penguins-eggs 10.0.35 → 10.0.37

package/conf/distros/fedora/calamares/modules/packages.yml

@@ -0,0 +1,6 @@
+# # Alpine 3.18
+# packages
+---
+backend: apk
+
+{{operations}}

package/conf/distros/fedora/calamares/modules/partition.yml

@@ -0,0 +1,242 @@
+# # Alpine 3.18
+# partition.yaml
+---
+# This setting specifies the mount point of the EFI system partition. Some
+# distributions (Fedora, Debian, Manjaro, etc.) use /boot/efi, others (KaOS,
+# etc.) use just /boot.
+efiSystemPartition:     "/boot/efi"
+
+# This optional setting specifies the size of the EFI system partition.
+# If nothing is specified, the default size of 300MiB will be used.
+# efiSystemPartitionSize:     300M
+
+# In autogenerated partitioning, allow the user to select a swap size?
+# If there is exactly one choice, no UI is presented, and the user
+# cannot make a choice -- this setting is used. If there is more than
+# one choice, a UI is presented.
+#
+# Legacy settings *neverCreateSwap* and *ensureSuspendToDisk* correspond
+# to values of *userSwapChoices* as follows:
+#    - *neverCreateSwap* is true, means [none]
+#    - *neverCreateSwap* is false, *ensureSuspendToDisk* is false, [small]
+#    - *neverCreateSwap* is false, *ensureSuspendToDisk* is true, [suspend]
+#
+# Autogenerated swap sizes are as follows:
+#    - *suspend*: Swap is always at least total memory size,
+#      and up to 4GiB RAM follows the rule-of-thumb 2 * memory;
+#      from 4GiB to 8 GiB it stays steady at 8GiB, and over 8 GiB memory
+#      swap is the size of main memory.
+#    - *small*: Follows the rules above, but Swap is at
+#      most 8GiB, and no more than 10% of available disk.
+# In both cases, a fudge factor (usually 10% extra) is applied so that there
+# is some space for administrative overhead (e.g. 8 GiB swap will allocate
+# 8.8GiB on disk in the end).
+#
+# If *file* is enabled here, make sure to have the *fstab* module
+# as well (later in the exec phase) so that the swap file is
+# actually created.
+userSwapChoices:
+    - none      # Create no swap, use no swap
+    - small     # Up to 4GB
+    - suspend   # At least main memory size
+    # - reuse     # Re-use existing swap, but don't create any (unsupported right now)
+    - file      # To swap file instead of partition
+
+# This optional setting specifies the name of the swap partition (see
+# PARTLABEL; gpt only; requires KPMCore >= 4.2.0).
+# If nothing is specified, the partition name is left unset.
+# swapPartitionName:      swap
+
+# LEGACY SETTINGS (these will generate a warning)
+# ensureSuspendToDisk:    true
+# neverCreateSwap:        false
+
+# Correctly draw nested (e.g. logical) partitions as such.
+drawNestedPartitions:   false
+
+# Show/hide partition labels on manual partitioning page.
+alwaysShowPartitionLabels: true
+
+# Allow manual partitioning.
+#
+# When set to false, this option hides the "Manual partitioning" button,
+# limiting the user's choice to "Erase", "Replace" or "Alongside".
+# This can be useful when using a custom partition layout we don't want
+# the user to modify.
+#
+# If nothing is specified, manual partitioning is enabled.
+#allowManualPartitioning:   true
+
+# Initial selection on the Choice page
+#
+# There are four radio buttons (in principle: erase, replace, alongside, manual),
+# and you can pick which of them, if any, is initially selected. For most
+# installers, "none" is the right choice: it makes the user pick something specific,
+# rather than accidentally being able to click past an important choice (in particular,
+# "erase" is a dangerous choice).
+#
+# The default is "none"
+#
+initialPartitioningChoice: none
+#
+# Similarly, some of the installation choices may offer a choice of swap;
+# the available choices depend on *userSwapChoices*, above, and this
+# setting can be used to pick a specific one.
+#
+# The default is "none" (no swap) if that is one of the enabled options, otherwise
+# one of the items from the options.
+initialSwapChoice: none
+
+# Default partition table type, used when a "erase" disk is made.
+#
+# When erasing a disk, a new partition table is created on disk.
+# In other cases, e.g. Replace and Alongside, as well as when using
+# manual partitioning, this partition table exists already on disk
+# and it is left unmodified.
+#
+# Suggested values: gpt, msdos
+# If nothing is specified, Calamares defaults to "gpt" if system is
+# efi or "msdos".
+#
+# Names are case-sensitive and defined by KPMCore.
+# defaultPartitionTableType: msdos
+
+# Requirement for partition table type
+#
+# Restrict the installation on disks that match the type of partition
+# tables that are specified.
+#
+# Possible values: msdos, gpt. Names are case-sensitive and defined by KPMCore.
+#
+# If nothing is specified, Calamares defaults to both "msdos" and "gpt".
+#
+# requiredPartitionTableType: gpt
+# requiredPartitionTableType:
+#     - msdos
+#     - gpt
+
+# Default filesystem type, used when a "new" partition is made.
+#
+# When replacing a partition, the existing filesystem inside the
+# partition is retained. In other cases, e.g. Erase and Alongside,
+# as well as when using manual partitioning and creating a new
