openatc-components 0.1.130 → 0.1.131

package/package/kisscomps/components/SchemeConfig/SchemeConfig.vue

@@ -1,817 +1,817 @@
-/**
- * Copyright (c) 2020 kedacom
- * OpenATC is licensed under Mulan PSL v2.
- * You can use this software according to the terms and conditions of the Mulan PSL v2.
- * You may obtain a copy of Mulan PSL v2 at:
- * http://license.coscl.org.cn/MulanPSL2
- * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
- * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
- * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
- * See the Mulan PSL v2 for more details.
- **/
-<template>
-  <div class="scheme-config openatc-scheme-config" style="height: 100%;">
-    <fault-detail-modal ref="faultDetail" :agentId="agentId" @refreshFault="getFaultById"></fault-detail-modal>
-        <div style="height: 100%;">
-          <transition name="fade-right" mode="out-in"
-          :enter-active-class="toPage === 1 ? 'animated fadeInRight' : 'animated fadeInLeft'"
-          :leave-active-class="toPage === 1 ? 'animated fadeOutRight' : 'animated fadeOutLeft' ">
-            <div style="position: absolute;width: 100%;"  v-show="(isOperation && !isClosePhase)">
-             <ManualControlModal
-               :controlData="controlData"
-               :modelList="modelList"
-               :patternSelect="patternSelect"
-               :patternAll="patternAll"
-               :crossStatusData="crossStatusData"
-               :phaseList="phaseList"
-               :specialcontrolList="specialcontrolList"
-               :currModel="currModel"
-               :preselectModel="preselectModel"
-               :preselectStages="preselectStages"
-               :realtimeStatusModalvisible="realtimeStatusModalvisible"
-               :funcSort="funcSort"
-               :roadDirection="roadDirection"
-               @closeManualModal="closeManualModal"
-               @selectModel="selectModel"
-               @selectStages="selectStages"
-               @patternCommit="patternCommit"
-               @selectSpecialModel="selectSpecialModel" />
-            </div>
-          </transition>
-          <transition name="fade-left" mode="out-in"
-          enter-active-class="animated fadeInRight"
-          leave-active-class="animated fadeOutRight">
-            <div style="position: absolute;width: 100%;" v-show="(isOperation && isClosePhase)">
-              <ClosePhaseControlModal
-                v-if="specialPage === 'closephase'"
-                :controlData="controlData"
-                :closePhaseRings="phaseRings"
-                :sidewalkPhaseData="sidewalkPhaseData"
-                :realtimeStatusModalvisible="realtimeStatusModalvisible"
-                :roadDirection="roadDirection"
-                @closePhaseBack="closePhaseBack"
-                @closePhaseControl="closePhaseControl" />
-              <LockingPhaseControlModal
-                v-if="specialPage === 'lockingphase'"
-                :roadDirection="roadDirection"
-                :phaseList="phaseList"
-                :patternStatus="statusData"
-                :lockPhaseBtnName="lockPhaseBtnName"
-                @closePhaseBack="closePhaseBack"
-                @closePhaseControl="closePhaseControl" />
-                <TentativePlanControlModal
-                 v-if="specialPage === 'tentativeplan'"
-                 :realtimeStatusModalvisible="realtimeStatusModalvisible"
-                 :controlData="controlData"
-                 :phaseList="phaseList"
-                 :overlap="overlap"
-                 :patternSelect="patternSelect"
-                 :allPatternList="allPatternList"
-                 @closePhaseBack="closePhaseBack"
-                 @closePhaseControl="closePhaseControl"
-                />
-                <priorityControl
-                v-if="specialPage === 'prioritycontrol'"
-                :realtimeStatusModalvisible="realtimeStatusModalvisible"
-                :phaseList="phaseList"
-                 @closePhaseBack="closePhaseBack"
-                 @closePhaseControl="closePhaseControl"
-                />
-                <AzimuthLocking
-                v-if="specialPage === 'azimuthlocking'"
-                :realtimeStatusModalvisible="realtimeStatusModalvisible"
-                :phaseList="phaseList"
-                :patternStatus="statusData"
-                 @closePhaseBack="closePhaseBack"
-                 @closePhaseControl="closePhaseControl"
-                />
-            </div>
-          </transition>
-
-          <transition name="fade-left" mode="out-in"
-          enter-active-class="animated fadeInLeft"
-          leave-active-class="animated fadeOutLeft">
-            <div class="right-control-part" style="position: absolute;width: 100%;" v-show="!isOperation">
-              <RealtimeStatusModal
-                :controlData="controlData"
-                :currModel="currModel"
-                :ip="ip"
-                :platform="platform"
-                :responseTime="responseTime"
-                :curFaultList="curFaultList"
-                :confirmedFault="confirmedFault"
-                :ignoredFault="ignoredFault"
-                :untreatedFault="untreatedFault"
-                :closePhase="closePhase"
-                :agentName="agentName"
-                :agentId="agentId"
-                :crossStatusData="crossStatusData"
-                :phaseList="phaseList"
-                :sidewalkPhaseData="sidewalkPhaseData"
-                :roadDirection="roadDirection"
-                @changeStatus="changeStatus"
-                @showFaultDetail="showFaultDetail"/>
-            </div>
-          </transition>
-        </div>
-  </div>
-</template>
-
-<script>
-import { putTscControl } from '../../../api/control.js'
-import { uploadSingleTscParam } from '../../../api/param.js'
-import RealtimeStatusModal from './realtimeStatusModal'
-import ManualControlModal from './manualControlModal'
-import ClosePhaseControlModal from './closePhaselControlModal'
-import LockingPhaseControlModal from './lockingPhaselControlModal'
-import TentativePlanControlModal from './tentativeplancontrolmodal'
-import AzimuthLocking from './azimuthlocking'
-import priorityControl from './priorityControl'
-// import { getFaultMesZh, getFaultMesEn } from '../../utils/faultcode.js'
-import { getMessageByCode } from '../../../utils/responseMessage'
-import { GetAllFaultRange } from '../../../api/fault'
-import PhaseDataModel from '../IntersectionMap/crossDirection/utils.js'
-import CrossDiagramMgr from '../../../EdgeMgr/controller/crossDiagramMgr.js'
-import { setToken, setHost } from '../../../utils/auth.js'
-import RingDataModel from '../../../utils/RingDataModel.js'
-import { getIntersectionInfo } from '../../../api/template'
-export default {
-  name: 'scheme-config',
-  components: {
-    RealtimeStatusModal,
-    ManualControlModal,
-    ClosePhaseControlModal,
-    LockingPhaseControlModal,
-    priorityControl,
-    AzimuthLocking,
-    TentativePlanControlModal
-  },
-  props: {
-    phaseList: {
-      type: Array,
-      default: () => []
-    },
-    reqUrl: {
-      type: String,
-      default: ''
-    },
-    responseTime: {
-      type: Number,
-      default: 0
-    },
-    statusData: {
-      type: Object,
