ocs-calculators 0.1.0 → 0.1.2

package/dist/tension/index.d.ts

@@ -0,0 +1,85 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.js';
+
+declare const tensionMeta: CalculatorMeta;
+
+/** 单个温度档的输入参数 */
+interface TensionPointInput {
+    /** 基准工况张力 T₁，kN */
+    readonly baseTensionKN: number;
+    /** 基准温度 t₁，℃ */
+    readonly baseTempDegC: number;
+    /** 目标温度 t₂，℃ */
+    readonly targetTempDegC: number;
+    /** 单位自重荷载 g，N/m（覆冰工况传自重与冰重的组合值） */
+    readonly weightPerLengthNPerM: number;
+    /** 计算跨距 l，m（多跨锚段传当量跨距 l_D） */
+    readonly spanM: number;
+    /** 弹性模量 E，GPa */
+    readonly elasticModulusGPa: number;
+    /** 截面积 A，mm² */
+    readonly crossSectionMM2: number;
+    /** 线膨胀系数 α，1/℃ */
+    readonly expansionPerDegC: number;
+}
+/** 安装曲线公共参数（不含目标温度） */
+type TensionCurveInput = Omit<TensionPointInput, 'targetTempDegC'>;
+/** 单个温度档的计算结果 */
+interface TensionResult {
+    /** 目标温度 t₂，℃ */
+    readonly targetTempDegC: number;
+    /** 该温度下的张力 T₂，kN */
+    readonly tensionKN: number;
+    /** 跨中弛度 f，m（抛物线近似） */
+    readonly sagM: number;
+    /** 求解迭代次数 */
+    readonly iterations: number;
+    /** 状态方程残差，N（用于校验收敛，应接近 0） */
+    readonly residualN: number;
+}
+/**
+ * 跨中弛度，抛物线近似：f = gl²/(8T)
+ * @param weightPerLengthNPerM 单位自重荷载 g，N/m
+ * @param spanM 跨距 l，m
+ * @param tensionN 张力 T，N
+ * @returns 弛度 f，m
+ */
+declare function sagM(weightPerLengthNPerM: number, spanM: number, tensionN: number): number;
+/**
+ * 当量跨距（多跨锚段归算）：l_D = √(Σlᵢ³ / Σlᵢ)
+ * @param spansM 各跨跨距，m
+ * @returns 当量跨距 l_D，m
+ */
+declare function equivalentSpanM(spansM: readonly number[]): number;
+/**
+ * 覆冰荷载（均匀冰筒模型）与 icing 模块共用 `src/common/ice.ts`，
+ * 由根 index 统一导出，此处不再重复定义。
+ */
+/**
+ * 状态方程系数 K = g²l²EA/24，单位 N³。
+ * 使状态方程可写成 F(T) = T − K/T² 的紧凑形式。
+ */
+declare function stateCoefficientK(weightPerLengthNPerM: number, spanM: number, elasticModulusGPa: number, crossSectionMM2: number): number;
+/**
+ * 求解状态方程 T − K/T² = target 的正根。
+ *
+ * h(T) = T − K/T² − target 在 T > 0 上严格单调递增（h′ = 1 + 2K/T³ > 0），
+ * 因此用二分法必定收敛。又由 T = target + K/T² 可知 T > target，
+ * 可直接取 target 作为下界，bracket 很紧。
+ */
+declare function solveTensionN(K: number, targetN: number): {
+    tensionN: number;
+    iterations: number;
+    residualN: number;
+};
+/**
+ * 求某一温度档的张力与弛度。
+ *
+ * 状态方程：T₂ − g²l²EA/(24T₂²) = T₁ − g²l²EA/(24T₁²) − αEA(t₂ − t₁)
+ */
+declare function tensionAt(input: TensionPointInput): TensionResult;
+/**
+ * 批量求解多个温度档，生成安装曲线表。
+ */
+declare function tensionCurve(base: TensionCurveInput, tempsDegC: readonly number[]): TensionResult[];
+
+export { type TensionCurveInput, type TensionPointInput, type TensionResult, equivalentSpanM, sagM, solveTensionN, stateCoefficientK, tensionAt, tensionCurve, tensionMeta };

