penguins-eggs 10.0.57 → 10.1.0

package/conf/distros/bionic/calamares/modules/users.yml

@@ -11,9 +11,9 @@ defaultGroups:
   - video
   - plugdev
   - netdev
-  - lpadmin
-  - scanner
-  - bluetooth
+  # lpadmin
+  # scanner
+  # bluetooth
 autologinGroup: autologin
 sudoersGroup: sudo
 setRootPassword: false

package/conf/distros/buster/calamares/calamares-modules/cleanup/cleanup.sh

@@ -9,5 +9,12 @@ if [ -f "$CHROOT"/etc/issue ]; then
     sed -i '/^eggs-start-message/,/^\eggs-end-message/{/^#/!{/^\$/!d;};}' "$CHROOT"/etc/issue
 fi
 
+# remove calamares link desktop
 rm -f $CHROOT/usr/share/applications/install-system.desktop
-rm -f $CHROOT/etc/systemd/system/getty@.service.d/override.conf # remove cli-autologin
+
+# remove CLI autologin if exists
+rm -f $CHROOT/etc/systemd/system/getty@.service.d/override.conf
+
+# remove 10-installer if exists
+rm -f $CHROOT/etc/sudoers.d/10-installer
+

package/conf/distros/buster/calamares/modules/partition.yml

@@ -1,14 +1,50 @@
-# Debian/Buster et others
-# partition.yaml
----
-# This setting specifies the mount point of the EFI system partition. Some
-# distributions (Fedora, Debian, Manjaro, etc.) use /boot/efi, others (KaOS,
-# etc.) use just /boot.
-efiSystemPartition:     "/boot/efi"
-
-# This optional setting specifies the size of the EFI system partition.
-# If nothing is specified, the default size of 300MiB will be used.
-# efiSystemPartitionSize:     300M
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+
+# Options for EFI system partition.
+#
+# - *mountPoint*
+#   This setting specifies the mount point of the EFI system partition. Some
+#   distributions (Fedora, Debian, Manjaro, etc.) use /boot/efi, others (KaOS,
+#   etc.) use just /boot.
+#
+#   Defaults to "/boot/efi", may be empty (but weird effects ensue)
+# - *recommendedSize*
+#   This optional setting specifies the size of the EFI system partition.
+#   If nothing is specified, the default size of 300MiB will be used.
+#   When writing quantities here, M is treated as MiB, and if you really
+#   want one-million (10^6) bytes, use MB.
+# - *minimumSize*
+#   This optional setting specifies the absolute minimum size of the EFI
+#   system partition. If nothing is specified, the *recommendedSize*
+#   is used instead.
+# - *label*
+#   This optional setting specifies the name of the EFI system partition (see
+#   PARTLABEL; gpt only; requires KPMCore >= 4.2.0).
+#   If nothing is specified, the partition name is left unset.
+#
+# Going below the *recommended* size is allowed, but the user will
+# get a warning that it might not work. Going below the *minimum*
+# size is not allowed and the user will be told it will not work.
+#
+# Both quantities must be at least 32MiB, this is enforced by the EFI
+# spec. If minimum is not specified, it defaults to the recommended
+# size. Distro's that allow more user latitude can set the minimum lower.
+efi:
+    mountPoint:         "/boot/efi"
+    recommendedSize:    300MiB
+    minimumSize:        32MiB
+    label:              "EFI"
+
+# Deprecated alias of efi.mountPoint
+# efiSystemPartition:     "/boot/efi"
+
+# Deprecated alias of efi.recommendedSize
+# efiSystemPartitionSize:          300MiB
+
+# Deprecated alias of efi.label
+# efiSystemPartitionName:     EFI
 
 # In autogenerated partitioning, allow the user to select a swap size?
 # If there is exactly one choice, no UI is presented, and the user
@@ -51,6 +87,30 @@ userSwapChoices:
 # ensureSuspendToDisk:    true
 # neverCreateSwap:        false
 
