penguins-eggs 25.10.3 → 25.10.6

package/conf/distros/archlinux/calamares/modules/bootloader.yml

@@ -0,0 +1,86 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Bootloader configuration. The bootloader is installed to allow
+# the system to start (and pick one of the installed operating
+# systems to run).
+#
+# Take note that Debian-derivatives that use unmodified GRUB EFI packages
+# should specifically set *efiBootloaderId* to "debian" because that is
+# hard-coded in `grubx64.efi`.
+---
+# A variable from global storage which overrides the value of efiBootLoader
+#efiBootLoaderVar: "packagechooser_bootloader"
+
+# Define which bootloader you want to use for EFI installations
+# Possible options are 'grub', 'sb-shim', 'refind` and 'systemd-boot'.
+efiBootLoader: "grub"
+
+# systemd-boot configuration files settings
+
+# kernelSearchPath is the path relative to the root of the install to search for kernels
+# A kernel is identified by finding files which match regular expression, kernelPattern
+kernelSearchPath: "/usr/lib/modules"
+kernelPattern: "^vmlinuz.*"
+
+# loaderEntries is an array of options to add to loader.conf for systemd-boot
+# please note that the "default" option is added programmatically
+loaderEntries:
+  - "timeout 5"
+  - "console-mode keep"
+
+# systemd-boot and refind support custom kernel params
+kernelParams: [ "quiet" ]
+
+# A list of kernel names that refind should accept as kernels
+#refindKernelList: [ "linux","linux-lts","linux-zen","linux-hardened" ]
+
+# GRUB 2 binary names and boot directory
+# Some distributions (e.g. Fedora) use grub2-* (resp. /boot/grub2/) names.
+# These names are also used when using sb-shim, since that needs some
+# GRUB functionality (notably grub-probe) to work. As needed, you may use
+# complete paths like `/usr/bin/efibootmgr` for the executables.
+#
+grubInstall: "grub-install"
+grubMkconfig: "grub-mkconfig"
+grubCfg: "/boot/grub/grub.cfg"
+grubProbe: "grub-probe"
+efiBootMgr: "efibootmgr"
+
+# Optionally set the bootloader ID to use for EFI. This is passed to
+# grub-install --bootloader-id.
+#
+# If not set here, the value from bootloaderEntryName from branding.desc
+# is used, with problematic characters (space and slash) replaced.
+#
+# The ID is also used as a directory name within the EFI environment,
+# and the bootloader is copied from /boot/efi/EFI/<dirname>/ . When
+# setting the option here, keep in mind that the name is sanitized
+# (problematic characters, see above, are replaced).
+#
+# There are some special words possible at the end of *efiBootloaderId*:
+#   ${SERIAL} can be used to obtain a uniquely-numbered suffix
+#       that is added to the Id (yielding, e.g., `dirname1` or `dirname72`)
+#   ${RANDOM} can be used to obtain a unique 4-digit hex suffix
+#   ${PHRASE} can be used to obtain a unique 1-to-3-word suffix
+#       from a dictionary of space-themed words
+# These words must be at the **end** of the *efiBootloaderId* value.
+# There must also be at most one of them. If there is none, no suffix-
+# processing is done and the *efiBootloaderId* is used unchanged.
+#
+# NOTE: Debian derivatives that use the unmodified Debian GRUB EFI
+#       packages may need to set this to "debian" because that is
+#       hard-coded in `grubx64.efi`.
+#
+# efiBootloaderId: "dirname"
+
+# Optionally install a copy of the GRUB EFI bootloader as the EFI
+# fallback loader (either bootia32.efi or bootx64.efi depending on
+# the system). This may be needed on certain systems (Intel DH87MC
+# seems to be the only one). If you set this to false, take care
+# to add another module to optionally install the fallback on those
+# boards that need it.
+installEFIFallback: true
+
+# Optionally install both BIOS and UEFI GRUB bootloaders.
+installHybridGRUB: false

