penguins-eggs 9.0.2 → 9.0.9

package/addons/openos/theme/calamares/modules/partition.yml

@@ -1,233 +0,0 @@
-# SPDX-FileCopyrightText: no
-# SPDX-License-Identifier: CC0-1.0
-#
-# This setting specifies the mount point of the EFI system partition. Some
-# distributions (Fedora, Debian, Manjaro, etc.) use /boot/efi, others (KaOS,
-# etc.) use just /boot.
-#
-# Defaults to "/boot/efi", may be empty (but weird effects ensue)
-efiSystemPartition:     "/boot/efi"
-
-# This optional setting specifies the size of the EFI system partition.
-# If nothing is specified, the default size of 300MiB will be used.
-# efiSystemPartitionSize:     300M
-
-# This optional setting specifies the name of the EFI system partition (see
-# PARTLABEL; gpt only; requires KPMCore >= 4.2.0).
-# If nothing is specified, the partition name is left unset.
-# efiSystemPartitionName:     EFI
-
-# In autogenerated partitioning, allow the user to select a swap size?
-# If there is exactly one choice, no UI is presented, and the user
-# cannot make a choice -- this setting is used. If there is more than
-# one choice, a UI is presented.
-#
-# Legacy settings *neverCreateSwap* and *ensureSuspendToDisk* correspond
-# to values of *userSwapChoices* as follows:
-#    - *neverCreateSwap* is true, means [none]
-#    - *neverCreateSwap* is false, *ensureSuspendToDisk* is false, [small]
-#    - *neverCreateSwap* is false, *ensureSuspendToDisk* is true, [suspend]
-#
-# Autogenerated swap sizes are as follows:
-#    - *suspend*: Swap is always at least total memory size,
-#      and up to 4GiB RAM follows the rule-of-thumb 2 * memory;
-#      from 4GiB to 8 GiB it stays steady at 8GiB, and over 8 GiB memory
-#      swap is the size of main memory.
-#    - *small*: Follows the rules above, but Swap is at
-#      most 8GiB, and no more than 10% of available disk.
-# In both cases, a fudge factor (usually 10% extra) is applied so that there
-# is some space for administrative overhead (e.g. 8 GiB swap will allocate
-# 8.8GiB on disk in the end).
-#
-# If *file* is enabled here, make sure to have the *fstab* module
-# as well (later in the exec phase) so that the swap file is
-# actually created.
-userSwapChoices:
-    - none      # Create no swap, use no swap
-    - small     # Up to 4GB
-    - suspend   # At least main memory size
-    # - reuse     # Re-use existing swap, but don't create any (unsupported right now)
-    - file      # To swap file instead of partition
-
-# This optional setting specifies the name of the swap partition (see
-# PARTLABEL; gpt only; requires KPMCore >= 4.2.0).
-# If nothing is specified, the partition name is left unset.
-# swapPartitionName:      swap
-
-# LEGACY SETTINGS (these will generate a warning)
-# ensureSuspendToDisk:    true
-# neverCreateSwap:        false
-
-# Correctly draw nested (e.g. logical) partitions as such.
-drawNestedPartitions:   false
-
-# Show/hide partition labels on manual partitioning page.
-alwaysShowPartitionLabels: true
-
-# Allow manual partitioning.
-#
-# When set to false, this option hides the "Manual partitioning" button,
-# limiting the user's choice to "Erase", "Replace" or "Alongside".
-# This can be useful when using a custom partition layout we don't want
-# the user to modify.
-#
-# If nothing is specified, manual partitioning is enabled.
-#allowManualPartitioning:   true
-
-# Initial selection on the Choice page
-#
-# There are four radio buttons (in principle: erase, replace, alongside, manual),
-# and you can pick which of them, if any, is initially selected. For most
-# installers, "none" is the right choice: it makes the user pick something specific,
-# rather than accidentally being able to click past an important choice (in particular,
-# "erase" is a dangerous choice).
-#
-# The default is "none"
-#
-initialPartitioningChoice: none
-#
-# Similarly, some of the installation choices may offer a choice of swap;
-# the available choices depend on *userSwapChoices*, above, and this
-# setting can be used to pick a specific one.
-#
-# The default is "none" (no swap) if that is one of the enabled options, otherwise
-# one of the items from the options.
-initialSwapChoice: suspend
-
-# Default partition table type, used when a "erase" disk is made.
-#
-# When erasing a disk, a new partition table is created on disk.
-# In other cases, e.g. Replace and Alongside, as well as when using
-# manual partitioning, this partition table exists already on disk
-# and it is left unmodified.
-#
-# Suggested values: gpt, msdos
-# If nothing is specified, Calamares defaults to "gpt" if system is
-# efi or "msdos".
-#
-# Names are case-sensitive and defined by KPMCore.
-# defaultPartitionTableType: msdos
-
-# Requirement for partition table type
-#
-# Restrict the installation on disks that match the type of partition
-# tables that are specified.
-#
-# Suggested values: msdos, gpt