+# partition, this filesystem type is pre-selected. Note that
+# editing a partition in manual-creation mode will not automatically
+# change the filesystem type to this default value -- it is not
+# creating a new partition.
+#
+# Suggested values: ext2, ext3, ext4, reiser, xfs, jfs, btrfs
+# If nothing is specified, Calamares defaults to "ext4".
+#
+# Names are case-sensitive and defined by KPMCore.
+defaultFileSystemType:  "ext4"
+
+# Selectable filesystem type, used when "erase" is done.
+#
+# When erasing the disk, the *defaultFileSystemType* is used (see
+# above), but it is also possible to give users a choice:
+# list suitable filesystems here. A drop-down is provided
+# to pick which is the filesystems will be used.
+#
+# The value *defaultFileSystemType* is added to this list (with a warning)
+# if not present; the default pick is the *defaultFileSystemType*.
+#
+# If not specified at all, uses *defaultFileSystemType* without a
+# warning (this matches traditional no-choice-available behavior best).
+availableFileSystemTypes:  ["ext4"]
+
+# Show/hide LUKS related functionality in automated partitioning modes.
+# Disable this if you choose not to deploy early unlocking support in GRUB2
+# and/or your distribution's initramfs solution.
+#
+# BIG FAT WARNING:
+#
+# This option is unsupported, as it cuts out a crucial security feature.
+# Disabling LUKS and shipping Calamares without a correctly configured GRUB2
+# and initramfs is considered suboptimal use of the Calamares software. The
+# Calamares team will not provide user support for any potential issue that
+# may arise as a consequence of setting this option to false.
+# It is strongly recommended that system integrators put in the work to support
+# LUKS unlocking support in GRUB2 and initramfs/dracut/mkinitcpio/etc.
+# For more information on setting up GRUB2 for Calamares with LUKS, see
+# https://github.com/calamares/calamares/wiki/Deploy-LUKS
+#
+# If nothing is specified, LUKS is enabled in automated modes.
+#enableLuksAutomatedPartitioning:    true
+
+# Partition layout.
+#
+# This optional setting specifies a custom partition layout.
+#
+# If nothing is specified, the default partition layout is a single partition
+# for root that uses 100% of the space and uses the filesystem defined by
+# defaultFileSystemType.
+#
+# Note: the EFI system partition is prepend automatically to the layout if
+# needed; the swap partition is appended to the layout if enabled (small of
+# suspend).
+#
+# Otherwise, the partition layout is defined as follow:
+#
+# partitionLayout:
+#     - name: "rootfs"
+#       type: "4f68bce3-e8cd-4db1-96e7-fbcaf984b709"
+#       filesystem: "ext4"
+#       mountPoint: "/"
+#       size: 20%
+#       minSize: 500M
+#       maxSize: 10G
+#       attributes: 0xffff000000000003
+#     - name: "home"
+#       type = "933ac7e1-2eb4-4f13-b844-0e14e2aef915"
+#       filesystem: "ext4"
+#       mountPoint: "/home"
+#       size: 3G
+#       minSize: 1.5G
+#       features:
+#         64bit: false
+#         casefold: true
+#     - name: "data"
+#       filesystem: "fat32"
+#       mountPoint: "/data"
+#       features:
+#         sector-size: 4096
+#         sectors-per-cluster: 128
+#       size: 100%
+#
+# There can be any number of partitions, each entry having the following attributes:
+#   - name: filesystem label
+#           and
+#           partition name (gpt only; since KPMCore 4.2.0)
+#   - uuid: partition uuid (optional parameter; gpt only; requires KPMCore >= 4.2.0)
+#   - type: partition type (optional parameter; gpt only; requires KPMCore >= 4.2.0)
+#   - attributes: partition attributes (optional parameter; gpt only; requires KPMCore >= 4.2.0)
+#   - filesystem: filesystem type (optional parameter)
+#       - if not set at all, treat as "unformatted"
+#       - if "unformatted", no filesystem will be created
+#       - if "unknown" (or an unknown FS name, like "elephant") then the
+#         default filesystem type, or the user's choice, will be applied instead
+#         of "unknown" (e.g. the user might pick ext4, or xfs).
+#   - mountPoint: partition mount point (optional parameter; not mounted if unset)
+#   - size: partition size in bytes (append 'K', 'M' or 'G' for KiB, MiB or GiB)
+#           or
+#           % of the available drive space if a '%' is appended to the value
+#   - minSize: minimum partition size (optional parameter)
+#   - maxSize: maximum partition size (optional parameter)
+#   - features: filesystem features (optional parameter; requires KPMCore >= 4.2.0)
+#       name: boolean or integer or string
+
+# Checking for available storage
+#
+# This overlaps with the setting of the same name in the welcome module's
+# requirements section. If nothing is set by the welcome module, this
+# value is used instead. It is still a problem if there is no required
+# size set at all, and the replace and resize options will not be offered
+# if no required size is set.
+#
+# The value is in Gibibytes (GiB).
+#
+# BIG FAT WARNING: except for OEM-phase-0 use, you should be using
+#                  the welcome module, **and** configure this value in
+#                  `welcome.conf`, not here.
+requiredStorage: 6.0

