openatc-components 0.4.86 → 0.4.88

package/src/utils/faultcode.js

@@ -1,225 +1,173 @@
-let faultCodeMap = new Map([
-  [101, 'can总线通信故障'],
-  [102, '黄闪器故障'],
-  [103, '继电器未吸合'],
-  [201, '灯控板ID故障'],
-  [202, '灯控板脱机'],
-  [203, '无红灯亮起'],
-  [204, '红绿同亮'],
-  [205, '绿冲突'],
-  [206, '红灯灯电压故障'],
-  [207, '黄灯灯电压故障'],
-  [208, '绿灯灯电压故障'],
-  [209, '红灯灯功率故障'],
-  [210, '黄灯灯功率故障'],
-  [211, '绿灯灯功率故障'],
-  [212, '灯组故障'],
-  [213, '检测器故障'],
-  [214, '灯控板插槽编码错误'],
-  [215, '灯控板插头编码错误'],
-  [216, '本机灯控板数量未配置'],
-  [301, '车检板未初始化'],
-  [302, '车检板脱机'],
-  [303, '车辆检测器短路'],
-  [304, '车辆检测器断路'],
-  [401, 'I/O板未初始化'],
-  [402, 'I/O板脱机'],
-  [501, '故障板脱机'],
-  [601, '特征参数故障'],
-  [602, '设备参数异常'],
-  [603, '系统处理异常'],
-  [604, '系统存储异常'],
-  [701, '机柜前门打开'],
-  [702, '机柜后门打开'],
-  [901, '离线'],
-  [902, '黄闪'],
-  [903, '全红'],
-  [904, '关灯']
-])
-
-let faultCodeMapEn = new Map([
-  [101, 'CanBus Fault'],
-  [102, 'Yellow Flasher Fault'],
-  [103, 'Relay Not Work'],
-  [201, 'LampBoard ID Fault'],
-  [202, 'LampBoard Offline'],
-  [203, 'No Red Lamp Is On'],
-  [204, 'Red And Green Conflict'],
-  [205, 'Green Conflict'],
-  [206, 'Red Lamp Voltage Fault'],
-  [207, 'Yellow Lamp Voltage Fault'],
-  [208, 'Green Lamp Voltage Fault'],
-  [209, 'Red Lamp Lamp Power Fault'],
-  [210, 'Yellow Lamp Lamp Power Fault'],
-  [211, 'Green Lamp Lamp Power Fault'],
-  [212, 'Lamp pack failure'],
-  [213, 'Car detector failure'],
-  [214, 'Lamp Control Board Slot Code Error'],
-  [215, 'Code Error Of Lamp Control Board Plug'],
-  [216, 'The Number Of Lamp Control Board Not be Configed for The Master'],
-  [301, 'VehDetBoard Is Not Init'],
-  [302, 'VehDetBoard Is Offline'],
-  [303, 'VehDetector Short Circiut'],
-  [304, 'VehDetector Open  Circiut'],
-  [401, 'I/O Board Is Not Init'],
-  [402, 'I/O Board Offline'],
-  [501, 'Fault Det Board'],
-  [601, 'Fault TZParam'],
-  [602, 'Fault HWParam'],
-  [603, 'System processing exception'],
-  [604, 'System storage exception'],
-  [701, 'The front door of the cabinet is open'],
-  [702, 'The back door of the cabinet is open'],
-  [901, 'Offline'],
-  [902, 'Yellow Flash'],
-  [903, 'All Red'],
-  [904, 'Dark Control']
-])
-
-const TZParamSubtypeMap = new Map([
-  [0, ''],
-  [1, '特征参数文件不存在'],
-  [2, '特征参数文件不可读'],
-  [3, '特征参数人为修改'],
-  [4, '特征参数文件打开失败'],
-  [5, '特征参数文件更新失败'],
-  [6, '信号机地址码校验失败'],
-  [7, '特征参数内容格式错误'],
-  [8, 'USB挂载失败'],
-  [9, 'U盘没找到'],
-  [10, '设备参数异常']
-])
-const TZParamSubtypeMapEn = new Map([
-  [0, ''],
-  [1, 'Non-existent'],
-  [2, 'File Is Unreadable'],
-  [3, 'File Artificial Changes'],
-  [4, 'File Open Fail'],
-  [5, 'File Update Fail'],
-  [6, 'File Check SiteID Fail'],
-  [7, 'Format Error'],
-  [8, 'USB Mount Fail'],
-  [9, 'USB Not Find'],
