node-poppler 5.1.3 → 5.1.6

package/src/lib/win32/poppler-22.01.0/Library/share/man/man1/pdftocairo.1

@@ -1,346 +0,0 @@
-.TH pdftocairo 1
-.SH NAME
-pdftocairo \- Portable Document Format (PDF) to PNG/JPEG/TIFF/PDF/PS/EPS/SVG using cairo
-.SH SYNOPSIS
-.B pdftocairo
-[options]
-.IR PDF-file
-.RI [ output-file ]
-.SH DESCRIPTION
-.B pdftocairo
-converts Portable Document Format (PDF) files, using the cairo output device of the poppler PDF library, to any of the following output formats:
-.IP \(bu
-Portable Network Graphics (PNG)
-.IP \(bu
-JPEG Interchange Format (JPEG)
-.IP \(bu
-Tagged Image File Format (TIFF)
-.IP \(bu
-Portable Document Format (PDF)
-.IP \(bu
-PostScript (PS)
-.IP \(bu
-Encapsulated PostScript (EPS)
-.IP \(bu
-Scalable Vector Graphics (SVG)
-.IP \(bu
-Windows Printer
-.PP
-.B pdftocairo
-reads the PDF file,
-.IR PDF-file ,
-and writes to
-.IR output-file .
-The image formats (PNG, JPEG, and TIFF) generate one file per page with the page number and file type appended to
-.IR output-file .
-When \-singlefile is used with the image formats, the file type is appended to
-.IR output-file .
-When the output format is a vector format (PDF, PS, EPS, and SVG),
-.IR output-file
-is the full filename.
-
-If the
-.IR PDF-file
-is \*(lq\-\*(rq , the PDF is read from stdin.
-If the
-.IR output-file
-is \*(lq\-\*(rq , the output file will be written to stdout. Using stdout is not valid with image formats unless \-singlefile is used.
-If
-.IR output-file
-is not used, the output filename will be derived from the
-.IR PDF-file
-filename.
-.PP
-Not all options are valid with all output formats. One (and only one) of the output format options (\-png, \-jpeg, \-tiff, \-pdf, \-print, \-ps, \-eps, or \-svg) must be used.
-.PP
-The resolution options (\-r, \-rx, \-ry) set the resolution of the
-image output formats. The image dimensions will depend on the PDF page
-size and the resolution. For the vector outputs, regions of the page
-that can not be represented natively in the output format (eg
-translucency in PS) will be rasterized at the resolution specified by
-the resolution options.
-.PP
-The \-scale-to options may be used to set a fixed image size. The
-image resolution will vary with the page size.
-.PP
-The cropping options (\-x, \-y, \-W, and \-H) use units of pixels with
-the image formats and PostScript points (1/72 inch) with the vector
-formats. When cropping is used with vector output the cropped region is
-centered unless \-nocenter is used in which case the cropped region is
-at the top left (SVG) or bottom left (PDF, PS, EPS).
-.PP
-.SH OPTIONS
-.TP
-.BI \-png
-Generates a PNG file(s)
-.TP
-.BI \-jpeg
-Generates a JPEG file(s). See also \-jpegopt.
-.TP
-.BI \-tiff
-Generates a TIFF file(s)
-.TP
-.BI \-pdf
-Generates a PDF file
-.TP
-.BI \-ps
-Generate a PS file
-.TP
-.BI \-eps
-Generate an EPS file. An EPS file contains a single image, so if you
-use this option with a multi-page PDF file, you must use \-f and \-l
-to specify a single page.  The page size options (\-origpagesizes,
-\-paper, \-paperw, \-paperh) can not be used with this option.
-.TP
-.BI \-svg
-Generate a SVG (Scalable Vector Graphics) file
-.TP
-.BI \-print
-(Windows only) Prints to a system printer. See also \-printer and \-printeropt.
- If an output file is not specified, the output will be sent to the printer.
- The output file '-' can not be used with this option.
-.TP
-.BI \-printdlg
-(Windows only) Prints to a system printer. Displays the print dialog to allow
-the print options to be modified before printing.
-.TP
-.BI \-f " number"
-Specifies the first page to convert.