package/conf/distros/archlinux/calamares/modules/partition.yml

@@ -1,393 +1,15 @@
-# calamares 3.4
-# SPDX-FileCopyrightText: no
-# SPDX-License-Identifier: CC0-1.0
-#
-
-# Options for EFI system partition.
-#
-# - *mountPoint*
-#   This setting specifies the mount point of the EFI system partition. Some
-#   distributions (Fedora, Debian, Manjaro, etc.) use /boot/efi, others (KaOS,
-#   etc.) use just /boot.
-#
-#   Defaults to "/boot/efi", may be empty (but weird effects ensue)
-# - *recommendedSize*
-#   This optional setting specifies the size of the EFI system partition.
-#   If nothing is specified, the default size of 300MiB will be used.
-#   When writing quantities here, M is treated as MiB, and if you really
-#   want one-million (10^6) bytes, use MB.
-# - *minimumSize*
-#   This optional setting specifies the absolute minimum size of the EFI
-#   system partition. If nothing is specified, the *recommendedSize*
-#   is used instead.
-# - *label*
-#   This optional setting specifies the name of the EFI system partition (see
-#   PARTLABEL; gpt only; requires KPMCore >= 4.2.0).
-#   If nothing is specified, the partition name is left unset.
-#
-# Going below the *recommended* size is allowed, but the user will
-# get a warning that it might not work. Going below the *minimum*
-# size is not allowed and the user will be told it will not work.
-#
-# Both quantities must be at least 32MiB, this is enforced by the EFI
-# spec. If minimum is not specified, it defaults to the recommended
-# size. Distros that allow more user latitude can set the minimum lower.
-efi:
-    mountPoint:         "/boot/efi"
-    recommendedSize:    300MiB
-    minimumSize:        32MiB
-    label:              "EFI"
-
-# Deprecated alias of efi.mountPoint
-# efiSystemPartition:     "/boot/efi"
-
-# Deprecated alias of efi.recommendedSize
-# efiSystemPartitionSize:          300MiB
-
-# Deprecated alias of efi.label
-# efiSystemPartitionName:     EFI
-
-# In autogenerated partitioning, allow the user to select a swap size?
-# If there is exactly one choice, no UI is presented, and the user
-# cannot make a choice -- this setting is used. If there is more than
-# one choice, a UI is presented.
-#
-# Legacy settings *neverCreateSwap* and *ensureSuspendToDisk* correspond
-# to values of *userSwapChoices* as follows:
-#    - *neverCreateSwap* is true, means [none]
-#    - *neverCreateSwap* is false, *ensureSuspendToDisk* is false, [small]
-#    - *neverCreateSwap* is false, *ensureSuspendToDisk* is true, [suspend]
-#
-# Autogenerated swap sizes are as follows:
-#    - *suspend*: Swap is always at least total memory size,
-#      and up to 4GiB RAM follows the rule-of-thumb 2 * memory;
-#      from 4GiB to 8 GiB it stays steady at 8GiB, and over 8 GiB memory
-#      swap is the size of main memory.
-#    - *small*: Follows the rules above, but Swap is at
-#      most 8GiB, and no more than 10% of available disk.
-# In both cases, a fudge factor (usually 10% extra) is applied so that there
-# is some space for administrative overhead (e.g. 8 GiB swap will allocate
-# 8.8GiB on disk in the end).
-#
-# If *file* is enabled here, make sure to have the *fstab* module
-# as well (later in the exec phase) so that the swap file is
-# actually created.
+# This come from manjaro
+---
+efiSystemPartition:     "/boot/efi"
 userSwapChoices:
     - none      # Create no swap, use no swap
     - small     # Up to 4GB
     - suspend   # At least main memory size
-    # - reuse     # Re-use existing swap, but don't create any (unsupported right now)
     - file      # To swap file instead of partition
-
-# This optional setting specifies the name of the swap partition (see
-# PARTLABEL; gpt only; requires KPMCore >= 4.2.0).
-# If nothing is specified, the partition name is left unset.
-# swapPartitionName:      swap
-
-# LEGACY SETTINGS (these will generate a warning)
-# ensureSuspendToDisk:    true
-# neverCreateSwap:        false
-
-# This setting specifies the LUKS generation (i.e LUKS1, LUKS2) used internally by
-# cryptsetup when creating an encrypted partition.
-#
-# This option is set to luks1 by default, as grub doesn't support LUKS2 + Argon2id
-# currently. On the other hand grub does support LUKS2 with PBKDF2 and could therefore be
