primocode 10.16.0 → 10.17.1

package/editor/helpers/verify_cut.py

@@ -0,0 +1,820 @@
+"""Numeric self-check of a rendered cut. Prints a short PT-BR report and writes
+edit/verify/cut_report.json.
+
+Usage:
+    uv run python helpers/verify_cut.py <edit>/edl.json <edit>/cut.mp4 [--min-silence 0.7] [--ask-approval]
+
+Checks (each problem becomes a FLAG with a timestamp on the cut):
+  DURATION        video/audio/timeline durations and frame counts disagree
+  STALE-TIMELINE  the EDL changed after the render (edl_sig differs) or no timeline found
+  PREVIEW         the file is a low-resolution --preview render
+  SOURCE-MISSING  a source of the EDL cannot be found or its audio cannot be read (edges unchecked)
+  SILENT          the cut has no sound at all
+  CLICK           sample jump at a junction boundary far above the local signal
+  EDGE-IN-SPEECH  a range starts or ends while the source is still sounding (cut inside a word)
+  EDGE-IN-WORD    a range edge falls inside a transcribed word and the gap there is only a
+                  consonant closure (t, k, p): the rest of the word is cut off
+  REPEAT          a range replays speech of the previous range of the same source
+  DEAD-AIR        silence >= --min-silence inside the cut (with a concrete start/end to use)
+  BLACK           black frames
+  CLIPPING        clipped samples or true peak above -1.0 dBTP (ebur128 or the 2-decimal loudnorm reading)
+  LOUDNESS        integrated loudness more than 1.5 LU away from -14 LUFS
+  LOW-LEVEL       a range more than 4 dB under the reference level (speech-weighted median of the
+                  heard range levels), or the farther one (from the reference) of two neighbours, or of
+                  the quietest and loudest ranges, more than 6 dB apart. The message gives the final
+                  gain_db to write in the EDL: it closes the gap between the SOURCE levels (gain_db
+                  works before loudnorm, whose dynamic mode squeezes the gap heard in the cut)
+  HIGH-LEVEL      the same, over the reference level
+Notices that are not flags (HDR source, crop without a face) go to "warnings".
+
+state.json: when the file is the cut of the edit dir, verify asks for the approval
+(awaiting approval_cut) only when there are no flags, or with --ask-approval after the flags
+were explained. Otherwise awaiting stays null.
+Exit code 0 even with flags; 2 when the EDL or the video cannot be read.
+"""
+
+from __future__ import annotations
+
+import argparse
+import json
+import math
+import re
+import subprocess
+import sys
+from concurrent.futures import ThreadPoolExecutor
+from pathlib import Path
+
+import numpy as np
+
+from common import OUTPUT_FORMATS, file_signature, fmt_time, load_json, now_iso, probe_video, save_json
+from contact_sheet import abspath, find_timeline
+
+SR = 48000
+TARGET_I = -14.0
+TRUE_PEAK_LIMIT = -1.0
+LEVEL_DELTA_DB = 4.0
+ADJACENT_JUMP_DB = 6.0
+GAIN_CAP_DB = 12.0
+CLICK_RATIO = 12.0
+CLICK_MIN_JUMP = 0.02
+EDGE_FLOOR_DB = -50.0
+EDGE_ABOVE_NOISE_DB = 15.0  # an edge is on speech only this far above the source's own noise floor:
+                            # breath tails and room hiss 10 dB over the floor flooded the report, and
+                            # a report full of false alarms got real cut words ignored (Criativo 01)
+WORD_MARGIN_S = 0.08      # the quiet run must sit at least this far inside the word on both sides
+WORD_GAP_MAX_S = 0.12     # a quiet run shorter than this around the edge is a closure, not a pause
+WORD_REACH_S = 0.15       # sound must exist on both sides within this distance
+SILENT_DB = -60.0
+SEAMLESS_S = 0.02         # next range restarts the source this close to where the previous ended
+BLOCKS_APPROVAL = {"STALE-TIMELINE", "DURATION", "PREVIEW"}
+
+
+def db(x: float) -> float:
+    return 20 * math.log10(max(float(x), 1e-9))
+
+
+def decode_audio(path: Path, start: float = 0.0, dur: float | None = None, mono: bool = True,
+                 af: str | None = None) -> np.ndarray:
+    cmd = ["ffmpeg", "-v", "error", "-nostdin"]
+    if start > 0:
+        cmd += ["-ss", f"{start:.6f}"]
+    cmd += ["-i", str(path)]
+    if dur is not None:
+        cmd += ["-t", f"{dur:.6f}"]
+    if af:
+        cmd += ["-af", af]
+    cmd += ["-vn", "-ac", "1" if mono else "2", "-ar", str(SR), "-f", "f32le", "-"]
+    proc = subprocess.run(cmd, capture_output=True)
+    if proc.returncode != 0:
+        return np.zeros(0 if mono else (0, 2), dtype=np.float32)
+    data = np.frombuffer(proc.stdout, dtype=np.float32)
+    return data if mono else data.reshape(-1, 2)
+
+
+def rms_frames(x: np.ndarray, win_s: float) -> np.ndarray:
+    win = max(1, int(win_s * SR))
+    n = x.size // win
+    if n == 0:
+        return np.zeros(0)
+    return np.sqrt(np.mean(x[: n * win].reshape(n, win) ** 2, axis=1))
+
+
+def power_mean_db(values_db: np.ndarray) -> float:
+    return float(10 * np.log10(np.mean(10 ** (values_db / 10)))) if values_db.size else -120.0
+
+
+def weighted_median(values: list[float], weights: list[float]) -> float:
+    """Level that half of the speech time sits at or above (ties go to the louder level)."""