-.TP
-.BI \-l " number"
-Specifies the last page to convert.
-.TP
-.B \-o
-Generates only the odd numbered pages.
-.TP
-.B \-e
-Generates only the even numbered pages.
-.TP
-.BI \-singlefile
-Writes only the first page and does not add digits.
-.TP
-.BI \-r " number"
-Specifies the X and Y resolution, in pixels per inch of image files (or rasterized regions in vector output). The default is 150 PPI.
-.TP
-.BI \-rx " number"
-Specifies the X resolution, in pixels per inch of image files (or rasterized regions in vector output). The default is 150 PPI.
-.TP
-.BI \-ry " number"
-Specifies the Y resolution, in pixels per inch of image files (or rasterized regions in vector output). The default is 150 PPI.
-.TP
-.BI \-scale-to " number"
-Scales the long side of each page (width for landscape pages, height
-for portrait pages) to fit in scale-to pixels. The size of the short
-side will be determined by the aspect ratio of the page (PNG/JPEG/TIFF only).
-.TP
-.BI \-scale-to-x " number"
-Scales each page horizontally to fit in scale-to-x pixels. If
-scale-to-y is set to -1, the vertical size will determined by the
-aspect ratio of the page (PNG/JPEG/TIFF only).
-.TP
-.BI \-scale-to-y " number"
-Scales each page vertically to fit in scale-to-y pixels. If scale-to-x
-is set to -1, the horizontal size will determined by the aspect ratio
-of the page (PNG/JPEG/TIFF only).
-.TP
-.BI \-x " number"
-Specifies the x-coordinate of the crop area top left corner in pixels (image output) or points (vector output)
-.TP
-.BI \-y " number"
-Specifies the y-coordinate of the crop area top left corner in pixels (image output) or points (vector output)
-.TP
-.BI \-W " number"
-Specifies the width of crop area in pixels (image output) or points (vector output)  (default is 0)
-.TP
-.BI \-H " number"
-Specifies the height of crop area in pixels (image output) or points (vector output)  (default is 0)
-.TP
-.BI \-sz " number"
-Specifies the size of crop square in pixels (image output) or points (vector output)  (sets \-W and \-H)
-.TP
-.B \-cropbox
-Uses the crop box rather than media box when generating the files (PNG/JPEG/TIFF only)
-.TP
-.B \-mono
-Generate a monochrome file (PNG and TIFF only).
-.TP
-.B \-gray
-Generate a grayscale file (PNG, JPEG, and TIFF only).
-.TP
-.B \-antialias
-Set the cairo antialias option used for text and drawing in image files (or rasterized regions in vector output). The options are:
-.RS
-.TP
-.B default
-Use the default antialiasing for the target device. This is the default setting if \-antialias is not used.
-.TP
-.B none
-Antialiasing is disabled.
-.TP
-.B gray
-Perform single-color antialiasing using shades of gray.
-.TP
-.B subpixel
-Perform antialiasing by taking advantage of the order of subpixel elements on devices such as LCD.
-.TP
-.B fast
-Hint that the backend should perform some antialiasing but prefer speed over quality.
-.TP
-.B good
-The backend should balance quality against performance.
-.TP
-.B best
-Hint that the backend should render at the highest quality, sacrificing speed if necessary.
-.RE
-.TP
-.B \-transp
-Use a transparent page color instead of white (PNG and TIFF only).
-.TP
-.BI \-icc " icc-file"
-Use the specified ICC file as the output profile (PNG only). The profile will be embedded in the PNG file.
-.TP
-.BI \-jpegopt " jpeg-options"
-When used with \-jpeg, takes a list of options to control the jpeg compression. See
-.B JPEG OPTIONS
-for the available options.
-.TP
-.B \-level2
-Generate Level 2 PostScript (PS only).
-.TP
-.B \-level3
-Generate Level 3 PostScript (PS only). This enables all Level 2 features plus
-shading patterns and masked images. This is the default setting.
-.TP
-.B \-origpagesizes
-This option is the same as "\-paper match".
