planscript 0.1.0 → 1.2.0

package/LANGUAGE_REFERENCE.md

@@ -0,0 +1,722 @@
+# PlanScript Language Reference
+
+This document provides a complete specification of the PlanScript language for defining floor plans. It is intended as both a reference for developers and as context for LLMs (ChatGPT, Claude, etc.) to generate valid PlanScript code.
+
+> **For LLM users:** Provide this document as context when asking an LLM to generate PlanScript floor plans.
+
+## Table of Contents
+
+- [File Structure](#file-structure)
+- [Units](#units)
+- [Origin](#origin)
+- [Defaults](#defaults)
+- [Plan Block](#plan-block)
+- [Footprint](#footprint)
+- [Rooms](#rooms)
+  - [Rectangle with Two Corners](#rectangle-with-two-corners)
+  - [Rectangle with Position and Size](#rectangle-with-position-and-size)
+  - [Rectangle with Size and Attachment](#rectangle-with-size-and-attachment)
+  - [Rectangle with Span](#rectangle-with-span)
+  - [Polygon Rooms](#polygon-rooms)
+  - [Room Labels](#room-labels)
+- [Room References](#room-references)
+- [Openings](#openings)
+  - [Doors](#doors)
+  - [Windows](#windows)
+  - [Position Syntax](#position-syntax)
+- [Assertions](#assertions)
+- [Comments](#comments)
+- [Complete Examples](#complete-examples)
+
+---
+
+## File Structure
+
+A PlanScript file (`.psc`) has the following structure. All top-level declarations are optional except for `plan`.
+
+```planscript
+units <unit>              # Optional: set measurement units
+origin (<x>, <y>)         # Optional: set coordinate origin
+defaults { ... }          # Optional: default values for openings
+
+plan "<name>" {           # Required: the floor plan definition
+  footprint ...           # Required: building boundary
+  room ... { ... }        # One or more rooms
+  opening ... { ... }     # Zero or more openings (doors/windows)
+  assert ...              # Zero or more validation assertions
+}
+```
+
+---
+
+## Units
+
+Sets the measurement unit for all coordinates and dimensions.
+
+```planscript
+units <unit>
+```
+
+**Valid units:**
+| Unit | Description |
+|------|-------------|
+| `m` | Meters (default) |
+| `cm` | Centimeters |
+| `mm` | Millimeters |
+| `ft` | Feet |
+| `in` | Inches |
+
+**Example:**
+```planscript
+units m
+```
+
+---
+
+## Origin
+
+Sets the coordinate origin point. Default is `(0, 0)`.
+
+```planscript
+origin (<x>, <y>)
+```
+
+**Example:**
+```planscript
+origin (0, 0)
+```
+
+---
+
+## Defaults
+
+Sets default values for door and window widths. When set, the `width` property becomes optional in opening definitions.
+
+```planscript
+defaults {
+  door_width <value>
+  window_width <value>
+}
+```
+
+**Example:**
+```planscript
+defaults {
+  door_width 0.9
+  window_width 1.2
+}
+```
+
+---
+
+## Plan Block
+
+The main container for the floor plan. A file must have exactly one plan block.
+
+```planscript
+plan "<name>" {
+  # footprint, rooms, openings, assertions
+}
+```
+
+The name is optional:
+```planscript
+plan {
+  # ...
+}
+```
+
+---
+
+## Footprint
+
+Defines the building boundary. Required inside the plan block.
+
+### Rectangle Footprint
+
+```planscript
+footprint rect (<x1>, <y1>) (<x2>, <y2>)
+```
+
+**Example:**
+```planscript
+footprint rect (0, 0) (20, 15)
+```
+
+### Polygon Footprint
+
+For non-rectangular buildings (L-shaped, etc.):
+
+```planscript
+footprint polygon [
+  (<x1>, <y1>),
+  (<x2>, <y2>),
+  (<x3>, <y3>),
