openship 0.4.5 → 0.4.7

package/dist/server/engine/samples/dovecot/dovecot-last-login.conf

@@ -0,0 +1,50 @@
+connect = host=PH_SQL_SERVER_ADDRESS port=PH_SQL_SERVER_PORT dbname=PH_LAST_LOGIN_DB_NAME user=PH_LAST_LOGIN_DB_USER password=PH_LAST_LOGIN_DB_PASSWORD
+
+map {
+    pattern = shared/last-login/imap/$user/$domain
+    table = last_login
+    value_field = imap
+    value_type = uint
+
+    fields {
+        username = $user
+        domain = $domain
+    }
+}
+
+map {
+    pattern = shared/last-login/pop3/$user/$domain
+    table = last_login
+    value_field = pop3
+    value_type = uint
+
+    fields {
+        username = $user
+        domain = $domain
+    }
+}
+
+map {
+    pattern = shared/last-login/lda/$user/$domain
+    table = last_login
+    value_field = lda
+    value_type = uint
+
+    fields {
+        username = $user
+        domain = $domain
+    }
+}
+
+# Treat lmtp as lda.
+map {
+    pattern = shared/last-login/lmtp/$user/$domain
+    table = last_login
+    value_field = lda
+    value_type = uint
+
+    fields {
+        username = $user
+        domain = $domain
+    }
+}

package/dist/server/engine/samples/dovecot/dovecot-ldap.conf

@@ -0,0 +1,21 @@
+hosts           = PH_LDAP_SERVER_HOST:PH_LDAP_SERVER_PORT
+ldap_version    = PH_LDAP_BIND_VERSION
+auth_bind       = yes
+dn              = PH_LDAP_BINDDN
+dnpass          = PH_LDAP_BINDPW
+base            = PH_LDAP_BASEDN
+scope           = subtree
+deref           = never
+debug_level     = 0
+
+# Below two are required by command 'doveadm mailbox ...'
+#iterate_attrs   = mail=user
+#iterate_filter  = (&(objectClass=mailUser)(accountStatus=active)(!(domainStatus=disabled))(enabledService=mail))
+
+user_filter     = (&(objectClass=mailUser)(accountStatus=active)(!(domainStatus=disabled))(enabledService=mail)(enabledService=%Ls%Lc)(|(mail=%u)(&(enabledService=shadowaddress)(shadowAddress=%u))))
+user_attrs      = mail=master_user,mail=user,=home=%L{ldap:homeDirectory},=mail=%{ldap:mailboxFormat:maildir}:~/%{ldap:mailboxFolder:Maildir}/,mailQuota=quota_rule=*:bytes=%$
+
+# Used for dn lookup
+pass_filter     = (&(objectClass=mailUser)(accountStatus=active)(!(domainStatus=disabled))(enabledService=mail)(enabledService=%Ls%Lc)(|(mail=%u)(&(enabledService=shadowaddress)(shadowAddress=%u))))
+pass_attrs      = mail=user,userPassword=password,allowNets=allow_nets
+default_pass_scheme = CRYPT

package/dist/server/engine/samples/dovecot/dovecot-share-folder.conf

@@ -0,0 +1,22 @@
+connect = host=PH_SQL_SERVER_ADDRESS port=PH_SQL_SERVER_PORT dbname=PH_DOVECOT_SHARE_FOLDER_DB_NAME user=PH_DOVECOT_SHARE_FOLDER_DB_USER password=PH_DOVECOT_SHARE_FOLDER_DB_PASSWORD
+map {
+    pattern = shared/shared-boxes/user/$to/$from
+    table = PH_DOVECOT_SHARE_FOLDER_DB_TABLE
+    value_field = dummy
+
+    fields {
+        from_user = $from
+        to_user = $to
+    }
+}
+
+# To share mailbox to anyone, please uncomment 'acl_anyone = allow' in
+# dovecot.conf
+map {
+    pattern = shared/shared-boxes/anyone/$from
+    table = PH_DOVECOT_SHARE_FOLDER_ANYONE_DB_TABLE
+    value_field = dummy
+    fields {
+        from_user = $from
+    }
+}

