openatc-components 0.5.6 → 0.5.8

package/src/utils/fault.js

@@ -9,7 +9,19 @@
  * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
  * See the Mulan PSL v2 for more details.
  **/
-import { faultCodeMap } from './faultcode.js'
+// import i18n from '../i18n/index.js'
+import { faultCodeMap,
+  faultCodeMapEn,
+  TZParamSubtypeMap,
+  TZParamSubtypeMapEn,
+  greenLampSubtypeMap,
+  greenLampSubtypeMapEn,
+  lampPowerSubtypeMap,
+  lampPowerSubtypeMapEn,
+  LampGroupSubtypeMap,
+  LampGroupSubtypeMapEn
+} from './faultcode.js'
+
 export function getFaultType (type, i18n) {
   if (type >= 101 && type <= 199) {
     return i18n.t('openatccomponents.faultrecord.maincontrolboardfault')
@@ -24,17 +36,39 @@ export function getFaultType (type, i18n) {
   }
 }
 
-export function getMainFaultType (type, i18n) {
-  if (!i18n) return
-  return i18n.t('openatccomponents.faultCode.' + type)
+export function getMainFaultType (type) {
+  return faultCodeMap.get(type)
+}
+
+export function getMainFaultTypeEn (type) {
+  return faultCodeMapEn.get(type)
 }
 
-export function getAllMainFaultTypeArr (keyfield = 'label', valuefield = 'value', i18n) {
-  const faultCodes = Array.from(faultCodeMap.keys())
-  const typeArr = faultCodes.map(code => ({
-    [keyfield]: code,
-    [valuefield]: i18n.t('openatccomponents.faultCode.' + code)
-  }))
+export function getAllMainFaultTypeArr (keyfield, valuefield, i18n) {
+  let typeArr = []
+  let label = 'label'
+  let val = 'value'
+  if (keyfield && keyfield !== '') {
+    label = keyfield
+  }
+  if (valuefield && valuefield !== '') {
+    val = valuefield
+  }
+  if (i18n.locale === 'en') {
+    for (let [key, value] of faultCodeMapEn.entries()) {
+      typeArr.push({
+        [label]: key,
+        [val]: value
+      })
+    }
+  } else {
+    for (let [key, value] of faultCodeMap) {
+      typeArr.push({
+        [label]: key,
+        [val]: value
+      })
+    }
+  }
   return typeArr
 }
 
@@ -110,16 +144,30 @@ export function formatSubFaultType (dev, i18n) {
   let wFaultType = dev.m_wFaultType
   let wSubFaultType = dev.m_wSubFaultType
   let res = ''
-  if (wFaultType === 601) {
-    res = i18n.t('openatccomponents.tzparamCode.' + wSubFaultType)
-  } else if (wFaultType === 208 || wFaultType === 207 || wFaultType === 206) {
-    res = i18n.t('openatccomponents.greenlampCode.' + wSubFaultType)
-  } else if (wFaultType === 211 || wFaultType === 210 || wFaultType === 209) {
-    res = i18n.t('openatccomponents.powerCode.' + wSubFaultType)
-  } else if (wFaultType === 212) {
-    res = i18n.t('openatccomponents.lampgroupCode.' + wSubFaultType)
+  if (i18n.locale === 'en') {
+    if (wFaultType === 601) {
+      res = TZParamSubtypeMapEn.get(wSubFaultType)
+    } else if (wFaultType === 208 || wFaultType === 207 || wFaultType === 206) {
+      res = greenLampSubtypeMapEn.get(wSubFaultType)
+    } else if (wFaultType === 211 || wFaultType === 210 || wFaultType === 209) {
+      res = lampPowerSubtypeMapEn.get(wSubFaultType)
+    } else if (wFaultType === 212) {
+      res = LampGroupSubtypeMapEn.get(wSubFaultType)
+    } else {
+      res = ''
+    }
   } else {
-    res = ''
+    if (wFaultType === 601) {
+      res = TZParamSubtypeMap.get(wSubFaultType)
+    } else if (wFaultType === 208 || wFaultType === 207 || wFaultType === 206) {
+      res = greenLampSubtypeMap.get(wSubFaultType)
+    } else if (wFaultType === 211 || wFaultType === 210 || wFaultType === 209) {
+      res = lampPowerSubtypeMap.get(wSubFaultType)
+    } else if (wFaultType === 212) {
+      res = LampGroupSubtypeMap.get(wSubFaultType)
+    } else {
+      res = ''
+    }
   }
   return res
 }
@@ -139,6 +187,10 @@ export function formatFaultTypes (dev, i18n) {
   // 故障主类型需要显示具体类型，不要按范围判断
   let faultType = dev.m_wFaultType
   let res = ''
-  res = getMainFaultType(faultType, i18n)
+  if (i18n.locale === 'en') {
+    res = getMainFaultTypeEn(faultType)
+  } else {
+    res = getMainFaultType(faultType)
+  }
   return res
 }

package/src/utils/faultcode.js

@@ -37,137 +37,189 @@ let faultCodeMap = new Map([
   [904, '关灯']
 ])
 
