npm - ocs-calculators - Versions diffs - 0.3.1 → 0.3.2 - Mend

ocs-calculators 0.3.1 → 0.3.2

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.

Files changed (9) hide show

package/CHANGELOG.md CHANGED Viewed

@@ -3,7 +3,28 @@
 本文件格式遵循 [Keep a Changelog](https://keepachangelog.com/zh-CN/1.1.0/)，
 版本号遵循[语义化版本](https://semver.org/lang/zh-CN/)。
-## [0.3.1] - 2026-09-20
+## [0.3.2] - 2026-09-20
+### 修复
+- **`STANDARD_UNIT_WEIGHT_KG_PER_KM` 对齐（wire-specs）**：
+  `src/data/wire-specs.ts` 的 cthm120/cthm150/ctha120 三值由 TB/T 2810-2017
+  （纯铜）参考表 1082/1350/1070 更正为 TB/T 2809-2026 表3 实值 1076/1342/1076，
+  与 `TB2809_WIRE_PARAMS` 同源。连带 `tension`/`icing`/`wavespeed` 测试自重口径
+  夹具统一为 1.076/10.56（旧 1.082/10.61 的 2810 口径已废弃）。
+### 说明
+⚠️ **v0.3.1 含上述 `STANDARD_UNIT_WEIGHT_KG_PER_KM` 错值**（1082/1350/1070，
+影响 wire-specs 预设自重），已被本版取代——**请勿继续使用 0.3.1，请升级 0.3.2**。
+（0.3.1 的 copper 主参数表 `TB2809_WIRE_PARAMS` 为正确值，错值仅在 wire-specs 预设。）
+## [0.3.1] - 2026-09-20（已弃用，请升级 0.3.2）
+### ⚠️ 弃用警告
+本版含 `STANDARD_UNIT_WEIGHT_KG_PER_KM` 错值（1082/1350/1070，TB/T 2810 口径
+混入 wire-specs 预设），已在 **0.3.2** 修正。请直接安装 0.3.2。
 ### 适配说明

package/README.md CHANGED Viewed

@@ -15,6 +15,9 @@
 ![license](https://img.shields.io/npm/l/ocs-calculators)
 ![dependencies](https://img.shields.io/badge/dependencies-0-brightgreen)
+> ⚠️ **v0.3.1 已弃用**：该版本 `STANDARD_UNIT_WEIGHT_KG_PER_KM` 含错值
+> （1082/1350/1070，TB/T 2810 口径混入），已在 **v0.3.2** 修正。请勿安装或使用 0.3.1。
 ![首屏截图](docs/screenshot.png)
 ---
@@ -46,7 +49,7 @@ const curve = tensionCurve(
   {
     baseTensionKN: 20,
     baseTempDegC: -20,
-    weightPerLengthNPerM: 10.61442,
+    weightPerLengthNPerM: 10.56,
     spanM: 55,
     elasticModulusGPa: 120,
     crossSectionMM2: 120,
@@ -166,20 +169,15 @@ console.log(tensionMeta.disclaimer);  // 免责声明
 ## 自重口径（已确认）
-线密度取标准「参考单位质量」表值，而非由截面推算。标准表分两列，
-`CT 120｜标称截面 120｜计算截面 121｜参考单位质量 1082 kg/km`，
-注「参考单位质量按密度 8.94 g/cm³ 计算」——这个 8.94 g/cm³ 是配**计算截面**
-（把尺寸公差计入后的截面）用的，不是配标称截面：
-`121 × 8.94 × 1e-3 = 1.08174 ≈ 1.082 kg/m`。
-因此 CTMH-120 自重 `g = 1.082 × 9.81 = 10.61442 N/m`，
-与站点 `/calculator/tension/` 的预设 `rho=1.082`、表单默认值 `10.61`、
-以及本库 `TB2809_WIRE_PARAMS` 的 `1082` 三处同源。
+线密度取标准「参考单位质量」表值，与 TB/T 2809-2026 表3（=2017 派生同值）一致：
+CTMH-120/150 = **1076 / 1342**、CTAH-120（铜银）= **1076** kg/km
+（换算线密度 `1.076 / 1.342 / 1.076 kg/m`，CTMH-120 自重 `g = 1.076 × 9.81 ≈ 10.56 N/m`）。
-依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表。
+与站点 `/calculator/tension/` 预设 `rho`、表单默认值 `10.56`、
+以及本库 `TB2809_WIRE_PARAMS.unitWeightKgPerKm`、`STANDARD_UNIT_WEIGHT_KG_PER_KM` 四处同源。
-早期版本按标称截面 120 推算得 `1.0728 kg/m`（g ≈ 10.524 N/m），比标准值低约 0.86%，
-另有一版用回归表反算出魔数 `10.6222`，偏高约 0.07%，两者均已废弃。
+早期版本曾混入 TB/T 2810-2017（纯铜）参考表的 `1082 / 1350 / 1070` 及按 8.94 g/cm³
+推算的旧口径，与 2809 表3 实值不符，已于 2026-09-20 更正对齐。
 顺带说明为什么仅靠回归表约不动 g：g 在状态方程里以 `g²l²EA/24` 项出现，
 量级只有 0.006 kN，而 `αEA·Δt` 项有 15 kN。g 偏差 1% 只让张力变化约 0.001%，

package/dist/index.cjs CHANGED Viewed

@@ -136,9 +136,9 @@ var _chunkDHJGNVCIcjs = require('./chunk-DHJGNVCI.cjs');
 // src/data/wire-specs.ts
 var REFERENCE_DENSITY_G_PER_CM3 = 8.94;
 var STANDARD_UNIT_WEIGHT_KG_PER_KM = {
-  cthm120: 1082,
-  cthm150: 1350,
-  ctha120: 1070
+  cthm120: 1076,
+  cthm150: 1342,
+  ctha120: 1076
 };
 function unitWeightToKgPerM(kgPerKm) {
   return kgPerKm / 1e3;