+    pairs = sorted(zip(values, weights), key=lambda p: -p[0])
+    total = sum(max(w, 1e-6) for _, w in pairs)
+    acc = 0.0
+    for v, w in pairs:
+        acc += max(w, 1e-6)
+        if acc >= total / 2 - 1e-9:
+            return v
+    return pairs[-1][0]
+
+
+def ffmpeg_stderr(cmd: list[str]) -> str:
+    return subprocess.run(cmd, capture_output=True, text=True).stderr
+
+
+def fmt_db(value: float | None) -> str:
+    return "--" if value is None else f"{value:.1f}"
+
+
+# ------------------------------------------------------------------ checks
+
+
+def loudness_stats(video: Path) -> dict:
+    err = ffmpeg_stderr(["ffmpeg", "-hide_banner", "-nostats", "-nostdin", "-i", str(video), "-vn",
+                         "-af", "ebur128=peak=true:framelog=quiet", "-f", "null", "-"])
+    tail = err[err.rfind("Summary:"):] if "Summary:" in err else err
+
+    def grab(pattern: str) -> float | None:
+        m = re.search(pattern, tail)
+        if not m:
+            return None
+        return -120.0 if "inf" in m.group(1) else float(m.group(1))
+
+    return {"integrated": grab(r"I:\s+(-?inf|-?[\d.]+) LUFS"), "lra": grab(r"LRA:\s+(-?inf|-?[\d.]+) LU"),
+            "true_peak": grab(r"Peak:\s+(-?inf|-?[\d.]+) dBFS")}
+
+
+def black_frames(video: Path) -> tuple[list[dict], int]:
+    """Black intervals and the number of frames that really decode (full decode pass)."""
+    proc = subprocess.run(["ffmpeg", "-hide_banner", "-nostats", "-nostdin", "-i", str(video), "-an",
+                           "-vf", "scale=180:-2,blackdetect=d=0.08:pic_th=0.97:pix_th=0.10",
+                           "-progress", "pipe:1", "-f", "null", "-"], capture_output=True, text=True)
+    out = []
+    for m in re.finditer(r"black_start:(-?[\d.]+) black_end:(-?[\d.]+) black_duration:([\d.]+)", proc.stderr):
+        out.append({"start": float(m.group(1)), "end": float(m.group(2)), "duration": float(m.group(3))})
+    decoded = [int(x) for x in re.findall(r"^frame=(\d+)", proc.stdout, flags=re.M)]
+    return out, (decoded[-1] if decoded else 0)
+
+
+def dead_air(mono: np.ndarray, noise_db: float, min_silence: float) -> list[dict]:
+    """Silence runs >= min_silence on 20 ms RMS windows (a 3-window median ignores single bumps).
+
+    ffmpeg's silencedetect tests every sample's amplitude, so room noise peaks split real pauses
+    into short pieces after loudness normalization; RMS windows measure what the ear hears.
+    """
+    win = int(0.02 * SR)
+    n = mono.size // win
+    if n < 3:
+        return []
+    vals = 20 * np.log10(np.maximum(np.sqrt(np.mean(mono[: n * win].reshape(n, win) ** 2, axis=1)), 1e-9))
+    smooth = np.median(np.stack([np.r_[vals[:1], vals[:-1]], vals, np.r_[vals[1:], vals[-1:]]]), axis=0)
+    quiet = smooth < noise_db
+    out, i = [], 0
+    while i < n:
+        if not quiet[i]:
+            i += 1
+            continue
+        j = i
+        while j < n and quiet[j]:
+            j += 1
+        a, b = i * 0.02, min(j * 0.02, mono.size / SR)
+        if b - a >= min_silence - 1e-3:
+            out.append({"start": round(a, 3), "end": round(b, 3), "duration": round(b - a, 3)})
+        i = j
+    return out
+
+
+def click_probe(audio: np.ndarray, t: float) -> dict:
+    """Max first-difference in +-10 ms around t vs the RMS of the first difference in +-300 ms."""
+    c = int(round(t * SR))
+    lo, hi = max(1, c - int(0.3 * SR)), min(audio.shape[0], c + int(0.3 * SR))
+    if hi - lo < int(0.05 * SR):
+        return {"jump": 0.0, "ratio": 0.0}
+    seg = audio[lo - 1:hi]
+    d = np.abs(np.diff(seg, axis=0))
+    if d.ndim == 2:
+        d = d.max(axis=1)
+    k0, k1 = max(0, c - lo - int(0.01 * SR)), min(d.size, c - lo + int(0.01 * SR))
+    near = d[k0:k1]
+    mask = np.ones(d.size, dtype=bool)
+    mask[k0:k1] = False
+    base = float(np.sqrt(np.mean(d[mask] ** 2))) if mask.any() else 0.0
+    jump = float(near.max()) if near.size else 0.0
+    return {"jump": round(jump, 5), "ratio": round(jump / max(base, 1e-5), 2)}
+
+
+def loudest_channel(x: np.ndarray) -> np.ndarray:
+    """Stereo -> the louder channel (a phase-cancelled pair would vanish in an L+R mix)."""
+    if x.ndim == 1 or x.shape[0] == 0:
+        return x.reshape(-1)
+    return x[:, int(np.argmax(np.mean(x ** 2, axis=0)))]
+
+
+RUMBLE_AF = "highpass=f=300,highpass=f=300"   # same filter as bordas_precisas: car, road, AC rumble out
+RUMBLE_RANGE_DB = 20.0                         # a source whose voice stands less than this over its floor
+
+
+def noise_floor_db(src: Path) -> tuple[float | None, str | None]:
+    """(room noise of a whole source, audio filter its edges are measured with). The floor is the 10th
+    percentile of the 10 ms level of the louder channel. A source with rumble (voice less than
+    RUMBLE_RANGE_DB over the floor) is measured without the lows, or the rumble reads as speech at every edge."""
+    for af in (None, RUMBLE_AF):
+        x = loudest_channel(decode_audio(src, mono=False, af=af))
+        vals = rms_frames(x, 0.01)
+        if not vals.size:
+            return None, None
+        lo, hi = db(np.percentile(vals, 10)), db(np.percentile(vals, 90))
+        if hi - lo >= RUMBLE_RANGE_DB or af:
+            return float(lo), af
+    return None, None
+
+
+def edge_probe(src: Path, t_edge: float, side: str, ref_db: float, floor_db: float | None = None,
+               af: str | None = None) -> dict:
+    """Level just inside and just outside a source cut edge (40 ms each)."""
