pdf-creator-node 2.3.4 → 2.4.0

package/example/node_modules/pdf-creator-node/example/node_modules/extsprintf/Makefile.targ

@@ -1,285 +0,0 @@
-# -*- mode: makefile -*-
-#
-# Copyright (c) 2012, Joyent, Inc. All rights reserved.
-#
-# Makefile.targ: common targets.
-#
-# NOTE: This makefile comes from the "eng" repo. It's designed to be dropped
-# into other repos as-is without requiring any modifications. If you find
-# yourself changing this file, you should instead update the original copy in
-# eng.git and then update your repo to use the new version.
-#
-# This Makefile defines several useful targets and rules. You can use it by
-# including it from a Makefile that specifies some of the variables below.
-#
-# Targets defined in this Makefile:
-#
-#	check	Checks JavaScript files for lint and style
-#		Checks bash scripts for syntax
-#		Checks SMF manifests for validity against the SMF DTD
-#
-#	clean	Removes built files
-#
-#	docs	Builds restdown documentation in docs/
-#
-#	prepush	Depends on "check" and "test"
-#
-#	test	Does nothing (you should override this)
-#
-#	xref	Generates cscope (source cross-reference index)
-#
-# For details on what these targets are supposed to do, see the Joyent
-# Engineering Guide.
-#
-# To make use of these targets, you'll need to set some of these variables. Any
-# variables left unset will simply not be used.
-#
-#	BASH_FILES	Bash scripts to check for syntax
-#			(paths relative to top-level Makefile)
-#
-#	CLEAN_FILES	Files to remove as part of the "clean" target.  Note
-#			that files generated by targets in this Makefile are
-#			automatically included in CLEAN_FILES.  These include
-#			restdown-generated HTML and JSON files.
-#
-#	DOC_FILES	Restdown (documentation source) files. These are
-#			assumed to be contained in "docs/", and must NOT
-#			contain the "docs/" prefix.
-#
-#	JSL_CONF_NODE	Specify JavaScriptLint configuration files
-#	JSL_CONF_WEB	(paths relative to top-level Makefile)
-#
-#			Node.js and Web configuration files are separate
-#			because you'll usually want different global variable
-#			configurations.  If no file is specified, none is given
-#			to jsl, which causes it to use a default configuration,
-#			which probably isn't what you want.
-#
-#	JSL_FILES_NODE	JavaScript files to check with Node config file.
-#	JSL_FILES_WEB	JavaScript files to check with Web config file.
-#
-# You can also override these variables:
-#
-#	BASH		Path to bash (default: bash)
-#
-#	CSCOPE_DIRS	Directories to search for source files for the cscope
-#			index. (default: ".")
-#
-#	JSL		Path to JavaScriptLint (default: "jsl")
-#
-#	JSL_FLAGS_NODE	Additional flags to pass through to JSL
-#	JSL_FLAGS_WEB
-#	JSL_FLAGS
-#
-#	JSSTYLE		Path to jsstyle (default: jsstyle)
-#
-#	JSSTYLE_FLAGS	Additional flags to pass through to jsstyle
-#
-
-#
-# Defaults for the various tools we use.
-#
-BASH		?= bash
-BASHSTYLE	?= tools/bashstyle
-CP		?= cp
-CSCOPE		?= cscope
-CSCOPE_DIRS	?= .
-JSL		?= jsl
-JSSTYLE		?= jsstyle
-MKDIR		?= mkdir -p
-MV		?= mv
-RESTDOWN_FLAGS	?=
-RMTREE		?= rm -rf
-JSL_FLAGS  	?= --nologo --nosummary
-
-ifeq ($(shell uname -s),SunOS)
-	TAR	?= gtar
-else
-	TAR	?= tar
-endif
-
-
-#
-# Defaults for other fixed values.
-#
-BUILD		= build
-DISTCLEAN_FILES += $(BUILD)
-DOC_BUILD	= $(BUILD)/docs/public
-
-#
-# Configure JSL_FLAGS_{NODE,WEB} based on JSL_CONF_{NODE,WEB}.
-#
-ifneq ($(origin JSL_CONF_NODE), undefined)
-	JSL_FLAGS_NODE += --conf=$(JSL_CONF_NODE)
-endif
-
-ifneq ($(origin JSL_CONF_WEB), undefined)
-	JSL_FLAGS_WEB += --conf=$(JSL_CONF_WEB)
-endif
-
-#
-# Targets. For descriptions on what these are supposed to do, see the
-# Joyent Engineering Guide.