-// let faultCodeMapEn = new Map([
-//   [101, 'CanBus Fault'],
-//   [102, 'Yellow Flasher Fault'],
-//   [103, 'Relay Not Work'],
-//   [201, 'LampBoard ID Fault'],
-//   [202, 'LampBoard Offline'],
-//   [203, 'No Red Lamp Is On'],
-//   [204, 'Red And Green Conflict'],
-//   [205, 'Green Conflict'],
-//   [206, 'Red Lamp Voltage Fault'],
-//   [207, 'Yellow Lamp Voltage Fault'],
-//   [208, 'Green Lamp Voltage Fault'],
-//   [209, 'Red Lamp Lamp Power Fault'],
-//   [210, 'Yellow Lamp Lamp Power Fault'],
-//   [211, 'Green Lamp Lamp Power Fault'],
-//   [212, 'Lamp pack failure'],
-//   [213, 'Car detector failure'],
-//   [214, 'Lamp Control Board Slot Code Error'],
-//   [215, 'Code Error Of Lamp Control Board Plug'],
-//   [216, 'The Number Of Lamp Control Board Not be Configed for The Master'],
-//   [301, 'VehDetBoard Is Not Init'],
-//   [302, 'VehDetBoard Is Offline'],
-//   [303, 'VehDetector Short Circiut'],
-//   [304, 'VehDetector Open  Circiut'],
-//   [401, 'I/O Board Is Not Init'],
-//   [402, 'I/O Board Offline'],
-//   [501, 'Fault Det Board'],
-//   [601, 'Fault TZParam'],
-//   [602, 'Fault HWParam'],
-//   [603, 'System processing exception'],
-//   [604, 'System storage exception'],
-//   [701, 'The front door of the cabinet is open'],
-//   [702, 'The back door of the cabinet is open'],
-//   [901, 'Offline'],
-//   [902, 'Yellow Flash'],
-//   [903, 'All Red'],
-//   [904, 'Dark Control']
-// ])
+let faultCodeMapEn = new Map([
+  [101, 'CanBus Fault'],
+  [102, 'Yellow Flasher Fault'],
+  [103, 'Relay Not Work'],
+  [201, 'LampBoard ID Fault'],
+  [202, 'LampBoard Offline'],
+  [203, 'No Red Lamp Is On'],
+  [204, 'Red And Green Conflict'],
+  [205, 'Green Conflict'],
+  [206, 'Red Lamp Voltage Fault'],
+  [207, 'Yellow Lamp Voltage Fault'],
+  [208, 'Green Lamp Voltage Fault'],
+  [209, 'Red Lamp Lamp Power Fault'],
+  [210, 'Yellow Lamp Lamp Power Fault'],
+  [211, 'Green Lamp Lamp Power Fault'],
+  [212, 'Lamp pack failure'],
+  [213, 'Car detector failure'],
+  [214, 'Lamp Control Board Slot Code Error'],
+  [215, 'Code Error Of Lamp Control Board Plug'],
+  [216, 'The Number Of Lamp Control Board Not be Configed for The Master'],
+  [301, 'VehDetBoard Is Not Init'],
+  [302, 'VehDetBoard Is Offline'],
+  [303, 'VehDetector Short Circiut'],
+  [304, 'VehDetector Open  Circiut'],
+  [401, 'I/O Board Is Not Init'],
+  [402, 'I/O Board Offline'],
+  [501, 'Fault Det Board'],
+  [601, 'Fault TZParam'],
+  [602, 'Fault HWParam'],
+  [603, 'System processing exception'],
+  [604, 'System storage exception'],
+  [701, 'The front door of the cabinet is open'],
+  [702, 'The back door of the cabinet is open'],
+  [901, 'Offline'],
+  [902, 'Yellow Flash'],
+  [903, 'All Red'],
+  [904, 'Dark Control']
+])
 
