ovtools 0.0.0-stage → 1.0.1

package/assets/manage/25-recover-node.sh

@@ -0,0 +1,291 @@
+#!/usr/bin/env bash
+# ===================================================================
+# 25-recover-node.sh - the solved path for a node stuck "ready / outside set"
+#
+# Every action is one the node's own tooling recommends; nothing is forced:
+#
+#   1. diagnose (the same evidence 10-diagnose-node.sh prints),
+#   2. clean restart when the node is frozen or /status times out
+#      (`pm2 save` + `pm2 restart`) - a fresh session re-handshakes peers and asks
+#      the state-sync source for a new range, which is what unblocks catch-up,
+#   3. `pm2 save` + `pm2 kill` + `pm2 resurrect` when the node's own tool refuses
+#      with "data directory is used outside PM2" (the pm2 entry and the running
+#      process disagree about the owner, so rejoin.sh cannot run at all),
+#   4. wait (bounded) for head_epoch to move and the lag to shrink. If the
+#      state-sync source keeps answering `503 state_sync_range_busy` the step
+#      reports WAITING-SYNC with the quoted reason - it never "fixes" it by hand,
+#   5. once in sync: `rejoin.sh --check`, then `--meet-stage` only when the tool
+#      itself says the round is behind (`round_lagging`/`not_ready_to_vote`),
+#   6. re-publish readiness (`enroll.sh join`, idempotent: the bond already exists)
+#      when enrollment is ready/bonded but the set has not picked it up,
+#   7. verdict: DONE active / DONE scheduled / WAITING-FOLD (with the epoch) /
+#      WAITING-SYNC / FAILED (the tool's own words).
+#
+# Nothing here signs a new bond, exits, or replaces the store: `recover.sh
+# --replace-state` is only ever *reported* as the next step when the tool asks.
+#
+# Usage:  sudo bash 25-recover-node.sh
+# Env:    SYNC_WAIT=<sec>       how long catch-up may take before WAITING-SYNC (900)
+#         SYNC_MIN=<epochs>     head must advance at least this much (3)
+#         SYNC_LAG_MAX=<epochs> lag that counts as "in sync" (5)
+#         FOLD_WAIT=<sec>       wait for scheduled/active after the rejoin (300)
+#         PROGRESS_SEC=<sec>    progress line interval (60)
+#         ALLOW_RESTART=0       report what would be done, restart nothing
+# ===================================================================
+
+set -euo pipefail
+source "$(dirname "$0")/lib.sh"
+
+require_root
+set_status RUNNING "recover-node"
+
+ensure_tool jq jq || die "jq is missing and could not be installed"
+ensure_tool curl curl || die "curl is missing and could not be installed"
+[[ -f "${NODE_ENV}" ]] || die "node.env is missing (${NODE_ENV}) - is this the validator host?"
+[[ -f "${NODE_WALLET}" ]] || die "wallet.json is missing (${NODE_WALLET})"
+
+SYNC_WAIT="${SYNC_WAIT:-900}"
+SYNC_MIN="${SYNC_MIN:-3}"
+LAG_MAX="${SYNC_LAG_MAX:-5}"
+FOLD_WAIT="${FOLD_WAIT:-300}"
+ALLOW_RESTART="${ALLOW_RESTART:-1}"
+POLL="${STATUS_POLL:-20}"
+
+WALLET=$(wallet_address || echo unknown)
+log "=== recover ${WALLET} on $(hostname) ==="
+
+# --- helpers ------------------------------------------------------------
+rpc_up() { [[ "$(head_epoch)" =~ ^[0-9]+$ ]]; }
+
+wait_rpc() {  # wait_rpc <seconds>
+  local limit="$1" start now
+  start=$(date +%s)
+  while :; do
+    rpc_up && return 0
+    now=$(date +%s)
+    (( now - start >= limit )) && return 1
+    sleep 5
+  done
+}
+
+pm2_as() { su - "${NODE_USER}" -c "pm2 $*" 2>&1 | sed 's/^/    /'; }
+
+busy_join() { pgrep -af "enroll.sh[ ]join" >/dev/null 2>&1; }
+
+# --- 0. never fight another enrollment ---------------------------------
