prizmkit 1.1.99 → 1.1.101

package/bundled/dev-pipeline-windows/templates/bootstrap-prompt.md

@@ -1,73 +0,0 @@
-# Dev-Pipeline Fallback Bootstrap Prompt
-
-> **Note**: This is an emergency fallback template. Normally, `generate-bootstrap-prompt.py`
-> selects a tier-specific template (`bootstrap-tier1.md`, `bootstrap-tier2.md`, or `bootstrap-tier3.md`).
-> If you are seeing this prompt, the tier-specific templates were not found.
-
-## Feature Context
-
-- **Feature ID**: {{FEATURE_ID}}
-- **Title**: {{FEATURE_TITLE}}
-- **Description**: {{FEATURE_DESCRIPTION}}
-- **Slug**: {{FEATURE_SLUG}}
-
-{{USER_CONTEXT}}
-
-### Acceptance Criteria
-
-{{ACCEPTANCE_CRITERIA}}
-
-## Your Mission
-
-You are the **session orchestrator**. Implement Feature {{FEATURE_ID}}: "{{FEATURE_TITLE}}".
-
-**CRITICAL**: You MUST NOT exit until ALL work is complete and committed.
-
-## Instructions
-
-You are running in **headless non-interactive mode** — no human is available for input.
-Infer what needs to be done from the feature context above and follow the standard dev loop.
-
-### Execution Steps
-
-1. **Read context**: Read `.prizmkit/prizm-docs/root.prizm` and relevant L1/L2 docs to understand the codebase.
-
-2. **Plan**: Run `/prizmkit-plan` with `artifact_dir=.prizmkit/specs/{{FEATURE_SLUG}}/` to produce `spec.md` and `plan.md`.
-
-3. **Implement**: Run `/prizmkit-implement` with `artifact_dir=.prizmkit/specs/{{FEATURE_SLUG}}/` to execute the plan using TDD (write tests first, then implement).
-
-4. **Test**: Run `/prizmkit-test scope=this-change artifact_dir=.prizmkit/specs/{{FEATURE_SLUG}}/` to generate and verify tests only for this feature's changed scope. Do not use bugfix/refactor artifact directories for this gate.
-
-5. **Review**: Run `/prizmkit-code-review` with `artifact_dir=.prizmkit/specs/{{FEATURE_SLUG}}/` to review and auto-fix changes against the spec (internal review-fix loop, max 3 rounds).
-
-6. **Retrospective**: Run `/prizmkit-retrospective` to sync `.prizmkit/prizm-docs/` with code changes.
-
-7. **Commit**: Run `/prizmkit-committer --headless` to commit all changes. Do NOT push.
-
-### Critical Rules
-
-- Do NOT ask for user input — decide autonomously.
-- Do NOT push to remote — the user will push manually.
-- Write all artifacts to `.prizmkit/specs/{{FEATURE_SLUG}}/`.
-- If a step fails after 3 attempts, write a status report and stop.
-
-
-## Failure Capture Protocol
-
-If you encounter an unrecoverable error, context overflow, or are about to exit without completing all steps:
-
-1. Write `.prizmkit/specs/{{FEATURE_SLUG}}/failure-log.md` BEFORE exiting:
-   ```
-   FAILURE_TYPE: timeout | test_failure | review_rejected | context_overflow | unknown
-   PHASE: <failed phase>
-   ROOT_CAUSE: <1-2 sentence explanation>
-   ATTEMPTED: <approaches already tried>
-   SUGGESTION: <what the next session should try differently>
-   ```
-
-2. This file is intentionally lightweight — write it BEFORE context runs out.
-
-After a successful session (all steps complete + commit done), delete it:
-```powershell
-Remove-Item -Force -ErrorAction SilentlyContinue .prizmkit/specs/{{FEATURE_SLUG}}/failure-log.md
-```

package/bundled/dev-pipeline-windows/templates/bootstrap-tier1.md

@@ -1,589 +0,0 @@
-# Dev-Pipeline Session Bootstrap — Tier 1 (Single Agent)
-
-## Session Context
-
-- **Feature ID**: {{FEATURE_ID}} | **Session**: {{SESSION_ID}} | **Run**: {{RUN_ID}}
-- **Complexity**: {{COMPLEXITY}}
-- **Init**: {{INIT_DONE}} | Artifacts: spec={{HAS_SPEC}} plan={{HAS_PLAN}}
-
-## Your Mission
-
-You are the **session orchestrator**. Implement Feature {{FEATURE_ID}}: "{{FEATURE_TITLE}}".
-
-**CRITICAL**: You MUST NOT exit until ALL work is complete and committed.