-# also set to luks2. Also there are some patches for grub and Argon2.
-# See: https://aur.archlinux.org/packages/grub-improved-luks2-git
-#
-# Choices: luks1, luks2 (in addition, "luks" means "luks1")
-#
-# The default is luks1
-#
-luksGeneration: luks1
-
-# This setting determines if encryption should be allowed when using zfs.  This
-# setting has no effect unless zfs support is provided.
-#
-# This setting is to handle the fact that some bootloaders(such as grub) do not
-# support zfs encryption.
-#
-# The default is true
-#
-# allowZfsEncryption: true
-
-# Correctly draw nested (e.g. logical) partitions as such.
-drawNestedPartitions:   false
-
-# Show/hide partition labels on manual partitioning page.
 alwaysShowPartitionLabels: true
-
-# Allow manual partitioning.
-#
-# When set to false, this option hides the "Manual partitioning" button,
-# limiting the user's choice to "Erase", "Replace" or "Alongside".
-# This can be useful when using a custom partition layout we don't want
-# the user to modify.
-#
-# If nothing is specified, manual partitioning is enabled.
-#allowManualPartitioning:   true
-
-# Show not encrypted boot partition warning.
-#
-# When set to false, this option does not show the
-# "Boot partition not encrypted" warning when encrypting the
-# root partition but not /boot partition.
-#
-# If nothing is specified, the warning is shown.
-#showNotEncryptedBootMessage:   true
-
-# Initial selection on the Choice page
-#
-# There are four radio buttons (in principle: erase, replace, alongside, manual),
-# and you can pick which of them, if any, is initially selected. For most
-# installers, "none" is the right choice: it makes the user pick something specific,
-# rather than accidentally being able to click past an important choice (in particular,
-# "erase" is a dangerous choice).
-#
-# The default is "none"
-#
-initialPartitioningChoice: none
-#
-# Similarly, some of the installation choices may offer a choice of swap;
-# the available choices depend on *userSwapChoices*, above, and this
-# setting can be used to pick a specific one.
-#
-# The default is "none" (no swap) if that is one of the enabled options, otherwise
-# one of the items from the options.
+# There are four options: erase, replace, alongside, manual),
+# the default is "none".
+initialPartitioningChoice: erase
 initialSwapChoice: none
-
-# armInstall
-#
-# Leaves 16MB empty at the start of a drive when partitioning
-# where usually the u-boot loader goes
-#
-# armInstall: false
-
-# Default partition table type, used when a "erase" disk is made.
-#
-# When erasing a disk, a new partition table is created on disk.
-# In other cases, e.g. Replace and Alongside, as well as when using
-# manual partitioning, this partition table exists already on disk
-# and it is left unmodified.
-#
-# Possible values: gpt, msdos (or other names defined by KPMcore).
-# Names are case-sensitive.
-#
-# If nothing is specified, Calamares defaults to "gpt" if system is
-# efi or "msdos" otherwise.
-#
-# defaultPartitionTableType: msdos
-
-# Specify whether to create a partition table layout suitable for a hybrid
-# (BIOS + EFI) bootloader installation. This will prepend both bios-boot and
-# EFI system partitions to the partition layout, regardless of whether the
-# booted system uses BIOS or EFI firmware. Defaults to false.
-#
-# createHybridBootloaderLayout: false
-
-# Requirement for partition table type
-#
-# Restrict the installation on disks that match the type of partition
-# tables that are specified.
-#
-# Possible values: msdos, gpt (or other names defined by KPMcore).
-# Names are case-sensitive.
-#
-# If nothing is specified, Calamares defaults to both "msdos" and "gpt".
-#
-# requiredPartitionTableType: gpt
-# requiredPartitionTableType:
-#     - msdos
-#     - gpt
-
-# Default filesystem type, used when a "new" partition is made.
-#
-# When replacing a partition, the new filesystem type will be from the
-# defaultFileSystemType value. In other cases, e.g. Erase and Alongside,
-# as well as when using manual partitioning and creating a new
-# partition, this filesystem type is pre-selected. Note that
-# editing a partition in manual-creation mode will not automatically