package/conf/distros/fedora/calamares/modules/removeuser.yml

@@ -0,0 +1,15 @@
+# # Alpine 3.18
+# removeuser
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Removes a single user (with userdel) from the system.
+# This is typically used in OEM setups or if the live user
+# spills into the target system.
+#
+# The module never fails; if userdel fails, this is logged
+# but the module still reports success and installation / setup
+# continues as normal.
+---
+# Username in the target system to be removed.
+username: {{username}}

package/conf/distros/fedora/calamares/modules/unpackfs.yml

@@ -0,0 +1,6 @@
+# # Alpine 3.18
+---
+unpack:
+    -   source: {{source}}
+        sourcefs: "squashfs"
+        destination: ""

package/conf/distros/fedora/calamares/modules/users.yml

@@ -0,0 +1,18 @@
+---
+userGroup: users
+defaultGroups:
+  - cdrom
+  - floppy
+  - sudo
+  - audio
+  - dip
+  - video
+  - plugdev
+  - netdev
+  - lpadmin
+  - scanner
+  - bluetooth
+autologinGroup: autologin
+sudoersGroup: sudo
+setRootPassword: true
+doReusePassword: false

package/conf/distros/fedora/calamares/modules/welcome.yml

@@ -0,0 +1,19 @@
+# Alpine 3.18
+# welcome
+---
+showSupportUrl: true
+showKnownIssuesUrl: true
+showReleaseNotesUrl: true
+
+requirements:
+  requiredStorage: 10
+  requiredRam: 1.0
+  check:
+    - storage
+    - ram
+    - power
+    - root
+  required:
+    - storage
+    - ram
+    - root

