nodejs-poolcontroller 7.6.0 → 7.6.1

package/Changelog

@@ -1,216 +1,216 @@
-# Changelog
-## 7.6
-1. MasterTemp RS485 support for Nixie and IntelliCenter
-2. Nixie Valve Rotation delay
-3. Nixie Heater Cooldown delay
-4. Nixie Cleaner Start delay
-5. Nixie Cleaner Shutdown on Solar
-6. Nixie Delay Cancel
-
-## 7.5.1
-1. Backup/restore fixes
-2. Egg timer expiration
-3. Bug Fixes
-4. dashPanel/messageManager Filter
-5. RS485 refactor
-
-## 7.5
-1. Backup/restore
-2. Intellitouch add expansion modules
-## 7.4
-1. Filter object, emit, monitoring
-
-## 7.3.1
-1. Influx 2.0 support
-
-## 7.3
-1. Dynamic chlorinating % based on ORP demand for Nixie
-2. Docker creation updates
-
-## 7.2
-1. Refactor Intellichem and Chem Controllers
-
-## 7.1.1
-1. Added end time for circuits to show eggtimer/schedule off times
-2. Ultratemp updates
-3. Heater logic refactored
-4. Message response logic refactored
-5. Intellichem updates
-
-
-## 7.1.0
-1. Moved virtual chlorinator code and control to Nixie
-2. Moved virtual pump code and control to Nixie; Nixie supports SS, DS, SuperFlo, VS, VF, VSF
-3. MQTT changes
-4. Outbound processing for packets now has a scope.  Previously if an outbound packet would receive a response we would clear all of the similar packets off the queue.  EG if a user requests circuit 2 and 3 to be turned on, we would clear out the outbound message for 3.  Now the code is more selective about what "scope" is considered for a successful response.
-
-## 7.0.0
-1. Upgrades to setup/sync between njsPC and REM
-2. Significant steps to njsPC (Nixie) acting as a standalone pool controller (virtual controller heaters, move virtual controller code, etc.)
-3. Dependency updates (Typescript 4, Socket.io 4, etc)
-
-## 6.5.2
-1. Bug Fixes
-2. Schedule updates
-3. MQTT Binding updates
-4. LSI calcs for REM (in addition to CSI)
-
-## 6.5.1
-1. Init Touch bodies upon startup
-2. *Touch chlorinator fixes
-3. MQTT updates
-
-## 6.5.0
-1. Full compatibility with REM (Relay Equipment Manager) for hardware control (ph sensors, orp sensors, pumps, relays, flow sensors)
-1. Upgrades to Influx binding
-1. MQTT alternate bindings
-1. Many, many bug fixes
-
-## 6.1.0
-1. Chem controller
-1. MQTT native support
-1. Server based time for *Touch and other non-internet based OCP
-1. Version notifications
-1. IntelliCenter updates for dual bodies, 1.045/1.047 (partial) support
-1. Many bug fixes
-
-## 6.0.1
-1. Implement https (no basic auth yet)
-1. API documentation @ https://tagyoureit.github.io/nodejs-poolcontroller-api/
-1. Add timestamp to logs for API calls
-1. #200, #202
-
-## 6.0
-What's new in 6.0?s
-
-In short, everything!  6.0 is a complete re-write of the application.  Huge props to @rstrouse for his wisdom and guidance in refactoring the code.
-
-1. IntelliCenter - now supported
-1. Configuring and running the app - all new.  Start over with the Installation instructions.
-1. Automatic detection of your pool equipment.  Previous versions of the app would detect the configuration of your pool but you still had to tell the app if you had IntelliTouch/EasyTouch/IntelliCom.  This is now done automatically.
-1. Configuration and state information.  Config.json now only stores information related to the configuration of the app.  There are separate files in the /data directory that store (and persist) pool configuration and state information.