+if busy_join; then
+  warn "a join is running right now - not touching the node"
+  set_status WAITING-BUSY "a join/enroll is already running; re-run when it finishes"
+  exit 2
+fi
+
+# --- 1. diagnose -------------------------------------------------------
+ENROLL=$(rpc_field octra_validatorEnrollment '[]' state)
+HEAD=$(head_epoch)
+CODE=$(status_code)
+log "before        : enrollment=${ENROLL:-?} head=${HEAD:-?} /status=HTTP ${CODE:-000} pm2=$(pm2_state)"
+
+REJOIN=$(node_script 180 "sh controls/rejoin.sh --check" || true)
+REJOIN_LINE=$(printf '%s\n' "${REJOIN}" | grep -aE '^status = ' | tail -1 || true)
+log "rejoin        : ${REJOIN_LINE:-<no status line>}"
+if printf '%s' "${REJOIN_LINE}" | grep -qi "recovery_required"; then
+  die "the local store failed its checkpoint check - run: sh controls/recover.sh --replace-state (nothing was changed here)"
+fi
+
+MISMATCH=0
+printf '%s' "${REJOIN_LINE}" | grep -qi "used outside PM2" && MISMATCH=1
+# The tool could not even produce a verdict (the RPC is down): re-creating the pm2
+# session is the safest single action then - it re-applies the env from the dump and
+# gives the node a fresh start, which is also what the "outside PM2" case needs.
+if [[ -z "${REJOIN_LINE}" ]] && ! rpc_up; then
+  MISMATCH=1
+  warn "rejoin.sh could not reach a verdict (the node does not answer its RPC) - re-creating the pm2 session"
+fi
+
+# already fine?
+if printf '%s' "${REJOIN_LINE}" | grep -q "validator_active"; then
+  log "this node is already the ACTIVE validator - nothing to recover"
+  set_status DONE "already active (nothing to do)"
+  echo "RECOVER state=active head=${HEAD:-none}"
+  exit 0
+
+# --- 2/3. the two things that actually need a restart -------------------
+RESTARTED=0
+if (( MISMATCH )); then
+  if (( ALLOW_RESTART )); then
+    warn "the data directory is 'used outside PM2' (or the RPC is gone): the pm2 session has to be re-created"
+    # `pm2 kill` is NOT used here: it kills the daemon that systemd supervises, so
+    # pm2-octra.service ends up 'failed' while the (hung) node keeps running - that
+    # is exactly what happened on .99 (2026-11-06). systemd does stop/start, and a
+    # node that ignores SIGTERM is reaped by exact process name.
+    log "re-creating the pm2 session through systemd (stop -> reap -> start); the node restarts from its own dump"
+    systemctl stop pm2-octra 2>/dev/null || true
+    systemctl reset-failed pm2-octra 2>/dev/null || true
+    sleep 3
+    for p in $(pgrep -x octra_node.exe 2>/dev/null || true); do
+      warn "the previous node (pid ${p}) survived the stop - sending SIGKILL"
+      kill -9 "${p}" 2>/dev/null || true
+    done
+    sleep 3
+    systemctl start pm2-octra 2>/dev/null || warn "systemctl start pm2-octra failed - check: systemctl status pm2-octra"
+    sleep 5
+    log "pm2-octra     : $(systemctl is-active pm2-octra 2>/dev/null || echo unknown)"
+    RESTARTED=1
+  else
+    warn "would re-create the pm2 session (ALLOW_RESTART=0) - the node's own tools cannot run until it is done"
+  fi
+elif [[ "${CODE}" != "200" || -z "${HEAD:-}" ]]; then
+  if (( ALLOW_RESTART )); then
+    warn "the node is not answering its own RPC properly (/status HTTP ${CODE:-000}) - one clean restart"
+    pm2_as save >/dev/null 2>&1 || true
+    pm2_as restart "$(pm2_name)" || true
+    RESTARTED=1
+  fi
+fi
+
+if (( RESTARTED )); then
+  # opening a 38 GB store takes minutes: 180 s was too optimistic on .99
+  if wait_rpc "${RPC_WAIT:-600}"; then
+    log "the node answers again: head=$(head_epoch) (pid $(pm2_state | awk '{print $3}'))"
