ocs-calculators 0.3.0 → 0.3.1

package/dist/curve-stagger/index.d.cts

@@ -41,9 +41,9 @@ interface CurveStaggerResult {
     readonly cantShiftM: number;
     /** 跨中风偏 p_w，m */
     readonly windOffsetM: number;
-    /** 矢度与拉出值同向时的偏移，m */
+    /** 矢度与拉出值同向、超高横移反向的偏移 |ā + c − δ| + p_w，m */
     readonly offsetPlusM: number;
-    /** 矢度与拉出值反向时的偏移，m */
+    /** 矢度与拉出值反向、超高横移同向的偏移 |ā − c + δ| + p_w，m */
     readonly offsetMinusM: number;
     /** 取两者较大值，m */
     readonly maxOffsetM: number;
@@ -68,9 +68,10 @@ declare function cantShiftM(cantM: number, pantographHeightM?: number, gaugeM?:
  *
  * 风偏取风向垂直线路的最不利工况（sin²θ = 1）。
  *
- * ⚠️ 与站点源码一致：超高横移 δ 会计算并返回，但**不参与** e 的合成。
- * 站点 JSDoc 描述的公式为 `e = |ā ± c ∓ δ| + p_w`，与其实现不符；
- * 若站点后续修正，本库的 offsetPlusM / offsetMinusM 需同步调整。
+ * 2026-09-19 更正（修复批 D）：超高横移 δ 纳入综合偏移合成——
+ *   e₊ = |ā + c − δ| + p_w（矢度与拉出值同向、超高横移反向）
+ *   e₋ = |ā − c + δ| + p_w
+ * 与站点 calc-core.js curveStaggerCheck 同批修正（旧注释「δ 不参与合成」已删除）。
  */
 declare function curveStaggerCheck(input: CurveStaggerInput): CurveStaggerResult;
 

package/dist/curve-stagger/index.d.ts

@@ -41,9 +41,9 @@ interface CurveStaggerResult {
     readonly cantShiftM: number;
     /** 跨中风偏 p_w，m */
     readonly windOffsetM: number;
-    /** 矢度与拉出值同向时的偏移，m */
+    /** 矢度与拉出值同向、超高横移反向的偏移 |ā + c − δ| + p_w，m */
     readonly offsetPlusM: number;
-    /** 矢度与拉出值反向时的偏移，m */
+    /** 矢度与拉出值反向、超高横移同向的偏移 |ā − c + δ| + p_w，m */
     readonly offsetMinusM: number;
     /** 取两者较大值，m */
     readonly maxOffsetM: number;
@@ -68,9 +68,10 @@ declare function cantShiftM(cantM: number, pantographHeightM?: number, gaugeM?:
  *
  * 风偏取风向垂直线路的最不利工况（sin²θ = 1）。
  *
- * ⚠️ 与站点源码一致：超高横移 δ 会计算并返回，但**不参与** e 的合成。
- * 站点 JSDoc 描述的公式为 `e = |ā ± c ∓ δ| + p_w`，与其实现不符；
- * 若站点后续修正，本库的 offsetPlusM / offsetMinusM 需同步调整。
+ * 2026-09-19 更正（修复批 D）：超高横移 δ 纳入综合偏移合成——
+ *   e₊ = |ā + c − δ| + p_w（矢度与拉出值同向、超高横移反向）
+ *   e₋ = |ā − c + δ| + p_w
+ * 与站点 calc-core.js curveStaggerCheck 同批修正（旧注释「δ 不参与合成」已删除）。
  */
 declare function curveStaggerCheck(input: CurveStaggerInput): CurveStaggerResult;
 

package/dist/curve-stagger/index.js

@@ -5,7 +5,7 @@ import {
   curveStaggerCheck,
   curveStaggerMeta,
   versineM
-} from "../chunk-IFVYGNT3.js";
+} from "../chunk-XRSWKYS6.js";
 export {
   DEFAULT_PANTOGRAPH_HEIGHT_M,
   STANDARD_GAUGE_M,

package/dist/dropper/index.cjs

@@ -4,12 +4,12 @@
 
 
 
-var _chunkJ2UXRMTUcjs = require('../chunk-J2UXRMTU.cjs');
+var _chunkFHPRIOTMcjs = require('../chunk-FHPRIOTM.cjs');
 
 
 
 
 
 
-exports.dropperLengths = _chunkJ2UXRMTUcjs.dropperLengths; exports.dropperMeta = _chunkJ2UXRMTUcjs.dropperMeta; exports.dropperPositionsM = _chunkJ2UXRMTUcjs.dropperPositionsM; exports.maxParabolaSagM = _chunkJ2UXRMTUcjs.maxParabolaSagM; exports.parabolaSagM = _chunkJ2UXRMTUcjs.parabolaSagM;
+exports.dropperLengths = _chunkFHPRIOTMcjs.dropperLengths; exports.dropperMeta = _chunkFHPRIOTMcjs.dropperMeta; exports.dropperPositionsM = _chunkFHPRIOTMcjs.dropperPositionsM; exports.maxParabolaSagM = _chunkFHPRIOTMcjs.maxParabolaSagM; exports.parabolaSagM = _chunkFHPRIOTMcjs.parabolaSagM;
 //# sourceMappingURL=index.cjs.map

package/dist/dropper/index.d.cts

@@ -5,11 +5,11 @@ declare const dropperMeta: CalculatorMeta;
 /** 悬挂类型 */
 type SuspensionType = 'simple' | 'elastic';
 interface DropperInput {
-    /** 悬挂类型。弹性链形须同时提供 messenger 参数 */
+    /** 悬挂类型 */
     readonly suspension: SuspensionType;
     /** 跨距 L，m */
     readonly spanM: number;
-    /** 接触线张力 T_c，kN */
+    /** 接触线张力 T_c，kN（弹性链形计算接触线弛度 f_c 用；简单链形不参与计算但保留正值校验） */
     readonly contactTensionKN: number;
     /** 结构高度 H，m */
     readonly structureHeightM: number;
@@ -18,15 +18,16 @@ interface DropperInput {
     /** 吊弦间距 d，m，须能整除跨距 */
     readonly dropperSpacingM: number;
     /**
-     * 承力索参数。弹性链形悬挂（'elastic'）必填，
-     * 简单链形悬挂传 null 或不传。
+     * 承力索参数，两种悬挂类型均必填（2026-09-19 口径更正）：
+     * 承力索弛度按总单位荷载 w = q_c + q_m（含经吊弦传递的接触线荷载）
+     * 与承力索张力 T_m 计算，简单链形同样需要。
      */
-    readonly messenger?: {
+    readonly messenger: {
         /** 承力索张力 T_m，kN */
         readonly tensionKN: number;
         /** 承力索单位荷载 q_m，kN/m */
         readonly loadKNPerM: number;
-    } | null;
+    };
 }
 /** 单个吊弦点的计算结果 */
 interface DropperPoint {
@@ -34,16 +35,16 @@ interface DropperPoint {
     readonly index: number;
     /** 距起始端的距离 x，m */
     readonly positionM: number;
-    /** 接触线弛度 f_c(x)，m */
+    /** 接触线弛度 f_c(x)，m（简单链形恒为 0；使吊弦变长） */
     readonly contactSagM: number;
-    /** 承力索弛度 f_m(x)，m（简单链形恒为 0） */
+    /** 承力索弛度 f_m(x)，m（按总荷载 w = q_c + q_m 口径；使吊弦变短） */
     readonly messengerSagM: number;
     /** 吊弦长度 l，m */
     readonly dropperLengthM: number;
 }
 interface DropperResult {
     readonly points: readonly DropperPoint[];
-    /** 跨中最大弛度 f_max，m */
+    /** 跨中最大有效弛度 f_m − f_c，m */
     readonly maxSagM: number;
     /** 最短吊弦长度，m（位于跨中） */
     readonly shortestDropperM: number;
@@ -51,7 +52,7 @@ interface DropperResult {
     readonly count: number;
 }
 /**
- * 抛物线弛度：f(x) = q·x·(L−x) / (2·T)
+ * 抛物线弛度：f(x) = q·x·(L−x) / (2·T) = 4·f_max·x·(L−x) / L²。
  *
  * 对接触线和承力索通用，区别只在传哪一组 q / T。
  *
@@ -74,10 +75,17 @@ declare function maxParabolaSagM(spanM: number, loadKNPerM: number, tensionKN: n
  */
 declare function dropperPositionsM(spanM: number, spacingM: number): number[];
 /**
- * 计算整跨各吊弦长度。
+ * 计算整跨各吊弦长度（2026-09-19 口径更正）。
  *
- * 简单链形：l_i = H − f_c(x_i)
- * 弹性链形：l_i = H − f_c(x_i) + f_m(x_i)
+ * 承力索下垂使吊弦变短、接触线（相对水平）下垂使吊弦变长：
+ *
+ * - 承力索弛度（总荷载口径）：f_m(x) = 4·f_m_max·x(L−x)/L²，
+ *   f_m_max = w·L²/(8·T_m)，w = q_c + q_m（承力索承担的总单位荷载）
+ * - 接触线弛度（弹性链形）：f_c(x) = 4·f_c_max·x(L−x)/L²，
+ *   f_c_max = q_c·L²/(8·T_c)
+ *
+ * 简单链形：l_i = H − f_m(x_i)
+ * 弹性链形：l_i = H − f_m(x_i) + f_c(x_i)
  */
 declare function dropperLengths(input: DropperInput): DropperResult;
 

package/dist/dropper/index.d.ts

@@ -5,11 +5,11 @@ declare const dropperMeta: CalculatorMeta;
 /** 悬挂类型 */
 type SuspensionType = 'simple' | 'elastic';
 interface DropperInput {
-    /** 悬挂类型。弹性链形须同时提供 messenger 参数 */
+    /** 悬挂类型 */
     readonly suspension: SuspensionType;
     /** 跨距 L，m */
     readonly spanM: number;
-    /** 接触线张力 T_c，kN */
+    /** 接触线张力 T_c，kN（弹性链形计算接触线弛度 f_c 用；简单链形不参与计算但保留正值校验） */
     readonly contactTensionKN: number;
     /** 结构高度 H，m */
     readonly structureHeightM: number;
@@ -18,15 +18,16 @@ interface DropperInput {
     /** 吊弦间距 d，m，须能整除跨距 */
     readonly dropperSpacingM: number;
     /**
-     * 承力索参数。弹性链形悬挂（'elastic'）必填，
-     * 简单链形悬挂传 null 或不传。
+     * 承力索参数，两种悬挂类型均必填（2026-09-19 口径更正）：
+     * 承力索弛度按总单位荷载 w = q_c + q_m（含经吊弦传递的接触线荷载）
+     * 与承力索张力 T_m 计算，简单链形同样需要。
      */
-    readonly messenger?: {
+    readonly messenger: {
         /** 承力索张力 T_m，kN */
         readonly tensionKN: number;
         /** 承力索单位荷载 q_m，kN/m */
         readonly loadKNPerM: number;
-    } | null;
+    };
 }
 /** 单个吊弦点的计算结果 */
 interface DropperPoint {
@@ -34,16 +35,16 @@ interface DropperPoint {
     readonly index: number;
     /** 距起始端的距离 x，m */
     readonly positionM: number;
-    /** 接触线弛度 f_c(x)，m */
+    /** 接触线弛度 f_c(x)，m（简单链形恒为 0；使吊弦变长） */
     readonly contactSagM: number;
-    /** 承力索弛度 f_m(x)，m（简单链形恒为 0） */
+    /** 承力索弛度 f_m(x)，m（按总荷载 w = q_c + q_m 口径；使吊弦变短） */
     readonly messengerSagM: number;
     /** 吊弦长度 l，m */
     readonly dropperLengthM: number;
 }
 interface DropperResult {
     readonly points: readonly DropperPoint[];
-    /** 跨中最大弛度 f_max，m */
+    /** 跨中最大有效弛度 f_m − f_c，m */
     readonly maxSagM: number;
     /** 最短吊弦长度，m（位于跨中） */
     readonly shortestDropperM: number;
@@ -51,7 +52,7 @@ interface DropperResult {
     readonly count: number;
 }
 /**
- * 抛物线弛度：f(x) = q·x·(L−x) / (2·T)
+ * 抛物线弛度：f(x) = q·x·(L−x) / (2·T) = 4·f_max·x·(L−x) / L²。
  *
  * 对接触线和承力索通用，区别只在传哪一组 q / T。
  *
@@ -74,10 +75,17 @@ declare function maxParabolaSagM(spanM: number, loadKNPerM: number, tensionKN: n
  */
 declare function dropperPositionsM(spanM: number, spacingM: number): number[];
 /**
- * 计算整跨各吊弦长度。
+ * 计算整跨各吊弦长度（2026-09-19 口径更正）。
  *
- * 简单链形：l_i = H − f_c(x_i)
- * 弹性链形：l_i = H − f_c(x_i) + f_m(x_i)
+ * 承力索下垂使吊弦变短、接触线（相对水平）下垂使吊弦变长：
+ *
+ * - 承力索弛度（总荷载口径）：f_m(x) = 4·f_m_max·x(L−x)/L²，
+ *   f_m_max = w·L²/(8·T_m)，w = q_c + q_m（承力索承担的总单位荷载）
+ * - 接触线弛度（弹性链形）：f_c(x) = 4·f_c_max·x(L−x)/L²，
+ *   f_c_max = q_c·L²/(8·T_c)
+ *
+ * 简单链形：l_i = H − f_m(x_i)
+ * 弹性链形：l_i = H − f_m(x_i) + f_c(x_i)
  */
 declare function dropperLengths(input: DropperInput): DropperResult;
 

package/dist/dropper/index.js

@@ -4,7 +4,7 @@ import {
   dropperPositionsM,
   maxParabolaSagM,
   parabolaSagM
-} from "../chunk-UO2PHBC3.js";
+} from "../chunk-XQBTMD7W.js";
 export {
   dropperLengths,
   dropperMeta,

package/dist/index.cjs

@@ -11,7 +11,7 @@ var _chunk3ERFRRHZcjs = require('./chunk-3ERFRRHZ.cjs');
 