+  ...
+]
+```
+
+**Example (L-shaped building):**
+```planscript
+footprint polygon [
+  (0, 0),
+  (20, 0),
+  (20, 10),
+  (12, 10),
+  (12, 15),
+  (0, 15)
+]
+```
+
+---
+
+## Rooms
+
+Rooms define the interior spaces. Each room has a unique identifier and a shape.
+
+### Rectangle with Two Corners
+
+```planscript
+room <id> {
+  rect (<x1>, <y1>) (<x2>, <y2>)
+}
+```
+
+**Example:**
+```planscript
+room living {
+  rect (1, 1) (9, 7)
+}
+```
+
+### Rectangle with Position and Size
+
+```planscript
+room <id> {
+  rect at (<x>, <y>) size (<width>, <height>)
+}
+```
+
+**Example:**
+```planscript
+room bedroom {
+  rect at (1, 9) size (4, 5)
+}
+```
+
+### Rectangle with Size and Attachment
+
+Positions a room relative to another room.
+
+```planscript
+room <id> {
+  rect size (<width>, <height>)
+  attach <direction> <room_ref>
+  align <alignment>
+  gap <distance>
+}
+```
+
+**Directions:**
+| Direction | Description |
+|-----------|-------------|
+| `north_of` | Above the reference room |
+| `south_of` | Below the reference room |
+| `east_of` | To the right of the reference room |
+| `west_of` | To the left of the reference room |
+
+**Alignments:**
+| Alignment | Description |
+|-----------|-------------|
+| `top` | Align top edges (for east_of/west_of) |
+| `bottom` | Align bottom edges (for east_of/west_of) |
+| `left` | Align left edges (for north_of/south_of) |
+| `right` | Align right edges (for north_of/south_of) |
+| `center` | Center alignment |
+
+**Example:**
+```planscript
+room kitchen {
+  rect size (4, 6)
+  attach east_of living
+  align top
+  gap 0
+}
+```
+
+### Rectangle with Span
+
+Creates a room that spans between reference points from other rooms.
+
+```planscript
+room <id> {
+  rect span x from <room>.<edge> to <room>.<edge> y (<y1>, <y2>)
+}
+```
+
+Or spanning on Y axis:
+```planscript
+room <id> {
+  rect span y from <room>.<edge> to <room>.<edge> x (<x1>, <x2>)
+}
+```
+
+**Example:**
+```planscript
+room hallway {
+  rect span x from living.left to kitchen.right y (7, 9)
+}
+```
+
+### Polygon Rooms
+
+For non-rectangular rooms:
+
+```planscript
+room <id> {
+  polygon [
+    (<x1>, <y1>),
+    (<x2>, <y2>),
+    (<x3>, <y3>),
+    ...
+  ]
+}
+```
+
+### Room Labels
+
+Optional display label for the room:
+
+```planscript
+room <id> {
+  rect (1, 1) (9, 7)
+  label "<display name>"
+}
+```
+
+**Example:**
+```planscript
+room living {
+  rect (1, 1) (9, 7)
+  label "Living Room"
+}
+```
+
+---
+
+## Room References
+
+Reference points and edges of rooms for positioning and spanning.
+
+### Edge References
+
+| Reference | Description |
+|-----------|-------------|
+| `<room>.left` | X coordinate of left edge |
+| `<room>.right` | X coordinate of right edge |
+| `<room>.top` | Y coordinate of top edge |
+| `<room>.bottom` | Y coordinate of bottom edge |
+
+**Example:**
+```planscript
+rect span x from living.left to kitchen.right y (7, 9)
+```
+
+### Edge Selectors
+
+For placing openings on specific walls:
+
+| Selector | Description |
+|----------|-------------|
+| `<room>.edge north` | Top wall |
+| `<room>.edge south` | Bottom wall |
+| `<room>.edge east` | Right wall |
+| `<room>.edge west` | Left wall |
+
+**Example:**
+```planscript
+opening window w1 {
+  on living.edge south
+  at 2.0
+}
+```
+
+---
+
+## Openings
+
+Openings define doors and windows in walls.
+
+### Doors
+
