printbench 0.4.4 → 0.4.5

package/README.md

@@ -85,7 +85,7 @@ function onExported(payload: PrintBenchExportedPayload) {
 | `selectedPartIds` | `string[]`                                            | —         | 受控选中。传入后画布点击只触发 `select-part`，由宿主回写                                                                  |
 | `partColors`      | `Record<string, string>`                              | —         | 受控零件色，`#RRGGBB`，key 为零件 `id`                                                                         |
 | `diagnosisZIndex` | `number`                                              | `100`     | 诊断浮层 `z-index`。也可在外层设 CSS 变量 `--printbench-diagnosis-z`                                         |
-| `features`        | `{ numeric?, primitives?, split?, drafts?, extras?, importUnit? }` | 全 `false` | 进阶能力。缺省精简：左栏仅导入 / 零件 / 导出 / 快照。未开 `drafts` 时不读不写自动草稿。未开 `importUnit` 时导入不弹单位确认，直接用文件声明单位或设置里的默认单位。 |
+| `features`        | `{ numeric?, primitives?, split?, drafts?, extras?, importUnit?, hideEmpty?, hideStatusBar?, hidePanelModeToggle?, … }` | 能力项默认 `false` | 进阶能力。缺省精简：左栏仅导入 / 零件 / 导出 / 快照。未开 `drafts` 时不读不写自动草稿。未开 `importUnit` 时导入不弹单位确认。`hideEmpty` / `hideStatusBar` / `hidePanelModeToggle` 为 `true` 时分别隐藏空画布提示、底栏状态条、零件栏悬浮/通栏切换按钮。 |
 
 
 嵌入预览示例（宿主列表 + 色板 + 自定义导出）：

package/dist/printbench.js

@@ -3303,7 +3303,7 @@ function mI(g, B) {
     o !== w && (r[o] = w);
   };
   for (let b = 0; b < C; b++) {
-    const d = B[b * 3], o = B[b * 3 + 1], w = B[b * 3 + 2], M = g[d * 3], l = g[d * 3 + 1], L = g[d * 3 + 2], m = g[o * 3], H = g[o * 3 + 1], v = g[o * 3 + 2], V = g[w * 3], $ = g[w * 3 + 1], DA = g[w * 3 + 2], IA = m - M, sA = H - l, NA = v - L, EI = V - M, yA = $ - l, gA = DA - L, UA = sA * gA - NA * yA, QA = NA * EI - IA * gA, YA = IA * yA - sA * EI, vA = 0.5 * Math.hypot(UA, QA, YA);
+    const d = B[b * 3], o = B[b * 3 + 1], w = B[b * 3 + 2], M = g[d * 3], l = g[d * 3 + 1], L = g[d * 3 + 2], m = g[o * 3], H = g[o * 3 + 1], v = g[o * 3 + 2], V = g[w * 3], $ = g[w * 3 + 1], DA = g[w * 3 + 2], gA = m - M, sA = H - l, NA = v - L, EI = V - M, yA = $ - l, CA = DA - L, UA = sA * CA - NA * yA, QA = NA * EI - gA * CA, YA = gA * yA - sA * EI, vA = 0.5 * Math.hypot(UA, QA, YA);
     vA < 1e-12 && a++, D += vA, Q += M * UA + l * QA + L * YA;
     for (const [iI, HA] of [[d, o], [o, w], [w, d]]) {
       const XA = rQ(iI, HA);
@@ -3368,7 +3368,7 @@ const VA = Ug("printbench-project", () => {
       const y = KA(i, t), h = H.value[y]?.trim();
       return h || $(i, t);
     })
-  ), IA = AA(
+  ), gA = AA(
     () => A.value.map((i) => {
       if (i.kind === "primary")
         return C.value.find((t) => t.id === i.meshId)?.appearance;
@@ -3379,14 +3379,14 @@ const VA = Ug("printbench-project", () => {
       index: t,
       name: DA.value[t] ?? `零件 ${t + 1}`
     }))
-  ), EI = AA(() => A.value.map((i, t) => gA(t))), yA = AA(() => {
+  ), EI = AA(() => A.value.map((i, t) => CA(t))), yA = AA(() => {
     const i = {};
     return A.value.forEach((t, y) => {
-      const h = gA(y);
+      const h = CA(y);
       h && (i[KA(t, y)] = IC(h));
     }), i;
   });
-  function gA(i) {
+  function CA(i) {
     const t = A.value[i];
     if (!t) return;
     const y = KA(t, i), h = C.value.find((u) => u.id === y);
@@ -3479,7 +3479,7 @@ const VA = Ug("printbench-project", () => {
       }
     };
   }
-  function CA() {
+  function IA() {
     a.value = {
       meshes: C.value.map(cI),
       roots: nA(A.value)