package/dist/tension/index.js

@@ -0,0 +1,19 @@
+import {
+  equivalentSpanM,
+  sagM,
+  solveTensionN,
+  stateCoefficientK,
+  tensionAt,
+  tensionCurve,
+  tensionMeta
+} from "../chunk-QTPXTDGY.js";
+export {
+  equivalentSpanM,
+  sagM,
+  solveTensionN,
+  stateCoefficientK,
+  tensionAt,
+  tensionCurve,
+  tensionMeta
+};
+//# sourceMappingURL=index.js.map

package/dist/tension/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":[],"sourcesContent":[],"mappings":"","names":[]}

package/dist/types-C2OanO8N.d.cts

@@ -0,0 +1,33 @@
+/**
+ * 全库公共类型定义。
+ *
+ * 命名约定（重要）：
+ * 所有数值字段的单位都写在变量名末尾，例如 tensionKN / spanM / crossSectionMM2。
+ * 工程计算里单位混淆是头号 bug 来源，宁可名字长，也不要靠注释记单位。
+ */
+/**
+ * 每个计算器模块必须导出的元信息。
+ * 这是本库区别于"玩具代码"的核心 —— 公式、依据、适用范围、免责声明全部可机读。
+ */
+interface CalculatorMeta {
+    /** 计算器中文名 */
+    readonly name: string;
+    /** 计算器英文名，用于国际检索 */
+    readonly nameEn: string;
+    /** 一句话用途说明 */
+    readonly summary: string;
+    /** 核心公式，LaTeX 或纯文本，可多条 */
+    readonly formula: readonly string[];
+    /** 参考依据：标准号、设计手册、教材。注意标注该标准是否真正包含此公式 */
+    readonly references: readonly string[];
+    /** 适用范围与已知限制 */
+    readonly scope: readonly string[];
+    /** 免责声明 */
+    readonly disclaimer: string;
+    /** 在线版本地址 */
+    readonly online: string;
+}
+/** 重力加速度，N/kg（m/s²） */
+declare const G0 = 9.81;
+
+export { type CalculatorMeta as C, G0 as G };

package/dist/types-C2OanO8N.d.ts

@@ -0,0 +1,33 @@
+/**
+ * 全库公共类型定义。
+ *
+ * 命名约定（重要）：
+ * 所有数值字段的单位都写在变量名末尾，例如 tensionKN / spanM / crossSectionMM2。
+ * 工程计算里单位混淆是头号 bug 来源，宁可名字长，也不要靠注释记单位。
+ */
+/**
+ * 每个计算器模块必须导出的元信息。
+ * 这是本库区别于"玩具代码"的核心 —— 公式、依据、适用范围、免责声明全部可机读。
+ */
+interface CalculatorMeta {
+    /** 计算器中文名 */
+    readonly name: string;
+    /** 计算器英文名，用于国际检索 */
+    readonly nameEn: string;
+    /** 一句话用途说明 */
+    readonly summary: string;
+    /** 核心公式，LaTeX 或纯文本，可多条 */
+    readonly formula: readonly string[];
+    /** 参考依据：标准号、设计手册、教材。注意标注该标准是否真正包含此公式 */
+    readonly references: readonly string[];
+    /** 适用范围与已知限制 */
+    readonly scope: readonly string[];
+    /** 免责声明 */
+    readonly disclaimer: string;
+    /** 在线版本地址 */
+    readonly online: string;
+}
+/** 重力加速度，N/kg（m/s²） */
+declare const G0 = 9.81;
+
+export { type CalculatorMeta as C, G0 as G };

package/dist/voltage-drop/index.cjs

@@ -0,0 +1,12 @@
+"use strict";Object.defineProperty(exports, "__esModule", {value: true});
+
+
+
+var _chunkRVP3IU2Lcjs = require('../chunk-RVP3IU2L.cjs');
+require('../chunk-DGO2DCO5.cjs');
+
+
+
+
+exports.DEFAULT_MIN_END_VOLTAGE_V = _chunkRVP3IU2Lcjs.DEFAULT_MIN_END_VOLTAGE_V; exports.voltageDropCheck = _chunkRVP3IU2Lcjs.voltageDropCheck; exports.voltageDropMeta = _chunkRVP3IU2Lcjs.voltageDropMeta;
+//# sourceMappingURL=index.cjs.map