package/dist/index.cjs.map CHANGED Viewed

	@@ -1 +1 @@
1	- {"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/index.cjs","../src/data/wire-specs.ts","../src/data/tb2809-ampacity.ts"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACF,wDAA6B;AAC7B;AACA;AC5FO,IAAM,4BAAA,EAA8B,IAAA;AAUpC,IAAM,+BAAA,EAAyE;AAAA,EACpF,OAAA,EAAS,IAAA;AAAA,EACT,OAAA,EAAS,IAAA;AAAA,EACT,OAAA,EAAS;AACX,CAAA;AAGO,SAAS,kBAAA,CAAmB,OAAA,EAAyB;AAC1D,EAAA,OAAO,QAAA,EAAU,GAAA;AACnB;AAYO,SAAS,sBAAA,CACd,eAAA,EACA,eAAA,EAAyB,2BAAA,EACjB;AAER,EAAA,OAAO,gBAAA,EAAkB,KAAA,EAAO,eAAA,EAAiB,GAAA;AACnD;AAGO,IAAM,6BAAA,EAA+B,KAAA;AAErC,IAAM,aAAA,EAAoC;AAAA,EAC/C;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E,CAAA;AAAA,EACA;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E,CAAA;AAAA,EACA;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA;AAAA;AAAA,IAGtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E;AACF,CAAA;AAGO,SAAS,cAAA,CAAe,EAAA,EAAkC;AAC/D,EAAA,OAAO,YAAA,CAAa,IAAA,CAAK,CAAC,CAAA,EAAA,GAAM,CAAA,CAAE,GAAA,IAAO,EAAE,CAAA;AAC7C;AAMO,SAAS,oBAAA,CAAqB,gBAAA,EAAkC;AACrE,EAAA,OAAO,iBAAA,EAAmB,oBAAA;AAC5B;AAKO,SAAS,mBAAA,CAAoB,IAAA,EAAwB;AAC1D,EAAA,OAAO,oBAAA,CAAqB,IAAA,CAAK,gBAAgB,CAAA;AACnD;ADsDA;AACA;AElJA,IAAM,EAAA,EAAI,CACR,IAAA,EACA,UAAA,EACA,QAAA,EACA,QAAA,EACA,SAAA,EACA,SAAA,EACA,UAAA,EAAA,GACoB;AACpB,EAAA,MAAM,WAAA,EAAuE;AAAA,IAC3E,CAAC,WAAA,EAAa,QAAQ,CAAA;AAAA,IACtB,CAAC,YAAA,EAAc,SAAS,CAAA;AAAA,IACxB,CAAC,YAAA,EAAc,SAAS,CAAA;AAAA,IACxB,CAAC,aAAA,EAAe,UAAU;AAAA,EAC5B,CAAA;AACA,EAAA,MAAM,IAAA,EAAuB,CAAC,CAAA;AAC9B,EAAA,IAAA,CAAA,MAAW,QAAA,GAAW,QAAA,EAAU;AAC9B,IAAA,IAAA,CAAA,MAAW,CAAC,SAAA,EAAW,IAAI,EAAA,GAAK,UAAA,EAAY;AAC1C,MAAA,MAAM,MAAA,EAAQ,QAAA,IAAY,IAAA,EAAM,IAAA,CAAK,CAAC,EAAA,EAAI,IAAA,CAAK,CAAC,CAAA;AAChD,MAAA,GAAA,CAAI,IAAA,CAAK;AAAA,QACP,IAAA;AAAA,QACA,UAAA;AAAA,QACA,eAAA,EAAiB,OAAA;AAAA,QACjB,SAAA;AAAA,QACA,SAAA,mBAAW,KAAA,UAAS;AAAA,MACtB,CAAC,CAAA;AAAA,IACH;AAAA,EACF;AACA,EAAA,OAAO,GAAA;AACT,CAAA;AAEO,IAAM,kBAAA,EAA8C;AAAA,EACzD,GAAG,CAAA,CAAE,IAAA,EAAM,QAAA,EAAK,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,IAAI,CAAA,EAAG,CAAC,IAAA,EAAM,IAAI,CAAC,CAAA;AAAA,EAC9E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,oBAAA,EAAO,CAAC,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAC;AAC/E,CAAA;AAMO,SAAS,aAAA,CAAc,MAAA,EAIA;AAC5B,EAAA,MAAM,IAAA,EAAM,iBAAA,CAAkB,IAAA;AAAA,IAC5B,CAAC,CAAA,EAAA,GACC,CAAA,CAAE,KAAA,IAAS,MAAA,CAAO,KAAA,GAClB,CAAA,CAAE,gBAAA,IAAoB,MAAA,CAAO,gBAAA,GAC7B,CAAA,CAAE,UAAA,IAAc,MAAA,CAAO;AAAA,EAC3B,CAAA;AACA,EAAA,OAAO,IAAA,IAAQ,KAAA,EAAA,EAAY,KAAA,EAAA,EAAY,GAAA,CAAI,SAAA;AAC7C;AF+HA;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACF,gqMAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/index.cjs","sourcesContent":[null,"import { G0 } from '../types';\n\n/*\n 接触线线材参数预设。\n \n ⚠️ 全部为标称参考值，实际取值以产品技术条件与设计文件为准。\n * ⚠️ 本站计算器的参数界面支持手工覆盖这些值 —— 那才是工程上正确的用法。\n \n 自重口径（2026-08-31 已确定）：\n * 线密度取标准「参考单位质量」表值，而非由标称截面推算。标准表分两列：\n * 型号｜标称截面｜计算截面｜参考单位质量\n * CT 120｜120｜121｜1082 kg/km\n * 注：参考单位质量按密度 8.94 g/cm³ 计算\n * 即标准的 8.94 g/cm³ 是配「计算截面」（把尺寸公差计入后的截面）用的，\n * 不是配「标称截面」用的：121 × 8.94 × 1e-3 = 1.0817 ≈ 1.082 kg/m。\n * 因此 CTMH-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，\n * 与站点 /calculator/tension/ 预设 rho=1.082、COPPER_TABLE.unitWeight=1082 一致。\n * 早期版本用标称截面 120 直接推算得 1.0728 kg/m，偏低约 0.85%，已废弃。\n \n 依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表；\n * CTMH/CTAH 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。\n /\n\nexport interface WireSpec {\n /* 唯一标识 /\n readonly id: WirePresetId;\n /* 中文名 /\n readonly name: string;\n /* 英文名 /\n readonly nameEn: string;\n /* 标称截面积 A，mm² /\n readonly crossSectionMM2: number;\n /* 计算截面积，mm²（标准表列，自重按此值 × 8.94 g/cm³ 计） /\n readonly calculatedSectionMM2: number;\n /* 弹性模量 E，GPa（标称参考值） /\n readonly elasticModulusGPa: number;\n /* 线膨胀系数 α，1/℃（标称参考值） /\n readonly expansionPerDegC: number;\n /* 线密度，kg/m（标准参考单位质量） /\n readonly linearMassKgPerM: number;\n}\n\n/* 参考密度，g/cm³（标准注：参考单位质量按此密度计） /\nexport const REFERENCE_DENSITY_G_PER_CM3 = 8.94;\n\n/* 线材预设 id /\nexport type WirePresetId = 'cthm120' \| 'cthm150' \| 'ctha120';\n\n/\n 标准「参考单位质量」表，kg/km。\n * 与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm 同源\n * （站点 /calculator/assets/calc-core.js 的 COPPER_TABLE）。\n /\nexport const STANDARD_UNIT_WEIGHT_KG_PER_KM: Readonly<Record<WirePresetId, number>> = {\n cthm120: 1082,\n cthm150: 1350,\n ctha120: 1070,\n};\n\n/* 由标准参考单位质量换算线密度，kg/m /\nexport function unitWeightToKgPerM(kgPerKm: number): number {\n return kgPerKm / 1000;\n}\n\n/\n 由截面积与密度反算线密度。\n \n ⚠️ 传入的必须是「计算截面」而非「标称截面」，否则结果偏低约 0.85%。\n * 120 mm² 标称对应计算截面 121 mm²；150 mm² 标称对应 151 mm²。\n \n @param crossSectionMM2 计算截面积，mm²\n * @param densityGPerCm3 密度，g/cm³\n * @returns 线密度，kg/m\n /\nexport function deriveLinearMassKgPerM(\n crossSectionMM2: number,\n densityGPerCm3: number = REFERENCE_DENSITY_G_PER_CM3,\n): number {\n // A[mm²] × 1e-6 [m²/mm²] × ρ[g/cm³] × 1000 [kg/m³ per g/cm³]\n return crossSectionMM2 1e-6 * densityGPerCm3 * 1000;\n}\n\n/** 铜及铜合金接触线的常用线膨胀系数，1/℃ /\nexport const COPPER_ALLOY_ALPHA_PER_DEG_C = 1.7e-5;\n\nexport const WIRE_PRESETS: readonly WireSpec[] = [\n {\n id: 'cthm120',\n name: 'CTMH-120（铜镁 120）',\n nameEn: 'CTMH-120 (CuMg 120 mm²)',\n crossSectionMM2: 120,\n calculatedSectionMM2: 121,\n elasticModulusGPa: 120,\n expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm120),\n },\n {\n id: 'cthm150',\n name: 'CTMH-150（铜镁 150）',\n nameEn: 'CTMH-150 (CuMg 150 mm²)',\n crossSectionMM2: 150,\n calculatedSectionMM2: 151,\n elasticModulusGPa: 120,\n expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm150),\n },\n {\n id: 'ctha120',\n name: 'CTAH-120（铜银 120）',\n nameEn: 'CTAH-120 (CuAg 120 mm²)',\n crossSectionMM2: 120,\n calculatedSectionMM2: 121,\n // 铜银合金 E=117 GPa，对齐站点 /calculator/tension/ 预设（2026-09-19 审计更正，\n // 旧值 120 误沿用铜镁档）\n elasticModulusGPa: 117,\n expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.ctha120),\n },\n];\n\n/* 按 id 取线材预设，找不到返回 undefined /\nexport function findWirePreset(id: string): WireSpec \| undefined {\n return WIRE_PRESETS.find((w) => w.id === id);\n}\n\n/\n 由线密度求单位自重荷载 g，N/m。\n * @param linearMassKgPerM 线密度，kg/m\n /\nexport function weightPerLengthNPerM(linearMassKgPerM: number): number {\n return linearMassKgPerM G0;\n}\n\n/*\n 由线材预设直接取单位自重荷载 g，N/m。