omo-ai 5.1.14 → 5.1.16

package/bin/lib/provider-map.json

@@ -1,5 +1,5 @@
 {
-  "_comment": "Derived from @code-yeongyu/senpi 2026.10.5 builtinProviders(). builtinProviderIds and oauthProviderIds are the engine registry verbatim; providers maps a source harness id onto the omo provider that serves the same endpoint; oauthLogins maps a source OAuth id onto the omo provider to run /login for. Re-derive all four whenever the senpi pin changes.",
+  "_comment": "Derived from @code-yeongyu/senpi 2026.10.7 builtinProviders(). builtinProviderIds and oauthProviderIds are the engine registry verbatim; providers maps a source harness id onto the omo provider that serves the same endpoint; oauthLogins maps a source OAuth id onto the omo provider to run /login for. Re-derive all four whenever the senpi pin changes.",
   "builtinProviderIds": [
     "alibaba-token-plan",
     "amazon-bedrock",

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "omo-ai",
-  "version": "5.1.14",
+  "version": "5.1.16",
   "type": "module",
   "description": "OmO Native - the standalone omo command with the OMO extension built in: bun add -g omo-ai",
   "bin": {
@@ -17,7 +17,7 @@
     "postinstall": "node bin/senpi-patch.mjs"
   },
   "dependencies": {
-    "@code-yeongyu/senpi": "2026.10.5"
+    "@code-yeongyu/senpi": "2026.10.7"
   },
   "repository": {
     "type": "git",

package/plugin/CHANGELOG.md

@@ -7,6 +7,43 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [Unreleased]
 
+## [5.1.16] - 2026-10-04
+
+**After an upgrade, the first turn no longer fails with "No provider available" while an old engine host is still around.** 5.1.16 runs on senpi 2026.10.7, where `host handoff` (which the desktop runs when the engine changed) can replace an old host that still serves the client's own socket with no session open, instead of refusing it until the host is drained by hand. A host that holds a session is still refused, with the command that retires it. `host status` also names the right engine build for a generation started by a handoff. ([senpi#2701](https://github.com/code-yeongyu/senpi/issues/2701), [senpi#2698](https://github.com/code-yeongyu/senpi/issues/2698))
+
+### Fixed
+
+**A stranded transient memory run is reported once instead of on every memory sweep.** When a transient memory identity can't be promoted because a durable one with the same id already exists, the warning (with the manual fix) is now logged the first time only; one daemon log had held it 621 times. The identity is still counted on every sweep. Thanks to @cynkai. ([#8646](https://github.com/code-yeongyu/oh-my-openagent/issues/8646), [#8869](https://github.com/code-yeongyu/oh-my-openagent/pull/8869))
+
+### Changed
+
+**omo runs on senpi 2026.10.7.** Code mode gets an in-cell `wait()` barrier and `handle()` views in all four kernels, and the JavaScript kernel gains `tool.defined()`, `tool.undefine(name)` and named tools; eval recovers after a cancelled session switch or a failed runtime start instead of staying broken for the rest of the session; the Ruby kernel's memory notice works on Ruby 2.6 again. Full list: [senpi 2026.10.7](https://github.com/code-yeongyu/senpi/releases/tag/v2026.10.7).
+
+**The bundled `visual-qa` skill checks UI work against an Apple HIG checklist**, with a light and dark capture matrix at phone and desktop widths and a pass or fail verdict per item. ([#9533](https://github.com/code-yeongyu/oh-my-openagent/issues/9533), [#9536](https://github.com/code-yeongyu/oh-my-openagent/pull/9536))
+
+## [5.1.15] - 2026-10-04
+
+**A new `auto` permission preset approves only what it can prove stays inside your project.** 5.1.15 runs on senpi 2026.10.6, whose `auto` preset approves an action without asking only when it can show the action stays inside the project, judged on the exact file each tool will open; anything it can't pin down still asks, and your own deny and ask rules still win. ([senpi#2614](https://github.com/code-yeongyu/senpi/pull/2614), [senpi#2688](https://github.com/code-yeongyu/senpi/pull/2688))
+
+### Fixed
+
+**A question a session relayed to a chat thread closes when you answer it in the terminal.** Before, a relayed ask_user question answered (or timed out, or dismissed) in the session's own client stayed pending in the gateway store, so a chat connector kept that thread's later replies waiting until someone answered in chat. Outbox rows now also say whether a relayed answer is still being handed to the session (`answer_state`), so a connector waits for a delivered answer instead of treating a claim as settled. Thanks to @effortprogrammer. ([#9506](https://github.com/code-yeongyu/oh-my-openagent/pull/9506))
+
+**Editing your config no longer gets a hot reload rejected over a deprecated-key notice.** Renamed keys such as `deep` -> `deep-low` still load, but any edit that touched one produced a new notice, and the reload was refused. Thanks to @davhdavh for the report and @cynkai for the fix. ([#8555](https://github.com/code-yeongyu/oh-my-openagent/issues/8555), [#8878](https://github.com/code-yeongyu/oh-my-openagent/pull/8878))
+
+**`thread_read` pages forward when given `next_cursor`.** A truncated read returned a cursor, but retrying with it returned the same first window again. Thanks to @cynkai. ([#9435](https://github.com/code-yeongyu/oh-my-openagent/pull/9435))
+
+**A memory usage write that fails after shutdown is logged instead of surfacing as an unhandled rejection.** Thanks to @Dante-dan. ([#9524](https://github.com/code-yeongyu/oh-my-openagent/pull/9524))
+
+### Changed
+
+**omo runs on senpi 2026.10.6.** Besides the `auto` preset above, in that release the startup banner folds into one summary line; a 429 or 5xx from the provider shows as one retry banner instead of raw JSON, while a failed compaction still shows as an error; tool-card diffs read at 7:1 contrast and each edit card shows its change count; the `apply_patch` streaming preview stays bounded; `/files` and `/diff` open on Windows again; a first run with no provider gets the `/login` guidance; Linux x64 gets the native PTY backend. Full list: [senpi 2026.10.6](https://github.com/code-yeongyu/senpi/releases/tag/v2026.10.6).
+
+**A finished subagent's card reads as a summary**, for example `ran 2m 14s · 5 tools · $0.4213 (CH: 87%)`, instead of a line of debug tokens. ([senpi#2654](https://github.com/code-yeongyu/senpi/issues/2654), [#9513](https://github.com/code-yeongyu/oh-my-openagent/pull/9513))
+
+**Memory's `/doctor` checks load on first use** instead of with the extension, so startup loads less; the command behaves the same. Thanks to @Dante-dan. ([#9520](https://github.com/code-yeongyu/oh-my-openagent/pull/9520))
+
+
 ## [5.1.14] - 2026-10-03
 