+    w = 0.04
+    x = loudest_channel(decode_audio(src, max(0.0, t_edge - w), 2 * w, mono=False, af=af))
+    half = x.size // 2
+    before = db(np.sqrt(np.mean(x[:half] ** 2))) if half else -120.0
+    after = db(np.sqrt(np.mean(x[half:] ** 2))) if x.size - half > 0 else -120.0
+    inside, outside = (after, before) if side == "start" else (before, after)
+    gate = max(ref_db - 20.0, EDGE_FLOOR_DB,
+               floor_db + EDGE_ABOVE_NOISE_DB if floor_db is not None else EDGE_FLOOR_DB)
+    return {"inside_db": round(inside, 1), "outside_db": round(outside, 1), "gate_db": round(gate, 1),
+            "in_speech": bool(inside > gate and outside > gate and t_edge > w)}
+
+
+def word_at(transcript: dict | None, t: float) -> dict | None:
+    if not transcript:
+        return None
+    for w in transcript.get("words", []):
+        if float(w.get("start", 0)) < t < float(w.get("end", 0)):
+            return w
+    return None
+
+
+def word_edge_probe(src: Path, t_edge: float, ref_db: float, transcript: dict | None,
+                    af: str | None = None) -> dict | None:
+    """Edge inside a transcribed word: is the quiet run around it only a consonant closure?
+
+    A stop consonant (t, k, p) makes 50-60 ms of near silence inside a word, so the 40 ms level
+    probe reads one side as quiet. Here the 10 ms level shows a quiet run shorter than
+    WORD_GAP_MAX_S with sound on both sides, and that run sits inside a transcribed word with
+    WORD_MARGIN_S of the word on each side: the word goes on past the edge. A pause between
+    words is longer, or lies at a word boundary (Whisper word starts drift into short pauses,
+    hence the margin). Calibrated on the test footage: 90% of mid-word edges caught, no hit on
+    pause edges with the SKILL padding nor on the edges of the real sessions.
+    """
+    w = word_at(transcript, t_edge)
+    if w is None:
+        return None
+    t0 = max(0.0, t_edge - WORD_REACH_S)
+    x = loudest_channel(decode_audio(src, t0, t_edge + WORD_REACH_S - t0, mono=False, af=af))
+    vals = np.array([db(v) for v in rms_frames(x, 0.01)])
+    if vals.size < 4:
+        return None
+    gate = max(ref_db - 20.0, EDGE_FLOOR_DB)
+    loud = vals > gate
+    c = min(max(int((t_edge - t0) / 0.01), 0), vals.size - 1)
+    lo = hi = c
+    if not loud[c]:
+        while lo > 0 and not loud[lo - 1]:
+            lo -= 1
+        while hi < vals.size - 1 and not loud[hi + 1]:
+            hi += 1
+        gap = (hi - lo + 1) * 0.01
+    else:
+        gap = 0.0
+    g0, g1 = t0 + lo * 0.01, t0 + (hi + 1) * 0.01
+    hit = bool(gap < WORD_GAP_MAX_S and loud[:lo].any() and loud[hi + 1:].any()
+               and float(w["start"]) + WORD_MARGIN_S <= g0 and g1 <= float(w["end"]) - WORD_MARGIN_S)
+    return {"word": str(w.get("text", "")).strip(), "word_start": float(w["start"]), "word_end": float(w["end"]),
+            "gap_s": round(gap, 2), "in_word": hit}
+
+
+# ------------------------------------------------------------------ state
+
+
+def update_state(edit_dir: Path, video: Path, flags: list[dict], ask_approval: bool) -> tuple[str | None, bool | None]:
+    """Ask for the approval of the cut in state.json only after this check.
+
+    Returns (PT-BR line, approval requested) or (None, None) when the video is not the cut of the edit dir."""
+    state_path = edit_dir / "state.json"
+    state = load_json(state_path, default={}) or {}
+    if not isinstance(state, dict):
+        state = {}
+    if video.parent != edit_dir or video.name != (state.get("cut_video") or "cut.mp4"):
+        return None, None
+    blocking = sorted({f["code"] for f in flags if f["code"] in BLOCKS_APPROVAL})
+    ready = not blocking and (not flags or ask_approval)
+    if ready:
+        state.update(phase="cut", awaiting="approval_cut",
+                     message="Corte pronto. Assista e aprove ou marque o que mudar.")
+        line = "Preview: aprovação do corte pedida."
+    else:
+        n = len(flags)
+        state.update(phase="cut", awaiting=None,
+                     message=f"Conferindo o corte: {n} {'ponto' if n == 1 else 'pontos'} para ajustar antes de mostrar.")
+        if blocking:
+            line = f"Preview: aprovação NÃO pedida ({', '.join(blocking)}): renderize de novo."
+        else:
+            line = ("Preview: aprovação ainda não pedida. Corrija e renderize de novo, ou rode com "
+                    "--ask-approval depois de explicar os avisos que vão ficar.")
