opencode-router 0.11.170 → 0.11.172

package/LICENSE

@@ -1,3 +1,11 @@
+Copyright (c) 2026-present Different AI, Inc.
+
+Portions of this software are licensed as follows:
+
+* All content that resides under the /ee directory of this repository (Fair Source License) is licensed under the license defined in "ee/LICENSE".
+* All third party components incorporated into the OpenWork Software are licensed under the original license provided by the owner of the applicable component.
+* Content outside of the above mentioned directories or restrictions above is available under the "MIT" license as defined below.
+
 MIT License
 
 Copyright (c) 2026 Different AI

package/README.md

@@ -9,7 +9,7 @@ Runtime requirement: Bun 1.3+ (`bun --version`).
 One-command install (recommended):
 
 ```bash
-curl -fsSL https://raw.githubusercontent.com/different-ai/openwork/dev/packages/opencode-router/install.sh | bash
+curl -fsSL https://raw.githubusercontent.com/different-ai/openwork/dev/apps/opencode-router/install.sh | bash
 ```
 
 Install from npm:
@@ -29,10 +29,10 @@ Then configure identities and start.
 1) One-command setup (installs deps, builds, creates `.env` if missing):
 
 ```bash
-pnpm -C packages/opencode-router setup
+pnpm -C apps/opencode-router setup
 ```
 
-2) (Optional) Fill in `packages/opencode-router/.env` (see `.env.example`).
+2) (Optional) Fill in `apps/opencode-router/.env` (see `.env.example`).
 
 Required:
 - `OPENCODE_URL`
@@ -167,7 +167,7 @@ opencode-router send --channel slack --identity default --to D123 --file ./repor
 ## Defaults
 
 - SQLite at `~/.openwork/opencode-router/opencode-router.db` unless overridden.
-- Config stored at `~/.openwork/opencode-router/opencode-router.json` (created by `opencode-router` or `pnpm -C packages/opencode-router setup`).
+- Config stored at `~/.openwork/opencode-router/opencode-router.json` (created by `opencode-router` or `pnpm -C apps/opencode-router setup`).
 - Group chats are disabled unless `GROUPS_ENABLED=true`.
 
 ## Tests
@@ -176,13 +176,13 @@ opencode-router send --channel slack --identity default --to D123 --file ./repor
 
 ```bash
 opencode serve --port 4096 --hostname 127.0.0.1
-pnpm -C packages/opencode-router test:smoke
+pnpm -C apps/opencode-router test:smoke
 ```
 
 Other test suites:
 
 ```bash
-pnpm -C packages/opencode-router test:unit
-pnpm -C packages/opencode-router test:cli
-pnpm -C packages/opencode-router test:npx
+pnpm -C apps/opencode-router test:unit
+pnpm -C apps/opencode-router test:cli
+pnpm -C apps/opencode-router test:npx
 ```

package/bin/opencode-router.mjs

@@ -0,0 +1,43 @@
+#!/usr/bin/env node
+
+import { spawnSync } from "node:child_process";
+import { basename } from "node:path";
+import { existsSync } from "node:fs";
+import { fileURLToPath } from "node:url";
+
+const packageRoot = fileURLToPath(new URL("..", import.meta.url));
+const args = process.argv.slice(2);
+
+const compiledBinaryName = process.platform === "win32" ? "opencode-router.exe" : "opencode-router";
+const compiledBinary = fileURLToPath(new URL(`./dist/bin/${compiledBinaryName}`, `${new URL("../", import.meta.url)}`));
+const builtCli = fileURLToPath(new URL("./dist/cli.js", `${new URL("../", import.meta.url)}`));
+const sourceCli = fileURLToPath(new URL("./src/cli.ts", `${new URL("../", import.meta.url)}`));
+
+function run(command, commandArgs) {
+  const result = spawnSync(command, commandArgs, { stdio: "inherit" });
+  if (result.error) {
+    if (result.error.code === "ENOENT") {
+      console.error(`Missing runtime dependency: ${command}`);
+      process.exit(1);
+    }
+    throw result.error;
+  }
+  process.exit(result.status ?? 1);
+}
+
+if (existsSync(compiledBinary)) {
+  run(compiledBinary, args);
+}
+
+if (existsSync(builtCli)) {
+  run("bun", [builtCli, ...args]);
+}
+
+if (existsSync(sourceCli)) {
+  run("bun", [sourceCli, ...args]);
+}
+
+console.error(
+  `Unable to find an opencode-router entrypoint in ${basename(packageRoot)}. Build the package or run it from a source checkout with Bun available.`,
+);
+process.exit(1);

package/install.sh

@@ -21,7 +21,7 @@ Environment variables:
   OPENCODE_ROUTER_INSTALL_METHOD  Install method: npm|git (default: npm)
 