-#
-
-#
-# Instruct make to keep around temporary files. We have rules below that
-# automatically update git submodules as needed, but they employ a deps/*/.git
-# temporary file. Without this directive, make tries to remove these .git
-# directories after the build has completed.
-#
-.SECONDARY: $($(wildcard deps/*):%=%/.git)
-
-#
-# This rule enables other rules that use files from a git submodule to have
-# those files depend on deps/module/.git and have "make" automatically check
-# out the submodule as needed.
-#
-deps/%/.git:
-	git submodule update --init deps/$*
-
-#
-# These recipes make heavy use of dynamically-created phony targets. The parent
-# Makefile defines a list of input files like BASH_FILES. We then say that each
-# of these files depends on a fake target called filename.bashchk, and then we
-# define a pattern rule for those targets that runs bash in check-syntax-only
-# mode. This mechanism has the nice properties that if you specify zero files,
-# the rule becomes a noop (unlike a single rule to check all bash files, which
-# would invoke bash with zero files), and you can check individual files from
-# the command line with "make filename.bashchk".
-#
-.PHONY: check-bash
-check-bash: $(BASH_FILES:%=%.bashchk) $(BASH_FILES:%=%.bashstyle)
-
-%.bashchk: %
-	$(BASH) -n $^
-
-%.bashstyle: %
-	$(BASHSTYLE) $^
-
-.PHONY: check-jsl check-jsl-node check-jsl-web
-check-jsl: check-jsl-node check-jsl-web
-
-check-jsl-node: $(JSL_FILES_NODE:%=%.jslnodechk)
-
-check-jsl-web: $(JSL_FILES_WEB:%=%.jslwebchk)
-
-%.jslnodechk: % $(JSL_EXEC)
-	$(JSL) $(JSL_FLAGS) $(JSL_FLAGS_NODE) $<
-
-%.jslwebchk: % $(JSL_EXEC)
-	$(JSL) $(JSL_FLAGS) $(JSL_FLAGS_WEB) $<
-
-.PHONY: check-jsstyle
-check-jsstyle: $(JSSTYLE_FILES:%=%.jsstylechk)
-
-%.jsstylechk: % $(JSSTYLE_EXEC)
-	$(JSSTYLE) $(JSSTYLE_FLAGS) $<
-
-.PHONY: check
-check: check-jsl check-jsstyle check-bash
-	@echo check ok
-
-.PHONY: clean
-clean::
-	-$(RMTREE) $(CLEAN_FILES)
-
-.PHONY: distclean
-distclean:: clean
-	-$(RMTREE) $(DISTCLEAN_FILES)
-
-CSCOPE_FILES = cscope.in.out cscope.out cscope.po.out
-CLEAN_FILES += $(CSCOPE_FILES)
-
-.PHONY: xref
-xref: cscope.files
-	$(CSCOPE) -bqR
-
-.PHONY: cscope.files
-cscope.files:
-	find $(CSCOPE_DIRS) -name '*.c' -o -name '*.h' -o -name '*.cc' \
-	    -o -name '*.js' -o -name '*.s' -o -name '*.cpp' > $@
-
-#
-# The "docs" target is complicated because we do several things here:
-#
-#    (1) Use restdown to build HTML and JSON files from each of DOC_FILES.
-#
-#    (2) Copy these files into $(DOC_BUILD) (build/docs/public), which
-#        functions as a complete copy of the documentation that could be
-#        mirrored or served over HTTP.
-#
-#    (3) Then copy any directories and media from docs/media into
-#        $(DOC_BUILD)/media. This allows projects to include their own media,
-#        including files that will override same-named files provided by
-#        restdown.
-#
-# Step (3) is the surprisingly complex part: in order to do this, we need to
-# identify the subdirectories in docs/media, recreate them in
-# $(DOC_BUILD)/media, then do the same with the files.
-#
-DOC_MEDIA_DIRS := $(shell find docs/media -type d 2>/dev/null | grep -v "^docs/media$$")
-DOC_MEDIA_DIRS := $(DOC_MEDIA_DIRS:docs/media/%=%)
-DOC_MEDIA_DIRS_BUILD := $(DOC_MEDIA_DIRS:%=$(DOC_BUILD)/media/%)
-
-DOC_MEDIA_FILES := $(shell find docs/media -type f 2>/dev/null)
-DOC_MEDIA_FILES := $(DOC_MEDIA_FILES:docs/media/%=%)
-DOC_MEDIA_FILES_BUILD := $(DOC_MEDIA_FILES:%=$(DOC_BUILD)/media/%)
-
-#
-# Like the other targets, "docs" just depends on the final files we want to
-# create in $(DOC_BUILD), leveraging other targets and recipes to define how
-# to get there.