package/dist/server/engine/samples/dovecot/dovecot-sql.conf

@@ -0,0 +1,28 @@
+driver = PH_SQL_DRIVER
+default_pass_scheme = CRYPT
+connect = host=PH_SQL_SERVER_ADDRESS port=PH_SQL_SERVER_PORT dbname=PH_VMAIL_DB_NAME user=PH_VMAIL_DB_BIND_USER password=PH_VMAIL_DB_BIND_PASSWD
+
+# Required by doveadm tools which require to list all mail users.
+iterate_query = SELECT username AS user FROM mailbox
+
+password_query = SELECT mailbox.password, mailbox.allow_nets \
+        FROM mailbox,domain \
+       WHERE mailbox.username='%u' \
+             AND mailbox.enable%Ls%Lc=1 \
+             AND mailbox.active=1 \
+             AND mailbox.domain=domain.domain \
+             AND domain.backupmx=0 \
+             AND domain.active=1
+
+user_query = SELECT \
+            LOWER('%u') AS master_user, \
+            LOWER(CONCAT(mailbox.storagebasedirectory, '/', mailbox.storagenode, '/', mailbox.maildir)) AS home, \
+            CONCAT(mailbox.mailboxformat, ':~/', mailbox.mailboxfolder) AS mail, \
+            CONCAT('*:bytes=', mailbox.quota*1048576) AS quota_rule \
+        FROM mailbox,domain \
+       WHERE mailbox.username='%u' \
+             AND mailbox.enable%Ls%Lc=1 \
+             AND mailbox.active=1 \
+             AND mailbox.domain=domain.domain \
+             AND domain.backupmx=0 \
+             AND domain.active=1

package/dist/server/engine/samples/dovecot/dovecot-used-quota.conf

@@ -0,0 +1,13 @@
+connect = host=PH_SQL_SERVER_ADDRESS port=PH_SQL_SERVER_PORT dbname=PH_REALTIME_QUOTA_DB_NAME user=PH_REALTIME_QUOTA_DB_USER password=PH_REALTIME_QUOTA_DB_PASSWORD
+map {
+    pattern = priv/quota/storage
+    table = PH_DOVECOT_REALTIME_QUOTA_TABLE
+    username_field = username
+    value_field = bytes
+}
+map {
+    pattern = priv/quota/messages
+    table = PH_DOVECOT_REALTIME_QUOTA_TABLE
+    username_field = username
+    value_field = messages
+}