-# If nothing is specified, Calamares defaults to both "msdos" and "mbr".
-#
-# Names are case-sensitive and defined by KPMCore.
-# requiredPartitionTableType: gpt
-# or,
-# requiredPartitionTableType:
-#     - msdos
-#     - gpt
-
-# Default filesystem type, used when a "new" partition is made.
-#
-# When replacing a partition, the existing filesystem inside the
-# partition is retained. In other cases, e.g. Erase and Alongside,
-# as well as when using manual partitioning and creating a new
-# partition, this filesystem type is pre-selected. Note that
-# editing a partition in manual-creation mode will not automatically
-# change the filesystem type to this default value -- it is not
-# creating a new partition.
-#
-# Suggested values: ext2, ext3, ext4, reiser, xfs, jfs, btrfs
-# If nothing is specified, Calamares defaults to "ext4".
-#
-# Names are case-sensitive and defined by KPMCore.
-defaultFileSystemType:  "btrfs"
-
-# Show/hide LUKS related functionality in automated partitioning modes.
-# Disable this if you choose not to deploy early unlocking support in GRUB2
-# and/or your distribution's initramfs solution.
-#
-# BIG FAT WARNING:
-#
-# This option is unsupported, as it cuts out a crucial security feature.
-# Disabling LUKS and shipping Calamares without a correctly configured GRUB2
-# and initramfs is considered suboptimal use of the Calamares software. The
-# Calamares team will not provide user support for any potential issue that
-# may arise as a consequence of setting this option to false.
-# It is strongly recommended that system integrators put in the work to support
-# LUKS unlocking support in GRUB2 and initramfs/dracut/mkinitcpio/etc.
-# Support is offered to system integrators that wish to do so, through the
-# Calamares bug tracker, as well as in #calamares on Freenode.
-# For more information on setting up GRUB2 for Calamares with LUKS, see
-# https://github.com/calamares/calamares/wiki/Deploy-LUKS
-#
-# If nothing is specified, LUKS is enabled in automated modes.
-#enableLuksAutomatedPartitioning:    true
-
-# Partition layout.
-#
-# This optional setting specifies a custom partition layout.
-#
-# If nothing is specified, the default partition layout is a single partition
-# for root that uses 100% of the space and uses the filesystem defined by
-# defaultFileSystemType.
-#
-# Note: the EFI system partition is prepend automatically to the layout if
-# needed; the swap partition is appended to the layout if enabled (small of
-# suspend).
-#
-# Otherwise, the partition layout is defined as follow:
-#
-# partitionLayout:
-#     - name: "rootfs"
-#       type: "4f68bce3-e8cd-4db1-96e7-fbcaf984b709"
-#       filesystem: "ext4"
-#       mountPoint: "/"
-#       size: 20%
-#       minSize: 500M
-#       maxSize: 10G
-#       attributes: 0xffff000000000003
-#     - name: "home"
-#       type = "933ac7e1-2eb4-4f13-b844-0e14e2aef915"
-#       filesystem: "ext4"
-#       mountPoint: "/home"
-#       size: 3G
-#       minSize: 1.5G
-#       features:
-#         64bit: false
-#         casefold: true
-#     - name: "data"
-#       filesystem: "fat32"
-#       mountPoint: "/data"
-#       features:
-#         sector-size: 4096
-#         sectors-per-cluster: 128
-#       size: 100%
-#
-# There can be any number of partitions, each entry having the following attributes:
-#   - name: filesystem label
-#           and
-#           partition name (gpt only; since KPMCore 4.2.0)
-#   - uuid: partition uuid (optional parameter; gpt only; requires KPMCore >= 4.2.0)
-#   - type: partition type (optional parameter; gpt only; requires KPMCore >= 4.2.0)
-#   - attributes: partition attributes (optional parameter; gpt only; requires KPMCore >= 4.2.0)
-#   - filesystem: filesystem type (optional parameter; fs not created if "unformatted" or unset)
-#   - mountPoint: partition mount point (optional parameter; not mounted if unset)
-#   - size: partition size in bytes (append 'K', 'M' or 'G' for KiB, MiB or GiB)
-#           or
-#           % of the available drive space if a '%' is appended to the value
-#   - minSize: minimum partition size (optional parameter)
-#   - maxSize: maximum partition size (optional parameter)
-#   - features: filesystem features (optional parameter; requires KPMCore >= 4.2.0)
-#       name: boolean or integer or string
-
-# Checking for available storage
-#
-# This overlaps with the setting of the same name in the welcome module's
-# requirements section. If nothing is set by the welcome module, this
-# value is used instead. It is still a problem if there is no required
-# size set at all, and the replace and resize options will not be offered
-# if no required size is set.
-#
-# The value is in Gibibytes (GiB).
-#
-# BIG FAT WARNING: except for OEM-phase-0 use, you should be using
-#                  the welcome module, **and** configure this value in
-#                  `welcome.conf`, not here.
-# requiredStorage: 3.5