-
-**Tier 1 — Single Agent**: You handle everything directly. No normal work subagents; the log-size monitor is the only allowed persistent background subagent. No TeamCreate.
-
-### Feature Description
-
-{{FEATURE_DESCRIPTION}}
-
-{{USER_CONTEXT}}
-
-### Acceptance Criteria
-
-{{ACCEPTANCE_CRITERIA}}
-
-### Project Brief
-
-> Product ideas checklist from planning. Lines marked [x] are already implemented. When your feature touches any [ ] item, ensure alignment. After implementation, mark relevant items [x] and append the key file/directory paths.
-
-{{PROJECT_BRIEF}}
-
-### Dependencies (Already Completed)
-
-{{COMPLETED_DEPENDENCIES}}
-
-### App Global Context
-
-{{GLOBAL_CONTEXT}}
-
-## ⚠️ Context Budget Rules (CRITICAL — read before any phase)
-
-You are running in **headless non-interactive mode** with a FINITE context window. Exceeding it will crash the session and lose all work. Follow these rules strictly:
-
-0. **NON-INTERACTIVE MODE** — There is NO human on the other end. NEVER ask for user confirmation, NEVER wait for user input, NEVER use interactive prompts (e.g. "Would you like me to…"). If a skill has an interactive step (e.g. offer remediation, ask for approval), skip it and proceed autonomously. Make decisions based on the data available and move forward.
-
-1. **context-snapshot.md is your single source of truth** — After Phase 1 builds it, ALWAYS read context-snapshot.md instead of re-reading individual source files
-2. **Never re-read your own writes** — After you create/modify a file, do NOT read it back to verify. Trust your write was correct.
-3. **Stay focused** — Do NOT explore code unrelated to this feature. No curiosity-driven reads.
-4. **One task at a time** — In Phase 3 (implement), complete and test one task before starting the next.
-5. **Minimize tool output** — Never load full command output into context. First capture to a temp file (`& { <command> } 2>&1 | Tee-Object (Join-Path $env:TEMP "out.txt") | Select-Object -Last 20`), then scan the first/last lines to identify relevant fields, and use targeted filtering (`Select-String`, regex matching, PowerShell object filtering) to extract only the information needed for the current task. Only read the filtered result — never the raw full output.
-6. **No intermediate commits** — Do NOT run `git add`/`git commit` during Phase 1-3. All changes are committed once at the end in Phase 4 via `/prizmkit-committer`.
-7. **Capture test output once** — When running test suites, always use `& { {{TEST_CMD}} } 2>&1 | Tee-Object (Join-Path $env:TEMP "test-out.txt") | Select-Object -Last 20`. Then Select-String `(Join-Path $env:TEMP "test-out.txt")` for details. Never re-run the suite just to apply a different filter.
-
----
-
-{{LOG_SIZE_AWARENESS}}
----
-
-## PrizmKit Directory Convention
-
-```
-.prizmkit/specs/{{FEATURE_SLUG}}/context-snapshot.md
-.prizmkit/specs/{{FEATURE_SLUG}}/plan.md              ← includes Tasks section
-```
-
----
-
-## Execution
-
-### PowerShell Python Helper
-
-Define this helper once in the active PowerShell session before running PrizmKit Python scripts:
-
-```powershell
-function Invoke-PrizmPython {
-  param([Parameter(ValueFromRemainingArguments = $true)][string[]]$Arguments)
-  $python = Get-Command python -ErrorAction SilentlyContinue
-  if ($python) {
-    & $python.Source -c 'import sys; raise SystemExit(0 if sys.version_info[0] == 3 else 1)' *> $null
-    if ($LASTEXITCODE -eq 0) {
-      & $python.Source @Arguments
-      return
-    }
-  }
-  $py = Get-Command py -ErrorAction SilentlyContinue
-  if ($py) {
-    & $py.Source -3 -c 'import sys; raise SystemExit(0 if sys.version_info[0] == 3 else 1)' *> $null
-    if ($LASTEXITCODE -eq 0) {
-      & $py.Source -3 @Arguments
-      return
-    }
-  }
-  throw "Python 3 is required. Install Python and ensure python or py is in PATH."