@@ -3544,7 +3544,7 @@ const VA = Ug("printbench-project", () => {
       kind: "primary",
       meshId: j.id,
       transform: [...xA]
-    })), Q.value = [nA(A.value)], D.value = 0, s.value = -1, n.value = [], o.value = [], CA(), await P(), $A();
+    })), Q.value = [nA(A.value)], D.value = 0, s.value = -1, n.value = [], o.value = [], IA(), await P(), $A();
   }
   async function WI(i, t) {
     const y = oA();
@@ -3556,7 +3556,7 @@ const VA = Ug("printbench-project", () => {
         kind: "primary",
         meshId: j.id,
         transform: [...xA]
-      })), Q.value = [nA(A.value)], D.value = 0, s.value = -1, n.value = [], o.value = [], CA(), await P(), $A();
+      })), Q.value = [nA(A.value)], D.value = 0, s.value = -1, n.value = [], o.value = [], IA(), await P(), $A();
     } catch (h) {
       throw y.toast("fail", h instanceof Error ? h.message : "导入失败"), A.value.length && P(), h;
     } finally {
@@ -3713,13 +3713,13 @@ const VA = Ug("printbench-project", () => {
       op: y,
       a: PA(A.value[i]),
       b: PA(A.value[t])
-    }, u = gA(i), q = A.value.filter((j, X) => X !== i && X !== t);
+    }, u = CA(i), q = A.value.filter((j, X) => X !== i && X !== t);
     q.push(h), A.value = q, s.value = q.length - 1, u && (m.value = { ...m.value, [h.id]: [u[0], u[1], u[2]] }), await P();
   }
   async function UI(i) {
     if (i.length < 2) return;
     eA();
-    const t = i.map((q) => PA(A.value[q])), y = A.value.filter((q, j) => !i.includes(j)), h = gA(i[0]), u = OA("merge");
+    const t = i.map((q) => PA(A.value[q])), y = A.value.filter((q, j) => !i.includes(j)), h = CA(i[0]), u = OA("merge");
     y.push({ kind: "merge", id: u, nodes: t }), h && (m.value = { ...m.value, [u]: [h[0], h[1], h[2]] }), A.value = y, s.value = y.length - 1, await P();
   }
   async function YI() {
@@ -3731,7 +3731,7 @@ const VA = Ug("printbench-project", () => {
       oA().toast("info", "当前零件没有可拆分的连通分量");
       return;
     }
-    const h = gA(i);
+    const h = CA(i);
     eA(), A.value.splice(i, 1), y.forEach((u, q) => {
       const j = {
         id: OA("mesh"),
@@ -3829,7 +3829,7 @@ const VA = Ug("printbench-project", () => {
       } catch (wA) {
         return q.toast("fail", wA instanceof Error ? wA.message : "切面拆件失败"), !1;
       }
-      const qA = gA(i), lI = t.length === 1;
+      const qA = CA(i), lI = t.length === 1;
       return eA(), A.value.splice(i, 1), JA.forEach((wA, mA) => {
         const AI = {
           id: OA("mesh"),
@@ -3943,7 +3943,7 @@ const VA = Ug("printbench-project", () => {
     selectedNode: v,
     partNames: DA,
     visibility: vA,
-    appearances: IA,
+    appearances: gA,
     printColors: EI,
     partColorsById: yA,
     partIds: sA,
@@ -3985,7 +3985,7 @@ const VA = Ug("printbench-project", () => {
     setSelectionByPartIds: YA,
     setPartColor: UA,
     applyPartColorsHex: QA,
-    printColorAt: gA,
+    printColorAt: CA,
     snapshot: XI,
     restore: zI,
     tryRestoreDraft: $I,
@@ -4630,6 +4630,8 @@ const lo = {
   extras: !0,
   importUnit: !0,
   hideEmpty: !1,
+  hideStatusBar: !1,
+  hidePanelModeToggle: !1,
   leftPanelMode: "float",
   actionButtons: "icon-text"
 };
@@ -4642,6 +4644,8 @@ function dQ(g) {
     extras: !!g?.extras,
     importUnit: !!g?.importUnit,
     hideEmpty: !!g?.hideEmpty,
+    hideStatusBar: !!g?.hideStatusBar,
+    hidePanelModeToggle: !!g?.hidePanelModeToggle,
     leftPanelMode: g?.leftPanelMode === "dock" ? "dock" : "float",
