openclaw-multi-auto 1.2.7 → 1.2.9

package/node_modules/.pnpm/@whiskeysockets+baileys@7.0.0-rc.9_sharp@0.34.5/node_modules/pino/docs/asynchronous.md

@@ -1,40 +0,0 @@
-# Asynchronous Logging
-
-Asynchronous logging enables the minimum overhead of Pino.
-Asynchronous logging works by buffering log messages and writing them in larger chunks.
-
-```js
-const pino = require('pino')
-const logger = pino(pino.destination({
-  dest: './my-file', // omit for stdout
-  minLength: 4096, // Buffer before writing
-  sync: false // Asynchronous logging
-}))
-```
-
-It's always possible to turn on synchronous logging by passing `sync: true`. 
-In this mode of operation, log messages are directly written to the
-output stream as the messages are generated with a _blocking_ operation.
-
-* See [`pino.destination`](/docs/api.md#pino-destination)
-* `pino.destination` is implemented on [`sonic-boom` ⇗](https://github.com/mcollina/sonic-boom).
-
-### AWS Lambda
-
-Asynchronous logging is disabled by default on AWS Lambda or any other environment
-that modifies `process.stdout`. If forcefully turned on, we recommend calling `dest.flushSync()` at the end
-of each function execution to avoid losing data.
-
-## Caveats
-
-Asynchronous logging has a couple of important caveats:
-
-* As opposed to the synchronous mode, there is not a one-to-one relationship between
-  calls to logging methods (e.g. `logger.info`) and writes to a log file
-* There is a possibility of the most recently buffered log messages being lost
-  in case of a system failure, e.g. a power cut.
-
-See also:
-
-* [`pino.destination` API](/docs/api.md#pino-destination)
-* [`destination` parameter](/docs/api.md#destination)

package/node_modules/.pnpm/@whiskeysockets+baileys@7.0.0-rc.9_sharp@0.34.5/node_modules/pino/docs/benchmarks.md

@@ -1,55 +0,0 @@
-
-# Benchmarks
-
-`pino.info('hello world')`:
-
-```
-
-BASIC benchmark averages
-Bunyan average: 377.434ms
-Winston average: 270.249ms
-Bole average: 172.690ms
-Debug average: 220.527ms
-LogLevel average: 222.802ms
-Pino average: 114.801ms
-PinoMinLength average: 70.968ms
-PinoNodeStream average: 159.192ms
-
-```
-
-`pino.info({'hello': 'world'})`:
-
-```
-
-OBJECT benchmark averages
-BunyanObj average: 410.379ms
-WinstonObj average: 273.120ms
-BoleObj average: 185.069ms
-LogLevelObject average: 433.425ms
-PinoObj average: 119.315ms
-PinoMinLengthObj average: 76.968ms
-PinoNodeStreamObj average: 164.268ms
-
-```
-
-`pino.info(aBigDeeplyNestedObject)`:
-
-```
-
-DEEP-OBJECT benchmark averages
-BunyanDeepObj average: 1.839ms
-WinstonDeepObj average: 5.604ms
-BoleDeepObj average: 3.422ms
-LogLevelDeepObj average: 11.716ms
-PinoDeepObj average: 2.256ms
-PinoMinLengthDeepObj average: 2.240ms
-PinoNodeStreamDeepObj average: 2.595ms
-
-```
-
-`pino.info('hello %s %j %d', 'world', {obj: true}, 4, {another: 'obj'})`:
-
-For a fair comparison, [LogLevel](http://npm.im/loglevel) was extended
-to include a timestamp and [bole](http://npm.im/bole) had
-`fastTime` mode switched on.
-

package/node_modules/.pnpm/@whiskeysockets+baileys@7.0.0-rc.9_sharp@0.34.5/node_modules/pino/docs/browser.md