+  else
+    warn "the RPC did not come back within ${RPC_WAIT:-600}s after the restart"
+    MEM_TOTAL=$(awk '/MemTotal/ {printf "%d", $2/1024}' /proc/meminfo 2>/dev/null || echo 0)
+    NODE_PID=$(pgrep -x octra_node.exe 2>/dev/null | head -1 || true)
+    NODE_RSS=""
+    [[ -n "${NODE_PID}" ]] && NODE_RSS=$(awk '/VmRSS/ {printf "%d", $2/1024}' "/proc/${NODE_PID}/status" 2>/dev/null || true)
+    warn "the process is up (pid ${NODE_PID:-none}, ${NODE_RSS:-?} MB RSS) on a ${MEM_TOTAL:-?} MB VM"
+    if (( ${MEM_TOTAL:-0} > 0 && MEM_TOTAL < 7600 )); then
+      warn "the store needs ~8 GB of RAM (16 comfortable): on this VM the node cannot finish opening it -"
+      warn "raise the RAM and start it again, or move the node with the Migrate node program"
+      set_status WAITING-STARTUP "the node cannot finish starting on a ${MEM_TOTAL} MB VM (needs ~8 GB) - raise the RAM or migrate"
+    else
+      warn "opening the store can take longer on a slow disk - re-run this step in a few minutes"
+      set_status WAITING-RPC "restarted, the local RPC is still silent - it may still be opening the store"
+    fi
+    echo "RECOVER state=restarted_no_rpc head=none"
+    exit 2
+  fi
+fi
+
+# --- 4. catch-up: the real gate ----------------------------------------
+START=$(date +%s)
+LAST=${START}
+FIRST=$(head_epoch)
+FIRST="${FIRST:-0}"
+BEST_LAG=""
+VERDICT=""
+while :; do
+  NOW_HEAD=$(head_epoch)
+  NET=$(network_epoch)
+  LAG=""
+  if [[ "${NOW_HEAD}" =~ ^[0-9]+$ && "${NET}" =~ ^[0-9]+$ ]]; then
+    LAG=$(( NET - NOW_HEAD ))
+    (( LAG < 0 )) && LAG=0
+    BEST_LAG="${LAG}"
+  fi
+  MOVED=$(( ${NOW_HEAD:-0} - FIRST ))
+  # in sync = head moved at least SYNC_MIN epochs and the lag is within LAG_MAX
+  if (( MOVED >= SYNC_MIN )) && [[ -n "${LAG}" ]] && (( LAG <= LAG_MAX )); then
+    VERDICT="synced"
+    break
+  fi
+  ELAPSED=$(( $(date +%s) - START ))
+  if (( ELAPSED >= SYNC_WAIT )); then
+    VERDICT="sync-timeout"
+    break
+  fi
+  if (( $(date +%s) - LAST >= PROGRESS_SEC )); then
+    REASON=$(catchup_reason)
+    log "  catch-up: head ${NOW_HEAD:-?} -> network ${NET:-?} (lag ${LAG:-?}, moved ${MOVED}/${SYNC_MIN})$([[ -n "${REASON}" ]] && echo " - ${REASON}")"
+    LAST=$(date +%s)
+  fi
+  sleep "${POLL}"
+done
+
+if [[ "${VERDICT}" == "sync-timeout" ]]; then
+  REASON=$(catchup_reason)
+  warn "the node is still behind after ${SYNC_WAIT}s (head ${NOW_HEAD:-?}, network ${NET:-?}, lag ${LAG:-?})"
+  [[ -n "${REASON}" ]] && warn "the last catch-up attempt said: ${REASON}"
+  warn "the node retries by itself - nothing was forced; re-run this step later"
+  set_status WAITING-SYNC "catch-up did not finish in ${SYNC_WAIT}s (lag ${LAG:-?}${REASON:+; ${REASON}})"
+  echo "RECOVER state=syncing head=${NOW_HEAD:-none} behind=${LAG:-none}"
+  exit 2
+fi
+log "in sync: head ${NOW_HEAD:-?} (lag ${BEST_LAG:-?}) - the set logic can run now"
+
+
+# --- 5. the node's own rejoin path -------------------------------------
+REJOIN=$(node_script 300 "sh controls/rejoin.sh --check" || true)
+REJOIN_LINE=$(printf '%s\n' "${REJOIN}" | grep -aE '^status = ' | tail -1 || true)
+log "rejoin        : ${REJOIN_LINE:-<no status line>}"
+REJOIN_STATE=$(printf '%s' "${REJOIN_LINE}" | sed -n 's/^status = \([a-z_]*\).*/\1/p')
+
+if [[ "${REJOIN_STATE}" == "validator_active" ]]; then
+  set_status DONE "back in the set: validator_active"
+  echo "RECOVER state=active head=${NOW_HEAD:-none}"
+  exit 0
+fi
+if [[ "${REJOIN_STATE}" == "validator_scheduled" ]]; then
