node-poppler 5.1.4 → 5.1.5

package/src/lib/win32/poppler-22.04.0/Library/share/man/man1/pdftoppm.1

@@ -1,230 +0,0 @@
-.\" Copyright 2005-2011 Glyph & Cog, LLC
-.TH pdftoppm 1 "15 August 2011"
-.SH NAME
-pdftoppm \- Portable Document Format (PDF) to Portable Pixmap (PPM)
-converter (version 3.03)
-.SH SYNOPSIS
-.B pdftoppm
-[options]
-.I PDF-file PPM-root
-.SH DESCRIPTION
-.B Pdftoppm
-converts Portable Document Format (PDF) files to color image files in
-Portable Pixmap (PPM) format, grayscale image files in Portable
-Graymap (PGM) format, or monochrome image files in Portable Bitmap
-(PBM) format.
-.PP
-Pdftoppm reads the PDF file,
-.IR PDF-file ,
-and writes one PPM file for each page,
-.IR PPM-root - number .ppm,
-where
-.I number
-is the page number.  If
-.I PDF-file
-is \'-', it reads the PDF file from stdin.
-.SH OPTIONS
-.TP
-.BI \-f " number"
-Specifies the first page to convert.
-.TP
-.BI \-l " number"
-Specifies the last page to convert.
-.TP
-.B \-o
-Generates only the odd numbered pages.
-.TP
-.B \-e
-Generates only the even numbered pages.
-.TP
-.BI \-singlefile
-Writes only the first page and does not add digits.
-.TP
-.BI \-r " number"
-Specifies the X and Y resolution, in DPI.  The default is 150 DPI.
-.TP
-.BI \-rx " number"
-Specifies the X resolution, in DPI.  The default is 150 DPI.
-.TP
-.BI \-ry " number"
-Specifies the Y resolution, in DPI.  The default is 150 DPI.
-.TP
-.BI \-scale-to " number"
-Scales the long side of each page (width for landscape pages, height
-for portrait pages) to fit in scale-to pixels. The size of the short
-side will be determined by the aspect ratio of the page.
-.TP
-.BI \-scale-to-x " number"
-Scales each page horizontally to fit in scale-to-x pixels. If
-scale-to-y is set to -1, the vertical size will determined by the
-aspect ratio of the page.
-.TP
-.BI \-scale-to-y " number"
-Scales each page vertically to fit in scale-to-y pixels. If scale-to-x
-is set to -1, the horizontal size will determined by the aspect ratio
-of the page.
-.TP
-.B \-scale-dimension-before-rotation
-Swaps horizontal and vertical size for a rotated (landscape) pdf before scaling instead of after.
-.TP
-.BI \-x " number"
-Specifies the x-coordinate of the crop area top left corner
-.TP
-.BI \-y " number"
-Specifies the y-coordinate of the crop area top left corner
-.TP
-.BI \-W " number"
-Specifies the width of crop area in pixels (default is 0)
-.TP
-.BI \-H " number"
-Specifies the height of crop area in pixels (default is 0)
-.TP
-.BI \-sz " number"
-Specifies the size of crop square in pixels (sets W and H)
-.TP
-.B \-cropbox
-Uses the crop box rather than media box when generating the files
-.TP
-.B \-hide-annotations
-Do not show annotations
-.TP
-.B \-mono
-Generate a monochrome PBM file (instead of a color PPM file).
-.TP
-.B \-gray
-Generate a grayscale PGM file (instead of a color PPM file).
-.TP
-.BI \-displayprofile " displayprofilefile"
-If poppler is compiled with colour management support, this option sets the display profile
-to the ICC profile stored in displayprofilefile.
-.TP
-.BI \-defaultgrayprofile " defaultgrayprofilefile"
-If poppler is compiled with colour management support, this option sets the DefaultGray color space
-to the ICC profile stored in defaultgrayprofilefile.
-.TP
-.BI \-defaultrgbprofile " defaultrgbprofilefile"
-If poppler is compiled with colour management support, this option sets the DefaultRGB color space
-to the ICC profile stored in defaultrgbprofilefile.
