node-red-contrib-knx-ultimate 7.1.3 → 8.0.1-beta.0

package/CHANGELOG.md

@@ -6,13 +6,26 @@
 
 # CHANGELOG
 
-**Version 7.1.3** - September 2026
+**Version 8.0.1-beta.0** - September 2026
 
--Quick fix: Matter Controller and Matter Bridge are available in the palette again.
+- Published under the `beta` dist-tag as the exact install target for the version 7 one-click upgrade.
+- Made the version 7 migration warning and optional integration packages much more visible in the README.
+- Keeps the version 7 one-click upgrade resource loadable while version 8 is waiting for the mandatory Node-RED restart.
+- Added an editor recovery bridge and inert runtime placeholders for direct upgrades from older version 7 installations; compatible unknown nodes can be backed up, converted and deployed without reinstalling KNX Ultimate 8.
+- Requires Matter Ultimate 1.0.3 when Matter nodes are migrated so protected door-lock PIN credentials remain registered across the Deploy.
+- Treats `preinstall` as a read-only, best-effort diagnostic because modern Node-RED/npm installations may skip dependency lifecycle scripts; the editor bridge is the authoritative recovery path.
+
+**Version 8.0.0** - September 2026
+
+- The editor stays accessible after upgrading from version 7 and reminds you to restart Node-RED.
+- KNX Ultimate 8 ships only the current KNX nodes.
+- Installation checks saved flows and blocks the upgrade if old HUE or Matter nodes still need migration.
+- HUE and Matter use their separate packages; old KNX utility nodes are replaced by KNX Utility.
+- Removed the old AI nodes and unused dependencies. Migrate existing flows before upgrading: see [upgrade steps](https://github.com/Supergiovane/node-red-contrib-knx-ultimate/blob/main/MIGRATION.md).
 
 **Version 7.1.2** - September 2026
 
-- HUE Controller, Matter Controller and Matter Bridge are available in the palette again.
+- HUE Controller is available in the palette again.
 
 **Version 7.1.1** - September 2026
 

package/MIGRATION.md

@@ -0,0 +1,40 @@
+# Upgrading to KNX Ultimate 8
+
+Version 8 contains the current KNX nodes and gateway. HUE and Matter are provided by `node-red-contrib-hue-ultimate` and `node-red-contrib-matter-ultimate`; the old dedicated KNX utility nodes are replaced by KNX Utility.
+
+## Recommended path from version 7
+
+Install KNX Ultimate 7.1.4 first, open any KNX Ultimate node and press **Upgrade to v8**. The guided operation backs up the flows, installs the required HUE/Matter packages, converts compatible nodes, performs and verifies a full Deploy, and installs version 8. Restart the Node-RED service when requested.
+
+This is the preferred route because the legacy nodes remain operational until the converted flow has been safely deployed.
+
+## Direct upgrade from an older version 7
+
+Every version 8 also includes a recovery bridge for users who reach it without passing through 7.1.4:
+
+1. Install version 8 and restart the Node-RED service.
+2. Open the Node-RED editor. A migration prompt appears when legacy nodes or configuration nodes are found, including nodes displayed as unknown.
+3. Start the guided migration. It downloads a JSON backup, installs HUE Ultimate and/or Matter Ultimate when needed, converts supported nodes in place, performs a full Deploy and reads the saved flows back for verification.
+4. Reload the editor when prompted so converted configuration nodes are re-indexed from the saved flow before any further editing.
+
+IDs, wires, groups and configuration references are preserved. Existing Node-RED credentials remain associated with the same configuration-node IDs, and Matter storage under `knxultimatestorage` is not deleted.
+
+Version 8 registers hidden, inert compatibility runtimes for removed types so that their presence does not stop every unrelated flow from starting. Those legacy nodes do not perform their old automation while they are awaiting conversion. Complete the migration immediately after the restart and do not manually Deploy unknown nodes first.
+
+## Legacy KNX AI nodes
+
+`knxUltimateAI` and `knxUltimateAIHomeAssistant` cannot be converted automatically to Cerebrum Ultimate. The guided process stops before changing flows when it finds either type. Replace or remove those nodes manually, then start the migration again. Their credential schema remains registered during the transition so saved secrets are not discarded merely because version 8 was installed.
+
+## Safety behaviour
+
+The migration stops before changing anything if it finds a locked flow, an unrelated unknown/invalid node, insufficient editor permissions or disabled Palette Manager installation. A flow backup is requested before conversion. Package installation happens through the authenticated Node-RED Admin API, not through a nested npm process.
+
+If HUE Ultimate or Matter Ultimate is installed or updated in a way that requires a restart, the bridge asks for that restart before changing flows. After conversion it validates the editor graph, performs a revision-aware full Deploy and verifies the persisted result. Package timeouts and ambiguous Deploy responses are treated as uncertain rather than guessed.
+
+Node-RED can use custom storage and can contain undeployed browser changes, so an npm lifecycle script cannot safely perform this conversion. The version 8 `preinstall` hook is diagnostic only: when npm allows lifecycle scripts it scans common saved-flow locations and prints a migration warning, but it never edits a flow or starts a nested package installation. Some npm/Node-RED policies disable dependency lifecycle scripts entirely, so the editor bridge is the authoritative migration path.
+
+## Using the separate packages
+
+HUE Ultimate and Matter Ultimate provide their own configuration nodes and device connections. Select the existing `knxUltimate-config` gateway in their editors to enable KNX integration. They can also work without KNX Ultimate.
+
+Keep the same Node-RED user directory and do not delete `knxultimatestorage`. The separate Matter package uses the existing pairing identity, fabrics and device storage.

