node-red-contrib-ta-cmi-coe 1.0.0

package/CHANGELOG.md

@@ -0,0 +1,23 @@
+## Changelog
+
+### Version 1.0.0 (Erst-Release)
+- Added Support for CoE Version 2.0
+- Timeout für Input Nodes
+- Konfiguration Adresse UDP-Listener
+- Ergänzungen Dokumentation
+- Einstellung des Block Output Nodes
+- Zweisprachige Einheiten
+- Bug-Fixes
+
+### Version 0.9.1
+- Vorbereitungen für zweisprachige Version
+- Fehlerbehebung Output-Nodes
+- Ergänzungen Dokumentation
+
+### Version 0.9.0
+- Initiale Veröffentlichung
+- CoE Input, Output und Block Output Nodes
+- Automatische Unit-Konvertierung
+- Unterstützung für alle TA Messgrößen
+- Shared UDP Socket
+- Umfassende Dokumentation

package/LICENSE

@@ -0,0 +1,201 @@
+Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "[]"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright 2025 Florian Mayrhofer
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.

package/README.md

@@ -0,0 +1,277 @@
+**Status**: Erst-Release 27.11.2025
+
+# node-red-contrib-ta-cmi-coe
+
+Node-RED Bibliothek zum Lesen und Schreiben von Werten an Technische Alternative CMI über CAN over Ethernet (CoE).
+
+## Funktionsumfang
+
+- Unterstützung für CoE-Version 1 + 2
+- **CoE Input Node**: Empfang von analogen und digitalen Einzelwerten von der CMI
+- **CoE Output Node**: Senden einzelner Werte an das CMI/Regler
+- **CoE Monitor**: Empfängt und überwacht Pakete von allen Quellen
+- Automatische Konvertierung analoger Werte basierend auf Unit ID
+- Unterstützung für von TA definierte Messgrößen
+- Konfiguration von CMI und CoE-Version
+
+## Installation
+
+### Über Node-RED Palette Manager (empfohlen)
+
+1. Öffne Node-RED
+2. Menü → Manage palette → Install
+3. Suche nach `node-red-contrib-ta-cmi-coe`
+4. Installiere das Paket
+
+### Manuelle Installation
+
+```bash
+cd ~/.node-red
+npm install node-red-contrib-ta-cmi-coe
+```
+
+### Lokale Entwicklungsumgebung
+
+```bash
+cd ~/.node-red
+git clone https://github.com/mayflo/node-red-contrib-ta-cmi-coe.git
+cd node-red-contrib-ta-cmi-coe
+npm link
+cd ~/.node-red
+npm link node-red-contrib-ta-cmi-coe
+```
+
+Starte Node-RED neu.
+
+## Voraussetzungen
+
+- Node-RED v1.0.0 oder höher
+- CMI von Technische Alternative mit Firmware 1.39.1 oder höher
+- Die verwendete CoE-Version wird auf dem CMI konfiguriert (Einstellungen > CAN > CoE).
+- Für Empfang: CoE-Ausgänge müssen auf der CMI konfiguriert werden (Einstellungen > Ausgänge > CoE).
+- Für Senden: CAN-Eingänge müssen auf dem Regler konfiguriert werden.
+- Für den Empfang von Nachrichten benötigt die verwendeten CMIs eine fest eingestellte IP-Addresse
+- Die Kommunikation erfolgt über UDP-Ports, welche auf dem Node-RED-Host geöffnet werden müssen (CoE V1 Port 5441 / CoE V2 Port 5442)
+
+## Unterstützte Geräte
+
+Die Bibliothek wurde für UVR610 entwickelt und getestet, funktioniert aber grundsätzlich mit allen Geräten, die über den CAN-Bus der CMI verbunden sind:
+
+- UVR16x2
+- UVR1611
+- UVR61-3
+- X2 Regler
+- Andere CAN-Bus Geräte von Technische Alternative
+
+## Schnellstart
+
+### 1. CMI Configuration Node erstellen
+
+Erstelle zunächst eine CMI Configuration:
+- Öffne einen beliebigen Node zur Bearbeitung
+- Bei "CMI Config" auf Plus klicken → "Add new CMI config..."
+- **Lokale IP**: IP-Adressbereich des UDP-Ports (0.0.0.0 = alle Interfaces, 127.0.0.1 = lokales Netzwerk)
+- **CMI Adresse**: (Feste) IP-Adresse des CMI
+- **CoE Version**: CoE V1/V2
+
+### 2. CMI konfigurieren
+
+#### Für Empfang (CoE Input):
+Auf der CMI unter **Einstellungen → Ausgänge → CoE**:
+- **Eingang**: CAN-Bus Eingang (z.B. CAN1)
+- **IP**: IP-Adresse von Node-RED
+- **Knoten**: Wert aus "Node Number" des Input Nodes
+- **Netzwerkausgang**: Nummer des Ausgangs (1-32)
+- **Sendebedingung**: Nach Bedarf
+
+#### Für Senden (CoE Output):
+Auf dem Regler: CAN-Eingang konfigurieren
+- **Knoten**: Wert aus "Node Number" des Output Nodes
+- **Ausgangsnummer**: Nummer des Ausgangs (1-32)
+- **Messgröße**: "Automatisch" für Unit von Node-RED
+
+### 3. Beispiel Flow
+
+```json
+[
+    {
+        "id": "mycmi",
+        "type": "cmiconfig",
+        "name": "Mein CMI",
+        "localip": "0.0.0.0",
+        "address": "192.168.0.100",
+        "coeVersion": 1
+    },
+    {
+        "id": "input_example",
+        "type": "coe-input",
+        "name": "Temperatur Sensor",
+        "cmiconfig": "mycmi",
+        "nodeNumber": 10,
+        "outputNumber": 1,