+    state["updated_at"] = now_iso()
+    save_json(state_path, state)
+    return line, ready
+
+
+# ------------------------------------------------------------------ main
+
+
+def verify(edl_path: Path, video: Path, min_silence: float) -> tuple[dict, list[str]]:
+    from render_cut import ASPECT_WARN, edl_signature, resolve_source, true_peak_db
+
+    edl = load_json(edl_path)
+    edit_dir = edl_path.parent
+    info = probe_video(video)
+    if not info.get("has_video") or not info.get("duration"):
+        raise ValueError("o vídeo não tem imagem ou duração")
+    flags: list[dict] = []
+    warnings: list[str] = []
+
+    def flag(code: str, t: float | None, message: str, rid: str | None = None, end: float | None = None) -> None:
+        item = {"code": code, "time": None if t is None else round(t, 3), "message": message}
+        if end is not None:
+            item["end"] = round(end, 3)
+        if rid:
+            item["range"] = rid
+        flags.append(item)
+
+    # ---- duration vs timeline
+    tl_path = find_timeline(video)
+    if tl_path is None and (edit_dir / "cut_timeline.json").exists():
+        tl_path = edit_dir / "cut_timeline.json"
+    timeline = load_json(tl_path) if tl_path else None
+    fps = float((timeline or {}).get("fps") or info.get("fps") or 30)
+    streams = json.loads(subprocess.run(
+        ["ffprobe", "-v", "error", "-show_entries", "stream=codec_type,duration,nb_frames", "-of", "json", str(video)],
+        capture_output=True, text=True).stdout or "{}").get("streams", [])
+    v_dur = next((float(s.get("duration") or 0) for s in streams if s.get("codec_type") == "video"), info["duration"])
+    a_dur = next((float(s.get("duration") or 0) for s in streams if s.get("codec_type") == "audio"), None)
+    v_frames = next((int(s.get("nb_frames") or 0) for s in streams if s.get("codec_type") == "video"), 0)
+    dur_info = {"video": round(v_dur, 3), "audio": None if a_dur is None else round(a_dur, 3), "frames": v_frames,
+                "fps": fps}
+
+    if timeline:
+        segs = timeline.get("segments") or []
+        dur_info.update(timeline=timeline.get("duration"), timeline_frames=timeline.get("frames"))
+        if timeline.get("edl_sig") and edl_signature(edl) != timeline["edl_sig"]:
+            flag("STALE-TIMELINE", None, "o EDL mudou depois do render: renderize de novo antes de aprovar")
+        if abs(v_dur - float(timeline.get("duration") or 0)) > 1.0 / fps + 1e-3:
+            flag("DURATION", v_dur, f"vídeo tem {v_dur:.3f}s e o timeline diz {float(timeline['duration']):.3f}s")
+        if timeline.get("frames") and v_frames and int(timeline["frames"]) != v_frames:
+            flag("DURATION", None, f"vídeo tem {v_frames} quadros e o timeline diz {timeline['frames']}")
+    else:
+        flag("STALE-TIMELINE", None, "timeline não encontrado: medições por trecho usam a conta do EDL")
+        segs, pos = [], 0.0
+        for r in edl.get("ranges", []):
+            d = float(r["end"]) - float(r["start"])
+            segs.append({"id": r.get("id"), "source": r["source"], "src_start": float(r["start"]),
+                         "src_end": float(r["end"]), "out_start": pos, "out_end": pos + d,
+                         "audio_out_start": pos, "audio_out_end": pos + d, "audio_src_start": float(r["start"])})
+            pos += d
+    if a_dur is None:
+        flag("DURATION", None, "o corte não tem áudio")
+    elif abs(a_dur - v_dur) > 0.05:
+        flag("DURATION", v_dur, f"áudio ({a_dur:.3f}s) e vídeo ({v_dur:.3f}s) com durações diferentes")
+
+    # ---- preview render (half resolution) passing as the approval file
+    out_cfg = edl.get("output") or {}
+    fmt_wh = OUTPUT_FORMATS.get(out_cfg.get("format") or "vertical", (0, 0))
+    want_w, want_h = int(out_cfg.get("width") or fmt_wh[0]), int(out_cfg.get("height") or fmt_wh[1])
+    got_w, got_h = int(info.get("display_width") or 0), int(info.get("display_height") or 0)
+    if (timeline or {}).get("preview") or (want_w and got_w and (got_w < want_w - 2 or got_h < want_h - 2)):
+        flag("PREVIEW", None, f"prévia em baixa resolução ({got_w}x{got_h}, o EDL pede {want_w}x{want_h}): "
+             "renderize sem --preview antes de pedir aprovação")
+
+    # ---- full decode: black frames + how many frames really decode
+    blacks, decoded_frames = black_frames(video)
+    dur_info["decoded_frames"] = decoded_frames
+    if decoded_frames == 0:
+        raise ValueError("nenhum quadro decodifica (arquivo incompleto ou corrompido)")
+    if v_frames and decoded_frames < v_frames - 1:
+        flag("DURATION", decoded_frames / fps, f"só {decoded_frames} de {v_frames} quadros decodificam: "
+             "arquivo incompleto ou corrompido, renderize de novo")
+
+    # ---- audio decode (stereo for peaks/clicks, mono mix for levels)
+    stereo = decode_audio(video, mono=False) if a_dur else np.zeros((0, 2), dtype=np.float32)
+    mono = stereo.mean(axis=1) if stereo.size else np.zeros(0, dtype=np.float32)
+    if a_dur and stereo.shape[0] < (a_dur - 0.1) * SR:
+        flag("DURATION", stereo.shape[0] / SR, f"só {stereo.shape[0] / SR:.2f}s de {a_dur:.2f}s de áudio "
+             "decodificam: arquivo incompleto ou corrompido")
+
+    loud = loudness_stats(video) if a_dur else {}
+    peak = float(np.abs(stereo).max()) if stereo.size else 0.0
+    clipped = int((np.abs(stereo) >= 0.999).sum()) if stereo.size else 0
+    # ebur128 prints the true peak with 1 decimal (-0.96 reads -1.0); the loudnorm reading used by
+    # render_cut's peak guard has 2. Either one above the limit is a flag.