-  [10, 'HWParam Check Fault']
-])
-const greenLampSubtypeMap = new Map([
-  [0, ''],
-  [1, '未输出有效电压'],
-  [2, '输出电压低于输入电压过多'],
-  [3, '输出电压高于输入电压'],
-  [4, '关闭输出但实际电压仍然输出'],
-  [5, '关闭输出但实际电压部分输出'],
-  [6, '线路残留电压过高']
-])
-const greenLampSubtypeMapEn = new Map([
-  [0, ''],
-  [1, 'Output Volatage Is Fail'],
-  [2, 'Output Volatage Is Low'],
-  [3, 'Output Volatage Is High'],
-  [4, 'Off Output Volatage Is high'],
-  [5, 'Off Output Volatage Is low'],
-  [6, 'Residual Voltage Is Over-High']
-])
-const lampPowerSubtypeMap = new Map([
-  [0, ''],
-  [1, '功率异常增加'],
-  [2, '功率异常减少'],
-  [3, '功率无输出'],
-  [4, '关闭状态有功率输出']
-])
-const lampPowerSubtypeMapEn = new Map([
-  [0, ''],
-  [1, 'Output Power Is Up'],
-  [2, 'Output Power Is Down'],
-  [3, 'Output Power Is Zero'],
-  [4, 'Off Output Power Is High']
-])
-const LampGroupSubtypeMap = new Map([
-  [0, ''],
-  [1, '红灯故障'],
-  [2, '黄灯故障'],
-  [3, '绿灯故障']
-])
-const LampGroupSubtypeMapEn = new Map([
-  [0, ''],
-  [1, 'Red Lamp Fault'],
-  [2, 'Yellow Lamp Fault'],
-  [3, 'Green Lamp Fault']
-])
-const faultLevelMap = new Map([
-  [1, '一般故障'],
-  [2, '降级故障'],
-  [3, '严重故障']
-])
-const faultLevelMapEn = new Map([
-  [1, 'General failure'],
-  [2, 'Degradation failure'],
-  [3, 'Serious failure']
-])
-
-function getFaultMesEn (codeList) {
-  let faultArr = []
-  for (let data of codeList) {
-    let strArr = []
-    if (data[0] === 103) {
-      strArr[1] = TZParamSubtypeMapEn.get(data[1])
-    } else if (data[0] === 208 || data[0] === 207 || data[0] === 206) {
-      strArr[1] = greenLampSubtypeMapEn.get(data[1])
-    } else if (data[0] === 211 || data[0] === 210 || data[0] === 209) {
-      strArr[1] = lampPowerSubtypeMapEn.get(data[1])
-    } else if (data[0] === 212) {
-      strArr[1] = LampGroupSubtypeMapEn.get(data[1])
-    } else {
-      strArr[1] = ''
-    }
-    strArr[0] = faultCodeMapEn.get(data[0])
-    if (data[1] !== 0) {
-      faultArr.push(`${strArr[0]}--${strArr[1]}`)
-    } else {
-      faultArr.push(`${strArr[0]}`)
-    }
-  }
-  return faultArr
-}
-
-function getFaultMesZh (codeList) {
-  let faultArr = []
-  for (let data of codeList) {
-    let strArr = []
-    if (data[0] === 103) {
-      strArr[1] = TZParamSubtypeMap.get(data[1])
-    } else if (data[0] === 208 || data[0] === 207 || data[0] === 206) {
-      strArr[1] = greenLampSubtypeMap.get(data[1])
-    } else if (data[0] === 211 || data[0] === 210 || data[0] === 209) {
-      strArr[1] = lampPowerSubtypeMap.get(data[1])
-    } else if (data[0] === 212) {
-      strArr[1] = LampGroupSubtypeMap.get(data[1])
-    } else {
-      strArr[1] = ''
-    }
-    strArr[0] = faultCodeMap.get(data[0])
-    if (data[1] !== 0) {
-      faultArr.push(`${strArr[0]}--${strArr[1]}`)
-    } else {