-.TP
-.BI \-paper " size"
-Set the paper size to one of "letter", "legal", "A4", or "A3"
-(PS,PDF,SVG only).  This can also be set to "match", which will set
-the paper size of each page to match the size specified in the PDF
-file. If none the \-paper, \-paperw, or \-paperh options are
-specified the default is to match the paper size.
-.TP
-.BI \-paperw " size"
-Set the paper width, in points (PS,PDF,SVG only).
-.TP
-.BI \-paperh " size"
-Set the paper height, in points (PS,PDF,SVG only).
-.TP
-.B \-nocrop
-By default, printing output is cropped to the CropBox specified in the PDF
-file.  This option disables cropping (PS,PDF,SVG only).
-.TP
-.B \-expand
-Expand PDF pages smaller than the paper to fill the paper (PS,PDF,SVG only).  By
-default, these pages are not scaled.
-.TP
-.B \-noshrink
-Don't scale PDF pages which are larger than the paper (PS,PDF,SVG only).  By default,
-pages larger than the paper are shrunk to fit.
-.TP
-.B \-nocenter
-By default, PDF pages smaller than the paper (after any scaling) are
-centered on the paper.  This option causes them to be aligned to the
-lower-left corner of the paper instead (PS,PDF,SVG only).
-.TP
-.B \-duplex
-Adds the %%IncludeFeature: *Duplex DuplexNoTumble DSC comment to the
-PostScript file (PS only).  This tells the print manager to enable duplexing.
-.TP
-.BI \-printer " printer-name"
-(Windows only). When used with \-print, specifies the name of the printer to be used, instead of the system default.
-.TP
-.BI \-printopt " printer-options"
-(Windows only). When used with \-print, takes a list of options to be used to configure the printer. See
-.B WINDOWS PRINTER OPTIONS
-for the available options.
-.TP
-.BI \-setupdlg
-(Windows only). When used with \-print, the printer properties dialog is displayed
-allowing the print settings to be modified before printing. The paper size selected
-in the print properties dialog will be used except when -origpagesizes is specified.
-.TP
-.BI \-opw " password"
-Specify the owner password for the PDF file.  Providing this will
-bypass all security restrictions.
-.TP
-.BI \-upw " password"
-Specify the user password for the PDF file.
-.TP
-.B \-q
-Don't print any messages or errors.
-.TP
-.B \-v
-Print copyright and version information.
-.TP
-.B \-h
-Print usage information.
-.RB ( \-help
-and
-.B \-\-help
-are equivalent.)
-.SH EXIT CODES
-The poppler tools use the following exit codes:
-.TP
-0
-No error.
-.TP
-1
-Error opening a PDF file.
-.TP
-2
-Error opening an output file.
-.TP
-3
-Error related to PDF permissions.
-.TP
-4
-Error related to ICC profile.
-.TP
-99
-Other error.
-.SH JPEG OPTIONS
-When JPEG output is specified, the \-jpegopt option can be used to control the JPEG compression parameters.
-It takes a string of the form "<opt>=<val>[,<opt>=<val>]". Currently the available options are:
-.TP
-.BI quality
-Selects the JPEG quality value. The value must be an integer between 0 and 100.
-.TP
-.BI progressive
-Select progressive JPEG output. The possible values are "y", "n",
-indicating progressive (yes) or non-progressive (no), respectively.
-.TP
-.BI optimize
-Sets whether to compute optimal Huffman coding tables for the JPEG output, which
-will create smaller files but make an extra pass over the data. The value must
-be "y" or "n", with "y" performing optimization, otherwise the default Huffman
-tables are used.
-.SH WINDOWS PRINTER OPTIONS
-In Windows, you can use the \-print option to print directly to a system printer. Additionally, you can use the \-printopt 
-option to configure the printer. It takes a string of the form "<opt>=<val>[,<opt>=<val>]". Currently the available options are:
-.TP
-.BI source
-Selects the source paper tray to be used (bin). The possible values are "upper", "onlyone", "lower", "middle", "manual", "envelope",
-"envmanual", "auto", "tractor", "smallfmt", "largefmt", "largecapacity", "formsource", or a numeric value to choose a driver specific source.