+  set_status WAITING-FOLD "admitted to the next set - waiting for the fold ($(post_hint))"
+  echo "RECOVER state=scheduled head=${NOW_HEAD:-none}"
+  exit 2
+fi
+if printf '%s' "${REJOIN_LINE}" | grep -qi "used outside PM2"; then
+  die "the node still reports 'data directory is used outside PM2' - pm2 was not re-created (ALLOW_RESTART=${ALLOW_RESTART})"
+fi
+
+# the round is behind / readiness is stale: --meet-stage is the tool's own fix and
+# it does not stop the node (only --meet-start would, and that needs a stop)
+if printf '%s' "${REJOIN_LINE}" | grep -qE "round_lagging|round_unobserved|round_unconfirmed|not_ready_to_vote"; then
+  warn "the tool says the round/readiness is stale (${REJOIN_STATE}) - staging a rejoin (rejoin.sh --meet-stage)"
+  OUT=$(node_script 600 "sh controls/rejoin.sh --meet-stage" || true)
+  printf '%s\n' "${OUT}" | grep -aE '^(status|event|round) = ' | sed 's/^/    /' || true
+  STAGE_STATE=$(printf '%s\n' "${OUT}" | grep -aE '^status = ' | tail -1 | sed -n 's/^status = \([a-z_]*\).*/\1/p' || true)
+  log "meet-stage    : ${STAGE_STATE:-<no status line>}"
+  case "${STAGE_STATE}" in
+    "meet_staged")
+      log "the rejoin is staged - the node asks for a round when it is ready (no restart, no exit)" ;;
+    "refused")
+      warn "rejoin refused: $(printf '%s\n' "${OUT}" | grep -aE '^status = ' | tail -1)" ;;
+    *) : ;;
+  esac
+fi
+
+# --- 6. re-publish readiness (idempotent: the bond is already on chain) --
+ENROLL=$(rpc_field octra_validatorEnrollment '[]' state)
+if [[ "${ENROLL}" == "bonded" ]]; then
+  log "enrollment is 'bonded' without readiness - publishing it again (enroll.sh join)"
+  OUT=$(node_script 900 "sh controls/enroll.sh join" || true)
+  printf '%s\n' "${OUT}" | grep -aE '^(event|status) = ' | tail -6 | sed 's/^/    /' || true
+elif [[ "${ENROLL}" == "ready" ]]; then
+  log "enrollment is 'ready' - the bond and the readiness are on chain; only the set fold is missing"
+fi
+
+# --- 7. wait for the fold ----------------------------------------------
+START=$(date +%s)
+LAST=${START}
+while :; do
+  OUT=$(node_script 180 "sh controls/rejoin.sh --check" || true)
+  LINE=$(printf '%s\n' "${OUT}" | grep -aE '^status = ' | tail -1 || true)
+  STATE=$(printf '%s' "${LINE}" | sed -n 's/^status = \([a-z_]*\).*/\1/p')
+  if [[ "${STATE}" == "validator_active" ]]; then
+    log "back in the set: $(rpc_field octra_validatorEnrollment '[]' head_epoch)"
+    set_status DONE "back in the set: validator_active (rejoin=${STATE})"
+    echo "RECOVER state=active head=$(head_epoch)"
+    exit 0
+  fi
+  if (( $(date +%s) - START >= FOLD_WAIT )); then
+    warn "the node is in sync but the set has not admitted it yet (${LINE:-no status})"
+    warn "this is a chain event now - the console keeps watching and reports the activation"
+    set_status WAITING-FOLD "in sync, waiting for the set fold (${STATE:-unknown})"
+    echo "RECOVER state=waiting_fold head=$(head_epoch)"
+    exit 2
+  fi
+  if (( $(date +%s) - LAST >= PROGRESS_SEC )); then
+    log "  waiting for the fold: ${LINE:-no status} ($(post_hint))"
+    LAST=$(date +%s)
+  fi
+  sleep "${POLL}"
+done
+
+fi

package/assets/manage/30-status.sh

@@ -0,0 +1,64 @@
+#!/usr/bin/env bash
+# ===================================================================
+# 30-status.sh - read-only overview of the ACTIVE node
+#
+# Prints what the console shows for the manage program: identity, membership,
+# bond, wallet balance, the saved bond-increase record and the validator
+# pointer. It signs nothing, restarts nothing.
