observability-toolkit 2.0.0 → 2.1.1

package/dist/generated/opentelemetry/proto/collector/metrics/v1/metrics_service_pb.js

@@ -0,0 +1,43 @@
+// Copyright 2019, OpenTelemetry Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+import { fileDesc, messageDesc, serviceDesc } from "@bufbuild/protobuf/codegenv2";
+import { file_opentelemetry_proto_metrics_v1_metrics } from "../../../metrics/v1/metrics_pb.js";
+/**
+ * Describes the file opentelemetry/proto/collector/metrics/v1/metrics_service.proto.
+ */
+export const file_opentelemetry_proto_collector_metrics_v1_metrics_service = /*@__PURE__*/ fileDesc("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", [file_opentelemetry_proto_metrics_v1_metrics]);
+/**
+ * Describes the message opentelemetry.proto.collector.metrics.v1.ExportMetricsServiceRequest.
+ * Use `create(ExportMetricsServiceRequestSchema)` to create a new message.
+ */
+export const ExportMetricsServiceRequestSchema = /*@__PURE__*/ messageDesc(file_opentelemetry_proto_collector_metrics_v1_metrics_service, 0);
+/**
+ * Describes the message opentelemetry.proto.collector.metrics.v1.ExportMetricsServiceResponse.
+ * Use `create(ExportMetricsServiceResponseSchema)` to create a new message.
+ */
+export const ExportMetricsServiceResponseSchema = /*@__PURE__*/ messageDesc(file_opentelemetry_proto_collector_metrics_v1_metrics_service, 1);
+/**
+ * Describes the message opentelemetry.proto.collector.metrics.v1.ExportMetricsPartialSuccess.
+ * Use `create(ExportMetricsPartialSuccessSchema)` to create a new message.
+ */
+export const ExportMetricsPartialSuccessSchema = /*@__PURE__*/ messageDesc(file_opentelemetry_proto_collector_metrics_v1_metrics_service, 2);
+/**
+ * Service that can be used to push metrics between one Application
+ * instrumented with OpenTelemetry and a collector, or between a collector and a
+ * central collector.
+ *
+ * @generated from service opentelemetry.proto.collector.metrics.v1.MetricsService
+ */
+export const MetricsService = /*@__PURE__*/ serviceDesc(file_opentelemetry_proto_collector_metrics_v1_metrics_service, 0);
+//# sourceMappingURL=metrics_service_pb.js.map

package/dist/generated/opentelemetry/proto/collector/metrics/v1/metrics_service_pb.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"metrics_service_pb.js","sourceRoot":"","sources":["../../../../../../../src/generated/opentelemetry/proto/collector/metrics/v1/metrics_service_pb.ts"],"names":[],"mappings":"AAAA,wCAAwC;AACxC,EAAE;AACF,kEAAkE;AAClE,mEAAmE;AACnE,0CAA0C;AAC1C,EAAE;AACF,iDAAiD;AACjD,EAAE;AACF,sEAAsE;AACtE,oEAAoE;AACpE,2EAA2E;AAC3E,sEAAsE;AACtE,iCAAiC;AAOjC,OAAO,EAAE,QAAQ,EAAE,WAAW,EAAE,WAAW,EAAE,MAAM,8BAA8B,CAAC;AAElF,OAAO,EAAE,2CAA2C,EAAE,MAAM,mCAAmC,CAAC;AAGhG;;GAEG;AACH,MAAM,CAAC,MAAM,6DAA6D,GAAY,aAAa,CACjG,QAAQ,CAAC,0gCAA0gC,EAAE,CAAC,2CAA2C,CAAC,CAAC,CAAC;AAkBtkC;;;GAGG;AACH,MAAM,CAAC,MAAM,iCAAiC,GAA4C,aAAa,CACrG,WAAW,CAAC,6DAA6D,EAAE,CAAC,CAAC,CAAC;AA4BhF;;;GAGG;AACH,MAAM,CAAC,MAAM,kCAAkC,GAA6C,aAAa,CACvG,WAAW,CAAC,6DAA6D,EAAE,CAAC,CAAC,CAAC;AA8BhF;;;GAGG;AACH,MAAM,CAAC,MAAM,iCAAiC,GAA4C,aAAa,CACrG,WAAW,CAAC,6DAA6D,EAAE,CAAC,CAAC,CAAC;AAEhF;;;;;;GAMG;AACH,MAAM,CAAC,MAAM,cAAc,GAStB,aAAa,CAChB,WAAW,CAAC,6DAA6D,EAAE,CAAC,CAAC,CAAC"}

package/dist/generated/opentelemetry/proto/collector/profiles/v1development/profiles_service_pb.d.ts