\n /\nexport function weightOfPresetNPerM(spec: WireSpec): number {\n return weightPerLengthNPerM(spec.linearMassKgPerM);\n}\n","/\n TB/T 2809-2017 表5 持续载流量参考值（A）。\n \n ⚠️ 2017 版表5 历史参考（全 9 材质）；2026 版现行口径见 TB2809_WIRE_PARAMS\n * 双字段（src/copper/index.ts：ampacityIndoor150A 主值 / ampacityIndoor150A2017 对照）。\n \n 来源：itswe.com 标准规范库，据 TB/T 2809-2017 无水印全文扫描件逐格复核。\n \n 查表语义：\n * - 返回数值：该项载流量\n * - 返回 null：该 (材质，截面) 规格存在，但该工况按标准原文注\"不需要考核\"\n * （如纯铜接触线不考核 150℃ 工况）\n * - 返回 undefined：该材质无此截面规格（如铜铬锆无 120 mm²）\n \n ⚠️ 表中为室内（无风无日照试验条件）值与室外值；工程取值请以标准原文与\n * 产品技术条件为准。高海拔、隧道内等场景须另行叠加散热修正。\n /\n\nexport type ContactWireTypeCode =\n \| 'CT'\n \| 'CTA'\n \| 'CTS'\n \| 'CTSM'\n \| 'CTSH'\n \| 'CTM'\n \| 'CTMM'\n \| 'CTMH'\n \| 'CTCZ';\n\n/* 载流量考核工况 /\nexport type AmpacityCondition = 'indoor-95' \| 'outdoor-95' \| 'indoor-150' \| 'outdoor-150';\n\nexport type CrossSectionMM2 = 120 \| 150;\n\n/* 按截面索引的载流量对，[120 mm², 150 mm²] /\ntype SectionPair = readonly [number \| null, number \| null];\n\nexport interface AmpacityEntry {\n readonly type: ContactWireTypeCode;\n readonly materialZh: string;\n /* 标称截面，mm² /\n readonly crossSectionMM2: CrossSectionMM2;\n readonly condition: AmpacityCondition;\n /* 持续载流量，A。null 表示该项不需要考核 /\n readonly ampacityA: number \| null;\n}\n\nconst M = (\n type: ContactWireTypeCode,\n materialZh: string,\n sections: readonly CrossSectionMM2[],\n indoor95: SectionPair,\n outdoor95: SectionPair,\n indoor150: SectionPair,\n outdoor150: SectionPair,\n): AmpacityEntry[] => {\n const conditions: ReadonlyArray<readonly [AmpacityCondition, SectionPair]> = [\n ['indoor-95', indoor95],\n ['outdoor-95', outdoor95],\n ['indoor-150', indoor150],\n ['outdoor-150', outdoor150],\n ];\n const out: AmpacityEntry[] = [];\n for (const section of sections) {\n for (const [condition, pair] of conditions) {\n const value = section === 120 ? pair[0] : pair[1];\n out.push({\n type,\n materialZh,\n crossSectionMM2: section,\n condition,\n ampacityA: value ?? null,\n });\n }\n }\n return out;\n};\n\nexport const TB2809_AMPACITY_A: readonly AmpacityEntry[] = [\n ...M('CT', '铜', [120, 150], [360, 425], [495, 570], [null, null], [null, null]),\n ...M('CTA', '铜银', [120, 150], [360, 425], [495, 570], [515, 620], [680, 785]),\n ...M('CTS', '铜锡', [120, 150], [360, 425], [490, 565], [515, 620], [680, 790]),\n ...M('CTSM', '铜锡', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n ...M('CTSH', '铜锡', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n ...M('CTM', '铜镁', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n ...M('CTMM', '铜镁', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n ...M('CTMH', '铜镁', [120, 150], [300, 340], [410, 460], [430, 500], [560, 650]),\n ...M('CTCZ', '铜铬锆', [150], [null, 395], [null, 505], [null, 580], [null, 710]),\n];\n\n/\n 查表。\n * @returns 载流量 A；该规格存在但不考核时为 null；该材质无此截面时为 undefined\n */\nexport function findAmpacityA(params: {\n type: ContactWireTypeCode;\n crossSectionMM2: CrossSectionMM2;\n condition: AmpacityCondition;\n}): number \| null \| undefined {\n const row = TB2809_AMPACITY_A.find(\n (e) =>\n e.type === params.type &&\n e.crossSectionMM2 === params.crossSectionMM2 &&\n e.condition === params.condition,\n );\n return row === undefined ? undefined : row.ampacityA;\n}\n"]}
1	+ {"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/index.cjs","../src/data/wire-specs.ts","../src/data/tb2809-ampacity.ts"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACF,wDAA6B;AAC7B;AACA;AClGO,IAAM,4BAAA,EAA8B,IAAA;AAUpC,IAAM,+BAAA,EAAyE;AAAA,EACpF,OAAA,EAAS,IAAA;AAAA,EACT,OAAA,EAAS,IAAA;AAAA,EACT,OAAA,EAAS;AACX,CAAA;AAGO,SAAS,kBAAA,CAAmB,OAAA,EAAyB;AAC1D,EAAA,OAAO,QAAA,EAAU,GAAA;AACnB;AAYO,SAAS,sBAAA,CACd,eAAA,EACA,eAAA,EAAyB,2BAAA,EACjB;AAER,EAAA,OAAO,gBAAA,EAAkB,KAAA,EAAO,eAAA,EAAiB,GAAA;AACnD;AAGO,IAAM,6BAAA,EAA+B,KAAA;AAErC,IAAM,aAAA,EAAoC;AAAA,EAC/C;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E,CAAA;AAAA,EACA;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E,CAAA;AAAA,EACA;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA;AAAA;AAAA,IAGtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E;AACF,CAAA;AAGO,SAAS,cAAA,CAAe,EAAA,EAAkC;AAC/D,EAAA,OAAO,YAAA,CAAa,IAAA,CAAK,CAAC,CAAA,EAAA,GAAM,CAAA,CAAE,GAAA,IAAO,EAAE,CAAA;AAC7C;AAMO,SAAS,oBAAA,CAAqB,gBAAA,EAAkC;AACrE,EAAA,OAAO,iBAAA,EAAmB,oBAAA;AAC5B;AAKO,SAAS,mBAAA,CAAoB,IAAA,EAAwB;AAC1D,EAAA,OAAO,oBAAA,CAAqB,IAAA,CAAK,gBAAgB,CAAA;AACnD;AD4DA;AACA;AElJA,IAAM,EAAA,EAAI,CACR,IAAA,EACA,UAAA,EACA,QAAA,EACA,QAAA,EACA,SAAA,EACA,SAAA,EACA,UAAA,EAAA,GACoB;AACpB,EAAA,MAAM,WAAA,EAAuE;AAAA,IAC3E,CAAC,WAAA,EAAa,QAAQ,CAAA;AAAA,IACtB,CAAC,YAAA,EAAc,SAAS,CAAA;AAAA,IACxB,CAAC,YAAA,EAAc,SAAS,CAAA;AAAA,IACxB,CAAC,aAAA,EAAe,UAAU;AAAA,EAC5B,CAAA;AACA,EAAA,MAAM,IAAA,EAAuB,CAAC,CAAA;AAC9B,EAAA,IAAA,CAAA,MAAW,QAAA,GAAW,QAAA,EAAU;AAC9B,IAAA,IAAA,CAAA,MAAW,CAAC,SAAA,EAAW,IAAI,EAAA,GAAK,UAAA,EAAY;AAC1C,MAAA,MAAM,MAAA,EAAQ,QAAA,IAAY,IAAA,EAAM,IAAA,CAAK,CAAC,EAAA,EAAI,IAAA,CAAK,CAAC,CAAA;AAChD,MAAA,GAAA,CAAI,IAAA,CAAK;AAAA,QACP,IAAA;AAAA,QACA,UAAA;AAAA,QACA,eAAA,EAAiB,OAAA;AAAA,QACjB,SAAA;AAAA,QACA,SAAA,mBAAW,KAAA,UAAS;AAAA,MACtB,CAAC,CAAA;AAAA,IACH;AAAA,EACF;AACA,EAAA,OAAO,GAAA;AACT,CAAA;AAEO,IAAM,kBAAA,EAA8C;AAAA,EACzD,GAAG,CAAA,CAAE,IAAA,EAAM,QAAA,EAAK,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,IAAI,CAAA,EAAG,CAAC,IAAA,EAAM,IAAI,CAAC,CAAA;AAAA,EAC9E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,oBAAA,EAAO,CAAC,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAC;AAC/E,CAAA;AAMO,SAAS,aAAA,CAAc,MAAA,EAIA;AAC5B,EAAA,MAAM,IAAA,EAAM,iBAAA,CAAkB,IAAA;AAAA,IAC5B,CAAC,CAAA,EAAA,GACC,CAAA,CAAE,KAAA,IAAS,MAAA,CAAO,KAAA,GAClB,CAAA,CAAE,gBAAA,IAAoB,MAAA,CAAO,gBAAA,GAC7B,CAAA,CAAE,UAAA,IAAc,MAAA,CAAO;AAAA,EAC3B,CAAA;AACA,EAAA,OAAO,IAAA,IAAQ,KAAA,EAAA,EAAY,KAAA,EAAA,EAAY,GAAA,CAAI,SAAA;AAC7C;AF+HA;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACF,gqMAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/index.cjs","sourcesContent":[null,"import { G0 } from '../types';\n\n/*\n 接触线线材参数预设。\n \n ⚠️ 全部为标称参考值，实际取值以产品技术条件与设计文件为准。\n * ⚠️ 本站计算器的参数界面支持手工覆盖这些值 —— 那才是工程上正确的用法。\n \n 自重口径（2026-09-20 复核对齐）：\n * 线密度取标准「参考单位质量」实值，与 TB/T 2809-2026 表3（=2017 派生同值）一致，\n * 并与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm、站点\n * /calculator/tension/ 预设 rho、COPPER_TABLE.unitWeight 同源。