@@ -1,242 +0,0 @@
-# Browser API
-
-Pino is compatible with [`browserify`](https://npm.im/browserify) for browser-side usage:
-
-This can be useful with isomorphic/universal JavaScript code.
-
-By default, in the browser,
-`pino` uses corresponding [Log4j](https://en.wikipedia.org/wiki/Log4j) `console` methods (`console.error`, `console.warn`, `console.info`, `console.debug`, `console.trace`) and uses `console.error` for any `fatal` level logs.
-
-## Options
-
-Pino can be passed a `browser` object in the options object,
-which can have the following properties:
-
-### `asObject` (Boolean)
-
-```js
-const pino = require('pino')({browser: {asObject: true}})
-```
-
-The `asObject` option will create a pino-like log object instead of
-passing all arguments to a console method, for instance:
-
-```js
-pino.info('hi') // creates and logs {msg: 'hi', level: 30, time: <ts>}
-```
-
-When `write` is set, `asObject` will always be `true`.
-
-### `asObjectBindingsOnly` (Boolean)
-
-```js
-const pino = require('pino')({browser: {asObjectBindingsOnly: true}})
-```
-
-The `asObjectBindingsOnly` option is similar to `asObject` but will keep the message
-and arguments unformatted. This allows to defer formatting the message to the
-actual call to `console` methods, where browsers then have richer formatting in
-their devtools than when pino will format the message to a string first.
-
-```js
-pino.info('hello %s', 'world') // creates and logs {level: 30, time: <ts>}, 'hello %s', 'world'
-```
-
-### `formatters` (Object)
-
-An object containing functions for formatting the shape of the log lines. When provided, it enables the logger to produce a pino-like log object with customized formatting. Currently, it supports formatting for the `level` object only.
-
-##### `level`
-
-Changes the shape of the log level. The default shape is `{ level: number }`.
-The function takes two arguments, the label of the level (e.g. `'info'`)
-and the numeric value (e.g. `30`).
-
-```js
-const formatters = {
-  level (label, number) {
-    return { level: number }
-  }
-}
-```
-
-
-### `write` (Function | Object)
-
-Instead of passing log messages to `console.log` they can be passed to
-a supplied function.
-
-If `write` is set to a single function, all logging objects are passed
-to this function.
-
-```js
-const pino = require('pino')({
-  browser: {
-    write: (o) => {
-      // do something with o
-    }
-  }
-})
-```
-
-If `write` is an object, it can have methods that correspond to the
-levels. When a message is logged at a given level, the corresponding
-method is called. If a method isn't present, the logging falls back
-to using the `console`.
-
-
-```js
-const pino = require('pino')({
-  browser: {
-    write: {
-      info: function (o) {
-        //process info log object
-      },
-      error: function (o) {
-        //process error log object
-      }
-    }
-  }
-})
-```
-
-### `serialize`: (Boolean | Array)
-
-The serializers provided to `pino` are ignored by default in the browser, including
-the standard serializers provided with Pino. Since the default destination for log
-messages is the console, values such as `Error` objects are enhanced for inspection,
-which they otherwise wouldn't be if the Error serializer was enabled.
-
-We can turn all serializers on,
-
-```js
-const pino = require('pino')({
-  browser: {
-    serialize: true
-  }
-})
-```
-
-Or we can selectively enable them via an array:
-
-```js
-const pino = require('pino')({
-  serializers: {
-    custom: myCustomSerializer,
-    another: anotherSerializer
-  },
-  browser: {
-    serialize: ['custom']
-  }
-})
-// following will apply myCustomSerializer to the custom property,
-// but will not apply anotherSerializer to another key
-pino.info({custom: 'a', another: 'b'})
-```
-
-When `serialize` is `true` the standard error serializer is also enabled (see https://github.com/pinojs/pino/blob/master/docs/api.md#stdSerializers).