-      faultArr.push(`${strArr[0]}`)
-    }
-  }
-  return faultArr
-}
-
-export {
-  faultCodeMap,
-  faultCodeMapEn,
-  getFaultMesEn,
-  getFaultMesZh,
-  faultLevelMap,
-  faultLevelMapEn,
-  TZParamSubtypeMap,
-  TZParamSubtypeMapEn,
-  greenLampSubtypeMap,
-  greenLampSubtypeMapEn,
-  lampPowerSubtypeMap,
-  lampPowerSubtypeMapEn,
-  LampGroupSubtypeMap,
-  LampGroupSubtypeMapEn
-}
+let faultCodeMap = new Map([
+  [101, 'can总线通信故障'],
+  [102, '黄闪器故障'],
+  [103, '继电器未吸合'],
+  [201, '灯控板ID故障'],
+  [202, '灯控板脱机'],
+  [203, '无红灯亮起'],
+  [204, '红绿同亮'],
+  [205, '绿冲突'],
+  [206, '红灯灯电压故障'],
+  [207, '黄灯灯电压故障'],
+  [208, '绿灯灯电压故障'],
+  [209, '红灯灯功率故障'],
+  [210, '黄灯灯功率故障'],
+  [211, '绿灯灯功率故障'],
+  [212, '灯组故障'],
+  [213, '检测器故障'],
+  [214, '灯控板插槽编码错误'],
+  [215, '灯控板插头编码错误'],
+  [216, '本机灯控板数量未配置'],
+  [301, '车检板未初始化'],
+  [302, '车检板脱机'],
+  [303, '车辆检测器短路'],
+  [304, '车辆检测器断路'],
+  [401, 'I/O板未初始化'],
+  [402, 'I/O板脱机'],
+  [501, '故障板脱机'],
+  [601, '特征参数故障'],
+  [602, '设备参数异常'],
+  [603, '系统处理异常'],
+  [604, '系统存储异常'],
+  [701, '机柜前门打开'],
+  [702, '机柜后门打开'],
+  [901, '离线'],
+  [902, '黄闪'],
+  [903, '全红'],
+  [904, '关灯']
+])
+
+// let faultCodeMapEn = new Map([
+//   [101, 'CanBus Fault'],
+//   [102, 'Yellow Flasher Fault'],
+//   [103, 'Relay Not Work'],
+//   [201, 'LampBoard ID Fault'],
+//   [202, 'LampBoard Offline'],
+//   [203, 'No Red Lamp Is On'],
+//   [204, 'Red And Green Conflict'],
+//   [205, 'Green Conflict'],
+//   [206, 'Red Lamp Voltage Fault'],
+//   [207, 'Yellow Lamp Voltage Fault'],
+//   [208, 'Green Lamp Voltage Fault'],
+//   [209, 'Red Lamp Lamp Power Fault'],
+//   [210, 'Yellow Lamp Lamp Power Fault'],
+//   [211, 'Green Lamp Lamp Power Fault'],
+//   [212, 'Lamp pack failure'],
+//   [213, 'Car detector failure'],
+//   [214, 'Lamp Control Board Slot Code Error'],
+//   [215, 'Code Error Of Lamp Control Board Plug'],
+//   [216, 'The Number Of Lamp Control Board Not be Configed for The Master'],
+//   [301, 'VehDetBoard Is Not Init'],
+//   [302, 'VehDetBoard Is Offline'],
+//   [303, 'VehDetector Short Circiut'],
+//   [304, 'VehDetector Open  Circiut'],
+//   [401, 'I/O Board Is Not Init'],
+//   [402, 'I/O Board Offline'],
+//   [501, 'Fault Det Board'],
+//   [601, 'Fault TZParam'],
+//   [602, 'Fault HWParam'],
+//   [603, 'System processing exception'],
+//   [604, 'System storage exception'],
+//   [701, 'The front door of the cabinet is open'],
+//   [702, 'The back door of the cabinet is open'],
+//   [901, 'Offline'],
+//   [902, 'Yellow Flash'],
+//   [903, 'All Red'],
+//   [904, 'Dark Control']
+// ])
+
+// const TZParamSubtypeMap = new Map([
+//   [0, ''],
+//   [1, '特征参数文件不存在'],
+//   [2, '特征参数文件不可读'],
+//   [3, '特征参数人为修改'],
+//   [4, '特征参数文件打开失败'],