\n * CTMH-120/150=1076/1342、CTAH-120=1076（铜银）。\n * 早期版本混入 TB/T 2810-2017（纯铜）参考表 1082/1350/1070 与 8.94 g/cm³ 推算，\n * 与 2809 表3 实值不符，2026-09-20 已更正。\n /\n\nexport interface WireSpec {\n /* 唯一标识 /\n readonly id: WirePresetId;\n /* 中文名 /\n readonly name: string;\n /* 英文名 /\n readonly nameEn: string;\n /* 标称截面积 A，mm² /\n readonly crossSectionMM2: number;\n /* 计算截面积，mm²（标准表列；自重实值见 linearMassKgPerM，不按密度推算） /\n readonly calculatedSectionMM2: number;\n /* 弹性模量 E，GPa（标称参考值） /\n readonly elasticModulusGPa: number;\n /* 线膨胀系数 α，1/℃（标称参考值） /\n readonly expansionPerDegC: number;\n /* 线密度，kg/m（标准参考单位质量） /\n readonly linearMassKgPerM: number;\n}\n\n/* 参考密度，g/cm³（标准注：参考单位质量按此密度计） /\nexport const REFERENCE_DENSITY_G_PER_CM3 = 8.94;\n\n/* 线材预设 id /\nexport type WirePresetId = 'cthm120' \| 'cthm150' \| 'ctha120';\n\n/\n 标准「参考单位质量」表，kg/km。\n * 与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm 同源\n * （站点 /calculator/assets/calc-core.js 的 COPPER_TABLE）。\n /\nexport const STANDARD_UNIT_WEIGHT_KG_PER_KM: Readonly<Record<WirePresetId, number>> = {\n cthm120: 1076,\n cthm150: 1342,\n ctha120: 1076,\n};\n\n/* 由标准参考单位质量换算线密度，kg/m /\nexport function unitWeightToKgPerM(kgPerKm: number): number {\n return kgPerKm / 1000;\n}\n\n/\n 由截面积与密度反算线密度。\n \n ⚠️ 传入的必须是「计算截面」而非「标称截面」，否则结果偏低约 0.85%。\n * 120 mm² 标称对应计算截面 121 mm²；150 mm² 标称对应 151 mm²。\n \n @param crossSectionMM2 计算截面积，mm²\n * @param densityGPerCm3 密度，g/cm³\n * @returns 线密度，kg/m\n /\nexport function deriveLinearMassKgPerM(\n crossSectionMM2: number,\n densityGPerCm3: number = REFERENCE_DENSITY_G_PER_CM3,\n): number {\n // A[mm²] × 1e-6 [m²/mm²] × ρ[g/cm³] × 1000 [kg/m³ per g/cm³]\n return crossSectionMM2 1e-6 * densityGPerCm3 * 1000;\n}\n\n/** 铜及铜合金接触线的常用线膨胀系数，1/℃ /\nexport const COPPER_ALLOY_ALPHA_PER_DEG_C = 1.7e-5;\n\nexport const WIRE_PRESETS: readonly WireSpec[] = [\n {\n id: 'cthm120',\n name: 'CTMH-120（铜镁 120）',\n nameEn: 'CTMH-120 (CuMg 120 mm²)',\n crossSectionMM2: 120,\n calculatedSectionMM2: 121,\n elasticModulusGPa: 120,\n expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm120),\n },\n {\n id: 'cthm150',\n name: 'CTMH-150（铜镁 150）',\n nameEn: 'CTMH-150 (CuMg 150 mm²)',\n crossSectionMM2: 150,\n calculatedSectionMM2: 151,\n elasticModulusGPa: 120,\n expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm150),\n },\n {\n id: 'ctha120',\n name: 'CTAH-120（铜银 120）',\n nameEn: 'CTAH-120 (CuAg 120 mm²)',\n crossSectionMM2: 120,\n calculatedSectionMM2: 121,\n // 铜银合金 E=117 GPa，对齐站点 /calculator/tension/ 预设（2026-09-19 审计更正，\n // 旧值 120 误沿用铜镁档）\n elasticModulusGPa: 117,\n expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.ctha120),\n },\n];\n\n/* 按 id 取线材预设，找不到返回 undefined /\nexport function findWirePreset(id: string): WireSpec \| undefined {\n return WIRE_PRESETS.find((w) => w.id === id);\n}\n\n/\n 由线密度求单位自重荷载 g，N/m。\n * @param linearMassKgPerM 线密度，kg/m\n /\nexport function weightPerLengthNPerM(linearMassKgPerM: number): number {\n return linearMassKgPerM G0;\n}\n\n/*\n 由线材预设直接取单位自重荷载 g，N/m。\n /\nexport function weightOfPresetNPerM(spec: WireSpec): number {\n return weightPerLengthNPerM(spec.linearMassKgPerM);\n}\n","/\n TB/T 2809-2017 表5 持续载流量参考值（A）。\n \n ⚠️ 2017 版表5 历史参考（全 9 材质）；2026 版现行口径见 TB2809_WIRE_PARAMS\n * 双字段（src/copper/index.ts：ampacityIndoor150A 主值 / ampacityIndoor150A2017 对照）。\n \n 来源：itswe.com 标准规范库，据 TB/T 2809-2017 无水印全文扫描件逐格复核。\n \n 查表语义：\n * - 返回数值：该项载流量\n * - 返回 null：该 (材质，截面) 规格存在，但该工况按标准原文注\"不需要考核\"\n * （如纯铜接触线不考核 150℃ 工况）\n * - 返回 undefined：该材质无此截面规格（如铜铬锆无 120 mm²）\n \n ⚠️ 表中为室内（无风无日照试验条件）值与室外值；工程取值请以标准原文与\n * 产品技术条件为准。高海拔、隧道内等场景须另行叠加散热修正。\n /\n\nexport type ContactWireTypeCode =\n \| 'CT'\n \| 'CTA'\n \| 'CTS'\n \| 'CTSM'\n \| 'CTSH'\n \| 'CTM'\n \| 'CTMM'\n \| 'CTMH'\n \| 'CTCZ';\n\n/* 载流量考核工况 /\nexport type AmpacityCondition = 'indoor-95' \| 'outdoor-95' \| 'indoor-150' \| 'outdoor-150';\n\nexport type CrossSectionMM2 = 120 \| 150;\n\n/* 按截面索引的载流量对，[120 mm², 150 mm²] /\ntype SectionPair = readonly [number \| null, number \| null];\n\nexport interface AmpacityEntry {\n readonly type: ContactWireTypeCode;\n readonly materialZh: string;\n /* 标称截面，mm² /\n readonly crossSectionMM2: CrossSectionMM2;\n readonly condition: AmpacityCondition;\n /* 持续载流量，A。null 表示该项不需要考核 /\n readonly ampacityA: number \| null;\n}\n\nconst M = (\n type: ContactWireTypeCode,\n materialZh: string,\n sections: readonly CrossSectionMM2[],\n indoor95: SectionPair,\n outdoor95: SectionPair,\n indoor150: SectionPair,\n outdoor150: SectionPair,\n): AmpacityEntry[] => {\n const conditions: ReadonlyArray<readonly [AmpacityCondition, SectionPair]> = [\n ['indoor-95', indoor95],\n ['outdoor-95', outdoor95],\n ['indoor-150', indoor150],\n ['outdoor-150', outdoor150],\n ];\n const out: AmpacityEntry[] = [];\n for (const section of sections) {\n for (const [condition, pair] of conditions) {\n const value = section === 120 ? pair[0] : pair[1];\n out.push({\n type,\n materialZh,\n crossSectionMM2: section,\n condition,\n ampacityA: value ?? null,\n });\n }\n }\n return out;\n};\n\nexport const TB2809_AMPACITY_A: readonly AmpacityEntry[] = [\n ...M('CT', '铜', [120, 150], [360, 425], [495, 570], [null, null], [null, null]),\n ...M('CTA', '铜银', [120, 150], [360, 425], [495, 570], [515, 620], [680, 785]),\n ...M('CTS', '铜锡', [120, 150], [360, 425], [490, 565], [515, 620], [680, 790]),\n ...M('CTSM', '铜锡', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n ...M('CTSH', '铜锡', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n ...M('CTM', '铜镁', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n ...M('CTMM', '铜镁', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n ...M('CTMH', '铜镁', [120, 150], [300, 340], [410, 460], [430, 500], [560, 650]),\n ...M('CTCZ', '铜铬锆', [150], [null, 395], [null, 505], [null, 580], [null, 710]),\n];\n\n/\n 查表。\n * @returns 载流量 A；该规格存在但不考核时为 null；该材质无此截面时为 undefined\n */\nexport function findAmpacityA(params: {\n type: ContactWireTypeCode;\n crossSectionMM2: CrossSectionMM2;\n condition: AmpacityCondition;\n}): number \| null \| undefined {\n const row = TB2809_AMPACITY_A.find(\n (e) =>\n e.type === params.type &&\n e.crossSectionMM2 === params.crossSectionMM2 &&\n e.condition === params.condition,\n );\n return row === undefined ? undefined : row.ampacityA;\n}\n"]}