-}
-```
-
-
-{{IF_INIT_NEEDED}}
-### Phase 0: Project Bootstrap
-- Run `/prizmkit-init` (invoke the prizmkit-init skill)
-- Run `Invoke-PrizmPython {{INIT_SCRIPT_PATH}} --project-root {{PROJECT_ROOT}} --feature-id {{FEATURE_ID}} --feature-slug {{FEATURE_SLUG}}`
-- **CP-0**: Verify `.prizmkit/prizm-docs/root.prizm`, `.prizmkit/config.json` exist
-{{END_IF_INIT_NEEDED}}
-{{IF_INIT_DONE}}
-### Phase 0: SKIP (already initialized)
-{{END_IF_INIT_DONE}}
-
-### Phase 1: Build Context Snapshot
-
-```powershell
-if (Test-Path -LiteralPath ".prizmkit/specs/{{FEATURE_SLUG}}/context-snapshot.md") { "EXISTS" } else { "MISSING" }
-```
-
-If MISSING — build it now:
-1. Read `.prizmkit/prizm-docs/root.prizm` and relevant L1 prizm docs
-2. Detect source code directories: read KEY_FILES and STRUCTURE sections from `root.prizm` to identify where source code lives (e.g. `src/`, `app/`, `lib/`, `cmd/`, `packages/`, or project root). If `root.prizm` is missing, scan the project tree:
-   ```powershell
-Get-ChildItem -Path . -Recurse -File -Depth 2 -Include *.js,*.ts,*.py,*.go,*.java,*.rb,*.rs -ErrorAction SilentlyContinue |
-  Where-Object { $_.FullName -notmatch '\\(node_modules|\.git|dist|build|vendor)\\' } |
-  Select-Object -First 30 -ExpandProperty FullName
-```
-   Identify the top-level source directories from the results.
-3. Scan the detected source directories for files related to this feature; read each one
-4. Write `.prizmkit/specs/{{FEATURE_SLUG}}/context-snapshot.md`:
-   - **Section 1 — Feature Brief**: feature description + acceptance criteria (copy from above)
-   - **Section 2 — Project Structure**: run the following to get a visual directory tree, then paste output:
-     ```powershell
-Get-ChildItem -Path . -Directory -Recurse -Depth 2 -ErrorAction SilentlyContinue |
-  Where-Object { $_.FullName -notmatch '\\(node_modules|\.git|dist|build|__pycache__|vendor)\\' } |
-  Select-Object -ExpandProperty FullName
-```
-   - **Section 3 — Prizm Context**: content of root.prizm and relevant L1/L2 docs
-   - **Section 4 — Existing Source Files**: **full verbatim content** of each related file in fenced code blocks (with `### path/to/file` heading and line count). Include ALL files needed for implementation and review — downstream phases read this section instead of re-reading individual source files
-   - **Section 5 — Existing Tests**: full content of related test files as code block
-
-### Phase 2: Plan & Tasks
-
-```powershell
-Get-ChildItem -LiteralPath ".prizmkit/specs/{{FEATURE_SLUG}}/" -ErrorAction SilentlyContinue
-```
-
-If plan.md missing, run `/prizmkit-plan` with `artifact_dir=.prizmkit/specs/{{FEATURE_SLUG}}/` to generate `plan.md`:
-- The plan.md should include: key components, data flow, files to create/modify, and a Tasks section with `[ ]` checkboxes (each task = one implementable unit). Keep under 80 lines.
-- Resolve any `[NEEDS CLARIFICATION]` markers using the feature description — do NOT pause for interactive input.
-
-**Database Design Gate** (if feature involves data persistence — new tables, schema changes, new entities):
-Before proceeding past CP-1:
-1. Scan for existing schema files (`*.prisma`, `*.sql`, `migrations/`, `models/`, `*.entity.*`) and read them
-2. Ensure new tables/fields follow existing naming conventions and constraint patterns
-3. Resolve all uncertain DB design decisions before writing Tasks — document choices in plan.md
-
-**CP-1**: plan.md exists with Tasks section.
-
-### Phase 3: Implement + Test
-
-**Build artifacts**: After any build/compile command (`go build`, `npm run build`, `tsc`, etc.), ensure the output binary or build directory is in `.gitignore`:
-```powershell
-# Example for Go
-if (-not (Select-String -Path .gitignore -Pattern '^/binary-name$' -Quiet -ErrorAction SilentlyContinue)) {
-  Add-Content -Path .gitignore -Value '/binary-name'
-}
-```
-Never commit compiled binaries, build output, or generated artifacts.
