openatc-components 0.0.1 → 0.0.6

package/src/utils/faultcode.js

@@ -0,0 +1,209 @@
+let faultCodeMap = new Map([
+  [101, 'can总线通信故障'],
+  [102, '黄闪器故障'],
+  [103, '继电器未吸合'],
+  [201, '灯控板ID故障'],
+  [202, '灯控板脱机'],
+  [203, '无红灯亮起'],
+  [204, '红绿同亮'],
+  [205, '绿冲突'],
+  [206, '红灯灯电压故障'],
+  [207, '黄灯灯电压故障'],
+  [208, '绿灯灯电压故障'],
+  [209, '红灯灯功率故障'],
+  [210, '黄灯灯功率故障'],
+  [211, '绿灯灯功率故障'],
+  [212, '灯组故障'],
+  [213, '检测器故障'],
+  [214, '灯控板插槽编码错误'],
+  [215, '灯控板插头编码错误'],
+  [216, '本机灯控板数量未配置'],
+  [301, '车检板未初始化'],
+  [302, '车检板脱机'],
+  [303, '车辆检测器短路'],
+  [304, '车辆检测器断路'],
+  [401, 'I/O板未初始化'],
+  [402, 'I/O板脱机'],
+  [501, '故障板脱机'],
+  [601, '特征参数故障'],
+  [602, '设备参数异常']
+])
+
+let faultCodeMapEn = new Map([
+  [101, 'CanBus Fault'],
+  [102, 'Yellow Flasher Fault'],
+  [103, 'Relay Not Work'],
+  [201, 'LampBoard ID Fault'],
+  [202, 'LampBoard Offline'],
+  [203, 'No Red Lamp Is On'],
+  [204, 'Red And Green Conflict'],
+  [205, 'Green Conflict'],
+  [206, 'Red Lamp Voltage Fault'],
+  [207, 'Yellow Lamp Voltage Fault'],
+  [208, 'Green Lamp Voltage Fault'],
+  [209, 'Red Lamp Lamp Power Fault'],
+  [210, 'Yellow Lamp Lamp Power Fault'],
+  [211, 'Green Lamp Lamp Power Fault'],
+  [212, 'Lamp pack failure'],
+  [213, 'Car detector failure'],
+  [214, 'Lamp Control Board Slot Code Error'],
+  [215, 'Code Error Of Lamp Control Board Plug'],
+  [216, 'The Number Of Lamp Control Board Not be Configed for The Master'],
+  [301, 'VehDetBoard Is Not Init'],
+  [302, 'VehDetBoard Is Offline'],
+  [303, 'VehDetector Short Circiut'],
+  [304, 'VehDetector Open  Circiut'],
+  [401, 'I/O Board Is Not Init'],
+  [402, 'I/O Board Offline'],
+  [501, 'Fault Det Board'],
+  [601, 'Fault TZParam'],
+  [602, 'Fault HWParam']
+])
+
+const TZParamSubtypeMap = new Map([
+  [0, ''],
+  [1, '特征参数文件不存在'],
+  [2, '特征参数文件不可读'],
+  [3, '特征参数人为修改'],
+  [4, '特征参数文件打开失败'],
+  [5, '特征参数文件更新失败'],
+  [6, '信号机地址码校验失败'],
+  [7, '特征参数内容格式错误'],
+  [8, 'USB挂载失败'],
+  [9, 'U盘没找到'],
+  [10, '设备参数异常']
+])
+const TZParamSubtypeMapEn = new Map([
+  [0, ''],
+  [1, 'Non-existent'],
+  [2, 'File Is Unreadable'],
+  [3, 'File Artificial Changes'],
+  [4, 'File Open Fail'],
+  [5, 'File Update Fail'],
+  [6, 'File Check SiteID Fail'],
+  [7, 'Format Error'],
+  [8, 'USB Mount Fail'],
+  [9, 'USB Not Find'],
+  [10, 'HWParam Check Fault']
+])
+const greenLampSubtypeMap = new Map([
+  [0, ''],
+  [1, '未输出有效电压'],
+  [2, '输出电压低于输入电压过多'],
+  [3, '输出电压高于输入电压'],
+  [4, '关闭输出但实际电压仍然输出'],
+  [5, '关闭输出但实际电压部分输出'],
+  [6, '线路残留电压过高']
+])
+const greenLampSubtypeMapEn = new Map([
+  [0, ''],
+  [1, 'Output Volatage Is Fail'],
+  [2, 'Output Volatage Is Low'],
+  [3, 'Output Volatage Is High'],
+  [4, 'Off Output Volatage Is high'],