-.TP
-.BI \-defaultcmykprofile " defaultcmykprofilefile"
-If poppler is compiled with colour management support, this option sets the DefaultCMYK color space
-to the ICC profile stored in defaultcmykprofilefile.
-.TP
-.B \-png
-Generates a PNG file instead a PPM file.
-.TP
-.B \-jpeg
-Generates a JPEG file instead a PPM file.
-.TP
-.BI \-jpegopt " jpeg-options"
-When used with \-jpeg, takes a list of options to control the jpeg compression. See
-.B JPEG OPTIONS
-for the available options.
-.TP
-.B \-tiff
-Generates a TIFF file instead a PPM file.
-.TP
-.BI \-tiffcompression " none | packbits | jpeg | lzw | deflate"
-Specifies the TIFF compression type.  This defaults to "none".
-.TP
-.BI \-freetype " yes | no"
-Enable or disable FreeType (a TrueType / Type 1 font rasterizer).
-This defaults to "yes".
-.TP
-.BI \-thinlinemode " none | solid | shape"
-Specifies the thin line mode. This defaults to "none".
-.TP
-"solid": 
-adjust lines with a width less than one pixel to pixel boundary 
-and paint it with a width of one pixel.
-.TP
-"shape": 
-adjust lines with a width less than one pixel to pixel boundary 
-and paint it with a width of one pixel but with a shape in proportion
-to its width.
-.TP
-.BI \-aa " yes | no"
-Enable or disable font anti-aliasing.  This defaults to "yes".
-.TP
-.BI \-aaVector " yes | no"
-Enable or disable vector anti-aliasing.  This defaults to "yes".
-.TP
-.BI \-opw " password"
-Specify the owner password for the PDF file.  Providing this will
-bypass all security restrictions.
-.TP
-.BI \-upw " password"
-Specify the user password for the PDF file.
-.TP
-.B \-q
-Don't print any messages or errors.
-.TP
-.B \-progress
-Print progress info as each page is generated.  Three space-separated
-fields are printed to STDERR: the number of the current page, the number
-of the last page that will be generated, and the path to the file
-written to.
-.TP
-.BI \-sep " char"
-Specify single character separator between name and page number, default - .
-.TP
-.B \-forcenum
-Force page number even if there is only one page.
-.TP
-.B \-v
-Print copyright and version information.
-.TP
-.B \-h
-Print usage information.
-.RB ( \-help
-and
-.B \-\-help
-are equivalent.)
-.SH EXIT CODES
-The Xpdf tools use the following exit codes:
-.TP
-0
-No error.
-.TP
-1
-Error opening a PDF file.
-.TP
-2
-Error opening an output file.
-.TP
-3
-Error related to PDF permissions.
-.TP
-99
-Other error.
-.SH JPEG OPTIONS
-When JPEG output is specified, the \-jpegopt option can be used to control the JPEG compression parameters.
-It takes a string of the form "<opt>=<val>[,<opt>=<val>]". Currently the available options are:
-.TP
-.BI quality
-Selects the JPEG quality value. The value must be an integer between 0 and 100.
-.TP
-.BI progressive
-Select progressive JPEG output. The possible values are "y", "n",
-indicating progressive (yes) or non-progressive (no), respectively.
-.TP
-.BI optimize
-Sets whether to compute optimal Huffman coding tables for the JPEG output, which
-will create smaller files but make an extra pass over the data. The value must
-be "y" or "n", with "y" performing optimization, otherwise the default Huffman
-tables are used.
-.SH AUTHOR
-The pdftoppm software and documentation are copyright 1996-2011 Glyph
-& Cog, LLC.
-.SH "SEE ALSO"
-.BR pdfdetach (1),
-.BR pdffonts (1),
-.BR pdfimages (1),
-.BR pdfinfo (1),
-.BR pdftocairo (1),
-.BR pdftohtml (1),
-.BR pdftops (1),
-.BR pdftotext (1)
-.BR pdfseparate (1),
-.BR pdfsig (1),
-.BR pdfunite (1)

package/src/lib/win32/poppler-22.04.0/Library/share/man/man1/pdftops.1

@@ -1,267 +0,0 @@
-.\" Copyright 1996-2011 Glyph & Cog, LLC
-.TH pdftops 1 "15 August 2011"
-.SH NAME
-pdftops \- Portable Document Format (PDF) to PostScript converter
-(version 3.03)
-.SH SYNOPSIS
-.B pdftops
-[options]
-.RI <PDF-file>
-.RI [<PS-file>]
-.SH DESCRIPTION
-.B Pdftops
-converts Portable Document Format (PDF) files to PostScript so they
-can be printed.