-#
-.PHONY: docs
-docs:							\
-    $(DOC_FILES:%.restdown=$(DOC_BUILD)/%.html)		\
-    $(DOC_FILES:%.restdown=$(DOC_BUILD)/%.json)		\
-    $(DOC_MEDIA_FILES_BUILD)
-
-#
-# We keep the intermediate files so that the next build can see whether the
-# files in DOC_BUILD are up to date.
-#
-.PRECIOUS:					\
-    $(DOC_FILES:%.restdown=docs/%.html)		\
-    $(DOC_FILES:%.restdown=docs/%json)
-
-#
-# We do clean those intermediate files, as well as all of DOC_BUILD.
-#
-CLEAN_FILES +=					\
-    $(DOC_BUILD)				\
-    $(DOC_FILES:%.restdown=docs/%.html)		\
-    $(DOC_FILES:%.restdown=docs/%.json)
-
-#
-# Before installing the files, we must make sure the directories exist. The |
-# syntax tells make that the dependency need only exist, not be up to date.
-# Otherwise, it might try to rebuild spuriously because the directory itself
-# appears out of date.
-#
-$(DOC_MEDIA_FILES_BUILD): | $(DOC_MEDIA_DIRS_BUILD)
-
-$(DOC_BUILD)/%: docs/% | $(DOC_BUILD)
-	$(CP) $< $@
-
-docs/%.json docs/%.html: docs/%.restdown | $(DOC_BUILD) $(RESTDOWN_EXEC)
-	$(RESTDOWN) $(RESTDOWN_FLAGS) -m $(DOC_BUILD) $<
-
-$(DOC_BUILD):
-	$(MKDIR) $@
-
-$(DOC_MEDIA_DIRS_BUILD):
-	$(MKDIR) $@
-
-#
-# The default "test" target does nothing. This should usually be overridden by
-# the parent Makefile. It's included here so we can define "prepush" without
-# requiring the repo to define "test".
-#
-.PHONY: test
-test:
-
-.PHONY: prepush
-prepush: check test

package/example/node_modules/pdf-creator-node/example/node_modules/extsprintf/README.md

@@ -1,46 +0,0 @@
-# extsprintf: extended POSIX-style sprintf
-
-Stripped down version of s[n]printf(3c).  We make a best effort to throw an
-exception when given a format string we don't understand, rather than ignoring
-it, so that we won't break existing programs if/when we go implement the rest
-of this.
-
-This implementation currently supports specifying
-
-* field alignment ('-' flag),
-* zero-pad ('0' flag)
-* always show numeric sign ('+' flag),
-* field width
-* conversions for strings, decimal integers, and floats (numbers).
-* argument size specifiers.  These are all accepted but ignored, since
-  Javascript has no notion of the physical size of an argument.
-
-Everything else is currently unsupported, most notably: precision, unsigned
-numbers, non-decimal numbers, and characters.
-
-Besides the usual POSIX conversions, this implementation supports:
-
-* `%j`: pretty-print a JSON object (using node's "inspect")
-* `%r`: pretty-print an Error object
-
-# Example
-
-First, install it:
-
-    # npm install extsprintf
-
-Now, use it:
-
-    var mod_extsprintf = require('extsprintf');
-    console.log(mod_extsprintf.sprintf('hello %25s', 'world'));
-
-outputs:
-
-    hello                     world
-
-# Also supported
-
-**printf**: same args as sprintf, but prints the result to stdout
-
-**fprintf**: same args as sprintf, preceded by a Node stream.  Prints the result
-to the given stream.

package/example/node_modules/pdf-creator-node/example/node_modules/extsprintf/jsl.node.conf

@@ -1,137 +0,0 @@
-#
-# Configuration File for JavaScript Lint 
-#
-# This configuration file can be used to lint a collection of scripts, or to enable
-# or disable warnings for scripts that are linted via the command line.
-#
-
-### Warnings
-# Enable or disable warnings based on requirements.
-# Use "+WarningName" to display or "-WarningName" to suppress.