-
-**3a.** Detect test commands and record baseline:
-
-You know this project's tech stack. Identify ALL test commands that apply (e.g., `go test ./...`, `npm test`, `cargo test`, `pytest`, `make test`, etc.). Record them as `TEST_CMDS` (one or more commands). Then record baseline:
-```powershell
-# Run each test command, capture output
-& { {{TEST_CMD}} } 2>&1 | Tee-Object (Join-Path $env:TEMP "test-baseline.txt") | Select-Object -Last 20
-```
-
-**3b.** Run `/prizmkit-implement` — this handles the full implementation cycle:
-- Reads plan.md Tasks section from `.prizmkit/specs/{{FEATURE_SLUG}}/`
-- Reads context from `context-snapshot.md` (Prizm docs, TRAPS, file manifest)
-- Implements task-by-task with TDD, marking each `[x]` immediately
-- Creates/updates L2 `.prizm` docs when creating new modules or significantly modifying existing ones — AI selectively decides the modules that warrant L2 based on complexity and importance
-- Runs tests using `TEST_CMD` after each task
-- Writes '## Implementation Log' to `context-snapshot.md`
-
-**3b-compact.** Context management — if plan.md has more than 5 tasks, run `/compact` after completing every 3 tasks during implementation. This prevents context window exhaustion in long sessions. If `/compact` is not available (non-Claude CLI), skip this step.
-
-**3c.** After implement completes, verify:
-1. All tasks in plan.md are `[x]`
-2. Run the full test suite to ensure nothing is broken
-3. Verify each acceptance criterion from Section 1 of context-snapshot.md is met — check mentally, do NOT re-read files you already wrote
-4. If any criterion is not met, fix it now using the convergence-based recovery loop below
-
-**CP-2**: All acceptance criteria met, all tests pass.
-
-### Test Failure Recovery (Convergence-Based)
-
-When tests fail, use convergence recovery — keep fixing while progress is being made:
-
-1. **Run tests, record results**: count failures, exclude baseline failures
-2. **Check termination**: All pass → done | Plateau (same failures 3 rounds) → stop | Failures decreased → continue
-3. **Fix and iterate**: analyze, fix, re-run `({{TEST_CMD}})`, go back to step 1
-
-**Key rule**: If failures decrease (even by 1), plateau counter resets. Do NOT block commit for unresolved failures — document and defer to next session.
-
-
-### Scoped Feature Test Gate — PrizmKit Test
-
-Run `/prizmkit-test scope=this-change artifact_dir=.prizmkit/specs/{{FEATURE_SLUG}}/` after implementation and before review/commit.
-
-Before invoking the skill, create `.prizmkit/specs/{{FEATURE_SLUG}}/.prizmkit-test-started` so stale reports are ignored.
-
-Gate requirements:
-- Generate or update tests only for this feature's changed files, changed public interfaces, and acceptance criteria.
-- Do NOT use `.prizmkit/bugfix/` or `.prizmkit/refactor/` artifact directories.
-- Record unrelated historical gaps under `Out of Scope Gaps`; do not generate tests for them and do not fail this feature because of them.
-- Accept only a current-run `.prizmkit/test/*/test-report.md` whose `Scope` mode is `this-change`, whose `Artifact Dir` matches `.prizmkit/specs/{{FEATURE_SLUG}}/`, whose `Verdict` is `PASS`, whose `Boundary Completion Gate` reports `Completion gate passed: yes` with zero `Boundary-missing` and zero `Happy-path-only`, and whose `Boundary Validation` result is `passed`.
-- Only after a valid `PASS`, write the report path to `.prizmkit/specs/{{FEATURE_SLUG}}/test-report-path.txt` and append a 3-5 bullet `## PrizmKit Test Gate` summary to `context-snapshot.md`.
-- If the report verdict is `NEEDS_FIXES`, fix in-scope implementation/test issues and rerun `/prizmkit-test`. If the report is `BLOCKED`, missing, stale, or for the wrong scope/artifact dir, write `failure-log.md` and stop for recovery.
-
-{{IF_BROWSER_INTERACTION}}
-### Phase 3.5: Browser Verification — MANDATORY
-
-You MUST execute this phase. Do NOT skip it.
-
-**Browser Tool**: {{BROWSER_TOOL}}
-
-{{IF_BROWSER_TOOL_PLAYWRIGHT}}
-**Using: playwright-cli**
-
-**CRITICAL CONSTRAINT — playwright-cli ONLY, NO Playwright MCP**:
-- You MUST use `playwright-cli` (the CLI tool) for ALL browser interactions in this phase
-- **NEVER** use Playwright MCP server, Playwright MCP tools, or any MCP-based browser automation
-- If you have Playwright MCP configured, IGNORE it entirely — use the CLI command `playwright-cli` exclusively
-- All browser actions go through `playwright-cli <command>` in the PowerShell tool, not through any MCP tool call
-
-**Step 0 — Playwright CLI Readiness Check (BLOCKING — must pass before any browser action)**:
-
-0a. Check if `playwright-cli` is installed:
-```powershell
-$playwright = Get-Command playwright-cli -ErrorAction SilentlyContinue
-if ($playwright) { playwright-cli --version } else { "NOT_INSTALLED" }
-```
-If output is `NOT_INSTALLED`, install it:
-```powershell
-npm install -g @playwright/cli@latest
-```
-Then verify installation succeeded:
-```powershell
-playwright-cli --version
-```
-If installation fails, log the error in context-snapshot.md under `## Browser Verification: SKIPPED — playwright-cli installation failed` and proceed to the next phase. Do NOT attempt browser verification without playwright-cli.