package/dist/index.d.cts CHANGED Viewed

@@ -71,19 +71,13 @@ declare function iceLoadNPerM(params: IceLoadParams): number;
  * ⚠️ 全部为标称参考值，实际取值以产品技术条件与设计文件为准。
  * ⚠️ 本站计算器的参数界面支持手工覆盖这些值 —— 那才是工程上正确的用法。
  *
- * 自重口径（2026-08-31 已确定）：
- * 线密度取标准「参考单位质量」表值，而非由标称截面推算。标准表分两列：
- *   型号｜标称截面｜计算截面｜参考单位质量
- *   CT 120｜120｜121｜1082 kg/km
- *   注：参考单位质量按密度 8.94 g/cm³ 计算
- * 即标准的 8.94 g/cm³ 是配「计算截面」（把尺寸公差计入后的截面）用的，
- * 不是配「标称截面」用的：121 × 8.94 × 1e-3 = 1.0817 ≈ 1.082 kg/m。
- * 因此 CTMH-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，
- * 与站点 /calculator/tension/ 预设 rho=1.082、COPPER_TABLE.unitWeight=1082 一致。
- * 早期版本用标称截面 120 直接推算得 1.0728 kg/m，偏低约 0.85%，已废弃。
- *
- * 依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表；
- * CTMH/CTAH 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。
+ * 自重口径（2026-09-20 复核对齐）：
+ * 线密度取标准「参考单位质量」实值，与 TB/T 2809-2026 表3（=2017 派生同值）一致，
+ * 并与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm、站点
+ * /calculator/tension/ 预设 rho、COPPER_TABLE.unitWeight 同源。
+ * CTMH-120/150=1076/1342、CTAH-120=1076（铜银）。
+ * 早期版本混入 TB/T 2810-2017（纯铜）参考表 1082/1350/1070 与 8.94 g/cm³ 推算，
+ * 与 2809 表3 实值不符，2026-09-20 已更正。
  */
 interface WireSpec {
     /** 唯一标识 */
@@ -94,7 +88,7 @@ interface WireSpec {
     readonly nameEn: string;
     /** 标称截面积 A，mm² */
     readonly crossSectionMM2: number;
-    /** 计算截面积，mm²（标准表列，自重按此值 × 8.94 g/cm³ 计） */
+    /** 计算截面积，mm²（标准表列；自重实值见 linearMassKgPerM，不按密度推算） */
     readonly calculatedSectionMM2: number;
     /** 弹性模量 E，GPa（标称参考值） */
     readonly elasticModulusGPa: number;

package/dist/index.d.ts CHANGED Viewed

@@ -71,19 +71,13 @@ declare function iceLoadNPerM(params: IceLoadParams): number;
  * ⚠️ 全部为标称参考值，实际取值以产品技术条件与设计文件为准。
  * ⚠️ 本站计算器的参数界面支持手工覆盖这些值 —— 那才是工程上正确的用法。
  *
- * 自重口径（2026-08-31 已确定）：
- * 线密度取标准「参考单位质量」表值，而非由标称截面推算。标准表分两列：
- *   型号｜标称截面｜计算截面｜参考单位质量
- *   CT 120｜120｜121｜1082 kg/km
- *   注：参考单位质量按密度 8.94 g/cm³ 计算
- * 即标准的 8.94 g/cm³ 是配「计算截面」（把尺寸公差计入后的截面）用的，
- * 不是配「标称截面」用的：121 × 8.94 × 1e-3 = 1.0817 ≈ 1.082 kg/m。
- * 因此 CTMH-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，
- * 与站点 /calculator/tension/ 预设 rho=1.082、COPPER_TABLE.unitWeight=1082 一致。
- * 早期版本用标称截面 120 直接推算得 1.0728 kg/m，偏低约 0.85%，已废弃。
- *
- * 依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表；
- * CTMH/CTAH 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。
+ * 自重口径（2026-09-20 复核对齐）：
+ * 线密度取标准「参考单位质量」实值，与 TB/T 2809-2026 表3（=2017 派生同值）一致，
+ * 并与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm、站点
+ * /calculator/tension/ 预设 rho、COPPER_TABLE.unitWeight 同源。
+ * CTMH-120/150=1076/1342、CTAH-120=1076（铜银）。
+ * 早期版本混入 TB/T 2810-2017（纯铜）参考表 1082/1350/1070 与 8.94 g/cm³ 推算，
+ * 与 2809 表3 实值不符，2026-09-20 已更正。
  */
 interface WireSpec {
     /** 唯一标识 */
@@ -94,7 +88,7 @@ interface WireSpec {
     readonly nameEn: string;
     /** 标称截面积 A，mm² */
     readonly crossSectionMM2: number;
-    /** 计算截面积，mm²（标准表列，自重按此值 × 8.94 g/cm³ 计） */
+    /** 计算截面积，mm²（标准表列；自重实值见 linearMassKgPerM，不按密度推算） */
     readonly calculatedSectionMM2: number;
     /** 弹性模量 E，GPa（标称参考值） */
     readonly elasticModulusGPa: number;

package/dist/index.js CHANGED Viewed

@@ -136,9 +136,9 @@ import {
 // src/data/wire-specs.ts
 var REFERENCE_DENSITY_G_PER_CM3 = 8.94;
 var STANDARD_UNIT_WEIGHT_KG_PER_KM = {
-  cthm120: 1082,
-  cthm150: 1350,
-  ctha120: 1070
+  cthm120: 1076,
+  cthm150: 1342,
+  ctha120: 1076
 };
 function unitWeightToKgPerM(kgPerKm) {
   return kgPerKm / 1e3;