@@ -0,0 +1,111 @@
+import type { GenFile, GenMessage, GenService } from "@bufbuild/protobuf/codegenv2";
+import type { ProfilesDictionary, ResourceProfiles } from "../../../profiles/v1development/profiles_pb.js";
+import type { Message } from "@bufbuild/protobuf";
+/**
+ * Describes the file opentelemetry/proto/collector/profiles/v1development/profiles_service.proto.
+ */
+export declare const file_opentelemetry_proto_collector_profiles_v1development_profiles_service: GenFile;
+/**
+ * @generated from message opentelemetry.proto.collector.profiles.v1development.ExportProfilesServiceRequest
+ */
+export type ExportProfilesServiceRequest = Message<"opentelemetry.proto.collector.profiles.v1development.ExportProfilesServiceRequest"> & {
+    /**
+     * An array of ResourceProfiles.
+     * For data coming from a single resource this array will typically contain one
+     * element. Intermediary nodes (such as OpenTelemetry Collector) that receive
+     * data from multiple origins typically batch the data before forwarding further and
+     * in that case this array will contain multiple elements.
+     *
+     * @generated from field: repeated opentelemetry.proto.profiles.v1development.ResourceProfiles resource_profiles = 1;
+     */
+    resourceProfiles: ResourceProfiles[];
+    /**
+     * The reference table containing all data shared by profiles across the message being sent.
+     *
+     * @generated from field: opentelemetry.proto.profiles.v1development.ProfilesDictionary dictionary = 2;
+     */
+    dictionary?: ProfilesDictionary;
+};
+/**
+ * Describes the message opentelemetry.proto.collector.profiles.v1development.ExportProfilesServiceRequest.
+ * Use `create(ExportProfilesServiceRequestSchema)` to create a new message.
+ */
+export declare const ExportProfilesServiceRequestSchema: GenMessage<ExportProfilesServiceRequest>;
+/**
+ * @generated from message opentelemetry.proto.collector.profiles.v1development.ExportProfilesServiceResponse
+ */
+export type ExportProfilesServiceResponse = Message<"opentelemetry.proto.collector.profiles.v1development.ExportProfilesServiceResponse"> & {
+    /**
+     * The details of a partially successful export request.
+     *
+     * If the request is only partially accepted
+     * (i.e. when the server accepts only parts of the data and rejects the rest)
+     * the server MUST initialize the `partial_success` field and MUST
+     * set the `rejected_<signal>` with the number of items it rejected.
+     *
+     * Servers MAY also make use of the `partial_success` field to convey
+     * warnings/suggestions to senders even when the request was fully accepted.
+     * In such cases, the `rejected_<signal>` MUST have a value of `0` and
+     * the `error_message` MUST be non-empty.
+     *
+     * A `partial_success` message with an empty value (rejected_<signal> = 0 and
+     * `error_message` = "") is equivalent to it not being set/present. Senders
+     * SHOULD interpret it the same way as in the full success case.
+     *
+     * @generated from field: opentelemetry.proto.collector.profiles.v1development.ExportProfilesPartialSuccess partial_success = 1;
+     */
+    partialSuccess?: ExportProfilesPartialSuccess;
+};
+/**
+ * Describes the message opentelemetry.proto.collector.profiles.v1development.ExportProfilesServiceResponse.
+ * Use `create(ExportProfilesServiceResponseSchema)` to create a new message.
+ */
+export declare const ExportProfilesServiceResponseSchema: GenMessage<ExportProfilesServiceResponse>;
+/**
+ * @generated from message opentelemetry.proto.collector.profiles.v1development.ExportProfilesPartialSuccess
+ */
+export type ExportProfilesPartialSuccess = Message<"opentelemetry.proto.collector.profiles.v1development.ExportProfilesPartialSuccess"> & {
+    /**
+     * The number of rejected profiles.
+     *
+     * A `rejected_<signal>` field holding a `0` value indicates that the
+     * request was fully accepted.
+     *
+     * @generated from field: int64 rejected_profiles = 1;
+     */
+    rejectedProfiles: bigint;
+    /**
+     * A developer-facing human-readable message in English. It should be used
+     * either to explain why the server rejected parts of the data during a partial
+     * success or to convey warnings/suggestions during a full success. The message
+     * should offer guidance on how users can address such issues.
+     *
+     * error_message is an optional field. An error_message with an empty value
+     * is equivalent to it not being set.
+     *
+     * @generated from field: string error_message = 2;
+     */
+    errorMessage: string;
+};
+/**
+ * Describes the message opentelemetry.proto.collector.profiles.v1development.ExportProfilesPartialSuccess.
+ * Use `create(ExportProfilesPartialSuccessSchema)` to create a new message.
+ */
+export declare const ExportProfilesPartialSuccessSchema: GenMessage<ExportProfilesPartialSuccess>;
+/**
+ * Service that can be used to push profiles between one Application instrumented with
+ * OpenTelemetry and a collector, or between a collector and a central collector.
+ *
+ * @generated from service opentelemetry.proto.collector.profiles.v1development.ProfilesService
+ */
+export declare const ProfilesService: GenService<{
+    /**
+     * @generated from rpc opentelemetry.proto.collector.profiles.v1development.ProfilesService.Export
+     */
+    export: {
+        methodKind: "unary";
+        input: typeof ExportProfilesServiceRequestSchema;
+        output: typeof ExportProfilesServiceResponseSchema;
+    };
+}>;
+//# sourceMappingURL=profiles_service_pb.d.ts.map

package/dist/generated/opentelemetry/proto/collector/profiles/v1development/profiles_service_pb.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"profiles_service_pb.d.ts","sourceRoot":"","sources":["../../../../../../../src/generated/opentelemetry/proto/collector/profiles/v1development/profiles_service_pb.ts"],"names":[],"mappings":"AAkBA,OAAO,KAAK,EAAE,OAAO,EAAE,UAAU,EAAE,UAAU,EAAE,MAAM,8BAA8B,CAAC;AAEpF,OAAO,KAAK,EAAE,kBAAkB,EAAE,gBAAgB,EAAE,MAAM,gDAAgD,CAAC;AAE3G,OAAO,KAAK,EAAE,OAAO,EAAE,MAAM,oBAAoB,CAAC;AAElD;;GAEG;AACH,eAAO,MAAM,0EAA0E,EAAE,OACuwC,CAAC;AAEj2C;;GAEG;AACH,MAAM,MAAM,4BAA4B,GAAG,OAAO,CAAC,mFAAmF,CAAC,GAAG;IACxI;;;;;;;;OAQG;IACH,gBAAgB,EAAE,gBAAgB,EAAE,CAAC;IAErC;;;;OAIG;IACH,UAAU,CAAC,EAAE,kBAAkB,CAAC;CACjC,CAAC;AAEF;;;GAGG;AACH,eAAO,MAAM,kCAAkC,EAAE,UAAU,CAAC,4BAA4B,CACI,CAAC;AAE7F;;GAEG;AACH,MAAM,MAAM,6BAA6B,GAAG,OAAO,CAAC,oFAAoF,CAAC,GAAG;IAC1I;;;;;;;;;;;;;;;;;;OAkBG;IACH,cAAc,CAAC,EAAE,4BAA4B,CAAC;CAC/C,CAAC;AAEF;;;GAGG;AACH,eAAO,MAAM,mCAAmC,EAAE,UAAU,CAAC,6BAA6B,CACE,CAAC;AAE7F;;GAEG;AACH,MAAM,MAAM,4BAA4B,GAAG,OAAO,CAAC,mFAAmF,CAAC,GAAG;IACxI;;;;;;;OAOG;IACH,gBAAgB,EAAE,MAAM,CAAC;IAEzB;;;;;;;;;;OAUG;IACH,YAAY,EAAE,MAAM,CAAC;CACtB,CAAC;AAEF;;;GAGG;AACH,eAAO,MAAM,kCAAkC,EAAE,UAAU,CAAC,4BAA4B,CACI,CAAC;AAE7F;;;;;GAKG;AACH,eAAO,MAAM,eAAe,EAAE,UAAU,CAAC;IACvC;;OAEG;IACH,MAAM,EAAE;QACN,UAAU,EAAE,OAAO,CAAC;QACpB,KAAK,EAAE,OAAO,kCAAkC,CAAC;QACjD,MAAM,EAAE,OAAO,mCAAmC,CAAC;KACpD,CAAC;CACH,CAC2F,CAAC"}