package/dist/voltage-drop/index.cjs.map

@@ -0,0 +1 @@
+{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/voltage-drop/index.cjs"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACF,yDAA8B;AAC9B,iCAA8B;AAC9B;AACE;AACA;AACA;AACF,4MAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/voltage-drop/index.cjs"}

package/dist/voltage-drop/index.d.cts

@@ -0,0 +1,40 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.cjs';
+
+declare const voltageDropMeta: CalculatorMeta;
+
+/** 25kV 体系常用的末端电压下限，V */
+declare const DEFAULT_MIN_END_VOLTAGE_V = 20000;
+interface VoltageDropInput {
+    /** 变电所母线电压 U₀，V */
+    readonly busVoltageV: number;
+    /** 持续电流 I，A */
+    readonly currentA: number;
+    /** 20℃ 单位电阻 r₂₀，Ω/km */
+    readonly r20OhmPerKm: number;
+    /** 供电臂等效长度 L，km */
+    readonly feederLengthKm: number;
+    /** 环境温度 T，℃。缺省 25 */
+    readonly tempDegC?: number;
+    /** 并联导线数。缺省 1 */
+    readonly parallelCount?: number;
+    /** 末端最低允许电压，V。缺省 20000 */
+    readonly minEndVoltageV?: number;
+}
+interface VoltageDropResult {
+    /** 温度修正（并含并联折减）后的单位电阻 r_T，Ω/km */
+    readonly rTOhmPerKm: number;
+    /** 电压损失 ΔU，V */
+    readonly voltageDropV: number;
+    /** 末端电压 U_end，V */
+    readonly endVoltageV: number;
+    /** 压降率，% */
+    readonly dropPercent: number;
+    /** 末端电压是否满足要求 */
+    readonly passes: boolean;
+}
+/**
+ * 电压降校核：ΔU = I·r_T·L（并联 n 路时 r_T/n），U_end = U₀ − ΔU。
+ */
+declare function voltageDropCheck(input: VoltageDropInput): VoltageDropResult;
+
+export { DEFAULT_MIN_END_VOLTAGE_V, type VoltageDropInput, type VoltageDropResult, voltageDropCheck, voltageDropMeta };

package/dist/voltage-drop/index.d.ts

@@ -0,0 +1,40 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.js';
+
+declare const voltageDropMeta: CalculatorMeta;
+
+/** 25kV 体系常用的末端电压下限，V */
+declare const DEFAULT_MIN_END_VOLTAGE_V = 20000;
+interface VoltageDropInput {
+    /** 变电所母线电压 U₀，V */
+    readonly busVoltageV: number;
+    /** 持续电流 I，A */
+    readonly currentA: number;
+    /** 20℃ 单位电阻 r₂₀，Ω/km */
+    readonly r20OhmPerKm: number;
+    /** 供电臂等效长度 L，km */
+    readonly feederLengthKm: number;
+    /** 环境温度 T，℃。缺省 25 */
+    readonly tempDegC?: number;
+    /** 并联导线数。缺省 1 */
+    readonly parallelCount?: number;
+    /** 末端最低允许电压，V。缺省 20000 */
+    readonly minEndVoltageV?: number;
+}
+interface VoltageDropResult {
+    /** 温度修正（并含并联折减）后的单位电阻 r_T，Ω/km */
+    readonly rTOhmPerKm: number;
+    /** 电压损失 ΔU，V */
+    readonly voltageDropV: number;
+    /** 末端电压 U_end，V */
+    readonly endVoltageV: number;
+    /** 压降率，% */
+    readonly dropPercent: number;
+    /** 末端电压是否满足要求 */
+    readonly passes: boolean;
+}
+/**
+ * 电压降校核：ΔU = I·r_T·L（并联 n 路时 r_T/n），U_end = U₀ − ΔU。
+ */
+declare function voltageDropCheck(input: VoltageDropInput): VoltageDropResult;
+
+export { DEFAULT_MIN_END_VOLTAGE_V, type VoltageDropInput, type VoltageDropResult, voltageDropCheck, voltageDropMeta };