package/dist/index.js.map CHANGED Viewed

	@@ -1 +1 @@
1	- {"version":3,"sources":["../src/data/wire-specs.ts","../src/data/tb2809-ampacity.ts"],"sourcesContent":["import { G0 } from '../types';\n\n/*\n 接触线线材参数预设。\n \n ⚠️ 全部为标称参考值，实际取值以产品技术条件与设计文件为准。\n * ⚠️ 本站计算器的参数界面支持手工覆盖这些值 —— 那才是工程上正确的用法。\n \n 自重口径（2026-08-31 已确定）：\n * 线密度取标准「参考单位质量」表值，而非由标称截面推算。标准表分两列：\n * 型号｜标称截面｜计算截面｜参考单位质量\n * CT 120｜120｜121｜1082 kg/km\n * 注：参考单位质量按密度 8.94 g/cm³ 计算\n * 即标准的 8.94 g/cm³ 是配「计算截面」（把尺寸公差计入后的截面）用的，\n * 不是配「标称截面」用的：121 × 8.94 × 1e-3 = 1.0817 ≈ 1.082 kg/m。\n * 因此 CTMH-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，\n * 与站点 /calculator/tension/ 预设 rho=1.082、COPPER_TABLE.unitWeight=1082 一致。\n * 早期版本用标称截面 120 直接推算得 1.0728 kg/m，偏低约 0.85%，已废弃。\n \n 依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表；\n * CTMH/CTAH 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。\n /\n\nexport interface WireSpec {\n /* 唯一标识 /\n readonly id: WirePresetId;\n /* 中文名 /\n readonly name: string;\n /* 英文名 /\n readonly nameEn: string;\n /* 标称截面积 A，mm² /\n readonly crossSectionMM2: number;\n /* 计算截面积，mm²（标准表列，自重按此值 × 8.94 g/cm³ 计） /\n readonly calculatedSectionMM2: number;\n /* 弹性模量 E，GPa（标称参考值） /\n readonly elasticModulusGPa: number;\n /* 线膨胀系数 α，1/℃（标称参考值） /\n readonly expansionPerDegC: number;\n /* 线密度，kg/m（标准参考单位质量） /\n readonly linearMassKgPerM: number;\n}\n\n/* 参考密度，g/cm³（标准注：参考单位质量按此密度计） /\nexport const REFERENCE_DENSITY_G_PER_CM3 = 8.94;\n\n/* 线材预设 id /\nexport type WirePresetId = 'cthm120' \| 'cthm150' \| 'ctha120';\n\n/\n 标准「参考单位质量」表，kg/km。\n * 与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm 同源\n * （站点 /calculator/assets/calc-core.js 的 COPPER_TABLE）。\n /\nexport const STANDARD_UNIT_WEIGHT_KG_PER_KM: Readonly<Record<WirePresetId, number>> = {\n cthm120: 1082,\n cthm150: 1350,\n ctha120: 1070,\n};\n\n/* 由标准参考单位质量换算线密度，kg/m /\nexport function unitWeightToKgPerM(kgPerKm: number): number {\n return kgPerKm / 1000;\n}\n\n/\n 由截面积与密度反算线密度。\n \n ⚠️ 传入的必须是「计算截面」而非「标称截面」，否则结果偏低约 0.85%。\n * 120 mm² 标称对应计算截面 121 mm²；150 mm² 标称对应 151 mm²。\n \n @param crossSectionMM2 计算截面积，mm²\n * @param densityGPerCm3 密度，g/cm³\n * @returns 线密度，kg/m\n /\nexport function deriveLinearMassKgPerM(\n crossSectionMM2: number,\n densityGPerCm3: number = REFERENCE_DENSITY_G_PER_CM3,\n): number {\n // A[mm²] × 1e-6 [m²/mm²] × ρ[g/cm³] × 1000 [kg/m³ per g/cm³]\n return crossSectionMM2 1e-6 * densityGPerCm3 * 1000;\n}\n\n/** 铜及铜合金接触线的常用线膨胀系数，1/℃ /\nexport const COPPER_ALLOY_ALPHA_PER_DEG_C = 1.7e-5;\n\nexport const WIRE_PRESETS: readonly WireSpec[] = [\n {\n id: 'cthm120',\n name: 'CTMH-120（铜镁 120）',\n nameEn: 'CTMH-120 (CuMg 120 mm²)',\n crossSectionMM2: 120,\n calculatedSectionMM2: 121,\n elasticModulusGPa: 120,\n expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm120),\n },\n {\n id: 'cthm150',\n name: 'CTMH-150（铜镁 150）',\n nameEn: 'CTMH-150 (CuMg 150 mm²)',\n crossSectionMM2: 150,\n calculatedSectionMM2: 151,\n elasticModulusGPa: 120,\n expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm150),\n },\n {\n id: 'ctha120',\n name: 'CTAH-120（铜银 120）',\n nameEn: 'CTAH-120 (CuAg 120 mm²)',\n crossSectionMM2: 120,\n calculatedSectionMM2: 121,\n // 铜银合金 E=117 GPa，对齐站点 /calculator/tension/ 预设（2026-09-19 审计更正，\n // 旧值 120 误沿用铜镁档）\n elasticModulusGPa: 117,\n expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.ctha120),\n },\n];\n\n/* 按 id 取线材预设，找不到返回 undefined /\nexport function findWirePreset(id: string): WireSpec \| undefined {\n return WIRE_PRESETS.find((w) => w.id === id);\n}\n\n/\n 由线密度求单位自重荷载 g，N/m。\n * @param linearMassKgPerM 线密度，kg/m\n /\nexport function weightPerLengthNPerM(linearMassKgPerM: number): number {\n return linearMassKgPerM G0;\n}\n\n/*\n 由线材预设直接取单位自重荷载 g，N/m。\n /\nexport function weightOfPresetNPerM(spec: WireSpec): number {\n return weightPerLengthNPerM(spec.linearMassKgPerM);\n}\n","/\n TB/T 2809-2017 表5 持续载流量参考值（A）。\n \n ⚠️ 2017 版表5 历史参考（全 9 材质）；2026 版现行口径见 TB2809_WIRE_PARAMS\n * 双字段（src/copper/index.ts：ampacityIndoor150A 主值 / ampacityIndoor150A2017 对照）。\n \n 来源：itswe.com 标准规范库，据 TB/T 2809-2017 无水印全文扫描件逐格复核。\n \n 查表语义：\n * - 返回数值：该项载流量\n * - 返回 null：该 (材质，截面) 规格存在，但该工况按标准原文注\"不需要考核\"\n * （如纯铜接触线不考核 150℃ 工况）\n * - 返回 undefined：该材质无此截面规格（如铜铬锆无 120 mm²）\n \n ⚠️ 表中为室内（无风无日照试验条件）值与室外值；工程取值请以标准原文与\n * 产品技术条件为准。高海拔、隧道内等场景须另行叠加散热修正。\n /\n\nexport type ContactWireTypeCode =\n \| 'CT'\n \| 'CTA'\n \| 'CTS'\n \| 'CTSM'\n \| 'CTSH'\n \| 'CTM'\n \| 'CTMM'\n \| 'CTMH'\n \| 'CTCZ';\n\n/* 载流量考核工况 /\nexport type AmpacityCondition = 'indoor-95' \| 'outdoor-95' \| 'indoor-150' \| 'outdoor-150';\n\nexport type CrossSectionMM2 = 120 \| 150;\n\n/* 按截面索引的载流量对，[120 mm², 150 mm²] /\ntype SectionPair = readonly [number \| null, number \| null];\n\nexport interface AmpacityEntry {\n readonly type: ContactWireTypeCode;\n readonly materialZh: string;\n /* 标称截面，mm² /\n readonly crossSectionMM2: CrossSectionMM2;\n readonly condition: AmpacityCondition;\n /* 持续载流量，A。null 表示该项不需要考核 /\n readonly ampacityA: number \| null;\n}\n\nconst M = (\n type: ContactWireTypeCode,\n materialZh: string,\n sections: readonly CrossSectionMM2[],\n indoor95: SectionPair,\n outdoor95: SectionPair,\n indoor150: SectionPair,\n outdoor150: SectionPair,\n): AmpacityEntry[] => {\n const conditions: ReadonlyArray<readonly [AmpacityCondition, SectionPair]> = [\n ['indoor-95', indoor95],\n ['outdoor-95', outdoor95],\n ['indoor-150', indoor150],\n ['outdoor-150', outdoor150],\n ];\n const out: AmpacityEntry[] = [];\n for (const section of sections) {\n for (const [condition, pair] of conditions) {\n const value = section === 120 ? pair[0] : pair[1];\n out.push({\n type,\n materialZh,\n crossSectionMM2: section,\n condition,\n ampacityA: value ?? null,\n });\n }\n }\n return out;\n};\n\nexport const TB2809_AMPACITY_A: readonly AmpacityEntry[] = [\n ...M('CT', '铜', [120, 150], [360, 425], [495, 570], [null, null], [null, null]),\n ...M('CTA', '铜银', [120, 150], [360, 425], [495, 570], [515, 620], [680, 785]),\n ...M('CTS', '铜锡', [120, 150], [360, 425], [490, 565], [515, 620], [680, 790]),\n ...M('CTSM', '铜锡', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n ...M('CTSH', '铜锡', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n ...M('CTM', '铜镁', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n ...M('CTMM', '铜镁', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n ...M('CTMH', '铜镁', [120, 150], [300, 340], [410, 460], [430, 500], [560, 650]),\n ...M('CTCZ', '铜铬锆', [150], [null, 395], [null, 505], [null, 580], [null, 710]),\n];\n\n/\n 查表。