+# This setting specifies the LUKS generation (i.e LUKS1, LUKS2) used internally by
+# cryptsetup when creating an encrypted partition.
+#
+# This option is set to luks1 by default, as grub doesn't support LUKS2 + Argon2id
+# currently. On the other hand grub does support LUKS2 with PBKDF2 and could therefore be
+# also set to luks2. Also there are some patches for grub and Argon2.
+# See: https://aur.archlinux.org/packages/grub-improved-luks2-git
+#
+# Choices: luks1, luks2 (in addition, "luks" means "luks1")
+#
+# The default is luks1
+#
+luksGeneration: luks1
+
+# This setting determines if encryption should be allowed when using zfs.  This
+# setting has no effect unless zfs support is provided.
+#
+# This setting is to handle the fact that some bootloaders(such as grub) do not
+# support zfs encryption.
+#
+# The default is true
+#
+# allowZfsEncryption: true
+
 # Correctly draw nested (e.g. logical) partitions as such.
 drawNestedPartitions:   false
 
@@ -67,6 +127,15 @@ alwaysShowPartitionLabels: true
 # If nothing is specified, manual partitioning is enabled.
 #allowManualPartitioning:   true
 
+# Show not encrypted boot partition warning.
+#
+# When set to false, this option does not show the
+# "Boot partition not encrypted" warning when encrypting the
+# root partition but not /boot partition.
+#
+# If nothing is specified, the warning is shown.
+#showNotEncryptedBootMessage:   true
+
 # Initial selection on the Choice page
 #
 # There are four radio buttons (in principle: erase, replace, alongside, manual),
@@ -87,6 +156,13 @@ initialPartitioningChoice: none
 # one of the items from the options.
 initialSwapChoice: none
 
+# armInstall
+#
+# Leaves 16MB empty at the start of a drive when partitioning
+# where usually the u-boot loader goes
+#
+# armInstall: false
+
 # Default partition table type, used when a "erase" disk is made.
 #
 # When erasing a disk, a new partition table is created on disk.
@@ -94,11 +170,12 @@ initialSwapChoice: none
 # manual partitioning, this partition table exists already on disk
 # and it is left unmodified.
 #
-# Suggested values: gpt, msdos
+# Possible values: gpt, msdos (or other names defined by KPMcore).
+# Names are case-sensitive.
+#
 # If nothing is specified, Calamares defaults to "gpt" if system is
-# efi or "msdos".
+# efi or "msdos" otherwise.
 #
-# Names are case-sensitive and defined by KPMCore.
 # defaultPartitionTableType: msdos
 
 # Requirement for partition table type
@@ -106,7 +183,8 @@ initialSwapChoice: none
 # Restrict the installation on disks that match the type of partition
 # tables that are specified.
 #
-# Possible values: msdos, gpt. Names are case-sensitive and defined by KPMCore.
+# Possible values: msdos, gpt (or other names defined by KPMcore).
+# Names are case-sensitive.
 #
 # If nothing is specified, Calamares defaults to both "msdos" and "gpt".
 #
@@ -117,8 +195,8 @@ initialSwapChoice: none
 