package/dist/generated/opentelemetry/proto/collector/profiles/v1development/profiles_service_pb.js

@@ -0,0 +1,42 @@
+// Copyright 2023, OpenTelemetry Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+import { fileDesc, messageDesc, serviceDesc } from "@bufbuild/protobuf/codegenv2";
+import { file_opentelemetry_proto_profiles_v1development_profiles } from "../../../profiles/v1development/profiles_pb.js";
+/**
+ * Describes the file opentelemetry/proto/collector/profiles/v1development/profiles_service.proto.
+ */
+export const file_opentelemetry_proto_collector_profiles_v1development_profiles_service = /*@__PURE__*/ fileDesc("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", [file_opentelemetry_proto_profiles_v1development_profiles]);
+/**
+ * Describes the message opentelemetry.proto.collector.profiles.v1development.ExportProfilesServiceRequest.
+ * Use `create(ExportProfilesServiceRequestSchema)` to create a new message.
+ */
+export const ExportProfilesServiceRequestSchema = /*@__PURE__*/ messageDesc(file_opentelemetry_proto_collector_profiles_v1development_profiles_service, 0);
+/**
+ * Describes the message opentelemetry.proto.collector.profiles.v1development.ExportProfilesServiceResponse.
+ * Use `create(ExportProfilesServiceResponseSchema)` to create a new message.
+ */
+export const ExportProfilesServiceResponseSchema = /*@__PURE__*/ messageDesc(file_opentelemetry_proto_collector_profiles_v1development_profiles_service, 1);
+/**
+ * Describes the message opentelemetry.proto.collector.profiles.v1development.ExportProfilesPartialSuccess.
+ * Use `create(ExportProfilesPartialSuccessSchema)` to create a new message.
+ */
+export const ExportProfilesPartialSuccessSchema = /*@__PURE__*/ messageDesc(file_opentelemetry_proto_collector_profiles_v1development_profiles_service, 2);
+/**
+ * Service that can be used to push profiles between one Application instrumented with
+ * OpenTelemetry and a collector, or between a collector and a central collector.
+ *
+ * @generated from service opentelemetry.proto.collector.profiles.v1development.ProfilesService
+ */
+export const ProfilesService = /*@__PURE__*/ serviceDesc(file_opentelemetry_proto_collector_profiles_v1development_profiles_service, 0);
+//# sourceMappingURL=profiles_service_pb.js.map

package/dist/generated/opentelemetry/proto/collector/profiles/v1development/profiles_service_pb.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"profiles_service_pb.js","sourceRoot":"","sources":["../../../../../../../src/generated/opentelemetry/proto/collector/profiles/v1development/profiles_service_pb.ts"],"names":[],"mappings":"AAAA,wCAAwC;AACxC,EAAE;AACF,kEAAkE;AAClE,mEAAmE;AACnE,0CAA0C;AAC1C,EAAE;AACF,iDAAiD;AACjD,EAAE;AACF,sEAAsE;AACtE,oEAAoE;AACpE,2EAA2E;AAC3E,sEAAsE;AACtE,iCAAiC;AAOjC,OAAO,EAAE,QAAQ,EAAE,WAAW,EAAE,WAAW,EAAE,MAAM,8BAA8B,CAAC;AAElF,OAAO,EAAE,wDAAwD,EAAE,MAAM,gDAAgD,CAAC;AAG1H;;GAEG;AACH,MAAM,CAAC,MAAM,0EAA0E,GAAY,aAAa,CAC9G,QAAQ,CAAC,wxCAAwxC,EAAE,CAAC,wDAAwD,CAAC,CAAC,CAAC;AAyBj2C;;;GAGG;AACH,MAAM,CAAC,MAAM,kCAAkC,GAA6C,aAAa,CACvG,WAAW,CAAC,0EAA0E,EAAE,CAAC,CAAC,CAAC;AA4B7F;;;GAGG;AACH,MAAM,CAAC,MAAM,mCAAmC,GAA8C,aAAa,CACzG,WAAW,CAAC,0EAA0E,EAAE,CAAC,CAAC,CAAC;AA8B7F;;;GAGG;AACH,MAAM,CAAC,MAAM,kCAAkC,GAA6C,aAAa,CACvG,WAAW,CAAC,0EAA0E,EAAE,CAAC,CAAC,CAAC;AAE7F;;;;;GAKG;AACH,MAAM,CAAC,MAAM,eAAe,GASvB,aAAa,CAChB,WAAW,CAAC,0EAA0E,EAAE,CAAC,CAAC,CAAC"}

package/dist/generated/opentelemetry/proto/collector/trace/v1/trace_service_pb.d.ts