-      required: true
-    },
-    agentName: {
-      type: String,
-      default: ''
-    },
-    // devStatus: {
-    //   type: Number,
-    //   default: 0
-    // },
-    agentId: {
-      type: String,
-      default: '0'
-    },
-    ip: {
-      type: String
-    },
-    // allPatternList: {
-    //   type: Array
-    // },
-    // overlap: {
-    //   type: Array
-    // },
-    platform: {
-      type: String
-    },
-    realtimeStatusModalvisible: {
-      type: Boolean,
-      default: true
-    },
-    lockPhaseBtnName: {
-      type: String
-    },
-    Token: {
-      type: String,
-      default: ''
-    },
-    funcSort: {
-      type: String,
-      default: 'allFunc'
-    },
-    roadDirection: {
-      type: String,
-      default: 'right'
-    }
-  },
-  data () {
-    return {
-      crossStatusData: null,
-      controlData: {},
-      control: '',
-      allPatternList: [],
-      overlap: [],
-      sidewalkPhaseData: [],
-      list: [{
-        iconClass: 'model',
-        name: '控制模式',
-        value: '--'
-      }, {
-        iconClass: 'cycle',
-        name: '周期',
-        value: '--'
-      }, {
-        iconClass: 'time',
-        name: '当前时间',
-        value: '--'
-      }, {
-        iconClass: 'maincontrol',
-        name: '控制方式',
-        value: '--'
-      }, {
-        iconClass: 'phasediff',
-        name: '相位差',
-        value: '--'
-      }, {
-        iconClass: 'time',
-        name: '剩余时间',
-        value: '--'
-      }],
-      faultTimer: null, // 当前故障定时器
-      ParamsMode: new Map([[0, '自主控制'], [1, '本地手动'], [2, '平台控制'], [3, '配置软件控制'], [4, '遥控器控制'], [5, '黄闪器控制'], [6, '降级控制'], [7, '脚本控制'], [8, '算法控制']]),
-      ParamsModeEn: new Map([[0, 'Autonomous Control'], [1, 'Local Manual'], [2, 'Platform Control'], [3, 'Configuration Software Control'], [4, 'Remote Control'], [5, 'Yellow Flasher Control'], [6, 'Degradation Control'], [7, 'Script Control'], [8, 'Algorithm Control']]),
-      ParamsControl: new Map([[0, '多时段'], [1, '黄闪'], [2, '全红'], [3, '关灯'], [4, '步进'], [5, '定周期控制'], [6, '单点感应控制'], [7, '协调感应控制'], [8, '方案选择控制'], [9, '自适应控制'], [10, '无电缆控制'], [11, '有电缆控制'], [12, '行人过街控制'], [13, '方案恢复过渡'], [14, '相位驻留'], [15, '通道检测'], [16, '方向锁定'], [17, '韦伯斯特单点控制'], [18, '预留18'], [19, '感应式行人过街'], [20, '方案干预'], [100, '方案干预'], [21, '预留21'], [22, '相位锁定'], [23, '相位放行控制'], [24, '紧急控制'], [99, '设备维护']]),
-      ParamsControlEn: new Map([[0, 'Multi Period'], [1, 'Yellow Flash Control'], [2, 'Red Control'], [3, 'Dark Control'], [4, 'Step'], [5, 'Fixed_Cycle Control'], [6, 'Free Control'], [7, 'Coordinated Induction Control'], [8, 'Pattern Selection Control'], [9, 'Adaptive Control'], [10, 'Wireless Control'], [11, 'Cable Control'], [12, 'Pedestrian Crossing Control'], [13, 'Pattern recovery'], [14, 'Phase dwell'], [15, 'Channel Detection'], [16, 'Direction lock'], [17, 'Webster Single Point Coordination'], [18, 'Reserving18'], [19, 'Inductive Pedestrian Crossing Control'], [20, 'Program Intervention'], [100, 'Program Intervention'], [21, 'Reserving21'], [22, 'Priority Control'], [23, 'Close Phase'], [24, 'Emergency Control'], [99, 'Device Mantenance']]),
-      phaseType: new Map([[1, '红'], [2, '黄'], [3, '绿']]), // phaseType表示红，黄，绿
-      phaseTypeEn: new Map([[1, 'Red'], [2, 'Yellow'], [3, 'Green']]), // phaseType表示红，黄，绿
-      mode: '2',
-      loading: {},
-      modelList: [{
-        id: 1,
-        iconClass: 'huangshan',
-        permission: 'configer:manual:senior',
-        iconName: '黄闪'
-      }, {
-        id: 2,
-        iconClass: 'quanhong',
-        permission: 'configer:manual:senior',
-        iconName: '全红'
-      }, {
-        id: 3,
-        iconClass: 'guandeng',
-        permission: 'configer:manual:senior',
-        iconName: '关灯'
-      }, {
-        id: 4,
-        iconClass: 'bujin',
-        permission: 'configer:manual:dwell',
-        iconName: '步进'
-      }, {
-        id: 5,
-        iconClass: 'dingzhouqi',
-        permission: 'configer:manual:base',
-        iconName: '定周期'
-      }, {
-        id: 6,
-        iconClass: 'ganyingkongzhi',
-        permission: 'configer:manual:base',
-        iconName: '感应控制'
-      }, {
-        id: 9,
-        iconClass: 'zishiying',
-        permission: 'configer:manual:base',
-        iconName: '自适应控制'
-      }, {
-        id: 10,
-        iconClass: 'wuxianlan',
-        permission: 'configer:manual:base',
-        iconName: '无电缆协调'
-      }, {
-        id: 12,
-        iconClass: 'xingrenguojie',
-        permission: 'configer:manual:base',
-        iconName: '行人过街'
-      }, {
-        id: 19,
-        iconClass: 'ganyingshixingrenguojie',
-        permission: 'configer:manual:base',
-        iconName: '感应式行人过街控制'
-      }],
-      currModel: -1,
-      preselectModel: -1, // 预选方案
-      preselectStages: -1, // 预选阶段
-      closePhase: [],
-      isOperation: false, // 是否为手动可操作状态
-      tempPatternid: 0, // 控制方式手动操作的情况下的控制编号的临时值。
-      tempDelay: 0, // 控制方式手动操作的情况下的延迟时间的临时值。
-      tempDuration: 0, // 控制方式手动操作的情况下的持续时间的临时值。
-      // phaseList: [], // 当前相位集合
-      faultvisible: false,
-      isClosePhase: false, // 是否在相位关断
-      toPage: 1, // 与哪一个页面交互，1 代表路口信息页面，3代表 相位关断页面
-      specialcontrolList: [{ // 特殊控制
-        id: 23,
-        permission: 'configer:manual:optimize',
-        iconClass: 'closephase'
-      }, {
-        id: 22,
-        permission: 'configer:manual:optimize',
-        iconClass: 'lockingphase'
-      }, {
-        id: 100,
-        permission: 'configer:manual:optimize',
-        iconClass: 'tentativeplan'
-      }, {
-        id: 24,
-        permission: 'configer:manual:preempt',
-        iconClass: 'prioritycontrol'
-      }, {
-        id: 25,
-        permission: 'configer:manual:optimize',
-        iconClass: 'azimuthlocking'
-      }],
-      phaseRings: [],
-      curFaultList: [],
-      confirmedFault: [],
-      ignoredFault: [],
-      untreatedFault: [],
-      patternAll: [],
-      patternSelect: [], // 所有方案id
-      specialPage: '', // 哪一个特殊控制页面
-      nextcycleefficcontrol: [5, 6, 9, 10, 12, 19] // 下周期生效的控制方式
-    }
-  },
-  watch: {
-    statusData: {
-      handler: function (val) {
-        this.initData()
-        this.getPedPhasePos()
-      },
-      // 深度观察监听
-      deep: true
-    },
-    phaseList: {
-      handler: function (val, oldVal) {
-        this.getPedPhasePos()
-      },
-      // 深度观察监听
-      deep: true
-    },
-    Token: {
-      handler: function (val) {
-        this.setPropsToken(val)
-      }
-    },
-    roadDirection: {
-      handler: function (val) {
-        if (val === 'left' || val === 'right') {
-          this.PhaseDataModel = new PhaseDataModel(val)
-        }
-      }
-    }
-  },
-  created () {
-    this.setHost(this.reqUrl)
-    this.PhaseDataModel = new PhaseDataModel(this.roadDirection)
-    this.CrossDiagramMgr = new CrossDiagramMgr()
-    if (this.realtimeStatusModalvisible === false) {
-      this.changeStatus()
-    }
-    this.getIntersectionInfo(this.agentId)
-  },
-  async mounted () {
-    this.setPropsToken(this.Token)
-    // await this.getPhase()
-    this.getFault()
-    this.initData()
-  },
-  methods: {
-    setHost (host) {
-      // 获取组件外传入的token，便于独立组件调用接口
-      if (host && host !== '') {
-        setHost(host)
-      }
-    },