-1. API's - completely changed.  See separate API documentation (*link here)
-1. Outbound Sockets - Now more granular to make the web app more responsive
-1. Web app - Now a separate installion for a true client/server metaphore.
-1. Node v12+
-1. `Integrations` are now called `Bindings`.  Any integration built on 5.3 need to be upgraded to the binding format.  See Readme for a list of currently upgraded bindings.
-
-## 5.3.3
-#134
-
-## 5.3.1
-#132
-
-## 5.3.0
-Fix for #106
-Fix for "Error 60" messages
-Improved caching of files on browsers. Thanks @arrmo! Now files will be loaded once in the browser and kept in cache instead of reloaded each time.
-Improved handling of sessions and graceful closing of the HTTP(s) servers.
-
-## 5.2.0
-1. Node 6+ is supported.  This app no longer supports Node 4.
-1. Update of modules.  Make sure to run `npm i` or `npm upgrade` to get the latest.
-1. Much better support of multiple Intellibrite controllers.  We can read both controllers now.  There are still some issues with sending changes and help is needed to debug these.
-1. Chlorinator API calls (and UI) will now make changes through Intellitouch when available, or directly to the Intellichlor if it is standalone (aka using the virtual controller)
-1. Decoupled serial port and processing of packets.  Should help recovery upon packet errors.
-1. Implementation of #89.  Expansion boards are now (better) supported by setting variables in your config.json.  See the [config.json](#module_nodejs-poolController--config) section below.
-1. Fix for #95
-1. Fix for #99
-1. Fix for #100
-
-## 5.1.1 -
-1.  Renamed all 'valves' items to valve to be in line with singular renaming of items
-1.  InfluxDB - moved some items that were in tag fields to field keys; added valves
-1.  Added days of week (with editing) back to the schedules.  Not sure when they disappeared, but they are back now.  #92
-1.  Added MySQL integration to log all packets to a DB
-1.  Fixed PR #95 to allow sub-hour egg timers
-1.  Fixed Intellibrite bugs
-1.  Started to move some of the inter-communications to emitter events for better micro-services and shorter call stacks (easier debugging; loosely coupled code).
-1.  Changed some Influx tags/queries.
-
-## 5.1.0 -
-1. Intellibrite support - API's, Sockets and a WebUI.  Lights should have the 'Intellbrite' an their circuit function (set this up at the controller) to show up in this section.
-Will document more later, but...
-/light/mode/:mode
-/light/circuit/:circuit/setColor/:color
-/light/circuit/:circuit/setSwimDelay/:delay
-/light/circuit/:circuit/setPosition/:position
-
-See the constants.js file and the sections:
-  strIntellibriteModes (for modes)
-  lightColors (for setColor)
-
-## 5.0.1 -
-1. Fixed Influx error on startup #90
-1. Fixed bad characters in custom names
-
-## 5.0.0 -
-Make sure to run `npm upgrade`.  There are many package updates and changes.
-
- * Added add/delete/edit schedule
- * All sockets/API now singular (`circuits`->`circuit`)
- * All sockets/API data now returned with a JSON qualifier. EG `{pump:...}`, `{circuit:...}`
- * Intellichem decoding and display
- * Changes to `/config` endpoint.  It's now included with the `/all` end point since there would be quite a bit of duplication.  It still exists standalone (for now) but has much less information in it.
- * Moved `hideAux` setting from `configClient.json` (web UI settings) to `config.json` template.  In `config.json` template, moved
-    ```
-    {equipment: {controller: {circuitFriendlyNames:{1..20}}}}
-
-     // to
-
-    {equipment: {circuit: friendlyName:{1..20},
-                              hideAux: boolean
-                              },
-    }
-    ```
-    to be in line with the other equipment in the pool setup and accomodate the `hideAux` setting.
-
- * Fixed issue #82
- * Extra info from `/config` was being added to the circuit section in `config.json`
- * This release includes a new mechanism for updating config.json files. See notes in [config.json](#module_nodejs-poolController--config) section.