-This is a global serializer, which will apply to any `Error` objects passed to the logger methods.
-
-If `serialize` is an array the standard error serializer is also automatically enabled, it can
-be explicitly disabled by including a string in the serialize array: `!stdSerializers.err`, like so:
-
-```js
-const pino = require('pino')({
-  serializers: {
-    custom: myCustomSerializer,
-    another: anotherSerializer
-  },
-  browser: {
-    serialize: ['!stdSerializers.err', 'custom'] //will not serialize Errors, will serialize `custom` keys
-  }
-})
-```
-
-The `serialize` array also applies to any child logger serializers (see https://github.com/pinojs/pino/blob/master/docs/api.md#discussion-2
-for how to set child-bound serializers).
-
-Unlike server pino the serializers apply to every object passed to the logger method,
-if the `asObject` option is `true`, this results in the serializers applying to the
-first object (as in server pino).
-
-For more info on serializers see https://github.com/pinojs/pino/blob/master/docs/api.md#mergingobject.
-
-### `transmit` (Object)
-
-An object with `send` and `level` properties.
-
-The `transmit.level` property specifies the minimum level (inclusive) of when the `send` function
-should be called, if not supplied the `send` function be called based on the main logging `level`
-(set via `options.level`, defaulting to `info`).
-
-The `transmit` object must have a `send` function which will be called after
-writing the log message. The `send` function is passed the level of the log
-message and a `logEvent` object.
-
-The `logEvent` object is a data structure representing a log message, it represents
-the arguments passed to a logger statement, the level
-at which they were logged, and the hierarchy of child bindings.
-
-The `logEvent` format is structured like so:
-
-```js
-{
-  ts = Number,
-  messages = Array,
-  bindings = Array,
-  level: { label = String, value = Number}
-}
-```
-
-The `ts` property is a Unix epoch timestamp in milliseconds, the time is taken from the moment the
-logger method is called.
-
-The `messages` array is all arguments passed to logger method, (for instance `logger.info('a', 'b', 'c')`
-would result in `messages` array `['a', 'b', 'c']`).
-
-The `bindings` array represents each child logger (if any), and the relevant bindings.
-For instance, given `logger.child({a: 1}).child({b: 2}).info({c: 3})`, the bindings array
-would hold `[{a: 1}, {b: 2}]` and the `messages` array would be `[{c: 3}]`. The `bindings`
-are ordered according to their position in the child logger hierarchy, with the lowest index
-being the top of the hierarchy.
-
-By default, serializers are not applied to log output in the browser, but they will *always* be
-applied to `messages` and `bindings` in the `logEvent` object. This allows us to ensure a consistent
-format for all values between server and client.
-
-The `level` holds the label (for instance `info`), and the corresponding numerical value
-(for instance `30`). This could be important in cases where client-side level values and
-labels differ from server-side.
-
-The point of the `send` function is to remotely record log messages:
-
-```js
-const pino = require('pino')({
-  browser: {
-    transmit: {
-      level: 'warn',
-      send: function (level, logEvent) {
-        if (level === 'warn') {
-          // maybe send the logEvent to a separate endpoint
-          // or maybe analyze the messages further before sending
-        }
-        // we could also use the `logEvent.level.value` property to determine
-        // numerical value
-        if (logEvent.level.value >= 50) { // covers error and fatal
-
-          // send the logEvent somewhere
-        }
-      }
-    }
-  }
-})
-```
-
-### `disabled` (Boolean)
-
-```js
-const pino = require('pino')({browser: {disabled: true}})
-```
-
-The `disabled` option will disable logging in browser if set
-to `true`, by default it is set to `false`.