 Example:
-  OPENCODE_ROUTER_INSTALL_DIR=~/opencode-router curl -fsSL https://raw.githubusercontent.com/different-ai/openwork/dev/packages/opencode-router/install.sh | bash
+  OPENCODE_ROUTER_INSTALL_DIR=~/opencode-router curl -fsSL https://raw.githubusercontent.com/different-ai/openwork/dev/apps/opencode-router/install.sh | bash
 EOF
 }
 
@@ -77,7 +77,7 @@ else
     fi
   fi
 
-  if [[ ! -d "$OPENCODE_ROUTER_INSTALL_DIR/packages/opencode-router" ]]; then
+  if [[ ! -d "$OPENCODE_ROUTER_INSTALL_DIR/apps/opencode-router" ]]; then
     echo "opencode-router package not found on ref '$OPENCODE_ROUTER_REF'. Trying dev/main..." >&2
     git -C "$OPENCODE_ROUTER_INSTALL_DIR" fetch origin --prune
     if git -C "$OPENCODE_ROUTER_INSTALL_DIR" show-ref --verify --quiet refs/remotes/origin/dev; then
@@ -87,7 +87,7 @@ else
     fi
   fi
 
-  if [[ ! -d "$OPENCODE_ROUTER_INSTALL_DIR/packages/opencode-router" ]]; then
+  if [[ ! -d "$OPENCODE_ROUTER_INSTALL_DIR/apps/opencode-router" ]]; then
     echo "opencode-router package not found after checkout. Aborting." >&2
     exit 1
   fi
@@ -96,10 +96,10 @@ else
   pnpm -C "$OPENCODE_ROUTER_INSTALL_DIR" install
 
   echo "Building opencode-router..."
-  pnpm -C "$OPENCODE_ROUTER_INSTALL_DIR/packages/opencode-router" build
+  pnpm -C "$OPENCODE_ROUTER_INSTALL_DIR/apps/opencode-router" build
 
-  ENV_PATH="$OPENCODE_ROUTER_INSTALL_DIR/packages/opencode-router/.env"
-  ENV_EXAMPLE="$OPENCODE_ROUTER_INSTALL_DIR/packages/opencode-router/.env.example"
+  ENV_PATH="$OPENCODE_ROUTER_INSTALL_DIR/apps/opencode-router/.env"
+  ENV_EXAMPLE="$OPENCODE_ROUTER_INSTALL_DIR/apps/opencode-router/.env.example"
   if [[ ! -f "$ENV_PATH" ]]; then
     if [[ -f "$ENV_EXAMPLE" ]]; then
       cp "$ENV_EXAMPLE" "$ENV_PATH"
@@ -120,7 +120,7 @@ EOF
   cat <<EOF > "$OPENCODE_ROUTER_BIN_DIR/opencode-router"
 #!/usr/bin/env bash
 set -euo pipefail
-bun "$OPENCODE_ROUTER_INSTALL_DIR/packages/opencode-router/dist/cli.js" "$@"
+bun "$OPENCODE_ROUTER_INSTALL_DIR/apps/opencode-router/dist/cli.js" "$@"
 EOF
   chmod 755 "$OPENCODE_ROUTER_BIN_DIR/opencode-router"
   CUSTOM_SHIM_CREATED=true

package/package.json

@@ -1,17 +1,17 @@
 {
   "name": "opencode-router",
-  "version": "0.11.170",
+  "version": "0.11.172",
   "description": "opencode-router: Slack + Telegram bridge + directory routing for a running opencode server",
   "private": false,
   "type": "module",
   "bin": {
-    "opencode-router": "dist/cli.js"
+    "opencode-router": "bin/opencode-router.mjs"
   },
   "license": "MIT",
   "repository": {
     "type": "git",
     "url": "git+https://github.com/different-ai/openwork.git",
-    "directory": "packages/opencode-router"
+    "directory": "apps/opencode-router"
   },
   "keywords": [
     "opencode",
@@ -22,6 +22,7 @@
     "bot"
   ],
   "files": [
+    "bin",
     "dist",
     "README.md",
     ".env.example",