package/dist/voltage-drop/index.js

@@ -0,0 +1,12 @@
+import {
+  DEFAULT_MIN_END_VOLTAGE_V,
+  voltageDropCheck,
+  voltageDropMeta
+} from "../chunk-IUENDAAJ.js";
+import "../chunk-YHDO6XVM.js";
+export {
+  DEFAULT_MIN_END_VOLTAGE_V,
+  voltageDropCheck,
+  voltageDropMeta
+};
+//# sourceMappingURL=index.js.map

package/dist/voltage-drop/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":[],"sourcesContent":[],"mappings":"","names":[]}

package/dist/wavespeed/index.cjs

@@ -0,0 +1,17 @@
+"use strict";Object.defineProperty(exports, "__esModule", {value: true});
+
+
+
+
+
+
+var _chunkNBHEOJ5Acjs = require('../chunk-NBHEOJ5A.cjs');
+
+
+
+
+
+
+
+exports.DEFAULT_WARN_THRESHOLD = _chunkNBHEOJ5Acjs.DEFAULT_WARN_THRESHOLD; exports.kmHToMPerS = _chunkNBHEOJ5Acjs.kmHToMPerS; exports.naturalFrequencyHz = _chunkNBHEOJ5Acjs.naturalFrequencyHz; exports.wavePropagationSpeedMPerS = _chunkNBHEOJ5Acjs.wavePropagationSpeedMPerS; exports.waveSpeedCheck = _chunkNBHEOJ5Acjs.waveSpeedCheck; exports.wavespeedMeta = _chunkNBHEOJ5Acjs.wavespeedMeta;
+//# sourceMappingURL=index.cjs.map

package/dist/wavespeed/index.cjs.map

@@ -0,0 +1 @@
+{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/wavespeed/index.cjs"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACA;AACA;AACA;AACF,yDAA8B;AAC9B;AACE;AACA;AACA;AACA;AACA;AACA;AACF,qYAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/wavespeed/index.cjs"}

package/dist/wavespeed/index.d.cts

@@ -0,0 +1,58 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.cjs';
+
+declare const wavespeedMeta: CalculatorMeta;
+
+/** 波速利用率告警阈值（工程经验值） */
+declare const DEFAULT_WARN_THRESHOLD = 0.7;
+interface WaveSpeedInput {
+    /** 接触线张力 T，kN */
+    readonly tensionKN: number;
+    /** 线密度 ρ，kg/m */
+    readonly linearMassKgPerM: number;
+    /** 列车速度 v，km/h */
+    readonly speedKmH: number;
+    /** 跨距 l，m */
+    readonly spanM: number;
+    /** 告警阈值 β。缺省 0.7 */
+    readonly warnThreshold?: number;
+}
+interface WaveSpeedResult {
+    /** 波传播速度 c = √(T/ρ)，m/s */
+    readonly waveSpeedMPerS: number;
+    /** 波速利用率 β = v/c，无量纲 */
+    readonly beta: number;
+    /** 波速利用率，% */
+    readonly betaPercent: number;
+    /** 前三阶固有频率 f₁ ~ f₃，Hz */
+    readonly naturalFrequenciesHz: readonly number[];
+    /** 一阶共振车速 v_res = f₁·l，km/h */
+    readonly resonanceSpeedKmH: number;
+    /** β 是否达到告警阈值 */
+    readonly warn: boolean;
+}
+/**
+ * 波传播速度：c = √(T/ρ)，m/s。
+ *
+ * @param tensionKN 接触线张力 T，kN
+ * @param linearMassKgPerM 线密度 ρ，kg/m
+ */
+declare function wavePropagationSpeedMPerS(tensionKN: number, linearMassKgPerM: number): number;
+/**
+ * 两端固定弦第 n 阶固有频率：f_n = n/(2L)·√(T/ρ) = n·c/(2L)，Hz。
+ *
+ * @param n 阶次，正整数
+ * @param spanM 跨距 L，m
+ * @param waveSpeedMPerS 波速 c，m/s
+ */
+declare function naturalFrequencyHz(n: number, spanM: number, waveSpeedMPerS: number): number;
+/** km/h → m/s */
+declare function kmHToMPerS(speedKmH: number): number;
+/**
+ * 波速利用率校核。
+ *
+ * β = v/c；β 越接近 1 越接近共振区，达到阈值（默认 0.7）时告警。
+ * 一阶共振车速 v_res 为跨距通过频率与一阶固有频率相遇时的车速。
+ */
+declare function waveSpeedCheck(input: WaveSpeedInput): WaveSpeedResult;
+
+export { DEFAULT_WARN_THRESHOLD, type WaveSpeedInput, type WaveSpeedResult, kmHToMPerS, naturalFrequencyHz, wavePropagationSpeedMPerS, waveSpeedCheck, wavespeedMeta };