-# change the filesystem type to this default value -- it is not
-# creating a new partition.
-#
-# Suggested values: ext2, ext3, ext4, reiser, xfs, jfs, btrfs
-# If nothing is specified, Calamares defaults to "ext4".
-#
-# Names are case-sensitive and defined by KPMCore.
-defaultFileSystemType:  "ext4"
-
-# Selectable filesystem type, used when "erase" is done.
-#
-# When erasing the disk, the *defaultFileSystemType* is used (see
-# above), but it is also possible to give users a choice:
-# list suitable filesystems here. A drop-down is provided
-# to pick which is the filesystems will be used.
-#
-# The value *defaultFileSystemType* is added to this list (with a warning)
-# if not present; the default pick is the *defaultFileSystemType*.
-#
-# If not specified at all, uses *defaultFileSystemType* without a
-# warning (this matches traditional no-choice-available behavior best).
-# availableFileSystemTypes:  ["ext4","f2fs"]
-
-# Per-directory filesystem restrictions.
-#
-# This optional setting specifies what filesystems the user can and cannot use
-# for various directories and mountpoints when using manual partitioning.
-#
-# If nothing is specified, the only restriction enforced by default is that
-# the EFI system partition must use the fat32 filesystem.
-#
-# Otherwise, the filesystem restrictions are defined as follow:
-#
-# directoryFilesystemRestrictions:
-#     - directory: "any"
-#       allowedFilesystemTypes: ["all"]
-#     - directory: "/"
-#       allowedFilesystemTypes: ["ext4","xfs","btrfs","jfs","f2fs"]
-#     - mountpoint: "efi"
-#       allowedFilesystemTypes: ["fat32"]
-#       onlyWhenMountpoint: true
-#
-# There can be any number of mountpoints listed, each entry having the
-# following attributes:
-#   - mountpoint: mountpoint's full path
-#                 or
-#                 "any" to specify a global whitelist that applies to all
-#                 mountpoints
-#                 or
-#                 "efi" to specify a whitelist specific to the EFI system
-#                 partition, wherever that partition is located
-#   - allowedFilesystemTypes: the list of all filesystems valid for this
-#                             mountpoint. If the list contains exactly one
-#                             element, and that element is the special value
-#                             "any", all filesystem types recognized by
-#                             Calamares will be allowed.
-#   - onlyWhenMountpoint: Whether the restriction should apply only when the
-#                         specified directory is a mountpoint. When set to
-#                         true, Calamares will only enforce the listed
-#                         restrictions when the user makes a separate partition
-#                         for this directory and assigns the mountpoint
-#                         accordingly. When set to false, Calamares will
-#                         ensure this directory uses the specified filesystem
-#                         even if the directory is part of a filesystem on a
-#                         different mountpoint. Defaults to false.
-
-# The ClearMounts job unmounts / unmaps things before partitioning.
-# Some special entries under /dev/mapper are excepted from this process.
-# The example lists the three hard-coded exceptions which always apply
-# (they don't need to be listed here). Add other names or wildcards (with
-# a trailing '*') to this list if the live-ISO has additional mounts.
-essentialMounts: [ "live-*", "control", "ventoy" ]
-
-# Show/hide LUKS related functionality in automated partitioning modes.
-# Disable this if you choose not to deploy early unlocking support in GRUB2
-# and/or your distribution's initramfs solution.
-#
-# BIG FAT WARNING:
-#
-# This option is unsupported, as it cuts out a crucial security feature.
-# Disabling LUKS and shipping Calamares without a correctly configured GRUB2
-# and initramfs is considered suboptimal use of the Calamares software. The
-# Calamares team will not provide user support for any potential issue that
-# may arise as a consequence of setting this option to false.
-# It is strongly recommended that system integrators put in the work to support