@@ -0,0 +1,106 @@
+import type { GenFile, GenMessage, GenService } from "@bufbuild/protobuf/codegenv2";
+import type { ResourceSpans } from "../../../trace/v1/trace_pb.js";
+import type { Message } from "@bufbuild/protobuf";
+/**
+ * Describes the file opentelemetry/proto/collector/trace/v1/trace_service.proto.
+ */
+export declare const file_opentelemetry_proto_collector_trace_v1_trace_service: GenFile;
+/**
+ * @generated from message opentelemetry.proto.collector.trace.v1.ExportTraceServiceRequest
+ */
+export type ExportTraceServiceRequest = Message<"opentelemetry.proto.collector.trace.v1.ExportTraceServiceRequest"> & {
+    /**
+     * An array of ResourceSpans.
+     * For data coming from a single resource this array will typically contain one
+     * element. Intermediary nodes (such as OpenTelemetry Collector) that receive
+     * data from multiple origins typically batch the data before forwarding further and
+     * in that case this array will contain multiple elements.
+     *
+     * @generated from field: repeated opentelemetry.proto.trace.v1.ResourceSpans resource_spans = 1;
+     */
+    resourceSpans: ResourceSpans[];
+};
+/**
+ * Describes the message opentelemetry.proto.collector.trace.v1.ExportTraceServiceRequest.
+ * Use `create(ExportTraceServiceRequestSchema)` to create a new message.
+ */
+export declare const ExportTraceServiceRequestSchema: GenMessage<ExportTraceServiceRequest>;
+/**
+ * @generated from message opentelemetry.proto.collector.trace.v1.ExportTraceServiceResponse
+ */
+export type ExportTraceServiceResponse = Message<"opentelemetry.proto.collector.trace.v1.ExportTraceServiceResponse"> & {
+    /**
+     * The details of a partially successful export request.
+     *
+     * If the request is only partially accepted
+     * (i.e. when the server accepts only parts of the data and rejects the rest)
+     * the server MUST initialize the `partial_success` field and MUST
+     * set the `rejected_<signal>` with the number of items it rejected.
+     *
+     * Servers MAY also make use of the `partial_success` field to convey
+     * warnings/suggestions to senders even when the request was fully accepted.
+     * In such cases, the `rejected_<signal>` MUST have a value of `0` and
+     * the `error_message` MUST be non-empty.
+     *
+     * A `partial_success` message with an empty value (rejected_<signal> = 0 and
+     * `error_message` = "") is equivalent to it not being set/present. Senders
+     * SHOULD interpret it the same way as in the full success case.
+     *
+     * @generated from field: opentelemetry.proto.collector.trace.v1.ExportTracePartialSuccess partial_success = 1;
+     */
+    partialSuccess?: ExportTracePartialSuccess;
+};
+/**
+ * Describes the message opentelemetry.proto.collector.trace.v1.ExportTraceServiceResponse.
+ * Use `create(ExportTraceServiceResponseSchema)` to create a new message.
+ */
+export declare const ExportTraceServiceResponseSchema: GenMessage<ExportTraceServiceResponse>;
+/**
+ * @generated from message opentelemetry.proto.collector.trace.v1.ExportTracePartialSuccess
+ */
+export type ExportTracePartialSuccess = Message<"opentelemetry.proto.collector.trace.v1.ExportTracePartialSuccess"> & {
+    /**
+     * The number of rejected spans.
+     *
+     * A `rejected_<signal>` field holding a `0` value indicates that the
+     * request was fully accepted.
+     *
+     * @generated from field: int64 rejected_spans = 1;
+     */
+    rejectedSpans: bigint;
+    /**
+     * A developer-facing human-readable message in English. It should be used
+     * either to explain why the server rejected parts of the data during a partial
+     * success or to convey warnings/suggestions during a full success. The message
+     * should offer guidance on how users can address such issues.
+     *
+     * error_message is an optional field. An error_message with an empty value
+     * is equivalent to it not being set.
+     *
+     * @generated from field: string error_message = 2;
+     */
+    errorMessage: string;
+};
+/**
+ * Describes the message opentelemetry.proto.collector.trace.v1.ExportTracePartialSuccess.
+ * Use `create(ExportTracePartialSuccessSchema)` to create a new message.
+ */
+export declare const ExportTracePartialSuccessSchema: GenMessage<ExportTracePartialSuccess>;
+/**
+ * Service that can be used to push spans between one Application instrumented with
+ * OpenTelemetry and a collector, or between a collector and a central collector (in this
+ * case spans are sent/received to/from multiple Applications).
+ *
+ * @generated from service opentelemetry.proto.collector.trace.v1.TraceService
+ */
+export declare const TraceService: GenService<{
+    /**
+     * @generated from rpc opentelemetry.proto.collector.trace.v1.TraceService.Export
+     */
+    export: {
+        methodKind: "unary";
+        input: typeof ExportTraceServiceRequestSchema;
+        output: typeof ExportTraceServiceResponseSchema;
+    };
+}>;
+//# sourceMappingURL=trace_service_pb.d.ts.map