package/dist/server/engine/samples/dovecot/dovecot.conf

@@ -0,0 +1,484 @@
+# More details about Dovecot settings: https://doc.dovecot.org
+
+# Listen addresses.
+#   - '*' means all available IPv4 addresses.
+#   - '[::]' means all available IPv6 addresses.
+# Listen on all available addresses by default
+listen = * [::]
+
+#base_dir = PH_BASE_DIR
+mail_plugins = quota mailbox_alias acl mail_log notify
+
+# Enabled mail protocols.
+protocols = PH_PROTOCOLS
+
+# User/group who owns the message files:
+mail_uid = PH_MAIL_UID
+mail_gid = PH_MAIL_GID
+
+# Assign uid to virtual users.
+first_valid_uid = PH_FIRST_VALID_UID
+last_valid_uid = PH_LAST_VALID_UID
+
+# Logging. Reference: http://wiki2.dovecot.org/Logging
+#
+# Use syslog
+syslog_facility = PH_IREDMAIL_SYSLOG_FACILITY
+
+# Debug
+#mail_debug = yes
+#auth_verbose = yes
+#auth_debug = yes
+#auth_debug_passwords = yes
+
+# Possible values: no, yes, plain, sha1.
+# Set to 'yes' or 'plain', to output plaintext password (NOT RECOMMENDED).
+#auth_verbose_passwords = no
+
+# SSL: Global settings.
+# Refer to wiki site for per protocol, ip, server name SSL settings:
+# http://wiki2.dovecot.org/SSL/DovecotConfiguration
+ssl_min_protocol = TLSv1.2
+ssl = required
+verbose_ssl = no
+#ssl_ca = </path/to/ca
+ssl_cert = <PH_SSL_CERT
+ssl_key = <PH_SSL_KEY
+ssl_dh = <PH_SSL_DH1024_PARAM_FILE
+
+# Fix 'The Logjam Attack'
+ssl_cipher_list = PH_SSL_CIPHERS
+ssl_prefer_server_ciphers = yes
+
+# With disable_plaintext_auth=yes AND ssl=required, STARTTLS is mandatory.
+# Set disable_plaintext_auth=no AND ssl=yes to allow plain password transmitted
+# insecurely.
+disable_plaintext_auth = yes
+
+# Allow plain text password per IP address/net
+#remote 192.168.0.0/24 {
+#   disable_plaintext_auth = no
+#}
+
+# Mail location and mailbox format.
+mail_location = maildir:%Lh/Maildir/:INDEX=%Lh/Maildir/
+
+# Authentication related settings.
+# Append this domain name if client gives empty realm.
+#auth_default_realm = PH_AUTH_DEFAULT_REALM
+
+# Authentication mechanisms.
+auth_mechanisms = PLAIN LOGIN
+
+# Limits the number of users that can be logging in at the same time.
+# Default is 100. This can be overridden by `process_limit =` in
+# `service [protocol]` block.
+# e.g.
+#       protocol imap-login {
+#           ...
+#           process_limit = 500
+#       }
+#default_process_limit = 100
+
+# Login log elements.
+# Add '%k' for detailed SSL protocol and cipher information.
+# e.g. "TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)"
+login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c %k session=<%{session}>
+
+# Mail delivery log format
+deliver_log_format = from=%{from}, envelope_sender=%{from_envelope}, subject=%{subject}, msgid=%m, size=%{size}, delivery_time=%{delivery_time}ms, %$
+
+service auth {
+    unix_listener PH_POSTFIX_CHROOT_DIR/private/dovecot-auth {
+        user = PH_DOVECOT_AUTH_USER
+        group = PH_DOVECOT_AUTH_GROUP
+        mode = 0666
+    }
+    unix_listener auth-master {
+        user = PH_AUTH_MASTER_USER
+        group = PH_AUTH_MASTER_GROUP
+        mode = 0666
+    }
+    unix_listener auth-userdb {
+        user = PH_AUTH_MASTER_USER
+        group = PH_AUTH_MASTER_GROUP
+        mode = 0660
+    }
+}
+
+# LMTP server (Local Mail Transfer Protocol).
+# Reference: http://wiki2.dovecot.org/LMTP
+service lmtp {
+    user = PH_AUTH_MASTER_USER
+
+    # For higher volume sites, it may be desirable to increase the number of
+    # active listener processes. A range of 5 to 20 is probably good for most
+    # sites.
+    process_min_avail = 5
+
+    # Logging.
+    executable = lmtp -L
+
+    # Listening on socket file and TCP
+    unix_listener PH_POSTFIX_CHROOT_DIR/private/dovecot-lmtp {
+        user = PH_DOVECOT_AUTH_USER
+        group = PH_DOVECOT_AUTH_GROUP
+        mode = 0666
+    }
+
+    inet_listener lmtp {
+        # Listen on localhost (ipv4)
+        address = PH_LMTP_BIND_ADDRESS
+        port = PH_LMTP_BIND_PORT
+    }
+}
+
+# Virtual mail accounts.
+userdb {
+    args = PH_USERDB_ARGS
+    driver = PH_USERDB_DRIVER
+}
+passdb {
+    args = PH_PASSDB_ARGS
+    driver = PH_PASSDB_DRIVER
+}
+
+# Master user.
+# Master users are able to log in as other users. It's also possible to
+# directly log in as any user using a master password, although this isn't
+# recommended.
+# Reference: http://wiki2.dovecot.org/Authentication/MasterUsers
+auth_master_user_separator = *
+passdb {
+    driver = passwd-file
+    args = PH_DOVECOT_MASTER_USER_PASSWORD_FILE
+    master = yes
+}
+
+plugin {
+    # Quota configuration.
+    # Reference: http://wiki2.dovecot.org/Quota/Configuration