package/README.md

@@ -6,9 +6,31 @@
 
 ## The most popular KNX node for Node-RED
 
-KNX Ultimate is the most advanced KNX integration for Node-RED, providing secure KNX/IP communication, routing, ETS project import, ETS diagnostics, virtual devices, and powerful automation nodes. Build professional, reliable, and scalable smart home and building automation projects with minimal effort. ù
-You can optionally increase the power of KNX, by installing node-red-contrig-hue-ultimate for Philips Hue and installing node-red-contrig-matter-ultimate form Matter Controller and Matter Bridge (control matter device via KNX and expose KNX GA via Matter).
-These optional nodes will detect KNX-Ultimate and seamlessy integrate with KNX, without further configurations.
+KNX Ultimate provides KNX/IP and KNX Secure communication, ETS project import, routing, diagnostics, virtual devices and automation utilities.
+
+The palette contains KNX Device, KNX Utility, KNX Viewer, KNX IoT Bridge, KNX Multi Routing and KNX Router Filter.
+
+---
+
+## 🚨 IMPORTANT — UPGRADING FROM VERSION 7.1.4 🚨
+
+> ### Preferred: migrate before installing version 8
+>
+> Install version 7.1.4 first, then use **Upgrade to v8** from any KNX Ultimate node.
+>
+> ### The migration is fully automated with the push of a button
+>
+> If version 8 was installed directly from an older v7, restart Node-RED and open the editor: the built-in recovery bridge offers the same protected backup, package installation, conversion and Deploy. Legacy KNX AI nodes still require manual replacement or removal.
+>
+> **Follow the [upgrade steps](https://supergiovane.github.io/node-red-contrib-knx-ultimate/wiki/Migration-8) to keep your flows working.**
+
+### Native seamless integrations
+
+- **Philips Hue:** install `node-red-contrib-hue-ultimate`.
+- **Matter Controller and Matter Bridge:** install `node-red-contrib-matter-ultimate`. Select your existing KNX gateway in those nodes to enable KNX integration. The package can also work without KNX Ultimate.
+- **AI-driven KNX control, on-field diagnostics and unit testing for KNX installers:** install `node-red-contrib-cerebrum-ultimate`.
+
+---
 
 <br/>
 <br/>
@@ -40,7 +62,7 @@ These optional nodes will detect KNX-Ultimate and seamlessy integrate with KNX,
 </p>
 
 <p align="left" style="font-size:2.25rem;font-weight:700;line-height:1.9;">
-<a href="https://github.com/Supergiovane/node-red-contrib-knx-ultimate/blob/master/CHANGELOG.md"
+<a href="https://github.com/Supergiovane/node-red-contrib-knx-ultimate/blob/main/CHANGELOG.md"
       style="display:inline-flex;align-items:center;gap:10px;padding:12px 24px;border-radius:999px;background:#ffc439;color:#111;font-weight:700;text-decoration:none;box-shadow:0 16px 30px rgba(255,196,57,0.32);">
       CHANGELOG
     </a>
@@ -49,7 +71,7 @@ These optional nodes will detect KNX-Ultimate and seamlessy integrate with KNX,
 </br>
 