package/dist/generated/opentelemetry/proto/collector/trace/v1/trace_service_pb.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"trace_service_pb.d.ts","sourceRoot":"","sources":["../../../../../../../src/generated/opentelemetry/proto/collector/trace/v1/trace_service_pb.ts"],"names":[],"mappings":"AAkBA,OAAO,KAAK,EAAE,OAAO,EAAE,UAAU,EAAE,UAAU,EAAE,MAAM,8BAA8B,CAAC;AAEpF,OAAO,KAAK,EAAE,aAAa,EAAE,MAAM,+BAA+B,CAAC;AAEnE,OAAO,KAAK,EAAE,OAAO,EAAE,MAAM,oBAAoB,CAAC;AAElD;;GAEG;AACH,eAAO,MAAM,yDAAyD,EAAE,OAC47B,CAAC;AAErgC;;GAEG;AACH,MAAM,MAAM,yBAAyB,GAAG,OAAO,CAAC,kEAAkE,CAAC,GAAG;IACpH;;;;;;;;OAQG;IACH,aAAa,EAAE,aAAa,EAAE,CAAC;CAChC,CAAC;AAEF;;;GAGG;AACH,eAAO,MAAM,+BAA+B,EAAE,UAAU,CAAC,yBAAyB,CACP,CAAC;AAE5E;;GAEG;AACH,MAAM,MAAM,0BAA0B,GAAG,OAAO,CAAC,mEAAmE,CAAC,GAAG;IACtH;;;;;;;;;;;;;;;;;;OAkBG;IACH,cAAc,CAAC,EAAE,yBAAyB,CAAC;CAC5C,CAAC;AAEF;;;GAGG;AACH,eAAO,MAAM,gCAAgC,EAAE,UAAU,CAAC,0BAA0B,CACT,CAAC;AAE5E;;GAEG;AACH,MAAM,MAAM,yBAAyB,GAAG,OAAO,CAAC,kEAAkE,CAAC,GAAG;IACpH;;;;;;;OAOG;IACH,aAAa,EAAE,MAAM,CAAC;IAEtB;;;;;;;;;;OAUG;IACH,YAAY,EAAE,MAAM,CAAC;CACtB,CAAC;AAEF;;;GAGG;AACH,eAAO,MAAM,+BAA+B,EAAE,UAAU,CAAC,yBAAyB,CACP,CAAC;AAE5E;;;;;;GAMG;AACH,eAAO,MAAM,YAAY,EAAE,UAAU,CAAC;IACpC;;OAEG;IACH,MAAM,EAAE;QACN,UAAU,EAAE,OAAO,CAAC;QACpB,KAAK,EAAE,OAAO,+BAA+B,CAAC;QAC9C,MAAM,EAAE,OAAO,gCAAgC,CAAC;KACjD,CAAC;CACH,CAC0E,CAAC"}

package/dist/generated/opentelemetry/proto/collector/trace/v1/trace_service_pb.js

@@ -0,0 +1,43 @@
+// Copyright 2019, OpenTelemetry Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+import { fileDesc, messageDesc, serviceDesc } from "@bufbuild/protobuf/codegenv2";
+import { file_opentelemetry_proto_trace_v1_trace } from "../../../trace/v1/trace_pb.js";
+/**
+ * Describes the file opentelemetry/proto/collector/trace/v1/trace_service.proto.
+ */
+export const file_opentelemetry_proto_collector_trace_v1_trace_service = /*@__PURE__*/ fileDesc("CjpvcGVudGVsZW1ldHJ5L3Byb3RvL2NvbGxlY3Rvci90cmFjZS92MS90cmFjZV9zZXJ2aWNlLnByb3RvEiZvcGVudGVsZW1ldHJ5LnByb3RvLmNvbGxlY3Rvci50cmFjZS52MSJgChlFeHBvcnRUcmFjZVNlcnZpY2VSZXF1ZXN0EkMKDnJlc291cmNlX3NwYW5zGAEgAygLMisub3BlbnRlbGVtZXRyeS5wcm90by50cmFjZS52MS5SZXNvdXJjZVNwYW5zIngKGkV4cG9ydFRyYWNlU2VydmljZVJlc3BvbnNlEloKD3BhcnRpYWxfc3VjY2VzcxgBIAEoCzJBLm9wZW50ZWxlbWV0cnkucHJvdG8uY29sbGVjdG9yLnRyYWNlLnYxLkV4cG9ydFRyYWNlUGFydGlhbFN1Y2Nlc3MiSgoZRXhwb3J0VHJhY2VQYXJ0aWFsU3VjY2VzcxIWCg5yZWplY3RlZF9zcGFucxgBIAEoAxIVCg1lcnJvcl9tZXNzYWdlGAIgASgJMqIBCgxUcmFjZVNlcnZpY2USkQEKBkV4cG9ydBJBLm9wZW50ZWxlbWV0cnkucHJvdG8uY29sbGVjdG9yLnRyYWNlLnYxLkV4cG9ydFRyYWNlU2VydmljZVJlcXVlc3QaQi5vcGVudGVsZW1ldHJ5LnByb3RvLmNvbGxlY3Rvci50cmFjZS52MS5FeHBvcnRUcmFjZVNlcnZpY2VSZXNwb25zZSIAQpwBCilpby5vcGVudGVsZW1ldHJ5LnByb3RvLmNvbGxlY3Rvci50cmFjZS52MUIRVHJhY2VTZXJ2aWNlUHJvdG9QAVoxZ28ub3BlbnRlbGVtZXRyeS5pby9wcm90by9vdGxwL2NvbGxlY3Rvci90cmFjZS92MaoCJk9wZW5UZWxlbWV0cnkuUHJvdG8uQ29sbGVjdG9yLlRyYWNlLlYxYgZwcm90bzM", [file_opentelemetry_proto_trace_v1_trace]);
+/**
+ * Describes the message opentelemetry.proto.collector.trace.v1.ExportTraceServiceRequest.
+ * Use `create(ExportTraceServiceRequestSchema)` to create a new message.
+ */
+export const ExportTraceServiceRequestSchema = /*@__PURE__*/ messageDesc(file_opentelemetry_proto_collector_trace_v1_trace_service, 0);
+/**
+ * Describes the message opentelemetry.proto.collector.trace.v1.ExportTraceServiceResponse.
+ * Use `create(ExportTraceServiceResponseSchema)` to create a new message.
+ */
+export const ExportTraceServiceResponseSchema = /*@__PURE__*/ messageDesc(file_opentelemetry_proto_collector_trace_v1_trace_service, 1);
+/**
+ * Describes the message opentelemetry.proto.collector.trace.v1.ExportTracePartialSuccess.
+ * Use `create(ExportTracePartialSuccessSchema)` to create a new message.
+ */
+export const ExportTracePartialSuccessSchema = /*@__PURE__*/ messageDesc(file_opentelemetry_proto_collector_trace_v1_trace_service, 2);
+/**
+ * Service that can be used to push spans between one Application instrumented with
+ * OpenTelemetry and a collector, or between a collector and a central collector (in this
+ * case spans are sent/received to/from multiple Applications).
+ *
+ * @generated from service opentelemetry.proto.collector.trace.v1.TraceService
+ */
+export const TraceService = /*@__PURE__*/ serviceDesc(file_opentelemetry_proto_collector_trace_v1_trace_service, 0);
+//# sourceMappingURL=trace_service_pb.js.map