 
 
-var _chunkRVP3IU2Lcjs = require('./chunk-RVP3IU2L.cjs');
+var _chunkNSVETJYAcjs = require('./chunk-NSVETJYA.cjs');
 
 
 
@@ -40,14 +40,14 @@ var _chunkFVESJBUDcjs = require('./chunk-FVESJBUD.cjs');
 
 
 
-var _chunk4UU7WA7Ncjs = require('./chunk-4UU7WA7N.cjs');
+var _chunkVPW4T6YNcjs = require('./chunk-VPW4T6YN.cjs');
 
 
 
 
 
 
-var _chunkJ2UXRMTUcjs = require('./chunk-J2UXRMTU.cjs');
+var _chunkFHPRIOTMcjs = require('./chunk-FHPRIOTM.cjs');
 
 
 
@@ -88,7 +88,7 @@ var _chunk57J7I6JAcjs = require('./chunk-57J7I6JA.cjs');
 
 
 
-var _chunk5Q6IASB2cjs = require('./chunk-5Q6IASB2.cjs');
+var _chunkTXFBPGHRcjs = require('./chunk-TXFBPGHR.cjs');
 
 
 
@@ -105,7 +105,7 @@ var _chunkJJR7ROMGcjs = require('./chunk-JJR7ROMG.cjs');
 
 
 
-var _chunkHXALVJ4Gcjs = require('./chunk-HXALVJ4G.cjs');
+var _chunkYGTESFOQcjs = require('./chunk-YGTESFOQ.cjs');
 
 
 
@@ -115,7 +115,7 @@ var _chunkWGTOBRYVcjs = require('./chunk-WGTOBRYV.cjs');
 
 
 
-var _chunkMTAYG3U2cjs = require('./chunk-MTAYG3U2.cjs');
+var _chunkFRYBXJCMcjs = require('./chunk-FRYBXJCM.cjs');
 
 
 
@@ -131,7 +131,7 @@ var _chunkAVQ4F6DFcjs = require('./chunk-AVQ4F6DF.cjs');
 
 
 
-var _chunkX25CXRVEcjs = require('./chunk-X25CXRVE.cjs');
+var _chunkDHJGNVCIcjs = require('./chunk-DHJGNVCI.cjs');
 
 // src/data/wire-specs.ts
 var REFERENCE_DENSITY_G_PER_CM3 = 8.94;
@@ -174,7 +174,9 @@ var WIRE_PRESETS = [
     nameEn: "CTAH-120 (CuAg 120 mm\xB2)",
     crossSectionMM2: 120,
     calculatedSectionMM2: 121,
-    elasticModulusGPa: 120,
+    // 铜银合金 E=117 GPa，对齐站点 /calculator/tension/ 预设（2026-09-19 审计更正，
+    // 旧值 120 误沿用铜镁档）
+    elasticModulusGPa: 117,
     expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,
     linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.ctha120)
   }
@@ -333,5 +335,5 @@ function findAmpacityA(params) {
 
 
 