-# LUKS unlocking support in GRUB2 and initramfs/dracut/mkinitcpio/etc.
-# For more information on setting up GRUB2 for Calamares with LUKS, see
-# the Calamares website at https://calamares.io/docs/partitions/#luks .
-#
-# If nothing is specified, LUKS is enabled in automated modes.
-#enableLuksAutomatedPartitioning:    true
-
-# When enableLuksAutomatedPartitioning is true, this option will pre-check
-# encryption checkbox. This option is only usefull to help people to not forget
-# to cypher their disk when installing in enterprise (for example).
-#preCheckEncryption:    false
-
-# LVM support
-#
-# There is only one sub-key available, *enable* (defaults to true)
-# which can be used to show (default) or hide the LVM buttons in the partitioning module.
-lvm:
-    enable: true
-
-# Partition layout.
-#
-# This optional setting specifies a custom partition layout.
-#
-# If nothing is specified, the default partition layout is a single partition
-# for root that uses 100% of the space and uses the filesystem defined by
-# defaultFileSystemType.
-#
-# Note: the EFI system partition is prepended automatically to the layout if
-# needed; the swap partition is appended to the layout if enabled (selections
-# "small" or "suspend" in *userSwapChoices*).
-#
-# Otherwise, the partition layout is defined as follow:
-#
-# partitionLayout:
-#     - name: "rootfs"
-#       type: "4f68bce3-e8cd-4db1-96e7-fbcaf984b709"
-#       filesystem: "ext4"
-#       noEncrypt: false
-#       mountPoint: "/"
-#       size: 20%
-#       minSize: 500M
-#       maxSize: 10G
-#       attributes: 0xffff000000000003
-#     - name: "home"
-#       type: "933ac7e1-2eb4-4f13-b844-0e14e2aef915"
-#       filesystem: "ext4"
-#       noEncrypt: false
-#       mountPoint: "/home"
-#       size: 3G
-#       minSize: 1.5G
-#       features:
-#         64bit: false
-#         casefold: true
-#     - name: "data"
-#       filesystem: "fat32"
-#       mountPoint: "/data"
-#       features:
-#         sector-size: 4096
-#         sectors-per-cluster: 128
-#       size: 100%
-#
-# There can be any number of partitions, each entry having the following attributes:
-#   - name: filesystem label
-#           and
-#           partition name (gpt only; since KPMCore 4.2.0)
-#   - uuid: partition uuid (optional parameter; gpt only; requires KPMCore >= 4.2.0)
-#   - type: partition type (optional parameter; gpt only; requires KPMCore >= 4.2.0)
-#   - attributes: partition attributes (optional parameter; gpt only; requires KPMCore >= 4.2.0)
-#   - filesystem: filesystem type (optional parameter)
-#       - if not set at all, treat as "unformatted"
-#       - if "unformatted", no filesystem will be created
-#       - if "unknown" (or an unknown FS name, like "elephant") then the
-#         default filesystem type, or the user's choice, will be applied instead
-#         of "unknown" (e.g. the user might pick ext4, or xfs).
-#   - noEncrypt: whether this partition is exempt from encryption if enabled (optional parameter; default is false)
-#   - mountPoint: partition mount point (optional parameter; not mounted if unset)
-#   - size: partition size in bytes (append 'K', 'M' or 'G' for KiB, MiB or GiB)
-#           or
-#           % of the available drive space if a '%' is appended to the value
-#   - minSize: minimum partition size (optional parameter)
-#   - maxSize: maximum partition size (optional parameter)
-#   - features: filesystem features (optional parameter; requires KPMCore >= 4.2.0)
-#       name: boolean or integer or string
-
-# Checking for available storage
-#
-# This overlaps with the setting of the same name in the welcome module's
-# requirements section. If nothing is set by the welcome module, this
-# value is used instead. It is still a problem if there is no required
-# size set at all, and the replace and resize options will not be offered
-# if no required size is set.
-#
-# The value is in Gibibytes (GiB).
-#
-# BIG FAT WARNING: except for OEM-phase-0 use, you should be using
-#                  the welcome module, **and** configure this value in
-#                  `welcome.conf`, not here.
-# requiredStorage: 3.5
+defaultFileSystemType:  "btrfs"
+availableFileSystemTypes:  ["btrfs","ext4","f2fs","xfs"]