-.PP
-Pdftops reads the PDF file,
-.IR PDF-file ,
-and writes a PostScript file,
-.IR PS-file .
-If
-.I PS-file
-is not specified, pdftops converts
-.I file.pdf
-to
-.I file.ps
-(or
-.I file.eps
-with the \-eps option).  If
-.I PS-file
-is \'-', the PostScript is sent to stdout.  If
-.I PDF-file
-is \'-', Pdftops reads the PDF file from stdin.
-.SH OPTIONS
-.TP
-.BI \-f " number"
-Specifies the first page to print.
-.TP
-.BI \-l " number"
-Specifies the last page to print.
-.TP
-.B \-level1
-Generate Level 1 PostScript.  The resulting PostScript files will be
-significantly larger (if they contain images), but will print on Level
-1 printers.  This also converts all images to black and white.  No
-more than one of the PostScript level options (\-level1, \-level1sep,
-\-level2, \-level2sep, \-level3, \-level3sep) may be given.
-.TP
-.B \-level1sep
-Generate Level 1 separable PostScript.  All colors are converted to
-CMYK.  Images are written with separate stream data for the four
-components.
-.TP
-.B \-level2
-Generate Level 2 PostScript.  Level 2 supports color images and image
-compression.  This is the default setting.
-.TP
-.B \-level2sep
-Generate Level 2 separable PostScript.  All colors are converted to
-CMYK.  The PostScript separation convention operators are used to
-handle custom (spot) colors.
-.TP
-.B \-level3
-Generate Level 3 PostScript.  This enables all Level 2 features plus
-CID font embedding.
-.TP
-.B \-level3sep
-Generate Level 3 separable PostScript.  The separation handling is the
-same as for \-level2sep.
-.TP
-.B \-eps
-Generate an Encapsulated PostScript (EPS) file.  An EPS file contains
-a single image, so if you use this option with a multi-page PDF file,
-you must use \-f and \-l to specify a single page.  No more than one of
-the mode options (\-eps, \-form) may be given.
-.TP
-.B \-form
-Generate a PostScript form which can be imported by software that
-understands forms.  A form contains a single page, so if you use this
-option with a multi-page PDF file, you must use \-f and \-l to specify a
-single page.  The \-level1 option cannot be used with \-form.  No more
-than one of the mode options (\-eps, \-form) may be
-given.
-.TP
-.B \-opi
-Generate OPI comments for all images and forms which have OPI
-information.  (This option is only available if pdftops was compiled
-with OPI support.)
-.TP
-.B \-binary
-Write binary data in Level 1 PostScript.  By default, pdftops writes
-hex-encoded data in Level 1 PostScript.  Binary data is non-standard
-in Level 1 PostScript but reduces the file size and can be useful
-when Level 1 PostScript is required only for its restricted use
-of PostScript operators.
-.TP
-.BI \-r " number"
-Set the resolution in DPI when pdftops rasterizes images with
-transparencies or, for Level 1 PostScript, when pdftops
-rasterizes images with color masks.
-By default, pdftops rasterizes images to 300 DPI.
-.TP
-.B \-noembt1
-By default, any Type 1 fonts which are embedded in the PDF file are
-copied into the PostScript file.  This option causes pdftops to
-substitute base fonts instead.  Embedded fonts make PostScript files
-larger, but may be necessary for readable output.
-.TP
-.B \-noembtt
-By default, any TrueType fonts which are embedded in the PDF file are
-copied into the PostScript file.  This option causes pdftops to
-substitute base fonts instead.  Embedded fonts make PostScript files
-larger, but may be necessary for readable output.  Also, some
-PostScript interpreters do not have TrueType rasterizers.