 [license-image]: https://img.shields.io/github/license/Supergiovane/node-red-contrib-knx-ultimate?color=blue
-[license-url]: https://github.com/Supergiovane/node-red-contrib-knx-ultimate/blob/master/LICENSE
+[license-url]: https://github.com/Supergiovane/node-red-contrib-knx-ultimate/blob/main/LICENSE
 [npm-url]: https://npmjs.org/package/node-red-contrib-knx-ultimate
 [npm-version-image]: https://img.shields.io/npm/v/node-red-contrib-knx-ultimate.svg
 [node-version-image]: https://img.shields.io/node/v/node-red-contrib-knx-ultimate?logo=node.js&logoColor=white
@@ -72,3 +94,9 @@ These optional nodes will detect KNX-Ultimate and seamlessy integrate with KNX,
 [paypal-image]: https://img.shields.io/badge/Support-PayPal-blue
 [paypal-url]: https://www.paypal.com/donate/?hosted_button_id=S8SKPUBSPK758
 [docs-button-image]: https://img.shields.io/badge/Docs-Open%20Documentation-0d4c70?style=for-the-badge&logo=book&logoColor=f4fbff
+
+---
+
+<p align="center">
+  <img src="docs/assets/brand/made-in-italy.svg" alt="Made in Italy — Designed and developed in Italy" width="260">
+</p>

package/docs/README.md

@@ -0,0 +1,34 @@
+# Documentation for KNX Ultimate 8
+
+The site uses GitHub Pages/Jekyll and keeps the existing URLs and six languages: English, Italian, German, French, Spanish and Simplified Chinese.
+
+- `docs/_data/knx8.json`: translated home-page content and version notices.
+- `docs/_includes/homepage/content.html`: shared home-page structure.
+- `docs/wiki/`: node reference, getting started, migration and examples. Use the same `translation_key` for translations and preserve existing `permalink` values.
+- `scripts/wiki-menu.json`: navigation source. `npm run docs:prepare` regenerates `docs/_data/wiki-nav.json` and copies the package examples to `docs/examples/`.
+- `examples/`: the maintained importable flows. The copies in `docs/examples/` are generated and ignored by Git.
+
+The old HUE and Matter pages are version 7 references, marked by `legacy_package` and a visible notice linking to the new packages. Utility reference pages describe functions of **KNX Utility**, not separate palette nodes. Historical pages with duplicated language prefixes redirect to the real translated page.
+
+## Local preview
+
+Install the Ruby/Jekyll dependencies from `docs/Gemfile`, then run from the repository root with `jekyll` available on PATH:
+
+```sh
+npm run docs:build
+npm run docs:serve
+```
+
+Open `http://127.0.0.1:4000/node-red-contrib-knx-ultimate/`. The preview uses the same Liquid templates as the real site.
+
+`npm run wiki:refresh` imports help for the current Device, Gateway, Viewer, IoT Bridge and routing nodes. It preserves page metadata and archive notices. Getting started, migration, Utility overview/function references and examples are maintained directly in `docs/wiki/`.
+
+The `Documentation` GitHub Actions workflow prepares the downloads and builds the site. A push to `8.0.0` only builds an artifact; it does not replace the published version 7 documentation. Publishing runs after a push to `main`, or when the workflow is explicitly started manually. GitHub Pages uses **Settings → Pages → Source → GitHub Actions**.
+
+Language pages use explicit permalinks and translation keys, so no extra translation plugin is needed on GitHub Pages. For any other Pages build, run `npm run docs:prepare` before Jekyll so downloadable examples are included.
+
+## Repository branches
+
+- `main` is the default branch for KNX Ultimate 8 and its documentation.
+- `7.x` preserves the 7.1.4 code, including the Matter palette fix and one-click version 8 upgrade, for version 7 maintenance. Apply version 7 fixes there and do not merge the KNX 8 node removals into it.
+- The old `master` reference remains available for existing links. New development belongs on `main`; version 7 fixes belong on `7.x`.