+#
+# Usage:  sudo bash 30-status.sh
+# ===================================================================
+
+set -euo pipefail
+source "$(dirname "$0")/lib.sh"
+
+require_root
+set_status RUNNING "status"
+
+ensure_tool jq jq || die "jq is missing and could not be installed"
+ensure_tool curl curl || die "curl is missing and could not be installed"
+
+read_state
+ADDR=$(wallet_address || echo unknown)
+PORT=$(node_env_value OCTRA_API_PORT)
+PORT="${PORT:-8080}"
+
+rpc() {  # rpc <method> <params-json>
+  timeout 20 curl -s -X POST -H 'Content-Type: application/json' \
+    -d "{\"jsonrpc\":\"2.0\",\"id\":1,\"method\":\"$1\",\"params\":$2}" \
+    "http://127.0.0.1:${PORT}/rpc" 2>/dev/null || true
+}
+
+BALANCE_RAW=$(rpc octra_balance "[\"${ADDR}\"]" | jq -r '.result.balance // empty' 2>/dev/null || true)
+[[ "${BALANCE_RAW}" =~ ^[0-9]+$ ]] || BALANCE_RAW=0
+
+log "=== active node: $(hostname) ==="
+log "wallet        : ${ADDR}"
+log "role          : ${ROLE:-?}   process: ${PROCESS:-?}   rpc: ${RPC:-?}   voting: ${VOTING:-?}"
+log "epoch         : ${EPOCH:-?}"
+log "membership    : active=${ACTIVE:-?} scheduled=${SCHED:-?} enrollment=${ENROLL:-?}"
+log "bond          : $(raw_to_oct "${BOND:-0}") OCT"
+log "wallet balance: $(raw_to_oct "${BALANCE_RAW}") OCT"
+
+PATH_SAVED=$(saved_increase_path)
+if [[ -n "${PATH_SAVED}" ]]; then
+  log "saved increase:"
+  jq -r '"    amount = \(.amount) raw, stage = \(.stage), tx = \(.tx_hash)"' "${PATH_SAVED}" 2>/dev/null | sed 's/^/  /' || true
+  log "  a further increase needs --new (the console adds it automatically)"
+else
+  log "saved increase: none (the next increase is the first one, no --new)"
+fi
+
+log "--- enroll.sh status ---"
+node_script 120 "sh controls/enroll.sh status" | grep -E '^(event = (membership|committed_enrollment|enrollment_tx|validator_pointer))' | sed 's/^/    /' || true
+
+# an exit leaves the withdrawal to the host timer: say where it stands, so the
+# operator never has to re-run a phase (or read a systemd unit) to find out
+EXIT_WATCH=$(exit_watch_status || true)
+if [[ -n "${EXIT_WATCH}" ]]; then
+  log "--- withdrawal ---"
+  log "    ${EXIT_WATCH}"
+  log "    retried every 15 minutes by ${EXIT_WATCH_UNIT}.timer (also after a reboot)"
+fi
+
+set_status DONE "role=${ROLE:-?} active=${ACTIVE:-?} bond=$(raw_to_oct "${BOND:-0}") OCT balance=$(raw_to_oct "${BALANCE_RAW}") OCT"

package/assets/manage/40-exit-withdraw.sh

@@ -0,0 +1,133 @@
+#!/usr/bin/env bash
+# ===================================================================
+# 40-exit-withdraw.sh - finish an exit: withdraw the stake when the chain allows it
+#
+# Installed by 20-exit-validator.sh as `octra-exit-withdraw.timer` (every 15
+# minutes, also after a reboot). The chain only signs the withdrawal once the
+# unbonding period is over AND the validator is out of the set - which can be
+# weeks after the exit itself, far too long for a console step, and nobody
+# should have to re-run anything by hand. So this job runs on the host:
+#
+#   * not yet allowed      -> one line in exit-watch.log, the next run retries
+#   * the chain allows it  -> `controls/enroll.sh withdraw`, wait for
+#                             validator_bond = 0, then disarm its own timer
+#
+# It never writes /root/manage/status: that file is the verdict of a step the
+# console follows, and a timer must not overwrite it.