 **Permission checks can no longer switch themselves off.** Up to 5.1.13, a failure while the permission system started (a misspelled `permissionPreset` in settings or on the command line, a `null` permission rule, or an unreadable approvals file) left every tool call running with no permission check, and nothing said so. 5.1.14 runs on senpi 2026.10.5, which refuses tool calls with `Permission setup failed: <reason>` until the setting is fixed. If you can't update yet, check that `permissionPreset` names a preset that exists and that no permission rule is `null`. ([senpi#2617](https://github.com/code-yeongyu/senpi/issues/2617), [senpi#2618](https://github.com/code-yeongyu/senpi/pull/2618))

package/plugin/README.md

@@ -65,4 +65,4 @@ Disable individual OMO Senpi components through the adapter's per-component disa
 
 The Senpi LSP tools are always registered so the harness can show the same six tools in every project: `lsp_diagnostics`, `lsp_goto_definition`, `lsp_find_references`, `lsp_symbols`, `lsp_prepare_rename`, and `lsp_rename`. Runtime execution is handled by the packaged OMO LSP daemon, not by a vendored Senpi client.
 
-Project-local `.pi/lsp-client.json` command or env entries are ignored for safety. Move custom LSP command definitions to your user `.pi/lsp-client.json`; project configs may keep safe fields such as extensions, language IDs, and priorities. `lsp_rename` still runs sequentially, and post-edit diagnostics keep using the daemon after edits without stopping it.
+Project-local `lsp-client.json` command or env entries (in `.omo/` or `.pi/`) are ignored for safety. Move custom LSP command definitions to your user `~/.omo/lsp-client.json` (`~/.pi/lsp-client.json` is still read as a fallback); project configs may keep safe fields such as extensions, language IDs, and priorities. `lsp_rename` still runs sequentially, and post-edit diagnostics keep using the daemon after edits without stopping it.