package/dist/wavespeed/index.d.ts

@@ -0,0 +1,58 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.js';
+
+declare const wavespeedMeta: CalculatorMeta;
+
+/** 波速利用率告警阈值（工程经验值） */
+declare const DEFAULT_WARN_THRESHOLD = 0.7;
+interface WaveSpeedInput {
+    /** 接触线张力 T，kN */
+    readonly tensionKN: number;
+    /** 线密度 ρ，kg/m */
+    readonly linearMassKgPerM: number;
+    /** 列车速度 v，km/h */
+    readonly speedKmH: number;
+    /** 跨距 l，m */
+    readonly spanM: number;
+    /** 告警阈值 β。缺省 0.7 */
+    readonly warnThreshold?: number;
+}
+interface WaveSpeedResult {
+    /** 波传播速度 c = √(T/ρ)，m/s */
+    readonly waveSpeedMPerS: number;
+    /** 波速利用率 β = v/c，无量纲 */
+    readonly beta: number;
+    /** 波速利用率，% */
+    readonly betaPercent: number;
+    /** 前三阶固有频率 f₁ ~ f₃，Hz */
+    readonly naturalFrequenciesHz: readonly number[];
+    /** 一阶共振车速 v_res = f₁·l，km/h */
+    readonly resonanceSpeedKmH: number;
+    /** β 是否达到告警阈值 */
+    readonly warn: boolean;
+}
+/**
+ * 波传播速度：c = √(T/ρ)，m/s。
+ *
+ * @param tensionKN 接触线张力 T，kN
+ * @param linearMassKgPerM 线密度 ρ，kg/m
+ */
+declare function wavePropagationSpeedMPerS(tensionKN: number, linearMassKgPerM: number): number;
+/**
+ * 两端固定弦第 n 阶固有频率：f_n = n/(2L)·√(T/ρ) = n·c/(2L)，Hz。
+ *
+ * @param n 阶次，正整数
+ * @param spanM 跨距 L，m
+ * @param waveSpeedMPerS 波速 c，m/s
+ */
+declare function naturalFrequencyHz(n: number, spanM: number, waveSpeedMPerS: number): number;
+/** km/h → m/s */
+declare function kmHToMPerS(speedKmH: number): number;
+/**
+ * 波速利用率校核。
+ *
+ * β = v/c；β 越接近 1 越接近共振区，达到阈值（默认 0.7）时告警。
+ * 一阶共振车速 v_res 为跨距通过频率与一阶固有频率相遇时的车速。
+ */
+declare function waveSpeedCheck(input: WaveSpeedInput): WaveSpeedResult;
+
+export { DEFAULT_WARN_THRESHOLD, type WaveSpeedInput, type WaveSpeedResult, kmHToMPerS, naturalFrequencyHz, wavePropagationSpeedMPerS, waveSpeedCheck, wavespeedMeta };

package/dist/wavespeed/index.js

@@ -0,0 +1,17 @@
+import {
+  DEFAULT_WARN_THRESHOLD,
+  kmHToMPerS,
+  naturalFrequencyHz,
+  wavePropagationSpeedMPerS,
+  waveSpeedCheck,
+  wavespeedMeta
+} from "../chunk-VAHQDIMW.js";
+export {
+  DEFAULT_WARN_THRESHOLD,
+  kmHToMPerS,
+  naturalFrequencyHz,
+  wavePropagationSpeedMPerS,
+  waveSpeedCheck,
+  wavespeedMeta
+};
+//# sourceMappingURL=index.js.map

package/dist/wavespeed/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":[],"sourcesContent":[],"mappings":"","names":[]}