+    quota = PH_QUOTA_TYPE
+
+    # Set default quota rule if no quota returned from SQL/LDAP query.
+    #quota_rule = *:storage=1G
+    #quota_rule2 = *:messages=0
+    #quota_rule3 = Trash:storage=1G
+    #quota_rule4 = Junk:ignore
+
+    # Quota warning.
+    #
+    # If user suddenly receives a huge mail and the quota jumps from
+    # 85% to 95%, only the 95% script is executed.
+    #
+    # Only the command for the first exceeded limit is executed, so configure
+    # the highest limit first.
+    quota_warning = storage=100%% quota-warning 100 %u
+    quota_warning2 = storage=95%% quota-warning 95 %u
+    quota_warning3 = storage=90%% quota-warning 90 %u
+    quota_warning4 = storage=85%% quota-warning 85 %u
+
+    # allow user to become max 10% (or 50 MB) over quota
+    quota_grace = 10%%
+    #quota_grace = 50 M
+
+    # Custom Quota Exceeded Message.
+    # You can specify the message directly or read the message from a file.
+    #quota_exceeded_message = Quota exceeded, please try again later.
+    #quota_exceeded_message = </path/to/quota_exceeded_message.txt
+
+    # Used by quota-status service.
+    quota_status_success = DUNNO
+    quota_status_nouser = DUNNO
+    quota_status_overquota = "552 5.2.2 Mailbox is full"
+
+    # ACL and share folder
+    acl = vfile
+    acl_shared_dict = proxy::acl
+
+    # By default Dovecot doesn't allow using the IMAP "anyone" or
+    # "authenticated" identifier, because it would be an easy way to spam
+    # other users in the system. If you wish to allow it,
+    #acl_anyone = allow
+
+    # Pigeonhole managesieve service.
+    # Reference: http://wiki2.dovecot.org/Pigeonhole/Sieve/Configuration
+    # Per-user sieve settings.
+    sieve_dir = ~/sieve
+    sieve = ~/sieve/PH_SIEVE_RULE_FILENAME
+
+    # Global sieve settings.
+    sieve_global_dir = PH_SIEVE_DIR
+    # Note: if user has personal sieve script, global sieve rules defined in
+    #       sieve_default will be ignored. Please use sieve_before or
+    #       sieve_after instead.
+    #sieve_default =
+
+    sieve_before = PH_GLOBAL_SIEVE_FILE
+    #sieve_after =
+
+    # The maximum number of redirect actions that can be performed during a
+    # single script execution.
+    # The meaning of 0 differs based on your version. For pigeonhole-0.3.0 and
+    # beyond this means that redirect is prohibited. For older versions,
+    # however, this means that the number of redirects is unlimited.
+    sieve_max_redirects = 30
+
+    # Use recipient as vacation message sender instead of null sender (<>).
+    sieve_vacation_send_from_recipient = yes
+
+    # Reference: http://wiki2.dovecot.org/Plugins/MailboxAlias
+    mailbox_alias_old = Sent
+    mailbox_alias_new = Sent Messages
+    mailbox_alias_old2 = Sent
+    mailbox_alias_new2 = Sent Items
+
+    # Events to log. `autoexpunge` is included in `expunge`
+    # Defined in https://github.com/dovecot/core/blob/master/src/plugins/mail-log/mail-log-plugin.c
+    mail_log_events = delete undelete expunge copy mailbox_create mailbox_delete mailbox_rename
+    mail_log_fields = uid box msgid size from subject flags
+
+    # Track user last login
+    last_login_dict = proxy::lastlogin
+    last_login_key = last-login/%s/%u/%d
+}
+
+service stats {
+    fifo_listener stats-mail {
+        user = PH_DOVECOT_SERVICE_STATS_USER
+        mode = 0644
+    }
+
+    unix_listener stats-writer {
+        user = PH_DOVECOT_SERVICE_STATS_USER
+        group = PH_DOVECOT_SERVICE_STATS_GROUP
+        mode = 0660
+    }
+
+    inet_listener {
+        address = 127.0.0.1
+        port = PH_DOVECOT_SERVICE_STATS_PORT
+    }
+}
+
+service quota-warning {
+    executable = script PH_QUOTA_WARNING_SCRIPT
+    unix_listener quota-warning {
+        user = PH_QUOTA_WARNING_USER
+        group = PH_QUOTA_WARNING_GROUP
+        mode = 0660
+    }
+}
+
+service quota-status {
+    # '-p <protocol>'. Currently only 'postfix' protocol is supported.
+    executable = quota-status -p postfix
+    client_limit = 1
+    inet_listener {
+        address = PH_DOVECOT_SERVICE_QUOTA_STATUS_BIND_ADDRESS
+        port = PH_DOVECOT_SERVICE_QUOTA_STATUS_PORT
+    }
+}
+
+service dict {
+    unix_listener dict {
+        mode = 0660
+        user = PH_SERVICE_DICT_USER
+        group = PH_SERVICE_DICT_GROUP
+    }
+}
+
+dict {
+    quotadict = PH_DOVECOT_SQL_DBN:PH_DOVECOT_REALTIME_QUOTA_CONF
+    acl = PH_DOVECOT_SQL_DBN:PH_DOVECOT_SHARE_FOLDER_CONF
+    lastlogin = PH_DOVECOT_SQL_DBN:PH_DOVECOT_LAST_LOGIN_CONF
+}
+
+protocol lda {
+    mail_plugins = $mail_plugins sieve last_login
+    lda_mailbox_autocreate = yes
+    lda_mailbox_autosubscribe = yes
+}
+