     actionButtons: g?.actionButtons === "icon" || g?.actionButtons === "text" ? g.actionButtons : "icon-text"
   };
@@ -4872,10 +4876,10 @@ function uQ(g) {
   }
   async function Y() {
     const M = B.fileName.replace(/\.[^.]+$/, "") || "printbench", l = 1 / Sg[n.value], L = B.evaluated.map((V, $) => {
-      const DA = B.pendingDisplayMatrix($), IA = DA ? Ig(V.positions, DA) : V.positions;
+      const DA = B.pendingDisplayMatrix($), gA = DA ? Ig(V.positions, DA) : V.positions;
       return {
         ...V,
-        positions: l === 1 ? IA : Float32Array.from(IA, (sA) => sA * l)
+        positions: l === 1 ? gA : Float32Array.from(gA, (sA) => sA * l)
       };
     }), m = RI(L);
     r.value = 55;
@@ -5021,7 +5025,7 @@ function HQ(g) {
         const NA = await f(l, L);
         H = NA.blob, v = NA.width, V = NA.height, a.value = l;
       }
-      const $ = GQ(B.fileName, l), DA = oC(l), IA = {
+      const $ = GQ(B.fileName, l), DA = oC(l), gA = {
         action: M,
         format: l,
         fileName: $,
@@ -5031,15 +5035,15 @@ function HQ(g) {
         height: V
       };
       if (A.value)
-        return Q.onSnapshot?.(IA), I.toast("ok", `已生成 ${$}`), d(), IA;
+        return Q.onSnapshot?.(gA), I.toast("ok", `已生成 ${$}`), d(), gA;
       if (M === "download")
-        return b(H, $), Q.onSnapshot?.(IA), I.toast("ok", `已下载 ${$}`), d(), IA;
+        return b(H, $), Q.onSnapshot?.(gA), I.toast("ok", `已下载 ${$}`), d(), gA;
       const sA = await tC(
         H,
         { fileName: $, format: l },
         { endpoint: C.value }
       );
-      return Q.onSnapshot?.(IA), I.toast("ok", sA.id ? `已上传 ${$} · ${sA.id}` : `已上传 ${$}`), d(), IA;
+      return Q.onSnapshot?.(gA), I.toast("ok", sA.id ? `已上传 ${$} · ${sA.id}` : `已上传 ${$}`), d(), gA;
     } catch (H) {
       if (H instanceof ug)
         return I.toast("info", H.message), null;
@@ -5885,7 +5889,8 @@ const dA = /* @__PURE__ */ aA({
       }, [
         E("div", $E, [
           E("span", Ai, "零件树 · " + x(k(A).partNames.length), 1),
-          E("button", {
+          g.features.hidePanelModeToggle ? p("", !0) : (R(), U("button", {
+            key: 0,
             class: "panel-toggle",
             type: "button",
             title: g.panelMode === "float" ? "切换为通栏" : "切换为悬浮",
@@ -5897,7 +5902,7 @@ const dA = /* @__PURE__ */ aA({
                 fill: "currentColor"
               }, null, 8, Ci)
             ]))
-          ], 8, Ii),
+          ], 8, Ii)),
           E("button", {
             class: "panel-toggle",
             type: "button",
@@ -5951,7 +5956,7 @@ const dA = /* @__PURE__ */ aA({
               type: "button",
               title: "导入",
               "aria-label": "导入",
-              disabled: g.observe,
+              disabled: g.observe || g.splitMode,
               onClick: o[2] || (o[2] = (w) => C("import"))
             }, [
               r.value ? (R(), U("svg", si, [
@@ -5967,7 +5972,7 @@ const dA = /* @__PURE__ */ aA({
               type: "button",
               title: "导出",
               "aria-label": "导出",
-              disabled: !g.hasModel,
+              disabled: !g.hasModel || g.splitMode,
               onClick: o[3] || (o[3] = (w) => C("export"))
             }, [
               r.value ? (R(), U("svg", ni, [
@@ -5983,7 +5988,7 @@ const dA = /* @__PURE__ */ aA({
               type: "button",
               title: "复原到导入时的状态",
               "aria-label": "复原",