+  [5, 'Off Output Volatage Is low'],
+  [6, 'Residual Voltage Is Over-High']
+])
+const lampPowerSubtypeMap = new Map([
+  [0, ''],
+  [1, '功率异常增加'],
+  [2, '功率异常减少'],
+  [3, '功率无输出'],
+  [4, '关闭状态有功率输出']
+])
+const lampPowerSubtypeMapEn = new Map([
+  [0, ''],
+  [1, 'Output Power Is Up'],
+  [2, 'Output Power Is Down'],
+  [3, 'Output Power Is Zero'],
+  [4, 'Off Output Power Is High']
+])
+const LampGroupSubtypeMap = new Map([
+  [0, ''],
+  [1, '红灯故障'],
+  [2, '黄灯故障'],
+  [3, '绿灯故障']
+])
+const LampGroupSubtypeMapEn = new Map([
+  [0, ''],
+  [1, 'Red Lamp Fault'],
+  [2, 'Yellow Lamp Fault'],
+  [3, 'Green Lamp Fault']
+])
+const faultLevelMap = new Map([
+  [1, '一般故障'],
+  [2, '降级故障'],
+  [3, '严重故障']
+])
+const faultLevelMapEn = new Map([
+  [1, 'General failure'],
+  [2, 'Degradation failure'],
+  [3, 'Serious failure']
+])
+
+function getFaultMesEn (codeList) {
+  let faultArr = []
+  for (let data of codeList) {
+    let strArr = []
+    if (data[0] === 103) {
+      strArr[1] = TZParamSubtypeMapEn.get(data[1])
+    } else if (data[0] === 208 || data[0] === 207 || data[0] === 206) {
+      strArr[1] = greenLampSubtypeMapEn.get(data[1])
+    } else if (data[0] === 211 || data[0] === 210 || data[0] === 209) {
+      strArr[1] = lampPowerSubtypeMapEn.get(data[1])
+    } else if (data[0] === 212) {
+      strArr[1] = LampGroupSubtypeMapEn.get(data[1])
+    } else {
+      strArr[1] = ''
+    }
+    strArr[0] = faultCodeMapEn.get(data[0])
+    if (data[1] !== 0) {
+      faultArr.push(`${strArr[0]}--${strArr[1]}`)
+    } else {
+      faultArr.push(`${strArr[0]}`)
+    }
+  }
+  return faultArr
+}
+
+function getFaultMesZh (codeList) {
+  let faultArr = []
+  for (let data of codeList) {
+    let strArr = []
+    if (data[0] === 103) {
+      strArr[1] = TZParamSubtypeMap.get(data[1])
+    } else if (data[0] === 208 || data[0] === 207 || data[0] === 206) {
+      strArr[1] = greenLampSubtypeMap.get(data[1])
+    } else if (data[0] === 211 || data[0] === 210 || data[0] === 209) {
+      strArr[1] = lampPowerSubtypeMap.get(data[1])
+    } else if (data[0] === 212) {
+      strArr[1] = LampGroupSubtypeMap.get(data[1])
+    } else {
+      strArr[1] = ''
+    }
+    strArr[0] = faultCodeMap.get(data[0])
+    if (data[1] !== 0) {
+      faultArr.push(`${strArr[0]}--${strArr[1]}`)
+    } else {
+      faultArr.push(`${strArr[0]}`)
+    }
+  }
+  return faultArr
+}
+
+export {
+  faultCodeMap,
+  faultCodeMapEn,
+  getFaultMesEn,
+  getFaultMesZh,
+  faultLevelMap,
+  faultLevelMapEn,
+  TZParamSubtypeMap,
+  TZParamSubtypeMapEn,
+  greenLampSubtypeMap,
+  greenLampSubtypeMapEn,
+  lampPowerSubtypeMap,
+  lampPowerSubtypeMapEn,
+  LampGroupSubtypeMap,
+  LampGroupSubtypeMapEn
+}