-exports.AIR_DENSITY_KG_PER_M3 = _chunkFVESJBUDcjs.AIR_DENSITY_KG_PER_M3; exports.ASSEMBLY_TOLERANCE_MM = _chunkWGTOBRYVcjs.ASSEMBLY_TOLERANCE_MM; exports.CONVENTIONAL_MARGIN_MM = _chunk5Q6IASB2cjs.CONVENTIONAL_MARGIN_MM; exports.COPPER_ALLOY_ALPHA_PER_DEG_C = COPPER_ALLOY_ALPHA_PER_DEG_C; exports.COPPER_ALPHA_PER_DEG_C = _chunkDGO2DCO5cjs.COPPER_ALPHA_PER_DEG_C; exports.CREEPAGE_FLOOR_GENERAL = _chunkAVQ4F6DFcjs.CREEPAGE_FLOOR_GENERAL; exports.CREEPAGE_FLOOR_VCUT = _chunkAVQ4F6DFcjs.CREEPAGE_FLOOR_VCUT; exports.DEFAULT_BASE_AMBIENT_TEMP_DEG_C = _chunkNBFOB2PIcjs.DEFAULT_BASE_AMBIENT_TEMP_DEG_C; exports.DEFAULT_ICE_DENSITY_KG_PER_M3 = _chunkP6KUGPHDcjs.DEFAULT_ICE_DENSITY_KG_PER_M3; exports.DEFAULT_MIN_END_VOLTAGE_V = _chunkRVP3IU2Lcjs.DEFAULT_MIN_END_VOLTAGE_V; exports.DEFAULT_PANTOGRAPH_HEIGHT_M = _chunk4UU7WA7Ncjs.DEFAULT_PANTOGRAPH_HEIGHT_M; exports.DEFAULT_REPLACEMENT_THRESHOLD_PERCENT = _chunk5INEDXRYcjs.DEFAULT_REPLACEMENT_THRESHOLD_PERCENT; exports.DEFAULT_WARN_THRESHOLD = _chunkNBHEOJ5Acjs.DEFAULT_WARN_THRESHOLD; exports.G0 = _chunkP6KUGPHDcjs.G0; exports.IACS_RESISTIVITY_OHM_MM2_PER_M = _chunkDGO2DCO5cjs.IACS_RESISTIVITY_OHM_MM2_PER_M; exports.MIN_MARGIN_MM = _chunk5Q6IASB2cjs.MIN_MARGIN_MM; exports.REFERENCE_DENSITY_G_PER_CM3 = REFERENCE_DENSITY_G_PER_CM3; exports.REF_TARGET_COEFF = _chunkRPKDEFSJcjs.REF_TARGET_COEFF; exports.REF_TARGET_OFFSET_N = _chunkRPKDEFSJcjs.REF_TARGET_OFFSET_N; exports.STANDARD_GAUGE_M = _chunk4UU7WA7Ncjs.STANDARD_GAUGE_M; exports.STANDARD_UNIT_WEIGHT_KG_PER_KM = STANDARD_UNIT_WEIGHT_KG_PER_KM; exports.STEEL_POLE_SERIES_KNM = _chunkR4IVRYJAcjs.STEEL_POLE_SERIES_KNM; exports.TB2809_AMPACITY_A = TB2809_AMPACITY_A; exports.TB2809_WIRE_PARAMS = _chunkMTAYG3U2cjs.TB2809_WIRE_PARAMS; exports.TENSION_DIFF_RATIO = _chunkJJR7ROMGcjs.TENSION_DIFF_RATIO; exports.TEST_MOMENT_FACTOR = _chunkR4IVRYJAcjs.TEST_MOMENT_FACTOR; exports.TRANSMISSION_RATIOS = _chunk5Q6IASB2cjs.TRANSMISSION_RATIOS; exports.USCD_BANDS = _chunkAVQ4F6DFcjs.USCD_BANDS; exports.WIRE_PRESETS = WIRE_PRESETS; exports.ampacityDeratingFactor = _chunkNBFOB2PIcjs.ampacityDeratingFactor; exports.ampacityMeta = _chunkNBFOB2PIcjs.ampacityMeta; exports.anchorLengthCheck = _chunkJJR7ROMGcjs.anchorLengthCheck; exports.anchorLengthMeta = _chunkJJR7ROMGcjs.anchorLengthMeta; exports.assessContactForce = _chunkRPKDEFSJcjs.assessContactForce; exports.bValue = _chunkHXALVJ4Gcjs.bValue; exports.bvalueMeta = _chunkHXALVJ4Gcjs.bvalueMeta; exports.cantShiftM = _chunk4UU7WA7Ncjs.cantShiftM; exports.cantileverCut = _chunkWGTOBRYVcjs.cantileverCut; exports.cantileverMeta = _chunkWGTOBRYVcjs.cantileverMeta; exports.copperMeta = _chunkMTAYG3U2cjs.copperMeta; exports.creepageCheck = _chunkAVQ4F6DFcjs.creepageCheck; exports.creepageMeta = _chunkAVQ4F6DFcjs.creepageMeta; exports.crossSpanAnalyze = _chunkX25CXRVEcjs.crossSpanAnalyze; exports.crossSpanMeta = _chunkX25CXRVEcjs.crossSpanMeta; exports.curveStaggerCheck = _chunk4UU7WA7Ncjs.curveStaggerCheck; exports.curveStaggerMeta = _chunk4UU7WA7Ncjs.curveStaggerMeta; exports.deratedAmpacityA = _chunkNBFOB2PIcjs.deratedAmpacityA; exports.deriveLinearMassKgPerM = deriveLinearMassKgPerM; exports.dropperLengths = _chunkJ2UXRMTUcjs.dropperLengths; exports.dropperMeta = _chunkJ2UXRMTUcjs.dropperMeta; exports.dropperPositionsM = _chunkJ2UXRMTUcjs.dropperPositionsM; exports.elongationMM = _chunk5Q6IASB2cjs.elongationMM; exports.equivalentSpanM = _chunk3ERFRRHZcjs.equivalentSpanM; exports.findAmpacityA = findAmpacityA; exports.findWirePreset = findWirePreset; exports.forceMeta = _chunkRPKDEFSJcjs.forceMeta; exports.iceLoadNPerM = _chunkP6KUGPHDcjs.iceLoadNPerM; exports.icingCheck = _chunkP6KUGPHDcjs.icingCheck; exports.icingMeta = _chunkP6KUGPHDcjs.icingMeta; exports.kmHToMPerS = _chunkNBHEOJ5Acjs.kmHToMPerS; exports.maxParabolaSagM = _chunkJ2UXRMTUcjs.maxParabolaSagM; exports.maxSpanFromSagM = _chunkCF663UNGcjs.maxSpanFromSagM; exports.naturalFrequencyHz = _chunkNBHEOJ5Acjs.naturalFrequencyHz; exports.parabolaSagM = _chunkJ2UXRMTUcjs.parabolaSagM; exports.poleCapacityCheck = _chunkR4IVRYJAcjs.poleCapacityCheck; exports.poleCapacityMeta = _chunkR4IVRYJAcjs.poleCapacityMeta; exports.referenceTargetForceN = _chunkRPKDEFSJcjs.referenceTargetForceN; exports.requiredStrokeMM = _chunk5Q6IASB2cjs.requiredStrokeMM; exports.resistanceAtTempOhmPerKm = _chunkDGO2DCO5cjs.resistanceAtTempOhmPerKm; exports.sagM = _chunk3ERFRRHZcjs.sagM; exports.sagMM = _chunkCF663UNGcjs.sagMM; exports.sagMeta = _chunkCF663UNGcjs.sagMeta; exports.sectionFromDiameterMM2 = _chunk5INEDXRYcjs.sectionFromDiameterMM2; exports.shortCircuitCheck = _chunkNBFOB2PIcjs.shortCircuitCheck; exports.shortCircuitMinSectionMM2 = _chunkNBFOB2PIcjs.shortCircuitMinSectionMM2; exports.solveTensionN = _chunk3ERFRRHZcjs.solveTensionN; exports.stateCoefficientK = _chunk3ERFRRHZcjs.stateCoefficientK; exports.statisticalForcesN = _chunkRPKDEFSJcjs.statisticalForcesN; exports.steadyArmAngleDeg = _chunk57J7I6JAcjs.steadyArmAngleDeg; exports.steadyArmCheck = _chunk57J7I6JAcjs.steadyArmCheck; exports.steadyArmMeta = _chunk57J7I6JAcjs.steadyArmMeta; exports.strokeCheck = _chunk5Q6IASB2cjs.strokeCheck; exports.strokeMeta = _chunk5Q6IASB2cjs.strokeMeta; exports.tensionAt = _chunk3ERFRRHZcjs.tensionAt; exports.tensionCurve = _chunk3ERFRRHZcjs.tensionCurve; exports.tensionFromSagKN = _chunkCF663UNGcjs.tensionFromSagKN; exports.tensionMeta = _chunk3ERFRRHZcjs.tensionMeta; exports.unitWeightToKgPerM = unitWeightToKgPerM; exports.versineM = _chunk4UU7WA7Ncjs.versineM; exports.voltageDropCheck = _chunkRVP3IU2Lcjs.voltageDropCheck; exports.voltageDropMeta = _chunkRVP3IU2Lcjs.voltageDropMeta; exports.wavePropagationSpeedMPerS = _chunkNBHEOJ5Acjs.wavePropagationSpeedMPerS; exports.waveSpeedCheck = _chunkNBHEOJ5Acjs.waveSpeedCheck; exports.wavespeedMeta = _chunkNBHEOJ5Acjs.wavespeedMeta; exports.wearMeta = _chunk5INEDXRYcjs.wearMeta; exports.wearRatio = _chunk5INEDXRYcjs.wearRatio; exports.weightOfPresetNPerM = weightOfPresetNPerM; exports.weightPerLengthNPerM = weightPerLengthNPerM; exports.windClearanceCheck = _chunkFVESJBUDcjs.windClearanceCheck; exports.windDeflectionM = _chunkFVESJBUDcjs.windDeflectionM; exports.windLoadNPerM = _chunkFVESJBUDcjs.windLoadNPerM; exports.windMeta = _chunkFVESJBUDcjs.windMeta; exports.wireLookup = _chunkMTAYG3U2cjs.wireLookup;
+exports.AIR_DENSITY_KG_PER_M3 = _chunkFVESJBUDcjs.AIR_DENSITY_KG_PER_M3; exports.ASSEMBLY_TOLERANCE_MM = _chunkWGTOBRYVcjs.ASSEMBLY_TOLERANCE_MM; exports.CONVENTIONAL_MARGIN_MM = _chunkTXFBPGHRcjs.CONVENTIONAL_MARGIN_MM; exports.COPPER_ALLOY_ALPHA_PER_DEG_C = COPPER_ALLOY_ALPHA_PER_DEG_C; exports.COPPER_ALPHA_PER_DEG_C = _chunkDGO2DCO5cjs.COPPER_ALPHA_PER_DEG_C; exports.CREEPAGE_FLOOR_GENERAL = _chunkAVQ4F6DFcjs.CREEPAGE_FLOOR_GENERAL; exports.CREEPAGE_FLOOR_VCUT = _chunkAVQ4F6DFcjs.CREEPAGE_FLOOR_VCUT; exports.DEFAULT_BASE_AMBIENT_TEMP_DEG_C = _chunkNBFOB2PIcjs.DEFAULT_BASE_AMBIENT_TEMP_DEG_C; exports.DEFAULT_ICE_DENSITY_KG_PER_M3 = _chunkP6KUGPHDcjs.DEFAULT_ICE_DENSITY_KG_PER_M3; exports.DEFAULT_MIN_END_VOLTAGE_V = _chunkNSVETJYAcjs.DEFAULT_MIN_END_VOLTAGE_V; exports.DEFAULT_PANTOGRAPH_HEIGHT_M = _chunkVPW4T6YNcjs.DEFAULT_PANTOGRAPH_HEIGHT_M; exports.DEFAULT_REPLACEMENT_THRESHOLD_PERCENT = _chunk5INEDXRYcjs.DEFAULT_REPLACEMENT_THRESHOLD_PERCENT; exports.DEFAULT_WARN_THRESHOLD = _chunkNBHEOJ5Acjs.DEFAULT_WARN_THRESHOLD; exports.G0 = _chunkP6KUGPHDcjs.G0; exports.IACS_RESISTIVITY_OHM_MM2_PER_M = _chunkDGO2DCO5cjs.IACS_RESISTIVITY_OHM_MM2_PER_M; exports.MIN_MARGIN_MM = _chunkTXFBPGHRcjs.MIN_MARGIN_MM; exports.REFERENCE_DENSITY_G_PER_CM3 = REFERENCE_DENSITY_G_PER_CM3; exports.REF_TARGET_COEFF = _chunkRPKDEFSJcjs.REF_TARGET_COEFF; exports.REF_TARGET_OFFSET_N = _chunkRPKDEFSJcjs.REF_TARGET_OFFSET_N; exports.STANDARD_GAUGE_M = _chunkVPW4T6YNcjs.STANDARD_GAUGE_M; exports.STANDARD_UNIT_WEIGHT_KG_PER_KM = STANDARD_UNIT_WEIGHT_KG_PER_KM; exports.STEEL_POLE_SERIES_KNM = _chunkR4IVRYJAcjs.STEEL_POLE_SERIES_KNM; exports.TB2809_AMPACITY_A = TB2809_AMPACITY_A; exports.TB2809_WIRE_PARAMS = _chunkFRYBXJCMcjs.TB2809_WIRE_PARAMS; exports.TENSION_DIFF_RATIO = _chunkJJR7ROMGcjs.TENSION_DIFF_RATIO; exports.TEST_MOMENT_FACTOR = _chunkR4IVRYJAcjs.TEST_MOMENT_FACTOR; exports.TRANSMISSION_RATIOS = _chunkTXFBPGHRcjs.TRANSMISSION_RATIOS; exports.USCD_BANDS = _chunkAVQ4F6DFcjs.USCD_BANDS; exports.WIRE_PRESETS = WIRE_PRESETS; exports.ampacityDeratingFactor = _chunkNBFOB2PIcjs.ampacityDeratingFactor; exports.ampacityMeta = _chunkNBFOB2PIcjs.ampacityMeta; exports.anchorLengthCheck = _chunkJJR7ROMGcjs.anchorLengthCheck; exports.anchorLengthMeta = _chunkJJR7ROMGcjs.anchorLengthMeta; exports.assessContactForce = _chunkRPKDEFSJcjs.assessContactForce; exports.bValue = _chunkYGTESFOQcjs.bValue; exports.bvalueMeta = _chunkYGTESFOQcjs.bvalueMeta; exports.cantShiftM = _chunkVPW4T6YNcjs.cantShiftM; exports.cantileverCut = _chunkWGTOBRYVcjs.cantileverCut; exports.cantileverMeta = _chunkWGTOBRYVcjs.cantileverMeta; exports.copperMeta = _chunkFRYBXJCMcjs.copperMeta; exports.creepageCheck = _chunkAVQ4F6DFcjs.creepageCheck; exports.creepageMeta = _chunkAVQ4F6DFcjs.creepageMeta; exports.crossSpanAnalyze = _chunkDHJGNVCIcjs.crossSpanAnalyze; exports.crossSpanMeta = _chunkDHJGNVCIcjs.crossSpanMeta; exports.curveStaggerCheck = _chunkVPW4T6YNcjs.curveStaggerCheck; exports.curveStaggerMeta = _chunkVPW4T6YNcjs.curveStaggerMeta; exports.deratedAmpacityA = _chunkNBFOB2PIcjs.deratedAmpacityA; exports.deriveLinearMassKgPerM = deriveLinearMassKgPerM; exports.dropperLengths = _chunkFHPRIOTMcjs.dropperLengths; exports.dropperMeta = _chunkFHPRIOTMcjs.dropperMeta; exports.dropperPositionsM = _chunkFHPRIOTMcjs.dropperPositionsM; exports.elongationMM = _chunkTXFBPGHRcjs.elongationMM; exports.equivalentSpanM = _chunk3ERFRRHZcjs.equivalentSpanM; exports.findAmpacityA = findAmpacityA; exports.findWirePreset = findWirePreset; exports.forceMeta = _chunkRPKDEFSJcjs.forceMeta; exports.iceLoadNPerM = _chunkP6KUGPHDcjs.iceLoadNPerM; exports.icingCheck = _chunkP6KUGPHDcjs.icingCheck; exports.icingMeta = _chunkP6KUGPHDcjs.icingMeta; exports.kmHToMPerS = _chunkNBHEOJ5Acjs.kmHToMPerS; exports.maxParabolaSagM = _chunkFHPRIOTMcjs.maxParabolaSagM; exports.maxSpanFromSagM = _chunkCF663UNGcjs.maxSpanFromSagM; exports.naturalFrequencyHz = _chunkNBHEOJ5Acjs.naturalFrequencyHz; exports.parabolaSagM = _chunkFHPRIOTMcjs.parabolaSagM; exports.poleCapacityCheck = _chunkR4IVRYJAcjs.poleCapacityCheck; exports.poleCapacityMeta = _chunkR4IVRYJAcjs.poleCapacityMeta; exports.referenceTargetForceN = _chunkRPKDEFSJcjs.referenceTargetForceN; exports.requiredStrokeMM = _chunkTXFBPGHRcjs.requiredStrokeMM; exports.resistanceAtTempOhmPerKm = _chunkDGO2DCO5cjs.resistanceAtTempOhmPerKm; exports.sagM = _chunk3ERFRRHZcjs.sagM; exports.sagMM = _chunkCF663UNGcjs.sagMM; exports.sagMeta = _chunkCF663UNGcjs.sagMeta; exports.sectionFromDiameterMM2 = _chunk5INEDXRYcjs.sectionFromDiameterMM2; exports.shortCircuitCheck = _chunkNBFOB2PIcjs.shortCircuitCheck; exports.shortCircuitMinSectionMM2 = _chunkNBFOB2PIcjs.shortCircuitMinSectionMM2; exports.solveTensionN = _chunk3ERFRRHZcjs.solveTensionN; exports.stateCoefficientK = _chunk3ERFRRHZcjs.stateCoefficientK; exports.statisticalForcesN = _chunkRPKDEFSJcjs.statisticalForcesN; exports.steadyArmAngleDeg = _chunk57J7I6JAcjs.steadyArmAngleDeg; exports.steadyArmCheck = _chunk57J7I6JAcjs.steadyArmCheck; exports.steadyArmMeta = _chunk57J7I6JAcjs.steadyArmMeta; exports.strokeCheck = _chunkTXFBPGHRcjs.strokeCheck; exports.strokeMeta = _chunkTXFBPGHRcjs.strokeMeta; exports.tensionAt = _chunk3ERFRRHZcjs.tensionAt; exports.tensionCurve = _chunk3ERFRRHZcjs.tensionCurve; exports.tensionFromSagKN = _chunkCF663UNGcjs.tensionFromSagKN; exports.tensionMeta = _chunk3ERFRRHZcjs.tensionMeta; exports.unitWeightToKgPerM = unitWeightToKgPerM; exports.versineM = _chunkVPW4T6YNcjs.versineM; exports.voltageDropCheck = _chunkNSVETJYAcjs.voltageDropCheck; exports.voltageDropMeta = _chunkNSVETJYAcjs.voltageDropMeta; exports.wavePropagationSpeedMPerS = _chunkNBHEOJ5Acjs.wavePropagationSpeedMPerS; exports.waveSpeedCheck = _chunkNBHEOJ5Acjs.waveSpeedCheck; exports.wavespeedMeta = _chunkNBHEOJ5Acjs.wavespeedMeta; exports.wearMeta = _chunk5INEDXRYcjs.wearMeta; exports.wearRatio = _chunk5INEDXRYcjs.wearRatio; exports.weightOfPresetNPerM = weightOfPresetNPerM; exports.weightPerLengthNPerM = weightPerLengthNPerM; exports.windClearanceCheck = _chunkFVESJBUDcjs.windClearanceCheck; exports.windDeflectionM = _chunkFVESJBUDcjs.windDeflectionM; exports.windLoadNPerM = _chunkFVESJBUDcjs.windLoadNPerM; exports.windMeta = _chunkFVESJBUDcjs.windMeta; exports.wireLookup = _chunkFRYBXJCMcjs.wireLookup;
 //# sourceMappingURL=index.cjs.map