package/node_modules/.pnpm/@whiskeysockets+baileys@7.0.0-rc.9_sharp@0.34.5/node_modules/pino/docs/bundling.md

@@ -1,40 +0,0 @@
-# Bundling
-
-Due to its internal architecture based on Worker Threads, it is not possible to bundle Pino *without* generating additional files.
-
-In particular, a bundler must ensure that the following files are also bundled separately:
-
-* `lib/worker.js` from the `thread-stream` dependency
-* `file.js`
-* `lib/worker.js`
-* Any transport used by the user (like `pino-pretty`)
-
-Once the files above have been generated, the bundler must also add information about the files above by injecting a code that sets `__bundlerPathsOverrides` in the `globalThis` object.
-
-The variable is an object whose keys are an identifier for the files and the values are the paths of files relative to the currently bundle files.
-
-Example:
-
-```javascript
-// Inject this using your bundle plugin
-globalThis.__bundlerPathsOverrides = {
-  'thread-stream-worker': pinoWebpackAbsolutePath('./thread-stream-worker.js')
-  'pino/file': pinoWebpackAbsolutePath('./pino-file.js'),
-  'pino-worker': pinoWebpackAbsolutePath('./pino-worker.js'),
-  'pino-pretty': pinoWebpackAbsolutePath('./pino-pretty.js'),
-};
-```
-
-Note that `pino/file`, `pino-worker` and `thread-stream-worker` are required identifiers. Other identifiers are possible based on the user configuration.
-
-## Webpack Plugin
-
-If you are a Webpack user, you can achieve this with [pino-webpack-plugin](https://github.com/pinojs/pino-webpack-plugin) without manual configuration of `__bundlerPathsOverrides`; however, you still need to configure it manually if you are using other bundlers.
-
-## Esbuild Plugin
-
-[esbuild-plugin-pino](https://github.com/davipon/esbuild-plugin-pino) is the esbuild plugin to generate extra pino files for bundling.
-
-## Bun Plugin
-
-[bun-plugin-pino](https://github.com/vktrl/bun-plugin-pino) is the Bun plugin to generate extra pino files for bundling.

package/node_modules/.pnpm/@whiskeysockets+baileys@7.0.0-rc.9_sharp@0.34.5/node_modules/pino/docs/child-loggers.md

@@ -1,95 +0,0 @@
-# Child loggers
-
-Let's assume we want to have `"module":"foo"` added to every log within a
-module `foo.js`.
-
-To accomplish this, simply use a child logger:
-
-```js
-'use strict'
-// imports a pino logger instance of `require('pino')()`
-const parentLogger = require('./lib/logger')
-const log = parentLogger.child({module: 'foo'})
-
-function doSomething () {
-  log.info('doSomething invoked')
-}
-
-module.exports = {
-  doSomething
-}
-```
-
-## Cost of child logging
-
-Child logger creation is fast:
-
-```
-benchBunyanCreation*10000: 564.514ms
-benchBoleCreation*10000: 283.276ms
-benchPinoCreation*10000: 258.745ms
-benchPinoExtremeCreation*10000: 150.506ms
-```
-
-Logging through a child logger has little performance penalty:
-
-```
-benchBunyanChild*10000: 556.275ms
-benchBoleChild*10000: 288.124ms
-benchPinoChild*10000: 231.695ms
-benchPinoExtremeChild*10000: 122.117ms
-```
-
-Logging via the child logger of a child logger also has negligible overhead:
-
-```
-benchBunyanChildChild*10000: 559.082ms
-benchPinoChildChild*10000: 229.264ms
-benchPinoExtremeChildChild*10000: 127.753ms
-```
-
-## Duplicate keys caveat
-
-Naming conflicts can arise between child loggers and
-children of child loggers.
-
-This isn't as bad as it sounds, even if the same keys between
-parent and child loggers are used, Pino resolves the conflict in the sanest way.
-
-For example, consider the following:
-
-```js
-const pino = require('pino')
-pino(pino.destination('./my-log'))
-  .child({a: 'property'})
-  .child({a: 'prop'})
-  .info('howdy')
-```
-
-```sh
-$ cat my-log
-{"pid":95469,"hostname":"MacBook-Pro-3.home","level":30,"msg":"howdy","time":1459534114473,"a":"property","a":"prop"}
-```
-
-Notice how there are two keys named `a` in the JSON output. The sub-child's properties
-appear after the parent child properties.
-
-At some point, the logs will most likely be processed (for instance with a [transport](transports.md)),
-and this generally involves parsing. `JSON.parse` will return an object where the conflicting
-namespace holds the final value assigned to it:
-
-```sh
-$ cat my-log | node -e "process.stdin.once('data', (line) => console.log(JSON.stringify(JSON.parse(line))))"
-{"pid":95469,"hostname":"MacBook-Pro-3.home","level":30,"msg":"howdy","time":"2016-04-01T18:08:34.473Z","a":"prop"}
-```
-
-Ultimately the conflict is resolved by taking the last value, which aligns with Bunyan's child logging
-behavior.
-
-There may be cases where this edge case becomes problematic if a JSON parser with alternative behavior
-is used to process the logs. It's recommended to be conscious of namespace conflicts with child loggers,
-in light of an expected log processing approach.
-
-One of Pino's performance tricks is to avoid building objects and stringifying
-them, so we're building strings instead. This is why duplicate keys between
-parents and children will end up in the log output.