package/conf/distros/archlinux/calamares/settings.yml

@@ -7,9 +7,6 @@ instances:
 - id: disable-grub-btrfs
   module: shellprocess
   config: shellprocess@disable-grub-btrfs.conf
-- id: sync
-  module: shellprocess
-  config: shellprocess@sync.conf
 
 sequence:
   # Phase 1 - prepare.
@@ -48,7 +45,6 @@ sequence:
       - displaymanager 
       - hwclock
       - shellprocess@disable-grub-btrfs      
-      - shellprocess@sync
       - grubcfg
       - bootloader
       - packages

package/conf/distros/fedora/calamares/modules/README.md

@@ -0,0 +1,4 @@
+# Fedora calamares configuration
+
+We have a problem with the Boot Loader Specification (BLS) standard. I created a simple [calamares module](../calamares-modules/bootloaderspecification), but it needs to be refined.
+

package/conf/distros/fedora/calamares/modules/bootloader.yml

@@ -83,4 +83,5 @@ efiBootMgr: "efibootmgr"
 installEFIFallback: true
 
 # Optionally install both BIOS and UEFI GRUB bootloaders.
-installHybridGRUB: false
+installHybridGRUB: false
+

package/conf/distros/fedora/calamares/modules/mount.yml

@@ -50,6 +50,9 @@ extraMounts:
 btrfsSubvolumes:
     - mountPoint: /
       subvolume: /@
+      # As an alternative:
+      #
+      # subvolume: ""
     - mountPoint: /home
       subvolume: /@home
     - mountPoint: /var/cache
@@ -115,4 +118,6 @@ mountOptions:
     - filesystem: btrfs
       options: [ defaults, compress=zstd:1 ]
     - filesystem: btrfs_swap
-      options: [ defaults, noatime ]
+      options: [ defaults, noatime ]
+
+

package/conf/distros/fedora/calamares/settings.yml

@@ -37,6 +37,11 @@ disable-cancel-during-exec: false
 #
 quit-at-end: false
 
+
+
+#
+# SEQUENCE
+#
 sequence:
   # Phase 1 - prepare.
   # View modules are shown as UI pages, jobs from job modules
@@ -73,9 +78,9 @@ sequence:
       - hwclock
       - services-systemd 
       - dracut
+      - bootloader
       - bootloaderspecification
       - grubcfg
-      - bootloader
       - packages
       - removeuser
       - umount