package/docs/assets/brand/made-in-italy.svg

@@ -0,0 +1,12 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 400 112" width="400" height="112" role="img" aria-labelledby="title desc">
+ <title id="title">Made in Italy</title>
+ <desc id="desc">Designed and developed in Italy. Original project badge with the Italian tricolour.</desc>
+ <!-- Original artwork for this project; not a ministerial emblem or certification mark. -->
+ <defs><clipPath id="flag"><rect x="28" y="29" width="54" height="54" rx="27"/></clipPath></defs>
+ <rect x="1" y="1" width="398" height="110" rx="18" fill="#FCFCFA" stroke="#DFE5DF" stroke-width="2"/>
+ <g clip-path="url(#flag)"><path d="M28 29h18v54H28Z" fill="#008C45"/><path d="M46 29h18v54H46Z" fill="#F4F5F0"/><path d="M64 29h18v54H64Z" fill="#CD212A"/></g>
+ <g font-family="Arial, Helvetica, sans-serif" fill="#142B29">
+  <text x="103" y="52" font-size="24" font-weight="700" letter-spacing="1.5">MADE IN ITALY</text>
+  <text x="104" y="75" font-size="10" font-weight="700" letter-spacing="1.7">DESIGNED &amp; DEVELOPED</text>
+ </g>
+ </svg>

package/examples/Alerter - Device Alert Aggregation.json

@@ -31,7 +31,7 @@
   },
   {
     "id": "al_node",
-    "type": "knxUltimateAlerter",
+    "type": "knxUltimateUtility",
     "z": "al_tab",
     "server": "al_cfg",
     "name": "KNX Alerter",
@@ -64,7 +64,10 @@
       [
         "al_dbg3"
       ]
-    ]
+    ],
+    "utilityType": "alerter",
+    "inputs": 1,
+    "outputs": 3
   },
   {
     "id": "al_on",

package/examples/Auto Responder - Read Request Defaults.json

@@ -31,13 +31,16 @@
   },
   {
     "id": "ar_node",
-    "type": "knxUltimateAutoResponder",
+    "type": "knxUltimateUtility",
     "z": "ar_tab",
     "server": "ar_cfg",
     "name": "Auto responder",
     "commandText": "[{\"ga\":\"2/7/1\",\"default\":true},{\"ga\":\"2/7/2\",\"dpt\":\"5.001\",\"default\":25},{\"ga\":\"2/7/3\",\"dpt\":\"16.001\",\"default\":\"Ready\"}]",
     "x": 420,
     "y": 170,
-    "wires": []
+    "wires": [],
+    "utilityType": "autoresponder",
+    "inputs": 0,
+    "outputs": 0
   }
 ]

package/examples/Garage - Door Controller.json

@@ -31,7 +31,7 @@
   },
   {
     "id": "ga_node",
-    "type": "knxUltimateGarage",
+    "type": "knxUltimateUtility",
     "z": "ga_tab",
     "server": "ga_cfg",
     "name": "Garage Door",
@@ -66,7 +66,10 @@
       [
         "ga_dbg"
       ]
-    ]
+    ],
+    "utilityType": "garage",
+    "inputs": 1,
+    "outputs": 1
   },
   {
     "id": "ga_inj_on",

package/examples/Global Context - Expose KNX Values.json

@@ -31,7 +31,7 @@
   },
   {
     "id": "gc_node",
-    "type": "knxUltimateGlobalContext",
+    "type": "knxUltimateUtility",
     "z": "gc_tab",
     "server": "gc_cfg",
     "name": "KNXGlobalContext",
@@ -40,6 +40,9 @@
     "contextStorage": "",
     "x": 350,
     "y": 140,
-    "wires": []
+    "wires": [],
+    "utilityType": "globalcontext",
+    "inputs": 0,
+    "outputs": 0
   }
 ]