package/node_modules/.pnpm/@whiskeysockets+baileys@7.0.0-rc.9_sharp@0.34.5/node_modules/pino/docs/diagnostics.md

@@ -1,16 +0,0 @@
-# Diagnostics
-
-Pino provides [tracing channel](tc) events that allow insight into the
-internal workings of the library. The currently supported events are:
-
-+ `tracing:pino_asJson:start`: emitted when the final serialization process
-  of logs is started. The emitted event payload has the following fields:
-  - `instance`: the Pino instance associated with the function
-  - `arguments`: the arguments passed to the function
-+ `tracing:pino_asJson:end`: emitted at the end of the final serialization
-  process. The emitted event payload has the following fields:
-  - `instance`: the Pino instance associated with the function
-  - `arguments`: the arguments passed to the function
-  - `result`: the finalized, newline delimited, log line as a string
-
-[tc]: https://nodejs.org/docs/latest/api/diagnostics_channel.html#tracingchannel-channels

package/node_modules/.pnpm/@whiskeysockets+baileys@7.0.0-rc.9_sharp@0.34.5/node_modules/pino/docs/ecosystem.md

@@ -1,86 +0,0 @@
-# Pino Ecosystem
-
-This is a list of ecosystem modules that integrate with `pino`.
-
-Modules listed under [Core](#core) are maintained by the Pino team. Modules
-listed under [Community](#community) are maintained by independent community
-members.
-
-Please send a PR to add new modules!
-
-<a id="core"></a>
-## Core
-
-### Frameworks
-+ [`express-pino-logger`](https://github.com/pinojs/express-pino-logger): use
-Pino to log requests within [express](https://expressjs.com/).
-+ [`koa-pino-logger`](https://github.com/pinojs/koa-pino-logger): use Pino to
-log requests within [Koa](https://koajs.com/).
-+ [`restify-pino-logger`](https://github.com/pinojs/restify-pino-logger): use
-Pino to log requests within [restify](http://restify.com/).
-+ [`rill-pino-logger`](https://github.com/pinojs/rill-pino-logger): use Pino as
-the logger for the [Rill framework](https://rill.site/).
-
-### Utilities
-+ [`pino-arborsculpture`](https://github.com/pinojs/pino-arborsculpture): change
-log levels at runtime.
-+ [`pino-caller`](https://github.com/pinojs/pino-caller): add callsite to the log line.
-+ [`pino-clf`](https://github.com/pinojs/pino-clf): reformat Pino logs into
-Common Log Format.
-+ [`pino-console`](https://github.com/pinojs/pino-console): adapter for the [WHATWG Console](https://console.spec.whatwg.org/) spec. 
-+ [`pino-debug`](https://github.com/pinojs/pino-debug): use Pino to interpret
-[`debug`](https://npm.im/debug) logs.
-+ [`pino-elasticsearch`](https://github.com/pinojs/pino-elasticsearch): send
-Pino logs to an Elasticsearch instance.
-+ [`pino-eventhub`](https://github.com/pinojs/pino-eventhub): send Pino logs
-to an [Event Hub](https://docs.microsoft.com/en-us/azure/event-hubs/event-hubs-what-is-event-hubs).
-+ [`pino-filter`](https://github.com/pinojs/pino-filter): filter Pino logs in
-the same fashion as the [`debug`](https://npm.im/debug) module.
-+ [`pino-gelf`](https://github.com/pinojs/pino-gelf): reformat Pino logs into
-GELF format for Graylog.
-+ [`pino-hapi`](https://github.com/pinojs/hapi-pino): use Pino as the logger
-for [Hapi](https://hapijs.com/).
-+ [`pino-http`](https://github.com/pinojs/pino-http): easily use Pino to log
-requests with the core `http` module.
-+ [`pino-http-print`](https://github.com/pinojs/pino-http-print): reformat Pino