package/dist/generated/opentelemetry/proto/collector/trace/v1/trace_service_pb.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"trace_service_pb.js","sourceRoot":"","sources":["../../../../../../../src/generated/opentelemetry/proto/collector/trace/v1/trace_service_pb.ts"],"names":[],"mappings":"AAAA,wCAAwC;AACxC,EAAE;AACF,kEAAkE;AAClE,mEAAmE;AACnE,0CAA0C;AAC1C,EAAE;AACF,iDAAiD;AACjD,EAAE;AACF,sEAAsE;AACtE,oEAAoE;AACpE,2EAA2E;AAC3E,sEAAsE;AACtE,iCAAiC;AAOjC,OAAO,EAAE,QAAQ,EAAE,WAAW,EAAE,WAAW,EAAE,MAAM,8BAA8B,CAAC;AAElF,OAAO,EAAE,uCAAuC,EAAE,MAAM,+BAA+B,CAAC;AAGxF;;GAEG;AACH,MAAM,CAAC,MAAM,yDAAyD,GAAY,aAAa,CAC7F,QAAQ,CAAC,68BAA68B,EAAE,CAAC,uCAAuC,CAAC,CAAC,CAAC;AAkBrgC;;;GAGG;AACH,MAAM,CAAC,MAAM,+BAA+B,GAA0C,aAAa,CACjG,WAAW,CAAC,yDAAyD,EAAE,CAAC,CAAC,CAAC;AA4B5E;;;GAGG;AACH,MAAM,CAAC,MAAM,gCAAgC,GAA2C,aAAa,CACnG,WAAW,CAAC,yDAAyD,EAAE,CAAC,CAAC,CAAC;AA8B5E;;;GAGG;AACH,MAAM,CAAC,MAAM,+BAA+B,GAA0C,aAAa,CACjG,WAAW,CAAC,yDAAyD,EAAE,CAAC,CAAC,CAAC;AAE5E;;;;;;GAMG;AACH,MAAM,CAAC,MAAM,YAAY,GASpB,aAAa,CAChB,WAAW,CAAC,yDAAyD,EAAE,CAAC,CAAC,CAAC"}