+#
+# Usage:  sudo bash 40-exit-withdraw.sh     (the timer runs this for you)
+# Env:    WITHDRAW_TIMEOUT=<sec>  bound for enroll.sh withdraw (default 900)
+#         BOND_WAIT=<sec>         wait for validator_bond = 0 (default 600)
+# ===================================================================
+set -uo pipefail
+source "$(dirname "$0")/lib.sh"
+
+# a timer job must never touch a step's verdict, and it must survive a command it
+# is *expecting* to fail (the chain refuses a withdrawal that is too early):
+# lib.sh turns `set -e` on, so it is turned off here again.
+trap - ERR
+set +e
+WATCH_STATUS="${EXIT_WATCH_STATUS:-${MANAGE_DIR}/exit-watch.status}"
+WATCH_LOG="${EXIT_WATCH_LOG:-${MANAGE_DIR}/exit-watch.log}"
+WITHDRAW_TIMEOUT="${WITHDRAW_TIMEOUT:-900}"
+BOND_WAIT="${BOND_WAIT:-600}"
+
+mkdir -p "${MANAGE_DIR}" 2>/dev/null || true
+log() { echo -e "[exit-watch] $(date -u +%Y-%m-%dT%H:%M:%SZ) $*" | tee -a "${WATCH_LOG}"; }
+
+record() {  # record <RESULT> <detail...> - read by the console (30-status.sh)
+  local result="$1"
+  shift
+  printf '%s %s %s\n' "${result}" "$(date -u +%Y-%m-%dT%H:%M:%SZ)" "$*" > "${WATCH_STATUS}"
+}
+
+summary_value() { printf '%s' "$1" | sed -n "s/.*$2=\([^ ]*\).*/\1/p"; }
+
+enrollment_summary() {
+  local events state exit_ep withdraw_ep head remaining
+  events=$(node_script 120 "sh controls/enroll.sh status" || true)
+  state=$(printf '%s\n' "${events}" | grep -oE 'committed_enrollment state = [a-z]+' | awk '{print $4}' | tail -1 || true)
+  exit_ep=$(printf '%s\n' "${events}" | grep -oE 'exit_epoch = [0-9]+' | awk '{print $3}' | tail -1 || true)
+  withdraw_ep=$(printf '%s\n' "${events}" | grep -oE 'withdraw_epoch = [0-9]+' | awk '{print $3}' | tail -1 || true)
+  head=$(printf '%s\n' "${events}" | grep -oE 'head_epoch = [0-9]+' | awk '{print $3}' | tail -1 || true)
+  remaining=$(printf '%s\n' "${events}" | grep -oE 'remaining_epochs = [0-9]+' | awk '{print $3}' | tail -1 || true)
+  printf 'state=%s exit_epoch=%s withdraw_epoch=%s head=%s remaining=%s\n' \
+    "${state:-unknown}" "${exit_ep:-none}" "${withdraw_ep:-none}" "${head:-0}" "${remaining:-none}"
+}
+
+read_state
+ADDR=$(wallet_address || echo unknown)
+
+# --- already finished? -------------------------------------------------
+if [[ "${BOND:-0}" == "0" && "${ENROLL:-}" != "bonded" && "${ENROLL:-}" != "ready" && "${ENROLL:-}" != "exiting" ]]; then
+  log "${ADDR}: no bond on chain any more (enrollment=${ENROLL:-absent}) - the exit is complete"
+  record DONE "bond 0 (enrollment=${ENROLL:-absent}) - nothing left to withdraw"
+  exit_watch_disarm
+  exit 0
+fi
+
+
+SUMMARY=$(enrollment_summary)
+STATE=$(summary_value "${SUMMARY}" state)
+WITHDRAW_EP=$(summary_value "${SUMMARY}" withdraw_epoch)
+HEAD=$(summary_value "${SUMMARY}" head)