package/dist/index.cjs.map

@@ -1 +1 @@
-{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/index.cjs","../src/data/wire-specs.ts","../src/data/tb2809-ampacity.ts"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACF,wDAA6B;AAC7B;AACA;AC5FO,IAAM,4BAAA,EAA8B,IAAA;AAUpC,IAAM,+BAAA,EAAyE;AAAA,EACpF,OAAA,EAAS,IAAA;AAAA,EACT,OAAA,EAAS,IAAA;AAAA,EACT,OAAA,EAAS;AACX,CAAA;AAGO,SAAS,kBAAA,CAAmB,OAAA,EAAyB;AAC1D,EAAA,OAAO,QAAA,EAAU,GAAA;AACnB;AAYO,SAAS,sBAAA,CACd,eAAA,EACA,eAAA,EAAyB,2BAAA,EACjB;AAER,EAAA,OAAO,gBAAA,EAAkB,KAAA,EAAO,eAAA,EAAiB,GAAA;AACnD;AAGO,IAAM,6BAAA,EAA+B,KAAA;AAErC,IAAM,aAAA,EAAoC;AAAA,EAC/C;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E,CAAA;AAAA,EACA;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E,CAAA;AAAA,EACA;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E;AACF,CAAA;AAGO,SAAS,cAAA,CAAe,EAAA,EAAkC;AAC/D,EAAA,OAAO,YAAA,CAAa,IAAA,CAAK,CAAC,CAAA,EAAA,GAAM,CAAA,CAAE,GAAA,IAAO,EAAE,CAAA;AAC7C;AAMO,SAAS,oBAAA,CAAqB,gBAAA,EAAkC;AACrE,EAAA,OAAO,iBAAA,EAAmB,oBAAA;AAC5B;AAKO,SAAS,mBAAA,CAAoB,IAAA,EAAwB;AAC1D,EAAA,OAAO,oBAAA,CAAqB,IAAA,CAAK,gBAAgB,CAAA;AACnD;ADsDA;AACA;AEnJA,IAAM,EAAA,EAAI,CACR,IAAA,EACA,UAAA,EACA,QAAA,EACA,QAAA,EACA,SAAA,EACA,SAAA,EACA,UAAA,EAAA,GACoB;AACpB,EAAA,MAAM,WAAA,EAAuE;AAAA,IAC3E,CAAC,WAAA,EAAa,QAAQ,CAAA;AAAA,IACtB,CAAC,YAAA,EAAc,SAAS,CAAA;AAAA,IACxB,CAAC,YAAA,EAAc,SAAS,CAAA;AAAA,IACxB,CAAC,aAAA,EAAe,UAAU;AAAA,EAC5B,CAAA;AACA,EAAA,MAAM,IAAA,EAAuB,CAAC,CAAA;AAC9B,EAAA,IAAA,CAAA,MAAW,QAAA,GAAW,QAAA,EAAU;AAC9B,IAAA,IAAA,CAAA,MAAW,CAAC,SAAA,EAAW,IAAI,EAAA,GAAK,UAAA,EAAY;AAC1C,MAAA,MAAM,MAAA,EAAQ,QAAA,IAAY,IAAA,EAAM,IAAA,CAAK,CAAC,EAAA,EAAI,IAAA,CAAK,CAAC,CAAA;AAChD,MAAA,GAAA,CAAI,IAAA,CAAK;AAAA,QACP,IAAA;AAAA,QACA,UAAA;AAAA,QACA,eAAA,EAAiB,OAAA;AAAA,QACjB,SAAA;AAAA,QACA,SAAA,mBAAW,KAAA,UAAS;AAAA,MACtB,CAAC,CAAA;AAAA,IACH;AAAA,EACF;AACA,EAAA,OAAO,GAAA;AACT,CAAA;AAEO,IAAM,kBAAA,EAA8C;AAAA,EACzD,GAAG,CAAA,CAAE,IAAA,EAAM,QAAA,EAAK,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,IAAI,CAAA,EAAG,CAAC,IAAA,EAAM,IAAI,CAAC,CAAA;AAAA,EAC9E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,oBAAA,EAAO,CAAC,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAC;AAC/E,CAAA;AAMO,SAAS,aAAA,CAAc,MAAA,EAIA;AAC5B,EAAA,MAAM,IAAA,EAAM,iBAAA,CAAkB,IAAA;AAAA,IAC5B,CAAC,CAAA,EAAA,GACC,CAAA,CAAE,KAAA,IAAS,MAAA,CAAO,KAAA,GAClB,CAAA,CAAE,gBAAA,IAAoB,MAAA,CAAO,gBAAA,GAC7B,CAAA,CAAE,UAAA,IAAc,MAAA,CAAO;AAAA,EAC3B,CAAA;AACA,EAAA,OAAO,IAAA,IAAQ,KAAA,EAAA,EAAY,KAAA,EAAA,EAAY,GAAA,CAAI,SAAA;AAC7C;AFg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gqMAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/index.cjs","sourcesContent":[null,"import { G0 } from '../types';\n\n/**\n * 接触线线材参数预设。\n *\n * ⚠️ 全部为标称参考值，实际取值以产品技术条件与设计文件为准。\n * ⚠️ 本站计算器的参数界面支持手工覆盖这些值 —— 那才是工程上正确的用法。\n *\n * 自重口径（2026-08-31 已确定）：\n * 线密度取标准「参考单位质量」表值，而非由标称截面推算。标准表分两列：\n *   型号｜标称截面｜计算截面｜参考单位质量\n *   CT 120｜120｜121｜1082 kg/km\n *   注：参考单位质量按密度 8.94 g/cm³ 计算\n * 即标准的 8.94 g/cm³ 是配「计算截面」（把尺寸公差计入后的截面）用的，\n * 不是配「标称截面」用的：121 × 8.94 × 1e-3 = 1.0817 ≈ 1.082 kg/m。\n * 因此 CTMH-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，\n * 与站点 /calculator/tension/ 预设 rho=1.082、COPPER_TABLE.unitWeight=1082 一致。\n * 早期版本用标称截面 120 直接推算得 1.0728 kg/m，偏低约 0.85%，已废弃。\n *\n * 依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表；\n * CTMH/CTAH 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。\n */\n\nexport interface WireSpec {\n  /** 唯一标识 */\n  readonly id: WirePresetId;\n  /** 中文名 */\n  readonly name: string;\n  /** 英文名 */\n  readonly nameEn: string;\n  /** 标称截面积 A，mm² */\n  readonly crossSectionMM2: number;\n  /** 计算截面积，mm²（标准表列，自重按此值 × 8.94 g/cm³ 计） */\n  readonly calculatedSectionMM2: number;\n  /** 弹性模量 E，GPa（标称参考值） */\n  readonly elasticModulusGPa: number;\n  /** 线膨胀系数 α，1/℃（标称参考值） */\n  readonly expansionPerDegC: number;\n  /** 线密度，kg/m（标准参考单位质量） */\n  readonly linearMassKgPerM: number;\n}\n\n/** 参考密度，g/cm³（标准注：参考单位质量按此密度计） */\nexport const REFERENCE_DENSITY_G_PER_CM3 = 8.94;\n\n/** 线材预设 id */\nexport type WirePresetId = 'cthm120' | 'cthm150' | 'ctha120';\n\n/**\n * 标准「参考单位质量」表，kg/km。\n * 与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm 同源\n * （站点 /calculator/assets/calc-core.js 的 COPPER_TABLE）。\n */\nexport const STANDARD_UNIT_WEIGHT_KG_PER_KM: Readonly<Record<WirePresetId, number>> = {\n  cthm120: 1082,\n  cthm150: 1350,\n  ctha120: 1070,\n};\n\n/** 由标准参考单位质量换算线密度，kg/m */\nexport function unitWeightToKgPerM(kgPerKm: number): number {\n  return kgPerKm / 1000;\n}\n\n/**\n * 由截面积与密度反算线密度。\n *\n * ⚠️ 传入的必须是「计算截面」而非「标称截面」，否则结果偏低约 0.85%。\n * 120 mm² 标称对应计算截面 121 mm²；150 mm² 标称对应 151 mm²。\n *\n * @param crossSectionMM2 计算截面积，mm²\n * @param densityGPerCm3 密度，g/cm³\n * @returns 线密度，kg/m\n */\nexport function deriveLinearMassKgPerM(\n  crossSectionMM2: number,\n  densityGPerCm3: number = REFERENCE_DENSITY_G_PER_CM3,\n): number {\n  // A[mm²] × 1e-6 [m²/mm²] × ρ[g/cm³] × 1000 [kg/m³ per g/cm³]\n  return crossSectionMM2 * 1e-6 * densityGPerCm3 * 1000;\n}\n\n/** 铜及铜合金接触线的常用线膨胀系数，1/℃ */\nexport const COPPER_ALLOY_ALPHA_PER_DEG_C = 1.7e-5;\n\nexport const WIRE_PRESETS: readonly WireSpec[] = [\n  {\n    id: 'cthm120',\n    name: 'CTMH-120（铜镁 120）',\n    nameEn: 'CTMH-120 (CuMg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm120),\n  },\n  {\n    id: 'cthm150',\n    name: 'CTMH-150（铜镁 150）',\n    nameEn: 'CTMH-150 (CuMg 150 mm²)',\n    crossSectionMM2: 150,\n    calculatedSectionMM2: 151,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm150),\n  },\n  {\n    id: 'ctha120',\n    name: 'CTAH-120（铜银 120）',\n    nameEn: 'CTAH-120 (CuAg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.ctha120),\n  },\n];\n\n/** 按 id 取线材预设，找不到返回 undefined */\nexport function findWirePreset(id: string): WireSpec | undefined {\n  return WIRE_PRESETS.find((w) => w.id === id);\n}\n\n/**\n * 由线密度求单位自重荷载 g，N/m。\n * @param linearMassKgPerM 线密度，kg/m\n */\nexport function weightPerLengthNPerM(linearMassKgPerM: number): number {\n  return linearMassKgPerM * G0;\n}\n\n/**\n * 由线材预设直接取单位自重荷载 g，N/m。\n */\nexport function weightOfPresetNPerM(spec: WireSpec): number {\n  return weightPerLengthNPerM(spec.linearMassKgPerM);\n}\n","/**\n * TB/T 2809-2017 表5 持续载流量参考值（A）。\n *\n * 来源：itswe.com 标准规范库，据 TB/T 2809-2017 无水印全文扫描件逐格复核。\n *\n * 查表语义：\n *   - 返回数值：该项载流量\n *   - 返回 null：该 (材质， 截面) 规格存在，但该工况按标准原文注\"不需要考核\"\n *     （如纯铜接触线不考核 150℃ 工况）\n *   - 返回 undefined：该材质无此截面规格（如铜铬锆无 120 mm²）\n *\n * ⚠️ 表中为室内（无风无日照试验条件）值与室外值；工程取值请以标准原文与\n * 产品技术条件为准。高海拔、隧道内等场景须另行叠加散热修正。\n */\n\nexport type ContactWireTypeCode =\n  | 'CT'\n  | 'CTA'\n  | 'CTS'\n  | 'CTSM'\n  | 'CTSH'\n  | 'CTM'\n  | 'CTMM'\n  | 'CTMH'\n  | 'CTCZ';\n\n/** 载流量考核工况 */\nexport type AmpacityCondition = 'indoor-95' | 'outdoor-95' | 'indoor-150' | 'outdoor-150';\n\nexport type CrossSectionMM2 = 120 | 150;\n\n/** 按截面索引的载流量对，[120 mm², 150 mm²] */\ntype SectionPair = readonly [number | null, number | null];\n\nexport interface AmpacityEntry {\n  readonly type: ContactWireTypeCode;\n  readonly materialZh: string;\n  /** 标称截面，mm² */\n  readonly crossSectionMM2: CrossSectionMM2;\n  readonly condition: AmpacityCondition;\n  /** 持续载流量，A。null 表示该项不需要考核 */\n  readonly ampacityA: number | null;\n}\n\nconst M = (\n  type: ContactWireTypeCode,\n  materialZh: string,\n  sections: readonly CrossSectionMM2[],\n  indoor95: SectionPair,\n  outdoor95: SectionPair,\n  indoor150: SectionPair,\n  outdoor150: SectionPair,\n): AmpacityEntry[] => {\n  const conditions: ReadonlyArray<readonly [AmpacityCondition, SectionPair]> = [\n    ['indoor-95', indoor95],\n    ['outdoor-95', outdoor95],\n    ['indoor-150', indoor150],\n    ['outdoor-150', outdoor150],\n  ];\n  const out: AmpacityEntry[] = [];\n  for (const section of sections) {\n    for (const [condition, pair] of conditions) {\n      const value = section === 120 ? pair[0] : pair[1];\n      out.push({\n        type,\n        materialZh,\n        crossSectionMM2: section,\n        condition,\n        ampacityA: value ?? null,\n      });\n    }\n  }\n  return out;\n};\n\nexport const TB2809_AMPACITY_A: readonly AmpacityEntry[] = [\n  ...M('CT', '铜', [120, 150], [360, 425], [495, 570], [null, null], [null, null]),\n  ...M('CTA', '铜银', [120, 150], [360, 425], [495, 570], [515, 620], [680, 785]),\n  ...M('CTS', '铜锡', [120, 150], [360, 425], [490, 565], [515, 620], [680, 790]),\n  ...M('CTSM', '铜锡', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTSH', '铜锡', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTM', '铜镁', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTMM', '铜镁', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTMH', '铜镁', [120, 150], [300, 340], [410, 460], [430, 500], [560, 650]),\n  ...M('CTCZ', '铜铬锆', [150], [null, 395], [null, 505], [null, 580], [null, 710]),\n];\n\n/**\n * 查表。\n * @returns 载流量 A；该规格存在但不考核时为 null；该材质无此截面时为 undefined\n */\nexport function findAmpacityA(params: {\n  type: ContactWireTypeCode;\n  crossSectionMM2: CrossSectionMM2;\n  condition: AmpacityCondition;\n}): number | null | undefined {\n  const row = TB2809_AMPACITY_A.find(\n    (e) =>\n      e.type === params.type &&\n      e.crossSectionMM2 === params.crossSectionMM2 &&\n      e.condition === params.condition,\n  );\n  return row === undefined ? undefined : row.ampacityA;\n}\n"]}