+Doors between two rooms:
+
+```planscript
+opening door <id> {
+  between <room1> and <room2>
+  on shared_edge
+  at <position>
+  width <value>           # Optional if defaults set
+}
+```
+
+**Example:**
+```planscript
+opening door d1 {
+  between living and kitchen
+  on shared_edge
+  at 50%
+  width 0.9
+}
+```
+
+Door on a specific room edge:
+
+```planscript
+opening door <id> {
+  on <room>.edge <direction>
+  at <position>
+  width <value>
+}
+```
+
+### Windows
+
+Windows are placed on exterior walls:
+
+```planscript
+opening window <id> {
+  on <room>.edge <direction>
+  at <position>
+  width <value>           # Optional if defaults set
+  sill <height>           # Optional: sill height from floor
+}
+```
+
+**Example:**
+```planscript
+opening window w1 {
+  on living.edge south
+  at 2.0
+  width 2.4
+  sill 0.9
+}
+```
+
+### Position Syntax
+
+Opening positions can be specified two ways:
+
+| Syntax | Description |
+|--------|-------------|
+| `at <number>%` | Percentage along the wall (0-100%) |
+| `at <number>` | Absolute distance from wall start (in current units) |
+
+**Examples:**
+```planscript
+at 50%      # Centered on the wall
+at 25%      # 25% from the start of the wall
+at 2.0      # 2 meters from the start of the wall
+at 0.5      # 0.5 meters from the start of the wall
+```
+
+---
+
+## Assertions
+
+Assertions validate the floor plan. They cause compilation errors if not satisfied.
+
+### No Overlap
+
+Ensures rooms don't overlap:
+
+```planscript
+assert no_overlap rooms
+```
+
+### Inside Footprint
+
+Ensures all rooms are within the building footprint:
+
+```planscript
+assert inside footprint all_rooms
+```
+
+Or for a specific room:
+
+```planscript
+assert inside footprint <room_id>
+```
+
+### Minimum Room Area
+
+Ensures a room meets minimum area requirements:
+
+```planscript
+assert min_room_area <room_id> >= <value>
+```
+
+**Example:**
+```planscript
+assert min_room_area bedroom >= 12.0
+```
+
+---
+
+## Comments
+
+Single-line comments start with `#`:
+
+```planscript
+# This is a comment
+room living {
+  rect (1, 1) (9, 7)  # Inline comment
+}
+```
+
+---
+
+## Complete Examples
+
+### Simple: Two Rooms with Door
+
+```planscript
+units m
+
+plan "Simple Apartment" {
+  footprint rect (0, 0) (10, 8)
+
+  room living {
+    rect (0, 0) (6, 8)
+    label "Living Room"
+  }
+
+  room bedroom {
+    rect (6, 0) (10, 8)
+    label "Bedroom"
+  }
+
+  opening door d1 {
+    between living and bedroom
+    on shared_edge
+    at 50%
+    width 0.9
+  }
+}
+```
+
+### Medium: House with Multiple Rooms
+
+```planscript
+units m
+
+defaults {
+  door_width 0.9
+  window_width 1.5
+}
+
+plan "Family House" {
+  footprint rect (0, 0) (15, 12)
+
+  # Main living area
+  room living {
+    rect (1, 1) (8, 7)
+    label "Living Room"
+  }
+
+  # Kitchen attached to living room
+  room kitchen {
+    rect size (5, 6)
+    attach east_of living
+    align top
+    gap 0
+    label "Kitchen"
+  }
+
+  # Hallway spanning across
+  room hall {
+    rect span x from living.left to kitchen.right y (7, 9)
+    label "Hallway"
+  }
+
+  # Bedrooms
+  room master {
+    rect at (1, 9) size (5, 3)
+    label "Master Bedroom"
+  }
+
+  room bedroom2 {
+    rect at (6, 9) size (4, 3)
+    label "Bedroom 2"
+  }
+
+  # Bathroom
+  room bath {
+    rect at (10, 9) size (3, 3)
+    label "Bathroom"
+  }
+
+  # Doors