+protocol lmtp {
+    # Plugins
+    mail_plugins = $mail_plugins sieve last_login
+
+    # Address extension delivery
+    lmtp_save_to_detail_mailbox = yes
+    recipient_delimiter = +
+}
+
+protocol imap {
+    mail_plugins = $mail_plugins imap_quota imap_acl last_login
+    imap_client_workarounds = tb-extra-mailbox-sep
+
+    # Maximum number of IMAP connections allowed for a user from each IP address.
+    # NOTE: The username is compared case-sensitively.
+    # Default is 10.
+    # Increase it to avoid issue like below:
+    # "Maximum number of concurrent IMAP connections exceeded"
+    mail_max_userip_connections = 30
+}
+
+protocol pop3 {
+    mail_plugins = $mail_plugins last_login
+    pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
+    pop3_uidl_format = %08Xu%08Xv
+
+    # Maximum number of IMAP connections allowed for a user from each IP address.
+    # NOTE: The username is compared case-sensitively.
+    # Default is 10.
+    mail_max_userip_connections = 30
+
+    # POP3 logout format string:
+    #  %i - total number of bytes read from client
+    #  %o - total number of bytes sent to client
+    #  %t - number of TOP commands
+    #  %p - number of bytes sent to client as a result of TOP command
+    #  %r - number of RETR commands
+    #  %b - number of bytes sent to client as a result of RETR command
+    #  %d - number of deleted messages
+    #  %m - number of messages (before deletion)
+    #  %s - mailbox size in bytes (before deletion)
+    # Default format doesn't have 'in=%i, out=%o'.
+    #pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s, in=%i, out=%o
+}
+
+# Login processes. Refer to Dovecot wiki for more details:
+# http://wiki2.dovecot.org/LoginProcess
+service imap-login {
+    #inet_listener imap {
+    #    port = 143
+    #}
+    #inet_listener imaps {
+    #    port = 993
+    #    ssl = yes
+    #}
+
+    service_count = 1
+
+    # To avoid startup latency for new client connections, set process_min_avail
+    # to higher than zero. That many idling processes are always kept around
+    # waiting for new connections.
+    #process_min_avail = 0
+
+    # number of simultaneous IMAP connections
+    process_limit = 500
+
+    # vsz_limit should be fine at its default 64MB value
+    #vsz_limit = 64M
+}
+
+service pop3-login {
+    #inet_listener pop3 {
+    #    port = 110
+    #}
+    #inet_listener pop3s {
+    #    port = 995
+    #    ssl = yes
+    #}
+
+    service_count = 1
+
+    # number of simultaneous POP3 connections
+    #process_limit = 500
+}
+
+service managesieve-login {
+    inet_listener sieve {
+        # Listen on localhost (ipv4)
+        address = PH_MANAGESIEVE_BIND_HOST
+        port = PH_MANAGESIEVE_BIND_PORT
+    }
+}
+
+namespace inbox {
+    type = private
+    separator = /
+    prefix =
+    inbox = yes
+
+    # Refer to document for more details about alias mailbox:
+    # http://wiki2.dovecot.org/MailboxSettings
+    #
+    # Sent
+    mailbox Sent {
+        auto = subscribe
+        special_use = \Sent
+    }
+    mailbox "Sent Messages" {
+        auto = no
+        special_use = \Sent
+    }
+    mailbox "Sent Items" {
+        auto = no
+        special_use = \Sent
+    }
+
+    mailbox Drafts {
+        auto = subscribe
+        special_use = \Drafts
+    }
+
+    # Trash
+    mailbox Trash {
+        auto = subscribe
+        special_use = \Trash
+    }
+
+    mailbox "Deleted Messages" {
+        auto = no
+        special_use = \Trash
+    }
+
+    # Junk
+    mailbox Junk {
+        auto = subscribe
+        special_use = \Junk
+    }
+    mailbox Spam {
+        auto = no
+        special_use = \Junk
+    }
+    mailbox "Junk E-mail" {
+        auto = no
+        special_use = \Junk
+    }
+
+    # Archive
+    mailbox Archive {
+        auto = no
+        special_use = \Archive
+    }
+    mailbox Archives {
+        auto = no
+        special_use = \Archive
+    }
+}
+
+namespace shared {
+    type = shared
+    separator = /
+    prefix = Shared/%%u/
+    location = maildir:%%Lh/Maildir/:INDEX=%%Lh/Maildir/Shared/%%Ld/%%Ln
+
+    # this namespace should handle its own subscriptions or not.
+    subscriptions = yes
+    list = children
+}
+
+# Public mailboxes.
+# Refer to Dovecot wiki page for more details:
+# http://wiki2.dovecot.org/SharedMailboxes/Public
+#namespace public {
+#    type = public
+#    separator = /
+#    prefix = Public/
+#    location = maildir:PH_PUBLIC_MAILBOX_DIR:CONTROL=%Lh/Maildir/public:INDEXPVT=%Lh/Maildir/public
+#
+#    # Allow users to subscribe to the public folders.
+#    subscriptions = yes
+#}
+
+!include_try PH_DOVECOT_CONF_INCLUDE_DIR/*.conf