 # Default filesystem type, used when a "new" partition is made.
 #
-# When replacing a partition, the existing filesystem inside the
-# partition is retained. In other cases, e.g. Erase and Alongside,
+# When replacing a partition, the new filesystem type will be from the
+# defaultFileSystemType value. In other cases, e.g. Erase and Alongside,
 # as well as when using manual partitioning and creating a new
 # partition, this filesystem type is pre-selected. Note that
 # editing a partition in manual-creation mode will not automatically
@@ -143,7 +221,50 @@ defaultFileSystemType:  "ext4"
 #
 # If not specified at all, uses *defaultFileSystemType* without a
 # warning (this matches traditional no-choice-available behavior best).
-availableFileSystemTypes:  ["ext4"]
+# availableFileSystemTypes:  ["ext4","f2fs"]
+
+# Per-directory filesystem restrictions.
+#
+# This optional setting specifies what filesystems the user can and cannot use
+# for various directories and mountpoints when using manual partitioning.
+#
+# If nothing is specified, the only restriction enforced by default is that
+# the EFI system partition must use the fat32 filesystem.
+#
+# Otherwise, the filesystem restrictions are defined as follow:
+#
+# directoryFilesystemRestrictions:
+#     - directory: "any"
+#       allowedFilesystemTypes: ["all"]
+#     - directory: "/"
+#       allowedFilesystemTypes: ["ext4","xfs","btrfs","jfs","f2fs"]
+#     - mountpoint: "efi"
+#       allowedFilesystemTypes: ["fat32"]
+#       onlyWhenMountpoint: true
+#
+# There can be any number of mountpoints listed, each entry having the
+# following attributes:
+#   - mountpoint: mountpoint's full path
+#                 or
+#                 "any" to specify a global whitelist that applies to all
+#                 mountpoints
+#                 or
+#                 "efi" to specify a whitelist specific to the EFI system
+#                 partition, wherever that partition is located
+#   - allowedFilesystemTypes: the list of all filesystems valid for this
+#                             mountpoint. If the list contains exactly one
+#                             element, and that element is the special value
+#                             "any", all filesystem types recognized by
+#                             Calamares will be allowed.
+#   - onlyWhenMountpoint: Whether the restriction should apply only when the
+#                         specified directory is a mountpoint. When set to
+#                         true, Calamares will only enforce the listed
+#                         restrictions when the user makes a separate partition
+#                         for this directory and assigns the mountpoint
+#                         accordingly. When set to false, Calamares will
+#                         ensure this directory uses the specified filesystem
+#                         even if the directory is part of a filesystem on a
+#                         different mountpoint. Defaults to false.
 
 # Show/hide LUKS related functionality in automated partitioning modes.
 # Disable this if you choose not to deploy early unlocking support in GRUB2
@@ -164,6 +285,18 @@ availableFileSystemTypes:  ["ext4"]
 # If nothing is specified, LUKS is enabled in automated modes.
 #enableLuksAutomatedPartitioning:    true
 
+# When enableLuksAutomatedPartitioning is true, this option will pre-check
+# encryption checkbox. This option is only usefull to help people to not forget
+# to cypher their disk when installing in enterprise (for exemple).
+#preCheckEncryption:    false
+
+# LVM support
+#
+# There is only one sub-key available, *enable* (defaults to true)
+# which can be used to show (default) or hide the LVM buttons in the partitioning module.
+lvm:
+    enable: true
+
 # Partition layout.
 #
 # This optional setting specifies a custom partition layout.
@@ -172,9 +305,9 @@ availableFileSystemTypes:  ["ext4"]
 # for root that uses 100% of the space and uses the filesystem defined by
 # defaultFileSystemType.
 #
-# Note: the EFI system partition is prepend automatically to the layout if
-# needed; the swap partition is appended to the layout if enabled (small of
-# suspend).
+# Note: the EFI system partition is prepended automatically to the layout if
+# needed; the swap partition is appended to the layout if enabled (selections
+# "small" or "suspend" in *userSwapChoices*).
 #
 # Otherwise, the partition layout is defined as follow:
 #
@@ -182,14 +315,16 @@ availableFileSystemTypes:  ["ext4"]
 #     - name: "rootfs"
 #       type: "4f68bce3-e8cd-4db1-96e7-fbcaf984b709"
 #       filesystem: "ext4"
+#       noEncrypt: false
 #       mountPoint: "/"
 #       size: 20%
 #       minSize: 500M
 #       maxSize: 10G
 #       attributes: 0xffff000000000003
 #     - name: "home"
-#       type = "933ac7e1-2eb4-4f13-b844-0e14e2aef915"
+#       type: "933ac7e1-2eb4-4f13-b844-0e14e2aef915"
 #       filesystem: "ext4"
+#       noEncrypt: false
 #       mountPoint: "/home"
 #       size: 3G
 #       minSize: 1.5G
@@ -217,6 +352,7 @@ availableFileSystemTypes:  ["ext4"]
 #       - if "unknown" (or an unknown FS name, like "elephant") then the
 #         default filesystem type, or the user's choice, will be applied instead
 #         of "unknown" (e.g. the user might pick ext4, or xfs).
+#   - noEncrypt: whether this partition is exempt from encryption if enabled (optional parameter; default is false)
 #   - mountPoint: partition mount point (optional parameter; not mounted if unset)
 #   - size: partition size in bytes (append 'K', 'M' or 'G' for KiB, MiB or GiB)
 #           or
@@ -239,4 +375,4 @@ availableFileSystemTypes:  ["ext4"]
 # BIG FAT WARNING: except for OEM-phase-0 use, you should be using
 #                  the welcome module, **and** configure this value in
 #                  `welcome.conf`, not here.
-requiredStorage: 6.0
+# requiredStorage: 3.5