-    getIntersectionInfo (agentid) {
-      // 获取路口信息
-      getIntersectionInfo(agentid).then(res => {
-        this.patternAll = res.data.data.param.patternList
-        this.allPatternList = res.data.data.param.patternList
-        this.overlap = res.data.data.param.overlaplList
-        this.patternSelect = res.data.data.param.patternList.map(item => {
-          return {
-            value: item.id,
-            label: item.desc ? item.desc : '' + item.id ? item.id : ''
-          }
-        })
-      })
-    },
-    getFault () {
-      this.getFaultById()
-      this.faultTimer = setInterval(() => {
-        this.getFaultById()
-      }, 30000)
-    },
-    getPedPhasePos () {
-      let ringDataModel = new RingDataModel(this.statusData, this.phaseList)
-      this.sidewalkPhaseData = ringDataModel.getPedPhasePos()
-      this.ringDataModel = ringDataModel
-    },
-    clearFaultInterval () {
-      if (this.faultTimer !== null) {
-        clearInterval(this.faultTimer) // 清除流量定时器
-        this.faultTimer = null
-      }
-    },
-    initData () {
-      this.crossStatusData = JSON.parse(JSON.stringify(this.statusData))
-      let TscData = JSON.parse(JSON.stringify(this.crossStatusData))
-      this.currModel = TscData.control
-      this.controlData = this.handleGetData(TscData)
-      this.handleGetPhaseClose()
-    },
-    lockScreen () {
-      this.loading = this.$loading({
-        lock: true,
-        text: 'Loading',
-        spinner: 'el-icon-loading',
-        background: 'rgba(0, 0, 0, 0.5)'
-      })
-    },
-    unlockScreen () {
-      this.loading.close()
-    },
-    selectModel (value) {
-      if (!this.isOperation) return
-      this.preselectStages = -1
-      this.preselectModel = value
-    },
-    selectStages (value) {
-      if (!this.isOperation) return
-      if (this.preselectStages !== -1) {
-        if (this.preselectStages === value) {
-          this.preselectStages = -1
-        } else {
-          this.preselectStages = value
-          this.preselectModel = 4 // 如果选了阶段，默认控制方式为步进
-        }
-      } else {
-        this.preselectStages = value
-        this.preselectModel = 4 // 如果选了阶段，默认控制方式为步进
-      }
-    },
-    changeStatus () {
-      this.toPage = 1
-      this.isOperation = true
-      if (this.modelList.filter(ele => ele.id === 0).length === 0) {
-        let autonomyControl = {
-          id: 0,
-          iconClass: 'zizhukongzhi',
-          permission: 'configer:manual:renew',
-          iconName: '自主控制'
-        }
-        this.modelList.push(autonomyControl)
-      }
-    },
-    handleGetData (data) {
-      let that = this
-      if (data.name === '') {
-        if (that.$i18n.locale === 'en') {
-          data.name = 'Pattern' + data.patternid
-        } else if (that.$i18n.locale === 'zh') {
-          data.name = '方案' + data.patternid
-        }
-      }
-      Object.keys(data).forEach(function (key) {
-        if (that.$i18n.locale === 'en') {
-          if (key === 'mode') {
-            if (that.ParamsModeEn.get(data[key]) !== undefined) {
-              data[key] = that.ParamsModeEn.get(data[key])
-            } else {
-              data[key] = that.ParamsModeEn.get(0)
-            }
-          }
-          if (key === 'control') {
-            data[key] = that.ParamsControlEn.get(data[key])
-          }
-          if (key === 'phase') {
-            for (let val of data[key]) {
-              val.type = that.phaseTypeEn.get(val.type)
-            }
-          }
-        } else if (that.$i18n.locale === 'zh') {
-          if (key === 'mode') {
-            if (that.ParamsMode.get(data[key]) !== undefined) {
-              data[key] = that.ParamsMode.get(data[key])
-            } else {
-              data[key] = that.ParamsMode.get(0)
-            }
-          }
-          if (key === 'control') {
-            data[key] = that.ParamsControl.get(data[key])
-          }
-          if (key === 'phase') {
-            for (let val of data[key]) {
-              val.type = that.phaseType.get(val.type)
-            }
-          }
-        }
-      })
-      return data
-    },
-    closeManualModal () {
-      this.isOperation = false
-      this.preselectModel = -1
-      this.preselectStages = -1
-      this.tempPatternid = 0
-      this.tempDelay = 0
-      this.tempDuration = 0
-      this.modelList = this.modelList.filter((item) => {
-        return item.id !== 0
-      })
-      this.toPage = 1
-    },
-    handleManualConfirm (manualInfo) {
-      this.$emit('handleManualConfirm', manualInfo)
-    },
-    patternCommit (manualInfo) {
-      let that = this
-      let control = {}
-      if (that.preselectModel === -1) {
-        this.$message.error(this.$t('openatccomponents.overview.noselectcontroltip'))
-        return
-      }
-      that.ParamsMode.forEach(function (value, key, map) {
-        if (that.controlData.mode === value) {
-          control.mode = key
-        }
-      })
-      control.control = that.preselectModel
-      // control.terminal = isNaN(parseInt(manualInfo.tempPatternid)) ? Number(manualInfo.tempPatternid.replace(/[^0-9]/ig, '')) : manualInfo.tempPatternid
-      control.terminal = Number(manualInfo.tempPatternid)
-      control.delay = Number(manualInfo.tempDelay)
-      control.duration = Number(manualInfo.tempDuration)
-      control.value = that.preselectStages === -1 ? 0 : that.preselectStages
-      if (control.control === 0) {
-        // 恢复自主控制（多时段）时，value为当前控制方式
-        control.value = this.currModel
-      }
-      if (!this.realtimeStatusModalvisible) {
-        console.log(control)
-        this.$emit('patternCommitCallback', control)
-        return
-      }
-      this.lockScreen()
-      putTscControl(control).then(data => {
-        that.unlockScreen()
-        let success = 0
-        if (!data.data.success) {
-          if (data.data.code === '4002' && data.data.data.errorCode === '4209') {
-            let success = data.data.data.content.success
-            if (success !== 0) {
-              let errormsg = 'openatccomponents.overview.putTscControlError' + success
-              this.$message.error(this.$t(errormsg))
-              return
-            }
-          }
-          that.$message.error(getMessageByCode(data.data.code, that.$i18n.locale))
-          return
-        }
-        if (data.data.data && data.data.data.data) {
-          success = data.data.data.data.success
-          if (success !== 0) {
-            let errormsg = 'openatccomponents.overview.putTscControlError' + success
-            that.$message.error(this.$t(errormsg))
-            return
-          }
-        }
-        // this.closeManualModal()
-        if (this.nextcycleefficcontrol.indexOf(that.currModel) !== -1 && this.nextcycleefficcontrol.indexOf(that.preselectModel) !== -1) {
-          that.$message.success(this.$t('openatccomponents.overview.nextcycleeffic'))
-          return
-        }
-        if (that.preselectModel === 4) {
-          that.$message.success(this.$t('openatccomponents.overview.transitioneffic'))
-          return
-        }
-        if (success === 0) {
-          that.$message.success(this.$t('openatccomponents.common.download'))
-        }
-      }).catch(error => {
-        that.unlockScreen()
-        console.log(error)
-      })
-    },