package/dist/server/engine/samples/dovecot/dovecot.sieve

@@ -0,0 +1,7 @@
+require ["fileinto"];
+
+# rule:[Move Spam to Junk Folder]
+if header :is "X-Spam-Flag" "YES"
+{
+    fileinto "Junk";
+}

package/dist/server/engine/samples/dovecot/dovecot2-quota-warning.sh

@@ -0,0 +1,38 @@
+#!/usr/bin/env bash
+# Purpose: Mail to user when his/her quota exceeds specified percentage.
+# Reference: http://wiki2.dovecot.org/Quota/Configuration#Quota_warnings
+
+PERCENT=${1}
+USER=${2}
+
+hostname="$(hostname -f)"
+
+# Use "plugin/quota=maildir:User quota:noenforcing" for maildir quota.
+cat << EOF | PH_DOVECOT_DELIVER_BIN -d ${USER} -o "plugin/quota=dict:User quota::noenforcing:proxy::quotadict"
+From: no-reply@${hostname}
+To: ${USER}
+Subject: Warning: Your mailbox is now ${PERCENT}% full.
+Date: $(date -R)
+Message-ID: <$(date +%Y%m%d%H%M%S)-${RANDOM}@${hostname}>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+
+Your mailbox is now ${PERCENT}% full, please clean up some mails for further incoming mails.
+EOF
+
+# Send a copy to postmaster@ if mailbox is greater than or equal to 95% full.
+if [ ${PERCENT} -ge 95 ]; then
+    DOMAIN="$(echo ${USER} | awk -F'@' '{print $2}')"
+    cat << EOF | PH_DOVECOT_DELIVER_BIN -d postmaster@${DOMAIN} -o "plugin/quota=dict:User quota::noenforcing:proxy::quotadict"
+From: no-reply@$(hostname -f)
+To: postmaster@${DOMAIN}
+Subject: Mailbox Quota Warning: ${PERCENT}% full, ${USER}
+Date: $(date -R)
+Message-ID: <$(date +%Y%m%d%H%M%S)-${RANDOM}@${hostname}>
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+
+Mailbox (${USER}) is now ${PERCENT}% full, please clean up some mails for
+further incoming mails.
+EOF
+fi

package/dist/server/engine/samples/dovecot/sql/imap_share_folder.mysql

@@ -0,0 +1,16 @@
+#
+# IMAP shared folders. User 'from_user' shares folders to user 'to_user'.
+# WARNING: Works only with Dovecot 1.2+.
+#
+CREATE TABLE IF NOT EXISTS share_folder (
+  from_user VARCHAR(150) NOT NULL,
+  to_user VARCHAR(150) NOT NULL,
+  dummy CHAR(1),
+  PRIMARY KEY (from_user, to_user)
+);
+
+CREATE TABLE IF NOT EXISTS anyone_shares (
+    from_user VARCHAR(255) NOT NULL,
+    dummy CHAR(1) DEFAULT '1',
+    PRIMARY KEY (from_user)
+);

package/dist/server/engine/samples/dovecot/sql/last_login.mysql

@@ -0,0 +1,12 @@
+CREATE TABLE IF NOT EXISTS `last_login` (
+    `username` VARCHAR(255) NOT NULL DEFAULT '',
+    `domain` VARCHAR(255) NOT NULL DEFAULT '',
+    `imap` INT(11) DEFAULT NULL,
+    `pop3` INT(11) DEFAULT NULL,
+    `lda` INT(11) DEFAULT NULL,
+    PRIMARY KEY (`username`),
+    INDEX (`domain`),
+    INDEX (`imap`),
+    INDEX (`pop3`),
+    INDEX (`lda`)
+) ENGINE=InnoDB DEFAULT CHARSET=utf8;