-#
-+ambiguous_else_stmt          # the else statement could be matched with one of multiple if statements (use curly braces to indicate intent
-+ambiguous_nested_stmt        # block statements containing block statements should use curly braces to resolve ambiguity
-+ambiguous_newline            # unexpected end of line; it is ambiguous whether these lines are part of the same statement
-+anon_no_return_value         # anonymous function does not always return value
-+assign_to_function_call      # assignment to a function call
--block_without_braces         # block statement without curly braces
-+comma_separated_stmts        # multiple statements separated by commas (use semicolons?)
-+comparison_type_conv         # comparisons against null, 0, true, false, or an empty string allowing implicit type conversion (use === or !==)
-+default_not_at_end           # the default case is not at the end of the switch statement
-+dup_option_explicit          # duplicate "option explicit" control comment
-+duplicate_case_in_switch     # duplicate case in switch statement
-+duplicate_formal             # duplicate formal argument {name}
-+empty_statement              # empty statement or extra semicolon
-+identifier_hides_another     # identifer {name} hides an identifier in a parent scope
--inc_dec_within_stmt          # increment (++) and decrement (--) operators used as part of greater statement
-+incorrect_version            # Expected /*jsl:content-type*/ control comment. The script was parsed with the wrong version.
-+invalid_fallthru             # unexpected "fallthru" control comment
-+invalid_pass                 # unexpected "pass" control comment
-+jsl_cc_not_understood        # couldn't understand control comment using /*jsl:keyword*/ syntax
-+leading_decimal_point        # leading decimal point may indicate a number or an object member
-+legacy_cc_not_understood     # couldn't understand control comment using /*@keyword@*/ syntax
-+meaningless_block            # meaningless block; curly braces have no impact
-+mismatch_ctrl_comments       # mismatched control comment; "ignore" and "end" control comments must have a one-to-one correspondence
-+misplaced_regex              # regular expressions should be preceded by a left parenthesis, assignment, colon, or comma
-+missing_break                # missing break statement
-+missing_break_for_last_case  # missing break statement for last case in switch
-+missing_default_case         # missing default case in switch statement
-+missing_option_explicit      # the "option explicit" control comment is missing
-+missing_semicolon            # missing semicolon
-+missing_semicolon_for_lambda # missing semicolon for lambda assignment
-+multiple_plus_minus          # unknown order of operations for successive plus (e.g. x+++y) or minus (e.g. x---y) signs
-+nested_comment               # nested comment
-+no_return_value              # function {name} does not always return a value
-+octal_number                 # leading zeros make an octal number
-+parseint_missing_radix       # parseInt missing radix parameter
-+partial_option_explicit      # the "option explicit" control comment, if used, must be in the first script tag
-+redeclared_var               # redeclaration of {name}
-+trailing_comma_in_array      # extra comma is not recommended in array initializers
-+trailing_decimal_point       # trailing decimal point may indicate a number or an object member
-+undeclared_identifier        # undeclared identifier: {name}
-+unreachable_code             # unreachable code
--unreferenced_argument        # argument declared but never referenced: {name}
--unreferenced_function        # function is declared but never referenced: {name}
-+unreferenced_variable        # variable is declared but never referenced: {name}
-+unsupported_version          # JavaScript {version} is not supported
-+use_of_label                 # use of label
-+useless_assign               # useless assignment
-+useless_comparison           # useless comparison; comparing identical expressions
--useless_quotes               # the quotation marks are unnecessary
-+useless_void                 # use of the void type may be unnecessary (void is always undefined)
-+var_hides_arg                # variable {name} hides argument
-+want_assign_or_call          # expected an assignment or function call
-+with_statement               # with statement hides undeclared variables; use temporary variable instead
-
-
-### Output format
-# Customize the format of the error message.
-#    __FILE__ indicates current file path
-#    __FILENAME__ indicates current file name
-#    __LINE__ indicates current line
-#    __COL__ indicates current column
-#    __ERROR__ indicates error message (__ERROR_PREFIX__: __ERROR_MSG__)
-#    __ERROR_NAME__ indicates error name (used in configuration file)
-#    __ERROR_PREFIX__ indicates error prefix
-#    __ERROR_MSG__ indicates error message
-#
-# For machine-friendly output, the output format can be prefixed with
-# "encode:". If specified, all items will be encoded with C-slashes.