package/conf/distros/buster/calamares/modules/removeuser.yml

@@ -12,4 +12,4 @@
 # continues as normal.
 ---
 # Username in the target system to be removed.
-username: node
+username: {{username}}

package/conf/distros/buster/calamares/modules/users.yml

@@ -10,9 +10,9 @@ defaultGroups:
   - video
   - plugdev
   - netdev
-  - lpadmin
-  - scanner
-  - bluetooth
+  # lpadmin
+  # scanner
+  # bluetooth
 autologinGroup: autologin
 sudoersGroup: sudo
 setRootPassword: true

package/conf/distros/fedora/calamares/modules/users.yml

@@ -10,9 +10,9 @@ defaultGroups:
   - video
   - plugdev
   - netdev
-  - lpadmin
-  - scanner
-  - bluetooth
+  # lpadmin
+  # scanner
+  # bluetooth
 autologinGroup: autologin
 sudoersGroup: sudo
 setRootPassword: true

package/conf/distros/noble/calamares/modules/focal-jammy/users.yml

@@ -10,9 +10,9 @@ defaultGroups:
   - video
   - plugdev
   - netdev
-  - lpadmin
-  - scanner
-  - bluetooth
+  # lpadmin
+  # scanner
+  # bluetooth
 autologinGroup: autologin
 sudoersGroup: sudo
 setRootPassword: false

package/conf/distros/opensuse/calamares/modules/users.yml

@@ -10,9 +10,9 @@ defaultGroups:
   - video
   - plugdev
   - netdev
-  - lpadmin
-  - scanner
-  - bluetooth
+  # lpadmin
+  # scanner
+  # bluetooth
 autologinGroup: autologin
 sudoersGroup: sudo
 setRootPassword: true

package/conf/distros/rolling/calamares/modules/users.yml

@@ -11,9 +11,9 @@ defaultGroups:
   - video
   - plugdev
   - netdev
-  - lpadmin
-  - scanner
-  - bluetooth
+  # lpadmin
+  # scanner
+  # bluetooth
 autologinGroup: autologin
 sudoersGroup: wheel
 setRootPassword: true

package/conf/eggs.yaml

@@ -46,7 +46,7 @@ compression: xz
 ssh_pass: false
 
 # timezone
-timezone: Europe/Rome
+timezone: America/New_York
 
 # it's still used?
 pmount_fixed: false

package/conf/exclude.list.d/master.list

@@ -77,6 +77,7 @@ etc/skel/.ZAP/*
 lost+found
 swap/*
 swapfile
+timeshift 
 
 {{{usr_list}}}
 

package/conf/krill.yaml

@@ -19,6 +19,14 @@ installationDevice: ''
 installationMode: 'standard'
 filesystemType: 'ext4'
 userSwapChoice: 'small'
+lvmOptions:
+  vgName: ''
+  lvRootName: ''
+  lvRootFSType: ''
+  lvRootSize: ''
+  lvDataName: ''
+  lvDataFSType: ''
+  lvDataMountPoint: ''
 
 # users (Here you can put your default user, password, etc)
 name: 'artisan'

package/conf/love.yaml

@@ -1,8 +1,8 @@
 # Penguins' eggs
 # love.yaml
 ---
-- sudo eggs kill
-- sudo eggs dad --default
-- sudo eggs tools clean
-- sudo eggs produce --pendrive --addons adapt
+- eggs kill
+- eggs dad --default
+- eggs tools clean
+- eggs produce --pendrive --addons adapt
 