+  opening door d1 { between living and hall on shared_edge at 50% }
+  opening door d2 { between kitchen and hall on shared_edge at 50% }
+  opening door d3 { between hall and master on shared_edge at 50% }
+  opening door d4 { between hall and bedroom2 on shared_edge at 50% }
+  opening door d5 { between hall and bath on shared_edge at 50% }
+
+  # Windows
+  opening window w1 { on living.edge south at 3.0 }
+  opening window w2 { on master.edge north at 2.0 }
+  opening window w3 { on bedroom2.edge north at 1.5 }
+
+  # Validation
+  assert no_overlap rooms
+  assert inside footprint all_rooms
+  assert min_room_area master >= 12.0
+}
+```
+
+### Complex: L-Shaped Building
+
+```planscript
+units m
+
+defaults {
+  door_width 0.9
+  window_width 1.2
+}
+
+plan "L-Shaped House" {
+  # L-shaped footprint
+  footprint polygon [
+    (0, 0),
+    (12, 0),
+    (12, 8),
+    (7, 8),
+    (7, 14),
+    (0, 14)
+  ]
+
+  # Ground floor rooms
+  room living {
+    rect (1, 1) (6, 7)
+    label "Living Room"
+  }
+
+  room kitchen {
+    rect (7, 1) (11, 7)
+    label "Kitchen"
+  }
+
+  room dining {
+    rect (1, 8) (6, 13)
+    label "Dining Room"
+  }
+
+  # Doors
+  opening door d1 {
+    between living and kitchen
+    on shared_edge
+    at 50%
+  }
+
+  opening door d2 {
+    between living and dining
+    on shared_edge
+    at 50%
+  }
+
+  # Windows on exterior walls
+  opening window w1 { on living.edge south at 2.0 }
+  opening window w2 { on living.edge west at 3.0 }
+  opening window w3 { on kitchen.edge south at 2.0 }
+  opening window w4 { on kitchen.edge east at 3.0 }
+  opening window w5 { on dining.edge west at 2.5 }
+  opening window w6 { on dining.edge north at 2.0 }
+
+  assert no_overlap rooms
+  assert inside footprint all_rooms
+}
+```
+
+### Studio Apartment with Bathroom
+
+```planscript
+units m
+
+defaults {
+  door_width 0.8
+  window_width 1.0
+}
+
+plan "Studio Apartment" {
+  footprint rect (0, 0) (8, 6)
+
+  room main {
+    rect (0, 0) (8, 4.5)
+    label "Living/Bedroom"
+  }
+
+  room bath {
+    rect (5, 4.5) (8, 6)
+    label "Bathroom"
+  }
+
+  room kitchen {
+    rect (0, 4.5) (5, 6)
+    label "Kitchenette"
+  }
+
+  opening door d1 { between main and bath on shared_edge at 50% }
+  opening door d2 { between main and kitchen on shared_edge at 60% }
+
+  opening window w1 { on main.edge south at 4.0 width 2.0 }
+
+  assert no_overlap rooms
+}
+```
+
+---
+
+## Syntax Summary
+
+### Keywords
+
+```
+units, origin, defaults, plan, footprint, room, opening, assert,
+rect, polygon, at, size, attach, align, gap, span, from, to, label,
+door, window, between, and, on, shared_edge, width, sill,
+north_of, south_of, east_of, west_of,
+north, south, east, west,
+top, bottom, left, right, center,
+no_overlap, inside, all_rooms, min_room_area,
+m, cm, mm, ft, in
+```
+
+### Coordinate Format
+
+```
+(<x>, <y>)           # Point
+(<x1>, <y1>) (<x2>, <y2>)   # Two corners
+```
+
+### Numeric Values
+
+```
+10        # Integer
+10.5      # Decimal
+50%       # Percentage (for positions)
+```
+
+### Identifiers
+
+Room and opening IDs must:
+- Start with a letter or underscore
+- Contain only letters, numbers, and underscores
+- Be unique within their category
+
+```
+room living { ... }      # Valid
+room my_room { ... }     # Valid
+room room1 { ... }       # Valid
+room 1room { ... }       # Invalid - starts with number
+```

