates
-        if (xAxis.isRadial) {
-            points = series.points;
-            i = points.length;
-            yMin = yAxis.translate(yAxis.min);
-            yMax = yAxis.translate(yAxis.max);
-            threshold = options.threshold || 0;
-            if (chart.inverted) {
-                // Finding a correct threshold
-                if (isNumber(threshold)) {
-                    thresholdAngleRad = yAxis.translate(threshold);
-                    // Checks if threshold is outside the visible range
-                    if (defined(thresholdAngleRad)) {
-                        if (thresholdAngleRad < 0) {
-                            thresholdAngleRad = 0;
-                        }
-                        else if (thresholdAngleRad > visibleRange) {
-                            thresholdAngleRad = visibleRange;
-                        }
-                        // Adding start angle offset
-                        series.translatedThreshold =
-                            thresholdAngleRad + startAngleRad;
-                    }
-                }
-            }
-            while (i--) {
-                point = points[i];
-                barX = point.barX;
-                pointX = point.x;
-                pointY = point.y;
-                point.shapeType = 'arc';
-                if (chart.inverted) {
-                    point.plotY = yAxis.translate(pointY);
-                    if (stacking && yAxis.stacking) {
-                        stack = yAxis.stacking.stacks[(pointY < 0 ? '-' : '') +
-                            series.stackKey];
-                        if (series.visible && stack && stack[pointX]) {
-                            if (!point.isNull) {
-                                stackValues = stack[pointX].points[series.getStackIndicator(void 0, pointX, series.index).key];
-                                // Translating to radial values
-                                start = yAxis.translate(stackValues[0]);
-                                end = yAxis.translate(stackValues[1]);
-                                // If starting point is beyond the
-                                // range, set it to 0
-                                if (defined(start)) {
-                                    start = U.clamp(start, 0, visibleRange);
-                                }
-                            }
-                        }
-                    }
-                    else {
-                        // Initial start and end angles for radial bar
-                        start = thresholdAngleRad;
-                        end = point.plotY;
-                    }
-                    if (start > end) {
-                        // Swapping start and end
-                        end = [start, start = end][0];
-                    }
-                    // Prevent from rendering point outside the
-                    // acceptable circular range
-                    if (!reversed) {
-                        if (start < yMin) {
-                            start = yMin;
-                        }
-                        else if (end > yMax) {
-                            end = yMax;
-                        }
-                        else if (end < yMin || start > yMax) {
-                            start = end = 0;
-                        }
-                    }
-                    else {
-                        if (end > yMin) {
-                            end = yMin;
-                        }
-                        else if (start < yMax) {
-                            start = yMax;
-                        }
-                        else if (start > yMin || end < yMax) {
-                            start = end = visibleRange;
-                        }
-                    }
-                    if (yAxis.min > yAxis.max) {
-                        start = end = reversed ? visibleRange : 0;
-                    }
-                    start += startAngleRad;
-                    end += startAngleRad;
-                    if (center) {
-                        point.barX = barX += center[3] / 2;
-                    }
-                    // In case when radius, inner radius or both are
-                    // negative, a point is rendered but partially or as
-                    // a center point
-                    innerR = Math.max(barX, 0);
-                    r = Math.max(barX + point.pointWidth, 0);
-                    point.shapeArgs = {
-                        x: center && center[0],
-                        y: center && center[1],
-                        r: r,
-                        innerR: innerR,
-                        start: start,
-                        end: end
-                    };
-                    // Fade out the points if not inside the polar "plot area"
-                    point.opacity = start === end ? 0 : void 0;
-                    // A correct value for stacked or not fully visible
-                    // point
-                    point.plotY = (defined(series.translatedThreshold) &&
-                        (start < series.translatedThreshold ? start : end)) -
-                        startAngleRad;
-                }
-                else {
-                    start = barX + startAngleRad;
-                    // Changed the way polar columns are drawn in order to make
-                    // it more consistent with the drawing of inverted columns
-                    // (they are using the same function now). Also, it was
-                    // essential to make the animation work correctly (the
-                    // scaling of the group) is replaced by animating each
-                    // element separately.
-                    point.shapeArgs = series.polarArc(point.yBottom, point.plotY, start, start + point.pointWidth);
-                }
-                // Provided a correct coordinates for the tooltip
-                series.toXY(point);
-                if (chart.inverted) {
-                    tooltipPos = yAxis.postTranslate(point.rectPlotY, barX + point.pointWidth / 2);
-                    point.tooltipPos = [
-                        tooltipPos.x - chart.plotLeft,
-                        tooltipPos.y - chart.plotTop
-                    ];
-                }
-                else {
-                    point.tooltipPos = [point.plotX, point.plotY];
-                }
-                if (center) {
-                    point.ttBelow = point.plotY > center[1];
-                }
-            }
-        }
-    });
-    /**
-     * Find correct align and vertical align based on an angle in polar chart
-     * @private
-     */
-    columnProto.findAlignments = function (angle, options) {
-        var align, verticalAlign;
-        if (options.align === null) {
-            if (angle > 20 && angle < 160) {
-                align = 'left'; // right hemisphere
-            }
-            else if (angle > 200 && angle < 340) {
-                align = 'right'; // left hemisphere
-            }
-            else {
-                align = 'center'; // top or bottom
-            }
-            options.align = align;
-        }
-        if (options.verticalAlign === null) {
-            if (angle < 45 || angle > 315) {
-                verticalAlign = 'bottom'; // top part
-            }
-            else if (angle > 135 && angle < 225) {
-                verticalAlign = 'top'; // bottom part
-            }
-            else {
-                verticalAlign = 'middle'; // left or right
-            }
-            options.verticalAlign = verticalAlign;
-        }
-        return options;
-    };
-    if (arearangeProto) {
-        arearangeProto.findAlignments = columnProto.findAlignments;
-    }
-    /**
-     * Align column data labels outside the columns. #1199.