package/examples/KNX DateTime - Set Date and Time to Bus.json

@@ -1,89 +1,111 @@
-[{
-  "id": "dt_cfg_1",
-  "type": "knxUltimate-config",
-  "z": "",
-  "host": "224.0.23.12",
-  "port": "3671",
-  "physAddr": "15.15.202",
-  "suppressACKRequest": false,
-  "csv": "",
-  "KNXEthInterface": "Auto",
-  "KNXEthInterfaceManuallyInput": "",
-  "autoReconnect": "yes"
-},
-{
-  "id": "dt_inj_now",
-  "type": "inject",
-  "z": "flow_dt",
-  "name": "Send NOW",
-  "props": [
-    { "p": "payload" }
-  ],
-  "repeat": "",
-  "crontab": "",
-  "once": false,
-  "onceDelay": 0.1,
-  "topic": "",
-  "payloadType": "date",
-  "x": 150,
-  "y": 160,
-  "wires": [["dt_node"]]
-},
-{
-  "id": "dt_inj_custom",
-  "type": "inject",
-  "z": "flow_dt",
-  "name": "Send fixed ISO date",
-  "props": [
-    { "p": "payload", "v": "2026-03-02T10:00:00+01:00", "vt": "str" }
-  ],
-  "repeat": "",
-  "crontab": "",
-  "once": false,
-  "onceDelay": 0.1,
-  "topic": "",
-  "x": 170,
-  "y": 220,
-  "wires": [["dt_node"]]
-},
-{
-  "id": "dt_node",
-  "type": "knxUltimateDateTime",
-  "z": "flow_dt",
-  "server": "dt_cfg_1",
-  "name": "KNX Clock",
-  "outputtopic": "events/knx/datetime",
-  "gaDateTime": "1/7/1",
-  "nameDateTime": "Bus DateTime",
-  "dptDateTime": "19.001",
-  "gaDate": "",
-  "nameDate": "",
-  "dptDate": "11.001",
-  "gaTime": "",
-  "nameTime": "",
-  "dptTime": "10.001",
-  "sendOnDeploy": true,
-  "sendOnDeployDelay": 2,
-  "periodicSend": false,
-  "periodicSendInterval": 60,
-  "periodicSendUnit": "m",
-  "x": 420,
-  "y": 190,
-  "wires": [["dt_dbg"]]
-},
-{
-  "id": "dt_dbg",
-  "type": "debug",
-  "z": "flow_dt",
-  "name": "DateTime out",
-  "active": true,
-  "tosidebar": true,
-  "console": false,
-  "tostatus": true,
-  "complete": "true",
-  "targetType": "full",
-  "x": 640,
-  "y": 190,
-  "wires": []
-}]
-
+[
+  {
+    "id": "dt_cfg_1",
+    "type": "knxUltimate-config",
+    "z": "",
+    "host": "224.0.23.12",
+    "port": "3671",
+    "physAddr": "15.15.202",
+    "suppressACKRequest": false,
+    "csv": "",
+    "KNXEthInterface": "Auto",
+    "KNXEthInterfaceManuallyInput": "",
+    "autoReconnect": "yes"
+  },
+  {
+    "id": "dt_inj_now",
+    "type": "inject",
+    "z": "flow_dt",
+    "name": "Send NOW",
+    "props": [
+      {
+        "p": "payload"
+      }
+    ],
+    "repeat": "",
+    "crontab": "",
+    "once": false,
+    "onceDelay": 0.1,
+    "topic": "",
+    "payloadType": "date",
+    "x": 150,
+    "y": 160,
+    "wires": [
+      [
+        "dt_node"
+      ]
+    ]
+  },
+  {
+    "id": "dt_inj_custom",
+    "type": "inject",
+    "z": "flow_dt",
+    "name": "Send fixed ISO date",
+    "props": [
+      {
+        "p": "payload",
+        "v": "2026-03-02T10:00:00+01:00",
+        "vt": "str"
+      }
+    ],
+    "repeat": "",
+    "crontab": "",
+    "once": false,
+    "onceDelay": 0.1,
+    "topic": "",
+    "x": 170,
+    "y": 220,
+    "wires": [
+      [
+        "dt_node"
+      ]
+    ]
+  },
+  {
+    "id": "dt_node",
+    "type": "knxUltimateUtility",
+    "z": "flow_dt",
+    "server": "dt_cfg_1",
+    "name": "KNX Clock",
+    "outputtopic": "events/knx/datetime",
+    "gaDateTime": "1/7/1",
+    "nameDateTime": "Bus DateTime",
+    "dptDateTime": "19.001",
+    "gaDate": "",
+    "nameDate": "",
+    "dptDate": "11.001",
+    "gaTime": "",
+    "nameTime": "",
+    "dptTime": "10.001",
+    "sendOnDeploy": true,
+    "sendOnDeployDelay": 2,
+    "periodicSend": false,
+    "periodicSendInterval": 60,
+    "periodicSendUnit": "m",
+    "x": 420,
+    "y": 190,
+    "wires": [
+      [
+        "dt_dbg"
+      ]
+    ],
+    "utilityType": "datetime",
+    "inputs": 0,
+    "outputs": 0
+  },
+  {
+    "id": "dt_dbg",
+    "type": "debug",
+    "z": "flow_dt",
+    "name": "DateTime out",
+    "active": true,
+    "tosidebar": true,
+    "console": false,
+    "tostatus": true,
+    "complete": "true",
+    "targetType": "full",
+    "x": 640,
+    "y": 190,
+    "wires": []
+  }
+]