+{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/index.cjs","../src/data/wire-specs.ts","../src/data/tb2809-ampacity.ts"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACA;AACA;AACA;AACF,wDAA6B;AAC7B;AACE;AACA;AACF,wDAA6B;AAC7B;AACA;AC5FO,IAAM,4BAAA,EAA8B,IAAA;AAUpC,IAAM,+BAAA,EAAyE;AAAA,EACpF,OAAA,EAAS,IAAA;AAAA,EACT,OAAA,EAAS,IAAA;AAAA,EACT,OAAA,EAAS;AACX,CAAA;AAGO,SAAS,kBAAA,CAAmB,OAAA,EAAyB;AAC1D,EAAA,OAAO,QAAA,EAAU,GAAA;AACnB;AAYO,SAAS,sBAAA,CACd,eAAA,EACA,eAAA,EAAyB,2BAAA,EACjB;AAER,EAAA,OAAO,gBAAA,EAAkB,KAAA,EAAO,eAAA,EAAiB,GAAA;AACnD;AAGO,IAAM,6BAAA,EAA+B,KAAA;AAErC,IAAM,aAAA,EAAoC;AAAA,EAC/C;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E,CAAA;AAAA,EACA;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA,IACtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E,CAAA;AAAA,EACA;AAAA,IACE,EAAA,EAAI,SAAA;AAAA,IACJ,IAAA,EAAM,sCAAA;AAAA,IACN,MAAA,EAAQ,4BAAA;AAAA,IACR,eAAA,EAAiB,GAAA;AAAA,IACjB,oBAAA,EAAsB,GAAA;AAAA;AAAA;AAAA,IAGtB,iBAAA,EAAmB,GAAA;AAAA,IACnB,gBAAA,EAAkB,4BAAA;AAAA,IAClB,gBAAA,EAAkB,kBAAA,CAAmB,8BAAA,CAA+B,OAAO;AAAA,EAC7E;AACF,CAAA;AAGO,SAAS,cAAA,CAAe,EAAA,EAAkC;AAC/D,EAAA,OAAO,YAAA,CAAa,IAAA,CAAK,CAAC,CAAA,EAAA,GAAM,CAAA,CAAE,GAAA,IAAO,EAAE,CAAA;AAC7C;AAMO,SAAS,oBAAA,CAAqB,gBAAA,EAAkC;AACrE,EAAA,OAAO,iBAAA,EAAmB,oBAAA;AAC5B;AAKO,SAAS,mBAAA,CAAoB,IAAA,EAAwB;AAC1D,EAAA,OAAO,oBAAA,CAAqB,IAAA,CAAK,gBAAgB,CAAA;AACnD;ADsDA;AACA;AElJA,IAAM,EAAA,EAAI,CACR,IAAA,EACA,UAAA,EACA,QAAA,EACA,QAAA,EACA,SAAA,EACA,SAAA,EACA,UAAA,EAAA,GACoB;AACpB,EAAA,MAAM,WAAA,EAAuE;AAAA,IAC3E,CAAC,WAAA,EAAa,QAAQ,CAAA;AAAA,IACtB,CAAC,YAAA,EAAc,SAAS,CAAA;AAAA,IACxB,CAAC,YAAA,EAAc,SAAS,CAAA;AAAA,IACxB,CAAC,aAAA,EAAe,UAAU;AAAA,EAC5B,CAAA;AACA,EAAA,MAAM,IAAA,EAAuB,CAAC,CAAA;AAC9B,EAAA,IAAA,CAAA,MAAW,QAAA,GAAW,QAAA,EAAU;AAC9B,IAAA,IAAA,CAAA,MAAW,CAAC,SAAA,EAAW,IAAI,EAAA,GAAK,UAAA,EAAY;AAC1C,MAAA,MAAM,MAAA,EAAQ,QAAA,IAAY,IAAA,EAAM,IAAA,CAAK,CAAC,EAAA,EAAI,IAAA,CAAK,CAAC,CAAA;AAChD,MAAA,GAAA,CAAI,IAAA,CAAK;AAAA,QACP,IAAA;AAAA,QACA,UAAA;AAAA,QACA,eAAA,EAAiB,OAAA;AAAA,QACjB,SAAA;AAAA,QACA,SAAA,mBAAW,KAAA,UAAS;AAAA,MACtB,CAAC,CAAA;AAAA,IACH;AAAA,EACF;AACA,EAAA,OAAO,GAAA;AACT,CAAA;AAEO,IAAM,kBAAA,EAA8C;AAAA,EACzD,GAAG,CAAA,CAAE,IAAA,EAAM,QAAA,EAAK,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,IAAI,CAAA,EAAG,CAAC,IAAA,EAAM,IAAI,CAAC,CAAA;AAAA,EAC9E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,KAAA,EAAO,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC5E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,cAAA,EAAM,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAA,EAAG,CAAC,GAAA,EAAK,GAAG,CAAC,CAAA;AAAA,EAC7E,GAAG,CAAA,CAAE,MAAA,EAAQ,oBAAA,EAAO,CAAC,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAA,EAAG,CAAC,IAAA,EAAM,GAAG,CAAC;AAC/E,CAAA;AAMO,SAAS,aAAA,CAAc,MAAA,EAIA;AAC5B,EAAA,MAAM,IAAA,EAAM,iBAAA,CAAkB,IAAA;AAAA,IAC5B,CAAC,CAAA,EAAA,GACC,CAAA,CAAE,KAAA,IAAS,MAAA,CAAO,KAAA,GAClB,CAAA,CAAE,gBAAA,IAAoB,MAAA,CAAO,gBAAA,GAC7B,CAAA,CAAE,UAAA,IAAc,MAAA,CAAO;AAAA,EAC3B,CAAA;AACA,EAAA,OAAO,IAAA,IAAQ,KAAA,EAAA,EAAY,KAAA,EAAA,EAAY,GAAA,CAAI,SAAA;AAC7C;AF+HA;AACE;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACA;AACF,gqMAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/index.cjs","sourcesContent":[null,"import { G0 } from '../types';\n\n/**\n * 接触线线材参数预设。\n *\n * ⚠️ 全部为标称参考值，实际取值以产品技术条件与设计文件为准。\n * ⚠️ 本站计算器的参数界面支持手工覆盖这些值 —— 那才是工程上正确的用法。\n *\n * 自重口径（2026-08-31 已确定）：\n * 线密度取标准「参考单位质量」表值，而非由标称截面推算。标准表分两列：\n *   型号｜标称截面｜计算截面｜参考单位质量\n *   CT 120｜120｜121｜1082 kg/km\n *   注：参考单位质量按密度 8.94 g/cm³ 计算\n * 即标准的 8.94 g/cm³ 是配「计算截面」（把尺寸公差计入后的截面）用的，\n * 不是配「标称截面」用的：121 × 8.94 × 1e-3 = 1.0817 ≈ 1.082 kg/m。\n * 因此 CTMH-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，\n * 与站点 /calculator/tension/ 预设 rho=1.082、COPPER_TABLE.unitWeight=1082 一致。\n * 早期版本用标称截面 120 直接推算得 1.0728 kg/m，偏低约 0.85%，已废弃。\n *\n * 依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表；\n * CTMH/CTAH 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。\n */\n\nexport interface WireSpec {\n  /** 唯一标识 */\n  readonly id: WirePresetId;\n  /** 中文名 */\n  readonly name: string;\n  /** 英文名 */\n  readonly nameEn: string;\n  /** 标称截面积 A，mm² */\n  readonly crossSectionMM2: number;\n  /** 计算截面积，mm²（标准表列，自重按此值 × 8.94 g/cm³ 计） */\n  readonly calculatedSectionMM2: number;\n  /** 弹性模量 E，GPa（标称参考值） */\n  readonly elasticModulusGPa: number;\n  /** 线膨胀系数 α，1/℃（标称参考值） */\n  readonly expansionPerDegC: number;\n  /** 线密度，kg/m（标准参考单位质量） */\n  readonly linearMassKgPerM: number;\n}\n\n/** 参考密度，g/cm³（标准注：参考单位质量按此密度计） */\nexport const REFERENCE_DENSITY_G_PER_CM3 = 8.94;\n\n/** 线材预设 id */\nexport type WirePresetId = 'cthm120' | 'cthm150' | 'ctha120';\n\n/**\n * 标准「参考单位质量」表，kg/km。\n * 与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm 同源\n * （站点 /calculator/assets/calc-core.js 的 COPPER_TABLE）。\n */\nexport const STANDARD_UNIT_WEIGHT_KG_PER_KM: Readonly<Record<WirePresetId, number>> = {\n  cthm120: 1082,\n  cthm150: 1350,\n  ctha120: 1070,\n};\n\n/** 由标准参考单位质量换算线密度，kg/m */\nexport function unitWeightToKgPerM(kgPerKm: number): number {\n  return kgPerKm / 1000;\n}\n\n/**\n * 由截面积与密度反算线密度。\n *\n * ⚠️ 传入的必须是「计算截面」而非「标称截面」，否则结果偏低约 0.85%。\n * 120 mm² 标称对应计算截面 121 mm²；150 mm² 标称对应 151 mm²。\n *\n * @param crossSectionMM2 计算截面积，mm²\n * @param densityGPerCm3 密度，g/cm³\n * @returns 线密度，kg/m\n */\nexport function deriveLinearMassKgPerM(\n  crossSectionMM2: number,\n  densityGPerCm3: number = REFERENCE_DENSITY_G_PER_CM3,\n): number {\n  // A[mm²] × 1e-6 [m²/mm²] × ρ[g/cm³] × 1000 [kg/m³ per g/cm³]\n  return crossSectionMM2 * 1e-6 * densityGPerCm3 * 1000;\n}\n\n/** 铜及铜合金接触线的常用线膨胀系数，1/℃ */\nexport const COPPER_ALLOY_ALPHA_PER_DEG_C = 1.7e-5;\n\nexport const WIRE_PRESETS: readonly WireSpec[] = [\n  {\n    id: 'cthm120',\n    name: 'CTMH-120（铜镁 120）',\n    nameEn: 'CTMH-120 (CuMg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm120),\n  },\n  {\n    id: 'cthm150',\n    name: 'CTMH-150（铜镁 150）',\n    nameEn: 'CTMH-150 (CuMg 150 mm²)',\n    crossSectionMM2: 150,\n    calculatedSectionMM2: 151,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm150),\n  },\n  {\n    id: 'ctha120',\n    name: 'CTAH-120（铜银 120）',\n    nameEn: 'CTAH-120 (CuAg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    // 铜银合金 E=117 GPa，对齐站点 /calculator/tension/ 预设（2026-09-19 审计更正，\n    // 旧值 120 误沿用铜镁档）\n    elasticModulusGPa: 117,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.ctha120),\n  },\n];\n\n/** 按 id 取线材预设，找不到返回 undefined */\nexport function findWirePreset(id: string): WireSpec | undefined {\n  return WIRE_PRESETS.find((w) => w.id === id);\n}\n\n/**\n * 由线密度求单位自重荷载 g，N/m。\n * @param linearMassKgPerM 线密度，kg/m\n */\nexport function weightPerLengthNPerM(linearMassKgPerM: number): number {\n  return linearMassKgPerM * G0;\n}\n\n/**\n * 由线材预设直接取单位自重荷载 g，N/m。\n */\nexport function weightOfPresetNPerM(spec: WireSpec): number {\n  return weightPerLengthNPerM(spec.linearMassKgPerM);\n}\n","/**\n * TB/T 2809-2017 表5 持续载流量参考值（A）。\n *\n * ⚠️ 2017 版表5 历史参考（全 9 材质）；2026 版现行口径见 TB2809_WIRE_PARAMS\n * 双字段（src/copper/index.ts：ampacityIndoor150A 主值 / ampacityIndoor150A2017 对照）。\n *\n * 来源：itswe.com 标准规范库，据 TB/T 2809-2017 无水印全文扫描件逐格复核。\n *\n * 查表语义：\n *   - 返回数值：该项载流量\n *   - 返回 null：该 (材质， 截面) 规格存在，但该工况按标准原文注\"不需要考核\"\n *     （如纯铜接触线不考核 150℃ 工况）\n *   - 返回 undefined：该材质无此截面规格（如铜铬锆无 120 mm²）\n *\n * ⚠️ 表中为室内（无风无日照试验条件）值与室外值；工程取值请以标准原文与\n * 产品技术条件为准。高海拔、隧道内等场景须另行叠加散热修正。\n */\n\nexport type ContactWireTypeCode =\n  | 'CT'\n  | 'CTA'\n  | 'CTS'\n  | 'CTSM'\n  | 'CTSH'\n  | 'CTM'\n  | 'CTMM'\n  | 'CTMH'\n  | 'CTCZ';\n\n/** 载流量考核工况 */\nexport type AmpacityCondition = 'indoor-95' | 'outdoor-95' | 'indoor-150' | 'outdoor-150';\n\nexport type CrossSectionMM2 = 120 | 150;\n\n/** 按截面索引的载流量对，[120 mm², 150 mm²] */\ntype SectionPair = readonly [number | null, number | null];\n\nexport interface AmpacityEntry {\n  readonly type: ContactWireTypeCode;\n  readonly materialZh: string;\n  /** 标称截面，mm² */\n  readonly crossSectionMM2: CrossSectionMM2;\n  readonly condition: AmpacityCondition;\n  /** 持续载流量，A。null 表示该项不需要考核 */\n  readonly ampacityA: number | null;\n}\n\nconst M = (\n  type: ContactWireTypeCode,\n  materialZh: string,\n  sections: readonly CrossSectionMM2[],\n  indoor95: SectionPair,\n  outdoor95: SectionPair,\n  indoor150: SectionPair,\n  outdoor150: SectionPair,\n): AmpacityEntry[] => {\n  const conditions: ReadonlyArray<readonly [AmpacityCondition, SectionPair]> = [\n    ['indoor-95', indoor95],\n    ['outdoor-95', outdoor95],\n    ['indoor-150', indoor150],\n    ['outdoor-150', outdoor150],\n  ];\n  const out: AmpacityEntry[] = [];\n  for (const section of sections) {\n    for (const [condition, pair] of conditions) {\n      const value = section === 120 ? pair[0] : pair[1];\n      out.push({\n        type,\n        materialZh,\n        crossSectionMM2: section,\n        condition,\n        ampacityA: value ?? null,\n      });\n    }\n  }\n  return out;\n};\n\nexport const TB2809_AMPACITY_A: readonly AmpacityEntry[] = [\n  ...M('CT', '铜', [120, 150], [360, 425], [495, 570], [null, null], [null, null]),\n  ...M('CTA', '铜银', [120, 150], [360, 425], [495, 570], [515, 620], [680, 785]),\n  ...M('CTS', '铜锡', [120, 150], [360, 425], [490, 565], [515, 620], [680, 790]),\n  ...M('CTSM', '铜锡', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTSH', '铜锡', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTM', '铜镁', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTMM', '铜镁', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTMH', '铜镁', [120, 150], [300, 340], [410, 460], [430, 500], [560, 650]),\n  ...M('CTCZ', '铜铬锆', [150], [null, 395], [null, 505], [null, 580], [null, 710]),\n];\n\n/**\n * 查表。\n * @returns 载流量 A；该规格存在但不考核时为 null；该材质无此截面时为 undefined\n */\nexport function findAmpacityA(params: {\n  type: ContactWireTypeCode;\n  crossSectionMM2: CrossSectionMM2;\n  condition: AmpacityCondition;\n}): number | null | undefined {\n  const row = TB2809_AMPACITY_A.find(\n    (e) =>\n      e.type === params.type &&\n      e.crossSectionMM2 === params.crossSectionMM2 &&\n      e.condition === params.condition,\n  );\n  return row === undefined ? undefined : row.ampacityA;\n}\n"]}