-    getPhase () {
-      let _this = this
-      return new Promise(function (resolve, reject) {
-        uploadSingleTscParam('phase', _this.agentId).then(data => {
-          let res = data.data
-          if (!res.success) {
-            if (res.code === '4003') {
-              _this.$message.error(_this.$t('openatccomponents.errorTip.devicenotonline'))
-              return
-            }
-            _this.$message.error(getMessageByCode(data.data.code, _this.$i18n.locale))
-            return
-          }
-          _this.phaseList = res.data.data.phaseList
-          resolve()
-        })
-      })
-    },
-    handleFaultsVisible () {
-      this.faultvisible = !this.faultvisible
-    },
-    handleGetPhaseClose () {
-      if (this.crossStatusData.phase) {
-        this.crossStatusData.phase = this.crossStatusData.phase.map(ele => {
-          return {
-            ...ele,
-            close: ele.close || 0,
-            locktype: 0 // 默认所有相位显示解锁状态
-          }
-        })
-        // 相位关断标签
-        let closePhase = []
-        this.crossStatusData.phase.forEach(phase => {
-          if (phase.close !== undefined && phase.close !== 0) {
-            let typename
-            switch (phase.close) {
-              case 1: typename = ''
-                break
-              case 2: typename = this.$t('openatccomponents.overview.vehicle')
-                break
-              case 3: typename = this.$t('openatccomponents.overview.pedestrian')
-                break
-              default:typename = ''
-            }
-            closePhase.push({
-              id: phase.id,
-              typename: typename
-            })
-          }
-        })
-        this.closePhase = JSON.parse(JSON.stringify(closePhase))
-      }
-    },
-    selectSpecialModel (id) {
-      let ringDataModel = new RingDataModel(this.statusData, this.phaseList)
-      if (id === 23) {
-        this.toPage = 3
-        this.isClosePhase = true
-        this.phaseRings = ringDataModel.initRingPhaseData()
-        this.specialPage = 'closephase'
-      } else if (id === 22) {
-        this.toPage = 3
-        this.isClosePhase = true
-        this.phaseRings = ringDataModel.initRingPhaseData()
-        this.specialPage = 'lockingphase'
-      } else if (id === 100) {
-        this.toPage = 3
-        this.isClosePhase = true
-        this.phaseRings = ringDataModel.initRingPhaseData()
-        this.specialPage = 'tentativeplan'
-      } else if (id === 24) {
-        this.toPage = 3
-        this.isClosePhase = true
-        this.phaseRings = ringDataModel.initRingPhaseData()
-        this.specialPage = 'prioritycontrol'
-      } else if (id === 25) {
-        this.toPage = 3
-        this.isClosePhase = true
-        this.phaseRings = ringDataModel.initRingPhaseData()
-        this.specialPage = 'azimuthlocking'
-      } else {
-        this.isClosePhase = false
-        this.specialPage = ''
-      }
-    },
-    closePhaseBack () {
-      // if (!this.realtimeStatusModalvisible) {
-      //   this.$emit('closePhaseBack')
-      //   return
-      // }
-      this.toPage = 3
-      this.isClosePhase = false
-    },
-    closePhaseControl (controldata) {
-      if (!this.realtimeStatusModalvisible) {
-        this.$emit('patternCommitCallback', controldata)
-        return
-      }
-      this.lockScreen()
-      putTscControl(controldata).then(data => {
-        this.unlockScreen()
-        let success = 0
-        if (!data.data.success) {
-          if (data.data.code === '4002' && data.data.data.errorCode === '4209') {
-            let success = data.data.data.content.success
-            if (success !== 0) {
-              let errormsg = 'openatccomponents.overview.putTscControlError' + success
-              this.$message.error(this.$t(errormsg))
-              return
-            }
-          }
-          this.$message.error(getMessageByCode(data.data.code, this.$i18n.locale))
-          return
-        }
-        if (data.data.data && data.data.data.data) {
-          success = data.data.data.data.success
-          if (success !== 0) {
-            let errormsg = 'openatccomponents.overview.putTscControlError' + success
-            this.$message.error(this.$t(errormsg))
-            return
-          }
-        }
-        this.$alert(this.$t('openatccomponents.common.download'), { type: 'success' })
-      }).catch(error => {
-        this.unlockScreen()
-        console.log(error)
-      })
-    },
-    // initRingPhaseData () {
-    //   // 环信息从单独上载相位信息里获取，以免相位锁定后，方案状态数据里没有rings，导致相位锁定控制列表无法显示
-    //   this.phaseRings = []
-    //   let map = {}
-    //   let dest = []
-    //   for (let i = 0; i < this.phaseList.length; i++) {
-    //     let ai = this.phaseList[i]
-    //     if (!map[ai.ring]) {
-    //       let addphse = this.addPhaseInfo(ai)
-    //       dest.push({
-    //         num: ai.ring,
-    //         phases: [{...ai, ...addphse}]
-    //       })
-    //       map[ai.ring] = ai
-    //     } else {
-    //       for (var j = 0; j < dest.length; j++) {
-    //         var dj = dest[j]
-    //         if (dj.num === ai.ring) {
-    //           let addphse = this.addPhaseInfo(ai)
-    //           dj.phases.push({...ai, ...addphse})
-    //           break
-    //         }
-    //       }
-    //     }
-    //   }
-    //   this.phaseRings = JSON.parse(JSON.stringify(dest))
-    // },
-    // addPhaseInfo (phase) {
-    //   let addphse = {}
-    //   addphse.name = this.$t('openatccomponents.overview.phase') + phase.id
-    //   addphse.desc = this.getPhaseDescription(phase.direction)
-    //   // 相位锁定选项默认都按照解锁状态显示
-    //   addphse.locktype = 0
-    //   addphse.close = 0
-    //   if (this.crossStatusData !== null && this.crossStatusData.phase) {
-    //     // 如果方案状态相位有close字段，这边就需要对应close状态进相位关断控制的选项里
-    //     let phaseStatus = this.crossStatusData.phase.filter(ele => ele.id === phase.id)[0]
-    //     addphse = {...addphse, ...phaseStatus}
-    //   }
-    //   return addphse
-    // },
-    // getPhaseDescription (phaseList) {
-    //   let list = []
-    //   for (let id of phaseList) {
-    //     let obj = {}
-    //     obj.id = id
-    //     obj.color = '#454545'
-    //     list.push(obj)
-    //   }
-    //   return list
-    // },
-    getFaultById () {
-      let param = {
-        agentId: this.agentId,
-        isCurrentFault: true
-      }
-      GetAllFaultRange(param).then(res => {
-        if (res.data.success !== true) {
-          this.$message.error(getMessageByCode(res.data.code, this.$i18n.locale))
-          return
-        }
-        this.curFaultList = res.data.data.content
-        this.confirmedFault = this.curFaultList.filter(ele => ele.enumerate === '2')
-        this.ignoredFault = this.curFaultList.filter(ele => ele.enumerate === '1')
-        this.untreatedFault = this.curFaultList.filter(ele => ele.enumerate === '0')
-      })
-    },
-    showFaultDetail () {
-      this.$refs.faultDetail.onViewFaultClick()
-    },
-    setPropsToken (token) {
-      // 获取组件外传入的token，便于独立组件调用接口
-      if (token && token !== '') {
-        setToken(token)
-      }
-    }
-  },
-  destroyed () {
-    this.clearFaultInterval()
-  }
-}
-</script>
+/**
+ * Copyright (c) 2020 kedacom
+ * OpenATC is licensed under Mulan PSL v2.