-
-0b. Learn playwright-cli usage (run once per session to understand available commands):
-```powershell
-playwright-cli --help
-```
-Use this output to determine the correct commands for your verification steps. Do NOT guess command syntax — refer to the help output.
-
-0c. Check if playwright-cli skill is installed for the current AI platform:
-```powershell
-$currentPlatform = "unknown"
-$skillDir = $null
-if (Get-Command claude -ErrorAction SilentlyContinue) {
-  $currentPlatform = "claude"
-  $skillDir = Join-Path $HOME ".claude\skills"
-} elseif (Get-Command cbc -ErrorAction SilentlyContinue) {
-  $currentPlatform = "codebuddy"
-  $skillDir = Join-Path $HOME ".cbc\skills"
-}
-
-$skillExists = $false
-if ($skillDir) {
-  $directSkill = Join-Path $skillDir "playwright-cli"
-  $matchingSkills = Get-ChildItem -Path $skillDir -Filter "playwright*" -ErrorAction SilentlyContinue
-  $skillExists = (Test-Path -LiteralPath $directSkill) -or [bool]$matchingSkills
-}
-if ($skillExists) { "SKILL_EXISTS" } else { "SKILL_MISSING" }
-```
-If `SKILL_MISSING`:
-```powershell
-playwright-cli install --skills
-```
-If the current platform is NOT claude, move the installed skill files to the correct location:
-```powershell
-$claudeSkillDir = Join-Path $HOME ".claude\skills"
-$sourceSkill = Join-Path $claudeSkillDir "playwright-cli"
-if ($currentPlatform -ne "claude" -and $currentPlatform -ne "unknown" -and $skillDir -and (Test-Path -LiteralPath $sourceSkill)) {
-  New-Item -ItemType Directory -Force -Path $skillDir | Out-Null
-  Copy-Item -Recurse -Force -Path $sourceSkill -Destination $skillDir
-  "Moved playwright-cli skill from claude to $currentPlatform"
-}
-```
-
-0d. Read the installed playwright-cli skill for workflow guidance:
-After skill installation, read the skill's SKILL.md to understand recommended workflows and patterns. Use these patterns to construct your verification flow — do NOT invent your own patterns if the skill provides them.
-
-**Step 1 — Start Dev Server**:
-
-You know this project's tech stack. Detect and start the dev server yourself:
-
-1. Identify the dev server start command from project config (`package.json` scripts, `Makefile`, `docker-compose.yml`, etc.)
-2. **Detect the dev server port** — use the pre-detected port from pipeline if available, otherwise extract from project config. Do NOT hardcode or guess the port:
-   ```powershell
-   $DEV_PORT = "{{DEV_PORT}}"
-   if ($DEV_PORT -eq "{{DEV_PORT}}" -or [string]::IsNullOrWhiteSpace($DEV_PORT)) {
-     $detectedPort = ""
-     if (Test-Path -LiteralPath "package.json") {
-       $detectedPort = node -e "const p=require('./package.json'); const s=(p.scripts?.dev) || ''; const m=s.match(/-p\s+(\d+)/); console.log(m?m[1]:'')"
-     }
-     if (-not $detectedPort -and $env:NEXT_PUBLIC_SITE_URL -match ':([0-9]+)') {
-       $detectedPort = $Matches[1]
-     }
-     if ($detectedPort) { $DEV_PORT = $detectedPort } else { $DEV_PORT = "3000" }
-   }
-   "Detected DEV_PORT=$DEV_PORT"
-   ```
-3. Verify the port is available and start the dev server in the background, capturing its process id:
-   ```powershell
-   $portBusy = Get-NetTCPConnection -LocalPort ([int]$DEV_PORT) -ErrorAction SilentlyContinue
-   if ($portBusy) { "PORT_IN_USE" } else { "PORT_FREE" }
-   $devServerCommand = "<start-command>"
-   $server = Start-Process -FilePath "powershell" -ArgumentList @("-NoProfile", "-Command", $devServerCommand) -PassThru
-   $DEV_SERVER_PID = $server.Id
-   ```
-
-   Wait for server to be ready: poll `http://localhost:$DEV_PORT` until it returns 200 or 302 (max 30 seconds, 2s interval):
-   ```powershell
-   $ready = $false
-   for ($i = 0; $i -lt 15; $i++) {
-     try {
-       $response = Invoke-WebRequest -Uri "http://localhost:$DEV_PORT" -UseBasicParsing -TimeoutSec 2
-       if ($response.StatusCode -in @(200, 302)) { $ready = $true; break }
-     } catch {
-       Start-Sleep -Seconds 2
-     }
-   }
-   if (-not $ready) { "DEV_SERVER_NOT_READY" }
-   ```
-4. Open the app in playwright-cli: `playwright-cli open "http://localhost:$DEV_PORT"`
-5. If the page requires authentication, use playwright-cli to register a test user and log in first
-
-**Step 2 — Verification**:
-
-Use `playwright-cli snapshot` on the running app to discover actual element refs, then verify these goals:
-{{BROWSER_VERIFY_STEPS}}
-
-Construct your verification workflow based on:
-1. The playwright-cli skill documentation (read in Step 0d)
-2. The `playwright-cli --help` output (captured in Step 0b)
-3. The current task's Verification Gates and implemented features
-
-Decide the concrete playwright-cli actions (click, fill, snapshot, screenshot, etc.) yourself based on the snapshot output and your knowledge of the implemented code. The goals above describe WHAT to verify — you determine HOW using playwright-cli commands.