package/README.md

@@ -1,8 +1,34 @@
-# PlanScript
+# 🏠 PlanScript
 
-A DSL for defining floor plans. Compile `.psc` files to SVG or JSON.
+A **deterministic, textual DSL** for defining 2D architectural floor plans. Write human-readable code, compile to precise geometry.
 
-## Example
+<p align="center">
+  <img src="examples/house.svg" alt="Floor plan" width="50%">
+</p>
+
+## ✨ Features
+
+- **📝 Human & LLM Friendly** — Simple, repetitive syntax that's easy to write and generate
+- **🎯 Deterministic** — Same input always produces the same output, no heuristics or AI magic
+- **🔧 Compiler-based** — Parse → Validate → Generate pipeline with clear error messages
+- **📐 Precise Geometry** — Exact coordinates, walls, and openings from high-level descriptions
+- **🖼️ Multiple Exports** — SVG (with optional dimensions), JSON geometry IR
+- **✅ Built-in Validation** — Assert constraints like no overlaps, minimum areas, containment
+
+## 🎯 Design Philosophy
+
+PlanScript is intentionally **limited in scope**:
+
+| ✅ What it does | ❌ What it doesn't do |
+|-----------------|----------------------|
+| Spatial layout (rooms, walls, doors, windows) | Plumbing, electrical, HVAC |
+| Deterministic compilation | Generative/AI design |
+| Precise geometry output | Aesthetic decisions |
+| Clear validation errors | "Best layout" optimization |
+
+> *It trades creativity for **precision, repeatability, and correctness**.*
+
+## 📖 Example
 
 ```planscript
 units m
@@ -48,6 +74,9 @@ plan "Example House" {
   opening door d2 { between living and kitchen on shared_edge at 50% }
   opening door d3 { between hall and bedroom on shared_edge at 50% }
   opening window w1 { on living.edge south at 2.0 }
+
+  assert no_overlap rooms
+  assert inside footprint all_rooms
 }
 ```
 
@@ -59,16 +88,16 @@ plan "Example House" {
 </p>
 
 <p align="center">
-  <em>Without dimensions</em> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <em>With <code>--dimensions</code> flag</em>
+  <em>Default output</em> ・ <em>With <code>--dimensions</code> flag</em>
 </p>
 
-## Installation
+## 📦 Installation
 
 ```bash
 npm install planscript
 ```
 
-## CLI Usage
+## 🖥️ CLI Usage
 
 ```bash
 # Compile to SVG
@@ -84,7 +113,7 @@ planscript house.psc --json house.json
 planscript house.psc --svg house.svg --json house.json
 ```
 
-## Library Usage
+## 📚 Library Usage
 
 ### Simple Compilation
 
@@ -92,28 +121,9 @@ planscript house.psc --svg house.svg --json house.json
 import { compile } from 'planscript';
 
 const source = `
-  units m
-  defaults {
-    door_width 0.9
-  }
   plan "My House" {
-    footprint rect (0,0) (15,12)
-    
-    room living {
-      rect (1,1) (8,6)
-      label "Living Room"
-    }
-    
-    room kitchen {
-      rect (8,1) (14,6)
-      label "Kitchen"
-    }
-    
-    opening door d1 {
-      between living and kitchen
-      on shared_edge
-      at 50%
-    }
+    footprint rect (0,0) (10,8)
+    room living { rect (0,0) (10,8) label "Living Room" }
   }
 `;
 
@@ -130,13 +140,13 @@ if (result.success) {
 ### Step-by-Step Pipeline
 
 ```typescript
-import { 
-  parse, 
-  lower, 
-  generateGeometry, 
-  validate, 
-  exportSVG, 
-  exportJSON 
+import {
+  parse,
+  lower,
+  generateGeometry,
+  validate,
+  exportSVG,
+  exportJSON
 } from 'planscript';
 
 // 1. Parse source to AST
@@ -155,14 +165,13 @@ if (errors.length > 0) {
 }
 
 // 5. Export
-const svg = exportSVG(geometry, { width: 800, height: 600 });
-const json = exportJSON(geometry, { pretty: true }, ast);
+const svg = exportSVG(geometry, { showDimensions: true });
+const json = exportJSON(geometry, { pretty: true });
 ```
 
 ### Export Options
 
 ```typescript
-// SVG options
 const svg = exportSVG(geometry, {
   width: 1000,           // Canvas width (default: 1000)
   height: 800,           // Canvas height (default: 800)
@@ -174,20 +183,17 @@ const svg = exportSVG(geometry, {
   doorColor: '#e74c3c',
   windowColor: '#3498db',
 });
-
-// JSON options
-const json = exportJSON(geometry, { 
-  pretty: true  // Pretty-print JSON (default: false)
-}, ast);
 ```
 
-## Language Syntax
+## 📐 Language Syntax
+
+For the complete language specification, see the **[Language Reference](LANGUAGE_REFERENCE.md)**.
 