+        "dataType": "analog",
+        "timeout": 20,
+        "x": 150,
+        "y": 100,
+        "wires": [["debug123"]]
+    },
+    {
+        "id": "debug123",
+        "type": "debug",
+        "name": "Message",
+        "x": 350,
+        "y": 100
+    },
+    {
+        "id": "inject1",
+        "type": "inject",
+        "name": "Setze Sollwert",
+        "payload": "22.5",
+        "payloadType": "num",
+        "repeat": "",
+        "x": 150,
+        "y": 200,
+        "wires": [["output_example"]]
+    },
+    {
+        "id": "output_example",
+        "type": "coe-output",
+        "name": "Sollwert Heizung",
+        "cmiconfig": "mycmi",
+        "nodeNumber": 11,
+        "outputNumber": 5,
+        "dataType": "analog",
+        "unit": 1,
+        "x": 350,
+        "y": 200
+    }
+]
+```
+
+## Node Typen
+
+### CoE Input Node
+
+Empfängt Werte von der CMI.
+
+**Output Message:**
+```javascript
+{
+    payload: 22.5,                    // Der Wert
+    topic: "coe/10/analog/1",         // Format: coe/{node}/{type}/{output}
+    coe: {
+        nodeNumber: 10,               // CAN Knoten-Nummer
+        blockNumber: 1,               // CoE Block-Nummer
+        outputNumber: 1,              // Netzwerkausgang
+        dataType: "analog",           // Typ
+        unit: 1,                      // Unit ID (z.B. 1 = °C)
+        unitName: "Temperatur °C",    // Unit Name
+        unitSymbol: "°C°",            // Unit Symbol
+        sourceIP: "192.168.1.100",    // IP der CMI
+        raw: { ... }                  // Rohdaten
+    }
+}
+```
+
+### CoE Output Node
+
+Sendet einzelne Werte an die CMI.
+
+**Input Message:**
+```javascript
+// Einfach:
+msg.payload = 22.5;
+
+// Mit eigener Unit:
+msg.payload = 22.5;
+msg.coe = { unit: 1 };  // Überschreibt Config
+```
+
+## Troubleshooting
+
+### Keine Daten empfangen?
+
+1. **CMI CoE-Ausgänge prüfen**: IP und Port korrekt?
+2. **Lokale IP**: Max. Empfangsbereich mit Lokale IP = 0.0.0.0 (alle) überprüfen (insbesondere für Docker-Umgebungen)
+3. **Firewall**: Port 5441/UDP (CoE V1) bzw. 5442/UDP (CoE V2) offen?
+4. **Node Number**: Stimmt mit CMI-Konfiguration überein?
+5. **Debug aktivieren**: "Receive All" aktivieren und Debug-Output prüfen
+
+### Senden funktioniert nicht?
+
+1. **CMI erreichbar?** Ping zur CMI IP
+2. **CAN-Eingang auf Regler**: Knoten-Nr und Ausgangsnr korrekt?
+3. **Timeout auf Regler?** "Sende Ausgänge alle" Intervall nutzen
+
+### Mehrere CMIs?
+
+- Verwende unterschiedliche Node Numbers
+- ODER verwende unterschiedliche Blocks
+- Sonst überschreiben sich die Werte gegenseitig!
+
+### Werte falsch?
+
+- **Zu große Werte**: CAN-Bus V1 ist limitiert auf ±32767 (dimensionslos)
+- **Falsche Unit**: Manche Units (Arbeitszahl, Euro) haben Einschränkungen
+- **Nachkommastellen**: Prüfe ob korrekte Unit ID verwendet wird
+
+## Bekannte Einschränkungen
+
+1. **Max. Wertbereich**: CAN-Bus Version 1 ist limitiert auf ±32767 (V2 für größeren Wertebereich)
+2. **Keine Quittierung**: CoE hat keine Bestätigung (fire-and-forget)
+3. **CMI als Gateway**: Werte werden vom CMI übertragen, können aber nicht direkt an CMI gesendet werden (nur an Regler)
+
+## Erweiterte Nutzung
+
+### Periodisches Senden (verhindert Timeout)
+
+```javascript
+// In Function Node:
+const intervalMinutes = 5;
+
+// Timer starten
+if (!context.timer) {
+    context.timer = setInterval(() => {
+        node.send({ payload: msg.payload });
+    }, intervalMinutes * 60 * 1000);
+}
+
+return msg;
+```
+
+### Custom Unit Conversion
+
+```javascript
+// In Function Node vor Output:
+const rawValue = msg.payload * 100;  // 2 Nachkommastellen
+msg.payload = rawValue;
+msg.coe = { unit: 0 };  // Dimensionslos
+return msg;
+```
+
+## Lizenz
+
+Veröffentlicht unter der [Apache 2.0 Lizenz](LICENSE)
+
+- ✅ Private und gewerbliche Nutzung
+- ⚠️ Keine Haftung für Schäden durch Nutzung
+
+## Credits
+
+Basiert auf dem Protokoll-Verständnis und der Dokumentation von:
+- [SymconJoTTACoE](https://github.com/jotata/SymconJoTTACoE/) von jotata
+- [Ta-CoE](https://gitlab.com/DeerMaximum/ta-coe) von DeerMaximum
+
+## Support
+
+- **Issues**: GitHub Issue Tracker
+- **Fragen**: GitHub Discussions
+- **Dokumentation**: Siehe README und Node-RED Info-Panel
+
+## Autor
+
+mayflo
+
+---
+
+**Hinweis**: Diese Bibliothek wurde in der Freizeit entwickelt. Support erfolgt nach Verfügbarkeit. Besten Dank für dein Verständnis! 😊