- * mDNS server.  Currently included for SmartThings integration, but in the future can be used for autodiscovery by other applications/devices.
- * New `/config` endpoint (beta) to allow applications to get a high level summary of the system.
- * Support for two separate (http/https) web servers, each/both with Auth, and also the option to redirect all http to https traffic.  Thanks to @arrmo for driving this with #65 and #68.
- * A UI for standalone pumps
- * All sockets and API's renamed to be SINGULAR.  Circuits -> circuit, Schedules->schedule, etc.
- * All returned JSON data (API/socket) now has the type qualifier per [#57](https://github.com/tagyoureit/nodejs-poolController/issues/57)
- * Make sure to run `npm upgrade`.  There are many package updates and changes.
- * Intellichem initial support.
- * Inactivity timer for both internal connections and web page connections.  If a connection is broken, it should re-establish itself automatically now.
- * SSDP for auto-discovery by SmartThings or other services
-
-## 4.0.0 -
- * Changed much in the config.json file
- * Save pump programs and chlorinator level to config.json
- * Added support for GPM with pumps
- * Check for newer versions of the app on github, and dismiss notifications until next release
- * Bootstrap configuration is automatically saved in clientConfig.json via UI actions
- * Started to introduce some promises into the workflow (mostly with read/write operations)
- * Added log-to-file option
- * Added capture for Ctrl-C/SIGINT to have a clean exit
- * Added InfluxDB database capabilities
- * Added support for reading the data from up to 16 pumps.  (You can still only control two.)
- * Support for up to 50 circuits, 8 pumps
- * Delay and Cancel Delay for circuits
-
-## 3.1.x -
- * Added unit testing for certain areas
- * Added setDateTime API/Socket
- * Bootstrap panel states are now persistent
-
-## 3.0.0 -
- * Upgraded pump logic
-
-## 2.0.0 -
- * https, Authentication
- * Completely refactored code.  Integrated BottleJS (https://github.com/young-steveo/bottlejs) for dependency injection and service locator functions
- * Integrations to loosely couple add-ons
-
-## 1.0.0 -
- * Much of the code reworked and refactored
- * Added Bootstrap UI by @arrmo
- * Better standalone pump control (@bluemantwo was super-helpful here, too!)
- * More accurate recognition of packets
- * Super fast speed improvements
- * Outgoing packets are now sent based on a timer (previously number of incoming packets)
+# Changelog
+## 7.6
+1. MasterTemp RS485 support for Nixie and IntelliCenter
+2. Nixie Valve Rotation delay
+3. Nixie Heater Cooldown delay
+4. Nixie Cleaner Start delay
+5. Nixie Cleaner Shutdown on Solar
+6. Nixie Delay Cancel
+
+## 7.5.1
+1. Backup/restore fixes
+2. Egg timer expiration
+3. Bug Fixes
+4. dashPanel/messageManager Filter
+5. RS485 refactor
+
+## 7.5
+1. Backup/restore
+2. Intellitouch add expansion modules
+## 7.4
+1. Filter object, emit, monitoring
+
+## 7.3.1
+1. Influx 2.0 support
+
+## 7.3
+1. Dynamic chlorinating % based on ORP demand for Nixie
+2. Docker creation updates
+
+## 7.2
+1. Refactor Intellichem and Chem Controllers
+
+## 7.1.1
+1. Added end time for circuits to show eggtimer/schedule off times
+2. Ultratemp updates
+3. Heater logic refactored
+4. Message response logic refactored
+5. Intellichem updates
+
+
+## 7.1.0
+1. Moved virtual chlorinator code and control to Nixie
+2. Moved virtual pump code and control to Nixie; Nixie supports SS, DS, SuperFlo, VS, VF, VSF
+3. MQTT changes
+4. Outbound processing for packets now has a scope.  Previously if an outbound packet would receive a response we would clear all of the similar packets off the queue.  EG if a user requests circuit 2 and 3 to be turned on, we would clear out the outbound message for 3.  Now the code is more selective about what "scope" is considered for a successful response.