-
-Take a final screenshot for evidence: `playwright-cli screenshot`
-
-**Step 3 — Cleanup (REQUIRED — you started it, you stop it)**:
-
-1. Close the playwright-cli browser: `playwright-cli close`
-2. Stop the dev server process and any remaining process bound to the dev server port:
-   ```powershell
-   if ($DEV_SERVER_PID) { Stop-Process -Id $DEV_SERVER_PID -Force -ErrorAction SilentlyContinue }
-   Get-NetTCPConnection -LocalPort ([int]$DEV_PORT) -ErrorAction SilentlyContinue |
-     Select-Object -ExpandProperty OwningProcess -Unique |
-     ForEach-Object { Stop-Process -Id $_ -Force -ErrorAction SilentlyContinue }
-   ```
-
-{{END_IF_BROWSER_TOOL_PLAYWRIGHT}}
-{{IF_BROWSER_TOOL_OPENCLI}}
-**Using: opencli** (reuses Chrome logged-in sessions)
-
-**CRITICAL CONSTRAINT — opencli browser ONLY**:
-- You MUST use `opencli browser` for ALL browser interactions in this phase
-- All browser actions go through `opencli browser <command>` in the PowerShell tool
-
-**Step 0 — OpenCLI Readiness Check (BLOCKING)**:
-
-0a. Check if `opencli` is installed:
-```powershell
-$opencli = Get-Command opencli -ErrorAction SilentlyContinue
-if ($opencli) { opencli --version } else { "NOT_INSTALLED" }
-```
-If `NOT_INSTALLED`: `npm install -g @jackwener/opencli@latest`. If installation fails, log `## Browser Verification: SKIPPED — opencli installation failed` and proceed.
-
-0b. Verify Browser Bridge: `opencli doctor`. If fails, log skip and proceed.
-
-0c. Learn usage:
-```powershell
-opencli browser --help 2>$null
-if ($LASTEXITCODE -ne 0) { opencli --help }
-```
-
-**Step 1 — Start Dev Server**: use the same port detection and server lifecycle pattern as the playwright-cli path:
-```powershell
-$DEV_PORT = "{{DEV_PORT}}"
-if ($DEV_PORT -eq "{{DEV_PORT}}" -or [string]::IsNullOrWhiteSpace($DEV_PORT)) {
-  $detectedPort = ""
-  if (Test-Path -LiteralPath "package.json") {
-    $detectedPort = node -e "const p=require('./package.json'); const s=(p.scripts?.dev) || ''; const m=s.match(/-p\s+(\d+)/); console.log(m?m[1]:'')"
-  }
-  if (-not $detectedPort -and $env:NEXT_PUBLIC_SITE_URL -match ':([0-9]+)') {
-    $detectedPort = $Matches[1]
-  }
-  if ($detectedPort) { $DEV_PORT = $detectedPort } else { $DEV_PORT = "3000" }
-}
-"Detected DEV_PORT=$DEV_PORT"
-```
-```powershell
-$portBusy = Get-NetTCPConnection -LocalPort ([int]$DEV_PORT) -ErrorAction SilentlyContinue
-if ($portBusy) { "PORT_IN_USE" } else { "PORT_FREE" }
-$devServerCommand = "<start-command>"
-$server = Start-Process -FilePath "powershell" -ArgumentList @("-NoProfile", "-Command", $devServerCommand) -PassThru
-$DEV_SERVER_PID = $server.Id
-```
-
-Wait for server to be ready: poll `http://localhost:$DEV_PORT` until it returns 200 or 302 (max 30 seconds, 2s interval):
-```powershell
-$ready = $false
-for ($i = 0; $i -lt 15; $i++) {
-  try {
-    $response = Invoke-WebRequest -Uri "http://localhost:$DEV_PORT" -UseBasicParsing -TimeoutSec 2
-    if ($response.StatusCode -in @(200, 302)) { $ready = $true; break }
-  } catch {
-    Start-Sleep -Seconds 2
-  }
-}
-if (-not $ready) { "DEV_SERVER_NOT_READY" }
-```
-
-Start server, wait for ready, then:
-```powershell
-opencli browser open "http://localhost:$DEV_PORT"
-if ($LASTEXITCODE -eq 0) { opencli browser state }
-```