-.TP
-.B \-noembcidps
-By default, any CID PostScript fonts which are embedded in the PDF
-file are copied into the PostScript file.  This option disables that
-embedding.  No attempt is made to substitute for non-embedded CID
-PostScript fonts.
-.TP
-.B \-noembcidtt
-By default, any CID TrueType fonts which are embedded in the PDF file
-are copied into the PostScript file.  This option disables that
-embedding.  No attempt is made to substitute for non-embedded CID
-TrueType fonts.
-.TP
-.B \-passfonts
-By default, references to non-embedded 8-bit fonts in the PDF file are
-substituted with the closest "Helvetica", "Times-Roman", or "Courier" font.
-This option passes references to non-embedded fonts
-through to the PostScript file.
-.TP
-.BI \-aaRaster " yes | no"
-Enable or disable raster anti-aliasing.  This defaults to "no".
-pdftops may need to rasterize transparencies and pattern image masks in the PDF.
-If the PostScript will be printed, leave \-aaRaster disabled and set \-r to the resolution of the printer.
-If the PostScript will be viewed, enabling \-aaRaster may make rasterized text easier to read.
-.TP
-.BI \-rasterize " always | never | whenneeded"
-By default, pdftops rasterizes pages as needed, for example, if they contain transparencies.
-To force rasterization, set \-rasterize to "always". Use this to eliminate fonts.
-To prevent rasterization, set \-rasterize to "never". This may produce files that display incorrectly.
-.TP
-.BI \-processcolorformat " MONO8 | CMYK8 | RGB8"
-Sets the process color format as it is used during rasterization and transparency reduction.
-The default depends on the other settings: For \-level1 the default is MONO8, for \-level{1,2,3}sep
-or \-overprint the default is CMYK8, and in all other cases RGB8 is the default. If \-processcolorprofile
-is given then \-processcolorformat is inferred from the specified ICC profile.
-.TP
-.BI \-processcolorprofile " filename"
-Sets the ICC profile that is assumed during rasterization and transparency reduction.
-.TP
-.BI \-defaultgrayprofile " defaultgrayprofilefile"
-If poppler is compiled with colour management support, this option sets the DefaultGray color space
-to the ICC profile stored in defaultgrayprofilefile.
-.TP
-.BI \-defaultrgbprofile " defaultrgbprofilefile"
-If poppler is compiled with colour management support, this option sets the DefaultRGB color space
-to the ICC profile stored in defaultrgbprofilefile.
-.TP
-.BI \-defaultcmykprofile " defaultcmykprofilefile"
-If poppler is compiled with colour management support, this option sets the DefaultCMYK color space
-to the ICC profile stored in defaultcmykprofilefile.
-.TP
-.B \-optimizecolorspace
-By default, bitmap images in the PDF pass through to the output PostScript
-in their original color space, which produces predictable results.
-This option converts RGB and CMYK images into Gray images
-if every pixel of the image has equal components.
-This can fix problems when doing color separations of PDFs
-that contain embedded black and white images encoded as RGB.
-.TP
-.B \-preload
-preload images and forms
-.TP
-.BI \-paper " size"
-Set the paper size to one of "letter", "legal", "A4", or "A3".  This
-can also be set to "match", which will set the paper size of each page to match the
-size specified in the PDF file. If none the \-paper, \-paperw, or \-paperh
-options are specified the default is to match the paper size.
-.TP
-.BI \-paperw " size"
-Set the paper width, in points.
-.TP
-.BI \-paperh " size"
-Set the paper height, in points.
-.TP
-.B \-origpagesizes
-This option is the same as "\-paper match".
-.TP
-.B \-nocrop
-By default, output is cropped to the CropBox specified in the PDF
-file.  This option disables cropping.
-.TP
-.B \-expand
-Expand PDF pages smaller than the paper to fill the paper.  By
-default, these pages are not scaled.
-.TP
-.B \-noshrink
-Don't scale PDF pages which are larger than the paper.  By default,
-pages larger than the paper are shrunk to fit.
-.TP
-.B \-nocenter
-By default, PDF pages smaller than the paper (after any scaling) are
-centered on the paper.  This option causes them to be aligned to the
-lower-left corner of the paper instead.