-// const TZParamSubtypeMap = new Map([
-//   [0, ''],
-//   [1, '特征参数文件不存在'],
-//   [2, '特征参数文件不可读'],
-//   [3, '特征参数人为修改'],
-//   [4, '特征参数文件打开失败'],
-//   [5, '特征参数文件更新失败'],
-//   [6, '信号机地址码校验失败'],
-//   [7, '特征参数内容格式错误'],
-//   [8, 'USB挂载失败'],
-//   [9, 'U盘没找到'],
-//   [10, '设备参数异常']
-// ])
-// const TZParamSubtypeMapEn = new Map([
-//   [0, ''],
-//   [1, 'Non-existent'],
-//   [2, 'File Is Unreadable'],
-//   [3, 'File Artificial Changes'],
-//   [4, 'File Open Fail'],
-//   [5, 'File Update Fail'],
-//   [6, 'File Check SiteID Fail'],
-//   [7, 'Format Error'],
-//   [8, 'USB Mount Fail'],
-//   [9, 'USB Not Find'],
-//   [10, 'HWParam Check Fault']
-// ])
-// const greenLampSubtypeMap = new Map([
-//   [0, ''],
-//   [1, '未输出有效电压'],
-//   [2, '输出电压低于输入电压过多'],
-//   [3, '输出电压高于输入电压'],
-//   [4, '关闭输出但实际电压仍然输出'],
-//   [5, '关闭输出但实际电压部分输出'],
-//   [6, '线路残留电压过高']
-// ])
-// const greenLampSubtypeMapEn = new Map([
-//   [0, ''],
-//   [1, 'Output Volatage Is Fail'],
-//   [2, 'Output Volatage Is Low'],
-//   [3, 'Output Volatage Is High'],
-//   [4, 'Off Output Volatage Is high'],
-//   [5, 'Off Output Volatage Is low'],
-//   [6, 'Residual Voltage Is Over-High']
-// ])
-// const lampPowerSubtypeMap = new Map([
-//   [0, ''],
-//   [1, '功率异常增加'],
-//   [2, '功率异常减少'],
-//   [3, '功率无输出'],
-//   [4, '关闭状态有功率输出']
-// ])
-// const lampPowerSubtypeMapEn = new Map([
-//   [0, ''],
-//   [1, 'Output Power Is Up'],
-//   [2, 'Output Power Is Down'],
-//   [3, 'Output Power Is Zero'],
-//   [4, 'Off Output Power Is High']
-// ])
-// const LampGroupSubtypeMap = new Map([
-//   [0, ''],
-//   [1, '红灯故障'],
-//   [2, '黄灯故障'],
-//   [3, '绿灯故障']
-// ])
-// const LampGroupSubtypeMapEn = new Map([
-//   [0, ''],
-//   [1, 'Red Lamp Fault'],
-//   [2, 'Yellow Lamp Fault'],
-//   [3, 'Green Lamp Fault']
-// ])
-// const faultLevelMap = new Map([
-//   [1, '一般故障'],
-//   [2, '降级故障'],
-//   [3, '严重故障']
-// ])
-// const faultLevelMapEn = new Map([
-//   [1, 'General failure'],
-//   [2, 'Degradation failure'],
-//   [3, 'Serious failure']
-// ])
+const TZParamSubtypeMap = new Map([
+  [0, ''],
+  [1, '特征参数文件不存在'],
+  [2, '特征参数文件不可读'],
+  [3, '特征参数人为修改'],
+  [4, '特征参数文件打开失败'],
+  [5, '特征参数文件更新失败'],
+  [6, '信号机地址码校验失败'],
+  [7, '特征参数内容格式错误'],
+  [8, 'USB挂载失败'],
+  [9, 'U盘没找到'],
+  [10, '设备参数异常']
+])
+const TZParamSubtypeMapEn = new Map([
+  [0, ''],
+  [1, 'Non-existent'],
+  [2, 'File Is Unreadable'],
+  [3, 'File Artificial Changes'],
+  [4, 'File Open Fail'],
+  [5, 'File Update Fail'],
+  [6, 'File Check SiteID Fail'],
+  [7, 'Format Error'],
+  [8, 'USB Mount Fail'],
+  [9, 'USB Not Find'],
+  [10, 'HWParam Check Fault']
+])
+const greenLampSubtypeMap = new Map([
+  [0, ''],
+  [1, '未输出有效电压'],