+
+## 7.0.0
+1. Upgrades to setup/sync between njsPC and REM
+2. Significant steps to njsPC (Nixie) acting as a standalone pool controller (virtual controller heaters, move virtual controller code, etc.)
+3. Dependency updates (Typescript 4, Socket.io 4, etc)
+
+## 6.5.2
+1. Bug Fixes
+2. Schedule updates
+3. MQTT Binding updates
+4. LSI calcs for REM (in addition to CSI)
+
+## 6.5.1
+1. Init Touch bodies upon startup
+2. *Touch chlorinator fixes
+3. MQTT updates
+
+## 6.5.0
+1. Full compatibility with REM (Relay Equipment Manager) for hardware control (ph sensors, orp sensors, pumps, relays, flow sensors)
+1. Upgrades to Influx binding
+1. MQTT alternate bindings
+1. Many, many bug fixes
+
+## 6.1.0
+1. Chem controller
+1. MQTT native support
+1. Server based time for *Touch and other non-internet based OCP
+1. Version notifications
+1. IntelliCenter updates for dual bodies, 1.045/1.047 (partial) support
+1. Many bug fixes
+
+## 6.0.1
+1. Implement https (no basic auth yet)
+1. API documentation @ https://tagyoureit.github.io/nodejs-poolcontroller-api/
+1. Add timestamp to logs for API calls
+1. #200, #202
+
+## 6.0
+What's new in 6.0?s
+
+In short, everything!  6.0 is a complete re-write of the application.  Huge props to @rstrouse for his wisdom and guidance in refactoring the code.
+
+1. IntelliCenter - now supported
+1. Configuring and running the app - all new.  Start over with the Installation instructions.
+1. Automatic detection of your pool equipment.  Previous versions of the app would detect the configuration of your pool but you still had to tell the app if you had IntelliTouch/EasyTouch/IntelliCom.  This is now done automatically.
+1. Configuration and state information.  Config.json now only stores information related to the configuration of the app.  There are separate files in the /data directory that store (and persist) pool configuration and state information.
+1. API's - completely changed.  See separate API documentation (*link here)
+1. Outbound Sockets - Now more granular to make the web app more responsive
+1. Web app - Now a separate installion for a true client/server metaphore.
+1. Node v12+
+1. `Integrations` are now called `Bindings`.  Any integration built on 5.3 need to be upgraded to the binding format.  See Readme for a list of currently upgraded bindings.
+
+## 5.3.3
+#134
+
+## 5.3.1
+#132
+
+## 5.3.0
+Fix for #106
+Fix for "Error 60" messages
+Improved caching of files on browsers. Thanks @arrmo! Now files will be loaded once in the browser and kept in cache instead of reloaded each time.
+Improved handling of sessions and graceful closing of the HTTP(s) servers.
+
+## 5.2.0
+1. Node 6+ is supported.  This app no longer supports Node 4.
+1. Update of modules.  Make sure to run `npm i` or `npm upgrade` to get the latest.
+1. Much better support of multiple Intellibrite controllers.  We can read both controllers now.  There are still some issues with sending changes and help is needed to debug these.
+1. Chlorinator API calls (and UI) will now make changes through Intellitouch when available, or directly to the Intellichlor if it is standalone (aka using the virtual controller)
+1. Decoupled serial port and processing of packets.  Should help recovery upon packet errors.
+1. Implementation of #89.  Expansion boards are now (better) supported by setting variables in your config.json.  See the [config.json](#module_nodejs-poolController--config) section below.