package/conf/distros/fedora/calamares/settings.yml

@@ -0,0 +1,57 @@
+# Alpine 3.18
+---
+# "local" is LIBDIR/calamares/modules with settings in SHARE/calamares/modules
+modules-search: [ local, /usr/lib/calamares/modules ]
+
+oem-setup: false
+disable-cancel: false
+disable-cancel-during-exec: false
+quit-at-end: false
+
+instances:
+- id:       cleanup
+  module:   shellprocess
+  config:   shellprocess_cleanup.conf
+
+sequence:
+  # Phase 1 - prepare.
+  - show:
+      - welcome
+      - locale
+      - keyboard
+      - partition
+      - users
+      - summary
+
+  # Phase 2 - install.
+  - exec:
+      - partition
+      - mount
+      - unpackfs
+      - machineid
+      - fstab
+      - locale
+      - keyboard
+      - users
+      - displaymanager 
+      - networkcfg
+      - hwclock
+      - services-openrc
+      - bootloader-config
+      - grubcfg
+      - bootloader
+      - packages
+      - luksbootkeyfile
+      - plymouthcfg
+      - mkinitfs
+      - removeuser
+      - umount
+
+  # Phase 3 - postinstall.
+  - show:
+      - finished
+
+# branding
+branding: {{branding}}
+prompt-install: false
+dont-chroot: false