+  [2, '输出电压低于输入电压过多'],
+  [3, '输出电压高于输入电压'],
+  [4, '关闭输出但实际电压仍然输出'],
+  [5, '关闭输出但实际电压部分输出'],
+  [6, '线路残留电压过高']
+])
+const greenLampSubtypeMapEn = new Map([
+  [0, ''],
+  [1, 'Output Volatage Is Fail'],
+  [2, 'Output Volatage Is Low'],
+  [3, 'Output Volatage Is High'],
+  [4, 'Off Output Volatage Is high'],
+  [5, 'Off Output Volatage Is low'],
+  [6, 'Residual Voltage Is Over-High']
+])
+const lampPowerSubtypeMap = new Map([
+  [0, ''],
+  [1, '功率异常增加'],
+  [2, '功率异常减少'],
+  [3, '功率无输出'],
+  [4, '关闭状态有功率输出']
+])
+const lampPowerSubtypeMapEn = new Map([
+  [0, ''],
+  [1, 'Output Power Is Up'],
+  [2, 'Output Power Is Down'],
+  [3, 'Output Power Is Zero'],
+  [4, 'Off Output Power Is High']
+])
+const LampGroupSubtypeMap = new Map([
+  [0, ''],
+  [1, '红灯故障'],
+  [2, '黄灯故障'],
+  [3, '绿灯故障']
+])
+const LampGroupSubtypeMapEn = new Map([
+  [0, ''],
+  [1, 'Red Lamp Fault'],
+  [2, 'Yellow Lamp Fault'],
+  [3, 'Green Lamp Fault']
+])
+const faultLevelMap = new Map([
+  [1, '一般故障'],
+  [2, '降级故障'],
+  [3, '严重故障']
+])
+const faultLevelMapEn = new Map([
+  [1, 'General failure'],
+  [2, 'Degradation failure'],
+  [3, 'Serious failure']
+])
+
+function getFaultMesEn (codeList) {
+  let faultArr = []
+  for (let data of codeList) {
+    let strArr = []
+    if (data[0] === 103) {
+      strArr[1] = TZParamSubtypeMapEn.get(data[1])
+    } else if (data[0] === 208 || data[0] === 207 || data[0] === 206) {
+      strArr[1] = greenLampSubtypeMapEn.get(data[1])
+    } else if (data[0] === 211 || data[0] === 210 || data[0] === 209) {
+      strArr[1] = lampPowerSubtypeMapEn.get(data[1])
+    } else if (data[0] === 212) {
+      strArr[1] = LampGroupSubtypeMapEn.get(data[1])
+    } else {
+      strArr[1] = ''
+    }
+    strArr[0] = faultCodeMapEn.get(data[0])
+    if (data[1] !== 0) {
+      faultArr.push(`${strArr[0]}--${strArr[1]}`)
+    } else {
+      faultArr.push(`${strArr[0]}`)
+    }
+  }
+  return faultArr
+}
+
+function getFaultMesZh (codeList) {
+  let faultArr = []
+  for (let data of codeList) {
+    let strArr = []
+    if (data[0] === 103) {
+      strArr[1] = TZParamSubtypeMap.get(data[1])
+    } else if (data[0] === 208 || data[0] === 207 || data[0] === 206) {
+      strArr[1] = greenLampSubtypeMap.get(data[1])
+    } else if (data[0] === 211 || data[0] === 210 || data[0] === 209) {
+      strArr[1] = lampPowerSubtypeMap.get(data[1])
+    } else if (data[0] === 212) {
+      strArr[1] = LampGroupSubtypeMap.get(data[1])
+    } else {
+      strArr[1] = ''
+    }
+    strArr[0] = faultCodeMap.get(data[0])
+    if (data[1] !== 0) {
+      faultArr.push(`${strArr[0]}--${strArr[1]}`)
+    } else {
+      faultArr.push(`${strArr[0]}`)
+    }
+  }
+  return faultArr
+}
 