package/dist/wear/index.cjs

@@ -0,0 +1,13 @@
+"use strict";Object.defineProperty(exports, "__esModule", {value: true});
+
+
+
+
+var _chunk5INEDXRYcjs = require('../chunk-5INEDXRY.cjs');
+
+
+
+
+
+exports.DEFAULT_REPLACEMENT_THRESHOLD_PERCENT = _chunk5INEDXRYcjs.DEFAULT_REPLACEMENT_THRESHOLD_PERCENT; exports.sectionFromDiameterMM2 = _chunk5INEDXRYcjs.sectionFromDiameterMM2; exports.wearMeta = _chunk5INEDXRYcjs.wearMeta; exports.wearRatio = _chunk5INEDXRYcjs.wearRatio;
+//# sourceMappingURL=index.cjs.map

package/dist/wear/index.cjs.map

@@ -0,0 +1 @@
+{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/wear/index.cjs"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACA;AACF,yDAA8B;AAC9B;AACE;AACA;AACA;AACA;AACF,mRAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/wear/index.cjs"}

package/dist/wear/index.d.cts

@@ -0,0 +1,55 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.cjs';
+
+declare const wearMeta: CalculatorMeta;
+
+/** 更换阈值缺省值：η > 20% 建议更换接触线 */
+declare const DEFAULT_REPLACEMENT_THRESHOLD_PERCENT = 20;
+/** 磨耗计算公共输入 */
+interface WearBaseInput {
+    /** 原截面积 A₀，mm² */
+    readonly originalSectionMM2: number;
+    /** 更换阈值 η，%。缺省 20 */
+    readonly replacementThresholdPercent?: number;
+}
+/** 按实测残截面积计算 */
+interface WearByAreaInput extends WearBaseInput {
+    readonly mode: 'area';
+    /** 实测残截面积 A，mm²，不得大于 A₀ */
+    readonly residualSectionMM2: number;
+}
+/** 按实测残径计算（圆截面近似 A = πd²/4） */
+interface WearByDiameterInput extends WearBaseInput {
+    readonly mode: 'residual-diameter';
+    /** 实测残径 d，mm */
+    readonly residualDiameterMM: number;
+}
+type WearInput = WearByAreaInput | WearByDiameterInput;
+/** 判定结论：keep = 继续使用，replace = 建议更换 */
+type WearVerdict = 'keep' | 'replace';
+/** 磨耗率计算结果 */
+interface WearResult {
+    /** 原截面积 A₀，mm² */
+    readonly originalSectionMM2: number;
+    /** 参与计算的残截面积 A，mm²（残径模式为换算值） */
+    readonly residualSectionMM2: number;
+    /** 截面损失 A₀ − A，mm² */
+    readonly sectionLossMM2: number;
+    /** 磨耗率 η，% */
+    readonly wearPercent: number;
+    /** 使用的更换阈值，% */
+    readonly thresholdPercent: number;
+    readonly verdict: WearVerdict;
+}
+/** 圆截面近似：由实测残径 d（mm）换算残截面积 A = π·d²/4（mm²） */
+declare function sectionFromDiameterMM2(diameterMM: number): number;
+/**
+ * 接触线磨耗率：η = (A₀ − A) / A₀ × 100%。
+ *
+ * 支持两种输入模式：直接给残截面积（`mode: 'area'`），或给实测残径
+ * 按 A = π·d²/4 换算（`mode: 'residual-diameter'`）。
+ *
+ * 判定：η **严格大于**阈值（缺省 20%）判为 `replace`，等于阈值仍为 `keep`。
+ */
+declare function wearRatio(input: WearInput): WearResult;
+
+export { DEFAULT_REPLACEMENT_THRESHOLD_PERCENT, type WearBaseInput, type WearByAreaInput, type WearByDiameterInput, type WearInput, type WearResult, type WearVerdict, sectionFromDiameterMM2, wearMeta, wearRatio };