package/dist/classes/distro.js

@@ -105,61 +105,34 @@ class Distro {
          * Analize distroId
          */
         switch (this.distroId) {
+            /**
+             * Alpine compatible
+             */
             case 'Alpine': {
                 this.familyId = 'alpine';
-                this.distroLike = 'Alpine';
-                this.codenameId = 'rolling'; // questo viene rimosso dal nome
-                this.codenameLikeId = 'alpine'; // prende alpine come codenaneLikeId
-                this.liveMediumPath = '/mnt/'; // Qua è deciso da noi
-                this.squashfs = `live/filesystem.squashfs`;
-                this.syslinuxPath = '/usr/share/syslinux/'; // correct
-                this.pxelinuxPath = this.syslinuxPath;
-                this.usrLibPath = '/usr/lib/';
-                this.memdiskPath = this.syslinuxPath;
-                this.isolinuxPath = this.syslinuxPath;
-                // At the moment
-                this.isCalamaresAvailable = true;
                 break;
             }
+            /**
+             * Fedora compatible
+             */
+            case 'NobaraLinux':
             case 'Fedora': {
                 this.familyId = 'fedora';
-                this.distroLike = 'Fedora';
-                this.codenameId = 'rolling';
-                this.codenameLikeId = '40';
-                this.liveMediumPath = '/run/install/repo/'; // ? è il mount della root su cd di installatione
-                this.squashfs = `live/filesystem.squashfs`;
-                this.syslinuxPath = '/usr/share/syslinux/';
-                this.pxelinuxPath = this.syslinuxPath;
-                this.usrLibPath = '/usr/lib/';
-                this.memdiskPath = this.syslinuxPath;
-                this.isolinuxPath = this.syslinuxPath;
-                // At the moment
-                this.isCalamaresAvailable = false;
                 break;
             }
+            /**
+             * opensuse compatible
+             */
             case 'openSUSE': {
                 this.familyId = 'suse';
-                this.distroLike = 'openSUSE';
-                this.codenameId = 'rolling';
-                this.codenameLikeId = 'Tumbleweed';
-                this.liveMediumPath = '/run/install/repo/'; // ? è il mount della root su cd di installatione
-                this.squashfs = `live/filesystem.squashfs`;
-                this.syslinuxPath = '/usr/share/syslinux/';
-                this.pxelinuxPath = this.syslinuxPath;
-                this.usrLibPath = '/usr/lib/';
-                this.memdiskPath = this.syslinuxPath;
-                this.isolinuxPath = this.syslinuxPath;
-                // At the moment
-                this.isCalamaresAvailable = false;
                 break;
             }
+            /**
+             * Arch/Debian/Devuan/Manjaro and Ubuntu
+             */
             default: {
-                /**
-                 * Arch/Debian/Devuan/Manjaro and Ubuntu
-                 */
                 switch (this.codenameId) {
                     case 'jessie': {
-                        // Debian 8 jessie
                         this.distroLike = 'Debian';
                         this.codenameLikeId = 'jessie';
                         this.liveMediumPath = '/lib/live/mount/medium/';
@@ -167,7 +140,6 @@ class Distro {
                         break;
                     }
                     case 'stretch': {
-                        // Debian 9 stretch
                         this.distroLike = 'Debian';
                         this.codenameLikeId = 'stretch';
                         this.liveMediumPath = '/lib/live/mount/medium/';
@@ -175,43 +147,39 @@ class Distro {
                         break;
                     }
                     case 'buster': {
-                        // Debian 10 buster
                         this.distroLike = 'Debian';
                         this.codenameLikeId = 'buster';
                         break;
                     }
                     case 'bullseye': {
-                        // Debian 11 bullseye
                         this.distroLike = 'Debian';
                         this.codenameLikeId = 'bullseye';
                         break;
                     }
                     case 'bookworm': {
-                        // Debian 12 bookworm
                         this.distroLike = 'Debian';
                         this.codenameLikeId = 'bookworm';
                         break;
                     }
                     case 'trixie': {
-                        // Debian 13 trixie
                         this.distroLike = 'Debian';
                         this.codenameLikeId = 'trixie';
                         break;
                     }
+                    /**
+                     * Devuan
+                     */
                     case 'beowulf': {
-                        // Devuab 3 beowulf
                         this.distroLike = 'Devuan';
                         this.codenameLikeId = 'beowulf';
                         break;
                     }
                     case 'chimaera': {
-                        // Devuab 4 chimaera
                         this.distroLike = 'Devuan';
                         this.codenameLikeId = 'chimaera';
                         break;
                     }
                     case 'daedalus': {
-                        // Devuan 5 daedalus
                         this.distroLike = 'Devuan';
                         this.codenameLikeId = 'daedalus';
                         break;
@@ -220,38 +188,36 @@ class Distro {
                      * Ubuntu LTS + actual
                      */
                     case 'bionic': {
-                        // Ubuntu 18.04 bionic LTS eol aprile 2023
                         this.distroLike = 'Ubuntu';
                         this.codenameLikeId = 'bionic';
                         this.liveMediumPath = '/lib/live/mount/medium/';
                         break;
                     }
                     case 'focal': {
-                        // Ubuntu 20.04 focal LTS
                         this.distroLike = 'Ubuntu';
                         this.codenameLikeId = 'focal';
                         break;
                     }
                     case 'jammy': {
-                        // Ubuntu 22.04 jammy LTS
                         this.distroLike = 'Ubuntu';
                         this.codenameLikeId = 'jammy';
                         break;
                     }
                     case 'noble': {
-                        // Ubuntu 24.04 noble LTS
                         this.distroLike = 'Ubuntu';
                         this.codenameLikeId = 'noble';
                         break;
                     }
+                    /**
+                     * Rhino
+                     */
                     case 'devel': {
-                        // Ubuntu rhino
                         this.distroLike = 'Ubuntu';
                         this.codenameLikeId = 'devel';
                         break;
                     }
                     /**
-                     * Arch Linux/Garuda
+                     * Arch
                      */
                     case 'Spizaetus':
                     case 'n/a':
@@ -264,6 +230,9 @@ class Distro {
                         this.squashfs = `arch/x86_64/airootfs.sfs`;
                         break;
                     }
+                    /**
+                     * find in derivatives
+                     */
                     default: {
                         /**
                          * patch per Roy VERIFICARE
@@ -318,9 +287,55 @@ class Distro {
                         this.isolinuxPath = this.syslinuxPath;
                         break;
                     }
-                    // No default
                 } // Fine analisi codenameId
             }
+        } // Fine analisi distroId
+        /**
+         * familyId
+         */
+        switch (this.familyId) {
+            case 'alpine': {
+                this.distroLike = 'Alpine';
+                this.codenameId = 'rolling'; // questo viene rimosso dal nome
+                this.codenameLikeId = 'alpine'; // prende alpine come codenaneLikeId
+                this.liveMediumPath = '/mnt/'; // Qua è deciso da noi
+                this.syslinuxPath = '/usr/share/syslinux/'; // correct
+                this.pxelinuxPath = this.syslinuxPath;
+                this.usrLibPath = '/usr/lib/';
+                this.memdiskPath = this.syslinuxPath;
+                this.isolinuxPath = this.syslinuxPath;
+                // At the moment
+                this.isCalamaresAvailable = true;
+                break;
+            }
+            case 'fedora': {
+                this.distroLike = 'Fedora';
+                this.codenameId = 'rolling'; // questo viene rimosso dal nome
+                this.codenameLikeId = 'fedora';
+                this.liveMediumPath = '/run/initramfs/live/';
+                this.syslinuxPath = '/usr/share/syslinux/';
+                this.pxelinuxPath = this.syslinuxPath;
+                this.usrLibPath = '/usr/lib/';
+                this.memdiskPath = this.syslinuxPath;
+                this.isolinuxPath = this.syslinuxPath;
+                // At the moment
+                this.isCalamaresAvailable = true;
+                break;
+            }
+            case 'suse': {
+                this.distroLike = 'openSUSE';
+                this.codenameId = 'rolling';
+                this.codenameLikeId = 'Tumbleweed';
+                this.liveMediumPath = '/run/install/repo/'; // ? è il mount della root su cd di installatione
+                this.syslinuxPath = '/usr/share/syslinux/';
+                this.pxelinuxPath = this.syslinuxPath;
+                this.usrLibPath = '/usr/lib/';
+                this.memdiskPath = this.syslinuxPath;
+                this.isolinuxPath = this.syslinuxPath;
+                // At the moment
+                this.isCalamaresAvailable = false;
+                break;
+            }
         }
         /**
          * if lsb-release exists