package/src/utils/index.js

@@ -0,0 +1,69 @@
+/**
+ * Copyright (c) 2020 kedacom
+ * OpenATC is licensed under Mulan PSL v2.
+ * You can use this software according to the terms and conditions of the Mulan PSL v2.
+ * You may obtain a copy of Mulan PSL v2 at:
+ * http://license.coscl.org.cn/MulanPSL2
+ * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
+ * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
+ * See the Mulan PSL v2 for more details.
+ **/
+/**
+ * Created by jiachenpan on 16/11/18.
+ */
+
+export function parseTime (time, cFormat) {
+  if (arguments.length === 0) {
+    return null
+  }
+  const format = cFormat || '{y}-{m}-{d} {h}:{i}:{s}'
+  let date
+  if (typeof time === 'object') {
+    date = time
+  } else {
+    if (('' + time).length === 10) time = parseInt(time) * 1000
+    date = new Date(time)
+  }
+  const formatObj = {
+    y: date.getFullYear(),
+    m: date.getMonth() + 1,
+    d: date.getDate(),
+    h: date.getHours(),
+    i: date.getMinutes(),
+    s: date.getSeconds(),
+    a: date.getDay()
+  }
+  const time_str = format.replace(/{(y|m|d|h|i|s|a)+}/g, (result, key) => {
+    let value = formatObj[key]
+    if (key === 'a') return ['一', '二', '三', '四', '五', '六', '日'][value - 1]
+    if (result.length > 0 && value < 10) {
+      value = '0' + value
+    }
+    return value || 0
+  })
+  return time_str
+}
+
+export function formatTime (time, option) {
+  time = +time * 1000
+  const d = new Date(time)
+  const now = Date.now()
+
+  const diff = (now - d) / 1000
+
+  if (diff < 30) {
+    return '刚刚'
+  } else if (diff < 3600) { // less 1 hour
+    return Math.ceil(diff / 60) + '分钟前'
+  } else if (diff < 3600 * 24) {
+    return Math.ceil(diff / 3600) + '小时前'
+  } else if (diff < 3600 * 24 * 2) {
+    return '1天前'
+  }
+  if (option) {
+    return parseTime(time, option)
+  } else {
+    return d.getMonth() + 1 + '月' + d.getDate() + '日' + d.getHours() + '时' + d.getMinutes() + '分'
+  }
+}

package/src/utils/pedphasedesc.js

@@ -0,0 +1,119 @@
+/**
+ * Copyright (c) 2020 kedacom
+ * OpenATC is licensed under Mulan PSL v2.
+ * You can use this software according to the terms and conditions of the Mulan PSL v2.
+ * You may obtain a copy of Mulan PSL v2 at:
+ * http://license.coscl.org.cn/MulanPSL2
+ * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
+ * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
+ * See the Mulan PSL v2 for more details.
+ **/
+/**
+ * @Description: 根据行人相位的描述id获取对应的描述名字
+ */
+const images = [{
+  id: 1,
+  zname: '东人行横道',
+  ename: 'East-Pedestrian'
+},
+{
+  id: 2,
+  zname: '西人行横道',
+  ename: 'West-Pedestrian'
+},
+{
+  id: 3,
+  zname: '南人行横道',
+  ename: 'South-Pedestrian'
+},
+{
+  id: 4,
+  zname: '北人行横道',
+  ename: 'North-Pedestrian'
+},
+{
+  id: 5,
+  zname: '东人行横道-上',
+  ename: 'East-Top-Pedestrian'
+},
+{
+  id: 6,
+  zname: '东人行横道-下',
+  ename: 'East-Bottom-Pedestrian'
+},
+{
+  id: 7,
+  zname: '西人行横道-上',
+  ename: 'West-Top-Pedestrian'
+},
+{
+  id: 8,
+  zname: '西人行横道-下',
+  ename: 'West-Bottom-Pedestrian'
+},
+{
+  id: 9,
+  zname: '南人行横道-左',
+  ename: 'South-Left-Pedestrian'
+},
+{
+  id: 10,
+  zname: '南人行横道-右',
+  ename: 'South-Right-Pedestrian'
+},
+{
+  id: 11,
+  zname: '北人行横道-左',
+  ename: 'North-Left-Pedestrian'
+},
+{
+  id: 12,
+  zname: '北人行横道-右',
+  ename: 'North-Right-Pedestrian'
+},
+{
+  id: 13,
+  zname: 'X人行横道-/',
+  ename: 'X-/-Pedestrian'
+},
+{
+  id: 14,
+  zname: 'X人行横道-\\',
+  ename: 'X-\\-Pedestrian'
+},
+{
+  id: 15,
+  zname: '东西路段人行横道',
+  ename: 'East-West-Pedestrian'
+},
+{
+  id: 16,
+  zname: '南北路段人行横道',
+  ename: 'South-North-Pedestrian'
+}]
+
+export function getPedPhaseDesc (list, language) {
+  let str = ''
+  if (language === 'en') {
+    for (let ll of list) {
+      for (let image of images) {
+        if (image.id === ll) {
+          str = str + ',' + image.ename
+        }
+      }
+    }
+  } else {
+    for (let ll of list) {
+      for (let image of images) {
+        if (image.id === ll) {
+          str = str + ',' + image.zname
+        }
+      }
+    }
+  }
+  if (str !== '') {
+    str = str.substr(1)
+  }
+  return str
+}