-              disabled: !g.hasModel || g.geomLocked,
+              disabled: !g.hasModel || g.geomLocked || g.splitMode,
               onClick: o[4] || (o[4] = (w) => C("restore"))
             }, [
               r.value ? (R(), U("svg", Mi, [
@@ -5999,7 +6004,7 @@ const dA = /* @__PURE__ */ aA({
               type: "button",
               title: "修复",
               "aria-label": "修复",
-              disabled: !g.hasModel || g.observe,
+              disabled: !g.hasModel || g.observe || g.splitMode,
               onClick: o[5] || (o[5] = (w) => C("repair"))
             }, [
               r.value ? (R(), U("svg", bi, [
@@ -6015,7 +6020,7 @@ const dA = /* @__PURE__ */ aA({
               type: "button",
               title: "复制",
               "aria-label": "复制",
-              disabled: !g.hasModel || !K.value || g.geomLocked,
+              disabled: !g.hasModel || !K.value || g.geomLocked || g.splitMode,
               onClick: o[6] || (o[6] = (w) => k(A).duplicatePart(k(A).selected))
             }, [
               r.value ? (R(), U("svg", Ui, [
@@ -6031,7 +6036,7 @@ const dA = /* @__PURE__ */ aA({
               type: "button",
               title: "删除",
               "aria-label": "删除",
-              disabled: !g.hasModel || !K.value || g.geomLocked,
+              disabled: !g.hasModel || !K.value || g.geomLocked || g.splitMode,
               onClick: e
             }, [
               r.value ? (R(), U("svg", Li, [
@@ -6602,11 +6607,11 @@ const dA = /* @__PURE__ */ aA({
     let f = null;
     const Y = S(!1), J = S(!1), b = S(!1), d = S(-1), o = S("difference"), w = S(1), M = S(!1), l = S(0);
     S(0.5);
-    const L = S(null), m = S([]), H = S(""), v = S(!1), V = S(0), $ = S(null), DA = S({ x: 0, y: 0, z: 0, rx: 0, ry: 0, rz: 0, sx: 1, sy: 1, sz: 1 }), IA = S(!1), sA = S(!0), NA = S("float"), EI = S(!1), yA = S(null), gA = S(null), UA = S(!1), QA = S(!1), YA = S(0), vA = S(0), iI = S(0), HA = S("sphere"), XA = S(0), eA = S(0), wI = S(!1);
+    const L = S(null), m = S([]), H = S(""), v = S(!1), V = S(0), $ = S(null), DA = S({ x: 0, y: 0, z: 0, rx: 0, ry: 0, rz: 0, sx: 1, sy: 1, sz: 1 }), gA = S(!1), sA = S(!0), NA = S("float"), EI = S(!1), yA = S(null), CA = S(null), UA = S(!1), QA = S(!1), YA = S(0), vA = S(0), iI = S(0), HA = S("sphere"), XA = S(0), eA = S(0), wI = S(!1);
     let tA = null, SI = null, zA = !1;
-    const P = AA(() => I.roots.length > 0), _I = AA(() => I.diagnosis?.bbox.min[1] ?? 0), cI = AA(() => I.diagnosis?.bbox.max[1] ?? 10), CA = AA(() => dQ(n.value));
+    const P = AA(() => I.roots.length > 0), _I = AA(() => I.diagnosis?.bbox.min[1] ?? 0), cI = AA(() => I.diagnosis?.bbox.max[1] ?? 10), IA = AA(() => dQ(n.value));
     GA(
-      () => CA.value.leftPanelMode,
+      () => IA.value.leftPanelMode,
       (F) => {
         NA.value = F;
       },
@@ -6632,7 +6637,7 @@ const dA = /* @__PURE__ */ aA({
       onLoaded: () => {
         V.value = I.diagnosis?.bbox.max[1] ?? 0, l.value = I.diagnosis?.bbox.min[1] ?? 0;
       },
-      confirmUnit: () => CA.value.importUnit
+      confirmUnit: () => IA.value.importUnit
     }), { exportOpen: PI, exportFmt: UI, exportUnit: YI, exportProgress: sg, openExport: tg, confirmExport: rg, exportFile: Ng } = uQ({
       onBlocking: (F) => Hg(F),
       onRepair: () => pI()
@@ -6677,7 +6682,7 @@ const dA = /* @__PURE__ */ aA({
     }
     function j() {
       if (e.value) {