package/dist/classes/families/alpine.d.ts

@@ -15,10 +15,6 @@ export default class Alpine {
      * Alpine: calamaresInstall
      */
     static calamaresInstall(verbose?: boolean): Promise<void>;
-    /**
-     * Alpine: calamaresPolicies
-     */
-    static calamaresPolicies(verbose?: boolean): Promise<void>;
     /**
      * Alpine: calamaresRemove
      */

package/dist/classes/families/alpine.js

@@ -74,14 +74,6 @@ export default class Alpine {
             Utils.error(`Alpine.calamaresInstall(): apk add calamares ...`);
         }
     }
-    /**
-     * Alpine: calamaresPolicies
-     */
-    static async calamaresPolicies(verbose = true) {
-        const echo = Utils.setEcho(verbose);
-        const policyFile = '/usr/share/polkit-1/actions/com.github.calamares.calamares.policy';
-        await exec(`sed -i 's/auth_admin/yes/' ${policyFile}`, echo);
-    }
     /**
      * Alpine: calamaresRemove
      */

package/dist/classes/families/archlinux.d.ts

@@ -15,10 +15,6 @@ export default class Archlinux {
      * Archlinux: calamaresInstall
      */
     static calamaresInstall(verbose?: boolean): Promise<void>;
-    /**
-     * Archlinux: calamaresPolicies
-     */
-    static calamaresPolicies(): Promise<void>;
     /**
      * Archlinux: calamaresRemove
      */

package/dist/classes/families/archlinux.js

@@ -42,13 +42,6 @@ export default class Archlinux {
             Utils.error(`Cannot download ${cal_eggs}`); // + e.error)
         }
     }
-    /**
-     * Archlinux: calamaresPolicies
-     */
-    static async calamaresPolicies() {
-        const policyFile = '/usr/share/polkit-1/actions/com.github.calamares.calamares.policy';
-        await exec(`sed -i 's/auth_admin/yes/' ${policyFile}`);
-    }
     /**
      * Archlinux: calamaresRemove
      */

package/dist/classes/families/debian.d.ts

@@ -15,10 +15,6 @@ export default class Debian {
      * Debian: calamaresInstall
      */
     static calamaresInstall(verbose?: boolean): Promise<void>;
-    /**
-     * Debian: calamaresPolicies
-     */
-    static calamaresPolicies(): Promise<void>;
     /**
      * Debian: calamaresRemove
      */