package/dist/index.d.cts

@@ -144,6 +144,9 @@ declare function weightOfPresetNPerM(spec: WireSpec): number;
 /**
  * TB/T 2809-2017 表5 持续载流量参考值（A）。
  *
+ * ⚠️ 2017 版表5 历史参考（全 9 材质）；2026 版现行口径见 TB2809_WIRE_PARAMS
+ * 双字段（src/copper/index.ts：ampacityIndoor150A 主值 / ampacityIndoor150A2017 对照）。
+ *
  * 来源：itswe.com 标准规范库，据 TB/T 2809-2017 无水印全文扫描件逐格复核。
  *
  * 查表语义：

package/dist/index.d.ts

@@ -144,6 +144,9 @@ declare function weightOfPresetNPerM(spec: WireSpec): number;
 /**
  * TB/T 2809-2017 表5 持续载流量参考值（A）。
  *
+ * ⚠️ 2017 版表5 历史参考（全 9 材质）；2026 版现行口径见 TB2809_WIRE_PARAMS
+ * 双字段（src/copper/index.ts：ampacityIndoor150A 主值 / ampacityIndoor150A2017 对照）。
+ *
  * 来源：itswe.com 标准规范库，据 TB/T 2809-2017 无水印全文扫描件逐格复核。
  *
  * 查表语义：

package/dist/index.js

@@ -11,7 +11,7 @@ import {
   DEFAULT_MIN_END_VOLTAGE_V,
   voltageDropCheck,
   voltageDropMeta
-} from "./chunk-IUENDAAJ.js";
+} from "./chunk-53ONNIVL.js";
 import {
   DEFAULT_WARN_THRESHOLD,
   kmHToMPerS,
@@ -40,14 +40,14 @@ import {
   curveStaggerCheck,
   curveStaggerMeta,
   versineM
-} from "./chunk-IFVYGNT3.js";
+} from "./chunk-XRSWKYS6.js";
 import {
   dropperLengths,
   dropperMeta,
   dropperPositionsM,
   maxParabolaSagM,
   parabolaSagM
-} from "./chunk-UO2PHBC3.js";
+} from "./chunk-XQBTMD7W.js";
 import {
   REF_TARGET_COEFF,
   REF_TARGET_OFFSET_N,
@@ -88,7 +88,7 @@ import {
   requiredStrokeMM,
   strokeCheck,
   strokeMeta
-} from "./chunk-KOSC6EA3.js";
+} from "./chunk-G5ZI24PW.js";
 import {
   DEFAULT_BASE_AMBIENT_TEMP_DEG_C,
   ampacityDeratingFactor,
@@ -105,7 +105,7 @@ import {
 import {
   bValue,
   bvalueMeta
-} from "./chunk-3GREMF76.js";
+} from "./chunk-DN6BVPCQ.js";
 import {
   ASSEMBLY_TOLERANCE_MM,
   cantileverCut,
@@ -115,7 +115,7 @@ import {
   TB2809_WIRE_PARAMS,
   copperMeta,
   wireLookup
-} from "./chunk-IQR3SRCD.js";
+} from "./chunk-ES3AQ52A.js";
 import {
   COPPER_ALPHA_PER_DEG_C,
   IACS_RESISTIVITY_OHM_MM2_PER_M,
@@ -131,7 +131,7 @@ import {
 import {
   crossSpanAnalyze,
   crossSpanMeta
-} from "./chunk-D5F5ES2R.js";
+} from "./chunk-2HYOBL6M.js";
 
 // src/data/wire-specs.ts
 var REFERENCE_DENSITY_G_PER_CM3 = 8.94;
@@ -174,7 +174,9 @@ var WIRE_PRESETS = [
     nameEn: "CTAH-120 (CuAg 120 mm\xB2)",
     crossSectionMM2: 120,
     calculatedSectionMM2: 121,
-    elasticModulusGPa: 120,
+    // 铜银合金 E=117 GPa，对齐站点 /calculator/tension/ 预设（2026-09-19 审计更正，
+    // 旧值 120 误沿用铜镁档）
+    elasticModulusGPa: 117,
     expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,
     linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.ctha120)
   }