+ * You can use this software according to the terms and conditions of the Mulan PSL v2.
+ * You may obtain a copy of Mulan PSL v2 at:
+ * http://license.coscl.org.cn/MulanPSL2
+ * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
+ * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
+ * See the Mulan PSL v2 for more details.
+ **/
+<template>
+  <div class="scheme-config openatc-scheme-config" style="height: 100%;">
+    <fault-detail-modal ref="faultDetail" :agentId="agentId" @refreshFault="getFaultById"></fault-detail-modal>
+        <div style="height: 100%;">
+          <transition name="fade-right" mode="out-in"
+          :enter-active-class="toPage === 1 ? 'animated fadeInRight' : 'animated fadeInLeft'"
+          :leave-active-class="toPage === 1 ? 'animated fadeOutRight' : 'animated fadeOutLeft' ">
+            <div style="position: absolute;width: 100%;"  v-show="(isOperation && !isClosePhase)">
+             <ManualControlModal
+               :controlData="controlData"
+               :modelList="modelList"
+               :patternSelect="patternSelect"
+               :patternAll="patternAll"
+               :crossStatusData="crossStatusData"
+               :phaseList="phaseList"
+               :specialcontrolList="specialcontrolList"
+               :currModel="currModel"
+               :preselectModel="preselectModel"
+               :preselectStages="preselectStages"
+               :realtimeStatusModalvisible="realtimeStatusModalvisible"
+               :funcSort="funcSort"
+               :roadDirection="roadDirection"
+               @closeManualModal="closeManualModal"
+               @selectModel="selectModel"
+               @selectStages="selectStages"
+               @patternCommit="patternCommit"
+               @selectSpecialModel="selectSpecialModel" />
+            </div>
+          </transition>
+          <transition name="fade-left" mode="out-in"
+          enter-active-class="animated fadeInRight"
+          leave-active-class="animated fadeOutRight">
+            <div style="position: absolute;width: 100%;" v-show="(isOperation && isClosePhase)">
+              <ClosePhaseControlModal
+                v-if="specialPage === 'closephase'"
+                :controlData="controlData"
+                :closePhaseRings="phaseRings"
+                :sidewalkPhaseData="sidewalkPhaseData"
+                :realtimeStatusModalvisible="realtimeStatusModalvisible"
+                :roadDirection="roadDirection"
+                @closePhaseBack="closePhaseBack"
+                @closePhaseControl="closePhaseControl" />
+              <LockingPhaseControlModal
+                v-if="specialPage === 'lockingphase'"
+                :roadDirection="roadDirection"
+                :phaseList="phaseList"
+                :patternStatus="statusData"
+                :lockPhaseBtnName="lockPhaseBtnName"
+                @closePhaseBack="closePhaseBack"
+                @closePhaseControl="closePhaseControl" />
+                <TentativePlanControlModal
+                 v-if="specialPage === 'tentativeplan'"
+                 :realtimeStatusModalvisible="realtimeStatusModalvisible"
+                 :controlData="controlData"
+                 :phaseList="phaseList"
+                 :overlap="overlap"
+                 :patternSelect="patternSelect"
+                 :allPatternList="allPatternList"
+                 @closePhaseBack="closePhaseBack"
+                 @closePhaseControl="closePhaseControl"
+                />
+                <priorityControl
+                v-if="specialPage === 'prioritycontrol'"
+                :realtimeStatusModalvisible="realtimeStatusModalvisible"
+                :phaseList="phaseList"
+                 @closePhaseBack="closePhaseBack"
+                 @closePhaseControl="closePhaseControl"
+                />
+                <AzimuthLocking
+                v-if="specialPage === 'azimuthlocking'"
+                :realtimeStatusModalvisible="realtimeStatusModalvisible"
+                :phaseList="phaseList"
+                :patternStatus="statusData"
+                 @closePhaseBack="closePhaseBack"
+                 @closePhaseControl="closePhaseControl"
+                />
+            </div>
+          </transition>
+
+          <transition name="fade-left" mode="out-in"
+          enter-active-class="animated fadeInLeft"
+          leave-active-class="animated fadeOutLeft">
+            <div class="right-control-part" style="position: absolute;width: 100%;" v-show="!isOperation">
+              <RealtimeStatusModal
+                :controlData="controlData"
+                :currModel="currModel"
+                :ip="ip"
+                :platform="platform"
+                :responseTime="responseTime"
+                :curFaultList="curFaultList"
+                :confirmedFault="confirmedFault"
+                :ignoredFault="ignoredFault"
+                :untreatedFault="untreatedFault"
+                :closePhase="closePhase"
+                :agentName="agentName"
+                :agentId="agentId"
+                :crossStatusData="crossStatusData"
+                :phaseList="phaseList"
+                :sidewalkPhaseData="sidewalkPhaseData"
+                :roadDirection="roadDirection"
+                @changeStatus="changeStatus"
+                @showFaultDetail="showFaultDetail"/>
+            </div>
+          </transition>
+        </div>
+  </div>
+</template>
+
+<script>
+import { putTscControl } from '../../../api/control.js'
+import { uploadSingleTscParam } from '../../../api/param.js'
+import RealtimeStatusModal from './realtimeStatusModal'
+import ManualControlModal from './manualControlModal'
+import ClosePhaseControlModal from './closePhaselControlModal'
+import LockingPhaseControlModal from './lockingPhaselControlModal'
+import TentativePlanControlModal from './tentativeplancontrolmodal'
+import AzimuthLocking from './azimuthlocking'
+import priorityControl from './priorityControl'
+// import { getFaultMesZh, getFaultMesEn } from '../../utils/faultcode.js'
+import { getMessageByCode } from '../../../utils/responseMessage'
+import { GetAllFaultRange } from '../../../api/fault'
+import PhaseDataModel from '../IntersectionMap/crossDirection/utils.js'
+import CrossDiagramMgr from '../../../EdgeMgr/controller/crossDiagramMgr.js'
+import { setToken, setHost } from '../../../utils/auth.js'
+import RingDataModel from '../../../utils/RingDataModel.js'
+import { getIntersectionInfo } from '../../../api/template'
+export default {
+  name: 'scheme-config',
+  components: {
+    RealtimeStatusModal,
+    ManualControlModal,
+    ClosePhaseControlModal,
+    LockingPhaseControlModal,
+    priorityControl,
+    AzimuthLocking,
+    TentativePlanControlModal
+  },
+  props: {
+    phaseList: {
+      type: Array,
+      default: () => []
+    },
+    reqUrl: {
+      type: String,
+      default: ''
+    },
+    responseTime: {
+      type: Number,
+      default: 0
+    },
+    statusData: {
+      type: Object,
+      required: true
+    },
+    agentName: {
+      type: String,
+      default: ''
+    },
+    // devStatus: {
+    //   type: Number,
+    //   default: 0
+    // },