+REMAINING=$(summary_value "${SUMMARY}" remaining)
+
+if [[ "${STATE}" != "exiting" ]]; then
+  log "${ADDR}: the exit is not committed yet (enrollment=${ENROLL:-?}, state=${STATE:-unknown}) - the console submits it"
+  record WAITING "exit not committed yet (state=${STATE:-unknown}, enrollment=${ENROLL:-?})"
+  exit 0
+fi
+
+if [[ "${REMAINING}" =~ ^[0-9]+$ ]] && (( REMAINING > 0 )); then
+  RATE=$(epoch_seconds || true)
+  ETA=""
+  if [[ -n "${RATE}" ]]; then
+    SECS=$(epoch_eta "${REMAINING}" "${RATE}" || true)
+    [[ -n "${SECS}" ]] && ETA=$(fmt_duration "${SECS}")
+  fi
+  log "${ADDR}: unbonding - head ${HEAD} of unlock epoch ${WITHDRAW_EP}, ${REMAINING} epoch(s) left${ETA:+ (about ${ETA})}"
+  record WAITING "unbonding: head ${HEAD} of ${WITHDRAW_EP} (${REMAINING} epoch(s) left${ETA:+, about ${ETA}})"
+  exit 0
+fi
+
+# --- the chain allows the withdrawal now -------------------------------
+if [[ "${ACTIVE:-false}" == "true" || "${SCHED:-false}" == "true" ]]; then
+  log "${ADDR}: unbonding over, but the validator is still in the set (active=${ACTIVE:-?} scheduled=${SCHED:-?}) - retrying"
+  record WAITING "unbonding over, still in the set (active=${ACTIVE:-?} scheduled=${SCHED:-?})"
+  exit 0
+fi
+
+log "${ADDR}: unbonding over (head ${HEAD}, unlock epoch ${WITHDRAW_EP}) - signing the withdrawal"
+# no `|| true` here: the exit status of the signing attempt decides whether this
+# run is a WAITING (the chain refuses) or an ERROR (something is wrong)
+OUT=$(node_script "${WITHDRAW_TIMEOUT}" "sh controls/enroll.sh withdraw")
+RC=$?
+printf '%s\n' "${OUT}" | sed 's/^/    /' >> "${WATCH_LOG}"
+if (( RC != 0 )) && ! printf '%s' "${OUT}" | grep -qE "already|previously_confirmed"; then
+  if printf '%s' "${OUT}" | grep -qE "unbonding period incomplete|waits for removal"; then
+    log "the chain still refuses the withdrawal ($(printf '%s' "${OUT}" | grep -oE 'unbonding period incomplete.*|withdrawal waits.*' | tail -1)) - retrying"
+    record WAITING "chain refused the withdrawal - retrying every 15 min"
+    exit 0
+  fi
+  log "the withdrawal failed (exit ${RC}) - see the lines above; the next run retries"
+  record ERROR "withdraw failed (exit ${RC})"
+  exit 1
+fi
+
+START=$(date +%s)
+while :; do
+  read_state
+  if [[ "${BOND:-0}" == "0" ]]; then
+    log "${ADDR}: stake returned - validator_bond = 0, the exit is complete"
+    record DONE "stake returned (bond 0, exit epoch $(summary_value "${SUMMARY}" exit_epoch))"
+    exit_watch_disarm
+    exit 0
+  fi
+  if (( $(date +%s) - START >= BOND_WAIT )); then
+    log "${ADDR}: withdrawal submitted, the registry still shows $(raw_to_oct "${BOND:-0}") OCT - retrying"
+    record WAITING "withdraw submitted, bond still $(raw_to_oct "${BOND:-0}") OCT"
+    exit 0
+  fi
+  sleep 20
+done