package/dist/index.js.map

@@ -1 +1 @@
-{"version":3,"sources":["../src/data/wire-specs.ts","../src/data/tb2809-ampacity.ts"],"sourcesContent":["import { G0 } from '../types';\n\n/**\n * 接触线线材参数预设。\n *\n * ⚠️ 全部为标称参考值，实际取值以产品技术条件与设计文件为准。\n * ⚠️ 本站计算器的参数界面支持手工覆盖这些值 —— 那才是工程上正确的用法。\n *\n * 自重口径（2026-08-31 已确定）：\n * 线密度取标准「参考单位质量」表值，而非由标称截面推算。标准表分两列：\n *   型号｜标称截面｜计算截面｜参考单位质量\n *   CT 120｜120｜121｜1082 kg/km\n *   注：参考单位质量按密度 8.94 g/cm³ 计算\n * 即标准的 8.94 g/cm³ 是配「计算截面」（把尺寸公差计入后的截面）用的，\n * 不是配「标称截面」用的：121 × 8.94 × 1e-3 = 1.0817 ≈ 1.082 kg/m。\n * 因此 CTMH-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，\n * 与站点 /calculator/tension/ 预设 rho=1.082、COPPER_TABLE.unitWeight=1082 一致。\n * 早期版本用标称截面 120 直接推算得 1.0728 kg/m，偏低约 0.85%，已废弃。\n *\n * 依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表；\n * CTMH/CTAH 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。\n */\n\nexport interface WireSpec {\n  /** 唯一标识 */\n  readonly id: WirePresetId;\n  /** 中文名 */\n  readonly name: string;\n  /** 英文名 */\n  readonly nameEn: string;\n  /** 标称截面积 A，mm² */\n  readonly crossSectionMM2: number;\n  /** 计算截面积，mm²（标准表列，自重按此值 × 8.94 g/cm³ 计） */\n  readonly calculatedSectionMM2: number;\n  /** 弹性模量 E，GPa（标称参考值） */\n  readonly elasticModulusGPa: number;\n  /** 线膨胀系数 α，1/℃（标称参考值） */\n  readonly expansionPerDegC: number;\n  /** 线密度，kg/m（标准参考单位质量） */\n  readonly linearMassKgPerM: number;\n}\n\n/** 参考密度，g/cm³（标准注：参考单位质量按此密度计） */\nexport const REFERENCE_DENSITY_G_PER_CM3 = 8.94;\n\n/** 线材预设 id */\nexport type WirePresetId = 'cthm120' | 'cthm150' | 'ctha120';\n\n/**\n * 标准「参考单位质量」表，kg/km。\n * 与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm 同源\n * （站点 /calculator/assets/calc-core.js 的 COPPER_TABLE）。\n */\nexport const STANDARD_UNIT_WEIGHT_KG_PER_KM: Readonly<Record<WirePresetId, number>> = {\n  cthm120: 1082,\n  cthm150: 1350,\n  ctha120: 1070,\n};\n\n/** 由标准参考单位质量换算线密度，kg/m */\nexport function unitWeightToKgPerM(kgPerKm: number): number {\n  return kgPerKm / 1000;\n}\n\n/**\n * 由截面积与密度反算线密度。\n *\n * ⚠️ 传入的必须是「计算截面」而非「标称截面」，否则结果偏低约 0.85%。\n * 120 mm² 标称对应计算截面 121 mm²；150 mm² 标称对应 151 mm²。\n *\n * @param crossSectionMM2 计算截面积，mm²\n * @param densityGPerCm3 密度，g/cm³\n * @returns 线密度，kg/m\n */\nexport function deriveLinearMassKgPerM(\n  crossSectionMM2: number,\n  densityGPerCm3: number = REFERENCE_DENSITY_G_PER_CM3,\n): number {\n  // A[mm²] × 1e-6 [m²/mm²] × ρ[g/cm³] × 1000 [kg/m³ per g/cm³]\n  return crossSectionMM2 * 1e-6 * densityGPerCm3 * 1000;\n}\n\n/** 铜及铜合金接触线的常用线膨胀系数，1/℃ */\nexport const COPPER_ALLOY_ALPHA_PER_DEG_C = 1.7e-5;\n\nexport const WIRE_PRESETS: readonly WireSpec[] = [\n  {\n    id: 'cthm120',\n    name: 'CTMH-120（铜镁 120）',\n    nameEn: 'CTMH-120 (CuMg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm120),\n  },\n  {\n    id: 'cthm150',\n    name: 'CTMH-150（铜镁 150）',\n    nameEn: 'CTMH-150 (CuMg 150 mm²)',\n    crossSectionMM2: 150,\n    calculatedSectionMM2: 151,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm150),\n  },\n  {\n    id: 'ctha120',\n    name: 'CTAH-120（铜银 120）',\n    nameEn: 'CTAH-120 (CuAg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.ctha120),\n  },\n];\n\n/** 按 id 取线材预设，找不到返回 undefined */\nexport function findWirePreset(id: string): WireSpec | undefined {\n  return WIRE_PRESETS.find((w) => w.id === id);\n}\n\n/**\n * 由线密度求单位自重荷载 g，N/m。\n * @param linearMassKgPerM 线密度，kg/m\n */\nexport function weightPerLengthNPerM(linearMassKgPerM: number): number {\n  return linearMassKgPerM * G0;\n}\n\n/**\n * 由线材预设直接取单位自重荷载 g，N/m。\n */\nexport function weightOfPresetNPerM(spec: WireSpec): number {\n  return weightPerLengthNPerM(spec.linearMassKgPerM);\n}\n","/**\n * TB/T 2809-2017 表5 持续载流量参考值（A）。\n *\n * 来源：itswe.com 标准规范库，据 TB/T 2809-2017 无水印全文扫描件逐格复核。\n *\n * 查表语义：\n *   - 返回数值：该项载流量\n *   - 返回 null：该 (材质， 截面) 规格存在，但该工况按标准原文注\"不需要考核\"\n *     （如纯铜接触线不考核 150℃ 工况）\n *   - 返回 undefined：该材质无此截面规格（如铜铬锆无 120 mm²）\n *\n * ⚠️ 表中为室内（无风无日照试验条件）值与室外值；工程取值请以标准原文与\n * 产品技术条件为准。高海拔、隧道内等场景须另行叠加散热修正。\n */\n\nexport type ContactWireTypeCode =\n  | 'CT'\n  | 'CTA'\n  | 'CTS'\n  | 'CTSM'\n  | 'CTSH'\n  | 'CTM'\n  | 'CTMM'\n  | 'CTMH'\n  | 'CTCZ';\n\n/** 载流量考核工况 */\nexport type AmpacityCondition = 'indoor-95' | 'outdoor-95' | 'indoor-150' | 'outdoor-150';\n\nexport type CrossSectionMM2 = 120 | 150;\n\n/** 按截面索引的载流量对，[120 mm², 150 mm²] */\ntype SectionPair = readonly [number | null, number | null];\n\nexport interface AmpacityEntry {\n  readonly type: ContactWireTypeCode;\n  readonly materialZh: string;\n  /** 标称截面，mm² */\n  readonly crossSectionMM2: CrossSectionMM2;\n  readonly condition: AmpacityCondition;\n  /** 持续载流量，A。null 表示该项不需要考核 */\n  readonly ampacityA: number | null;\n}\n\nconst M = (\n  type: ContactWireTypeCode,\n  materialZh: string,\n  sections: readonly CrossSectionMM2[],\n  indoor95: SectionPair,\n  outdoor95: SectionPair,\n  indoor150: SectionPair,\n  outdoor150: SectionPair,\n): AmpacityEntry[] => {\n  const conditions: ReadonlyArray<readonly [AmpacityCondition, SectionPair]> = [\n    ['indoor-95', indoor95],\n    ['outdoor-95', outdoor95],\n    ['indoor-150', indoor150],\n    ['outdoor-150', outdoor150],\n  ];\n  const out: AmpacityEntry[] = [];\n  for (const section of sections) {\n    for (const [condition, pair] of conditions) {\n      const value = section === 120 ? pair[0] : pair[1];\n      out.push({\n        type,\n        materialZh,\n        crossSectionMM2: section,\n        condition,\n        ampacityA: value ?? null,\n      });\n    }\n  }\n  return out;\n};\n\nexport const TB2809_AMPACITY_A: readonly AmpacityEntry[] = [\n  ...M('CT', '铜', [120, 150], [360, 425], [495, 570], [null, null], [null, null]),\n  ...M('CTA', '铜银', [120, 150], [360, 425], [495, 570], [515, 620], [680, 785]),\n  ...M('CTS', '铜锡', [120, 150], [360, 425], [490, 565], [515, 620], [680, 790]),\n  ...M('CTSM', '铜锡', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTSH', '铜锡', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTM', '铜镁', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTMM', '铜镁', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTMH', '铜镁', [120, 150], [300, 340], [410, 460], [430, 500], [560, 650]),\n  ...M('CTCZ', '铜铬锆', [150], [null, 395], [null, 505], [null, 580], [null, 710]),\n];\n\n/**\n * 查表。\n * @returns 载流量 A；该规格存在但不考核时为 null；该材质无此截面时为 undefined\n */\nexport function findAmpacityA(params: {\n  type: ContactWireTypeCode;\n  crossSectionMM2: CrossSectionMM2;\n  condition: AmpacityCondition;\n}): number | null | undefined {\n  const row = TB2809_AMPACITY_A.find(\n    (e) =>\n      e.type === params.type &&\n      e.crossSectionMM2 === params.crossSectionMM2 &&\n      e.condition === params.condition,\n  );\n  return row === undefined ? undefined : row.ampacityA;\n}\n"],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AA2CO,IAAM,8BAA8B;AAUpC,IAAM,iCAAyE;AAAA,EACpF,SAAS;AAAA,EACT,SAAS;AAAA,EACT,SAAS;AACX;AAGO,SAAS,mBAAmB,SAAyB;AAC1D,SAAO,UAAU;AACnB;AAYO,SAAS,uBACd,iBACA,iBAAyB,6BACjB;AAER,SAAO,kBAAkB,OAAO,iBAAiB;AACnD;AAGO,IAAM,+BAA+B;AAErC,IAAM,eAAoC;AAAA,EAC/C;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AAAA,EACA;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AAAA,EACA;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AACF;AAGO,SAAS,eAAe,IAAkC;AAC/D,SAAO,aAAa,KAAK,CAAC,MAAM,EAAE,OAAO,EAAE;AAC7C;AAMO,SAAS,qBAAqB,kBAAkC;AACrE,SAAO,mBAAmB;AAC5B;AAKO,SAAS,oBAAoB,MAAwB;AAC1D,SAAO,qBAAqB,KAAK,gBAAgB;AACnD;;;AC5FA,IAAM,IAAI,CACR,MACA,YACA,UACA,UACA,WACA,WACA,eACoB;AACpB,QAAM,aAAuE;AAAA,IAC3E,CAAC,aAAa,QAAQ;AAAA,IACtB,CAAC,cAAc,SAAS;AAAA,IACxB,CAAC,cAAc,SAAS;AAAA,IACxB,CAAC,eAAe,UAAU;AAAA,EAC5B;AACA,QAAM,MAAuB,CAAC;AAC9B,aAAW,WAAW,UAAU;AAC9B,eAAW,CAAC,WAAW,IAAI,KAAK,YAAY;AAC1C,YAAM,QAAQ,YAAY,MAAM,KAAK,CAAC,IAAI,KAAK,CAAC;AAChD,UAAI,KAAK;AAAA,QACP;AAAA,QACA;AAAA,QACA,iBAAiB;AAAA,QACjB;AAAA,QACA,WAAW,SAAS;AAAA,MACtB,CAAC;AAAA,IACH;AAAA,EACF;AACA,SAAO;AACT;AAEO,IAAM,oBAA8C;AAAA,EACzD,GAAG,EAAE,MAAM,UAAK,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,MAAM,IAAI,GAAG,CAAC,MAAM,IAAI,CAAC;AAAA,EAC9E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,sBAAO,CAAC,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,CAAC;AAC/E;AAMO,SAAS,cAAc,QAIA;AAC5B,QAAM,MAAM,kBAAkB;AAAA,IAC5B,CAAC,MACC,EAAE,SAAS,OAAO,QAClB,EAAE,oBAAoB,OAAO,mBAC7B,EAAE,cAAc,OAAO;AAAA,EAC3B;AACA,SAAO,QAAQ,SAAY,SAAY,IAAI;AAC7C;","names":[]}
+{"version":3,"sources":["../src/data/wire-specs.ts","../src/data/tb2809-ampacity.ts"],"sourcesContent":["import { G0 } from '../types';\n\n/**\n * 接触线线材参数预设。\n *\n * ⚠️ 全部为标称参考值，实际取值以产品技术条件与设计文件为准。\n * ⚠️ 本站计算器的参数界面支持手工覆盖这些值 —— 那才是工程上正确的用法。\n *\n * 自重口径（2026-08-31 已确定）：\n * 线密度取标准「参考单位质量」表值，而非由标称截面推算。标准表分两列：\n *   型号｜标称截面｜计算截面｜参考单位质量\n *   CT 120｜120｜121｜1082 kg/km\n *   注：参考单位质量按密度 8.94 g/cm³ 计算\n * 即标准的 8.94 g/cm³ 是配「计算截面」（把尺寸公差计入后的截面）用的，\n * 不是配「标称截面」用的：121 × 8.94 × 1e-3 = 1.0817 ≈ 1.082 kg/m。\n * 因此 CTMH-120 自重 g = 1.082 × 9.81 = 10.61442 N/m，\n * 与站点 /calculator/tension/ 预设 rho=1.082、COPPER_TABLE.unitWeight=1082 一致。\n * 早期版本用标称截面 120 直接推算得 1.0728 kg/m，偏低约 0.85%，已废弃。\n *\n * 依据：TB/T 2810-2017（纯铜）、TB/T 2821-2017（铜银）规格尺寸表；\n * CTMH/CTAH 型号口径与 TB/T 2809-2017 的对应关系见 copper 模块 note 字段。\n */\n\nexport interface WireSpec {\n  /** 唯一标识 */\n  readonly id: WirePresetId;\n  /** 中文名 */\n  readonly name: string;\n  /** 英文名 */\n  readonly nameEn: string;\n  /** 标称截面积 A，mm² */\n  readonly crossSectionMM2: number;\n  /** 计算截面积，mm²（标准表列，自重按此值 × 8.94 g/cm³ 计） */\n  readonly calculatedSectionMM2: number;\n  /** 弹性模量 E，GPa（标称参考值） */\n  readonly elasticModulusGPa: number;\n  /** 线膨胀系数 α，1/℃（标称参考值） */\n  readonly expansionPerDegC: number;\n  /** 线密度，kg/m（标准参考单位质量） */\n  readonly linearMassKgPerM: number;\n}\n\n/** 参考密度，g/cm³（标准注：参考单位质量按此密度计） */\nexport const REFERENCE_DENSITY_G_PER_CM3 = 8.94;\n\n/** 线材预设 id */\nexport type WirePresetId = 'cthm120' | 'cthm150' | 'ctha120';\n\n/**\n * 标准「参考单位质量」表，kg/km。\n * 与 `src/copper/index.ts` 的 TB2809_WIRE_PARAMS.unitWeightKgPerKm 同源\n * （站点 /calculator/assets/calc-core.js 的 COPPER_TABLE）。\n */\nexport const STANDARD_UNIT_WEIGHT_KG_PER_KM: Readonly<Record<WirePresetId, number>> = {\n  cthm120: 1082,\n  cthm150: 1350,\n  ctha120: 1070,\n};\n\n/** 由标准参考单位质量换算线密度，kg/m */\nexport function unitWeightToKgPerM(kgPerKm: number): number {\n  return kgPerKm / 1000;\n}\n\n/**\n * 由截面积与密度反算线密度。\n *\n * ⚠️ 传入的必须是「计算截面」而非「标称截面」，否则结果偏低约 0.85%。\n * 120 mm² 标称对应计算截面 121 mm²；150 mm² 标称对应 151 mm²。\n *\n * @param crossSectionMM2 计算截面积，mm²\n * @param densityGPerCm3 密度，g/cm³\n * @returns 线密度，kg/m\n */\nexport function deriveLinearMassKgPerM(\n  crossSectionMM2: number,\n  densityGPerCm3: number = REFERENCE_DENSITY_G_PER_CM3,\n): number {\n  // A[mm²] × 1e-6 [m²/mm²] × ρ[g/cm³] × 1000 [kg/m³ per g/cm³]\n  return crossSectionMM2 * 1e-6 * densityGPerCm3 * 1000;\n}\n\n/** 铜及铜合金接触线的常用线膨胀系数，1/℃ */\nexport const COPPER_ALLOY_ALPHA_PER_DEG_C = 1.7e-5;\n\nexport const WIRE_PRESETS: readonly WireSpec[] = [\n  {\n    id: 'cthm120',\n    name: 'CTMH-120（铜镁 120）',\n    nameEn: 'CTMH-120 (CuMg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm120),\n  },\n  {\n    id: 'cthm150',\n    name: 'CTMH-150（铜镁 150）',\n    nameEn: 'CTMH-150 (CuMg 150 mm²)',\n    crossSectionMM2: 150,\n    calculatedSectionMM2: 151,\n    elasticModulusGPa: 120,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.cthm150),\n  },\n  {\n    id: 'ctha120',\n    name: 'CTAH-120（铜银 120）',\n    nameEn: 'CTAH-120 (CuAg 120 mm²)',\n    crossSectionMM2: 120,\n    calculatedSectionMM2: 121,\n    // 铜银合金 E=117 GPa，对齐站点 /calculator/tension/ 预设（2026-09-19 审计更正，\n    // 旧值 120 误沿用铜镁档）\n    elasticModulusGPa: 117,\n    expansionPerDegC: COPPER_ALLOY_ALPHA_PER_DEG_C,\n    linearMassKgPerM: unitWeightToKgPerM(STANDARD_UNIT_WEIGHT_KG_PER_KM.ctha120),\n  },\n];\n\n/** 按 id 取线材预设，找不到返回 undefined */\nexport function findWirePreset(id: string): WireSpec | undefined {\n  return WIRE_PRESETS.find((w) => w.id === id);\n}\n\n/**\n * 由线密度求单位自重荷载 g，N/m。\n * @param linearMassKgPerM 线密度，kg/m\n */\nexport function weightPerLengthNPerM(linearMassKgPerM: number): number {\n  return linearMassKgPerM * G0;\n}\n\n/**\n * 由线材预设直接取单位自重荷载 g，N/m。\n */\nexport function weightOfPresetNPerM(spec: WireSpec): number {\n  return weightPerLengthNPerM(spec.linearMassKgPerM);\n}\n","/**\n * TB/T 2809-2017 表5 持续载流量参考值（A）。\n *\n * ⚠️ 2017 版表5 历史参考（全 9 材质）；2026 版现行口径见 TB2809_WIRE_PARAMS\n * 双字段（src/copper/index.ts：ampacityIndoor150A 主值 / ampacityIndoor150A2017 对照）。\n *\n * 来源：itswe.com 标准规范库，据 TB/T 2809-2017 无水印全文扫描件逐格复核。\n *\n * 查表语义：\n *   - 返回数值：该项载流量\n *   - 返回 null：该 (材质， 截面) 规格存在，但该工况按标准原文注\"不需要考核\"\n *     （如纯铜接触线不考核 150℃ 工况）\n *   - 返回 undefined：该材质无此截面规格（如铜铬锆无 120 mm²）\n *\n * ⚠️ 表中为室内（无风无日照试验条件）值与室外值；工程取值请以标准原文与\n * 产品技术条件为准。高海拔、隧道内等场景须另行叠加散热修正。\n */\n\nexport type ContactWireTypeCode =\n  | 'CT'\n  | 'CTA'\n  | 'CTS'\n  | 'CTSM'\n  | 'CTSH'\n  | 'CTM'\n  | 'CTMM'\n  | 'CTMH'\n  | 'CTCZ';\n\n/** 载流量考核工况 */\nexport type AmpacityCondition = 'indoor-95' | 'outdoor-95' | 'indoor-150' | 'outdoor-150';\n\nexport type CrossSectionMM2 = 120 | 150;\n\n/** 按截面索引的载流量对，[120 mm², 150 mm²] */\ntype SectionPair = readonly [number | null, number | null];\n\nexport interface AmpacityEntry {\n  readonly type: ContactWireTypeCode;\n  readonly materialZh: string;\n  /** 标称截面，mm² */\n  readonly crossSectionMM2: CrossSectionMM2;\n  readonly condition: AmpacityCondition;\n  /** 持续载流量，A。null 表示该项不需要考核 */\n  readonly ampacityA: number | null;\n}\n\nconst M = (\n  type: ContactWireTypeCode,\n  materialZh: string,\n  sections: readonly CrossSectionMM2[],\n  indoor95: SectionPair,\n  outdoor95: SectionPair,\n  indoor150: SectionPair,\n  outdoor150: SectionPair,\n): AmpacityEntry[] => {\n  const conditions: ReadonlyArray<readonly [AmpacityCondition, SectionPair]> = [\n    ['indoor-95', indoor95],\n    ['outdoor-95', outdoor95],\n    ['indoor-150', indoor150],\n    ['outdoor-150', outdoor150],\n  ];\n  const out: AmpacityEntry[] = [];\n  for (const section of sections) {\n    for (const [condition, pair] of conditions) {\n      const value = section === 120 ? pair[0] : pair[1];\n      out.push({\n        type,\n        materialZh,\n        crossSectionMM2: section,\n        condition,\n        ampacityA: value ?? null,\n      });\n    }\n  }\n  return out;\n};\n\nexport const TB2809_AMPACITY_A: readonly AmpacityEntry[] = [\n  ...M('CT', '铜', [120, 150], [360, 425], [495, 570], [null, null], [null, null]),\n  ...M('CTA', '铜银', [120, 150], [360, 425], [495, 570], [515, 620], [680, 785]),\n  ...M('CTS', '铜锡', [120, 150], [360, 425], [490, 565], [515, 620], [680, 790]),\n  ...M('CTSM', '铜锡', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTSH', '铜锡', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTM', '铜镁', [120, 150], [330, 400], [455, 525], [490, 560], [630, 730]),\n  ...M('CTMM', '铜镁', [120, 150], [310, 360], [420, 480], [450, 520], [580, 670]),\n  ...M('CTMH', '铜镁', [120, 150], [300, 340], [410, 460], [430, 500], [560, 650]),\n  ...M('CTCZ', '铜铬锆', [150], [null, 395], [null, 505], [null, 580], [null, 710]),\n];\n\n/**\n * 查表。\n * @returns 载流量 A；该规格存在但不考核时为 null；该材质无此截面时为 undefined\n */\nexport function findAmpacityA(params: {\n  type: ContactWireTypeCode;\n  crossSectionMM2: CrossSectionMM2;\n  condition: AmpacityCondition;\n}): number | null | undefined {\n  const row = TB2809_AMPACITY_A.find(\n    (e) =>\n      e.type === params.type &&\n      e.crossSectionMM2 === params.crossSectionMM2 &&\n      e.condition === params.condition,\n  );\n  return row === undefined ? undefined : row.ampacityA;\n}\n"],"mappings":";;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AA2CO,IAAM,8BAA8B;AAUpC,IAAM,iCAAyE;AAAA,EACpF,SAAS;AAAA,EACT,SAAS;AAAA,EACT,SAAS;AACX;AAGO,SAAS,mBAAmB,SAAyB;AAC1D,SAAO,UAAU;AACnB;AAYO,SAAS,uBACd,iBACA,iBAAyB,6BACjB;AAER,SAAO,kBAAkB,OAAO,iBAAiB;AACnD;AAGO,IAAM,+BAA+B;AAErC,IAAM,eAAoC;AAAA,EAC/C;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AAAA,EACA;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA,IACtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AAAA,EACA;AAAA,IACE,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,QAAQ;AAAA,IACR,iBAAiB;AAAA,IACjB,sBAAsB;AAAA;AAAA;AAAA,IAGtB,mBAAmB;AAAA,IACnB,kBAAkB;AAAA,IAClB,kBAAkB,mBAAmB,+BAA+B,OAAO;AAAA,EAC7E;AACF;AAGO,SAAS,eAAe,IAAkC;AAC/D,SAAO,aAAa,KAAK,CAAC,MAAM,EAAE,OAAO,EAAE;AAC7C;AAMO,SAAS,qBAAqB,kBAAkC;AACrE,SAAO,mBAAmB;AAC5B;AAKO,SAAS,oBAAoB,MAAwB;AAC1D,SAAO,qBAAqB,KAAK,gBAAgB;AACnD;;;AC3FA,IAAM,IAAI,CACR,MACA,YACA,UACA,UACA,WACA,WACA,eACoB;AACpB,QAAM,aAAuE;AAAA,IAC3E,CAAC,aAAa,QAAQ;AAAA,IACtB,CAAC,cAAc,SAAS;AAAA,IACxB,CAAC,cAAc,SAAS;AAAA,IACxB,CAAC,eAAe,UAAU;AAAA,EAC5B;AACA,QAAM,MAAuB,CAAC;AAC9B,aAAW,WAAW,UAAU;AAC9B,eAAW,CAAC,WAAW,IAAI,KAAK,YAAY;AAC1C,YAAM,QAAQ,YAAY,MAAM,KAAK,CAAC,IAAI,KAAK,CAAC;AAChD,UAAI,KAAK;AAAA,QACP;AAAA,QACA;AAAA,QACA,iBAAiB;AAAA,QACjB;AAAA,QACA,WAAW,SAAS;AAAA,MACtB,CAAC;AAAA,IACH;AAAA,EACF;AACA,SAAO;AACT;AAEO,IAAM,oBAA8C;AAAA,EACzD,GAAG,EAAE,MAAM,UAAK,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,MAAM,IAAI,GAAG,CAAC,MAAM,IAAI,CAAC;AAAA,EAC9E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,OAAO,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC5E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,gBAAM,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,GAAG,CAAC,KAAK,GAAG,CAAC;AAAA,EAC7E,GAAG,EAAE,QAAQ,sBAAO,CAAC,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,GAAG,CAAC,MAAM,GAAG,CAAC;AAC/E;AAMO,SAAS,cAAc,QAIA;AAC5B,QAAM,MAAM,kBAAkB;AAAA,IAC5B,CAAC,MACC,EAAE,SAAS,OAAO,QAClB,EAAE,oBAAoB,OAAO,mBAC7B,EAAE,cAAc,OAAO;AAAA,EAC3B;AACA,SAAO,QAAQ,SAAY,SAAY,IAAI;AAC7C;","names":[]}