package/__tests__/blockinfo.test.js

@@ -0,0 +1,24 @@
+const { getBlockInfo } = require("../lib/utils");
+
+describe("Block Info Tests", () => {
+  test("Analog Output 1 → Block 1, Position 0", () => {
+    expect(getBlockInfo("analog", 1)).toEqual({ block: 1, position: 0 });
+  });
+
+  test("Analog Output 5 → Block 2, Position 0", () => {
+    expect(getBlockInfo("analog", 5)).toEqual({ block: 2, position: 0 });
+  });
+
+  test("Digital Output 10 → Block 0, Position 9", () => {
+    expect(getBlockInfo("digital", 10)).toEqual({ block: 0, position: 9 });
+  });
+
+  test("Digital Output 20 → Block 9, Position 3", () => {
+    expect(getBlockInfo("digital", 20)).toEqual({ block: 9, position: 3 });
+  });
+
+  test("Ungültiger Output → Default", () => {
+    expect(getBlockInfo("analog", 0)).toEqual({ block: 1, position: 0 });
+  });
+});
+

package/__tests__/conversion.test.js

@@ -0,0 +1,22 @@
+const { convertCoEToValue, convertValueToCoE, getUnitInfo } = require("../lib/utils");
+
+describe("CoE Conversion Utilities", () => {
+  test("°C mit Unit=1, decimals=1", () => {
+    const unitInfo = { decimals: 1 };
+    expect(convertCoEToValue(225, 1, 1)).toBe(22.5);
+    expect(convertValueToCoE(22.5, 1, 1)).toBe(225);
+  });
+
+  test("kW mit Unit=10, Protocol V2 override", () => {
+    // V2 überschreibt decimals=2
+    expect(convertCoEToValue(2500, 10, 2)).toBe(25.0);
+    expect(convertValueToCoE(25.0, 10, 2)).toBe(2500);
+  });
+
+  test("Unknown Unit", () => {
+    const info = getUnitInfo(999, "de");
+    expect(info.name).toMatch(/Unknown/);
+    expect(convertCoEToValue(1234, 999, 1)).toBe(1234); // decimals=0
+  });
+});
+