+    agentId: {
+      type: String,
+      default: '0'
+    },
+    ip: {
+      type: String
+    },
+    // allPatternList: {
+    //   type: Array
+    // },
+    // overlap: {
+    //   type: Array
+    // },
+    platform: {
+      type: String
+    },
+    realtimeStatusModalvisible: {
+      type: Boolean,
+      default: true
+    },
+    lockPhaseBtnName: {
+      type: String
+    },
+    Token: {
+      type: String,
+      default: ''
+    },
+    funcSort: {
+      type: String,
+      default: 'allFunc'
+    },
+    roadDirection: {
+      type: String,
+      default: 'right'
+    }
+  },
+  data () {
+    return {
+      crossStatusData: null,
+      controlData: {},
+      control: '',
+      allPatternList: [],
+      overlap: [],
+      sidewalkPhaseData: [],
+      list: [{
+        iconClass: 'model',
+        name: '控制模式',
+        value: '--'
+      }, {
+        iconClass: 'cycle',
+        name: '周期',
+        value: '--'
+      }, {
+        iconClass: 'time',
+        name: '当前时间',
+        value: '--'
+      }, {
+        iconClass: 'maincontrol',
+        name: '控制方式',
+        value: '--'
+      }, {
+        iconClass: 'phasediff',
+        name: '相位差',
+        value: '--'
+      }, {
+        iconClass: 'time',
+        name: '剩余时间',
+        value: '--'
+      }],
+      faultTimer: null, // 当前故障定时器
+      ParamsMode: new Map([[0, '自主控制'], [1, '本地手动'], [2, '平台控制'], [3, '配置软件控制'], [4, '遥控器控制'], [5, '黄闪器控制'], [6, '降级控制'], [7, '脚本控制'], [8, '算法控制']]),
+      ParamsModeEn: new Map([[0, 'Autonomous Control'], [1, 'Local Manual'], [2, 'Platform Control'], [3, 'Configuration Software Control'], [4, 'Remote Control'], [5, 'Yellow Flasher Control'], [6, 'Degradation Control'], [7, 'Script Control'], [8, 'Algorithm Control']]),
+      ParamsControl: new Map([[0, '多时段'], [1, '黄闪'], [2, '全红'], [3, '关灯'], [4, '步进'], [5, '定周期控制'], [6, '单点感应控制'], [7, '协调感应控制'], [8, '方案选择控制'], [9, '自适应控制'], [10, '无电缆控制'], [11, '有电缆控制'], [12, '行人过街控制'], [13, '方案恢复过渡'], [14, '相位驻留'], [15, '通道检测'], [16, '方向锁定'], [17, '韦伯斯特单点控制'], [18, '预留18'], [19, '感应式行人过街'], [20, '方案干预'], [100, '方案干预'], [21, '预留21'], [22, '相位锁定'], [23, '相位放行控制'], [24, '紧急控制'], [99, '设备维护']]),
+      ParamsControlEn: new Map([[0, 'Multi Period'], [1, 'Yellow Flash Control'], [2, 'Red Control'], [3, 'Dark Control'], [4, 'Step'], [5, 'Fixed_Cycle Control'], [6, 'Free Control'], [7, 'Coordinated Induction Control'], [8, 'Pattern Selection Control'], [9, 'Adaptive Control'], [10, 'Wireless Control'], [11, 'Cable Control'], [12, 'Pedestrian Crossing Control'], [13, 'Pattern recovery'], [14, 'Phase dwell'], [15, 'Channel Detection'], [16, 'Direction lock'], [17, 'Webster Single Point Coordination'], [18, 'Reserving18'], [19, 'Inductive Pedestrian Crossing Control'], [20, 'Program Intervention'], [100, 'Program Intervention'], [21, 'Reserving21'], [22, 'Priority Control'], [23, 'Close Phase'], [24, 'Emergency Control'], [99, 'Device Mantenance']]),
+      phaseType: new Map([[1, '红'], [2, '黄'], [3, '绿']]), // phaseType表示红，黄，绿
+      phaseTypeEn: new Map([[1, 'Red'], [2, 'Yellow'], [3, 'Green']]), // phaseType表示红，黄，绿
+      mode: '2',
+      loading: {},
+      modelList: [{
+        id: 1,
+        iconClass: 'huangshan',
+        permission: 'configer:manual:senior',
+        iconName: '黄闪'
+      }, {
+        id: 2,
+        iconClass: 'quanhong',
+        permission: 'configer:manual:senior',
+        iconName: '全红'
+      }, {
+        id: 3,
+        iconClass: 'guandeng',
+        permission: 'configer:manual:senior',
+        iconName: '关灯'
+      }, {
+        id: 4,
+        iconClass: 'bujin',
+        permission: 'configer:manual:dwell',
+        iconName: '步进'
+      }, {
+        id: 5,
+        iconClass: 'dingzhouqi',
+        permission: 'configer:manual:base',
+        iconName: '定周期'
+      }, {
+        id: 6,
+        iconClass: 'ganyingkongzhi',
+        permission: 'configer:manual:base',
+        iconName: '感应控制'
+      }, {
+        id: 9,
+        iconClass: 'zishiying',
+        permission: 'configer:manual:base',
+        iconName: '自适应控制'
+      }, {
+        id: 10,
+        iconClass: 'wuxianlan',
+        permission: 'configer:manual:base',
+        iconName: '无电缆协调'
+      }, {
+        id: 12,
+        iconClass: 'xingrenguojie',
+        permission: 'configer:manual:base',
+        iconName: '行人过街'
+      }, {
+        id: 19,
+        iconClass: 'ganyingshixingrenguojie',
+        permission: 'configer:manual:base',
+        iconName: '感应式行人过街控制'
+      }],
+      currModel: -1,
+      preselectModel: -1, // 预选方案
+      preselectStages: -1, // 预选阶段
+      closePhase: [],
+      isOperation: false, // 是否为手动可操作状态
+      tempPatternid: 0, // 控制方式手动操作的情况下的控制编号的临时值。
+      tempDelay: 0, // 控制方式手动操作的情况下的延迟时间的临时值。
+      tempDuration: 0, // 控制方式手动操作的情况下的持续时间的临时值。
+      // phaseList: [], // 当前相位集合
+      faultvisible: false,
+      isClosePhase: false, // 是否在相位关断
+      toPage: 1, // 与哪一个页面交互，1 代表路口信息页面，3代表 相位关断页面
+      specialcontrolList: [{ // 特殊控制
+        id: 23,
+        permission: 'configer:manual:optimize',
+        iconClass: 'closephase'
+      }, {
+        id: 22,
+        permission: 'configer:manual:optimize',
+        iconClass: 'lockingphase'
+      }, {
+        id: 100,
+        permission: 'configer:manual:optimize',
+        iconClass: 'tentativeplan'
+      }, {
+        id: 24,
+        permission: 'configer:manual:preempt',
+        iconClass: 'prioritycontrol'
+      }, {
+        id: 25,
+        permission: 'configer:manual:optimize',
+        iconClass: 'azimuthlocking'
+      }],
+      phaseRings: [],
+      curFaultList: [],
+      confirmedFault: [],
+      ignoredFault: [],
+      untreatedFault: [],
+      patternAll: [],
+      patternSelect: [], // 所有方案id
+      specialPage: '', // 哪一个特殊控制页面
+      nextcycleefficcontrol: [5, 6, 9, 10, 12, 19] // 下周期生效的控制方式
+    }
+  },
+  watch: {
+    statusData: {
+      handler: function (val) {
+        this.initData()
+        this.getPedPhasePos()
+      },
+      // 深度观察监听
+      deep: true
+    },
+    phaseList: {
+      handler: function (val, oldVal) {
+        this.getPedPhasePos()
+      },
+      // 深度观察监听
+      deep: true
+    },
+    Token: {
+      handler: function (val) {
+        this.setPropsToken(val)
+      }
+    },
+    roadDirection: {
+      handler: function (val) {
+        if (val === 'left' || val === 'right') {
+          this.PhaseDataModel = new PhaseDataModel(val)
+        }
+      }
+    }
+  },
+  created () {
+    this.setHost(this.reqUrl)
+    this.PhaseDataModel = new PhaseDataModel(this.roadDirection)
+    this.CrossDiagramMgr = new CrossDiagramMgr()
+    if (this.realtimeStatusModalvisible === false) {
+      this.changeStatus()
+    }
+    this.getIntersectionInfo(this.agentId)
+  },
+  async mounted () {
+    this.setPropsToken(this.Token)
+    // await this.getPhase()
+    this.getFault()
+    this.initData()
+  },
+  methods: {
+    setHost (host) {
+      // 获取组件外传入的token，便于独立组件调用接口
+      if (host && host !== '') {
+        setHost(host)
+      }
+    },
+    getIntersectionInfo (agentid) {
+      // 获取路口信息
+      getIntersectionInfo(agentid).then(res => {