package/addons/openos/theme/livecd/README.md

@@ -1,23 +0,0 @@
-I'm trying to made a way to easy customize livecd boot.
-
-* grub.template.cfg
-* grub.theme.cfg
-* isolinux.template.cfg
-* isolinux.theme.cfg
-* splash.png
-
-# How it work
-eggs take cure to copy to fill the template with the necessary values and copy configurations on /boot/grub and /isolinux on the ISO image.
-
-# grub
-You can adapt the template and the grub theme file i accord to your needs. During the production of eggs file grub.template.cfg will be convertent in grub.cfg and copied under /boot/grub directory of the image.
-* __grub.template.cfg__ -> will became -> __/boot/grub/grub.cfg__ under the iso
-* __grub.theme.cfg__
-
-# isolinux
-You can adapt the template for isolinux and the isolinux theme. During the production of eggs file isolinux.template.cfg will be convertent in isolilinux.cfg and copied under /isolinux directory of the image.
-* __isolinux.template.cfg__ -> will became -> __/isolinux/isolinux.cfg__ under the iso
-* __isolinux.theme.cfg__
-
-# splash
-both the themes will use the same splash file, who will be copied under /isolinux directory of the image.

package/addons/openos/theme/livecd/grub.template.cfg

@@ -1,60 +0,0 @@
-# Preso da linux mint 20
-if loadfont $prefix/font.pf2 ; then
-  set gfxmode=800x600
-  set gfxpayload=keep
-  insmod efi_gop
-  insmod efi_uga
-  insmod video_bochs
-  insmod video_cirrus
-  insmod gfxterm
-  insmod png
-  terminal_output gfxterm
-fi
-
-set theme=/boot/grub/theme.cfg
-
-insmod play
-play 960 440 1 0 4 440 1
-if [ ${iso_path} ] ; then
-set loopback="findiso=${iso_path}"
-export loopback
-fi
-
-menuentry "{{{fullname}}} (kernel {{{kernel}}})" {
-    set gfxpayload=keep
-    linux {{{vmlinuz}}} boot=live components lang={{{lang}}} locales={{{locales}}} {{{netconfigOpt}}} {{{usernameOpt}}} timezone={{{timezoneOpt}}} quiet splash "${loopback}"
-    initrd  {{{initrdImg}}}
-}
-submenu "Languages" {
-    menuentry "English (en)" {
-    linux {{{vmlinuz}}} boot=live components lang=en_US.UTF-8 locales=en_US.UTF-8 {{{netconfigOpt}}} {{{usernameOpt}}} timezone={{{timezoneOpt}}} quiet splash "${loopback}"
-    initrd  {{{initrdImg}}}
-    }
-    menuentry "French (fr)" {
-    linux {{{vmlinuz}}} boot=live components lang=fr_FR.UTF-8 locales=fr_FR.UTF-8 {{{netconfigOpt}}} {{{usernameOpt}}} timezone={{{timezoneOpt}}} quiet splash "${loopback}"
-    initrd  {{{initrdImg}}}
-    }
-    menuentry "German (de)" {
-    linux {{{vmlinuz}}} boot=live components lang=de_DE.UTF-8 locales=de_DE.UTF-8 {{{netconfigOpt}}} {{{usernameOpt}}} timezone={{{timezoneOpt}}} quiet splash "${loopback}"
-    initrd  {{{initrdImg}}}
-    }
-    menuentry "Italiano (it)" {
-      linux {{{vmlinuz}}} boot=live components lang=it_IT.UTF-8 locales=it_IT.UTF-8 {{{netconfigOpt}}} {{{usernameOpt}}} timezone={{{timezoneOpt}}} quiet splash "${loopback}"
-      initrd  {{{initrdImg}}}
-    }
-    menuentry "Portuguese (Brazil) (pt_BR)" {
-    linux {{{vmlinuz}}} boot=live components lang=pt_BR.UTF-8 locales=pt_BR.UTF-8 {{{netconfigOpt}}} {{{usernameOpt}}} {{{timezoneOpt}}} quiet splash "${loopback}"
-    initrd  {{{initrdImg}}}
-    }
-        menuentry "Spanish (es)" {
-    linux {{{vmlinuz}}} boot=live components lang=es_PE.UTF-8 locales=es_PE.UTF-8 {{{netconfigOpt}}} {{{usernameOpt}}} timezone={{{timezoneOpt}}} quiet splash "${loopback}"
-    initrd  {{{initrdImg}}}
-    }
-}
-{
-  menuentry "English/safe" {
-  linux {{{vmlinuz}}} boot=live components locales=en_US.UTF-8 {{{netconfigOpt}}} {{{usernameOpt}}} timezone={{{timezoneOpt}}} nosplash vga=normal "${loopback}"
-  initrd  {{{initrdImg}}}
-}
-# Tutti questi restano da provare nella opzione safe
-# memtest noapic noapm nodma nomce nolapic nomodeset nosmp    