\n * @returns 载流量 A；该规格存在但不考核时为 null；该材质无此截面时为 undefined\n */\nexport function findAmpacityA(params: {\n type: ContactWireTypeCode;\n crossSectionMM2: CrossSectionMM2;\n condition: AmpacityCondition;\n}): number \| null \| undefined {\n const row = TB2809_AMPACITY_A.find(\n (e) =>\n e.type === params.type &&\n e.crossSectionMM2 === params.crossSectionMM2 &&\n e.condition === params.condition,\n );\n return row === undefined ? undefined : row.ampacityA;\n}\n"],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AA2CO,IAAM,8BAA8B;AAUpC,IAAM,iCAAyE;AAAA,EACpF,SAAS;AAAA,EACT,SAAS;AAAA,EACT,SAAS;AACX;AAGO,SAAS,mBAAmB,SAAyB;AAC1D,SAAO,UAAU;AACnB;AAYO,SAAS,uBACd,iBACA,iBAAyB,6BACjB;AAER,SAAO,kBAAkB,OAAO,iBAAiB;AACnD;AAGO,IAAM,+BAA+B;AAErC,IAAM,eAAoC;AAAA,EAC/C;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AAAA,EACA;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AAAA,EACA;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA;AAAA;AAAA,IAGtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AACF;AAGO,SAAS,eAAe,IAAkC;AAC/D,SAAO,aAAa,KAAK,CAAC,MAAM,EAAE,OAAO,EAAE;AAC7C;AAMO,SAAS,qBAAqB,kBAAkC;AACrE,SAAO,mBAAmB;AAC5B;AAKO,SAAS,oBAAoB,MAAwB;AAC1D,SAAO,qBAAqB,KAAK,gBAAgB;AACnD;;;AC3FA,IAAM,IAAI,CACR,MACA,YACA,UACA,UACA,WACA,WACA,eACoB;AACpB,QAAM,aAAuE;AAAA,IAC3E,CAAC,aAAa,QAAQ;AAAA,IACtB,CAAC,cAAc,SAAS;AAAA,IACxB,CAAC,cAAc,SAAS;AAAA,IACxB,CAAC,eAAe,UAAU;AAAA,EAC5B;AACA,QAAM,MAAuB,CAAC;AAC9B,aAAW,WAAW,UAAU;AAC9B,eAAW,CAAC,WAAW,IAAI,KAAK,YAAY;AAC1C,YAAM,QAAQ,YAAY,MAAM,KAAK,CAAC,IAAI,KAAK,CAAC;AAChD,UAAI,KAAK;AAAA,QACP;AAAA,QACA;AAAA,QACA,iBAAiB;AAAA,QACjB;AAAA,QACA,WAAW,SAAS;AAAA,MACtB,CAAC;AAAA,IACH;AAAA,EACF;AACA,SAAO;AACT;AAEO,IAAM,oBAA8C;AAAA,EACzD,GAAG,EAAE,MAAM,UAAK,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,MAAM,IAAI,GAAG,CAAC,MAAM,IAAI,CAAC;AAAA,EAC9E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,sBAAO,CAAC,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,CAAC;AAC/E;AAMO,SAAS,cAAc,QAIA;AAC5B,QAAM,MAAM,kBAAkB;AAAA,IAC5B,CAAC,MACC,EAAE,SAAS,OAAO,QAClB,EAAE,oBAAoB,OAAO,mBAC7B,EAAE,cAAc,OAAO;AAAA,EAC3B;AACA,SAAO,QAAQ,SAAY,SAAY,IAAI;AAC7C;","names":[]}
1	+ {"version":3,"sources":["../src/data/wire-specs.ts","../src/data/tb2809-ampacity.ts"],"sourcesContent":["import { G0 } from '../types';\n\n/*\n 接触线线材参数预设。\n \n ⚠️ 全部为标称参考值，实际取值以产品技术条件与设计文件为准。\n * ⚠️ 本站计算器的参数界面支持手工覆盖这些值 —— 那才是工程上正确的用法。\n \n 自重口径（2026-09-20 复核对齐）：\n * 线密度取标准「参考单位质量」实值，与 TB/T 2809-2026 表3（=2017 派生同值）一致，\n * 并与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm、站点\n * /calculator/tension/ 预设 rho、COPPER_TABLE.unitWeight 同源。\n * CTMH-120/150=1076/1342、CTAH-120=1076（铜银）。\n * 早期版本混入 TB/T 2810-2017（纯铜）参考表 1082/1350/1070 与 8.94 g/cm³ 推算，\n * 与 2809 表3 实值不符，2026-09-20 已更正。\n /\n\nexport interface WireSpec {\n /* 唯一标识 /\n readonly id: WirePresetId;\n /* 中文名 /\n readonly name: string;\n /* 英文名 /\n readonly nameEn: string;\n /* 标称截面积 A，mm² /\n readonly crossSectionMM2: number;\n /* 计算截面积，mm²（标准表列；自重实值见 linearMassKgPerM，不按密度推算） /\n readonly calculatedSectionMM2: number;\n /* 弹性模量 E，GPa（标称参考值） /\n readonly elasticModulusGPa: number;\n /* 线膨胀系数 α，1/℃（标称参考值） /\n readonly expansionPerDegC: number;\n /* 线密度，kg/m（标准参考单位质量） /\n readonly linearMassKgPerM: number;\n}\n\n/* 参考密度，g/cm³（标准注：参考单位质量按此密度计） /\nexport const REFERENCE_DENSITY_G_PER_CM3 = 8.94;\n\n/* 线材预设 id /\nexport type WirePresetId = 'cthm120' \| 'cthm150' \| 'ctha120';\n\n/\n 标准「参考单位质量」表，kg/km。\n * 与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm 同源\n * （站点 /calculator/assets/calc-core.js 的 COPPER_TABLE）。\n /\nexport const STANDARD_UNIT_WEIGHT_KG_PER_KM: Readonly<Record<WirePresetId, number>> = {\n cthm120: 1076,\n cthm150: 1342,\n ctha120: 1076,\n};\n\n/* 由标准参考单位质量换算线密度，kg/m /\nexport function unitWeightToKgPerM(kgPerKm: number): number {\n return kgPerKm / 1000;\n}\n\n/\n 由截面积与密度反算线密度。\n \n ⚠️ 传入的必须是「计算截面」而非「标称截面」，否则结果偏低约 0.85%。\n * 120 mm² 标称对应计算截面 121 mm²；150 mm² 标称对应 151 mm²。\n \n @param crossSectionMM2 计算截面积，mm²\n * @param densityGPerCm3 密度，g/cm³\n * @returns 线密度，kg/m\n /\nexport function deriveLinearMassKgPerM(\n crossSectionMM2: number,\n densityGPerCm3: number = REFERENCE_DENSITY_G_PER_CM3,\n): number {\n // A[mm²] × 1e-6 [m²/mm²] × ρ[g/cm³] × 1000 [kg/m³ per g/cm³]\n return crossSectionMM2 1e-6 * densityGPerCm3 * 1000;\n}\n\n/** 铜及铜合金接触线的常用线膨胀系数，1/℃ /\nexport const COPPER_ALLOY_ALPHA_PER_DEG_C = 1.7e-5;\n\nexport const WIRE_PRESETS: readonly WireSpec[] = [\n {\n id: 'cthm120',\n name: 'CTMH-120（铜镁 120）',\n nameEn: 'CTMH-120 (CuMg 120 mm²)',\n crossSectionMM2: 120,\n calculatedSectionMM2: 121,\n elasticModulusGPa: 120,\n expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm120),\n },\n {\n id: 'cthm150',\n name: 'CTMH-150（铜镁 150）',\n nameEn: 'CTMH-150 (CuMg 150 mm²)',\n crossSectionMM2: 150,\n calculatedSectionMM2: 151,\n elasticModulusGPa: 120,\n expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm150),\n },\n {\n id: 'ctha120',\n name: 'CTAH-120（铜银 120）',\n nameEn: 'CTAH-120 (CuAg 120 mm²)',\n crossSectionMM2: 120,\n calculatedSectionMM2: 121,\n // 铜银合金 E=117 GPa，对齐站点 /calculator/tension/ 预设（2026-09-19 审计更正，\n // 旧值 120 误沿用铜镁档）\n elasticModulusGPa: 117,\n expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.ctha120),\n },\n];\n\n/* 按 id 取线材预设，找不到返回 undefined /\nexport function findWirePreset(id: string): WireSpec \| undefined {\n return WIRE_PRESETS.find((w) => w.id === id);\n}\n\n/\n 由线密度求单位自重荷载 g，N/m。