-.TP
-.BI duplex
-Sets the duplex mode of the printer. The possible values are "off", "short" or "long",
-indicating no duplexing, short-edge binding, or long-edge binding, respectively.
-General option \-duplex is a synonym of "duplex=long". If both options are specified,
-\-printopt has priority.
-.SH AUTHOR
-The pdftocairo software and documentation are copyright 1996-2004 Glyph
-& Cog, LLC and copyright 2005-2011 The Poppler Developers.
-.SH "SEE ALSO"
-.BR pdfdetach (1),
-.BR pdffonts (1),
-.BR pdfimages (1),
-.BR pdfinfo (1),
-.BR pdftohtml (1),
-.BR pdftoppm (1),
-.BR pdftops (1),
-.BR pdftotext (1)
-.BR pdfseparate (1),
-.BR pdfsig (1),
-.BR pdfunite (1)

package/src/lib/win32/poppler-22.01.0/Library/share/man/man1/pdftohtml.1

@@ -1,118 +0,0 @@
-.TH PDFTOHTML 1
-.\" NAME should be all caps, SECTION should be 1-8, maybe w/ subsection
-.\" other parms are allowed: see man(7), man(1)
-.SH NAME
-pdftohtml \- program to convert PDF files into HTML, XML and PNG images
-.SH SYNOPSIS
-.B pdftohtml
-.I "[options] <PDF-file> [<HTML-file> <XML-file>]"
-.SH "DESCRIPTION"
-This manual page documents briefly the
-.BR pdftohtml 
-command.
-This manual page was written for the Debian GNU/Linux distribution
-because the original program does not have a manual page.
-.PP
-.B pdftohtml
-is a program that converts PDF documents into HTML. It generates its output in
-the current working directory.  If
-.I PDF-file
-is \'-', it reads the PDF file from stdin.
-.SH OPTIONS
-A summary of options are included below.
-.TP
-.B \-h, \-help
-Show summary of options.
-.TP
-.B \-f <int>
-first page to print
-.TP
-.B \-l <int>
-last page to print
-.TP
-.B \-q
-do not print any messages or errors
-.TP
-.B \-v
-print copyright and version info
-.TP
-.B \-p
-exchange .pdf links with .html
-.TP
-.B \-c
-generate complex output
-.TP
-.B \-s
-generate single HTML that includes all pages
-.TP
-.B \-dataurls
-use data URLs instead of external images in HTML. No available in all platforms
-.TP
-.B \-i
-ignore images
-.TP
-.B \-noframes
-generate no frames. Not supported in complex output mode.
-.TP
-.B \-stdout
-use standard output
-.TP 
-.B \-zoom <fp>
-zoom the PDF document (default 1.5) (1 means 72 DPI)
-.TP
-.B \-xml
-output for XML post-processing
-.TP
-.B \-noroundcoord
-do not round coordinates (with XML output only)
-.TP
-.B \-enc <string>
-output text encoding name
-.TP
-.B \-opw <string>
-owner password (for encrypted files)
-.TP
-.B \-upw <string>
-user password (for encrypted files)
-.TP
-.B \-hidden
-force hidden text extraction
-.TP
-.B \-fmt
-image file format for Splash output (png or jpg).
-If complex is selected, but \-fmt is not specified,
-\-fmt png will be assumed
-.TP
-.B \-nomerge
-do not merge paragraphs
-.TP
-.B \-nodrm
-override document DRM settings
-.TP
-.B \-wbt <fp>
-adjust the word break threshold percent. Default is 10.
-Word break occurs when distance between two adjacent characters is
-greater than this percent of character height.
-.TP
-.B \-fontfullname
-outputs the font name without any substitutions.
-
-.SH AUTHOR
-
-Pdftohtml was developed by Gueorgui Ovtcharov and Rainer Dorsch. It is
-based and benefits a lot from Derek Noonburg's xpdf package.
-
-This manual page was written by Søren Boll Overgaard <boll@debian.org>,
-for the Debian GNU/Linux system (but may be used by others).