-#
-# Visual Studio syntax (default):
-+output-format __FILE__(__LINE__): __ERROR__
-# Alternative syntax:
-#+output-format __FILE__:__LINE__: __ERROR__
-
-
-### Context
-# Show the in-line position of the error.
-# Use "+context" to display or "-context" to suppress.
-#
-+context
-
-
-### Control Comments
-# Both JavaScript Lint and the JScript interpreter confuse each other with the syntax for
-# the /*@keyword@*/ control comments and JScript conditional comments. (The latter is
-# enabled in JScript with @cc_on@). The /*jsl:keyword*/ syntax is preferred for this reason,
-# although legacy control comments are enabled by default for backward compatibility.
-#
--legacy_control_comments
-
-
-### Defining identifiers
-# By default, "option explicit" is enabled on a per-file basis.
-# To enable this for all files, use "+always_use_option_explicit"
--always_use_option_explicit
-
-# Define certain identifiers of which the lint is not aware.
-# (Use this in conjunction with the "undeclared identifier" warning.)
-#
-# Common uses for webpages might be:
-+define __dirname
-+define clearInterval
-+define clearTimeout
-+define console
-+define exports
-+define global
-+define process
-+define require
-+define setInterval
-+define setTimeout
-+define Buffer
-+define JSON
-+define Math
-
-### JavaScript Version
-# To change the default JavaScript version:
-#+default-type text/javascript;version=1.5
-#+default-type text/javascript;e4x=1
-
-### Files
-# Specify which files to lint
-# Use "+recurse" to enable recursion (disabled by default).
-# To add a set of files, use "+process FileName", "+process Folder\Path\*.js",
-# or "+process Folder\Path\*.htm".
-#
-

package/example/node_modules/pdf-creator-node/example/node_modules/extsprintf/lib/extsprintf.js

@@ -1,183 +0,0 @@
-/*
- * extsprintf.js: extended POSIX-style sprintf
- */
-
-var mod_assert = require('assert');
-var mod_util = require('util');
-
-/*
- * Public interface
- */
-exports.sprintf = jsSprintf;
-exports.printf = jsPrintf;
-exports.fprintf = jsFprintf;
-
-/*
- * Stripped down version of s[n]printf(3c).  We make a best effort to throw an
- * exception when given a format string we don't understand, rather than
- * ignoring it, so that we won't break existing programs if/when we go implement
- * the rest of this.
- *
- * This implementation currently supports specifying
- *	- field alignment ('-' flag),
- * 	- zero-pad ('0' flag)
- *	- always show numeric sign ('+' flag),
- *	- field width
- *	- conversions for strings, decimal integers, and floats (numbers).
- *	- argument size specifiers.  These are all accepted but ignored, since
- *	  Javascript has no notion of the physical size of an argument.
- *
- * Everything else is currently unsupported, most notably precision, unsigned
- * numbers, non-decimal numbers, and characters.
- */
-function jsSprintf(fmt)
-{
-	var regex = [
-	    '([^%]*)',				/* normal text */
-	    '%',				/* start of format */
-	    '([\'\\-+ #0]*?)',			/* flags (optional) */
-	    '([1-9]\\d*)?',			/* width (optional) */
-	    '(\\.([1-9]\\d*))?',		/* precision (optional) */
-	    '[lhjztL]*?',			/* length mods (ignored) */
-	    '([diouxXfFeEgGaAcCsSp%jr])'	/* conversion */
-	].join('');
-
-	var re = new RegExp(regex);
-	var args = Array.prototype.slice.call(arguments, 1);
-	var flags, width, precision, conversion;
-	var left, pad, sign, arg, match;
-	var ret = '';
-	var argn = 1;
-
-	mod_assert.equal('string', typeof (fmt));
-
-	while ((match = re.exec(fmt)) !== null) {
-		ret += match[1];
-		fmt = fmt.substring(match[0].length);
-
-		flags = match[2] || '';
-		width = match[3] || 0;
-		precision = match[4] || '';
-		conversion = match[6];
-		left = false;
-		sign = false;
-		pad = ' ';
-
-		if (conversion == '%') {