package/addons/openos/theme/livecd/grub.theme.cfg

@@ -1,42 +0,0 @@
-title-color: "cyan"
-title-text: "OpenOS-Neon_RLTS - Official version - OpenOS-Founder"
-# title-font: "Sans Regular 20"
-desktop-color: "grey"
-desktop-image: "/isolinux/splash.png"
-#message-color: "white"
-#message-bg-color: "cyan"
-#terminal-font: "Sans Regular 12"
-
-+ boot_menu {
-  top = 150
-  left = 15%
-  width = 75%
-  height = 130
-  #item_font = "Sans Regular 12"
-  item_color = "blue"
-  selected_item_color = "white"
-  item_height = 20
-  item_padding = 15
-  item_spacing = 5
-}
-
-+progress_bar {
-  id = "__timeout__"
-  left = 15%
-  top = 100%-18
-  width = 70%
-  height = 18
-  bg_color = "201, 0, 22"
-  fg_color = "255, 99,9"
-  border_color = "255, 181, 21"
-  show_text = true
-  font = "DejaVu Sans Regular 10"
-  text_color = "white"
-  text = "@TIMEOUT_NOTIFICATION_LONG@"
-}
-
-+ vbox {
-  top = 100%
-  left = 2%
-  + label {text = "Press 'E' key to edit" font = "Sans 10" color = "white" align = "left"}
-}