-.SH "SEE ALSO"
-.BR pdfdetach (1),
-.BR pdffonts (1),
-.BR pdfimages (1),
-.BR pdfinfo (1),
-.BR pdftocairo (1),
-.BR pdftoppm (1),
-.BR pdftops (1),
-.BR pdftotext (1)
-.BR pdfseparate (1),
-.BR pdfsig (1),
-.BR pdfunite (1)

package/src/lib/win32/poppler-22.01.0/Library/share/man/man1/pdftoppm.1

@@ -1,230 +0,0 @@
-.\" Copyright 2005-2011 Glyph & Cog, LLC
-.TH pdftoppm 1 "15 August 2011"
-.SH NAME
-pdftoppm \- Portable Document Format (PDF) to Portable Pixmap (PPM)
-converter (version 3.03)
-.SH SYNOPSIS
-.B pdftoppm
-[options]
-.I PDF-file PPM-root
-.SH DESCRIPTION
-.B Pdftoppm
-converts Portable Document Format (PDF) files to color image files in
-Portable Pixmap (PPM) format, grayscale image files in Portable
-Graymap (PGM) format, or monochrome image files in Portable Bitmap
-(PBM) format.
-.PP
-Pdftoppm reads the PDF file,
-.IR PDF-file ,
-and writes one PPM file for each page,
-.IR PPM-root - number .ppm,
-where
-.I number
-is the page number.  If
-.I PDF-file
-is \'-', it reads the PDF file from stdin.
-.SH OPTIONS
-.TP
-.BI \-f " number"
-Specifies the first page to convert.
-.TP
-.BI \-l " number"
-Specifies the last page to convert.
-.TP
-.B \-o
-Generates only the odd numbered pages.
-.TP
-.B \-e
-Generates only the even numbered pages.
-.TP
-.BI \-singlefile
-Writes only the first page and does not add digits.
-.TP
-.BI \-r " number"
-Specifies the X and Y resolution, in DPI.  The default is 150 DPI.
-.TP
-.BI \-rx " number"
-Specifies the X resolution, in DPI.  The default is 150 DPI.
-.TP
-.BI \-ry " number"
-Specifies the Y resolution, in DPI.  The default is 150 DPI.
-.TP
-.BI \-scale-to " number"
-Scales the long side of each page (width for landscape pages, height
-for portrait pages) to fit in scale-to pixels. The size of the short
-side will be determined by the aspect ratio of the page.
-.TP
-.BI \-scale-to-x " number"
-Scales each page horizontally to fit in scale-to-x pixels. If
-scale-to-y is set to -1, the vertical size will determined by the
-aspect ratio of the page.
-.TP
-.BI \-scale-to-y " number"
-Scales each page vertically to fit in scale-to-y pixels. If scale-to-x
-is set to -1, the horizontal size will determined by the aspect ratio
-of the page.
-.TP
-.B \-scale-dimension-before-rotation
-Swaps horizontal and vertical size for a rotated (landscape) pdf before scaling instead of after.
-.TP
-.BI \-x " number"
-Specifies the x-coordinate of the crop area top left corner
-.TP
-.BI \-y " number"
-Specifies the y-coordinate of the crop area top left corner
-.TP
-.BI \-W " number"
-Specifies the width of crop area in pixels (default is 0)
-.TP
-.BI \-H " number"
-Specifies the height of crop area in pixels (default is 0)
-.TP
-.BI \-sz " number"
-Specifies the size of crop square in pixels (sets W and H)
-.TP
-.B \-cropbox
-Uses the crop box rather than media box when generating the files
-.TP
-.B \-hide-annotations
-Do not show annotations
-.TP
-.B \-mono
-Generate a monochrome PBM file (instead of a color PPM file).
-.TP
-.B \-gray
-Generate a grayscale PGM file (instead of a color PPM file).
-.TP
-.BI \-displayprofile " displayprofilefile"
-If poppler is compiled with colour management support, this option sets the display profile
-to the ICC profile stored in displayprofilefile.
-.TP
-.BI \-defaultgrayprofile " defaultgrayprofilefile"
-If poppler is compiled with colour management support, this option sets the DefaultGray color space
-to the ICC profile stored in defaultgrayprofilefile.