-logs into traditional [HTTPD](https://httpd.apache.org/) style request logs.
-+ [`pino-mongodb`](https://github.com/pinojs/pino-mongodb): store Pino logs
-in a MongoDB database.
-+ [`pino-multi-stream`](https://github.com/pinojs/pino-multi-stream): send
-logs to multiple destination streams (slow!).
-+ [`pino-noir`](https://github.com/pinojs/pino-noir): redact sensitive information
-in logs.
-+ [`pino-pretty`](https://github.com/pinojs/pino-pretty): basic prettifier to
-make log lines human-readable.
-+ [`pino-socket`](https://github.com/pinojs/pino-socket): send logs to TCP or UDP
-destinations.
-+ [`pino-std-serializers`](https://github.com/pinojs/pino-std-serializers): the
-core object serializers used within Pino.
-+ [`pino-syslog`](https://github.com/pinojs/pino-syslog): reformat Pino logs
-to standard syslog format.
-+ [`pino-tee`](https://github.com/pinojs/pino-tee): pipe Pino logs into files
-based upon log levels.
-+ [`pino-test`](https://github.com/pinojs/pino-test): a set of utilities for 
-verifying logs generated by the Pino logger.
-+ [`pino-toke`](https://github.com/pinojs/pino-toke): reformat Pino logs
-according to a given format string.
-
-
-<a id="community"></a>
-## Community
-
-+ [`@google-cloud/pino-logging-gcp-config`](https://www.npmjs.com/package/@google-cloud/pino-logging-gcp-config): Config helper and formatter to output [Google Cloud Platform Structured Logging](https://cloud.google.com/logging/docs/structured-logging)
-+ [`@newrelic/pino-enricher`](https://github.com/newrelic/newrelic-node-log-extensions/blob/main/packages/pino-log-enricher): a log customization to add New Relic context to use [Logs In Context](https://docs.newrelic.com/docs/logs/logs-context/logs-in-context/)
-+ [`cloud-pine`](https://github.com/metcoder95/cloud-pine): transport that provides abstraction and compatibility with [`@google-cloud/logging`](https://www.npmjs.com/package/@google-cloud/logging).
-+ [`cls-proxify`](https://github.com/keenondrums/cls-proxify): integration of pino and [CLS](https://github.com/jeff-lewis/cls-hooked). Useful for creating dynamically configured child loggers (e.g. with added trace ID) for each request.
-+ [`crawlee-pino`](https://github.com/imyelo/crawlee-pino): use Pino to log within Crawlee
-+ [`eslint-plugin-pino`](https://github.com/orzarchi/eslint-plugin-pino): linting rules for pino usage, primarly for preventing missing context in logs due to incorrect argument order.
-+ [`pino-colada`](https://github.com/lrlna/pino-colada): cute ndjson formatter for pino.
-+ [`pino-dev`](https://github.com/dnjstrom/pino-dev): simple prettifier for pino with built-in support for common ecosystem packages.
-+ [`pino-fluentd`](https://github.com/davidedantonio/pino-fluentd): send Pino logs to Elasticsearch,
-MongoDB, and many [others](https://www.fluentd.org/dataoutputs) via Fluentd.
-+ [`pino-lambda`](https://github.com/FormidableLabs/pino-lambda): log transport for cloudwatch support inside aws-lambda 
-+ [`pino-pretty-min`](https://github.com/unjello/pino-pretty-min): a minimal
-prettifier inspired by the [logrus](https://github.com/sirupsen/logrus) logger.
-+ [`pino-rotating-file`](https://github.com/homeaway/pino-rotating-file): a hapi-pino log transport for splitting logs into separate, automatically rotating files.
-+ [`pino-tiny`](https://github.com/holmok/pino-tiny): a tiny (and extensible?) little log formatter for pino.