+    loud.update(sample_peak_db=round(db(peak), 2), clipped_samples=clipped,
+                true_peak_loudnorm=true_peak_db(video) if a_dur else None)
+    silent = a_dur is not None and (db(peak) < SILENT_DB or (loud.get("integrated") is not None
+                                                               and loud["integrated"] <= -69.0))
+    if silent:
+        flag("SILENT", None, "o corte está sem som: confira se as fontes têm áudio")
+    if clipped > 2:
+        flag("CLIPPING", float(np.argmax(np.abs(stereo).max(axis=1) >= 0.999)) / SR,
+             f"{clipped} amostras estouradas (clipping)")
+    tp_worst = max((v for v in (loud.get("true_peak"), loud.get("true_peak_loudnorm")) if v is not None), default=None)
+    if not silent and tp_worst is not None and tp_worst > TRUE_PEAK_LIMIT:
+        flag("CLIPPING", None, f"pico real {tp_worst:.2f} dBTP, acima de {TRUE_PEAK_LIMIT:.1f}: "
+             "renderize de novo (o render baixa o volume para caber)")
+    if not silent and loud.get("integrated") is not None and abs(loud["integrated"] - TARGET_I) > 1.5:
+        flag("LOUDNESS", None, f"loudness {loud['integrated']:.1f} LUFS, alvo {TARGET_I:.0f}")
+
+    # ---- speech reference and adaptive silence threshold
+    frames_db = np.array([db(v) for v in rms_frames(mono, 0.05)]) if mono.size else np.zeros(0)
+    speech_ref = float(np.percentile(frames_db, 90)) if frames_db.size else -20.0
+    floor_db = float(np.percentile(frames_db, 10)) if frames_db.size else -60.0
+    noise_db = min(-20.0, max(floor_db + 10.0, speech_ref - 25.0))
+
+    # ---- junction click probe
+    junctions = []
+    for a, b in zip(segs, segs[1:]):
+        probes = [click_probe(stereo, float(b["out_start"]))]
+        if float(b.get("audio_out_start", b["out_start"])) < float(b["out_start"]) - 1e-6:
+            probes.append(click_probe(stereo, float(b["audio_out_start"])))
+        worst = max(probes, key=lambda p: p["ratio"])
+        click = worst["ratio"] > CLICK_RATIO and worst["jump"] > CLICK_MIN_JUMP
+        junctions.append({"time": round(float(b["out_start"]), 3), "between": [a["id"], b["id"]], **worst,
+                          "click": click})
+        if click:
+            flag("CLICK", float(b["out_start"]), f"estalo na junção {a['id']} -> {b['id']} "
+                 f"(salto {worst['jump']:.3f}, {worst['ratio']:.0f}x o normal)", b["id"])
+    if segs and stereo.size and not silent:
+        for t, label in ((0.0, "início"), (v_dur, "fim")):
+            p = click_probe(stereo, min(max(t, 0.012), v_dur - 0.012))
+            if p["ratio"] > CLICK_RATIO and p["jump"] > CLICK_MIN_JUMP:
+                flag("CLICK", t, f"estalo no {label} do vídeo")
+
+    # ---- sources: resolved like render_cut, probed once
+    sources = edl.get("sources") or {}
+    src_info: dict[str, dict] = {}
+    for key in dict.fromkeys(s["source"] for s in segs):
+        value = sources.get(key)
+        if not value:
+            flag("SOURCE-MISSING", None, f"a fonte {key!r} não está em \"sources\" do EDL: bordas não conferidas")
+            continue
+        path = resolve_source(str(value), edit_dir)
+        if not path.exists():
+            flag("SOURCE-MISSING", None, f"a fonte {key} não foi encontrada ({path}): as bordas dos trechos dela "
+                 "não foram conferidas. Corrija o caminho no EDL")
+            continue
+        try:
+            pinfo = probe_video(path)
+        except Exception:  # noqa: BLE001
+            flag("SOURCE-MISSING", None, f"não consegui ler a fonte {key} ({path.name}): bordas não conferidas")
+            continue
+        sig = file_signature(path)
+        tr = load_json(edit_dir / "transcripts" / f"{path.stem}.json")
+        if isinstance(tr, dict) and tr.get("source_sig") and tr["source_sig"] != sig:
+            tr = None        # the source changed after the transcription: word times are not trustworthy
+        reg = load_json(edit_dir / "regions" / f"{path.stem}.json")
+        speech = ([[float(a), float(b)] for a, b in reg["speech"]]
+                  if isinstance(reg, dict) and isinstance(reg.get("speech"), list)
+                  and reg.get("source_sig") in (None, sig) and "start" not in reg else None)
+        src_info[key] = {"path": path, "info": pinfo, "transcript": tr if isinstance(tr, dict) else None,
+                         "speech": speech}
+        src_info[key]["floor"], src_info[key]["af"] = noise_floor_db(path) if pinfo.get("has_audio") else (None, None)
+        if pinfo.get("is_hdr"):
+            warnings.append(f"fonte HDR ({key}): as cores foram convertidas para SDR. Confira a cor no preview "
+                            "e, nos próximos vídeos, grave com o HDR do celular desligado.")
+    for s in segs:
+        crop = s.get("crop") if isinstance(s.get("crop"), dict) else None
+        if crop and crop.get("focus_from") == "centro" and float(crop.get("kept") or 1) < 1 / ASPECT_WARN:
+            warnings.append(f"trecho {s['id']}: a imagem foi cortada no centro ({float(crop['kept']):.0%} guardado) "
+                            "sem rosto encontrado. Confira o enquadramento; ajuste focus_x/focus_y no trecho.")
+
+    # ---- cut edges inside speech or inside a word (source side)
+    edge_jobs = []
+    for s in segs:
+        si = src_info.get(s["source"])
+        if si is None or not si["info"].get("has_audio"):
+            continue
+        a0 = float(s.get("audio_src_start", s["src_start"]))
+        a1 = float(s["src_end"])
+        edge_jobs.append((s, si, a0, a1))
+
+    def edges_for(job):
+        s, si, a0, a1 = job
+        src = si["path"]
+        body = loudest_channel(decode_audio(src, a0, a1 - a0, mono=False))
+        if body.size == 0:
+            return s, si, None
+        body_db = np.array([db(v) for v in rms_frames(body, 0.05)])
+        ref = float(np.percentile(body_db, 90)) if body_db.size else -20.0
+        active = body_db[body_db > ref - 20.0]
+        src_level = power_mean_db(active) if active.size >= 4 else None     # the voice level: unfiltered
+        edge_ref = ref
+        if si.get("af"):          # the edge gates read the same filtered audio the edge probes read