-### Basic Structure
+### Quick Overview
 
 ```planscript
 units m                    # meters, cm, mm, ft, in
-origin (0,0)               # optional origin point
+
 defaults {
   door_width 0.9           # default door width
   window_width 1.2         # default window width
@@ -195,83 +201,68 @@ defaults {
 
 plan "House Name" {
   footprint rect (0,0) (20,15)
-  
-  # rooms...
-  # openings...
-  # assertions...
-}
-```
 
-### Room Definitions
+  # Rooms - multiple ways to define
+  room living { rect (0,0) (8,6) }                           # two corners
+  room bed { rect at (0,6) size (4,4) }                      # position + size
+  room kitchen { rect size (4,6) attach east_of living }     # relative placement
+  room hall { rect span x from living.left to bed.right y (6,8) }  # span
 
-```planscript
-# Rectangle with two corners
-room living {
-  rect (0,0) (8,6)
-  label "Living Room"
-}
+  # Openings
+  opening door d1 { between living and hall on shared_edge at 50% }
+  opening window w1 { on living.edge south at 2.0 width 1.5 }
 
-# Rectangle with position and size
-room bedroom {
-  rect at (0,6) size (4,4)
+  # Validation
+  assert no_overlap rooms
+  assert inside footprint all_rooms
+  assert min_room_area bed >= 12
 }
+```
 
-# Relative placement
-room kitchen {
-  rect size (4,6)
-  attach east_of living
-  align top
-  gap 0
-}
+## 🤖 Using with LLMs
 
-# Span syntax (reference other rooms)
-room hallway {
-  rect span x from living.left to kitchen.right y (6, 8)
-}
-```
+PlanScript is designed to be **LLM-friendly**. When asking ChatGPT, Claude, or other LLMs to generate floor plans:
 
-### Openings
+1. **Provide the [LANGUAGE_REFERENCE.md](LANGUAGE_REFERENCE.md)** as context
+2. Describe your floor plan requirements
+3. The LLM can generate valid PlanScript code
+4. Compile and iterate on errors if needed
 
-```planscript
-# Door between rooms
-opening door d1 {
-  between living and kitchen
-  on shared_edge
-  at 50%              # 50% along wall (centered)
-  width 0.9           # optional if defaults set
-}
+The deterministic nature means: **LLM generates → Compiler validates → LLM fixes → Repeat until valid**
 
-# Window on room edge
-opening window w1 {
-  on living.edge south
-  at 2.0              # 2 meters from wall start
-  width 1.5
-  sill 0.9            # sill height
-}
-```
+## 🔌 VS Code Extension
 
-### Position Syntax
+The PlanScript VS Code extension provides:
+- 🎨 Syntax highlighting
+- 🔗 Go to Definition (Ctrl+Click on room names)
+- 💬 Hover information
+- 📋 Document outline
+- ⌨️ Autocomplete
 
-- `at 50%` - percentage along wall (0-100)
-- `at 2.0` - absolute distance in meters from wall start
+### Installation
 
-### Assertions
+**From VS Code Marketplace:**
+1. Open VS Code
+2. Go to Extensions (Ctrl+Shift+X)
+3. Search for "PlanScript"
+4. Click Install
 
-```planscript
-assert no_overlap rooms              # rooms don't overlap
-assert inside footprint all_rooms    # rooms within footprint
-assert min_room_area bedroom >= 12   # minimum area check
+**From GitHub:**
+```bash
+git clone https://github.com/jfromaniello/vscode-planscript
+cd vscode-planscript
+npm install && npm run compile
+code --install-extension .
 ```
 
-## VS Code Extension
+## 🗺️ Roadmap
 
-Install the PlanScript VS Code extension for:
-- Syntax highlighting
-- Go to Definition (Ctrl+Click)
-- Hover information
-- Document outline
-- Autocomplete
+Future extensions (not in v1):
+- 🔄 Curved walls (`arc`)
+- 🏢 Multi-level plans
+- 🪑 Furniture placement
+- 📏 More export formats (DXF, PDF)
 
-## License
+## 📄 License
 
 MIT

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "planscript",
-  "version": "0.1.0",
+  "version": "1.2.0",
   "description": "PlanScript - A DSL for defining floor plans",
   "type": "module",
   "main": "dist/index.js",
@@ -18,6 +18,7 @@
     "dist",
     "examples",
     "README.md",
+    "LANGUAGE_REFERENCE.md",
     "LICENSE"
   ],
   "scripts": {