-
-**Step 2 — Verification**:
-
-Use `opencli browser state` to discover elements with `[N]` indices, then verify:
-{{BROWSER_VERIFY_STEPS}}
-
-Chain commands in PowerShell with semicolons and inspect each result, for example: `opencli browser click <N>; opencli browser wait time 1; opencli browser state`
-
-**Step 3 — Cleanup**:
-1. `opencli browser close`
-2. Stop the dev server process and any remaining process bound to the dev server port:
-   ```powershell
-   if ($DEV_SERVER_PID) { Stop-Process -Id $DEV_SERVER_PID -Force -ErrorAction SilentlyContinue }
-   Get-NetTCPConnection -LocalPort ([int]$DEV_PORT) -ErrorAction SilentlyContinue |
-     Select-Object -ExpandProperty OwningProcess -Unique |
-     ForEach-Object { Stop-Process -Id $_ -Force -ErrorAction SilentlyContinue }
-   ```
-
-{{END_IF_BROWSER_TOOL_OPENCLI}}
-{{IF_BROWSER_TOOL_AUTO}}
-**Tool Selection**: Choose the best browser tool at runtime.
-
-**Step 0 — Detect available tools**:
-```powershell
-"=== playwright-cli ==="
-$playwright = Get-Command playwright-cli -ErrorAction SilentlyContinue
-if ($playwright) { playwright-cli --version } else { "NOT_INSTALLED" }
-"=== opencli ==="
-$opencli = Get-Command opencli -ErrorAction SilentlyContinue
-if ($opencli) { opencli --version } else { "NOT_INSTALLED" }
-if ($opencli) {
-  opencli doctor 2>$null
-  if ($LASTEXITCODE -ne 0) { "OPENCLI_BRIDGE_FAILED" }
-}
-```
-
-**Decision table**:
-| Condition | Tool |
-|-----------|------|
-| Only playwright-cli available | playwright-cli |
-| Only opencli available (doctor passes) | opencli |
-| Both — local dev server, forms, components | playwright-cli |
-| Both — needs real login state (OAuth/SSO) | opencli |
-| Both — third-party integration verification | opencli |
-| Neither available | Install playwright-cli as default |
-
-Then follow the corresponding tool's workflow above (Steps 1-3).
-
-{{END_IF_BROWSER_TOOL_AUTO}}
-
-**Step 4 — Reporting**:
-
-Append results to `context-snapshot.md`:
-```
-## Browser Verification
-Tool: <playwright-cli or opencli>
-URL: http://localhost:$DEV_PORT
-Dev Server Command: <actual command used>
-Tool version: <version>
-Steps executed: [list of commands used]
-Screenshot: [path]
-Result: PASS / FAIL (reason)
-Server cleanup: confirmed
-Browser cleanup: confirmed
-```
-
-If verification fails, log the failure details but continue to commit. Failures do NOT block the commit, but you MUST attempt verification and MUST clean up the dev server.
-{{END_IF_BROWSER_INTERACTION}}
-
-### Phase 4: Architecture Sync & Commit (SINGLE COMMIT)
-
-**4a.** Run `/prizmkit-retrospective` — maintains `.prizmkit/prizm-docs/` (architecture index):
-1. **Structural sync**: Use `git diff --cached --name-status` to locate changed modules, update KEY_FILES/INTERFACES/DEPENDENCIES/file counts in affected `.prizmkit/prizm-docs/` files
-2. **Architecture knowledge** (feature sessions only): Extract TRAPS/RULES/DECISIONS from completed work into `.prizmkit/prizm-docs/`
-3. **L2 coverage check**: For any module/sub-module with source files created or significantly modified in this session but no L2 `.prizm` doc — evaluate whether L2 is warranted and create if so. The current session has the best context for accurate KEY_FILES, TRAPS, and DECISIONS.