 export {
-  faultCodeMap
-  // faultCodeMapEn,
-  // faultLevelMap,
-  // faultLevelMapEn,
-  // TZParamSubtypeMap,
-  // TZParamSubtypeMapEn,
-  // greenLampSubtypeMap,
-  // greenLampSubtypeMapEn,
-  // lampPowerSubtypeMap,
-  // lampPowerSubtypeMapEn,
-  // LampGroupSubtypeMap,
-  // LampGroupSubtypeMapEn
+  faultCodeMap,
+  faultCodeMapEn,
+  getFaultMesEn,
+  getFaultMesZh,
+  faultLevelMap,
+  faultLevelMapEn,
+  TZParamSubtypeMap,
+  TZParamSubtypeMapEn,
+  greenLampSubtypeMap,
+  greenLampSubtypeMapEn,
+  lampPowerSubtypeMap,
+  lampPowerSubtypeMapEn,
+  LampGroupSubtypeMap,
+  LampGroupSubtypeMapEn
 }

package/src/utils/index.js

@@ -1,69 +1,69 @@
-/**
- * Copyright (c) 2020 kedacom
- * OpenATC is licensed under Mulan PSL v2.
- * You can use this software according to the terms and conditions of the Mulan PSL v2.
- * You may obtain a copy of Mulan PSL v2 at:
- * http://license.coscl.org.cn/MulanPSL2
- * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
- * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
- * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
- * See the Mulan PSL v2 for more details.
- **/
-/**
- * Created by jiachenpan on 16/11/18.
- */
-
-export function parseTime (time, cFormat) {
-  if (arguments.length === 0) {
-    return null
-  }
-  const format = cFormat || '{y}-{m}-{d} {h}:{i}:{s}'
-  let date
-  if (typeof time === 'object') {
-    date = time
-  } else {
-    if (('' + time).length === 10) time = parseInt(time) * 1000
-    date = new Date(time)
-  }
-  const formatObj = {
-    y: date.getFullYear(),
-    m: date.getMonth() + 1,
-    d: date.getDate(),
-    h: date.getHours(),
-    i: date.getMinutes(),
-    s: date.getSeconds(),
-    a: date.getDay()
-  }
-  const time_str = format.replace(/{(y|m|d|h|i|s|a)+}/g, (result, key) => {
-    let value = formatObj[key]
-    if (key === 'a') return ['一', '二', '三', '四', '五', '六', '日'][value - 1]
-    if (result.length > 0 && value < 10) {
-      value = '0' + value
-    }
-    return value || 0
-  })
-  return time_str
-}
-
-export function formatTime (time, option) {
-  time = +time * 1000
-  const d = new Date(time)
-  const now = Date.now()
-
-  const diff = (now - d) / 1000
-
-  if (diff < 30) {
-    return '刚刚'
-  } else if (diff < 3600) { // less 1 hour
-    return Math.ceil(diff / 60) + '分钟前'
-  } else if (diff < 3600 * 24) {
-    return Math.ceil(diff / 3600) + '小时前'
-  } else if (diff < 3600 * 24 * 2) {
-    return '1天前'
-  }
-  if (option) {
-    return parseTime(time, option)
-  } else {
-    return d.getMonth() + 1 + '月' + d.getDate() + '日' + d.getHours() + '时' + d.getMinutes() + '分'
-  }
-}
+/**
+ * Copyright (c) 2020 kedacom
+ * OpenATC is licensed under Mulan PSL v2.
+ * You can use this software according to the terms and conditions of the Mulan PSL v2.
+ * You may obtain a copy of Mulan PSL v2 at:
+ * http://license.coscl.org.cn/MulanPSL2
+ * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
+ * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
+ * See the Mulan PSL v2 for more details.
+ **/
+/**
+ * Created by jiachenpan on 16/11/18.
+ */
+
+export function parseTime (time, cFormat) {
+  if (arguments.length === 0) {
+    return null
+  }
+  const format = cFormat || '{y}-{m}-{d} {h}:{i}:{s}'
+  let date
+  if (typeof time === 'object') {
+    date = time
+  } else {
+    if (('' + time).length === 10) time = parseInt(time) * 1000
+    date = new Date(time)
+  }
+  const formatObj = {
+    y: date.getFullYear(),
+    m: date.getMonth() + 1,
+    d: date.getDate(),
+    h: date.getHours(),
+    i: date.getMinutes(),
+    s: date.getSeconds(),
+    a: date.getDay()
+  }
+  const time_str = format.replace(/{(y|m|d|h|i|s|a)+}/g, (result, key) => {
+    let value = formatObj[key]
+    if (key === 'a') return ['一', '二', '三', '四', '五', '六', '日'][value - 1]
+    if (result.length > 0 && value < 10) {
+      value = '0' + value
+    }
+    return value || 0
+  })
+  return time_str
+}
+
+export function formatTime (time, option) {
+  time = +time * 1000
+  const d = new Date(time)
+  const now = Date.now()
+
+  const diff = (now - d) / 1000
+
+  if (diff < 30) {
+    return '刚刚'
+  } else if (diff < 3600) { // less 1 hour
+    return Math.ceil(diff / 60) + '分钟前'
+  } else if (diff < 3600 * 24) {
+    return Math.ceil(diff / 3600) + '小时前'
+  } else if (diff < 3600 * 24 * 2) {
+    return '1天前'
+  }
+  if (option) {
+    return parseTime(time, option)
+  } else {
+    return d.getMonth() + 1 + '月' + d.getDate() + '日' + d.getHours() + '时' + d.getMinutes() + '分'
+  }
+}