+        this.patternAll = res.data.data.param.patternList
+        this.allPatternList = res.data.data.param.patternList
+        this.overlap = res.data.data.param.overlaplList
+        this.patternSelect = res.data.data.param.patternList.map(item => {
+          return {
+            value: item.id,
+            label: item.desc ? item.desc : '' + item.id ? item.id : ''
+          }
+        })
+      })
+    },
+    getFault () {
+      this.getFaultById()
+      this.faultTimer = setInterval(() => {
+        this.getFaultById()
+      }, 30000)
+    },
+    getPedPhasePos () {
+      let ringDataModel = new RingDataModel(this.statusData, this.phaseList)
+      this.sidewalkPhaseData = ringDataModel.getPedPhasePos()
+      this.ringDataModel = ringDataModel
+    },
+    clearFaultInterval () {
+      if (this.faultTimer !== null) {
+        clearInterval(this.faultTimer) // 清除流量定时器
+        this.faultTimer = null
+      }
+    },
+    initData () {
+      this.crossStatusData = JSON.parse(JSON.stringify(this.statusData))
+      let TscData = JSON.parse(JSON.stringify(this.crossStatusData))
+      this.currModel = TscData.control
+      this.controlData = this.handleGetData(TscData)
+      this.handleGetPhaseClose()
+    },
+    lockScreen () {
+      this.loading = this.$loading({
+        lock: true,
+        text: 'Loading',
+        spinner: 'el-icon-loading',
+        background: 'rgba(0, 0, 0, 0.5)'
+      })
+    },
+    unlockScreen () {
+      this.loading.close()
+    },
+    selectModel (value) {
+      if (!this.isOperation) return
+      this.preselectStages = -1
+      this.preselectModel = value
+    },
+    selectStages (value) {
+      if (!this.isOperation) return
+      if (this.preselectStages !== -1) {
+        if (this.preselectStages === value) {
+          this.preselectStages = -1
+        } else {
+          this.preselectStages = value
+          this.preselectModel = 4 // 如果选了阶段，默认控制方式为步进
+        }
+      } else {
+        this.preselectStages = value
+        this.preselectModel = 4 // 如果选了阶段，默认控制方式为步进
+      }
+    },
+    changeStatus () {
+      this.toPage = 1
+      this.isOperation = true
+      if (this.modelList.filter(ele => ele.id === 0).length === 0) {
+        let autonomyControl = {
+          id: 0,
+          iconClass: 'zizhukongzhi',
+          permission: 'configer:manual:renew',
+          iconName: '自主控制'
+        }
+        this.modelList.push(autonomyControl)
+      }
+    },
+    handleGetData (data) {
+      let that = this
+      if (data.name === '') {
+        if (that.$i18n.locale === 'en') {
+          data.name = 'Pattern' + data.patternid
+        } else if (that.$i18n.locale === 'zh') {
+          data.name = '方案' + data.patternid
+        }
+      }
+      Object.keys(data).forEach(function (key) {
+        if (that.$i18n.locale === 'en') {
+          if (key === 'mode') {
+            if (that.ParamsModeEn.get(data[key]) !== undefined) {
+              data[key] = that.ParamsModeEn.get(data[key])
+            } else {
+              data[key] = that.ParamsModeEn.get(0)
+            }
+          }
+          if (key === 'control') {
+            data[key] = that.ParamsControlEn.get(data[key])
+          }
+          if (key === 'phase') {
+            for (let val of data[key]) {
+              val.type = that.phaseTypeEn.get(val.type)
+            }
+          }
+        } else if (that.$i18n.locale === 'zh') {
+          if (key === 'mode') {
+            if (that.ParamsMode.get(data[key]) !== undefined) {
+              data[key] = that.ParamsMode.get(data[key])
+            } else {
+              data[key] = that.ParamsMode.get(0)
+            }
+          }
+          if (key === 'control') {
+            data[key] = that.ParamsControl.get(data[key])
+          }
+          if (key === 'phase') {
+            for (let val of data[key]) {
+              val.type = that.phaseType.get(val.type)
+            }
+          }
+        }
+      })
+      return data
+    },
+    closeManualModal () {
+      this.isOperation = false
+      this.preselectModel = -1
+      this.preselectStages = -1
+      this.tempPatternid = 0
+      this.tempDelay = 0
+      this.tempDuration = 0
+      this.modelList = this.modelList.filter((item) => {
+        return item.id !== 0
+      })
+      this.toPage = 1
+    },
+    handleManualConfirm (manualInfo) {
+      this.$emit('handleManualConfirm', manualInfo)
+    },
+    patternCommit (manualInfo) {
+      let that = this
+      let control = {}
+      if (that.preselectModel === -1) {
+        this.$message.error(this.$t('openatccomponents.overview.noselectcontroltip'))
+        return
+      }
+      that.ParamsMode.forEach(function (value, key, map) {
+        if (that.controlData.mode === value) {
+          control.mode = key
+        }
+      })
+      control.control = that.preselectModel
+      // control.terminal = isNaN(parseInt(manualInfo.tempPatternid)) ? Number(manualInfo.tempPatternid.replace(/[^0-9]/ig, '')) : manualInfo.tempPatternid
+      control.terminal = Number(manualInfo.tempPatternid)
+      control.delay = Number(manualInfo.tempDelay)
+      control.duration = Number(manualInfo.tempDuration)
+      control.value = that.preselectStages === -1 ? 0 : that.preselectStages
+      if (control.control === 0) {
+        // 恢复自主控制（多时段）时，value为当前控制方式
+        control.value = this.currModel
+      }
+      if (!this.realtimeStatusModalvisible) {
+        console.log(control)
+        this.$emit('patternCommitCallback', control)
+        return
+      }
+      this.lockScreen()
+      putTscControl(control).then(data => {
+        that.unlockScreen()
+        let success = 0
+        if (!data.data.success) {
+          if (data.data.code === '4002' && data.data.data.errorCode === '4209') {
+            let success = data.data.data.content.success
+            if (success !== 0) {
+              let errormsg = 'openatccomponents.overview.putTscControlError' + success
+              this.$message.error(this.$t(errormsg))
+              return
+            }
+          }
+          that.$message.error(getMessageByCode(data.data.code, that.$i18n.locale))
+          return
+        }
+        if (data.data.data && data.data.data.data) {
+          success = data.data.data.data.success
+          if (success !== 0) {
+            let errormsg = 'openatccomponents.overview.putTscControlError' + success
+            that.$message.error(this.$t(errormsg))
+            return
+          }
+        }
+        // this.closeManualModal()
+        if (this.nextcycleefficcontrol.indexOf(that.currModel) !== -1 && this.nextcycleefficcontrol.indexOf(that.preselectModel) !== -1) {
+          that.$message.success(this.$t('openatccomponents.overview.nextcycleeffic'))
+          return
+        }
+        if (that.preselectModel === 4) {
+          that.$message.success(this.$t('openatccomponents.overview.transitioneffic'))
+          return
+        }
+        if (success === 0) {
+          that.$message.success(this.$t('openatccomponents.common.download'))
+        }
+      }).catch(error => {
+        that.unlockScreen()
+        console.log(error)
+      })
+    },
+    getPhase () {