package/src/utils/phasedesc.js

@@ -0,0 +1,124 @@
+/**
+ * Copyright (c) 2020 kedacom
+ * OpenATC is licensed under Mulan PSL v2.
+ * You can use this software according to the terms and conditions of the Mulan PSL v2.
+ * You may obtain a copy of Mulan PSL v2 at:
+ * http://license.coscl.org.cn/MulanPSL2
+ * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
+ * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
+ * See the Mulan PSL v2 for more details.
+ **/
+/**
+ * @Description: 根据相位的描述id获取对应的描述名字
+ * @Author: yangdongyang
+ * @Date: Create in 13:41 2019/3/26
+ * @Modified By:
+ */
+const images = [{
+  id: 1,
+  zname: '东直行',
+  ename: 'East-Straight'
+},
+{
+  id: 2,
+  zname: '东左转',
+  ename: 'East-Left'
+},
+{
+  id: 3,
+  zname: '东右转',
+  ename: 'East-Right'
+},
+{
+  id: 4,
+  zname: '东掉头',
+  ename: 'East-Back'
+},
+{
+  id: 5,
+  zname: '西直行',
+  ename: 'West-Straight'
+},
+{
+  id: 6,
+  zname: '西左转',
+  ename: 'West-Left'
+},
+{
+  id: 7,
+  zname: '西右转',
+  ename: 'West-Right'
+},
+{
+  id: 8,
+  zname: '西掉头',
+  ename: 'West-Back'
+},
+{
+  id: 9,
+  zname: '北直行',
+  ename: 'North-Straight'
+},
+{
+  id: 10,
+  zname: '北左转',
+  ename: 'North-Left'
+},
+{
+  id: 11,
+  zname: '北右转',
+  ename: 'North-Right'
+},
+{
+  id: 12,
+  zname: '北掉头',
+  ename: 'North-Back'
+},
+{
+  id: 13,
+  zname: '南直行',
+  ename: 'South-Straight'
+},
+{
+  id: 14,
+  zname: '南左转',
+  ename: 'South-Left'
+},
+{
+  id: 15,
+  zname: '南右转',
+  ename: 'South-Right'
+},
+{
+  id: 16,
+  zname: '南掉头',
+  ename: 'South-Back'
+}]
+
+export function getPhaseDesc (list, language) {
+  // let language = this.$i18n.locale
+  // console.log(language)
+  let str = ''
+  if (language === 'en') {
+    for (let ll of list) {
+      for (let image of images) {
+        if (image.id === ll) {
+          str = str + ',' + image.ename
+        }
+      }
+    }
+  } else {
+    for (let ll of list) {
+      for (let image of images) {
+        if (image.id === ll) {
+          str = str + ',' + image.zname
+        }
+      }
+    }
+  }
+  if (str !== '') {
+    str = str.substr(1)
+  }
+  return str
+}

package/src/utils/responseMessage.js

@@ -0,0 +1,21 @@
+import i18n from '../i18n/index'
+import en from '../i18n/language/en'
+import zh from '../i18n/language/zh'
+
+function getMessageByCode (code, langusge) {
+  let res = i18n.t('openatccomponents.message.errorcode') + ' ' + code
+  let message = zh.openatccomponents.message
+  if (code && langusge) {
+    if (langusge === 'en') {
+      message = en.openatccomponents.message
+    }
+    if (message[code]) {
+      res = message[code]
+    }
+  }
+  return res
+}
+
+export {
+  getMessageByCode
+}

package/src/utils/validate.js

@@ -0,0 +1,43 @@
+/**
+ * Copyright (c) 2020 kedacom
+ * OpenATC is licensed under Mulan PSL v2.
+ * You can use this software according to the terms and conditions of the Mulan PSL v2.
+ * You may obtain a copy of Mulan PSL v2 at:
+ * http://license.coscl.org.cn/MulanPSL2
+ * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
+ * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
+ * See the Mulan PSL v2 for more details.
+ **/
+/**
+ * Created by jiachenpan on 16/11/18.
+ */
+
+export function isvalidUsername (str) {
+  const valid_map = ['admin', 'editor']
+  return valid_map.indexOf(str.trim()) >= 0
+}
+
+/* 合法uri */
+export function validateURL (textval) {
+  const urlregex = /^(https?|ftp):\/\/([a-zA-Z0-9.-]+(:[a-zA-Z0-9.&%$-]+)*@)*((25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9][0-9]?)(\.(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])){3}|([a-zA-Z0-9-]+\.)*[a-zA-Z0-9-]+\.(com|edu|gov|int|mil|net|org|biz|arpa|info|name|pro|aero|coop|museum|[a-zA-Z]{2}))(:[0-9]+)*(\/($|[a-zA-Z0-9.,?'\\+&%$#=~_-]+))*$/
+  return urlregex.test(textval)
+}
+
+/* 小写字母 */
+export function validateLowerCase (str) {
+  const reg = /^[a-z]+$/
+  return reg.test(str)
+}
+
+/* 大写字母 */
+export function validateUpperCase (str) {
+  const reg = /^[A-Z]+$/
+  return reg.test(str)
+}
+
+/* 大小写字母 */
+export function validatAlphabets (str) {
+  const reg = /^[A-Za-z]+$/
+  return reg.test(str)
+}