package/examples/Load Control - Manual Shedding Mode.json

@@ -31,7 +31,7 @@
   },
   {
     "id": "lc_node",
-    "type": "knxUltimateLoadControl",
+    "type": "knxUltimateUtility",
     "z": "lc_tab",
     "server": "lc_cfg",
     "name": "Load Control",
@@ -82,7 +82,10 @@
       [
         "lc_dbg"
       ]
-    ]
+    ],
+    "utilityType": "loadcontrol",
+    "inputs": 1,
+    "outputs": 1
   },
   {
     "id": "lc_shed",

package/examples/Logger ETS File and Telegram Count.json

@@ -14,7 +14,7 @@
   },
   {
     "id": "logger_1",
-    "type": "knxUltimateLogger",
+    "type": "knxUltimateUtility",
     "z": "flow5",
     "server": "log_cfg_1",
     "topic": "",
@@ -26,7 +26,15 @@
     "intervalTelegramCount": 60,
     "x": 320,
     "y": 180,
-    "wires": [["logger_dbg_ets"],[]]
+    "wires": [
+      [
+        "logger_dbg_ets"
+      ],
+      []
+    ],
+    "utilityType": "logger",
+    "inputs": 1,
+    "outputs": 2
   },
   {
     "id": "logger_dbg_ets",

package/examples/Scene Controller Recall and Save.json

@@ -14,7 +14,7 @@
   },
   {
     "id": "scene_ctrl_1",
-    "type": "knxUltimateSceneController",
+    "type": "knxUltimateUtility",
     "z": "flow4",
     "server": "sc_cfg_1",
     "name": "Scene Recall/Save",
@@ -30,33 +30,60 @@
     "rules": [],
     "x": 410,
     "y": 200,
-    "wires": [["sc_dbg"]]
+    "wires": [
+      [
+        "sc_dbg"
+      ]
+    ],
+    "utilityType": "scenecontroller",
+    "inputs": 1,
+    "outputs": 1
   },
   {
     "id": "inj_recall",
     "type": "inject",
     "z": "flow4",
     "name": "Recall Scene 2",
-    "props": [{"p":"payload","v":"true","vt":"bool"}],
+    "props": [
+      {
+        "p": "payload",
+        "v": "true",
+        "vt": "bool"
+      }
+    ],
     "repeat": "",
     "once": false,
     "onceDelay": 0.1,
     "x": 180,
     "y": 180,
-    "wires": [["scene_ctrl_1"]]
+    "wires": [
+      [
+        "scene_ctrl_1"
+      ]
+    ]
   },
   {
     "id": "inj_save",
     "type": "inject",
     "z": "flow4",
     "name": "Save Scene 2",
-    "props": [{"p":"payload","v":"true","vt":"bool"}],
+    "props": [
+      {
+        "p": "payload",
+        "v": "true",
+        "vt": "bool"
+      }
+    ],
     "repeat": "",
     "once": false,
     "onceDelay": 0.1,
     "x": 170,
     "y": 240,
-    "wires": [["scene_ctrl_1"]]
+    "wires": [
+      [
+        "scene_ctrl_1"
+      ]
+    ]
   },
   {
     "id": "sc_dbg",

package/examples/Staircase - Timer, Override and Block.json

@@ -31,7 +31,7 @@
   },
   {
     "id": "stair_node_1",
-    "type": "knxUltimateStaircase",
+    "type": "knxUltimateUtility",
     "z": "stair_flow_1",
     "server": "stair_cfg_1",
     "name": "Staircase Light",
@@ -66,7 +66,10 @@
       [
         "stair_dbg_1"
       ]
-    ]
+    ],
+    "utilityType": "staircase",
+    "inputs": 1,
+    "outputs": 1
   },
   {
     "id": "stair_inj_on",