+      let _this = this
+      return new Promise(function (resolve, reject) {
+        uploadSingleTscParam('phase', _this.agentId).then(data => {
+          let res = data.data
+          if (!res.success) {
+            if (res.code === '4003') {
+              _this.$message.error(_this.$t('openatccomponents.errorTip.devicenotonline'))
+              return
+            }
+            _this.$message.error(getMessageByCode(data.data.code, _this.$i18n.locale))
+            return
+          }
+          _this.phaseList = res.data.data.phaseList
+          resolve()
+        })
+      })
+    },
+    handleFaultsVisible () {
+      this.faultvisible = !this.faultvisible
+    },
+    handleGetPhaseClose () {
+      if (this.crossStatusData.phase) {
+        this.crossStatusData.phase = this.crossStatusData.phase.map(ele => {
+          return {
+            ...ele,
+            close: ele.close || 0,
+            locktype: 0 // 默认所有相位显示解锁状态
+          }
+        })
+        // 相位关断标签
+        let closePhase = []
+        this.crossStatusData.phase.forEach(phase => {
+          if (phase.close !== undefined && phase.close !== 0) {
+            let typename
+            switch (phase.close) {
+              case 1: typename = ''
+                break
+              case 2: typename = this.$t('openatccomponents.overview.vehicle')
+                break
+              case 3: typename = this.$t('openatccomponents.overview.pedestrian')
+                break
+              default:typename = ''
+            }
+            closePhase.push({
+              id: phase.id,
+              typename: typename
+            })
+          }
+        })
+        this.closePhase = JSON.parse(JSON.stringify(closePhase))
+      }
+    },
+    selectSpecialModel (id) {
+      let ringDataModel = new RingDataModel(this.statusData, this.phaseList)
+      if (id === 23) {
+        this.toPage = 3
+        this.isClosePhase = true
+        this.phaseRings = ringDataModel.initRingPhaseData()
+        this.specialPage = 'closephase'
+      } else if (id === 22) {
+        this.toPage = 3
+        this.isClosePhase = true
+        this.phaseRings = ringDataModel.initRingPhaseData()
+        this.specialPage = 'lockingphase'
+      } else if (id === 100) {
+        this.toPage = 3
+        this.isClosePhase = true
+        this.phaseRings = ringDataModel.initRingPhaseData()
+        this.specialPage = 'tentativeplan'
+      } else if (id === 24) {
+        this.toPage = 3
+        this.isClosePhase = true
+        this.phaseRings = ringDataModel.initRingPhaseData()
+        this.specialPage = 'prioritycontrol'
+      } else if (id === 25) {
+        this.toPage = 3
+        this.isClosePhase = true
+        this.phaseRings = ringDataModel.initRingPhaseData()
+        this.specialPage = 'azimuthlocking'
+      } else {
+        this.isClosePhase = false
+        this.specialPage = ''
+      }
+    },
+    closePhaseBack () {
+      // if (!this.realtimeStatusModalvisible) {
+      //   this.$emit('closePhaseBack')
+      //   return
+      // }
+      this.toPage = 3
+      this.isClosePhase = false
+    },
+    closePhaseControl (controldata) {
+      if (!this.realtimeStatusModalvisible) {
+        this.$emit('patternCommitCallback', controldata)
+        return
+      }
+      this.lockScreen()
+      putTscControl(controldata).then(data => {
+        this.unlockScreen()
+        let success = 0
+        if (!data.data.success) {
+          if (data.data.code === '4002' && data.data.data.errorCode === '4209') {
+            let success = data.data.data.content.success
+            if (success !== 0) {
+              let errormsg = 'openatccomponents.overview.putTscControlError' + success
+              this.$message.error(this.$t(errormsg))
+              return
+            }
+          }
+          this.$message.error(getMessageByCode(data.data.code, this.$i18n.locale))
+          return
+        }
+        if (data.data.data && data.data.data.data) {
+          success = data.data.data.data.success
+          if (success !== 0) {
+            let errormsg = 'openatccomponents.overview.putTscControlError' + success
+            this.$message.error(this.$t(errormsg))
+            return
+          }
+        }
+        this.$alert(this.$t('openatccomponents.common.download'), { type: 'success' })
+      }).catch(error => {
+        this.unlockScreen()
+        console.log(error)
+      })
+    },
+    // initRingPhaseData () {
+    //   // 环信息从单独上载相位信息里获取，以免相位锁定后，方案状态数据里没有rings，导致相位锁定控制列表无法显示
+    //   this.phaseRings = []
+    //   let map = {}
+    //   let dest = []
+    //   for (let i = 0; i < this.phaseList.length; i++) {
+    //     let ai = this.phaseList[i]
+    //     if (!map[ai.ring]) {
+    //       let addphse = this.addPhaseInfo(ai)
+    //       dest.push({
+    //         num: ai.ring,
+    //         phases: [{...ai, ...addphse}]
+    //       })
+    //       map[ai.ring] = ai
+    //     } else {
+    //       for (var j = 0; j < dest.length; j++) {
+    //         var dj = dest[j]
+    //         if (dj.num === ai.ring) {
+    //           let addphse = this.addPhaseInfo(ai)
+    //           dj.phases.push({...ai, ...addphse})
+    //           break
+    //         }
+    //       }
+    //     }
+    //   }
+    //   this.phaseRings = JSON.parse(JSON.stringify(dest))
+    // },
+    // addPhaseInfo (phase) {
+    //   let addphse = {}
+    //   addphse.name = this.$t('openatccomponents.overview.phase') + phase.id
+    //   addphse.desc = this.getPhaseDescription(phase.direction)
+    //   // 相位锁定选项默认都按照解锁状态显示
+    //   addphse.locktype = 0
+    //   addphse.close = 0
+    //   if (this.crossStatusData !== null && this.crossStatusData.phase) {
+    //     // 如果方案状态相位有close字段，这边就需要对应close状态进相位关断控制的选项里
+    //     let phaseStatus = this.crossStatusData.phase.filter(ele => ele.id === phase.id)[0]
+    //     addphse = {...addphse, ...phaseStatus}
+    //   }
+    //   return addphse
+    // },
+    // getPhaseDescription (phaseList) {
+    //   let list = []
+    //   for (let id of phaseList) {
+    //     let obj = {}
+    //     obj.id = id
+    //     obj.color = '#454545'
+    //     list.push(obj)
+    //   }
+    //   return list
+    // },
+    getFaultById () {
+      let param = {
+        agentId: this.agentId,
+        isCurrentFault: true
+      }
+      GetAllFaultRange(param).then(res => {
+        if (res.data.success !== true) {
+          this.$message.error(getMessageByCode(res.data.code, this.$i18n.locale))
+          return
+        }
+        this.curFaultList = res.data.data.content
+        this.confirmedFault = this.curFaultList.filter(ele => ele.enumerate === '2')
+        this.ignoredFault = this.curFaultList.filter(ele => ele.enumerate === '1')
+        this.untreatedFault = this.curFaultList.filter(ele => ele.enumerate === '0')
+      })
+    },
+    showFaultDetail () {
+      this.$refs.faultDetail.onViewFaultClick()
+    },
+    setPropsToken (token) {
+      // 获取组件外传入的token，便于独立组件调用接口
+      if (token && token !== '') {
+        setToken(token)
+      }
+    }
+  },
+  destroyed () {
+    this.clearFaultInterval()
+  }
+}
+</script>