+//   [5, '特征参数文件更新失败'],
+//   [6, '信号机地址码校验失败'],
+//   [7, '特征参数内容格式错误'],
+//   [8, 'USB挂载失败'],
+//   [9, 'U盘没找到'],
+//   [10, '设备参数异常']
+// ])
+// const TZParamSubtypeMapEn = new Map([
+//   [0, ''],
+//   [1, 'Non-existent'],
+//   [2, 'File Is Unreadable'],
+//   [3, 'File Artificial Changes'],
+//   [4, 'File Open Fail'],
+//   [5, 'File Update Fail'],
+//   [6, 'File Check SiteID Fail'],
+//   [7, 'Format Error'],
+//   [8, 'USB Mount Fail'],
+//   [9, 'USB Not Find'],
+//   [10, 'HWParam Check Fault']
+// ])
+// const greenLampSubtypeMap = new Map([
+//   [0, ''],
+//   [1, '未输出有效电压'],
+//   [2, '输出电压低于输入电压过多'],
+//   [3, '输出电压高于输入电压'],
+//   [4, '关闭输出但实际电压仍然输出'],
+//   [5, '关闭输出但实际电压部分输出'],
+//   [6, '线路残留电压过高']
+// ])
+// const greenLampSubtypeMapEn = new Map([
+//   [0, ''],
+//   [1, 'Output Volatage Is Fail'],
+//   [2, 'Output Volatage Is Low'],
+//   [3, 'Output Volatage Is High'],
+//   [4, 'Off Output Volatage Is high'],
+//   [5, 'Off Output Volatage Is low'],
+//   [6, 'Residual Voltage Is Over-High']
+// ])
+// const lampPowerSubtypeMap = new Map([
+//   [0, ''],
+//   [1, '功率异常增加'],
+//   [2, '功率异常减少'],
+//   [3, '功率无输出'],
+//   [4, '关闭状态有功率输出']
+// ])
+// const lampPowerSubtypeMapEn = new Map([
+//   [0, ''],
+//   [1, 'Output Power Is Up'],
+//   [2, 'Output Power Is Down'],
+//   [3, 'Output Power Is Zero'],
+//   [4, 'Off Output Power Is High']
+// ])
+// const LampGroupSubtypeMap = new Map([
+//   [0, ''],
+//   [1, '红灯故障'],
+//   [2, '黄灯故障'],
+//   [3, '绿灯故障']
+// ])
+// const LampGroupSubtypeMapEn = new Map([
+//   [0, ''],
+//   [1, 'Red Lamp Fault'],
+//   [2, 'Yellow Lamp Fault'],
+//   [3, 'Green Lamp Fault']
+// ])
+// const faultLevelMap = new Map([
+//   [1, '一般故障'],
+//   [2, '降级故障'],
+//   [3, '严重故障']
+// ])
+// const faultLevelMapEn = new Map([
+//   [1, 'General failure'],
+//   [2, 'Degradation failure'],
+//   [3, 'Serious failure']
+// ])
+
+export {
+  faultCodeMap
+  // faultCodeMapEn,
+  // faultLevelMap,
+  // faultLevelMapEn,
+  // TZParamSubtypeMap,
+  // TZParamSubtypeMapEn,
+  // greenLampSubtypeMap,
+  // greenLampSubtypeMapEn,
+  // lampPowerSubtypeMap,
+  // lampPowerSubtypeMapEn,
+  // LampGroupSubtypeMap,
+  // LampGroupSubtypeMapEn
+}

package/src/utils/index.js

@@ -1,69 +1,69 @@
-/**
- * Copyright (c) 2020 kedacom
- * OpenATC is licensed under Mulan PSL v2.
- * You can use this software according to the terms and conditions of the Mulan PSL v2.
- * You may obtain a copy of Mulan PSL v2 at:
- * http://license.coscl.org.cn/MulanPSL2
- * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
- * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
- * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
- * See the Mulan PSL v2 for more details.