-     * @private
-     */
-    wrap(columnProto, 'alignDataLabel', function (proceed, point, dataLabel, options, alignTo, isNew) {
-        var chart = this.chart, inside = pick(options.inside, !!this.options.stacking), angle, shapeArgs, labelPos;
-        if (chart.polar) {
-            angle = point.rectPlotX / Math.PI * 180;
-            if (!chart.inverted) {
-                // Align nicely outside the perimeter of the columns
-                if (this.findAlignments) {
-                    options = this.findAlignments(angle, options);
-                }
-            }
-            else { // Required corrections for data labels of inverted bars
-                // The plotX and plotY are correctly set therefore they
-                // don't need to be swapped (inverted argument is false)
-                this.forceDL = chart.isInsidePlot(point.plotX, Math.round(point.plotY));
-                // Checks if labels should be positioned inside
-                if (inside && point.shapeArgs) {
-                    shapeArgs = point.shapeArgs;
-                    // Calculates pixel positions for a data label to be
-                    // inside
-                    labelPos =
-                        this.yAxis.postTranslate(
-                        // angle
-                        ((shapeArgs.start || 0) + (shapeArgs.end || 0)) / 2 -
-                            this
-                                .xAxis.startAngleRad, 
-                        // radius
-                        point.barX +
-                            point.pointWidth / 2);
-                    alignTo = {
-                        x: labelPos.x - chart.plotLeft,
-                        y: labelPos.y - chart.plotTop
-                    };
-                }
-                else if (point.tooltipPos) {
-                    alignTo = {
-                        x: point.tooltipPos[0],
-                        y: point.tooltipPos[1]
-                    };
-                }
-                options.align = pick(options.align, 'center');
-                options.verticalAlign =
-                    pick(options.verticalAlign, 'middle');
-            }
-            seriesProto.alignDataLabel.call(this, point, dataLabel, options, alignTo, isNew);
-            // Hide label of a point (only inverted) that is outside the
-            // visible y range
-            if (this.isRadialBar && point.shapeArgs &&
-                point.shapeArgs.start === point.shapeArgs.end) {
-                dataLabel.hide(true);
-            }
-        }
-        else {
-            proceed.call(this, point, dataLabel, options, alignTo, isNew);
-        }
-    });
-}
-/**
- * Extend getCoordinates to prepare for polar axis values
- * @private
- */
-wrap(pointerProto, 'getCoordinates', function (proceed, e) {
-    var chart = this.chart, ret = {
-        xAxis: [],
-        yAxis: []
-    };
-    if (chart.polar) {
-        chart.axes.forEach(function (axis) {
-            var isXAxis = axis.isXAxis, center = axis.center, x, y;
-            // Skip colorAxis
-            if (axis.coll === 'colorAxis') {
-                return;
-            }
-            x = e.chartX - center[0] - chart.plotLeft;
-            y = e.chartY - center[1] - chart.plotTop;
-            ret[isXAxis ? 'xAxis' : 'yAxis'].push({
-                axis: axis,
-                value: axis.translate(isXAxis ?
-                    Math.PI - Math.atan2(x, y) : // angle
-                    // distance from center
-                    Math.sqrt(Math.pow(x, 2) + Math.pow(y, 2)), true)
-            });
-        });
-    }
-    else {
-        ret = proceed.call(this, e);
-    }
-    return ret;
-});
-SVGRenderer.prototype.clipCircle = function (x, y, r, innerR) {
-    var wrapper, id = uniqueKey(), clipPath = this.createElement('clipPath').attr({
-        id: id
-    }).add(this.defs);
-    wrapper = innerR ?
-        this.arc(x, y, r, innerR, 0, 2 * Math.PI).add(clipPath) :
-        this.circle(x, y, r).add(clipPath);
-    wrapper.id = id;
-    wrapper.clipPath = clipPath;
-    return wrapper;
-};
-addEvent(Chart, 'getAxes', function () {
-    if (!this.pane) {
-        this.pane = [];
-    }
-    this.options.pane = splat(this.options.pane);
-    this.options.pane.forEach(function (paneOptions) {
-        new Pane(// eslint-disable-line no-new
-        paneOptions, this);
-    }, this);
-});
-addEvent(Chart, 'afterDrawChartBox', function () {
-    this.pane.forEach(function (pane) {
-        pane.render();
-    });
-});
-addEvent(Series, 'afterInit', function () {
-    var chart = this.chart;
-    // Add flags that identifies radial inverted series
-    if (chart.inverted && chart.polar) {
-        this.isRadialSeries = true;
-        if (this.is('column')) {
-            this.isRadialBar = true;
-        }
-    }
-});
-/**
- * Extend chart.get to also search in panes. Used internally in
- * responsiveness and chart.update.
- * @private
- */
-wrap(Chart.prototype, 'get', function (proceed, id) {
-    return find(this.pane || [], function (pane) {
-        return pane.options.id === id;
-    }) || proceed.call(this, id);
-});