package/addons/openos/theme/livecd/isolinux.template.cfg

@@ -1,62 +0,0 @@
-#
-# eggs: isolinux.cfg
-#
-
-# search path for the c32 support libraries (libcom32, libutil etc.)
-path 
-include isolinux.theme.cfg
-default vesamenu.c32
-prompt 0
-timeout 200
-#
-#
-MENU TITLE OpenOS-Neon_RLTS - Official version OpenOS-Founder
-
-LABEL {{{fullame}}} (kernel {{{kernel}}})
-  SAY "Booting {{{customName}}} GNU/Linux Live (kernel {{{kernel}}})..."
-  linux {{{vmlinuz}}}
-  APPEND initrd={{{initrdImg}}} boot=live locales={{{locales}}} quiet splash
-
-MENU BEGIN languages 
-MENU TITLE languages 
-LABEL English (en)
-  SAY "Booting English (en)..."
-  linux {{{vmlinuz}}}
-  APPEND initrd={{{initrdImg}}} boot=live lang=en_US.UTF-8 locales=en_US.UTF-8 quiet splash
-LABEL French (fr)
-  SAY "Booting French (fr)..."
-  linux {{{vmlinuz}}}
-  APPEND initrd={{{initrdImg}}} boot=live lang=fr_FR.UTF-8 locales=fr_FR.UTF-8 quiet splash
-LABEL German (de)
-  SAY "Booting German (de)..."
-  linux {{{vmlinuz}}}
-  APPEND initrd={{{initrdImg}}} boot=live lang=de_DE.UTF-8 locales=de_DE.UTF-8 quiet splash
-LABEL Italiano (it)
-  SAY "Booting OpenOS-Neon_RLTS GNU/Linux Live (kernel 5.4.0-66-generic)..."
-  linux {{{vmlinuz}}}
-  APPEND initrd={{{initrdImg}}} boot=live lang=it_IT.UTF-8 locales=it_IT.UTF-8 quiet splash
-LABEL Portuguese (Brazil) (pt_BR)
-  SAY "Booting Portuguese (Brazil) (pt_BR)..."
-  linux {{{vmlinuz}}}
-  APPEND initrd={{{initrdImg}}} boot=live lang=pt_BR.UTF-8 locales=pt_BR.UTF-8 quiet splash
-LABEL Spanish (es)
-  SAY "Booting Spanish (es)..."
-  linux {{{vmlinuz}}}
-  APPEND initrd={{{initrdImg}}} boot=live lang=es_ES.UTF-8 locales=es_ES.UTF-8 quiet splash
-LABEL mainmenu 
-  MENU label Back
-  MENU exit
-  MENU end
-
-MENU BEGIN safe
-MENU TITLE safe
-DEFAULT English/safe
-LABEL English/safe
-  SAY "Booting {{{fullname}}} GNU/Linux Live (kernel {{{kernel}}}) vga mode english..."
-  linux {{{vmlinuz}}}
-  APPEND initrd={{{vmlinuz}}} locales=en_US.UTF-8  quiet splash ramdisk_size=1048576 root=/dev/ram rw noapic noacpi nosplash irqpoll -- 
-
-LABEL mainmenu 
-  MENU label Back
-  MENU exit
-  MENU end

package/addons/openos/theme/livecd/isolinux.theme.cfg

@@ -1,45 +0,0 @@
-#
-# eggs: isolinux.theme
-#
-
-MENU BACKGROUND splash.png
-# MENU COLOR element backgound foreground shadow
-# background and foreground are hexadecimal digits for alpha (opacity), red, green and blue,
-# respectively. #00000000 represents fully transparent, and #ffffffff represents opaque white.
-# shadow none/std
-MENU COLOR screen	    37;40      #80ffffff #00000000 std
-MENU COLOR border	    30;44      #40000000 #00000000 std
-MENU COLOR title	    1;36;44    #c00090f0 #00000000 std
-MENU COLOR unsel	    37;44      #90ffffff #00000000 std
-MENU COLOR sel  	    7;37;40    #e0000000 #20ff8000 all
-MENU COLOR hotsel	    1;7;37;40  #e0400000 #20ff8000 all
-MENU COLOR disabled	    1;30;44    #60cccccc #00000000 std
-MENU COLOR scrollbar	30;44      #40000000 #00000000 std
-MENU COLOR tabmsg	    31;40      #90ffff00 #00000000 std
-MENU COLOR cmdmark	    1;36;40    #c000ffff #00000000 std
-MENU COLOR cmdline	    37;40      #c0ffffff #00000000 std
-MENU COLOR pwdborder	30;47      #80ffffff #20ffffff std
-MENU COLOR pwdheader	31;47      #80ff8080 #20ffffff std
-MENU COLOR pwdentry	    30;47      #80ffffff #20ffffff std
-MENU COLOR timeout_msg	37;40      #80ffffff #00000000 std
-MENU COLOR timeout	    1;37;40    #c0ffffff #00000000 std
-MENU COLOR help 	    37;40      #c0ffffff #00000000 std
-MENU COLOR msg07	    37;40      #90ffffff #00000000 std
-
-# POSIZIONE
-MENU WIDTH 80
-MENU MARGIN 10
-MENU PASSWORDMARGIN 3
-MENU ROWS 12
-MENU TABMSGROW 18
-MENU CMDLINEROW 18
-MENU ENDROW -1
-MENU PASSWORDROW 11
-MENU TIMEOUTROW 20
-MENU HELPMSGROW 22
-MENU HELPMSGENDROW -1
-MENU HIDDENROW -2
-MENU HSHIFT 0
-MENU VSHIFT 0
-
-MENU tabmsg Press ENTER to boot or TAB to edit a menu entry