package/package.json

@@ -2,62 +2,63 @@
   "name": "penguins-eggs",
   "shortName": "eggs",
   "description": "A remaster system tool, compatible with Arch, Debian, Devuan, Ubuntu and others",
-  "version": "10.0.57",
+  "version": "10.1.0",
   "author": "Piero Proietti",
   "bin": {
     "eggs": "./bin/run.js"
   },
   "bugs": "https://github.com/pieroproietti/penguins-eggs/issues",
   "dependencies": {
-    "@oclif/core": "^4.1.0",
-    "@oclif/plugin-autocomplete": "^3.2.14",
-    "@oclif/plugin-help": "^6.2.19",
-    "@oclif/plugin-version": "^2.2.18",
-    "ansis": "^3.4.0",
-    "axios": "^1.7.9",
+    "@oclif/core": "^4.2.10",
+    "@oclif/plugin-autocomplete": "^3.2.26",
+    "@oclif/plugin-help": "^6.2.27",
+    "@oclif/plugin-version": "^2.2.27",
+    "ansis": "^3.17.0",
+    "axios": "^1.8.4",
     "chalk": "^5.4.0",
-    "cli-cursor": "^4.0.0",
+    "cli-cursor": "^5.0.0",
     "debug": "^4.4.0",
-    "ink": "^5.0.1",
+    "ink": "^5.2.0",
     "ink-progress-bar": "^3.0.0",
     "ink-spinner": "^5.0.0",
-    "inquirer": "^9.3.6",
+    "inquirer": "^9.3.7",
     "js-yaml": "^4.1.0",
     "mustache": "^4.2.0",
     "netmask": "^2.0.2",
     "node-proxy-dhcpd": "0.1.2",
     "node-static": "^0.7.11",
     "react": "^18.3.1",
-    "shelljs": "^0.8.5",
-    "systeminformation": "^5.23.14",
+    "read": "^4.1.0",
+    "shelljs": "^0.9.2",
+    "systeminformation": "^5.25.11",
     "tftp": "^0.1.2"
   },
   "devDependencies": {
     "@oclif/prettier-config": "^0.2.1",
-    "@oclif/test": "^4.1.4",
-    "@types/chai": "^4.3.19",
+    "@oclif/test": "^4.1.12",
+    "@types/chai": "^5.0.1",
     "@types/debug": "^4.1.12",
     "@types/inquirer": "^9.0.7",
     "@types/js-yaml": "^4.0.9",
     "@types/mocha": "^10.0.8",
     "@types/mustache": "^4.2.5",
     "@types/netmask": "^2.0.5",
-    "@types/node": "^22.10.2",
+    "@types/node": "^22.14.1",
     "@types/node-static": "^0.7.11",
-    "@types/react": "^18.3.12",
+    "@types/react": "18.3.18",
+    "@types/read": "^0.0.32",
     "@types/shelljs": "^0.8.15",
-    "chai": "^5.1.2",
-    "eslint": "^8.57.0",
-    "eslint-config-oclif": "^5.2.1",
-    "eslint-config-oclif-typescript": "^3.1.13",
-    "eslint-config-prettier": "^9.1.0",
-    "mocha": "^10.8.1",
-    "oclif": "^4.17.0",
-    "perrisbrewery": "^10.0.2",
-    "prettier": "^3.4.2",
-    "shx": "^0.3.4",
+    "chai": "^5.2.0",
+    "eslint": "^9.25.0",
+    "eslint-config-oclif": "^6.0.44",
+    "eslint-config-prettier": "^10.0.2",
+    "mocha": "^11.1.0",
+    "oclif": "^4.17.44",
+    "perrisbrewery": "^10.1.2",
+    "prettier": "^3.5.3",
+    "shx": "^0.4.0",
     "ts-node": "10.9.2",
-    "typescript": "^5.5.4"
+    "typescript": "^5.7.3"
   },
   "engines": {
     "node": ">=16.0.0"
@@ -72,9 +73,12 @@
     "/dracut",
     "/eui",
     "/ipxe",
+    "/maker",
     "/manpages",
     "/mkinitcpio",
     "/mkinitfs",
+    "/perrisbrewery",
+    "/pods",
     "/scripts",
     "/syslinux"
   ],
@@ -109,12 +113,12 @@
     "_postpack": "shx rm -f oclif.manifest.json",
     "_prepack": "oclif manifest && ocl -t linux-x64",
     "build": "shx rm -rf dist && tsc -b",
-    "deb": "tsc -p . && oclif manifest && pb deb",
+    "deb": "shx rm -rf dist && tsc -p . && oclif manifest && pb deb --release $(cat ./release)",
     "format": "prettier --write \"+(src|test)/**/*.+(ts|js|json)\"",
     "lint": "eslint . --ext .ts",
     "manifest": "oclif manifest",
     "posttest": "pnpm run lint",
-    "tarballs": "shx rm -rf dist && tsc -p . && oclif manifest && oclif pack tarballs -t linux-x64 --no-xz -r .",
+    "tarballs": "shx rm -rf dist && tsc -p . && oclif manifest && oclif pack tarballs -t linux-x64 --no-xz -r . && pb tarballs --release $(cat ./release)",
     "test": "mocha --forbid-only \"test/**/*.test.ts\"",
     "version": "oclif readme && git add README.md"
   }