-4. Stage doc changes: `git add .prizmkit/prizm-docs/`
-⚠️ Do NOT commit here. Only stage.
-
-**4b.** Stage all feature code explicitly (NEVER use `git add -A` or `git add .`):
-```powershell
-git add <specific-files-created-or-modified>
-git add .prizmkit/prizm-docs/
-```
-
-**4c.** Run `/prizmkit-committer` → THE ONLY commit for this feature:
-`feat({{FEATURE_ID}}): {{FEATURE_TITLE}}`
-This single commit includes: feature code + tests + .prizmkit/prizm-docs/ updates. Do NOT push.
-- MANDATORY: commit must be done via `/prizmkit-committer` skill. Do NOT run manual `git add`/`git commit` as a substitute.
-- Do NOT run `update-feature-status.py` here — the pipeline runner handles feature-list.json updates automatically after session exit.
-
-**4d.** Final verification:
-```powershell
-git status --short
-```
-Working tree MUST be clean after this step. If any feature-related files remain, stage them into the SAME commit via `git add <file>; if ($LASTEXITCODE -eq 0) { git commit --amend --no-edit }`, do NOT create a separate commit.
-
-**Exception**: `session-summary.md` in the artifact directory is a local cross-session artifact generated by `/prizmkit-committer` — it is NOT committed to git. Ignore it in the clean-tree check.
-
-**4e.** Write completion summary for downstream dependency context:
-
-Write `.prizmkit/specs/{{FEATURE_SLUG}}/completion-summary.json` with the key changes from this session. This file is NOT committed to git — the pipeline runner reads it to propagate context to dependent features.
-
-```json
-{
-  "completion_notes": [
-    "<each item: one key change, API, model, or integration point that downstream features may need>",
-    "Example: Added User model (id, email, password_hash, display_name) in prisma/schema.prisma",
-    "Example: POST /api/auth/register and POST /api/auth/login endpoints in src/api/auth.ts",
-    "Example: Auth middleware in src/middleware/auth.ts — validates JWT on protected routes"
-  ]
-}
-```
-
-Rules for writing completion notes:
-- Focus on **what downstream features need to know**: new APIs, models, exported functions, key file paths
-- Each note should be self-contained and concise (one line, under 120 characters preferred)
-- Include 3-8 notes covering the most important changes
-- Do NOT include test files, config changes, or internal implementation details unless they affect other features
-- If this feature has no downstream dependents, still write the summary (it serves as documentation)
-
-## Critical Paths
-
-| Resource | Path |
-|----------|------|
-| Feature Artifacts Dir | `.prizmkit/specs/{{FEATURE_SLUG}}/` |
-| Context Snapshot | `.prizmkit/specs/{{FEATURE_SLUG}}/context-snapshot.md` |
-| Project Root | {{PROJECT_ROOT}} |
-
-## Failure Capture Protocol
-
-If you encounter an unrecoverable error, context overflow, or are about to exit without completing all phases:
-
-1. Write `.prizmkit/specs/{{FEATURE_SLUG}}/failure-log.md` BEFORE exiting:
-   ```
-   FAILURE_TYPE: timeout | test_failure | review_rejected | context_overflow | unknown
-   PHASE: <Get-Command phase failed>
-   ROOT_CAUSE: <1-2 sentence explanation>
-   ATTEMPTED: <approaches already tried>
-   SUGGESTION: <what the next session should try differently>
-   DISCOVERED_TRAPS:
-   - [CRITICAL|HIGH|LOW] <gotcha discovered during this failed session> | FIX: <approach>
-   ```
-
-2. This file is intentionally lightweight — write it BEFORE context runs out.
-
-**Lifecycle**: failure-log.md is a temporary cross-session artifact. Do NOT commit it to git. After a successful session (all phases complete + commit done), delete it:
-```powershell
-Remove-Item -Force -ErrorAction SilentlyContinue .prizmkit/specs/{{FEATURE_SLUG}}/failure-log.md
-```
-
-## Reminders
-
-- Tier 1: you handle everything directly — no subagents needed
-- MANDATORY skills: `/prizmkit-retrospective`, `/prizmkit-committer` — never skip these
-- Build context-snapshot.md FIRST; use it throughout instead of re-reading files
-- `/prizmkit-committer` is mandatory — do NOT skip the commit phase, and do NOT replace it with manual git commit commands
-- Do NOT run `git add`/`git commit` during Phase 1-3 — all changes are committed once in Phase 4
-- If any files remain after the commit, amend the existing commit — do NOT create a follow-up commit
-- When staging files, always use explicit file names — NEVER use `git add -A` or `git add .`