-.TP
-.B \-duplex
-Set the Duplex pagedevice entry in the PostScript file.  This tells
-duplex-capable printers to enable duplexing.
-.TP
-.BI \-opw " password"
-Specify the owner password for the PDF file.  Providing this will
-bypass all security restrictions.
-.TP
-.BI \-upw " password"
-Specify the user password for the PDF file.
-.TP
-.B \-overprint
-Enable overprint emulation during rasterization. For \-processcolorformat being CMYK8 and the language level
-being higher than 2, this option is set to true by default. Note: This option requires \-processcolorformat to
-be CMYK8.
-.TP
-.B \-q
-Don't print any messages or errors.
-.TP
-.B \-v
-Print copyright and version information.
-.TP
-.B \-h
-Print usage information.
-.RB ( \-help
-and
-.B \-\-help
-are equivalent.)
-.SH EXIT CODES
-The Xpdf tools use the following exit codes:
-.TP
-0
-No error.
-.TP
-1
-Error opening a PDF file.
-.TP
-2
-Error opening an output file.
-.TP
-3
-Error related to PDF permissions.
-.TP
-99
-Other error.
-.SH AUTHOR
-The pdftops software and documentation are copyright 1996-2011 Glyph &
-Cog, LLC.
-.SH "SEE ALSO"
-.BR pdfdetach (1),
-.BR pdffonts (1),
-.BR pdfimages (1),
-.BR pdfinfo (1),
-.BR pdftocairo (1),
-.BR pdftohtml (1),
-.BR pdftoppm (1),
-.BR pdftotext (1)
-.BR pdfseparate (1),
-.BR pdfsig (1),
-.BR pdfunite (1)

package/src/lib/win32/poppler-22.04.0/Library/share/man/man1/pdftotext.1

@@ -1,157 +0,0 @@
-.\" Copyright 1997-2011 Glyph & Cog, LLC
-.TH pdftotext 1 "15 August 2011"
-.SH NAME
-pdftotext \- Portable Document Format (PDF) to text converter
-(version 3.03)
-.SH SYNOPSIS
-.B pdftotext
-[options]
-.RI [ PDF-file
-.RI [ text-file ]]
-.SH DESCRIPTION
-.B Pdftotext
-converts Portable Document Format (PDF) files to plain text.
-.PP
-Pdftotext reads the PDF file,
-.IR PDF-file ,
-and writes a text file,
-.IR text-file .
-If
-.I text-file
-is not specified, pdftotext converts
-.I file.pdf
-to
-.IR file.txt .
-If 
-.I text-file
-is \'-', the text is sent to stdout.  If
-.I PDF-file
-is \'-', it reads the PDF file from stdin.
-.SH OPTIONS
-.TP
-.BI \-f " number"
-Specifies the first page to convert.
-.TP
-.BI \-l " number"
-Specifies the last page to convert.
-.TP
-.BI \-r " number"
-Specifies the resolution, in DPI.  The default is 72 DPI.
-.TP
-.BI \-x " number"
-Specifies the x-coordinate of the crop area top left corner
-.TP
-.BI \-y " number"
-Specifies the y-coordinate of the crop area top left corner
-.TP
-.BI \-W " number"
-Specifies the width of crop area in pixels (default is 0)
-.TP
-.BI \-H " number"
-Specifies the height of crop area in pixels (default is 0)
-.TP
-.B \-layout
-Maintain (as best as possible) the original physical layout of the
-text.  The default is to \'undo' physical layout (columns,
-hyphenation, etc.) and output the text in reading order.
-.TP
-.BI \-fixed " number"
-Assume fixed-pitch (or tabular) text, with the specified character
-width (in points).  This forces physical layout mode.
-.TP
-.B \-raw
-Keep the text in content stream order.  This is a hack which often
-"undoes" column formatting, etc.  Use of raw mode is no longer
-recommended.
-.TP
-.B \-nodiag
-Discard diagonal text (i.e., text that is not close to one of the
-0, 90, 180, or 270 degree axes). This is useful for skipping
-watermarks drawn on body text.
-.TP
-.B \-htmlmeta
-Generate a simple HTML file, including the meta information.  This
-simply wraps the text in <pre> and </pre> and prepends the meta
-headers.