package/perrisbrewery/scripts/postinst

@@ -0,0 +1,98 @@
+#!/bin/sh
+# postinst script for penguins-eggs_9.7.8-1
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <postinst> `abort-remove'
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see https://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+# echo ">>> $0 $1 $2 $3 $4<<<"
+
+pkgname="penguins-eggs"
+
+case "$1" in
+    configure)
+        # Adding bash-completion Debian/Devuan/Ubuntu /etc/bash_completion.d/
+        if [ -d "/etc/bash_completion.d/" ]; then
+            if [ -f "/usr/lib/$pkgname/scripts/eggs.bash" ]; then
+                cp /usr/lib/$pkgname/scripts/eggs.bash /etc/bash_completion.d/
+            fi
+        fi    
+
+        # Adding bash-completion elementary /usr/share/bash-completion/completions/
+        if [ -d "/usr/share/bash-completion/completions/" ]; then
+            if [ -f "/usr/lib/$pkgname/scripts/eggs.bash" ]; then
+                cp /usr/lib/$pkgname/scripts/eggs.bash /usr/share/bash-completion/completions/
+            fi
+        fi    
+
+        # Adding zsh-completion for eggs
+        if [ -d "/usr/share/zsh/functions/Completion/Zsh/" ]; then
+            if [ -f "/usr/lib/$pkgname/scripts/_eggs" ]; then
+                cp /usr/lib/$pkgname/scripts/_eggs /usr/share/zsh/functions/Completion/Zsh/
+            fi
+        fi
+
+        # Install man page
+        if [ -f "/usr/lib/$pkgname/manpages/doc/man/eggs.1.gz" ]; then
+            install -Dm644 /usr/lib/$pkgname/manpages/doc/man/eggs.1.gz /usr/share/man/man1
+        fi
+
+
+        # link to adapt
+        if [ -f "/usr/lib/$pkgname/addons/eggs/adapt/bin/adapt" ]; then
+            install /usr/lib/$pkgname/addons/eggs/adapt/bin/adapt /usr/bin
+        fi
+
+        # link to love
+        if [ -f "/usr/lib/$pkgname/scripts/love" ]; then
+            install /usr/lib/$pkgname/scripts/love /usr/bin
+        fi
+
+        # link to resy
+        if [ -f "/usr/lib/$pkgname/scripts/resy" ]; then
+            install /usr/lib/$pkgname/scripts/resy /usr/sbin
+        fi
+
+        # revitalize mom
+        if [ -f "/usr/lib/$pkgname/scripts/mom.sh" ]; then  
+            chmod +x /usr/lib/$pkgname/scripts/mom.sh
+        fi
+
+        # revitalize eui
+        if [ -d "/usr/lib/$pkgname/eui" ]; then  
+            chmod +x /usr/lib/$pkgname/eui/eui-create-image.sh
+            chmod +x /usr/lib/$pkgname/eui/eui-start.sh
+            chmod 0400 /usr/lib/$pkgname/eui/eui-users
+        fi
+
+
+        eggs config --nointeractive
+        echo "penguins-eggs was installed..." 
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0