-        if (e.value.setGridVisible(C.state.showGrid), e.value.setLights(C.state.showLights), e.value.clipping = v.value, e.value.setClipHeight(V.value), e.value.setTransformSnap(IA.value), e.value.syncMeshes(
+        if (e.value.setGridVisible(C.state.showGrid), e.value.setLights(C.state.showLights), e.value.clipping = v.value, e.value.setClipHeight(V.value), e.value.setTransformSnap(gA.value), e.value.syncMeshes(
           I.evaluated,
           I.partNames,
           I.visibility,
@@ -6717,7 +6722,7 @@ const dA = /* @__PURE__ */ aA({
         C.state.showBbox,
         v.value,
         V.value,
-        IA.value,
+        gA.value,
         FA.value
       ],
       () => j(),
@@ -6852,11 +6857,11 @@ const dA = /* @__PURE__ */ aA({
           }, 80));
         };
       }
-      if (window.addEventListener("keydown", mA), window.addEventListener("keyup", AI), window.addEventListener("beforeunload", () => I.scheduleAutosave()), I.setAutosaveEnabled(CA.value.drafts), !EA.value && CA.value.drafts) {
+      if (window.addEventListener("keydown", mA), window.addEventListener("keyup", AI), window.addEventListener("beforeunload", () => I.scheduleAutosave()), I.setAutosaveEnabled(IA.value.drafts), !EA.value && IA.value.drafts) {
         const c = await iC();
         c?.roots?.length && await A.ask("发现未完成草稿", "检测到上次编辑的项目草稿，是否恢复？") && await I.restore(c);
       }
-      !EA.value && CA.value.extras && !C.state.skipTour && (d.value = 0);
+      !EA.value && IA.value.extras && !C.state.skipTour && (d.value = 0);
       try {
         await I.ensureKernel(), r.onReady?.();
       } catch {
@@ -6870,10 +6875,10 @@ const dA = /* @__PURE__ */ aA({
     function mA(F) {
       if (A.busy) return;
       if (F.key === "Shift" && e.value?.setTransformSnap(!0), (F.ctrlKey || F.metaKey) && F.key.toLowerCase() === "z" && (F.preventDefault(), F.shiftKey ? I.redo() : I.undo()), (F.ctrlKey || F.metaKey) && F.key.toLowerCase() === "y" && (F.preventDefault(), I.redo()), (F.ctrlKey || F.metaKey) && F.key.toLowerCase() === "s") {
-        if (F.preventDefault(), !CA.value.drafts) return;
+        if (F.preventDefault(), !IA.value.drafts) return;
         I.scheduleAutosave(), A.toast("ok", "草稿已保存到本地");
       }
-      if (!(F.target instanceof HTMLElement && ["INPUT", "TEXTAREA", "SELECT"].includes(F.target.tagName)) && F.key.toLowerCase() === "p" && !F.ctrlKey && !F.metaKey && !EA.value && CA.value.extras) {
+      if (!(F.target instanceof HTMLElement && ["INPUT", "TEXTAREA", "SELECT"].includes(F.target.tagName)) && F.key.toLowerCase() === "p" && !F.ctrlKey && !F.metaKey && !EA.value && IA.value.extras) {
         A.setWorkspaceMode(A.workspaceMode === "preview" ? "edit" : "preview");
         return;
       }
@@ -6887,13 +6892,13 @@ const dA = /* @__PURE__ */ aA({
             A.setWorkspaceMode("edit");
             return;
           }
-          e.value?.detachGizmo(), e.value?.clearPreview(), M.value = !1, I.measureMode = "off", m.value = [], H.value = "", e.value?.setMeasureDraft([]), gA.value = null, yA.value = null;
+          e.value?.detachGizmo(), e.value?.clearPreview(), M.value = !1, I.measureMode = "off", m.value = [], H.value = "", e.value?.setMeasureDraft([]), CA.value = null, yA.value = null;
         }
         F.key.toLowerCase() === "f" && !F.ctrlKey && e.value?.fit(), e.value && P.value && !QA.value && !FA.value && I.selected >= 0 && I.selectedIds.length && e.value.attachGizmo(I.selected, I.transformMode);
       }