package/dist/wear/index.d.ts

@@ -0,0 +1,55 @@
+import { C as CalculatorMeta } from '../types-C2OanO8N.js';
+
+declare const wearMeta: CalculatorMeta;
+
+/** 更换阈值缺省值：η > 20% 建议更换接触线 */
+declare const DEFAULT_REPLACEMENT_THRESHOLD_PERCENT = 20;
+/** 磨耗计算公共输入 */
+interface WearBaseInput {
+    /** 原截面积 A₀，mm² */
+    readonly originalSectionMM2: number;
+    /** 更换阈值 η，%。缺省 20 */
+    readonly replacementThresholdPercent?: number;
+}
+/** 按实测残截面积计算 */
+interface WearByAreaInput extends WearBaseInput {
+    readonly mode: 'area';
+    /** 实测残截面积 A，mm²，不得大于 A₀ */
+    readonly residualSectionMM2: number;
+}
+/** 按实测残径计算（圆截面近似 A = πd²/4） */
+interface WearByDiameterInput extends WearBaseInput {
+    readonly mode: 'residual-diameter';
+    /** 实测残径 d，mm */
+    readonly residualDiameterMM: number;
+}
+type WearInput = WearByAreaInput | WearByDiameterInput;
+/** 判定结论：keep = 继续使用，replace = 建议更换 */
+type WearVerdict = 'keep' | 'replace';
+/** 磨耗率计算结果 */
+interface WearResult {
+    /** 原截面积 A₀，mm² */
+    readonly originalSectionMM2: number;
+    /** 参与计算的残截面积 A，mm²（残径模式为换算值） */
+    readonly residualSectionMM2: number;
+    /** 截面损失 A₀ − A，mm² */
+    readonly sectionLossMM2: number;
+    /** 磨耗率 η，% */
+    readonly wearPercent: number;
+    /** 使用的更换阈值，% */
+    readonly thresholdPercent: number;
+    readonly verdict: WearVerdict;
+}
+/** 圆截面近似：由实测残径 d（mm）换算残截面积 A = π·d²/4（mm²） */
+declare function sectionFromDiameterMM2(diameterMM: number): number;
+/**
+ * 接触线磨耗率：η = (A₀ − A) / A₀ × 100%。
+ *
+ * 支持两种输入模式：直接给残截面积（`mode: 'area'`），或给实测残径
+ * 按 A = π·d²/4 换算（`mode: 'residual-diameter'`）。
+ *
+ * 判定：η **严格大于**阈值（缺省 20%）判为 `replace`，等于阈值仍为 `keep`。
+ */
+declare function wearRatio(input: WearInput): WearResult;
+
+export { DEFAULT_REPLACEMENT_THRESHOLD_PERCENT, type WearBaseInput, type WearByAreaInput, type WearByDiameterInput, type WearInput, type WearResult, type WearVerdict, sectionFromDiameterMM2, wearMeta, wearRatio };

package/dist/wear/index.js

@@ -0,0 +1,13 @@
+import {
+  DEFAULT_REPLACEMENT_THRESHOLD_PERCENT,
+  sectionFromDiameterMM2,
+  wearMeta,
+  wearRatio
+} from "../chunk-LDSV3U4M.js";
+export {
+  DEFAULT_REPLACEMENT_THRESHOLD_PERCENT,
+  sectionFromDiameterMM2,
+  wearMeta,
+  wearRatio
+};
+//# sourceMappingURL=index.js.map

package/dist/wear/index.js.map

@@ -0,0 +1 @@
+{"version":3,"sources":[],"sourcesContent":[],"mappings":"","names":[]}

package/dist/wind/index.cjs

@@ -0,0 +1,15 @@
+"use strict";Object.defineProperty(exports, "__esModule", {value: true});
+
+
+
+
+
+var _chunkFVESJBUDcjs = require('../chunk-FVESJBUD.cjs');
+
+
+
+
+
+
+exports.AIR_DENSITY_KG_PER_M3 = _chunkFVESJBUDcjs.AIR_DENSITY_KG_PER_M3; exports.windClearanceCheck = _chunkFVESJBUDcjs.windClearanceCheck; exports.windDeflectionM = _chunkFVESJBUDcjs.windDeflectionM; exports.windLoadNPerM = _chunkFVESJBUDcjs.windLoadNPerM; exports.windMeta = _chunkFVESJBUDcjs.windMeta;
+//# sourceMappingURL=index.cjs.map

package/dist/wind/index.cjs.map

@@ -0,0 +1 @@
+{"version":3,"sources":["/home/runner/work/ocs-calculators/ocs-calculators/dist/wind/index.cjs"],"names":[],"mappings":"AAAA;AACE;AACA;AACA;AACA;AACA;AACF,yDAA8B;AAC9B;AACE;AACA;AACA;AACA;AACA;AACF,gTAAC","file":"/home/runner/work/ocs-calculators/ocs-calculators/dist/wind/index.cjs"}