\n * @param linearMassKgPerM 线密度，kg/m\n /\nexport function weightPerLengthNPerM(linearMassKgPerM: number): number {\n return linearMassKgPerM G0;\n}\n\n/*\n 由线材预设直接取单位自重荷载 g，N/m。\n /\nexport function weightOfPresetNPerM(spec: WireSpec): number {\n return weightPerLengthNPerM(spec.linearMassKgPerM);\n}\n","/\n TB/T 2809-2017 表5 持续载流量参考值（A）。\n \n ⚠️ 2017 版表5 历史参考（全 9 材质）；2026 版现行口径见 TB2809_WIRE_PARAMS\n * 双字段（src/copper/index.ts：ampacityIndoor150A 主值 / ampacityIndoor150A2017 对照）。\n \n 来源：itswe.com 标准规范库，据 TB/T 2809-2017 无水印全文扫描件逐格复核。\n \n 查表语义：\n * - 返回数值：该项载流量\n * - 返回 null：该 (材质，截面) 规格存在，但该工况按标准原文注\"不需要考核\"\n * （如纯铜接触线不考核 150℃ 工况）\n * - 返回 undefined：该材质无此截面规格（如铜铬锆无 120 mm²）\n \n ⚠️ 表中为室内（无风无日照试验条件）值与室外值；工程取值请以标准原文与\n * 产品技术条件为准。高海拔、隧道内等场景须另行叠加散热修正。\n /\n\nexport type ContactWireTypeCode =\n \| 'CT'\n \| 'CTA'\n \| 'CTS'\n \| 'CTSM'\n \| 'CTSH'\n \| 'CTM'\n \| 'CTMM'\n \| 'CTMH'\n \| 'CTCZ';\n\n/* 载流量考核工况 /\nexport type AmpacityCondition = 'indoor-95' \| 'outdoor-95' \| 'indoor-150' \| 'outdoor-150';\n\nexport type CrossSectionMM2 = 120 \| 150;\n\n/* 按截面索引的载流量对，[120 mm², 150 mm²] /\ntype SectionPair = readonly [number \| null, number \| null];\n\nexport interface AmpacityEntry {\n readonly type: ContactWireTypeCode;\n readonly materialZh: string;\n /* 标称截面，mm² /\n readonly crossSectionMM2: CrossSectionMM2;\n readonly condition: AmpacityCondition;\n /* 持续载流量，A。null 表示该项不需要考核 /\n readonly ampacityA: number \| null;\n}\n\nconst M = (\n type: ContactWireTypeCode,\n materialZh: string,\n sections: readonly CrossSectionMM2[],\n indoor95: SectionPair,\n outdoor95: SectionPair,\n indoor150: SectionPair,\n outdoor150: SectionPair,\n): AmpacityEntry[] => {\n const conditions: ReadonlyArray<readonly [AmpacityCondition, SectionPair]> = [\n ['indoor-95', indoor95],\n ['outdoor-95', outdoor95],\n ['indoor-150', indoor150],\n ['outdoor-150', outdoor150],\n ];\n const out: AmpacityEntry[] = [];\n for (const section of sections) {\n for (const [condition, pair] of conditions) {\n const value = section === 120 ? pair[0] : pair[1];\n out.push({\n type,\n materialZh,\n crossSectionMM2: section,\n condition,\n ampacityA: value ?? null,\n });\n }\n }\n return out;\n};\n\nexport const TB2809_AMPACITY_A: readonly AmpacityEntry[] = [\n ...M('CT', '铜', [120, 150], [360, 425], [495, 570], [null, null], [null, null]),\n ...M('CTA', '铜银', [120, 150], [360, 425], [495, 570], [515, 620], [680, 785]),\n ...M('CTS', '铜锡', [120, 150], [360, 425], [490, 565], [515, 620], [680, 790]),\n ...M('CTSM', '铜锡', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n ...M('CTSH', '铜锡', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n ...M('CTM', '铜镁', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n ...M('CTMM', '铜镁', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n ...M('CTMH', '铜镁', [120, 150], [300, 340], [410, 460], [430, 500], [560, 650]),\n ...M('CTCZ', '铜铬锆', [150], [null, 395], [null, 505], [null, 580], [null, 710]),\n];\n\n/\n 查表。\n * @returns 载流量 A；该规格存在但不考核时为 null；该材质无此截面时为 undefined\n */\nexport function findAmpacityA(params: {\n type: ContactWireTypeCode;\n crossSectionMM2: CrossSectionMM2;\n condition: AmpacityCondition;\n}): number \| null \| undefined {\n const row = TB2809_AMPACITY_A.find(\n (e) =>\n e.type === params.type &&\n e.crossSectionMM2 === params.crossSectionMM2 &&\n e.condition === params.condition,\n );\n return row === undefined ? undefined : row.ampacityA;\n}\n"],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAqCO,IAAM,8BAA8B;AAUpC,IAAM,iCAAyE;AAAA,EACpF,SAAS;AAAA,EACT,SAAS;AAAA,EACT,SAAS;AACX;AAGO,SAAS,mBAAmB,SAAyB;AAC1D,SAAO,UAAU;AACnB;AAYO,SAAS,uBACd,iBACA,iBAAyB,6BACjB;AAER,SAAO,kBAAkB,OAAO,iBAAiB;AACnD;AAGO,IAAM,+BAA+B;AAErC,IAAM,eAAoC;AAAA,EAC/C;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AAAA,EACA;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AAAA,EACA;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA;AAAA;AAAA,IAGtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AACF;AAGO,SAAS,eAAe,IAAkC;AAC/D,SAAO,aAAa,KAAK,CAAC,MAAM,EAAE,OAAO,EAAE;AAC7C;AAMO,SAAS,qBAAqB,kBAAkC;AACrE,SAAO,mBAAmB;AAC5B;AAKO,SAAS,oBAAoB,MAAwB;AAC1D,SAAO,qBAAqB,KAAK,gBAAgB;AACnD;;;ACrFA,IAAM,IAAI,CACR,MACA,YACA,UACA,UACA,WACA,WACA,eACoB;AACpB,QAAM,aAAuE;AAAA,IAC3E,CAAC,aAAa,QAAQ;AAAA,IACtB,CAAC,cAAc,SAAS;AAAA,IACxB,CAAC,cAAc,SAAS;AAAA,IACxB,CAAC,eAAe,UAAU;AAAA,EAC5B;AACA,QAAM,MAAuB,CAAC;AAC9B,aAAW,WAAW,UAAU;AAC9B,eAAW,CAAC,WAAW,IAAI,KAAK,YAAY;AAC1C,YAAM,QAAQ,YAAY,MAAM,KAAK,CAAC,IAAI,KAAK,CAAC;AAChD,UAAI,KAAK;AAAA,QACP;AAAA,QACA;AAAA,QACA,iBAAiB;AAAA,QACjB;AAAA,QACA,WAAW,SAAS;AAAA,MACtB,CAAC;AAAA,IACH;AAAA,EACF;AACA,SAAO;AACT;AAEO,IAAM,oBAA8C;AAAA,EACzD,GAAG,EAAE,MAAM,UAAK,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,MAAM,IAAI,GAAG,CAAC,MAAM,IAAI,CAAC;AAAA,EAC9E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,sBAAO,CAAC,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,CAAC;AAC/E;AAMO,SAAS,cAAc,QAIA;AAC5B,QAAM,MAAM,kBAAkB;AAAA,IAC5B,CAAC,MACC,EAAE,SAAS,OAAO,QAClB,EAAE,oBAAoB,OAAO,mBAC7B,EAAE,cAAc,OAAO;AAAA,EAC3B;AACA,SAAO,QAAQ,SAAY,SAAY,IAAI;AAC7C;","names":[]}

package/package.json CHANGED Viewed

@@ -1,6 +1,6 @@
 {
   "name": "ocs-calculators",
-  "version": "0.3.1",
+  "version": "0.3.2",
   "description": "铁路接触网（OCS）工程计算工具集 —— 张力、弛度、吊弦、风偏移等计算，零依赖纯函数实现 / Railway overhead contact system (OCS) engineering calculators as zero-dependency pure functions",
   "keywords": [
     "catenary",