+1. Fix for #95
+1. Fix for #99
+1. Fix for #100
+
+## 5.1.1 -
+1.  Renamed all 'valves' items to valve to be in line with singular renaming of items
+1.  InfluxDB - moved some items that were in tag fields to field keys; added valves
+1.  Added days of week (with editing) back to the schedules.  Not sure when they disappeared, but they are back now.  #92
+1.  Added MySQL integration to log all packets to a DB
+1.  Fixed PR #95 to allow sub-hour egg timers
+1.  Fixed Intellibrite bugs
+1.  Started to move some of the inter-communications to emitter events for better micro-services and shorter call stacks (easier debugging; loosely coupled code).
+1.  Changed some Influx tags/queries.
+
+## 5.1.0 -
+1. Intellibrite support - API's, Sockets and a WebUI.  Lights should have the 'Intellbrite' an their circuit function (set this up at the controller) to show up in this section.
+Will document more later, but...
+/light/mode/:mode
+/light/circuit/:circuit/setColor/:color
+/light/circuit/:circuit/setSwimDelay/:delay
+/light/circuit/:circuit/setPosition/:position
+
+See the constants.js file and the sections:
+  strIntellibriteModes (for modes)
+  lightColors (for setColor)
+
+## 5.0.1 -
+1. Fixed Influx error on startup #90
+1. Fixed bad characters in custom names
+
+## 5.0.0 -
+Make sure to run `npm upgrade`.  There are many package updates and changes.
+
+ * Added add/delete/edit schedule
+ * All sockets/API now singular (`circuits`->`circuit`)
+ * All sockets/API data now returned with a JSON qualifier. EG `{pump:...}`, `{circuit:...}`
+ * Intellichem decoding and display
+ * Changes to `/config` endpoint.  It's now included with the `/all` end point since there would be quite a bit of duplication.  It still exists standalone (for now) but has much less information in it.
+ * Moved `hideAux` setting from `configClient.json` (web UI settings) to `config.json` template.  In `config.json` template, moved
+    ```
+    {equipment: {controller: {circuitFriendlyNames:{1..20}}}}
+
+     // to
+
+    {equipment: {circuit: friendlyName:{1..20},
+                              hideAux: boolean
+                              },
+    }
+    ```
+    to be in line with the other equipment in the pool setup and accomodate the `hideAux` setting.
+
+ * Fixed issue #82
+ * Extra info from `/config` was being added to the circuit section in `config.json`
+ * This release includes a new mechanism for updating config.json files. See notes in [config.json](#module_nodejs-poolController--config) section.
+ * mDNS server.  Currently included for SmartThings integration, but in the future can be used for autodiscovery by other applications/devices.
+ * New `/config` endpoint (beta) to allow applications to get a high level summary of the system.
+ * Support for two separate (http/https) web servers, each/both with Auth, and also the option to redirect all http to https traffic.  Thanks to @arrmo for driving this with #65 and #68.
+ * A UI for standalone pumps
+ * All sockets and API's renamed to be SINGULAR.  Circuits -> circuit, Schedules->schedule, etc.
+ * All returned JSON data (API/socket) now has the type qualifier per [#57](https://github.com/tagyoureit/nodejs-poolController/issues/57)
+ * Make sure to run `npm upgrade`.  There are many package updates and changes.
+ * Intellichem initial support.
+ * Inactivity timer for both internal connections and web page connections.  If a connection is broken, it should re-establish itself automatically now.
+ * SSDP for auto-discovery by SmartThings or other services
+
+## 4.0.0 -
+ * Changed much in the config.json file
+ * Save pump programs and chlorinator level to config.json
+ * Added support for GPM with pumps
+ * Check for newer versions of the app on github, and dismiss notifications until next release
+ * Bootstrap configuration is automatically saved in clientConfig.json via UI actions
+ * Started to introduce some promises into the workflow (mostly with read/write operations)
+ * Added log-to-file option
+ * Added capture for Ctrl-C/SIGINT to have a clean exit
+ * Added InfluxDB database capabilities
+ * Added support for reading the data from up to 16 pumps.  (You can still only control two.)