     }
     function AI(F) {
-      F.key === "Shift" && !IA.value && e.value?.setTransformSnap(!1);
+      F.key === "Shift" && !gA.value && e.value?.setTransformSnap(!1);
     }
     async function LI() {
       RA.value || !P.value || await A.ask("复原模型", "导入之后的修改都会丢掉，模型回到刚导入时的状态。", {
@@ -6916,7 +6921,7 @@ const dA = /* @__PURE__ */ aA({
       UA.value = !1, e.value?.setCompareBefore(null), e.value?.setCompareAfterTint(!1), T ? $.value = null : I.undo(), j();
     }
     function oI() {
-      if (!CA.value.split || RA.value || !P.value || !e.value) return;
+      if (!IA.value.split || RA.value || !P.value || !e.value) return;
       if (QA.value) {
         Mg();
         return;
@@ -6977,7 +6982,7 @@ const dA = /* @__PURE__ */ aA({
         zA = !1;
         return;
       }
-      if (gA.value = null, !e.value || !K.value) return;
+      if (CA.value = null, !e.value || !K.value) return;
       const c = q(F);
       if (QA.value) {
         const kA = e.value.pickSplitPlane(c.nx, c.ny);
@@ -7043,7 +7048,7 @@ const dA = /* @__PURE__ */ aA({
     function MC(F) {
       if (F.preventDefault(), FA.value || !e.value || !K.value) return;
       const c = q(F), T = e.value.pick(c.nx, c.ny)?.index ?? I.selected;
-      gA.value = { x: F.clientX, y: F.clientY, i: T }, I.setSelection([T], F.ctrlKey);
+      CA.value = { x: F.clientX, y: F.clientY, i: T }, I.setSelection([T], F.ctrlKey);
     }
     function hC() {
       const F = m.value;
@@ -7149,7 +7154,7 @@ const dA = /* @__PURE__ */ aA({
       L.value && navigator.clipboard.writeText(L.value), A.toast("ok", "已复制错误信息");
     }
     return GA(
-      () => CA.value.drafts,
+      () => IA.value.drafts,
       (F) => I.setAutosaveEnabled(F),
       { immediate: !0 }
     ), GA(
@@ -7190,11 +7195,11 @@ const dA = /* @__PURE__ */ aA({
         "has-model": P.value,
         nx: DA.value,
         "geom-locked": RA.value,
-        features: CA.value,
+        features: IA.value,
         observe: FA.value,
         "clip-on": v.value,
-        "snap-on": IA.value,
-        "onUpdate:snapOn": c[2] || (c[2] = (N) => IA.value = N),
+        "snap-on": gA.value,
+        "onUpdate:snapOn": c[2] || (c[2] = (N) => gA.value = N),
         "bool-op": o.value,
         "onUpdate:boolOp": c[3] || (c[3] = (N) => o.value = N),
         "bool-b": w.value,
@@ -7218,7 +7223,7 @@ const dA = /* @__PURE__ */ aA({
         onSettings: c[9] || (c[9] = (N) => Y.value = !0),
         onHelp: c[10] || (c[10] = (N) => J.value = !0),
         onSelect: dC,
-        onPartMenu: c[11] || (c[11] = (N) => gA.value = N),
+        onPartMenu: c[11] || (c[11] = (N) => CA.value = N),
         onApplyNumeric: RC,
         onAddPrim: fC,
         onPreviewBool: KC,
@@ -7245,9 +7250,9 @@ const dA = /* @__PURE__ */ aA({
           ref_key: "canvasRef",
           ref: G
         }, null, 512),
-        !P.value && !CA.value.hideEmpty && !EA.value ? (R(), U("div", go, [...c[36] || (c[36] = [
+        !P.value && !IA.value.hideEmpty && !EA.value ? (R(), U("div", go, [...c[36] || (c[36] = [
           E("h2", null, "拖入 GLB / STL / OBJ / 3MF 开始", -1),
-          E("p", null, "也可从网络地址导入。解析在浏览器内完成。导入 → 修复 → 导出可打印文件。", -1),
+          E("p", null, "也可从网络地址导入，解析在浏览器内完成。", -1),
           E("div", { class: "steps" }, [
             E("div", null, [
               E("b", null, "1"),
@@ -7259,7 +7264,7 @@ const dA = /* @__PURE__ */ aA({
             ]),
             E("div", null, [