-.TP
-.B \-bbox
-Generate an XHTML file containing bounding box information for each
-word in the file.
-.TP
-.B \-bbox-layout
-Generate an XHTML file containing bounding box information for each
-block, line, and word in the file.
-.TP
-.B \-cropbox
-Use the crop box rather than the media box with \-bbox and \-bbox-layout.
-.TP
-.BI \-colspacing " number"
-Specifies how much spacing we allow after a word before considering adjacent text to be a new column, measured as a fraction of the font size. Current default is 0.7, old releases had a 0.3 default.
-.TP
-.BI \-enc " encoding-name"
-Sets the encoding to use for text output. This defaults to "UTF-8".
-.TP
-.B \-listenc
-Lists the available encodings
-.TP
-.BI \-eol " unix | dos | mac"
-Sets the end-of-line convention to use for text output.
-.TP
-.B \-nopgbrk
-Don't insert page breaks (form feed characters) between pages.
-.TP
-.BI \-opw " password"
-Specify the owner password for the PDF file.  Providing this will
-bypass all security restrictions.
-.TP
-.BI \-upw " password"
-Specify the user password for the PDF file.
-.TP
-.B \-q
-Don't print any messages or errors.
-.TP
-.B \-v
-Print copyright and version information.
-.TP
-.B \-h
-Print usage information.
-.RB ( \-help
-and
-.B \-\-help
-are equivalent.)
-.SH BUGS
-Some PDF files contain fonts whose encodings have been mangled beyond
-recognition.  There is no way (short of OCR) to extract text from
-these files.
-.SH EXIT CODES
-The Xpdf tools use the following exit codes:
-.TP
-0
-No error.
-.TP
-1
-Error opening a PDF file.
-.TP
-2
-Error opening an output file.
-.TP
-3
-Error related to PDF permissions.
-.TP
-99
-Other error.
-.SH AUTHOR
-The pdftotext software and documentation are copyright 1996-2011 Glyph
-& Cog, LLC.
-.SH "SEE ALSO"
-.BR pdfdetach (1),
-.BR pdffonts (1),
-.BR pdfimages (1),
-.BR pdfinfo (1),
-.BR pdftocairo (1),
-.BR pdftohtml (1),
-.BR pdftoppm (1),
-.BR pdftops (1),
-.BR pdfseparate (1),
-.BR pdfsig (1),
-.BR pdfunite (1)

package/src/lib/win32/poppler-22.04.0/Library/share/man/man1/pdfunite.1

@@ -1,43 +0,0 @@
-.\" Copyright 2011 The Poppler Developers - http://poppler.freedesktop.org
-.TH pdfunite 1 "15 September 2011"
-.SH NAME
-pdfunite \- Portable Document Format (PDF) page merger
-.SH SYNOPSIS
-.B pdfunite
-[options]
-.I PDF-sourcefile1..PDF-sourcefilen PDF-destfile
-.SH DESCRIPTION
-.B pdfunite
-merges several PDF (Portable Document Format) files in order of their occurrence on command line to one PDF result file.
-.TP
-Neither of the PDF-sourcefile1 to PDF-sourcefilen should be encrypted.
-.SH OPTIONS
-.TP
-.B \-v
-Print copyright and version information.
-.TP
-.B \-h
-Print usage information.
-.RB ( \-help
-and
-.B \-\-help
-are equivalent.)
-.SH EXAMPLE
-pdfunite sample1.pdf sample2.pdf sample.pdf
-.TP
-merges all pages from sample1.pdf and sample2.pdf (in that order) and creates sample.pdf
-.SH AUTHOR
-The pdfunite software and documentation are copyright 1996-2004 Glyph & Cog, LLC
-and copyright 2005-2011 The Poppler Developers - http://poppler.freedesktop.org
-.SH "SEE ALSO"
-.BR pdfdetach (1),
-.BR pdffonts (1),
-.BR pdfimages (1),
-.BR pdfinfo (1),
-.BR pdftocairo (1),
-.BR pdftohtml (1),
-.BR pdftoppm (1),
-.BR pdftops (1),
-.BR pdftotext (1)
-.BR pdfseparate (1),
-.BR pdfsig (1)