package/__tests__/udp.test.js

@@ -0,0 +1,46 @@
+const dgram = require("dgram");
+
+describe("UDP Integration mit Mock", () => {
+  let server;
+  let received;
+
+  beforeAll(() => {
+    return new Promise((resolve) => {
+      server = dgram.createSocket("udp4");
+      server.on("listening", resolve);
+      server.on("message", (msg) => {
+        received = msg.toString();
+      });
+      server.bind(5555); // besser eigenen Test-Port nehmen
+    });
+  });
+
+  afterAll(() => {
+    server.close();
+  });
+
+  test("Sendet Testpaket", () => {
+    return new Promise((resolve, reject) => {
+      const client = dgram.createSocket("udp4");
+      const payload = Buffer.from("Hallo UDP-Mock!");
+
+      client.send(payload, 5555, "127.0.0.1", (err) => {
+        if (err) {
+          client.close();
+          return reject(err);
+        }
+        client.close();
+      });
+
+      setTimeout(() => {
+        try {
+          expect(received).toBe("Hallo UDP-Mock!");
+          resolve();
+        } catch (e) {
+          reject(e);
+        }
+      }, 200);
+    });
+  });
+});
+

package/coe/coe-input.html

@@ -0,0 +1,61 @@
+<!-- 
+    CoE Input Node HTML-File
+
+    Copyright 2025 Florian Mayrhofer
+    Licensed under the Apache License, Version 2.0
+-->
+
+<script type="text/javascript">
+    RED.nodes.registerType('coe-input', {
+        category: 'TA CMI',
+        color: '#C0DEED',
+        defaults: {
+            name: { value: "" },
+            cmiconfig: { value: "", type: "cmiconfig", required: true },
+            nodeNumber: { value: 1, validate: RED.validators.number() },
+            outputNumber: { value: 1, validate: RED.validators.number() },
+            dataType: { value: "analog" },
+            timeout: { value: 20 }
+        },
+        inputs: 0,
+        outputs: 1,
+        icon: "arrow-in.svg",
+        label: function() {
+            const type = this.dataType === 'analog' ? 'A' : 'D';
+            return this.name || `CoE In (${type}${this.outputNumber})`;
+        },
+        labelStyle: function() {
+            return this.name ? "node_label_italic" : "";
+        }
+    });
+</script>
+
+<script type="text/html" data-template-name="coe-input">
+    <div class="form-row">
+        <label for="node-input-name"><i class="fa fa-tag"></i> <span data-i18n="coe-input.label.name"></span></label>
+        <input type="text" id="node-input-name">
+    </div>
+    <div class="form-row">
+        <label for="node-input-cmiconfig"><i class="fa fa-cog"></i> <span data-i18n="coe-input.label.cmiconfig"></span></label>
+        <input type="text" id="node-input-cmiconfig">
+    </div>
+    <div class="form-row">
+        <label for="node-input-nodeNumber"><i class="fa fa-sitemap"></i> <span data-i18n="coe-input.label.nodeNumber"></span></label>
+        <input type="number" id="node-input-nodeNumber" placeholder="1" min="0" max="62">
+    </div>
+    <div class="form-row">
+        <label for="node-input-outputNumber"><i class="fa fa-arrow-down"></i> <span data-i18n="coe-input.label.outputNumber"></span></label>
+        <input type="number" id="node-input-outputNumber" placeholder="1" min="1" max="32">
+    </div>
+    <div class="form-row">
+        <label for="node-input-dataType"><i class="fa fa-list"></i> <span data-i18n="coe-input.label.dataType"></span></label>
+        <select id="node-input-dataType">
+            <option value="analog">Analog</span></option>
+            <option value="digital">Digital</span></option>
+        </select>
+    </div>
+    <div class="form-row">
+        <label for="node-input-timeout"><i class="fa fa-clock-o"></i> <span data-i18n="coe-input.label.timeout"></span></label>
+        <input type="number" id="node-input-timeout" placeholder="Timeout (Min.)" value="20">
+    </div>
+</script>