- **/
-/**
- * Created by jiachenpan on 16/11/18.
- */
-
-export function parseTime (time, cFormat) {
-  if (arguments.length === 0) {
-    return null
-  }
-  const format = cFormat || '{y}-{m}-{d} {h}:{i}:{s}'
-  let date
-  if (typeof time === 'object') {
-    date = time
-  } else {
-    if (('' + time).length === 10) time = parseInt(time) * 1000
-    date = new Date(time)
-  }
-  const formatObj = {
-    y: date.getFullYear(),
-    m: date.getMonth() + 1,
-    d: date.getDate(),
-    h: date.getHours(),
-    i: date.getMinutes(),
-    s: date.getSeconds(),
-    a: date.getDay()
-  }
-  const time_str = format.replace(/{(y|m|d|h|i|s|a)+}/g, (result, key) => {
-    let value = formatObj[key]
-    if (key === 'a') return ['一', '二', '三', '四', '五', '六', '日'][value - 1]
-    if (result.length > 0 && value < 10) {
-      value = '0' + value
-    }
-    return value || 0
-  })
-  return time_str
-}
-
-export function formatTime (time, option) {
-  time = +time * 1000
-  const d = new Date(time)
-  const now = Date.now()
-
-  const diff = (now - d) / 1000
-
-  if (diff < 30) {
-    return '刚刚'
-  } else if (diff < 3600) { // less 1 hour
-    return Math.ceil(diff / 60) + '分钟前'
-  } else if (diff < 3600 * 24) {
-    return Math.ceil(diff / 3600) + '小时前'
-  } else if (diff < 3600 * 24 * 2) {
-    return '1天前'
-  }
-  if (option) {
-    return parseTime(time, option)
-  } else {
-    return d.getMonth() + 1 + '月' + d.getDate() + '日' + d.getHours() + '时' + d.getMinutes() + '分'
-  }
-}
+/**
+ * Copyright (c) 2020 kedacom
+ * OpenATC is licensed under Mulan PSL v2.
+ * You can use this software according to the terms and conditions of the Mulan PSL v2.
+ * You may obtain a copy of Mulan PSL v2 at:
+ * http://license.coscl.org.cn/MulanPSL2
+ * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
+ * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
+ * See the Mulan PSL v2 for more details.
+ **/
+/**
+ * Created by jiachenpan on 16/11/18.
+ */
+
+export function parseTime (time, cFormat) {
+  if (arguments.length === 0) {
+    return null
+  }
+  const format = cFormat || '{y}-{m}-{d} {h}:{i}:{s}'
+  let date
+  if (typeof time === 'object') {
+    date = time
+  } else {
+    if (('' + time).length === 10) time = parseInt(time) * 1000
+    date = new Date(time)
+  }
+  const formatObj = {
+    y: date.getFullYear(),
+    m: date.getMonth() + 1,
+    d: date.getDate(),
+    h: date.getHours(),
+    i: date.getMinutes(),
+    s: date.getSeconds(),
+    a: date.getDay()
+  }
+  const time_str = format.replace(/{(y|m|d|h|i|s|a)+}/g, (result, key) => {
+    let value = formatObj[key]
+    if (key === 'a') return ['一', '二', '三', '四', '五', '六', '日'][value - 1]
+    if (result.length > 0 && value < 10) {
+      value = '0' + value
+    }
+    return value || 0
+  })
+  return time_str
+}
+
+export function formatTime (time, option) {
+  time = +time * 1000
+  const d = new Date(time)
+  const now = Date.now()
+
+  const diff = (now - d) / 1000
+
+  if (diff < 30) {
+    return '刚刚'
+  } else if (diff < 3600) { // less 1 hour
+    return Math.ceil(diff / 60) + '分钟前'
+  } else if (diff < 3600 * 24) {
+    return Math.ceil(diff / 3600) + '小时前'
+  } else if (diff < 3600 * 24 * 2) {
+    return '1天前'
+  }
+  if (option) {
+    return parseTime(time, option)
+  } else {
+    return d.getMonth() + 1 + '月' + d.getDate() + '日' + d.getHours() + '时' + d.getMinutes() + '分'
+  }
+}