package/dist/generated/opentelemetry/proto/common/v1/common_pb.d.ts

@@ -0,0 +1,243 @@
+import type { GenFile, GenMessage } from "@bufbuild/protobuf/codegenv2";
+import type { Message } from "@bufbuild/protobuf";
+/**
+ * Describes the file opentelemetry/proto/common/v1/common.proto.
+ */
+export declare const file_opentelemetry_proto_common_v1_common: GenFile;
+/**
+ * Represents any type of attribute value. AnyValue may contain a
+ * primitive value such as a string or integer or it may contain an arbitrary nested
+ * object containing arrays, key-value lists and primitives.
+ *
+ * @generated from message opentelemetry.proto.common.v1.AnyValue
+ */
+export type AnyValue = Message<"opentelemetry.proto.common.v1.AnyValue"> & {
+    /**
+     * The value is one of the listed fields. It is valid for all values to be unspecified
+     * in which case this AnyValue is considered to be "empty".
+     *
+     * @generated from oneof opentelemetry.proto.common.v1.AnyValue.value
+     */
+    value: {
+        /**
+         * @generated from field: string string_value = 1;
+         */
+        value: string;
+        case: "stringValue";
+    } | {
+        /**
+         * @generated from field: bool bool_value = 2;
+         */
+        value: boolean;
+        case: "boolValue";
+    } | {
+        /**
+         * @generated from field: int64 int_value = 3;
+         */
+        value: bigint;
+        case: "intValue";
+    } | {
+        /**
+         * @generated from field: double double_value = 4;
+         */
+        value: number;
+        case: "doubleValue";
+    } | {
+        /**
+         * @generated from field: opentelemetry.proto.common.v1.ArrayValue array_value = 5;
+         */
+        value: ArrayValue;
+        case: "arrayValue";
+    } | {
+        /**
+         * @generated from field: opentelemetry.proto.common.v1.KeyValueList kvlist_value = 6;
+         */
+        value: KeyValueList;
+        case: "kvlistValue";
+    } | {
+        /**
+         * @generated from field: bytes bytes_value = 7;
+         */
+        value: Uint8Array;
+        case: "bytesValue";
+    } | {
+        case: undefined;
+        value?: undefined;
+    };
+};
+/**
+ * Describes the message opentelemetry.proto.common.v1.AnyValue.
+ * Use `create(AnyValueSchema)` to create a new message.
+ */
+export declare const AnyValueSchema: GenMessage<AnyValue>;
+/**
+ * ArrayValue is a list of AnyValue messages. We need ArrayValue as a message
+ * since oneof in AnyValue does not allow repeated fields.
+ *
+ * @generated from message opentelemetry.proto.common.v1.ArrayValue
+ */
+export type ArrayValue = Message<"opentelemetry.proto.common.v1.ArrayValue"> & {
+    /**
+     * Array of values. The array may be empty (contain 0 elements).
+     *
+     * @generated from field: repeated opentelemetry.proto.common.v1.AnyValue values = 1;
+     */
+    values: AnyValue[];
+};
+/**
+ * Describes the message opentelemetry.proto.common.v1.ArrayValue.
+ * Use `create(ArrayValueSchema)` to create a new message.
+ */
+export declare const ArrayValueSchema: GenMessage<ArrayValue>;
+/**
+ * KeyValueList is a list of KeyValue messages. We need KeyValueList as a message
+ * since `oneof` in AnyValue does not allow repeated fields. Everywhere else where we need
+ * a list of KeyValue messages (e.g. in Span) we use `repeated KeyValue` directly to
+ * avoid unnecessary extra wrapping (which slows down the protocol). The 2 approaches
+ * are semantically equivalent.
+ *
+ * @generated from message opentelemetry.proto.common.v1.KeyValueList
+ */
+export type KeyValueList = Message<"opentelemetry.proto.common.v1.KeyValueList"> & {
+    /**
+     * A collection of key/value pairs of key-value pairs. The list may be empty (may
+     * contain 0 elements).
+     *
+     * The keys MUST be unique (it is not allowed to have more than one
+     * value with the same key).
+     * The behavior of software that receives duplicated keys can be unpredictable.
+     *
+     * @generated from field: repeated opentelemetry.proto.common.v1.KeyValue values = 1;
+     */
+    values: KeyValue[];
+};
+/**
+ * Describes the message opentelemetry.proto.common.v1.KeyValueList.
+ * Use `create(KeyValueListSchema)` to create a new message.
+ */
+export declare const KeyValueListSchema: GenMessage<KeyValueList>;
+/**
+ * Represents a key-value pair that is used to store Span attributes, Link
+ * attributes, etc.
+ *
+ * @generated from message opentelemetry.proto.common.v1.KeyValue
+ */
+export type KeyValue = Message<"opentelemetry.proto.common.v1.KeyValue"> & {
+    /**
+     * The key name of the pair.
+     *
+     * @generated from field: string key = 1;
+     */
+    key: string;
+    /**
+     * The value of the pair.
+     *
+     * @generated from field: opentelemetry.proto.common.v1.AnyValue value = 2;
+     */
+    value?: AnyValue;
+};
+/**
+ * Describes the message opentelemetry.proto.common.v1.KeyValue.
+ * Use `create(KeyValueSchema)` to create a new message.
+ */
+export declare const KeyValueSchema: GenMessage<KeyValue>;
+/**
+ * InstrumentationScope is a message representing the instrumentation scope information
+ * such as the fully qualified name and version.
+ *
+ * @generated from message opentelemetry.proto.common.v1.InstrumentationScope
+ */
+export type InstrumentationScope = Message<"opentelemetry.proto.common.v1.InstrumentationScope"> & {
+    /**
+     * A name denoting the Instrumentation scope.
+     * An empty instrumentation scope name means the name is unknown.
+     *
+     * @generated from field: string name = 1;
+     */
+    name: string;
+    /**
+     * Defines the version of the instrumentation scope.
+     * An empty instrumentation scope version means the version is unknown.
+     *
+     * @generated from field: string version = 2;
+     */
+    version: string;
+    /**
+     * Additional attributes that describe the scope. [Optional].
+     * Attribute keys MUST be unique (it is not allowed to have more than one
+     * attribute with the same key).
+     * The behavior of software that receives duplicated keys can be unpredictable.
+     *
+     * @generated from field: repeated opentelemetry.proto.common.v1.KeyValue attributes = 3;
+     */
+    attributes: KeyValue[];
+    /**
+     * The number of attributes that were discarded. Attributes
+     * can be discarded because their keys are too long or because there are too many
+     * attributes. If this value is 0, then no attributes were dropped.
+     *
+     * @generated from field: uint32 dropped_attributes_count = 4;
+     */
+    droppedAttributesCount: number;
+};
+/**
+ * Describes the message opentelemetry.proto.common.v1.InstrumentationScope.
+ * Use `create(InstrumentationScopeSchema)` to create a new message.
+ */
+export declare const InstrumentationScopeSchema: GenMessage<InstrumentationScope>;
+/**
+ * A reference to an Entity.
+ * Entity represents an object of interest associated with produced telemetry: e.g spans, metrics, profiles, or logs.
+ *
+ * Status: [Development]
+ *
+ * @generated from message opentelemetry.proto.common.v1.EntityRef
+ */
+export type EntityRef = Message<"opentelemetry.proto.common.v1.EntityRef"> & {
+    /**
+     * The Schema URL, if known. This is the identifier of the Schema that the entity data
+     * is recorded in. To learn more about Schema URL see
+     * https://opentelemetry.io/docs/specs/otel/schemas/#schema-url
+     *
+     * This schema_url applies to the data in this message and to the Resource attributes
+     * referenced by id_keys and description_keys.
+     * TODO: discuss if we are happy with this somewhat complicated definition of what
+     * the schema_url applies to.
+     *
+     * This field obsoletes the schema_url field in ResourceMetrics/ResourceSpans/ResourceLogs.
+     *
+     * @generated from field: string schema_url = 1;
+     */
+    schemaUrl: string;
+    /**
+     * Defines the type of the entity. MUST not change during the lifetime of the entity.
+     * For example: "service" or "host". This field is required and MUST not be empty
+     * for valid entities.
+     *
+     * @generated from field: string type = 2;
+     */
+    type: string;
+    /**
+     * Attribute Keys that identify the entity.
+     * MUST not change during the lifetime of the entity. The Id must contain at least one attribute.
+     * These keys MUST exist in the containing {message}.attributes.
+     *
+     * @generated from field: repeated string id_keys = 3;
+     */
+    idKeys: string[];
+    /**
+     * Descriptive (non-identifying) attribute keys of the entity.
+     * MAY change over the lifetime of the entity. MAY be empty.
+     * These attribute keys are not part of entity's identity.
+     * These keys MUST exist in the containing {message}.attributes.
+     *
+     * @generated from field: repeated string description_keys = 4;
+     */
+    descriptionKeys: string[];
+};
+/**
+ * Describes the message opentelemetry.proto.common.v1.EntityRef.
+ * Use `create(EntityRefSchema)` to create a new message.
+ */
+export declare const EntityRefSchema: GenMessage<EntityRef>;
+//# sourceMappingURL=common_pb.d.ts.map