-			ret += '%';
-			continue;
-		}
-
-		if (args.length === 0)
-			throw (new Error('too few args to sprintf'));
-
-		arg = args.shift();
-		argn++;
-
-		if (flags.match(/[\' #]/))
-			throw (new Error(
-			    'unsupported flags: ' + flags));
-
-		if (precision.length > 0)
-			throw (new Error(
-			    'non-zero precision not supported'));
-
-		if (flags.match(/-/))
-			left = true;
-
-		if (flags.match(/0/))
-			pad = '0';
-
-		if (flags.match(/\+/))
-			sign = true;
-
-		switch (conversion) {
-		case 's':
-			if (arg === undefined || arg === null)
-				throw (new Error('argument ' + argn +
-				    ': attempted to print undefined or null ' +
-				    'as a string'));
-			ret += doPad(pad, width, left, arg.toString());
-			break;
-
-		case 'd':
-			arg = Math.floor(arg);
-			/*jsl:fallthru*/
-		case 'f':
-			sign = sign && arg > 0 ? '+' : '';
-			ret += sign + doPad(pad, width, left,
-			    arg.toString());
-			break;
-
-		case 'x':
-			ret += doPad(pad, width, left, arg.toString(16));
-			break;
-
-		case 'j': /* non-standard */
-			if (width === 0)
-				width = 10;
-			ret += mod_util.inspect(arg, false, width);
-			break;
-
-		case 'r': /* non-standard */
-			ret += dumpException(arg);
-			break;
-
-		default:
-			throw (new Error('unsupported conversion: ' +
-			    conversion));
-		}
-	}
-
-	ret += fmt;
-	return (ret);
-}
-
-function jsPrintf() {
-	var args = Array.prototype.slice.call(arguments);
-	args.unshift(process.stdout);
-	jsFprintf.apply(null, args);
-}
-
-function jsFprintf(stream) {
-	var args = Array.prototype.slice.call(arguments, 1);
-	return (stream.write(jsSprintf.apply(this, args)));
-}
-
-function doPad(chr, width, left, str)
-{
-	var ret = str;
-
-	while (ret.length < width) {
-		if (left)
-			ret += chr;
-		else
-			ret = chr + ret;
-	}
-
-	return (ret);
-}
-
-/*
- * This function dumps long stack traces for exceptions having a cause() method.
- * See node-verror for an example.
- */
-function dumpException(ex)
-{
-	var ret;
-
-	if (!(ex instanceof Error))
-		throw (new Error(jsSprintf('invalid type for %%r: %j', ex)));
-
-	/* Note that V8 prepends "ex.stack" with ex.toString(). */
-	ret = 'EXCEPTION: ' + ex.constructor.name + ': ' + ex.stack;
-
-	if (ex.cause && typeof (ex.cause) === 'function') {
-		var cex = ex.cause();
-		if (cex) {
-			ret += '\nCaused by: ' + dumpException(cex);
-		}
-	}
-
-	return (ret);
-}

package/example/node_modules/pdf-creator-node/example/node_modules/extsprintf/package.json

@@ -1,44 +0,0 @@
-{
-  "_from": "extsprintf@1.3.0",
-  "_id": "extsprintf@1.3.0",
-  "_inBundle": false,
-  "_integrity": "sha1-lpGEQOMEGnpBT4xS48V06zw+HgU=",
-  "_location": "/extsprintf",
-  "_phantomChildren": {},
-  "_requested": {
-    "type": "version",
-    "registry": true,
-    "raw": "extsprintf@1.3.0",
-    "name": "extsprintf",
-    "escapedName": "extsprintf",
-    "rawSpec": "1.3.0",
-    "saveSpec": null,
-    "fetchSpec": "1.3.0"
-  },
-  "_requiredBy": [
-    "/jsprim",
-    "/verror"
-  ],
-  "_resolved": "https://registry.npmjs.org/extsprintf/-/extsprintf-1.3.0.tgz",
-  "_shasum": "96918440e3041a7a414f8c52e3c574eb3c3e1e05",
-  "_spec": "extsprintf@1.3.0",
-  "_where": "/Users/hajareshyam/Work/NodeJs/pdf-creator-node/example/node_modules/jsprim",
-  "bugs": {
-    "url": "https://github.com/davepacheco/node-extsprintf/issues"
-  },
-  "bundleDependencies": false,
-  "deprecated": false,
-  "description": "extended POSIX-style sprintf",
-  "engines": [
-    "node >=0.6.0"
-  ],
-  "homepage": "https://github.com/davepacheco/node-extsprintf#readme",
-  "license": "MIT",
-  "main": "./lib/extsprintf.js",
-  "name": "extsprintf",
-  "repository": {
-    "type": "git",
-    "url": "git://github.com/davepacheco/node-extsprintf.git"
-  },
-  "version": "1.3.0"
-}