               E("b", null, "3"),
-              _(" 导出 STL / 3MF")
+              _(" 导出模型")
             ])
           ], -1)
         ])])) : p("", !0),
@@ -7290,7 +7295,7 @@ const dA = /* @__PURE__ */ aA({
           class: "marquee",
           style: Bg({ left: yA.value.x + "px", top: yA.value.y + "px", width: yA.value.w + "px", height: yA.value.h + "px" })
         }, null, 4)) : p("", !0),
-        CA.value.extras && d.value >= 0 ? (R(), U("div", ao, [
+        IA.value.extras && d.value >= 0 ? (R(), U("div", ao, [
           d.value === 0 ? (R(), U("p", eo, "第一步：导入模型。对话框期间先按毫米预览包围盒，确认单位后再缩放。")) : d.value === 1 ? (R(), U("p", Fo, "第二步：点诊断条目飞到缺陷；必要时「修复」并看红绿对拍。")) : (R(), U("p", wo, "第三步：校验通过后导出二进制 STL 或 3MF，交给切片软件（Cura / PrusaSlicer 等）。")),
           E("div", co, [
             E("button", {
@@ -7313,13 +7318,13 @@ const dA = /* @__PURE__ */ aA({
         "active-defect": $.value,
         onFly: Hg
       }, null, 8, ["open", "active-defect"])),
-      EA.value ? p("", !0) : (R(), z($D, { key: 2 })),
-      gA.value && !FA.value ? (R(), z(Io, {
+      !EA.value && !IA.value.hideStatusBar ? (R(), z($D, { key: 2 })) : p("", !0),
+      CA.value && !FA.value ? (R(), z(Io, {
         key: 3,
-        x: gA.value.x,
-        y: gA.value.y,
-        index: gA.value.i,
-        onClose: c[16] || (c[16] = (N) => gA.value = null)
+        x: CA.value.x,
+        y: CA.value.y,
+        index: CA.value.i,
+        onClose: c[16] || (c[16] = (N) => CA.value = null)
       }, null, 8, ["x", "y", "index"])) : p("", !0),
       k(ZI) && k(tI) ? (R(), z($Q, {
         key: 4,
@@ -7336,7 +7341,7 @@ const dA = /* @__PURE__ */ aA({
         onPick: k(ag),
         onImportUrl: k(eg)
       }, null, 8, ["url", "onPick", "onImportUrl"])) : p("", !0),
-      CA.value.importUnit && k(VI) ? (R(), z(vQ, {
+      IA.value.importUnit && k(VI) ? (R(), z(vQ, {
         key: 6,
         "file-name": k(Dg)?.name,
         unit: k(dI),
@@ -7364,23 +7369,23 @@ const dA = /* @__PURE__ */ aA({
         onClose: c[24] || (c[24] = (N) => PI.value = !1),
         onDownload: k(rg)
       }, null, 8, ["format", "unit", "progress", "onDownload"])) : p("", !0),
-      CA.value.extras && Y.value ? (R(), z(YE, {
+      IA.value.extras && Y.value ? (R(), z(YE, {
         key: 9,
         onClose: c[25] || (c[25] = (N) => Y.value = !1)
       })) : p("", !0),
-      CA.value.extras && J.value ? (R(), z(lE, {
+      IA.value.extras && J.value ? (R(), z(lE, {
         key: 10,
         onClose: c[26] || (c[26] = (N) => J.value = !1),
         onReplayTour: c[27] || (c[27] = (N) => d.value = 0)
       })) : p("", !0),
-      CA.value.extras && b.value ? (R(), z(qE, {
+      IA.value.extras && b.value ? (R(), z(qE, {
         key: 11,
         printable: wI.value,
         "onUpdate:printable": c[28] || (c[28] = (N) => wI.value = N),
         onClose: c[29] || (c[29] = (N) => b.value = !1),
         onDownload: SC
       }, null, 8, ["printable"])) : p("", !0),
-      CA.value.drafts && k($I) ? (R(), z(PE, {
+      IA.value.drafts && k($I) ? (R(), z(PE, {
         key: 12,
         name: k(i),
         "onUpdate:name": c[30] || (c[30] = (N) => HI(i) ? i.value = N : null),

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "printbench",
-  "version": "0.4.4",
+  "version": "0.4.5",
   "description": "Browser-based 3D print model workbench (Vue 3 + three.js + Manifold)",
   "type": "module",
   "main": "./dist/printbench.js",