package/dist/generated/opentelemetry/proto/common/v1/common_pb.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"common_pb.d.ts","sourceRoot":"","sources":["../../../../../../src/generated/opentelemetry/proto/common/v1/common_pb.ts"],"names":[],"mappings":"AAkBA,OAAO,KAAK,EAAE,OAAO,EAAE,UAAU,EAAE,MAAM,8BAA8B,CAAC;AAExE,OAAO,KAAK,EAAE,OAAO,EAAE,MAAM,oBAAoB,CAAC;AAElD;;GAEG;AACH,eAAO,MAAM,yCAAyC,EAAE,OACksC,CAAC;AAE3vC;;;;;;GAMG;AACH,MAAM,MAAM,QAAQ,GAAG,OAAO,CAAC,wCAAwC,CAAC,GAAG;IACzE;;;;;OAKG;IACH,KAAK,EAAE;QACL;;WAEG;QACH,KAAK,EAAE,MAAM,CAAC;QACd,IAAI,EAAE,aAAa,CAAC;KACrB,GAAG;QACF;;WAEG;QACH,KAAK,EAAE,OAAO,CAAC;QACf,IAAI,EAAE,WAAW,CAAC;KACnB,GAAG;QACF;;WAEG;QACH,KAAK,EAAE,MAAM,CAAC;QACd,IAAI,EAAE,UAAU,CAAC;KAClB,GAAG;QACF;;WAEG;QACH,KAAK,EAAE,MAAM,CAAC;QACd,IAAI,EAAE,aAAa,CAAC;KACrB,GAAG;QACF;;WAEG;QACH,KAAK,EAAE,UAAU,CAAC;QAClB,IAAI,EAAE,YAAY,CAAC;KACpB,GAAG;QACF;;WAEG;QACH,KAAK,EAAE,YAAY,CAAC;QACpB,IAAI,EAAE,aAAa,CAAC;KACrB,GAAG;QACF;;WAEG;QACH,KAAK,EAAE,UAAU,CAAC;QAClB,IAAI,EAAE,YAAY,CAAC;KACpB,GAAG;QAAE,IAAI,EAAE,SAAS,CAAC;QAAC,KAAK,CAAC,EAAE,SAAS,CAAA;KAAE,CAAC;CAC5C,CAAC;AAEF;;;GAGG;AACH,eAAO,MAAM,cAAc,EAAE,UAAU,CAAC,QAAQ,CACW,CAAC;AAE5D;;;;;GAKG;AACH,MAAM,MAAM,UAAU,GAAG,OAAO,CAAC,0CAA0C,CAAC,GAAG;IAC7E;;;;OAIG;IACH,MAAM,EAAE,QAAQ,EAAE,CAAC;CACpB,CAAC;AAEF;;;GAGG;AACH,eAAO,MAAM,gBAAgB,EAAE,UAAU,CAAC,UAAU,CACO,CAAC;AAE5D;;;;;;;;GAQG;AACH,MAAM,MAAM,YAAY,GAAG,OAAO,CAAC,4CAA4C,CAAC,GAAG;IACjF;;;;;;;;;OASG;IACH,MAAM,EAAE,QAAQ,EAAE,CAAC;CACpB,CAAC;AAEF;;;GAGG;AACH,eAAO,MAAM,kBAAkB,EAAE,UAAU,CAAC,YAAY,CACG,CAAC;AAE5D;;;;;GAKG;AACH,MAAM,MAAM,QAAQ,GAAG,OAAO,CAAC,wCAAwC,CAAC,GAAG;IACzE;;;;OAIG;IACH,GAAG,EAAE,MAAM,CAAC;IAEZ;;;;OAIG;IACH,KAAK,CAAC,EAAE,QAAQ,CAAC;CAClB,CAAC;AAEF;;;GAGG;AACH,eAAO,MAAM,cAAc,EAAE,UAAU,CAAC,QAAQ,CACW,CAAC;AAE5D;;;;;GAKG;AACH,MAAM,MAAM,oBAAoB,GAAG,OAAO,CAAC,oDAAoD,CAAC,GAAG;IACjG;;;;;OAKG;IACH,IAAI,EAAE,MAAM,CAAC;IAEb;;;;;OAKG;IACH,OAAO,EAAE,MAAM,CAAC;IAEhB;;;;;;;OAOG;IACH,UAAU,EAAE,QAAQ,EAAE,CAAC;IAEvB;;;;;;OAMG;IACH,sBAAsB,EAAE,MAAM,CAAC;CAChC,CAAC;AAEF;;;GAGG;AACH,eAAO,MAAM,0BAA0B,EAAE,UAAU,CAAC,oBAAoB,CACb,CAAC;AAE5D;;;;;;;GAOG;AACH,MAAM,MAAM,SAAS,GAAG,OAAO,CAAC,yCAAyC,CAAC,GAAG;IAC3E;;;;;;;;;;;;;OAaG;IACH,SAAS,EAAE,MAAM,CAAC;IAElB;;;;;;OAMG;IACH,IAAI,EAAE,MAAM,CAAC;IAEb;;;;;;OAMG;IACH,MAAM,EAAE,MAAM,EAAE,CAAC;IAEjB;;;;;;;OAOG;IACH,eAAe,EAAE,MAAM,EAAE,CAAC;CAC3B,CAAC;AAEF;;;GAGG;AACH,eAAO,MAAM,eAAe,EAAE,UAAU,CAAC,SAAS,CACS,CAAC"}