+ * Support for up to 50 circuits, 8 pumps
+ * Delay and Cancel Delay for circuits
+
+## 3.1.x -
+ * Added unit testing for certain areas
+ * Added setDateTime API/Socket
+ * Bootstrap panel states are now persistent
+
+## 3.0.0 -
+ * Upgraded pump logic
+
+## 2.0.0 -
+ * https, Authentication
+ * Completely refactored code.  Integrated BottleJS (https://github.com/young-steveo/bottlejs) for dependency injection and service locator functions
+ * Integrations to loosely couple add-ons
+
+## 1.0.0 -
+ * Much of the code reworked and refactored
+ * Added Bootstrap UI by @arrmo
+ * Better standalone pump control (@bluemantwo was super-helpful here, too!)
+ * More accurate recognition of packets
+ * Super fast speed improvements
+ * Outgoing packets are now sent based on a timer (previously number of incoming packets)
  * Added ISY support (@bluemantwo was super-helpful here, too!)

package/Dockerfile

@@ -1,17 +1,17 @@
-FROM node:lts-alpine AS build
-RUN apk add --no-cache make gcc g++ python linux-headers udev tzdata
-WORKDIR /app
-COPY package*.json ./
-RUN npm ci
-COPY . .
-RUN npm run build
-RUN npm ci --production
-
-FROM node:lts-alpine as prod
-RUN apk add git
-RUN mkdir /app && chown node:node /app
-WORKDIR /app
-COPY --chown=node:node --from=build /app .
-USER node
-ENV NODE_ENV=production
-ENTRYPOINT ["node", "dist/app.js"]
+FROM node:lts-alpine3.12 AS build
+RUN apk add --no-cache make gcc g++ python3 linux-headers udev tzdata
+WORKDIR /app
+COPY package*.json ./
+RUN npm ci
+COPY . .
+RUN npm run build
+RUN npm ci --production
+
+FROM node:lts-alpine3.12 as prod
+RUN apk add git
+RUN mkdir /app && chown node:node /app
+WORKDIR /app
+COPY --chown=node:node --from=build /app .
+USER node
+ENV NODE_ENV=production
+ENTRYPOINT ["node", "dist/app.js"]

package/Gruntfile.js

@@ -1,41 +1,41 @@
-module.exports = function(grunt) {
-
-  grunt.initConfig({
-    usebanner: {
-      taskName: {
-        options: {
-          position: 'top',
-          banner:    `/*  nodejs-poolController.  An application to control pool equipment.
-Copyright (C) 2016, 2017.  Russell Goldin, tagyoureit.  russ.goldin@gmail.com
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU Affero General Public License as
-published by the Free Software Foundation, either version 3 of the
-License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU Affero General Public License for more details.
-
-You should have received a copy of the GNU Affero General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/`,
-          linebreak: true,
-          replace: false
-        },
-        files: {
-          src: [ 'config/*.ts', 'controller/**/*.ts', 'logger/*.ts', 'web/**/*.ts', 'app.ts' ]
-        }
-      }
-    }
-  })
-
-  grunt.loadNpmTasks('grunt-banner');
-
-}
-
-
-
-
+module.exports = function(grunt) {
+
+  grunt.initConfig({
+    usebanner: {
+      taskName: {
+        options: {
+          position: 'top',
+          banner:    `/*  nodejs-poolController.  An application to control pool equipment.
+Copyright (C) 2016, 2017.  Russell Goldin, tagyoureit.  russ.goldin@gmail.com
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU Affero General Public License as
+published by the Free Software Foundation, either version 3 of the
+License, or (at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Affero General Public License for more details.
+
+You should have received a copy of the GNU Affero General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/`,
+          linebreak: true,
+          replace: false
+        },
+        files: {
+          src: [ 'config/*.ts', 'controller/**/*.ts', 'logger/*.ts', 'web/**/*.ts', 'app.ts' ]
+        }
+      }
+    }
+  })
+
+  grunt.loadNpmTasks('grunt-banner');
+
+}
+
+
+
+