+            fb = loudest_channel(decode_audio(src, a0, a1 - a0, mono=False, af=si["af"]))
+            fdb = np.array([db(v) for v in rms_frames(fb, 0.05)])
+            edge_ref = float(np.percentile(fdb, 90)) if fdb.size else ref
+        probes = {side: (edge_probe(src, t, side, edge_ref, si.get("floor"), si.get("af")),
+                          word_edge_probe(src, t, edge_ref, si["transcript"], si.get("af")))
+                  for side, t in (("start", a0), ("end", a1))}
+        return s, si, (ref, src_level, probes)
+
+    # a range that picks up where the previous one of the same source stopped plays as one take
+    seamless: set[tuple[str, str]] = set()
+    for a, b in zip(segs, segs[1:]):
+        if a["source"] == b["source"] and \
+                abs(float(b.get("audio_src_start", b["src_start"])) - float(a["src_end"])) <= SEAMLESS_S:
+            seamless |= {(a["id"], "end"), (b["id"], "start")}
+
+    edges = []
+    source_levels: dict[str, float | None] = {}
+    gains = {str(r.get("id")): float(r.get("gain_db") or 0.0) for r in edl.get("ranges", [])}
+    # corte_por_onda.py ended these ranges in the valley between two words said together: the next word's attack
+    # is right there, so "still sounding" at that end is expected (the transcription of the cut is the check)
+    valley_ends = {str(r.get("id")) for r in edl.get("ranges", []) if r.get("fim_no_vale")}
+    unreadable: set[str] = set()
+    with ThreadPoolExecutor(max_workers=4) as pool:
+        for s, si, result in pool.map(edges_for, edge_jobs):
+            if result is None:
+                if s["source"] not in unreadable:
+                    unreadable.add(s["source"])
+                    flag("SOURCE-MISSING", None, f"não consegui ler o áudio da fonte {s['source']} "
+                         f"({si['path'].name}): as bordas dos trechos dela não foram conferidas")
+                continue
+            ref, src_level, probes = result
+            source_levels[s["id"]] = None if src_level is None else src_level + gains.get(str(s["id"]), 0.0)
+            for side, t_src, t_out in (("start", float(s.get("audio_src_start", s["src_start"])),
+                                        float(s.get("audio_out_start", s["out_start"]))),
+                                       ("end", float(s["src_end"]), float(s["out_end"]))):
+                e, wp = probes[side]
+                if (s["id"], side) in seamless:   # the audio runs on into the next range: no cut heard
+                    e = {**e, "in_speech": False}
+                    wp = None
+                if side == "end" and str(s["id"]) in valley_ends:
+                    e = {**e, "in_speech": False, "fim_no_vale": True}
+                    wp = None
+                in_word = bool(wp and wp["in_word"])
+                edges.append({"range": s["id"], "side": side, "src_time": round(t_src, 3), "out_time": round(t_out, 3),
+                              **e, "word": wp["word"] if wp else None, "in_word": in_word,
+                              "word_gap_s": wp["gap_s"] if wp else None})
+                what = "start" if side == "start" else "end"
+                where = "começa" if side == "start" else "termina"
+                if e["in_speech"]:
+                    extra = f" na palavra \"{wp['word']}\"" if wp else ""
+                    flag("EDGE-IN-SPEECH", t_out, f"{s['id']} {where} com som ainda saindo{extra} "
+                         f"(fonte {t_src:.2f}s, {e['inside_db']:.0f}/{e['outside_db']:.0f} dB): ajuste o "
+                         f"{what} para uma pausa", s["id"])
+                elif in_word:
+                    edge_to = wp["word_start"] if side == "start" else wp["word_end"]
+                    flag("EDGE-IN-WORD", t_out, f"{s['id']} {where} no meio da palavra \"{wp['word']}\" "
+                         f"(fonte {t_src:.2f}s, palavra {wp['word_start']:.2f}-{wp['word_end']:.2f}s): mova o "
+                         f"{what} para perto de {edge_to:.2f}s e confira no speech_regions.py", s["id"])
+
+    # ---- the same speech played twice (consecutive ranges of one source that overlap)
+    for a, b in zip(segs, segs[1:]):
+        if a["source"] != b["source"]:
+            continue
+        a0, a1 = float(a.get("audio_src_start", a["src_start"])), float(a["src_end"])
+        b0, b1 = float(b.get("audio_src_start", b["src_start"])), float(b["src_end"])
+        overlap = min(a1, b1) - max(a0, b0)
+        if b0 < a1 and overlap > 1.0 / fps + 0.005:
+            flag("REPEAT", float(b.get("audio_out_start", b["out_start"])),
+                 f"{b['id']} repete {overlap:.2f}s da fala de {a['id']} (mesma fonte, {max(a0, b0):.2f}-"
+                 f"{min(a1, b1):.2f}s): mova o start de {b['id']} para {a1:.2f}s ou mais, ou encurte o end de {a['id']}",
+                 b["id"])
+
+    # ---- dead air, placed on each range's own audio span (up to where the next range's audio starts)
+    def own_span(i: int) -> tuple[float, float]:
+        s = segs[i]
+        a = float(s.get("audio_out_start", s["out_start"]))
+        b = float(s["out_end"])
+        if i + 1 < len(segs):
+            b = min(b, float(segs[i + 1].get("audio_out_start", segs[i + 1]["out_start"])))
+        return a, b
+
+    def to_src(i: int, t_out: float) -> float:
+        s = segs[i]
+        return float(s.get("audio_src_start", s["src_start"])) + (t_out - float(s.get("audio_out_start", s["out_start"])))
+
+    def src_speech(i: int) -> list[list[float]] | None:
+        return (src_info.get(segs[i]["source"]) or {}).get("speech")
+
+    def new_end_for(i: int, t_out: float) -> float:
+        """Where the speech before a silence ends in the source (regions/<stem>.json), plus 0.15 s.
+        The cut's own silence starts late on soft word endings, so the regions win when present."""
+        t = to_src(i, t_out)
+        ends = [b for a, b in (src_speech(i) or []) if t - 1.0 < b <= t + 0.3]
+        return (max(ends) if ends else t) + 0.15
+
+    def new_start_for(i: int, t_out: float) -> float:
+        """Where the speech after a silence starts in the source, minus 0.10 s (soft onsets like 'g'
+        are heard in the cut later than they start)."""