package/dist/stroke/index.cjs

@@ -6,7 +6,7 @@
 
 
 
-var _chunk5Q6IASB2cjs = require('../chunk-5Q6IASB2.cjs');
+var _chunkTXFBPGHRcjs = require('../chunk-TXFBPGHR.cjs');
 
 
 
@@ -15,5 +15,5 @@ var _chunk5Q6IASB2cjs = require('../chunk-5Q6IASB2.cjs');
 
 
 
-exports.CONVENTIONAL_MARGIN_MM = _chunk5Q6IASB2cjs.CONVENTIONAL_MARGIN_MM; exports.MIN_MARGIN_MM = _chunk5Q6IASB2cjs.MIN_MARGIN_MM; exports.TRANSMISSION_RATIOS = _chunk5Q6IASB2cjs.TRANSMISSION_RATIOS; exports.elongationMM = _chunk5Q6IASB2cjs.elongationMM; exports.requiredStrokeMM = _chunk5Q6IASB2cjs.requiredStrokeMM; exports.strokeCheck = _chunk5Q6IASB2cjs.strokeCheck; exports.strokeMeta = _chunk5Q6IASB2cjs.strokeMeta;
+exports.CONVENTIONAL_MARGIN_MM = _chunkTXFBPGHRcjs.CONVENTIONAL_MARGIN_MM; exports.MIN_MARGIN_MM = _chunkTXFBPGHRcjs.MIN_MARGIN_MM; exports.TRANSMISSION_RATIOS = _chunkTXFBPGHRcjs.TRANSMISSION_RATIOS; exports.elongationMM = _chunkTXFBPGHRcjs.elongationMM; exports.requiredStrokeMM = _chunkTXFBPGHRcjs.requiredStrokeMM; exports.strokeCheck = _chunkTXFBPGHRcjs.strokeCheck; exports.strokeMeta = _chunkTXFBPGHRcjs.strokeMeta;
 //# sourceMappingURL=index.cjs.map

package/dist/stroke/index.js

@@ -6,7 +6,7 @@ import {
   requiredStrokeMM,
   strokeCheck,
   strokeMeta
-} from "../chunk-KOSC6EA3.js";
+} from "../chunk-G5ZI24PW.js";
 export {
   CONVENTIONAL_MARGIN_MM,
   MIN_MARGIN_MM,

package/dist/voltage-drop/index.cjs

@@ -2,11 +2,11 @@
 
 
 
-var _chunkRVP3IU2Lcjs = require('../chunk-RVP3IU2L.cjs');
+var _chunkNSVETJYAcjs = require('../chunk-NSVETJYA.cjs');
 require('../chunk-DGO2DCO5.cjs');
 
 
 
 
-exports.DEFAULT_MIN_END_VOLTAGE_V = _chunkRVP3IU2Lcjs.DEFAULT_MIN_END_VOLTAGE_V; exports.voltageDropCheck = _chunkRVP3IU2Lcjs.voltageDropCheck; exports.voltageDropMeta = _chunkRVP3IU2Lcjs.voltageDropMeta;
+exports.DEFAULT_MIN_END_VOLTAGE_V = _chunkNSVETJYAcjs.DEFAULT_MIN_END_VOLTAGE_V; exports.voltageDropCheck = _chunkNSVETJYAcjs.voltageDropCheck; exports.voltageDropMeta = _chunkNSVETJYAcjs.voltageDropMeta;
 //# sourceMappingURL=index.cjs.map