-.TP
-.BI \-defaultrgbprofile " defaultrgbprofilefile"
-If poppler is compiled with colour management support, this option sets the DefaultRGB color space
-to the ICC profile stored in defaultrgbprofilefile.
-.TP
-.BI \-defaultcmykprofile " defaultcmykprofilefile"
-If poppler is compiled with colour management support, this option sets the DefaultCMYK color space
-to the ICC profile stored in defaultcmykprofilefile.
-.TP
-.B \-png
-Generates a PNG file instead a PPM file.
-.TP
-.B \-jpeg
-Generates a JPEG file instead a PPM file.
-.TP
-.BI \-jpegopt " jpeg-options"
-When used with \-jpeg, takes a list of options to control the jpeg compression. See
-.B JPEG OPTIONS
-for the available options.
-.TP
-.B \-tiff
-Generates a TIFF file instead a PPM file.
-.TP
-.BI \-tiffcompression " none | packbits | jpeg | lzw | deflate"
-Specifies the TIFF compression type.  This defaults to "none".
-.TP
-.BI \-freetype " yes | no"
-Enable or disable FreeType (a TrueType / Type 1 font rasterizer).
-This defaults to "yes".
-.TP
-.BI \-thinlinemode " none | solid | shape"
-Specifies the thin line mode. This defaults to "none".
-.TP
-"solid": 
-adjust lines with a width less than one pixel to pixel boundary 
-and paint it with a width of one pixel.
-.TP
-"shape": 
-adjust lines with a width less than one pixel to pixel boundary 
-and paint it with a width of one pixel but with a shape in proportion
-to its width.
-.TP
-.BI \-aa " yes | no"
-Enable or disable font anti-aliasing.  This defaults to "yes".
-.TP
-.BI \-aaVector " yes | no"
-Enable or disable vector anti-aliasing.  This defaults to "yes".
-.TP
-.BI \-opw " password"
-Specify the owner password for the PDF file.  Providing this will
-bypass all security restrictions.
-.TP
-.BI \-upw " password"
-Specify the user password for the PDF file.
-.TP
-.B \-q
-Don't print any messages or errors.
-.TP
-.B \-progress
-Print progress info as each page is generated.  Three space-separated
-fields are printed to STDERR: the number of the current page, the number
-of the last page that will be generated, and the path to the file
-written to.
-.TP
-.BI \-sep " char"
-Specify single character separator between name and page number, default - .
-.TP
-.B \-forcenum
-Force page number even if there is only one page.
-.TP
-.B \-v
-Print copyright and version information.
-.TP
-.B \-h
-Print usage information.
-.RB ( \-help
-and
-.B \-\-help
-are equivalent.)
-.SH EXIT CODES
-The Xpdf tools use the following exit codes:
-.TP
-0
-No error.
-.TP
-1
-Error opening a PDF file.
-.TP
-2
-Error opening an output file.
-.TP
-3
-Error related to PDF permissions.
-.TP
-99
-Other error.
-.SH JPEG OPTIONS
-When JPEG output is specified, the \-jpegopt option can be used to control the JPEG compression parameters.
-It takes a string of the form "<opt>=<val>[,<opt>=<val>]". Currently the available options are:
-.TP
-.BI quality
-Selects the JPEG quality value. The value must be an integer between 0 and 100.
-.TP
-.BI progressive
-Select progressive JPEG output. The possible values are "y", "n",
-indicating progressive (yes) or non-progressive (no), respectively.
-.TP
-.BI optimize
-Sets whether to compute optimal Huffman coding tables for the JPEG output, which
-will create smaller files but make an extra pass over the data. The value must
-be "y" or "n", with "y" performing optimization, otherwise the default Huffman
-tables are used.
-.SH AUTHOR
-The pdftoppm software and documentation are copyright 1996-2011 Glyph
-& Cog, LLC.
-.SH "SEE ALSO"
-.BR pdfdetach (1),
-.BR pdffonts (1),
-.BR pdfimages (1),
-.BR pdfinfo (1),
-.BR pdftocairo (1),
-.BR pdftohtml (1),
-.BR pdftops (1),
-.BR pdftotext (1)
-.BR pdfseparate (1),
-.BR pdfsig (1),
-.BR pdfunite (1)