+        t = to_src(i, t_out)
+        starts = [a for a, b in (src_speech(i) or []) if t - 0.3 <= a < t + 1.0]
+        return (min(starts) if starts else t - 0.15) - 0.10
+
+    silences = dead_air(mono, noise_db, min_silence) if mono.size and not silent else []
+    for sil in silences:
+        over = [i for i in range(len(segs)) if min(own_span(i)[1], sil["end"]) - max(own_span(i)[0], sil["start"]) > 0.02]
+        mid = (sil["start"] + sil["end"]) / 2
+        rid = next((s["id"] for s in segs if float(s["out_start"]) <= mid < float(s["out_end"])), None)
+        sil["range"] = rid
+        new_end = lambda i: new_end_for(i, sil["start"])  # noqa: E731
+        new_start = lambda i: new_start_for(i, sil["end"])  # noqa: E731
+        if not over:
+            msg = "encurte a pausa"
+        elif len(over) >= 2:
+            i, j = over[0], over[-1]
+            msg = (f"na junção {segs[i]['id']} -> {segs[j]['id']}: encurte o end de {segs[i]['id']} para "
+                   f"{new_end(i):.2f}s e/ou mova o start de {segs[j]['id']} para {new_start(j):.2f}s")
+        else:
+            i = over[0]
+            a, b = own_span(i)
+            sid = segs[i]["id"]
+            if sil["end"] >= b - 0.1:
+                where = "no fim do vídeo" if sil["end"] >= v_dur - 0.05 else f"no fim do trecho {sid}"
+                msg = f"{where}: encurte o end de {sid} para {new_end(i):.2f}s"
+            elif sil["start"] <= a + 0.1:
+                where = "no começo do vídeo" if sil["start"] <= 0.05 else f"no começo do trecho {sid}"
+                msg = f"{where}: mova o start de {sid} para {new_start(i):.2f}s"
+            else:
+                msg = (f"no meio do trecho {sid}: divida em dois, um terminando em {new_end(i):.2f}s e o outro "
+                       f"começando em {new_start(i):.2f}s")
+        flag("DEAD-AIR", sil["start"], f"silêncio de {sil['duration']:.2f}s {msg}", rid, sil["end"])
+
+    # ---- black frames
+    for b in blacks:
+        flag("BLACK", b["start"], f"tela preta por {b['duration']:.2f}s", end=b["end"])
+
+    # ---- range level balance against a reference level (speech-weighted median of the heard levels)
+    ranges_out = []
+    reference = None
+    if mono.size and segs and not silent:
+        win = int(0.05 * SR)
+        for i, s in enumerate(segs):
+            a, b = float(s["out_start"]), own_span(i)[1]
+            x = mono[int(a * SR):int(b * SR)]
+            vals = np.array([db(v) for v in rms_frames(x, 0.05)]) if x.size >= win else np.zeros(0)
+            gate = max(float(np.percentile(vals, 90)) - 20.0, floor_db + 6.0) if vals.size else 0.0
+            active = vals[vals > gate]
+            level = power_mean_db(active) if active.size >= 4 else None
+            src_level = source_levels.get(s["id"])
+            ranges_out.append({"id": s["id"], "level_db": None if level is None else round(level, 1),
+                               "source_level_db": None if src_level is None else round(src_level, 1),
+                               "speech_seconds": round(active.size * 0.05, 2),
+                               "gain_db": gains.get(str(s["id"]), 0.0)})
+        measured = [r for r in ranges_out if r["level_db"] is not None]
+        if len(measured) >= 2:
+            reference = weighted_median([r["level_db"] for r in measured], [r["speech_seconds"] for r in measured])
+            ref_range = next(r for r in measured if r["level_db"] == reference)
+            for r in measured:
+                r["delta_db"] = round(r["level_db"] - reference, 1)
+            # A jump between neighbours is heard even when both sit near the reference, and so is a
+            # drift from the first ranges to the last in small steps: fix the one farther from the reference.
+            jump_fix: dict[str, str] = {}
+            farther = lambda a, b: (a, b) if abs(a["level_db"] - reference) >= abs(b["level_db"] - reference) else (b, a)  # noqa: E731
+            for a, b in zip(measured, measured[1:]):
+                if abs(a["level_db"] - b["level_db"]) > ADJACENT_JUMP_DB:
+                    fix, other = farther(a, b)
+                    jump_fix.setdefault(fix["id"], other["id"])
+            lo, hi = min(measured, key=lambda r: r["level_db"]), max(measured, key=lambda r: r["level_db"])
+            if hi["level_db"] - lo["level_db"] > ADJACENT_JUMP_DB:
+                fix, other = farther(lo, hi)
+                jump_fix.setdefault(fix["id"], other["id"])
+            src_ref = ref_range.get("source_level_db")
+            for r, s in zip(ranges_out, segs):
+                if r["level_db"] is None:
+                    continue
+                delta = r["level_db"] - reference
+                if abs(delta) <= LEVEL_DELTA_DB and r["id"] not in jump_fix:
+                    continue
+                # gain_db acts before loudnorm, which in its dynamic mode squeezes the gap heard in the cut.
+                # The gap between the sources (gain included) is the one gain_db closes; it is used when it
+                # points the same way and is not smaller than the heard one.