package/conf/distros/focal/calamares/modules/mount.yml

@@ -1,5 +1,21 @@
-# Ubuntu jammy 22.04
+# SPDX-License-Identifier: GPL-3.0-only OR LicenseRef-KDE-Accepted-GPL
+# SPDX-FileCopyrightText: 2018-2019 Harald Sitter <sitter@kde.org>
+#
+# Mount filesystems in the target (generally, before treating the
+# target as a usable chroot / "live" system). Filesystems are
+# automatically mounted from the partitioning module. Filesystems
+# listed here are **extra**. The filesystems listed in *extraMounts*
+# are mounted in all target systems. The filesystems listed in
+# *extraMountsEfi* are mounted in the target system **only** if
+# the host machine uses UEFI.
 ---
+# Extra filesystems to mount. The key's value is a list of entries; each
+# entry has four keys:
+#   - device    The device node to mount
+#   - fs        The filesystem type to use
+#   - mountPoint Where to mount the filesystem
+#   - options (optional) Extra options to pass to mount(8)
+#
 extraMounts:
     - device: proc
       fs: proc
@@ -9,15 +25,17 @@ extraMounts:
       mountPoint: /sys
     - device: /dev
       mountPoint: /dev
-      options: {{{options}}}
+      options: [ bind ]
     - device: tmpfs
       fs: tmpfs
       mountPoint: /run
     - device: /run/udev
       mountPoint: /run/udev
-      options: {{{options}}}
-
-extraMountsEfi:
+      options: [ bind ]
+    - device: /run/systemd
+      mountPoint: /run/systemd
+      options: [ bind ]
     - device: efivarfs
       fs: efivarfs
       mountPoint: /sys/firmware/efi/efivars
+      efi: true

package/conf/distros/noble/calamares/libexec/calamares-l10n-helper.sh

@@ -2,6 +2,8 @@
 # SPDX-FileCopyrightText: 2018-2019 Harald Sitter <sitter@kde.org>
 # SPDX-License-Identifier: GPL-3.0-only OR LicenseRef-KDE-Accepted-GPL
 
+# apt install language-selector-common
+
 # calamares currently has subpar l10n capabilites.
 # this helper is ment to aid in getting very primitive language support
 # of the ground by using a helper from ubuntu's language-selector-common
@@ -31,5 +33,6 @@ without_ext=$(echo $LANG | cut -d. -f1)
 /usr/sbin/locale-gen --keep-existing "$LC_TIME"
 
 apt-get update || true
+# apt-get install language-selector-common || true
 missing=$(check-language-support --language="$without_ext")
 apt-get install -y $missing || true

package/conf/distros/opensuse/calamares/calamares-modules/bootloaderspecification/bootloaderspecification.sh

@@ -26,7 +26,7 @@ BLS_FILE="/boot/loader/entries/${MACHINE_ID}-${KERNEL_VERSION}.conf"
 
 # Scrivi il contenuto nel file usando un "Here Document" (cat << EOF)
 cat > "${BLS_FILE}" << EOF
-title OpenSUSE Linux ($KERNEL_VERSION)
+title Fedora Linux ($KERNEL_VERSION)
 version $KERNEL_VERSION
 linux /boot/vmlinuz-${KERNEL_VERSION}
 initrd /boot/initramfs-${KERNEL_VERSION}.img

package/conf/distros/opensuse/calamares/modules/dracut.mustache

@@ -0,0 +1,7 @@
+# A mustache template for module: packages.conf
+---
+initramfsName: {{{initrd}}}
+
+# Optional: define a list of strings to be passed as arguments to Dracut
+# By default, -f is always included
+options: [ "-f" ]

package/conf/distros/opensuse/calamares/modules/packages.mustache

@@ -1,3 +1,4 @@
+# A mustache template for module: packages.conf
 ---
 backend: {{{backend}}}
 

package/conf/distros/opensuse/calamares/modules/removeuser.mustache

@@ -1,2 +1,3 @@
+# A mustache template for module: removeuser.conf
 ---
-username: linux
+username: {{{username}}}

package/conf/distros/opensuse/calamares/modules/unpackfs.mustache

@@ -1,5 +1,6 @@
+# A mustache template for module: unpackfs.conf
 ---
 unpack:
-    -   source: {{source}}
+    -   source: {{{source}}}
         sourcefs: "squashfs"
         destination: ""

package/conf/distros/opensuse/calamares/settings.yml

@@ -9,7 +9,7 @@ sequence:
   - users
   - summary
 - exec:
-  - partition
+  - partition 
   - mount
   - unpackfs
   - machineid