+                change = delta
+                src_gap = None if src_ref is None or r.get("source_level_db") is None else r["source_level_db"] - src_ref
+                if src_gap is not None and src_gap * delta > 0 and abs(src_gap) >= abs(delta):
+                    change = src_gap
+                final = round(min(GAIN_CAP_DB, max(-GAIN_CAP_DB, r["gain_db"] - change)), 1)
+                r["suggested_gain_db"] = final
+                code, how = ("LOW-LEVEL", "abaixo") if delta < 0 else ("HIGH-LEVEL", "acima")
+                why = (f"{abs(delta):.1f} dB {how} do nível de referência ({reference:.1f} dB)"
+                       if abs(delta) > LEVEL_DELTA_DB else
+                       f"mais de {ADJACENT_JUMP_DB:.0f} dB diferente do trecho {jump_fix[r['id']]} "
+                       f"({abs(delta):.1f} dB {how} da referência)")
+                flag(code, float(s["out_start"]), f"{r['id']} está {why}: use gain_db {final:+.1f} nele no EDL "
+                     f"(hoje {r['gain_db']:+.1f})", r["id"], float(s["out_end"]))
+
+    flags.sort(key=lambda f: (f["time"] is None, f["time"] or 0.0))
+    report = {
+        "video": str(video), "edl": str(edl_path), "timeline": str(tl_path) if tl_path else None,
+        "created_at": now_iso(), "min_silence": min_silence,
+        "duration": dur_info, "loudness": loud,
+        "speech_ref_db": round(speech_ref, 1), "silence_noise_db": round(noise_db, 1),
+        "junctions": junctions, "edges": edges, "dead_air": silences, "black": blacks,
+        "reference_level_db": None if reference is None else round(reference, 1),
+        "ranges": ranges_out, "warnings": warnings, "flags": flags, "ok": not flags,
+    }
+
+    # ---- PT-BR summary
+    lines = [f"Verificação do corte · {video.name}"]
+    tl_txt = f" · timeline {float(timeline['duration']):.2f}s" if timeline else " · sem timeline"
+    a_txt = f" · áudio {a_dur:.2f}s" if a_dur is not None else " · sem áudio"
+    lines.append(f"Duração: {v_dur:.2f}s ({v_frames} quadros){a_txt}{tl_txt}")
+    if silent:
+        lines.append("Loudness: sem som")
+    elif loud.get("integrated") is not None:
+        tp_ln = loud.get("true_peak_loudnorm")
+        tp_txt = f"{tp_ln:.2f}" if tp_ln is not None else fmt_db(loud.get("true_peak"))
+        lines.append(f"Loudness: {loud['integrated']:.1f} LUFS · pico real {tp_txt} dBTP"
+                     f" · LRA {fmt_db(loud.get('lra'))} · amostras estouradas {clipped}")
+    n_click = sum(1 for j in junctions if j["click"])
+    lines.append(f"Junções: {len(junctions)} · estalos {n_click}"
+                 + (f" · pior {max(j['ratio'] for j in junctions):.1f}x" if junctions else ""))
+    n_edge = sum(1 for e in edges if e["in_speech"])
+    n_word = sum(1 for e in edges if e["in_word"] and not e["in_speech"])
+    lines.append(f"Bordas dos trechos: {len(edges)} · dentro da fala {n_edge} · no meio de palavra {n_word}")
+    if reference is not None:
+        spread = [r["delta_db"] for r in ranges_out if r.get("delta_db") is not None]
+        lines.append(f"Nível dos trechos: de {min(spread):+.1f} a {max(spread):+.1f} dB da referência ({reference:.1f} dB)")
+    lines.append(f"Silêncio >= {min_silence:g}s: {len(silences)} · tela preta: {len(blacks)}")
+    for w in warnings:
+        lines.append(f"aviso: {w}")
+    if flags:
+        lines.append("")
+        lines.append(f"FLAGS ({len(flags)}):")
+        for f in flags:
+            t = fmt_time(f["time"]) if f["time"] is not None else "  --  "
+            lines.append(f"  {t}  {f['code']:15s} {f['message']}")
+    else:
+        lines.append("")
+        lines.append("Nenhum problema encontrado.")
+    return report, lines
+
+
+def main() -> int:
+    ap = argparse.ArgumentParser(description="Confere o corte renderizado e lista problemas com o tempo de cada um.")
+    ap.add_argument("edl", type=Path, help="edl.json usado no render")
+    ap.add_argument("video", type=Path, help="cut.mp4")
+    ap.add_argument("--min-silence", type=float, default=0.7, help="silêncio mínimo para marcar DEAD-AIR (padrão 0.7s)")
+    ap.add_argument("--ask-approval", action="store_true",
+                    help="pede a aprovação no preview mesmo com avisos (use depois de explicar à pessoa os que ficam)")
+    ap.add_argument("-o", "--output", type=Path, help="JSON do relatório (padrão: edit/verify/cut_report.json)")
+    ap.add_argument("--sem-aprovacao", action="store_true",
+                    help="só confere, não mexe no preview (o conferir_corte.py roda assim, junto da fala)")
+    ap.add_argument("--aprovar", action="store_true",
+                    help="não confere de novo: pede a aprovação a partir do relatório já feito deste cut.mp4")
+    args = ap.parse_args()
+
+    edl_path, video = abspath(args.edl), abspath(args.video)
+    if args.aprovar:
+        out = abspath(args.output) if args.output else edl_path.parent / "verify" / "cut_report.json"
+        report = load_json(out)
+        if (not isinstance(report, dict) or not video.exists() or report.get("video") != str(video)
+                or video.stat().st_mtime > out.stat().st_mtime):
+            print(f"erro: {out.name} não é deste {video.name} (ou o corte mudou depois). Rode o verify sem --aprovar.",
+                  file=sys.stderr)
+            return 2
+        state_line, report["approval_requested"] = update_state(edl_path.parent, video, report["flags"],
+                                                                args.ask_approval)
+        save_json(out, report)
+        print(state_line or "Esse vídeo não é o corte da pasta: nada a aprovar.")
+        return 0
+    if not edl_path.exists():
+        print(f"erro: EDL não encontrado: {edl_path}", file=sys.stderr)
+        return 2
+    if not video.exists():
+        print(f"erro: vídeo não encontrado: {video}", file=sys.stderr)
+        return 2
+    try:
+        edl = json.loads(edl_path.read_text(encoding="utf-8"))
+    except (json.JSONDecodeError, UnicodeDecodeError) as exc:
+        print(f"erro: o EDL não é um JSON válido: {exc}", file=sys.stderr)
+        return 2
+    if not isinstance(edl, dict) or not isinstance(edl.get("ranges"), list):
+        print("erro: o EDL não tem trechos em \"ranges\"", file=sys.stderr)
+        return 2
+    try:
+        report, lines = verify(edl_path, video, args.min_silence)
+    except (ValueError, RuntimeError, json.JSONDecodeError) as exc:
+        print(f"erro: não consegui ler {video.name}: {exc}", file=sys.stderr)
+        return 2
+    except (TypeError, KeyError) as exc:
+        print(f"erro: o EDL ou o timeline tem um campo faltando ou inválido ({exc.__class__.__name__}: {exc})",
+              file=sys.stderr)
+        return 2
+    out = abspath(args.output) if args.output else edl_path.parent / "verify" / "cut_report.json"
+    state_line, report["approval_requested"] = (None, None) if args.sem_aprovacao else \
+        update_state(edl_path.parent, video, report["flags"], args.ask_approval)
+    save_json(out, report)
+    print("\n".join(lines))
+    if state_line:
+        print(state_line)
+    print(f"\nRelatório: {out}")
+    return 0
+
+
+if __name__ == "__main__":
+    sys.exit(main())